Samsung | MX-HS8000 | Samsung MX-HS8000 Benutzerhandbuch

MX-HS8000
PREMIUM HI-FI Component System
user manual
imagine the possibilities
Thank you for purchasing this Samsung
product.
To receive more complete service,
please register your product at
www.samsung.com/register
This Nanum Gothic Eco font is provided by NAVER.
Safety Information
Warning
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This symbol indicates "dangerous
voltage" inside the product that presents
a risk of electric shock or personal
injury.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
WARNING
• To reduce the risk of fire or electric shock, do
not expose this appliance to rain or moisture.
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a
CLASS 1 LASER product. Use of controls,
adjustments or performance of procedures
other than those specified herein may result in
hazardous radiation exposure.
Complies with 21CFR 1040.10 except for
deviations pursuant to Laser Notice No. 50,
dated June 24, 2007.
DANGER :
• VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN. AVOID DIRECT EXPOSURE TO
BEAM. (FDA 21 CFR)
CAUTION :
• CLASS 3B VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN. AVOID EXPOSURE
TO THE BEAM. (IEC 60825-1)
This symbol indicates important
instructions accompanying the product.
• THIS PRODUCT UTILIZES A LASER. USE
OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION
EXPOSURE. DO NOT OPEN COVER AND DO
NOT REPAIR YOURSELF. REFER SERVICING
TO QUALIFIED PERSONNEL.
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1 PRODUCTO
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
LÁSER CLASE 1
• An administration fee may be charged if either
an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user's manual).
you bring the unit to a repair centre and there is no defect in the product
(i.e. where you have failed to read this user's manual).
• The amount of such administration charge will be advised to you before any work or home
visit is carried out.
2
English
Precautions
3
Disc Storage & Management
• Holding Discs
-- Fingerprints or scratches on
a disc may reduce sound
and picture quality or cause
skipping.
-- Avoid touching the surface of a disc where
data has been recorded.
-- Hold the disc by the edges so that
fingerprints will not get on the surface.
-- Do not stick paper or tape on the disc.
• Cleaning Discs
-- If you get fingerprints or dirt
on a disc, clean it with a mild
detergent diluted in water and
wipe with a soft cloth.
-- When cleaning, wipe gently from the
inside to the outside of the disc.
• Disc Storage
`` Do not keep in direct sunlight.
`` Keep in a cool ventilated area.
`` Keep in a clean protection jacket and
store vertically.
English
01 Safety Information
• Ensure that the AC power supply in your
house complies with the identification sticker
located on the back of your product.
• Install your product horizontally, on a
suitable base (furniture), with enough space
around it for ventilation (3 - 4 inches/7.5 10 cm).
• Do not place the product on amplifiers or
other equipment which may become hot.
Make sure the ventilation slots are not
covered.
• Do not stack anything on top of the product.
• Before moving the product, ensure the Disc
Insert Slot is empty.
• To turn off the product completely,
disconnect the AC plug from the wall outlet.
Disconnect the AC plug from the wall outlet
if you will leave the device unused for a long
period of time.
• During thunderstorms, disconnect the AC
plug from the wall outlet. Voltage spikes due
to lightning could damage the product.
• Do not expose the product to direct sunlight
or other heat sources. This could cause the
product to overheat and malfunction.
• Protect the product from moisture, excess
heat, and equipment creating strong
magnetic or electric fields (i.e. speakers.).
• Disconnect the power cable from the AC
supply if the product malfunctions.
• Your product is not intended for industrial
use. It is for personal use only.
• Condensation may occur if your product or
disc has been stored in cold temperatures. If
transporting the product during the winter,
wait approximately 2 hours until the product
has reached room temperature before using.
• The batteries used with this product
contain chemicals that are harmful to the
environment. Do not dispose of batteries in
the general household trash.
• Please check the volume level before playing
not to startle the elderly, infirm and pregnant
woman at a sudden loud sound.
• Place the loudspeakers at a reasonable
distance on either side of the system to
ensure good stereo sound.
• Direct the loudspeakers towards the listening
area.
• Do not expose this apparatus to dripping or
splashing. Do not place objects filled with
liquids, such as vases, on the apparatus.
• To turn this apparatus off completely, you
must disconnect it from the wall outlet.
Consequently, the wall outlet and power
plug must be readily accessible at all times.
• Use only a properly grounded plug and
receptacle.
-- An improper ground may cause electric
shock or equipment damage. (Class l
Equipment only.)
Safety Information
Disc and Format Compatibility
Supported Audio Formats
This product does not support Secure (DRM)
Media files.
File
Extension
CD-R Discs
• Some CD-R discs may not be playable
depending on the disc recording device (CDRecorder or PC) and the condition of the
disc.
• Use 650MB/74 minute CD-R discs.
Do not use CD-R discs over 700MB/80
minutes as they may not be played back.
• Some CD-RW (Rewritable) media may not
be playable.
• Only CD-Rs that are properly "closed" can be
fully played. If the session is closed, but the
disc is left open, you may not be able to fully
play the disc.
MP3-CD Discs
• Only CD-R discs with MP3 files in ISO 9660
or Joliet format can be played.
• MP3 file names should contain no blank
spaces or special characters (. / = +).
• Use discs recorded with a compression/
decompression data rate greater than
128Kbps.
• Only a consecutively written multisession disc
can be played. If there is a blank segment in
the Multisession disc, the disc can be played
only up to the blank segment.
• If the disc is not closed, it will take longer to
begin playback and not all of the recorded
files may play.
• For files encoded in the Variable Bit Rate
(VBR) format,( i.e. files encoded in both
low bit rate and high bit rate - 32Kbps
~ 320Kbps), the sound may skip during
playback.
• A maximum of 999 files can be played per
CD.
4
*.mp3
Audio
Codec
Sampling
Bit Rate
Rate
MPEG 1
Layer3
16KHz ~ 80Kbps ~
48KHz 320Kbps
MPEG 2
Layer3
16KHz ~ 80Kbps ~
48KHz 320Kbps
MPEG 2.5
Layer3
16KHz ~ 80Kbps ~
48KHz 320Kbps
Wave_Format_MSAudio1
16KHz ~ 56Kbps ~
48KHz 128Kbps
Wave_Format_MSAudio2
16KHz ~ 56Kbps ~
48KHz 128Kbps
*.wma
||NOTEs |
✎✎ Does not support WMA Professional codec.
✎✎ The above table shows supported sampling
rates and bit rates. Files of not supported
formats may not be played properly.
English
Contents
14
Safety Information
3
3
4
4
Warning
Precautions
Disc Storage & Management
Disc and Format Compatibility
Supported Audio Formats
Getting Started
7
8
9
10
10
10
16
16
16
17
Front Panel
Rear Panel
Remote Control
17
17
Accessories
Connecting the Speakers
Cautions on Moving the Speakers
11
18
Attaching the toroidal ferrite core to the
power cord
11
18
Looping the power cable around the
toroidal core
18
19
19
Functions
12
12
12
12
12
12
13
13
13
19
The Display function
19
Changing Display mode
The DEMO Music function
Playing a CD
20
Loading a Compact Disc
CD/MP3/CD-R Playback
Selecting a Track
Searching for a Specific Music Passage
on a CD
Repeat One or All Tracks on a CD
5
20
20
20
21
English
Playing USB Devices
USB Device Playback
To Select a File from a USB Device
To Use High Speed Search
To Delete a File
To Move to the Next/Previous Folder
To safely remove a USB device
Read Before Connecting USB Storage
Devices
Searching for a Track Quickly
Using the Program Function
Viewing or Editing Programmed Tracks
Bluetooth
What is Bluetooth?
To connect the Hi-Fi Component to a
Bluetooth device
To disconnect the Bluetooth device from
the Hi-Fi Component
To disconnect the Hi-Fi Component
from the Bluetooth device
Using Bluetooth Power On
TV SoundConnect
To connect the Hi-Fi Component to a
SoundConnect Compatible Samsung TV
To disconnect the TV from the Hi-Fi
Component
To disconnect the Hi-Fi Component
from the TV
Using My Karaoke
Auto Change Function
Listening to the Radio
To Store the Stations You Want
Selecting a Stored Station
Contents
2
14
14
15
15
15
15
15
Contents
21
Timer Function
23
24
25
Basic Recording
Recording Speed
Special Sound Effects
21
21
23
23
25
25
25
26
26
26
27
27
27
27
27
Setting the Clock
Setting the Timer
Cancelling the Timer
The Recording Function
Selecting EQ Mode
FOOTBALL MODE function
GOAL Function
GIGA SOUND Function
BEAT WAVING Function
DJ BEAT Function
+PANNING Funcion
NON-STOP MUSIC RELAY Function
DANCE TIME Function
TEMPO Function
Booting Sound Function
Appendix
28
29
Troubleshooting
Specifications
6
English
Getting Started
Front Panel
2 3 4 5 6 78 9 0! @
k
j
#
$
%
^
i
h
g
f ed c b a ) (
*
&
1
Display Panel
*
VOLUME / DJ button
2
BACKWARD SEARCH/SKIP button
(
+PANNING button
3
CD/Bluetooth button
)
NON-STOP MUSIC RELAY button
4
DISC slot
a
USB 2 jack for Playing and USB Recording
5
GIGA SOUND BEAT button
b
PLAY/PAUSE button
6
TUNER/AUX button
7
FORWARD SEARCH/SKIP button
8
PROGRAM button
c
9
Eject button for Disc
0
VOLUME/SEARCH JOG
!
EQ button
AUX IN 1 jack
Use to connect an external device such
as an MP3 player.
• Connect AUX IN 1 on the front panel
of the product to the Audio Out of an
external device/MP3 player.
• Press the TUNER/AUX button to
select AUX1.
@
SEARCH button
d
MIC jack
POWER button
• Press this button to switch your
product on or off.
e
STOP button
#
f
USB 1 jack for only Playback
g
REMOTE CONTROL SENSOR
$
ENTER button
h
FOOTBALL MODE button
%
USB button
i
BEAT WAVING button
^
USB REC button
j
DISPLAY / DEMO button
&
DJ BEAT button
k
TV SOUNDCONNECT button
7
English
02 Getting Started
1
Getting Started
Rear Panel
1
2
1
2
3
Cooling fan
• The fan operates while the unit is
powered on.
If you set the unit to the minimum
volume, the fan won't operate.
Secure a minimum 6 inches (15 cm)
of clear space on from all sides of the
fan when installing the product.
POWER
• Insert only the provided power cable.
2.2 CH Speaker Terminals
5
4
• LEFT channel (marked , White/
Purple).
• RIGHT channel (marked , Red/
Purple).
• Don't force the Purple SUBWOOFER
connector into the White or Red
speaker jack.
6
1. Use an Audio Cable (not supplied)
to connect AUX IN 2 on the product
to Audio Out on an external analog
output device.
• Be sure to match connector colors.
• If the external analog output device
has only one Audio Out jack, connect
either left or right.
• Press the TUNER/AUX button to
select AUX 2.
• If the product is in AUX mode for
more than eight hours and no
buttons on the front panel or remote
are pushed, the system will turn off.
FM Antenna Terminals
7
LED Terminals for Speaker Beat Waving,
which do not distinguish between left
and right channel.
8
ONLY FOR SERVICE
• This jack is for testing only. Please do
not use.
AUX IN 2 Terminals
1. To achieve the correct sound quality,
when you connect the speakers,
match the color of the speaker plugs
to the color of the speaker jacks. See
below.
3
4 5 67
English
1. Connect the FM antenna to the FM
antenna connector terminal.
2. Slowly move the antenna wire until you
find a location where reception is good,
then fasten it to a wall or other rigid
surface.
3. If reception is poor, you may need
to install an outdoor antenna. To do
so, connect an outdoor FM antenna
to the FM socket on the rear of the
system using a 75Ω coaxial cable (not
supplied).
Remote Control
Power
BEAT WAVING
Bluetooth
CD
TV SoundConnect
USB REC
REC SPEED
USB
TUNING MODE
TUNER/AUX
MO/ST
+PANNING
DJ BEAT
NON-STOP MUSIC RELAY
EFFECT LEVEL
TEMPO
SKIP
SEARCH
PLAY/PAUSE
STOP
REPEAT
GIGA SOUND BEAT
GOAL
FOOTBALL
EQ
DANCE TIME
TUNING/ALBUM ,,.
VOLUME (–, +)
PROGRAM
DELETE
SLEEP (Set a sleep time to shut off the
product.)
TIMER SET
TIMER ON/OFF
AUTO CHANGE
DISPLAY
MY KARAOKE
MIC VOLUME –, +
Installing Batteries In The Remote Control
• Place batteries in the remote control so they
match the polarity of the illustrations in the
battery compartment. : (+) to (+) and (–) to
(–).
• Do not dispose of batteries in a fire.
• Do not short circuit, disassemble, or overheat
the batteries.
• There is a danger of explosion if the battery
is replaced with the wrong battery type.
• The remote control can be used up to
approximately 23 feet (7 meters) in a
straight line from the system.
9
English
02 Getting Started
MUTE (Turn off the sound temporarily.
Press again to turn the sound back on.)
Getting Started
Accessories
Check for the supplied accessories below.
User Manual
FM Antenna
Remote Control/Batteries
Power Cable
Toroidal ferrite core
• Figures and illustrations in this user's manual are provided for reference only and may differ
from actual product appearance.
Connecting the Speakers
Cautions on Moving the Speakers
Recommended speaker setup.
||IMPORTANT |
✎✎ The product may not operate properly if
it is subject to shaking or external shocks
or if the speakers are not installed as
recommended.
• When moving the main unit and speakers,
make sure to separate all connected speaker
cables before.
• When separating the SPEAKERS LIGHTING
cables, press the lock to release the
connector as shown below.
✎✎ Do not stretch the speaker wires or place a
heavy object on them.
10
English
Attaching the toroidal ferrite core to the power cord
1. Pull the fixing tab of the Toroidal ferrite core to
open it.
2. Make two loops around the core with the
power cable. See the illustration below.
3. Attach the Toroidal ferrite core to the power
cord as shown in the illustration below, and
then press it until it clicks.
Looping the power cable around the toroidal core
➜
➜
Lift up to release
the lock and
open the core.
➜
Make two loops around the Close the lock.
core with the power cable.
(Start winding 5 to 10 cm
[2 - 4 in.] away from the
core).
11
English
02 Getting Started
Attaching the Toroidal ferrite core to the power cord helps prevent RF interference from radio
signals.
Functions
The Display function
Playing a CD
You can view functions available on the
display, adjust the brightness of the display
and set the Display/LED either on or off.
Changing Display mode
Press the DISPLAY/DEMO button on the
product.
Each time you press this button, the mode will
change as follows:
• The Dimmer function
The Dimmer function is selected and the
display darkens.
• LED OFF
The Front display LED is turned off while the
dimmer function is working.
• Clock ON
The Clock you set is displayed.
• Display/LED ON
All displays and the LED are turned on.
Loading a Compact Disc
You can play standard compact discs that
require no adapter.
1. Insert a disc gently into the disc slot with
the disc's label facing up. The disc will be
played automatically.
• You can load or unload compact discs
when the radio, USB, or auxiliary source
function is selected. When you press the
8 button, all the other functions will
change to the CD mode.
• If no buttons are pressed on the product
or remote control for more than 3
minutes when the product is in Pause
mode, it will change to Stop mode.
• If no buttons are pressed on the product
or remote control for more than 25
minutes when the product is in Stop
mode, the product will turn off.
The DEMO Music function
Press the DISPLAY/DEMO button on the
product or the DISPLAY button on the remote
control for 5 seconds to start the Demo mode.
Each time you press either of these buttons,
the mode will change as follows:
DIMMER ; LED Off (unit/speaker) ; --:-- [time
display] ; LED On (unit/speaker)
To cancel the Demo Music mode
• Press the DISPLAY/DEMO button on the
product or DISPLAY button on the remote
control again for 5 seconds.
The DEMO mode is cancelled and the
product is turns off.
• Press TUNER/AUX, CD/Bluetooth or USB
button on the product.
The DEMO mode is cancelled and the mode
is changed to the mode you selected.
||NOTEs |
✎✎ When the DEMO music function is on, only
the POWER ( ), VOL, MUTE ( ) buttons
and the buttons mentioned above work.
CD/MP3/CD-R Playback
||IMPORTANT |
✎✎ This product is designed to play the
following audio disc types: CD, CD-R, CDRW.
1. Insert a disc gently into the disc slot with
the disc's label facing up.
2. The disc is played automatically.
• For MP3/WMA file, it may take several
minutes for the product to finish
scanning the disc tracks.
• If you play a file with an English title, the
song title will be shown in the display.
(Titles in other languages can not be
displayed.)
• An English-titled track containing a
special character (@, $, *, etc.) will not
be displayed.
<CD Playback Display>
Track Indicator
✎✎ The DEMO sampler plays for 3 minutes;
only the message remains displayed on the
front panel after its playback.
12
English
Playtime
Indicator
3. To adjust the volume:
• Turn the VOLUME control on the
product.
Selecting a Track
4. Pausing playback
Main Unit
To pause playback temporarily, press the
button.
again to continue playing the
Press
disc.
Remote control
To pause playback temporarily, press the
button.
button to continue playing
Press the
the disc.
5. To end playing, press the 5 button.
To play the previous track
Press the 1 button within 3 seconds after the
current track has started playing.
Press the 1 button twice, 3 seconds or more
after the current track starts playing.
To play the next track
Press the 2 button.
To play the current track from the
beginning
Press the 1 button, 3 seconds after the
current track started playing.
To play the track of your choice
||NOTEs |
✎✎ If no CD is in the disc slot, "NO DISC"
appears on the display.
Press the 1 or 2 button to move to a desired
track.
✎✎ The quality of MP3/CD-R playback may vary
depending on the condition of the disc or
the condition of the recorder used to create
the disc.
✎✎ If a disc contains different types of files or
unnecessary folders, you will have problems
with playback.
✎✎ Gently insert a CD into the disc slot. Do not
apply excessive force.
-- Do not apply force to the product or
place a heavy object on the product.
-- Do not insert an out-of-spec or oddly
shaped CD (heart shaped, octangular,
etc.).
You can damage the product.
-- Carefully maintain your CDs.
Searching for a Specific Music Passage
on a CD
When listening to a CD, you can quickly search
for a specific music passage on a track.
Forward Search....................3
Backward Search..................4
You can also press and hold the 1, 2
buttons on the product to automatically scan
for a track.
Repeat One or All Tracks on a CD
You can play a CD or tracks on a CD
repeatedly.
1. Press the REPEAT button on the remote
control.
Each time you press this button, the mode
changes as follows:
MP3 : OFF ; TRACK ; DIR ; ALL ; RANDOM
CD : OFF ; TRACK ; ALL ; RANDOM
13
English
03 Functions
• Press the VOL+ or VOL- button on the
remote control.
The volume level can be adjusted in 31
steps (VOLUME MIN, VOLUME 01 ~
VOLUME 29, and VOLUME MAX).
You can select a desired track while the disc is
being played.
Functions
2. When you want to stop the repeat
function, press the REPEAT button until
"OFF" is displayed.
• OFF : Cancels repeat playback.
• TRACK : Repeatedly plays the selected
track.
• DIR (DIRECTORY) : Repeatedly plays all
tracks in the selected folder.
• ALL : Repeatedly plays the entire disc.
• RANDOM : Plays tracks in random order.
Playing USB Devices
Connect an external storage device such as
a USB flash memory or external HDD (Hard
Disk Drive) to the product. You can play files in
MP3/WMA format.
USB Device Playback
To Select a File from a USB Device
You can select an MP3 file while the product is
playing.
||NOTEs |
✎✎ If you want to move to the previous/next
track, press the 1, 2 buttons briefly.
-- The unit moves to the previous/next track
within the directory.
- If you press the 1, 2 buttons more
times than the number of the files in
the directory, the unit moves to the next
directory.
To repeat
1. Press the REPEAT button.
Each time you press this button, the mode
changes as follows:
OFF ; TRACK ; DIR ; ALL ; RANDOM
1. Connect the external USB storage device
to your product.
2. Select the USB mode by pressing the USB
button on the product or the USB button
on the remote control.
2. When you want to stop the repeat
function, press the REPEAT button until
"OFF" is displayed.
• OFF : Cancels repeat playback.
• TRACK : Repeatedly plays the selected
file.
3. The first file of the first directory plays
automatically.
• DIR (DIRECTORY) : Repeatedly plays all
files in the selected folder.
4. To stop playing
Press the 5 button to stop playing.
||NOTEs |
✎✎ To remove the USB device
-- If you press the 5 button again, you can
remove the USB device safely.
||IMPORTANT |
✎✎ Do not connect a USB recharger to the USB
port of this product. You can damage the
product.
14
• ALL : Repeatedly plays all files.
• RANDOM : Plays files in random order.
||NOTEs |
✎✎ If the file selected to be played is located in
a folder all the files within that folder are
played in random order. If the file selected
is located in the root folder all files will be
played in random order.
English
To Use High Speed Search
||IMPORTANT |
✎✎ The product does not output sound during
a high speed search.
✎✎ You can also press and hold the 1 or 2
button on the main unit to automatically
scan for a track.
To Delete a File
You can delete a file from your USB device.
1. Select a file you want to delete.
2. Press the DELETE button on the remote
control. "DELETE NO" is displayed.
3. Press the DELETE button on the remote
control and "DELETE YES" is displayed.
4. Press the ¬ button. "DELETE END"
appears and deletion is completed.
To Move to the Next/Previous Folder
Press the TUNING/ALBUM , / . button on
the remote control to move to the previous/
next folder.
||NOTEs |
✎✎ When sound files are stored in the root
directory rather than in a folder, press the
TUNING/ALBUM , / . button to go to the
first TRACK.
To safely remove a USB device
1. Press the 5 button twice while the USB is
playing or press the 5 button once when
play has stopped.
2. When the REMOVE message appears on
the display, remove the USB device.
15
• Some USB devices may not work properly
with this product.
• This product only supports external HDD's
that are formatted in the FAT file system.
• USB 2.0 HDDs should be connected to a
separate power source. Otherwise, the USB
2.0 HDDs will not work.
• If multiple USB external storage are
connected together, only the MP3 files in
the first HDD will be played.
• Files with Digital Rights Management
(DRM) are not supported. DRM restricts
unauthorized access to a DRM file so that
file is protected from piracy.
• Even if a file has an .mp3 extension, the file
cannot be played if it is formatted in MPEG
layer 1 or 2.
• Do not use an unrecognized USB hub.
• Only the first 15 characters of an audio file
name are shown on the product's display.
• Only removable HDDs with less than 160GB
are supported. Depending on the device, a
160GB- or more removable HDD may not be
supported.
• It can take several minutes for the product to
recognize the files on some USB devices.
• Some USB devices (USB HDDs, in particular)
may cause a delay when moving from track
to track.
• With USB storage devices supporting
USB VER1.1 only, the product may access
files slowly or may not recognize the file
properties.
• The maximum electrical current provided by
each USB port to connected USB devices is
0.5A (based on DC 5V).
• If there is no USB connection or STOP mode
lasts for more than 25 minutes, the product
will automatically turn off.
• Some USB devices, digital cameras, USB card
readers, iPods, iPhones, and Smart Phones
may not be supported.
English
03 Functions
You can search a desired section quickly while
the product is playing.
Press the 3, 4 button.
• Each time you press the button, you move
through the section forward/backward
quickly.
Read Before Connecting USB Storage
Devices
Functions
• If you eject the disc, CD programming is
cancelled.
If you turn off the product, CD/USB
programming is cancelled.
Searching for a Track Quickly
You can select a track directly without the 1,
2 button.
CDDA/MP3-CD/USB
1. Press the SEARCH button.
After pressing the SEARCH button, turn
the VOLUME/SEARCH JOG control on
the product to the left or right to select a
desired track.
• You can move to the selected track
directly.
2. When searching is done, the track will
automatically start playing.
||NOTEs |
✎✎ CD/USB program play will continue if you
try to switch to another mode.
✎✎ USB REC, DELETE and TUNING/ALBUM
buttons will not work in Program mode. If
you press such buttons in Program mode,
“PROGRAM PLAY” will be displayed instead.
✎✎ If a file in the program to be played was not
in a supported format, playback skips to the
next file automatically.
Viewing or Editing Programmed Tracks
Using the Program Function
This function is not available during playback
of an MP3-CD/USB.
• You can program the playback order of up
to 99 tracks of your choice.
• However, you must stop playing the CD/USB
before selecting tracks.
1. While in CD/USB playback mode, press the
5 button to stop playing the CD/USB.
2. Press the PROGRAM button to display the
message below:
PROG 01 TRACK--(01= program number, ---= track number)
3. Use the 1 or 2 button or the VOLUME/
SEARCH JOG to move to a desired track.
• Press 1 to move to the previous track.
• Press 2 to move to the next track.
You can view and edit a list of programmed
tracks.
1. If a programmed track is being played,
press the 5 button once.
2. Press the PROGRAM button twice to
display the message below:
SAVED 01 TRACK002
(01= program number, 002= track number)
3. Repeatedly press the ¬ button until the
desired track is displayed.
4. Press the 1 or 2 button to select a
different track.
5. Press the ¬ button to confirm your
selection.
6. To play the programmed tracks, press the
button.
To repeat
4. Press the ¬ button to confirm your
selection. The selection is stored and
is displayed.
5. To select another track, follow Steps 3 and
4 above.
1. Press the REPEAT button.
Each time you press this button, the mode
changes as follows:
OFF ; TRACK ; ALL
6. Press the
button to play the
programmed tracks.
7. Press the 5 button to stop playing the
programmed tracks, Press the 5 button
again to cancel playing the programmed
tracks.
16
English
Bluetooth
What is Bluetooth?
Bluetooth is a technology that enables
Bluetooth compliant devices to interconnect
easily with each other using a short, wireless
connection.
• A Bluetooth device may cause noise or
malfunction, depending on usage, when:
-- A part of your body is in contact with
the receiving/transmitting system of the
Bluetooth device or the Hi-Fi Component.
-- It is subject to electrical variation from
obstructions caused by a wall, corner, or
office partitioning.
-- It is exposed to electrical interference from
same frequency-band devices including
medical equipment, microwave ovens, and
wireless LANs.
• Pair the Hi-Fi Component with the Bluetooth
device while they are close together.
• The greater the distance between the Hi-Fi
Component and the Bluetooth device, the
worse the quality. If the distance exceeds the
Bluetooth operational range, the connection
is lost.
• In poor reception areas, the Bluetooth
connection may not work properly.
• The Bluetooth connection only works
when the Bluetooth device and the HiFi Component are close together. The
connection will be automatically cut off
if the Bluetooth device is out of range.
Even within range, the sound quality may
be degraded by obstacles such as walls or
doors.
• This wireless device may cause electric
interference during its operation.
Before you begin, confirm that your Bluetooth
device supports the Bluetooth-compliant
stereo headset function.
1. Press the CD/Bluetooth button of the HiFi Component to display the BLUETOOTH
message.
• You will see WAIT for a short period
of time and then READY on the front
display of the Hi-Fi Component.
2. Select the Bluetooth menu on the Bluetooth
device you want to connect. (Refer to the
Bluetooth device's user manual.)
3. Select the Stereo headset menu on the
Bluetooth device.
• You will see a list of scanned devices.
4. Select "[Samsung] HI-FI XXXXXX" from
the list.
• When the product is connected to
the Bluetooth device, it will display
CONNECTED ; BLUETOOTH on the
front display.
• If the Bluetooth device has failed to pair
with the product, delete the previous
"[Samsung] HI-FI XXXXXX" found by the
Bluetooth device and have it search for
the product again.
5. You can listen to the music playing on the
connected Bluetooth device over the Hi-Fi
Component system.
• In Bluetooth mode, some model's
Play/Stop/Next/Back functions are not
available.
||NOTEs |
The product only supports Middle Quality
SBC data (up to 237kbps@48kHz), and
does not support High Quality SBC data
(328kbps@44.1kHz).
✎✎ The AVRCP feature is not supported.
✎✎ Connect only to a Bluetooth device that
supports the A2DP (AV) function.
✎✎ You cannot connect to a Bluetooth device
that supports only the HF (Hands Free)
function.
17
English
03 Functions
You can use a Bluetooth device to enjoy music
with high quality stereo sound, all without
wires!
To connect the Hi-Fi Component to a
Bluetooth device
Functions
✎✎ Only one Bluetooth device can be paired at
a time.
✎✎ Once you have turned off the Hi-Fi
Component and the pairing is disconnected,
the pairing will not be restored
automatically. To reconnect, you must pair
the device again.
✎✎ The Hi-Fi Component system may not
search or connect properly in the following
cases:
-- If there is a strong electrical field around
the Hi-Fi Component.
- If several Bluetooth devices are
simultaneously paired with Hi-Fi
Component.
-- If the Bluetooth device is turned off, not
in place, or malfunctions.
-- Note that such devices as microwave
ovens, wireless LAN adaptors, fluorescent
lights, and gas stoves use the same
frequency range as the Bluetooth device,
which can cause electric interference.
To disconnect the Bluetooth device
from the Hi-Fi Component
You can disconnect the Bluetooth device from
the Hi-Fi Component. For instructions, see the
Bluetooth device's user manual.
• The Hi-Fi Component will be disconnected.
• When the Hi-Fi Component is disconnected
from the Bluetooth device, the Hi-Fi
Component displays DISCONNECTED ;
READY on its display.
To disconnect the Hi-Fi Component
from the Bluetooth device
Press another mode button on the front
panel of the Hi-Fi Component to switch from
Bluetooth mode to another mode or turn off
the Hi-Fi Component. The currently connected
device is disconnected.
||NOTEs |
✎✎ The connected Bluetooth device will wait a
certain amount of time for a response from
the Hi-Fi Component before terminating the
connection. (Disconnection time may differ,
depending on the Bluetooth device)
18
✎✎ In Bluetooth connection mode, the
Bluetooth connection will be lost if the
distance between the Hi-Fi Component and
the Bluetooth device exceeds 16.25 feet (5
meters).
✎✎ If the Bluetooth device comes back into the
effective range after disconnecting, you can
restart the Hi-Fi Component to restore the
pairing with the Bluetooth device.
✎✎ The Hi-Fi Component automatically turns
off after 25 minutes in the Ready mode.
✎✎ When a Bluetooth device is connected
to the Hi-Fi Component system, the HiFi Component System automatically
switches to the Bluetooth mode if it was in
a different mode.
Using Bluetooth Power On
When the product is turned off, you can
connect your smart device to the product via a
Bluetooth connection to turn it on.
1. Press and hold the Bluetooth button on
the remote to set the Bluetooth Power On
function On. Bluetooth Power On appears
on the display.
2. When the product is off, connect
your smart device to the product via
Bluetooth. (For information on Bluetooth
connections, refer to your smart device's
manual.)
3. When the connection is complete, the
product turns itself on automatically in
Bluetooth mode.
• Select the desired music to play from
your smart device.
||NOTEs |
✎✎ Press and hold the Bluetooth button on the
remote control to turn the Bluetooth Power
On function on or off.
Each time you press and hold this button,
the Hi-Fi Component displays Bluetooth
Power On ; Off on its display.
English
✎✎ Only one Hi-Fi Component can be
connected to a TV via TV SoundConnect.
TV SoundConnect
To connect the Hi-Fi Component to a
SoundConnect Compatible Samsung
TV
Before activating this function, be sure to
set the Samsung TV's SoundConnect or
SoundShare function to On.
1. Press the TV SoundConnect button of
the Hi-Fi Component to display the TV
SOUNDCONNECT message.
WAIT ; SEARCH ; REQUEST
2. Set Add New Device to On in the TV's
SoundConnect Settings menu. (Refer to
the TV's user manual for details.)
3. When the Hi-Fi Component is connected
to the TV, it will display [TV] Name ;
CONNECTED on the front display.
4. The audio from the connected TV plays
over the Hi-Fi Component system.
||NOTEs |
✎✎ The SoundConnect feature is available on
some Samsung TVs released since 2012.
Check whether your TV supports the
SoundShare or SoundConnect function.
(For further details, refer to the TV's user's
manual.)
✎✎ If you unplug the Hi-Fi Component, the TV
SoundConnect connection is terminated. To
re-establish the connection, plug the Hi-Fi
Component into an outlet, and then set the
TV SoundConnect connection again.
19
✎✎ To connect to another TV in TV
SoundConnect at time, press the
button
for more than 5 seconds, and then connect
to the other TV by following the directions
above.
To disconnect the TV from the Hi-Fi
Component
You can disconnect the TV from Hi- Fi
Component.
For instructions, see the TV's user manual.
• When the Hi-Fi Component is disconnected
from the TV, the Hi-Fi Component displays
DISCONNECTED ; REQUEST on its display.
To disconnect the Hi-Fi Component
from the TV
Press another mode button on the front panel
of the Hi-Fi Component to switch from TV
SoundConnect mode to another mode or
turn off the Hi-Fi Component. The currently
connected device is disconnected.
||NOTEs |
✎✎ The connected TV will wait a certain
amount of time for a response from the
Hi-Fi Component before terminating the
connection.(Disconnection time may differ,
depending on the TV)
✎✎ The connection may be lost or sound may
stutter if the distance between the TV and
the Hi-Fi Component exceeds 6.5 feet (2 m).
✎✎ Instability in the network environment may
cause the connection to be lost or sound to
stutter.
✎✎ The Hi-Fi Component automatically turns
off after 25 minutes if it is not connected to
a TV.
English
03 Functions
You can listen to the sound from your
SoundConnect Compatible Samsung TV
through the Hi-Fi Component by using the TV
SoundConnect function.
Functions
Using My Karaoke
Auto Change Function
You can use the MY Karaoke function to sing
along with your favorite CDs and USB tracks.
You can circularly play between the disc and
the USB.
1. Connect the microphone to the MIC jack
on the front of the product.
• If your microphone plug is larger than
the 3.5 mm MIC jack, you need a
Connector-Adaptor (not supplied) to
complete the connection.
-- First, connect the Connector-Adaptor
to the MIC jack on the front of the
product,
-- Second, connect the microphone
(with larger jack) to the ConnectorAdaptor.
1. Press the AUTO CHANGE button to
select a mode and press ¬ to apply your
selection.
• If Program Play has not been set in
CD/USB
AUTO CHANGE OFF ; AUTO CHANGE ALL
• If Program Play has been set in CD/USB
AUTO CHANGE OFF ; AUTO CHANGE ALL ;
AUTO CHANGE PROGRAM
• When the AUTO CHANGE mode is
"ALL",
-- the music will be played on DISC ;
USB1 ; USB2 continuously.
-- if you press the POWER button,
function change button or the EJECT
button, the AUTO CHANGE function
automatically switches to "OFF" mode.
-- the recording can't work.
-- the REPEAT function can't work and
automatically changes to OFF.
-- the REC SPEED, USB REC button can't
work.
2. Press the MIC VOL-, + button on the
remote control to adjust the volume of
the microphone.
3. Press the MY KARAOKE button on the
remote control to suppress the vocal if you
need to. Each time you press the button,
the selection changes as follows:
MY KARAOKE ON ; MY KARAOKE OFF
• If you hear strange noises (squealing
or howling) while using the Karaoke
feature, move the microphone away
from the speakers. Turning down the
microphone's volume or the speaker
volume is also effective. Do not aim the
MICROPHONE towards the SPEAKERS.
• The microphone does not operate in the
AUX and TUNER mode.
• If you connect a microphone, GIGA
SOUND automatically turns off. To turn
Giga Sound back on you must remove
the microphone, and then press the
GIGA SOUND BEAT button.
• When My Karaoke is on, GIGA SOUND
does not work.
• When you turn My Karaoke off, all My
Karaoke settings are lost.
• My Karaoke is only available when a
microphone is connected to the Hi-Fi
Component.
• My Karaoke does not operate in the
Bluetooth, TV SoundConnect, FM and
AUX mode.
20
• When USB is playing, if you disconnected
the USB, the AUTO CHANGE function
automatically switches to "OFF" mode.
• If there's no USB1, it will jump to USB2.
Listening to the Radio
To Store the Stations You Want
You can store up to:
15 FM stations.
1. Select FM by pressing the TUNER/AUX
button.
2. To search for a station, press the TUNING
MODE button on the remote control or
the @ button on the product one or more
times until MANUAL is displayed.
English
4. Press the MO/ST button to switch
between stereo and mono.
• In a poor reception area, select MONO
for a clear, interference-free broadcast.
• This applies only when listening to an
FM station.
5. If you do not want to store the radio
station found, go back to Step 3 and
search for another station.
Timer Function
Setting the Clock
For each step, you have a few seconds to set
the required options. If you exceed this time,
you must start again.
1. Press the TIMER SET button on the remote
control twice. "CLOCK SET" is displayed.
2. Press the ¬ button on the remote
control. The hour flashes.
• To increase the hours: TUNING/ALBUM ,
• To decrease the hours: TUNING/ALBUM .
Otherwise:
a. Press the ¬ button.
b. Or, press the TUNING/ALBUM button
on the remote control to select a
program number in the PRESET mode.
c. Press the ¬ button to save the preset.
6. To store other radio frequencies, repeat
Steps 3 to 5.
Selecting a Stored Station
To listen to a stored station, follow these steps:
1. Select FM by pressing the TUNER/AUX
button on the product or remote control.
2. Press the TUNING MODE button on the
remote control until "PRESET" is displayed.
3. Press the 1, 2 buttons on the main unit
or the TUNING/ALBUM ,, . buttons
on the remote control to select a preset
number.
3. When the correct hour is displayed, press
the ¬ button, and then the minutes
flash.
• To increase the minutes: TUNING/ALBUM ,
• To decrease the minutes: TUNING/ALBUM .
4. When the correct minute is displayed,
press the ¬ button. "TIMER PLAY SET"
appears in the display.
Setting the Timer
The timer enables you to set the product to
switch on or off at specific times automatically.
• Before setting the timer, check that the
current time is correct.
• For each step, you have a few seconds to set
the required options. If you exceed this time,
you must start again.
• If you no longer want the product to be
switched on or off automatically, you must
cancel the timer by pressing the TIMER
ON/OFF button.
Example: You want to wake up to
music every morning.
1. Press the TIMER SET button until TIMER
PLAY SET is displayed.
2. Press the ¬ button.
Result: ON TIME is displayed for a few
seconds. You can set the timer switch-on
time.
21
English
03 Functions
3. Find a station by:
• Pressing and holding the TUNING/
ALBUM , or . button on the remote
control to automatically search for
broadcasting stations.
Functions
3. Set the timer switch-on time.
7. Press the ¬ button.
Result: TIMER REC SET (Do you want to
record?) is displayed.
a. Press the TUNING/ALBUM , or .
button to set the hours.
b. Press the ¬ button.
Result: The minutes flash.
c. Press the TUNING/ALBUM , or .
button to set the minutes.
d. Press the ¬ button.
Result: OFF TIME is displayed for a few
seconds. You can now set the timer
switch-off time.
8. Press the ¬ button.
Result: REC SET YES/NO is displayed. You
can press the TUNING/ALBUM , or .
button to select REC YES or REC NO, and
then press ¬ button.
1) If you select REC NO, it will cancel
tuner timer recording and any currently
set tuner timer recording. Note that
selecting REC NO does not cancel the
Timer setting.
4. Set the timer switch-off time.
a. Press the TUNING/ALBUM , or .
button to set the hours.
2) If you select REC YES, you can set the
tuner timer recording on and off times.
b. Press the ¬ button.
Result: The minutes flash.
c. Press the TUNING/ALBUM , or .
button to set the minutes.
a. Press the ¬ button.
Result: ON TIME is displayed for a
few seconds. You can set the tuner
timer recording switch-on time.
d. Press the ¬ button.
Result: VOLUME XX is displayed, where
XX corresponds to the volume already
set.
b. Press the ¬ button.
Result: OFF TIME is displayed for a
few seconds. You can set the tuner
timer recording switch-off time.
5. Press the TUNING/ALBUM , or . button
to adjust the volume level and press the
¬ button.
Result: The source to be selected is
displayed.
6. Press the TUNING/ALBUM , or . button
to select the source the Hi-Fi Component
will play when it switches on.
If you select
You must also
FM (radio)
a. Press the ¬ button.
b. Select a preset
station by pressing
the TUNING/ALBUM
, or . button.
CD (compact
disc)
Load a compact disc.
USB
Connect a USB device.
||NOTEs |
✎✎ Tuner timer recording On/Off times can
differ from Timer On/Off times.
✎✎ If the timer switch on and off times are
identical, the word ERROR is displayed.
✎✎ You can use the 1, 2 buttons on the
product instead of the TUNING/ALBUM ,
or . button to make adjustments in Steps
3 through 8.
✎✎ If the switch-on or -off time is the same as
the timer recording time, only the switchon or -off time is effective, and the timer
recording is not applied.
✎✎ When you use the auto timer, you may
need an additional step to use a CD or USB
device with it, depending on the disc (or
device). Consequently, it is easier to use the
tuner instead.
✎✎ If you select CD or USB mode when there
is no disc or no USB in the product, it will
automatically change to TUNER.
22
English
USB 1 (Recording device is on USB 2)
After you have set the timer, it will start
automatically. When it starts, the TIMER ON
message appears on the display. If you no
longer want to use the timer, you must cancel
it.
• To cancel the timer, Press the TIMER ON/OFF
button once.
• To restart the timer, Press the TIMER ON/OFF
button once again.
• Connect the USB device with the files
you want to record to USB 1 jack.
||NOTEs |
✎✎ When you select the TIMER OFF mode, the
TIMER RECORDING and TIME function are
not available.
• Press the USB button to select USB 1.
• Play a song from the USB 1.
External Source
• Connect an External device/MP3 player
to the product.
• Press the TUNER/AUX button to select
AUX IN 1 or AUX IN 2.
• Play a song from the external device.
3. Press the USB REC button on the remote
control to start recording.
CD
The Recording Function
• CD recording starts and "TRACK
RECORD" and the current track number
appear on the display alternately.
Basic Recording
You can record from a CD, a USB device, a
radio broadcast, or an external source to a USB
storage device.
• If you want to record all the tracks on
the disc, press and hold the USB REC
button. "FULL CD RECORD" is displayed.
1. Connect an external USB storage device to
) jack on your product. You
a USB (
can use USB 2.
RADIO
• "TUNER RECORD" is displayed and
recording starts.
2. Play a disc or USB, turn on the radio and
select a station, or connect an external
source to your product as described
below.
CD-ROM/USB
• "FILE COPY" is displayed and recording
starts.
CD
• You can also copy a folder containing
MP3/WMA files to a device on USB
2. Press and hold the USB REC button
while the system plays an MP3 or WMA
file located in a folder. Your system
displays "FOLDER COPY", and will record
all the files in that folder.
• Press the CD button on the product to
select the CD function.
• Insert a CD gently into the disc slot.
• Use the CD selection (1 or 2) buttons
to select the desired song.
TUNER
• When the recording is done, "STOP" is
displayed.
• Select FM by pressing the TUNER/AUX
button.
• If there is a file with the same name
on the USB 2 device, "EXIST FILE" is
displayed, and the function is canceled.
• Select the radio frequency you want to
record.
23
English
03 Functions
Cancelling the Timer
Functions
• If a microphone is connected to the
product and you press the USB REC
button, you activate the MP3 Recording
function, not the Copy function.
• Press the USB REC button for a second
to start FILE COPY. Press and hold the
USB REC button for a few seconds to
start FOLDER COPY.
External Source
• "AUX RECORD" is displayed and
recording starts.
✎✎ When you use the CD high speed search
function, the CD recording function is
unavailable.
✎✎ With some USB devices, recording time may
be longer.
✎✎ In the Program mode, you can't use the
recording function.
✎✎ When the Recording function is active,
the EQ and GIGA SOUND functions
automatically turn off and are unavailable.
✎✎ During a CD recording, the REPEAT function
automatically turns off and is unavailable.
✎✎ If you use the MIC function during a CD
recording, the voice from the microphone
will be recorded.
CD/USB1(MP3) & MIC
• "MP3 RECORD" is displayed and
recording starts.
4. To stop recording, press the 5 button.
The recording is automatically saved as an
MP3 file.
5. After the recording is finished, a directory
named "RECORDING"(CD-DA), "COPY"
(CD-ROM/USB), "TUNER RECORDING",
"AUX RECORDING" or "MP3 RECORDING"
is created in your device.
||NOTEs |
✎✎ WMA/MP2 files can only be copied not
recorded.
✎✎ You can not record audio from the radio
when searching for a station or if there are
no frequencies available when the product
is set to Tuner mode.
✎✎ Note that setting the input level too loud
when recording music from an external
device through the AUX or USB channel
may introduce noise into the recording.
If this occurs, lower the external device's
volume level.
Recording Speed
✎✎ Do not disconnect the USB device or the AC
Cord during recording. You can cause file
damage.
✎✎ If you disconnected the USB device during
recording, the product will turn off and you
will not be able to delete the file that has
been recorded. If this occurs, connect the
USB device to a PC, back up the USB data to
the PC, and then reformat the USB device.
✎✎ If the USB device does not have enough
memory, "NOT ENOUGH MEMORY" will
appear on the display.
✎✎ The Recording function supports the FAT
file systems only. The NTFS file system is not
supported.
Each time you press the REC SPEED button on
the remote control, the recording speed will
change as follows:
RECORD SPEED x 1 ; RECORD SPEED x 4
• When you record from the tuner or an
external source, you cannot change the
recording speed.
• If you select RECORD SPEED X 4, sound is
not produced during the recording.
• If you connect the microphone, you have
one recording speed mode available:
RECORD SPEED X 1.
• During recording, if you disconnect the
microphone, the recording will stop. If you
reconnect the microphone, the recording
will not restart.
||NOTEs |
✎✎ Even when RECORD SPEED x4 is set,
recording may not be made in x4 speed
depending on the used USB storage device.
24
English
Special Sound Effects
Your Hi-Fi Component system provides
predefined equalizer settings that are optimized
for particular music genre. You can also adjust
the bass, middle, and treble levels manually.
1. Press the EQ button.
Each time you press the EQ button or turn
the VOLUME/SEARCH JOG control on the
product, the mode changes as follows:
OFF ; FLAT ; RANCHERA ; CUMBIA
; REGGAE ; MERENGUE ; SALSA ;
REGGATON ; FOLKLORE ; PARTY ; POP
; HIP-HOP ; ROCK ; JAZZ ; CLASSIC ;
ELEC-TRONIC ; MP3 ENHANCER ; VIRTUAL
SOUND ; USER EQ
2. To set the BASS, MID (Middle), and TREB
(Treble) levels manually, select USER EQ,
and then press the ¬ button.
Result: The BASS level (left numeric)
flashes.
Press the 1 or 2 button on the product
or TUNING/ALBUM ,, . button to select
a level from -06 to 06.
Then, press the ¬ button.
Result: The MIDDLE level (middle numeric)
flashes.
Press the 1 or 2 button on the product
or TUNING/ALBUM ,, . button to select
a level from -06 to 06.
Then, press the ¬ button.
Result: The TREBLE level (right numeric)
flashes.
Press the 1 or 2 button on the product
or TUNING/ALBUM ,, . button to select
a level from -06 to 06.
Then, press the ¬ button.
Result: Setting is complete.
25
✎✎ If no buttons are pressed within 8 seconds,
your settings will automatically be cancelled
and the previous settings will be saved.
✎✎ The EQ mode may be different depending
on your region.
✎✎ Use the VOLUME/SEARCH JOG to alter the
EQ mode, and the selected EQ mode will be
applied after 2 seconds.
✎✎ Use the VOLUME/SEARCH JOG to alter
the EQ mode and press ¬. EQ screen
disappears.
FOOTBALL MODE function
The football mode brings greater realism to
sports broadcasts.
1. Press the FOOTBALL MODE button on the
product.
Each time you press this button, the mode
changes as follows:
OFF ; ANNOUNCER ; STADIUM
2. To cancel this function, press the
FOOTBALL MODE button until "OFF" is
displayed.
GOAL Function
Press this button to add the sound of cheering
while watching a football game.
1. Press the GOAL button on the remote
control.
Each time you press this button, the mode
changes as follows:
GOAL ON ; GOAL OFF
2. To cancel this function, press the GOAL
button until "GOAL OFF" is displayed.
English
03 Functions
Selecting EQ Mode
||NOTEs |
✎✎ When the Hi-Fi Component is recording,
the EQ function is turned off automatically
and is unavailable.
Functions
||NOTEs |
✎✎ Press the GOAL button to output the
currently playing sound file mixed with the
GOAL sound.
GIGA SOUND Function
The GIGA SOUND function amplifies the
bass sound and provides twice the bass for
powerful, realistic sound.
1. Press the GIGA SOUND BEAT button on
the main unit or the GIGA button on the
remote control. Each time you press this
button, the mode changes as follows:
GIGA SOUND BEAT ; GIGA SOUND OFF
2. To cancel this function, press the GIGA
SOUND BEAT button until "GIGA SOUND
OFF" is displayed.
||NOTEs |
✎✎ The GIGA SOUND mode may be different
depending on your region.
BEAT WAVING Function
The Beat Waving function lets you change the
Speaker LED display mode.
1. Press the BEAT WAVING button on the
product or on the remote control.
Each time you press this button, the mode
changes as follows:
STARDUST ; EMERALD MOON ; SOLAR
BOMB ; SHOOTING STAR ; STAR ;
PARTY 1 ; PARTY 2 ; FUN 1 ; FUN 2 ; PURE
; FRESH ; LOVE ; JOY ; SUNSET ; SUNRISE
; NATURE 1 ; NATURE 2 ; WAVE 1 ; WAVE
2 ; AURORA ; OFF
||NOTEs |
✎✎ If you select BEAT WAVING OFF, all the
speaker LED displays are turned off.
26
DJ BEAT Function
The DJ Beat function lets you turn on the DJ
Beat sound effect functions. The level of each
effect is adjustable.
Press the DJ BEAT button on the remote
control or on the product.
Each time you press this button, the mode
changes as follows:
||IMPORTANT |
✎✎ You can set each of the DJ Beat functions
from -15 to +15. The initial setting for all
functions is 0.
• FLANGER : Creates an effect similar to the
sound of a jet engine revving up and down.
• CHORUS : Creates an effect similar to a
singing chorus.
• WAHWAH : Creates a 'Wah~ Wah~' effect.
• TREMOLO : Repeatedly and rapidly turns the
volume up and down.
• FUZZ : Distorts the original sound to make it
harder and harsher.
• PHASER : Alters the original sound from
clear to dull.
• SLAPBACK : Creates the effect of a slapback
echo following the original sound.
• DJ BEAT OFF : Turns off this function.
||NOTEs |
✎✎ The red LED turns on around the button you
pushed and around the DJ BEAT button.
✎
✎ You can control the intensity of the effect
with the Volume Jog. To control the volume,
press the product's VOLUME/DJ button.
✎✎ To cancel an effect, press the effect's button
again.
✎✎ You can also control the effect using
the EFFECT LEVEL button on the remote
control.
✎✎ Use the Volume Jog to control the intensity
of the effect that was activated last. For
example, if you activated the WahWah
effect and then the Panning effect, the
Volume Jog will control the Panning effect.
✎✎ To control the intensity of the effect you
applied first, press the button of effect that
you applied last to turn it off. Then, you can
use the Volume Jog to control the intensity
of the first effect.
English
+PANNING Funcion
||NOTEs |
✎✎ To apply the PANNING effect to another
effect, press the +PANNING button when
the other effect is active or press another
effect button when the PANNING effect is
active.
NON-STOP MUSIC RELAY Function
The NON-STOP MUSIC RELAY function
plays music continuously without an interval
between tracks/files. If there were two mp3
files, it skips to the next file's 10 seconds from
the start position when the previous track
reaches its10 seconds before the end position.
Press the NON-STOP MUSIC RELAY button on
the product or NON-STOP RELAY button on
the remote control.
Each time you press this button, the mode
changes as follows:
NON-STOP RELAY ON ; NON-STOP RELAY
OFF
||NOTEs |
✎✎ This function is only available during
playback of a CD/USB.
✎✎ When DANCE TIME mode is swithed ON,
the B/T, TV SoundConnect, TUNER, and
AUX sources enter Mute mode. The music
that is currently playing is paused.
✎✎ When you turn off DANCE TIME, any CD
or USB whose playback had been paused
when you started DANCE TIME, resumes
from the beginning of the track that had
been playing.
✎✎ When playing a DANCE TIME sound file,
you can change the dance music by pressing
the 1, 2 button.
TEMPO Function
Use this to change the TEMPO while music is
playing.
1. During playback (CDDA/ MP3/ WMA),
press the TEMPO button on the remote
control.
2. Select the desired TEMPO by using the
EFFECT LEVEL button on the remote
control.
||NOTEs |
✎✎ TEMPO Function does not operate in the
Bluetooth, TV SoundConnect, FM and AUX
mode.
DANCE TIME Function
Press the DANCE TIME button on the remote
control when playing music to play the dance
music stored in the product.
Use this function to enjoy exciting music.
1. Press the DANCE TIME button on the
remote control.
Each time you press this button, the mode
changes as follows:
DANCE TIME ON ; DANCE TIME OFF
2. To cancel this function, press the DANCE
TIME button until "DANCE TIME OFF" is
displayed.
27
✎✎ When you turn TEMPO off, all TEMPO
settings are lost.
Booting Sound Function
When the Booting Sound Function is on, your
Hi-fi Component demonstrates it's audio
prowess as it boots up.
1. Press the product's GIGA SOUND BEAT
button or the remote control's GIGA
button for 5 seconds. The BOOTING
SOUND menu appears on the display
panel.
2. Press the product's GIGA SOUND BEAT
button or the remote control's GIGA
button for 5 seconds to turn the BOOTING
SOUND function On or Off.
English
03 Functions
Increases the left and right speaker's output
in turn and makes it seem as if the sound is
moving from side to side.
||NOTEs |
✎✎ When the DANCE TIME sound file finishes
playing, the DANCE TIME mode changes to
DANCE TIME OFF.
Appendix
Troubleshooting
Refer to the chart below when this product does not function properly. If the problem you are
experiencing is not listed below or if the instructions below do not help, turn off the product,
disconnect the power cord, and contact the nearest authorized dealer or Samsung Electronics
Service Center.
Symptom
Check/Remedy
I cannot eject the disc.
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
Playback does not start
immediately when the Play/Pause
button is pressed.
• Are you using a deformed disc or a disc with scratches on
the surface?
• Wipe the disc clean.
Sound is not produced.
• No sound is heard during fast playback, slow playback,
and step motion playback.
• Are the speakers connected properly? Is the speaker setup
correctly customized?
• Is the disc severely damaged?
The remote control does not work. • Is the remote control being operated within its
operational angle and distance range?
• Are the batteries drained?
The product is not working.
• Press the @ button (on front panel) for more than 5
(Example: The power goes out
seconds with no disc inside. The initialization message
or the front panel buttons don't
appears on the screen, and the power will turn off
work, or you hear a strange noise.)
automatically. When you turn your product on again, all
the settings will be reset.
The product is not working
Don't use this unless absolutely necessary.
normally.
Can't receive radio broadcast.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external
FM antenna in an area with good reception.
Turn off automatically after
displaying "PROTECT"
• Check the power in use is within the range of the power
which specified on the rear label of the product.
• If "Voltage Selector" is on the rear panel, check the power
is same with the voltage that you set manually.
28
English
Specifications
General
FM Tuner
CD Disc
Amplifier
Dimensions
Main unit
6.1 Kg
Speaker
55.17 Kg
Main unit
550 (W) x 212 (H) x 367 (D) mm
Speaker
648 (W) x 652 (H) x 440 (D) mm
Operating Temperature
Range
+5°C~+35°C
Operating Humidity Range
10 % to 75 %
Signal/Noise ratio
55 dB
Usable sensitivity
10 dB
Total harmonic distortion
1%
CD : 12 cm (COMPACT
DISC)
Reading Speed : 4.8 ~ 5.6 m/sec.
Front speaker output
575W/CH (4Ω)
Subwoofer output
575W/CH (4Ω)
Frequency range
22Hz~20KHz
S/N Ratio
65 dB
Channel separation
60 dB
Input sensitivity
AUX IN1 1.2V, AUX IN2 2.0V
Maximum Play Time : 74 min.
*: Nominal specification
-- Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
-- Weight and dimensions are approximate.
-- Design and specifications are subject to change without prior notice.
-- For information on the power supply and power consumption, refer to the label attached to the
product.
Open Source Announcement
To send inquiries and requests regarding open sources, contact Samsung via Email
(oss.request@samsung.com).
• Hereby, Samsung Electronics, declares that this equipment is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
The original Declaration of Conformity may be found at http://www.samsung.com,
go to Support > Search Product Support and enter the model name.
This equipment may be operated in all EU countries.
29
English
04 Appendix
Weight
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer
care centre.
Area
Contact Centre 
AUSTRIA
0800 - SAMSUNG (0800 - 7267864)
BELGIUM
02-201-24-18
BOSNIA
BULGARIA
CROATIA
CZECH
DENMARK
FINLAND
FRANCE
051 331 999
07001 33 11 , sharing cost
062 726 786
800 - SAMSUNG (800-726786)
70 70 19 70
030-6227 515
01 48 63 00 00
0180 6 SAMSUNG bzw.
0180 6 7267864*
(*0,20 €/Anruf aus dem dt. Festnetz,
aus dem Mobilfunk max. 0,60 €/Anruf)
8009 4000 only from landline, toll
free
80111-SAMSUNG (80111 726
7864) only from land line
(+30) 210 6897691 from mobile
and land line
0680SAMSUNG (0680-726-786)
0680PREMIUM (0680-773-648)
800-SAMSUNG (800.7267864)
261 03 710
020 405 888
GERMANY
CYPRUS
GREECE
HUNGARY
ITALIA
LUXEMBURG
MONTENEGRO
Web Site
www.samsung.com/at/support
www.samsung.com/be/
support (Dutch)
www.samsung.com/be_fr/
support (French)
www.samsung.com/support
www.samsung.com/bg/support
www.samsung.com/hr/support
www.samsung.com/cz/support
www.samsung.com/dk/support
www.samsung.com/fi/support
www.samsung.com/fr/support
www.samsung.com/de/
support
www.samsung.com/gr/
support
http://www.samsung.com/
hu/support
www.samsung.com/it/support
www.samsung.com/support
www.samsung.com/support
Area
SLOVENIA
NETHERLANDS
NORWAY
POLAND
PORTUGAL
ROMANIA
SERBIA
SLOVAKIA
SPAIN
SWEDEN
SWITZERLAND
U.K
EIRE
LITHUANIA
LATVIA
ESTONIA
Contact Centre 
080 697 267
090 726 786
0900-SAMSUNG (0900-7267864)
(€ 0,10/Min)
815 56480
0 801-172-678* lub +48 22 60793-33 **
*(całkowity koszt połączenia jak za 1
impuls według taryfy operatora)
** (koszt połączenia według taryfy
operatora)
808 20 7267
08008 SAMSUNG (08008 726 7864)
TOLL FREE No.
011 321 6899
0800 - SAMSUNG(0800-726 786)
0034902172678
0771 726 7864 (SAMSUNG)
Web Site
www.samsung.com/si/
support
www.samsung.com/nl/
support
www.samsung.com/no/support
www.samsung.com/pl/
support
www.samsung.com/pt/support
www.samsung.com/ro/support
www.samsung.com/rs/support
www.samsung.com/sk/support
www.samsung.com/es/support
www.samsung.com/se/support
www.samsung.com/ch/
support (German)
0848 726 78 64 (0848-SAMSUNG)
www.samsung.com/ch_fr/
support (French)
www.samsung.com/uk/support
0330 SAMSUNG (7267864)
0818 717100
www.samsung.com/ie/support
8-800-77777
www.samsung.com/lt/support
8000-7267
www.samsung.com/lv/support
800-7267
www.samsung.com/ee/support
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of
with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate
that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste and
recycle them through your local, free battery return system.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g.
charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these
items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
© 2014 Samsung Electronics Co., Ltd. All rights reserved.
AK68-02686M-03
AK68-02686M-03
AH68-02686M
Download PDF

advertising