Samsung | MAX-DN55 | Samsung MAX-DN55 Benutzerhandbuch

THREE-CD CHANGER
MINI-COMPACT SYSTEM
MAX-DN55
Instruction Manual
Safety Warnings
GB
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE REAR COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CLASS 1 LASER PRODUCT
This Compact Disc player is classified
as a CLASS 1 LASER product.
Use of controls, adjustments or performance of procedures other
than those specified herein may result in hazardous radiation
exposure.
CAUTION-INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM.
This symbol indicates that dangerous voltage which
can cause electric shock is present inside this unit.
This symbol alerts you to important operating and
maintenance instructions accompanying the unit.
WARNING: To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
Wiring the Main Power Supply Plug(UK Only)
IMPORTANT NOTICE
The main lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin
face of the plug and if it requires replacing, a fuse approved to BS1362 of the same rating must be used.
Never use the plug with the fuse cover removed. If the cover is detachable and a replacement is required, it must be of the same
colour as the fuse fitted in the plug. Replacement covers are available from your dealer.
If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you
should obtain a suitable safety approved extension lead or consult your dealer for assistance.
However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug. Do not connect the
plug to a main socket as there is a risk of shock hazard from the bared flexible cord.
Never attempt to insert bare wires directly into a main socket. A plug and fuse must be used at all times.
IMPORTANT
The wires in the main lead are coloured in accordance with the following code:–
BLUE = NEUTRAL
BROWN = LIVE
As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows:–
The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK.
The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.
WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH
THE LETTER E OR BY THE EARTH SYMBOL
, OR COLOURED GREEN OR GREEN
AND YELLOW.
2
Thank you for buying this
SAMSUNG mini-compact system.
Contents
Please take time to read these instructions.
They will allow you to operate your
system with ease and take full advantage
of its features.
SAFETY WARNINGS ................................................................................. 2
TUNER
INSTALLING YOUR MINI-COMPACT SYSTEM
Searching for and Storing the Radio Stations ....................................... 31
Front Panel View .................................................................................... 4
Selecting a Stored Station...................................................................... 32
Remote Control....................................................................................... 5
Improving Radio Reception .................................................................... 32
Rear Panel View..................................................................................... 6
About RDS broadcasting ........................................................................ 33
Where to Install Your Mini-Compact System .......................................... 7
About RDS DISPLAY function ............................................................... 33
Inserting Remote Control Batteries ........................................................ 7
PTY (Program Type) indication and PTY-SEARCH function.................. 34
Connecting your System to the Power Supply....................................... 7
Connecting the Loudspeakers................................................................ 8
Connecting the Center Speaker/ Surround Speaker.............................. 8
Connection of the TV monitor (optional) and VCR (optional)................. 9
Connection of the MD recorder (optional) .............................................. 9
TAPE DECK
Listening to a Cassette........................................................................... 35
CD Synchro Record Feature .................................................................. 35
Connecting the AM (MW)/LW Aerial ....................................................... 10
Recording a Compact Disc..................................................................... 36
Connecting the FM Aerial ....................................................................... 10
Recording a Radio Program................................................................... 36
Viewing the Various Functions on Your System ..................................... 11
Copying a Cassette (Dubbing) ............................................................... 37
Setting the Clock .................................................................................... 11
Selecting the Cassette Playback Mode (Deck 2 Only)........................... 37
DVD/VCD/CD-PLAYER
OTHER FUNCTIONS
Loading and Changing Compact Discs .................................................. 12
Timer Function........................................................................................ 38
Playing a Disc......................................................................................... 12
For the Protection of being Recorded .................................................... 38
Video Output Selection........................................................................... 12
Mute Function ......................................................................................... 39
Selecting a Disc in the CD changer ....................................................... 13
Selecting an Equalizer Preset ................................................................ 39
Searching & Skipping thourgh a Chapter or Track................................. 14
Power Sound Function ........................................................................... 39
Using the Display Function..................................................................... 14
Cancelling the Timer............................................................................... 39
Repeat Play ............................................................................................ 15
Setting the System to Switch off Automatically ...................................... 40
Program Playback in a specific Order.................................................... 16
Super Bass Sound.................................................................................. 40
Using the Disc View Function................................................................. 17
Connecting Headphones ........................................................................ 40
Selecting Audio ....................................................................................... 18
Connecting to an External Source.......................................................... 41
Selecting the Subtitle Language............................................................. 19
Selecting the Desired Screen Angle....................................................... 20
Using the zoom....................................................................................... 21
Using the Bookmark Function ................................................................ 21
Using the setup Menu............................................................................. 22
RECOMMENDATIONS
FOR
USE
Safety Precautions.................................................................................. 41
Cleaning Your Mini-Compact System ..................................................... 42
Setting up the language features ........................................................... 23
Precautions When Using Compact Discs............................................... 42
Setting up the parental level................................................................... 25
Precautions When Using Audio Cassettes............................................. 42
Setting up audio options......................................................................... 26
Disc type and characteristics.................................................................. 43
Setting up display options....................................................................... 28
Before Contacting the After-Sales Service ............................................. 44
Dolby Surround....................................................................................... 29
Technical Specifications.......................................................................... 45
Symbols
Press
Push
Important
Note
3
GB
Front Panel View
GB
2
1
Disc 1
33 32
Disc 2
Disc 3
Disc Change
Disc Selection / Direct Play
3
31
4
Volume
+
On/Standby
5
30
R
Demo
6
RDS
PTY
7
Timer
Display /Clock
—
DOLBY DIGITAL
TUNER
8
DVD/CD
TAPE
29
AUX
Memory
CD Synchro
Display
Deck 1/2
TAPE
Normal
REC/Pause
Phones
REC Lock
Down
Tuning Mode
d
TAPE REC
HI-Speed
D S P/E Q
9
REV. Mode
ter
En
Mono/ST
P/S
ou
n
Band
Up
S.
Ba
10
s
s
lby d
D o ro un
S ur
28
27
26
25
11
24
12
23
13
22
21
14
20
15
19
16
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
4
Disc Selection buttons
Compact Disc Compartment
Timer/Clock
Display (RDS)
On/Standby
Demo
PTY (RDS)
Memory
Mono/ST
Headphone Jack Connector
REC Lock
Cassette Deck 1
Rec/Pause
Display
CD Synchro
Fast Forward/Rewind
Tuning Mode or Stop button
17
18
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
CD Track or radio station search (Down/Up)
TAPE Normal Recording
TAPE Hi-Speed Recording
Rev. Mode
Deck 1/2
Cassette Deck 2
DSP/EQ
S.Bass
Dolby Surround
Multi Jog
Enter
Power Sound
Volume
Function Selection buttons
Open/Close
Disc Change
Remote Control
GB
On/Standby
1
1
2
3
2
4
5
6
3
7
8
9
Disc Skip
10/0
Clear
Open/Close
Mute
DSP/EQ
Dolby Surround
S.Bass
Power Sound
Program
Repeat
4
DVD/CD
5
DECK
Deck 1/2
38
37
36
35
34
33
32
31
30
29
Band
6
28
+
Volume
27
Tuning
Mode
7
26
8
9
10
11
12
13
14
15
16
17
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
Volume
—
25
Zoom
Timer On/Off
On/Standby
Numeric Buttons
Disc Number Skip
Two-Digit Track, Selection/+10 (Tuner)
DVD/CD Function Selection Buttons
Deck 1/2
Volume
Speaker Mode
Sound Edit
Timer On/Off
Sleep
Test Tone
DVD/CD Display
Setup
AUX
Title
Return
Enter (Up/Down, Left/Right)
Sub Title
Sleep
Speaker Mode
Test Tone
Sound Edit
Angle
Audio
Book Mark
Step
Display
Menu
Title
Set up
21
Enter
AUX
Return
24
23
22
Sub Title
20
19
18
20. Menu
21. Step
22. Book Mark
23. Audio
24. Zoom
25. Angle
26. Tuning Mode
27. Radio Station Search
28. Radio selection
29. Cassette Function Selection buttons
30. Clear
31. Program
32. Repeat
33. S. Bass
34. Power Sound
35. DSP/EQ
36. Dolby Surround
37. Sound Cut-Off Selection
38. Compact Disc Compartment Open/Close
5
Rear Panel View
GB
1
2
3
4
5
6
7
11 10
8
1. SUB WOOFER PRE OUT
7. LOUDSPEAKER CONNECTOR TERMINALS
2. FM AERIAL CONNECTOR TERMINAL
8. CENTER SPEAKER
3. AM AERIAL CONNECTOR TERMINAL
9. SURROUND SPEAKERS
4. DVD/CD DIGITAL OUT JACK
10. VIDEO OUT
5. LINE OUT
11. S-VIDEO OUT
6. AUX INPUT
6
9
Where to Install Your
Mini-Compact System
Inserting Remote Control Batteries
GB
To take full advantage of your new mini-compact system, follow these installation instructions before connecting the unit.
Install the system on a flat, stable surface.
Never place this unit on carpeting.
Never place this unit in an outdoor area.
Maintain an open space of approximately 4 inches (10 cm) on the
sides and rear of the system, for ventilation purposes.
Make sure that you have enough room to open the compact disc
compartment easily.
Place the loudspeakers at a reasonable distance on either side of
the system to ensure good stereo sound.
Direct the loudspeakers towards the listening area.
For optimum performance, make sure that both speakers are placed
at an equal distance above the floor.
Insert or replace remote control batteries when you:
Purchase the mini-compact system
Find that the remote control is no longer operating correctly
When replacing the batteries, use a new set of batteries and
never mix alkaline and manganese batteries.
1
2
3
Disc 1
Disc 2
Disc 3
Place your thumb on the position marked
on the battery compartment cover (rear of the remote control) and push the cover in the
direction of the arrow.
Insert two AAA, LR03 or equivalent batteries, taking care to respect
the polarities:
+ on the battery against + in the battery compartment.
– on the battery against – in the battery compartment.
Replace the cover by sliding it back until it clicks into position.
Disc Change
Disc Selection / Direct Play
Volume
+
On/Standby
R
Demo
RDS
PTY
Timer
/Clock
Display
–
DOLBY DIGITAL
TUNER
DVD/CD
TAPE
AUX
CD Synchro
Display
Deck 1/2
TAPE
REC Lock
Down
Tuning Mode
d
TAPE REC
HI-Speed
Normal
Up
D S P/E Q
Phones
REV. Mode
ter
En
Memory
REC/Pause
P/S
ou
n
Band
Mono/ST
S.
Ba
s
s
lby d
D o ro un
S ur
Connecting your System to the
Power Supply
The main lead must be plugged into an appropriate socket.
Before plugging your system into a main socket, you must check
the voltage.
1
Plug the main lead (marked AC Cord on the rear of the system) into
an appropriate socket.
2
Press the On/Standby button to switch your mini-compact system
on.
SPEAKER
(6Ω)
R
F
SP
7
Connecting the Loudspeakers
GB
The loudspeaker connector terminals are located on the rear of the system.
There are four terminals on the system:
Two for the left speaker (marked L)
Two for the right speaker (marked R)
To achieve the correct sound quality, connect
the:
Red wire to the + terminals
Black wire to the – terminals
1
To connect a wire to a terminal, push the tab as far
as it will go:
To the right on the system
2
Insert the wire, up to the plastic sheathing, in the
hole.
3
Push the tab back:
To the left on the system, until it clicks into place
To the top on the loudspeaker
Result: The wire is pinched and held firmly in place.
4
Repeat the operation for each wire.
Connecting the Center Speaker/ Surround Speaker
CENTER SPEAKER
(+)
Connect the CENTER SPEAKER.
Connect the center speaker cord to the CENTER
SPEAKER terminal.
(–)
CENTER SPEAKER
(6Ω)
L
SURROUND
SPEAKER
(6Ω)
SUB
WOOFER
PRE OUT
FM 75Ω
R
AM ANT.
DIGITAL OUT
OPTICAL
S-VIDEO
OUT
VIDEO
OUT
LINE OUT
CENTER SPEAKER
(6Ω)
AUX IN
L
SURROUND
SPEAKER
(6Ω)
R
(+)
(–)
SURROUND SPEAKER
(right)
8
FRONT
SPEAKERS
(6Ω)
(+)
(–)
SURROUND SPEAKER
(left)
Connect the SURROUND SPEAKERS.
There is no difference between the surround
speakers. Both speakers can be connected as R
(right) or L (left).
Connect the surround speaker cords to the SURROUND SPEAKERS terminals.
Connection of the TV monitor (optional) and VCR (optional)
GB
The following show examples of connections commonly used to connect the MAX-DN55 player with a External Source.
(Example : TV, VCR, DAT CD-RW, etc)
When S-VIDEO is connected, S-VIDEO has priority.
Connection of the MD recorder (optional)
Refer to page 41 to give a full detail of the peripheral connection
methods
DVD/CD Digital Out Jack
This unit can output DVD/CD digital sound signals through this
jack. Use an optical cable to connect digital audio equipment. (DAT
deck, MD recorder, etc.).
Remove the dust cap (1) from the DVD/CD DIGITAL OUT jack. Then,
connect an optical cable plug to the DVD/CD DIGITAL OUT jack.
When the DVD/CD DIGITAL OUT jack is not being used
Attach the supplied dust cap.
9
Connecting the AM (MW)/LW Aerial
GB
The AM aerial (for long and medium waves) can be:
Placed on a stable surface
Fixed to the wall (you must first remove the base)
The AM aerial connector terminals are located on the rear of the system and are
marked AM .
To avoid noise interference, check that the loudspeaker wires do not run
close to the aerial wires.
Always keep them at least 2 inches (5 cm) away.
Connecting the FM Aerial
How to connect a COAXIAL TYPE aerial.
Connect a 75Ω antenna to the FM antenna terminal.
Plug the connector on the FM aerial supplied into the coaxial socket (75Ω) marked FM on the rear of the system.
Follow the instructions given on Page 31 to tune into a radio station, and determine the best position for the aerial.
If reception is poor, you may need to install an outdoor aerial.
To do so, connect an outdoor FM aerial to the FM socket on the rear of the system using a 75Ω coaxial cable (not supplied).
10
Viewing the Various Functions on
Your System
Setting the Clock
GB
You can view the various functions available on your system.
Press the Demo button.
Result: The various functions available are listed in turn on the display.
All these functions are described in detail in this booklet.
For instructions on how to use them, refer to the appropriate
sections.
2
Remember to reset the clock when the time changes from
regular to daylight savings and vice verse.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
To cancel this function, press Demo again.
1
2
3
On/Standby
Switch the system on by pressing On/Standby.
Press Timer/Clock twice.
Result: CLOCK is displayed.
Press Enter.
Result: The hour flashes.
R
4
Demo
RDS
PTY
Display
Timer
/Clock
5
DOLBY DIGITAL
TUNER
DVD/CD
TAPE
6
7
To...
Turn the Multi Jog knob to the...
Increase the hours
Decrease the hours
Right
Left
When the correct hour is displayed, press Enter.
Result: The minutes flash.
To...
Turn the Multi Jog knob to the...
Increase the minutes
Decrease the minutes
Right
Left
When the correct time is displayed, press Enter.
Result: The clock starts and is displayed, even when the system is in
standby mode.
You can display the time, even when you are using another function, by pressing Timer/Clock once.
Volume
+
On/Standby
R
Demo
1
RDS
PTY
Timer
/Clock
Display
–
DOLBY DIGITAL
2
TUNER
DVD/CD
TAPE
AUX
Band
Memory
CD Synchro
Display
Deck 1/2
TAPE
TAPE REC
HI-Speed
Normal
Down
Tuning Mode
3,5,7
Up
D S P/E Q
REC/Pause
REC Lock
REV. Mode
4,6
d
ter
En
Mono/ST
P/S
ou
n
1
Your system is equipped with a clock which allows you to
turn your system on and off automatically. You should set the
clock:
When you first purchase the mini-compact system
After a power failure
After unplugging the unit
S.
Ba
s
s
lby d
D o ro un
S ur
11
Loading and Changing Compact
Discs
Playing a Disc
GB
Playback
The CD disc changer can contain up to three 12 cm or 8 cm
compact discs without using an adapter.
Never force the compact disc carrousel when opening and closing the compartment.
Never press down or place objects on the carrousel.
Always treat your compact discs with care; refer, if necessary, to
the section entitled “Precautions When Using Compact Discs” on
page 42.
1
2
1
2
3
Press the Open/Close(
) button.
Place a disc gently into the tray with the disc's label facing up.
Press the Play/Pause button or Open/Close(
disc tray.
) button to close the
Switch the system on by pressing On/Standby.
Disc 1
Press the Open/Close( ) button on the front panel.
Result: The compartment opens.
3
Disc 2
Disc 3
Disc Change
Disc Selection / Direct Play
1,3
Place one or two discs in the front slots of the carrousel, with the
label on the discs facing upwards.
Check that the compact disc has been correctly inserted in
the holder before closing the compartment.
Volume
+
On/Standby
R
4
Demo
If you wish to load a third compact disc, press the Disc Change button on the front panel (or Disc Skip on the remote control).
Result: The carrousel rotates by 120°.
RDS
PTY
Timer
/Clock
Display
3
–
DOLBY DIGITAL
Close the compartment by pressing the Open/Close( ) button
again.
If you wish to start playing a disc directly, you can also
proceed as follows.
DVD/CD
TAPE
AUX
Band
Memory
CD Synchro
Display
Deck 1/2
TAPE
REC Lock
s
REV. Mode
Down
Tuning Mode
d
TAPE REC
HI-Speed
Normal
Up
D S P/E Q
REC/Pause
ter
En
Mono/ST
P/S
ou
n
5
TUNER
To play...
Press...
Disc 1
DVD/CD (
) or DISC 1
Disc 2
DISC 2
Disc 3
DISC 3
Result: The compartment closes automatically and the disc selected
starts playing.
6
Video Output Selection
To change or unload the compact disc changer, repeat Steps 2 to 5.
Keep the compartment closed whenever you are not using
it, to prevent dust from entering.
Press the Dolby Surround button in POWER OFF, then it is converted to
“
You can load or unload compact discs when the radio,
tape or auxiliary source function is selected.
NTSC
PAL
SECAM
” and select the TYPE you want.
Example : Select PAL, if TV is for PAL.
When disk is set to NTSC in PAL, it doesn't operate.
Disc 1
Disc 2
Disc 3
Disc Change
Disc Selection / Direct Play
5
4
2,5
Volume
+
On/Standby
R
Volume
Demo
+
On/Standby
RDS
PTY
R
–
DOLBY DIGITAL
1
TUNER
RDS
PTY
Timer
/Clock
Display
Timer
/Clock
Display
DVD/CD
TAPE
Band
–
Mono/ST
Memory
CD Synchro
Display
Deck 1/2
TAPE
TAPE
AUX
REC/Pause
Band
Display
Deck 1/2
HI-Speed
D
12
REV. Mode
TAPE REC
Up
s
s
TAPE
Normal
Tuning Mode
Ba
CD Synchro
HI-Speed
Normal
Down
S.
Memory
REC/Pause
REC Lock
d
d
ter
En
Mono/ST
P/S
ou
n
s
REV. Mode
TAPE REC
D S P/E Q
DVD/CD
ter
En
5
DOLBY DIGITAL
TUNER
AUX
P/S
ou
n
Demo
lby d
D o ro un
S ur
Playing a Disc (Cont'd)
Selecting a Disc in the Disc changer
GB
Several options are available during DVD playback.
1
Stopping Playback
To select a specific disc, press the corresponding Disc (1, 2, 3) button
on the front panel or Disc Skip on the remote control, until the
required disc indicator flashes.
Result: All the discs will be played in turn, starting with the one selected.
Press the Stop button in playback.
2
Removing Disc
Press the Open/Close (
3
)button
Pausing Playback
Press the Play/Pause or Step button on the remote during
playback.
– Screen stops, no sound.
– To resume again, press Play/Pause button once again.
4
If you use the Disc (1, 2, 3) function when listening to the
radio or to a tape, the system switches automatically to the
DVD/CD mode.
If the disc selected is not loaded, the next disc is played automatically.
Step Motion Playback (Except CD)
Press the Step button on the remote during playback.
– Each time the button is pressed, a new frame will appear.
– No sound is heard during STEP mode.
– Press Play/Pause to resume normal playback.
(You can only perform step motion playback in the forward direction.)
5
The function is automatically selected when DISC SKIP is
pushed.
Disc 1
Disc 2
Disc 3
Slow Motion Playback (Except CD)
) or REV SEARCH (
) button on the
Press the FWD (
remote during PAUSE or STEP mode.
– By pressing or shuttling, you can select slow motion playback for
1/2, 1/4 or 1/8 of normal speed.
– No sound is heard during slow mode.
– Press Play/Pause to resume normal playback.
– When playing a VCD, the reverse slow motion playback will not work.
Mute
Open/Close
1
2
3
4
5
6
7
8
9
Disc Skip
10/0
Clear
2 DSP/EQ
Volume
+
When playing DVD, if an Audio that recorded in a disc is
AC-3 (Bitstream)
Dolby Surround
S.Bass
Power Sound
Program
Repeat
Making a sound with only Dolby Digital, the DOLBY DIGITAL LED at
the bottom of the display panel turns on red light.
DOLBY SURROUND, DSP/EQ, POWER SOUND and S.BASS functions
can not be operated.
3,4,5
1
5
Disc Cha
Disc Selection / Direct Play
DVD/CD
DECK
Deck 1/2
Band
Zoom
Timer On/Off
Sleep
Speaker Mode
Test Tone
Sound Edit
Angle
Audio
3,4,5
Book Mark
Step
Display
Title
Menu
Set up
RESUME function
When you stop disc play, the player remembers where you stopped,
so when you press Play again, it will pick up where you left off
(unless the disc is removed, the Stop button is pressed twice or the
player is unplugged.).
If the player is left for 5 minutes in pause mode, it will stop.
If the player is left in the stop mode for more than one minute
without any user interaction, a screensaver will be activated, and
the TV screen will fade in and fade out repeatedly. Press Play button to resume normal play.
13
Searching & Skipping through a
Chapter or Track
Using the Display Function
GB
During playback, you can search quickly through a chapter or
track or use the skip function to jump to the next selection.
Searching through a Chapter or Track
1
If you want to display the title, chapter, time, audio and subtitle information on a DVD, press the DISPLAY button. If you
want to display the track and time information on a VCD or
CD, press the Display button.
When Playing a DVD
Press the REV (
) or FWD SEARCH (
remote during PLAY mode.
) button on the
) or FWD SEARCH (
) button on the
Press the REV (
remote and press again to search at a faster
speed(2X/8X/16X/32X/normal speed, in order)on DVD.
) or FWD SEARCH (
) button on the
Press the REV (
remote and press again to search at a faster speed(4X/8Xnormal
speed in order) on VCD and CD.
To return to normal speed playback, press the Play/Pause button.
1
During playback, press the Display button on the remote.
– Current title, chapter number and elapsed time will be displayed.
Title number
display
T:
Chapter number
display
Time display
01
C:
04
TIME 0:06 : 54
ENTER
Skipping Tracks (It may use the SKIP function in MULTIJOG)
2
Press the NEXT SKIP (
) or BACK SKIP (
) button during playback.
When playing a DVD, if you press the NEXT SKIP (
) button, it moves to next chapter. If you press the BACK SKIP (
) button, it moves to the beginning of the chapter. One more press
makes it move to the beginning of the previous chapter.
When playing a VCD 2.0 in MENU OFF mode, a VCD 1.1 or a
CD, if you press NEXT SKIP (
) button, it moves to next
track. If you press BACK SKIP (
) button, it moves to the the
beginning of the track. One more press makes it move to the
beginning of the previous track.
If a track exceeds 15 minutes when playing a VCD and you press
NEXT SKIP (
) button, it moves forward 5 minutes. If you
press BACK SKIP (
) button, it moves backward 5 minutes.
When playing a VCD 2.0 in the MENU MODE or Track View function, if you press NEXT SKIP (
) button, it move to the next
MENU or the next Track View display. If you press BACK SKIP
(
) button, it moves to the previous MENU or the previous
Track View display. (Refer to page 16.)
Use the LEFT/RIGHT ( / ) button to select a title or a chapter
number.
Use the UP/DOWN ( / ) button or Number buttons to enter a
different title or chapter number, then press the Enter button.
To enter the time from which you want to start, use the
LEFT/RIGHT ( / ) button to select, then use the Number buttons to enter the time.
Then press the Enter button.
2
Press the Display button on the remote twice.
AUDIO : ENG DOLBY DIGITAL 5.1CH
SUBTITLE : ENG ON
While in search (8X/16X/32X)on DVD or high-speed playback on
VCD, no sound will be heard.
Though 2X SCAN AUDIO in ON in SETUP MENU, no sound will
be heard on discs which are recorded with LPCM or DTS.
– Current audio and subtitle information will appear.
– To make the screen disappear, press the Display button again.
Depending on the disc, audio may or may not be heard when a
disc is in 2X playback mode.
What is a Chapter?
Each Title on a DVD can be divided into chapters (similar to tracks
on an audio CD).
7
8
9
Disc Skip
10/0
Clear
S.Bass
Power Sound
Program
Repeat
What is a Title?
A DVD may contain several different titles. : for example, if a disc
contains four different movies, each might be considered a title.
2
Volume
—
DVD/CD
DECK
Sleep
Deck 1/2
1
Band
Zoom
Timer On/Off
Speaker Mode
Angle
Test Tone
1,2Sound Edit
+
Display
Volume
Set up
Step
Audio
1 Book Mark
Menu
Title
Enter
AUX
14
Return
Sub Title
Using the Display Function
(Cont’d)
Repeat Play
GB
When Playing CD/VCD
1
Repeat play allows you to repeat a track, title, or the entire
disc.
During playback, press the Display button on the remote.
When playing a DVD
Current track number and elapsed time will be displayed.
1
2
Track number
display
Time display
T:
01
TIME 0:12 : 43
Press the Repeat button once to display the current status.
Press the Repeat button twice to repeat the chapter currently playing.
ENTER
REPEAT : CHAPTER
Use the LEFT/RIGHT ( / ) button to select a track. Use the
UP/DOWN ( / ) button or Number buttons to enter a different
track number, then press the Enter button.
2
3
Press the Repeat button a third time to repeat the title currently playing.
REPEAT : TITLE
To enter the time from which you want to start, use the
LEFT/RIGHT ( / ) button to select, then use the Number buttons to enter the time.
Then press the Enter button.
Press the Display button on the remote twice.
T:02 0:00:03
T:05 1:07:47 REMAIN
4
Press the Repeat button again to turn off the repeat feature.
REPEAT : OFF
Elapsed time and remain time will appear.
To make the screen disappear, press the Display button again.
DVD repeats playback by chapter or title, CD and VCD repeat playback by disc or track.
Volume
—
Zoom
Timer On/Off
Sleep
Speaker Mode
Test Tone
Sound Edit
1,2
Angle
Step
Audio
1
Book Mark
Depending on the disc, the Repeat function may not work.
When in VCD 2.0 mode (MENU ON mode), this function does not
work.
Display
Menu
Title
Open/Close
Set up
Enter
AUX
Return
1
2
3
4
5
6
7
8
9
Disc Skip
10/0
Clear
Mute
Sub Title
DSP/EQ Dolby Surround
S.Bass
Power Sound
Program
Repeat
1,2,3,4
DVD/CD
DECK
15
Program Playback in a specific
Order
Repeat Play (Cont’d)
GB
When playing a CD/VCD
1
2
Press the Repeat button once to display the current status.
Program playback lets you set up a specific order for playback of titles, chapters or tracks on a disc only. This function
works in stop mode only.
If the microphone is connected in the middle of programming,
it may not operate normally.
Press the Repeat button twice to repeat the current track.
Program DVD
REPEAT : TRACK
Example: To program chapters 5 and 7 in order.
3
Press the Repeat button a third time to repeat all tracks.
1
2
In stop mode, press the Program button.
3
Use the LEFT/RIGHT ( / ) or UP/DOWN ( / ) button to
select 05 and press Enter. Then select 07 and press Enter button.
REPEAT : ALL
Use the LEFT/RIGHT (
Press the Enter button.
/
) button to select CHAPTER.
TRACK
01 02
05 06
09 10
13 14
PROGRAM ORDER
03
07
11
15
05 07
-------
04
08
12
16
-----
-----
CLEAR LAST TRACK
CLEAR ALL TRACKS
PRESS PLAY TO START
RETURN
4
Press the Repeat button again to turn off the repeat feature.
4
ENTER
Press the Play/Pause button. The disc will be played back in programmed order.
REPEAT : OFF
Press Clear button to resume normal Playback.
Disc Skip
10/0
Clear
Program
Repeat
1
4
DVD/CD
DECK
Open/Close
1
2
3
4
5
6
Mute
DSP/EQ Dolby Surround
7
8
9
Disc Skip
10/0
Clear
Zoom
Timer On/Off
Sleep
Speaker Mode
Test Tone
Sound Edit
Angle
Audio
2,3Book Mark
Step
S.Bass
Power Sound
Program
Repeat
1,2,3,4
Display
Menu
Title
Set up
Enter
AUX
Return
Sub Title
DVD/CD
DECK
Deck 1/2
Band
When you make a wrong selection during programming
Use the UP/DOWN ( /
CHAPTER, or TITLE).
) button to select CLEAR LAST TRACK (or
Press the Enter button to delete the last track (or chapter, or title) in the
program order.
When you want to delete the entire program
Use the UP/DOWN ( /
CHAPTERS, or TITLES).
) button to select CLEAR ALL TRACKS (or
Press the Enter button to delete all tracks, chapters or titles in the program order. All programmed tracks, chapters or titles are also deleted
when the disc is removed or the DVD player is turned off.
Depending on the disc, the Program Playback function may not work.
16
Program Playback in a specific
Order (Cont’d)
Using the Disc View Function
GB
Program VCD or CD
The desired music or video display can be accessed directly
without using the menu function.
Example: To program tracks 3 and 8 in order.
1
2
3
Track View (VCD)
In stop mode, press the Program button.
Use the LEFT/RIGHT (
Press the Enter button.
/
) button to select Program.
Use the LEFT/RIGHT ( / ) or UP/DOWN (
select 03 and press Enter.
Then select 08 and press the Enter button.
TRACK
01 02
05 06
09 10
13 14
/
) button to
Displays the beginning view of each track and the track number
1
DISC VIEW
PROGRAM ORDER
03
07
11
15
03 08
-------
04
08
12
16
Press the Title button in playback
Press the UP/DOWN ( / ) button to select TRACK VIEW.
-----
ENTER
1 TRACK VIEW
2 INDEX VIEW
-----
CLEAR LAST TRACK
CLEAR ALL TRACKS
PRESS PLAY TO START
RETURN
4
ENTER
Press the Play/Pause button. The disc will be played back in programmed order.
2
3
Press the Enter button.
Select the desired view by pressing the UP/DOWN (
LEFT/RIGHT ( / ) buttons.
/
) or
Press Clear button to resume normal Playback.
TRACK VIEW
7
8
9
Disc Skip
10/0
Clear
1
Program
Repeat
4
01
02
03
04
05
06
07
08
09
DVD/CD
DECK
Sleep
Speaker Mode
Test Tone
Sound Edit
Angle
(An example of a Track View)
Audio
4
Book Mark
Step
2,3
Press the Enter button.
Display
Menu
Title
Set up
Enter
Return
AUX
Sub Title
Tuning
Mode
Volume
—
To start RANDOM playback.
Zoom
Timer On/Off
1
2
Press the Program button while in stop mode.
Sleep
Test Tone
Use the LEFT/RIGHT (
the Enter button.
/
) button to select RANDOM and press
Display
Angle
Speaker Mode
Book Mark
Sound Edit
1
Audio
Step
Title
2
Menu
Set up
3
Press Play/Pause button.
– The disc will be played back in random order.
Enter
AUX
Return
Sub Title
3,4,
The function of RANDOM is operated in only VCD/CD.
Press Clear button to resume normal Playback.
S.Bass
7
8
9
Disc Skip
10/0
Clear
1
Program
Power Sound
Repeat
4
DVD/CD
DECK
Deck 1/2
Band
17
Using the Disc View Function
(Cont’d)
Selecting Audio
GB
Index View (VCD)
Displays the beginning view of each track and the track number
You can select a desired language quickly and easily with the
Audio button. If a menu is encoded on the disc, you can also
select by using the Menu button.
Using the Audio Button
1
2
3
Press the Title button in playback.
Press UP/DOWN (
Enter button.
/
) button to select INDEX VIEW. Press the
Select the desired view by pressing UP/DOWN (
LEFT/RIGHT ( / ) buttons.
/
1
2
Press the Audio button.
Use the UP/DOWN (
a DVD.
/
) button to select the desired language on
) or
AUDIO :
ENG
DOLBY DIGITAL 5.1CH
INDEX VIEW
01
02
03
04
05
06
07
08
09
- The audio and subtitle languages are represented by abbreviations.
4
3
Press the Enter button.
—
AUDIO :
STEREO
Zoom
Timer On/Off
Sleep
Speaker Mode
Test Tone
Sound Edit
Display
Use the UP/DOWN ( / ) button to select STEREO, R CHANNEL
or L CHANNEL on a VCD/CD.
1
Angle
Audio
Book Mark
Step
Title
2
Menu
Set up
Enter
AUX
Return
Sub Title
3,4,
Even when the microphone has been connected, press the audio
button and the UP/DOWN ( / ) button to select a wanted action.
Zoom
Timer On/Off
When you press Title button during DVD playback
Sleep
Speaker Mode
Test Tone
Sound Edit
Angle
Audio
1
Book Mark
Step
The disc's TITLE MENU function will come up. A disc must have at least
two titles for the TITLE MENU function to work.
Display
Title
2,3
Menu
Set up
Enter
AUX
Return
Sub Title
When you press Title button during CD playback
The unit enters the INTRO SCAN mode. INTRO SCAN lets you listen to
the beginning of each track for about 10 seconds.
When in VCD 1.1 & 2.0 mode (MENU OFF mode), this function
works.
In stop mode on VCD, press the TITLE button and the TRACK
VIEW will be displayed directly.
18
How to have the same audio language come up
whenever you play back a DVD.
Refer to "Setting Up the Language Features" on page 23.
This function depends on what languages are encoded
on the disc and may not work with all DVDs.
A DVD disc can contain up to 8 audio languages.
Selecting Audio (Cont’d)
Selecting the Subtitle Language
GB
Using the MENU Button
When a DVD is recorded with subtitles, you can use the
Subtitle feature to view the subtitles on-screen.
If a menu is encoded on the disc, you can also select by using
the MENU button.
When playing a DVD
1
2
Press the Menu button.
Use the UP/DOWN (
Using the Sub Title button
/
) button to select AUDIO information.
1
2
3
AUDIO
4
SUBTITLE
Press the Sub Title button.
Use the UP/DOWN (
guage.
SUBTITLE :
/
) button to select the desired subtitle lan-
ENG
OFF
(An example of a disc menu)
3
4
Press the Enter button.
Use the UP/DOWN (
/
) button to select 'ENGLISH'.
3
Use the LEFT/RIGHT ( / ) button to determine whether or not
the subtitle will be displayed.
SUBTITLE :
1
ENGLISH
2
FRANCAIS
ENG
ON
(An example of a disc menu)
5
Press the Enter button.
– Initially the subtitling will not appear on screen.
– The audio and subtitle languages are represented by abbreviations.
When playing a VCD
In disc version 2.0, the Menu button works as a conversion switch between
MENU ON and MENU OFF mode.
When playing a VCD 1.1 or CD the Menu button will not work.
Volume
—
Zoom
Timer On/Off
Volume
—
Timer On/Off
Sleep
Speaker Mode
Angle
Sleep
Speaker Mode
Test Tone
Sound Edit
Angle
Audio
Book Mark
Step
Zoom
Display
Audio
Set up
Title
2,3
Menu
Enter
Test Tone
Book Mark
Sound Edit
Step
Display
Title
2,3,4,5
AUX
Return
Sub Title
1
Menu
Set up
1
Enter
AUX
Return
Sub Title
How to have the same subtitle language come up
whenever you play back a DVD.
Refer to "Setting Up the Language Features" on page 23.
This function depends on what languages are encoded
on the disc and may not work with all DVDs.
A DVD disc can contain up to 32 subtitle languages.
19
Selecting the Subtitle Language
(Cont’d)
Selecting the Desired Screen
Angle
GB
Using the Menu button
1
2
When a DVD contains multiple angles of a particular scene,
you can select the Angle function.
Press the Menu button.
Use the UP/DOWN (
Using the Angle button
/
) button to select SUBTITLE information
Check to see if an 'ANGLE(
hand corner of the screen.
1
3
AUDIO
4
SUBTITLE
)’ mark is present at the upper right
When an 'ANGLE' mark is shown, press the Angle button.
ANGLE :
1/6
MARK :
ON
(An example of a disc menu)
3
4
Press the Enter button.
Use the UP/DOWN (
/
(An example of Angle information display)
) button to select the desired language.
2
1
ENGLISH
2
FRANCAIS
Use the UP/DOWN ( / ) button to select the desired screen
angle.
Then press the Enter button.
ANGLE :
5/6
MARK :
ON
(An example of a disc menu)
5
Press the Enter button.
(An example of Angle information display)
When playing a VCD
In disc version 2.0, the Menu button works as a conversion switch between
MENU ON and MENU OFF mode.
When playing a VCD 1.1 or CD, the Menu button will not work.
3
Use the LEFT/RIGHT ( / ) button to determine whether or not
the 'ANGLE' mark will be displayed.
ANGLE :
5/6
MARK :
OFF
Volume
—
Zoom
Timer On/Off
Sleep
Test Tone
Display
Speaker Mode
Angle
Book Mark
Sound Edit
2,3,4,5
Audio
1
Step
Menu
Title
Set up
Enter
AUX
Return
Sub Title
This function is disc-dependent, and may not work with all DVDs.
This function does not work when a DVD has not been recorded
with a multi-camera angle system.
Zoom
Timer On/Off
Sleep
Speaker Mode
Test Tone
Sound Edit
Display
2,3
1
Angle
Audio
Book Mark
Step
Menu
Title
Set up
Enter
AUX
20
Return
Sub Title
Using the zoom
Using the Bookmark Function
GB
Using the Zoom Function (DVD/VCD)
1
2
3
The Bookmark function lets you select parts of a DVD or VCD
(MENU OFF mode) so that you can quickly find the section at
a later time.
During playback or pause mode, press the Zoom button on the
remote. The square shadow will be displayed on screen.
Use the UP/DOWN ( / ) or LEFT/RIGHT ( /
select the part of the screen you want to zoom.
Using the Bookmark Function (DVD/VCD)
) button to
1
Press the Enter button.
During playback, press the Book Mark button on the remote.
Then 'MARKER' will be displayed.
MARKER :
During DVD playback, press Enter to zoom in 2X/4X/normal in order.
MARK
ENTER
During VCD playback, press Enter to zoom in 2X/normal in order.
Volume
—
Zoom
Timer On/Off
Sleep
Speaker Mode
Test Tone
Sound Edit
Angle
Audio
1Book Mark
2
Use the LEFT/RIGHT (
mark icon.
3
When you reach the scene you want to mark, press the Enter button.
The icon will change to a number (1, 2, or 3).
4
Press the Book Mark button to turn off the display.
Step
Display
2,3
Menu
Title
Set up
Enter
AUX
Return
/
) button to move to the desired book-
Sub Title
Deck 1/2
Band
+
Volume
Tuning
Mode
Volume
—
Zoom
Timer On/Off
Sleep
Speaker Mode
Test Tone
Sound Edit
Angle
Audio
1,4Book Mark
Step
Display
2,3
Menu
Title
Set up
Enter
AUX
Return
Sub Title
21
Using the Bookmark Function
(Cont’d)
Using the setup Menu
GB
Recalling a Marked Scene
1
During playback, press the Book Mark button on the remote.
2
3
Use the LEFT/RIGHT (
/
) button to select a marked scene.
The Setup menu lets you customize your MAX-DN55 player by
allowing you to select various language preferences, set up a
parental level, even adjust the player to the type of television
screen you have (i.e. widescreen).
1
Press the Setup button on the remote in stop mode.
Press the Play/Pause button to skip to the marked scene.
SETUP MENU
DVD/CD
DECK
3
Deck 1/2
1 PLAYER MENU
ENGLISH
2 DISC MENU
3 AUDIO
4 SUBTITLE
5 PARENTAL
6 AUDIO OPTIONS
7 DISPLAY OPTIONS
ENGLISH
ENGLISH
ENGLISH
UNLOCKED
RETURN
ENTER
Band
+
Volume
• PLAYER MENU : Setup of the Display Language (See P23)
Use the Player preference menu to select the language for the player's
on-screen displays.
Tuning
Mode
• DISC MENU : Setup of the Menu Language (See P23)
Use the Menu preference menu to select the language you want a DVD's
disc menu to be displayed in.
• AUDIO : Setup of the Audio Language (See P24)
Use the Audio preference menu to select the soundtrack language.
Volume
—
• SUBTITLE : Setup of the Subtitle Language (See P24)
Use the Subtitle preference menu to select the language the disc’s subtitles are to be displayed in.
Zoom
Timer On/Off
Sleep
Speaker Mode
Test Tone
Sound Edit
Angle
Audio
1Book Mark
• PARENTAL : Setup of the Parental Level (See P25)
Allows users to set the level necessary to prevent children from viewing
unsuitable movies such as those with violence, adult subject matter, etc.
Step
Display
2
Title
Menu
• AUDIO OPTIONS : Setup of the Audio Options (See P26)
Use to set up the audio options such as digital out setup.
Set up
Enter
Return
AUX
Sub Title
• DISPLAY OPTIONS : Setup of the Display Options (See P28)
Use to select which type of screen you want to watch and several display
options.
Clearing a Bookmark
1
2
2
Use the UP/DOWN (
ferent features.
3
Press the Enter button to access the sub features.
To make the setup screen disappear after setting up, press Setup
button again.
During playback, press the Book Mark button on the remote
Use the LEFT/RIGHT (
you want to delete.
3
/
) button to select the bookmark number
Press the Clear button to delete a bookmark number.
Press the Book Mark button to turn off display.
/
) button on the remote to access the dif-
Depending on the disc, some SETUP menu selections may not
work.
—
Up to three scenes may be marked at the same time.
When in VCD 2.0 mode (menu on mode), this function does not work.
Depending on the disc, the Bookmark function may not work.
Open/Close
2
3
4
5
6
7
8
9
Mute
S.Bass
Disc Skip
Clear
1
Zoom
Timer On/Off
Power Sound
Sleep
Speaker Mode
Test Tone
Sound Edit
Title
Program
Repeat
DVD/C
Angle
Audio
1,3Book Mark
Step
Display
2
Menu
Set up
Enter
AUX
22
Speaker Mode
Test Tone
Sound Edit
Angle
Audio
Display
Book Mark
Title
2,3
Menu
Set up
Enter
DSP/EQ Dolby Surround
3
10/0
Sleep
Step
—
1
Zoom
Timer On/Off
Return
Sub Title
AUX
Return
Sub Title
Setting up the language features
Setting up the language features
GB
If you set the player menu, disc menu, audio and subtitle language in advance, it will come up automatically every time
you watch a movie.
Using the Player Menu
Using the Disc Menu Language
This function changes the language only for the text on the disc menu
screens.
Example: Setting up in ENGLISH
Example: Setting up in ENGLISH.
1
1
Press the Setup button when in stop mode.
SETUP MENU
SETUP MENU
1 PLAYER MENU
ENGLISH
2 DISC MENU
3 AUDIO
4 SUBTITLE
5 PARENTAL
6 AUDIO OPTIONS
7 DISPLAY OPTIONS
ENGLISH
ENGLISH
ENGLISH
UNLOCKED
1 PLAYER MENU
ENGLISH
2 DISC MENU
3 AUDIO
4 SUBTITLE
5 PARENTAL
6 AUDIO OPTIONS
7 DISPLAY OPTIONS
ENGLISH
ENGLISH
ENGLISH
UNLOCKED
RETURN
RETURN
2
3
4
Press the Setup button when in stop mode.
Use the UP/DOWN (
/
) button to select the PLAYER MENU.
Press the Enter button.
Use the UP/DOWN (
/
2
3
4
Use the UP/DOWN (
Use the UP/DOWN (
) button to select 'ENGLISH'.
1
ENGLISH
2
3
4
5
6
FRANCAIS
DEUTSCH
ESPAÑOL
ITALIANO
NEDERLANDS
RETURN
/
) button to select DISC MENU.
/
) button to select ' ENGLISH'.
Press the Enter button.
DISC MENU LANGUAGE
PLAYER MENU LANGUAGE
5
ENTER
ENTER
1
ENGLISH
2
3
4
5
6
7
FRANCAIS
DEUTSCH
ESPAÑOL
ITALIANO
NEDERLANDS
OTHERS
RETURN
ENTER
Press the Enter button.
Select "OTHERS" if the language you want is not listed.
5
ENGLISH is selected and the screen returns to SETUP MENU.
ENTER
Press the Enter button.
ENGLISH is selected and the screen returns to SETUP MENU.
To make the SETUP MENU disappear, press the Return button.
Tuning
Mode
Mode
Volume
—
Volume
—
Zoom
Timer On/Off
Zoom
Timer On/Off
Sleep
Speaker Mode
Test Tone
Sound Edit
Angle
1 Display 2,3,4,5
Title
Set up
Test Tone
Sound Edit
Angle
Audio
Audio
Book Mark
Step
1
Menu
Display
2,3,4,5
Title
Menu
Set up
Enter
AUX
Enter
Return
Speaker Mode
Book Mark
Step
AUX
Sleep
Return
Sub Title
Sub Title
23
Setting up the language features
(Cont’d)
Setting up the language features
(Cont’d)
GB
Using the Subtitle Language
Using the Audio Language
Example: Setting up in ENGLISH.
Example: Setting up in ENGLISH.
1
1
Press the Setup button when in stop mode.
Press the Setup button when in stop mode.
SETUP MENU
SETUP MENU
1 PLAYER MENU
ENGLISH
1 PLAYER MENU
ENGLISH
2 DISC MENU
3 AUDIO
4 SUBTITLE
5 PARENTAL
6 AUDIO OPTIONS
7 DISPLAY OPTIONS
ENGLISH
ENGLISH
ENGLISH
UNLOCKED
2 DISC MENU
3 AUDIO
4 SUBTITLE
5 PARENTAL
6 AUDIO OPTIONS
7 DISPLAY OPTIONS
ENGLISH
ENGLISH
ENGLISH
UNLOCKED
RETURN
2
3
4
ENTER
Press the UP/DOWN (
/
) button to select to Audio.
Press the Enter button.
Press the UP/DOWN (
/
) button to select ENGLISH.
RETURN
2
3
4
ENTER
Use the UP/DOWN (
/
) button to select Sub Title.
/
) button to select 'ENGLISH'.
Press the Enter button.
Use the UP/DOWN (
SUBTITLE LANGUAGE
AUDIO LANGUAGE
1
ENGLISH
2
3
4
5
6
7
8
FRANCAIS
DEUTSCH
ESPAÑOL
ITALIANO
NEDERLANDS
ORIGINAL
OTHERS
AUTOMATIC
2
ENGLISH
3
4
5
6
7
8
FRANCAIS
DEUTSCH
ESPAÑOL
ITALIANO
NEDERLANDS
OTHERS
RETURN
RETURN
ENTER
ENTER
Select "ORIGINAL" if you want the default soundtrack language to be
the original language the disc is recorded in.
Select "OTHERS" if the language you want is not listed.
5
1
Press the Enter button.
Select "AUTOMATIC" if you want the subtitle language to be the same
as the language selected as the audio preference.
Select "OTHERS" if the language you want is not listed. Some discs
may not contain the language you select as your initial language; in that
case the disc will use its original language setting.
5
ENGLISH is selected and the screen returns to SETUP MENU.
Deck 1/2
Press the Enter button.
ENGLISH is selected and the screen returns to SETUP MENU.
Band
Volume
+
—
Volume
Zoom
Timer On/Off
Tuning
Mode
Sleep
Speaker Mode
Test Tone
Sound Edit
Angle
Audio
Book Mark
Step
1
Display
Set up
Title
2,3,4,5
Volume
Menu
Enter
—
AUX
Return
Sub Title
Zoom
Timer On/Off
Sleep
Speaker Mode
Test Tone
Sound Edit
Angle
Audio
Book Mark
Step
1
Display
2,3,4,5
Title
Menu
Set up
Enter
AUX
Return
Sub Title
How to make the SETUP MENU disappear or
return to menu screen during set up.
Press Return button.
If the selected language is not recorded on the disc, the original
pre-recorded language is selected.
24
Setting up the parental level
Setting up the parental level
GB
The Parental Level function works in conjunction with DVDs
that have been assigned a rating - which helps you control the
types of DVDs that your family watches. There are up to 8 rating levels on a disc.
Example: Setting up in LEVEL 6
1
2
3
SETTING THE PASSWORD
1
SETTING THE PARENTAL LEVEL
Press the Setup button when in stop mode.
SETUP MENU
1 PLAYER MENU
ENGLISH
2 DISC MENU
3 AUDIO
4 SUBTITLE
5 PARENTAL
6 AUDIO OPTIONS
7 DISPLAY OPTIONS
ENGLISH
ENGLISH
ENGLISH
UNLOCKED
RETURN
2
3
4
Press the UP/DOWN (
/
Move to the RATING LEVEL by using the UP/DOWN (
and press the Enter button.
1
RATING LEVEL
2
CHANGE PASSWORD
/
) button
) button to select PARENTAL.
Press the Enter button and enter your 4-digit password by pressing
the 0-9 button.
Move to CHANGE PASSWORD by using the UP/DOWN (
button and press the Enter button.
/
RETURN
5
ENTER
Move to LEVEL 6 by using the UP/DOWN (
the Enter button.
1
RATING LEVEL
2
CHANGE PASSWORD
RETURN
/
) button and press
RATING LEVEL
)
UNLOCK
LOCK LEVEL 8ADULT
LEVEL 7
LEVEL 6
LEVEL 5
LEVEL 4
LEVEL 3
LEVEL 2
LEVEL 1 KIDS SAFE
PARENTAL CONTROL
5
) button to select PARENTAL.
Press the Enter button and enter your 4-digit password by pressing
the 0-9 button.
ENTER
Press the UP/DOWN (
/
PARENTAL CONTROL
'7777' is the original password that has been encrypted in the player.
4
Press the Setup button when in stop mode.
RETURN
ENTER
ENTER
The disc which contains LEVEL 7 or LEVEL 8 will now not play.
Volume
Enter the new password.
—
After entering the new password, reenter it one more time to make sure
the password works.
Zoom
Timer On/Off
The Parental Level function is compatible only with parental level encoded discs.
Sleep
Speaker Mode
Test Tone
Sound Edit
Angle
Audio
Book Mark
Step
1
Display
Set up
Title
2,3,4,5
Menu
Enter
Volume
AUX
Return
Sub Title
—
Zoom
Timer On/Off
Sleep
Speaker Mode
Test Tone
Sound Edit
Angle
Audio
Book Mark
Step
1
Display
Set up
Title
2,3,4,5
Menu
How to make the SETUP MENU disappear or
return to menu screen during set up.
Enter
AUX
Return
Sub Title
Press Return button.
What if a DVD's rating exceeds the player's rating level?
The player alerts you when you try to play a DVD with a rating
that exceeds the level you've set.
The message, "Your selection exceeds the rating level for this
player." appears on screen.
Some discs are authorized with a rating override feature included
When you play a disc with this feature, the message, "Your selection exceeds the rating level for this player. Override the level?" is
displayed. Select "Override" or "Cancel." If you choose to override
the rating level, you will need to enter your 4-digit password to
begin playback.
25
Setting up audio options
GB
1
Press the Setup button when in stop mode.
DTS
SETUP MENU
1 PLAYER MENU
ENGLISH
2 DISC MENU
3 AUDIO
4 SUBTITLE
5 PARENTAL
6 AUDIO OPTIONS
7 DISPLAY OPTIONS
ENGLISH
ENGLISH
ENGLISH
UNLOCKED
RETURN
ENTER
2
Use the UP/DOWN ( /
press the Enter button.
) button to select AUDIO OPTIONS. Then
3
Use the UP/DOWN ( /
press the Enter button.
) button to select the desired item. Then
ON
Outputs DTS BITSTREAM via only digital output. Select DTS when
connecting to a DTS DECODER.
OFF
Doesn't output digital signal.
DYNAMIC COMPRESSION
ON
To select dynamic compression.
OFF
To select the standard range.
2X SCAN AUDIO
AUDIO OPTIONS
1
2
3
4
5
6
DOLBY DIGITAL OUT
MPEG-2 DIGITAL OUT
DTS
DYNAMIC COMPRESSION
2X SCAN AUDIO
SPEAKER SETUP
RETURN
BITSTREAM
BITSTREAM
OFF
ON
OFF
ENTER
ON
Turn 2 x audio on.
OFF
Turn 2 x audio off.
Though 2 x SCAN AUDIO is ON in SETUP MENU, no sound will be heard
on discs which are recorded with LPCM or DTS.
DOLBY DIGITAL OUT/MPEG-2 DIGITAL OUT
A digital surround sound format that is recorded by Dolby Digital/MPEG-2
Audio. Select the suitable output signal type of DIGITAL AUDIO OUTPUT/MPET-2 DIGITAL OUT (Bitstream/PCM) during playback.
DTS
This program features discrete 5.1 channel sound-track and must be
played though DTS-capable equipment. When played through DTS
equipment, sound will be heard from all five system speakers and a subwoofer.
DYNAMIC COMPRESSION
Compresses the dynamic range (quietest to loudest sound) of a disc's
soundtrack. This function is disc-dependent, and may not work with all
DVDs.
2 x SCAN AUDIO
Turns audio off or on when a disc is in 2 x playback mode.
SPEAKER SETUP
Adjusts the speaker size, the sound balance between speakers, etc.
4
Use the UP/DOWN ( /
press the Enter button.
) button to select the desired item. Then
DOLBY DIGITAL OUTPUT
PCM
Converts to PCM(2CH) of 48kHz/16Bit. Select PCM when using the
Analog Audio Outputs.
BITSTREAM
Convert to Dolby Digital BITSTREAM (5.1CH). Select BITSTEREAM
when using the Digital Audio Output.
MPEG-2 DIGITAL OUT
PCM
Converts to PCM (2CH) of 48KHz/16Bit. Select PCM when using the
Analog Audio Outputs.
BITSTREAM
Convert to MPEG-2 Audio BITSTREAM. Select BITSTEREAM when
using the Digital Audio Output.
Be sure to select the correct Digital Output or no audio will be
heard.
26
Tuning
Mode
Volume
—
Zoom
Timer On/Off
Sleep
Speaker Mode
Test Tone
Sound Edit
Angle
Audio
Book Mark
Step
1
Display
2,3,4
Title
Menu
Set up
Enter
AUX
Return
Sub Title
Setting up audio options (Cont’d)
GB
SPEAKER SETUP Function
1
2
3
4
5
SPEAKER SETUP
1
Press the Setup button when in stop mode.
SETUP MENU
12
1 PLAYER MENU
ENGLISH
2 DISC MENU
3 AUDIO
4 SUBTITLE
5 PARENTAL
6 AUDIO OPTIONS
7 DISPLAY OPTIONS
ENGLISH
ENGLISH
ENGLISH
UNLOCKED
RETURN
2
RETURN
BITSTREAM
BITSTREAM
ON
OFF
ON
RETURN
ENTER
3
Use the UP/DOWN (
/
4
then press the Enter button.
Use the UP/DOWN ( / ) button or LEFT/RIGHT ( /
to select the desired item, then press the Enter button.
Sleep
Speaker Mode
Test Tone
Sound Edit
Angle
) button
Audio
7
2
This sets the volume for the center speaker.
3
This selects the size (large, small or none) of the center speaker. Select
“small” for the accessory speaker.
4
This adjusts the delay time for the center speaker (delay time in regard to
the front speakers).
5
This selects the size (large/small) of the right front speaker. The right
front speaker follows the left front speaker. Operation is not required
when selection has been made for 1 .
6
This selects super woofer status.
7
This selects the size (large/small/none) of the right surround speaker. The
right left surround 11 also changes at the same time.
Select “small” for the accessory speakers.
8
This sets the volume for the right surround speaker.
9
This adjusts the delay time for the left and the right surround speaker
(delay time in regard to the front speakers). The left and the right speaker
change together.
10
11
This sets the volume level for the left surround speaker.
12
When TEST (test tone) has been selected, test noise is put out sequentially from the speakers, starting with the left front speaker. Check that the
test noise can be heard from all speakers and that the same volume is
heard from all speakers.
If the volume is different for some speakers, return to the previous step
and adjust the volume for that speaker.
SPEAKER SETUP
ENTER
8
This selects the size (large/small) of the left front speaker. The size of the
speaker picture changes. The right front speaker 5 also changes at the
same time. Volume adjustment is not possible for the front speakers.
Select “large” for the accessory speakers.
) button to select the SPEAKER SETUP,
RETURN
9
1
AUDIO OPTIONS
DOLBY DIGITAL OUT
MPEG-2 DIGITAL OUT
DTS
DYNAMIC COMPRESSION
2X SCAN AUDIO
SPEAKER SETUP
ENTER
11 10
ENTER
Use the UP/DOWN ( / ) button to select AUDIO OPTIONS.
Then press the Enter button.
1
2
3
4
5
6
6
Book Mark
This selects large, small, or none for the left surround speaker. The right
surround speaker 7 follows this setting. Operation is not required when
selection has been made for 7 .
Step
1 Display
2,3,4
Menu
Title
Set up
Enter
AUX
Return
Sub Title
Operation method for speaker setting:
Movement mode : When the marks for
ENTER
When [Delay time setting] is selected
are displayed at
the right bottom of the screen, movement between the
boxes on the screen is possible.
Press the UP/DOWN (
(
/
/
) button or the LEFT/RIGHT
) button to move between the boxes.
To adjust the selected item, press the ENTER button to
enter into adjustment mode.
Adjustment mode : When the marks for
ENTER are displayed at the
right bottom of the screen, adjustment for the respective box is possible. Press the UP/DOWN ( / ) button to adjust the speaker size, the volume, etc. To move to
the next box after completion of adjustment, press the
ENTER button to switch to movement mode.
How to make the SETUP MENU disappear or
return to menu screen during set up.
Press Return button.
The ideal listening position for 6-channel surround playback is the point at equal
distance from all speakers.
By setting the delay time for the center and surround speakers, this item realizes the ideal listening position virtually. (The center and surround speakers can
be set as if they are laid out on the dotted line circle shown below.)
[Center speaker setting]
(A) = Df - Dc
• When Df = Dc or Df < Dc in
the figure under “Delay time
setting”, set this value to 0 ms.
[Surround speaker setting]
(B) = Df - Dc
• When Df = Ds in the figure
under “Delay time setting”, set
this value to 0 ms.
Distance A
Approx. 40cm
Approx. 80cm
Approx. 120cm
Approx. 160cm
Approx. 200cm
Setting
1 ms
2 ms
3 ms
4 ms
5 ms
Distance B
Approx. 120cm
Approx. 240cm
Approx. 360cm
Approx. 480cm
Approx. 600cm
Setting
3 ms
6 ms
9 ms
12 ms
15 ms
27
Setting up display options
Setting up display options
GB
1
SCREEN MESSAGES
Use this feature to turn the on-screen displays that appear in screen on
or off.
Press the Setup button in stop mode.
SETUP MENU
1 PLAYER MENU
ENGLISH
2 DISC MENU
3 AUDIO
4 SUBTITLE
5 PARENTAL
6 AUDIO OPTIONS
7 DISPLAY OPTIONS
ENGLISH
ENGLISH
ENGLISH
UNLOCKED
RETURN
2
ENTER
BLACK LEVEL
Adjust the brightness of screen.
QUASI – PAL
Depending on a disc, you can play a NTSC DVD disc by QUASI-PAL
mode.
Use the UP/DOWN ( / ) button to select DISPLAY OPTIONS.
Then press the Enter button.
3
Use the UP/DOWN ( /
press the Enter button.
DVD/CD
) button to select the desired item. Then
DECK
DISPLAY OPTIONS
1 TV ASPECT
2 ANGLE MARK
3 STILL MODE
4 SCREEN MESSAGES
5 BLACK LEVEL
6 QUASI – PAL
RETURN
WIDE
ON
AUTO
ON
OFF
ON
Deck 1/2
+
Volume
Tuning
Mode
ENTER
TV ASPECT : Depending on the type of television you have, you may
want to adjust the screen setting (aspect ratio).
ANGLE MARK : Use to turn on or off the on-screen displays when DVDs
plays multiple angles of a particular scene.
Volume
—
Zoom
Timer On/Off
STILL MODE : Prevent picture shaking in still mode and display small
text clearer.
SCREEN MESSAGES : Use to turn on-screen messages on or off.
Band
Sleep
Speaker Mode
Test Tone
Sound Edit
Angle
Audio
Book Mark
Step
1
Display
2,3,4
Title
Menu
Set up
Enter
BLACK LEVEL
QUASI – PAL
4
Use the UP/DOWN ( / ) button to select the desired item.
Then press the Enter button
TV ASPECT
4:3 LETTER BOX :
Select when you want to see the total 16:9 ratio screen DVD supplies,
even though you have a TV with a 4:3 ratio screen. Black bars will
appear at the top and bottom of the screen.
4:3 PAN-SCAN :
Select this for conventional size TVs when you want to see the central
portion of the 16:9 screen.
(Extreme left and right sides of movie picture will be cut off.)
16:9 WIDE :
You can view the full 16:9 picture in your widescreen TV.
ANGLE MARK
ON :Displays ANGLE MARK in the upper right corner of screen.
OFF : Doesn’t display it.
STILL MODE
FIELD : Select this feature when the screen shakes in the AUTO
mode.
FRAME : Select this feature when you want to see small letters more
clearly in the AUTO mode.
AUTO : When selecting AUTO, FIELD/FRAME mode will be automatically converted.
28
AUX
Return
Sub Title
Dolby Surround
Dolby Surround
GB
The Dolby Surround feature and the center and rear speakers
(standard) assure full-scale home theater sound. When playing
back laser discs or video software that have been specially
recorded with four-channel sound (left, right, center, rear)and
streering logic(for sound directionality), astonishingly realistic
sound surrounds the listener to create a new level of
audio/visual entertainment.
Positioning The Speakers
Adjusting Speaker Level Balance
The unit is equipped with a built-in test signal generator called a
noise sequencer which outputs a noise signal that ‘travels’ from
channel to chanel. This enables the simple adjustment of sound
levels, to achieve, at the listening position, the same apparent
loudness from each channel. Use the remote control.
1
To achieve the optimum effects obtainable with this Dolby Surround
system, it is important to position the speakers properly. Refer to the
following illustration to find the best location in your room.
Press the Dolby Surround button to select PRO-LOGIC.
Result: “
2
PRO-LOGIC” appears on the displayed.
Press the Test Tone button.
A noise signal is sent to each channel in turn in the following
sequence.
1
2
L
Front speakers
Surround speakers
Place the surround speakers directly to the side of or slightly
behind the listening area.
No sound is heard from the center and surround speakers
when the Dolby Surround or DSP are set to off.
The center speaker is heard only when the Dolby Surround
is set to on.
L
Set
TV
3
4
Press the Test Tone button again to stop the noise signal.
To change the sound levels or delay time after adjusting the balance
with the noise sequencer.
Press the Sound Edit button.
While L, R, CNTR, REAR is displayed, press the UP/DOWN
(
/
) button.
Press the Speaker Mode button.
While CNTR, REAR, DELAY TIME is displayed, press the
UP/DOWN ( / ) button.
– CNTR : Large/Small/None
– REAR : USE/None
– DELAY TIME : 15/20/25/30 MS
DSP/EQ Dolby Surround
4
1
REAR
When the Dolby surround system is on, this function can be
operated.
R
C
R
(L : Left Speaker, CNTR : Center Speaker,
R : Right Speaker, REAR : Rear Speaker)
Center speaker
Position in the center of the two front speakers.
3
CNTR
2
1
5
6
7
8
9
Disc Skip
10/0
Clear
S.Bass
Power Sound
Program
Repeat
1
DVD/CD
DECK
S
S
Deck 1/2
3
Band
+
3
Volume
Tuning
Mode
Volume
—
4
Timer On/Off
Sleep
Speaker Mode
Test Tone
Sound Edit
Zoom
Angle
4
Audio
Book Mark
Step
Display
4
Menu
Title
2,3
Set up
AUX
Return
Enter
Sub Title
DOLBY SURROUND
PRO
LOGIC
Manufactured under license from Dolby Laboratories.
“DOLBY”, “Pro Logic” and the double-D symbol are
trademarks of Dolby Laboratories. Confidential
Unpublished Works. ©1992-1997 Dolby Laboratories.
All rights reserved.
DIGITAL OUT
“DTS” and “DTS Digital Surround” are trademarks of
Digital Theater Systems, Inc.
29
Dolby Surround (Cont’d)
Dolby Surround (Cont’d)
GB
Dolby Surround modes
Additional Dolby Surround modes
Press the Dolby Surround button.
PRO-Logic is selected, and the playback sound has the Dolby
Surround effect.
In addition to the PRO-Logic mode, this unit is also equipped with the
3 STEREO modes.
PRO-Logic : Use this mode when rear speakers are connected. The
center channel signals are output through the left and right speakers.
PRO-LOGIC
To cancel Dolby Surround mode
Press the Dolby Surround button repeatedly until OFF is
displayed.
3 STEREO
OFF
3 STEREO : Use this mode when no rear speakers are connected. This
mode reproduces rear sounds through the front speakers.
3 STEREO
Depending on the sound source or listening conditions, a surround
effect may not be obtained even when the Dolby Surround is on.
The full Dolby Surround effect cannot be obtained when using softDOLBY SURROUND
ware without
mark. In this case, use the DSP
system instead. P R O L O G I C
On/Standby
Open/Close
1
2
OFF
Mute
3
DSP/EQ Dolby Surround
4
5
7
8
6
9
Disc Skip
10/0
Clear
S.Bass
Power Sound
Program
Repeat
1
TM
DVD/CD
DECK
Deck 1/2
Manufactured under license from Dolby Laboratories Licensing
Corporation. DOLBY, the double-D symbol
and “PRO LOGIC”
are trademarks of Dolby Laboratories Licensing Corporation.
Band
+
Volume
On/Standby
When playing DVD, if an Audio is Dolby Digital, it can not be
operated.
When being connected to headphones and microphone, this
function cannot be operated.
Open/Close
1
2
Mute
3
DSP/EQ Dolby Surround
4
5
6
7
8
9
Disc Skip
10/0
Clear
S.Bass
Power Sound
Program
Repeat
1
DVD/CD
DECK
Deck 1/2
Band
+
Volume
30
Searching for and Storing the Radio
Stations
Searching for and Storing the Radio
Stations
GB
You can store up to:
Volume
6
+
On/Standby
15 FM stations
8 MW stations
7 LW stations
R
1
Demo
TUNER
Select the TUNER function by pressing TUNER on the front panel.
Band
To search for a
station...
Press Tuning Mode
Manually
Automatically
One or more times until MANUAL is displayed.
One or more times until AUTO is displayed.
TAPE
5
8
CD Synchro
Display
Deck 1/2
TAPE
7
REC Lock
AUX
REC/Pause
REV. Mode
4
Down
Tuning Mode
HI-Speed
Up
5,8
s
Select the station to be stored by:
Turning the Multi Jog knob to the right or to the left to increase or
decrease the frequency respectively
or
Pressing Tuning
or
on the remote control
Open/Close
1
2
3
4
5
6
7
8
9
Disc Skip
10/0
Clear
Mute
DSP/EQ Dolby Surround
S.Bass
Power Sound
Program
Repeat
DVD/CD
DECK
Deck 1/2
7
8
Adjust the volume by:
Turning the Volume knob on the front panel
or
Pressing the VOL. + or – buttons on the remote control
lby d
D o ro un
S ur
On/Standby
To scroll through the frequencies faster when searching manually, hold down the Tuning Mode Down or Up buttons.
The automatic search procedure may stop on a frequency that
does not correspond to a radio station. If this happens, use the
manual search mode.
6
d
TAPE REC
Normal
5,8
s
Select the required frequency band by pressing TUNER (Band)
again on the front panel or Tuner (Band) on the remote control.
Result: The appropriate indication is displayed:
FM
Frequency Modulation
AM(MW)
Medium Wave
LW
Long Wave
Memory
DVD/CD
ter
En
Mono/ST
–
DOLBY DIGITAL
Ba
5
2,3
S.
4
Timer
/Clock
Display
Switch the system on by pressing On/Standby.
D S P/E Q
1
2
3
P/S
ou
n
RDS
PTY
Band
+
5
5
Volume
4
Tuning
Mode
Select the stereo or mono mode by pressing Mono/ST.
Volume
If you do not want to store the radio station found, revert to Step 4
and search for another station.
Otherwise:
a Press Memory.
Result: The PRGM is displayed for a few seconds.
—
Zoom
Timer On/Off
Sleep
Speaker Mode
Test Tone
Sound Edit
Angle
Audio
Book Mark
Step
Display
b Press Tuning Mode Down and Up to assign a program number
between 1 and 15.
c Press Memory to store the radio station.
Result: PRGM is no longer displayed and the station is stored.
9
To store any other radio frequencies required, repeat Steps 3 to 8.
The PROGRAM function can be used to assign a new station to
an existing program number.
31
Selecting a Stored Station
GB
You can listen to a stored radio station as follows:
1
2
3
Switch the system on by pressing On/Standby.
Improving Radio Reception
You can improve the quality of radio reception by:
Rotating the FM or AM(MW) aerial
Testing the positions of the FM and AM(MW) aerials before fixing them
permanently
Select the TUNER function by pressing Band on remote control.
If reception from a specific FM radio station is poor, press Mono/ST.
to switch from stereo mode to mono. The quality of the sound will be
improved.
Select the required frequency band by pressing Band on the remote
control or TUNER (Band) again on the front panel.
4
Press the Tuning Mode button on the front panel of the unit, or the
Tuning Mode button on the remote control until “PRESET” is displayed.
5
Tuning the Multi-Jog on the front panel left or right until the desired
station is found.
or
Select the desired station by pressing the station number stored,
using the Tuning
or
button on the remote control.
Result: The desired station is now received.
Demo
RDS
PTY
Timer
/Clock
Display
DOLBY DIGITAL
TUNER
DVD/CD
TAPE
Band
Mono/ST
Memory
CD Synchro
Display
Deck 1/2
TAPE
REC/Pause
Phones
1
On/Standby
Open/Close
1
2
3
4
5
6
7
8
9
Disc Skip
10/0
Clear
Mute
DSP/EQ Dolby Surround
S.Bass
Power Sound
Program
Repeat
DVD/CD
DECK
Deck 1/2
Band
+
5
5
Volume
4
Tuning
Mode
Volume
—
Zoom
Timer On/Off
Sleep
Speaker Mode
Test Tone
Sound Edit
Angle
32
Audio
Book Mark
Step
Display
2,3
REC Lock
REV. Mode
TAPE REC
HI-Speed
Normal
Down
Tuning Mode
Up
About RDS broadcasting
About RDS DISPLAY function
GB
This unit has the RDS (Radio Data System) function, which
enables for the various information such as broadcasting station, radio text, time and 30 types of programs (News, Rock,
Classic, etc.) to be received from the FM RDS station together
with normal radio signal.
1
2
3
Press the On/Standby button.
Receive the FM radio.
See the radio receiving method on the page 31.
FM and frequency are shown on the display
If the received station transfers the RDS information, 'RDS'
appears automatically on the display.
Press the RDS Display button to select the desired RDS mode.
Whenever the button is pressed, RDS mode changes as follows.
PS NAME
RT
CT
About "PS NAME" MODE
Displays the name of broadcasting station.
Press the RDS Display button to select the PS NAME.
"PS NAME" appears on the display.
If the PS information is being received, the PS name (BBC, AFO,
NDR, etc.) is shown on the display.
If the PS information isn't received, the original FM frequency is
shown.
Even though no RDS Display button is pressed, the reception
of PS information ensues the PS name is displayed.
Demo
Current FM frequency
RDS
PTY
Display
Timer
/Clock
DOLBY DIGITAL
The RDS function is available only in FM broadcasting.
Description on RDS function
TUNER
DVD/CD
TAPE
About 'RT' MODE
1. PTY (Program Type) : Displays the type of programme currently being broadcast
Displays the character transmitted from the broadcasting station.
2. PS NAME (Program Service Name) : Indicates the name of
broadcasting station and is composed of 8 characters.
3. RT (Radio Text) : Decodes the text broadcast by a station (if
any) and is composed of maximum 64 characters.
4. CT (Clock Time) : Decodes the real time clock from the FM frequency.
Some stations may not transmit PTY, RT or CT information
therefore this may not be displayed in all cases.
5. TP (Traffic Program) : Indicates that the turned station is capable of transmitting traffic broadcasts.
Press the RDS Display button to select the RT MODE.
"RT" appears on the display.
If the RT information is being received, the received information is
shown on the display.
If the RT information isn't received, the "NO RT" is shown.
On the display.
Demo
6. TA (Traffic Announcement) : When this symbol flashes it
shows that the traffic announcement is in progress.
RDS
PTY
Display
Timer
/Clock
DOLBY DIGITAL
7. EON (Enhanced Other Networks Information) : Offers the RDS
information on other networks.
TUNER
DVD/CD
TAPE
About CT(Clock Time)
On/Standby
Sets the time of RDS clock.
1
To select the CT time, set the RDS Display button to CT MODE.
R
Demo
RDS
PTY
Display
The CT information will take up to 2 minutes to be decoded therefore the clock isn’t displayed immediately.
If there is no received CT information, "NO CT" is displayed.
Timer
/Clock
DOLBY DIGITAL
3
TUNER
Band
DVD/CD
TAPE
Demo
RDS
PTY
Display
Timer
/Clock
DOLBY DIGITAL
TUNER
DVD/CD
TAPE
33
PTY (Program Type) indication and
PTY-SEARCH function
GB
The PTY information is composed of an identification symbol,
which helps the FM radio to recognize the program type of each FM
station.
The 30 PTY modes are shown in the display by pressing the PTY
button.
About PTY-SEARCH
1
Tuned to an FM station broadcasting a PTY MODE.
See the FM receiving method on the page 31.
If the received station is transmitting the RDS information, "RDS"
lights up.
2
Press the PTY button.
The PTY MODE(NEWS, AFFAIRS, etc) appears on the display.
Press the Tuning Mode Down or Up button to select the desired
PTY MODE.
Program Type
Display
NEWS
• News including an announced opinion and report
AFFAIRS
• Several matters including a current incident, documentary,
discussion and analysis.
INFO
• Information including weights and measures, returns and forecast, matters interesting the customer, medical information, etc.
SPORT
• Sports
EDUCATE
• Education
DRAMA
• Drama-Radio serial, etc.
CULTURE
• Culture-National or local culture including the religious problem,
social science, language, theater,etc.
SCIENCE
• Natural science and technology
VARIED
• Others-Speech, amusing program (quiz, game), interview,
comedy and satirical play, etc.
POP M
• Pop music
ROCK M
• Rock music
M.O.R.M
• M.O.R- Comfortable music, occasionally vocal or piece
LIGHT M
• Light classical music- Classical music and instrumental
and chorus music
CLASSICS
• Heavy classical music-Orchestra music, symphony, chamber
music and opera
If the station is transmitting no PTY information, 'NO PTY' shows
on the display.
When the PTY MODE is selected(The PTY MODE is shown in the
display), press the PTY KEY once again to convert into
PTY-SEARCH MODE and auto-search the station sequentially.
If a station is found broadcasting required PTY MODE then the
search station and the stop is selected.
If the PTY MODE isn’t found it is retuned to the original station frequency at beginning the PTY SEARCH and auto-search and PTY
SEARCH are suspended.
Demo
2
RDS
PTY
Timer
/Clock
Display
DOLBY DIGITAL
TUNER
DVD/CD
TAPE
Band
• Other music - Jazz, R&B country music
WEATHER
• Weather
FINANCE
• Finance
CHILDREN
• Children’s programmes
Mono/ST
Memory
CD Synchro
Display
Deck 1/2
REV. Mode
P
OTHER M
TAPE
PHONE IN
TRAVEL
LEISURE
JAZZ
COUNTRY
NATION M
OLDIES
FOLK M
DOCUMENT
TEST
34
• Religion
• Phone in
• Travel
• Leisure
• Jazz Music
• Country Music
• National Music
• Oldies Music
• Folk Music
• Documentary
• Alarm Test
Down
Tuning Mode
Up
S.
RELIGION
• Social affairs
HI-Speed
Normal
D S P/E Q
SOCIAL
REC Lock
TAPE REC
2
REC/Pause
Listening to a Cassette
CD Synchro Record Feature
GB
Always treat your cassettes with care; refer, if necessary, to
the section entitled “Precautions When Using Audio Cassettes”
on page 42.
1
2
3
4
5
This feature enables you to synchronize the start of the
recording with the start of the disc or track of your choice.
Select the TAPE function by pressing TAPE on the front panel.
Open either cassette deck 1 or 2 by pushing and releasing the deck
cover where PUSH EJECT ( ) is written.
Insert the pre-recorded cassette with the open edge of the tape facing downward.
Close the deck by pushing on it until it clicks into place.
Result: Depending on the deck selected, the 1 or 2 indication is
displayed in front of the counter number.
If you have inserted two cassettes, press Deck 1/2 on the front panel
or directly the Deck 1/2 button on the remote control to select the
cassette to be played.
Result: Depending on the deck selected, the TAPE 1 or TAPE 2 indication is displayed.
7
8
Synchronised recording
Direct recording
Switch the system on by pressing the On/Standby button.
If you insert a cassette in both decks, the system selects the
deck in which you inserted the second cassette.
6
You can record a compact disc on a cassette in two different
ways:
1
2
3
4
5
6
Switch the system on by pressing On/Standby.
7
To stop...
Insert a blank cassette in Deck 2.
Select the DVD/CD function by pressing DVD/CD on the front panel.
Load a compact disc.
Select the required disc.
Select the required track and press CD Synchro or press CD
Synchro directly to start recording at the beginning of the disc.
Result: REC is displayed and recording starts.
Press ...
Recording and playing the compact disc
To listen to...
Press ...
Side A
TAPE (
)
Side B
TAPE (
)
Result: The cassette starts playing.
DECK 1 and DECK 2
DECK 2 only
The function of CD Synchro is operated in only CD.
When the cassette is stopped, select one of the following functions
as required.
To...
Rewind the cassette
Fast-forward the cassette
On/Standby
Press ...
R
1
Demo
RDS
PTY
Timer
/Clock
Display
3
DOLBY DIGITAL
TUNER
On/Standby
DVD/CD
TAPE
Band
R
1
Mono/ST
Demo
Memory
CD Synchro
Display
Deck 1/2
TAPE
RDS
PTY
Timer
/Clock
Display
REC Lock
6
Down
REV. Mode
TAPE REC
HI-Speed
Normal
7
Tuning Mode
D S P/E Q
REC/Pause
Up
DOLBY DIGITAL
2,7
TUNER
DVD/CD
TAPE
Band
Mono/ST
Memory
CD Synchro
REC Lock
Down
8
Display
6
Deck 1/2
Tuning Mode
TAPE
REV. Mode
TAPE REC
HI-Speed
Normal
Up
D S P/E Q
REC/Pause
8
35
Recording a Compact Disc
Recording a Radio Program
GB
The direct recording mode enables you to start recording with
any track on the compact disc.
You can only record on cassettes in Deck 2.
You do not need to adjust the volume, as it has no effect on
the recording.
The CD must be in stop mode. When Record button is pressed
on Deck 1, recording starts and the CD starts playing automatically.
You can record a radio program of your choice.
You can only record on cassettes in Deck 2.
You do not need to adjust the volume, as it has no effect on
the recording.
1
2
3
4
Switch the system on by pressing On/Standby.
Select the required disc.
5
Press REC/Pause.
Result: REC is displayed in red and recording starts.
Select the required track on the compact disc and press
on the
front panel or
on the remote control to set the compact disc player to Pause mode.
6
When you have finished recording, press the
for Deck 2 on the
remote control or
on the front panel to stop recording.
1
2
3
4
5
6
Switch your system on by pressing On/Standby.
7
Press the REC/Pause.
Result: REC flashes.
Insert a blank cassette in Deck 2.
Select the DVD/CD function by pressing DVD/CD on the front panel.
Load the compact disc.
Insert a blank cassette in Deck 2.
Select the TUNER function by pressing TUNER on the front panel.
Select the radio station that you wish to record by pressing Tuning
or
on the remote control or by press the Tuning Mode
Down or Up on the front panel.
On/Standby
8
Press the
to start playing the track.
Result: The track is recorded on the cassette.
9
R
Demo
When you have finished recording, press
for Deck 2 on the
remote control or
on the front panel to stop recording.
1
RDS
PTY
Timer
/Clock
Display
3
DOLBY DIGITAL
TUNER
DVD/CD
TAPE
On/Standby
Band
R
Mono/ST
Demo
CD Synchro
Display
Deck 1/2
REC/Pause
s
RDS
PTY
TUNER
DVD/CD
TAPE
Memory
CD Synchro
Display
Deck 1/2
TAPE
7
REV. Mode
TAPE REC
HI-Speed
Normal
Down
9
Tuning Mode
Up
D S P/E Q
REC/Pause
REC Lock
REC Lock
Down
4
DOLBY DIGITAL
Band
Mono/ST
REV. Mode
TAPE REC
HI-Speed
Normal
6
Tuning Mode
Up
Timer
/Clock
Display
3,6,8
36
5
Memory
TAPE
1
4
Selecting the Cassette Playback
Mode (Deck 2 Only)
Copying a Cassette (Dubbing)
GB
You can copy a cassette from Deck 1 to Deck 2. Two options
are available:
Normal speed dubbing
High-speed dubbing
You do not need to adjust the volume, as it has no effect on the
recording.
Take care not to insert the tape to be copied in Deck 2, as it will
be erased when you start recording.
1
2
3
Switch your system on by pressing On/Standby.
4
To copy a cassette at...
Your mini-compact system has three cassette playback modes
which enable you to listen to both sides of a cassette automatically.
Press REV. Mode until the appropriate symbol is displayed.
When the display indicates... The mini-compact system plays back...
One side of the selected cassette and
then stops.
One side of the cassette.
The other side of the cassette and then
stops.
Insert a blank cassette in Deck 2.
Both sides of the cassette indefinitely until
you press stop.
Insert the tape to be copied in Deck 1.
Press...
Normal speed
Normal
High speed
Hi-Speed
Result: The appropriate indications are displayed and the cassette in
Deck 1 is copied to the cassette in Deck 2.
RDS
PTY
Timer
/Clock
Display
–
DOLBY DIGITAL
5
Press
on the front panel or
for each deck on the remote control when you have finished recording.
TUNER
DVD/CD
TAPE
AUX
Mono/ST
Memory
CD Synchro
Display
Deck 1/2
TAPE
REC Lock
HI-Speed
Normal
Down
Tuning Mode
d
TAPE REC
Up
D S P/E Q
REC/Pause
On/Standby
REV. Mode
P/S
ou
n
Band
S.
Ba
R
s
s
1
Demo
RDS
PTY
Timer
/Clock
Display
DOLBY DIGITAL
TUNER
DVD/CD
TAPE
Band
Mono/ST
Memory
CD Synchro
Display
4
Deck 1/2
TAPE
REC/Pause
ones
REC Lock
REV. Mode
TAPE REC
HI-Speed
Normal
Down
5
Tuning Mode
Up
37
Timer Function
GB
If the timer switch on and off times are identical, the word ERROR is
displayed.
The timer enables you to switch the system on or off at specific times.
Example: You wish to wake up to music every morning.
If you no longer want the system to be switched on or off automatically, you must cancel the timer.
Volume
+
On/Standby
R
Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
Demo
1,9
RDS
PTY
Timer
/Clock
Display
2
–
DOLBY DIGITAL
Memory
CD Synchro
Display
Deck 1/2
TAPE
REC/Pause
Press Enter.
Result: ON TIME is displayed (instead of the equalizer symbols) for
a few seconds, followed by any switch-on time already set;
you can set the timer switch-on time.
REV. Mode
Down
Tuning Mode
d
TAPE REC
HI-Speed
Normal
6
REC Lock
P/S
ou
n
Mono/ST
ter
En
7
3,4,5,6,7,8
Band
TIMER is displayed.
Press Timer/Clock until
Up
6
s
s
6
AUX
Ba
5
TAPE
S.
4
Switch the system on by pressing On/Standby.
DVD/CD
D S P/E Q
1
2
3
TUNER
lby d
D o ro un
S ur
4,5,7
Set the timer switch-on time.
a
Set the hour by tuning the Multi Jog knob to the right or to the left.
b
Press Enter.
Result: The minutes flash.
c
Set the minutes by tuning the Multi Jog knob to the right or to
the left.
d
Press Enter.
Result: OFF TIME is displayed (instead of the equalizer symbols)
for a few seconds, followed by any switch-off time already
set; you can now set the timer switch-off time.
Set the timer switch-off time.
a
Set the hour by tuning the Multi Jog knob to the right or to the left.
b
Press Enter.
Result: The minutes flash.
c
Set the minutes by tuning the Multi Jog knob to the right or to
the left.
d
Press Enter.
Result: VOL XX is displayed, where XX corresponds to the volume already set.
For the Protection of being Recorded
Press REC LOCK (recording protection) button.
When REC Lock (recording protection) lamp is lighted up all
of the buttons are not activated. (Volume, Demo key is activated.)
It is a function that the recording stop is prevented by other
button action during recording.
REC Lock (recording protection) is activated only during
recording.
When the REC Lock is on (the lamp is on), do not open the
cassette door.
When releasing, press REC Lock button once again.
Press Tuning Down and Up to adjust the volume level and press
Enter.
Result: The source to be selected is displayed.
Turn the Multi Jog knob to select the source to be played when the
system switches on.
If you select...
You must also...
TAPE (cassette)
Insert a recorded cassette in one of the
decks before setting the system to standby.
TUNER (radio)
a Press Enter.
b Select the FM or AM frequency band by
tuning the Multi Jog knob to the right or
to the left.
c Press Enter.
d Select a preset station by tuning the
Multi Jog knob to the right or to the left.
TUNER
DVD/CD
TAPE
Band
Mono/ST
Memory
CD Synchro
Display
Deck 1/2
TAPE
REC/Pause
CD (compact disc)
8
9
38
a Load one or more compact discs.
b Select the required disc.
Press Enter to confirm the timer.
Press On/Standby to set the system to standby mode.
Result:
is displayed to the bottom left of the time, indicating that
the timer has been set. The system will switch on and off
automatically at the required times.
es
REC Lock
REV. Mode
TAPE REC
HI-Speed
Normal
Down
Tuning Mode
Up
Mute Function
Power Sound Function
GB
This system is equipped with the Power Sound feature, which
makes the sound more powerful and full-bodied.
You can turn the sound off temporarily on your system.
Example: You wish to answer a telephone call.
1
2
Press Mute.
1
To switch the sound back on (at the same volume as before), press
Mute again or the Volume buttons.
Press P/Sound button on the front panel.
The P/Sound button on the front panel lights up green.
Result:
P--SOUND is displayed for a few seconds.
A more powerful resonant sound is diffused.
2
To cancel this function, press P/Sound again.
On/Standby
DVD/CD
3
5
6
DSP/EQ Dolby Surround
CD Synchro
Display
Deck 1/2
TAPE
8
9
Disc Skip
10/0
Clear
S.Bass
Power Sound
Program
Repeat
REV. Mode
HI-Speed
Normal
Down
Tuning Mode
d
TAPE REC
D S P/E Q
7
P/S
ou
n
2
4
AUX
ter
En
1
TAPE
Mute
Open/Close
Up
S.
Ba
s
s
DVD/CD
lby d
D o ro un
S ur
DECK
Cancelling the Timer
Selecting an Equalizer Preset
Your mini-compact system is equipped with a preset equalizer
that allows you to choose the most appropriate balance
between treble and bass frequencies, according to the type of
music you are listening to
After having set the timer, it will start automatically as shown
by the TIMER indication on the display. If you no longer wish
to use the timer, you must cancel it.
You can stop the timer at any time (system on or in standby mode).
Press DSP/EQ on the front panel or DSP/EQ on the remote control until
the required option is selected. Each time the DSP/EQ button is pressed in
sequence, the equalizer modes and sounds mode “POP, ROCK, CLASSIC,
CINEMA, HALL, LIVE, DISCO, PASS” are selected in this order.
To...
Press Timer-On/Off...
Cancel the timer
Once.
Result:
is no longer displayed.
Restart the timer
Twice.
Result:
is displayed again.
Equalizer mode
PASS
POP
ROCK
CLASSIC
CINEMA
HALL
LIVE
DISCO
Normal balance (linear)
Balance suitable for pop music
Balance suitable for rock music
Balance suitable for classic music
Balance suitable for cinema
Balance suitable for hall
Balance suitable for live
Balance suitable for disco
DVD/CD
DECK
Deck 1/2
Band
+
Volume
The corresponding indication in the display is preceded by a red arrow
(except for the normal balance Pass, for which nothing is displayed).
Tuning
Mode
Volume
—
DVD/CD
TAPE
AUX
Zoom
Display
Deck 1/2
TAPE
REV. Mode
TAPE REC
Tuning Mode
Up
Sleep
Speaker Mode
Test Tone
Sound Edit
Angle
Audio
Book Mark
Step
Display
Menu
Title
D S P/E Q
HI-Speed
Normal
Down
d
ter
En
CD Synchro
P/S
ou
n
Timer On/Off
Set up
Enter
AUX
Return
Sub Title
S.
Ba
s
s
lby d
D o ro un
S ur
39
Setting the System to Switch off
Automatically
Connecting Headphones
GB
You can set the system to switch off automatically.
Example: You wish to go to sleep to music.
1
Press Sleep.
Result: The following indications are displayed:
Connect the headphones to the Phones jack on the front panel.
Result: The loudspeakers are no longer used to output the sound.
90 MIN
2
You can connect a set of headphones to your mini-compact
system so that you can listen to music or radio programmers
without disturbing other people in the room. The earphones
must have a 6.3 mm jack or an appropriate adapter.
Press Sleep one or more times to indicate how long the system
should continue playing before it switches off:
Prolonged use of headphones at a high volume may damage
your hearing.
Mono/ST
At any time, you can:
Check the remaining time by pressing Sleep
Change the remaining time by repeating Steps 1 and 2
3
To cancel the automatic switch-off, press Sleep one or more times
the word SLEEP disappears.
Volume
—
Zoom
Timer On/Off
Sleep
Speaker Mode
Test Tone
Sound Edit
Angle
Audio
Book Mark
Step
Display
Menu
Title
Set up
Enter
AUX
Return
Sub Title
Super Bass Sound
Your mini-compact system has a bass amplification function
called S.Bass (Super Bass Sound). This function makes the
bass more powerful.
1
Press the S. Bass button on the front panel.
Result: SBS ON is displayed for a few seconds.
2
To cancel this function, press S. Bass again.
Display
Deck 1/2
TAPE
REV. Mode
HI-Speed
Up
D S P/E Q
Tuning Mode
d
TAPE REC
Normal
Down
AUX
ter
En
ynchro
TAPE
P/S
ou
n
DVD/CD
S.
Ba
s
s
40
lby d
D o ro un
S ur
Memory
CD Synchro
Display
Deck 1/2
TAPE
REC/Pause
Phones
REC Lock
REV. Mo
TAPE REC
HI-Spe
Normal
Down
Tuning Mode
Up
Connecting to an External Source
Safety Precautions
GB
The auxiliary input can be used to take advantage of the
sound quality of your mini-compact system when listening to
other sources.
Examples: A television
A video disc player
A DAT cassette player
A Hi-Fi stereo video cassette recorder
The following diagrams illustrate the precautions to be taken
when using or moving your mini-compact system.
Disc 1
Disc 2
Disc 3
Disc Change
Disc Selection / Direct Play
Disc 1
To connect the external source, the source must have an audio
output. In addition, you need an RCA connection cable.
Disc 2
Disc 3
Disc Change
Disc Selection / Direct Play
Volume
+
On/Standby
R
Volume
+
Demo
On/Standby
RDS
R
PTY
Timer
/Clock
Display
–
DOLBY DIGITAL
Demo
TUNER
RDS
PTY
Timer
/Clock
Display
DVD/CD
TAPE
AUX
Band
–
TAPE
Memory
CD Synchro
Display
Deck 1/2
REV. Mode
TAPE
AUX
P/S
ou
n
Deck 1/2
REV. Mode
REC Lock
Phones
d
TAPE REC
Down
HI-Speed
Tuning Mode
Up
Ba
TAPE
S.
Display
ter
En
CD Synchro
d
TAPE REC
Normal
D S P/E Q
REC/Pause
Band
Memory
ter
En
Mono/ST
DVD/CD
P/S
ou
n
DOLBY DIGITAL
TUNER
Mono/ST
s
s
REC Lock
Phones
HI-Speed
Normal
Down
Tuning Mode
Up
lby d
D o ro un
S ur
D S P/E Q
REC/Pause
S.
Ba
s
s
1
Set the system to standby mode and disconnect it and the external
source from the main.
2
Connect the audio cable to the rear of the mini-compact system.
Connect the...
To the connector marked...
Red jack
White jack
R (right)
L (left)
lby d
D o ro un
S ur
Ambient operating conditions:
Ambient temperature
5°C-35°C
Humidity
10-75%
Do not expose the unit to direct sun
radiation or other heat sources.
This could lead to overheating and
malfunction of the unit.
For optimum sound quality, do not invert the right and left
channels.
Disc 1
Disc 2
Disc 3
Disc Change
Disc Selection / Direct Play
Disc 1
Disc 2
Disc 3
Disc Change
Disc Selection / Direct Play
+
On/Standby
R
Volume
Demo
+
On/Standby
RDS
R
PTY
Timer
/Clock
Display
–
DOLBY DIGITAL
Demo
TUNER
RDS
PTY
Timer
/Clock
Display
DVD/CD
TAPE
TUNER
DVD/CD
TAPE
Memory
CD Synchro
Display
Deck 1/2
TAPE
AUX
HI-Speed
Normal
Display
Deck 1/2
REV. Mode
Down
Tuning Mode
Up
s
s
HI-Speed
Up
REC Lock
Phones
d
TAPE REC
lby d
D o ro un
S ur
D S P/E Q
Tuning Mode
Ba
TAPE
Normal
Down
S.
CD Synchro
ter
En
Memory
REC/Pause
P/S
ou
n
Band
Mono/ST
REC Lock
d
TAPE REC
D S P/E Q
REC/Pause
REV. Mode
ter
En
Mono/ST
Phones
AUX
Band
–
DOLBY DIGITAL
P/S
ou
n
3
Volume
Plug the system back into the main socket and press On/Standby to
switch it on.
S.
Ba
s
s
4
Select the AUX source by pressing AUX on the front panel one or
more times.
Result: AUX is displayed.
5
6
Switch the external source on.
lby d
D o ro un
S ur
Do not place potted plants or vases
on top of the unit. Moisture entering
the unit could lead to dangerous
electric shock and can cause
equipment damage. In such events
immediately disconnect the main
plug from the socket.
Adjust the volume and balance as required:
Volume
Equalizer
During thunderstorms, disconnect
the main plug from the socket.
Main voltage peaks due to lightning could damage the unit.
Example: You can watch a film and take advantage of stereo sound
provided that the original sound track is in stereo(as if you
were in a cinema).
VOLUME
UP
CENTER SPEAKER
(6Ω)
AUX IN
DOWN
L
SURROUND
SPEAKER
(6Ω)
R
FRONT
SPEAKERS
(6Ω)
Volume
+
On/Standby
R
Demo
RDS
Display
Timer
/Clock
When using headphones, take care
not to listen at excessive volumes.
Extended use of headphones at
high volumes will lead to hearing
damage.
–
DOLBY DIGITAL
TUNER
DVD/CD
TAPE
AUX
Band
Disc 1
Disc 2
Disc 3
Disc Change
Disc Selection / Direct Play
Volume
+
On/Standby
R
Demo
RDS
PTY
Timer
/Clock
Display
–
DOLBY DIGITAL
TUNER
DVD/CD
TAPE
AUX
Band
Memory
CD Synchro
Display
Deck 1/2
TAPE
REC Lock
HI-Speed
Normal
Down
Tuning Mode
d
TAPE REC
Up
D S P/E Q
REC/Pause
Phones
REV. Mode
ter
En
Mono/ST
P/S
ou
n
PTY
Remove the batteries from the
remote control, if not used for any
extended period.
Leaking batteries can cause serious
damage to the remote control.
S.
Ba
s
s
Do not place heavy items on the
main lead. Main cable damage can
lead to damage of the equipment (fire
hazard) and can cause electric
shock.
lby d
D o ro un
S ur
Do not remove any equipment panels.
The inside of the unit
contains live components, which
cause electric shock.
41
Cleaning Your Mini-Compact
System
Precautions When Using Compact
Discs
To obtain the best possible results from your mini-compact
system, you must clean the following elements regularly:
The outer casing
The compact disc player
The cassette players (heads, rollers and drive capstans)
Handle your compact discs with care. Always hold them by the
edges to avoid leaving fingerprints on the shiny surface.
When you have finished playing a compact disc, always put it back
in its case.
Do not fix paper or adhesive tape to the discs and do not write on
the label.
Clean them with a special-purpose cloth.
Store your compact discs in a clean place, out of direct sunlight,
where they will not be exposed to high temperatures.
Always use compact discs marked
.
GB
Always unplug the system from the wall outlet:
Before cleaning it
If you are not going to be using it for a long time
COMPACT
Outer Casing
Clean the outer casing regularly using a soft cloth and a light detergent. Do
not use abrasive powders, liquids or aerosol cleaners. Never let any liquids
get into the system.
DIGITAL AUDIO
Compact Disc Player
1
2
Before playing a compact disc, clean it with a special CD cleaning
agent. Do not use the same cleaning agents as for vinyl LP records.
Carefully wipe the disc from the centre outward.
Regularly clean the player with a special cleaning disc (available from
your local dealer).
Tape Decks
1
2
Press STOP/EJECT(
) to open the cassette deck.
Use a cotton bud and a special cassette cleaning agent to clean the:
Head (1)
Rollers (2)
Drive capstans (3)
If you will not be using the remote control for a long time,
remove the batteries to prevent corrosion.
Although your system is very hard-wearing, it should not be
used in an excessively dusty environment or subjected to
shocks or extreme heat (close to heating appliances or in
direct sunlight, etc.).
If the unit emits an unpleasant odor when in use, unplug it
from the main supply and contact the after-sales service.
3
1
42
2
Precautions When Using Audio
Cassettes
Check that the tape in the cassette is sufficiently taught.
To prevent erasing a cassette that you wish to keep, remove the
safety tab on the upper edge of the cassette. To record a cassette,
where the tab has been broken, simply cover the opening with
adhesive tape.
When you have finished playing a cassette, always put it back in its
case.
Store your cassettes in a clean place, out of direct sunlight, where
they will not be exposed to high temperatures.
Avoid using 120-minute cassettes as they place unnecessary strain
on the tape mechanism.
Disc type and characteristics
GB
This DVD player is capable of playing the following types of discs, having the corresponding logos:
Disc Types
Logos
Recording Disc Size
Types
Audio
+
Video
12 cm
Single-sided 2 layers 240 min.
Double-sided 2 layers 480 min.
Characteristics
• DVD contains excellent sound
and video due to Dolby Digital
and MPEG2 system.
• Various screen and audio functions can be easily selected
Double-sided 2 layers 160 min. through the on-screen menu.
Single-sided 2 layers 80 min.
8 cm
Audio
+
Video
Max.
Playing
Time
12 cm
74 min.
8 cm
20 min.
12 cm
74 min.
8 cm
20 min.
Audio
• Video with CD sound, VHS quality & MPEG1 compression technology.
• An LP is recorded as an analog
signal with more distortion. CD is
recorded as a Digital Signal with
better audio quality, less distortion and less deterioration of
audio quality over time.
* DO NOT play CD-ROM, CD-I, CD-R and DVD-ROM in this player! (CDGs play audio only, not graphics.)
Disc Markings
1
~
• Playback Region
Number
6
DIGITAL
STEREO
SOUND
NTSC
• NTSC broadcast
system in U.S.A,
Canada, Korea,
Japan, etc.
• Dolby Digital disc
• Digital Audio disc
• Stereo disc
• DTS disc
Playback Region Number
Both the MAX-DN55 player and the discs are coded by region. These regional codes must match in order for the disc to play.
If the codes do not match, the disc will not play.
The Region Number for this player is described on the rear panel of the player.
43
Before Contacting the After-Sales Service
GB
It always takes a little time to become familiar with a new appliance. If you have any of the problems listed below,
try the solutions given. They may save you the time and inconvenience of an unnecessary service call.
G
E
N
E
R
A
L
C
D
/
D
V
D
C
A
S
S
E
T
T
E
S
R
A
D
I
O
PROBLEM
CHECKS/EXPLANATION
The system does not work
• The main lead is not correctly plugged into a wall socket or the wall socket is not switched on.
• The remote control batteries need replacing or the polarity has not been respected.
• The On/Standby button has not been pressed.
There is no sound
• The volume has been completely turned down.
• The correct function (TUNER, CD, TAPE, AUX) has not been selected.
• You have connected a set of earphones.
• The loudspeaker wires have been disconnected.
• The Mute button has been pressed.
The Timer does not work
• The timer has been stopped by pressing Timer On/Off.
System still doesn’t work, even
after following steps above.
• Press the S. Bass button for 5 seconds in power ‘OFF’(standby), the system is
returned the original position (RESET)
The compact disc player
does not start playing
• The CD function has not been selected.
• The disc has been inserted face down or is either dirty or scratched.
• The laser sensor is dirty or dusty.
• The system has not been installed on a flat, horizontal surface.
• Condensation has formed in the player; leave the system in a warm, airy room for at least one hour.
• This player cannot play CD-ROMs, DVD-ROMs, CD-R, etc. Insert a DVD, a VIDEO-CD or a CD.
The
icon appears on
screen.
• The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is out of range.
Disc Menu doesn’t appear.
• Check if the disc has a Menu.
Playback mode differs from
the Setup Menu selection
• Some of the functions selected in the Setup Menu may not work properly if the disc
is not encoded with the corresponding function.
The screen ratio cannot be changed.
• The Screen Ratio is fixed on your DVDs.
The tape does not start
playing
• The TAPE function has not been selected.
• The cassette has not been inserted correctly.
• The cassette player has not been closed.
• The tape is either slack or broken.
The volume falls off
The cassette is not erased correctly
There is excessive wow and flutter
• The audio heads are dirty.
• The rollers or drive capstans are dirty.
• The tape is worn.
Reception is poor or no radio
stations are received at all
• The TUNER function has not been selected.
• The radio frequency has not been correctly selected.
• The aerial has been disconnected or is not facing the right way. Turn it until you find the
best orientation.
• You are in a building that blocks radio waves; you must use an outside aerial.
If the above guidelines do not allow you to solve the problem, take a note of:
The model and serial numbers, normally printed on the rear of the system
Your warranty details
A clear description of the problem
Then contact your local dealer or SAMSUNG after-sales service.
44
Technical Specifications
GB
SAMSUNG strives to improve its products at all times. Both the design specifications and these user
instructions are thus subject to change without notice.
RADIO
LW
Usable sensitivity
60 dB
AM (MW)
Signal/noise ratio
40 dB
Usable sensitivity
54 dB
Total harmonic distortion
2%
FM
Signal/noise ratio
60 dB
Usable sensitivity
10 dB
Total harmonic distortion
0.3 %
COMPACT DISC PLAYER
Capacity
3 discs
Frequency range
20 Hz - 20 KHz (± 1 dB)
Signal/noise ratio
90 dB (at 1 KHz) with filter
Distortion
0.05 % (at 1 KHz)
Channel separation
74 dB
Disc sizes
Diameter: 120 or 80 mm. Thickness: 1.2 mm
TAPE DECK
Frequency range
125 Hz ~ 12 KHz
Signal/noise ratio
40 dB
Channel separation
35 dB
Erasing effect
60 dB
AMPLIFIER
Output power
FRONT (6Ω) .........................................2 x 60 Watts RMS (total harmonic distortion: 10 %)
CENTER (6Ω) .......................................30 Watts RMS (total harmonic distortion: 10 %)
SURROUND (6Ω) .................................2 x 30 Watts RMS (total harmonic distortion: 10 %)
Channel separation
50 dB
Signal/noise ratio
75 dB
GENERAL
Dimensions
270 (W) x 317 (H) x 340 (D) mm
45
THIS APPLIANCE IS MANUFACTURED BY:
ELECTRONICS
AH68-00531B
Download PDF