Samsung | SMT-1721P | Samsung SMT-1721P Benutzerhandbuch

TFT-LCD MONITOR
User Guide
SMT-1721 / SMT-1921
TFT-LCD MONITOR
SMT-1721 / SMT-1921
English
USER'S MANUAL
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR
COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER TO QUALIFIED
SERVICE PERSONNEL.
Graphic Symbol Explanation
The lightning flash with arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the
presence of uninsulated ‘dangerous
voltage’ within the product’s enclosure
that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating
and maintenance (servicing) instructions in the literature accompanying the
appliance.
Warning - To Prevent Fire or Shock Hazard,
Do Not Expose This Monitor To
Rain or Moisture.
1. Read Instructions : All the safety and operating instructions should be read before the appliance is operated.
2. Retain Instructions : The safety and operating instructions should be retained for future reference.
3. Heed Warnings : All warnings on the monitor and in the oper
ating instructions should be adhered to.
4. Follow Instructions : All operating and user instructions should be followed.
5. Cleaning : Unplug this monitor from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Exception. A monitor that is meant for uninterrupted service and that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose may exclude the refer
ence to unplugging the monitor in the cleaning description otherwise required in Item 5.
6. Attachments : Do not use attachments not recommended by Samsung as they may cause hazards.
7. Water and Moisture : Do not use this monitor near water for example, near a bathtub, wash bowl, kitchen sink or laun
dry tub, in a wet basement or near a swimming pool and the like wet basement or near a swimming pool and the like.
8. Accessories : Do not place this monitor on an unstable cart, stand, tripod, bracket or table. The monitor may fall, causing
serious injury to a child or adult and serious damage to the
appliance. Use only with a cart, stand, tripod. bracket or table
recommended by Samsung, or sold with the monitor. Any mounting of the monitor should follow Samsung’s instructions and should use a mounting accessory recommended by Samsung.
9. Ventilation : Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the monitor and to protect it from overheating and these openings should never be blocked by placing the monitor on a bed, sofa, rug or other similar surface. This monitor should never be placed near or over a radiator or heat register. This monitor should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or Samsung’s in
structions have been adhered to.
10.Installation : Do not install near any heat sources such as radiators, heat registers,stoves, or other appliances (including
amplifiers) that produce heat.
11.Power Sources : This monitor should be operated only from the type of power source indicated on the making label. If you are not sure of the type of power supply to your installation site, consult your Samsung dealer or local power company.
12.Grounding or Polarization : For monitors equipped with a 3-wire grounding-type plug having a third(grounding) pin. This plug will only fit into a grounding type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.
13.Power : Cord Protection-Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience recep
tacles, and the point where they exit from the monitor.
14.Lightning : For added protection for this monitor during a lightning storm or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable system. This will prevent damage to the monitor due to lightning and power-line surges.
15.Overloading : Do not overload wall outlets and extension cords as this can result in a risk of fire of electric shock.
16.Object and liquid Entry : Never push objects of any kind into this monitor through openings as they may touch dangerous voltage points or short-out parts that could
result in a fire or electric shock. Never spill liquid of any kind on the monitor.
17.Servicing : Do not attempt to service this monitor yourself as opening or removing cover may expose you to danger
ous voltage or other hazards. Refer all servicing to
quailfied service personnel.
--
18.Damage Requiring Service : Unplug this monitor from the wall outlet and refer servicing to qualified service
personnel under the following conditions.
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled or objects have fallen into the monitor.
c. If the monitor has been exposed to rain or water.
d. If the monitor does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper
adjustment of other controls may result in damage and require
extensive work by a qualified technician to restore the monitor
to its normal operation.
e. If the monitor has been dropped or the cabinet has been
damaged.
f. When the monitor exhibits a distinct change in performance-
this indicates a need for service.
19.Replacement Parts : When replacement parts are required,
be sure the service technician has used replacement parts
specified by Samsung or have the same characteristics as
the original parts.
Unauthorized substitutions may result in fire, electric shock or
other hazards.
20.Safety Check : Upon completion of any service or repairs to
this monitor, ask the service technician to preform safety
checks to determine that the monitor is in proper operating
condition.
NOTIICE
Hg (Within a circle) LAMP(S) INSIDE THIS
PRODUCT CONTAIN MERCURY AND BE
RECYCLED OR DISPOSED OF ACCORDING TO
LOCAL, STATE OR FEDERAL LAWS
For details see lamprecycle.org,eire.org,or call
1-1800-Samsung
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions : (1)
this device may not cause harmful interference and (2)
this device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.
If necessary, consult your dealer or an experienced radio/
television technician for additional suggestions.
You may find the booklet called how to Identify and Resolve
Radio/TV Interference Problems helpful.
This booklet was prepared by the Federal Communications
Commission.
It is available from the U.S. Government Printing Office,
Washington, DC 20402, Stock Number 004-000-00345-4.
IC Compliance Notice
This Class (A) digital apparatus meets all requirements of
the Canadian Interference-Causing Equipment Regulations.
Warning
This equipment has been tested and found to comply the
limits for a class A digital device, pursuant to part 15 of
the FCC Rules and ICES-003 of Industry Canada.
These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in
a commercial environment. This equipment generate, uses and
can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
User-Installer Caution
Your authority to operate this FCC verified equipment could
be voided if you make changes or modifications not expressly
approved by the party responsible for compliance to part 15 of
the FCC Rules.
Information
NOTE: This equipment has been tested and found tocomply
with the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in
a commercial environment.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will
be required to correct the interference at his own expense.
This Class A digital apparatus complies with Canadian
ICES-003.
Warning
This is a class A product. In a domestic environment this product
may cause radio interference in which case the user may be
required to take adequate measures.
CALIFORNIA USA ONLY
This perchlorate warning applies only to primary CR (Manganese
Dioxide) LIthium coin cells in the product sold or distributed
ONLY in California USA.
"Perchlorate Material - special handling may apply,
See www.dtsc.ca.gov/hazardouswaste/perchiorate."
to user
Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.
--
English
USER'S MANUAL
USER'S MANUAL
Contents
Important Safety Instructions.................................................................... 2
Unpacking................................................................................................. 5
Viewing the Control Panels....................................................................... 5
Front View........................................................................................................................ 5
Rear & Left Side View...................................................................................................... 6
Remote Controller..................................................................................... 7
Connecting to External Devices................................................................ 8
OSD Menu Configurations........................................................................ 9
No Signal Display............................................................................................................ 9
OSD Menu Selection....................................................................................................... 9
A. Input Menu.................................................................................................................. 9
B. Picture Menu............................................................................................................ 11
C. Sound Menu............................................................................................................ 14
D. Setup Menu............................................................................................................. 15
Specifications........................................................................................... 17
--
USER'S MANUAL
Unpacking
English
Remove the package cover and place the product on a flat and secure surface or in the installation location.
Check whether all the following devices and accessories are included with the main system.
TFT-LCD
MONITOR
REMOTE &
BATTERIES
VGA SIGNAL
CABLE
POWER CORD
USER’S MANUAL
USER’S MANUAL
CD
Viewing the Control Panels
Front View

 
    
 / PIP
Increases the level of active function, and selects OSD menu. Also, Activates PIP function in the VGA Mode.
IR Sensor
Remote controller sensor.
MENU
Activates and exits the On Screen Display.
ENTER / SOURCE
Selects input source, activates a highlighted menu item.
- +
 : Moves the OSD menu or increases
the volume level.
Moves the OSD menu or decreases
 :
the volume level.
 / FREEZE/AUTO
Decrease the level of active function and move to the previous menu.
Still picture function in Video mode when there is no OSD menu on the screen.
Also, activates Auto adjustment function in the VGA mode when you press the Auto button with the OSD Menu off.
 (POWER) ON/OFF
Turns the power on or off.
There will be a few seconds delay before the
display appears.
The power LED lights with blue when the power is turned on. The power is turned off by pressing the power switch again and the power LED goes off.
Speaker
--
USER'S MANUAL
Rear & Left Side View
Left Side View

Rear View

   


Rear View
Left Side View
AC IN
AC power input.
AUDIO-B
Audio-B input : Right (RED), Left (White)
VIDEO-A IN
Composite signal input for VIDEO A.
AUDIO-A/S-VIDEO
Audio-A (S-Video) input : Right (RED), Left (White)
VIDEO-A OUT
Video looping output for VIDEO A.
VIDEO-B IN
Composite signal input for VIDEO B.
VIDEO-B OUT
Video looping output for VIDEO B.
S-VIDEO IN
Y/C separated signal input.
S-VIDEO OUT
Y/C separated signal looping output.
VGA
VGA signal input
--
USER'S MANUAL
POWER
Turns the Power On or Off.
There will be a few seconds delay before display
appears.
Number button
Changes the SYSTEM ID for remote controller.
With the SYSTEM ID button pressed, entered the desired NUMBER by pressing the corresponding button(0~9) to set up the Remote Controller ID
ID RESET
Resets 01(default value) for the remote control ID.
VOLUME +, Adjusts the audio volume.
MUTE
Press to mute the sound temporarily.
Displayed on the bottom left of the screen.
Press the MUTE button again to cancel the Mute function.Alternatively press the - or + button to cancel the Mute function.
UNDER SCAN
Displays the entire video signal on the screen.
MENU
Open the on-screen menu and exit from the menu screen or close screen adjustment menu.
ENTER
Activates a highlighted menu item.
SYSTEM ID
Setting the SYSTEM ID of remote controller.
Refer to
Number button.
PIP - Available in VGA Mode
Push the PIP button to turn PIP screen On/Off.
P.MODE - Available in Video A/B, S-Video Mode
Press to select a pre-defined Picture Mode of the
monitor or to change the picture atmosphere as
required. When you press this button, current mode is displayed on the lower center of the screen.
The monitor has four auto matic picture settings that are preset at the factory. Then push button again to circle through available reconfigured modes.
( Dynamic, Standard, Movie, Custom )
FREEZE - Available in Video A/B, S-Video Mode
Press the button once to freeze the screen. Press it again to unfreeze.
AUTO - Available In VGA mode Only
Adjusts the screen display automatically.
SOURCE
Press the 'SOURCE' button to change the input signal source.
Changing the source is allowed only in external devices that are connected to the monitor at the time.
/ buttons
Moves from one menu item to another horizontally, vertically or adjusts selected menu values.
--
English
Remote Controller
USER'S MANUAL
Connecting to External Devices.
The product can be connected to an external device such as Camera, DVR,VCR, External Monitor, etc.
CAMERA
DVR
External MONITOR
VCR
--
USER'S MANUAL
OSD Menu Configurations
When there is no connection at the VGA and Video
input, the On Screen Display will show this message.
No Signal
1.
2.
3.
Press the MENU and ENTER button.
Press the ENTER or  button and then /
button to select input menu.
Press the ENTER or button to save the setting and exit.
 PIP ON (VGA mode only)
<Video mode>
PIP
Source
Size Position
: Off
: S-video
:
:
PIP




Check signal cable.
VGA
<VGA mode>
Move
Enter
Return
If you didn't select VGA input, this menu is not
available.
OSD Menu Selection
1. Press the MENU button to see the main menu.
2. Press / and ENTER button to select the main menu.
3. Press / and ENTER (or  ) button to select the sub menu.
4. Press / and ENTER (or  ) button to select setting. (Or press / button to select setting)
5. Press the MENU or  button repeatedly to exit.
1. Press the MENU and ENTER button.
2. Press the / and ENTER button to select the PIP menu.
3. Press the ENTER or  button to see the sub menu.
4. Press the / and ENTER button to select On.
5. Press the MENU or  button repeatedly to exit.
 PIP Source select (VGA mode only)
PIP
NOTE1: Press the MENU or  button to return to the previous screen.
Video A
Video B
S-Video
NOTE2: The OSD display will be disapear after 2 minutes if there is no button input.
A. Input Menu
Source List : Video A
PIP Edit Name Move
Enter
Move
Enter
Return
If you didn't select PIP On, this menu is not available.
Input



Exit
1.
2.
3.
4.
5.
--
Press the MENU and ENTER button.
Press the / and ENTER button to select the PIP menu.
Press the / and ENTER button to select the Source.
Press the / and ENTER button to select
desired PIP source.
Press the MENU or  button repeatedly to exit.
English
Inputs can be set to Video A, Video B, S-Video, VGA
mode.
No Signal Display
USER'S MANUAL
 PIP Size select (VGA mode only)
PIP
Source
Size Position
Move
: Off
: S-video
:
:
Enter
PIP




Return
If you didn't select PIP On, this menu is not available.
1.
2.
3.
4.
5.
If you didn't select VGA input, this menu is not available.
1.
2.
3.
4.
5.
Press the MENU and ENTER button.
Press the / and ENTER button to select the PIP menu.
Press the ENTER or  button to see sub menu.
Press the / and ENTER button to select the Off.
Press the MENU or  button repeatedly to exit.
 Edit Name
Press the MENU and ENTER button.
Press the / and ENTER button to select the PIP menu.
Press the / and ENTER button to select the Size.
Press the / and ENTER button to select
setting. (
or
)
Press the MENU or  button repeatedly to exit.
Source List
: Video A
PIP Edit Name Move
Enter
 PIP Position select (VGA mode only)
PIP
Source
Size Position
: Off
: S-video
:
:
Move
Enter
Press the MENU and ENTER button.
Press the / and ENTER button to select the PIP menu.
Press the / and ENTER button to select the Position.
Press the / and ENTER button to select
setting. (
,
,
,
)
Press the MENU or  button repeatedly to exit.
 PIP OFF (VGA mode only)
PIP
Source
Size Position
Move
: Off
: S-video
:
:
Enter
Enter
PIP




Return
Edit Name
Return
---CAMERA
DVR
VCR
DVD
Cable STB
AV Receiver
DVD Receiver
If you didn't select PIP On, this menu is not available
1.
2.
3.
4.
5.
Move
Exit
Edit Name
: Cable STB

: - - - -

: DVD Receive 
: VGA

Video A
Video B
S-Video
VGA
PIP




Input



1.
2.
3.
4.
5.
Return
- 10 -
Move
Enter
Return
Press the MENU and ENTER button.
Press the / and ENTER button to select the Edit menu.
Press the / and ENTER button to select input.
Press the / and ENTER button to select the Name you want.
Press the MENU or  button repeatedly to exit.
USER'S MANUAL
 Custom
B. Picture Menu
VGA mode : Contrast, Brightness
Video mode
 Mode : Dynamic, Standard, Movie, Custom
Mode : Movie
Custom Color Tone
: Warm2
Size
: 4:3
Under Scan
: Under
Move
Enter
Picture





Exit
Mode
1.
2.
3.
4.
5.
Move
Enter
Return
Press the MENU and / button to select the
Picture menu.
Press the ENTER or  button to select the Mode menu.
Press the ENTER or  button.
Press the / button to select the mode you want. (Dynamic, Standard, Movie,Custom )
Press the MENU or  button repeatedly to exit.
 Custom
Video mode : Contrast, Brightness,
Sharpness, Color
 Tint feature is enabled while input signal is NTSC
mode.
Move
Enter
Return
Return
1. Press the MENU and / button to select the Picture menu.
2. Press the ENTER or  button to select the Custom menu. (Press / button to select the custom
- Video mode)
3. Press the ENTER or  button to see the sub menu.
4. Press the / and ENTER button to select the setting you want.
5. Press the / and the ENTER button to adjust the setting value and save.
6. Press the / button to select the Contrast or Brightness.
7. Press the / and ENTER button to adjust the
setting value and save.
8. Press the MENU or  button repeatedly to exit.
If you select the Brightness, then the picture below appears on the screen.

Brightness

80
 Color Tone
Video mode : Cool2, Cool1, Normal, Warm1, Warm2
 Tint feature is enabled while input signal is NTSC
mode.
Custom
Contrast 50
Brightness 55
Sharpness25
Color 40
Enter
<VGA mode>
Dynamic
Standard
Movie
Custom
Move
Clor Tone
Cool2
Cool1
Normal
Warm1
Warm2
<Video mode>
Move
Enter
<Video mode>
- 11 -
Return
English
Custom
Contrast 81
Brightness 100
USER'S MANUAL
 Color Tone
VGA mode : Cool, Normal, Warm, Custom
 Under Scan : Over, Under
Mode : Movie
Custom Color Tone
: Warm2
Size
: 4:3
Under Scan
: Under
Clor Tone
Cool
Normal
Warm
Custom
Move
Enter
 Size : Zoom, 4:3
Move
Enter
Picture





Exit
Size
Zoom
4:3
Move
Enter
Size
Move
Enter
Return
The menu is not available if you select the Zoom,
Picture Size.
1. Press the MENU and / button to select the
Picture menu.
2. Press the ENTER or  button.
3. Press the / button to select the Under Scan menu.
4. Press the ENTER or  button.
5. Press the / button to select the scan mode you want.
6. Press the MENU or  button repeatedly to exit.
VGA mode
 Color Control : Red, Green, Blue
Custom Color Tone
: Normal
Color Control
Image Lock
Auto Adjustment
PIP Picture
Return
The menu is available only if you select the over,
Under Scan.
1.
2.
3.
4.
5.
6.
Exit
Over
Under
Press the MENU and / button to select the
Picture menu.
Press the ENTER button.
Press the / and ENTER button button to select the Color Tone menu.
Press the / button to select the setting you want.
Press the MENU or  button repeatedly to exit.
Mode : Movie
Custom Color Tone
: Warm2
Size
: 4:3
Under Scan
: Under
Enter
Return
<VGA mode>
1.
2.
3.
4.
5.
Move
Picture





Move
Enter
Picture






Exit
Color Control
Red 50
Green 50
Blue 50
Press the MENU and / button to select the
Picture menu.
Press the ENTER or  button.
Press the / and ENTER button to select the Size menu.
Press the ENTER or  button.
Press the / button to select the Size you want.
Press the MENU or  button repeatedly to exit.
- 12 -
Move
Enter
Return
USER'S MANUAL
Press the MENU and / button to select the
Picture menu.
Press the ENTER or  button.
Press the / and ENTER button to select the Color control menu.
Press the / button to select the setting you want.
Press the / and the ENTER button to adjust the setting value and save.
Press the / button to select the Red, Green or Blue.
Press the / and ENTER button to adjust the
setting value and save.
Press the MENU or  button repeatedly to exit.
 Image lock
Custom Color Tone
: Normal
Color Control
Image Lock
Auto Adjustment
PIP Picture
Move
Enter
Picture






1.
2.
3.
4.
5.
6.
7.
8.
Move
Enter
Position




1.
2.
3.
4.
5.
6.
Move
Enter
Return
Press the MENU and / button to select the
Picture menu.
Press the ENTER or  button.
Press the / and ENTER button to select the Image Lock menu.
Press the / and ENTER button to select the
Position .
Press the / or / button to adjust the Position.
Press the MENU or  button repeatedly to exit.
 Auto Adjustment
If you didn't select VGA input, this menu is not available.
Exit
Image Lack
Coarse
1312
Fine 77
Sharpness 53
Position 
 Position (Image Lock)
1.
2.
3.
Press the MENU and / button to select the
Picture menu.
Press the ENTER or  button.
Press the / and ENTER button to select Auto Adjustment menu.
The picture below will appear on the screen.
Return
Press the MENU and / button to select the
Picture menu.
Press the ENTER or  button.
Press the / and ENTER button to select the Image Lock menu.
Press the / button to select the sub menu you want. ( Coarse, Fine or Sharpness )
Press the / and the ENTER button to adjust the setting value.
Press the / button to select the Coarse, Fine or Sharpness.
Press the / and ENTER button to adjust the
setting value.
Press the MENU or  button repeatedly to exit.
Auto Adjustment
Please Wait.
4. Press the MENU or  button repeatedly to exit.
 PIP Picture : Contrast, Brightness,
Sharpness, Color
 Tint feature is enabled while input signal is NTSC
mode.
PIP Picture
Contrast 100
Brightness 45
Sharpness 75
Color 55
- 13 -
Move
Enter
Return
English
1.
2.
3.
4.
5.
6.
7.
8.
USER'S MANUAL
 Custom : Bass, Treble, Balance
If you select PIP Off, this menu is not available.
1.
2.
3.
4.
5.
6.
7.
8.
Press the MENU and / button to select the
Picture menu.
Press the ENTER or  button.
Press the / and ENTER button to select the
PIP Picture menu.
Press the / button to select the sub menu you want.
( Contrast, Brightness, Sharpness, Color,)
Press the / button to adjust the setting value and save.
Press the / button to select the other menu.
Press the / button to adjust the setting value and save.
Press the MENU or  button repeatedly to exit.
Mode : Movie
Custom  Mode : Standard, Music, Movie, Speech, Mode : Movie
Custom Move
Enter
Sound


Exit
1.
2.
3.
4.
5.
6.
7.
8.
Mode
Standard
Music
Movie
Speech
Custom
1.
2.
3.
4.
5.
Move
Enter
Enter
Exit
Custom
Bass 92
Treble 60
Balance L 50
R 50
C. Sound Menu
Custom
Move
Sound


Return
Press the MENU and / button to select the
Sound menu.
Press the ENTER or  button.
Press the ENTER or  button to select the Mode.
Press the / and ENTER button to select the setting you want.
Press the MENU or  button repeatedly to exit.
- 14 -
Move
Enter
Return
Press the MENU and / button to select the
Sound menu.
Press the ENTER or  button.
Press the / and ENTER button to select the
Custom.
Press the / button to select the sub menu you want.
( Bass, Treble, Balance )
Press the / button to adjust the setting value and save.
Press the / button to select the other menu.
Press the / button to adjust the setting value.
Press the MENU or  button repeatedly to exit.
USER'S MANUAL
 Language
Language
: English
Transparancy : Medium
System ID
: 0
Blue Screen
: On
Reset
Move
Enter
Setup





Exit
1.
2.
3.
4.
5.
Press the MENU and / button to select the
Setup menu.
Press the ENTER or  button.
Press the / and ENTER button to select the Transparency.
Press the / and ENTER button to select the setting you want.
Press the MENU or  button repeatedly to exit.
 System ID : 0 ~9
Language
System ID
English
Deutsch
Francais
Espanol
Italiano
Svenska
Portugues
1.
2.
3.
4.
5.
Move
Enter
Return
Press the MENU and / button to select the
Setup menu.
Press the ENTER or  button.
Press the / and ENTER button to select the Language.
Press the / and ENTER button to select the setting you want.
Press the MENU or  button repeatedly to exit.
 Transparency : High, Medium, Low, 0
1
2
3
4
5
6
Opaque
1.
2.
3.
4.
5.
Move
Enter
Language
: English
Transparancy : Medium
System ID
: 0
Blue Screen
: On
Reset
Exit
Enter
Move
Enter
Setup





Exit
Blue Screen
Off
On
High
Medium
Low
Opaque
Move
Return
 Blue Screen : On, Off
Transparency
Enter
Press the MENU and / button to select the
Setup menu.
Press the ENTER or  button.
Press the / and ENTER button to select the System ID.
Press the / and ENTER button to select the setting you want. (0~9)
Press the MENU or  button repeatedly to exit.
Setup
Language
: English

Transparancy : Medium

System ID
: 0

Blue Screen
: On

Reset

Move
Return
- 15 -
Move
Enter
Return
English
D. Setup Menu
USER'S MANUAL
1.
2.
3.
4.
5.
Press the MENU and / button to select the
Setup menu.
Press the ENTER or  button.
Press the / and ENTER button to select the the Blue Screen.
Press the / and ENTER button to select the setting you want.
Press the MENU or  button repeatedly to exit.
 Reset : Image, Color - VGA mode only
Language
: English
Transparancy : Medium
System ID
: 0
Blue Screen
: On
Reset
Move
Enter
Setup





Exit
Reset
Image Reset
Color Reset
Move
Enter
Return
If you didn't select VGA input, this menu is not
available.
1.
2.
3.
4.
Press the MENU and / button to select the
Setup menu.
Press the ENTER or  button.
Press the / and ENTER button to select the Reset.
Press the / and ENTER button to select the setting you want.
Image Reset
Cancel
OK
Move
Enter
Return
5. Press the / and ENTER button to selelct the OK or Cancel.
6. Press the MENU or  button repeatedly to exit.
- 16 -
USER'S MANUAL
Specifications
Model Name
SMT-1721
Sales Area
Broadcasting System
Picture
Video
S-Video
VGA
Audio
HAS Stand
Language
Lift
Tilt
Swivel
Net
Dimensions(WxDxH)
Weight
Electric
Performance
Net Weight
Power Supply
Power Consumption
17"
19"
1280 X 1024
0.264mm(H) x 0.264mm(V) 0.294mm(H) x 0.294mm(V)
Progressive
NTSC 3.58/PAL
4:3
Yes
Yes
Yes
Yes
Yes
2ch input, 1.0Vp-p, 75Ω terminated, Loop Through out,
BNC Type
1ch input(Y/C), Loop Through out
1ch input
2Channel input, 2W Stereo, RCA Type
11 Language (Eng/Fre/Ger/Spa/Ita/Rus/Swe/Por/Kor/Chn/
Jpn)
0 ~ 100mm
-5 ~ -25˚
-165˚ ~ +165˚
371mm x 220mm x 367.6mm 412mm x 220mm x 398mm
(Lowest)
(Lowest)
371mm x 220mm x 467.6mm 412mm x 220mm x 498mm
(Hightest)
(Hightest)
5.95Kg
6.85Kg
100 ~ 260V
100 ~ 260V
42W
42W
- 17 -
English
Inch
Resolution (HxV)
Pixel Pitch(mm)
Scan System
Color System
Screen Mode
2D Comb Filter
Noise Reduction
PIP
Freeze
Under Scan
Composite
Panel
OSD
SMT-1921
World Wide
NTSC/PAL System
AB68-00651A-01
Download PDF

advertising