Samsung | HT-H7750WM | Samsung Blu-ray Home Entertainment System H7750 Benutzerhandbuch

HT-H7500WM
HT-H7750WM
Blu-ray™
Home Entertainment System
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
This Nanum Gothic Eco font is provided by NAVER.
Safety Information
This symbol indicates that high voltage
is present inside. It is dangerous to
make any kind of contact with any
internal part of this product.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE THE COVER (OR BACK). THERE ARE NO
USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO
QUALIFIED PERSONNEL.
~~ The slots and openings in the cabinet and in
the back or bottom are provided for necessary
ventilation. To ensure reliable operation of this
apparatus, and to protect it from overheating,
these slots and openings must never be blocked or
covered.
-- Do not place this apparatus in a confined space,
such as a bookcase, or built-in cabinet, unless
proper ventilation is provided.
-- Do not place this apparatus near or over a
radiator or heat register, or where it is exposed
to direct sunlight.
-- Do not place vessels (vases etc.) containing
water on this apparatus. A water spill can cause
a fire or electric shock.
~~ Do not expose this apparatus to rain or place it
near water (near a bathtub, washbowl, kitchen
sink, or laundry tub, in a wet basement, or near a
swimming pool, etc.). If this apparatus accidentally
gets wet, unplug it and contact an authorized
dealer immediately.
~~ This apparatus uses batteries. In your community,
there might be environmental regulations that
require you to dispose of these batteries properly.
Please contact your local authorities for disposal or
recycling information.
~~ Do not overload wall outlets, extension cords or
adaptors beyond their capacity, since this can result
in fire or electric shock.
~~ Route power-supply cords so that they are not
likely to be walked on or pinched by items placed
on or against them. Pay particular attention to
cords at the plug end, at wall outlets, and the point
where they exit from the apparatus.
~~ To protect this apparatus from a lightning storm,
or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will
prevent damage to the set due to lightning and
power line surges.
~~ Before connecting the AC power cord to the DC
adaptor outlet, make sure the voltage designation
of the DC adaptor corresponds to the local
electrical supply.
This symbol indicates that important
literature concerning operation and
maintenance has been included with
this product.
~~ Never insert anything metallic into the open parts
of this apparatus. Doing so may create a danger of
electric shock.
~~ To avoid electric shock, never touch the inside of
this apparatus. Only a qualified technician should
open this apparatus.
~~ Make sure to plug the power cord in until it is
firmly seated. When unplugging the power cord
from a wall outlet, always pull on the power cord's
plug. Never unplug by pulling on the power cord.
Do not touch the power cord with wet hands.
~~ If this apparatus does not operate normally - in
particular, if there are any unusual sounds or smells
coming from it - unplug it immediately and contact
an authorized dealer or service centre.
~~ Maintenance of Cabinet.
-- Before connecting other components to this
product, be sure to turn them off.
-- If you move your product suddenly from a cold
place to a warm place, condensation may occur
on the operating parts and lens and cause
abnormal disc playback. If this occurs, unplug the
product, wait for two hours, and then connect
the plug to the power outlet. Then, insert the
disc, and try to play back again.
~~ Be sure to pull the power plug out of the outlet
if the product is to remain unused or if you are
leaving the house for an extended period of time
(especially when children, elderly, or disabled
people will be left alone in the house).
-- Accumulated dust can cause an electric shock,
an electric leakage, or a fire by causing the
power cord to generate sparks and heat or the
insulation to deteriorate.
~~ Contact an authorized service centre for
information if you intend to install your product
in a location with heavy dust, high or low
temperatures, high humidity, chemical substances,
or where it will operate 24 hours a day such as in
an airport, a train station, etc. Failing to do so may
lead to serious damage of your product.
2 - English
WARNING :
~~ TO PREVENT THE SPREAD OF FIRE,
KEEP CANDLES AND OTHER ITEMS
WITH OPEN FLAMES AWAY FROM
THIS PRODUCT AT ALL TIMES.
CLASS 1 LASER product
This product is classified as a CLASS 1 LASER product.
Use of controls, adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
CAUTION :
~~ INVISIBLE LASER RADIATION WHEN OPEN AND
INTERLOCKS DEFEATED, AVOID EXPOSURE TO
BEAM.
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1 PRODUCTO
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
LÁSER CLASE 1
3D Precautions
IMPORTANT HEALTH AND SAFETY INFORMATION
FOR 3D PICTURES.
Read and understand the following safety
information before using the 3D function.
~~ Some viewers may experience discomfort while
viewing 3D TV such as dizziness, nausea, and
headaches.
If you experience any such symptom, stop viewing
3D TV, remove the 3D Active Glasses, and rest.
~~ Watching 3D images for an extended period of
time may cause eye strain. If you feel eye strain,
stop viewing 3D TV, remove your 3D Active
Glasses, and rest.
~~ A responsible adult should frequently check on
children who are using the 3D function.
If there are any reports of tired eyes, headaches,
dizziness, or nausea, have the child stop viewing
3D TV and rest.
~~ Do not use the 3D Active Glasses for other
purposes (such as general eyeglasses, sunglasses,
protective goggles, etc.)
~~ Do not use the 3D function or 3D Active Glasses
while walking or moving around. Using the 3D
function or 3D Active Glasses while moving around
may cause you to bump into objects, trip, and/or
fall, and cause serious injury.
~~ If you want to enjoy 3D content, connect a 3D
device (3D compliant AV receiver or TV) to the
product’s HDMI OUT port using a high-speed HDMI
cable. Put on 3D glasses before playing the 3D
content.
~~ The product outputs 3D signals only through an
HDMI cable connected to the HDMI OUT port.
~~ The video resolution in 3D play mode is fixed to
the resolution of the original 3D video. You can not
change the resolution.
~~ Some functions such as BD Wise, screen size
adjustment, and resolution adjustment may not
operate properly in 3D play mode.
~~ You must use a high-speed HDMI cable for proper
output of the 3D signal.
~~ Stay at least three times the width of the screen
from the TV when watching 3D images. For
example, if you have a 46 inch screen, stay 3.5
meters from the screen.
~~ Place the 3D video screen at eye level for the best
3D picture.
~~ When the product is connected to some 3D
devices, the 3D effect may not function properly.
~~ This product does not convert 2D content into 3D.
~~ "Blu-ray 3D" and "Blu-ray 3D" logo are trademarks
of the Blu-ray Disc Association.
3 - English
Safety Information
~~ Use only a properly grounded plug and wall outlet.
-- An improper ground may cause electric shock or
equipment damage. (Class l Equipment only.)
~~ To turn this apparatus off completely, you must
disconnect it from the wall outlet. Consequently,
the wall outlet and power plug must be readily
accessible at all times.
~~ Do not allow children to hang on the product.
~~ Store the accessories (battery, etc.) in a location
safely out of the reach of children.
~~ Do not install the product in an unstable location
such as a shaky self, a slanted floor, or a location
exposed to vibration.
~~ Do not drop or strike the product. If the product is
damaged, disconnect the power cord and contact
a service centre.
~~ To clean this apparatus, unplug the power cord
from the wall outlet and wipe the product using
a soft, dry cloth. Do not use any chemicals such
as wax, benzene, alcohol, thinners, insecticide,
air fresheners, lubricants, or detergent. These
chemicals can damage the appearance of the
product or erase the printing on the product.
~~ Do not expose this apparatus to dripping or
splashing. Do not put objects filled with liquids,
such as vases on the apparatus.
~~ Do not dispose of batteries in a fire.
~~ Do not plug multiple electric devices into the same
wall socket. Overloading a socket can cause it to
overheat, resulting in a fire.
~~ There is danger of an explosion if you replace
the batteries used in the remote with the wrong
type of battery. Replace only with the same or
equivalent type.
Contents
Getting Started
5
Accessories
5
Speaker Components
6
Front Panel
7
Rear Panel
8
Remote Control
9
Connecting the Speakers
Playing Content
27
27
29
32
37
40
41
42
Connections
12 Attaching the Toroidal Ferrite Core to the
Power Cord of the Wireless Receiver Module
(SWA-6000)
13 Connecting to a TV and External Devices
14 Connecting to a Network Router
Settings
15 The Initial Settings Procedure
15 The Home Screen at a Glance
16 Accessing the Settings Screen
16 Settings Menu Functions
22 Network Setup
24 Wi-Fi Direct
Playing Commercial Discs
Playing Multimedia Files
Controlling Video Playback
Controlling Music Playback
Using Bluetooth
Playing Photo Contents
Listening to the Radio
Using the Special Effects Remote Control
Buttons
Network Services
43 Logging In to Your Samsung Account
43 Adding a Credit Card
43 Before Using FILMS AND TV SHOWS or
SAMSUNG APPS
44 Using FILMS AND TV SHOWS
45 Using SAMSUNG APPS
47 Screen Mirroring
47 Using the Web Browser
50 Linking your Internet Service Accounts to the
Product
50 BD-LIVE™
25 Upgrading Software
Appendix
51
52
59
62
64
Additional Information
Disk and Format Compatibility
Troubleshooting
Specifications
Licences
Wiring the Main Power Supply Plug (UK Only)
IMPORTANT NOTICE : The mains lead on this equipment is supplied with a moulded plug incorporating
a fuse. The value of the fuse is indicated on the pin face of the plug and if it requires replacing, a fuse
approved to BS1362 of the same rating must be used. Never use the plug with the fuse cover removed. If
the cover is detachable and a replacement is required, it must be of the same colour as the fuse fitted in
the plug. Replacement covers are available from your dealer. If the fitted plug is not suitable for the power
points in your house or the cable is not long enough to reach a power point, you should obtain a suitable
safety approved extension lead or consult your dealer for assistance. However, if there is no alternative to
cutting off the plug, remove the fuse and then safely dispose of the plug. Do not connect the plug to a
mains socket as there is a risk of shock hazard from the bared flexible cord. Never attempt to insert bare
wires directly into a mains socket. A plug and fuse must be used at all times.
IMPORTANT : The wires in the mains lead are coloured in accordance with the following code:– BLUE =
NEUTRAL BROWN = LIVE As these colours may not correspond to the coloured markings identifying the
terminals in your plug, proceed as follows:–The wire coloured BLUE must be connected to the terminal
marked with the letter N or coloured BLUE or BLACK. The wire coloured BROWN must be connected to the
terminal marked with the letter L or coloured BROWN or RED.
IMPORTANT : DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH LETTER
E OR BY THE EARTH SYMBOL U, OR COLOURED GREEN OR GREEN AND YELLOW.
4 - English
Getting Started
Check the box for the accessories and speaker components listed or shown below.
Accessories
~~ Remote Control
~~ Lithium Battery
~~ User Manual
(For Power cord)
Power Cable
FM Antenna
Toroidal Ferrite Core
Soft Cloth
WARNING, DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD,
[The remote control supplied with] This product contains a coin/button cell battery.
If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and
can lead to death. Keep new and used batteries away from children. If the battery compartment does
not close securely, stop using the product and keep it away from children. If you think batteries might
have been swallowed or placed inside any part of the body, seek immediate medical attention.
Speaker Components
HT-H7500WM - 5.1CH
Centre
Front x 2
Surround x 2
Speaker Cable x 6
5 - English
Subwoofer
Wireless Receiver
Module (SWA-6000)
Getting Started
`` Figures and illustrations in this User Manual are provided for reference only and may differ from
actual product appearance.
`` An administration fee may be charged if either
a.an engineer is called out at your request and there is no defect in the product (i.e. where you
have failed to read this user manual)
b.you bring the unit to a repair centre and there is no defect in the product (i.e. where you have
failed to read this user manual).
`` The amount of such administration charge will be advised to you before any work or home visit is
carried out.
Getting Started
HT-H7750WM - 7.1CH
Speaker Cable x 2
Screw (5x20) x 16
Stand Base x 4
D
H-EN
HIG
D
H-EN
HIG
Front/
Front Top x 2
VACUUM TUBE SO
UND
Stand x 4
Centre
VACUUM TUBE SO
UND
UBE S
ACTUU
BM
E STO
D VACU
DUVM
UND OUND
H-EN H-EN
HIG HIG
D
H-EN
HIG
D
H-EN
HIG
VACUUM TUBE SO
UND
D
H-EN
HIG
VACUUM TUBE SO
UND
VACUUM TUBE SO
UND
Surround x 2
Subwoofer
Wireless Receiver
Module (SWA-6000)
Front Panel
DISPLAY ICONS
FUNCTION
STOP
OPEN/CLOSE
VOLUME
CONTROL
5V 0.5A
5V 0.5A
PLAY/PAUSE
POWER
VACUUM TUBE AMP
D
H-EN
HIG
VACUUM TUBE SO
UND
5V 0.5A
NFC
5V 0.5A
5V 0.5A
5V 0.5A
5V 0.5A
DISPLAY
5V 0.5A
DISC TRAY
REMOTE CONTROL SENSOR
USB
✎✎ Cellular phones or mobile devices placed near the vacuum tube amp or electronic products placed on
the top of the product can cause audio noise or distortion.
✎✎ When the product is on, do not let children touch the product's surface. It will be hot.
✎✎ To upgrade the product's software through the USB jack, you must use a USB flash drive.
6 - English
✎✎ When the product displays a Blu-ray Disc menu, you cannot start the movie by pressing the
Rear Panel
FRONT
R
SUBWOOFER
FRONT
IMPEDANCE : 3Ω
SPEAKERS OUT
L
CENTER
* In case of HT-H7500WM
HDMI OUT
HDMI IN
COOLING FAN
AUX IN
* FM ANTENNA
FRONT TOP
FRONT
R
R
SUBWOOFER
FRONT TOP
FRONT
L
LAN
CENTER
SPEAKERS OUT
POWER CORD
L
IMPEDANCE : 3Ω
AUX IN
POWER
HDMI OUT
1
SPEAKER OUTPUT
CONNECTORS
HDMI IN
2
LAN TERMINAL
FM ANT
L
R
OPTICAL
DIGITAL
AUDIO IN
EXTERNAL DIGITAL
AUDIO IN (OPTICAL)
* Connecting the FM Antenna
1. Connect the supplied FM antenna to the FM ANT Jack.
2. Slowly move the antenna wire around until you find a location where reception is good, then fasten
it to a wall or other rigid surface.
✎✎ Maintain a minimum of 10 cm of clear space on all sides of the home cinema to ensure adequate
ventilation. Do not obstruct the cooling fan or ventilation holes.
✎✎ This product does not receive AM broadcasts.
7 - English
Getting Started
button on the product or the remote. To play the movie, you must select Play Movie or Start in the
disc menu, and then press the OK button.
5V 0.5A the home
✎✎ If you are using the Internet or are playing content from a USB device on your TV through
cinema, you cannot select the BD/DVD mode with the SOURCE button. To select the BD/DVD mode,
exit the Internet or stop the content you are playing on the TV, and then select the BD/DVD mode.
✎✎ To use the NFC function, tag the compatible Bluetooth source device to the N on the top of the
product (See page 39).
Getting Started
Remote Control
Tour of the Remote Control
Press to open and close the disc tray.
Turn the product on and off.
Press to select the Home Cinema's
mode (HDMI, AUX, BD/DVD, etc.).
Adjust the volume.
Cut off the sound temporarily.
Press to skip backwards([) or
forwards(])
or
Press and hold to search
backwards(() or forwards()).
Press to play disc or files.
or
Press to pause playing.
Press to use the Tools menu.
or
To display the number keypad
(may include function keys when
applicable) on the screen, press and
hold the button.
Press to move to the Home screen.
Select on-screen menu items and
change menu values.
,. : Search for active FM stations
and to change channels.
Press to stop the disc playing or to
exist the menu.
Return to the previous menu.
Use to enter the Popup menu/Title
menu.
Press to view the disc menu.
Press to apply sound effects.
Use to display the playback information
when playing a Blu-ray/DVD disc or files.
Press to apply the DTS Neo:Fusion II
or 3D sound effect.
Set a Sleep time to shut off the product.
Select STEREO or MONO for radio
broadcasts.
These buttons are used both for
menus on the product and also
several Blu-ray Disc functions.
Press to select MANUAL/PRESET in
the Tuner function.
Use to set a preset radio
frequency.
✎✎ While playing multimedia content in SAMSUNG APPS, press and hold 5 button on the remote to
pause playback. To stop playback, press and hold e (EXIT) button on the remote.
Installing batteries in the Remote Control
1
Use a coin to turn the remote
control cover anti-clockwise to
remove it as shown in the figure
above.
2
3
Insert a 3V lithium battery. Keep
the positive (+) pole upward
when inserting the battery. Put
the battery cover on and align
the '●' marks side by side as
shown in the figure above.
8 - English
Use a coin to turn the cover
clockwise as far as it will go to
fix it in place.
Connections
This section describes various methods of connecting the product to other external components.
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Connecting the Speakers
Subwoofer
Centre
Subwoofer
Front (R)
Surround (R)
* HT-H7500WM
Surround (R)
Front/
Front Top (L)
Front (L)
Surround (L)
Product
Front/
Front Top (R)
Wireless
Receiver Module
Surround (L)
Wireless
Receiver Module
* HT-H7750WM
Position of the product
Place it on a stand or cabinet shelf, or under the TV stand.
Selecting the Listening Position
The listening position should be located about 2.5 to 3 times the TV's screen size away from the TV.
For example, if you have a 46 inch screen, locate the listening position 2.92 to 3.50 meters from the
screen.
HT-H7500WM :
Front Speakers
Place these speakers in front of your listening position, facing inwards
(about 45°) toward you. Place the front speakers so that their tweeters
will be at the same height as your ear. Align the front face of the front
speakers with the front face of the centre speaker or place them slightly in
front of the centre speakers.
HT-H7750WM :
Front/Front Top
Speakers
Place these speakers in front of your listening position, facing inwards
(about 45°) toward you. Place the front speakers so that their tweeters will
be at the same height as your ear. Align the front face of the front/front
top speakers with the front face of the centre speaker or place them
slightly in front of the centre speakers.
HT-H7500WM :
Centre Speaker
It is best to install the Centre Speaker at the same height as the front
speakers. You can also install it directly over or under the TV.
HT-H7750WM :
Centre Speaker
It is best to install the Centre Speaker at the same height as the front/front
top speakers. You can also install it directly over or under the TV.
9 - English
Connections
Product
Centre
Connections
Surround Speakers
Place these speakers to the side of your listening position. If there isn't
enough room, place these speakers so they face each other. Position them
about 60 to 90cm above your ear, facing slightly downward.
* Unlike the front and centre speakers, the surround speakers are used
mainly for sound effects. Sound will not come from them all the time.
Subwoofer
The position of the subwoofer is not so critical. Place it anywhere you like.
*Surround speakers must be connected to the wireless receiver module.
*The appearance of your speakers may differ from the illustrations in this manual.
*Each speaker has a coloured label on its back or underside. Each cable has a single coloured band
near its end. Match the band on each cable to the speaker label by colour, and then connect the cable
to the speaker. See page 11 for exact instructions.
Installing the Speakers on the Tallboy Stands
* HT-H7750WM only
1. Find the speaker cable that is attached to the Stand.
Turn the Stand and Stand Base upside-down, unravel
the speaker cable, and then draw it through the hole
in the Stand Base.
1
2
✎✎ Handle the Stand carefully. It is heavy.
Stand
2. Connect the Stand Base to the bottom of the Stand.
3. Insert three 5x20 screws into the marked holes
in the Stand Base, and then tighten them with a
screwdriver as shown in the illustration.
3
4
5
6
4. Place the speaker cable into the slot on the bottom
of the stand base.
5. Connect the assembled stand and a speaker together
by matching the labels on the stand and speaker
with each other as shown in the picture.
6. Insert a screw (5x20) into the hole on the rear of the
speaker and tighten by turning it clockwise with a
screwdriver.
7. Repeat steps 1 through 6 with the other speaker and
stand.
10 - English
Speaker
Stand
Stand Base
Speaker Cable Connections
1. Match each speaker cable bundle to the correct speaker by matching the colour coded plug on
each bundle to the coloured sticker on the bottom or back of each speaker.
2. Connect the speaker wire plugs from each speaker to the back of the product by matching the
colours of the speaker plugs to the colours of the speaker jacks.
HT-H7500WM
Front Speaker (L)
Connections
Front Speaker (R)
FRONT
Wireless Receiver Module
FRONT
R
SUBWOOFER
IMPEDANCE : 3Ω
SPEAKERS OUT
L
CENTER
Centre Speaker
AUX IN
SPEAKERS OUT
FRONT
FRONT
R
SUBWOOFER
IMPEDANCE : 3Ω
Subwoofer
POWER
L
CENTER
LAN
1
HDMI OUT
Surround Speaker (L)
HDMI IN
FM ANT
L
OPTICAL
R
2
DIGITAL
AUDIO IN
Surround Speaker (R)
HT-H7750WM
Front Top/
Front Speaker (L)
FRONT TOP
FRONT
Wireless Receiver Module
FRONT TOP
R
FRONT
R
SUBWOOFER
L
L
IMPEDANCE : 3Ω
Front Top/
Front Speaker (R)
CENTER
SPEAKERS OUT
Centre Speaker
POWER
AUX IN
FRONT TOP
FRONT
R
R
SUBWOOFER
FRONT TOP
FRONT
L
Surround Speaker (R)
* This product should be connected with the SWA-6000 only.
11 - English
LAN
CENTER
SPEAKERS OUT
Surround Speaker (L)
L
IMPEDANCE : 3Ω
Subwoofer
HDMI OUT
1
HDMI IN
2
FM ANT
L
R
OPTICAL
DIGITAL
AUDIO IN
Connections
✎✎ If you place a speaker near your TV set, the screen colour may be distorted because of the magnetic
field.
✎✎ Place the wireless receiver module at the rear of the listening position. If the wireless receiver module
is too close to the product, sound from the speakers may be disrupted because of interference.
✎✎ If you use a device such as a microwave oven, wireless LAN Card, Bluetooth device, or any other
device that uses the 2.4/5.8GHz frequencies near the product, sound from the speakers may be
disrupted because of interference.
✎✎ The maximum transmission distance from the product to the wireless receiver module is about 10m,
but may vary depending on your operating environment. If a steel-concrete wall or metallic wall is
between the product and the wireless receiver module, the system may not operate at all, because
the radio waves cannot penetrate metal.
✎✎ If the product doesn't make a wireless connection, you need to run an ID Set between the product
and wireless receiver module. With the product turned off, press and hold (mute) button on the
remote control for 5 seconds. Turn on the wireless receiver module. Then, press and hold the "ID
SET" button on the back of the wireless receiver module for 5 seconds, and then turn the product
on.
| CAUTION |
▶▶ If you want to install the speakers on the wall, fasten screws or nails (not provided) firmly to the wall
wherever you want to hang a speaker, and then, using the hole in the rear of each speaker, carefully
hang each speaker on a screw or nail.
▶▶ Do not let children play with or near the speakers. They could get hurt if a speaker falls.
▶▶ When connecting the speaker wires to the speakers, make sure that the polarity (+/­–) is correct.
▶▶ Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands
or alien substances into the duct (hole) of the subwoofer speaker.
▶▶ Do not hang the subwoofer on the wall using the duct (hole).
▶▶ The wireless receiving antenna is built into the wireless receiver module. Keep it away from water
and moisture.
▶▶ For optimal listening performance, make sure that the area around the wireless receiver module
location is clear of any obstructions.
▶▶ In 2-CH mode, you will hear no sound from the wireless surround speakers.
Attaching the Toroidal Ferrite Core to the Power Cord of the Wireless
Receiver Module (SWA-6000)
If you attach a Toroidal ferrite core to the power cord of the
wireless receiver module, it will help prevent RF interference from
radio signals.
1. Pull the fixing tab of the Toroidal ferrite core to open it.
2. Make two loops in the wireless receiver module power cord.
3. Attach the Toroidal ferrite core to the wireless receiver
module's power cord as shown in the figure on the right, and
then close it by pressing it until it clicks.
~~ Attach the ferrite core as close to the Wireless Receiver
Module as possible.
12 - English
Connecting to a TV and External Devices
AUX IN
FRONT TOP
FRONT
R
R
SUBWOOFER
FRONT TOP
FRONT
L
L
IMPEDANCE : 3Ω
AUX IN
POWER
LAN
CENTER
SPEAKERS OUT
HDMI OUT
1
HDMI IN
OPTICAL
DIGITAL
AUDIO IN
LAN
HDMI OUT
W
White
1
HDMI IN
Method 1
HDMI IN
External
Devices
L
R
2
Method 2
HDMI OUT
OPTICAL
DIGITAL
AUDIO IN
Method 3
AUDIO OUT
OPTICAL OUT
Connecting to a TV
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI
IN jack on your TV. If the TV supports ARC, you can hear the audio from your TV through the home cinema
with only this cable connected. See page 18 in this manual and the section on ARC in your TV's user's
manual for details.
Connecting to External Devices
Method 1 HDMI IN : Connecting to an External Component with an HDMI Cable
Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI
OUT jack on your digital device.  Select the HDMI1 or HDMI2 mode.
Method 2 AUX IN : Connecting an External Analogue Component
Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out
jack on the external analogue component.  Select the AUX mode.
~~ Be sure to match the colours on the cable plugs to the colours on the input and output jacks.
Method 3 OPTICAL : Connecting an External Digital Audio Component
Use to connect the digital audio output of digital signal components such as Cable Boxes and Satellite
Receivers (Set-Top-Boxes) to the home cinema. Using a digital optical cable (not supplied), connect the
Optical Digital Audio In jack on the product to the Digital Optical Out jack of the external digital device
using a digital optical cable.  Select the D. IN mode.
✎✎ To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.
✎✎ This system supports Digital sampling frequencies of 32 kHz or higher from external digital
components.
✎✎ This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported.
Selecting an External Device to Use
To select an external device after you have connected it, press the SOURCE button. Each time you press
the button, the mode changes in this order : BD/DVD ; D. IN ; AUX ; HDMI1 ; HDMI2 ; FM ; BT
13 - English
Connections
R
Red
FM ANT
FM ANT
L
R
2
Connections
Connecting to a Network Router
Wireless Network
You can connect your product to your network
router using one of the methods illustrated
below.
Wired Network
FRONT TOP
FRONT
R
R
SUBWOOFER
FRONT TOP
FRONT
L
L
IMPEDANCE : 3Ω
AUX IN
POWER
LAN
CENTER
SPEAKERS OUT
HDMI OUT
1
HDMI IN
2
FM ANT
L
R
OPTICAL
Wireless IP sharer
DIGITAL
AUDIO IN
Broadband modem
(with integrated router)
Broadband
service
Broadband
service
Or
✎✎ If your wireless IP router supports DHCP, this
Router
Broadband
service
Broadband
modem
product can use a DHCP or static IP address to
connect to the wireless network.
✎✎ Set your wireless IP router to Infrastructure
mode. Ad-hoc mode is not supported.
✎✎ The product supports only the following
wireless security key protocols:
-- WEP (OPEN/SHARED), WPA-PSK (TKIP/
AES), WPA2-PSK (TKIP/AES)
✎✎ Select a channel on the wireless IP router that
✎✎ Your router or your Internet Service Provider's
policies may prevent the product from
accessing Samsung's software update server.
If this occurs, contact your Internet Service
Provider (ISP) for more information.
✎✎ DSL users, please use a router to make a
network connection.
✎
✎ To use the DLNA function, you must connect
your PC to your network as shown in the
illustrations above.
The connection can be wired or wireless.
is not currently being used. If the channel set
for the wireless IP router is currently being
used by another device nearby, it will result in
interference and communication failure.
✎✎ In compliance with the newest Wi-Fi
certification specifications, Samsung home
cinemas do not support WEP, TKIP, or TKIPAES (WPS2 Mixed) security encryption in
networks running in the 802.11n mode.
✎✎ Wireless LAN, by its nature, may cause
interference, depending on the operating
conditions (AP performance, distance,
obstacles, interference by other radio devices,
etc).
14 - English
Settings
The Initial Settings Procedure
1 PLAY DISC
~~ The Home menu will not appear if you do
not configure the initial settings.
~~ The OSD (On Screen Display) may change in
this product after you upgrade the software
version.
~~ The access steps may differ depending on
the menu you selected.
2 FILMS AND TV SHOWS
Download movies and TV Shows from the
Internet.
✎✎ Depending on your country, this menu
function may not be supported.
3 MULTIMEDIA
Play photos, videos, or music content from
Discs, USB devices, PCs, mobile devices, or
cloud services.
4 SAMSUNG APPS
Download/Access various for pay or free-ofcharge applications.
5 RECOMMENDED
If you are not ready to set up the network
configuration or it is problematic, you can select
Skip and set it up later. (See page 22)
A list of useful and popular apps we
recommend you download.
✎✎ To edit your settings after the initial setup,
6 MY APPS
select Settings > System > Setup in the Home
screen or select the Reset option. (See page
21)
2
3
PLAY DISC
FILMS AND TV SHOWS
Displays downloaded and installed apps. You
can change the display order. (See page 45)
D
H-EN
HIG
VACUUM TUBE SO
UND
7 Screen Mirroring
The Home Screen at a Glance
1
Settings
After you have finished connecting the home
cinema to your TV, turn on the TV, and then turn
on the home cinema. The first initial setup screen
appears. The setup screens appear in this order:
Language, Network Configuration, Terms and
Conditions, Screen Resolution (Aspect Ratio),
and Speaker Layout. Depending on the software
version installed on your home cinema, you may
also see the Software Update screen. Follow the
instructions displayed on each screen, which will
guide you through the easy setup procedure.
Displays information about the disc currently in
the disc tray. Press OK to start playing the disc.
Set up the wireless mirroring function between
the home cinema and a smart phone or tablet.
4
✎✎ Depending on your country, this menu
function may not be supported.
MULTIMEDIA SAMSUNG APPS
Use to switch between external devices
connected to Digital In, Aux, HDMI 1, or HDMI
2, to switch to the Tuner, or to switch to a
connected Bluetooth device. You can also use
the remote's SOURCE button or the main unit's
button.
No Disc
RECOMMENDED
App 1
App 2
5
MY APPS
App 3
App 4
8 Function
App 5
6
App 6
Screen Mirroring Function
7
8
Settings
9
9 Settings
Set various
functions to suit your personal
5V 0.5A
preferences.
15 - English
Settings
`` Selecting an Option on the Home Screen
1. To select an option on the Home screen,
move the cursor using the 78:; buttons
until it highlights the option of your choice,
and then press the OK button.
3
OK / DIRECTION Button :
~~ Press 78:; to move the cursor or
select an item.
~~ Press the OK button to activate the
currently selected item or confirm a
setting.
4
e (EXIT) Button : Press to exit the
current menu.
✎✎ If you leave the product in the stop mode for
more than 5 minutes without using it, a screen
saver will appear on your TV. If the product is
left in the screen saver mode for more than 20
minutes, the power will automatically turn off.
Detailed Function Information
Accessing the Settings Screen
1. Select Settings on the Home screen, and
then press OK. The Settings screen appears.
Settings
Picture
Picture
Sound
Network
Smart Hub
System
Support
UHD Output
Auto
3D Settings
TV Aspect Ratio
16:9 Original
BD Wise
Off
Resolution
Auto
Movie Frame (24 fps)
Auto
DVD 24 fps Conversion
Off
Each Settings function, menu item, and individual
option is explained in detail on-screen. To view
an explanation, use the 78:; buttons to
select the function, menu item, or option. The
explanation will usually appear on the right of the
screen.
A short description of each Settings function
starts below. Additional information on some
of the functions is also in the Appendix of this
manual.
Settings Menu Functions
Picture
UHD Output
2. To access the menus, sub-menus, and
options on the Settings screen, please refer
to the remote control illustration below.
This option outputs HDMI video at UHD (Ultra
High Definition) resolution. This is only available
when Movie Frame is set to Auto.
Buttons on the Remote Control Used
for the Settings Menu
✎✎ To use this feature, you must connect the
3D Settings
1
3
2
product to a device that supports UHD
resolution and you must have content that
plays at 24Fs (film speed).
4
1
HOME Button : Press to move to the
Home screen.
2
' (RETURN) Button : Press to return to
the previous menu.
Set up the 3D related functions.
3D Blu-ray Playback Mode: Select whether
to play a Blu-ray Disc with 3D contents in 3D
Mode. If you move to the Home or Smart Hub
Home menu while in 3D mode, the product will
switch to 2D automatically.
Screen Size: Enter the size of the TV attached
to the product. The product will automatically
adjust the 3D output to the screen size of the
TV.
✎✎ Carefully read the health and safety
information before viewing 3D content. (See
page 3)
16 - English
TV Aspect Ratio
HDMI Deep Colour
Lets you adjust the output of the product to
the screen size of your TV. (See page 51)
Lets you set the product to output video
from the HDMI OUT jack with Deep Colour.
Deep Colour provides more accurate colour
reproduction with greater colour depth.
BD Wise
Resolution
Lets you set the output resolution of the HDMI
video signal to BD Wise, Auto, 1080p, 1080i,
720p, 576p/480p. The number indicates the
number of lines of video per frame. The i and
p indicate interlaced and progressive scan,
respectively.
The more lines, the higher quality.
Movie Frame (24 fps)
Setting the Movie Frame (24 fps) feature to
Auto lets the product adjust its HDMI output
to 24 frames per second automatically for
improved picture quality if attached to a 24Fs
compatible TV.
~~ You can enjoy the Movie Frame (24 fps)
feature only on a TV supporting this frame
rate.
~~ Movie Frame is only available when the
product is in the HDMI 1080p output
resolution modes.
DVD 24 fps Conversion
Converts DVD playback to 24 frames per
second and outputs it via HDMI. This option is
only available when Movie Frame (24 fps) is set
to on.
Fit Screen Size
Lets you select the optimal size for the Smart
Hub or Screen Mirroring Screen.
HDMI Colour Format
Lets you set the colour space format for the
HDMI output to match the capabilities of the
connected device (TV, monitor, etc).
Progressive Mode
Lets you improve picture quality when viewing
DVDs.
Sound
Simple Speaker Setup (HT-H7500WM only)
Lets you configure the settings of the speakers
you have connected to obtain the best possible
surround sound.
Normal Mode : Select if you have set up your
speakers in the recommended speaker layout
with the surround speakers next to or behind
the listening positions.
Simple Mode : Select if you have put your
surround speakers in front of the listening
position. Downmixes the front sound to the
surround sound speakers.
✎✎ SFE, Virtual 7.1 will not operate when the
Simple Mode is on.
Speaker Settings
Sound Output : Lets you select which speakers
are active, either the TV's speakers or the home
cinema's speakers.
Settings (Home theatre speakers) : Lets you
adjust the following speaker settings and turn
the test tone on and off so you can test the
speakers.
-- Volume Level : Lets you adjust the relative
loudness of each speaker from 6dB to
-6dB. For example, if you like deep bass,
you can increase the loudness of the
subwoofer by 6dB.
-- Distance : Lets you adjust the relative
distance of each speaker from the listening
position up to 10 meters. The farther the
distance, the louder the speaker will be.
-- Speaker Test : Begins a test to set the best
surround sound configuration. Press Stop
Test to stop the test while it is in progress.
17 - English
Settings
BD Wise is Samsung’s latest inter-connectivity
feature.
When you connect a Samsung product and a
Samsung TV with BD Wise to each other via
HDMI, and BD Wise is on in both the product
and TV, the product outputs video at the video
resolution and frame rate of the Blu-ray/DVD
Disc.
Settings
Settings (Multiroom Link) : You can enjoy sound
through a remote speaker that is connected to
the home cinema through your home network.
To use the network speaker, select Multiroom.
If there is a network speaker available, it will
appear on the screen.
-- Don't Use : The network speaker is not
used.
-- Multiroom : The network speaker outputs
audio. All network speakers output the
same audio regardless of channel using the
PCM format only.
✎✎ SOUND EFFECT and 3D SOUND are not
applied if Multiroom is set to on.
✎✎ The network speaker is not available when
Screen Mirroring is active.
✎✎ For further details, refer to the Multiroom
Link manual from the web site.
www.samsung.com > Support > Search
for the product name > Multiroom Link >
Download PDF
Sound Customiser
Sound Customiser lets you calibrate the home
cinema for the optimal sound quality based on
your hearing level and the ambient conditions.
7. Select Done on the next screen, and
then press the OK button. The Sound
Customiser screen reappears.
Custom Sound Profile : Select a Sound Profile
you created to activate it. Or select Hearing
Impaired, a Custom Sound Profile especially
composed of large sounds for those with
hearing disorders.
✎✎ If there are more than 3 Custom Sounds
registered, Family mode will be activated
which is composed of the average value of
all registered profiles.
Add Custom Sound : Create and add a new
Custom Sound Profile. See the instructions
above.
Edit Custom Sound : Choose a Custom Sound
Profile to modify it. Follow the same steps
you used when creating a sound profile. This
function is only available if you have added
a Custom Sound Profile using Add Custom
Sound. (See above.)
Manage Custom Sound : Rename or delete
Custom Sound Profiles. This function is only
available if you have added a Custom Sound
Profile using Add Custom Sound. To select a
profile, highlight the check box to the right of
the profile, and then select Rename or Delete.
To create a Custom Sound Profile, follow these
steps:
Equaliser
1. In the Sound Customiser Menu, select Add
Custom Sound.
Lets you configure the Equaliser settings
manually.
2. On the next screen, select Start. The
Preview screen appears.
Smart Volume
3. Select Preview to preview the Test
Sound. Select Next, and then press OK to
continue.
Lets you set the product so that the volume
remains stable when a scene change occurs or
when you change the channel.
4. A 6-step test will start. During each stage,
the TV will sound a test tone at a different
frequency. The tone will begin softly and
increase in volume. Select Yes when you
can hear the test tone. If you want to
listen to it again, select Retry. Each time
you select Yes, the TV will move on to the
next tone. Once the test is complete, a
screen appears that lets you compare the
original sound to the calibrated sound.
Audio Return Channel
5. Select Next, and then press the OK button
to continue. The on-screen keyboard
appears with a default profile name.
6. Enter a name for the calibrated sound
profile or accept the default name, select
Done, and then press the OK button.
Lets you direct the sound from the TV to the
Home Cinema speakers. Requires an HDMI
connection and an Audio Return Channel (ARC)
compatible TV.
~~ If Audio Return Channel is set to On and
you are using an HDMI cable to connect
the product to the TV, digital optical input is
disabled.
~~ If Audio Return Channel is set to Auto and
you are using an HDMI cable to connect
the product to the TV, ARC or digital optical
input is selected automatically.
18 - English
Digital Output
Network Settings
Lets you set the Digital Output to match the
capabilities of the AV receiver you’ve connected
to the product. For more details, please refer
to the digital output selection table. (See page
57)
Lets you configure the network connection so
you can enjoy various features such as Internet
services or AllShare Wi-Fi functionality, and
perform software upgrades.
Dynamic Range Control
Lets you connect a Wi-Fi Direct device to the
product using a peer-to-peer network, without
the need for a wireless router. Note that if the
product is connected to a wireless network,
it may be disconnected when you use Wi-Fi
Direct. (See page 24)
✎✎ Text files, such as files with a .TXT or .DOC
extension, will not display when you are using
the Wi-Fi Direct function.
Multimedia Device Settings
Allow other devices on your network, such as
smart phones and tablets, to share content with
your product.
Downmixing Mode
Device Name
Lets you select the multi-channel downmix
method that is compatible with your stereo
system. You can choose to have the product
downmix to Normal Stereo or to Surround
Compatible.
Lets you assign an identifying name to the
product. You use this name to identify the
product when you are connecting external WiFi devices (smart phones, tablets, etc.) to it.
BD-Live Settings
Audio Sync
When the product is attached to a digital TV,
lets you adjust the audio delay so that the
audio syncs with the video. You can set the
delay between 0 and 300 milliseconds.
✎✎ The Auto function in Audio Sync is
guaranteed to work only with a Samsung
TV that supports the ARC function (the
Anynet+ function).
Network
Network Status
Lets you set various BD-Live functions. BD-Live
allows you to access extra features available on
some Blu-ray Discs if you are connected to the
Internet.
BD-Live Internet Connection : Lets you fully
allow, partly allow, or prohibit a BD-Live
Internet connection.
BD Data Management : Manage BD data
downloaded from a BD-Live service or Blu-ray
Disc.
✎✎ To use BD-Live, you must insert a USB
storage device into the home cinema's USB
port.
Lets you check the current network and
Internet status.
19 - English
Settings
Lets you apply dynamic range control to Dolby
Digital, Dolby Digital Plus, and Dolby TrueHD
audio.
Auto: Automatically controls the dynamic range
of Dolby TrueHD audio, based on information
in the Dolby TrueHD soundtrack. Also turns
dynamic range control off for Dolby Digital and
Dolby Digital Plus.
Off: Leaves the dynamic range uncompressed,
letting you hear the original sound.
On: Turns dynamic range control on for all three
Dolby formats. Quieter sounds are made louder
and the volume of loud sounds is reduced.
Wi-Fi Direct
Settings
System
Smart Hub
VOD Rating Lock
Setup
Lets you lock access to Video on Demand (VOD)
content based on its rating. To use, you must
enter the security PIN. Press and hold the 123
button until the Num pad appears on the screen.
When the Num pad appears, select a number
using the 78:; button and then press the OK
button.
Lets you re-run the Initial Settings procedure.
Refer to the descriptions displayed on the screen.
✎✎ The default security PIN is 0000.
✎✎ Depending on your country, this menu
✎✎ If this function is set to On, Standby power
Lets you set the product to turn on quickly by
decreasing the boot time.
consumption will increase. (About 12W ~
20W)
function may not be supported.
Language
Caption
Use to modify captions on VOD playback that
supports closed captions. Lets you change
displayed caption's font colour and size.
✎✎ The Caption function does not work with
VOD services that don't support closed
captions. For some VOD services that do
support closed captions, the functions
settings may not be applied.
✎✎ Depending on your country, this menu
function may not be supported.
Lets you select the language you prefer for the
on-screen menu, disc menu, audio, subtitles, etc.
~~ The language you select for the disc menu,
disc audio, or subtitles will only appear if it is
supported on the disc.
Device Manager
Lets you connect a wireless USB keyboard or
mouse to the USB port on the front of the
product.
Keyboard Settings: Lets you configure a
wireless USB keyboard connected to the
product.
Terms & Policy
✎✎ You can use the keyboard only when a
Samsung account Terms and Conditions,
Privacy Policy
You can view the terms of use and privacy
policy for Smart Hub, Samsung accounts, and
various other services.
Reset Smart Hub
Resets all Smart Hub settings to their default
settings. To use, you must enter the security
PIN. Press and hold the 123 button until the Num
pad appears on the screen. When the Num pad
appears, select a number using the 78:;
button and then press the OK button.
✎✎ The default security PIN is 0000.
Quick start
QWERTY keyboard screen or window
appears in the Web Browser.
Mouse Settings: Lets you configure a wireless
USB mouse connected to the product. You
can use the mouse in the product's menu in
the same way you use a mouse on your PC.
`` To use a mouse with the product's menu:
1. Connect the USB mouse to the product.
2. Click the primary button you selected
in Mouse Settings. The Simple Menu
appears.
3. Click the menu options you want.
✎✎ Some USB HID keyboards and mice may not
be compatible with your product.
✎✎ Some HID keyboard keys may not work.
✎✎ Wired USB keyboards are not supported.
✎✎ Some applications may not be supported.
✎✎ If a wireless HID Keyboard does not operate
because of interference, move the keyboard
closer to the product.
20 - English
Security
1. Remove any disc or USB storage device.
2. Press and hold the @ button on the front
panel for 5 seconds or more.
All settings will revert to the factory
default settings.
✎✎ When the factory default settings are
restored, all the user stored BD data is
deleted.
DivX® Video On Demand
View DivX® VOD Registration Codes to
purchase and play DivX® VOD contents.
Support
Remote Management
When activated, lets Samsung Call Centre
agents diagnose and fix problems with the
product remotely. Requires an active Internet
connection. Remote Management service
might not be available in some countries.
Software Update
For more information about the Software
Update function, see "Upgrading Software" on
page 25.
Usage Mode
General
Lets you specify the display brightness and time
zone.
Front Display: Lets you change the brightness
of the front panel.
Time Zone: You can specify the time zone
that is applicable to your area.
Menu Transparency: Lets you adjust the
transparency of the menu box.
Anynet+ (HDMI-CEC)
Anynet+ is a convenient function that offers
linked operations with other Samsung products
that have the Anynet+ feature, and lets you
control those products with one Samsung TV
remote. To operate this function, you must
connect this product to an Anynet+ Samsung
TV using an HDMI cable.
To use an Anynet+ (HDMI-CEC) function,
follow the instructions below.
Lets you set the Usage Mode. If you are using
the home cinema at home, always select Home
Use. Store Demo is for retail display settings
only.
Contact Samsung
Provides contact information for assistance
with your product.
Reset
Reverts all settings to their defaults except for
the network and Smart Hub settings. Requires
that you enter your security PIN. Press and hold
the 123 button until the Num pad appears on
the screen. When the Num pad appears, select
a number using the 78:; button and then
press the OK button. The default security PIN is
0000.
1)Connect the product to an Anynet+
(HDMI-CEC)-compliant Samsung TV using
HDMI Cable.
21 - English
Settings
Press and hold the 123 button until the Num
pad appears on the screen. When the Num pad
appears, select a number using the 78:;
button and then press the OK button. The
default security PIN is 0000. Enter the default
PIN to access the security function if you
haven't created your own PIN.
BD Parental Rating: Prevents playback of
Blu-ray Discs with a rating equal to or above
a specific age rating you have set unless you
enter the PIN.
DVD Parental Rating: Prevents playback of
DVDs with a rating above a specific numerical
rating you have set unless you enter the PIN.
Change PIN: Lets you change the 4-digit PIN
used to access security functions.
`` If you forget your PIN
2)Set the Anynet+ (HDMI-CEC) feature to
On in both the TV and the product.
3)Search for and then select the product
in the TV's Anynet+ (HDMI-CEC) list. For
more exact instructions, see the Anynet+
section of the TV's user's manual.
Settings
Network Setup
ĞĞ
When you connect this product to a network,
you can use network based applications and
functions such as Smart Hub and BD-LIVE, and
upgrade the product's software through the
network connection. For more information about
accessing and using Internet services, see the
Network Services chapter of this manual on pages
43~50. Instructions for configuring the
network connection start below.
Configuring Your Network Connection
If you didn't configure your network connection
during the initial settings procedure or you need
to reset the network connection, follow the
directions below.
Before you begin, contact your Internet Service
Provider to find out if your IP address is static or
dynamic. If it is dynamic, and you have a wired
or wireless network, we recommend using the
Automatic configuration procedures described
below.
If you are connecting to a wired network, connect
the product to your router using a LAN cable
before you start the configuration procedure.
To begin configuring your network connection,
follow these steps:
1. In the Home screen, select Settings, and then
press the OK button.
Wired - Manual
If you have a static IP address or the automatic
procedure does not work, you'll need to set the
Network Settings values manually.
After following Steps 1 to 3 above:
1. In the Network Settings screen, change
Network type to Wired. Then, select Connect
and press the OK button.
The product searches for a network, and
then displays the connection failed message.
✎✎ If it is possible to connect the home cinema
to your network wirelessly, select Change
Network at this point, change the Network
type to Wireless, and then go to the
instructions for wireless networks on the next
page.
Network Settings
Wired network connection failed.
MAC Address
IP Address
Subnet Mask
Gateway
DNS Server
XX:XX:XX:XX:XX:XX
0. 0. 0. 0
0. 0. 0. 0
0. 0. 0. 0
0. 0. 0. 0
Unable to connect to the network. Try the following: check if your IP address is set
correctly in IP Settings. Contact your Internet service provider for more information.
Change Network
IP Settings
Retry
Close
2. Select Network, and then press the OK
button.
2. Use the :; buttons to select IP Settings,
and then press the OK button. The IP Settings
screen appears.
3. Select Network Settings, and then press the
OK button.
3. Select the IP setting field, and then set it to
Enter manually.
4. Go to the instructions for Wired networks
starting or the instructions for Wireless
networks starting on the next page.
4. Select a parameter to enter (IP Address, for
example), and then press OK. Use the 78
buttons on the remote control to enter the
numbers for the parameter. Or use the Num
keypad to enter a parameter number. Press and
hold the 123 button until the Num pad appears
on the screen. When the Num pad appears,
select a number using the 78:; button
and then press the OK button. Use the :;
buttons on the remote control to move from
entry field to entry field within a parameter.
When done with one parameter, press the
OK button.
Wired Network
ĞĞ
Wired – Automatic
After following Steps 1 to 3 above:
1. In the Network Settings screen, change
Network type to Wired. Then, select Connect
and press the OK button. The product
detects the wired connection, verifies the
network connection, and then connects to
the network.
2. When it is done, highlight OK, and then
press OK button.
5. Press the 7 or 8 button to move to another
parameter, and then enter the numbers for
that parameter following the instructions in
Step 4.
6. Repeat Steps 4 and 5 until you have filled in
all parameters.
22 - English
✎✎ You can get the network parameter values
from your Internet provider.
7. When finished entering all the parameter
values, select OK, and then press the OK
button. The home cinema verifies the
network connection and then connects to
the network.
Wireless Network
ĞĞ
Wireless - Automatic
After following Steps 1 to 3 in "Configuring Your
Network Connection" on page 22:
1. In the Network Settings screen, change
Network type to Wireless. The product
searches for and then displays a list of the
available networks.
Network Settings
Select your network type.
Network type
Wireless
Wireless network
si-ap
You can connect your Bluray player to the internet.
Please select which wireless
network to use.
iptime
KIMING_VTOWER
Refresh
WPS(PBC)
2. Select the desired network, and then press
the OK button.
3. On the Security screen, enter your network's
security code or pass phrase.
Enter letters by selecting a letter with
78:; buttons, and then pressing OK
button.
4. When finished, select Done, and then press
the OK button. The product verifies the
network connection and then connects to
the network.
pass phrase on one of the set up screens you
used to set up your router or modem.
ĞĞ
Wireless - Manual
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
After following Steps 1 to 3 in "Configuring Your
Network Connection" on page 22:
1. In the Network Settings screen, change
Network type to Wireless. The product
searches for and then displays a list of the
available networks.
2. Scroll through the list, select the desired
network or Add Network, and then press the
OK button.
3. If you selected a network in Step 2, go to
Step 6.
If you selected Add Network, go to Step 4.
4. Enter your wireless network or wireless
router's name.
~~ Enter letters by selecting a letter with the
78:; buttons, and then pressing the
OK button.
~~ To display capital letters (or redisplay lower
case letters if capital letters are displayed),
, and then press the OK button.
select
~~ To display symbols and punctuation, select
123#&, and then press the OK button. To
redisplay letters, select 123#&, and then
press the OK button.
When finished, select Done, and then press
the OK button.
5. On the Security type screen that appears,
use the ,. buttons to select the network's
Security type, and then press the OK button.
On the next screen, enter your network's
security code or pass phrase.
~~ Enter letters by selecting a letter with the
78:; buttons, and then pressing the
OK button.
When finished, select Done, and then press
the OK button. The product searches for the
network.
6. The Network connection fail screen appears.
Use:; buttons to select IP Settings, and
then press the OK button.
23 - English
Settings
You can set up a wireless network connection in
three ways:
-- Wireless Automatic
-- Wireless Manual
-- WPS(PBC)
Before you configure the wireless network
connection, disconnect any wireless network
devices currently connected to the product
or, if applicable, the product's current wired
connection.
✎✎ You should be able to find the security code or
Settings
7. Select the IP setting field, and then set it to
Enter manually.
8. Select a network parameter to enter (IP
Address, for example), and then press
OK button. Use the 78 buttons on the
remote control to enter the numbers for
the parameter. Or use the Num keypad to
enter a parameter number. Press and hold the
123 button until the Num pad appears on the
screen. When the Num pad appears, select a
number using the 78:; button and then
press the OK button. Use the :; buttons on
the remote control to move from entry field
to entry field within a parameter. When done
with one value, press the OK button.
9. Press the , or . button to move to another
parameter, and then enter the numbers for
that parameter following the instructions in
Step 8.
10. Repeat Steps 8 and 9 until you have filled in
all parameters.
✎✎ You can get the Network parameter values
from your Internet provider.
11. When finished, select OK, and then press the
OK button. The Security screen appears.
12. On the Security screen, enter your network's
security code or pass phrase. Enter letters by
selecting a letter with the 78:; buttons,
and then pressing the OK button.
13. When finished, select Done at the right of
the screen, and then press the OK button.
The product verifies the network connection
and then connects to the network.
14. After the home cinema verifies the network,
select OK, and then press the OK button.
✎✎ You can also begin the Manual Network setup
by going to Settings > Network > Network
Status.
ĞĞ
WPS(PBC)
One of the easiest ways to set up the wireless
network connection is using the WPS(PBC)
function. If your wireless router has a WPS(PBC)
button, follow these steps:
After following Steps 1 to 3 in "Configuring Your
Network Connection" on page 22:
3. Press the WPS(PBC) button on your
router within two minutes. Your product
automatically acquires all the network
settings values it needs and connects to your
network after the network connection is
verified.
4. When it is done, highlight OK, and then
press the OK button.
✎✎ For a WPS connection, set your wireless
router’s security encryption to AES. WEP
security encryption does not support a WPS
connection.
Wi-Fi Direct
The Wi-Fi Direct function allows you to connect
Wi-Fi Direct devices to the product and each other
using a peer-to-peer network, without a wireless
router.
✎✎ Some Wi-Fi Direct devices may not support
the AllShare function if connected via Wi-Fi
Direct. If this is the case, change the network
connection method you used to connect the
device to the home cinema.
✎✎ Wi-Fi Direct transmissions can interfere
with Bluetooth signals. Before you use the
Bluetooth function, we strongly recommend
that you turn off the Wi-Fi Direct function on
any device in which it is currently on.
1. Turn on the Wi-Fi Direct device and activate
its Wi-Fi Direct function.
2. In the Home screen, select Settings, and then
press the OK button.
3. Select Network, and then press the OK
button.
4. Select Wi-Fi Direct, and then press the OK
button.
The Wi-Fi Direct devices that you can connect
the home cinema to appear.
Settings
1. In the Network Settings screen, change
Network type to Wireless. The product
searches for and then displays a list of the
available networks.
2. Scroll the list down, select WPS(PBC), and
then press the OK button.
24 - English
Wi-Fi Direct
Device Name : [HTS]H7500WM
Select your Wi-Fi Direct device to connect to.
AndroidXXXXXXX
Disconnected
Refresh
Close
5. You have three ways to complete the Wi-Fi
connection:
~~ Through the Wi-Fi device.
~~ Through the product using PBC.
~~ Through the product using a PIN.
Each is covered below.
Through the Wi-Fi Device
~~ The PBC and PIN procedures connect devices
automatically.
Through the Product Using PBC
1. Select the Wi-Fi Direct device you want to
connect to this product, and then press the
OK button.
2. The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the Wi-Fi
Direct screen as connected.
Through the Product Using a PIN
1. Select the Wi-Fi Direct device you want to
connect to this product, and then press the
OK button.
2. The PIN pop-up appears.
3. Note the PIN code in the pop-up, and then
enter it into the appropriate field in the Wi-Fi
Direct device you want to connect.
4. The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the Wi-Fi
Direct screen as connected.
connection will be disconnected when you use
the Wi-Fi Direct function.
✎✎ Text files, such as files with a .TXT or .DOC
extension, will not display when you are using
the Wi-Fi Direct function.
Upgrading Software
The Software Update menu allows you to
upgrade the product’s software for performance
improvements or additional services.
~~ Never turn the product off or back on
manually during the update process.
1. In the Home menu, select Settings, and then
press the OK button.
2. Select Support, and then press the OK
button.
3. Select Software Update, and then press the
OK button.
4. To download update software and update
now, select Update now, and then press the
OK button. See "Update now" on the next
page for details.
5. To let the product download update software
automatically when available, select Auto
update, and then press the OK button. (See
page 26)
✎✎ The upgrade is complete when the product
turns off, and then turns on again by itself.
✎✎ Samsung Electronics takes no legal
responsibility for product malfunction
caused by an unstable Internet connection
or consumer negligence during a software
upgrade.
✎✎ If you want to cancel the upgrade while the
upgrade software is downloading, press the
OK button.
✎✎ When a system upgrade is in progress,
"UPDATE" is displayed on the front panel.
25 - English
Settings
1. On the Wi-Fi device, follow the device's
procedure for connecting to another Wi-Fi
Direct device. See the device's user manual
for instructions.
2. When you have completed the procedure,
you should see a pop-up on your TV screen
saying that a device that supports Wi-Fi
Direct has requested to connect. Select OK,
and then press the OK button to accept.
3. The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the Wi-Fi
Direct screen as connected.
✎✎ The current wired or wireless network
Settings
Update now
Update by USB
You can use Update now to update the software
through your network connection or by using
a USB flash drive. The network instructions are
below. The USB flash drive instructions are on this
page.
1. Visit www.samsung.com.
1. Select Update now, and then press the OK
button. The Update now pop-up appears.
2. The product searches on line for the latest
software version.
3. If it does not find an update, the "There are
no new updates for you at the moment."
pop-up appears. Press the OK button to exit.
4. If it finds a new version, the Update Request
pop-up appears.
5. Select OK. The product upgrades the
software, turns off, and then turns on
automatically.
6. If you do not select OK or Cancel in one
minute, the product stores the new upgrade
software. You can upgrade the software later
using Auto update.
7. If you select Cancel, the product cancells the
upgrade.
✎✎ When the system upgrade is done, check the
software details in the Product Information
section of the Contact Samsung screen.
✎✎ Do not turn off the product during the
Software Upgrade. It may cause the product
to malfunction.
Auto update
You can set the Auto update function so that the
product downloads new upgrade software when
it is in Auto update mode.
In Auto update mode, the product is on, but
its Internet connection is active. This allows
the product to download upgrade software
automatically, when you are not using it.
1. Press the 78 buttons to select Auto update
mode, and then press the OK button.
2. Select On or Off.
If you select On, the product will
automatically download new upgrade
software when it is in Auto update mode
with the power on. If it downloads new
upgrade software, the product will ask you
if you want to install it when you turn the
product on.
2. Click SUPPORT on the top right of the page.
3. Enter the product's model number into the
search field. As you enter the model number,
a drop down will display products that match
the model number.
4. Left click your product's model number in the
drop down list.
5. On the page that appears, scroll down to and
then click Firmware Manuals & Downloads.
6. Click Firmware in the centre of the page.
7. Click the ZIP button in the File column on the
right side of the page.
8. Click Send in the first pop-up that appears.
Click OK in the second pop-up to download
and save the firmware file to your PC.
9. Unzip the zip archive to your computer. You
should have a single folder with the same
name as the zip file.
10. Copy the folder to a USB flash drive.
11. Make sure no disc is inserted in the product,
and then insert the USB flash drive into the
USB port of the product.
12. In the product’s menu, go to Settings >
Support > Software Update.
13. Select Update now.
14. The product searches for the software on the
USB drive. When it finds the software, the
Update Request pop-up appears.
15. Select OK. The product upgrades the
software, turns off, and then turns on
automatically.
16. There should be no disc in the product when
you upgrade the software using the USB
jack.
✎✎ When the system upgrade is done, check the
software details in the Product Information
section of the Contact Samsung screen.
✎✎ Do not turn off the product during the
software upgrade. It may cause the product to
malfunction.
✎
✎ Software upgrades using the USB jack must
be performed with a USB flash drive only.
✎✎ To use the Auto update function, your product
must be connected to the Internet.
26 - English
Playing Content
Your home cinema can play content located on
Blu-ray/DVD/CD discs, USB devices, PCs, smart
phones, tablets, and on the Web.
To play content located on your PC or a mobile
device, you must connect the PC or mobile device
and the product to your network. To play content
on your PC, you must also download and install
AllShare network software or already have DLNA
network software on your PC.
✎✎ PCs running Windows 7 and Windows 8 have
DLNA software (Play To) built in.
-- When cleaning, wipe gently from the inside
to the outside of the disc.
-- Disc Storage
`` Do not keep in direct sunlight.
`` Keep in a cool ventilated area.
`` Keep in a clean protective jacket and
store vertically.
Playing Multimedia Files
1. In the Home screen, select MULTIMEDIA,
and then press the OK button. The Recently
Played screen appears.
Playing Commercial Discs
1. Press the ^ button to open the disc tray.
✎✎ When you select an item, information about
3. Press the ^ button to close the disc tray.
Playback starts automatically.
4. If playback does not start automatically, press
the p button on the remote.
Disc Storage & Management
~~ Holding Discs
-- Fingerprints or scratches on
a disc may reduce sound and
picture quality or cause skipping.
-- Avoid touching the surface of a disc where
data has been recorded.
-- Hold the disc by the edges so that fingerprints
will not get on the surface.
-- Do not stick paper or tape on the disc.
~~ Cleaning Discs
-- If you get fingerprints or dirt
on a disc, clean it with a mild
detergent diluted in water and
wipe with a soft cloth.
the item scrolls across the bottom of the item's
listing window.
3. Select an item or device, and then press
the OK button. A screen appears listing the
contents of the item or device. Depending
on how the contents are arranged, you will
see either folders, individual files, or both.
4. If necessary, use the 78:; buttons to
select a folder, and then press the OK button.
5. Use the 78:; buttons to select a file to
view or play, and then press the OK button.
6. The selected file plays.
7. Press the ' (RETURN) button to exit a folder
or the e (EXIT) button to return to the
Home screen.
8. Go to pages 29~41 for instructions that
explain how to control playback of videos,
music, and pictures on a storage device.
✎✎ To list only one type of media file, use the Filter
( ) function in the top-right corner of the
item or device screen.
27 - English
Playing Content
2. Place a disc gently into the disc tray with the
disc’s label facing up.
2. Select Storage, Network Device, or Storage
Service at the bottom of the screen.
~~ Storage - Displays storage devices
connected to the product.
~~ Network Device - Displays mobile devices,
PCs, tablets, and similar devices connected
through the network.
~~ Storage Service - Displays the cloud
services you are logged in to.
Playing Content
✎✎ In the Filter(
) drop down, select Photos,
Videos, or Music.
✎✎ Even though the product will display folders
that contain all content types, it will only
display files of the content type you selected
For example, if you selected Music, you will
only be able to see music files.
✎✎ In the Filter(
Playing Files on a Storage Device
3. If necessary, use the 78:; buttons to
select a folder, and then press the OK button.
Method 1 : If the product is turned on after
4. Select a file to view or play, and then press
the OK button.
you connect a storage device
1. Turn the product on.
2. Follow the directions in “Playing Multimedia
Files” on page 27. In Step 2, select
Storage.
Method 2 : If you connect a USB device while
the product is turned on
1. Connect the storage device to the product.
(a recorded CD, a USB device, etc.) The "New
device connected." pop-up appears. If two or
more storage devices are connected, use the
:; buttons to switch between devices.
PLAY DISC
FILMS AND TV SHOWS
MULTIMEDIA SAMSUNG APPS
New device connected.
USB Flash Disk
All Content
Videos
RECOMMENDED
App 1
App 2
MY APPS
Music
App 3
App 4
App 5
5. Press the ' (RETURN) button to exit a folder
or the e (EXIT) button to return to the
Home screen.
6. Go to pages 29~41 for instructions that
explain how to control playback of videos,
music, and pictures on a storage device.
✎✎ If you insert a disc when playing a USB device
or phone, the device mode changes to "Disc"
automatically.
✎✎ If your cellular phone is DLNA compatible, you
can play contents without connecting a USB
cable.
Playing Media Content Saved on a
Computer/Mobile Device
You can play media content on the Home cinema
that is stored on a computer or mobile device
connected to the same network as the Home
cinema.
✎✎ Samsung Link software must be installed on
Photos
No Disc
) drop down, select Photos,
Videos, or Music.
✎✎ Even though the product will display folders
that contain all content types, it will only
display files of the content type you selected
For example, if you selected Music, you will
only be able to see music files.
App 6
Screen Mirroring Function
Settings
✎✎ If the pop-up does not appear, go to Method
1.
2. Use the 78 buttons to select All Content,
Photos, Videos, or Music, and then press the
OK button. Depending on how the contents
are arranged, you will see either folders,
individual files, or both.
✎✎ To list only one type of media file, use the
Filter( ) function in the top-right corner of
the item or device screen.
the computer that contains the content you
want to play on the Home cinema. The mobile
device must support Samsung Link. For more
information, visit Samsung’s content and
service portal at http://link.samsung.com.
✎✎ You may experience compatibility issues when
attempting to play media files via a third-party
DLNA server.
✎✎ The content shared by a computer or a
mobile device may not play depending on the
encoding type and file format of the content.
In addition, some functions may not be
available.
✎✎ The media content may not play smoothly
depending on the network status. If this
occurs, use a USB storage device.
28 - English
1. In the Home screen, select MULTIMEDIA, and
then press the OK button.
1. In the Home screen, move to MULTIMEDIA
and press OK button.
2. Select Network Device at the bottom of
the screen, and then press the OK button.
Storages devices connected to the same
network as the Home cinema are listed.
2. Select Storage Service at the bottom of the
screen.
3. The cloud services linked with your Samsung
account appear.
3. Select a storage device, and then press the
OK button. The folders and files shared by
the selected storage device are listed.
4. Select a cloud service. The folders and files in
the selected cloud service are listed.
4. If necessary, use the 78:; buttons to
select a folder, and then press the OK button.
5. Select a file to view or play, and then press
the OK button.
7. Go to pages 29~41 for instructions that
explain how to control playback of videos,
music, and pictures on a storage device.
✎✎ To list only one type of media file, use the
Filter( ) function in the top-right corner of
the item or device screen.
✎✎ In the Filter(
) drop down, select Photos,
Videos, or Music.
✎✎ Even though the product will display folders
that contain all content types, it will only
display files of the content type you selected
For example, if you selected Music, you will
only be able to see music files.
✎✎ Alternatively, move to the media content
to play and press the OK button to play the
content.
6. Select a file to view or play, and then press
the OK button.
7. Press the ' (RETURN) button to exit a folder
or the e (EXIT) button to return to the
Home screen.
8. Go to pages 29~41 for instructions that
explain how to control playback of videos,
music, and pictures located in a Storage
Service.
Controlling Video Playback
You can control the playback of video content
located on a Blu-ray/DVD disc, USB device, mobile
device, or PC. Depending on the disc or contents,
some of the functions described in this manual
may not be available.
Buttons on the Remote Control used
for Video Playback
1
Playing Media Content Saved in a
Cloud Service
2
Dropbox and SkyDrive and other cloud services
save user content such as photos, videos,
and music files on a remote server accessible
through the Internet. When your home cinema
is connected to the Internet, you can view or
play the media content saved in a cloud service
through the home cinema.
✎✎ To play the content in a cloud service, you
must log into your Samsung account and link
the Samsung account to the cloud service
account. For the information about linking
your Samsung account to a cloud service
account, refer to the "Logging In to Your
Samsung Account" section.
sing the disc menu, title menu, popup
1U
menu, and title list
DISC MENU
During playback, press this button to display
the Disc menu.
29 - English
Playing Content
6. Press the ' (RETURN) button to exit a folder
or the e (EXIT) button to return to the
Home screen.
5. If necessary, use the 78:; buttons to
select a folder, and then press the OK button.
Playing Content
TITLE MENU
3D
During playback, press this button to display
the Title menu or Popup menu.
~~ If your disc has a playlist, press the Sort By
button to go to the playlist.
Use 3D menu to select the Side by Side or
Top Bottom option if the 3D content currently
playing does not appear properly in 3D mode.
2 Playback related buttons
The product does not play sound in Search, or
Slow mode.
~~ To return to normal speed playback, press the
p button.
p
e (EXIT)
✎✎ Use 3D menu for 3D content only. If you
apply the Side by Side or Top Bottom format
to 2D content, it will not be displayed
properly.
Select Scene
Starts/Pauses playback.
You can use the Select Scene function during
playback to view or start a movie from the
scene of your choice.
Stops playback.
✎✎ If the index information in the file is
Fast
Motion
Play
During playback, press and hold
the [ or ] button.
Each time you press and hold
the [ or ] button, the
playback speed will change.
Slow
Motion
Play
In pause mode, press and hold
the ] button.
Each time you press and hold
the ] button, the playback
speed will change.
Skip
Motion
Play
During playback, press the [
or ] button.
Each time you press the [ or
] button, the disc moves to
the previous or next chapter or
file.
damaged or the file does not support
indexing, you will not be able to use the
Select Scene function.
✎✎ If you are using the DLNA function after
connecting to a computer through
your network, Select Scene may not be
supported.
Search Titles : If there is more than one
movie on the disc or device, select to start a
different title.
1. Select Search Titles, and then press the
OK button.
2. Use the 78 buttons to select a title,
and then press the OK button.
Chapter Search : Select to play the chapter of
your choice.
1. Select Chapter Search, and then press
the OK button.
2. Use the 78 buttons to select a chapter,
and then press the OK button.
Search Time Bar : Select to play the movie
from a selected time point.
Using the TOOLS Menu
Commercial Discs
During playback, press the TOOLS button.
1. Select Search Time Bar, and then press
the OK button.
File-based Video
During playback, press the TOOLS button.
Use the :; buttons to select Settings(T) in the
upper right corner, and then press the OK button.
Play from the beginning
2. Press and hold the 123 button until the
Num pad appears on the screen. When
the Num pad appears, select a number
using the ,.:; button and then press
the OK button.
✎✎ You can also use the:; buttons to
Select to return to the beginning of the movie,
and then press the OK button.
advance or rewind the movie. The movie
advances or rewinds one minute each time
you press the :; buttons.
30 - English
Repeat Mode
Equaliser Settings
Lets you repeat a title, chapter, or specific
section.
-- Off : Select to return to normal playback.
-- Title : Choose to repeat a selected title.
-- Chapter : Choose to repeat a specific chapter.
-- Repeat A-B : Choose to repeat a specific
section.
Lets you set the equalizer.
1. Press the OK button at the point where
you want repeat play to start (A).
2. Press the OK button at the point where
you want repeat play to stop (B).
✎✎ Depending on the disc, the screen may not
display all repeat options.
when you play a video recorded as a digital
file.
✎
✎ The screen may not display Chapter or
Title immediately. Continue to press the
78 buttons until your choice is inside the
applicable field.
✎✎ The screen may not display Repeat A-B
immediately. Continue to press the 78
buttons until Repeat A-B is inside the
applicable field.
✎✎ You must set point (B) at least 5 seconds of
playing time after point (A).
Equaliser Mode is On.
Audio
Select to set the desired audio language.
Audio Sync
In some cases when the product is connected
to a digital TV, the audio signal may not
synchronize with the video signal. If this occurs,
use Audio Sync to adjust the audio delay time
to match the video signal.
Subtitle
Lets you set the desired subtitle language.
Subtitle Settings
Lets you set the desired subtitle options.
Angle
To view a scene from another angle. The Angle
option displays the number of angles available
to view (1/1, 1/2, 1/3, etc.).
BONUSVIEW Video
BONUSVIEW Audio
Picture Mode
Lets you set the desired Bonusview option.
Lets you set the Picture Mode.
-- Dynamic : Increases sharpness and
brightness.
-- Standard : Choose this setting for most
viewing applications.
-- Movie : The best setting for watching movies.
-- User : Lets you adjust the sharpness and
noise reduction function respectively.
Rotate
✎✎ When you use the BD Wise function, this
menu will not appear.
Equaliser Mode
Set Equalizer Mode on to use the equalizer.
You can rotate the screen clockwise or
counterclockwise by 90 degrees.
Full Screen
Lets you set the size of the video image.
Choose Original, Mode1 (larger), or Mode2
(largest).
Information
Select to view video file information.
✎✎ Depending on the disc or storage device, the
Tools menu may differ.
✎✎ Video files with high bitrates of 20Mbps or
more strain the product’s capabilities and may
stop playing during playback.
31 - English
Playing Content
✎✎ Off, Repeat One, and Repeat All appear
✎✎ Equaliser Settings only appears when
Playing Content
✎✎ The Sort By and Options menus are usually
Using the Sort By & Options Menus
Select the Filter( ) function, and then Videos to
display videos only.
✎✎ Even though the product will display folders
that contain all content types, it will only
display files of the content type you selected
For example, if you selected Videos, you will
only be able to see video files.
On the screen that lists the video files, use the
78:; buttons to select Sort By or Options in
the upper right, and then press the OK button.
Videos
Sort By
`` Date
Displays all the folders with videos by date. If
you select a folder, and then press OK button,
displays all the video files in the folder by
date.
`` Title
Displays all the video files on the media or
storage device by title.
`` Folder
Displays all the folders on the media or
storage device.
available when you are viewing video files on
a USB flash drive, a PC, a disc you recorded
yourself, or a mobile device. They are usually
not available if you are viewing a commercial
Blu-ray, DVD, or CD disc.
Controlling Music Playback
You can control the playback of music content
located on a DVD, CD, USB, mobile device, or PC.
Depending on the disc or contents, some of the
functions described in this manual may not be
available.
Buttons on the Remote Control used
for Music Playback
4
13
2
Options
`` Play Selected
Play Selected lets you create a playlist by
selecting specific files to play. It works
essentially the same way for all media. See
"Using Play Selected with a Commercial CD"
on page 35.
`` Send
Select Send to upload selected files to on-line
sites (Picasa, Facebook, etc.) or to devices.
To use Send with an on-line site, you need
to establish an account with the on-line site,
and then log in using the Log In function.
Send works essentially the same way for
music, photos, and videos. For general
instructions, see "Using the Send Function"
on page 41.
1
[ ] buttons : Move to the previous/
next track.
2
e (EXIT) button : Stops a track.
3
Fast Play (Audio CD [CD-DA] only)
During playback, press and hold the [
or ] button.
Each time you press and hold the [
or ] button, the playback speed will
change.
4
p button : Plays/Pause a track.
✎✎ Depending on the disc or storage device, the
Options and Sort By menus may differ. All
options may not be displayed.
32 - English
Music Screen Controls
Rewind the track.
TRACK 001
TRACK 001
00:00/00:00
00:43
TRACK 002
03:56
TRACK 003
04:41
TRACK 004
04:02
TRACK 005
03:43
TRACK 006
03:40 1
TRACK 007
04:06
TRACK 008
03:52
TRACK 009
03:04
TRACK 010
04:02

1
,
1
1
00:03:35
Repeat one track or all tracks.
Play tracks in random order.
Display the Equaliser.
On the
Music List
screen only.
TRACK 001
00:00:40
Advance the track.
Equaliser Settings : Adjust the
equalizer manually. (Available
only when Equaliser Mode is on)
Play Selected : Play Selected
lets you select specific files to
play. It works essentially the
same way for all media. See
"Using Play Selected with SelfRecorded Media (CDs, USB
Devices, etc.)" on page 35.
Ripping : The Ripping function
converts CD audio to the
mp3 format and saves the
converted files on a USB device
or a mobile device connected
to the product. See Ripping on
page 37.
Information : Shows the track
information.
To access the controls, play a track, and then use
the 78:; buttons to move to the control of
your choice.
✎✎ The music screen controls are only accessible
On the Track List screen, use 78 buttons to
move the highlight to the track you want. Press
the OK button to play the track.
On Screen Music Controls
1
when a track is playing.
✎✎ All controls do not appear at the same time.
✎✎ For file-based contents, the available Settings
(
) options will differ.
Using the Sort By & Options Menus
Pause a track.
Select the Filter( ) function, and then Music to
display music files only.
Play a track.
✎✎ Even though the product will display folders
Move to the previous track.
1
Move to the next track.
that contain all content types, it will only
display files of the content type you selected
For example, if you selected Music, you will
only be able to see music files.
1
33 - English
Playing Content
The Track List screen appears initially, and the
first track begins to play. If you are playing a
commercially recorded disk and don't press a
button on the remote momentarily, the Playback
screen appears. To return to the Track List screen,
press the ' (RETURN) button.
1
Playing Content
On the screen that lists the music files, use the
78:; buttons to select Sort By or Options in
the upper right, and then press the OK button.
Music
✎✎ Depending on the disc or storage device, the
Options menu may differ. All options may not
be displayed.
✎✎ Rename Playlist and Delete Playlist appear only
if a playlist exists.
Sort By
Repeating Tracks on an Audio CD
`` Track
Displays all the music tracks on the media or
storage device.
`` Album
Displays all the music on the media or
storage device by album.
`` Artist
Displays all the music files on the media or
storage device by artist
`` Genre
Displays all music on the media or storage
device by genre.
`` Folder
Displays all the folders on the media or
storage device.
You can set the product to repeat tracks on an
audio CD (CD-DA/MP3).
1. On the Track List screen during playback,
in the
use the 78:; buttons to select
lower left corner of the screen, and then
press the OK button.
1
2. Use the 78 to select the Repeat mode you
want - Off, One Song, or All - and then press
the OK button.
TRACK 001
Options
`` Play Selected
Play Selected lets you select specific files to
play. It works essentially the same way for
all media. See "Using Play Selected with a
Commercial CD" on page 35 and "Using
Play Selected with Self-Recorded Media (CDs,
USB Devices, etc.)" on page 35.
`` Send
Select Send to upload selected files to on line
sites (Picasa, Facebook, etc.) or to devices. To
use Send, you need to establish an account
with the on-line site, and then log in using
the Log In function. Send works essentially
the same way for music, photos, and videos.
For general instructions, see "Using the Send
Function" on page 41.
`` Encoding
Select to manage the text encoding options.
`` Rename Playlist
Lets you modify the name of a playlist.
`` Delete Playlist
Lets you delete a playlist.
`` Add to Playlist
Lets you add additional files to a playlist.
TRACK 001
00:00/00:00
00:43
TRACK 002
03:56
TRACK 003
04:41
TRACK 004
04:02
TRACK 005
03:43
TRACK 006
03:40
TRACK 007
04:06
TRACK 008
03:52
TRACK 009
03:04
TRACK 010
04:02
Track List screen

TRACK 001
00:00:40
00:03:35
Playback screen
Press the ' (RETURN) button on the remote to
return to the Track List screen.
34 - English
Shuffling Tracks on an Audio CD
You can set the product to play tracks on an audio
CD (CD-DA/MP3) at random.
1. During playback, use the ,.:; buttons
in the lower left corner of the
to select
screen, and then press the OK button.
2. Use the 78 to set the Shuffle mode Off or
On, and then press the OK button.
1
Using Play Selected with a Commercial
CD
1. On the Track List screen, select Settings ( )
on the bottom left, and then press the OK
button. The Settings menu appears.
✎✎ You can select up to 99 tracks from an Audio
CD (CD-DA) using Play Selected.
✎✎ On the Play Selected screen, you can also
choose Select All, Clear All, and Cancel.
- Use Select All to select all tracks. This cancels
your individual track selections. When you
press the ' (RETURN) button on your remote
or select Play and then press the OK button,
all tracks will appear on the Track List screen,
and the product will begin to play all tracks
from Track 001.
- Cancel cancels any changes you made on the
Play Selected screen. When you return to the
Track List screen, the Play Selected list will be
unchanged.
Using Play Selected with Self-Recorded
Media (CDs, USB Devices, etc.)
1. Insert a self-recorded CD or USB device with
self-recorded files into the home cinema. The
New device connected. pop-up appears.
2. Select Music, and then press the OK button
on your remote. The File List screen appears
displaying icons for tracks, folders, or both.
3. If necessary, use the 78:; buttons to
select a folder, and then press the OK button.
4. When the tracks you want to play are
displayed, select Options in the upper right,
and then press the OK button.
5. Select Play Selected, and then press the OK
button. Check boxes appear on the upper
left sides of the track icons.
6. Use the 78:; buttons to select a track,
and then press the OK button. A check
appears in the check box.
7. Repeat Step 6 to check and select additional
tracks.
8. To remove a track from the list, move to the
track, and then press the OK button again.
The check on the track is removed.
9. When done, select Play, and then press the
OK button. The Track List screen appears
listing only the tracks you checked. The
selected tracks play automatically.
10. To cancel the Play Selected list, press the '
(RETURN) button or the e (EXIT) button. If
you press ' (RETURN), you return to the File
List screen. If you press e (EXIT), you go to
the Home screen.
35 - English
Playing Content
2. Select Play Selected, and then press the OK
button. The Play Selected screen appears.
3. Use the 78 buttons to select a track, and
then press the OK button. A check appears
to the left of the track.
4. Repeat Step 3 to select and check additional
tracks.
5. To remove a track from the list, move to the
track, and then press the OK button again.
The check on the track is removed.
6. When done, select Play on the bottom
left, and then press the OK button. The
Track List screen reappears listing only the
tracks you checked. The selected tracks play
automatically.
7. To cancel the Play Selected list, select Settings
( ) on the bottom left of the Track list
screen. On the Settings menu select Play All.
The Track List screen reappears with all tracks
on the CD listed.
- Use Clear All to deselect all selected tracks
at once. Then, select individual tracks or
use Select All to select all the tracks, and
then press the ' (RETURN) button on your
remote or select Play and then press the OK
button. If you do not use Select All or select
individual tracks, the Play Selected list will
not change.
Playing Content
✎✎ If you want to use Play Selected to watch
videos, use the Filter( ) function to select
Videos instead of Music.
Using Play Selected Starting from the
Home Screen
✎✎ Select PLAY DISC or MULTIMEDIA depending
on the media you are using.
- If you selected PLAY DISC, the Track List
screen appears. Use the Filter( ) function
to select Music, and then follow the
directions starting at Step 3 above.
- If you selected MULTIMEDIA, select Storage
or Network Device on the MULTIMEDIA
screen. Then, select your storage media on
the Storage screen or device on the Network
Device screen. The File List screen appears.
Use the Filter( ) function to select Music,
and then follow the directions starting at
Step 3 above.
Creating and Editing a Playlist Stored in
a Storage Device
8. On the on-screen keyboard, accept the
default name for the new playlist or enter
a new name. When finished, select Done,
press OK, and then go to Step 9.
9. Navigate to the screen that displays the
music you want to put into the playlist.
10. Use the 78:; buttons to select a track,
and then press the OK button. A check
appears in the check box on the left side of
the track icon.
11. Repeat Step 10 to check and select additional
tracks.
12. To remove a track from the list, move to the
track, and then press the OK button again.
The check on the track is removed.
13. When finished, select Add at the top of the
screen, and then press the OK button. The
playlist is saved to the USB device and the
Added pop-up appears. Press the OK button.
Playing a playlist
1. Connect the USB device with the playlist to
the home cinema's USB port.
Creating a playlist
2. Navigate to the playlist (Home screen ;
MULTIMEDIA ; Storage ; USB device ;
playlist).
1. Connect a USB device with stored music to
the home cinema's USB jack, and then turn
on the home cinema.
3. Select the playlist, and then press OK. The
Track List screen appears and the first track
of the playlist starts to play.
2. On the Home screen, select MULTIMEDIA,
and then press the OK button.
3. On the MULTIMEDIA screen, select Storage,
and then press the OK button.
4. Select the USB device, and then press the OK
button.
Editing a playlist
5. At the top of the screen, select Filter( ) ;
Music.
6. After the screen re-displays, select Options
( ) ; Add to Playlist.
7. On the next screen, select an existing playlist,
and then press the OK button.
OR
Select New Playlist, and then press the OK
button. If you selected an existing playlist, go
to Step 9. If you selected New Playlist, go to
Step 8.
1. While playing a playlist, select Settings
) ; Edit Playlist at the bottom-left corner
of the Track List screen.
(
2. Use the 78:; buttons to select a track,
and then press the OK button. A check mark
appears next to the track.
3. To cancel a selection, select the track again,
and then press the OK button.
✎✎ To select all tracks at once, use Select All. To
cancel all selections at once, use Deselect All.
36 - English
4. When finished, select Delete at the bottom
left of the screen, and then press the OK
button.
A confirmation pop-up appears.
5. Select Yes, and then press the OK button.
✎✎ Deleting all files included in a playlist will
10. If you want to cancel ripping after ripping
has begun, press the OK button and then
select Yes. Select No to continue ripping.
11. When ripping is complete, the "Successfully
ripped." message appears. Press the OK
button. The Track List screen reappears.
delete the playlist itself, too.
Using Bluetooth
✎✎ You can save up to 5 playlists.
Ripping
1. Insert a USB device into the USB jack on the
front of the product. This is the device you
will rip the files to.
3. On the Track List screen, select Settings
( ) on the lower left of the screen, and
then press the OK button. The Settings menu
appears.
4. Use the 78 buttons to select Ripping, and
then press the OK button. The Ripping screen
appears.
5. Use the 78 buttons to select a track, and
then press the OK button. A check appears
to the left of the track.
6. Repeat Step 5 to select and check additional
tracks.
✎✎ To select all tracks at once, select Select All on
the bottom left of the screen, and then press
the OK button.
7. To remove a track from the list, move to the
track, and then press the OK button again.
The check on the track is removed.
What is Bluetooth?
Bluetooth is a technology that enables Bluetoothcompliant devices to interconnect with each other
easily using a short, wireless connection.
~~ A Bluetooth device may hum or malfunction:
-- When a part of your body is in contact with
the receiving/transmitting system of the
Bluetooth device or the Home Cinema.
-- When it is subject to electrical variation from
obstructions caused by a wall, corner, or
office partitioning.
-- When it is exposed to electrical interference
from same frequency-band devices including
medical equipment, microwave ovens, and
wireless LANs.
~~ Pair the Home Cinema with the Bluetooth
device while the two are close together.
~~ The further the distance is between the Home
Cinema and the Bluetooth device, the worse
the quality is.
If the distance exceeds the Bluetooth
operational range, the connection is lost.
~~ In poor reception areas, the Bluetooth
connection may not work properly.
8. When done, select the Rip button using the
78 buttons, and then press the OK button.
The Rip pop-up appears.
9. Use the 78 buttons to select the device to
store the ripped files to, and then press the
OK button. Ripping begins.
✎✎ Do not disconnect the device while ripping is
in progress.
37 - English
Playing Content
2. Put a music CD into the home cinema. In a
few moments, the Track List screen appears.
You can use a Bluetooth device to enjoy music
with high quality stereo sound, all without wires!
Playing Content
~~ The Home Cinema has an effective reception
range of up to 10 meters in all directions if
there are no obstacles. The connection will be
automatically cut off if the device is out of this
range. Even within this range, the sound quality
may be degraded by obstacles such as walls or
doors.
~~ This wireless device may cause electrical
interference. during its operation.
To connect the Home Cinema to a Bluetooth
device
✎✎ The AVRCP feature is supported. It's
functionality will differ, depending on the
specifications of the connected device.
✎✎ Connect only to a Bluetooth device that
supports the A2DP Profile.
✎✎ Only one Bluetooth device can be paired at a
time.
✎✎ The search or connection functions may not
work properly in the following cases:
-- If there a strong electric field near or around
the home cinema.
-- If several Bluetooth devices are simultaneously
paired with product.
-- If the Bluetooth device is turned off, not in
place, or malfunctions.
Connect
Bluetooth device
Before you begin, confirm that the Bluetooth
device supports the Bluetooth compliant stereo
headset function.
1. Press the SOURCE button on the remote
control to display the BT message.
2. Select the Bluetooth menu on the Bluetooth
device you want to connect. For instructions,
refer to the Bluetooth device's manual.
3. Select the Stereo headset menu on the
Bluetooth device.
~~ You will see a list of devices.
4. Select "[HTS]Hxxxxx" from the searched list.
~~ When the Home Cinema is connected to
the Bluetooth device, the device name of
the connected Bluetooth device, followed
by the name of home cinema will appear
on the front display of home cinema.
5. Play music on the connected device.
~~ You can listen to the music playing on the
connected Bluetooth device over the Home
Cinema system.
✎✎ The Home Cinema only supports Middle
Quality SBC data (up to 237kbps@48kHz),
and does not support High Quality SBC data
(328kbps@44.1kHz).
-- Note that such devices as microwave ovens,
wireless LAN adapters, fluorescent lights, and
gas stoves use the same frequency range as
the Bluetooth device, and can cause electric
interference.
✎✎ For a more reliable connection to a Bluetooth
device or to other devices such as a smart
phone, we recommend you update the
device's software to the most current version.
To disconnect the Bluetooth device from the
Home Cinema
You can disconnect the Bluetooth device from
the Home Cinema. For instructions, refer to the
Bluetooth device's manual.
~~ When the Home Cinema is disconnected from
the Bluetooth device, the Home Cinema will
display DISCONNECTED on the front display.
To disconnect the Home Cinema from the
Bluetooth device
Press the (F) button on the front panel of the
Home Cinema to switch from BT to another mode
or turn off the Home Cinema.
~~ Except when you disconnect the Home Cinema
by changing functions, the connected Bluetooth
device will wait a certain time for a response
from the Home Cinema before terminating the
connection. (Disconnection time may differ,
depending on the Bluetooth device.)
38 - English
✎✎ In Bluetooth connection mode, the Bluetooth
connection will be lost if the distance
between the Home Cinema System and the
Bluetooth device exceeds 10 meters. When
the Bluetooth device comes back into effective
range or you restart the Bluetooth device,
you have to pair the device and home cinema
again to reconnect.
✎✎ In Bluetooth mode, the screen saver will start
if the Bluetooth device stays in the Ready state
for 5 minutes. To reconnect the Bluetooth
device, turn off the screen saver, and then
connect the device. To turn off the screen
saver, press any button on the remote control
(the Volume button, an 78:; buttons,
etc.).
When the home cinema is turned off, connecting
a previously connected smart device to the product
via a Bluetooth connection can turn the home
cinema on.
✎✎ The home cinema must be plugged in for
Quick Start to work.
✎✎ To use this function, set Settings > System >
Quick start to On.
✎✎ To use this function, the Bluetooth connection
between the Home cinema and your smart
device must have been established previously,
and the Home cinema must be on your smart
phone's list of known Bluetooth devices.
1. Connect your previously connected smart
device to the product via Bluetooth. (For
information on Bluetooth connections, refer
to your smart device’s manual.)
2. Once connected, the home cinema turns
itself on automatically in BT mode.
~~ Select the desired music to play on your
smart device.
Using NFC (Near Field Communication)
Connect your NFC compatible device via
Bluetooth to the Home Cinema using this simple
set-up procedure. You can play music from the
smart phone through the Home Cinema.
2. Gently touch the NFC logo N on the top of
the Home Cinema with the NFC supported
device.
~~ If the Home Cinema is off, it will turn on
automatically.
3. A pop-up asking whether to proceed with
the Bluetooth connection appears on the
smart phone. Select 'Yes'.
~~ When the connection is complete, the
'connected' message appears.
4. To disconnect the NFC device, touch the
device to the Home Cinema's top panel
again.
~~ To connect another NFC device while the
first smart phone is still connected, touch
that device to the Home Cinema's top
panel. The Home Cinema will disconnect
the first smart phone and connect to the
second smart phone.
✎✎ The NFC function is built into Android devices
running Android OS 4.1 Jellybean or later.
-- If your device is running an Android OS
earlier than Android OS 4.1 Jellybean,
you must download the 'Samsung NFC
Connection' application from Android
market to use the NFC function.
✎✎ The position of the NFC antenna differs on
smart phones. Check where the NFC antenna
is located before connecting. Refer to the
user manual of your mobile phone to check
the antenna’s location before making the
connection.
✎✎ If your smart phone is
covered with a thick case, the
Note2
connection may not succeed.
✎✎ The N is a trademark or
S3/S4
registered trademark of NFC
Note3
Forum, Inc. in the United States
and in other countries.
✎✎ NFC tagging for Bluetooth connection cannot
be established while powering on and off.
✎✎ NFC tagging for Bluetooth connection will not
work while the battery indicator is blinking.
39 - English
Playing Content
Using Bluetooth Power On
1. Turn on the NFC function on the smart phone
and make sure the screen lock function on
the smart phone is off. The smart phone's
NFC function will not work if screen lock is on.
Playing Content
Playing Photo Contents
Send
You can play photo contents located on a DVD,
USB, mobile device, or PC.
Using the Tools Menu
While displaying a photo, press the TOOLS button
on the remote.
Select Settings(T) in the upper right corner of
the screen, and then press the OK button. The
Tools menu drop down list appears.
Select Send to upload selected files to on-line
sites (Picasa, Facebook, etc.) or devices. To use
Send with an on-line site, you need to establish
an account with the on-line site, and then
log in using the Log In function. Send works
essentially the same way for music, photos, and
videos. For general instructions, see "Using the
Send Function" on page 41.
Information
Displays the picture information.
Slideshow Settings
`` Speed : Select to set a slide show's speed.
`` Effects : Select to set a slide show's special
effects.
Rotate
Select to rotate the picture. (This will rotate the
picture either clockwise or counter clockwise.)
Zoom
Select to enlarge the current picture. (Enlarge
up to 4 times)
Picture Mode
✎✎ Depending on the disc or storage device, the
Options menu may differ. All options may not
be displayed.
✎✎ To enable the Background Music function, the
photo file must be in the same storage media
as the music file. However, the sound quality
can be affected by the bitrate of the MP3
file, the size of the photo, and the encoding
method.
✎✎ You can't enlarge the subtitle and PG graphic
in the full screen mode.
Using the Sort By and Options Menus
When the Photo File List is Displayed
`` Dynamic : Choose to increase sharpness.
`` Standard : Choose for most viewing
applications.
`` Movie : This is the best setting for watching
movies.
`` User : Lets you adjust the sharpness and
noise reduction function respectively.
Select the Filter( ) function, and then Photos to
display photos only.
Background Music
On the screen that lists the photo files, use the
78:; buttons to select Sort By or Options in
the upper right, and then press the OK button.
Select to listen to music while viewing a slide
show.
✎✎ Even though the product will display folders
that contain all content types, it will only
display files of the content type you selected
For example, if you selected Photos, you will
only be able to see photo files.
Photos
Equaliser Mode
Set to On to use the equalizer. Customize your
own personal sound preferences using the
equalizer settings.
Equaliser Settings
This function is only available when Equaliser
Mode is On.
Sort By
`` Date
Groups all the photo files on the media or
storage device by date. Click a group to see
the photos in that group.
`` Title
Displays all the photo files on the media or
storage device by title.
`` Folder
Displays all the folders on the media or
storage device.
40 - English
Listening to the Radio
Options
✎✎ Depending on the disc or storage device, the
Options menu may differ. All options may not
be displayed.
Using the Send Function
1. Use the 78 buttons to select Send, and
then press the OK button. The Selection
screen appears.
2. Use the 78 buttons to select a picture, and
then press the OK button. A check appears
to the left of the picture.
3. Repeat Step 2 to select and check additional
pictures.
4. To remove a picture from the list, move to
the picture, and then press the OK button
again. The check on the picture is removed.
5. When done, press the 78 button to select
Send, and then press the OK button. The
Send pop-up appears listing the on-line sites
(Picasa, Facebook, etc.) or devices that you
can send the photos to.
6. Select a destination, and then press the OK
button.
7. If you are sending the photos to an on-line
site, the site starts. Log in and follow the
directions on the screen.
✎✎ To send photos to an on-line site, you must
~~ To listen to the radio, you must connect the
supplied FM antenna.
Operating the Radio with the Remote
Control
1. Press the SOURCE button to select FM.
2. Tune to the desired station.
~~ Preset Tuning 1 : Press the PRESET button
to select PRESET, and then press the 78
buttons to select a preset station.
-- Before you can tune to preset stations,
you must add preset stations to the
product's memory.
~~ Manual Tuning : Press the PRESET button
to select MANUAL, and then press the
78 buttons to tune to a lower or higher
frequency.
~~ Automatic Tuning : Press the PRESET
button to select MANUAL, and then press
and hold the 78 buttons to automatically
search the band.
Setting Mono/Stereo
Press the ST/MO button.
~~ Each time you press the button, the sound
switches between STEREO and MONO.
~~ In a poor reception area, select MONO for a
clear, interference-free broadcast.
Presetting Stations
Example : Presetting FM 89.10 into memory.
1. Press the SOURCE button to select FM.
2. Press the 78 buttons to select <89.10>.
3. Press the MEMORY button.
~~ NUMBER flashes on the display.
4. Press the MEMORY button again.
~~ Press the MEMORY button before
NUMBER disappears from the display on its
own.
~~ After you press the MEMORY button,
NUMBER disappears from the display and
the station is stored in memory.
have an account with that site.
41 - English
Playing Content
`` Slide Show
Starts the slide show. Shows all the files in
the current folder, one after another. If you
want to create a slide show with a selected
group of photos, see Play Selected below.
`` Play Selected
Play Selected lets you select specific files to
play. It works essentially the same way for all
media. See "Using Play Selected with SelfRecorded Media (CDs, USB Devices, etc.)" on
page 35.
`` Send
Select Send to upload selected files to on line
sites (Picasa, Facebook, etc.) or to devices.
To use Send with an on-line site, you need
to establish an account with the on-line site,
and then log in using the Log In function.
Playing Content
5. To preset another station, repeat steps 2 to 4.
~~ To tune to a preset station, press the
PRESET button to select PRESET, and then
press the 78 buttons to select the preset
station.
Using the Special Effects Remote
Control Buttons
ĞĞ
Sports
zzAnnouncer : Emphasizes the commentator's
voice during a sports game to increase your
absorption in the game.
zzStadium : Emphasizes spectators' cheering
during a sports game to add immediacy.
zzOff : Select for normal listening.
DTS Neo:Fusion II / 3D Sound
SOUND EFFECT Function
Lets you select a mode that optimizes the
sound.
1. Press the SOUND EFFECT button.
2. P
ress the 78 buttons to select the desired
mode: DSP, Virtual Surround, SFE Mode, or
Sports.
3. P
ress the :; buttons to select the desired
sound effect.
ĞĞ
You can enjoy more natural and vivid surround
sound with enriched tones by adjusting the
depth of sound using the level options.
~~ DTS Neo:Fusion II : Off  On
~~ 3D Sound (HT-H7500WM only) :
Off  High  Low
✎✎ 3D Sound is not available in FM mode.
✎✎ The 3D Sound is displayed only if you
DSP
zzMP3 Enhancer : Helps enhance your sound
experience (ex. mp3 music). You can upscale
your MP3 level sound (24 kHz, 8bit) to CD
level sound (44.1 kHz, 16bit).
zzPower Bass : Increases the volume level of
bass tones and provides thudding sound
effects.
zzVirtual 7.1 (HT-H7500WM only) : Creates a
virtual 7.1 CH sound using the 5.1 CH speaker
system.
zzOff : Select for normal listening.
ĞĞ
Virtual Surround
You can set a two-channel input source to
produce sound in 5.1 channel surround mode.
ĞĞ
SFE Mode
zzSymphony Hall in Boston (Hall 1) : Provides a
clear vocal as if listening in a concert hall.
zzPhilharmonic Hall in Bratislava (Hall 2) :
Also provides a clear vocal as if listening in a
concert hall, but less powerful than HALL1.
zzJazz Club in Seoul B : Recommended setting
for Jazz.
zzChurch in Seoul : Gives the feel of being in a
grand church.
zzAmphitheater (Rock) : Recommended setting
for Rock.
zzOff : Select for normal listening.
42 - English
selected Simple Speaker Setup > Simple
Mode.
Network Services
You can enjoy various network services such as
streaming video or on-line apps by connecting the
product to your network.
To use network services, you must first:
button after you have
logged in, the Sign In screen appears. You
can select Link Accounts, Edit profile, Remove
Account, and Sign out.
Adding a Credit Card
1. Connect the product to a network.
(See page 14)
To add a credit card to your account, follow these
steps:
2. Configure the network settings.
(See pages 22~24)
1. Select the
in the upper right of the Home
Screen, and then press the OK button. The
Account Sign In screen appears.
Logging In to Your Samsung
Account
Before you access FILMS AND TV SHOWS or
SAMSUNG APPS, we suggest you log in to your
Samsung account.
✎✎ If you do not have a Samsung account, create
one by selecting Create Account.
1. With the Home screen displayed, press the
button. The Sign In screen appears.
2. Select the ID field, and then press the OK
button. The keyboard pop-up appears.
3. Using the keyboard, enter your e-mail
address. When finished, select the Done
button, and then press the OK button. The
Sign In screen re-appears.
4. Select the Password field, and then press the
OK button. The keyboard pop-up appears.
5. Using the keyboard, enter your password.
When finished, select the Done button, and
then press the OK button. The Sign In screen
re-appears.
6. To make the log in process easier next time,
select Sign me in automatically, and then
press the OK button.
7. Select Sign In, and then press the OK button.
8. The Samsung account Terms and Conditions
screen appears.
9. Select I agree, and then press the OK button.
10. Select an image you want to use to identify
your account, and then press the OK button.
11. Select Done.
2. Sign in to your account if you are not signed
in. The Home Screen reappears. If you are
already signed in, go to Step 4.
3. Select the
again, and then press the OK
button. The Account Sign In screen appears.
4. On the Account Sign In screen, select Edit
profile, and then press the OK button. The
on-screen keyboard appears.
5. Enter your account password. When finished,
select Done, and then press the OK button.
The Edit profile screen appears.
6. Select Add Card, and then press the OK
button. The Add Card pop-up appears.
7. Read the Add Card text, and then press the
OK button. The Add Card screen appears.
8. Enter the requested credit card information.
When done, select Save, and then press the
OK button.
Before Using FILMS AND TV
SHOWS or SAMSUNG APPS
If you haven’t set up Smart Hub, when you use
FILMS AND TV SHOWS or SAMSUNG APPS for
the first time, the product will ask you to perform
the Smart Hub set up procedure.
1. On the Home screen, select either FILMS AND
TV SHOWS or SAMSUNG APPS, and then press
the OK button.
2. If you selected FILMS AND TV SHOWS, the
Smart Hub pop-up appears asking if you
want to set up Smart Hub. Select Yes, and
then press the OK button. The Welcome
screen appears.
the next time you log in, the product will
automatically enter your e-mail and password.
All you need to do is select Sign In.
43 - English
Network Services
To create a Samsung account, follow these steps:
✎✎ If you selected Sign me in automatically,
✎✎ If you press the
Network Services
3. Select Start, and then press the OK button.
The Smart Hub Terms & Conditions, Privacy
Policy screen appears.
4. On the Additional Services and Options
screen, you must review and agree to both
the Smart Hub Terms and Conditions and the
Privacy Policy to use Smart Hub.
5. Scroll down, and then click the View details
buttons to review the full documents.
✎✎ You do not need to consent to the
Supplemental Privacy Notice, but one or more
Smart TV features or functionalities may not
be available if you do not.
6. Select I agree to all, and then press the OK
button. The Setup Complete screen appears.
Press the OK button.
Using FILMS AND TV SHOWS
Through the FILMS AND TV SHOWS screen, you
can stream movies and TV shows and watch them
on your TV.
To stream and watch most movies and TV shows,
you need a Samsung account with a registered
credit card. To register a card, see page 43.
✎✎ Depending on your country, this menu
function may not be supported.
NEWLY ADDED
Featured
3. If you have downloaded and installed one of
the video streaming apps that you can use
to stream the movie or show, select Watch
Now, and then press the OK button. The
app launches. Follow the directions on the
screen to watch the movie or show you have
chosen. If you have not downloaded one of
the apps, go to Step 4.
4. If you have not downloaded one of the video
streaming apps, Watch Via appears on the
screen instead of Watch Now. Select one
of the video streaming apps to the right of
Watch Via, and then press the OK Button.
5. You will be asked if you want to install the
app now. Select Install, press the OK button,
and then follow the directions on the screen
to install the app. You can also select View
Details to view information about the app.
The View Details screen lets you download
the app as well.
FILMS AND TV SHOWS
Favourites
2-1.Alternately, select Favourites, Featured,
Movies, TV Shows, Trailers or Trending and
then press the OK button.
On the page that appears, use the 78:;
buttons to select a show, movie, or trailer,
and then press the OK button.
On the Movies or TV Shows screen, you can
also select What’s New or Genres to see
more available shows or films. On the Genres
screen, use the 78:; buttons to select a
genres, and then press the OK button.
To make a selection on a page displaying
movies or TV shows, use the 78:;
buttons to make a selection, and then press
the OK button.
Movies
TV Shows
Trailers
Trending
1. On the Home screen, select FILMS AND TV
SHOWS, and then press the OK button.
2. Select one of the Recommended Movies or
TV Shows, and then press the OK button.
The Information screen for that movie
appears.
6. Once the app is installed, select Play, and
then press OK to launch the app. Alternately,
you can press the ' (RETURN) button to go
back to the FILMS AND TV SHOWS screen,
select the show or movie again, and then
follow the directions in Step 3 to watch the
movie or show.
✎✎ Contents items and the corresponding
bottom menu in FILMS AND TV SHOWS differ
between countries.
✎✎ As you highlight each movie or TV show, the
icons for the apps you can use to stream the
movie or show appear at the bottom of each
movie or show selection icon.
44 - English
✎✎ On the each movie or show information
screen, the Watch Now button is displayed
only after you have download one of the video
streaming apps you can use to stream that
particular movie or show. Watch Via appears if
you have not downloaded the necessary video
streaming app. To the right of Watch Via is a
listing of the video streaming apps you can use
to stream the movie or show. Select an app
icon to download and install the app.
✎✎ Favourites will not appear unless you have
tagged one or more films or TV shows as
a favourites. To tag a movie or show as a
favorite, select the show. The Detail screen
appears. Select the heart symbol, and then
press the OK button.
Using SAMSUNG APPS
✎✎ While playing multimedia content in SAMSUNG
APPS, press and hold 5 button on the remote
to pause playback. To stop playback, press and
hold e (EXIT) button on the remote.
The SAMSUNG APPS Screen at a Glance
1
2
RECOMMENDED
2
3
4
5
2
3
4
5
MY APPS
WebBrowser
The first time you open the SAMSUNG APPS
screen, the Home cinema automatically
downloads a group of free apps. Once these
apps have been downloaded, they appear on the
SAMSUNG APPS screen. To see additional apps,
select Most Popular, What's New, or Categories
on the bottom of the screen, and then press the
OK button.
Most Popular displays the most popular apps,
What's New the newest. Categories displays a
series of icons representing categories such as
Video, Game, and Sports. Select a category icon,
and then press the OK button. The Home cinema
displays the apps in that category.
Downloading an App
1. Select Most Popular, What's New, or
Categories, and then press the OK button.
2. If you selected Categories, select a category
icon, and then press the OK button.
Otherwise, go to Step 3.
✎✎ On the Most Popular, What's New, and
Categories screens, a green arrow is displayed
on apps you have already downloaded.
3. Select an app you want to download,
and then press the OK button. The Detail
Information screen for the App appears.
4. Select the Download button on the screen,
and then press the OK button. Download
changes to Cancel and the app begins to
download.
SAMSUNG APPS
1
Most Popular, What’s New and Categories
: Select to view and download additional
apps.
6
Most Popular What's New
7
8
9
10
5. If you want to cancel the download, select
Cancel, and then press the OK button.
6. When the download is complete, Cancel
changes to Play. Select Play, and then press
the OK button to start the application.
Alternately, press the ' (RETURN) button
until the SAMSUNG APPS screen reappears.
The app you downloaded will be displayed
on the App screen under MY APPS.
Categories
3
RECOMMENDED : Displays recommended
contents managed by Samsung. You
cannot delete Recommended Apps.
Starting an Application
1
2
MY APPS : Displays your personal gallery
of applications modifiable on the MY
APPS screen.
2. On the SAMSUNG APPS screen, use the
78:; buttons to select an app, and then
press the OK button. The app starts.
1. Select SAMSUNG APPS on the Home screen,
and then press the OK button.
45 - English
Network Services
Through the SAMSUNG APPS screen, you can
download applications from the Internet, and
launch and run downloaded applications on your
TV. To access some applications, you need to have
a Samsung account.
3
Network Services
The Option Menu
The Option menu lets you add apps to and delete
apps from MY APPS. It also lets you change the
position of an app in MY APPS and update apps.
Move
1. On the MY APPS screen, select the app you
want to move, and then press the OK button
for 3 seconds. The Option menu appears.
2. Select Move, and then press the OK button.
3. Use the 78:; buttons to move the app.
4. When the app is where you want it, press the
OK or e (EXIT) button.
Delete
1. On the MY APPS screen, select the app you
want to delete, and then press the OK button
for 3 seconds. The Option menu appears.
2. Select Delete, and then press the OK button .
3. Use the :; buttons to select OK, and then
press the OK button.
Delete Multiple
1. On the MY APPS screen, select an app you
want to delete and then press the OK button
for 3 seconds. The Options menu appears.
2. Select the Delete Multiple, and then press
the OK button.
3. Use the 78:; buttons to select apps
you want to delete, and then press the OK
button.
4. Use the 8 button to select Delete, and then
press the OK button.
View Details
1. On the MY APPS screen, select the app you
want to see detailed information for, and
then press the OK button for 3 seconds. The
Option menu appears.
2. Select View Details, and then press the OK
button.
Change View
1. On the MY APPS screen, select an app, and
then press the OK button for 3 seconds. The
Option menu appears.
2. Select Change View, and then press the OK
button. If the current view is Most Played,
you will be asked if you want to change to
Custom View. If the current view is Custom
View, you will be asked if you want to
change the view to Most Played. Most Played
sorts the apps by the number of times you
ran each app. Custom View lets you arrange
the apps to your liking.
3. Select OK, and then press the OK button to
change the view.
Lock/Unlock
Locking an app makes it more difficult to delete
accidently.
1. On the MY APPS screen, select the app you
want to lock, and then press the OK button
for 3 seconds. The Option menu appears.
2. Select Lock/Unlock, and then press the OK
button.
3. The PIN input pop-up appears. Enter your
PIN. Press and hold the 123 button until the
Num pad appears on the screen. When the
Num pad appears, select a number using the
button and then press the OK button.
,.
If you haven't set a PIN, enter the default
PIN: 0000.
4. A checkbox appears on each app icon. Use
the 78:; button to move to the app you
want to lock, and then press the OK button
to select it. A check mark appears on the
icon.
5. Repeat Step 4 to select other apps. Use
Select All or Deselect All on the bottom of
the screen to select or deselect all apps at
once. To deselect individual apps, select the
app again, and then press the OK button.
The check mark disappears.
6. When you have finished marking your
selections, move to Lock on the bottom of
the screen, and then press the OK button.
7. A lock mark appears on the selected app’s
icon. You will be prompted to enter the PIN
number to delete or unlock a locked app.
Update Apps
1. On the MY APPS screen, select any app, and
then press the OK button for 3 seconds. The
Option menu appears.
2. Select Update Apps, and then press the OK
button.
46 - English
3. The Update Apps screens lists all the apps
that have updates available. Select each app
you want to update, and then press the OK
button. You can also choose Select All to
update all the apps listed.
4. Select Update, and then press the OK button.
Screen Mirroring
The Screen Mirroring function lets you view the
screen of your smart phone or android tablet on
the TV you have connected to the product.
1. In the Home screen, select Screen Mirroring,
and then press the OK button.
2. Launch AllShare Cast or Screen Mirroring on
your device.
3. On your device, find the name of the product
in the list of available devices and then select
it.
5. In a few moments, the screen of your device
appears on the TV screen.
6. To stop Screen Mirroring, press the e
(EXIT) or ' (RETURN) button on the remote
control, or exit the Screen Mirroring function
on your smart phone.
✎✎ You can connect to a device that supports
AllShare Cast. Note that all devices that have
AllShare Cast may not be fully supported,
depending on the manufacturer. For further
information on mobile connection support,
refer to the manufacturer’s web site.
✎✎ When you are using the Screen Mirroring
function, video stuttering or audio dropouts
may occur, depending on your environment.
✎✎ Bluetooth transmissions can interfere with
the Screen Mirroring signal. Before using
the Screen Mirroring function, we strongly
recommend that you turn off the Bluetooth
function on your smart phone or smart device
(tablet, etc.).
Using the Web Browser
✎✎ When you run the Web Browser with the
product connected by HDMI to a BD Wise
compatible TV - and BD Wise is on - the
browser is maximized to fill the screen and the
TV's resolution is set to the optimal resolution
automatically.
✎✎ The Web Browser is not compatible with Java
applications.
✎✎ If you attempt to download a file, and the file
cannot be saved, an error message will appear.
✎✎ E-commerce (purchasing products online) is
not supported.
✎✎ ActiveX is not supported.
✎✎ Access may be blocked to some websites or to
web browsers operated by certain businesses.
Link Browsing and Pointer Browsing
The Web Browser provides two types of browsing,
Pointer Browsing and Link Browsing. When you
launch the browser for the first time, Pointer
Browsing is active. If you are using a mouse to
navigate in the Web Browser, we recommend
leaving Pointer Browsing active. With Pointer
Browsing, you move the pointer using the
directional arrow keys on your remote. The pointer
moves freely around the screen, much like the
pointer on a computer when you use a mouse.
With Link Browsing, you use the directional arrow
keys to move a highlight from one link, button, or
entry field to the next. The highlight is restricted
to the links, buttons, and entry fields.
To activate Link Browsing, follow these steps:
1. Use the 78:; buttons on your remote to
move the pointer to the Link Browser icon on
the top right of the screen. The Link Browser
icon is the third icon from the right.
The pointer will be in the correct position
if the icon turns blue and the words “Link
Browsing” appear on the screen.
2. Press the OK button. Link Browsing is
activated and will remain active whenever
you bring up the Web Browser or until you
change to Pointer Browsing.
You can access the Internet using the Web
Browser application.
1. Select SAMSUNG APPS on the Home screen
and then press the OK button.
47 - English
Network Services
4. The TV displays a connecting message (for
example, Connecting to Android_92gb...)
and then displays the connected message.
2. On the SAMSUNG APPS screen, select
WebBrowser, and then press the OK button.
Network Services
The Control Panel at a Glance
Using the Keyboard Pop-up
The Control Panel, which runs across the top
http://www.samsung.com
of the screen,
has a series of icons which start
a number of useful functions. The icons are
described below, starting with the icon on the far
left of the screen.
When you click the http://www.samsung.com , the
or 100%
access a data or text entry
field, and then press the OK button, the keyboard
pop-up appears.
http://www.samsung.com
http://www.samsung.com
100%
100%
As you enter characters, recommended text will be shown.
Caps
1
2
3
4
5
6
7
8
9
0
q
w e
r
t
y
u
i
o
p
^
*

j
k
l
~
@
!
Done
,
.
?
-
 


Cancel
/
123#& a
s
d
f
g
h
z
x
c
v
b
n
ENG
http://www.samsung.com
: Moves to the
previous page.
: Moves tohttp://www.samsung.com
the next web page.
http://www.samsung.com
: Displays
the Bookmarks and History
screen. You can bookmark the current page,
select an existing bookmark, and edit and
delete bookmarks. You can also view your
browsing history and select a page to revisit.
http://www.samsung.com
: Moves
to the Home screen of the Web
~~
Browser.
~~ http://www.samsung.com : Lets you enter a page
address manually using the keyboard popup.
: Reloads the current 100%
page so that it is
~~
refreshed on the screen.
: Adds the current 100%
page to your
~~
bookmarks.
100%you search for
: Lets
~~
information by entering words or characters
using the keyboard pop-up. See Using the
Keyboard Popup on this page.
~~ 100% : Lets you enlarge or shrink the screen
by various percentages.
: Lets you switch between Pointer
/
~~
Browsing and Link Browsing.
: Lets you configure the Browser’s settings.
~~
See “Using the Settings Menu” on page 49.
: Closes the Web Browser.
~~
~~
~~
~~
100%
100%
100%
m
www. .com
Clear
:
To use the keyboard pop-up with your remote,
follow these steps:
100%on your remote to
1. Use the 78:; buttons
100%
move the highlight to
a letter or number of
your choice. 100%
2. Press the OK button to enter the letter or
number into the entry field.
3. To access capital letters, move the highlight
to the Caps key on the top left, and then
100%
press the OK button. Press the OK button
again with the Caps key highlighted to access
100%
small letters
again.
4. To access symbols and additional punctuation
marks, highlight the 123#& button on the
left, and then press the OK button.
5. To delete a character you entered, move the
highlight to the : button, and then press the
OK button.
6. To delete all the characters you entered,
move the highlight to the Clear button, and
then press the OK button.
7. When finished entering, move the highlight
to the Done button, and then press the OK
button.
✎✎ If you have a wireless keyboard connected
to your product, you can use the wireless
keyboard to enter letters, numbers, symbols,
and punctuation. Note that the wireless
keyboard will work only when the keyboard
popup appears and can only be used to enter
letters, numbers, symbols, and punctuation.
48 - English
Options on the Keyboard Pop-Up
100%
To access the keyboard pop-up options, highlight
the
button on the bottom left of the keyboard,
and then press the OK button.
Language
Select the language for the keyboard. You can
select English, French, Russian, etc.
Recommend text
The keyboard suggests recommended words as you
enter text. You can turn this function On or Off.
Reset recommended text data
Reset erases the Samsung Keyboard's memory.
Select OK to erase everything that the Samsung
Keyboard has learned about your writing style,
including any new words you have used.
Accented Character Preview
Select if you want to type letters with accent
marks.
Using the Settings Menu
100%
The Settings menu contains functions that control
how the Browser operates and Browser security
functions. To open the Settings menu, highlight
the
icon in the Control Panel, and then press
the OK button. To select an option in the Settings
menu, highlight the option, and then press the
OK button.
http://www.samsung.com
100%
Enable Grabbing
Approved Sites
Private browsing on
Set Search Engine
Web Browser Settings
Help
Turns the Grabber function on and off. When
the Grabber function is on, you can move a
web page up and down without dragging the
scroll bar. The Grabber function is only available
in Pointer Browsing.
Approved Sites
Lets you restrict your children’s access to
inappropriate web pages by allowing access
only to the web sites you have registered.
Every time you access this function, the PIN
screen appears. Press and hold the 123 button
until the Num pad appears on the screen. When
the Num pad appears, select a number using the
button and then press the OK button.
,.
The first time you access this function, enter
the default PIN, 0000.
You can change the PIN using the Reset
password for the Approved Sites function. See
below.
`` Approved Sites feature : Turns the Approved
Sites function on or off.
`` Reset password for Approved Sites : Change
the Approved Sites password.
`` Add current site : Lets you add the currently
displayed web site to the Approved Sites list.
`` Manage Approved Sites : Lets you key in
URLs to add to the Approved Sites List and
delete sites from the Approved Sites list. If
you turn this function on and have not added
any sites to the Approved Sites list, you will
not be able to access any Internet sites.
Private browsing on/off
Enable or disable the Privacy mode. When the
Privacy mode is enabled, the browser does not
retain the URLs of sites you visit. If you want to
enable Privacy mode, select OK.
If the Privacy mode is running, the “Stop” icon
appears in front of the URL at the top of the
screen. To disable Privacy mode, select it again
when Privacy mode is enabled.
Set Search Engine
You can set the desired Search Engine.
Close
49 - English
Network Services
Predict Next Letter
The keyboard will predict the next letter as you
enter letters. The predictions appear in a ring
around the letter you have just entered. You
can select a predicted letter or move to another
letter. You can turn this function On or Off.
Enable/Disable Grabbing
Network Services
Web Browser Settings
`` Set as homepage : You can set the Browser's
home page.
`` Pop-up Block : Turns the Pop-up Block on
and off.
`` Page Block : You can determine whether to
block advertisements and select the URLs for
which advertisements are blocked.
`` General : You can delete personal in
information such as website history and
browsing data (cookies, etc.), and reset
all web browser settings to their factory
defaults. You can also set the Security Mode.
✎✎ Set the Security Mode to On to avoid
accessing malicious/phishing sites and
prevent malicious code from running.
`` Encoding : You can set the Encoding setting
for web pages to Automatic or select the
encoding format manually from a list.
`` Pointer : You can set the speed of the cursor
when the cursor is set to Pointer Browsing.
`` Browser Information : Displays the version
number and copyright information for the
Web Browser.
2. After you have logged in, select the
button again, and then press the OK button.
3. Select Link Accounts in the My Account
screen, and then press the OK button.
4. On the Link Accounts screen, select the
service you want to link to the product, and
then press the OK button.
5. In the ID and Password screen, enter the ID
you use to log in to the service you selected
using the pop-up keyboard. When finished,
select Done, and then press the OK button.
6. Repeat the same process for the password.
When finished select Done, and then press
the OK button.
7. Select OK, and then press the OK button.
BD-LIVE™
Once the product is connected to your network,
you can enjoy various movie-related service
contents available on BD-LIVE compliant discs.
Help
1. Attach a USB flash drive to the USB jack on
the front of the product, and then check
its remaining memory. The memory device
must have at least 1GB of free space to
accommodate the BD-LIVE services.
Provides basic information about the operation
of the Web Browser.
2. Select Settings on the Home screen, and
then press the OK button.
✎✎ Depending on the web site, some of the
Web Browser Settings functions may not be
activated. Functions that are not activated are
greyed out and cannot be used.
Linking your Internet Service
Accounts to the Product
3. Select Network, and then press the OK
button.
4. Select BD-Live Settings, and then press the
OK button.
5. Select BD Data Management, and then press
the OK button.
6. Select Select Device, and then press the OK
button.
The Link Accounts function lets you link your
product to your accounts with Internet services
such as Pandora so that the product can log you
in to the service automatically when you start the
app for that service.
To create a service account link, follow these
steps:
1. On the Home screen, select the
button in
the upper right corner, and then press the OK
button to log in to your Samsung Account.
7. Select USB device, and then press the OK
button.
8. Insert a Blu-ray Disc that supports BD-LIVE.
9. Select an item from the list of BD-LIVE service
contents provided by the disc manufacturer.
✎✎ The way you use BD-LIVE and the provided
contents may differ, depending on the disc
manufacturer.
50 - English
Appendix
Additional Information
Digital Output
Notes
Connections
HDMI OUT
~~ Certain HDMI output resolutions may not work,
depending on your TV.
~~ You must have an HDMI connection to enjoy
videos with 3D technology.
~~ A long HDMI cable may cause screen noise. If
this occurs, set HDMI Deep Colour to Off in the
menu.
Settings
3D Settings
TV Aspect Ratio
~~ Depending on the disc type, some aspect ratios
may not be available.
~~ If you select an aspect ratio and option which is
different than the aspect ratio of your TV screen,
the picture might appear to be distorted.
~~ If you select 16:9 Original, your TV may display
4:3 Pillarbox (black bars on the sides of the
picture).
BD Wise (Samsung Products only)
~~ When BD Wise is On, the Resolution setting
automatically defaults to BD Wise and BD Wise
appears in the Resolution menu.
~~ If the product is connected to a device that does
not support BD Wise, you cannot use the BD
Wise function.
~~ For proper operation of BD Wise, set the BD
Wise option in both the product and the TV to
On.
BD-Live Internet Connection
~~ The Internet connection may be restricted while
you are using BD-LIVE contents.
Anynet+ (HDMI-CEC)
~~ Depending on your TV, certain HDMI output
resolutions may not work. Please refer to the
user manual of your TV.
~~ This function is not available if the HDMI cable
does not support CEC.
~~ If your Samsung TV has an Anynet+ logo, then it
supports the Anynet+ function.
BD Data Management
~~ In the external memory mode, disc playback may
be stopped if you disconnect the USB device in
the middle of playback.
~~ Only those USB devices formatted in the FAT file
system (DOS 8.3 volume label) are supported.
We recommend you use USB devices that
support the USB 2.0 protocol with 4 MB/sec or
faster read/write speeds.
~~ The Resume Play function may not work after
you format the storage device.
~~ The total memory available to BD Data
Management may differ, depending on
conditions.
DivX® Video On Demand
~~ For more information about DivX(R) VOD, visit
“http://vod.divx.com”.
51 - English
Appendix
~~ For some 3D discs, to stop a movie during 3D
playback, press the e (EXIT) button once. The
movie stops and the 3D mode option is deactivated.
To change a 3D option selection when you are
playing a 3D movie, press the e (EXIT) button
once. The Blu-ray menu appears. Press the e
(EXIT) button again, then select 3D Settings in
the Blu-ray menu.
~~ Depending on the content and the position
of the picture on your TV screen, you may see
vertical black bars on the left side, right side, or
both sides.
~~ Be sure to select the correct Digital Output or
you will hear no sound or just loud noise.
~~ If the HDMI device (AV receiver, TV) is not
compatible with compressed formats (Dolby
Digital, DTS), the audio signal outputs as PCM.
~~ Regular DVDs do not have BONUSVIEW audio
and Navigation Sound Effects.
~~ Some Blu-ray Discs do not have BONUSVIEW
audio and Navigation Sound Effects.
~~ This Digital Output setup does not affect the
analogue (L/R) audio or HDMI audio output to
your TV.
It affects the optical and HDMI audio output
when your product is connected to an AV
receiver.
~~ If you play MPEG audio soundtracks, the audio
signal outputs as PCM regardless of your Digital
Output selections (PCM or Bitstream).
~~ Digital Output can be activated when Sound
Output is set to TV Speaker.
Appendix
Front Display
Playing JPEG files
~~ You cannot change the brightness of the
button and the VOL +, - button.
~~ You can’t enlarge the subtitle and PG graphics in
the full screen mode.
Playing Content
Speaker Settings
5V 0.5A
~~ When Sound Output is set to TV Speaker, audio
is produced by the TV speakers.
Using the TOOLS button while playing back
pictures
HDMI audio
~~ If the home cinema is connected to a BD Wise
compliant TV that has BD Wise On, the Picture
Settings menu will not appear.
~~ The Background Music function will not work
unless the music file and the photo file are
located on the same storage media. Also, sound
quality can be impacted by the bitrate of the
MP3 music file, the size of the photos, and the
encoding method.
~~ When HDMI audio is output to the TV speakers,
it is automatically down-mixed to 2 channels.
Audio Return Channel
~~ When Anynet+ (HDMI-CEC) is Off, the Audio
Return Channel function is not available.
~~ Using an HDMI cable not certified for
ARC (Audio Return Channel) may cause a
compatibility problem.
~~ The ARC function is only available if an ARCcompliant TV is connected.
Playback
Disk and Format Compatibility
Disc types and content your Product
can Play
Playing Video files
~~ Video files with high bitrates of 20Mbps or more
strain the product’s capabilities and may stop
playing during playback.
Media
Selecting the Subtitle Language
~~ Depending on the Blu-ray Disc/DVD, you may be
able to change the subtitle language in the Disc
Menu. Press the DISC MENU button.
~~ This function depends on the selection of
subtitles that are encoded on the disc and may
not be available on all Blu-ray Discs/DVDs.
~~ Information about the main feature BONUSVIEW
mode will also appear if the Blu-ray Disc has a
BONUSVIEW section.
~~ This function changes both the primary and
secondary subtitles at the same time.
~~ The total number of primary and secondary
subtitles, respectively, is displayed.
Details
Blu-ray Disc BD-ROM or BD-RE/-R
disc recorded in the BD3D Blu-ray Disc RE format.
Selecting the Audio Language
~~ The ◄► indicator will not appear on the screen
if the BONUSVIEW section does not contain any
BONUSVIEW audio settings.
~~ The languages available through the Audio
Language function depend on the languages
that are encoded on the disc. This function or
certain languages may not be available.
~~ Some Blu-ray Discs may allow you to select
either the PCM or Dolby Digital audio English
soundtrack.
Disc Type
DVD-VIDEO,
DVD-RW,
DVD-R,
DVD+RW,
DVD+R
DVD-VIDEO, recorded
DVD+RW/DVDRW(V)/DVD-R/+R
discs that have been
recorded and finalised,
or a USB storage media
containing DivX, MKV,
MP4 contents.
MUSIC
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
Music recorded on CDRW/-R, DVD-RW/-R,
BD-RE/-R discs or a
USB storage media
containing MP3 or WMA
contents.
PHOTO
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
Photos recorded on
CD-RW/-R, DVDRW/-R, BD-RE/-R
discs or a USB storage
media containing JPEG
contents.
VIDEO
52 - English
✎✎ The product may not play certain CD-RW/-R and
DVD-R because of the disc type or recording
conditions.
✎✎ If a DVD-RW/-R disc has not been recorded
properly in DVD video format, it will not be
playable.
✎✎ Your product will not play content that has been
recorded on a DVD-R at a bitrate that exceeds 10
Mbps.
✎✎ Your product will not play content that has been
recorded on a BD-R or USB device at a bitrate that
exceeds 30 Mbps.
✎✎ Playback may not work for some types of discs, or
when you use specific operations, such as angle
change and aspect ratio adjustment. Information
about the discs is written in detail on the disc box.
Please refer to this if necessary.
✎✎ When you play a BD-J title, loading may take longer
than a normal title or some functions may perform
slowly.
Logos of Discs the Product can Play
Blu-ray Disc
3D Blu-ray Disc
BD-LIVE
Dolby
DTS
Disc Types your Product cannot Play
✎✎ This product may not respond to all operating
commands because some Blu-ray Disc, DVD, and
CD discs allow specific or limited operation and
provide only certain features during playback.
Please note that this is not a defect in the
product.
✎✎ Samsung cannot guarantee that this product
will play every disc bearing the Blu-ray Disc,
DVD, or CD logo because disc formats evolve,
and problems and errors may occur during the
creation of Blu-ray Disc, DVD, and CD software
and/or the manufacture of discs.
✎✎ Please contact the SAMSUNG Customer Care
Centre at, if you have questions or encounter
difficulty when playing Blu-ray Disc, DVD, or CD
discs in this product. Also, refer to rest of this user
manual for additional information on playback
restrictions.
✎
✎ Some commercial discs and DVD discs purchased
outside your region may not play on this product.
DivX
Appendix
~~ DVD-RAM
~~ HD DVD
~~ DVD-ROM/PD/MV-Disc, ~~ Super Audio CD
(except CD layer)
etc
~~ 3.9 GB DVD-R Disc for
~~ DVD-RW(VR mode)
Authoring.
~~ CVD/CD-ROM/CDV/
CD-G/CD-I/LD
(CD-Gs play audio only,
not graphics.)
Java
PAL broadcast system in
U.K, France, Germany,
etc.
Region Code
Both products and discs are coded by region. These
regional codes must match for a disc to play. If the
codes do not match, the disc will not play.
The Region Number for this product is displayed on
the rear panel of the product.
Disc Type
Blu-ray
Disc
53 - English
Region
Code
Area
a
North America, Central
America, South America,
Korea, Japan, Taiwan, Hong
Kong and South East Asia.
b
Europe, Greenland, French
territories, Middle East, Africa,
Australia and New Zealand.
c
India, China, Russia, Central
and South Asia.
Appendix
1
The U.S., U.S. territories and
Canada
2
Europe, Japan, the Middle
East, Egypt, Africa, Greenland
3
Taiwan, Korea, the
Philippines, Indonesia, Hong
Kong
4
Mexico, South America,
Central America, Australia,
New Zealand, Pacific Islands,
Caribbean
5
Russia, Eastern Europe, India,
North Korea, Mongolia
6
China
DVDVIDEO
✎✎If the Region number of a Blu-ray Disc/DVD
does not correspond to the Region number of
this product, the product cannot play the disc.
AVCHD (Advanced Video Codec High
Definition)
~~ This product can play back AVCHD format discs.
These discs are normally recorded and used in
camcorders.
~~ The AVCHD format is a high definition digital video
camera format.
~~ The MPEG-4 AVC/H.264 format compresses images
with greater efficiency than the conventional
image compressing format.
~~ Some AVCHD discs use the “x.v.Colour” format.
This product can play back AVCHD discs that use
the “x.v.Colour” format.
~~ “x.v.Colour” is a trademark of Sony Corporation.
~~ “AVCHD” and the AVCHD logo are trademarks of
Matsushita Electronic Industrial Co., Ltd. and Sony
Corporation.
✎✎ Some AVCHD format discs may not play,
✎✎ Some DivX, MKV and MP4 format discs may not
play, depending on their video resolution and
frame rate.
Supported Formats
Notes on the USB connection
~~ Your product supports USB storage media, MP3
players, digital cameras, and USB card readers.
~~ The product does not support folder or file names
longer than 128 characters.
~~ Some USB/digital camera devices may not be
compatible with the product.
~~ Your product supports the FAT 16, FAT 32, and
NTFS file systems.
~~ Connect USB devices directly to the product’s USB
port. Connecting through a USB cable may cause
compatibility problems.
~~ Inserting more than one memory device into a
multi-card reader may cause the reader to operate
improperly.
~~ The product does not support the PTP (Peer to
Peer) protocol.
~~ Do not disconnect a USB device while it is
transferring or recording data.
~~ The bigger the image resolution, the longer the
image takes to display.
~~ This product cannot play MP3 files with DRM
(Digital Rights Management) downloaded from
commercial sites.
~~ Your product only supports video that is under
30fps (frame rate).
~~ Your product only supports USB Mass Storage Class
(MSC) devices such as thumb drives and USB HDD.
(HUB is not supported.)
~~ Certain USB HDD Devices, multi-card readers and
thumb drives may not be compatible with this
product.
~~ If some USB devices require excessive power, they
may be limited by the circuit safety device.
~~ If playback from a USB HDD is unstable, provide
additional power by plugging the HDD into a wall
socket. If the problem continues, contact the USB
HDD manufacturer.
~~ SAMSUNG is not responsible for any data file
damage or data loss.
depending on the recording conditions.
✎✎ AVCHD format discs need to be finalised.
✎✎ “x.v.Colour” offers a wider colour range than
normal DVD camcorder discs.
54 - English
Video File Support
File
Extension
Container
Video Codec
Resolution
Frame rate
(fps)
Bitrate
(Mbps)
24/25/30
60
Audio Codec
*.avi
*.mkv
*.asf
*.wmv
*.mp4
*.mov
*.3gp
*.vro
*.mpg
*.mpeg
*.ts
*.tp
*.trp
*.mov
*.flv
*.vob
*.svi
*.m2ts
*.mts
*.divx
*.ps
AVI
MKV
ASF
MP4
3GP
MOV
FLV
VRO
VOB
PS
TS
SVAF
*.webm
WebM
VP8
1920x1080
6~30
20
Vorbis
*.rmvb
RMVB
RV8/9/10 (RV30/40)
1920x1080
6~30
20
RealAudio 6
MVC
Motion JPEG
H.264 BP/MP/HP
Divx 3.11 / 4 / 5 / 6
MPEG4 SP/ASP
1920x1080
Window Media Video
v9(VC1)
FHD :
MAX 30
HD :
MAX 60
AVS
30
MPEG2
MPEG1
Microsoft MPEG-4 v3
Window Media Video
v7(WMV1), v8(WMV2)
H 263 Sorrenson
VP6
MAX 30
720x576
640x480
6~30
4
`` Limitations
`` Video decoder
-- Files are not supported if there are some issues
with contents among the supported codecs listed
above.
-- Normal playback is not guaranteed if the file's
container information is wrong or the file itself is
corrupted.
-- Sound or video play may cutoff for contents with
bitrate/frame rates that are above standard.
-- The seek (skip) function is not available if the file's
index table is damaged.
-- Depending on your network status, play may
become disrupted when playing contents from the
network.
-- Some USB/Digital camera devices may not be
compatible with the product.
-- RMVB format is supported in China and Hong
Kong only
-- AVS codec is supported for contents for China only
-- *.ps extension is supported for contents for China
only
-- DivX codec is not supported for contents in the US
-- Supports up to H.264 Level 4.1 (except for
FMO/ASO/RS)
-- Does not support VC1 AP L4
-- Except for WMV v7, v8, MSMPEG4 v3, MVC, VP6
Below 1280 X 720: 60 frame max
Above 1280 X 720: 30 frame max
-- Does not support GMC 2 or higher
-- Supports SVAF Top/Bottom, Side by Side, Left/Right
view sequence type(2 ES) Only
-- Supports BD MVC Spec Only
`` Audio decoder
---------
Supports WMA 10 Pro (Up to 5.1)
Does not support WMA lossless audio.
Supports M2 profile
ReadlAudio 10 lossless is not supported for
contents for China and Hong Kong
Does not support QCELP, AMR NB/WB
vorbis : Supported up to 5.1 channel
DD+ : Supported up to 7.1ch
DTS LBR codec is supported in MKV/MP4/TS
containers only
55 - English
Appendix
Microsoft MPEG-4 v1, v2
1280x720
AC3
LPCM
ADPCM
(IMA, MS)
AAC
HE-AAC
WMA
DD+
MPEG(MP3)
DTS
(Core, LBR)
Appendix
Music File Support
File Extension
Type
Codec
Comments
*.mp3
MPEG
MPEG1 Audio Layer 3
-
*.m4a
*.mpa
*.aac
MPEG4
AAC
-
*.flac
FLAC
FLAC
Supports up to 2ch
*.ogg
OGG
Vorbis
Supports up to 2ch
*.wma
WMA
WMA
Supports WMA 10 Pro (Up to 5.1)
Does not support WMA lossless
audio
Supports up to M2 profile
*.wav
wav
wav
-
*.mid
*.midi
midi
midi
type 0 and type 1
Seek not supported
Supported on USB only
*.ape
ape
ape
NonSmart not supported
*.aif
*.aiff
AIFF
AIFF
-
*.m4a
ALAC
ALAC
-
Picture File Support
File Extension
Type
Resolution
Comments
*.jpg
*.jpeg
JPEG
15360x8640
-
*.png
PNG
4096x4096
-
*.bmp
BMP
4096x4096
-
*.mpo
MPO
15360x8640
-
56 - English
Digital Output Selections
Setup
PCM
Connection
Audio
Stream on
Blu-ray Disc
Bitstream
(Unprocessed)
Up to PCM 7.1ch
PCM
Dolby
Digital
Up to PCM 5.1ch
Dolby Digital
Dolby
Digital Plus
Dolby Digital Plus
Dolby
TrueHD
Dolby TrueHD
DTSHD High
Resolution
Audio
HT-H7500WM :
Up to PCM 5.1ch
HT-H7750WM :
Up to PCM 7.1ch
Re-encoded
Dolby Digital *
DTS-HD High
Resolution Audio
DTS-HD Master
Audio
PCM
Definition
for Blu-ray
Disc
DTS re-encoded
DTS
Appendix
DTS-HD
Master
Audio
Audio
Stream on
DVD
Bitstream
(Re-encoded
Dolby D)
HDMI supported AV receiver
PCM
DTS
Bitstream
(Re-encoded DTS)
PCM 2ch
Dolby
Digital
Up to PCM 5.1ch
Dolby Digital
DTS
HT-H7500WM :
Up to PCM 5.1ch
HT-H7750WM :
Up to PCM 7.1ch
DTS
Any
Decodes the main
Decodes the main
Outputs only the
feature audio
feature audio
Decodes the main main feature audio
and BONUSVIEW
and BONUSVIEW
feature audio
stream so that your
audio stream
audio stream
and BONUSVIEW
AV receiver can
together into PCM
together into PCM
audio stream
decode the audio
audio and adds
audio and adds
together into PCM
bitstream.
Navigation Sound
Navigation Sound
audio and adds
You will not hear
Effects, then reEffects, then reNavigation Sound BONUSVIEW audio
encodes the PCM
encodes the PCM
Effects.
or Navigation
audio into Dolby
audio into DTS
Sound Effects.
Digital bitstream or
bitstream.
PCM.
`` If the Source Stream is 2ch or mono, “Re-encoded Dolby D” Setting are not applied. Output will be PCM 2ch.
Blu-ray Discs may include three audio streams :
-- Main Feature Audio : The audio soundtrack of the main feature.
-- BONUSVIEW audio : An additional soundtrack such as the director or actor’s commentary.
-- Navigation Sound Effects : When you choose some menu navigation options, Navigation Sound Effects may
sound. Navigation Sound Effects are different on each Blu-ray Disc.
57 - English
Appendix
Resolution according to the content type
HT-H7500WM
Blu-ray Disc/E-contents/Digital Contents playback
DVD playback
HDMI Mode
Output
Blu-ray Disc
E-contents/
Digital contents
Resolution of Blu-ray Disc
1080p@60F
Setup
BD Wise
HDMI Mode
576i/480i
Auto
Max. Resolution of TV input
Max. Resolution of TV input
1080p@60F
1080p@60F
-
1080p
-
1080p
Movie Frame : Auto (24Fs)
1080p@24F
-
1080i
1080i
1080i
720p
720p
720p
576p/480p
576p/480p
576p/480p
HT-H7750WM
Content Type
Setup
BD Wise
Auto
Movie Frame :
Auto
Blu-ray Disc
E-contents/
Digital contents
Resolution of Blu-ray Disc
1080p@60F
UHD Output : Auto
2160p@24F
2160p@24F
UHD Output : Off
1080p@24F
1080p@24F
Movie Frame : Off
Max. Resolution of TV input Max. Resolution of TV input
Movie Frame : Auto (24Fs)
 1080p only
1080p@24F
1080p@24F
1080p
1080p@60F
1080p@60F
1080i
1080i
1080i
720p
720p
720p
576p/480p
576p/480p
576p/480p
Content Type
Setup
BD Wise
Auto
Movie Frame :
Auto
DVD
576i/480i
DVD 24fps
Conversion : Auto
UHD Output : Auto
UHD Output : Off
DVD 24fps Conversion : Off
Movie Frame : Off
2160p@24F
1080p@24F
Max. Resolution of TV input
Max. Resolution of TV input
Movie Frame : Auto (DVD 24fps Conversion : Auto)
 1080p only
1080p@24F
1080p
1080p@60F
1080i
1080i
720p
720p
576p/480p
576p/480p
58 - English
✎✎ If the TV you connected to the product does not support Movie Frame or the resolution you selected, the
message "If no pictures are shown after selecting 'Yes', please wait for 15 seconds to return to the previous
resolution. Do you want to change the resolution?" appears. If you select Yes, the TV's screen will go to
blank for 15 seconds, and then the resolution will revert to the previous resolution automatically.
✎✎ If the screen stays blank after you have changed the resolution, remove all discs, and then press and hold
the @ button on the top of the product for more than 5 seconds. All settings are restored to the factory
default. Run the Initial Settings procedure again. Then, go to Settings > Picture > Resolution in the Menu,
and select the correct resolution for your TV.
✎✎ When you run the Initial Settings procedure, re-select the language and aspect ratio (screen size and format)
only. Resetting does not affect your network settings, so you should be able to skip Network Setup and
Software Update.
✎✎ When the factory default settings are restored, all stored user BD data will be deleted.
✎✎ The Blu-ray Disc must have the 24 frame feature for the product to use the Movie Frame (24fps) mode.
Troubleshooting
Refer to the table below when this product does not function properly. If the problem you are experiencing is
not listed below or if the instructions below do not help, turn off the product, disconnect the power cord and
contact the nearest authorized dealer or Samsung Electronics Service Centre.
Symptom
Check/Remedy
~~ Is the power cord plugged securely into the outlet?
~~ Turn off the power, and then turn it back on.
Playback does not start.
~~ Check the region number of the Blu-ray/DVD disc.
Blu-ray/DVD disc purchased from abroad may not be playable.
~~ CD-ROMs and DVD-ROMs cannot be played on this product.
~~ Make sure that the rating level is correct.
Playback does not start
immediately when you
press the p button.
~~ Are you using a deformed disc or a disc with scratches on the surface?
~~ Wipe the disc clean.
No sound.
~~ The home cinema does not play sound during fast playback, slow playback,
and step motion playback.
~~ Are the speakers connected properly? Is the speaker setup correctly
customized?
~~ Is the disc severely damaged?
HT-H7500WM : You can
only hear sound from a
few speakers, but not all 6.
~~
~~
~~
~~
HT-H7750WM : You can
only hear sound from a
few speakers, but not all 8.
On certain Blu-ray/DVD discs, sound is output from the front speakers only.
Check if the speakers are connected properly.
Adjust the volume.
When playing audio from a CD, the radio, or a TV, the unit outputs sound to
the front speakers only.
HT-H7500WM : Dolby
Digital 5.1 CH Surround
Sound is not produced.
~~ Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1 CH
Surround Sound is produced only if the disc is recorded with 5.1 channel
sound.
~~ Is the audio language correctly set to Dolby Digital 5.1-CH in the information
display?
HT-H7750WM : Dolby
Digital 7.1 CH Surround
Sound is not produced.
~~ Is there "Dolby Digital 7.1 CH" marked on the disc? Dolby Digital 7.1 CH
Surround Sound is produced only if the disc is recorded with 7.1 channel
sound.
~~ Is the audio language correctly set to Dolby Digital 7.1-CH in the information
display?
59 - English
Appendix
You cannot eject the disc.
Appendix
Symptom
Check/Remedy
The remote control does
not work.
~~ Are you operating the remote within its operational range and within the
proper angle relative to the sensor?
~~ Are the batteries drained?
~~ The disc is rotating but
there is no picture.
~~ Picture quality is poor
and the picture is
shaking.
~~
~~
~~
~~
Audio language and
subtitles do not work.
~~ The Audio Language and subtitle functions will not work if the disc does not
contain them.
The menu screen does not
appear even when you
select the menu function.
~~ Are you using a disc that does not contain menus?
The aspect ratio cannot be
changed.
~~ You can play 16:9 Blu-ray/DVD discs in 16:9 Full mode, 4:3 Letter Box
mode, or 4:3 Pan-Scan mode, but 4:3 Blu-ray/DVD discs are played in 4:3
mode only. Refer to the Blu-ray Disc jacket, and then select the appropriate
function.
~~ The product is not
working.
(Example: The power
goes off or you hear a
strange noise.)
~~ The Product is not
working normally.
~~ Press and hold the remote control's e (EXIT) button for 5 seconds in
STANDBY mode. This will reset the unit.
-- Using the RESET function will erase all stored settings.
Do not use this function unless necessary.
You have forgotten the
rating level password.
~~ With no disc in the product, press and hold the product's @ button for
longer than 5 seconds. INIT appears on the display and all settings will return
to their default values.
-- Using the RESET function will erase all stored settings.
Do not use this function unless necessary.
Can't receive radio
broadcasts.
~~ Is the antenna connected properly?
~~ If the antenna's input signal is weak, install an external FM antenna in an
area with good reception.
While listening to TV audio
through the product, there
is no sound.
~~ If you press the OPEN/CLOSE ^ button while listening to TV audio using the
D. IN or AUX functions, the Blu-ray/DVD disc functions are turned on and
the TV audio is muted.
"Not Available" appears on
screen.
~~ The features or action cannot be completed at this time because:
1. The Blu-ray/DVD disc's software restricts it.
2. The Blu-ray/DVD disc's software doesn’t support the feature (e.g., angles)
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is out of
range.
If the HDMI output is set to
a resolution your TV cannot
support (for example,
1080p), you may not see a
picture on your TV.
~~ Press and hold the @ button on front panel for more than 5 seconds with no
disc in the product. All settings will revert to their factory settings.
Is the TV power on?
Are the video cables connected properly?
Is the disc dirty or damaged?
A poorly manufactured disc may not be playable.
60 - English
Symptom
Check/Remedy
No HDMI output.
~~ Check the connection between the TV and the HDMI jack of the product.
~~ Check if your TV supports 576p/480p/720p/1080i/1080p HDMI input
resolution.
Abnormal HDMI output
appears on the screen.
~~ If random noise appears on the screen, it means that TV does not support
HDCP (High-bandwidth Digital Content Protection).
AllShare function
You can see folders shared
through AllShare, but
cannot see the files.
~~ AllShare only shows Video, Photo, and Music files. Other types of files are
not displayed.
Video plays intermittently.
~~ Check if the network is stable.
~~ Check if the network cable is properly connected and if the network is
overloaded.
~~ The wireless connection between the DLNA compatible device and the
product is unstable.
Check the connection.
The AllShare connection
between the product and
PC is unstable.
~~ IP addresses under the same subnetwork should be unique, otherwise IP
collision can results in such a phenomenon.
~~ Check if you have a firewall enabled.
If so, disable the firewall function.
The home cinema cannot
connect to the BD-LIVE
server.
~~ Test whether the network connection is active by using the Network Status
function.
~~ Check whether a USB memory device is connected to the product.
~~ The memory device must have at least 1GB of free space to accommodate
the BD-LIVE service.
You can check the available size in BD Data Management. (See page 51)
~~ See if the BD-Live Internet Connection option is set to Allow(All).
~~ If all above fails, contact the contents provider or update to the latest
firmware.
When using the BD-LIVE
service, an error occurs.
~~ The USB memory device must have at least 1GB of free space to
accommodate the BD-LIVE service.
You can check the available size in BD Data Management. (See page 51)
✎✎ When the factory default settings are restored, all stored user BD data is deleted.
Hereby, Samsung Electronics, declares that this equipment is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC.
The original Declaration of Conformity may be found at http://www.samsung.com, go to Support >
Search Product Support and enter the model name.
This equipment may be operated in all EU countries.
This equipment may only be used indoors.
61 - English
Appendix
BD-LIVE
Appendix
Specifications
General
FM Tuner
HDMI
Amplifier
Weight
2.7 kg
Dimensions
430.0 (W) x 55.0 (H) x 312.0 (D) mm
Operating Temperature Range
+5°C to +35°C
Operating Humidity Range
10 % to 75 %
Signal/noise ratio
55 dB
Usable sensitivity
12 dB
Total harmonic distortion
0.5 %
Video
HT-H7500WM
1080p, 1080i, 720p, 576p/480p
HT-H7750WM
2D : 2160p, 1080p, 1080i, 720p, 576p/480p
3D : 1080p, 720p
Audio
PCM multichannel audio, Bitstream audio, PCM audio
Front speaker output
165W x 2(3Ω)
Front Top speaker output
(HT-H7750WM only)
165W x 2(3Ω)
Centre speaker output
170W(3Ω)
Surround speaker output
165W x 2(3Ω)
Subwoofer speaker output
170W(3Ω)
Frequency response
Analogue input : 20Hz~20kHz (±3dB)
Digital input : 20Hz~40kHz (±4dB)
S/N Ratio
70dB
Channel separation
60dB
Input sensitivity
(AUX)500mV
62 - English
HT-H7500WM
Speaker
system
Impedance
Frequency Output sound
range
pressure level
Front
Surround
3Ω
Centre
140Hz~
20kHz
40Hz ~
160Hz
Subwoofer
87dB/W/M
88dB/W/M
Rated Maximum
input
input
165W
330W
170W
340W
Dimensions
(W x H x D) (Unit : mm)
Weights
(Unit : kg)
95.0 x 280.0 x 101.0
1.75
95.0 x 150.0 x 101.0
0.64
320.0 x 80.5 x 101.0
1.02
200.0 x 390.0 x 350.0
5.75
Dimensions
(W x H x D) (Unit : mm)
Weights
(Unit : kg)
95.0 x 1215.0 x 101.0
(Stand base: 276.0 x 23.0
x 264.0)
5.01
95.0 x 1160.0 x 101.0
(Stand base: 276.0 x 23.0
x 264.0)
4.73
320.0 x 80.5 x 101.0
1.02
200.0 x 390.0 x 350.0
5.75
HT-H7750WM
Speaker
system
Impedance
Frequency Output sound
range
pressure level
Rated Maximum
input
input
Front/
Front Top
Surround
3Ω
140Hz~
20kHz
87dB/W/M
165W
330W
Subwoofer
40Hz ~
160Hz
88dB/W/M
170W
340W
~~ Network speeds equal to or below 10Mbps are not supported.
~~ Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
~~ Weight and dimensions are approximate.
~~ Design and specifications are subject to change without prior notice.
~~ For the power supply and Power Consumption, refer to the label attached to the product.
ĞĞ SWA-6000
Weight
1.1 kg
Dimensions (W x H x D)
76.2 x 228.6 x 152.4 mm
Operating Temperature Range
+5°C to +35°C
Operating Humidity Range
10 % to 75 %
Output
165W x 2 CH
Frequency range
20Hz~20KHz
S/N Ratio
65dB
63 - English
Appendix
Centre
Appendix
Licences
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured
under license from DTS Licencing Limited. DTS, DTS-HD,
the Symbol, DTS and the Symbol together, & DTS-HD and
the Symbol together are registered trademarks of DTS,
Inc. DTS-HD Master Audio | Essential and DTS Neo:Fusion II are trademarks of DTS, Inc. © DTS, Inc. All Rights
Reserved.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary
of Rovi Corporation. This is an official DivX Certified® device that has passed rigorous
testing to verify that it plays DivX video. Visit divx.com for more information and
software tools to convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased
DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your
device setup menu. Go to vod.divx.com for more information on how to complete your registration.
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are
used under licence.
Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of HDMI Licencing LLC in the United States
and other countries.
Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be
trademarks of their respective owners.
This item incorporates copy protection technology that is protected by U.S. patents and other intellectual
property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.
Blu-ray Disc™, Blu-ray™, and the logos are trademarks of Blu-ray Disc Association.
This product uses Cinavia technology to limit the use of unauthorized copies of some commercially-produced
film and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message
will be displayed and playback or copying will be interrupted.
More information about Cinavia technology is provided at the Cinavia Online Consumer Information Centre at
http://www.cinavia.com. To request additional information about Cinavia by mail, send a postcard with your
mailing address to: Cinavia Consumer Information Centre, P.O. Box 86851, San Diego, CA, 92138, USA."
This product incorporates proprietary technology under license from Verance Corporation and is protected
by U.S. Patent 7,369,677 and other U.S. and worldwide patents issued and pending as well as copyright and
trade secret protection for certain aspects of such technology. Cinavia is a trademark of Verance Corporation.
Copyright 2004-2010 Verance Corporation. All rights reserved by Verance. Reverse engineering or disassembly
is prohibited.
- Open Source Licence Notice
In the case of using open source software, Open Source Licences are available on the product menu.
64 - English
Area
` Europe
AUSTRIA
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please
contact the SAMSUNG customer care centre.
Contact Centre 
0800 - SAMSUNG (0800 - 7267864)
Web Site
www.samsung.com/at/support
www.samsung.com/be/support
(Dutch)
BELGIUM
02-201-24-18
www.samsung.com/be_fr/support (French)
BOSNIA
051 331 999
www.samsung.com/support
BULGARIA 07001 33 11 , sharing cost
www.samsung.com/bg/support
CROATIA
062 726 786
www.samsung.com/hr/support
800 - SAMSUNG (800-726786)
www.samsung.com/cz/support
CZECH
Samsung Electronics Czech and Slovak, s.r.o. V Parku 2343/24, 148 00 Praha 4
DENMARK 70 70 19 70
www.samsung.com/dk/support
Finland
030-6227 515
www.samsung.com/fi/support
FRANCE
01 48 63 00 00
www.samsung.com/fr/support
0180 6 SAMSUNG bzw.
0180 6 7267864*
GERMANY 0180 6 67267864*
www.samsung.com/de/support
(*0,20 €/Anruf aus dem dt. Festnetz, aus
dem Mobilfunk max. 0,60 €/Anruf)
CYPRUS
8009 4000 only from landline, toll free
80111-SAMSUNG (80111 726 7864) only
www.samsung.com/gr/support
from land line
GREECE
(+30) 210 6897691 from mobile and land
line
0680SAMSUNG (0680-726-786)
http://www.samsung.com/hu/
HUNGARY
0680PREMIUM (0680-773-648)
support
ITALIA
800-SAMSUNG (800.7267864)
www.samsung.com/it/support
LUXEMBURG 261 03 710
www.samsung.com/support
Area
MONTENEGRO
SLOVENIA
NETHERLANDS
NORWAY
POLAND
PORTUGAL
ROMANIA
SERBIA
SLOVAKIA
SPAIN
SWEDEN
Contact Centre 
020 405 888
Web Site
080 697 267
090 726 786
0900-SAMSUNG (0900-7267864) (€ 0,10/
Min)
815 56480
0 801-172-678* lub +48 22 607-93-33 **
*(całkowity koszt połączenia jak za 1 impuls
według taryfy operatora)
** (koszt połączenia według taryfy operatora)
808 20 7267
08008 SAMSUNG (08008 726 7864)
TOLL FREE No.
011 321 6899
0800 - SAMSUNG(0800-726 786)
0034902172678
0771 726 7864 (SAMSUNG)
Switzerland
0848 726 78 64 (0848-SAMSUNG)
U.k
EIRE
LITHUANIA
Latvia
ESTONIA
0330 SAMSUNG (7267864)
0818 717100
8-800-77777
8000-7267
800-7267
www.samsung.com/support
www.samsung.com/si/support
www.samsung.com/nl/support
www.samsung.com/no/support
www.samsung.com/pl/support
www.samsung.com/pt/support
www.samsung.com/ro/support
www.samsung.com/rs/support
www.samsung.com/sk/support
www.samsung.com/es/support
www.samsung.com/se/support
www.samsung.com/ch/support
(German)
www.samsung.com/ch_fr/support (French)
www.samsung.com/uk/support
www.samsung.com/ie/support
www.samsung.com/lt/support
www.samsung.com/lv/support
www.samsung.com/ee/support
Correct disposal of batteries in this product
(Applicable in countries with separate collection systems)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be
disposed of with other household waste at the end of their working life. Where marked, the chemical symbols
Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC
Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health
or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste
and recycle them through your local, free battery return system.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories
(e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their
working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal,
please separate these items from other types of waste and recycle them responsibly to promote the sustainable
reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government
office, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
AH68-02710A-02
AH68-02710A-02
Download PDF

advertising