Samsung XE700T1A User manual

Samsung XE700T1A User manual
Chapter 3.
Using the computer
•• This is only supported for models that support a TV output
áᔪ
port (HDMI).
•• When a TV provides more than one HDMI port, connect
the computer to the DVI IN port.
Ŗᮁ
•• When connecting the computer to a TV, switch the
external input mode of the TV to HDMI.
᜽᯲
Charms menu > Devices
2 Select
Select a desired monitor mode.
PC screen only
> Second Screen.
ᰆ⊹
ᖅᱶ
3&୘ִփ
The
contents are only displayed on the PC
monitor (current device).
‫ࢿـ‬
୙ࢠ
ѿ‫ء‬ध୘ִփ
56
Adjusting the Volume
Chapter 3.
Using the computer
You can adjust the volume using the volume control button and
the volume control program.
Adjusting the volume with the buttons
You can control the volume by pressing the volume control button
on the left side of the computer.
The procedures to record sound using the Windows Recorder are
described below.
a microphone to the microphone jack.
1 OrConnect
use built-in microphone.
on the taskbar and select
Check if the microphone is set as the default recording
3 device.
Ŗᮁ
-
áᔪ
᜽᯲
Adjusting the Volume using the Volume
Adjustment Program
ᰆ⊹
Click the Charms menu > Settings
bar.
Using the Sound Recorder
Right-click over the Volume icon
2 Recording
Device.
+
áᔪ
57
>
to adjust the control
If this is the case, it is already set as the default device. If not,
right-click over the microphone and select Set default.
Ŗᮁ
Right-click over the Charms menu > Start
to click All
4 Apps
> Sound Recorder. Then press Start Recording to
᜽᯲
record.
ᖅᱶ
ᰆ⊹
Mute
ᖅᱶ
⦽
áᔪ
Adjusting the Volume
Chapter 3.
Using the computer
58
Ŗᮁ
Using SoundAlive (Optional)
Connecting and using a Ear-set / headset Jack᜽᯲
The SoundAlive function enables you to experience more áᔪ
stereophonic sound using stereo speakers.
•• SoundAlive is only supported in Windows 8.
When there is no sound after connecting an earset or headset,
configure the settings as follows.
ᰆ⊹
Ŗᮁ
•• The software programs provider may vary, depending on
your computer model.
᜽᯲
•• In addition, some pictures may differ from actual product
depending on the computer model and software version.
On the Desktop, click the Charms menu > Settings
>
1 Control
Panel > Hardware and Sound > Sound > Play tab.
ᖅᱶ
the Speakers (Realtek High Definition Audio), click
2 Select
Set Default and click OK.
ᰆ⊹
On the Desktop, click the Charms menu > Settings
1 Control
Panel > Hardware and Sound > Sound.
>
ᖅᱶ
2 Right-click over the Speakers and select Properties.
3 Select the SoundAlive tab and select one of the modes.
Using the Microphone (Optional)
You can optimize the microphone’s performance for a single user
only or for sharing with others.
On the notification area of the taskbar, right-click the Audio
1 Manager
icon , and then click Sound Manager.
On the Microphone tab, select an option to enable, and then
2 click
OK.
.N
arrow: The computer recognizes sound only from a front
45 degree angle. Select this option if only a single user uses
the microphone.
.W
ide: The computer recognizes sound from any front angle
so that the microphone can be shared with other people.
However, this option may cause noise.
LCD Brightness Control
Chapter 3.
Using the computer
áᔪ
The screen brightness is automatically set to the brightest
level when AC power is connected and the brightness is
automatically set dimmer when the computer
runs on battery
Ŗᮁ
power to extend the battery use time.
᜽᯲
Controlling the Brightness Usingᰆ⊹the Keyboard
Click the Charms menu > Settings
1 Adjustment
icon
.
> Screen
ᖅᱶ
2 Adjust the brightness with the screen brightness control bar.
한
59
•• Saving battery power consumption
Decreases the LCD brightness when the computer
is running on battery power to save battery power
consumption.
•• LCD bad pixels principle of computer
Samsung observes the specifications regarding strict
quality and reliability of LCD. But in spite of that, it is
inevitable that there might be a small number of bad
pixels. A large number of bad pixels can cause problems in
appearance, but a small number of pixels doesn’t affect the
computer performance.
Therefore Samsung observes and manages the following
dot principles:
- Bright dot : 2 or less
- Black dot : 4 or less
- Combination of Bright and Dark : 4 or less
Instructions for Cleaning the LCD
Clean the LCD panel with a soft cloth lightly moistened with
computer cleansing detergent moving in one direction.
Cleaning the LCD panel with excessive force can damage the
LCD.
Wireless Network (Optional)
A wireless network (Wireless LAN) environment is a network
environment that enables communication between multiple
computers at home or a small-size office through wireless LAN
devices.
Chapter 3.
Using the computer
60
•• The screen figures and terms may differ depending on the
model.
•• The descriptions below are for computer models with
a Wireless LAN card or device. A Wireless LAN device is
optional.
The pictures in this manual may differ from the actual
product depending on your wireless LAN device model.
•• If the wireless LAN is turned off, select Settings > Wireless
Network and set it to ON.
What is an Access Point (AP)?
An AP is a network device that bridges wired and wireless
LANs, and corresponds to a wireless hub in a wired network.
You can connect multiple wireless LAN installed computers
to an AP.
áᔪ
Wireless Network (Optional)
Chapter 3.
Using the computer
61
Ŗᮁ
Connecting to a Wireless LAN
᜽᯲
If there is an AP, you can connect to the Internet via the AP using
the Wireless LAN connection method provided by Windows.
Connect.
2 IfClick
a network key is set for the AP, enter the network key and
then click OK.
ᰆ⊹
1
If you click the Charms menu > Settings
> Network
Connections
icon, a list of available APsᖅᱶappears.
For the network key, please ask your network administrator.
If you select an AP to connect to, the Connect button
appears.
AP List
When the AP connection is completed, Connected is
3 displayed
next to the corresponding AP. You can now use the
wireless network.
Mobile broadband (Wireless WAN, Optional)
᜽᯲
Chapter 3.
Using the computer
62
ᰆ⊹
A wireless wide area network (WWAN) is a mobile broadband
network that is available in mobile phone service areas.
Click Charms > Settings
> Network to display available
1 mobile
broadband networks as shown below.
ᖅᱶ
•• The descriptions below are for computer models with
mobile broadband devices. A mobile broadband device is
optional.
•• Depending on the version of the operating system, some
áᔪ
functions may not be provided or different
functions may
be provided.
•• The pictures in this manual may differ Ŗᮁ
from the actual
product depending on your WWAN device model.
•• For more information on the mobile broadband network,
áᔪ
᜽᯲
contact the network
provider.
•• You must activate the SIM before you connect to the
mobile broadband.
Ŗᮁ
ᰆ⊹
To find the hardware information for the SIM activation,
open the Charms and click Settings
> Change PC
ᖅᱶ
᜽᯲
settings > Wireless
> View mobile broadband hardware
information. You can check IMEI, phone number, and SIM
ICC ID information.
ᰆ⊹
•• To set a SIM card’s PIN for security, open the Charms and
click Settings
> Network. Press and hold the carrier
name and clickᖅᱶ
View link properties > Secure.
If there are no available network service providers listed
under Mobile broadband, turn off the computer, and insert
the SIM card correctly, and then turn on the computer.
2 Select a carrier, and then click Connect.
Clicking Connect in a foreign country activates automatic
data roaming. Therefore, you may be charged for the data
usage.
If the Profile settings screen appears, follow the onscreen
3 instructions
to enter the required information.
The network connection is established and Internet access is
4 available.
NFC (Near Field Communication) (for corresponding models only)
Ŗᮁ
Chapter 3.
Using the computer
63
᜽᯲
About NFC (Near Field Communication)
•• This is a set of standards to establish radio communications
within a short distance (usually no more than 10 centimeters).
You can share the contents safely and conveniently without
any cumbersome setup process.
computer A, select Charm menu > Device
2 byOnTap.
> Sent
ᰆ⊹
Put the NFC antenna
of the NFC computer B into
3 contact
with the NFC antenna
of computer A.
ᖅᱶ
•• Various features such as video/photo transfers, P2P games,
mobile payments, reading/writing tags, NFC device
communications and so on can be utilized depending on the
NFC device.
•• You can use the NFC function on devices that have the NFC
mark.
For more information on how to use the device, refer to the
User Guide of the device.
Simultaneously sharing a website between two
computers

If the following message appears on the B computer, tap on
4 the
screen.
This section describes how to connect two NFC computers.
You can connect a website displayed on computer A with
computer B at the same time.
1 Open a website on computer A using Internet Explorer.
Now, the website contents in computer A are delivered to
5 computer
B.
You can see the computer A’s website on the computer B’s
Internet Explorer.
NFC (Near Field Communication) (for corresponding models only)
Chapter 3.
Using the computer
64
Ŗᮁ
Connecting a device
The device is connected. You can now use the speaker.
4 Select
Charm menu > Settings > Change PC Settings >
᜽᯲
This section describes how to connect an NFC-supported
Bluetooth speaker.
Device
to view the connected device.
ᰆ⊹
1 Turn the computer on. Turn the Bluetooth speaker on.
Put the NFC mark of the speaker into contact with the NFC
2 antenna
at the back of the computer.
ᖅᱶ
The device connection confirmation message appears at the
3 top
right of the screen. Tap on the message.
Connect the device according to the instructions on the
screen.
Restrictions
•• You can make only one-to-one connection between NFC
devices at a time.
•• Because the NFC function is not compatible between Windows
and Android operating systems, only the URL of the NFC
function is transferred to an Android-based mobile device that
is connected to the computer.
Using the Keyboard Dock (Optional)
Use this keyboard dock only with models that support it.
Chapter 3.
Using the computer
Status LEDs
You can use the USB port for external connections while enjoying
the convenience of a keyboard.
•• You have to purchase the keyboard dock separately.
•• Specifications are subject to change without notice .
•• The images shown may vary.
65
1 Caps Lock
CAPS LOCK LED indicates the capital lock
function. You can enable or disable this
function with the Caps Lock key on the
keyboard.
•• On: The English text you type is in capital
letters.
•• Off: The English text you type is in
lowercase letters.
Front View
Computer Connector
Power LED indicates the status of your
computer and keyboard dock.
Release button
DC Jack
•• On: The computer and the keyboard dock
are successfully connected.
2 Power
•• Blinking: The Computer and the keyboard
dock are not connected properly. Separate
the devices and install the computer again.
•• Off: The computer is in the sleep mode
or has no power source. Press the power
button to wake up the computer.
USB 2.0 port
Status LEDs
Touchpad
Keyboard
USB 2.0 port
Using the Keyboard Dock (Optional)
Chapter 3.
Using the computer
66
When the keyboard dock and the computer are properly
2 connected,
the keyboard dock power indicator is turned
Installing/Separating
on.
Attaching the computer
1
Align the keyboard dock’s connectors and the computer and
insert the computer into the docking slot.
z
The keyboard dock can operate only on the battery power of
the computer.
x
Separating the Computer
Pull the computer upward by hand while pushing the keyboard
dock’s release button with the other hand.
The keyboard dock may not operate properly due to
impurities on the connectors. Make sure that the connectors
are dust-free before connecting the computer to the
keyboard dock.
c
Using the Keyboard Dock (Optional)
Chapter 3.
Using the computer
Shortcut Keys
Shortcut key functions and procedures are discussed in the following sections.
Press both the Fn key and hot key at the same time.
Alternatively, press the Fn Lock key as well as a hot key to use the hot key functions more easily.
► Method 1
+
Shortcut Keys
► Method 2
1
2
Shortcut Keys
67
Using the Keyboard Dock (Optional)
Shortcut Keys
Name
Settings
Screen Brightness
Control
Chapter 3.
Using the computer
68
Function
The Samsung software control program, the Settings, is launched.
Controls the screen brightness.
CRT/LCD
Switches the screen output to the LCD or external monitor when an external monitor (or TV)
is connected to the computer.
Touchpad
Turns the Touchpad function on or off.
When using an external mouse only, you can turn the Touchpad off.
Mute
Volume Control
Airplane Mode
Press this button to turn the audio on or off.
Controls the volume.
Turns all wireless network devices on or off.
(Only for models with a wireless network device.)
Using the Keyboard Dock (Optional)
Touchpad
The touchpad on this keyboard dock has the same functionality as
a typical laptop’s touchpad.
In Windows 8, you can use the additional gestures as shown
below:
Chapter 3.
Using the computer
69
Displaying Additional Menu(s) of a Currently Running
App
Place your finger at the edge of the top area on the touch pad and
drag your finger toward the center, and the menu of the currently
running App appears.
Charms Menu Activating Function
If you place your finger on the right edge of the touch pad and
drag your finger toward the center, the Charms menu appears.
Last Run Window Opening Function
Place your finger on the left edge of the touch pad and drag
your finger towards the center to activate a previously operating
program from among the currently running programs.
Using the TPM Security Device (Optional)
Registering the TPM program
Right-click over the Start screen.
1 Click
> Infineon Security Platform Solution
All Apps
> Security Platform Management > User Settings. (Run as
administrator)
Alternatively, double-click the
icon on the Taskbar and
run initialization with administrator authority.
The security authentication settings begin with the
2 Initialization
Wizard. When the Initialization Wizard appears,
click Next.
If the status not initialized message appears, click Yes.
If you backup the emergency recovery file to an external
storage device according to the instructions of the
Initialization Wizard, you can use the TPM security device
more safely.
Chapter 3.
Using the computer
a Security Platform Feature and set a basic user
3 Select
password.
4 Complete the registration according to the instructions.
The user registration for the TPM program has been
5 completed.
You can encrypt files and folders by using
the encryption file system, and use files and folders to be
encrypted by creating or copying them to the virtual drive.
The virtual drive is created in the following location.
74
Using the TPM Security Device (Optional)
Using the TPM program
For more information about using the TPM program, refer to
the online help for the program.
Chapter 3.
Using the computer
75
If the Confirm Attribute Changes window appears, select
2 the
range to apply the encryption to and click OK.
(This dialog box only appears when the folder is encrypted.)
Encrypting a file (folder)
This function enables encrypting files and folders. You can safely
protect documents through the Encrypt File System (EFS).
The Encrypt File System(EFS) function is supported by the
following operating systems.
•• Windows XP Professional
•• Windows Vista Business / Enterprise / Ultimate
•• Windows 7 Professional / Enterprise / Ultimate
•• Windows 8 Pro / Enterprise
Right-click over the folder (or file) to be encrypted, and select
1 Encrypt
from the pop-up menu.
If the current operating system is Windows 8/7/Vista, the user
account control window appears. In this case, click Continue.
Using the TPM Security Device (Optional)
In the user authentication window, enter the Basic user
3 password
you entered when registering the user and click
OK.
Chapter 3.
Using the computer
Opening an encrypted folder (file)
1 Double-click an encrypted folder (file).
If the user authentication window appears, enter the basic
2 user
password you entered when registering the user and
click OK.
3 The folder (file) opens.
You will be able to confirm that the color of the folder (file)
4 name
in the encrypted folder has been changed to green.
76
Using the TPM Security Device (Optional)
Chapter 3.
Using the computer
77
Decrypting an encrypted folder (file)
When the virtual drive (PSD) does not appear
1
You can only use the virtual drive (PSD) when you have selected
the Personal Secure Drive (PSD) option during the program
registration.
2
If you have not selected the option during the registration,
complete the following steps.
Right-click over an encrypted folder (file) and select Decrypt
from the pop-up window.
If the user authentication window appears, enter the basic
user password you entered when registering the user and
click OK.
3 The folder (file) is decrypted.
Using the virtual drive (Personal Secure Drive: PSD)
The virtual drive (PSD) is a virtual space to save and manage
confidential data. In the created virtual drive (PSD), you can create
files and folders as with a normal drive (e.g. drive C:) and you can
use confidential data saved on another drive by copying the data
to the virtual drive (PSD).
Right-click over the Start screen.
1 Click
> Infineon Security Platform Solution >
All Apps
Security Platform Management > User Settings > Security
Platform Features.
When the Initialization Wizard appears, select Personal
2 Secure
Drive (PSD) and enter the user password.
Click Next several times according to the instructions of the
3 Initialization
Wizard to finish the wizard.
Using the TPM Security Device (Optional)
When the virtual drive (PSD) is not loaded
To use the virtual drive (PSD), the virtual drive (PSD) should be
loaded first. If it is not loaded, you can load it according to the
procedures below.
Right-click over the Security Platform
icon in the system
1 tray
of the Taskbar and select Personal Secure Drive > Load
from the pop-up menu.
In the load window, enter the basic user password and click
2 OK.
If you click on Windows Explorer in the Taskbar on the
3 Desktop
screen, you can confirm that the Personal Secure
Drive has been created.
Note that when you have copied confidential data to the PSD,
the original data files are not encrypted.
Chapter 3.
Using the computer
78
When you have to register again (to erase the
authentication information on the TPM chip)
To register a user again, you need to delete the existing
authentication information saved on the TPM chip and then clear
the TPM chip.
Register the user in the following order.
1 Delete the virtual drive.
Delete the existing authentication information saved on the
2 TPM
chip.
Using the TPM Security Device (Optional)
Deleting the virtual drive
If a virtual drive has been created, you have to delete the virtual
drive before deleting the existing authentication information
saved on the TPM chip.
1
Right-click over
>
Create/Manage.
and click Personal Secure Drive >
2 Click Next.
Enter the password that you entered when registering the
3 TPM
program and click Next.
4 Select Delete selected PSD and click Next.
Select “I want to permanently delete my Personal
5 Secure
Drive without saving an unencrypted copy of its
contents.” and click Next.
6
7 Now the virtual drive has been deleted.
Click Next and then Finish.
Chapter 3.
Using the computer
79
Deleting the existing authentication information saved
on the TPM chip.
On the desktop, select the Charms menu > Settings >
1 Control
Panel > Programs > Uninstall a program >
Infineon TPM Professional Package. Then click Uninstall.
If the message window appears, click Yes to remove the
2 program.
3 If the Infineon Security Platform message appears, click No.
Click the Windows Explorer
4 Desktop.
icon in the taskbar on the
In View > Options > Folder Options > View > Hidden files
5 and
folders item, select the Show hidden files, folders, and
drives option and click OK.
Click the Start > Computer > Drive C: > ProgramData
6 folder
and delete the Infineon folder.
has been deleted.
7 ToNowusethetheTPMTPMProgram
function, please repeat the procedures of the
TPM chip initialization process.
Using the Multimedia App (Optional)
You can enjoy photo, video and music files with the S Camera, S
Gallery and S Player apps.
S Camera
You can take photos and record videos with the S
Camera app, and view them directly in this app.
S Gallery
Only photos or videos recorded with the S Camera
app can be viewed with the S Camera app.
S Player
You can view the photo, video and music files saved
on the computer.
Depending on the version of the program, some functions
may not be provided or different functions may be provided.
Third-party software related services
•• For descriptions about and service requests for third-party
software, please contact the relevant manufacturer.
•• Some troubleshooting actions in response to service
requests may not work depending on the software
manufacturer.
Chapter 3.
Using the computer
You can launch an app in the Start screen.
80
Using the Multimedia App (Optional)
Chapter 3.
Using the computer
81
áᔪ
a picture, slide the camera mode bar into the Photo
3 To takeposition.
Using the S Camera app
Ŗᮁ
1
Tap Charm menu > Start
To make a video recording, slide the camera mode bar to the
Video
position.
> S Camera.
᜽᯲
Camera mode (Photo
, Video
)
ᰆ⊹
4
Tap on Take a picture/Record a video
to take a picture
or record a video.
view the picture or video using the Picture preview
5 You can
or S Gallery app.
ᖅᱶ
The S Camera app is not available in Desktop mode.
Precautions while taking a picture or video
•• Do not take a picture or video of others without their
consent.
Zoom in/out
Photo settings
Picture
preview
Take a picture/
Record a video
Front/rear
For a model that provides 2 cameras (one on the front, the
2 other
on the back), Press the Front / Rear camera selection
button to determine the camera to be used.
•• Do not take a picture or video in locations where this is not
allowed.
•• Do not take picture or videos in locations where you may
infringe on others’ privacy or confidential information may
be exposed.
Using the Multimedia App (Optional)
Chapter 3.
Using the computer
áᔪ
Editing a photo
Using the S Gallery app
Ŗᮁ
1
can view the pictures and videos taken by the S Camera.
2 InYouaddition,
you can apply special effects to the pictures using
Tap Charm menu > Start
> S Gallery.
᜽᯲
ᰆ⊹
the photo editing function.
ᖅᱶ
You can take a picture in the S Gallery app by tapping the
Camera icon.
Picture preview.
1 Select
Drag it upward slightly from the bottom center.
If the options menu appears, select Edit
.
82
Using the Multimedia App (Optional)
Chapter 3.
Using the computer
áᔪ
2 Select an effect to be applied to the photo.
Using the S Player app
Ŗᮁ
E.g. If you select Draw
Line preview
1
Tap Charm menu > Start
Color
Undo
> S Player.
᜽᯲
My Music
ᰆ⊹
My Videos
My Photos
ᖅᱶ
Erase/Draw
Line thickness
Save Close
Frame
Draw
Stamp
Music playlist
Slideshow
My photo list
2 Select a menu to enjoy photo, video and music files.
Some files may not be played depending on their format.
83
Using the S Note app (S Note, Optional)
You can design your note using various formats such as idea
writing, recipe, diary, travel sketch and so on.
Chapter 3.
Using the computer
3
From the Appbar, tap the New note
84
.
Depending on the version of the program, some functions
may not be provided or different functions may be provided.
Creating a note
1 Select S Note in the Start screen.
The S Note app is launched and the S Note guide appears.
2 Tap
Finish.
x
z
Appbar
Using the S Note app (S Note, Optional)
Various note format options will appear.
4 Select
a format.
Chapter 3.
Using the computer
5 Create a note using the Menu.
E.g. When you selected Recipe
Exit S Note
Menu
Tap and hold to change
the photos or contents.
Text, diagrams, and formulas
Undo / Redo
Eraser
Hide menu
Add a page
Record sketch
Voice memo
Preview / edit
Using pens and configuring the
pen tools
85
Favorites
Entering text through the Keypad
and style settings
Insert a figure
Turn the S Pen on or off
Using the S Note app (S Note, Optional)
► Inserting a figure (photo)
We will describe inserting a photo as an example.
z Tap the
icon.
Chapter 3.
Using the computer
86
► Recording a voice memo
z Tap the
icon.
x The voice memo window appears. Tap the Record
button.
x Select the figure insertion method.
c If you tap on Take a picture, the picture taking screen appears.
Tap on the screen to take a picture.
c When the recording is complete, tap the Stop
button.
v The recording is complete. To make a new recording, tap
Replace.
When creating a note is completed, drag the bottom center
6 upward.
Tap Save to finish creating the note.
v If the photo has been taken, tap OK.
b The photo is inserted into the recipe screen. Adjust the size
and location of the photo.
n Inserting a figure is completed.
You can also insert various items such as text boxes, clipart, etc.
Tap the
icon to exit the note app. Then you can view the
7 newly
created note icon.
Using the S Note app (S Note, Optional)
Chapter 3.
Using the computer
87
Sending a note via email
Printing a note
Slightly drag the note to be sent via email downward in the
1 folder.
The note is selected.
Slightly drag the note to be printed downward in the folder.
1 The
note is selected.
2
Select Appbar > More > Print.
2 Alternatively,
select Charm menu > Device and select a
Select Charm menu > Share
> Email.
printing device.
3 Send an email according to the instructions below.
•• You need a Microsoft account to use the email app.
•• To register a note to an app other than the email app,
select Charm menu > Settings > Change PC Settings >
Sharing and set the App to be used for sharing option to
On.
3 Print the note according to the instructions.
Samsung Software Update
SW Update is a software program that searches for Samsung
software programs and drivers installed when you purchased the
computer and helps you update any drivers or programs.
Chapter 3.
Using the computer
The SW Update program runs.
3 Select
the items that you want to update before proceeding
with the update process.
•• You can check updatable files before performing the
update only when you are connected to the internet.
•• SW Update does not provide any updates for device drivers
or software programs installed separately by the user.
Right-click over the Start screen.
1 Click
SW Update in the All Apps
menu item.
If the program is running for the first time, the User
2 Agreement
for personal information use appears.
Click Agree.
88
Software List
Software
Update
Diagnosing the Computer Status and Troubleshooting
The Support Center program, which is Samsung’s computer’s
troubleshooting guide, supports diagnosing the system and has a
FAQ for frequently occurring problem(s).
Support Center may not be provided or may be a different
version depending on the model.
Right-click over the Start screen.
1 Click
Support Center in the All Apps
menu item.
Chapter 3.
Using the computer
89
Support Center is activated and starts diagnosing your
2 computer.
After the diagnosing process is finished, the System Status
menu displays a list of the current problems to be solved as
shown.
Searching for
computer’s problems
Diagnosing
Computer and
Troubleshooting
FAQ for
computer’s
major problems
You can solve a problem by clicking the Troubleshoot button
3 for
the problem.
Chapter 4.
Settings and Upgrade
BIOS Setup
91
Setting a Boot Password
93
Changing the Boot Priority
96
Battery
97
BIOS Setup
The BIOS Setup enables you to configure your computer hardware
according to your needs.
•• Use the BIOS setup to change the booting priority, or add a
new device.
•• Since incorrect settings may cause your system to
malfunction or crash, take care when configuring the BIOS.
•• The functions of the BIOS setup are subject to change for
product function enhancement purposes.
•• The BIOS Setup menus and items may differ depending on
your computer model.
Chapter 4.
Settings and Upgrade
91
Entering the BIOS Setup
1 Shut the computer down.
the computer’s Power button.
2 Press
If the Samsung logo screen appears, press the Home button
áᔪ
Ŗᮁ
.
᜽᯲
After a moment, the BIOS setup screen appears.
3 The
items in the BIOS setup may differ depending on the
ᰆ⊹
product.
ᖅᱶ
BIOS Setup
Chapter 4.
Settings and Upgrade
The BIOS Setup Screen
Setup Menu
Select each Setup menu by tapping it and configuring each of the
settings.
Setup Menu
SysInfo
SanDisk SSD U100 126GB
CPU
CPU
CPU
CPU
Intel(R)
Core(TM) i5-3317U CPU
1.70 GHz
Supported
Vender
Type Core
Speed
VT (VT-x)
Total Memory
4096 MB
BIOS Version
MICOM Version
E00AAT.017.120804.dg
E00AAT.017
Aptio Setup Utility - Copy (C) 2012 American Megatrends, Inc.
Help
Help for the selected item
appears automatically.
Setup Items
Description
This is a description about the basic
specifications of the computer.
Advanced
Using this menu, you can configure the major
chipsets and additional functions.
Security
Used to configure security functions, including
passwords.
Boot
This menu enables you to configure peripherals
and booting related settings such as the boot
priority.
System Time >
System Date >
SATA Port 1
92
Boot to Device
Enables booting from a peripheral device.
Setting a Boot Password
If you set a password, you have to enter the password when you
turn the computer on or enter the BIOS Setup.
By configuring a password, you can restrict system access to
authorized users only and protect data and files saved on the
computer.
•• The password setting provides the following 3 sub menus.
(Supervisor Password, User Password and HDD Password)
•• Do not lose or forget your password.
•• Do not let others know your password.
•• If you forget the Supervisor Password or HDD Password,
you will need to request assistance from the service center.
In this case, a service fee will be charged.
•• When you forget the User Password, you can disable
the Supervisor Password, and the User Password is also
automatically disabled.
•• The screen images and terms may differ from actual
product depending on the computer model and driver
version.
Chapter 4.
Settings and Upgrade
93
Setting a Supervisor Password
If you set a Supervisor Password, you need to enter the password
when you turn the computer on or enter the BIOS Setup.
Setting only the Supervisor Password and User Password is not
very secure. You can use an HDD Password as well to increase the
security level.
1 Select the Security menu in the BIOS Setup.
2 In the Set Supervisor Password item, press <Enter>.
Supervisor Password
User Password
HDD Password
Clear
Clear
Clear
Set Supervisor Password >
Set User Password >
Set HDD Password >
Power On Boot
On
TPM Configuration >
Aptio Setup Utility - Copy (C) 2012 American Megatrends, Inc.
Setting a Boot Password
Enter a password, press <Enter>, re-enter the password for
3 confirmation,
and press <Enter> again.
The password can be up to 8 alphanumeric characters.
Special characters are not allowed.
The supervisor password has been set.
4 The
supervisor password is required to turn the computer on
or to enter the BIOS Setup.
For some models, if the password entered message appears
in the Setup Notice window, the settings are not complete
until the <Enter> key is pressed.
Chapter 4.
Settings and Upgrade
94
Setting a User Password
Using the User Password, you can turn the computer on but you
cannot change the major settings of the BIOS Setup because you
cannot enter the BIOS Setup.
This helps prevent unauthorized access to the major settings in
the BIOS Setup menu.
Before configuring a user password, a supervisor password must
have been configured. Deactivating the supervisor password also
deactivates the user password.
In the Set User Password item, press <Enter> and complete the
procedures from Step 3 of Setting a Supervisor Password.
Setting Up a Boot Password
To setup a boot password, the administrator password (Set
Supervisor Password) should be set in advance.
Set the Password on boot item to Enabled.
Once a boot password is set, you have to enter a password to boot
up the computer.
Be sure to remember the password for later use.
Setting a Boot Password
Setting up a Hard Disk Drive Password (Optional)
If you set a password for a hard disk drive, it cannot be accessed
from another computer.
Press <Enter> in the Set HDD Password item and define a
password as described in Step 3 of the Setting up the Supervisor
Password.
•• The hard disk drive password setting function is not
provided for some models.
Chapter 4.
Settings and Upgrade
95
Deactivating the Password
<Enter> on the password to be deactivated. For
1 Press
example, to deactivate a supervisor password in the Set
Supervisor Password item, press <Enter>.
In the Enter Current Password item, enter the currently
2 configured
password and press <Enter>.
•• Changing the hard disk drive password
Leave the Enter New Password item field empty, and press
3 <Enter>.
For security purposes, you can only change a hard disk
drive password after restarting the computer by pressing
the computer Power button.
Leave the Confirm New Password field empty, and press
4 <Enter>.
If you cannot change the hard disk drive password or the
HDD Password Frozen message appears when entering
the BIOS Setup and then selecting Security > HDD
Password, press the Power button to turn the computer
on again.
The password is deactivated.
For some models the password is only canceled if the
<Enter> key is pressed in the Setup Notice window.
Changing the Boot Priority
The computer is configured so that it boots from the HDD with
priority, by default.
Chapter 4.
Settings and Upgrade
96
Set the Boot Device Priority > Boot Option #1 item on the
4 right
screen to USB device.
This section will show you how to change the setting so that the
computer boots from a USB device.
The screen image and terms may change depending on the
model and the device driver version.
Boot Option Priorities
Boot Option #1
xxx
1
the computer restarts and the Samsung logo screen
2 Ifappears,
press the Home button .
Connect the USB device.
áᔪ
Ŗᮁ
᜽᯲
the BIOS Setup. Select the Boot menu in the BIOS
3 Enter
Setup.
Aptio Setup Utility - Copy (C) 2012 American Megatrends, Inc.
ᰆ⊹
ᖅᱶ
Boot Device Priority >
Secure Boot
OS Mode Selection
Off
UEFI OS
Smart Battery Calibration >
Aptio Setup Utility - Copy (C) 2012 American Megatrends, Inc.
5 Select Save and then Yes.
The computer will restart.
6 Now,
the boot priority has been changed so that the device
will boot from the USB device with priority.
Battery
Chapter 4.
Settings and Upgrade
97
Please refer to the following instructions when running the
computer on battery power without connecting the AC power.
This computer is equipped with an internal battery.
Precautions
•• Users cannot remove or replace the internal battery.
•• To remove or replace the battery, use an authorized
service center in order to protect the product and
users. You will be charged for this service.
•• Use only chargers specified in the User Manual.
•• Never heat the battery pack, put it near or in a fire or use at
a temperature higher than 60°C, as this may cause fire.
•• Please refer to the system operation environment of
this manual and operate and store the battery at room
temperature.
The location of the internal battery
Charging the Battery
Connect the AC adapter to the power input jack of the computer.
Before using the computer for the first time, make sure to
connect the AC adapter and charge the battery completely.
The battery will start charging.
Battery
Chapter 4.
Settings and Upgrade
Measuring the Remaining Battery Charge
You can view the battery charge status by completing the
following procedures.
Confirming the battery charge in the Taskbar
Disconnect the AC adapter and move the mouse cursor over
the battery icon in the system tray of the Taskbar to confirm the
remaining battery charge.
áᔪ
Checking when the computer is off
Ŗᮁ
If you press the Home button
while charging, when your PC is
᜽᯲
powered off, the battery indicator is displayed on the screen for a
moment.
Alternatively, if you connect theᰆ⊹AC adapter when the computer
is off, the remaining battery charge is briefly displayed on the
ᖅᱶ
screen.
98
Battery Usage Time Information
A battery is an expendable supply, so when using it over a long
time, the capacity/battery life is shortened. If the battery life is
reduced to under half of its initial time, we recommend purchasing
a new battery.
When not using the battery for a long time, store the battery after
charging it to 30-40% of its capacity. This extends the battery life
time.
Battery
áᔪ
Chapter 4.
Settings and Upgrade
Ŗᮁ
99
Ŗᮁ
Using the power management program
᜽᯲
Extending the Battery Usage Time
Decreasing the LCD Brightness
1
2 Dims the screen.
᜽᯲
This program helps you use the battery more efficiently
and supports the power mode optimized for the operating
environment.
ᰆ⊹
Click the Charms menu > Settings
> Screen
ᖅᱶ
icon.
ᰆ⊹
Charms menu on the Desktop > Settings
>
1 Click
Control Panel > Hardware and Sound > Power Options.
ᖅᱶ
Alternatively, right-click the power measuring device icon
in the notification area of the taskbar and select Power
Options.
2 If the following screen appears, select one of the modes.
Battery
Chapter 4.
Settings and Upgrade
Using the Battery Calibration Function
When charging/discharging the battery repeatedly for a short time
only, the battery usage time may be reduced by the difference
between the actual battery charge and the remaining charge
display.
In this case, the actual battery charge and the remaining charge
display will be the same by discharging the battery completely
using the Battery Calibration function, and then recharging it
again.
100
If you select Boot > Smart Battery Calibration, calibration is
3 performed.
Boot Device Priority >
Secure Boot
OS Mode Selection
Off
UEFI OS
Smart Battery Calibration >
The screen images and terms may differ from actual product
depending on the computer model and driver version.
1
pressing the Power button, if the Samsung logo screen
2 After
appears, press the Home button
several times.
áᔪ
Shut down the computer and remove
the AC adapter.
Ŗᮁ
᜽᯲
ᰆ⊹
ᖅᱶ
Aptio Setup Utility - Copy (C) 2012 American Megatrends, Inc.
To stop the process, press the Home button.
This process takes approximately 3 to 5 hours to finish
depending on the capacity and the remaining battery charge.
Chapter 5.
Troubleshooting
Recovering/Backing up the Computer (Optional) 102
Reinstalling Windows (Optional)
108
Q&A
111
Recovering/Backing up the Computer (Optional)
When a problem occurs with your computer, you can easily
restore your computer using the Recovery program. Alternatively,
you can back up your computer so that you can restore it to your
preferred state at any time.
If the computer fails to boot up, press the Power button x
while holding down the Volume button (+) z to restore the
computer. Alternatively, if you have connected an external USB
keyboard (optional), you can restore the computer by pressing the
F4 key on the keyboard.
x
Recovery Introduction
Recover
Back Up
Help
Function
z
Chapter 5.
Troubleshooting
Description
Recover
Restores the entire Windows drive.
Back Up
You can back up your entire Windows drive.
102
Recovering/Backing up the Computer (Optional)
•• Recovery may not be provided or may be a different
version depending on the model.
•• Some functions may differ slightly or be excluded
depending on the version. Refer to the program's Help
section for more information.
•• For models whose hard disk or SSD capacity is less than 64
GB, the Recovery program is not provided.
•• An ODD (CD/DVD drive, etc.) is not supported by the
Recovery program.
•• Since restoring the system deletes all data and userinstalled programs saved after your last restore point, it is
advisable to back up any important data before restoring
your system.
•• Pressing the F4 key is equivalent to pressing the Power
button while holding down the Volume (+) button.
Hereafter, the F4 key operation described in this manual
can be simulated by pressing the Power and Volume (Up)
buttons.
Recovering
You can restore the computer settings to the factory default
settings if the computer fails to boot up, or if you encounter a
serious problem with the computer.
Chapter 5.
Troubleshooting
103
Windows does not start
1 - IfPress
the power button while holding down the volume
button (+). The computer enters restoration mode.
- In the Start screen after the computer boots up
R
ight-click over the Start screen. Click Recovery in the All
menu item.
Apps
If the initial menu screen appears, click Recover.
2 Select
a recovery point and click Recover.
If you set the User Data Maintenance to ON, the computer is
restored while maintaining the current user data.
Recovering/Backing up the Computer (Optional)
is performed based on the screen instructions.
3 IfRecover
the recover is completed, you can use your computer
normally.
Chapter 5.
Troubleshooting
104
Click Backup in the Recovery Home screen.
2 Select
the drive to save and click Backup.
You cannot select a DVD drive.
Recovering after a Backup
You can recover your computer after you have backed up your
computer to a separate drive or external storage device.
Backing up
Select the drive
to save to.
To back up your computer to an external storage device,
1 connect
the external storage device and select the relevant
drive.
3 The backup process is performed based on the instructions.
Recovering/Backing up the Computer (Optional)
Recovering
You can recover your computer using the backup from the above
process.
If the backup image is saved to an external storage device,
1 connect
the device.
2 Start Recovery and click Recover.
Select a Recover Option and click Recover.
3 Select
a point to recover.
Chapter 5.
Troubleshooting
105
The recover is performed based on the screen instructions.
4 You
can use your computer after the recover is completed.
To copy the external storage disk
When you replace a storage device such as the HDD, SSD, etc.
(hereafter referred to as a hard disk) built into your computer, you
can move your existing data to the new storage device easily and
safely.
The new storage device must have sufficient capacity to save
your existing data.
You need to purchase an external hard USB connector
separately to connect the hard disk and your computer.
You need to purchase an external hard USB connector
1 separately
to connect the hard disk and your computer.
2 Start Recovery and click Disk copy
.
Recovering/Backing up the Computer (Optional)
Chapter 5.
Troubleshooting
106
Your computer is now equipped with a new hard disk.
3 Select an option in Disk recovery Point and click Disk copy. 6 The
new hard disk now contains all data from the old hard
disk with the same settings.
The data on the current hard disk is saved to the new hard
4 disk.
If the data is completely saved, open the hard disk cover at
5 the
bottom of your computer and replace the existing hard
disk with the new one.
If you cannot open the cover at the bottom of the computer,
contact the Samsung Service Center to request assistance.
In this case, you may be charged for the relevant service.
Recovering/Backing up the Computer (Optional)
Computer Recovery Function in Windows 8
If a problem occurs with your computer, the recovery program
allows you to restore your computer to the default settings.
For models where the SSD is less than 64GB, use the Windows
System Restore function instead of the Recovery program.
Click the Charms menu > Settings > Change PC Settings >
1 General.
2 Click the Start button for Refresh.... or Remove.....
Refresh....
If your PC does not work properly, you can
restore your PC while keeping your media
files such as your photo, video and music
files, etc. as well as your personal documents.
Remove….
You can remove all items in your PC and
reinstall Windows again.
You should back up the files in the following folders
before using the PC Recovery function since these files
are not kept.
\Windows, \Program files, \Program files(x86), \ProgramData,
OEM Folder (ex) c:\samsung), \User\<user name>\AppData
Chapter 5.
Troubleshooting
Follow the onscreen instructions to proceed with the
3 recovery
process.
If the recovery is complete, you can use your computer
normally.
You can restore required Samsung software programs
> SW Update.
through All Apps
107
Reinstalling Windows (Optional)
You can reinstall Windows using the SYSTEM RECOVERY MEDIA
for Windows when Windows is no longer working properly.
(For models supplied with a SYSTEM RECOVERY MEDIA.)
These descriptions are for Windows 7/8 and Windows Vista and for
supported models only.
•• A SYSTEM RECOVERY MEDIA may not be supplied
depending on your computer model.
•• If you cannot start Windows, or if you want to delete
all existing data and reinstall Windows, install Windows
according to the descriptions in [Reinstalling when
Windows does not start].
•• Some pictures may differ from actual product.
•• These descriptions may differ depending on the operating
system.
•• Reinstalling Windows may delete data (files and programs)
saved on the hard disk drive.
•• Make sure to backup all important data. Samsung
Electronics shall not be held liable for any loss of data.
Chapter 5.
Troubleshooting
108
Reinstalling in Windows
1 Insert the SYSTEM RECOVERY MEDIA into the CD drive.
If the Select Windows Installation window appears, click
2 Install
Now. When the Select Update window appears, click
on the relevant item.
•• If you select Go online to get the latest updates for
installation in the Select Update window, the latest
updates are installed and Step 4 follows. At this time, the
computer must be connected to the Internet.
•• For Windows 7/8, the screen asking for the operating
system to be installed may appear depending on the
version. If you click the Next button, the screen of Step
3appears.
If the User Agreement screen appears, select I accept the
3 license
terms and then click Next.
For Windows 7/8, this screen may not appear depending on
the version.
Reinstalling Windows (Optional)
Chapter 5.
Troubleshooting
109
When a window appears asking for the location to install the
4 The following window appears, select an installation option. 5 operating
system to, select a disk drive partition and click the
If you click Custom, the procedures from Step 5 continue
sequentially.
If you click Upgrade, the procedures from Step 6 continue
sequentially.
•• For Windows 7/8, this screen may not appear depending
on the version.
•• Custom
Select this option to Reinstall Windows. You have to
reinstall all necessary device drivers and programs after
the Custom installation. In addition, unnecessary folders
and files may remain on the hard disk drives after the
installation (e.g. C:\ Windows.old, etc.).
•• Upgrade
Select this option to Upgrade Windows while maintaining
current files, configurations and programs. Although you
therefore do not need to reinstall the device drivers and
programs, some programs may not work properly after the
upgrade.
Next button.
Drive D includes an area to save the backup image used
by Recovery program. Installing Windows to drive C is
recommended.
When previous Windows installation files are in the selected
partition, a message appears informing you that the files and
folders will be moved to the Windows. old folder. Click the
OK button.
The Windows installation continues.
6 The
computer will restart 3 times during the installation.
If the Press any key to boot from CD or DVD... message
appears after a restart, do not press any button.
Register a user according to the instructions on the Windows
7 screen.
When the registration is complete, the Windows Desktop
8 screen
appears.
For a smooth computer operation, installing the necessary
software installation is recommended.
Reinstalling Windows (Optional)
Reinstalling when Windows does not start
When Windows does not start, boot up with the SYSTEM
RECOVERY MEDIA and from there you can reinstall Windows.
Insert the SYSTEM RECOVERY MEDIA into the DVD drive
1 and
restart the computer.
If the Press any key to boot from CD or DVD... message
2 appears
while booting, press any key on the keyboard.
Chapter 5.
Troubleshooting
110
For Windows 7/8, this screen may not appear depending on
the version.
When the window asking for the installation type appears,
6 click
Custom.
For Windows 7/8, this screen may not appear depending on
the version.
When a window appears asking for the location to install the
7 operating
system to, select the partition of the disk drive and
then click the Next button.
After a while, the Options windows such as Language, Time,
3 Keyboard,
etc. appear. Confirm the settings and click the
Drive D includes an area to save the backup image used
by Recovery program. Installing Windows to drive C is
recommended.
If the Select Windows Installation window appears, click
4 Install
Now.
•• A If you click Drive Options (Advanced), you can delete,
format, create or expand a partition. Click on a function
and proceed according to the instructions on the screen.
Next button.
For Windows 7/8, the screen asking for the operating system
to be installed may appear depending on the version. If you
click the Next button, the screen of Step 5 appears.
5
If the User Agreement screen appears, select I accept the
license terms and then click Next.
•• When previous Windows installation files are in the
selected partition, a message appears informing you that
the files and folders will be moved to the Windows.old
folder. Click the OK button.
The subsequent steps are the same as those from Step 7 of
8 Installing
in Windows.
Q&A
You can look for potential problems that may occur with the
system and view the relevant solutions. Also, you may look up any
reference(s) required while operating the computer.
Chapter 5.
Troubleshooting
The capacity representation in Windows may be smaller
than the actual capacity because some programs occupy a
certain area of the HDD outside of Windows.
For models with Recovery, the HDD capacity representation
in Windows may be smaller than the actual capacity because
Recovery uses a hidden area of about 5~20GB of the HDD
to save the recovery image, and that hidden area is not
counted towards the total size available to Windows.
The size of Recovery varies by models because of the
different size of applied programs.
Recovery Related
Q1
What is a Recovery Area?
A
Samsung computers have an additional partition to recover
computers or save backup files. (Only for models with the
Recovery.)
This partition is called a Recovery Area and it includes a
recovery image that comprises of the OS and application
programs.
Q2
A
The capacity representation of the hard disk
drive(HDD) in Windows is different from the product
specifications.
The capacity of the storage device (HDD) of the
manufacturer is calculated assuming that 1KB=1,000 Bytes.
However, the operating system (Windows) calculates the
storage device capacity assuming that 1KB=1,024 Bytes,
and therefore the capacity representation of the HDD in
Windows is smaller than the actual capacity.
111
Q3
A
What is a recovery image?
This refers to the computer status (including operating
system, specific driver(s), software(s), etc.) which is converted
to a data image. It is required to recover your computer and
is embedded in the computer's hard disk. However, this is
not provided for storage devices where the capacity is less
than 64 GB due to the small capacity.
Q&A
Q4
How can I restore a computer that does not have the
Recovery program?
A
You can restore the computer using the system recovery
function provided by Windows.
Refer to the Restore Functionality item in the Help section
for more details.
Windows 8 Related
Q1
I cannot find the Start button on the Desktop.
A
There's no Start button in Windows 8.
You can use the Control Panel, PC-running menu(s), etc. by
activating the Charms menu.
Q2
I cannot find the computer's Shutdown button.
A
Click the Charms menu > Settings > Power to display the
Power Options menu.
Click Shutdown.
Chapter 5.
Troubleshooting
Q3
A
112
The App disappeared in the Start screen.
Click the Charms menu > Search to display all installed
Apps. Right-click over the corresponding App to select in a
Tile in the Start Screen.
Q4
A
Since I'm familiar with Windows 7, I would like the
Desktop screen to appear as it does in Windows 7.
Currently, there is no way to set the Desktop to appear by
default.
Press the Windows key + D key simultaneously to reveal
the Desktop when the Start screen appears. This is currently
the only workaround.
Q5
How can I install a printer driver?
A
Run your driver installation file and follow the corresponding
instructions. You can install it in the same method as the
existing OS.
Refer to your printer manual for detailed instructions for
each model.
Q&A
Q6
How can I uninstall the driver?
A
On the Desktop, click Charms menu > Settings > Control
Panel > Programs and Features.
Click the program. Then click uninstall.
Chapter 5.
Troubleshooting
Q8
A
Q7
A
Click Charms menu > Settings > Change PC Settings >
Personalization. You can set the OS settings such as the
screen design, etc.
To configure your computer in detail, click the Charms
menu in Desktop > Settings > Control Panel.
You can configure your computer in the same way as
existing Windows systems.
Active X does not run in Internet Explorer on the Start
screen.
Since Internet Explorer on the Start screen complies with the
HTML5 web standards, it does not support Active X. However,
Internet Explorer on the Desktop supports Active X.
How can I change the screen settings, environment
settings, type size, color, and so on?
113
Q9
► How to activate Active X:
If you right-click over the Internet Explorer, the following
window appears. Press the
button and click View on the
Desktop. Active X is now enabled.
I want to remove the pre-installed Windows 8
operating system and install a different OS.
A
If you want to install a different operating system on your
PC, you need to change the BIOS settings first.
For more information, visit http://www.samsung.com and
go to Customer Support > Troubleshooting. Search for
Windows 8 and look through the list of search results for the
relevant issue.
Q&A
Display Related
Q1
A
The Desktop displayed on the TV after connecting via
the HDMI port does not fit the screen.
Go to the Graphics Control Panel to adjust the screen
settings.
► For Intel graphics cards
Right-click over the Desktop and go to Graphics Properties
> Display > General. Adjust the Horizontal Ratio and
Vertical Ratio settings to fit your screen and click OK.
► For AMD graphics cards
1. Right-click over the Desktop and select Graphics
Properties > Desktop and Display > My Digital Flat
Panel > Expansion Options (Digital Flat Panel).
2. Adjust the control bar to fit the TV corners and click Apply.
Chapter 5.
Troubleshooting
114
Sound Related
Q1
I cannot hear any sound from the TV after connecting
via the HDMI port.
A
1. Right-click over the taskbar on the Desktop and click Play
Device.
2. Change the option to Digital Audio (HDMI), HDMI device,
HDMI Output or another option and click Set as Default.
Then click OK.
Q&A
Chapter 5.
Troubleshooting
Touch screen Related
Q1
The screen is abnormally displayed when the touch
screen has been rotated.
A
The screen rotation function may not work properly
depending on the application.
To fix the screen orientation, press the Rotation Lock
button.
Q2
The letters on the computer screen overlap.
115
USB keyboard / Device Related
Q1
A
Q2
A USB device is not recognized in the BIOS Setup
In the BIOS Setup, select Advanced > Fast BIOS Mode and
change the setting to Off and restart the computer. Then
you will be able to use the USB device.
I connected a USB keyboard and pressed F2 during
the booting sequence, but the BIOS Setup screen does
not appear.
A
If the font size is set to large, the letters on the screen may
overlap.
A
If the Advanced > Fast BIOS Mode item in the BIOS Setup
menu is set to Off, the USB keyboard is not recognized.
In this case, select Settings > Touch Tuning > DPI Settings
and set the text size to Basic.
In this case, you can enter the BIOS Setup using one of the
buttons of the computer.
Press the computer's power button. If the Samsung logo
screen appears, press the Home button.
The BIOS Setup screen appears.
Q&A
Multimedia App Related
are the photos and videos taken by the S
Q1. Where
Camera saved?
A
The photos and videos you took are saved in Library >
Photo > Camera Roll.
Chapter 5.
Troubleshooting
I turned the volume up to the maximum in
Q4. Although
the S Player, the volume is still low.
A
Click on the Speaker icon in the system tray at the bottom
right of the Desktop screen and turn up the volume in the
popup window.
The volume of the S Player controls the volume of the S
Player application only and not the volume of the system
sound.
can only make a recording up to 3 hours with the S
Q2. ICamera.
A
When you make a recording, the Windows 8 OS asks
the application to stop after 3 hours. To make a longer
recording, make a recording for 3 hours, stop the recording
and then start a new recording. This allows you to make
another 3 hour recording. The recording time limit may
differ depending on the operating system.
can play a file saved on an external storage device
Q3. Ibut
cannot add the file to the playlist in the S Player.
A
The application is designed so that only files in the Library
can be added to the playlist.
116
Others
Q1
A
You can configure your computer in the same way as
existing Windows systems.
If you want to start your computer in DOS via a USB device,
set the Fast BIOS Mode item in the Advanced menu in the
BIOS Setup to On before using this feature.
Chapter 6.
Appendix
Important Safety Information
118
Replacement Parts and Accessories
120
Regulatory Compliance Statements
122
WEEE Symbol Information
137
Samsung Packaging Take-Back Program
138
TCO Certified (for corresponding models only)
139
Product Specifications
140
Glossary
142
Index
146
Important Safety Information
Safety Instructions
Your system is designed and tested to meet the latest standards
for safety of information technology equipment. However, to
ensure safe use of this product, it is important that the safety
instructions marked on the product and in the documentation are
followed.
Always follow these instructions to help guard against
personal injury and damage to your system.
Setting Up your System
•• Read and follow all instructions marked on the product and in
the documentation before you operate your system. Retain all
safety and operating instructions for future use.
•• Do not use this product near water or a heat source such as a
radiator.
Chapter 6
Appendix
118
•• If your computer has a voltage selector switch, make sure that
the switch is in the proper position for your area.
•• Openings in the computer case are provided for ventilation.
Do not block or cover these openings. Make sure you provide
adequate space, at least 6 inches (15 cm), around the system
for ventilation when you set up your work area. Never insert
objects of any kind into the computer ventilation openings.
•• Ensure that the fan vents on the bottom of the casing are clear
at all times. Do not place the computer on a soft surface, doing
so will block the bottom vents.
•• If you use an extension cord with this system, make sure that the
total power rating on the products plugged into the extension
cord does not exceed the extension cord power rating.
•• For Notebooks with glossy display bezels the user should
consider the placement of the Notebook as the bezel may
cause disturbing reflections from surrounding light and bright
surfaces.
•• Set up the system on a stable work surface.
•• The product should be operated only with the type of power
source indicated on the rating label.
•• Ensure that the electrical outlet you are using to power your
equipment is easily accessible in case of fire or short circuit.
Ver 3.3
Important Safety Information
Chapter 6
Appendix
119
Care During Use
The Instruction On Safety Operation of NotePC
•• Do not walk on the power cord or allow anything to rest on it.
1. When installing and operating devices please refer to safety
requirements in the user guide.
•• Do not spill anything on the system. The best way to avoid
spills is to not eat or drink near your system.
•• Some products have a replaceable CMOS battery on the
system board. There is a danger of explosion if the CMOS
battery is replaced incorrectly. Replace the battery with the
same or equivalent type recommended by the manufacturer.
Dispose of batteries according to the manufacturers
instructions. If the CMOS battery requires replacement insure
that a qualified technician performs the task.
•• When the computer is turned off, a small amount of electrical
current still flows through the computer.
To avoid electrical shock, always unplug all power cables,
remove the battery and modem cables from the wall outlets
before cleaning the system.
•• Unplug the system from the wall outlet and refer servicing to
qualified personnel if:
– The power cord or plug is damaged.
– Liquid has been spilled into the system.
– The system does not operate properly when the operating
instructions are followed.
– The system was dropped or the casing is damaged.
– The system performance changes.
2. Devices can be used only with the equipment specified in the
technical specifications of the devices.
3. If any smell of burning or smoke is detected from the computer
the unit should be switched off and battery removed. The unit
should be checked by a qualified technician before reuse.
4. Service and repair of devices should be carried out by
authorized service centers.
5. Do not allow your portable computer to operate with the base
resting directly on exposed skin for extended periods of time.
The surface temperature of the base will rise during normal
operation (particularly when AC Power is present). Allowing
sustained contact with exposed skin can cause discomfort or
eventually a burn.
Replacement Parts and Accessories
Use only replacement parts and accessories recommended by
manufacturer.
To reduce the risk of fire, use only No. 26 AWG or larger
telecommunications line cord.
Do not use this product in areas classified as hazardous.
Such areas include patient care areas of medical and dental
facilities, oxygen rich environments, or industrial areas.
Chapter 6
Appendix
120
Laser Safety
All systems equipped with CD or DVD drives comply with the
appropriate safety standards, including IEC 60825-1. The laser
devices in these components are classified as “Class 1 Laser
Products” under a US Department of Health and Human Services
(DHHS) Radiation Performance Standard. Should the unit ever
need servicing, contact an authorized service location.
•• Laser Safety Note:
Battery Disposal
Do not put rechargeable batteries or products powered by
non-removable rechargeable batteries in the garbage.
Use of controls or adjustments or performance of
procedures other than those specified in this manual
may result in hazardous radiation exposure. To prevent
exposure to laser beams, do not try to open the enclosure
of a CD or DVD drive.
•• Class 1M laser radiation when operating part is open.
Contact the Samsung Helpline for information on how to dispose
of batteries that you cannot use or recharge any longer.
Do not view directly with optical instruments.
Follow all local regulations when disposing of old batteries.
•• Class 3B invisible laser radiation when open.
Avoid exposure to the beam.
THERE IS A RISK OF EXPLOSION IF BATTERY IS REPLACED BY
AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.
Replacement Parts and Accessories
Connect and Disconnect the AC adapter
The socket-outlet shall be installed near the equipment and shall
be easily accessible.
Do not unplug the power cord by pulling the cable only.
Power Cord Requirements
The power cord set (wall plug, cable and AC adapter plug) you
received with your computer meets the requirements for use in
the country where you purchased your equipment.
Power cord sets for use in other countries must meet the
requirements of the country where you use the computer. For
more information on power cord set requirements, contact your
authorized dealer, reseller, or service provider.
Chapter 6
Appendix
121
General Requirements
The requirements listed below are applicable to all countries:
•• All power cord sets must be approved by an acceptable
accredited agency responsible for evaluation in the country
where the power cord set will be used.
•• The power cord set must have a minimum current capacity
of 7 A and a nominal voltage rating of 125 or 250 volts AC, as
required by each country’s power system. (USA ONLY)
•• The appliance coupler must meet the mechanical configuration
of an EN 60 320/IEC 320 Standard Sheet C7 (or C5) connector,
for mating with appliance inlet on the computer.
Regulatory Compliance Statements
Wireless Guidance
(If fitted with 2.4G band or 5G band)
Low power, Radio LAN type devices (radio frequency (RF) wireless
communication devices), operating in the 2.4GHz/5GHz Band, may
be present (embedded) in your notebook system. The following
section is a general overview of considerations while operating a
wireless device.
Additional limitations, cautions, and concerns for specific countries
are listed in the specific country sections (or country group
sections). The wireless devices in your system are only qualified for
use in the countries identified by the Radio Approval Marks on the
system rating label. If the country you will be using the wireless
device in, is not listed, please contact your local Radio Approval
agency for requirements. Wireless devices are closely regulated
and use may not be allowed.
The RF field strength of the wireless device or devices that may
be embedded in your notebook are well below all international
RF exposure limits as known at this time. Because the wireless
devices (which may be embedded into your notebook) emit less
energy than is allowed in radio frequency safety standards and
recommendations, manufacturer believes these devices are safe
using. Regardless of the power levels, care should be taken to
minimize human contact during normal operation.
Some circumstances require restrictions on wireless devices.
Examples of common restrictions are listed on the next page:
Chapter 6
Appendix
122
• Radio frequency wireless communication can interfere
with equipment on commercial aircraft. Current aviation
regulations require wireless devices to be turned off while
traveling in an airplane.
802.11ABGN (also known as wireless Ethernet or Wifi) and
Bluetooth communication devices are examples of devices
that provide wireless communication.
• In environments where the risk of interference to other
devices or services is harmful or perceived as harmful,
the option to use a wireless device may be restricted or
eliminated. Airports, Hospitals, and Oxygen or flammable
gas laden atmospheres are limited examples where use
of wireless devices may be restricted or eliminated. When
in environments where you are uncertain of the sanction
to use wireless devices, ask the applicable authority for
authorization prior to use or turning on the wireless device.
• Every country has different restrictions on the use of
wireless devices. Since your system is equipped with
a wireless device, when traveling between countries
with your system, check with the local Radio Approval
authorities prior to any move or trip for any restrictions on
the use of a wireless device in the destination country.
• If your system came equipped with an internal embedded
wireless device, do not operate the wireless device unless
all covers and shields are in place and the system is fully
assembled.
Regulatory Compliance Statements
• Wireless devices are not user serviceable. Do not modify
them in any way. Modification to a wireless device will void
the authorization to use it. Please contact manufacturer for
service.
• Only use drivers approved for the country in which
the device will be used. See the manufacturer System
Restoration Kit, or contact manufacturer Technical Support
for additional information.
Chapter 6
Appendix
123
United States of America
USA and Canada Safety Requirements and Notices
Do not touch or move antenna while the unit is transmitting or
receiving.
Do not hold any component containing the radio such that the
antenna is very close or touching any exposed parts of the body,
especially the face or eyes, while transmitting.
Do not operate the radio or attempt to transmit data unless the
antenna is connected; if not, the radio may be damaged.
Use in specific environments:
The use of wireless devices in hazardous locations is limited by the
constraints posed by the safety directors of such environments.
The use of wireless devices on airplanes is governed by the Federal
Aviation Administration (FAA).
The use of wireless devices in hospitals is restricted to the limits
set forth by each hospital.
Explosive Device Proximity Warning
Do not operate a portable transmitter (such as a wireless
network device) near unshielded blasting caps or in an
explosive environment unless the device has been modified
to be qualified for such use.
Regulatory Compliance Statements
Use On Aircraft Caution
Regulations of the FCC and FAA prohibit airborne operation
of radio-frequency wireless devices because their signals
could interfere with critical aircraft instruments.
Other Wireless Devices
Safety Notices for Other Devices in the Wireless Network:
Refer to the documentation supplied with wireless Ethernet
adapters or other devices in the wireless network.
The Part 15 radio device operates on a non-interference basis
with other devices operating at this frequency. Any changes
or modification to said product not expressly approved by
Intel could void the user’s authority to operate this device.
Chapter 6
Appendix
124
Unintentional Emitter per FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:(1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply
with the limits for a Class B digital device pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy. If not installed
and used in accordance with the instructions, it may cause
harmful interference. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
•• Reorient or relocate the receiving antenna.
•• Increase the separation between the equipment and
receiver.
•• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
•• Consult the dealer or an experienced radio/TV technician
for help.
Regulatory Compliance Statements
If necessary, the user should consult the dealer or an experienced
radio/television technician for additional suggestions. The user
may find the following booklet helpful: “Something About
Interference.”
This is available at FCC local regional offices. Our company is not
responsible for any radio or television interference caused by
unauthorized modifications of this equipment or the substitution
or attachment of connecting cables and equipment other than
those specified by our company. The correction will be the
responsibility of the user. Use only shielded data cables with this
system.
Intentional emitter per FCC Part 15
(If fitted with 2.4G band or 5G band)
Low power, Radio LAN type devices (radio frequency (RF) wireless
communication devices), operating in the 2.4GHz/5GHz Band, may
be present (embedded) in your notebook system. This section is
only applicable if these devices are present. Refer to the system
label to verify the presence of wireless devices.
Wireless devices that may be in your system are only qualified for
use in the United States of America if an FCC ID number is on the
system label.
Chapter 6
Appendix
125
This device is restricted to indoor use due to its operation in the
5.15 to 5.25 GHz frequency range. FCC requires this product to be
used indoors for the frequency range 5.15 to 5.25 GHz to reduce
the potential for harmful interference to co-channel Mobile
Satellite systems. High power radars are allocated as primary users
of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar
stations can cause interference with and /or damage this device.
Operation of this device is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation of the device.
Wireless devices are not user serviceable. Do not modify
them in any way.
Modification to a wireless device will void the authorization
to use it. Contact manufacturer for service.
Regulatory Compliance Statements
Health and safety information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Chapter 6
Appendix
126
SAR level of the device while operating can be well below the
maximum value. This is because the device is designed to operate
at multiple power levels so as to use only the power required to
reach the network. In general, the closer you are to a wireless base
station antenna, the lower the power output.
This product can contain an embedded radio transmitter and
receiver. It is designed and manufactured not to exceed the
exposure limits for radio frequency (RF) energy set by the Federal
Communications Commission (FCC) of the U.S. government. These
FCC exposure limits are derived from the recommendations of two
expert organizations, the National Council on Radiation Protection
and Measurement (NCRP) and the Institute of Electrical and
Electronics Engineers (IEEE). In both cases, the recommendations
were developed by scientific and engineering experts drawn from
industry, government, and academia after extensive reviews of the
scientific literature related to the biological effects of RF energy.
Before a new model is available for sale to the public, it must
be tested and certified to the FCC that it does not exceed the
exposure limit established by the FCC. Tests for each model are
performed in positions and locations (e.g. at the bottom on the
body) as required by the FCC.
The exposure limit set by the FCC for wireless devices employs a
unit of measurement known as the Specific Absorption Rate (SAR).
The SAR is a measure of the rate of absorption of RF energy by the
human body expressed in units of watts per kilogram (W/kg). The
FCC requires wireless devices to comply with a safety limit of 1.6
watts per kilogram (1.6 W/kg). The FCC exposure limit incorporates
a substantial margin of safety to give additional protection to the
public and to account for any variations in measurements.
SAR information on this and other model can be viewed on-line
at http://www.fcc.gov/oet/ea/fccid/. This site uses this product FCC
ID number on the outside of the product. Sometimes it may be
necessary to remove the battery pack to find the number. Once
you have the FCC ID number for a particular product, follow the
instructions on the website and it should provide values for typical
or maximum SAR for a particular product.
SAR tests are conducted using standard operating positions
accepted by the FCC with the wireless transmitting at its highest
certified power level in all tested frequency bands. Although the
SAR is determined at the highest certified power level, the actual
For body worn operation, this model has been tested and meets
the FCC RF exposure guidelines when used with Samsung
accessory designated for this product. Non-compliance with the
above restrictions may result in violation of FCC RF exposure
guidelines.
Regulatory Compliance Statements
Canada
Unintentional Emitter per ICES-003
This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus as set out in the radio
interference regulations of Industry Canada.
Le présent appareil numérique n’émet pas de bruits
radioélectriques dépassant les limitesapplicables aux appareils
numériques de Classe B prescrites dans le règlement sur le
brouillage radioélectrique édicté par Industrie Canada.
Intentional Emitter per RSS 210
This device complies with RSS 210 of Industry Canada. Operation
is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of this
device.”
L‘ utilisation de ce dispositif est autorisée seulement aux
conditions suivantes : (1) il ne doit pas produire de brouillage et (2)
l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage
radioélectrique reçu, même si ce brouillage est susceptible de
compromettre le fonctionnement du dispositif.
Chapter 6
Appendix
127
The term “IC” before the equipment certification number only
signifies that the Industry Canada technical specifications were
met. To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (EIRP) is not more than that required
for successful communication. To prevent radio interference
to the licensed service, this device is intended to be operated
indoors and away from windows to provide maximum shielding.
Equipment (or its transmit antenna) that is installed outdoors is
subject to licensing.
Pour empecher que cet appareil cause du brouillage au service
faisant l’objet d’une licence, il doit etre utilize a l’interieur et devrait
etre place loin des fenetres afin de Fournier un ecram de blindage
maximal. Si le matriel (ou son antenne d’emission) est installe a
l’exterieur, il doit faire l’objet d’une licence.
(If fitted with 2.4G band or 5G band)
Low power, Radio LAN type devices (radio frequency (RF) wireless
communication devices), operating in the 2.4GHz/5GHz Band, may
be present (embedded) in your notebook system. This section is
only applicable if these devices are present. Refer to the system
label to verify the presence of wireless devices.
Wireless devices that may be in your system are only qualified for
use in Canada if an Industry Canada ID number is on the system
label.
When using IEEE 802.11a wireless LAN, this product is restricted to
indoor use due to its operation in the 5.15- to 5.25-GHz frequency
Regulatory Compliance Statements
range. Industry Canada requires this product to be used indoors
for the frequency range of 5.15 GHz to 5.25 GHz to reduce the
potential for harmful interference to co-channel mobile satellite
systems. High power radar is allocated as the primary user of the
5.25- to 5.35-GHz and 5.65 to 5.85-GHz bands. These radar stations
can cause interference with and/or damage to this device.
The maximum allowed antenna gain for use with this device
is 6dBi in order to comply with the E.I.R.P limit for the 5.25- to
5.35 and 5.725 to 5.85 GHz frequency range in point-to-point
operation.
The power output of the wireless device (or devices), which may
be embedded in your notebook, is well below the RF exposure
limits as set by Industry Canada.
Operation of this device is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation of the device.
To prevent radio interference to licensed service, this device
is intended to be operated indoors and away from windows
to provide maximum shielding. Equipment (or its transmit
antenna) that is installed outdoors is subject to licensing.
Wireless devices are not user serviceable. Do not modify
them in any way. Modification to a wireless device will void
the authorization to use it. Contact manufacturer for service.
Chapter 6
Appendix
128
(Si l’appareil est équipé d’une bande 2,4 G ou 5 G)
Des dispositifs de basse puissance, de type radio LAN
(périphériques de communication sans fil par radiofréquence
RF) fonctionnant sur une bande de 2.4GHz/5GHz sont peutêtre intégrés dans votre appareil. Cette section est applicable
uniquement si ces dispositifs sont présents. Consultez l’étiquette
du système pour vérifiez la présence de dispositifs sans fil.
Les dispositifs sans fil qui peuvent être intégrés dans votre système
sont uniquement aptes pour une utilisation au Canada si l’étiquette
du système présente un nombre d’identification d’Industrie
Canada.
En cas d’utilisation d’un LAN sans fil IEEE 802.11a, ce produit ne
peut être utilisé qu’à l’intérieur en raison de son fonctionnement
dans une plage des fréquences allant de 5,15 à 5,25 GHz. Industrie
Canada exige l’utilisation de ce produit à l’intérieur pour une
plage des fréquences allant de 5,15 à 5,25 GHz afin de réduire
les éventuelles interférences nuisibles avec les systèmes mobiles
par satellite du même canal. Le radar de grande puissance est
considéré comme l’utilisateur principal des bandes de 5,25 à 5,35
GHz et de 5,65 à 5,85 GHz. Ces stations radar peuvent provoquer
des interférences avec ce périphérique et/ou l’endommager.
Le gain d’antenne maximum autorisé avec ce périphérique est
de 6 dBi afin de respecter la limite de P.I.R.E. pour une plage des
fréquences de 5,25 à 5,35 GHz et de 5,725 à 5,85 GHz dans un
fonctionnement point à point.
Regulatory Compliance Statements
La sortie de puissance du dispositif sans fil (ou des dispositifs) qui
peut être intégré dans votre système est bien inférieure aux limites
d’exposition de RF établies par Industrie Canada.
Son utilisation est soumise aux deux conditions suivantes : 1) ce
dispositif ne peut pas provoquer d’interférences nuisibles et 2
2) ce dispositif doit accepter toute interférence reçue, y compris
les interférences qui peuvent provoquer des anomalies dans le
système.
Afin de prévenir des interférences de radio au service
autorisé, ce dispositif est prévu pour être utilisé à l’intérieur et
éloigné des fenêtres pour fournir une protection maximum.
Un équipement (ou son antenne de transmission) qui est
installé à l’extérieur est sujet à une autorisation.
Les dispositifs sans fil ne peuvent pas être réparés par
l’utilisateur. Ne les modifiez en aucune façon. La modification
d’un dispositif sans fil annulera votre autorisation à son
utilisation. Contactez le fabricant pour la réparation.
Chapter 6
Appendix
129
Brazil
Este produto esta homologado pela ANATEL, de acordo com
os procedimentos regulamentados pela Resolucao 242/2000, e
atende aos requisitos tecnicos aplicados.
Este equipamento opera em caráter secundário, isto é, não
tem direito a proteção contra interferência prejudicial, mesmo
de estações do mesmo tipo, e não pode causar interferência a
sistemas operando em caráter primário.
European Union
European Union CE Marking and Compliance Notices
Products intended for sale within the European Union are marked
with the Conformité Européene (CE) Marking, which indicates
compliance with the applicable Directives and European standards
and amendments identified below. This equipment also carries
the Class 2 identifier.
The following information is only applicable to systems labeled
.
with the CE mark
Regulatory Compliance Statements
European Directives
This Information Technology Equipment has been tested and
found to comply with the following European directives:
•• EMC Directive 2004/108/EC
•• Low Voltage Directive 2006/95/EC
•• R&TTE Directive 1999/5/EC
Chapter 6
Appendix
130
European Radio Approval Information
(for products fitted with EU-approved radio devices)
This Product is a Notebook computer; low power, Radio LAN type
devices (radio frequency (RF) wireless communication devices),
operating in the 2.4GHz/5GHz band, may be present (embedded)
in your notebook system which is intended for home or office use.
This section is only applicable if these devices are present. Refer to
the system label to verify the presence of wireless devices.
Wireless devices that may be in your system are only qualified for
use in the European Union or associated areas if a CE mark
with a Notified Body Registration Number and the Alert Symbol is
on the system label.
The power output of the wireless device or devices that may be
embedded in you notebook is well below the RF exposure limits
as set by the European Commission through the R&TTE directive.
The low band 5.15 - 5.35 GHz is for indoor use only.
See 802.11b and 802.11g restrictions for specific countries
or regions within countries under the heading “European
Economic Area Restrictions” below.
Regulatory Compliance Statements
Chapter 6
Appendix
EU R&TTE Compliance Statements
Česky
[Czech]
Samsung tímto prohlašuje, že tento Notebook
PC je ve shodě se základními požadavky a
dalšími příslušnými ustanoveními směrnice
1999/5/ES.
Dansk
[Danish]
Undertegnede Samsung erklærer herved, at
følgende udstyr Notebook PC overholder de
væsentlige krav og øvrige relevante krav i
direktiv 1999/5/EF.
Deutsch
[German]
Hiermit erklärt Samsung, dass sich das Gerät
Notebook PC in Übereinstimmung mit den
grundlegenden Anforderungen und den
übrigen einschlägigen Bestimmungen der
Richtlinie 1999/5/EG befindet.
Eesti
[Estonian]
Käesolevaga kinnitab Samsung seadme
Notebook PC vastavust direktiivi 1999/5/
EÜ põhinõuetele ja nimetatud direktiivist
tulenevatele teistele asjakohastele sätetele.
English
Hereby, Samsung, declares that this Notebook
PC is in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC.
Español
[Spanish]
Por medio de la presente Samsung declara
que el Notebook PC cumple con los requisitos
esenciales y cualesquiera otras disposiciones
aplicables o exigibles de la Directiva 1999/5/CE.
131
Ελληνική
[Greek]
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Samsung ΔΗΛΩΝΕΙ ΟΤΙ
Notebook PC ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ
ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ
ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
Français
[French]
Par la présente Samsung déclare que l’appareil
Notebook PC est conforme aux exigences
essentielles et aux autres dispositions
pertinentes de la directive 1999/5/CE.
Italiano
[Italian]
Con la presente Samsung dichiara che questo
Notebook PC è conforme ai requisiti essenziali
ed alle altre disposizioni pertinenti stabilite
dalla direttiva 1999/5/CE.
Latviski
[Latvian]
Ar šo Samsung deklarē, ka Notebook PC atbilst
Direktīvas 1999/5/EK būtiskajām prasībām un
citiem ar to saistītajiem noteikumiem.
Šiuo Samsung deklaruoja, kad šis Notebook PC
Lietuvių
atitinka esminius reikalavimus ir kitas 1999/5/
[Lithuanian]
EB Direktyvos nuostatas.
Nederlands
[Dutch]
Hierbij verklaart Samsung dat het toestel
Notebook PC in overeenstemming is met
de essentiële eisen en de andere relevante
bepalingen van richtlijn 1999/5/EG.
Malti
[Maltese]
Hawnhekk, Samsung, jiddikjara li dan
Notebook PC jikkonforma mal-ħtiāijiet
essenzjali u ma provvedimenti oħrajn relevanti
li hemm fid-Dirrettiva 1999/5/EC.
Regulatory Compliance Statements
Alulírott, Samsung nyilatkozom, hogy a
Magyar
Notebook PC megfelel a vonatkozó alapvetõ
[Hungarian] követelményeknek és az 1999/5/EC irányelv
egyéb elõírásainak.
Polski
[Polish]
Niniejszym Samsung oświadcza, Ŝe Notebook
PC jest zgodny z zasadniczymi wymogami oraz
pozostałymi stosownymi postanowieniami
Dyrektywy 1999/5/EC.
Samsung declara que este Notebook PC está
Português
conforme com os requisitos essenciais e outras
[Portuguese]
disposições da Directiva 1999/5/CE.
Slovensko
[Slovenian]
Samsung izjavlja, da je ta Notebook PC v skladu
z bistvenimi zahtevami in ostalimi relevantnimi
določili direktive 1999/5/ES.
Slovensky
[Slovak]
Samsung týmto vyhlasuje, že Notebook PC
spĺňa základné požiadavky a všetky príslušné
ustanovenia Smernice 1999/5/ES.
Suomi
[Finnish]
Samsung vakuuttaa täten että Notebook
PC tyyppinen laite on direktiivin 1999/5/
EY oleellisten vaatimusten ja sitä koskevien
direktiivin muiden ehtojen mukainen.
Svenska
[Swedish]
Härmed intygar Samsung att denna Notebook
PC står I överensstämmelse med de väsentliga
egenskapskrav och övriga relevanta
bestämmelser som framgår av direktiv 1999/5/
EG.
Chapter 6
Appendix
Íslenska
[Icelandic]
132
Hér með lýsir Samsung yfir því að Notebook PC
er í samræmi við grunnkröfur og aðrar kröfur,
sem gerðar eru í tilskipun 1999/5/EC.
Samsung erklærer herved at utstyret Notebook
Norsk
PC er i samsvar med de grunnleggende krav og
[Norwegian]
øvrige relevante krav i direktiv 1999/5/EF.
Türkiye
[Türkçe]
Bu belge ile, Samsung bu Notebook PC’nin
1999/5/EC Yönetmeliğinin temel gerekliliklerine
ve ilgili hükümlerine uygun olduğunu beyan
eder.
Regulatory Compliance Statements
To view the EU Declaration of Conformity for this product (in
English only), go to: http://www.samsung.com/uk/support/main/
supportMain.do or http://www.samsung.com/uk/support then
search the model number of the product.
If the Declaration of Conformity for the model you are interested
in is not available on our web-site, please contact your distributor
or below address.
[email protected]
Manufacturer Information
Samsung Electronics Co., Ltd.
416, Maetan-3Dong, Yeongtong-Gu, Suwon-City, Gyeonggi-Do,
443-742, Korea
Samsung Electronics Suzhou Computer Co., Ltd.
No. 198, Fangzhou Road, Suzhou Industrial Park, Jiangsu Province,
215021, China
Tel: +86-512-6253-8988
Samsung Electronics Vietnam Co., Ltd.
Yen Phong 1, I.P Yen Trung Commune, Yen Phong Dist., Bac Ninh
Province, Vietnam
For the web or the phone number of Samsung Service Centre, see
the Warranty or contact the retailer where you purchased your
product.
Chapter 6
Appendix
133
European Economic Area Restrictions
Local Restriction of 802.11b/802.11g Radio Usage
[Note to integrator: The following statements on local restrictions
must be published in all end-user documentation provided with
the system or product incorporating the wireless product.]
Due to the fact that the frequencies used by 802.11b/802.11g
wireless LAN devices may not yet be harmonized in all
countries, 802.11b/802.11g products are designed for use
only in specific countries or regions, and are not allowed
to be operated in countries or regions other than those of
designated use.
As a user of these products, you are responsible for ensuring
that the products are used only in the countries or regions
for which they were intended and for verifying that they
are configured with the correct selection of frequency and
channel for the country or region of use. Any deviation from
permissible settings and restrictions in the country or region
of use could be an infringement of local law and may be
punished as such.
Regulatory Compliance Statements
The European variant is intended for use throughout the European
Economic Area. However, authorization for use is further restricted
in particular countries or regions within countries, as follows:
General
European standards dictate maximum radiated transmit power
of 100 mW effective isotropic radiated power (EIRP) and the
frequency range 2400 – 2483.5 MHz.
The low band 5.15 - 5.35 GHz is for indoor use only.
Belgium
The product may be used outdoors, but for outdoor transmissions
over a distance of 300m or more, a license from the BIPT is
required.
This restriction should be indicated in the manual as follows:
Dans le cas d’une utilisation privée, à l’extérieur d’un bâtiment, audessus d’un espace public, aucun enregistrement n’est nécessaire
pour une distance de moins de 300m. Pour une distance
supérieure à 300m un enregistrement auprès de l’IBPT est requise.
Pour une utilisation publique à l’extérieur de bâtiments, une
licence de l’IBPT est requise. Pour les enregistrements et licences,
veuillez contacter l’IBPT.
France
The low band 5.15 - 5.35 GHz is for indoor use only.
Chapter 6
Appendix
134
RTC CAUTION
CAUTION : Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended
by the manufacturer. Discard used batteries according to the
Manufacturer’s instruction.
Attention: Danger d’explosion si les piles sont mal palcées.
Remplacez les piles usagées uniquement par des piles de type
identique ou équivalent recommandees par is fabriquant. Otez les
piles usagées selon les instructions du fabriquant.
Adapter Information
Vendor
CHICONY
Company Name
CHICONY POWER TECHNOLOGY CO.,LTD
Adapter Model Name
A12-040N1A
Regulatory Compliance Statements
RF Exposure (for corresponding 3G models only)
General Statement on RF energy
Your wireless WAN embedded PC contains a transmitter and a
receiver. When it is ON, it receives and transmits RF energy. When
you communicate with your Notebook PC, the system handling
your connection controls the power level at which your Notebook
PC transmits.
Specific Absorption Rate (SAR) certification information
This wireless WAN embedded PC is included a radio transmitter
and receiver. It is designed not to exceed the limits for exposure
to radio waves recommended by international guidelines.
These guidelines were developed by the independent scientific
organization ICNIRP and include safety margins designed to assure
the protection of all persons, regardless of age and health.
The guidelines use a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit for mobile devices is 2.0 W/
kg and the highest SAR value for this device when tested at the
body was 0.565 W/kg. (SAR measurement distance is 0 cm from
the phantom)
As SAR is measured utilizing the devices highest transmitting
power the actual SAR of this device while operating is typically
below that indicated above. This is due to automatic changes to
the power level of the device to ensure it only uses the minimum
Chapter 6
Appendix
135
level required to reach the network.
The World Health Organization has stated that present scientific
information does not indicate the need for any special precautions
for the use of mobile devices. They note that if you want to reduce
your exposure then you can do so by limiting the length of calls to
keep the mobile devices away from the head and body.
Limiting exposure to radio frequency (RF) fields
For individuals concerned about limiting their exposure to
RF fields, the World Health Organisation (WHO) provides the
following advice:
Precautionary measures: Present scientific information does not
indicate the need for any special precautions for the use of the
Notebook PC. If individuals are concerned, they might choose
to limit their own or their children’s RF exposure by limiting the
length of connections.
Further information on this subject can be obtained from the
WHO home page http://www.who.int/peh-emf
WHO Fact sheet 193: June 2000.
Regulatory Compliance Statements
Declaration of Conformity
(for corresponding 3G models only)
Product details
Chapter 6
Appendix
136
EN 300 440-2 V1.4.1 (08-2010) EN 301 511 V9.0.2 (03-2003)
EN 302 291-1 V1.1.1 EN 301 908-1 V5.2.1 (05-2011)
EN 302 291-2 V1.1.1 EN 301 908-2 V5.2.1 (07-2011)
and the Eco-Design Directive (2009/125/EC) implemented by
Regulations (EC) No 1275/2008 for standby and off mode electric
power consumption and (EC) No 278/2009 for external power
supplies and the Directive (2011/65/EU) on the restriction of the
use of certain hazardous substances in electrical and electronic
equipment.
For the following
Product : Notebook PC (Tablet PC)
Model(s) : XE700T1C
Declaration & Applicable standards
We hereby declare, that the product above is in compliance with
the essential requirements of the R&TTE Directive (1999/5/EC) by
application of the standards below.
This product also meets the essential requirements and other
relevant provisions of the EMC Directive (2004/108/EC) and the
LVD Directive (2006/95/EC).
EN 60950-1:2006+A11:2009/A1:2010/A12:2011 EN 55022:2006+A1:2007 EN 62311 : 2008
EN 55024:1998+A1:2001+A2:2003
EN 61000-3-2:2006+A2:2009 EN 61000-3-3:2008
EN 301 489-01 V1.9.2 (09-2011) EN 301 489-03 V1.4.1 (2002)
EN 301 489-07 V1.3.1 (11-2005) EN 301 489-17 V2.1.1 (05-2009)
EN 301 489-24 V1.5.1 (10-2010) EN 300 328 V1.7.1 (10-2006)
EN 300 440-1 V1.6.1 (08-2010) EN 301 893 V1.6.1 (11-2011)
Representative in the EU
(YEAR TO BEGIN AFFIXING CE MARKING 2012)
Samsung Electronics Euro QA Lab.
Blackbushe Business Park
Saxony Way, Yateley, Hampshire
GU46 6GG, UK
02 October 2012
(Place and date of issue)
Joong-Hoon Choi/Lab. Manager
(Name and signature of authorized person)
WEEE Symbol Information
Correct disposal of this product
(Waste Electrical & Electronic Equipment)
Chapter 6
Appendix
137
Correct disposal of batteries in this product
Pb
(Applicable in countries with separate collection systems)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that
the product and its electronic accessories (e.g. charger, headset, USB
cable) should not be disposed of with other household waste at the
end of their working life.
This marking on the battery, manual or packaging indicates that
the batteries in this product should not be disposed of with other
household waste at the end of their working life. Where marked,
the chemical symbols Hg, Cd or Pb indicate that the battery contains
mercury, cadmium or lead above the reference levels in EC Directive
2006/66. If batteries are not properly disposed of, these substances
can cause harm to human health or the environment.
To prevent possible harm to the environment or human health
from uncontrolled waste disposal, please separate these items from
other types of waste and recycle them responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they
purchased this product, or their local government office, for details
of where and how they can take these items for environmentally safe
recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product and its electronic
accessories should not be mixed with other commercial wastes for
disposal.
India Only
For more information on safe disposal and recycling visit our
website www.samsung.com/in or contact our Helpline numbers 18002668282, 180030008282.
To protect natural resources and to promote material re-use, please
separate batteries from other types of waste and recycle them
through your local, free battery return system.
USA ONLY
This Perchlorate warning applies only to primary CR
(Maganese Dioxide) Lithium coin cells in the product sold or
distributed ONLY in California USA.
“Perchlorate Material- special handling may apply, See www.dtsc.
ca.gov/hazardouswaste/perchlorate.”
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website:
www.samsung.com/recyclingdirect Or call, (877) 278-0799
For battery recycling go to call2recycle.org; or call 1-877-723-1297
Warning : This product contains chemicals known to the state of
California to cause cancer and reproductive toxicity.
Samsung Packaging Take-Back Program
In partnering with select recyclers, Samsung offers packaging
take-back at no cost to you.
Simply call the following number for the locations nearest you.
CRT Processing, LLC
(877) 278-0799
Kathy Severson – Logistics contact
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website:
www.samsung.com/recyclingdirect Or call, (877) 278-0799
Chapter 6
Appendix
138
TCO Certified (for corresponding models only)
Chapter 6
Appendix
139
Congratulations!
Some of the Environmental features of TCO Certified Tablets
This product is designed for both you and the planet!
•• Production facilities have an Environmental Management
System (EMAS or ISO 14001)
The product you have just purchased carries the
TCO Certified label. This ensures it is designed,
manufactured and tested according to some of
the strictest quality and environmental
requirements in the world. This makes for a high performance
product, designed with the user in focus that also minimizes the
impact on the climate and our natural environment.
TCO Certified is a third party verified program, where every
product model is tested by an accredited impartial test laboratory.
TCO Certified represents one of the toughest certifications for ICT
products worldwide.
Some of the Usability features of TCO Certified Tablets
•• Visual Ergonomics for image quality is tested to ensure top
performance and reduce sight and strain problems. Important
parameters are Resolution, Luminance, Contrast, Reflection
and Colour characteristics
•• Products are tested according to rigorous safety standards at
impartial laboratories
•• Electric and Magnetic field emissions as low as normal
household background levels
•• Workload ergonomics to ensure a good physical environment
•• Low energy consumption to minimize climate impact
•• Mercury free
•• Restrictions on Chlorinated and Brominated flame retardants,
plasticizers, plastics and heavy metals such as cadmium and
lead (RoHS compliance)
•• Both product and product packaging is prepared for recycling
•• The brand owner offers take-back options
Corporate Social Responsibility
The brand owner demonstrates the product is manufactured
under working practices that promote good labour relations and
working conditions.
The Criteria Document can be downloaded from our web site.
The criteria included in this label have been developed by TCO
Development in co-operation with scientists, experts, users as
well as manufacturers all over the world. Since the end of the
1980s TCO has been involved in influencing the development of IT
equipment in a more user and environmentally friendly direction.
Our ICT product labeling system began in 1992 and is now
requested by users and ICT-manufacturers all over the world.
For more information, please visit
www.tcodevelopment.com
Product Specifications
The system specifications may differ depending on the derived
models.
For detailed system specifications, refer to the product catalogue.
Chapter 6
Appendix
•• Optional components may not be provided or different
components may be provided depending on the computer
model.
•• The system specifications are subject to change without
notice.
CPU
(Optional)
Intel® i3/i5 (Core) / Pentium Processor
Main Memory
Memory type: DDR3 SDRAM on board
•• The Storage device capacity of a computer in which
Recovery program is installed, is represented as smaller
than the product specification.
Main Chipset
(Optional)
Intel HM76
•• The amount of memory that Windows can use may be
smaller than the actual amount of memory available.
Storage Device
SSD
Graphics (Optional)
Operating
Environment
AC/DC Rating
PC Rating
Intel® Celeron Processor
Intel NM70
Intel HD Graphics (Internal)
Intel HD Graphics 4000 (Internal)
Temperature: -5~40°C for storage,
10~35°C when operating
Humidity: 5~90% for storage,
20~80% when operating
Input: 100-240VAC, 50 ~ 60Hz,
Output: 1
2VDC 3.33A
12VDC 3.33A (40W)
140
•• Replacing or adding a memory module for this product is
not supported due to the product design.
To replace the storage device(SSD) of this product, please
ask for assistance from the service center.
Product Specifications
Registered Trademarks
Samsung is a registered trademark of Samsung Co., Ltd.
Intel, Core/Pentium are registered trademarks of the Intel
Corporation.
Microsoft, MS-DOS, and Windows are registered trademarks of the
Microsoft Corporation.
The terms HDMI and HDMI High-Definition Multimedia Interface,
and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
All other product or company names mentioned herein are
registered trademarks of their respective companies.
Chapter 6
Appendix
HDMI
141
Glossary
Chapter 6
Appendix
142
The Glossary lists the terminologies used in this User Guide. For terminologies other than these, look in Windows Help.
Backup
DHCP (Dynamic Host Configuration Protocol)
A way to save the current data to restore it later if necessary.
A backup is a way to restore computer data when the data or
computer is damaged.
This refers to automatically allocating IP addresses to the users on
the network by the network administrators.
Chargeable USB
An application interface developed to enable Windows application
programs to access hardware devices at a very high speed. Since
the operating speed of graphics, memory and sound cards must be
very fast to provide high quality video and sound for games, Direct
X enables faster control and interaction between applications and
hardware devices. By using Direct X, the multimedia performance
of Windows has been hugely improved.
This program enables supplying power to a specific USB port when
the system is in power saving mode, hibernation mode or off.
Client
This refers to a computer that uses a shared network resource
provided by a server.
DDR SDRAM
(Double Data Rate Synchronous Dynamic Random Access Memory)
DRAM is a memory type whose cells consist of a capacitor and
transistor manufactured at a low price. SDRAM is a memory type
whose performance has been improved by synchronizing the clock
with the external CPU clock. DDR SDRAM is a memory type whose
performance has been improved by doubling the operating speed
of the SDRAM and is widely used nowadays. This computer uses
DDR SDRAM.
Device Manager
An administrative tool used to manage computer devices. You can
add or remove hardware or update a device driver using the Device
Manager.
Direct X
Driver
Software that interacts between the hardware and the operating
system. An operating system knows the hardware information
and controls the hardware. In general, a driver is supplied with the
corresponding hardware device.
D-sub (D-subminiature)
This is the cable connecting a general CRT monitor and the
computer. Analog video is output through this cable.
Glossary
Chapter 6
Appendix
143
DVD (Digital Versatile Disk)
Icon
DVD was developed to replace CD (compact disk). Although the
shape and size of the disc are the same as that of a CD, the capacity
of a DVD is at least 4.7GB while the capacity of a CD is 600MB. DVD
video is digital unlike VHS (analog) video and supports MPEG2
compression and digital audio. To play a DVD, a DVD drive is
required.
This refers to a small image that represents a file that users can use.
Firewall
A communications network connecting computers, printers and
other devices within a local area such as within a building. A LAN
enables all connected devices to interact with other devices on the
network. The current LAN uses the Ethernet media access control
method developed in the early 1980s. To connect to an Ethernet, a
network card called a LAN card, Ethernet card or network interface
card is required. To exchange data between computers, a protocol
is required besides the hardware equipment. Windows uses TCP/IP
as the default protocol.
A security system used to protect an internal network or intranet
from external networks through an authentication procedure.
HDMI
This is a digital video / audio interface specification that transmits
video and audio signals over a single cable.
Hibernation Mode
A power mode that saves all data in memory to the hard disk and
turns the CPU and hard disk off. When canceling Hibernation Mode,
all application programs that were running are restored to their last
state.
IEEE802.XX
This is a set fo specifications developed by the 802 committee of
IEEE for the LAN connection method called XX.
LAN (Local Area Network)
LCD (Liquid Crystal Display)
There are Passive Matrix and Active Matrix LCD types. This
computer uses the Active Matrix type LCD called a TFT LCD. Since
an LCD is implemented by transistors instead of a cathode-ray tube
unlike a CRT, its size can be slim. And because it does not blink, it
reduces eye strain.
Glossary
Network
Chapter 6
Appendix
144
PCMCIA( Personal Computer Memory Card International
Association) card
A group of computers and devices, such as printers and scanners,
connected by a communications link. A network can be either
small or large and can be connected permanently through cables
or temporarily through telephone lines or wireless links. The
biggest network is the Internet, a worldwide network.
This is an extended card slot specification for mobile computers
such as a notebook computer. Not only a memory, device but also
most peripherals such as hard disk drives, LAN cards, etc. can be
connected to this card slot.
Network Administrator
Protocol
A user who plans, configures and manages network operations.
Sometimes, a network administrator is called a system
administrator.
A protocol is a set of rules used by computers to communicate with
each other across a network. A protocol is a convention or standard
that controls or enables the connection, communication, and
data transfer between computing endpoints. It defines the data
transmission procedures and the transmission medium for more
efficient network functions.
Notification Area
This refers to the right area of the Taskbar including program icons
such as the volume control, the power options and the time.
Partition
This refers to the act or practice of dividing the storage space of
a hard disk drive into separate data areas known as partitions. If a
100GB hard disk drive is partitioned into 2 x 50GB partitions, the
hard disk drive can be used as if there are 2 hard disk drives.
Quick Launch
This refers to a toolbar that can be configured so that you can
launch a program such as Internet Explorer or display the Windows
Desktop with one click. You can add any icon to the quick launch
area of the Taskbar and launch frequently used program by clicking
that icon.
Server
In general, a server refers to a computer that provides shared
resources for network users.
Glossary
Chapter 6
Appendix
Share
USB (Universal Serial Bus)
This refers to setting a resource of a computer such as a folder or
printer so that other users can also use it.
This refers to a serial interface standard developed to replace the
conventional interface standards such as Serial and PS/2.
Shared Folder
A folder that can be used by other users on the network.
Sleep Mode
A power mode that enables computers to save power consumption
when they are not being used. When a computer is in Sleep Mode,
the data on the computer memory is not saved to the hard disk. If
the power is turned off, the data in memory will be lost.
System File
System Files refer to files that are read and used by the Windows
operating system. In general, system files must not be deleted or
moved.
TCP/IPv4
This is a 4 byte (32 bit) address system separated into each byte
(8 bits) by a dot and each byte is represented as a decimal number.
145
The data transmission specifications are one of the interface
standards used to connect a computer to peripheral devices.
These specifications include USB 1.0, 1.1, 2.0 and 3.0.
It is appropriate to support peripheral devices that require high
data rates such as an AV device, secondary HDD or CD-RW.
The higher the version (e.g. USB 3.0), the higher the data rate
provided.
Windows Media Player
A multimedia program included with Windows. Using this
program, you can play a media file, create an audio CD, listen to a
radio broadcast, search and manage media files, and copy files to a
portable device, etc.
Index
Chapter 6
Appendix
A
AP
L
60
B
LCD Brightness
146
S
59
M
Safety Precautions
6
Scroll
44
Supervisor Password
93
Battery
97
Monitor Connection / Output
54
Support Center
89
BIOS Setup
91
Micro SD Card Slot
52
SW Update
88
Booting Priority
96
C
Overview
Charge
97
Click
43
24
Product Specifications
User Password
94
V
P
Password
D
U
O
93
140
Double-Click
43
Drag
43
R
Dual View
54
Recorder
57
Recovery
102
Volume Control
57
W
Wireless Network
60
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement