Acer | Aspire E5-422G | Acer Aspire E5-422 Manuel d’utilisation

Technical Documentation of (EU) No 617/2013
Product type
Product category
Manufacturer name, address
Product model number
Year of manufacture
ETEC allowance with capability
adjustments when discrete graphics cards
are disabled (from 1 July 2014)
ETEC allowance with capability
Notebook computer
A
B
Acer Italy s.r.l,
Via Lepetit, 40, 20020 Lainate (MI) Italy
Aspire E5-422
Aspire E5-422G
2015
37.6 kWh/year
49.6 kWh/year
adjustments when discrete graphics cards Not applicable
are enabled (from 1 July 2014)
ETEC allowance with capability
61.6 kWh/year
28.6 kWh/year
37.6 kWh/year
adjustments when discrete graphics cards Not applicable
are enabled (from 1 January 2016)
Whether all discrete graphics card are
Not applicable
enabled during the test
Whether switchable graphics mode with
Not applicable
UMA is driving the display during the test
ETEC of highest power-demanding
14.88 kWh/year
configuration
Idle state power demand
4.65 Watt
Sleep mode power demand
0.54 Watt
Sleep mode with WOL enabled power
0.49 Watt
demand
Off mode power demand
0.3 Watt
Off mode with WOL enabled power
0.29 Watt
demand
Maximum power demand
Not applicable
Internal power supply (IPS) efficiency at
Not applicable
10 %, 20 %, 50 % and 100 % of rated
49.6 kWh/year
adjustments when discrete graphics cards
are disabled (from 1 January 2016)
ETEC allowance with capability
output power
External power supply's (EPS) average
active efficiency
Noise levels (the declared A-weighted
sound power level, LWAd) of idle mode
Noise levels (the declared A-weighted
sound power level, LWAd) of "HDD random
seek" mode
Minimum number of loading cycles that
the batteries can withstand
Yes
No
15.26 kWh/year
4.9 Watt
0.76 Watt
0.56 Watt
0.33 Watt
0.25 Watt
Not applicable
Not applicable
87.50%
87.50%
3.2 B
3.3 B
3.3 B
3.3 B
400 cycles
400 cycles
Configuration of memory
Configuration of internal storage
Configuration of discrete television tuner
Configuration of discrete audio card
Configuration of discrete graphics cards
Configuration of discrete graphics cards
category
The external package of the notebook
provides the information, "The battery in
this product cannot be easily replaced by
users themselves."
For products with an integrated display,
the total content of mercury is
Measurement methodology for ETEC
2~ 16 GB
1 piece
0 piece
0 piece
0 piece
2~ 16 GB
1 piece
0 piece
0 piece
1 piece
Not applicable
G1
Yes
Yes
0 mg
0 mg
COMMISSION REGULATION (EU) No 617/2013 of
26 June 2013 implementing Directive 2009/125/EC of
the European Parliament and of the Council with
regard to ecodesign requirements for computers and
computer servers:
ANNEX II Ecodesign requirements and timetable:
1.3.1. ETEC formula.
EN 62623:2013 — Desktop and notebook computers
— Measurement of energy consumption:
5.2. Test setup;
5.3.4. Measuring long idle mode;
Measurement methodology for idle mode
5.7. True RMS watt meter specification;
5.8. True RMS watt meter accuracy;
Annex E.2 (informative) ENERGY STAR® V5
compliant testing methodology.
Measurement methodology for sleep
mode
EN 62623:2013 — Desktop and notebook computers
— Measurement of energy consumption:
5.2. Test setup;
5.3.3. Measuring sleep mode;
5.4. Test conditions;
5.7. True RMS watt meter specification;
5.8. True RMS watt meter accuracy.
Measurement methodology for off mode
EN 62623:2013 — Desktop and notebook computers
— Measurement of energy consumption:
5.2. Test setup;
5.3.2. Measuring off mode;
5.4. Test conditions;
5.7. True RMS watt meter specification;
5.8. True RMS watt meter accuracy.
Measurement methodology for IPS
efficiency
Not applicable
Measurement methodology for EPS
efficiency
EN 50563:2011 External a.c.—d.c. and a.c.—a.c.
power supplies — Determination of no-load power
and average efficiency of active modes.
ECMA-109 2nd edition (December 1987) Declared
Noise Emission Values of Computer and Business
Equipment:
4. Determination of the declared noise emission
values.
ECMA-74 11th edition (December 2010)
Measurement of Airborne Noise emitted by
Information Technology and Telecommunications
Measurement methodology for noise level Equipment:
5. Installation and operating instructions;
6. Method for determination of sound power levels of
equipment in reverberation test rooms;
7. Method for determination of sound power levels of
equipment under essentially free-field conditions over
a reflecting plane;
Annex C.15 Equipment category: personal
computers and workstations.
Measurement methodology for battery
loading cycles
EN 61960:2011 Secondary cells and batteries
containing alkaline or other non-acid electrolytes —
Secondary lithium cells and batteries for portable
applications:
7.6.1 General;
7.6.3 Endurance in cycles (accelerated test
procedure).
Sequence of steps for achieving a stable
condition with respect to power demand
EN 62623:2013 — Desktop and notebook computers
— Measurement of energy consumption:
5.2. Test setup;
5.3.2. Measuring off mode;
5.3.3. Measuring sleep mode;
5.3.4. Measuring long idle mode.
Description of how sleep mode was
selected or programmed
EN 62623:2013 — Desktop and notebook computers
— Measurement of energy consumption:
5.2. Test setup;
5.3.3. Measuring sleep mode.
EN 62623:2013 — Desktop and notebook computers
Description of how off mode was selected — Measurement of energy consumption:
5.2. Test setup;
or programmed
5.3.2. Measuring off mode.
ENERGY STAR® Program Requirements Product
Sequence of events required to reach the
Specification for Computers, Eligibility Criteria
mode where the equipment automatically
Version 6.0, Rev. Oct-2013:
changes to sleep mode
1.D.4 Sleep Mode.
Sequence of events required to reach the
mode where the equipment automatically Not applicable
changes to off mode
The duration of idle state condition before
the computer automatically reaches sleep
30 minutes
mode, or another condition which does
not exceed the applicable power demand
requirements for sleep mode
The length of time after a period of user
inactivity in which the computer
automatically reaches a power mode that 30 minutes
has a lower power demand requirement
than sleep mode
The length of time before the display
sleep mode is set to activate after user
inactivity
10 minutes
User information on the energy-saving
potential of power management
functionality
http://www.energystar.gov/index.cfm?c=power_mgt.p
r_power_mgt_users
User information on how to enable the
power management functionality
http://www.energystar.gov/index.cfm?c=power_mgt.p
r_power_mgt_users
Test parameter for ambient temperature
Test parameter for test voltage
Test parameter for frequency
Test parameter for total harmonic
distortion of the electricity supply system
Test parameter for information and
documentation on the instrumentation,
set-up and circuits used for electrical
testing
25 ℃
230 V
50 Hz
3%
AC Power Source EXTECH 6800 SERIES
Power Meter YOKOGAWA WT210
Download PDF