Acer | KG271 | Acer KG271 Quick Start Guide (for KG271 C)

Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
English
Please read the following instructions carefully.
1.
2.
3.
4.
5.
6.
To clean the LCD monitor screen:
•
Turn off the LCD monitor and unplug the power cord.
•
Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage
it.
Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of
any nature.
Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside
this range may result in permanent damage.
Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
•
Monitor-to-PC signal cable is frayed or damaged.
•
Liquid spills onto the LCD monitor or the monitor is exposed to rain.
•
The LCD monitor or case is damaged.
Attaching the monitor to the base
1.
2.
3.
4.
Remove the monitor from the packaging.
Attach the footstand to the base. (for selected models).
Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)
Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected models)
Connecting your monitor to a computer
1.
2.
3.
4.
5.
Turn off your computer and unplug your computer's power cord.
Connect the signal cable to the DVI-D (optional) and/or HDMI
(optional) and/or DP (optional) input socket of the monitor, and
the DVI-D (optional) and/or HDMI (optional) and/or DP (optional)
output socket of the graphics card on the computer. Then tighten the
thumbscrews on the signal cable connector.
Optional: Connect the audio input socket (AUDIO IN) of the LCD
monitor and the line-out port on the computer with the audio cable.
Insert the monitor power cable into the power port at the back of the
monitor.
Plug the power cords of your computer and your monitor into a
nearby electrical outlet.
Note: Audio output is only for audio output model. Please check user manual for more instruction.
FreeSync :
It can allow a FreeSync supported graphics source to dynamically adjust display refresh rate based on typical content
frame rates for power efficient, virtually stutter free and low-latency display update.
1&2 Power button
3
Function key
/
4
5
Function key
Input /
/
Function key
/
6
Function key
/
7
Function key
/
Turns the monitor on/off.Blue indicates power on. Amber indicates standby/
power saving mode.
a. Press to view Main page.Press again to enter next function in the Function
Menu.
b. When the Function Menu is active, press this key selected or move to the
next function.
a. Press to view Main page.Press again to enter Input select function.
b. When the Function Menu is active, press this button selected or move to
the previous function.
a. Press to view Main page.Press again to enter Volume adjustment function.
b. When the Function Menu is active, this button will enter a selection in the
OSD.
a. Press to view Main page. Press again to enter brightness adjustment
function.
b. When the Function Menu is active. Press to return previous Menu or exit
current Menu..
a. When the Main page is active,Press to trigger the Game mode control
b. When the Function Menu is active, press to exit current Menu.
Regulations and safety notices
FCC notices
This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which
can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the device and receiver.
•
Connect the device into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/television technician for help.
CE declaration of conformity
Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements and other relevant
provisions of EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, and RoHS Directive 2011/65/EU and Directive
2009/125/EC with regard to establishing a framework for the setting of ecodesign requirements for energy-related product.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance with EMC
regulations.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached
to this equipment. Operation with non-certified peripherals is likely to result in interference to radio and TV reception.
Caution
Changes or modifications not expressly approved by the manufacturer could void the user authority, which is granted by
the Federal Communications Commission, to operate this product.
In order to prevent damage to the monitor, do not lift the monitor by its base.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
English
External controls
Notice: Canadian users
CAN ICES-3(B)/NMB-3(B)
English
Disposal of waste equipment by user in private household in the European Union
This symbol on the product or on its packaging indicates that this product must not
be disposed of with your other household waste. Instead, it is your responsibility to
dispose of your waste equipment by handing it over to a designated collection point
for the recycling of waste electrical and electronic equipment. The separate collection
and recycling of your waste equipment at the time of disposal will help to conserve
natural resources and ensure that it is recycled in a manner that protects human
health and the environment. For more information about where you can drop off your
waste equipment for recycling, please contact your local city office, your household
waste disposal service or the shop where you purchased the product.
SPECIFICATION
LCD Panel
Driving system
Size
Pixel pitch
Brightness
Contrast
Viewable angle
Response time
Panel Type
Video
H-Frequency
V-Frequency
Display Colors
Dot Clock
Max. Resolution
Plug & Play
Energy Efficiency Class
*Annual Energy Consumption
ON Mode
Power consumption
Sleep Mode
@200cd/m2
Off Mode
Input Connector
Input Video Signal
Speakers
Maximum Screen Size
Audio
Power Source
Environmental
Considerations
Dimensions
Weight (N. W.)
TFT Color LCD
27"W (69cm)
0.3113mm(H) x 0.3113mm(V)
400cd/m2(Typical)
100,000,000:1Max. (ACM)
170° (H) 160° (V) (CR=10), 176° (H) 170° (V) (CR=5)
1ms (G to G)
TN
Digital Interface
HDMI:30-180KHz, DVI:30-180KHz, DP:180-180KHz
30-144Hz
16.7M Colors
330MHz
1920x1080@144Hz
VESA DDCCI/DDC2B
A
44 (kWh) (for HDMI-input Model)
21W(typ.)
0.23W(typ.)
0.14W(typ.)
DVI-DL (Only Dual-Input Model)
HDMI (Only HDMI Model)
DP (Only DP-Input Model)
Digital signal (Only Dual-Input Model)
DP signal (Only DP Model)
HDMI signal (Only HDMI-Input Model)
2W x 2(Only Audio-Input Model)
Horizontal:598mm
Vertical:336mm
Audio-Input (Only Audio-Input Model)
Audio-Output (Only Audio-Output Model)
100-240V~, 50/60Hz
Operating Temp: 5° to 35°C
Storage Temp: -20° to 60°C
Operating Humidity: 10% to 85%
614 (W) x 465 (H) x 232 (D)mm
5.79kg Unit (net)
Mechanism spec
Switch / Buttons
External
Controls:
Functions
Power Button
Input switch
Volume
Brightness
Modes
Main Menu OSD
Page Right/Left
Brightness
Volume
Contrast
Over Drive
Black Boost
Aim Point
Blue Light
Language
ACM
OSD Timeout
Super Sharpness
Transparency
Auto Config (only Analog input
model)
Refresh Rate Num
H. Position(only Analog input
model)
Input
V. Position (only Analog input
model)
Auto Source
Focus (only Analog input model)
Wide Mode
Clock (only Analog input model)
Hot Key Assignment
Gamma
DDC/CI
Color Temp
HDMI Black Level
sRGB mode
Quick Start Mode
6-axis Hue
Reset
6-axis Saturate
MPRT
* All specifications are subject to change without notice.
Find manuals and other documents for your Acer product on the official Acer support website.
*Annual energy consumption is calculated using the typical power consumption 4 hours per day, 365 days per year.
Bahasa
English
Indonesia
Tilt: -5° to +15°
Swivel: No
Height adjustment: No
Pivot: No
Detachable foot stand: Yes
Download PDF