Philips | DVDR3380/05 | Philips DVD player/recorder DVDR3380/05 Quick start guide

Philips DVD player/recorder DVDR3380/05 Quick start guide
3
DVD Player/ Recorder
Enjoy
Start playback
A Press OPEN/CLOSE
on the front of
the recorder, load in a disc and close the disc
tray.
B Press DISC MENU
and use up
keys to select a title.
down
C Press PLAY
to start playback.
Recording from the TV or an external
device (continued)
C Press REC MODE
recording mode.
repeatedly to select the
DVDR3380
Quick Start Guide
or
D To stop playback, press STOP
.
Record Quality
Hours of Recording that can be stored
4.7 GB DVD±R/±RW disc
High Quality HQ
Standard Play SP
Extended Play EP
Super Long Play SLP
1
2
4
6
Types of discs for recording
Start Recording
Recording from the TV or
an external device
A Insert a recordable DVD disc in the
tray.
B Press REC SOURCE
repeatedly to select
the source to record from. (eg, TUNER, CAM1,
DV, EXT1 or EXT2).
1
2
3
E Press REC
to start recording, press REC
again to automatically record 30 minutes.
. ‘UPDATE’
F To end recording, press STOP
will be displayed on the recorder.
G To playback the recording, press DISC MENU
, select the title and press PLAY
.
To record a TV programme, use up
or
keys to scroll through the channels,
down
or press 0
-9
to select the channel that
you want to record.
Connect
Set up
Enjoy
What’s in the box?
DVD Player/ Recorder
Need help?
User
Manual
User Manual
See the user manual that came with your Philips recorder.
Remote Control
and 2 batteries
Online
Go to www.philips.com/support.
2006 © Koninklijke Philips N.V.
All rights reserved.
12 NC 3139 245 21191
www.philips.com
RF Coaxial Cable
SCART Cable
1
Connect
2
Start with the ‘Basic Connection.’
If you have a VCR, follow the instructions for ‘Connection with a VCR or similar device’.
Basic Connection
Television (rear)
Connection with a VCR or
similar device
Set up
A Finding the viewing channel
To antenna or
set-top box
SCART IN
Television (rear)
Philips recorder
(rear)
EXT 2
TV-OUT
AUX - I/O
System Menu - General
A Press STANDBY-ON on the recorder.
B Switch on the TV set.
B Connecting
EXT 1
To AC
power
To antenna or
set-top box
TO TV - I/O
ANTENNA-IN
~
MAINS
VCR or similar
device (rear)
B Connect the antenna cable to the ANTENNAIN
jack on the recorder.
C Use the supplied RF coaxial cable to connect the
TV-OUT
jack on this recorder to the
Antenna In jack on the TV.
D Use the SCART cable to connect the EXT1 TO
TV-I/O socket on this recorder to the
corresponding SCART input socket on the TV.
E Connect the power cable from the recorder to
an AC power outlet.
On
Country
Germany
Video Output Format
PAL
Restore Factory Settings OK
Note Use up
or down
keys to toggle through
. To
the options. Select an item by pressing right
confirm a setting, press OK .
B Select the country of your residence.
Highlight
and press right
.
Select { Country } and press right
to
to confirm
access the options. Press OK
your selection.
Highlight
EXT 2
TV-OUT
Screen Saver
C Select the OSD language.
To
AC power
A Before connecting, unplug the antenna cable that
is currently connected to your TV.
Note If connected to your VCR, make sure it
is switched off or in standby mode before
proceeding.
C In case you do not see the recorder’s blue
wallpaper, press “0” and the Channel Down
button on the TV’s remote control repeatedly
(or AV, SELECT, ° button) until you see this
screen. This is the correct viewing channel for
the recorder.
SCART IN
on the remote
control.
Philips recorder (front panel)
Your new Philips recorder replaces the VCR for your
recording needs. First, unplug all the connections
from your VCR.
Initial Installation
A Press SYSTEM MENU
STANDBY-ON
A Before Connecting
B
AUX - I/O
EXT 1
TO TV - I/O
ANTENNA-IN
~
MAINS
Philips
recorder
(rear)
A Follow the steps under ‘Basic Connections’
before you proceed to step B below.
B Use another SCART cable (not supplied) to
connect the EXT2 AUX-I/O SCART socket
on this recorder to the SCART OUT socket on
the VCR.
C Connect the power cable from your VCR to an
AC power outlet.
Note In this setup, the VCR cannot record TV
programmes.
For additional connection diagrams, see
the accompanying User Manual.
and press right
.
Select { On-Screen Display Language } and
press right
to access the options. Press
OK
to confirm your selection.
D Setup and install TV channels.
Highlight
and press right
.
Select { Channel Search } and press OK
on the remote control to start automatic TV
channel search.
E Setting the date and time.
Highlight
and press right
.
Select { Date (dd/mm/yy) } or { Time
(hh/mm/ss) } and press OK .
Use the numeric keypad 0
-9
input the date/time, then press OK
confirm.
to
to
Note The settings will be updated according to the
broadcast channel information of preset Programme
Number 1.
F Press SYSTEM MENU
to exit.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising