Philips MCD289/12 User manual

Philips MCD289/12 User manual
Micro System
Register your product and get support at
MCD289
EN User manual
FR Mode d’emploi
DA Brugervejledning
IT
DE Benutzerhandbuch
NL Gebruiksaanwijzing
ES Manual de usuario
SV Användarhandbok
Manuale utente
Engl i sh
Contents
1 Important
2
6 Adjust settings
20
Safety
Notice
2
3
General setup
Audio setup
Video setup
Preference setup
20
20
21
21
2 Your DVD Micro Theater
Introduction
What’s in the box
Overview of the main unit
Overview of the remote control
3 Connect
Before you connect
Connect speakers
Connect TV
Connect audio cable
Connect FM antenna
Place the unit
Connect power
4 Get started
Prepare the remote control
Set the clock
Turn on
Find the correct viewing channel
Select the correct TV system
Change system menu language
Turn on Progressive Scan
Turn off progressive scan manually
5 Play
Play discs
Play from USB
Play DivX video
Play MP3/WMA/picture files
Play control
Play options
Picture view options
5
5
5
6
7
10
10
10
10
11
11
11
12
13
13
13
13
14
14
15
15
15
16
16
16
17
17
17
18
19
7 Tune to FM radio stations
23
Program radio stations automatically
Program radio stations manually
Tune to a preset radio station
Set RDS clock
Show RDS information
23
23
23
23
24
8 Adjust volume level and sound effect 25
Adjust volume level
Select a sound effect
Mute sound
Listen through headphone
25
25
25
25
9 Other features
26
Adjust brightness of display panel
Set the alarm timer
Set the sleep timer
Connect other devices
26
26
26
26
10 Product information
27
Specifications
Supported disc formats
USB playability information
Maintenance
RDS program types
27
28
28
29
29
11 Troubleshooting
30
EN
1
1 Important
Safety
Important Safety Instructions
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
g Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
h Do not install near any heat sources
such as radiators, heat registers, stoves,
or other apparatus (including amplifiers)
that produce heat.
i Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.
j Only use attachments/accessories
specified by the manufacturer.
k Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.
m Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
n Battery usage CAUTION – To prevent
battery leakage which may result in
bodily injury, property damage, or
damage to the unit:
• Install all batteries correctly, + and as marked on the unit.
• Do not mix batteries (old and new
or carbon and alkaline, etc.).
• Remove batteries when the unit is
not used for a long time.
o Apparatus shall not be exposed to
dripping or splashing.
p Do not place any sources of danger on
the apparatus (e.g. liquid filled objects,
lighted candles).
q This product may contain lead and
mercury. Disposal of these materials
may be regulated due to environmental
considerations. For disposal or recycling
information, please contact your local
authorities or the Electronic Industries
Alliance: www.eiae.org.
r Where the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain
readily operable.
Warning
• Never remove the casing of this apparatus.
• Never lubricate any part of this apparatus.
• Never place this apparatus on other electrical
equipment.
• Keep this apparatus away from direct sunlight, naked
flames or heat.
l Unplug this apparatus during lightning storms
or when unused for long periods of time.
2
EN
• Never look into the laser beam inside this apparatus.
• Ensure that you always have easy access to the power
cord, plug or adaptor to disconnect this apparatus
from the power.
Listen at a moderate volume.
• Using headphones at a high volume can
impair your hearing. This product can
produce sounds in decibel ranges that
may cause hearing loss for a normal
person, even for exposure less than a
minute. The higher decibel ranges are
offered for those that may have already
experienced some hearing loss.
• Sound can be deceiving. Over time your
hearing ‘comfort level’ adapts to higher
volumes of sound. So after prolonged
listening, what sounds ‘normal’ can
actually be loud and harmful to your
hearing. To guard against this, set your
volume to a safe level before your hearing
adapts and leave it there.
To establish a safe volume level:
• Set your volume control at a low setting.
• Slowly increase the sound until you can
hear it comfortably and clearly, without
distortion.
Listen for reasonable periods of time:
• Prolonged exposure to sound, even
at normally ‘safe’ levels, can also cause
hearing loss.
• Be sure to use your equipment
reasonably and take appropriate breaks.
Be sure to observe the following guidelines
when using your headphones.
• Listen at reasonable volumes for
reasonable periods of time.
• Be careful not to adjust the volume as
your hearing adapts.
• Do not turn up the volume so high that
you can’t hear what’s around you.
• You should use caution or temporarily
discontinue use in potentially hazardous
situations. Do not use headphones while
operating a motorized vehicle, cycling,
skateboarding, etc.; it may create a traffic
hazard and is illegal in many areas.
Notice
Engl i sh
Hearing safety
This product complies with the radio
interference requirements of the European
Community.
This product complies with the requirements
of the following directives and guidelines:
2004/108/EC + 2006/95/EC
Recycling
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When you see the crossed-out wheel bin
symbol attached to a product, it means the
product is covered by the European Directive
2002/96/EC:
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products. The correct
disposal of your old product helps prevent
potentially negative consequences on the
environment and human health.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed of with normal household
waste.
When you see the crossed-out wheel bin
symbol with the chemical symbol ‘Pb’, it
means that the batteries comply with the
requirement set by the directive for lead:
EN
3
Please inform yourself about the local rules on
separate collection of batteries. The correct
disposal of batteries helps prevent potentially
negative consequences on the environment
and human health.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and
old equipment.
DivX, DivX Certified, and associated logos are
trademarks of DivX, Inc. and are used under
license.
Windows Media and the Windows logo are
trademarks, or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
The USB-IF Logos are trademarks of Universal
Serial Bus Implementers Forum, inc.
The making of unauthorized copies of
copy-protected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
Manufactured under license from Dolby
Laboratories.
Dolby, Pro Logic and the double-D symbol are
trademarks of Dolby Laboratories.
This product incorporates copyright
protection technology that is protected
by method claims of certain U.S. patents
and other intellectual property rights
owned by Macrovision Corporation and
other rights owners. Use of this copyright
protection technology must be authorized
by Macrovision Corporation, and is intended
for home and other limited viewing uses only
unless otherwise authorized by Macrovision
Corporation. Reverse engineering or
disassembly is prohibited.
4
EN
Note
• The type plate is located at the rear of the apparatus.
This apparatus includes this label:
Norge
Typeskilt finnes på apparatens underside.
Observer: Nettbryteren er sekundert
innkoplet. Den innebygde netdelen er
derfor ikke frakoplet nettet så lenge
apparatet er tilsluttet nettkontakten.
For å redusere faren for brann eller
elektrisk støt, skal apparatet ikke utsettes
for regn eller fuktighet.
You can play DVD discs with the following
region codes:
DVD region code
Engl i sh
2 Your DVD
Micro Theater
Countries
Europe
Congratulations on your purchase, and
welcome to Philips. To fully benefit from the
support that Philips offers, register your product
at www.Philips.com/welcome.
What’s in the box
Introduction
With this unit, you can:
• watch video from DVD/VCD/SVCD discs
• enjoy audio from DVD/VCD/CD/MPs/
WMA discs or USB devices
You can enrich sound output with these sound
effects:
• Digital Sound Control (DSC)
• Dynamic Bass Boost (DBB)
• LOUDNESS
The unit supports these media/disc formats:
Check and identify the contents of your
package:
• A/V cord (R/W/Y)
• FM wire antenna
• 1 X certified power adapter
(Brand name: PHILIPS,
Model No.: GFP451DA-2419-1
Input: 100-240V ~ 50/60Hz 1.2A
Output: 24V 1.9A)
• Stand
• Remote Control and two AAA batteries
• This instruction booklet and a quick start
guide
EN
5
Overview of the main unit
a
STANDBY-ON/ECO POWER
• Turn on the apparatus, switch
to standby mode, or Eco Power
standby mode.
b Display screen
• Display current status of the system.
c PROGRAM
• For DVD/VCD/CD/MP3-CD/USB:
enter the program menu.
6
EN
•
•
For picture CD: during playback,
select a slide show mode.
For tuner: program preset radio stations.
d
•
•
In DISC/USB mode, stop the play or
clear a program.
For Demo (on the unit
only), activate/deactivate the
demonstration.
•
In DISC/USB mode, start or
interrupt the play.
Overview of the remote
control
Engl i sh
e
f SOURCE
• Select the respective sound source:
TUNER, DISC, USB or AUX.
g TUNING /
• Search within a track or disc.
• Tune to a radio station.
h PRESET /
• Skip to the previous/next chapter/
title/track.
• Select a preset radio station.
i AUX-IN
• Connect an external non-USB device.
j
•
Connect a headphone.
k SLIDE OPEN
• Slide down to expose some buttons
and jacks on the front panel.
l
•
USB socket.
m VOLUME -/+
• Adjust the volume upward/
downward.
• Adjust the hours and minutes in
clock/timer setting mode.
• Select a source in timer setting mode.
n IR Sensor
• Infrared sensor for remote control.
o EJECT
• Eject a disc from the disc loader.
EN
7
a STANDBY-ON
• Switch the system on or to Eco
power/normal standby mode.
b SOURCE
• Select the respective sound source:
DISC, TUNER, USB or AUX.
c A-B
• For VCD/CD/USB: repeat a specific
section within the same track.
• For DVD: repeat a specific section
in a disc.
d MODE
• Select various repeat modes or the
shuffle play mode for a disc.
e SYSTEM MENU
• Enter or exit the system menu bar.
f
/
•
g
In DISC mode, to select a movement
direction in the disc menu or system
menu bar.
/
•
For tuner:
Press to tune to a lower/higher radio
frequency gradually.
Press and hold, then release the key
to start automatic search for a radio
frequency downward/upward.
For disc/USB:
Search fast backward/forward.
In DISC mode, to select a movement
direction in the disc menu or system
menu bar.
•
h ZOOM
• For DVD/VCD/Picture CD: enlarge
or reduce a picture or active image
on the TV screen.
i DISPLAY
• Display information on TV screen
during the play.
j
/
•
8
EN
For disc: skip to the previous/next
chapter/title/track.
•
For tuner: select a preset radio
station.
k MUTE
• Interrupt or resume sound
reproduction.
l
•
In DISC/USB mode, start or
interrupt the play.
m LOUDNESS
• Enable or disable automatic loudness
adjustment.
n DSC
• Select different types of preset
sound equalizer settings (CLASSIC,
JAZZ, ROCK, POP or FLAT; for
DVD: NORMAL, CONCERT,
DRAMA, ACTION or SCI-FI).
o Numeric keypad
• Input a track/title/chapter number of
the disc.
p PROGRAM
• For DVD/VCD/CD/MP3-CD/USB:
enter the program menu.
• For picture CD: during the play,
select a slide show mode.
• For tuner: program preset radio
stations.
q GOTO
• In DISC mode, fast search in a disc
byentering a time, title, chapter or track.
r RDS
• For tuner: display RDS information.
s AUDIO
• For VCD: set Stereo, Mono-Left or
Mono-Right sound mode.
• For DVD: select an audio language.
t SUBTITLE
• Select a subtitle language.
u SLEEP/TIMER
• In standby mode, set time
for switching on the system
automatically.
In power-on mode, set the sleep
timer function (auto off).
Engl i sh
•
v DBB
• Enable or disable bass enhancement.
w CLOCK
• In standby mode, set the system clock.
• In playback mode, display the system
clock.
x
•
In DISC/USB mode, stop the play or
clear a program.
y + VOL • Adjust the volume upward/
downward.
• Adjust the hours and minutes in
clock/timer setting mode.
• Select a source in timer setting mode.
z ANGLE
• Select a DVD camera angle.
{ OK
• Exit or confirm the selection.
| DISC MENU
• For DVD/VCD: enter or exit the disc
contents menu.
• For VCD2.0: switch the playback
control mode on or off .
} SLOW
• Select different slow play modes for
a VCD/SVCD/DVD.
~ DIM
• Select different levels of brightness
for the display screen.
5
•
Eject a disc from the disc loader.
EN
9
3 Connect
1
Place a soft cloth on a hard, flat, stable
surface.
You can select the best video connection that
your TV supports.
• Option 1: connect through A/V OUT.
• Option 2: connect through S-Video
(for a standard TV).
• Option 3: connect through
component video (for a standard TV
or Progressive Scan TV).
2
With its front panel face-down, place the
unit onto the cloth.
Connect through AV OUT
Before you connect
3
Remove the detachable cover on the
back of the set.
AUDIO
IN
S-VIDEO
IN
TV IN
VIDEO IN
AUDIO
IN
S-VIDEO
IN
TV IN
VIDEO IN
Connect speakers
1
Connect the two front speaker cables to
the SPEAKERS terminals: right speaker to
“RIGHT” and left speaker to “LEFT”.
Note
• Ensure that the speaker cables are correctly
•
•
•
connected. Improper connections may damage the
system due to short-circuit.
For optimal sound performance, use the supplied
speakers.
Do not connect more than one speaker to any one
pair of +/- speaker terminals.
Do not connect speakers with an impedance lower
than the speakers supplied. Please refer to the
SPECIFICATIONS section of this manual.
Connect TV
Connect video cables
With this connection, you can watch video
from the unit on the TV screen.
10
EN
1
Connect the supplied AV cord to:
• the AV OUT socket on this unit.
• the video input jack (or labeled
as A/V In, CVBS, Composite or
Baseband) on the TV.
Connect through S-Video
1
R
To hear the sound of this DVD system
through your TV, connect the audio
connectors (white/red) to the audio input
jacks on the TV.
Connect FM antenna
1
Connect an S-video cable (not supplied) to:
• the S-Video socket on this unit.
• the S-Video input socket (or labeled
as Y/C or S-VHS) on the TV.
1
Connect the supplied FM antenna to the
FM AERIAL socket on the unit.
Connect through component video
Connect a progressive scan TV through
component video for higher quality video.
COMPONENT
Red
1
Blue
Green
Place the unit
1
After finishing all rear connections, mount
the detachable cover on the back of the
set until hearing a click to avoid cable
clutter.
Connect the supplied AV cord (red/
white/yellow) to:
• the Component socket on this unit.
• the component input sockets (or labeled
as Y Pb/Cb Pr/Cr or YUV) on the TV:
yellow connector to the red socket, red
connector to the blue socket, white
connector to the green socket.
EN
11
Engl i sh
Connect audio cable
2
Align the side marked PRESS of the stand
to the slots at the bottom of the set.
3
Push the stand down into the slots until
you hear a click.
4
Place the set upright on the desktop with
the support of the stand.
5
Extend the bracket on the back of each
front speaker as shown so that the front
speakers can stand firmly on the desktop.
6
Place the subwoofer on the floor near an
AC outlet.
Note
• To remove the stand from the set, while pressing
down PRESS , pull the stand out from the slots.
Connect power
Caution
• Risk of product damage! Ensure that the power supply
•
•
12
voltage corresponds to the voltage printed on the back
or the underside of the unit.
Risk of electric shock! When you unplug the AC
power, always pull the plug from the socket. Never pull
the cord.
Before you connect the AC power, ensure you have
completed all other connections.
EN
1
Connect the power plug of the main unit
to the wall outlet.
2
Connect the power plug of the digital
wireless subwoofer to the wall outlet.
Caution
2
Press VOLUME -/+ (+ VOL - on the
remote control) to set the hour.
3
Press CLOCK again.
» The minute digits are displayed and
begin to blink.
4
Press VOLUME -/+ (+ VOL - on the
remote control) to set the minute.
5
Press CLOCK to confirm.
• Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Note
• This system only supports 24-hour mode.
• The clock setting will be erased when the system is
disconnected from the power supply.
• The system will exit clock setting mode if no button is
pressed within 30 seconds.
Prepare the remote control
Turn on
Caution
• Risk of explosion! Keep batteries away from heat,
1
sunshine or fire. Never discard batteries in fire.
1
2
Open the battery compartment.
3
Close the battery compartment.
Insert two AAA batteries with correct
polarity (+/-) as indicated.
Note
• Before you press any function button on the remote
•
control, first select the correct source with the remote
control instead of the main unit.
If you are not going to use the remote control for a
long time, remove the battery.
Set the clock
1
In the standby mode, press and hold
CLOCK on the remote control to
activate the clock setting mode.
» [CLOCK SET] is displayed briefly.
Press STANDBY-ON/ECO POWER
(STANDBY-ON on the remote
control).
» [HELLO] is displayed briefly.
» The unit switches to the last selected
source.
2
Wait for automatic setup of wireless
connection between the main unit and
subwoofer.
» [PAIRING] flashes.
» If the connection succeeds, [PAIR
OK] is displayed and both the blue
and green LED indicators on the
subwoofer light up.
» If the connection fails, [PAIR FAIL] is
displayed and only the blue indicator
on the subwoofer lights up.
» If the wireless connection fails, set up
the connection manually.
In case the wireless connection fails, you can:
EN
13
Engl i sh
» The hour digits are displayed and begin
to blink.
4 Get started
1
2
In active, standby or Eco Power Standby
mode, press and hold
on the unit for
three seconds.
» [PAIRING] flashes on the display
screen.
Press and hold the PAIR button on the
rear of the subwoofer for three seconds.
» If the connection succeeds, [PAIR
OK] is displayed and both the blue
and green LED indicators on the
subwoofer turn on.
Find the correct viewing
channel
1
2
3
» If the connection fails or the
connection cannot be set up
successfully within 60 seconds, [PAIR
FAIL] and only the blue LED indicator
on the subwoofer turns on.
Note
Press
to turn on the unit.
Press DISC to switch to disc mode.
Turn on the TV and switch to the correct
video-in channel in one of the following
ways:
• Go to the lowest channel on your
TV, then press the Channel Down
button until you see the Philips
screen.
• Press the source button repeatedly
on the remote control of your TV.
Tip
• The video-in channel is between the lowest and
highest channels and may be called FRONT, A/V IN,
VIDEO, HDMI etc. See the TV user manual on how to
select the correct input on the TV.
• If the wireless connection fails again, check whether
there is any conflict or strong interference (for
example, interference from other electronic devices)
around your location. After removal of the conflict or
strong interference, repeat the above procedures.
Select the correct TV system
Switch to standby mode
1
2
3
In the active mode, press STANDBYON/ECO POWER to switch the unit to
normal standby mode.
» The clock appears on the display panel.
In the normal standby mode, press
STANDBY-ON/ECO POWER for 3
seconds or more to switch the unit to
Eco Power Standby mode.
» The ECO POWER LED is on.
In the Eco Power Standby mode, press
STANDBY-ON/ECO POWER for 3
seconds or more to switch the unit to
normal standard mode.
Note
• If you do not press any button within 15 minutes after
a disc stops displaying, the unit switches to Standby
mode automatically.
14
EN
Change this setting if the video does not appear
correctly. By default, this setting matches the
most common setting for TVs in your country.
1
2
3
4
5
Press SYSTEM MENU.
Select [Preference Page].
Select [TV Type] and then press
.
Select a setting and then press OK .
• [PAL] - For TV with PAL color
system.
• [Multi] - For TV that is compatible
with both PAL and NTSC.
• [NTSC] - For TV with NTSC color
system.
To exit the menu, press SYSTEM MENU.
Note
• When the HDMI cable is connected, the [TV Type]
option is unavailable.
7
Press / to highlight [OK] in the menu
and press OK to confirm.
» A distorted picture appears on the TV.
1
2
8
Turn on your TV progressive scan mode
(refer to your TV user manual).
» The below menu appears on the TV.
9
Press / to highlight [OK] in the menu
and press OK to confirm.
» The progressive setup is complete.
Press SYSTEM MENU.
Select [General Setup Page] or
[Preference Page].
3
Select [OSD LANGUAGE] and then
press .
4
5
Select a setting and then press OK .
To exit the menu, press SYSTEM MENU.
Turn on Progressive Scan
Progressive scan displays twice the number of
frames per seconds than interlaced scanning
(ordinary TV system). With nearly double the
number of lines, progressive scan offers higher
picture resolution and quality.
Before you turn on this feature, ensure that:
• The TV supports progressive scan
signals.
• You have connected this unit with
the TV through component video.
1
2
Turn on the TV.
Ensure that the TV progressive scan
mode is deactivated (see the TV user
manual).
3
Switch the TV to the correct viewing
channel for this unit.
4
5
Press SYSTEM MENU on the remote.
6
Press / to select [Video Setup Page] in
the menu.
Select [TV Mode] > [P - SCAN], then
press OK .
» The instruction menu appears on the
TV.
Turn off progressive scan
manually
1
Turn off the progressive scan mode on
the TV.
2
3
Press SYSTEM MENU to exit the menu.
Press DISC followed by numeric key “1”
to turn off the progressive scan mode on
the unit.
» The blue Philips DVD background
screen is displayed.
Note
• In the progressive mode, if you press DISC followed
by numeric key “1” during normal play, the progressive
scan mode will be turned off on the unit.
EN
15
Engl i sh
Change system menu
language
5 Play
Note
For VCD with PlayBack Control (PBC)
feature (version 2.0 only):
With the PBC feature, you can play VCD
interactively according to the menu screen.
1
• With some disc/file types, play may differ.
During play, press DISC MENU to
enable/disable PBC.
» When PBC is enabled, the menu
screen is displayed.
» When PBC is disabled, normal play is
resumed.
Play discs
Select an audio language
Caution
• Never look at the laser beam inside the unit.
• Risk of product damage! Never play discs with
•
1
2
3
accessories such as disc stabilizer rings or disc
treatment sheets.
Never put any objects other than discs into the disc
compartment.
Press DISC to select the DISC source.
Insert a disc into the disc compartment
and press OK .
» Ensure that the label faces outwards.
Play starts automatically.
• To stop play, press .
• To pause or resume play, press OK .
• To skip to the previous/next title/
chapter/track, press / .
If play does not start automatically:
• Select a title/chapter/track and then
press OK .
Tip
• To play a locked DVD, enter the 4-digit parental
control password.
Use the disc menu
When you load a DVD/(S)VCD disc, a menu
may be displayed on the TV screen.
To access or exit the menu manually:
1
Press DISC MENU.
16
EN
You can select an audio language on DVDs,
DiVx video or VCDs.
1
During disc play, press AUDIO.
» The language options appear. If the
selected audio channels is unavailable,
the default disc audio channel is used.
Note
• For some DVDs, the language can only be changed
from the disc menu. Press SYSTEM MENU to access
the menu.
Select a subtitle language
You can select a subtitle language on DVDs or
DivX® Ultra discs.
• During play, press SUBTITLE .
Tip
• For some DVDs, the language can only be changed
from the disc menu. Press SYSTEM MENU to access
the menu.
Play from USB
Note
• Ensure that the USB device contains playable music,
pictures or video.
3
4
5
socket.
3
Press SOURCE (or USB on the remote
control) to select the USB source.
Press DISC MENU until the folder is
displayed.
4
Press / to select a folder, then press
OK to confirm.
5
6
Press / to select a file from the folder.
Insert the USB plug into the
Press / to select a folder, then press
OK to confirm.
Press / to select a file from the folder.
Press OK to start play.
• To stop play, press .
• To pause or resume play, press OK .
• To skip to the previous/next file,
press / .
Play DivX video
Engl i sh
1
2
Press OK to start play.
• To stop play, press .
• To pause or resume play, press OK .
• To skip to the previous/next file,
press / .
Play control
Select repeat/shuffle play options
You can play DivX files copied onto a CD-R/
RW.
1
2
Insert a disc.
Press
to start the playback.
• To stop play, press .
• To pause or resume play, press
• To change a subtitle language, press
SUBTITLE .
Note
• You can only play DivX videos rented or purchased
•
•
1
through the DivX registration code of this unit.
Subtitle files with the following filename extensions
(.srt, .smi, .sub, .ssa, .ass) are supported but do not
appear on the file navigation menu.
The subtitle filename has to be the same as the file
name of the video.
During play, press MODE repeatedly to
select a repeat option or the shuffle play
mode.
• To resume normal play, press
MODE repeatedly until no option is
displayed.
Repeat A-B (DVD/VCD/CD/MP3/
WMA)
1
During music or video play, press A-B at
the start point.
2
Press A-B at the end point.
» The selected section starts to play
repeatedly.
•
To cancel repeat play, press A-B
again.
Note
Play MP3/WMA/picture files
• The section A and B can be set only within the same
track/title.
You can play MP3/WMA/picture files copied
onto a CD-R/RW, recordable DVD or USB
device.
1
2
Insert a disc or connect a USB device.
Search forward/backward
Select a source:
• For discs, press DISC .
• For USB devices, press USB
repeatedly.
1
During play, press TUNING /
repeatedly to select a search speed.
• To resume play at normal speed,
press OK .
EN
17
Search by time or chapter/track
number
2
Enter the tracks/chapters to add to the
program.
1
3
Repeat step 2 until the program is
complete.
During video/audio play, press GOTO
until a time field or chapter/track field is
displayed.
• For the time field, enter the play
position in hours, minutes and
seconds.
• For the chapter/track field, enter the
chapter/track.
• Play starts automatically at your
selected point.
Resume video play from last stopped
point
Note
• This feature is only available for DVD/VCD play.
4
Select [Start], then press OK to play the
program.
For Divx/MP3/WMA files:
1
During play or in stop mode, press DISC
MENU until the file list is displayed.
2
Select a file, then press PROGRAM to
add the file to the program list.
3
Repeat steps 2 until the program is
complete.
4
Press OK to play the program.
To delete a file from the [Program List]:
1
Press DISC MENU until the program list
is displayed.
2
Select a file, then press PROGRAM to
delete the file from the program list.
1
In stop mode and when the disc has not
been removed, press OK .
To cancel resume mode and stop play
completely:
1
In stop mode, press
Zoom in/out image
1
.
Play options
Display play information
1
During play, press DISPLAY repeatedly to
display play information.
Program
Note
• You cannot program picture files/discs.
During video/picture play, press ZOOM
repeatedly to zoom in/out the image.
• When the image is zoomed in, you
can press / / / to pan through
the image.
Slow-motion play
1
During video play, press SLOW
repeatedly to select a slow play option.
» The sound is muted.
» To resume play at normal speed, press
.
Change the audio channel
Note
For video discs/audio CDs:
1
During play or in stop mode, press
PROGRAM to access the program menu.
18
EN
• This feature is only available for VCD/DivX play.
During play, press AUDIO repeatedly to
select an audio channel available on the disc:
• Mono Left
• Mono Right
• Stereo
Engl i sh
1
Select a camera angle
Note
• This feature is only available for DVDs recorded with
multiple camera angles.
1
During play, press ANGLE repeatedly to
select a camera angle.
Picture view options
Preview pictures
1
During play, press .
» The thumbnails of 12 pictures are
displayed.
2
Select one of the following:
• a picture
• the slide show option
• the [Menu] option
• the next/previous page (if available)
3
Press OK to:
• play the selected picture
• start slide show of all pictures
• enter the remote key function menu
• turn to the next/previous page (if
available)
Select a slide show play mode
1
During play, press PROGRAM repeatedly
to select a slide-show play mode.
Rotate picture
1
During play, press / / / to rotate the
picture anti-clockwise/clockwise.
EN
19
6 Adjust settings
1
2
3
4
Press SYSTEM MENU.
Select a setup page and then press .
Select an option and then press .
Select a setting and then press OK .
• To return to the previous menu,
press .
• To exit the menu, press SYSTEM
MENU.
General setup
•
•
•
4:3 Letter Box (LB)
[On] – Enable the screen saver.
[Off] – Disable the screen saver.
[DIVX (R) VOD]
Display the DivX® registration code.
Tip
• Enter this DivX registration code when you rent or
purchase video from http://vod.divx.com/. The DivX
videos rented or purchased through the DivX® VOD
(Video On Demand) service can be played only on the
device to which it is registered.
Audio setup
On [General Setup Page], you can set the
following options:
[TV Display]
The TV format determines the aspect ratio of
display according to the type of TV you have
connected.
4:3 Pan Scan (PS)
•
•
16:9 (Wide Screen)
[4:3 Pan Scan] – For 4:3 screen TV:
full-height display with the trimmed
sides.
[4:3 Letter Box] – For 4:3 screen TV:
wide-screen display with black bars
on the top and bottom of the screen.
[16:9] – For wide-screen TV: display
ratio 16:9.
[OSD Language]
Select the preferred language for on-screen
display.
[Screen Saver]
The screen saver protects the TV screen
damage due to prolonged exposure to a static
image.
On [Audio Setup Page], you can set the
following options:
[Analog Audio Setup]
• [LT/RT] – Select the mixed sound
output mode.
• [Stereo] – Select the ordinary stereo
sound output.
[Digital Audio Setup]
Select audio formats supported by the
connected device.
• [Off] – Turn off the digital output.
• [SPDIF/RAW] – If the connected
device supports multi-channel audio
formats, select this option.
• [PCM Only] – If the connected
device cannot decode multichannel
audio, select this option.
[Dolby Digital Setup]
Select audio signals output to speakers.
• [Stereo] – Output multichannel
sound signals to both speakers.
• [L - Mono] – Output left mono
sound signals to both speakers.
• [R - Mono] – Output right mono
sound signals to both speakers.
[3D]
Select a virtual surround sound mode from
the following modes:
Video setup
On [Video Setup Page], you can set the
following options:
[Component]
Set the video output according to the video
connection. If the composite connection is
used, this setting is not required.
• [S - Video] – If the S-Video
connection is used, select this option.
• [Pr/Cr Pb/Cb Y] – If the component
connection is used, select this option.
[TV Mode]
Select the video output mode. To select the
progressive scan mode, ensure that you have
connected a progressive scan TV and set
[Component] to [Pr/Cr Pb/Cb Y].
• [PROGRESSIVE] – For progressive
scan TV: turn on the progressive
scan mode.
•
[Interlace] – For ordinary TV: turn
on the interlace mode.
[Picture Setting]
Customize picture color settings.
Engl i sh
• [Off]
• [Concert]
• [Living Room]
• [Hall]
• [Bathroom]
• [Cave]
• [Arena]
• [Church]
[HDCD]
When you play a HDCD (High Definition
Compatible Digital) disc, select the audio
output cutoff frequency.
You can select from the following options:
• [Off]
• [44.1K]
• [88.2K]
[Night Mode]
Make loud sound level softer and soft sound
level louder so that you can watch the DVD
movies at a low volume, without disturbing
others.
• [On] – enjoy quiet viewing at night
(DVDs only).
• [Off] – enjoy surround sound with
its full dynamic range.
Preference setup
On [Preference Page], you can set the following
options:
[TV Type]
Change this setting if the video does not
appear correctly. By default, this setting
matches the most common setting for TVs in
your country.
• [PAL] - For TV with PAL color
system.
• [Multi] - For TV that is compatible
with both PAL and NTSC.
• [NTSC] - For TV with NTSC color
system.
[Audio]
Select the preferred audio language for disc play.
[Subtitle]
Select the preferred subtitle language for disc play.
[Disc Menu]
Select the preferred disc menu language.
Note
• If the language you have set is not available on the disc,
the disc uses its own default language.
• For some discs, the subtitle/audio language can only be
changed from the disc menu.
[Parental]
Restricts access to discs that are unsuitable
for children. These types of discs must be
recorded with ratings.
1
2
3
4
Press / to highlighten [RATING].
Press
to enter the submenu.
Select a rating level, then press OK .
Press the numeric keys to enter the
password.
EN
21
Note
• Rated discs above the level you set in [Parental]
require a password to be played.
• The ratings are country-dependent. To allow all discs
to play, select [8 ADULT].
• Some discs have ratings printed on them but are not
recorded with ratings. This function has no effect on
such discs.
Tip
• You can set or change the password.
[Default]
Resets all the settings of this unit to factory
default, except for the password and parental
settings.
[Password Mode]
This setting allows you to enable/disable the
password for parental control. If the password
is enabled, when you play a prohibited disc,
this 4-digit password is required.
• [On] - Enable the password for
parental control.
• [Off] - Disable the password for
parental control.
•
[Password]
You can change password here. The
default password is 1234.
Note
• if you forget the password, enter “1234” before you
set a new password.
22
EN
Program radio stations
manually
Engl i sh
7 Tune to FM
radio stations
Note
1
2
Ensure that you have connected and fully
extended the supplied FM antenna (see
‘Connect FM antenna’ on page 12).
Press SOURCE on the unit or TUNER
on the remote control repeatedly to
select FM tuner source.
3
Press and hold TUNING / on the
unit or ( / on the remote control).
4
When the frequency indication starts to
change, release the button.
» The FM tuner tunes to a station with
strong reception automatically.
5
Repeat steps 3-4 to tune to more
stations.
To tune to a weak station:
Press TUNING / repeatedly until you find
optimal reception.
Program radio stations
automatically
Note
• You can program a maximum of 20 preset radio
stations.
1
2
Tune to a radio station.
3
Press PRESET / to allocate a number
from 1 to 20 to this radio station.
4
Press PROGRAM to confirm.
» PROG disappears.
5
Repeat the above steps to program other
stations.
Press PROGRAM to activate
programming.
» PROG begins to blink.
Note
• To overwrite a programmed station, store another
station in its place.
Tune to a preset radio station
1
Press PRESET / to select a preset
number that you want.
• You can program a maximum of 20 preset radio
stations.
1
Press and hold PROGRAM for more
than 3 seconds to activate automatic
programming.
» [AUTO] is displayed.
» All available stations are programmed
in the order of waveband reception
strength.
Tip
• You can also use the numerical keypad to select a
preset station directly.
Set RDS clock
You can use time signal broadcast together
with the RDS signal to set the clock of the unit
automatically.
1
Tune to a RDS radio station that
transmits time signals.
EN
23
» The unit reads the RDS time and sets
the clock automatically.
Note
• The accuracy of the transmitted time depends on the
RDS station that transmits the time signal.
Show RDS information
RDS (Radio Data System) is a service
that allows FM stations to show additional
information. If you tune to a RDS station, a RDS
icon and the station name are displayed.
When automatic programming is used, RDS
stations are programmed first.
1
2
Tune to a RDS station.
Press RDS repeatedly to scroll through
the following information (if available):
» Station name
» Program type such as [NEWS],
[SPORT], [POP M]...
» RDS clock
» Frequency
Note
• See “Product information - RDS program types” for
definitions of RDS program types.
24
EN
Select automatic loudness control
Automatic loudness control increases the
treble and bass effect at low volume levels
(the higher the volume, the lower the treble
and bass levels).
1
Adjust volume level
1
During play, press + VOL - to increase/
decrease the volume level.
Select a sound effect
Note
Engl i sh
8 Adjust volume
level and sound
effect
To turn on automatic loudness control,
press LOUDNESS during play until the
loudness icon is displayed.
• To turn off automatic loudness
control, press LOUDNESS until the
loudness icon disappears.
Mute sound
1
During play, press MUTE to mute/unmute
sound.
• You cannot use different sound effects at the same
time.
Listen through headphone
Select a preset sound effect
1
During play, press DSC repeatedly to
select:
• [ROCK]
• [JAZZ]
• [POP]
• [CLASSIC]
• [FLAT]
For DVD:
• [NORMAL]
• [CONCERT]
• [DRAMA]
• [ACTION]
• [SCI-FI]
1
Plug a headphone into the
the unit.
socket on
Enhance bass
1
To turn on bass enhancement, press DBB
repeatedly during play until the DBB logo
is displayed.
• To turn off bass enhancement, press
DBB repeatedly until the DBB logo
disappears.
EN
25
9 Other features
Set the sleep timer
1
Adjust brightness of display
panel
1
In standby mode, press DIM repeatedly
to select different levels of brightness for
the display panel.
When the unit is turned on, press SLEEP/
TIMER repeatedly to select a set period
of time (in minutes).
» The unit turns off automatically after
the set period of time.
Connect other devices
Set the alarm timer
Listen to an audio player
1
Ensure that you have set the clock
correctly.
You can listen to audio player through this
unit.
2
In standby mode, press and hold SLEEP/
TIMER .
» [TIMER SET] is displayed briefly. The
hour digits begin to blink.
3
Press VOLUME -/+ (+ VOL - on the
remote control) to set the hour.
4
Press SLEEP/TIMER to confirm.
» The minute digits are displayed and
begin to blink.
5
Press VOLUME -/+ (+ VOL - on the
remote control) to set the minute.
6
Press SLEEP/TIMER to confirm.
» [TUN], [DVD] or [USB] begins to
blink.
7
Press VOLUME -/+ (+ VOL - on the
remote control) to select your desired
source.
8
Press SLEEP/TIMER to complete the
setting.
» A clock icon appears on the display.
» The unit turns on automatically at
the set time and switches to the last
selected source.
To deactivate the alarm timer
1
Press SLEEP/TIMER again.
» The clock icon disappears.
26
EN
1
Connect a 3.5mm audio cable to
• the AUX-IN jack on the unit
• the AUDIO OUT socket on the
audio player.
2
Start play on the audio player.
Tuner (FM)
Tuning Range
87.5 - 108MHz
Tuning grid
50KHz
Engl i sh
10 Product
information
Sensitivity
- Mono, 26dB S/N Ratio <5 uV
- Stereo, 46dB S/N Ratio >100 uV
Note
• Product information is subject to change without prior
notice.
Search Selectivity
>28dB
Image rejection
>25dB
Total Harmonic Distortion <3%
Signal to Noise Ratio
>50dBA
Specifications
Speakers
Amplifier
Rated Output Power 2 X 15W + 50W
RMS
Speaker Impedance
-- L/R speaker
-- Subwoofer
4 ohm
4 ohm
Frequency Response
-- L/R speaker
-- Subwoofer
Speaker Driver
-- L/R speaker
-- Subwoofer
3”
5”
Frequency Response
50 - 16000 Hz
180 - 20000 Hz
50 - 180 Hz
Signal to Noise Ratio > 65dB
Aux Input
1V RMS 20k ohm
Disc
Laser Type
Semiconductor
Disc Diameter
12cm/8cm
Video Decoding
MPEG-1 / MPEG-2 /
DivX
Video DAC
12Bits
Signal System
PAL / NTSC
Video Format
4:3 / 16:9
Video S/N
>48dB
Audio DAC
24Bits / 96kHz
Total Harmonic
Distortion
<0.1% (1 kHz)
Frequency
Response
4Hz - 20kHz (44.1kHz)
4Hz - 22kHz (48kHz)
4Hz - 24kHz (96kHz)
S/N Ratio
>65dBA
EN
27
General information
Total output power
2 x 25W + 50W
RMS
AC power
220 - 240V, 50Hz
Operation Power
Consumption
35W
Standby Power
Consumption
< 4W
Eco Standby Power
Consumption
1W
Composite Video Output 1.0Vp-p, 75ohm
S-Video Output
1.0Vp-p, 75ohm
Coaxial Output
0.5Vpp ± 0.1Vpp
75ohm
Headphone Output
2X15mW,
32ohm
USB Direct
Version 2.0
Wireless Subwoofer
Connection
2.4 GHz, AFH
Dimensions
- Main Unit (W x H x D) 200 x 250 x
110mm
140 x 220 x
- Main Speaker (W x H
33mm (each)
x D)
170 x 197 x
- Wireless Subwoofer
302mm
Box (W x H x D)
Weight
- With Packing
- Main Unit
- main Speaker
- Wireless Subwoofer
Box
8 kg
1.45 kg
0.4 kg (each)
3.3 kg
Supported disc formats
•
•
•
•
•
Digital Video Discs (DVDs)
Video CDs (VCDs)
Super Video CDs (SVCDs)
Digital Video Discs + Rewritable
(DVD+RW)
Compact Discs (CDs)
28
EN
• Picture (Kodak, JPEG) files on CDR(W)
• DivX(R) disc on CD-R(W):
• DivX 3.11, 4.x and 5.x
• WMA
Supported MP3-CD formats:
• ISO 9660
• Max. title/album name: 12 characters
• Max. title number plus album: 255.
• Max. nested directory: 8 levels.
• Max. album number: 32.
• Max. MP3 track number: 999.
• Supported sampling frequencies for MP3
disc: 32 kHz, 44.1 kHz, 48 kHz.
• Supported Bit-rates of MP3 disc are: 32,
64, 96, 128, 192, 256 (kbps).
• These formats are not supported:
• Files like *.VMA, *.AAC, *.DLF,
*.M3U, *.PLS, *.WAV
• Non-English Album/Title name
• Discs recorded in Joliet format
• MP3 Pro and MP3 with ID3 tag
USB playability information
Compatible USB devices:
• USB flash memory (USB 2.0 or USB1.1)
• USB flash players (USB 2.0 or USB1.1)
• memory cards (requires an additional
card reader to work with the Hi-Fi
system)
Supported formats:
• USB or memory file format FAT12,
FAT16, FAT32 (sector size: 512 bytes)
• MP3 bit rate (data rate): 32-320 Kbps and
variable bit rate
• WMA v9 or earlier
• Directory nesting up to a maximum of 8
levels
• Number of albums/ folders: maximum 99
• Number of tracks/titles: maximum 999
• ID3 tag v2.0 or later
• File name in Unicode UTF8 (maximum
length: 128 bytes)
RDS program types
Engl i sh
Unsupported formats:
• Empty albums: an empty album is an
album that does not contain MP3/WMA
files, and is not be shown in the display.
• Unsupported file formats are skipped. For
example, Word documents (.doc) or MP3
files with extension .dlf are ignored and
not played.
• AAC, WAV, PCM audio files
• DRM protected WMA files (.wav, .m4a,
.m4p, .mp4, .aac)
• WMA files in Lossless format
NO TYPE
No RDS programme
type
NEWS
News services
AFFAIRS
Politics and current
affairs
INFO
Special information
programs
SPORT
Sports
EDUCATE
Education and advanced
training
Maintenance
DRAMA
Radio plays and
literature
Clean the cabinet
• Use a soft cloth slightly moistened with
a mild detergent solution. Do not use
a solution containing alcohol, spirits,
ammonia or abrasives.
CULTURE
Culture, religion and
society
SCIENCE
Science
VARIED
Entertainment programs
POP M
Pop music
Clean discs
• When a disc becomes dirty, clean it with
a cleaning cloth. Wipe the disc from the
centre out.
ROCK M
Rock music
MOR M
Light music
LIGHT M
Light classical music
CLASSICS
Classical music
OTHER M
Special music programs
WEATHER
Weather
FINANCE
Finance
CHILDREN
Children’s programs
SOCIAL
Social Affairs
RELIGION
Religion
PHONE IN
Phone In
TRAVEL
Travel
LEISURE
Leisure
JAZZ
Jazz Music
COUNTRY
Country Music
NATION M
National Music
OLDIES
Oldies Music
FOLK M
Folk Music
DOCUMENT
Documentary
TES
Alarm Test
ALARM
Alarm
•
Do not use solvents such as benzene,
thinner, commercially available cleaners,
or antistatic spray intended for analogue
records.
Clean the disc lens
• After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure
good play quality, clean the disc lens
with Philips CD lens cleaner or any
commercially available cleaner. Follow the
instructions supplied with cleaner.
EN
29
11 Troubleshooting
Note
• Never remove the casing of this system.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
system, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site (www.
Philips.com/support). When you contact Philips,
ensure that your Philips is nearby and the model
number and serial number are available.
No power.
•
Ensure that the AC cord of the apparatus
is connected properly.
•
Ensure that there is power at the AC
outlet.
•
As a power-saving feature, the system
switches off automatically 15 minutes
after track play reaches the end and no
control is operated.
No disc detected.
•
Insert a disc.
•
Check if the disc is inserted upside down.
•
Wait until the moisture condensation at
the lens has cleared.
•
Replace or clean the disc.
•
Use a finalized CD or correct format disc.
No picture.
•
Check the video connection.
•
Turn on the TV to the correct Video-In
channel.
•
Progressive scan is activated but the TV
does not support progressive scan.
Black and white or distorted picture.
•
The disc does not match the TV color
system standard (PAL/NTSC).
•
Sometimes a slight picture distortion may
appear. This is not a malfunction.
•
Clean the disc.
•
A distorted picture may appear during
progressive scan setup.
30
EN
The aspect ratio of the TV screen cannot be
changed even though you have set the TV
display format.
•
The aspect ratio if fixed on the loaded
DVD disc.
•
The aspect ratio may not be changed for
some TV systems.
No sound or poor sound.
•
Adjust the volume.
•
Disconnect the headphone.
•
Ensure the wireless subwoofer is
connected.
Remote control does not work.
•
Before pressing any function button, first
select the correct source with the remote
control instead of the main unit.
•
Reduce the distance between the remote
control and the Micro System.
•
Insert the battery with its polarities (+/–
signs) aligned as indicated.
•
Replace the battery.
•
Aim the remote control directly at the
sensor on the front of the Micro System.
Disc does not play.
•
Insert a readable disc and ensure that the
label side faces outwards.
•
Check the disc type, color system and
regional code. Check for any scratches or
smudges on the disc.
•
Press SYSTEM MENU to exit the system
setup menu.
•
Disable the password for parental control
or change the rating level.
•
Moisture has condensed inside the
system. Remove the disc and leave the
system turned on for about an hour.
Disconnect and reconnect the AC power
plug, and then turn on the system again.
•
As a power-saving feature, the system
turns off automatically 15 minutes after
disc play reaches the end and no control
is operated.
Poor radio reception.
•
Increase the distance between the system
and your TV or VCR.
•
Fully extend the FM antenna.
•
Connect an outdoor FM antenna instead.
Engl i sh
Wireless connection fails.
•
Set up wireless connection manually.
Unable to select Progressive Scan.
•
Ensure the video output mode is set to
[Pr/Cr Pb/Cb Y].
No sound on HDMI connection.
• You may not hear any sound if the
connected device is non-HDCP
compliant or only DVI-compatible.
No picture on HDMI connection.
• Check if the HDMI cable is faulty. Replace
a new HDMI cable.
• If this happens when you change the
HDMI video resolution, select the correct
resolution until the picture appears.
Audio or subtitle languages cannot be set.
•
The disc is not recorded with sound or
subtitles in multiple languages.
•
The audio or subtitle language setting is
prohibited on the disc.
Cannot display some files in USB device or
memory card.
•
The number of folders or files in the USB
device or memory card has exceeded a
certain limit. This phenomenon is not a
malfunction.
•
The formats of these files are not
supported.
USB device or memory card not supported.
•
The USB device or memory card is
incompatible with the apparatus. Try
another one.
Timer does not work.
•
Set the clock correctly.
•
Switch on the timer.
Clock/timer setting erased.
•
Power has been interrupted or the power
cord has been disconnected.
•
Reset the clock/timer.
EN
31
© 2009 Koninklijke Philips Electronics N.V.
All rights reserved.
MCD289_12_UM_V3.0Document order number:
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement