Philips CD1553B/05, CD1553B/79, CD1552B/79, CD1502B/79, CD1551B/79, CD1501B/90, CD1503B/79, CD1501B/79, CD1502B/90, CD1554B/05 Quick start guide

Philips CD1553B/05, CD1553B/79, CD1552B/79, CD1502B/79, CD1551B/79, CD1501B/90, CD1503B/79, CD1501B/79, CD1502B/90, CD1554B/05 Quick start guide
Register your product and get support at
www.philips.com/welcome
Call from the phonebook
d in idle mode.
Scroll : to a phonebook entry.
Press r.
1. Press
2.
3.
The call is initiated.
Listen to messages recorded on the answering machine (for answering machine
phone only)
o on the base station to turn on the answering machine (the LED is turned on).
Press o again to turn off the answering machine (the LED is turned off).
Press p on the base station to play phone messages (the last recorded message
Press
will be played first).
s to skip the current message and play the next message.
Press R to go back to the previous message (if pressed within 1 second of current
Press
message playback).
Press
R to replay current message (if pressed after 1 second of current message
playback).
-+ to adjust speaker volume during message playback.
Press f to delete the current message.
Press
Refer to your new phone's User Manual for details about the answering machine function.
Troubleshooting
For more information, please refer to the User Manual that came with your
phone.
Problem
Solution
• There’s no dialling tone!
• Check the connections
• Charge the batteries
• Use the line cable provided
• Caller cannot hear me
clearly!
• Move closer to the base station
• Move the base station at least one metre away
from any electrical appliances
• SEARCHING... is
displayed on handset and
• Move closer to the base station
• Reset your unit and restart the handset registration
icon is blinking!
• Calller number is not
displayed!
• Check your subscription with your network
operator
Welcome to Philips!
Register your product and get support at
www.philips.com/welcome
Need help?
Quick start guide
User Manual
Refer to the User Manual that came with your new phone.
Online help
www.philips.com/support
©2008 Koninklijke Philips Electronics N.V.
All rights reserved.
Reproduction in whole or in part is prohibited without the written
consent of the copyright owner.
Document number: Master
Printed in China
1
Connect
2
Install
3
Enjoy
CD150
CD155
What’s in the box
1
Connect
3
Connect the base station
1. Place the base station in a central location near the telephone line socket and electricity socket.
Enjoy
Make a call
r
Dial the number (maximum 24 digits) and press
key.
OR
Press
key to take the line and dial the number (maximum 24 digits).
Base station with bracket
for your new basic phone
OR
r
Answer a call
When the phone rings, press
Handset
Battery door
your new answering
machine phone
2 AAA rechargeable
NiMH batteries
End a call
Power supply
To end a conversation, press
2. Connect the line cord and the power cable to their corresponding connectors at the
back of the base station.
3. Connect the other end of the line cord and power cable to their respective sockets.
Line cord*
2
Install
e key.
Adjust earpiece volume
During a call, press
: to select from VOLUME 1, VOLUME 2 or VOLUME
3.
Set the ring melody
m key in idle mode, scroll : to PERSONAL SET and press <OK,
: to HANDSET TONE and press <OK, scroll : to RING TONES
and press <OK.
Scroll : to your desired melody to play the melody.
Press <OK to set the ring melody.
1. Press
scroll
Insert rechargeable batteries and charge
Insert batteries
r key.
Charge handset for 24 hours
2.
3.
A validation tone is emitted and the screen returns to previous menu.
Store a contact in the phonebook
m key in idle mode, scroll : to PHONEBOOK and press <OK, press
<OK to enter NEW ENTRY.
1. Press
User manual
Warranty card
Quick Start Guide
*You may find in the box the line adaptor delivered separately from the line cable. In this
case, you have to connect the line adaptor to the line cord first before plugging the line
cord to the line socket.
In multihandset packs, you will find one or more additional handsets, chargers with power
supply units and additional rechargeable batteries.
WARNING Always use the cables and batteries that came with your phone.
Configure your phone (if necessary)
2. ENTER NAME is displayed on the screen.
After charging your phone for a few minutes, a Welcome screen may appear depending on
the country where you live. If the Welcome screen appears:
3. Enter the name of the contact (maximum 12 characters) and press
<
:
<
1. Press
OK to display a list of countries.
2. Scroll
to find your country.
OK to confirm your selection.
3. Press
Your phone is now ready for use.
4. Enter the number (maximum 24 digits) and press
<OK.
A validation tone is emitted.
Access the phonebook
1. Press
d in idle mode and scroll : to browse the phonebook.
<OK.
2. To view the details, press
<OK.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement