Philips FWV135/98 Quick start guide

Philips FWV135/98 Quick start guide
FWV135
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
Composite Video Cable
Quic
art
Remote control
( batteries not included)
2
1
k St
MW antenna
User Man
ual
Guid
e
Quick start guide
FWV135 QUG_Eng-98
1
User manual
16/2/06, 13:49
Important!
– Before connecting the AC power cord
to the wall outlet, make sure that the
VOLTAGE SELECTOR (located on the rear
of the system) is adjusted to match the
local power voltage.
Tip
1
Connect the speaker wires to the system’s SPEAKERS terminals.
2
Connect the supplied MW loop antenna.
3
– It is unnecessary to connect the FM
pigtail antenna since it is fixed to the
main unit.
Connect your FWV135 and TV using the supplied composite video cable.
4
Connect the power cord of the system to AC power outlet.
Television
L
IN
R
IN
FM pigtail antenna
Speaker
(right)
2
3
MW loop antenna
Speaker
(left)
VIDEO OUT
1
1
4
AC power cord
FWV135 QUG_Eng-98
2
16/2/06, 13:49
Tip
Setting up the TV
– Press and hold PAL/NTSC on the remote
to switch between PAL and NTSC to match
your TV system for clear disc viewing.
VCD/CD
TUNER
TAPE
AUX
VCD/CD
ECHO
1
KEY
Press DISC (VCD/CD on the remote) to select disc source.
PROG
ALBUM
ALBUM
PAL/
NTSC
DBB
REPEAT
2
SHUFFLE
DSC
REPEAT
ZOOM
A-B
PBC
DISPLAY
Setting the clock
DIGEST
OSD
PAL/
NTSC
Turn on the TV and set it to the correct Video In channel.
RETURN
GOTO
RESUME
CLOCK SET
VCD/CD
TIMER
TUNER
TAPE
SLOW AUDIO/VOCAL
SLEEP
MUTE
AUX
1
In standby mode, press briefly CLOCK•TIMER (or press and hold CLOCK SET on the
remote).
ECHO
KEY
PROG
ALBUM
2
ALBUM
When the clock digits flash, press ALBUM-/+ 1/¡ ( or ALBUM 3/4 on the remote)
to set the hours; press TITLE -/+í/ë (or 4 / ¢ on the remote) to set the minutes.
3
16/2/06, 13:49
REPEAT
DISPLAY
PBC
RETURN
ZOOM
DIGEST
OSD
CLOCK SET
FWV135 QUG_Eng-98
DSC
SHUFFLE
A-B
ALBUM
GOTO
Press CLOCK•TIMER (or CLOCK SET on the remote) to confirm the clock setting.
PAL/
NTSC
DBB
REPEAT
CLOCK SET
3
ALBUM
RESUME
TIMER
SLOW AUDIO/VOCAL
SLEEP
MUTE
PUSH
Playing a disc
1
Press PUSH on the top of the system to open the disc tray.
2
Load in a disc with the label side facing up, then close the disc door.
3
Playback will start automatically. If not, pressÉÅ.
4
To stop playback, press 9.
Programming and tuning to radio stations
1
Press TUNER/BAND (TUNER on the remote) to select tuner source (FM or MW).
2
Press and hold SEARCH 1 or ¡ (4 / ¢ on the remote) until the frequency on
the display starts running. The radio automatically tunes to a station of sufficient reception.
3
Press PROGRAM (PROG on the remote) to activate programming.
“PROG” flashes on the display.
4
Press PRESETí/ë (S T on the remote) to allocate a number
(FM: 1 to 20; AM: 1 to 10)
5
Press PROGRAM (PROG on the remote) again to confirm the setting.
“PROG” disappears from the display.
6
Press PRESETí/ë (S T on the remote) until the desired preset station is displayed.
Notes for remote control:
– First, select the source you wish to
control by pressing one of the source select
keys on the remote control (VCD/CD or
TUNER, for example).
– Then select the desired function ( 2;,
í, ë for example).
Tip
Detailed playback features and
additional functions are described in the
accompanied owner's manual.
2006 C Koninklijie Philips Electronics
N.V. All rights reserved.
http://www.philips.com
FWV135 QUG_Eng-98
4
PDCC-JH-0607
16/2/06, 13:49
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement