Register your product and get support at
www.philips.com/welcome
MCM330
EN User manual
3
FR Mode d’emploi
63
DA Brugervejledning
17
IT
Manuale utente
79
DE Benutzerhandbuch
31
NL Gebruiksaanwijzing
95
ES Manual del usuario
47
SV Användarhandbok
111
1 Important
Safety
Notice
2 Your product
Introduction
What’s in the box
Overview of the main unit
Overview of the remote control
3 Get started
Placement
Prepare the remote control
Connect power
Auto install radio stations
Set clock
Turn on
4 Play
Play disc
Play from USB or SD/MMC
Play from an external device
5 Play options
Repeat play
Random play
Program tracks
6 Adjust sound
Adjust volume level
Mute sound
Select a preset sound effect
Enhance bass
Immerse music over a wider spot
Listen through headphone
4
4
5
6
6
6
7
8
9
9
9
9
10
10
10
7 Listen to radio
Tune to a radio station
Program radio stations automatically
Program radio stations manually
Select a preset radio station
FM stations with RDS
Other features
8 Product information
12
12
13
13
13
13
13
14
14
15
15
15
6SHFLÀFDWLRQV
USB playability information
Supported MP3 disc formats
Maintenance
9 Troubleshooting
16
11
11
11
11
11
11
11
12
12
12
12
12
12
12
12
EN
3
English
Contents
1 Important
Safety
Important Safety Instructions
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
g Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
h Do not install near any heat sources
such as radiators, heat registers, stoves,
RURWKHUDSSDUDWXVLQFOXGLQJDPSOLÀHUV
that produce heat.
i Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.
j Only use attachments/accessories
VSHFLÀHGE\WKHPDQXIDFWXUHU
k Use only with the cart,
stand, tripod, bracket,
RUWDEOHVSHFLÀHGE\WKH
manufacturer or sold with
the apparatus. When a cart
is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.
l Unplug this apparatus during lightning
storms or when unused for long periods
of time.
m 5HIHUDOOVHUYLFLQJWRTXDOLÀHGVHUYLFH
personnel. Servicing is required when
the apparatus has been damaged in any
4
EN
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
n Battery usage CAUTION – To prevent
battery leakage which may result in
bodily injury, property damage, or
damage to the unit:
Install all batteries correctly, + and as marked on the unit.
Do not mix batteries (old and new
or carbon and alkaline, etc.).
Remove batteries when the unit is
not used for a long time.
Batteries (battery pack or batteries
installed) shall not be exposed to
H[FHVVLYHKHDWVXFKDVVXQVKLQHÀUH
or the like.
o Apparatus shall not be exposed to
dripping or splashing.
p Do not place any sources of danger on
WKHDSSDUDWXVHJOLTXLGÀOOHGREMHFWV
lighted candles).
q Where the plug of the Direct Plugin Adapter is used as the disconnect
device, the disconnect device shall
remain readily operable.
Warning
Never remove the casing of this apparatus.
Never lubricate any part of this apparatus.
Never place this apparatus on other electrical
equipment.
Keep this apparatus away from direct sunlight,
QDNHGÁDPHVRUKHDW
Never look into the laser beam inside this
apparatus.
Ensure that you always have easy access to the
power cord, plug or adaptor to disconnect this
apparatus from the power.
Notice
Listen at a moderate volume.
Using headphones at a high volume can
impair your hearing. This product can
produce sounds in decibel ranges that
may cause hearing loss for a normal
person, even for exposure less than a
minute. The higher decibel ranges are
offered for those that may have already
experienced some hearing loss.
Sound can be deceiving. Over time your
hearing ‘comfort level’ adapts to higher
volumes of sound. So after prolonged
listening, what sounds ‘normal’ can
actually be loud and harmful to your
hearing. To guard against this, set your
volume to a safe level before your hearing
adapts and leave it there.
This product complies with the
radio interference requirements
of the European Community.
This product complies with the
requirements of the following directives and
guidelines: 2004/108/EC + 2006/95/EC
$Q\FKDQJHVRUPRGLÀFDWLRQVPDGHWRWKLV
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
To establish a safe volume level:
Set your volume control at a low setting.
Slowly increase the sound until you can
hear it comfortably and clearly, without
distortion.
Listen for reasonable periods of time:
Prolonged exposure to sound, even
at normally ‘safe’ levels, can also cause
hearing loss.
Be sure to use your equipment
reasonably and take appropriate breaks.
Be sure to observe the following guidelines
when using your headphones.
Listen at reasonable volumes for
reasonable periods of time.
Be careful not to adjust the volume as
your hearing adapts.
Do not turn up the volume so high that
you can’t hear what’s around you.
You should use caution or temporarily
discontinue use in potentially hazardous
situations. Do not use headphones while
operating a motorized vehicle, cycling,
VNDWHERDUGLQJHWFLWPD\FUHDWHDWUDIÀF
hazard and is illegal in many areas.
Your product is designed and
manufactured with high quality
materials and components, which
can be recycled and reused.
When this crossed-out wheeled
bin symbol is attached to a
product it means that the
product is covered by the
European Directive 2002/96/EC.
Please inform yourself about the
local separate collection system for electrical
and electronic products.
Please act according to your local rules and do
not dispose of your old products with your
normal household waste. Correct disposal of
your old product helps to prevent potential
negative consequences for the environment
and human health.
Your product contains batteries
covered by the European
Directive 2006/66/EC, which
cannot be disposed with
normal household waste.Please
inform yourself about the local rules on
separate collection of batteries because
correct disposal helps to prevent negative
consequences for the environmental and
human health.
EN
5
English
Hearing safety
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can be
recycled and reused if disassembled by a
specialized company. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
Windows Media and the
Windows logo are trademarks,
or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
This apparatus includes this label:
2 Your product
Congratulations on your purchase, and
ZHOFRPHWR3KLOLSV7RIXOO\EHQHÀWIURPWKH
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this unit, you can enjoy audio from discs,
USB devices, external devices, or radio stations.
For the best sound quality, enrich sound with
Digital Sound Control (DSC) and Dynamic Bass
Boost.
The Living Sound lets you enjoy immersive
music over a much wider spot.
The powerful speakers of the unit bring you
rich sound experience.
What’s in the box
Norge
7\SHVNLOWÀQQHVSnDSSDUDWHQVXQGHUVLGH
Observer: Nettbryteren er sekundert innkoplet.
Den innebygde netdelen er derfor ikke
IUDNRSOHWQHWWHWVnOHQJHDSSDUDWHWHUWLOVOXWWHW
nettkontakten.
)RUnUHGXVHUHIDUHQIRUEUDQQHOOHUHOHNWULVNVW¡W
skal apparatet ikke utsettes for regn eller fuktighet.
6
EN
Check and identify the contents of your package:
Main unit
Remote control
1 x AC adaptor
1 x MP3 link cable
Mounting kit (2 dowels and 2 screws)
Quick start guide
User manual
Wall mounting instructions
English
Overview of the main unit
a
Jack for the headphone.
j
b SD/MMC
Jack for a SD/MMC card.
c
Jack for a USB mass storage device.
d MP3 LINK
Audio input jack (3.5mm ) for an
external audio device.
e
/
k SOURCE
Select a source.
l
Open/close the disc compartment.
f LIVING SOUND
Turn on or off the Living Sound
effect.
Skip to the previous/next track.
Search within a track/ disc/USB.
Tune to a radio station.
Select 12 hour or 24 hour format.
Adjust time.
Turn on the unit, or switch to
standby mode, or switch to Eco
Power standby.
m DC IN
Jack for the supplied AC adaptor.
Stop play or erase a program.
n FM antenna
Improve FM reception.
Start or pause play.
o Display panel
Show current status.
g
h
i VOLUME + / Adjust volume.
p Disc compartment door
q iR
Remote sensor.
EN
7
Overview of the remote
control
d SHUFFLE
Play tracks randomly.
e OPEN/CLOSE
Open or close the disc
compartment.
f
Start or pause play.
/
/
Search within a track/ disc/USB.
Tune to a radio station.
Skip to the previous/next track.
Select a preset radio station.
Select 12 hour or 24 hour format.
Adjust time.
g CLOCK SET
Set the clock.
h
Stop play or erase a program.
i ALBUM +/ Skip to the previous/next album.
j LIVING SOUND
Turn on or off the Living Sound
effect.
k Numeric keypad
Select a track from a disc directly.
l PROG
Program tracks.
Program radio stations.
m RDS
Select RDS broadcast information.
a
Turn on the unit, or switch to
standby mode, or switch to Eco
Power standby.
b Source selection keys
Select a source.
c REPEAT
Play a track or all tracks repeatedly.
8
EN
n DIM
Select different levels of display
brightness.
o DSC
Select a preset sound equalizer
setting.
p DBB
Turn on or off dynamic bass
enhancement.
r VOL +/ Adjust volume.
Prepare the remote control
Caution
Risk of explosion! Keep batteries away from
KHDWVXQVKLQHRUÀUH1HYHUGLVFDUGEDWWHULHV
LQÀUH
s DISPLAY
Select display information.
t TIMER ON/OFF
Turn on or off alarm timer.
u TIMER
Set the alarm timer.
v SLEEP
Set the sleep timer.
3 Get started
English
q MUTE
Mute volume.
)RUÀUVWWLPHXVH
1
Remove the protective tab to activate the
remote control battery.
To replace the remote control battery:
1
2
Open the battery compartment.
3
Close the battery compartment.
Insert 1 CR2025 battery with correct
polarity (+/-) as indicated.
Caution
Use of controls or adjustments or
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Placement
<RXFDQSODFHWKHXQLWRQDÁDWVXUIDFHRU
mount the unit on a wall.
Mount on a wall
To wall mount the unit, see the included
separate sheet of wall mounting instructions.
Note
Before pressing any function button on the
UHPRWHFRQWUROÀUVWVHOHFWWKHFRUUHFWVRXUFH
with the remote control instead of the main
unit.
If you are not going to use the remote control
for a long time, remove the battery.
Connect power
Caution
Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the bottom of the unit.
Risk of electric shock! When you unplug the
AC adaptor, always pull the plug from the
socket. Never pull the cord.
Before connecting the AC adaptor, ensure you
have completed all other connections.
EN
9
» The unit automatically stores radio
VWDWLRQVZLWKVXIÀFLHQWVLJQDOVWUHQJWK
Note
» When all the available radio stations
DUHVWRUHGWKHÀUVWSUHVHWUDGLRVWDWLRQ
is broadcast automatically.
The type plate is located on the bottom of the
main unit.
1
Connect one end of the AC adaptor to
the DC IN socket on the bottom of the
main unit.
Set clock
1 In the standby mode, press CLOCK SET
to enter the clock setting mode.
2
Connect the other end of the AC
adaptor to the wall outlet.
2
Press / repeatedly to select 12 hour or
24 hour format.
3
Press CLOCK SETWRFRQÀUP
» The hour digits are displayed and begin
to blink.
4
5
Press / to set the hour.
6
7
Press / to set the minute.
Press CLOCK SETWRFRQÀUP
» The minute digits are displayed and
begin to blink.
Press CLOCK SETWRFRQÀUPWKHFORFN
setting.
Turn on
1 Press .
» The unit switches to the last selected
source.
Auto install radio stations
When you connect power and no radio
stations are stored, the unit automatically begins
to store radio stations.
1
2
Connect the unit to the power supply.
» [AUTO INSTALL - PRESS PLAY] (auto
install - press the PLAY button) is
displayed.
Press
on the main unit to start
installation.
» [AUTO] (auto) is displayed.
Switch to standby
1
Press again to switch the unit to
standby mode.
» The clock (if set) appears on the
display panel.
To switch the unit to Eco Power Standby mode:
1
In the standby mode, press and hold
for more than 2 seconds.
» The backlight on the display panel turns off.
Tip
To display clock after the unit switched to eco
power standby mode, press
10
EN
again.
Play disc
1 Press CD to select the disc source.
2 Press OPEN/CLOSE to open the disc
3
4
5
compartment.
3
Insert a disc with the printed side facing
outward, then press OPEN/CLOSE to
close the disc compartment.
4
If the disc doesn’t play, press
.
To pause/resume play, press
.
To stop play, press .
To select another track, press / or
press a numeric button.
To select an album, press ALBUM
+/-.
To search within a track, press and
hold / , then release to resume
normal play.
Press ALBUM +/- to select a folder.
Press / WRVHOHFWDQDXGLRÀOH
If the disc doesn’t play, press
.
To pause/resume play, press
.
To stop play, press .
7RVHDUFKZLWKLQDQDXGLRÀOHSUHVV
and hold / , then release to
resume normal play.
Play from an external device
You can also listen to an external audio device
through this unit.
1
Press MP3 LINK to select the MP3 link
source.
2
Connect the supplied MP3 link cable to:
the MP3 LINK jack (3.5mm) on the
unit.
the headphone jack on an external
device.
3
Start to play the device (see the device
user manual).
Play from USB or SD/MMC
5 Play options
Repeat play
1 During play, press REPEAT repeatedly to
Note
Ensure that the USB device contains playable
audio contents for supported formats. (see
‘USB playability information’ on page 15)
1
Insert the USB plug of the device into the
socket, or the SD/MMC card into the
SD/MMC socket.
2
Press USB/SD to select the USB source,
or the SD source.
select:
[REP] (repeat): the current track is
played repeatedly.
[REP ALL] (repeat all): all tracks are
played repeatedly.
2
To return to normal play, press REPEAT
repeatedly until repeat mode is no longer
displayed.
Random play
1 Press SHUFFLE.
» >6+8)@VKXIÁHDOOWUDFNVDUHSOD\HG
randomly.
EN
11
English
4 Play
2
To return to normal play, press SHUFFLE
again.
Select a preset sound effect
1 During play, press DSC repeatedly to
select:
[POP] (pop)
[JAZZ] (jazz)
[CLASSIC] (classic)
[ROCK] (rock)
Tip
7KHUHSHDWDQGVKXIÁHIXQFWLRQVFDQQRWEH
activated at the same time.
6KXIÁHSOD\FDQQRWEHVHOHFWHGZKHQ\RXSOD\
programmed tracks.
Program tracks
You can program a maximum of 40 tracks.
1
At CD/USB/SD mode, in the stop
position, press PROG to activate the
program mode.
» [PROG] (program) is displayed.
2
For MP3/WMA tracks, press ALBUM +/to select an album.
3
Press / to select a track, then press
PROGWRFRQÀUP
4
Repeat steps 2 to 3 to select and store all
tracks to program.
5
Press
to play the programmed tracks.
» During play, [PROG] (program) is
displayed.
To erase the program, in the stop
position, press .
6 Adjust sound
Adjust volume level
1 During play, press VOL +/- to increase/
decrease the volume level.
Enhance bass
1 During play, press DBB to turn or or off
dynamic bass enhancement.
» If DBB is activated, DBB is displayed.
Immerse music over a wider
spot
1 During play, press LIVING SOUND on
the remote control to turn on or off the
sound effect.
» If Living Sound is activated, is
displayed.
Listen through headphone
1 Plug a headphone into the on the top
of the unit.
7 Listen to radio
Tune to a radio station
1 Press TUNER to select FM.
2 Press and hold / for more than 2
seconds.
» [SEARCH] (search) is displayed.
Mute sound
1 During play, press MUTE to mute/unmute
sound.
12
EN
» The radio tunes to a station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
To tune to a weak station, press
/ UHSHDWHGO\XQWLO\RXÀQGRSWLPDO
reception.
You can program a maximum of 20 preset
radio stations (FM).
1
In the tuner mode, press and hold PROG
for more than 2 seconds to activate
automatic program mode.
» [AUTO] (auto) is displayed.
» All available stations are programmed
in the order of waveband reception
strength.
» 7KHÀUVWSURJUDPPHGUDGLRVWDWLRQLV
broadcast automatically.
Program radio stations
manually
You can program a maximum of 20 preset
radio stations (FM).
FM stations with RDS
Radio Data System (RDS) is a service that
sends additional broadcast information along
with FM stations.
If you listen to a FM station with RDS signal,
“RDS” is displayed.
Display RDS information
1
For a FM station with RDS, press RDS
repeatedly to display various broadcast
information.
Other features
Set the alarm timer
This unit can be used as an alarm clock. The
disc/radio/USB/SD/MMC is activated to play at
a preset time.
1
Ensure that you have set the clock
correctly.
Press PROG to activate program mode.
» [PROG] (program) is displayed.
2
3
Press
3
Press / to allocate a number to this
radio station, then press PROG to
FRQÀUP
4
4
Repeat the above steps to program other
stations.
Press CD, or TUNER or USB/SD to
select a source.
5
Press TIMERWRFRQÀUP
» The clock digits are displayed and
begin to blink.
6
7
8
Press / to set the hour.
1
2
Tune to a radio station.
Tip
To overwrite a programmed station, store
another station in its place.
Select a preset radio station
1 In tuner mode, press / to select a
preset number.
Tip
Position the antenna as far as possible from
TV, VCR or other radiation source.
For optimal reception, fully extend and adjust
the position of the antenna.
English
Program radio stations
automatically
to switch to standby mode.
Press TIMER.
» A prompt to select the source is
displayed.
Press TIMERWRFRQÀUP
Press / to set the minute.
» The timer is set and activated.
To deactivate or re-activate an alarm timer
1
Press TIMER ON/OFF repeatedly to
activate or deactivate timer.
» If timer is activated, the display shows
.
» If timer is deactivated,
the display.
disappears on
EN
13
Set the sleep timer
Disc
This unit can switch to standby automatically
after a set period of time.
Laser type
Disc diameter
Support disc
1
When the unit is turned on, press SLEEP
repeatedly to select a set period of time
(in minutes).
» When sleep timer is activated, is
displayed.
To deactivate sleep timer
1
Press SLEEP repeatedly until [OFF] (off)
is displayed.
» When sleep timer is deactivated,
disappears on the display.
Adjust display brightness
1
Press DIM repeatedly to select different
levels of display brightness.
Semiconductor
12cm/8cm
CD-DA, CD-R, CD-RW,
MP3-CD, WMA-CD
24Bits / 44.1kHz
<1.5%
Audio DAC
Total harmonic
distortion
Frequency
60Hz -16kHz (44.1kHz)
response
Signal to noise ratio >75dBA
Tuner
Tuning range
Tuning grid
Number of presets
FM: 87.5 - 108MHz
50KHz
20 FM
Speakers
8 Product
information
Speaker Driver
Sensitivity
3.5”woofer+0.8” tweeter
>82dB/m/W
General information
Note
Product information is subject to change
AC power (power
adaptor)
without prior notice.
6SHFLÀFDWLRQV
$PSOLÀHU
Total output power 2X10W RMS
(with Living Sound off)
4 x 6W RMS
(with Living Sound on)
Frequency
125Hz - 16kHz, ±3dB
response
Signal to noise ratio >65dB
MP3 link input
0.5 V RMS 20kohm
14
EN
Operation Power
Consumption
Standby Power
Consumption
Eco Power Standby
Power Consumption
USB Direct
Dimensions
- Main Unit
(W x H x D)
Weight
- Main Unit
Input: 100-240V~,
50/60Hz, 1.5A Max.;
Output: 18V
2.5A; Brand name:
Philips; Model: OH1048B1802500U-VDE
20W
<2W
<1W
Version 2.0/1.1
571 x143 x 91mm
1.91 kg
Supported MP3 disc formats
Compatible USB devices:
86%ÁDVKPHPRU\86%RU86%
86%ÁDVKSOD\HUV86%RU86%
Supported formats:
86%RUPHPRU\ÀOHIRUPDW)$7
FAT16, FAT32 (sector size: 512 bytes)
MP3 bit rate (data rate): 32-320 Kbps and
variable bit rate
WMA v9 or earlier
Directory nesting up to a maximum of 8
levels
Number of albums/ folders: maximum 99
Number of tracks/titles: maximum 999
ID3 tag v2.0 or later
File name in Unicode UTF8 (maximum
length: 128 bytes)
Unsupported formats:
Empty albums: an empty album is an
album that does not contain MP3/WMA
ÀOHVDQGLVQRWEHVKRZQLQWKHGLVSOD\
8QVXSSRUWHGÀOHIRUPDWVDUHVNLSSHG)RU
example, Word documents (.doc) or MP3
ÀOHVZLWKH[WHQVLRQGOIDUHLJQRUHGDQG
not played.
$$&:$93&0DXGLRÀOHV
'50SURWHFWHG:0$ÀOHVZDYPD
.m4p, .mp4, .aac)
:0$ÀOHVLQ/RVVOHVVIRUPDW
ISO9660, Joliet
Maximum title number: 999 (depending
RQÀOHQDPHOHQJWK
Maximum album number: 99
Supported sampling frequencies: 32 kHz,
44.1kHz, 48 kHz
Supported Bit-rates: 32-320 (kbps),
variable bit rates
ID3 tag v2.0 or later
Directory nesting up to a maximum of 8
levels
Maintenance
Clean the cabinet
Use a soft cloth slightly moistened with
a mild detergent solution. Do not use
a solution containing alcohol, spirits,
ammonia or abrasives.
Clean discs
When a disc becomes dirty,
clean it with a cleaning
cloth. Wipe the disc from
the centre out.
Do not use solvents
such as benzene, thinner,
commercially available cleaners, or
antistatic spray intended for analogue
records.
Clean the disc lens
After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure
good play quality, clean the disc lens
with Philips CD lens cleaner or any
commercially available cleaner. Follow the
instructions supplied with cleaner.
EN
15
English
USB playability information
9 Troubleshooting
Warning
Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site www.
philips.com/welcome. When you contact Philips,
ensure that the apparatus is nearby and the
model number and serial number are available.
No power
Ensure that the AC power plug of the
unit is connected properly.
Ensure that there is power at the AC
outlet.
To save power, the unit switches to
standby automatically 15 minutes after
a play reaches the end and no control is
operated.
No sound
Adjust the volume.
No response from the unit
Disconnect and reconnect the AC power
plug, then turn on the unit again.
No disc detected
Insert a disc.
Check if the disc is inserted with the print
side facing inward.
Wait until the moisture condensation at
the lens has cleared.
Replace or clean the disc.
8VHDÀQDOL]HG&'RUFRUUHFWIRUPDWGLVF
Remote control does not work
%HIRUHSUHVVLQJDQ\IXQFWLRQEXWWRQÀUVW
select the correct source with the remote
control instead of the main unit.
Reduce the distance between the remote
control and the unit.
16
EN
Insert the battery with its polarities (+/–
signs) aligned as indicated.
Replace the battery.
Aim the remote control directly at the
sensor on the front of the unit.
&DQQRWGLVSOD\VRPHÀOHVLQ86%GHYLFH
7KHQXPEHURIIROGHUVRUÀOHVLQWKH86%
device has exceeded a certain limit. This
phenomenon is not a malfunction.
7KHIRUPDWVRIWKHVHÀOHVDUHQRW
supported.
USB device not supported
The USB device is incompatible with the
unit. Try another one.
Poor radio reception
Increase the distance between the unit
and your TV or VCR.
Fully extend and adjust the FM antenna.
Clock/timer setting erased
Power has been interrupted or the power
cord has been disconnected.
Reset the clock/timer.
Clock disappeared
The unit switched to eco power standby
mode. Press to display the clock.
Timer does not work
Set the clock correctly.
Switch on the timer.
© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
MCM330_12_UM_V2.0
">
