Philips Micro Hi-Fi System MC235B/37 User manual

Philips Micro Hi-Fi System MC235B/37 User manual
Micro Hi-Fi System
MC235B
Register your product and get support at
www.philips.com/welcome
Thank you for choosing Philips.
Need help fast?
Philips vous remercie de
votre confiance.
Gracias por escoger Philips
Besoin d'une aide
rapide?
Necesita ayuda
inmediata?
Read your Quick Start Guide and/or
User Manual first for quick tips
that make using your Philips product
more enjoyable.
If you have read your instructions
and still need assistance,
you may access our online help at
Le Guide rapide de début et Manuel de
l'utilisateur regorgent d'astuces destinées à
simplifier l'utilisation de votre produit Philips.
Toutefois, si vous ne parvenez pas à résoudre
votre probléme, vous pouvez accéder à
notre aide en ligne à l'adresse
www.philips.com/welcome
www.philips.com/welcome
Lea primero la Guía rápida del comienzo
o el Manual del usuario, en donde encontrará
consejos que le ayudarán a disfrutar
plenamente de su producto Philips.
Si después de leerlo aún necesita ayuda,
consulte nuestro servicio de
asistencia en línea en
or call
ou formez le
www.philips.com/welcome
1-888-PHILIPS (744-5477)
while with your product.
(and Model / Serial number)
1-800-661-6162 (Francophone)
1-888-PHILIPS (744-5477) (English speaking)
Veillez à avoir votre produit à
portée de main.
(et model / serial nombre)
1-888-PHILIPS (744-5477)
y tenga a mano el producto.
(y número de model / serial)
o llame al teléfono
2
1
!
3
5
7
@
0
8
%
*
#
$
&
^
(
)
1
3
4
2
5
6
7
3
8
!
9
0
3
4
IMPORTANT SAFETY INSTRUCTIONS
Clean only with dry cloth.
Where the MAINS plug or an appliance
coupler is used as the disconnet device,
the disconnet device shall remain
readily operable.
9
materials
Class II equipment symbol
This symbol indicates that the unit has
a double insulation system
5
Index
English
English ------------------------------------------------ 7
Français
Français -------------------------------------------- 20
Español
Canada
Español --------------------------------------------- 36
English:
This digital apparatus does not exceed
the Class B limits for radio noise
emissions from digital apparatus as set
out in the Radio Interference
Regulations of the Canadian
Department of Communications.
Français:
Cet appareil numérique n'emet pas
de bruits radioélectriques dépassant
les limites applicables aux appareils
numériques de Class B prescrites dans
le Règlement sur le Brouillage
Radioélectrique édicté par le Ministère
des Communications du Canada.
CAUTION
Use of controls or adjustments or
performance of procedures other
than herein may result in hazardous
radiation exposure or other unsafe
operation.
ATTENTION
L'utilisation des commandes ou
réglages ou le non-respect des
procédures ci-incluses peuvent se
traduire par une exposition
dangereuse à l'irradiation.
ATENCIÓN
El uso de mando o ajustes o la
ejecucción de métodos que no sean
los aquí descritos puede ocasionar
peligro de exposición a radiación.
6
Contents
Environmental information ................................ 8
Supplied accessories ............................................ 8
Safety information ................................................ 8
Preparations
Rear connections ........................................... 9–10
Optional connection ......................................... 10
Before using the remote control .................... 10
Replacing battery (lithium CR2025) into the
remote control ................................................... 10
Controls
Controls on the system and remote
control .................................................................. 11
Basic Functions
Switching the system on ................................... 12
Adjusting volume and sound ............................ 12
CD Operation
English
General Information
Hearing Safety
Listen at a moderate volume.
● Using headphones at a high volume can impair
your hearing. This product can produce sounds
in decibel ranges that may cause hearing loss for
a normal person, even for exposure less than a
minute. The higher decibel ranges are offered
for those that may have already experienced
some hearing loss.
● Sound can be deceiving. Over time your hearing
"comfort level" adapts to higher volumes of
sound. So after prolonged listening, what sounds
"normal" can actually be loud and harmful to
your hearing. To guard against this, set your
volume to a safe level before your hearing
adapts and leave it there.
To establish a safe volume level:
Playing a disc ........................................................ 13
Selecting a different track ................................. 13
Finding a passage within a track ...................... 13
Different play modes: Shuffle and Repeat ..... 14
Programming track numbers ........................... 14
Reviewing the programme ............................... 14
Erasing the programme ..................................... 14
● Set your volume control at a low setting.
Radio Reception
● Be sure to use your equipment reasonably and
take appropriate breaks.
Tuning to radio stations .................................... 15
Programming radio stations ............................. 15
Tuning to preset radio stations ....................... 15
Clock/Timer
Setting the clock ................................................. 16
Viewing the clock ............................................... 16
Setting the timer ................................................. 16
Activating and deactivating TIMER ................. 16
Activating and deactivating SLEEP .................. 16
Specifications ........................................... 17
Maintenance .............................................. 17
Troubleshooting .................................... 18
● Slowly increase the sound until you can hear it
comfortably and clearly, without distortion.
Listen for reasonable periods of time:
● Prolonged exposure to sound, even at normally
"safe" levels, can also cause hearing loss.
Be sure to observe the following
guidelines when using your headphones.
● Listen at reasonable volumes for reasonable
periods of time.
● Be careful not to adjust the volume as your
hearing adapts.
● Do not turn up the volume so high that you
can't hear what's around you.
● You should use caution or temporarily
discontinue use in potentially hazardous
situations.
● Do not use headphones while operating a
motorized vehicle, cycling, skateboarding, etc.; it
may create a traffic hazard and is illegal in many
areas.
7
General Information
English
Congratulations on your purchase, and welcome
to Philips! To fully benefit from the suppor t that
Philips offers, register your product at
www.philips.com/welcome.
This system complies with the FCC rules,
Part 15 and with 21 CFR 1040. 10.
Operation is subject to the following two
conditions:
– This device may not cause harmful
interference, and
– this device must accept any interference
received, including interference that may
cause undesired operation.
Environmental Information
All unnecessary packaging has been omitted. We
have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene (bags,
protective foam sheet).
Your system consists of materials which can be
recycled and reused if disassembled by a
specialized company. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
Your product is designed and manufactured with
high quality materials and components, which can be
recycled and reused.
Never dispose of your product with other
household waste. Please inform yourself about the
local rules on the separate collection of electrical
and electronic products and batteries. The correct
disposal of these products helps prevent potentially
negative consequences on the environment and
human health.
Your product contains batteries, which cannot be
disposed of with normal household waste. Please
inform yourself about the local rules on separate
collection of batteries. The correct disposal of
batteries helps prevent potentially negative
consequences on the environment and human
health.
Please visit www.recycle.philips.com for additional
information on a recycling center in your area.
Perchlorate Material - special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
8
Supplied accessories
–
–
–
–
–
–
2 speaker boxes
remote control (with battery)
AM loop antenna
FM wire antenna
stand
screw and plug assembly
Safety Information
● Before operating the system, check that the
operating voltage indicated on the typeplate (or
the voltage indication beside the voltage
selector) of your system is identical with the
voltage of your local power supply. If not, please
consult your dealer.
● Where the MAINS plug or an appliance coupler
is used as the disconnet device, the disconnect
device shall remain readily operable.
● Place the system on a flat, hard and stable
surface.
● Place the system in a location with adequate
ventilation to prevent internal heat build-up in
your system. Allow at least 10 cm (4 inches)
clearance from the rear and the top of the unit
and 5 cm (2 inches) from each side.
● The ventilation should not be impeded by
covering the ventilation openings with items,
such as newspapers, table-cloths, cur tains, etc.
● Do not expose the system, batteries or discs to
excessive moisture, rain, sand or heat sources
caused by heating equipment or direct sunlight.
● No naked flame sources, such as lighted candles,
should be placed on the apparatus.
● No objects filled with liquids, such as vases, shall
be placed on the apparatus.
● If the system is brought directly from a cold to a
warm location, or is placed in a very damp room,
moisture may condense on the lens of the disc
unit inside the system. Should this occur, the CD
player would not operate normally. Leave the
power on for about one hour with no disc in the
system until normal playback is possible.
● The mechanical parts of the set contain selflubricating bearings and must not be oiled or
lubricated.
● When the system is switched to Standby
mode, it is still consuming some power.
To disconnect the system from the
power supply completely, remove the AC
power plug from the wall socket.
AM loop
antenna
English
Preparations
FM wire antenna
Speakers
(left)
Speakers
(right)
AC power cord
Rear connections
The type plate is located at the rear of the
system.
A Power
B Antennas Connection
Connect the supplied AM loop antenna and FM
antenna to the respective terminals. Adjust the
position of the antenna for optimal reception.
AM Antenna
Before connecting the AC power cord to the
wall outlet, ensure that all other connections
have been made.
WARNING!
– For optimal performance, use only the
original power cable.
– Never make or change any connections
with the power switched on.
To avoid overheating of the system, a safety
circuit has been built in. Therefore, your
system may switch to Standby mode
automatically under extreme conditions. If
this happens, let the system cool down
before reusing it (not available for all versions).
● Position the antenna as far as possible from a TV,
VCR or other radiation source.
9
Preparations
English
FM Antenna
Before using the remote control
1
2
1
2
● For better FM stereo reception, connect an
outdoor FM antenna to the FM AERIAL (FM
ANTENNA) terminal.
C Speakers Connection
3
Pull out the plastic protective sheet.
Select the source you wish to control by
pressing one of the source select keys on the
remote control (for example CD, TUNER).
Then select the desired function (for example
ÉÅ , í , ë).
plastic
protective
sheet
Front Speakers
Connect the speaker wires to the SPEAKERS
terminals, right speaker to "RIGHT" and left
speaker to "LEFT", coloured (marked) wire to
"+" and black (unmarked) wire to "-".
● Fully insert the stripped portion of the speaker
wire into the terminal as shown.
Notes:
– For optimal sound performance, use the
supplied speakers.
– Do not connect more than one speaker to any
one pair of +/- speaker terminals.
– Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.
Replacing battery (lithium
CR2025) into the remote control
1 Pull out the knob A slightly to the left.
2 Pull out the battery compartment B .
3 Replace a new battery and fully insert the battery
compartment back to the original position.
Optional connection
The optional equipment and connecting cords
are not supplied. Refer to the operating
instructions of the connected equipment for
details.
Connecting other equipment to your
system
Connect the audio left and right OUT terminals
of a TV, VCR, Laser Disc player, DVD player or
CD Recorder to the AUX-IN terminals.
Note:
– If you are connecting equipment with a mono
output (a single audio out terminal), connect it to
the AUX IN left terminal. Alternatively, you can use
a “single to double” cinch cable (the output sound
still remain mono).
10
CAUTION!
Batteries contain chemical substances, so
they should be disposed off properly.
NOTE :
Perchlorate Material - special handling
may apply. See www.dtsc.ca.gov/
hazardouswaste/perchlorate.
Controls (illustrations on page 3)
1 STANDBY-ON
–
2
–
3
–
4
–
5
–
6
7
8
–
9
–
0
!
–
@
–
–
#
–
$
–
%
–
switches the system on or to standby.
Display
shows the status of the system.
OPEN • CLOSEç
opens/ closes the CD door.
IR
remote sensor
VOLUME (3 / 4 ) (+/-)
adjusts the volume level.
CD Door
Mode Selection
SEARCH/ TUNE (à / á)
for TUNER ........ tunes to a station
for CD ................. fast searches back and forward
within a track/ CD.
STOP 9 ............ stops CD playback or erases a
CD programme.
PLAYÉÅ ...... starts or interrupts playback.
PRESET (¡ / ™)
for TUNER ........ selects a preset radio station.
for CD ................. skips to the beginning of a
current track/ previous/
subsequent track
DBB (Dynamic Bass Boost)
enhances the bass.
BAND
selects a waveband.
PROGRAM
for CD ................. programmes tracks and reviews
the programme.
for TUNER ........ programmes tuner stations.
SOURCE
selects the respective sound source for CD/
TUNER/ AUX.
CLOCK SET
sets the clock function.
views the clock.
TIMER
activates/deactivates or sets the timer function.
SLEEP
activates/deactivates or selects the sleeper time.
DSC (Digital Sound Control)
selects sound characteristics: ROCK/ JAZZ/
POP/ CLASSIC.
^ RDS.NEWS
–
–
activates RDS news and Traffic Announcement
(not for all versions).
MUTE
interrupts and resumes sound reproduction.
REPEAT
repeats a track/ CD programme/ entire CD.
SHUFFLE
plays CD tracks in random order.
–
connects headphones
&
–
*
–
(
)
English
Controls on the system and
remote control
Notes for remote control:
– First select the source you wish to
control by pressing one of the source select
keys on the remote control (for example
CD,TUNER).
– Then select the desired function (for
example ÉÅ, ¡ , ™).
11
Basic Functions
English
Adjusting volume and sound
IMPORTANT!
Before you operate the system, complete
the preparation procedures.
Switching the system on
● Press STANDBY-ON / 2.
➜ The system will switch to the last selected
source.
● Press SOURCE (or CD, TUNER or AUX on
the remote control).
➜ The system will switch to the selected source.
● Press OPEN • CLOSEç.
To switch the system to standby mode
● Press STANDBY-ON / 2.
➜ The system enters the standby mode with
clock display.
● The volume level (up to a maximum volume
level of 20), interactive sound settings, source
and tuner presets will be retained in the player's
memory.
12
1
Press the VOLUME 3 / 4 (+/-) control to
decrease or increase the volume.
➜ Display shows the volume level VOL and a
number from MIN1, 2, ...30, 31 MAX.
2
Press DSC repeatedly to select the desired
sound effect: ROCK/ JAZZ/ POP/ CLASSIC.
3
Press DBB to switch bass enhancement on or
off.
➜ Display shows: DBB.
4
Press MUTE on the remote control to
interrupt sound reproduction instantly.
➜ Playback will continue without sound and the
display shows MUTE.
● To activate sound reproduction you can:
– press MUTE again;
– adjust the volume controls;
– change source.
4
PressÉÅto start playback.
➜ Current track number and elapsed playing
time of the track are displayed during disc
playback.
5
To interrupt playback pressÉÅ. PressÉÅ
again to resume play.
6
To stop disc playback, press STOP 9.
English
CD Operation
Note: CD play will also stop when;
– the CD door is opened.
– the disc has reached the end.
– you select another source: TUNER, AUX or
standby.
Selecting a different track
IMPORTANT!
The lens of the CD player should never be
touched.
Playing a disc
● Press í or ë once or repeatedly until the
desired track number appears in the display.
● If you have selected a track number shortly after
loading a disc or in the PAUSE position, you will
need to pressÉÅto start playback.
This CD player plays Audio Discs including CDRecordables and CD-Rewritables.
● CD-ROM, CD-I, CDV, VCD, MP3, DVD or
computer CDs, however, are not possible.
1
2
3
Finding a passage within a track
1
Press and hold à or á.
➜ The disc is played at high speed and low
volume.
2
When you recognise the passage you want,
release à or á.
➜ Normal playback continues.
Press SOURCE to select CD.
Press OPEN • CLOSEç on the front panel
of the system to open the CD compartment.
➜ OPEN is displayed when the compartment
cover slides up.
Insert a disc with the printed side facing up. Press
OPEN • CLOSEç again to close the
compartment.
➜ READING is displayed as the CD player scans
the contents of the disc.
➜ The total playing time and the total number
of tracks are displayed.
13
CD Operation
➜ The number of tracks programmed and the
total playing time of the programme are show
briefly, then the selected track and PROG.
English
Different play modes: SHUFFLE
and REPEAT
You can select and change the various play
modes before or during playback. The play
modes can also be combined with
PROGRAMME.
SHUFFLE ......... tracks of the entire disc/
programme are played in
random order
SHUFFLE and REPEAT ALL…to repeat the
entire disc/ programme
continuously in random order
REPEAT ALL ... repeats the entire disc/
programme
REPEAT ............ plays the current track
continuously
1
To select your play mode, press the SHUFFLE
or REPEAT button before or during playback
until the display shows the desired function.
2
Press ÉÅ to start playback if in the STOP
position.
➜ If you have selected SHUFFLE, playback starts
automatically.
3
To return to normal playback, press the
respective SHUFFLE or REPEAT button until
the various SHUFFLE/ REPEAT modes are no
longer displayed.
● You can also press STOP 9 to cancel your play
mode.
Programming track numbers
Programme in the STOP position to select and
store your disc tracks in the desired sequence. If
you like, store any track more than once. Up to
40 tracks can be stored in the memory.
1
Press PROGRAM to enter the programming
mode.
➜ A track number is shown and PROGRAM
flashes.
2
Use the í or ë to select your desired track
number.
3
Press PROGRAM to confirm the track number
to be stored.
14
4
Repeat steps 2-3 to select and store all desired
tracks.
➜ FULL is displayed if you attempt to
programme more than 40 tracks.
5
To start playback of your disc program, press
STOP 9 followed by ÉÅor press ÉÅdirectly.
Reviewing the programme
In STOP mode, press and hold down
PROGRAM for a while until the display shows
all your stored track numbers in sequence.
Erasing the programme
You can erase the programme by:
● pressing STOP 9 once in the STOP mode;
● pressing STOP 9 twice during playback;
● opening the CD compar tment;
➜ PROGRAM disappears.
➜ CLEAR scrolls and then disappears from the
display.
2
Press PROGRAM for more than 2 seconds to
activate programming.
➜ AUTO is displayed and available stations are
programmed in order of waveband reception
strength: FM followed by AM. The last preset
automatically stored will then be played.
Manual programming
Tuning to radio stations
1
Press SOURCE to select TUNER.
➜ TUNER is displayed briefly.
2
Press BAND (or TUNER on the remote
control) once or more to select your waveband.
(FM/ AM)
3
Press and hold TUNE à or á.
➜ The radio automatically tunes to a station
with sufficient reception. Display indication during
automatic tuning: SEARCH.
4
Repeat step 3 if necessary until you find the
desired station.
1
Tune to your desired station (see Tuning to radio
stations).
2
Press PROGRAM to activate programming.
➜ PROGRAM flashes in the display.
3
Press PRESET ¡ or ™ to allocate a number
from 1 to 40 to this station.
4
Press PROGRAM again to confirm the setting.
➜ PROGRAM disappears, the preset number and
the frequency of the preset station are shown.
5
Repeat the above four steps to store other
stations.
● You can override a preset station by storing
another frequency in its place.
Tuning to preset radio stations
● Press PRESET ¡ or ™ until the desired preset
station is displayed.
● To tune to a weak station, press TUNE à or
á briefly and repeatedly until you have found
optimal reception.
Programming radio stations
You can store up to a total of 40 radio stations
in the memory.
Automatic programming
Automatic programming will start with a chosen
preset number. From this preset number
upwards, former programmed radio stations will
be overridden. The system will only program
stations which are not in the memory already.
1
Press PRESET ¡ or ™ to select the preset
number where programming should start.
Note:
– If no preset number is selected, default is preset
(1) and all your presets will be overridden.
15
English
Radio Reception
Clock/Timer
English
➜ Display sequence shows CD, TUNER.
➜
flashes.
3
Press TIMER to confirm your desired mode.
4
5
Press VOLUME +/- to set the hours.
6
7
Press TIMER again.
➜ The clock digits for the minutes flash.
Press VOLUME +/- to set the minutes.
Press TIMER to confirm the time.
➜ The timer is now set and activated.
Activating and deactivating
TIMER
● Press TIMER on the remote to turn off the
timer or turn on to the last setting again.
Setting the clock
1
2
3
4
5
In standby mode or system on, press and hold
CLOCK SET on the remote control for more
than 3 seconds.
➜ SET CLOCK scrolls on the display.
➜ The clock digits for the hours flash.
Press VOLUME +/- to set the hours.
Activating and deactivating
SLEEP
Press VOLUME +/- to set the minutes.
The sleep timer enables the system to switch off
by itself after a set period of time. The clock time
needs to be set first before the sleep timer can
be used.
Press CLOCK SET to confirm the time.
Press SET CLOCK.
➜ The clock time is displayed.
Setting the timer
● The system can be used as an alarm clock,
whereby the CD, TUNER is switched on at a set
time. The clock time needs to be set first before
the timer can be used.
● During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
1 In standby mode or system on, press and hold
TIMER on the remote control for more than 3
seconds.
➜ SET TIMER and SELECT SOURCE scrolls
on the display.
16
Note:
– The system will exit timer setting mode if no
button is pressed within 90 seconds.
Press CLOCK SET again.
➜ The clock digits for the minutes flash.
Viewing the clock
2
➜ If activated, the timer information will display
for a few seconds, then the system resumes to
the last active source or stays in standby mode.
➜ If deactivated, “OFF” appears.
Press SOURCE or VOLUME +/- to select
sound source.
● Press SLEEP on the remote control once or
more.
➜ Display shows SLEEP and one of the sleep
time options in sequence: 90,
75, 60,..., 45,30,15, OFF, 90. if
you have selected a time. Once
SLEEP is activated, SLEEP
scrolls across the display at
repeated intervals.
● To deactivate, press SLEEP on the remote
control once or more until OFF is shown, or
press STANDBY-ON on the system or
remote control.
AMPLIFIER
Output power ................................. 20W total power
........................................................................... 2 x 5 W RMS
........................................................................ 2 x 4 W FTC(1)
Signal-to-noise ratio .......................... * 62 dBA (IEC)
Frequency response ......... 63 – 16000 Hz, ± 3 dB
Input sensitivity AUX ....................... 0.5 V (max. 2 V)
Impedance loudspeakers ......................................... 4 1
Impedance headphones .................... 32 1 -1000 1
(1) (41, 60Hz - 12.5Hz, 10% THD)
CD PLAYER
Frequency range .................................. 30 – 16000 Hz
Signal-to-noise ratio ............................................ 75 dBA
SPEAKERS
Bass reflex system
Dimensions (w x h x d) .... 166 x 245 x 90 (mm)
GENERAL INFORMATION
AC Power .................................... 110 - 220 V / 60 Hz
Dimensions (w x h x d) ..... 250 x 245 x 96 (mm)
Weight (with/without speakers) ..................................
............................................................... approx. 4.1 / 1.9 kg
Standby power consumption .......................... < 2 W
Subject to modification
TUNER
FM wave range ................................... 87.5 – 108 MHz
AM wave range .................................. 530 – 1700 kHz
Sensitivity at 300 1
– mono, 26 dB signal-to-noise ratio ............ 2.8 μV
– stereo, 46 dB signal-to-noise ratio ........ 61.4 μV
Selectivity ................................................................. * 28 dB
Total harmonic distortion ..................................... ) 5%
Frequency response ..... 63 – 12500 Hz (± 3 dB)
Signal-to-noise-ratio ...................................... * 50 dBA
Maintenance
Cleaning the Cabinet
● Use a soft cloth slightly moistened with a mild
detergent solution. Do not use a solution
containing alcohol, spirits, ammonia or abrasives.
Cleaning Discs
● When a disc becomes dirty,
clean it with a cleaning cloth.
Wipe the disc from the center
out.
● Do not use solvents such as
benzene, thinner, commercially
available cleaners, or antistatic
spray intended for analog records.
Cleaning the disc lens
● After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure good
playback quality, clean the disc lens with Philips
CD Lens Cleaner or any commercially available
cleaner. Follow the instructions supplied with
cleaner.
17
English
Specifications
Troubleshooting
English
WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the
warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If you
are unable to remedy a problem by following these hints, consult your dealer or Philips for
help.
Problem
CD OPERATION
“NO DISC” is displayed.
RADIO RECEPTION
Radio reception is poor.
GENERAL
The system does not react when buttons
are pressed.
Sound cannot be heard or is of poor
quality.
The left and right sound outputs are
reversed.
The remote control does not function
properly.
The timer is not working.
The Clock/Timer setting is erased.
18
Solution
– Insert a disc.
– Check if the disc is inserted upside down.
– Wait until the moisture condensation at the lens
has cleared.
– Replace or clean the disc, see “Maintenance”.
– Use a finalised CD-RW or CD-R.
– If the signal is too weak, adjust the antenna or
connect an external antenna for better reception.
– Increase the distance between the Micro HiFi
System and your TV or VCR.
– Remove and reconnect the AC power plug and
switch on the system again.
– Adjust the volume.
– Disconnect the headphones.
– Check that the speakers are connected correctly.
– Check if the stripped speaker wire is clamped.
– Check the speaker connections and location.
– Select the source (CD or TUNER, for example)
before pressing the function button (ÉÅ,í,
ë).
– Reduce the distance between the remote control
and the system.
– Insert the batteries with their polarities
(+/– signs) aligned as indicated.
– Replace the batteries.
– Point the remote control directly toward
IR sensor on the front of the system.
– Set the clock correctly.
– Press TIMER to switch on the timer.
– Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.
PHILIPS LIMITED WARRANTY
ONE (1) YEAR
WARRANTY COVERAGE:
PHILIPS warranty obligation is limited to the terms set forth
below.
WHO IS COVERED:
Philips warrants the product to the original purchaser or the person receiving the product as a gift against defects in materials and
workmanship as based on the date of original purchase
(“Warranty Period”) from an Authorized Dealer. The original
sales receipt showing the product name and the purchase date
from an authorized retailer is considered such proof.
WHAT IS COVERED:
The Philips warranty covers new products if a defect in material
or workmanship occurs and a valid claim is received by Philips
within the Warranty Period. At its option, Philips will either (1)
repair the product at no charge, using new or refurbished
replacement parts, or (2) exchange the product with a product
that is new or which has been manufactured from new, or serviceable used parts and is at least functionally equivalent or most
comparable to the original product in Philips current inventory,
or (3) refund the original purchase price of the product.
Philips warrants replacement products or parts provided under
this warranty against defects in materials and workmanship from
the date of the replacement or repair for ninety (90) days or for
the remaining portion of the original product’s warranty,
whichever provides longer coverage for you. When a product or
part is exchanged, any replacement item becomes your property
and the replaced item becomes Philips’ property. When a refund
is given, your product becomes Philips’ property.
Note: Any product sold and identified as refurbished or
renewed carries a ninety (90) day limited warranty.
Replacement product can only be sent if all warranty
requirements are met. Failure to follow all requirements
can result in delay.
WHAT IS NOT COVERED - EXCLUSIONS AND LIMITATIONS:
This Limited Warranty applies only to the new products manufactured by or for Philips that can be identified by the trademark,
trade name, or logo affixed to it. This Limited Warranty does not
apply to any non-Philips hardware product or any software, even
if packaged or sold with the product. Non-Philips manufacturers,
suppliers, or publishers may provide a separate warranty for their
own products packaged with the bundled product.
Philips is not liable for any damage to or loss of any programs,
data, or other information stored on any media contained within
the product, or any non-Philips product or part not covered by
this warranty. Recovery or reinstallation of programs, data or
other information is not covered under this Limited Warranty.
This warranty does not apply (a) to damage caused by accident,
abuse, misuse, neglect, misapplication, or non-Philips product, (b)
to damage caused by service performed by anyone other than
Philips or Philips Authorized Service Location, (c) to a product or
a part that has been modified without the written permission of
Philips, or (d) if any Philips serial number has been removed or
defaced, or (e) product, accessories or consumables sold “AS IS”
without warranty of any kind by including refurbished Philips
product sold “AS IS” by some retailers.
This Limited Warranty does not cover:
• Shipping charges to return defective product to Philips.
• Labor charges for installation or setup of the product, adjustment of customer controls on the product, and installation or
repair of antenna/signal source systems outside of the product.
• Product repair and/or part replacement because of improper
installation or maintenance, connections to improper voltage
supply, power line surge, lightning damage, retained images or
screen markings resulting from viewing fixed stationary content for extended periods, product cosmetic appearance items
due to normal wear and tear, unauthorized repair or other
cause not within the control of Philips.
• Damage or claims for products not being available for use, or
for lost data or lost software.
• Damage from mishandled shipments or transit accidents when
returning product to Philips.
• A product that requires modification or adaptation to enable
it to operate in any country other than the country for which
it was designed, manufactured, approved and/or authorized, or
repair of products damaged by these modifications.
• A product used for commercial or institutional purposes
(including but not limited to rental purposes).
• Product lost in shipment and no signature verification receipt
can be provided.
• Failure to operate per Owner’s Manual.
TO OBTAIN ASSISTANCE IN THE U.S.A., PUERTO
RICO, OR U.S. VIRGIN ISLANDS…
Contact Philips Customer Care Center at:
1-888-PHILIPS (1-888-744-5477)
TO OBTAIN ASSISTANCE IN CANADA…
1-800-661-6162 (French Speaking)
1-888-PHILIPS (1-888-744-5477) - (English or Spanish
Speaking)
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CONSUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF
ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE
LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT
IS LIMITED IN DURATION TO THE DURATION OF THIS
WARRANTY.
Some states do not allow the exclusions or limitation of incidental or consequential damages, or allow limitations on how long an
implied warranty lasts, so the above limitations or exclusions may
not apply to you.
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
Philips, P.O. Box 10313 Stamford, CT 06904
3140 035 50201
19
English
Philips Consumer Lifestyle
A division of Philips Electronics North America Corporation
P.O. Box 10313
Stamford, CT 06904
Phone: 1-888-PHILIPS (744-5477)
Meet Philips at the Internet
http://www.philips.com/welcome
Français
Español
MC235B
CLASS 1
LASER PRODUCT
Printed In China
MC235B_37_UM_V2.0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement