Philips AC3259/31 User manual

Philips AC3259/31 User manual
1
2
AC3259
G
A
B
F
C
EN
© 2017 Koninklijke Philips N.V.
All rights reserved.
4241 210 98081
User manual
1
ZH-T 使用手冊
19
D
E
H
I
J
K
L
M
3
4
5
6
23
24
25
26
7
8
9
10
27
28
29
30
3s
1
11
12
13
14
32
31
3s
15
16
17
18
35
33
3s
36
3s
19
20
3s
21
3s
22
3s
3s
34
3s
Eng lis h
Contents
1 Important Safety 2 Your air purifier Product overview (fig.a) Controls overview (fig.b) 2
2
5
5
5
6 Replacing the filter 11
Understanding the healthy
air protect lock Replacing the filters Filter type change 7 Troubleshooting 13
16
3 Getting started 5
Installing filters Wi-Fi setup 5
6
8 Guarantee and service 7
9 Notices 4 Using the appliance Understanding the air
quality light 7
Switching on and off 7
Changing the Auto mode
setting 7
Changing the fan speed 8
Setting the timer 8
Setting the child lock 8
Using the light on/off function 9
Switching the display mode 9
5 Cleaning Cleaning schedule Cleaning the body of the
appliance Cleaning the air quality
sensor Cleaning the pre-filter 11
11
12
Order parts or accessories 16
16
Electromagnetic fields (EMF) 16
Recycling 17
Software 17
9
9
9
10
10
Environmental friendly paper used. Thanks for your contribution to save trees.
EN
1
1Important
•
Safety
Read this user manual carefully before
you use the appliance, and save it for
future reference.
Danger
• Do not let water or any
other liquid or flammable
detergent enter the
appliance to avoid electric
shock and/or a fire
hazard.
• Do not clean the
appliance with water,
any other liquid, or a
(flammable) detergent to
avoid electric shock and/
or a fire hazard.
• Do not spray any
flammable materials
such as insecticides or
fragrance around the
appliance.
Warning
• Check if the voltage
indicated on the
appliance corresponds to
the local power voltage
before you connect the
appliance.
2
EN
•
•
•
If the power cord is
damaged, you must have
it replaced by Philips, a
service center authorized
by Philips, or similarly
qualified persons in order
to avoid a hazard.
Do not use the appliance
if the plug, the power
cord, or the appliance
itself is damaged.
This appliance can be
used by children aged
from 8 years and above
and persons with reduced
physical, sensory or
mental capabilities or
lack of experience and
knowledge if they have
been given supervision or
instruction concerning use
of the appliance in a safe
way and understand the
hazards involved. Child
shall not play with the
appliance. Cleaning and
maintenance shall not be
made by children without
supervision.
Do not block the air inlet
and outlet, e.g. by placing
items on the air outlet or
in front of the air inlet.
•
Make sure that foreign
objects do not fall into the
appliance through the air
outlet.
Standard WiFi interface
based on 802.11b/g/n at
2.4 GHz with a maximum
output power of 31.62 mW
EIRP.
Caution
• This appliance is not
a substitute for proper
ventilation, regular
vacuum cleaning, or use
of an extractor hood or
fan while cooking.
• If the power socket used
to power the appliance
has poor connections,
the plug of the appliance
becomes hot. Make
sure that you plug the
appliance into a properly
connected power socket.
• Always place and use the
appliance on a dry, stable,
level, and horizontal
surface.
• Leave at least 20cm free
space behind and on both
sides of the appliance
and leave at least 30cm
free space above the
appliance.
•
•
•
•
•
•
•
Do not place anything on
top of the appliance.
Do not sit or stand on
the appliance. Sitting or
standing on the appliance
may lead to potential
injury.
Do not place the
appliance directly below
an air conditioner to
prevent condensation
from dripping onto the
appliance.
Make sure all filters
are properly installed
before you switch on the
appliance.
Only use the original
Philips filters specially
intended for this
appliance. Do not use any
other filters.
Combustion of the filter
may cause inreversible
human hazard and/or
jeopardize other lives . Do
not use the filter as fuel or
for similar purpose.
Avoid knocking against
the appliance (the air inlet
and outlet in particular)
with hard objects.
EN
3
Eng lis h
•
•
•
•
•
•
•
4
Always lift or move the
appliance by the handle
on top of the appliance.
Do not insert your fingers
or objects into the air
outlet or the air inlet to
prevent physical injury
or malfunctioning of the
appliance.
Do not use this appliance
when you have used
indoor smoke-type insect
repellents or in places
with oily residues, burning
incense, or chemical
fumes.
Do not use the appliance
near gas appliances,
heating devices or
fireplaces.
Always unplug the
appliance after use
and before cleaning
or carrying out other
maintenance.
Do not use the appliance
in a room with major
temperature changes,
as this may cause
condensation inside the
appliance.
EN
•
•
•
•
•
•
To prevent interference,
place the appliance at
least 2 meters away from
electrical appliances that
use airborne radio waves
such as TVs, radios, and
radio-controlled clocks.
The appliance is only
intended for household
use under normal
operating conditions.
Do not use the appliance
in wet surroundings or in
surroundings with high
ambient temperatures,
such as the bathroom,
toilet, or kitchen.
The appliance does
not remove carbon
monoxide (CO) or radon
(Rn). It cannot be used
as a safety device in
case of accidents with
combustion processes
and hazardous chemicals.
If you need to move the
appliance, disconnect the
appliance from the power
supply first.
Do not move the
appliance by pulling its
power cord.
Congratulations on your purchase, and
welcome to Philips!
To fully benefit from the support that
Philips offers, register your product at
www.philips.com/welcome.
Product overview (fig.a)
A
Control panel
B
Air quality light
C
Air quality sensors
D
NanoProtect Pro S3 filter (FY3137)*
E
Pre-filter
F
Front panel
Controls overview (fig.b)
G
On/Off button
H
Light on/off button
I
Auto mode button
J
Display screen
K
Fan speed button
L
Timer button
M
Reset/Child lock button
3 Getting started
Eng lis h
2 Your air purifier
Installing filters
Note
•• Make sure the air purifier is unplugged
from the electrical outlet before
installing the filters.
•• Make sure the side of the filter with the
tag is pointing towards you.
1
2
3
4
5
Pull the bottom part of the front
panel to remove it from the
appliance (fig.c).
Press the two clips down and pull
the pre-filter towards you (fig.d).
Remove all filters (fig.e).
Remove all packaging materials of
the air purification filters (fig.f).
Put the unpacked air purification
filters back into the appliance
(fig.g).
6 Put the pre-filter back into the
appliance (fig.h).
Note
•• Make sure that the side with the two
clips is pointing towards you, and that
all hooks of the pre-filter are properly
attached to the purifier.
7
8
To reattach the front panel, mount
the panel onto the top of the
appliance first (1). Then, gently push
the panel against the body of the
appliance (2) (fig.i).
Wash your hands thoroughly after
installing filters.
EN
5
Note
Wi-Fi setup
Setting up the Wi-Fi connection
for the first time
1
2
3
4
5
Download and install the 'Air
Matters' app from the App Store or
Google Play.
Put the plug of the air purifier in the
power socket and touch
to turn
on the air purifier.
»» The Wi-Fi indicator
blinks
orange for the first time.
Make sure that your mobile device
is successfully connected to your
Wi-Fi network.
Launch the 'Air Matters' app and
follow the onscreen instructions
to connect the air purifier to your
network.
After the successful pairing and
connection, the Wi-Fi indicator
will light up white. If pairing
is not successful, consult the
troubleshooting section, or the
help section in the 'Air Matters'
app for extensive and up-to-date
troubleshooting tips.
•• This instruction is only valid when the
air purifier is being set up for the first
time. If the network has changed or the
setup needs to be performed again,
consult section “Setting up the Wi-Fi
connection when the network has
changed” on page 6.
•• If you want to connect more than one
air purifier to your smart device, you
have to do this successively. Complete
the set up of one air purifier before you
turn on the other air purifier.
•• Make sure that the distance between
your mobile device and the air
purifier is less than 10 m without any
obstructions.
•• This app supports the latest versions of
Android and iOS. Please check
www.philips.com/purifier-compatibility
for the latest update of supported
operating systems and devices.
Setting up the Wi-Fi connection
when the network has changed
Note
•• This applies when the default network
to which your purifier is connected has
changed.
1
2
3
6
EN
Put the plug of the air purifier in the
power socket and touch
to turn
on the air purifier.
Touch
and
simultaneously for
3 seconds until you hear a beep.
»» The air purifier goes to pairing
mode.
»» The Wi-Fi indicator
blinks
orange.
Follow the steps 4-5 in "Setting up
the Wi-Fi connection for the first
time" section.
Understanding the air
quality light
PM2.5 Air quality
level
light color
Air quality
level
≤12
Blue
Good
13-35
Blue-Purple
Fair
36-55
Purple-Red
Poor
>55
Red
Very poor
The air quality light automatically goes
on when the appliance is switched on,
and lights up all colors in sequence.
In a short time the air quality sensors
select the color that corresponds to the
ambient air quality.
Switching on and off
1
2
Put the plug of the appliance in the
power socket.
Touch
to switch on the
appliance (fig.j).
»» The appliance operates under
the auto mode by default.
»» After measuring the air quality
for a short time, the air quality
sensor automatically selects the
color of the air quality light.
Note
Eng lis h
4 Using the
appliance
•• After the appliance is switched off by
the on/off button
, if the plug is still
in the power socket, the appliance will
operate under the previous settings
when it is switched on again.
Changing the Auto mode
setting
You can choose the Pollution mode
( ), the Allergen mode ( ) and the
Bacteria/Virus mode ( ).
Pollution mode
The specially designed pollution
mode can effectively remove airborne
pollutants such as PM2.5.
• Touch the Auto mode button
to
select the Pollution mode (fig.l).
»» Auto(A) and
display on the
screen.
Allergen mode
The specially designed Allergen mode
can effectively remove common
allergens such as pollen and pet dander.
• Touch the Auto mode button
to
select the Allergen mode (fig.m).
»» Auto(A) and
display on the
screen.
»» After measuring the particle
matters in the air, the
icon and the PM2.5 level are
displayed on the screen. (fig.k).
3
Touch and hold
for 3 seconds to
switch off the appliance.
EN
7
Bacteria/Virus mode
The specially designed Bacteria & Virus
mode can effectively remove bacteria
& viruses such as staphylococcus albus
and H1N1.
• Touch the Auto mode button
to
select the Bacteria & Virus mode
(fig.n).
»» Auto(A) and
display on the
screen.
Changing the fan speed
There are several fan speeds available.
You can choose the sleep mode (
),
turbo mode( ) and speed 1, 2, or 3.
Setting the timer
With the timer, you can let the
appliance operate for a set number of
hours. When the set time has elapsed,
the appliance will automatically switch
off.
• Touch the timer button
repeatedly to choose the number
of hours you want the appliance to
operate (fig.r).
»» The timer is available from 1 to
12 hours.
To deactivate the timer, touch the timer
button
repeatedly until
displays
on the screen.
Sleep (SL)
Setting the child lock
In sleep mode, the appliance operates
quietly under speed 1. One minute into
the sleep mode, the power and light
on/off indicators are dimmed, and all
the other lights are off.
1
»» When the child lock is on,
all the other buttons are not
responsive.
• Touch the fan speed button
to
select the sleep mode (
) (fig.o).
Manual
• Touch the fan speed button
repeatedly to select the fan speed
you need (fig.p).
Turbo (t)
In turbo mode, the appliance operates
under the highest speed.
• Touch the fan speed button
to
select the turbo mode ( ) (fig.q).
8
EN
Touch and hold the child lock
button
for 3 seconds to activate
child lock (fig.s).
»»
displays on the screen.
2
Touch and hold the child lock
button
for 3 seconds again to
deactivate child lock (fig.t).
»»
disappears from the screen.
With the light on/off button, you can
switch on or off the air quality light,
the display screen and the function
indicators if needed.
1
2
Touch the light on/off button
once, the air quality light, the
display screen and the function
indicators will go off.
Touch the light on/off button
again, all lights will be on again.
Switching the display
mode
The air purifier has two display modes:
Indoor Allergen Index (IAI) display
and PM2.5 display mode. When in IAI
mode, the display shows a number
between 1-12 to indicate the level of
airbone allergens. In PM2.5 mode the
display shows the particulate matter 2.5
concentration in the air in µg/m3.
Note
•• The air purifier operates in PM2.5
display mode by default.
1
2
Touch the light dimming button
for 3 seconds to switch to IAI
display mode (fig.u).
»» The actual IAI level displays on
the screen.
Touch the light dimming button
for 3 seconds again to switch back
to PM2.5 display mode (fig.v).
»» The PM2.5 level displays on the
screen.
5Cleaning
Eng lis h
Using the light on/off
function
Note
•• Always unplug the appliance before
cleaning.
•• Never immerse the appliance in water
or any other liquid.
•• Never use abrasive, aggressive, or
flammable cleaning agents such as
bleach or alcohol to clean any part of
the appliance.
•• Only the pre-filter is washable. The air
purification filter is not washable nor
vacuum cleanable.
Cleaning schedule
Frequency
Cleaning method
When necessary
Wipe the surface
of the appliance
with a soft dry
cloth
When F0
displays on the
screen
Clean the prefilter
Every two
months
Clean the air
quality sensors
Cleaning the body of the
appliance
Regularly clean the inside and outside
of the appliance to prevent dust from
collecting.
1
2
Wipe away dust with a soft dry cloth
from the body of the appliance.
Clean the air outlet with a soft dry
cloth.
EN
9
Cleaning the air quality
sensor
Cleaning the pre-filter
Clean the air quality sensor every
2 months for optimal functioning of the
purifier. Clean them more frequently
if you use the purifier in a dusty
environment.
1
Note
•• When the humidity level in the
room is very high, it is possible that
condensation develops on the air
quality sensor. As a result, the air
quality light may indicate that the air
quality is bad even though it is good.
In this case you have to clean the
air quality sensor or use one of the
manual speed settings.
1
2
3
4
5
Clean the air quality sensor inlet
and outlet with a soft brush (fig.w).
Open the air quality sensor cover
(fig.x).
Clean the air quality sensor, the
dust inlet and the dust outlet with
a lightly moistened cotton swab
(fig.y).
Dry them with a dry cotton swab.
Reattach the air quality sensor
cover (fig.z).
Clean the pre-filter when F0 is displayed
on the screen(fig.{).
2
3
4
EN
Press the two clips down and pull
the pre-filter towards you (fig.d).
Wash the pre-filter under a running
tap. If the pre-filter is very dirty, use
a soft brush to brush away the dust
(fig.|).
Air dry the pre-filter.
Note
•• Make sure that the pre-filter is
completely dry. If it is still wet, bacteria
may multiply in it and shorten the
lifetime of the pre-filter.
5
Put the pre-filter back into the
appliance (fig.h).
Note
•• Make sure that the side with the two
clips is pointing towards you, and that
all hooks of the pre-filter are properly
attached to the purifier.
6 To reattach the front panel, mount
7
10
Pull the bottom part of the front
panel to remove it from the
appliance (fig.c).
the panel onto the top of the
appliance first (1). Then, gently push
the panel against the body of the
appliance (2) (fig.i).
Touch and hold the reset button
for 3 seconds to reset the pre-filter
cleaning time (fig.}).
Understanding the
healthy air protect lock
This air purifier is equipped with a
filter replacement indicator to make
sure that the air purification filter is in
optimal condition when the air purifier
is operating. When the filters need to be
replaced, the filter code displays on the
screen (see Filter alert chart).
If the filters are not replaced in 14 days,
the air purifier will stop operating and
automatically lock to protect the air
quality in the room. Replace the filters
as soon as possible according to the
filter code.
Replacing the filters
Note
•• The air purification filters are not
washable nor vacuum cleanable.
•• Always turn off the air purifier and
unplug from the electrical outlet
before replacing the filters.
•• Do not clean the filters with a vacuum
cleaner.
•• If the pre-filter is damaged, worn or
broken, do not use. Visit
www.philips.com/support or contact
the Consumer Care Center in your
country.
Filter alert chart
Filter alert light
status
Follow this
A3 displays on the
screen
Replace
NanoProtect Pro
S3 filter (FY3137)
1
Eng lis h
6 Replacing the
filter
Take out the used air filters
according to the filter code
displayed on the screen. Discard
used filters (fig.~).
Note
•• Do not touch the pleated filter surface,
or smell the filter as it has collected
pollutants from the air.
2
3
4
5
Remove all packaging material of
the new filters (fig.f).
Place the new filters into the
appliance (fig.g).
Put the plug of the appliance in the
wall outlet.
Touch and hold the reset button
for 3 seconds to reset the filter
lifetime counter (fig.).
Note
•• Wash your hands after changing the
filters.
EN
11
Filter type change
1
2
3
Touch
and
for 3 seconds to
enter the filter type change mode
(fig.€).
»» Code (A3) of the NanoProtect
filter Series 3 displays on the
screen.
Touch
to select the filter code of
the new filter you will use (fig.).
Touch and hold
for 3 seconds to
confirm the filter code of the new
filter (fig.‚).
Note
•• After you have selected the filter code
of the new filter using the
button,
if you do not touch any other buttons
in 10 seconds, the appliance will
automatically confirm the filter code of
the new filter.
4
12
"--" displays on the screen after the
new filter code is confirmed (fig.ƒ).
»» If you do not have a second
filter to use in the appliance,
touch and hold
for
3 seconds to confirm and exit
the filter type change mode
(fig.„).
EN
This chapter summarizes the most common problems you could encounter with the
appliance. If you are unable to solve the problem with the information below, contact
the Consumer Care Center in your country.
Problem
The appliance
does not work
even though it is
plugged in..
The appliance
does not work
even though it is
switched on.
The airflow that
comes out of
the air outlet
is significantly
weaker than
before.
The air quality
does not improve,
even though the
appliance has
been operating for
a long time.
The color of the air
quality light always
stays the same.
Possible solution
••
••
Check if the front cover is properly installed.
The filter replacement code has been displaying on the
screen but you have not replaced the corresponding filter
yet. The appliance will be locked if you keep using the
expired filter. In this case, replace the filter and reset the
filter lifetime counter.
••
••
Check if the packing materials for the fitlers are removed.
The appliance is working but the buttons are not
responsive. Check if the child lock is on.
The filter replacement code has been on continuously but
you have not replaced the corresponding filter, and the
appliance is now locked. In this case, replace the filter and
reset the filter lifetime counter.
••
••
The pre-filter is dirty. Clean the pre-filter (see chapter
"Cleaning").
••
One of the filters has not been placed in the appliance.
Make sure that all filters are properly installed in the
following order, starting with the innermost filter:
1) NanoProtect Pro S3 filter (FY3137); 2) pre-filter
The air quality sensor is wet. The humidity level in your
room is high and causes condensation. Make sure that the
air quality sensor is clean and dry (see chapter "Cleaning").
••
••
The air quality sensor is dirty. Clean the air quality sensor
(see chapter "Cleaning").
EN
13
Eng lis h
7Troubleshooting
Problem
Possible solution
••
The appliance
produces a strange
smell.
The appliance is
extra loud.
The appliance still
indicates that I
need to replace a
filter, but I already
did.
Error codes "E1",
or "E2" displays on
the screen.
••
••
If the appliance is too loud, you can change the fan speed
to a lower fan speed level. When using the appliance in a
bedroom at night, choose the sleep mode.
••
Perhaps you did not reset the filter lifetime counter. Plug
in the appliance, touch to switch on the appliance, and
touch and hold the reset button
for 3 seconds.
••
The appliance has malfunctions. Contact the Consumer
Care Center in your country.
Which App I should ••
download?
14
EN
The filter may produce smell after being used for a
while because of the absorption of indoor gases. It’s
recommended that you reactivate the filter by putting it in
direct sunlight for repeated use. If odor still exists, replace
the filter.
If the air purifier produces a burnt odor, switch OFF and
unplug from the electrical outlet. Contact Consumer Care
Center in your country.
Please download and install the 'Air Matters' app from the
App Store or Google Play.
Possible solution
••
••
••
••
The Wi-Fi setup is
not successful.
••
••
••
••
••
If the router your purifier is connected to is dual – band
and currently it is not connecting to a 2.4GHz network,
please switch to another band of the same router (2.4GHz)
and try to pair your purifier again. 5GHz networks are not
supported.
Web authentication networks are not supported.
Check if the purifier is within range of the Wi-Fi router. You
can try to locate the air purifier closer to the Wi-Fi router.
Check if the network name is correct. The network name is
case-sensitive.
Check if the Wi-Fi password is correct. The password is
case-sensitive.
Retry the setup with the instructions in section ‘Set up the
Wi-Fi connection when the network has changed’.
The Wi-Fi connectivity can be interrupted by electromagnetic
or other interferences. Keep the appliance away from other
electronic devices that may cause interferences.
Check if the mobile device is in airplane mode. Make sure
to have the airplane mode deactivated when connecting
to the Wi-Fi network.
Consult the help section in the App for extensive and upto-date troubleshooting tips.
EN
15
Eng lis h
Problem
8 Guarantee and
service
If you need information or if you have a
problem, please visit the Philips website
at www.philips.com or contact the
Philips Consumer Care Center in your
country (you find its phone number
in the worldwide guarantee leaflet). If
there is no Consumer Care Centre in
your country, go to your local Philips
dealer.
Order parts or
accessories
If you have to replace a part or want to
purchase an additional part, go to your
Philips dealer or visit www.philips.com/
support.
If you have problems obtaining the
parts, please contact the Philips
Consumer Care Center in your country
(you can find its phone number in the
worldwide guarantee leaflet).
9Notices
Electromagnetic fields
(EMF)
This Philips appliance complies with all
applicable standards and regulations
regarding exposure to electromagnetic
fields.
Compliance with EMF
Koninklijke Philips N.V. manufactures
and sells many products targeted at
consumers, which, like any electronic
apparatus, in general have the ability
to emit and receive electromagnetic
signals.
One of Philips' leading Business
Principles is to take all necessary health
and safety measures for our products,
to comply with all applicable legal
requirements and to stay well within the
EMF standards applicable at the time of
producing the products.
Philips is committed to develop,
produce and market products that
cause no adverse health effects. Philips
confirms that if its products are handled
properly for their intended use, they
are safe to use according to scientific
evidence available today.
Philips plays an active role in the
development of international EMF
and safety standards, enabling Philips
to anticipate further developments in
standardization for early integration in
its products.
16
EN
Eng lis h
Recycling
Do not throw away the product with
the normal household waste at the
end of its life, but hand it in at an
official collection point for recycling.
By doing this, you help to preserve the
environment.
Follow your country's rules for the
separate collection of electrical and
electronic products. Correct disposal
helps prevent negative consequences
for the environment and human health.
Software
App Store is a service mark of Apple Inc.
Google Play is a trademark of Google
Inc.
This Philips appliance and Air Matters
app applied multiple open source
softwares, copies of open source
software license text used in this
product can be derived from website:
www.philips.com/purifier-compatibility.
EN
17
1 重要事項
安全
2 您的空氣淨化器
產品簡介 (圖 a)
控制鍵概覽(圖 b)
3 使用入門
安裝過濾網
Wi-Fi 設定
4 使用本產品
瞭解空氣質素燈
開機與關機
更改自動模式設定
改變風扇速度
設定定時功能
設定兒童安全鎖
使用光源開啟/關閉功能
切換顯示模式
5 清潔
清潔時間表
清潔本產品機身
清潔空氣質素感應器
清潔預過濾網
6 更換濾網
了解清新空氣保護鎖
更換過濾網
濾網類型更改
20
20
22
22
22
22
22
23
7 疑難排解
29
8 保障及服務
31
31
訂購零件或配件
9 注意
31
31
31
31
電磁場(EMF)
環保
軟件
24
24
24
24
25
25
25
25
25
26
26
26
26
27
27
27
27
28
使用環保紙張。感謝您為保護森林作出的貢獻。
ZH-T
19
繁體中文
目錄
1
重要事項
安全
•
使用本產品前請先閱讀本用戶手冊,並保
管以作將來參考。
危險事項
• 請勿讓水或任何液體或易燃
清潔劑進入此產品,以避免
觸電和/或火災的危險。
• 請勿用水或任何液體或(易
燃)清潔劑清潔此產品,以
避免觸電和/或火災的危險。
• 請勿在本產品周圍噴射殺蟲
劑或芳香劑等易燃物品。
警告
• 在連接本產品前,請檢查產
品註明的指示電壓與當地電
源電壓是否對應。
• 如果電源軟線損壞,為避免
危險,必須由製造廠或其維
修部或類似的專職人員來更
換。
• 若插頭、電線或產品本身已
受損,請勿使用。
• 此產品可供八歲及以上兒
童,體能、感官或心智能力
低下人仕,或缺乏知識及經
驗人仕使用,如該等人仕已
就使用本產品給予監督或有
關安全使用本產品的指導及
明白本產品的使用所涉及的
20
ZH-T
•
•
危險。請勿讓孩童將本產品
當成玩具。兒童不應於沒有
監督情況下對產品進行清潔
及維護。
請勿阻塞進氣口和排氣口,
例如在排氣口上面或進氣口
前面放置物件。
確保異物不會通過排氣口掉
入裝置內部。
根據 2.4 GHz 802.11b/g/n,
最大輸出功率 31.62 mW
EIRP 的標準 WiFi 界面。
注意
• 本產品並不是適當通風設
備、正規吸塵器或煮食時
使用的抽油煙機或風扇的
代替品。
• 若為本產品提供電力的電源
插座沒有妥善連接,本產品
的插頭便會發熱。請確保您
已妥善連接電源插座。
• 在乾燥、穩定、平滑和水平
表面上使用產品。
• 在本產品的後面和兩側至少
留出 20 厘米的自由空間,
本產品上方至少留出 30 厘
米空間。
• 請勿在裝置上放置任何
物品。
• 請勿坐或站立在裝置上。坐
在或站立在裝置上可能會導
致受傷。
•
•
•
•
•
•
•
•
•
•
•
請勿在冷氣機正下方放置
產品,以避免冷凝滴水到
產品上。
在開啟產品前,確保已正確
安裝所有濾網。
僅使用專門針對本產品的原
裝 Philips 濾網。請勿使用
任何其他濾網。
燃燒過濾器可能造成無可挽
救對人類的危害及/或危及
他人生命。不要使用濾網作
為燃料或類似用途。
避免以硬物碰撞產品 (尤其
是產品的通風口和排氣口)。
請使用裝置頂部的手柄來提
起或移動裝置。
請勿將您的手指或其他物件
放入通風口或排氣口,以免
造成身體傷害或產品故障。
若您使用室內煙型驅蚊劑,
或該地方有油跡、香火或化
學煙霧,請勿使用本產品。
請勿在煤氣用具、暖氣設備
或壁爐旁邊使用本產品。
使用後及清潔或進行其他保
養前,務必拔除本產品的插
頭。
請勿在溫度變化較大的房間
內使用本產品,這可能導致
產品內產生冷凝物。
為了防止干擾,請與使用空
中無線電波的電器如電視
機、收音機及收音機鬧鐘距
離 2 米的地方使用本產品。
•
•
•
•
•
本產品只適合一般操作環境
下的家居使用。
請勿在洗手間或廚房等
濕潤環境或高溫環境使用
本產品。
本產品不會去除一氧化碳
(CO) 或氡 (Rn)。在發生燃燒
過程和危險化學物質的事故
中,不能將本產品作為安全
裝置使用。
如果您需要移動本產品,請
先拔除其電源供應。
不要拉扯電源線來移動
裝置。
ZH-T
21
繁體中文
•
2
您的空氣淨化器
感謝您購買 Philips 產品,歡迎來到
Philips 世界!
要享受 Philips 為您提供的全面支援,請在
以下網站 www.philips.com/welcome
註冊您的產品。
產品簡介 (圖 a)
A
控制面板
B
空氣質素燈
C
空氣質素感應器
D
NanoProtect Pro S3 濾網
(FY3137)*
E
預過濾網
F
前面板
3 使用入門
安裝過濾網
提示
• 安裝濾網前,請確保空氣淨化器已經從電
源插座拔除。
• 確保濾網有標籤的一面是向著您。
1
2
3
4
5
6
控制鍵概覽(圖 b)
G
開/關按鈕
H
光源開/關按鈕
I
自動模式按鈕
J
顯示屏幕
K
風扇速度按鈕
L
定時功能按鈕
M
重設/兒童安全鎖按鈕
22
ZH-T
拉出前面板的底部,將濾網從裝置中取
出(圖 c)。
向下按兩個夾子,然後將預過濾網拉向
自己(圖 d)。
移除所有濾網(圖 e)。
移除空氣淨化濾網的所有包裝物料
(圖 f)。
將拆除包裝的空氣淨化濾網放回裝置中
(圖 g)。
將預過濾網放回裝置中(圖 h)。
提示
• 確保有兩個夾的一邊正向著您,且所有預
過濾網的鉤已妥善連接本產品。
7
8
要重新連接前面板塊,先將板塊固定於
本產品頂部 (1)。然後輕輕將面板安裝
於本產品的機身上(2)(圖 i)。
安裝濾網後,必須徹底洗淨雙手。
網絡改變後設定 Wi-Fi 連線
提示
首次設定 Wi-Fi 連線
1
從 App Store 或 Google Play 下載並
安裝「在意空氣」應用程式。
• 本提示只在空氣淨化器已連接的預設網絡
改變時適用。
1
2
2
3
4
5
將空氣淨化器的插頭插入電源插座,
輕按
以啟動空氣淨化器。
» Wi-Fi 指示燈
首次閃爍橙色
燈光。
3
將空氣淨化器的插頭插入電源插座,
輕按
以啟動空氣淨化器。
3 秒,直至聽到
和
同時按下
「嗶」聲為止。
» 空氣淨化器進入配對模式。
閃爍橙色燈光。
» Wi-Fi 指示燈
請按照「首次設定 Wi-Fi 連線」部分的
步驟 4-5 操作。
請確保流動裝置成功連接至 Wi-Fi
網絡。
啟動「在意空氣」應用程式,並根據
畫面指示,將空氣淨化器連接至您的
網絡。
成功配對並連接後,Wi-Fi 指示燈
便會閃爍白色燈光。如未能成功配對,
請參閱疑難排解部分,或「在意空氣」
應用程式中的說明部分,
以獲取最新的詳細疑難排解貼士。
提示
• 本指示僅適用於首次設定空氣淨化器。
如網絡有變或需要重新設定,請參閱第
23 頁的「網絡改變後設定 Wi-Fi 連線」
部分。
• 如您要將多於一部空氣淨化器連接至智能
裝置,您必須逐一連接。啟動另一部空
氣淨化器前,請完成設定當前的空氣淨
化器。
• 請確保流動裝置和空氣淨化器的距離在
10 米以內,而且沒有任何障礙物。
• 本應用程式支援最新版本的 Android 和
iOS。請查閱 www.philips.com/purifiercompatibility,以了解支援的作業系統和
裝置的最新資料。
ZH-T
23
繁體中文
Wi-Fi 設定
4 使用本產品
更改自動模式設定
您可以選擇過濾污染模式( )、過濾
致敏原模式( )及過濾細菌/病毒模式
( )。
瞭解空氣質素燈
PM2.5 空氣質素指示
水平
燈的顏色
空氣質素水平
過濾污染模式
≤12
藍色
良好
特別設計的過濾污染模式可以有效消除空
氣中的污染物,如 PM2.5。
13-35
藍紫色
一般
36-55
紫紅色
差
>55
紅色
非常差
開啟產品時,空氣質素燈將自動亮起,
並順序顯示所有顏色。片刻之後,空氣
質素感應器將選擇與環境空氣質素相符的
顏色。
•
過濾致敏原模式
特別設計的過濾致敏原模式能有效去除常
見的過敏原,如花粉及寵物毛屑。
•
開機與關機
1
2
3
將產品的插頭插入電源插座。
點按自動模式按鈕
,選擇過濾致敏
原模式(圖 m)。
» Auto(自動)(A)及
將會顯
示在螢幕上。
點按
開啟裝置(圖 j)。
» 裝置默認以自動模式運行。
過濾細菌/病毒模式
» 快速測量空氣質素後,空氣質素感
應器將自動選擇適當的空氣質素燈
的顏色。
特別設計的過濾細菌/病毒模式可以有效去
除細菌和病毒,如表皮葡萄球菌和 H1N1 流
感病毒。
» 測量空氣中的粒子質素後,螢幕上
會顯示
圖示和 PM2.5 水平。
(圖 k)。
•
按住
3 秒關閉產品。
提示
• 透過開/關按鈕關閉本產品後,
如果
插頭仍插在電源插座中,則再次開啟本產
品時,本產品將根據上一次的設定恢復
工作。
24
點按自動模式按鈕
,選擇過濾污染
模式(圖 l)。
» Auto(自動)(A)及
將會顯
示在螢幕上。
ZH-T
點按自動模式按鈕
,選擇過濾細菌/
病毒模式(圖 n)。
» Auto(自動)(A)及
將會顯
示在螢幕上。
改變風扇速度
設定兒童安全鎖
設有多個風扇速度 您可以選擇休眠模式
(
)、加速模式( )及速度 1、2 或
3 的設定。
1
在休眠模式中,產品會安靜地運行速度 1。
進入睡眠模式一分鐘後,電源和開/關指示
燈會變暗,其他所有燈都會熄滅。
按下風扇速度按鈕
以選擇休眠模式
(
) (圖 o)。
手動模式
•
重複按下風扇速度按鈕
以選擇您所
需的風扇速度(圖 p)。
加速模式 (t)
在加速模式中,產品會以最高的速度運行。
•
按下風扇速度按鈕
( )(圖 q)。
透過光源開啟/關閉按鈕,您可以開啟或關
閉空氣質素燈、顯示畫面及功能指示燈。
1
2
輕按一下光源開啟/關閉按鈕 ,即
可關閉空氣質素燈、顯示畫面及功能
指示燈。
再次按下光源開啟/關閉按鈕
燈將會再次亮起。
,所有
切換顯示模式
透過定時功能,您可以讓本產品在設定時
間內運作。設定時間過去之後,本產品便
會自動關閉。
重複按定時按鈕
選擇本產品運作的
小時數 (圖 r)。
» 定時功能的選擇為 1 至 12 小時。
要取消計時功能,重複按下定時按鈕
直至
顯示在螢幕上。
再次按住兒童安全鎖按鈕 3 秒,關
閉兒童安全鎖(圖 t)。
»
將會從屏幕消失。
使用光源開啟/關閉功能
以選擇加速模式
設定定時功能
•
2
,
空氣淨化器設有兩種顯示模式:室內致敏
原指數(IAI)顯示和 PM2.5 顯示模式。室
內致敏原指數模式以數字 1-12 顯示空氣中
致敏原的水平。PM2.5 模式顯示空氣內的
PM2.5 懸浮微粒濃度(單位為 μg/m3)。
提示
• 空氣淨化器默認以 PM2.5 顯示模式運行。
1
2
3 秒,以切換至
按下調暗燈光按鈕
室內致敏原指數(IAI)顯示模式
(圖 u)。
» 屏幕顯示實際的室內致敏原指數。
3 秒,以重
再次按下調暗燈光按鈕
新切換至 PM2.5 顯示模式(圖 v)。
» 屏幕顯示 PM2.5 水平。
ZH-T
25
繁體中文
» 當兒童安全鎖處於開啟狀態時,所
有其他按鈕均不響應。
休眠模式 (SL)
•
按住兒童安全鎖按鈕 3 秒,以啟動
兒童安全鎖(圖 s)。
»
將會顯示在屏幕上。
5 清潔
清潔空氣質素感應器
每兩個月清潔空氣質素感應器,讓本產品
發揮出最佳功能。若在多塵的地方使用本
淨化器,請更頻密清潔。
提示
• 每次清潔前請拔出裝置電源。
• 絕不將本產品侵入水中或任何其他
液體中。
• 請勿使用磨蝕性、侵略性或易燃清潔劑
(如漂白劑或酒精)清洗本產品的任何一
部分。
• 只有預過濾網是可清洗的。請勿清洗空氣
淨化器濾網,也切勿使用吸塵機清潔。
清潔時間表
頻率
清潔方法
必要時
用柔軟的乾布抹乾
淨本產品表面
當 F0 顯示在螢幕
上時
清洗預過濾網
每兩個月
清潔空氣質素感
應器
清潔本產品機身
請定時清潔本產品的內外,以避免本體內
積聚塵埃。
1
2
26
使用柔軟的乾布擦掉本體內的塵埃。
使用柔軟的乾布清潔排氣口。
ZH-T
提示
• 若房間內的濕度水平很高,空氣質素感應
器上可能會凝結水滴。因此,即使空氣質
素良好,空氣質素燈可能會顯示空氣質素
為差。在此情況下,您必須清潔空氣質素
感應器或使用其中一個手動設定。
1
2
3
4
5
使用柔軟毛刷清潔空氣質素感應器進氣
口及排氣口(圖 w)。
打開空氣質素感應器護蓋(圖 x)。
使用稍為濕潤的棉花棒清潔空氣質素感
應器和塵埃的出入口(圖 y)。
再以乾爽的棉花棒刷乾。
重新裝上空氣質量感應器護蓋
(圖 z)。
清潔預過濾網
6 更換濾網
1
2
3
4
拉出前面板的底部,將濾網從裝置中取
出(圖 c)。
了解清新空氣保護鎖
向下按兩個夾子,然後將預過濾網拉向
自己(圖 d)。
空氣淨化器設有過濾網替換指示燈,以確
保空氣淨化濾網在空氣淨化器運作時處於
良好狀態。需要更換濾網時,螢幕會顯示
濾網代碼(請參閱 濾網警示表)。
以自來水清洗預過濾網。如果預過濾網
內部十分骯髒,可用軟刷將塵埃刷走
(圖 |)。
吹乾預過濾網
如果 14 天內不更換濾網,空氣淨化器將會
停止運作並自動鎖上,以保障室內空氣質
素。根據濾網代碼指示,盡快更換過濾網。
提示
• 請確保預過濾網完全乾透。如果預過濾網
仍是濕的,細菌可能會滋生,縮短預過濾
網的壽命。
5
將預過濾網放回本產品內(圖 h)。
提示
• 確保有兩個夾的一邊正向著您,且所有預
過濾網的鉤已妥善連接本產品。
6
7
要重新連接前面板塊,先將板塊固定於
本產品頂部 (1)。然後輕輕將面板安裝
於本產品的機身上(2)(圖 i)。
按住重設按鈕 3 秒以重新設定預過
濾網清潔時間(圖 })。
更換過濾網
提示
• 請勿清洗空氣淨化器濾網,也切勿使用吸
塵機清潔。
• 更換濾網前,必須關閉空氣淨化器,並將
其從電源插座拔除。
• 請勿以吸塵機清潔濾網。
• 請勿使用已損壞的預過濾網。請瀏覽
www.philips.com/support 或聯絡你所在
國家/地區的客戶服務中心。
濾網警示表
過濾網警示燈狀態
按照此步驟進行
操作
當 A3 顯示在螢幕
上時
更換 NanoProtect
Pro S3 濾網
(FY3137)
1
根據螢幕上顯示的濾網代碼,取出舊的
空氣濾網。棄置舊的濾網(圖 ~)。
提示
• 請勿觸摸折叠的過濾網表面,或去聞過濾
網上的氣味,因為過濾網上聚集了空氣中
的污染物。
ZH-T
27
繁體中文
當螢幕顯示 F0 時,請清潔預過濾網
(圖 {)。
2
3
4
5
拆去新過濾網上的所有包裝物料
(圖 f)。
將新濾網放入裝置(圖 g)。
將裝置的插頭插入牆身插座。
按住重設按鈕 3 秒以重新設定濾網
使用時間。(圖 )。
提示
• 更換濾網後,必須洗手。
濾網類型更改
1
2
3
3 秒,進入濾網類
同時按下
及
型更改模式(圖 €)。
» NanoProtect 濾網 Series 3 的代
碼(A3)將會顯示在螢幕上。
按下
以選擇要使用的新濾網的濾網
代碼(圖 )。
3 秒以確定新濾網的濾網代碼
按住
(圖 ‚)。
提示
• 使用
按鈕選擇新濾網的濾網代碼後,
如果 10 秒內沒有按下其他任何按鈕,裝
置將自動確認新濾網的濾網代碼。
4
28
確定新的濾網代碼後,螢幕便會顯示
「--」(圖 ƒ)。
» 如裝置內沒有可用的第二個濾網,
3 秒以確認並離開濾網
請按住
類型更改模式(圖 „)。
ZH-T
7
疑難排解
問題
產品即使插上電源也
沒有正常運作。
產品即使啟動了也沒
有正常運作。
從排氣口排出的氣流
比以前顯著減弱。
即使本產品工作很
久,空氣質素也沒有
改善。
空氣質素光環的顏色
永遠保持同一顏色。
本產品發出一陣怪
味。
本產品噪音特別大。
產品仍然指示我需要
更換濾網,但是我已
經更換。
可行解決方案
•
•
請檢查前蓋是否已穩妥安裝好。
濾網替換代碼已經顯示在螢幕上,但您還沒有作出相應的濾網
替換動作。如果你持續使用過期的濾網,裝置將會鎖上。在這
情況,請更換該濾網並重設濾網使用時間。
•
•
•
請檢查濾網的包裝物料是否已經移除。
產品正在運作,但按鈕無響應。請查看兒童安全鎖是否有開啟
濾網替換代碼持續亮起,但你沒有作出相應的濾網替換動作,
裝置已經鎖上。在這情況,請更換該濾網並重設濾網使用時
間。
•
預過濾網處於骯髒的狀態。清潔預過濾網 (請查看「清潔」
一章)。
•
本產品的一個濾網沒有得到更換。請確認所有過濾網均按正確
次序裝上,由內至外為:
1) NanoProtect Pro S3 濾網(FY3137);2) 預過濾網
空氣質量感測器變濕。您的房間濕度高,導致水分凝結。確保
空氣質素感應器清潔和保持乾燥(請參閱「清潔」一章)。
•
•
空氣質量感測器處於骯髒的狀態。清潔空氣質素感應器(請參
閱「清潔」一章)。
•
由於吸收了室內氣體,濾網使用一段時間後可能會產生氣味。
建議您將濾網置於陽光下,然後再重新使用。如果仍有異味,
請更換濾網。
如空氣淨化器產生燒焦的氣味,請「關閉」電源,並將插頭從
電源插座拔出。請聯絡你所在國家/地區的客戶服務中心。
•
•
如果產品太吵,可調低風扇速度。如晚上在睡房使用裝置,選
擇睡眠模式。
•
可能你沒有重置濾網的使用時間。插入產品插頭,按
3 秒。
啟並按住重設按鈕
按鈕開
ZH-T
29
繁體中文
本章節總結一些您在本產品上最常見的問題。如果您按照以下資料仍未能解決問題,請聯絡
您的國家的 Philips 顧客服務中心。
問題
可行解決方案
螢幕將會顯示「E1」
或「E2」錯誤代碼。
•
裝置發生故障。請聯絡你所在國家/地區的客戶服務中心。
•
請從 App Store 或 Google Play 下載並安裝「在意空氣」應用
程式。
•
如空氣淨化器連接至雙頻寬路由器,而現時並非連接至 2.4GHz
網絡,請切換至同一路由器的另一頻寬(2.4GHz),然後再嘗
試配對空氣淨化器。裝置不支援 5GHz 網絡。
裝置不支援網上驗證網絡。
請檢查空氣淨化器是否在 Wi-Fi 路由器的有效範圍以內。您可
以嘗試將空氣淨化器移近 Wi-Fi 路由器。
請檢查網絡名稱是否正確。網絡名稱有大小寫之分。
請檢查 Wi-Fi 密碼是否正確。密碼有大小寫之分。
根據「網絡改變後設定 Wi-Fi 連線」部分的指示,嘗試重新
設定。
產品的 Wi-Fi 連接可能被電磁場或其他干擾中斷。將裝置遠離
可能會造成干擾的其他電子設備。
請檢查流動裝置是否處於飛行模式。連接至 Wi-Fi 網絡時,
請確保停用飛行模式。
請參閱應用程式中的說明部分,以獲取最新的詳細疑難排解
貼士。
我應該下載哪一個應
用程式?
•
•
未能成功設定
Wi-Fi。
•
•
•
•
•
•
30
ZH-T
如果您需要資料或有疑問,請前往 Philips
網站 www.philips.com 或聯絡您的國家的
Philips 顧客服務中心(您會在全球保障小
冊子上找到其電話號碼)。如果您的國家
沒有顧客服務中心,請前往當地的 Philips
經銷商。
訂購零件或配件
如果您需要更換零件或想訂購額外配件,
請前往您的 Philips 經銷商或瀏覽
www.philips.com/support。
如果您索取有關零件時遇上問題,請聯絡您
的國家/地區 Philips 顧客服務中心(您可
在全球保障小冊子上找到其電話號碼)。
9 注意
電磁場(EMF)
這款 Philips 產品符合一切有關電磁場暴露
的適用安全標準及條例。
符合 EMF 標準
Koninklijke Philips N.V. 專為消費者製造及
銷售許多產品 (例如任何電器用品),而這些
產品都能發出與接收電磁訊號。
Philips 貫徹執行的一項主要商業準則是對
我們的產品採取所有必要的健康和安全措
施,遵循一切可行的法律規定,並在產品
生產期間嚴格遵守 EMF 標準。
Philips 致力於開發、生產及銷售對健康無
害的產品。Philips 確認如果產品在目標用
途中操作得當,根據當今權威科學論證,
將不會存在任何安全隱患。
Philips 在開發國際 EMF 和安全標準中扮
演著積極作用,有助其預見未來標準化的
發展趨勢以便盡早融入至產品中。
環保
請勿在本產品使用壽命結束後當作一般家
庭垃圾廢棄,應交給官方回收站作循環再
用。這樣做有助保護環境。
請遵守您的國家/地區回收電器和電子產品
的法則。正確處理廢棄產品有助避免對環
境和人體造成負面影響。
軟件
App Store 是 Apple Inc. 的服務標誌
Google Play 是 Google Inc. 的商標
本 Philips 裝置及在意空氣應用程式使用多
個開放源碼軟件,本產品使用的開放源碼
軟件許可證文本可以由
www.philips.com/purifier-compatibility
網站取得。
ZH-T
31
繁體中文
8 保障及服務
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement