Philips DVP3526/94 User manual

Philips DVP3526/94 User manual
Register your product and get support at
www.philips.com/welcome
EN User manual
DVP3526
1
Important
Safety and important notice
Trademark notice
4
4
4
2
Your DVD player
Playable media
Product overview
5
5
5
3
Connect
Connect audio/video cables
Optional audio connections
Connect USB flash drive
Connect power
6
6
7
7
7
4
Get started
Prepare the remote control
Find the TV input channel
Select a menu display language
Turn on progressive scan
7
7
8
8
8
5
Play
Play a disc
Play video
Play music
Play photo
Play from a USB flash drive
9
9
9
10
11
12
6
Other features
Create MP3 files
12
12
7
Adjust settings
General setup
Audio setup
Video setup
Preferences
13
13
13
14
15
8
Additional information
Update software
Care
Specifications
16
16
16
16
9
Troubleshooting
17
10 Glossary
English
Contents
18
EN
3
1 Important
Safety and important notice
Warning
• Risk of overheating! Never install the product in a
•
•
•
•
•
•
•
•
confined space. Always leave a space of at least 4 inches
around the product for ventilation. Ensure curtains or
other objects never cover the ventilation slots on the
product.
Never place the product, remote control or batteries
near naked flames or other heat sources, including direct
sunlight.
Avoid high temperature, moisture, water and dust.
This unit must not be exposed to dripping or splashing.
Never place any object or items that can damage this
unit (e.g., liquid filled objects, lighted candles).
Never place this product on other electrical equipment.
Keep away from this product during lightning storms.
Where the mains plug or an appliance coupler is used as
the disconnect device, the disconnect device shall remain
readily operable.
Visible and invisible laser radiation when open. Avoid
exposure to beam.
About Progressive Scan
Consumers should note that not all high definition
television sets are fully compatible with this product
and may cause artifacts to be displayed in the
picture. In case of 525 or 625 progressive scan
picture problems, it is recommended that the user
switch the connection to the ‘standard definition’
output. If there are questions regarding our TV set
compatibility with this model 525p and 625p DVD
player, please contact our customer service center.
Disposal of your old product and
batteries
Your product is designed and manufactured with
high quality materials and components, which can
be recycled and reused.
Never dispose of your product with other
household waste. Please inform yourself about the
local rules on the separate collection of electrical
and electronic products and batteries. The correct
disposal of these products helps prevent potentially
negative consequences on the environment and
human health.
Your product contains batteries, which cannot be
disposed of with normal household waste.
4
EN
Please inform yourself about the local rules on
separate collection of batteries. The correct
disposal of batteries helps prevent potentially
negative consequences on the environment and
human health.
Please visit www.recycle.philips.com for additional
information on a recycling center in your area.
Copyright notice
This item incorporates copy protection technology
that is protected by U.S. patents and other
intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are
prohibited.
CLASS 1
LASER PRODUCT
Trademark notice
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
The USB-IF Logos are trademarks of Universal
Serial Bus Implementers Forum, Inc.
‘DVD Video’ is a trademark of DVD Format/Logo
Licensing Corporation.
Congratulations on your purchase, and welcome to
Philips! To fully benefit from the support that Philips
offers, register your product at www.philips.com/
welcome.
Playable media
Remote control
English
2 Your DVD player
a
b
This product can play:
•
DVD-Video, DVD+R/+RW, DVD-R/-RW,
DVD+R/-R DL (Dual Layer), DVD-RW DL
•
Video CD/SVCD
•
Audio CD, CD-R/CD-RW
•
MP3 media, WMA media, JPEG files
r
c
d
Region codes
q
You can play discs with the following region codes.
DVD region code
Countries
p
e
India
f
o
n
g
Product overview
Main Unit
h
a
b cde f
a Disc compartment
i
m
j
l
b Display panel
c
•
d
•
e
•
f
•
k
(Open/Close)
Open or close the disc compartment.
(Play/Pause)
Start, pause or resume disc play.
(Standby/On)
Turn on the unit or switch to standby.
(USB) jack
Connect a USB flash drive.
a
•
Turn on the unit or switch to standby.
•
Open or close the disc compartment.
b
c DISC MENU
•
Access or exit the disc menu.
•
Switch to the disc mode.
EN
5
•
During a photo slideshow, switch
between the Fun Mode (color) and
Simple Mode (black and white).
For VCD and SVCD, turn on or off PBC
(playback control).
•
d
•
•
Navigate the menus.
Search fast-forward ( ) or fast-backward
( ).
Search slow-forward ( ) or slowbackward ( ).
•
e
BACK
Return to the previous display menu.
•
f
/
•
Skip to the previous or next title, chapter,
or track.
•
Switch to the USB mode.
g
3 Connect
Make the following connections to use this product.
Basic connections:
•
Video
•
Audio
Optional connections:
•
Route audio to other devices:
•
Digital amplifier/receiver
•
Analog stereo system
•
USB flash drive
Connect audio/video cables
•
•
h Numeric buttons
•
Select an item to play.
i SUBTITLE
•
Select a subtitle language on a disc.
j
•
•
Option 1: Connect to component video
jacks
ZOOM
Fit the piture display to the TV screen.
Zoom the picture in or out.
Pb
k VOLUME
•
Display the current volume level and use
( ) or ( ) navigation buttons to set the
volume level between 0 ~ 20.
l REPEAT/REPEAT A-B
•
Select or turn off repeat mode.
•
Repeat play for a specific section.
m AUDIO/CREATE MP3
•
Select an audio language or channel on
a disc.
•
Access the menu of creating MP3 files.
n
•
Stop play.
•
Start, pause or resume disc play.
o
p
INFO
•
For discs, access the play options or
display the current disc status.
•
For slideshows, display a thumbnail view
of photo files.
q OK
•
Confirm an entry or selection.
r SETUP
•
Access or exit the setup menu.
6
EN
Option 1: Connect to component video jacks
(for a standard TV or Progressive Scan TV).
Option 2: Connect to video (CVBS) jack (for a
standard TV).
Y
Pr
COMPONENT VIDEO OUT
1
2
Pr
Pb
Y
COMPONENT
VIDEO IN
Connect the component video cables (not
supplied) to:
•
the Y Pb Pr jacks on this product.
•
the COMPONENT VIDEO input jacks
on the TV.
Connect the audio cables (supplied) to:
•
the AUDIO OUT FRONT L/R jacks on
this product.
•
the audio input jacks on the TV.
Option 2: Connect to video (CVBS) jack
VIDEO IN
2
Connect a composite video cable (supplied)
to:
•
the TV OUT jack on this product.
•
the video input jack on the TV.
Connect the audio cables (supplied) to:
•
the AUDIO OUT FRONT L/R jacks on
this product.
•
the audio input jacks on the TV.
•
the audio input jacks on the TV.
Connect USB flash drive
English
1
Optional audio connections
Connect the audio from this product to other devices
to enhance sound.
1
Connect multi channel receiver
Connect a USB flash drive to the
this product.
jack on
Note
• This product can only play/view MP3, WMA, or JPEG
files that are stored on a USB flash drive.
button to access the content and play
the files.
• Press the
Connect power
Caution
• Risk of product damage! Ensure that the power supply
•
FRONT L
REAR L
CENTER
FRONT R
REAR R
SUBWOOFER
MULTICHANNEL
AUDIO IN
1
Connect the audio cables (not supplied) to:
•
the AUDIO OUT (FRONT L/R, REAR
L/R, CENTER and SUBWOOFER) jacks
on this product.
•
the audio input jacks on the device.
voltage corresponds to the voltage printed on the back
of the product.
Before connecting the AC power cord, ensure you have
completed all other connections.
Note
• The type plate is located on the back of the product.
1
Connect the AC power cable to the wall
socket.
» The product is ready to be set up for use.
Connect an analogue stereo system
AUDIO IN
4 Get started
Prepare the remote control
FRONT L
1
FRONT R
2
3
1
Connect the audio cables (supplied) to:
•
the AUDIO OUT FRONT L/R jacks on
this product.
Press and push the battery compartment to
slide it open (see “1” in the illustration).
Insert two AAA batteries with correct
polarity (+/-) as indicated.
Push and slide back the battery compartment
(see “3” in the illustration).
EN
7
Note
• If you are not going to use the remote control for a long
time, remove the batteries.
• Do not mix batteries (old and new or carbon and
•
alkaline, etc.).
Batteries contain chemical substances, so they should be
disposed of properly.
1
2
3
4
Find the TV input channel
1
2
Press to turn on this product.
Turn on the TV and switch to the video input
channel (refer to the TV user manual on how
to select the A/V input channel).
Select a menu display language
5
Turn on the TV to the correct viewing channel
for this product.
Press SETUP.
Press to select [Video Setup].
Select [Progressive] > [On], and then press
OK.
» A warning message is displayed.
To proceed, select [Ok] and then press OK.
» The progressive setup is complete.
Note
• If a blank/distorted screen is displayed, wait for 15
seconds for the auto recovery.
• If no picture is displayed, turn off the progressive scan
mode as follows:
1) Press to open the disc compartment.
2) Press the Numeric button ‘1’.
6
7
Press SETUP to exit the menu.
You can now turn on the progressive scan
mode on the TV (see the TV user manual).
Note
1
Press SETUP.
» [General Setup] menu is displayed.
2
3
Select [OSD Language], and then press .
Press
to select a language, and then press
OK.
Turn on progressive scan
Note
• To use the progressive scan feature, you must connect a
progressive scan TV with the component video jacks (see
“Connect” > “Connect audio/video cables” > “Option 1:
Connect to the component video jacks” for details).
8
EN
• During play, when the progressive scan mode is on for
both this product and the TV, distorted picture may
display. In this case, turn off the progressive scan feature
on both this product and the TV.
Button
Action
Start, pause or resume disc play.
Play a disc
Stop disc play.
,
Caution
,
• Do not place any objects other than discs into the disc
•
1
2
3
compartment.
Do not touch the disc optical lens inside the disc
compartment.
Press to open the disc compartment.
Insert a disc with its label facing up.
Press to close the disc compartment and
start disc play.
Note
• Check the types of discs supported (see “Your DVD
•
player” > “Playable media”).
If the password entry menu is displayed, enter the
password before you can play the locked or restricted
disc (see “Adjust settings” > “Preferences” > [Parental
Control]).
,
AUDIO/
CREATE
MP3
SUBTITLE
ZOOM
(Screen fit)
ZOOM
Play video
Note
INFO
• Some operations may not work with some discs. See the
Skip to a previous/next title or
chapter.
Search fast-backward or fastforward. Press repeatedly to change
the search speed.
Search slow-forward or slowbackward. Press repeatedly to
change the search speed.
For VCD/SVCD, slow-backward
search is not available.
Select an audio language or channel
available on a disc.
Select a subtitle language available
on a disc.
Fit the picture format to the TV
screen.
Press repeatedly until the image is
scaled to fit to the TV screen.
Toggle between screen aspect ratio
and different zoom factor.
To pan through the zoomed image,
press the Navigation buttons.
Access the play options and display
the current disc status.
information accompanying the disc for details.
Control video play
1 Play a title.
2 Use the remote control to control the play.
Access DVD menu
1 Press DISC MENU to access the disc root
2
menu.
Select a play option, then press OK.
•
In some menus, press the Numeric
buttons to input your selection.
Access VCD menu
The PBC (playback control) feature is available for
VCD/SVCD, which can display the contents menu
for you to select a play option. The PBC is on by
default in the factory.
Note
• See “Adjust settings” > “Preferences” > [PBC] on how
to turn PBC on or off.
1
Display the contents menu via one of the
following ways:
•
If PBC is on, load in a VCD/SVCD.
EN
9
English
5 Play
•
2
During play with PBC on, press
BACK.
Press the Numeric buttons to select a play
option, and then press OK to start play.
•
If PBC is turned off, it skips the menu
display and starts play from the first
track.
Repeat play for a specific section
1 To set the start point during play, press
REPEAT/REPEAT A-B repeatedly until
is
displayed.
To set the end point, press REPEAT/REPEAT
A-B again.
»
is displayed and the marked section
starts to play repeatedly.
» To cancel repeat play, press REPEAT/
REPEAT A-B again.
2
Preview disc contents
1 During play, press INFO.
» The disc status menu is displayed.
2
3
Select [Preview], and then press .
Select a preview option, and then press OK.
» A thumbnails preview screen is displayed.
•
To go to the next/previous preview
screen, select [Prev] or [Next], and then
press OK.
•
To start play, press OK at the selected
thumbnail picture.
Skip play to a specific time
1 During play, press INFO.
Note
• Only a section within a track/title can be marked for
repeat play.
Play music
Control a track
1 Play a track.
2 Use the remote control to control the play.
» The disc status menu is displayed.
2
3
Select an option for the current elapsed
playing time, and then press .
•
[TT Time] (title time)
•
[CH Time] (chapter time)
•
[Disc Time]
•
[Track Time]
Press the Numeric buttons to enter the time
to skip to, then press OK.
Button
Action
Start, pause or resume disc
play.
Stop disc play.
Skip to a previous/next
track.
Select an item to play.
,
Display play time
1 During play, press
INFO.
» The disc status menu is displayed.
2
Select [Time Disp.], and then press .
» The display options vary from disc type.
3
Select an option, and then press OK.
View DVD play from different angles
1 During play, press INFO.
» The disc status menu is displayed.
2
3
Select [Angle], and then press .
Press the Numeric buttons to change the
angle.
» Play changes to the selected angle.
Note
• Applicable only to discs that contain multi-angle scenes.
10
EN
,
Searches fast-backward
or fast-forward. Press
repeatedly to change the
search speed.
Quick skip play
This feature is only available for audio CDs.
1 During play, press INFO repeatedly to
select an option.
Action
Play photo
[Disc Go To]
Skip play to a specific time
within the disc.
Skip play to a specific time
within a track.
Skip play to a specific track
number.
Play photo as slideshow
[Track Go To]
[Select Track]
2
Press the numeric buttons to change the time/
number to skip to.
You can play JPEG photos (files with .jpeg or .jpg
extensions).
1 Insert a disc or USB flash drive that contains
the JPEG photos.
•
For USB, press
.
» Slideshow begins (for Kodak disc), or a
contents menu (for JPEG disc) is displayed.
2
Play MP3/WMA music
MP3/WMA is a type of highly compressed audio file
(files with .mp3, .wma extensions).
1 Insert a disc or USB that contains the MP3/
WMA music.
•
For USB, press
.
» A contents menu is displayed.
2
If play does not automatically start, select a
track to play.
•
To select another track/folder, press
, then press OK.
•
•
Note
• For disc recorded in multiple sessions, only the first
Note
session is played.
• For a WMA file that is protected by Digital Rights
Management (DRM), it cannot be played on this product.
• This product does not support MP3PRO audio format.
• For any special character that is present in the MP3 track
•
name (ID3) or album name, it might not be displayed
correctly on the screen because these characters are not
supported.
Folders/files that exceed the supported limit of this
product cannot be displayed or played.
Repeat play for a specific section
1 To set the start point during play, press
2
REPEAT/REPEAT A-B repeatedly until
is
displayed.
To set the end point, press REPEAT/REPEAT
A-B again.
»
is displayed and the marked section
starts to play repeatedly.
•
To cancel repeat play, press REPEAT/
REPEAT A-B again.
Select a photo, and then press OK to start
slideshow.
» For a photo recorded with the “exif ”
format, the display orientation is
automatically optimized.
To display photos in color (fun mode) or in
black and white (simple mode), press
DISC MENU.
To preview the photos in thumbnail, press
INFO.
•
To select a photo, press the Navigation
buttons.
•
To enlarge the selected photo and start
slideshow, press OK.
•
To return to the menu, press
BACK.
• It may require longer time to display the disc content
•
•
•
on the TV due to the large number of songs/photos
compiled onto one disc/USB flash drive.
If the JPEG photo is not recorded with an ‘exif ’ type
file, the actual thumbnail picture cannot be shown on
the screen. It is replaced by a ‘blue mountain’ thumbnail
picture.
This product can only display digital camera pictures
according to the JPEG-EXIF format, typically used by
almost all digital cameras. It cannot display Motion JPEG,
or pictures in formats other than JPEG, or sound clips
associated with pictures.
Folders/files that exceed the supported limit of this
product cannot be displayed or played.
Control photo play
1 Play a photo slideshow.
2 Use the remote control to control the play.
Note
• Only a section within a track/title can be marked for
repeat play.
EN
11
English
Display
Button
/
/
ZOOM
Action
Note
Rotate a photo anti-clockwise/
clockwise.
Rotate a photo horizontally/
vertically.
Zoom in or out of a photo.
Play pauses in zoom mode.
Stop a play.
• This product plays/views MP3, WMA or JPEG files that
are stored on a USB flash drive.
6 Other features
Create MP3 files
Play musical slideshow
Create a musical slideshow to play MP3/WMA
music files and JPEG photo files simultaneously.
Note
• To create a musical slideshow, you must store the MP3/
WMA and JPEG files on the same disc/USB flash drive.
1
2
3
Play MP3/WMA music.
Press
BACK to return to the main menu.
Navigate to the photo folder/album and press
OK to start slideshow play.
» Slideshow begins and continues till the end
of the photo folder or album.
» Audio continues to play until the end of
the disc.
•
To stop slideshow play, press .
•
To stop music play, press again.
With this product, you can convert audio CDs into
MP3 audio files. The created MP3 audio files are saved
in the USB flash drive.
1 Insert an audio CD.
2 Connect a USB flash drive to the
jack on
this product.
3 During disc play, press AUDIO/CREATE MP3.
» The MP3 creation menu is displayed.
4
Select [Yes] in the menu, and then press OK.
Create MP3
OPTIONS
Normal
Track01
04:14
Bitrate
128kbps
Track02
04:17
Yes
Track03
03:58
USB 1
Track04
04:51
Track05
03:53
Track06
04:09
Track07
04:38
CRT ID3
Device
SUMMARY
Press [OK] button
to change speed.
Play from a USB flash drive
TRACK
Speed
Start
Exit
Select all
Deselect all
Note
• This product plays/views MP3, WMA, or JPEG files that
5
are stored on a USB flash drive.
1
2
3
4
12
Connect a USB flash drive to the
this product.
Press the
button.
» A contents menu is displayed.
jack on
If play does not start automatically, select a file
to play.
•
For more information, see the chapters
“Play music”, “Play photo” and “Play
video” for details.
To stop play, press .
•
To switch to the disc mode, press the
button.
EN
Select a conversion option in the [OPTIONS]
panel, and then press OK repeatedly to select
an item.
Option
Description
[Speed]
[Bitrate]
Select a copying speed.
Select a quality level.
Higher bitrate for better sound
quality and bigger file size.
Copy track information into the
MP3 file.
The created files can only be saved
in a USB flash drive.
[CRT ID3]
[Device]
6
7
Press to access the [TRACK] panel.
Select an audio track, and then press OK.
•
To select another track, repeat step 7.
8
To select all tracks, select [Select all] in
the menu, and press OK.
•
To deselect all tracks, select [Deselect
all] in the menu, and press OK.
Select [Start] in the menu, and then press OK
to start to convert.
» Once complete, a new folder is created
automatically in the USB flash drive to store
all the new MP3 files.
•
To exit the menu, select [Exit], and then
press OK.
Note
• When you convert, never press any button.
• DTS CDs and copy-protected CDs cannot be converted.
• Writer-protected or password-protected USB flash
drives cannot be used to store MP3 files.
7 Adjust settings
•
[Lock] - Restrict the access to the current
disc. At the next time when you want to play
this disc or unlock it, you need to enter the
password.
•
[Unlock] - Play all discs.
[OSD Language]
Select a language for on-screen menu.
[Sleep Timer]
Switch automatically to standby at the preset time.
•
[Off] - Disable sleep mode.
•
[15 Mins], [30 Mins], [45 Mins], [60 Mins] Select the countdown time for this product to
switch to standby.
[Auto Standby]
Turn on/off the auto standby mode.
•
[On] - Switch to standby after 15 minutes
of inactivity (for example, in pause or stop
mode).
•
[Off] - Disable the auto standby mode.
Audio setup
Note
• If the setup option is grayed out, it means the setting
cannot be changed at the current state.
General setup
1
Press SETUP.
» [General Setup] menu is displayed.
2
1
2
3
4
Press SETUP.
» [General Setup] menu is displayed.
Press to enter the submenu.
Select an option, and then press OK.
Select a setting, and then press OK.
•
To return to the previous menu, press
BACK.
•
To exit the menu, press SETUP.
[Disc Lock]
Set the play restriction for a disc which is loaded in
the disc compartment (maximum 20 discs can be
locked).
Press to select [Audio Setup], and then
press to enter the submenu.
3 Select an option, and then press OK.
4 Select a setting, and then press OK.
•
To return to the previous menu,
press
BACK .
•
To exit the menu, press SETUP.
[Analogue Output]
Select an analogue setting based on the audio
device that is connected through the analogue
audio jack.
•
[LT/RT] - For the surround sound output
through two speakers.
•
[Stereo] - For the stereo output.
•
[Multi Channel] - For multi-channel output.
[Volume]
Set the default volume level when you play a disc.
EN
13
English
•
1. Press OK.
2. Press
to set the volume.
3. Press OK to confirm and exit.
[Sound Mode]
Select a preset sound effect to enhance the audio
output.
•
[3D] - Select a virtual surround sound effect
that is produced from the left and right audio
channels.
•
[Movie Mode] - Select a sound effect for
movies.
•
[Music Mode] - Select a sound effect for
music.
[Speaker Setup]
Optimize the surround output for the connected
speakers.
[CD Upsampling]
For better sound quality in stereo mode, convert
the music CD to a higher sampling rate.
•
[Off] - Turn off CD-upsampling.
•
[88.2kHz] - Convert to twice the original
sampling rate.
•
[176.4kHz] - Convert to four times the original
sampling rate.
[Night Mode]
Make loud sound level softer and soft sound level
louder so that you can watch the DVD movies at a
low volume, without disturbing others.
•
[On] - Enjoy quiet viewing at night.
•
[Off] - Enjoy surround sound with a full
dynamic range.
Note
• Applicable only to Dolby Digital encoded DVDs.
2
Press to select [Video Setup], and then
press to enter the submenu.
3 Select an option, and then press OK.
4 Select a setting, and then press OK.
•
To return to the previous menu, press
BACK.
•
To exit the menu, press SETUP.
[TV System]
Change this setting if the video does not appear
correctly. By default, this setting matches the most
common setting for TVs in your country.
•
[PAL] - For a PAL-system TV.
•
[Multi] - For TV that is compatible with both
PAL and NTSC.
•
[NTSC] - For an NTSC-system TV.
[TV Display]
Select a display format:
•
[4:3 Pan Scan] - For a 4:3 screen TV: full-height
display with the trimmed sides.
•
[4:3 Letter Box] - For a 4:3 screen TV: widescreen display with black bars on the top and
bottom of the screen.
•
[16:9] - For a wide-screen TV: display ratio
16:9.
[Progressive]
If a progressive scan TV is connected to this
product, turn on the progressive scan mode.
•
[On] - Turn on progressive scan.
•
[Off] - Turn off progressive scan mode.
Note
Video setup
1
Press SETUP.
» [General Setup] menu is displayed.
14
EN
• For more detailed description, see “Get started” >
“Turn on progressive scan”.
[Picture Setting]
Select a predefined set of picture color settings or
customize the personal setting.
•
[Standard] - Original color setting.
•
[Bright] - Vibrant color setting.
•
[Soft] - Warm color setting.
•
[Personal] - Customize the color setting. Set
the level of brightness, contrast, tint and color
saturation, then press OK.
[My Wallpaper]
Select a picture as the wallpaper.
•
[Default picture] - The default wallpaper
preset as the Philips logo.
[Saved picture] - A captured video image or
JPEG photo.
[Current picture] - Capture a video image or
JPEG photo and save it on the product.
•
Note
English
•
• If the language you have set is not available on the disc,
the disc uses its own default language.
• For some DVDs, the subtitle/audio language can only
1. Play a video or photo slideshow.
2. Select a video image or photo: press
to
pause, and then press SETUP.
3. Navigate to the option ([Video Setup] >
[My Wallpaper] > [Current picture]).
4. Press OK to confirm.
» One video image or JPEG photo is saved as
wallpaper.
» A newly saved image or photo replaces the
earlier one.
Preferences
Note
• Stop disc play before you can access to [Preferences].
change from the disc menu.
• To select the languages that are not listed in the menu,
select [Others]. Then check the “Language Code” list
at the back of this user manual and enter the respective
language code.
[Parental Control]
Restrict access to discs that are unsuitable for
children. These types of discs must be recorded
with ratings.
1. Press OK.
2. Select a rating level, then press OK.
3. Press the numeric buttons to enter the
password.
Note
• Rated DVDs above the level you set in [Parental
Control] require a password to be played.
• The ratings are country-dependent. To allow all discs to
play, select ‘8’.
• Some discs have ratings printed on them but are not
recorded with ratings. This function has no effect on
such discs.
1
2
Press SETUP.
» [General Setup] menu is displayed.
Press to select [Preferences], and then
press to enter the submenu.
3 Select an option, and then press OK.
4 Select a setting, and then press OK.
•
To return to the previous menu, press
BACK.
•
To exit the menu, press SETUP.
[Audio]
Select an audio language for disc play.
[Subtitle]
Select a subtitle language for disc play.
[Disc Menu]
Select a disc menu language.
[PBC]
Turn on or off the content menu of VCDs/SVCDs
with PBC (playback control) feature.
•
[On] - Display the index menu when you load
a disc for play.
•
[Off] - Skip the menu and start play from the
first track.
[Mp3/Jpeg Nav]
Select to display the folders or display all the files.
•
[View Files] - Display all the files.
•
[View Folders] - Display the folders of MP3/
WMA files.
[Password]
Set or change the password for locked discs and
play restricted DVDs.
EN
15
8 Additional information
Update software
For software updates, check the current software
version of this product to compare with the latest
software (if available) at the Philips website.
Caution
• Power supply must not be interrupted during software
upgrade.
1. Press the Numeric buttons to enter ‘136900’ or
the last set password at [Old Password] field.
2. Enter the new password at [New Password]
field.
3. Enter the new password again at [Confirm
PWD] field.
4. Press OK to exit the menu.
Note
• If you forget the password, enter ‘136900’ before you set
1
2
3
4
5
Press SETUP.
Select [Preferences] > [Version Info], and
then press OK.
Write down the file name, and then press
SETUP to exit the menu.
Visit www.philips.com/support to check for
the latest software version, using the file name
for this product.
Refer to the upgrade instructions on the
website for more information.
a new password.
[Version Info]
Display the software version of this product.
Note
• Disconnect the power cord for a few seconds and
connect again to turn on the product.
Note
• This information is required when you want to find out
if a newest software version is available at the Philips
website that you may download and install on this
product.
[Default]
Reset all the settings of this product to factory
default, except for [Disc Lock], [Parental Control]
and [Password] settings.
Care
Caution
• Never use solvents such as benzene, thinner, cleaners
available commercially, or anti-static sprays intended
for discs.
Clean discs
Wipe the disc with a micro fibre cleaning cloth from
the centre to the edge in a straight line movement.
Specifications
Note
• Specification and design are subject to change without
notice
USB
•
Compatibility: Hi-Speed USB (2.0)
•
Class support: UMS (USB Mass Storage Class)
16
EN
9 Troubleshooting
Warning
• Risk of electric shock. Never remove the casing of the
Main unit
The buttons on this unit do not work.
•
Disconnect this product from the power
outlet for a few minutes, then connect again.
No reaction to the remote control.
•
Connect this product to the power outlet.
•
Point the remote control at the IR sensor
located on the front panel of this product.
•
Insert the batteries correctly.
•
Insert new batteries in the remote control.
Picture
No picture.
•
See the TVs user manual on how to select
the correct input on the TV. Change the TV
channel until you see the Philips screen.
•
If you have turned on the progressive scan
setting or change the TV system setting,
switch back to default mode: 1) Press to
open the disc compartment. 2) Press the
Numeric button ‘1’ (for progressive scan) or
the Numeric button’3’ (for TV system).
Sound
No audio output from the TV.
•
Ensure that the audio cables are connected to
the audio input of the TV.
•
Assign the audio input of the TV to the
corresponding video input. See the TV user
manual for details.
No audio output from the loudspeakers of the
audio device (stereo system/amplifier/receiver).
•
Ensure that the audio cables are connected to
the audio input of the audio device.
•
Turn on the audio device to its correct audio
input source.
Play
product.
To keep the warranty valid, never try to repair the
product yourself.
If you have problems using this product, check the
following points before you request service. If you
still have a problem, register your product and get
support at www.philips.com/welcome.
The disc cannot be played.
•
The disc is badly scratched, deformed, or dirty.
Replace or clean the disc.
•
Use the correct disc format or file format.
The aspect ratio of the screen is not aligned with
the TV display setting.
•
The aspect ratio is fixed on the disc.
If you contact Philips, you will be asked for the model
and serial number of your product. The model
number and serial number are on the back of your
product. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
EN
17
English
Video
•
Signal system: PAL / NTSC
•
Composite video output: 1 Vpp ~ 75 ohm
•
Component video output: 0.7 Vpp ~ 75 ohm
Audio
•
Analog stereo output
•
Signal to noise ratio (1 kHz): > 90 dB
(A-weighted)
•
Dynamic Range (1 kHz): > 80 dB (A-weighted)
•
Crosstalk (1 kHz): > 80 dB
•
Distortion/noise: (1 kHz): > 70 dB
•
MPEG MP3: MPEG Audio L3
•
Digital output
•
Coaxial
Main unit
•
Dimensions (w x h x d): 360 x 37 x 210 (mm)
•
Net Weight: 1.45 kg
Power
•
Power supply rating: 110 - 240V, 50/60HZ
•
Power consumption: < 10 W
•
Power consumption in standby mode: < 1 W
Accessories supplied
•
Remote control and batteries
•
Audio/Video cables
•
User Manual
Laser specification
•
Type: Semiconductor laser InGaAIP (DVD),
AIGaAs (CD)
•
Wave length: 655 nm (DVD), 790 nm (CD)
•
Output Power: 7.0 mW (DVD), 10.0 mW
(VCD/CD)
•
Beam divergence: 60 degrees
10 Glossary
A
Aspect ratio
Aspect ratio refers to the length to height ratio of
TV screens. The ratio of a standard TV is 4:3, while
the ratio of a high-definition or wide TV is 16:9.
The letter box allows you to enjoy a picture with a
wider perspective on a standard 4:3 screen.
J
JPEG
A very common digital still picture format. A stillpicture data compression system proposed by the
Joint Photographic Expert Group, which features
small decrease in image quality in spite of its high
compression ratio. Files are recognized by their file
extension ‘.jpg’ or ‘.jpeg.’
M
MP3
A file format with a sound data compression
system. MP3 is the abbreviation of Motion Picture
Experts Group 1 (or MPEG-1) Audio Layer 3. With
the MP3 format, one CD-R or CD-RW can contain
about 10 times more data than a regular CD.
P
PBC
Playback Control. A system where you navigate
through a Video CD/Super VCD with on-screen
menus that are recorded onto the disc. You can
enjoy interactive playback and search.
Progressive scan
The progressive scan displays twice the number of
frames per second than in an ordinary TV system. It
offers higher picture resolution and quality.
W
WMA
Windows Media™ Audio. Refers to an audio
compression technology developed by Microsoft
Corporation. WMA data can be encoded with
Windows Media player version 9 or Windows
Media player for Windows XP. Files are recognized
by their file extension ‘.wma.’
18
EN
Language Code
Abkhazian
6566
Afar
6565
Afrikaans
6570
Amharic
6577
Arabic
6582
Armenian
7289
Assamese
6583
Avestan
6569
Aymara
6589
Azerhaijani
6590
Bahasa Melayu
7783
Bashkir
6665
Belarusian
6669
Bengali
6678
Bihari
6672
Bislama
6673
Bokmål, Norwegian
7866
Bosanski
6683
Brezhoneg
6682
Bulgarian
6671
Burmese
7789
Castellano, Español
6983
Catalán
6765
Chamorro
6772
Chechen
6769
Chewa; Chichewa; Nyanja 7889
9072
Ё᭛
Chuang; Zhuang
9065
Church Slavic; Slavonic 6785
Chuvash
6786
Corsican
6779
Česky
6783
Dansk
6865
Deutsch
6869
Dzongkha
6890
English
6978
Esperanto
6979
Estonian
6984
Euskara
6985
6976
Faroese
7079
Français
7082
Frysk
7089
Fijian
7074
Gaelic; Scottish Gaelic 7168
Gallegan
7176
Georgian
7565
Gikuyu; Kikuyu
7573
Guarani
7178
Gujarati
7185
Hausa
7265
Herero
7290
Hindi
7273
Hiri Motu
7279
Hrwatski
6779
Ido
7379
Interlingua (International)7365
Interlingue
7365
Inuktitut
7385
Inupiaq
Irish
Íslenska
Italiano
Ivrit
Japanese
Javanese
Kalaallisut
Kannada
Kashmiri
Kazakh
Kernewek
Khmer
Kinyarwanda
Kirghiz
Komi
Korean
Kuanyama; Kwanyama
Kurdish
Lao
Latina
Latvian
Letzeburgesch;
Limburgan; Limburger
Lingala
Lithuanian
Luxembourgish;
Macedonian
Malagasy
Magyar
Malayalam
Maltese
Manx
Maori
Marathi
Marshallese
Moldavian
Mongolian
Nauru
Navaho; Navajo
Ndebele, North
Ndebele, South
Ndonga
Nederlands
Nepali
Norsk
Northern Sami
North Ndebele
Norwegian Nynorsk;
Occitan; Provencal
Old Bulgarian; Old Slavonic
Oriya
Oromo
Ossetian; Ossetic
Pali
Panjabi
Persian
Polski
Português
7375
7165
7383
7384
7269
7465
7486
7576
7578
7583
7575
7587
7577
8287
7589
7586
7579
7574
7585
7679
7665
7686
7666
7673
7678
7684
7666
7775
7771
7285
7776
7784
7186
7773
7782
7772
7779
7778
7865
7886
7868
7882
7871
7876
7869
7879
8369
7868
7878
7967
6785
7982
7977
7983
8073
8065
7065
8076
8084
Pushto
Russian
Quechua
Raeto-Romance
Romanian
Rundi
Samoan
Sango
Sanskrit
Sardinian
Serbian
Shona
Shqip
Sindhi
Sinhalese
Slovensky
Slovenian
Somali
Sotho; Southern
South Ndebele
Sundanese
Suomi
Swahili
Swati
Svenska
Tagalog
Tahitian
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga (Tonga Islands)
Tsonga
Tswana
Türkçe
Turkmen
Twi
Uighur
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Walloon
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
8083
8285
8185
8277
8279
8278
8377
8371
8365
8367
8382
8378
8381
8368
8373
8373
8376
8379
8384
7882
8385
7073
8387
8383
8386
8476
8489
8471
8465
8484
8469
8472
6679
8473
8479
8483
8478
8482
8475
8487
8571
8575
8582
8590
8673
8679
8765
6789
8779
8872
8973
8979
9085
19
© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
DVP3526_94_UM_V1.0_1026
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement