Samsung DIGIMAX L55W Manuel de l'utilisateur

Add to my manuals
148 Pages

advertisement

Samsung DIGIMAX L55W Manuel de l'utilisateur | Manualzz
User’s Manual
Thank you for buying a Samsung Camera.
This manual will guide you through using the camera, including capturing images,
downloading images and using the application software.
Please read this manual carefully before using your new camera.
ENGLISH
Instructions
ƈ Use this camera in the following order
Set up the
camera driver
Before connecting the camera to a PC, via the USB
cable, you will need to set up the camera driver.
Install the camera driver that is contained in
Application software CD-ROM. (p.118)
Take a picture. (p.26)
Take a picture
Insert the
USB cable
Check the
camera’s power
Check
[Removable Disk]
Insert the supplied USB cable into the PC’s USB
port and the camera’s USB connection terminal.
(p.127)
Check the camera’s power. If the power is turned off,
press the camera button to turn it on.
Open WindowŖs EXPLORER and search for
[Removable Disk]. (p.128)
ƃ If you use a card reader to copy the images on the memory card to your PC, the images
could be damaged. When transferring the images taken with the camera to your PC, be sure
to use the supplied USB cable to connect the camera to your PC. Please note that the
manufacturer holds no responsibility for loss or damage of images on the memory card due
to the use of a card reader.
ŝ2Ş
Contents
READY
ƃGetting to know your camera
ƃDanger
ƃWarning
ƃCaution
ƃSystem chart
ƃIdentification of features
ƈFront & Top
ƈBack & Bottom
ƈSide / 5-function button
ƈCradle
ƈSelf-timer lamp
ƈCamera Status Lamp
ƈMode icon
ƃConnecting to a Power Source
ƈUsing the SAC-41
ƈHow to charge the rechargeable battery
(SLB-1237) with the SAC-41.
ƈUsing the battery
ƈRemoving the battery
ƃInstructions on how to use the memory card
ƃInserting the memory card
ƃRemoving the memory card
ƃWhen Using the Camera for the First Time
5
6
6
7
8
10
10
10
11
11
12
12
12
13
14
15
17
17
18
20
20
21
RECORDING
ƃLCD monitor indicator
ƃChanging the recording mode
ƈSelecting the [MODE] menu
ƈIf the [STILL & MOVIE] menu was selected
ƈIf the [FULL] menu was selected
ƈIf the [CUSTOM] menu was selected
ƃStarting the recording mode
ƈHow to use the Auto mode
ƈHow to use the Movie clip mode
ƈRecording the movie clip without voice
ƈPausing while recording a movie clip
(Successive Recording)
22
23
23
24
24
25
26
26
26
27
ƈHow to use the Program mode
ƈHow to use the Scene modes
ƈHow to use the VOICE RECORDING mode
ƈPausing while recording a voice recording
ƃThings to Watch Out for When Taking
Pictures
ƃUsing the camera buttons to adjust the
camera
ƈPOWER button
ƈSHUTTER button
ƈZOOM W / T button
ƈVoice recording / Voice memo / UP button
ƈMacro / Down button
ƈFocus lock
ƈFlash / Left button
ƈSelf-timer / Remote / Right button
ƈMENU / OK button
ƈM (Mode) button
ƈE (Effect) button
ƈSpecial Effect : Colour
ƈSpecial Effect : Preset focus frames
ƈSpecial Effect : Composite shooting
ƈSpecial Effect : Photo Frame
ƈMovie Clip frame stabiliser
ƈ+/- button
ƈWide button
ƃUsing the LCD monitor to adjust the camera
settings
ƈHow to use the menu
ƈMode
ƈMode set
ƈSize
ƈQuality / Frame rate
ƈMetering
ƈContinuous shot
ƈSharpness
ƈOSD(On Screen Display) information
ƈSave / Load a specific camera configuration
(MySET)
27
28
29
29
30
31
31
31
31
34
35
36
37
39
41
41
44
44
45
46
48
49
50
54
55
57
57
58
59
60
61
61
62
62
63
27
ŝ3Ş
Contents
PLAY
ƃStarting play mode
64
ƈPlaying back a still image
64
ƈPlaying back a movie clip
65
ƈHow to capture the movie clip
65
ƈOn camera movie trimming
66
ƈPlaying back a recorded voice
67
ƃLCD monitor indicator
68
ƃUsing the camera buttons to adjust the
camera
69
ƈThumbnail / Enlargement button
70
ƈVoice memo / Up button
70
ƈPlay & Pause / Down button
71
ƈDelete button
72
ƈ Red eye reduction / Printer button
73
ƈLeft / Right / Menu / OK button
74
ƈAlbum button
75
ƈRemote control
78
ƃSetting up the play back function using the
LCD monitor
80
ƈRotating an image
83
ƈResize
84
ƈProtecting images
85
ƈDeleting all images
86
ƈDPOF
86
ƈDPOF : STANDARD
87
ƈDPOF : INDEX
87
ƈDPOF : PRINT SIZE
88
ƈDPOF : CANCEL
88
ƈOn Screen Display information
89
ƈCopy To Card
90
ƈPictBridge
91
ƈPictBridge : Picture Selection
92
ƈPictBridge : Print Setting
93
ƈPictBridge : Printing
94
ƈPictBridge : RESET
95
ŝ4Ş
SETUP
ƃSetup menu
ƈFile name
ƈAuto power off
ƈLanguage
ƈFormatting a memory card
ƈSetting up the Date / Time / Date type
ƈImprinting the recording date
ƈAuto Focus lamp
ƈSound
ƈConnecting an External Device (USB)
ƈLCD brightness
ƈSelecting Video out type
ƈQuick view
ƈInitialisation
ƃSetting up the Mycam menu
ƈStart up image
ƈStart up sound
ƈShutter sound
ƃImportant notes
ƃWarning indicator
ƃBefore contacting a service centre
ƃSpecifications
96
97
98
99
99
100
100
101
101
102
102
103
105
105
106
106
107
107
108
110
111
114
SOFTWARE
ƃSoftware Notes
ƃAbout the software
ƃSetting up the application software
ƃStarting PC mode
ƃRemoving the USB Driver for Windows 98SE
ƃRemovable Disk
ƃRemoving the removable disk
ƃSetting up the USB Driver for MAC
ƃUsing the USB Driver for MAC
ƃDigimax Master
ƃDigimax Reader
ƃFAQ
116
117
118
127
130
132
133
134
134
135
140
142
Getting to know your camera
Thank you for buying a Samsung Digital Camera.
ƃ Prior to using this camera, please read the user manual thoroughly.
ƃ When you require After Sales service, please bring the camera and the cause of the camera
malfunction (such as battery, Memory card etc.) to the A/S centre.
ƃ Please check that the camera is operating properly prior to when you intend to use it
(e.g. for a trip or an important event) to avoid disappointment. Samsung camera takes no
responsibility for any loss or damages that may result from camera malfunction.
ƃ Keep the manual in a safe place.
Ҭ Microsoft, Windows and Windows logo are registered trademarks of Microsoft Corporation
incorporated in the United States and/or other countries.
Ҭ Apple, Mac and QuickTime logo are registered trademarks of Apple computer.
Ҭ All brand and product names appearing in this manual are registered trademarks of their
respective companies.
This manual contains instructions on using this camera that will help you to use this
camera safely and correctly. This will help prevent danger and injury to others.
DANGER
DANGER indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING
WARNING indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury.
CAUTION
CAUTION indicates a potentially hazardous situation, which, if not avoided,
may result in a minor or moderate injury.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate
collection systems) This marking shown on the product or its literature, indicates that
it should not be disposed with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it responsibly to
promote the sustainable reuse of material resources. Household users should contact either the
retailer where they purchased this product, or their local government office, for details of where
and how they can take this item for environmentally safe recycling. Business users should
contact their supplier and check the terms and conditions of the purchase contract.
This product should not be mixed with other commercial wastes for disposal.
ŝ5Ş
Danger
ƈ Do not attempt to modify this camera in any way. This may result in fire, injury, electric shock
or severe damage to you or your camera. Internal inspection, maintenance and repairs
should be carried out by your dealer or Samsung Camera Service centre.
ƈ Please do not use this product in close proximity to flammable or explosive gases, as this
could increase the risk of explosion.
ƈ Should any form of liquid or a foreign object enter the camera, do not use it. Switch off the
camera, and then disconnect the power source. You must contact your dealer or Samsung
Camera Service centre. Do not continue to use the camera as this may cause a fire or
electric shock.
ƈ Do not insert or drop metallic or inflammable foreign objects into the camera through access
points e.g. the memory card slot and battery chamber. This may cause a fire or electric
shock.
ƈ Do not operate this camera with wet hands. This could pose a risk of electric shock.
Warning
ƈ Do not use the flash in close proximity to people or animals. Positioning the flash too close to
your subject’s eyes, may cause eyesight damage.
ƈ For safety reasons keep this product and accessories out of reach of children or animals to
prevent accidents e.g.:
ҮSwallowing battery or small camera accessories. If an accident should occur, please
consult a doctor immediately.
ҮThere is the possibility of injury from the camera’s moving parts.
ƈ battery and camera may become hot during prolonged use and it may result in camera
malfunction. Should this be the case, allow the camera to sit idle for a few minutes to allow it
time to cool.
ƈ Do not leave this camera in places subject to extremely high temperatures, such as a sealed
vehicle, direct sunlight or other places of extreme variances in temperature. Exposure to
extreme temperatures may adversely affect the camera’s internal components and could
cause a fire.
ƈ When in use, do not cover the camera or AC Charger. This may cause heat to build up and
distort the camera body or cause a fire. Always use the camera and its accessories in a wellventilated area.
ŝ6Ş
Caution
ƈ Leaking, overheating, or burst battery could result in fire or injury.
ҮUse battery with the correct specification for the camera.
ҮDo not short circuit, heat or dispose of battery in fire.
ҮDo not insert the battery with the reverse polarities.
ƈ Remove the battery when not planning to use the camera for a long period of time.
Battery may leak corrosive electrolyte and permanently damage the camera’s components.
ƈ Do not fire the flash while it is in contact with hands or objects. Do not touch the flash after
using it continuously. It may cause burns.
ƈ Do not move the camera while it is switched on, if you are using the AC Charger.
After use, always switch off the camera before unplugging the cable from the wall socket.
Then make sure that any connector cords or cables to other devices are disconnected before
moving the camera. Failure to do so may damage the cords or cables and cause a fire or
electric shock.
ƈ Take care not to touch the lens and where the lens cover is to avoid taking an unclear image
and possibly causing camera malfunction.
ƈ Avoid obstructing the lens or the flash when you capture an image.
An FCC warning
ҮThis device has been tested in accordance with the limits of a class B digital device
under item 15 of the FCC rules. These limits are designed to provide protection
against harmful interference in commercial installation. This equipment generates,
absorbs and can emit radio frequency energy. If it is not installed and used in
accordance with the instructions, it may cause harmful interference to radio
communication. There is however, no guarantee that interference will not occur in
some situations. Should any interference occur when this device is in operation,
please try one or more of the following measures.
ƈ Change the location and direction of any aerial.
ƈ Increase distance between the camera and the affected device.
ƈ Use a different socket away from the affected device.
ƈ Please contact a Samsung agent or a radio/TV engineer.
ҮThis device complies with part 15 of the FCC Rules.
ҮChanges or modifications not expressly approved by the party responsible for
compliance could void the users authority to operate the equipment.
ŝ7Ş
System chart
Please check that you have the correct contents before using this product. The contents can
vary depending on the sales region. To buy the optional equipment, contact your nearest
Samsung dealer or Samsung service centre.
< Included items >
Camera case
DPOF compatible
printer (see p.86)
AC cord
Remote control
User manual,
Product warranty
Camera strap
Software CD
(see p.117)
SD memory card/MMC
(see p.18)
SAC-41
Rechargeable
battery (SLB-1237)
Cradle
ŝ8Ş
System chart
System Requirements
For Windows
Computer
(see p.127)
PictBridge compatible
printer(see p.91)
ҮWindows 98/ 98SE/ 2000/ ME/ XP
ҮPC with processor better than Pentium II
450MHz (Pentium 700MHz or better is
recommended)
Ү200MB of available hard-disk space
(Over 1GB is recommended)
ҮMinimum 64MB RAM (XP : 128MB)
Ү1024x768 pixels, 16-bit colour display
compatible monitor (24-bit colour display
recommended)
ҮDirectX 9.0 or later
ҮUSB port
ҮCD-ROM drive
For Macintosh
USB cable
ҮPower Mac G3 or later
ҮMac OS 10.0 or later
ҮMinimum 64MB RAM
Ү110MB of available hard-disk space
ҮUSB port
ҮCD-ROM drive
ҮQuickTime Player
AV cable
CAUTION
When you connect the camera to a
computer, printer or external monitor, you
have to use the USB/ AV cable supplied
with the camera, or the external devices
can't recognise the camera.
External monitor
Yellow colour - Video
White colour - Voice
(see p.103)
ŝ9Ş
Identification of features
Front & Top
Power button
Shutter button
Microphone
Self-timer lamp
Remote control
sensor
Auto Focus lamp
Flash
Lens / Lens cover
Back & Bottom
Camera status lamp
Wide view button
Red-eye reduction button / Printer button
Zoom W button
(Thumbnail)
Zoom T button
(Digital zoom)
M(Mode/Album) button
LCD monitor
Play mode button
Strap eyelet
Speaker
+/-, Delete button
E (Effects) button
Tripod
ŝ10Ş
5 function button
DC/USB/AV connection terminal
Cradle connector
Identification of features
Side/ 5-function button
Voice memo / Voice Recording / Up button
Menu /
OK button
Battery chamber
cover
Self-timer /
Remote /
Right button
Flash / Left
button
Battery chamber
Memory card slot
Macro / Down button
Play & Pause button
Cradle
ƈ You can recharge your rechargeable battery, transfer a captured image to print, and
download images with the cradle. (Refer to page 14, 91~95, 125~127)
ƃ Top
Camera
connection
terminal
ƃ Back
DC connection
terminal
USB port
AV connection
terminal
ŝ11Ş
Identification of features
ƈ Self-timer lamp
Icon
Status
Blinking
Blinking
Blinking
Description
For the 2 seconds, the lamp blinks quickly at 0.25-second intervals.
For the first 8 seconds, the lamp blinks at 1 second intervals.
For the final 2 seconds, the lamp blinks quickly at 0.25-second intervals.
A picture will be taken after about 10 seconds and 2 seconds later a
second picture will be taken.
ƈCamera Status Lamp
Status
Power on
Description
The lamp turns on and off when the camera is ready to take a picture
After taking a picture
The lamp blinks while saving the image data and turns off when the
camera is ready to take a picture
While voice memo recording The lamp blinks at 1 second intervals
While voice recording
The lamp blinks at 1 second intervals
When the USB cable is inserted to a PC The lamp lights up (LCD monitor turns off after initializing the device)
Transmitting Data with a PC The lamp blinks (LCD monitor turns off)
When the USB cable is inserted to a printer The lamp is off
When the printer is printing The lamp blinks
When the AF activates
The lamp turns on (The camera focus on the subject)
The lamp blinks (The camera doesn't focus on the subject)
ƈMode icon : Refer to page 23~25 for more information about the camera mode setting.
MODE
MOVIE
VOICE RECORDING
AUTO
PROGRAM
PLAY
Icon
SCENE
MODE
NIGHT
PORTRAIT
DAWN
SUNSET
CHILDREN LANDSCAPE
TEXT
CLOSE UP
Icon
MODE
Icon
ŝ12Ş
BACKLIGHT FIREWORKS BEACH & SNOW
-
Connecting to a Power Source
ƈ You should use the rechargeable battery (SLB-1237) supplied with the camera.
Be sure to charge the battery before using the camera.
ƈ SLB-1237 rechargeable battery Specification
Model
SLB-1237
Type
Lithium Ion
Capacity
1280mAh
Voltage
3.7V
Charging time
Approx. 170 MIN (Using the SAC-41)
ƈ Number of images and battery life
Still image
Movie
Battery life
Number of images
Recording time
Approx. 180 MIN
Approx. 340
Approx.90 MIN
Based on
the
following
shooting
conditions
Using the fully charged battery Auto
mode, 5 megapixel image size
Fine image quality,
Shot to shot interval : 30Sec.
Changing the zoom position
between the Wide and the Tele
Tele limits for every shot. Using
the flash every second shot.
Based on
the
following
shooting
conditions
Using the fully charged battery
640X480 image size
30fps frame rate
ſ These figures are measured under Samsung’s standard conditions and Shooting conditions
and may vary depending on the usage.
INFORMATION
Important information about battery usage
ƃ When the camera is not used, turn off the camera power.
ƃ Please remove the battery if the camera will not be used for long periods.
Battery can lose power over time and are prone to leaking if kept inside the camera.
ƃ Low temperatures (below 0˚C) can affect the performance of the battery and you may
experience reduced battery life.
ƃ Battery will usually recover at normal temperatures.
ƃ During extended use of the camera, the camera body may become warm.
This is perfectly normal.
ŝ13Ş
Connecting to a Power Source
Using the SAC-41
If you have access to a mains supply, using an SAC-41 allows the camera to be used for long
periods of time.
Plug the SAC-41 into the DC connection terminal on the camera or cradle.
Before turning on the camera power with an SAC-41, insert the rechargeable battery that was
charged for over 10 minutes with turning off the camera.
DANGER
ƃ Always turn off the power before taking the SAC-41 out of the mains supply.
ƃ As with all mains powered devices, safety is important. Ensure that neither the camera
nor Charger comes into contact with water or metallic materials.
ƃ Please ensure that you use the SAC-41 with the correct specification for the camera.
Failure to do so may affect your warranty.
ƈ How to charge the rechargeable battery (SLB-1237) with the SAC-41.
ƃ Charging with the cradle
1. Insert the rechargeable battery into the battery
chamber.
2. Place the camera correctly in the cradle.
3. Put the SAC-41 into your power socket
and DC connection terminal of the cradle.
Charging LED
ŝ14Ş
Connecting to a Power Source
ƈ How to charge the rechargeable battery (SLB-1237) with the SAC-41.
ƃ Charging with the camera
1. Insert the rechargeable battery into the battery
chamber.
2. Put the SAC-41 into your power socket and DC
connection terminal of the camera.
Charging LED
ƈ Important information about battery (SLB-1237) charging with the SAC-41
ƃ If the charging LED of the SAC-41 does not turn on or
blink after inserting the rechargeable battery, please
check whether the battery are inserted correctly.
ƃ Please check the battery charging status with the
charging LED of SAC-41.
Charging LED
ſ If you connect the SAC-41 to camera without inserting the rechargeable battery, the charging
LED will brink or be off. In this case, insert the battery and connect the SAC-41 again.
ŝ15Ş
Connecting to a Power Source
ƈ Charging LED of the SAC-41
Status
Using the cradle
Direct to the camera
Being Charged
Red LED is on
Red LED is on
Charging is complete
Green LED is on
Green LED is on
Charging error
Red LED is off or blinking
Red LED is off or blinking
ƃ If there is a charging error, please check all the power connections are in place.
ƃ A USB cable for transmitting data can’t be used for charging the rechargeable battery.
ƈ Charging time (When the camera is turned off)
- Using the cradle
- Using the SAC-41
: About 150MIN
: About 150MIN
INFORMATION
Important information about the rechargeable battery.
ƃ If you charge the battery with the camera power on, the battery can't charge fully.
To charge the battery fully, turn the camera off when you charge it.
ƃ If you insert the fully discharged battery to charge it, do not turn on the camera at the
same time. The camera may not be turned on because of the low battery capacity.
Charge the battery for over 10 minutes to use the camera.
ƃ Do not use the flash frequently or take a movie clip with the fully discharged battery
charged for a short time. Even if the charger is inserted, the camera power may be turned
off because the rechargeable battery is discharged again.
ŝ16Ş
Connecting to a Power Source
Using the battery
: If the camera does not turn on after you have inserted battery, please
check whether the battery are inserted with the correct polarity(+/-).
1. Open the battery chamber
cover by pushing in the
direction of the arrow.
2. Insert the battery taking
note of the polarity
(+ / -).
3. To close the battery
chamber cover, push it
until it clicks.
Removing the battery
1. Turn off the camera power.
Open the battery chamber cover and move the battery
holder aside. The battery will be released.
2. Take out the battery and close the battery chamber
cover.
INFORMATION
ƃ When the battery chamber cover is opened, do not press the battery chamber cover by
force. This may cause the battery chamber cover modification or breakage.
ƈThere are 4 indicators for battery condition that are displayed on the LCD monitor.
Battery indicator
Battery status
Low battery capacity Low battery capacity Low battery capacity
The battery is fully
(Prepare to recharge or (Prepare to recharge or (Prepare to recharge or
charged
use spare battery)
use spare battery)
use spare battery)
ŝ17Ş
Instructions on how to use the memory card
ƃ Be sure to format the memory card (see p.99) if you are using a newly purchased memory for
the first time, if it contains data that the camera cannot recognise, or if it contains images
captured with a different camera.
ƃ Turn off the camera power whenever the memory card is being inserted or removed.
ƃ Repeated use of the memory card will eventually reduce the memory card’s performance.
Should this be the case, you will need to purchase a new memory card.
Wear and tear on the memory card is not covered by the Samsung warranty.
ƃ The memory card is an electronic precision device.
Do not bend, drop or subject the memory card to any heavy impact.
ƃ Do not store the memory card in an environment with strong electronic or magnetic fields,
e.g. near loud speakers or TV receivers.
ƃ Please do not use or store in an environment where there are extremes in temperature.
ƃ Do not allow the memory card to become dirty or to come into contact with any liquid.
Should this happen, clean the memory card with a soft cloth.
ƃ Please keep the memory card in its case when not in use.
ƃ During and after periods of extended use, you may notice that the memory card is warm.
This is perfectly normal.
ƃ Do not use a memory card that is used in another digital camera.
To use the memory card in this camera, format the memory card using this camera.
ƃ Do not use a memory card formatted by another digital camera or memory card reader.
ƃ If the memory card is subjected to any of the following, the recorded data may become
corrupted :
- When the memory card is used incorrectly.
- If the power is switched off or the memory card is removed while recording, deleting
(formatting) or reading.
ƃ Samsung cannot be held responsible for lost data.
ƃ It is advisable to copy important data onto other media as back-up e.g. floppy disks, hard
disks, CD etc.
ƃ If there is insufficient memory available
: A [CARD FULL! / MEMORY FULL!] message will appear and the camera will not operate.
To optimise the amount of memory in the camera, replace the memory card or delete
unnecessary images stored on the memory.
ŝ18Ş
Instructions on how to use the memory card
INFORMATION
ƃ Don't remove the memory card when the camera status lamp is blinking as this may
cause damage to data in the memory card.
ƈ The camera can use SD Memory Cards and MMC (Multi Media Cards).
Please consult the enclosed manual for using the MMC Cards.
The SD memory card has a write protect switch
that prevents image files from being deleted or
formatted. By sliding the switch to the bottom of
the SD memory card, the data will be protected.
By sliding the switch to the top of the SD memory
card, the data protection will be cancelled.
Slide the switch to the top of the SD memory card
before taking a picture.
Card pins
Write
protect
switch
Label
[ SD (Secure Digital) memory card ]
ƈ When using a 24MB internal memory, the specified shooting capacity will be as follows.
These figures are approximate as image capacities can be affected by variables such as
subject matter and memory card type.
Recorded image size
Still
image
* Movie
clip
TIFF
S. FINE
FINE
NORMAL
30FPS
15FPS
5M
1(1)
9(9)
18(19)
27(27)
-
-
4M
2(1)
12(11)
23(22)
34(33)
-
-
3M
2(2)
14(15)
28(29)
41(43)
-
-
2M
4(4)
23(25)
45(46)
64(67)
-
-
1M
10(8)
47(41)
74(64)
106(99)
-
-
VGA
24(22)
99(92)
148(135)
185(185)
-
-
640
-
-
-
-
)JW]\ 1min 26sec )JW]\ 2min 06sec
320
-
-
-
-
)JW]\ 3min 25sec )JW]\ 4min 38sec
160
-
-
-
-
)JW]\ 6min 04sec )JW]\ 7min 10sec
ſ Figures in brackets indicate the approximate number of pictures that can be taken using the
wide angle mode.
ſ The recording times can be changed by the zoom operation.
The zoom button doesn’t use during the movie recording.
ŝ19Ş
Inserting the memory card
1. Turn off the camera’s power and pull the battery chamber
cover in the direction of the arrow to open.
2. Have the front of the memory card facing toward the front
of the camera (lens) and the card pins toward the back of
the camera (LCD monitor), and then push the memory
card into the card slot until you hear a click.
3. To close, push the battery chamber cover until you hear a
click. If the memory card does not slide in smoothly, do
not attempt to insert it by force. Check the direction of
insertion, and then insert it correctly. Do not insert the
memory card the wrong way round. Doing so may
damage the memory card slot.
Removing the memory card
1. Turn the power off using the power button.
Open the battery chamber cover and press the memory
card as shown in the image and release.
2. Remove the memory card and close the battery chamber
cover.
INFORMATION
ƃ When the camera is turned on, inserting or removing the memory card turns the camera
power off.
ŝ20Ş
When Using the Camera for the First Time
ƈ Charge the rechargeable battery fully before using the camera for the first time.
ƈ When the camera is turned on for the first time, a menu will be displayed to set date, time and
language in the LCD monitor. This menu will not be displayed after setting up the date, time
and language. Set up the date, time and language before using this camera.
ƃ Setting up the date, time and date type
1. Select the [DATE&TIME] menu by pressing the
UP/DOWN button and press the RIGHT button.
SETUP
2. Select the desired sub menu by pressing the UP/ DOWN/
DATE&TIME Ɗ
LEFT/ RIGHT button and press the OK button.
LANGUAGE
05/05/01 13:01
ƌ
RIGHT button : selects YEAR/ MONTH/ DAY/ HOUR/
YYYY/MM/DD
MINUTE/ DATE TYPE
BACK:Ȝ
SET:OK
LEFT button
: Moves the cursor to the [DATE&TIME]
main menu if the cursor is at the first
item of the date and time setup. In all other instances, the cursor will be
shifted to the left of its current position.
UP/ DOWN button : changes the value of each item.
ƃ Setting up the language
1. Select the [LANGUAGE] menu by pressing the
UP/DOWN button and press the RIGHT button.
2. Select the desired sub menu by pressing the UP/ DOWN
button and press the OK button.
When the settings are complete, press the MENU button
twice to exit the menu screen.
SETUP
DATE&TIME
ENGLISH
LANGUAGE ጥૹ࿴
FRANÇAIS
DEUTSCH
ESPAÑOL
BACK:Ȝ
SET:OK
INFORMATION
ƃ You can select 21 languages. These are listed below :
English, Korean, French, German, Spanish, Italian, S.Chinese, T.Chinese, Japanese,
Russian, Portuguese, Dutch, Danish, Swedish, Finnish, Thai,
BAHASA(MALAY/ INDONESIAN), Arabic, Hungarian, Czech and Polish.
ƃ Even if the camera is restarted, the language setting will be maintained.
ŝ21Ş
LCD monitor indicator
ƈ The LCD monitor displays information about the shooting functions and selections.
ƈ To view your subject using the wide view, press the Wide view button. The illustrations in this
manual are based on a normal angle of view.
؊
؉
‫ڹ‬
؈
‫ں‬
؇
‫ڻ‬
؆
‫ڼ‬
؅
‫ڽ‬
‫ۇ‬
‫ھ‬
‫ۆ‬
‫ڿ‬
‫ۅ‬
‫ۀ‬
‫ۄ‬
‫ۂ ہ‬
‫ۃ‬
[Image & Full Status]
No.
Description
1
Recording mode
Icons
Page
p.58
2
Battery
p.17
3
Continuous shot/ Stabiliser
p.61
4
Flash
p.37
5
Self-timer
p.39
6
Macro
p.35
7
Metering
p.61
8
Card inserted indicator
-
9
Auto focus frame
-
10
Camera shake warning
p.30
11
Date/ Time
12
Exposure compensation
p.52
13
ISO
p.51
14
White Balance
p.51
15
RGB
16
Sharpness
ŝ22Ş
2005/08/01 01:00 PM
RGB
p.100
p.50
p.62
LCD monitor indicator
17
Image quality / Frame rate
18
Image size
19
TIFF
p.60
p.59
Number of available shots remaining
18
Remaining time (Movie clip/ Voice recording)
00:01:30/ 01:00:00
p.19
p.19
20
Voice memo/ Mic. off
p.29/27
21
Optical/ Digital Zoom bar/
Digital Zoom rate
p.32
Changing the recording mode
ƈ You can select the desired working mode by the M (mode) button located on the back of the
camera and [MODE], [MODE SET] menu. Auto, Program, Movie clip, Scene (Night, Portrait,
Children, Landscape, Text, Close-up, Dawn, Sunset, Backlight, Fireworks, Beach & Snow)
camera modes are available.
ƃSelecting the [MODE] menu
1. Insert the battery (p.17).
2. Insert the memory card (p.20). As this camera has a 24MB internal memory, you do not
need to insert the memory card. If the memory card is not inserted, an image will be stored
in the internal memory. If the memory card is inserted, an image will be stored on the
memory card.
3. Close the battery chamber cover.
4. Press the power button to turn on the camera.
5. Press the menu button and a menu will display.
MODE
6. Use the Left/ Right button to select the [MODE] menu.
STILL & MOVIE
FULL
7. Select [STILL & MOVIE], [FULL] or [CUSTOM] sub menu
CUSTOM
by pressing the UP/ DOWN button.
- [STILL & MOVIE] : A still image mode that was selected
on the [MODE SET] menu and movie
clip mode can be selected.
Refer to page 58 for more information about using the [MODE SET] menu.
- [FULL] : Auto, Program, Movie clip and Scene modes can be selected.
- [CUSTOM] : Modes set as on in the [MODE SET] menu can be selected.
8. Press the MENU button and the menu will disappear.
ŝ23Ş
Changing the recording mode
ƃChanging the recording mode : If the [STILL & MOVIE] menu was selected
Steps from 1-4 are the same as those for selecting the [MODE] menu.
5. The recording mode used just before will display.
6. Press the M (Mode) button located on the back of the camera and the recording mode will
change to the movie clip mode.
7. Press the M (Mode) button again and a still image mode selected on the [MODE SET]
menu will be selected.
Pressing the M (Mode) button
[AUTO mode]
[MOVIE CLIP mode]
ƃChanging the recording mode : If the [FULL] menu was selected
Steps from 1-4 are the same as those for selecting the [MODE] menu.
5. The recording mode used just before will display.
6. Press the M (Mode) button located on the back of the camera and the mode selection
menu will display.
7. To select the Auto, Program, Movie clip or Scene modes, press the Left/ Right button.
To move between the Auto, Manual, Movie clip menu line and Scene menu line, press the
Up/ Down button.
AUTO
Pressing the Left button
SET:OK
MOVIE
SET:OK
[Mode selection menu]
[Selecting the Movie clip mode]
NIGHT
Pressing the Up button
SET:OK
[Selecting the Scene mode]
8. Press the M (Mode) button and the mode selection menu will disappear.
ŝ24Ş
Changing the recording mode
ƃChanging the recording mode : If the [CUSTOM] menu was selected
Steps from 1-4 are the same as those for selecting the [MODE] menu.
5. The recording mode used just before will display.
6. Press the M (Mode) button located on the back of the camera and the mode selection
menu will display.
7. You can select modes set as on in the [MODE SET] menu by pressing the Up/ Down/ Left/
Right buttons. Refer to page 58 for more information about using the [MODE SET] menu.
AUTO
MOVIE
Pressing the Left button
SET:OK
SET:OK
[Mode selection menu]
[Selecting the Movie clip mode]
NIGHT
Pressing the Up button
SET:OK
[Selecting the Scene mode]
8. Press the M (Mode) button and the mode selection menu will disappear.
ŝ25Ş
Starting the recording mode
ƈHow to use the Auto mode
Use this for shooting basic still images.
1. Select the [FULL] sub menu on the [MODE] menu (p.23).
2. Select the Auto mode by pressing the M (Mode)
button (p.24).
3. Point the camera towards the subject and compose
the image by using the LCD monitor.
4. Press the shutter button to capture an image.
[AUTO mode]
INFORMATION
ƃIf the auto focus frame turns to red when you press the shutter button down half way, it
means that the camera cannot focus on the subject. Should this be the case, the camera
is less likely to capture an image clearly.
ƃAvoid obstructing the lens or the flash when you capture an image.
ƈHow to use the Movie clip mode
A movie clip can be recorded for as long as the available recording time of the memory
capacity allows.
1. Select the [FULL] sub menu on the [MODE] menu
(p.23).
2. Select the Movie clip mode by pressing the M
(Mode) button (p.24).
3. Point the camera towards the subject and compose
the image by using the LCD monitor.
4. Press the shutter button once and movie clips are
[MOVIE CLIP mode]
recorded for as long as the available recording time
allows. Movie clips will still be recorded if the shutter
button is released.
If you wish to stop recording, press the shutter button again.
ſ Image size and type are listed below.
- Image size : Normal angle mode - 640X480, 320X240, 160X120 (user selectable)
Wide angle mode - 640X360, 384X216, 256X144 (user selectable)
- Movie clip file type : MP4 (MPEG-4)
ŝ26Ş
Starting the recording mode
ƈRecording the movie clip without voice
You can record the movie clip without voice.
Steps from 1-3 are the same as those for MOVIE CLIP
mode.
4. Press the Up button and the (
) icon will display
on the LCD monitor.
5. Press the shutter button and movie clip is recorded
for as long as the available recording time without voice.
6. To stop the recording, press the shutter button again.
ƈPausing while recording a movie clip (Successive Recording)
This camera allows you to temporarily stop during unwanted scenes, while recording a movie
clip. Using this function, you can record your favourite scenes into a movie clip without having
to create multiple movie clips.
ƃUsing Successive Recording
Steps from 1-2 are the same as those for MOVIE CLIP
mode.
3. Point the camera towards the subject and compose
the image by using the LCD monitor. Press the
shutter button and movie clips are recorded for as
long as the available recording time. Movie clips will
still be recorded if the shutter button is released.
[Successive recording of a movie clip]
4. Press the Pause button(
) to pause
recording.
5. Press the Pause button(
) again to resume the recording.
6. If you wish to stop recording, press the shutter button again.
ƈHow to use the Program mode
Selecting the automatic mode will configure the camera with optimal settings and you can
manually configure various functions.
1. Select the [FULL] sub menu on the [MODE] menu
(p.23).
2. Select the Program mode by pressing the M (Mode)
button (p.24).
3. Point the camera towards the subject and compose
the image by using the LCD monitor.
4. Press the shutter button to capture an image.
[PROGRAM mode]
ŝ27Ş
Starting the recording mode
ƈHow to use the Scene modes
Use the menu to easily configure optimal settings for a variety of shooting situations.
1. Select the [FULL] sub menu on the [MODE] menu (p.23).
2. Select the Scene mode by pressing the M (Mode) button (p.24).
3. Point the camera towards the subject and compose
the image by using the LCD monitor.
4. Press the shutter button to capture an image.
ſ The scene modes are listed below.
[NIGHT]
(
) : Use this for shooting still
images at night or in
other dark conditions.
[SCENE mode]
[PORTRAIT]
(
) : To take a picture of a person.
[CHILDREN]
(
) : To take a picture of fast moving objects, for example, children.
[LANDSCAPE] (
) : To take pictures of distant scenery.
[TEXT]
) : Use this mode to shoot a document.
(
[CLOSE UP]
(
) : Close-up shooting for small objects such as plants and insects.
[DAWN]
(
) : Daybreak scenes.
[SUNSET]
(
) : For taking pictures of sunsets.
[BACKLIGHT] (
) : Portrait without shadows caused by backlight.
[FIREWORKS] (
) : Firework scenes.
[BEACH&SNOW](
) : For ocean, lake, beach and snowscape scenes.
ŝ28Ş
Starting the recording mode
ƈHow to use the VOICE RECORDING mode
A voice recording can be recorded for as long as the available recording time of the memory
capacity allows. (Max: 1 hour)
1. In any mode with the exception of the Movie clip,
select the VOICE RECORDING mode by pressing
the Voice recording button twice.
2. Press the shutter button to record a voice.
- Press the shutter button once and voice is recorded
RECORD : SHUTTER
for as long as the available recording time (Max : 1
hour) allows. The recording time will be displayed on
the LCD monitor. Voice will still be recorded if the
[VOICE RECORDING mode]
shutter button is released.
- If you wish to stop recording, press the shutter button again.
- File type : WAV
ƃPausing while recording a voice recording
This camera allows you to temporarily stop during unwanted recording, while recording a
voice. Using this function, you can record your favorite voices into a voice recording file
without having to create multiple voice recording files.
1. Press the shutter button and voice is recorded for as long as the available recording time.
Voice will still be recorded if the shutter button is
released.
2. Press the Pause button(
) to pause recording.
3. Press the Pause button(
) again to resume the
RECORD :
recording.
4. If you wish to stop recording, press the shutter button
again.
[Pausing the voice recording]
INFORMATION
ƃA distance of 40cm between you and the camera (microphone) is the best distance to
record sound.
ƃIf the camera power is turned off while the voice recording is paused, the voice recording
is cancelled.
ŝ29Ş
Things to Watch Out for When Taking Pictures
ƈPressing the shutter button down half way
Lightly press the shutter button to confirm focus and flash battery charge.
Press the shutter button all way down to take the picture.
[Lightly press the shutter button]
[Press the shutter button]
ƈThe available recording time may vary depending on shooting conditions and camera settings.
ƈWhen the Flash Off or Slow synchro mode is selected in a low lighting condition, the camera
shake warning indicator (
) may appear on the LCD monitor. In this case, use a tripod,
support the camera on a solid surface or change the flash mode to flash shot mode.
ƈBacklight compensated shots : When taking an outdoor shot, avoid facing the sun, as the
image may be dark because of the strong backlight.
To take a picture against the sun, please use the
[BACKLIGHT] in the scene shooting mode (see page 28),
Fill-in flash (see page 37), Spot metering (see page 61), or
Exposure compensation (see page 52).
ƈAvoid obstructing the lens or the flash when you capture an image.
ƈUnder certain conditions the auto focus system may not perform as expected.
- When photographing a subject that has little contrast.
- If the subject is highly reflective or shiny.
- If the subject is moving at high speed.
- When there is strong reflected light, or when the background is very bright.
- When the subject matter has only horizontal lines or the subject is very narrow
(such as a stick or flagpole).
- When the surroundings are dark.
ŝ30Ş
Using the camera buttons to adjust the camera
ƈThe recording mode function can be set up by using the camera buttons.
POWER button
: When the camera is turned on , the power lamp will come on and then turn off.
ƃUsed for turning the camera’s power on/ off.
ƃIf there is no operation during the specified time, the
camera's power will be turned off automatically to save
battery life. Refer to page 98 for more information about the
auto power off function.
SHUTTER button
ƃUsed for taking an image or recording voice in the recording
mode.
ƃIn MOVIE CLIP mode
Pressing the shutter button down fully starts the process for
recording a movie clip. Press the shutter button once and
the movie clip is recorded for as long as the available
recording time in the memory allows. If you wish to stop
recording, press the shutter button again.
ƃIn STILL IMAGE mode
Pressing the shutter button down halfway activates the autofocus and checks the condition of
the flash.
Pressing the shutter down fully takes the image and stores the relevant data regarding the
shot. If you select voice memo recording, the recording will start after the camera has finished
storing the image data for 10 seconds.
ZOOM W / T button
ƃIf the menu is not displayed, this button works as the
OPTICAL ZOOM or DIGITAL ZOOM button.
ŝ31Ş
ZOOM W / T button
ƈThis camera has a 4.8X optical zoom and a 5X digital zoom function. Using both will offer a
total zoom ratio of 24X.
ſ The illustrations as shown below are for your information about using the W/ T button.
The pre-view images can be different with the illustrations.
ƃTELE Zoom
Optical zoom TELE
Digital zoom TELE
: Pressing the ZOOM T button. This will zoom into the subject i.e.
the subject will appear nearer.
: When the maximum (4.8X) optical zoom is selected, pressing the
ZOOM T button activates the digital zoom software. Releasing
ZOOM T button stops the digital zoom at the required setting.
Once the maximum digital zoom (5X) is achieved, pressing the
ZOOM T button will have no effect.
Pressing the
ZOOM T button
[ WIDE zoom ]
ƃWIDE Zoom
Optical zoom WIDE
Pressing the
ZOOM T button
[ TELE zoom ]
: Pressing the ZOOM W button. This will zoom out from the subject
i.e. the subject will appear further away. Pressing the ZOOM W
button continuously will set the camera to its minimum zoom
setting i.e. the subject appears at its furthest from the camera.
Pressing the
ZOOM W button
[ TELE zoom ]
Digital zoom WIDE
Optical zoom
Pressing the
ZOOM W button
[ Optical zoom 2X ]
[ WIDE zoom ]
: When the digital zoom is in operation, pressing the ZOOM W
button will reduce the digital zooming in steps.
Releasing ZOOM W button stops digital zooming.
Pressing the ZOOM W button will reduce the digital zoom and
then it will continue to reduce the optical zoom until the minimum
setting is reached.
Digital zoom
Pressing the
ZOOM W button
[ Digital zoom 5.0X ]
ŝ32Ş
[ Digital zoom 5.0X ]
Pressing the
ZOOM W button
[ TELE zoom ]
[ WIDE zoom ]
ZOOM W / T button
INFORMATION
ƃImages taken using the digital zoom may take a little longer for the camera to process.
Allow time for this to take place.
ƃYou may notice a decrease in image quality when using the digital zoom.
ƃTo view more clear digital zoom image, press the shutter button halfway at the maximum
(4.8X) optical zoom position and press the zoom T button again.
ƃThe digital zoom can’t be activated in the [NIGHT], [CHILDREN], [CLOSE UP], [TEXT]
and [FIREWORKS] scene modes.
ƃTake care not to press the lens, lens cover and camera by force. This may cause the
camera malfunction.
ŝ33Ş
Voice recording(
) / Voice memo(
) / UP button
ƈWhile the menu is showing, press the UP button to move up the submenu cursor.
When the menu is not displayed on the LCD monitor, the UP button operates as the voice
recording or voice memo button. You can record your voice or add your voice-over to a stored
still image. Refer to page 29 for more information about the voice recording.
ƃRecording a voice memo
1. Press the M (Mode) button to select a Recording mode with the exception of Movie clip
mode.
2. Press the Voice memo (
) button. If the voice memo indicator is displayed on the LCD
monitor, the setting is completed.
Pressing the Voice memo button
3. Press the shutter button and take a picture.
The picture is stored on the memory.
4. Voice memo will be recorded for ten seconds
from the moment the picture is stored. In the
middle of the voice recording, pressing the
shutter button will stop the voice memo.
STOP: SHUTTER
[Recording Voice Memo]
INFORMATION
ƃA distance of 40cm between you and the camera (microphone) is the best distance to
record sound.
ŝ34Ş
Macro(
) / Down button
ƈWhile the menu is showing, press the DOWN button to move from the main menu to a
submenu, or to move down the submenu cursor. When the menu is not showing, you can
use the MACRO/ DOWN button to take macro pictures. The distance ranges are shown
below. Press the Macro button until the desired macro mode indicator displays on the LCD
monitor.
[Auto focus - No icon]
[Macro (
)]
[Auto macro (
ƈTypes of focus modes and focus ranges (W: Wide, T: Tele)
Mode
Focus Type
Focus range
Auto (
Auto macro (
W : 5~Infinity
T : 14~Infinity
)
(Unit : cm)
)
Normal
W : 80~Infinity
T : 80~Infinity
)]
Program (
Macro (
)
W : 2~80
T : 14~80
)
Normal
W : 80~Infinity
T : 80~Infinity
ſ See the next page for the available focusing method, by recording mode.
INFORMATION
ƃWhen the macro mode is selected, it is possible that camera shake will occur. Take care
not to shake the camera.
ƃWhen you take a picture within 30cm in the Macro mode, select the FLASH OFF mode.
ŝ35Ş
Macro(
) / Down button
ƈAvailable focusing method, by recording mode ( O: Selectable , X: Not selectable, ∞: Infinity focus range)
Mode
Normal
O
O
O
Macro
O
X
O
Auto macro
X
O
X
SCENE
Mode
Normal
O
O
O
ū
X
X
ū
ū
O
ū
O
Macro
X
X
X
X
X
O
X
X
X
X
X
Auto macro
X
X
X
X
O
X
X
X
X
X
X
Focus lock
ƈTo focus on the subject positioned outside of the centre, use the focus lock function.
ƃUsing the Focus Lock
1. Ensure the subject is in the centre of the autofocus frame.
2. Press the SHUTTER button halfway. When the green auto focus frame lights up, it means
the camera is focused on the subject. Be careful not to press the SHUTTER button all the
way down to avoid taking an unwanted picture.
3. With the SHUTTER button still pressed down only halfway, move the camera to
recompose your picture as desired, and then press the SHUTTER button completely to
take the picture. If you release your finger from the SHUTTER button, the focus lock
function will be cancelled.
1. The image to be
captured.
ŝ36Ş
2. Press the SHUTTER
button halfway and focus
on the subject.
3. Recompose the picture
and fully depress the
SHUTTER button.
Flash (
) / Left button
ƈWhen the menu is displayed on the LCD monitor,
pressing the LEFT button makes the cursor shift to the
left tab.
ƈWhen the menu is not displayed on the LCD monitor,
the LEFT button operates as the FLASH (
) button.
ƃSelecting the flash mode
1. Press the M (Mode) button to select a Recording
[Selecting the Auto flash]
mode with the exception of Movie clip mode (p.24).
2. Press the Flash button until the desired flash mode
indicator displays on the LCD monitor.
3. A flash mode indicator will be displayed on the LCD monitor.
Use the correct flash to suit the environment.
ƃFlash range
(Unit : m)
AUTO
Macro
Normal
ISO
Auto macro
WIDE
TELE
WIDE
TELE
WIDE
TELE
0.8 ~ 3.0
0.8 ~ 2.0
0.3 ~ 0.8
0.3 ~ 0.8
0.3 ~ 3.0
0.3 ~ 2.0
INFORMATION
ƃIf you press the shutter button after selecting the Auto, Fill-in, Slow sychro flash, the first
flash fires to check the shooting condition (Flash range and Power ratio of flash).
Do not move until the second flash fires.
ƃUsing the flash frequently will reduce the life of the battery.
ƃUnder normal operating conditions the charging time for the flash is normally within 5
seconds. If the battery is weak, the charging time will be longer.
ƃDuring the continuous shot, AEB and movie clip mode, the flash function will not operate.
ƃTake photographs within the flash range.
ƃThe image quality is not guaranteed if the subject is too close or highly reflective.
ŝ37Ş
Flash (
) / Left button
ƃFlash mode indicator
Menu tab
Flash mode
Description
Auto flash
If the subject or background is dark, the camera flash will operate
automatically.
Auto &
Red eye
reduction
If a subject or background is dark, the camera flash will work
automatically and will reduce the red-eye effect by using the redeye reduction function.
Fill in flash
The flash fires regardless of available light.
The intensity of the flash will be controlled, according to the
prevailing conditions. The brighter the background or subject is,
the less intense the flash will be.
Slow synchro
The flash will operate in conjunction with a slow shutter speed in
order to obtain the correct exposure. When you take an image in
a condition with poor light, the camera shake warning indicator
(
) will display on the LCD monitor.
We recommend using a tripod for this function.
Flash off
The flash does not fire. Select this mode when capturing images
in a place or situation where flash photography is prohibited.
When you capture an image in a poorly lit condition, the camera
shake warning indicator (
) will display on the LCD monitor.
We recommend using a tripod for this function.
ƃAvailable flash mode, by recording mode
ŝ38Ş
X
X
O
X
X
X
X
X
X
X
X
X
X
O
X
O
O
X
O
O
X
X
X
X
X
X
X
X
X
X
O
X
X
X
X
X
X
X
X
O
X
X
X
X
O
O
X
X
X
X
X
X
X
X
X
X
O
O
O
O
O
O
O
O
O
O
O
X
O
X
Self-timer(
) / Remote (
) / Right button
ƈ When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor
shift to the right tab. The right button can also be used to move to a sub menu to select a
different setting.
ƈ When the menu is not displayed on the LCD monitor, the RIGHT button operates as the Selftimer (
) and Remote (
) button. This function is used when the photographer would
also like to be in the image.
ƃ Using the self-timer and remote control
1. Press the M (Mode) button to select a still image mode or movie clip mode (p.24).
2. Press the SELF-TIMER button until the desired mode indicator displays on the LCD
monitor. A self-timer icon or remote control icon appears on the LCD monitor.
[Selecting the 2 SEC self-timer]
[Selecting the remote control]
- Selecting a self-timer : When you press the Shutter button, the picture will be taken after the
specified time has elapsed and the self-timer function will be canceled.
- Selecting a remote mode : Pressing the shutter button of remote control will allow an interval of
2 seconds before the image is taken. In the remote mode, the
shutter button of the camera canŖt be activated. After taking a
picture, the remote mode will be maintained. But, pressing the
Power button, Mode button, Play mode button and Self-timer button
will cancel the remote mode.
ƃDescription of Self-timer/ Remote mode
Icon
Mode
2s
10s
Double
Remote
Description
Pressing the shutter button will allow an interval of 2 seconds
before the image is taken.
Pressing the shutter button will allow an interval of 10 seconds
before the image is taken.
A picture will be taken after about 10 seconds and 2 seconds
later a second picture will be taken.
You can take a picture by remote control instead of using the
shutter button of the camera.
ŝ39Ş
Self-timer(
) / Remote (
) / Right button
ƃRemote control range
When you take a picture by using the remote control, refer to the
illustrations shown alongside about the remote control range.
[ Shutter button on the
remote control ]
ƃReplacing battery for the remote control
Make sure the + polarity is toward the top and the - polarity is toward the bottom while
installing battery for the remote control. Replace battery for the remote control in the local
service centre. Use the CR 2025 3V battery.
INFORMATION
ƃWhen taking a picture using the self-timer, the self-timer lamp works as follows:
2 second self-timer setting : The self-timer lamp blinks at 0.25 second interval for 2
seconds.
10 second self-timer setting : The self-timer lamp blinks at 1 second interval for the first 8
seconds. It blinks at 0.25 second interval for the remaining
2 seconds.
ƃIf you operate the Self-timer button and Play mode button during the self-timer operation,
the self-timer function is canceled.
ƃUse a tripod to prevent the camera from shaking.
ƃIn Movie Clip mode, only the 10s self-timer and remote will work.
ŝ40Ş
MENU / OK button
ƈMENU button
- When you press the MENU button, a menu related to each camera mode will be displayed
on the LCD monitor. Pressing it again will return the LCD to the initial display.
- A menu option can be displayed when the following are selected :
MOVIE CLIP and STILL IMAGE mode. There is no menu available when the VOICE
RECORDING mode is selected.
SIZE
2592X1944
Pressing the MENU button
[Menu off]
4M
3M
2M
1M
2272X1704
2048X1536
1600X1200
1024X768
[Menu on]
ƈOK button
- When the menu is displayed on the LCD monitor, this button is used for shifting the cursor
to the sub menu or for confirming data.
M (Mode) button
ƈYou can turn on the camera with this button.
ƈYou can select the desired recording mode. The selectable recording modes are different
from what you selected sub menu in the [MODE] menu.
- [STILL & MOVIE] : A recording mode selected in the [MODE SET] menu, Movie clip mode
- [FULL]
: Auto, Movie clip, Program, Scene modes
- [CUSTOM]
: Modes set as on in the [MODE SET] menu
ƃHow to use the mode button : In case of [STILL & MOVIE] sub menu and Auto mode
[Pressing the M button]
[Auto mode]
[Movie clip mode]
ŝ41Ş
M (Mode) button
ƃHow to use the mode button : In case of [FULL] sub menu and Auto mode
[Auto mode]
[Pressing the Mode button]
[Pressing the Right button]
PROGRAM
SET:OK
[Program mode]
AUTO
SET:OK
[Mode selection menu]
MOVIE
[Pressing the Left button]
SET:OK
[Movie cliip mode]
[Pressing the Up button]
NIGHT
PORTRAIT
[Pressing the Left/ Right button]
SET:OK
[Scene mode]
SET:OK
[Selecting a scene mode]
ſ Press the Mode button and the mode selection menu will disappear.
ŝ42Ş
M (Mode) button
ƃHow to use the mode button : In case of [CUSTOM] sub menu and Auto mode
ſ The illustrated images and modes are for your
information.
They can be changed as the [MODE SET] menu
setting.
[Auto mode]
NIGHT
[Pressing the Mode button]
[Pressing the Up button]
SET:OK
[Night scene mode]
AUTO
SET:OK
[Mode selection menu]
PORTRAIT
[Pressing the Down button]
SET:OK
[Portrait scene mode]
[Pressing the Right button]
PROGRAM
SET:OK
[Program mode]
ſ Press the Mode button and the mode selection menu will disappear.
ŝ43Ş
E (Effect) button
ƈIt is possible to add special effects to your images by using this button
ƈStill image mode : You can select the colour, focus, composite and frame menus.
Movie clip mode : You can select the colour and stabiliser menus.
ƈAvailable Effects, by recording mode (O : Selectable X : Not selectable)
O
O
O
O
O
O
O
X
X
O
X
X
X
X
X
X
O
X
X
X
X
X
X
O
X
X
X
X
O
X
X
X
X
X
X
ſ This button will not operate in the Voice recording mode and some scene modes (Night, Text,
Sunset, Dawn, Backlight, Fireworks and Beach & Snow)
If a special effect is selected, the rest special effect (FOCUS, COMP. FRAME) functions set
before are cancelled automatically.
ſ If you select a TIFF file format, only the COLOR menu can be selected.
ƈEven if the camera is turned off, the special effect setting will be preserved.
To cancel the special effect, select the [OFF] sub menu of each menu.
Special Effect : Colour
ƈBy using the camera’s digital processor, it is possible to add special effects to your images
1. Press the E button in the still image mode or Movie clip mode.
2. Select the COLOR menu by pressing the Left/ Right button.
ŝ44Ş
NORMAL
NORMAL
[Still image mode]
[Movie clip mode]
Special Effect : Colour
3. Select a desired sub menu by pressing the Up/Down button and press the OK button.
: No effect is added to the image
: Captured images will be stored in black and white.
: Captured images will be stored in a sepia tone (a gradient of yellowish brown colours).
: Captured images will be stored in a red tone.
: Captured images will be stored in a green tone.
: Captured images will be stored in a blue tone.
: Save the image in negative mode.
4. Press the shutter button to capture an image.
Special Effect : Preset focus frames
ƈYou can make the subject stand out from its surroundings.
The subject will be sharp and in focus while making the
rest out of focus.
1. Press the E button in the program mode.
2. Select the FOCUS menu by pressing the Left/ Right
button.
3. Select a desired sub menu by pressing the Up/ Down
button and press the OK button.
[Range 1]
[Range 2]
[Range 3]
[Range 4]
4. The preset focus frame will appear.
Press the shutter button to capture an image
ŝ45Ş
Special Effect : Composite shooting
ƈYou can combine 2 ~ 4 different shots in a still image.
1. Press the E button in the program mode.
2. Select the COMP. menu by pressing the Left/ Right button.
3. Select a desired sub menu by pressing the Up/ Down
button and press the OK button.
-
: cancels the composite shooting
-
: 2 different shots are combined in a still image.
-
: 3 different shots are combined in a still image.
-
: 4 different shots are combined in a still image.
-
: 2 different panorama shots are combined in a still image.
COMP.
4. The number of frames you selected in step 3 is displayed on the LCD monitor.
Press the shutter button to start the composite shooting
ſ Selecting 2 composite shooting
Pressing the
shutter button
[Ready for taking]
Pressing the
shutter button
[First shot]
[Second shot]
[The final picture]
5. After taking the last shot, the image will be saved.
ſ You can use the flash button, self-timer button, macro button, voice memo button and the
Zoom W/T button during the composite shooting.
ſ If you press the camera buttons (Play mode button, M button, E button, Menu button and
Wide button) during the composite shots or press the voice recording button twice, each
mode of the camera buttons is executed. The images captured before will be deleted.
ſ The voice memo will start after taking the last composite shooting.
ŝ46Ş
Special Effect : Composite shooting
ƃChanging a part of composite shot before taking the last shot
Before taking the last composite shot, you can change a part of composite shot.
1. During the composite shots, press the +/- button.
2. A previous image will be deleted and new frame will display.
If there is an image taken before, press the +/- button again and a previous image will be
deleted again.
Pressing the +/- button
[Before taking the 3rd shot]
[Moving backward to the 2nd shot]
3. Press the shutter button to capture a new image.
ŝ47Ş
Special Effect : Photo Frame
ƈYou can add 5 types of frame-like borders to a still image you want to capture.
1. Press the E button in the program mode.
2. Select the FRAME menu by pressing the Left/ Right
button.
3. Select a desired sub menu by pressing the Up/ Down
button and press the OK button.
-
: The photo frame will not be added.
[Frame 1]
[Frame 2]
[Frame 4]
[Frame 5]
4. The photo frame will appear.
Press the shutter button to capture an image
ŝ48Ş
[Frame 3]
Movie Clip frame stabiliser
ƈThis function helps stabiliser images captured during movie recording.
You can select this menu only in the MOVIE CLIP mode.
ƃHow to use this function
1. Press the E button in the Movie clip mode.
2. Select the STABIL. menu by pressing the Left/ Right
button.
3. Select a desired sub menu by pressing the Up/
Down button and press the OK button.
: Movie clip frame stabiliser function becomes
disabled.
: Prevents camera shake during movie recording.
The recording frame range will become narrower than when you select the
menu. Pre-view frames may not display smoothly on the LCD monitor.
INFORMATION
ƃWhen you select the
on the movie clip size.
sub menu, the movie clip frame range will be narrow depending
ŝ49Ş
+/- button
ƈ You can use the +/- button to adjust the values for the RGB, ISO, white balance, exposure
compensation and Long Time shutter speed.
Main menu
Sub menu
RGB
R (Red), G (Green), B (Blue)
ISO
AUTO, 50, 100, 200, 400
WHITE BALANCE
AUTO, DAYLIGHT, CLOUDY,
FLUORESCENT H,
FLUORESCENT L, TUNGSTEN,
CUSTOM.
Exposure compensation
-2.0 ~ 0.0 ~ +2.0 (0.3EV steps)
LT
Shutter speed/ Aperture Value
(Changed by zoom rate)
Available camera mode
ƈ RGB : Allows the user to adjust the R (Red), G (Green), and B (Blue) values of the images to
be captured.
ƃ Setting RGB Values
1. Press the +/- button, and then use the UP and DOWN
buttons to select the RGB icon (
).
The RGB menu bar will appear as shown.
2. Use the UP/ DOWN/ LEFT and RIGHT buttons to
select the desired RGB value.
- Up/ Down Button : Navigates between R, G, and B
icons.
- Left/ Right Button : Changes value of each icon.
3. When you press the +/- button again, the value you set will be saved and RGB setup
mode will end.
ŝ50Ş
+/- button
ƈ ISO : You can select the ISO sensitivity when taking pictures.
The speed or specific light-sensitivity of a camera is rated by ISO numbers.
ƃ Selecting an ISO Sensitivity
1. Press the +/- button, and then use the UP and
DOWN buttons to select the ISO icon(
). The
ISO menu bar will appear as shown.
2. Use the LEFT and RIGHT buttons to select the
desired ISO sensitivity value.
- AUTO : The camera's sensitivity is automatically
changed by variables such as lighting value or
subject brightness.
- 50, 100, 200, 400 : You can increase the shutter speed while the same amount of light is
present, by increasing the ISO sensitivity. However, the image may be saturated in high
luminance. The higher the ISO value, the higher the camera’s sensitivity to light is and
therefore the greater its capacity to take pictures in dark conditions. However, the noise
level in the image will increase as the ISO value increases, making the image appear
coarse.
3. When you press the +/- button again, the value you set will be saved and ISO setup mode
will end.
ƈ White balance : The white balance control allows you to adjust the colours to appear more
natural looking.
ƃ Selecting a White Balance
1. Press the +/- button, and then use the UP and DOWN
buttons to select the white balance icon (
).
The white balance menu bar will appear as shown.
2. Use the LEFT and RIGHT buttons to set the white
balance to the desired value. The value you set will
be displayed on the LCD monitor.
AUTO
: The camera automatically
selects the appropriate white balance settings, depending on the
prevailing lighting conditions.
DAYLIGHT
: For taking images outside.
CLOUDY
: For taking images under a cloudy and overcast sky.
Fluorescent H
: For shooting under daylight fluorescent types of three-way
fluorescent lighting.
Fluorescent L
: Shooting under white fluorescent lighting.
TUNGSTEN
: For shooting under tungsten (standard light bulb) lighting.
CUSTOM
: Allows the user to set the white balance according to the shooting
condition.
Different lighting conditions may cause a colour cast on your images.
3. Press the +/- button again. The value you set will be saved and White Balance setup mode
will end.
ŝ51Ş
+/- button
ƃ Using the Custom White Balance
White balance settings may vary slightly depending on the shooting environment.
You can select the most appropriate white balance setting for a given shooting environment
by setting up the custom white balance.
1. Select the CUSTOM (
) menu of the White
Balance.
2. Place a sheet of white paper in front of the camera so
that the LCD monitor shows only white, and then
press the SHUTTER button.
3. Your custom white balance value is stored.
- The custom white balance value will be applied,
starting with the next picture you take.
- The user configured white balance will be remain
effective until it is overwritten.
[ White paper ]
ƈ Exposure compensation : This camera automatically adjusts the exposure according to the
ambient lighting conditions.
You can also select the exposure value by using the +/- button.
ƃ Compensating Exposure
1. Press the +/- button, and then use the UP and DOWN
buttons to select the exposure compensation icon
(
). The exposure compensation menu bar will
appear as shown.
2. Use the LEFT and RIGHT buttons to set the desired
exposure compensation factor.
3. Press the +/- button again. The value you set will be
saved and the Exposure Compensation setup mode will close.
If you change the exposure value, the exposure indicator (
) will be displayed on the
bottom of the LCD monitor.
ſ A negative exposure compensation value reduces the exposure.
Note that a positive exposure compensation value increases the exposure and the LCD
monitor will appear white or you may not get good pictures.
ŝ52Ş
+/- button
ƈ Long Time shutter : This camera automatically adjusts the shutter speed and aperture values
to the shooting environment. However, in NIGHT SCENE mode, you can
set the shutter speed and aperture values to your preference.
ƃ Adjusting the shutter speed and aperture values
1. Select the [NIGHT] scene mode. (p.24)
2. Press +/- button and Long Time shutter menu
(LT, For selecting shutter speed and aperture value)
will be displayed.
3. Configure the Long Time shutter value with the up/
down/ left/ right button.
Up/ Down Button : Select the Aperture/ Shutter speed
Left/ Right Button : Change the value. Available
aperture value options, depending on zoom step will be displayed on
the menu.
4. Press the +/- button again. The value you set will be saved and the mode will switch to
NIGHT SCENE mode. Press the SHUTTER button to take the picture.
ƈ Aperture values and shutter speeds changed by zoom scale are listed below.
Supported Aperture Values : AUTO, WIDE : F3.3 ~ F5.4, TELE : F4.8 ~ F9.3
Supported Shutter Speeds : AUTO, 1 ~ 16S
Aperture Value
Large/Small
(Press left button)
Large/Small
(Press right button)
F 3.3
1S
Fast/Slow
(Press left button)
Fast/Slow
(Press right button)
Shutter Speed
ŝ53Ş
Wide button
ƈ You can select the wide angle mode or normal angle mode by using this button. When you
select the wide angle mode the LCD monitor size will change from 4:3 to 16:9 screen size.
Pressing the Wide button
[Normal angle mode]
[Wide angle mode]
ſ When you select the wide angle mode, sub menus of the [SIZE] menu are changed. For
details of the sub menu changes please refer to the table below.
ŝ54Ş
Size
Normal angle mode
Wide angle mode
5M
2592Ŧ1944
2944Ŧ1656
4M
2272Ŧ1704
2688Ŧ1512
3M
2048Ŧ1536
2304Ŧ1296
2M
1600Ŧ1200
1792Ŧ1008
1M
1024Ŧ768
1280Ŧ720
VGA
640Ŧ480
768Ŧ432
Using the LCD monitor to adjust the camera settings
ƈYou can use the menu on the LCD monitor to set up recording functions. In any mode with
the exception of VOICE RECORDING mode, pressing the MENU button displays the menu
on the LCD monitor.
INFORMATION
ƃThe menu will not be displayed on the LCD monitor in the following circumstances:
- When another button is being operated.
- While image data is being processed.
- When there is no battery capacity.
ƈThe following functions are available, depending on the mode you have selected.
The items indicated by
are default settings.
Menu tab
Main menu
Sub menu
Camera working mode
Page
STILL&MOVIE
FULL
MODE
p.57
CUSTOM
MODE SET
AUTO
PROGRAM
MOVIE
NIGHT
PORTRAIT
CHILDREN
LANDSCAPE
TEXT
CLOSE UP
DAWN
SUNSET
BACKLIGHT
p.58
FIREWORKS BEACH&SNOW
SIZE
(Still image)
(Normal angle)
2592X1944
2272X1704
2048X1536
1600X1200
1024X768
640X480
2944X1656
2688X1512
2304X1296
1792X1008
1280X720
768X432
p.59
SIZE
(Still image)
(Wide angle)
ŝ55Ş
Using the LCD monitor to adjust the camera settings
Menu tab
Main menu
Sub menu
Camera working mode
SIZE
(Movie clip)
(Normal angle mode)
640X480
320X240
160X120
-
SIZE
(Movie clip)
(Wide angle mode)
640X360
384X216
Page
p.59
256X144
TIFF
SUPER FINE
FINE
NORMAL
30 FPS
15 FPS
MULTI
CENTER-WEIGHTED
SPOT
-
SINGLE
CONTINUOUS
AEB
-
SOFT
NORMAL
VIVID
-
QUALITY
FRAME RATE
p.60
p.61
METERING
SHOOTING
p.61
SHARPNESS
p.62
FULL OSD
OSD
INFORMATION SAVE MODE
BASIC OSD
p.62
-
SAVE
(MYSET)
MYSET1
MYSET2
MYSET3
-
LOAD
(MYSET)
MYSET1
MYSET2
MYSET3
-
p.63
ſ Menus are subject to change without prior notice.
ſ The TIFF file format can't be selected in the Auto mode.
ŝ56Ş
How to use the menu
1. Turn on the camera and press the MENU button. A menu for each camera mode appears.
However, there is no menu for Voice Recording mode (
).
2. Use the LEFT and RIGHT buttons to navigate through the menus.
SIZE
2592X1944
5
5
5
5
Press the LEFT
or RIGHT button.
QUALITY
<1..
2272X1704
2048X1536
1600X1200
1024X768
TIFF
SUPER FINE
Press the LEFT
or RIGHT button.
METERING
MULTI
CENTER-WEIGHTED
SPOT
FINE
NORMAL
3. Use the UP and DOWN buttons to select a sub menu.
SIZE
2592X1944
5
5
5
5
2272X1704
2048X1536
1600X1200
1024X768
Press the UP or
DOWN button.
SIZE
5
5
5
5
2592X1944
Press the UP or
DOWN button.
SIZE
2272X1704
5
5
2048X1536
1600X1200
1024X768
5
5
2592X1944
2272X1704
2048X1536
1600X1200
1024X768
4. Select a sub menu, and then the value you set will be saved. Press the MENU button and
the menu will disappear.
Mode
ƈYou can select the desired working mode by the M (Mode) button located on the back of the
camera and [MODE] menu. Auto, Program, Movie clip, Scene (Night, Portrait, Children,
Landscape, Text, Close-up, Dawn, Sunset, Backlight, Fireworks, Beach & Snow) camera
modes are available.
- [STILL & MOVIE] : A still image mode that was selected on
the [MODE SET] menu and movie clip
mode can be selected.
- [FULL]
: Auto, Program, Movie clip and Scene
modes can be selected.
- [CUSTOM]
: You can select modes set as on in the
[MODE SET] menu
MODE
STILL & MOVIE
FULL
CUSTOM
ŝ57Ş
Mode set
ƈYou can select the desired recording mode.
ƈIf you select the [CUSTOM] sub menu in the
[MODE] menu, you can select modes set as on in this menu
by pressing the M button.
- The maximum custom modes you can select are 7 and the
minimum custom modes are 3.
- If you select over 7 custom modes, the menus are set as
off automatically from the lower placed sub menu.
[AUTO]
[PROGRAM]
[MOVIE]
[NIGHT]
[PORTRAIT]
[CHILDREN]
[LANDSCAPE]
[TEXT]
[CLOSE UP]
[DAWN]
[SUNSET]
[BACKLIGHT]
[FIREWORKS]
[BEACH&SNOW]
MODE SET
AUTO
ON
PROGRAM
ON
MOVIE
ON
NIGHT
ON
PORTRAIT
ON
EXIT:MENU
MOVE:
: For shooting basic still image
: You can manually configure all functions.
: For taking a movie clip
: Use this for shooting still images at night or in other dark conditions.
: To take a picture of a person.
: To take a still picture of moving children.
: Scenery with green woods or blue sky.
: Use this mode to shoot a document.
: Close-up shooting for small objects such as plants and insects.
: Daybreak scenes.
: For taking pictures of sunsets.
: Portrait without shadows caused by backlight.
: Firework scenes.
: For ocean, lake, beach and snowscape scenes.
INFORMATION
ƃWhen [NIGHT], [LANDSCAPE], [TEXT], [CLOSE UP], [DAWN], [SUNSET] and
[FIREWORKS] scene mode are selected, it is possible that camera shake will occur. In
this case, you should use a tripod.
ŝ58Ş
Size
ƈYou can select the image size appropriate for your application.
Mode
Still image mode
Movie clip mode
1KWV
5M
4M
3M
2M
1M
VGA
640
320
120
Size
2592X
2272X
2048X
1600X
1024X
640X
640X
320X
160X
(Normal angle)
1944
1704
1536
1200
768
480
480
240
120
Size
2944X
2688X
2304X
1792X
1280X
768X
640X
384X
256X
(Wide angle)
1656
1512
1296
1008
720
432
360
216
144
SIZE
SIZE
640 X 480
2592X1944
5
5
5
5
2272X1704
2048X1536
1600X1200
1024X768
[ STILL IMAGE mode ]
320 X 240
160 X 120
[ MOVIE CLIP mode ]
INFORMATION
ƃThe higher the resolution, the lower the number of available shots will be because high
resolution images require more memory than lower resolution images.
ŝ59Ş
Quality / Frame rate
ƈYou can select the compression ratio appropriate for your application of the captured images.
The higher the compression ratio, the lower the picture quality.
Mode
STILL IMAGE mode
MOVIE CLIP mode
Icon
TIFF
Sub menu
TIFF
SUPER FINE
FINE
NORMAL
30FPS
15FPS
File Format
tif
jpeg
jpeg
jpeg
mp4
mp4
<1..
QUALITY
TIFF
SUPER FINE
FINE
FRAME RATE
30 FPS
15 FPS
NORMAL
[STILL IMAGE mode]
[MOVIE CLIP mode]
INFORMATION
ƃ The TIFF file can’t be rotated, resized and trimmed.
ƃ The TIFF file format provides the best quality.
However, large file size reduces number of available pictures to take and increases
saving time to the memory card.
ƃ [PROCESSING!] message is displayed while saving a TIFF file to the memory card.
ƃ The TIFF file format can't be selected in the Auto mode.
ƃ This file format complies with the DCF (Design rule for Camera File system).
ƃ JPEG (Joint Photographic Experts Group): JPEG is the image compression standard
developed by the Joint Photographic Experts Group. This type of compression is most
commonly used for compressing photos and graphics because it can compress the files
efficiently without damaging the data.
ŝ60Ş
Metering
ƈ If you cannot obtain suitable exposure conditions, you can change the metering method to
take brighter pictures.
[MULTI] : Exposure will be calculated based on an average
of the available light in the image area. However,
METERING
the calculation will be biased towards the centre of
MULTI
CENTER-WEIGHTED
the image area. This is suitable for general use.
SPOT
[CENTER-WEIGHTED] : Exposure will be calculated based
on an average of the available light
in the image area. However, the
[ PROGRAM mode ]
calculation will be biased towards
the centre of the image area. This
is suitable for taking a picture of small object like a flower or insects.
[SPOT] : Only the rectangular area in the centre of the LCD monitor will be metered for light.
This is suitable when the subject in the centre is exposed correctly, regardless of the
back lighting.
ſ If the subject is not the centre of the focus area, do not use the spot metering as this may
result in an exposure error. In this circumstance, It is better to use exposure compensation.
Continuous shot
ƈ You can select continuous shot, and AEB (Auto Exposure Bracketing).
- [SINGLE]: Take one picture only
- [CONTINUOUS]: Images will be taken continuously until the
SHOOTING
shutter button is released. The shooting capacity depends on
SINGLE
the memory (Max : 4 shots).
CONTINUOUS
AEB
- [AEB] : Take three pictures in a series in different exposures:
short exposure (-0.5EV), standard exposure (0.0EV) and
over exposure (+0.5EV). Use the mode if it is hard to decide
[ PROGRAM mode ]
exposure of the object.
ſ High resolution and picture quality increases file saving time, which increases stand-by
time.
ſ If the [CONTINOUS] or [AEB] sub menu is selected, the flash will be off automatically.
ſ If less than 3 pictures are available in the memory, the AEB shooting is not available.
ſ It is best to use a tripod for the AEB shooting as the time to save each image file is longer
and the blurring caused by camera shake may occur.
ſ When TIFF is selected, continuous and Auto Exposure Bracketing can not be selected.
ŝ61Ş
Sharpness
ƈYou can adjust the sharpness of the picture you want to take.
You cannot check the sharpness effect on the LCD monitor
before you take a picture, because this function is applied
only when the captured image is stored on the memory.
Sub menu
Icon
SHARPNESS
SOFT
NORMAL
VIVID
Description
The edges of the image are softened.
SOFT
This effect is suitable for editing images on your PC.
The edges of the image are sharp.
NORMAL
This is suitable for printing.
VIVID
The edges of the image are emphasized.The edges will appear
sharp, but noise may occur in the recorded image.
OSD(On Screen Display) information
ƈIn any mode with the exception of VOICE RECORDING
mode, you can check the recording status in the LCD
OSD INFORMATION
FULL OSD
monitor.
BASIC OSD
ƈIdle mode : If you select the [SAVE MODE] and the camera
SAVE MODE
isn't operated during the specified time(about
30 SEC.), the camera power will be idle (LCD
monitor : OFF, Camera status lamp : Blinking)
automatically.
- To use the camera again, press any of the camera buttons except the power button.
- If there is no operation during the specified time, the camera power will be turned off
automatically to save battery life. Refer to page 98 for more information about the auto
power off function.
[Full information mode]
ŝ62Ş
[Basic information mode]
Save / Load a specific camera configuration (MySET)
ƈ Use the MySET mode to save frequently used camera settings (Save Myset) and use it later
(Load Myset)
ƃ Saving the camera configuration :
1. Use the camera buttons and menu to set desired camera
configuration.
MYSET
2. Select the Program mode and press the Menu button.
MYSET1
SAVE
MYSET2
LOAD
3. Press the Left/Right buttons to select the [MYSET] menu tap.
MYSET3
4. Select the [SAVE] menu by pressing the Up / Down button
and press the Right button.
BACK:
SET:OK
5. Press the Up/Down buttons to select desired MySET slot
[ PROGRAM mode ]
number to save.
6. Press the OK button to save the current configuration.
ƃ Loading the saved camera configuration:
1. Select the Program mode and press the Menu button.
2. Press the Left/Right buttons to select the [MYSET] menu
MYSET
tap.
SAVE
MYSET1
MYSET2
LOAD
3. Select the [LOAD] menu by pressing the Up / Down
MYSET3
button and press the Right button.
4. Press the Up/Down buttons to select desired MySET slot
BACK:
SET:OK
number to load.
[ PROGRAM mode ]
5. Press the OK button to set the camera configuration as
saved in the MySET slot.
* The current MySET slot number is displayed in the top left of the LCD.
INFORMATION
ƃ Saving is available for the following camera functions.
Functions using the camera buttons - Macro, flash, white balance, ISO, RGB, Exposure
value, Aperture value and Shutter speed.
Functions using the menu screen - Size, quality, metering, effect, sharpness and
continuous shot.
ŝ63Ş
Starting play mode
ƈIf the memory card is inserted in the camera, all the camera functions apply only to the
memory card.
ƈIf the memory card is not inserted in the camera, all the camera functions apply only to the
internal memory.
ƈIf you have turned on the camera by pressing the POWER button, you can press the PLAY
MODE button once to switch to Play mode and press it again to switch to Recording mode.
ƈYou can turn the power on with the play mode button. The camera is turned on in play mode.
Press the play mode button again and the camera will be turned off.
ƈYou can set up the PLAY mode function by using the camera buttons and LCD monitor.
ƃPlaying back a still image
1. Select the PLAY mode by pressing the play
mode button (
).
2. The last image stored on the memory is
displayed on the LCD monitor.
3. Select an image that you want to play back by
pressing the LEFT/ RIGHT button.
ſ Press and hold the Left or Right button to fast
forward the images played.
INFORMATION
ƃManner mode : Pressing the play mode button for more than 3 seconds changes the
buzzer and start-up sound setting to OFF, even though you may have set these to ON.
ƃLightly press the shutter button in Play mode to switch to the currently set shooting mode.
ŝ64Ş
Starting play mode
ƃPlaying back a movie clip
Steps from 1-2 are the same as those to play back a
still image.
3. Select the recorded movie clip that you want to play
back by using the LEFT/ RIGHT button. If you select
a movie clip, the movie clip indicator (
) will be
displayed on the LCD monitor.
4. Press the play & pause button (
) to play back
a movie clip file.
- To pause a movie clip file while playing it back,
press the play & pause button again.
- Pressing the play & pause button again will cause
the movie clip file will restart.
- To rewind the movie clip while it is playing, press the
LEFT button. To fast forward the movie clip, press
the RIGHT button.
- To stop playback of the movie clip, press the play & pause button, and then press the
LEFT or RIGHT button.
ƈMovie clip capture function : capture still images from the movie clip.
ƃHow to capture the movie clip
Steps 1-2 are the same as those for playing back a still
image.
3. Select the recorded movie clip that you want to play
back by using the LEFT/ RIGHT button.
4. Press the Play/ Pause button to play the movie clip
5. Press the Play/ Pause button while playing the movie
clip. Then press the E button.
6. The paused movie clip is saved in a new file name.
ſ The captured movie clip file has same size as the
original movie clip.
- Normal angle mode : 640X480, 320X240, 160X120
- Wide angle mode : 640X360, 384X216, 256X144
TRIM : T
CAPTURE:E
[Paused]
[Pressing the E button]
ŝ65Ş
Starting play mode
ƈOn camera movie trimming : You can extract desired frames of movie clip during the movie
clip play back.
1. Select a desired movie clip in the play mode.
2. Play back the movie clip by pressing the Play &
Pause button.
3. Press the Pause button at the point of the movie clip
that you want to start extracting.
4. Press the zoom T button.
5. Press the Play & Pause button and the extracted
range will be displayed on the status bar.
TRIM : T
CAPTURE:E
6. Press the Play & Pause button once more at the
point where you wish the extracted file to stop.
TRIM : T
7. Press the zoom T button and a confirmation window
will display.
8. Select a desired sub menu by pressing the Up/
Down botton and press the OK button.
[TRIM]
: the extracted file will be saved.
[CANCEL] : cancels the extracting movie clip
TRIMMING?
TRIM
CANCEL
CONFIRM:OK
INFORMATION
ƃIf the time line bar passes by the start point by pressing the REW(Left) button, the first
frame of the movie clip will display.
ƃIf you doesn’t specify the ending point of the movie clip, the trimming confirmation window
will display at the point of the last frame.
ŝ66Ş
Starting play mode
ƃPlaying back a recorded voice
Steps from 1-2 are the same as those to play back a
still image.
3. Select the recorded voice that you want to play back
by using the LEFT/ RIGHT button. If you select a
recorded voice file, the voice indicator (
) will be
displayed on the LCD monitor.
4. Press the play & pause button (
) to play back
a recorded voice file.
- To pause a recorded voice file, while playing it back, press the play & pause button again.
- To resume playback of the voice file, press the play & pause button.
- To rewind the voice file while it is playing, press the LEFT button.
To fast forward the voice file, press the RIGHT button.
- To stop playback of the voice file, press the play & pause button, and then press the
LEFT or RIGHT button.
ŝ67Ş
LCD monitor indicator
ƈThe LCD monitor displays shooting information about the displayed image.
‫ۀ‬
‫ڹ‬
‫ں‬
‫ڻ‬
‫ڼ‬
‫ڽ‬
‫ھ‬
‫ڿ‬
No.
Description
Icon
1
Play mode
-
2
Battery
p.17
3
Movie clip / Voice memo
-
4
Protect indicator
p.85
5
DPOF indicator
p.86
6
Remote control indicator
-
7
Memory card indicator
-
8
Folder name and Stored image number
100-0012
Page
-
ƈ Select the [IMAGE INFORMATION] sub menu of the [OSD INFORMATION] menu and you
can check the recording information.
SIZE
AV
TV
ISO
FLASH
DATE
ŝ68Ş
:
:
:
:
:
:
2592X1944
F3.3
1/60
75
OFF
2005/08/01
SIZE
AV
TV
ISO
FLASH
DATE
: 2592X1944
: F3.3
: 1/60
: 75
Size
Aperture value
Shutter speed
ISO sensitivity
: OFF
Whether or not the flash is used
: 2005/08/01 Recording date
Using the camera buttons to adjust the camera
ƈIn Play mode, you can use the buttons on the camera to conveniently set up the Play mode
functions.
Thumbnail(
)/ Enlargement(
) button
ƃYou can view multiple pictures, enlarge a selected picture, and crop and save a selected area
of an image.
ƃThumbnail display
1. While an image is displayed full screen, press the
thumbnail button.
2. The thumbnail display will highlight the image that had
been showing at the time the thumbnail mode was
selected.
3. Press the 5 function button to move to a desired image.
4. To view an image separately, press the enlargement
button.
Pressing the thumbnail
button(
)
Pressing the enlargement
button(
)
Highlighted image
[ Normal display mode ]
[ Thumbnail display mode ]
ƃImage enlargement
1. Select an image that you want to enlarge and press the enlargement button.
2. Different parts of the image can be viewed by
pressing the 5 function button.
3. Pressing the thumbnail button will zoom back to the
original full sized image.
- You can tell whether the image displayed is an
enlarged view by checking the image enlargement
indicator shown at the bottom left of the LCD
monitor. (If the image is not an enlarged view, the
indicator will not be displayed.) You can also check
the area of enlargement.
- Movie clips and WAV files can’t be enlarged.
- If an image is enlarged, a loss of quality may occur.
ŝ69Ş
Thumbnail(
) / Enlargement(
) button
ƃThe maximum enlargement rate in proportion to the image size.
Image size
5M
4M
3M
2M
1M
VGA
Maximum Normal angle
enlargement
Wide angle
rate
X9.0
X6.45
X5.3
X5.0
X4.0
X3.3
X4.6
X4.2
X3.6
X3.5
X2.5
X2.4
ƃTrimming : You can extract part of the image that you
want and save it separately.
TRIMMING?
1. Select an image that you want to enlarge and press
TRIM
CANCEL
the enlargement button.
CONFIRM:OK
2. Different parts of the image can be viewed by
pressing the 5 function button.
3. Press the MENU button and a message will be
displayed as shown alongside.
4. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.
[TRIM]
: The trimmed image will save as a new file name, and display on the LCD
monitor.
[CANCEL]: The trimming menu will disappear.
ſ If there is little memory space to save the trimmed image, the image can’t be trimmed.
ſ To delete the enlarged image during the trimming function, press the delete button.
Voice (
) memo / Up button
ƈWhen the menu is displayed on the LCD monitor, pressing the UP button makes the menu
cursor move up.
ƈWhen the menu is not displayed on the LCD monitor, the UP button operates as the voice
memo button. You can add your voice to a stored still image.
ƃAdding a Voice Memo to a Still Image
1. Press the LEFT/ RIGHT button to select an image
that you wish to add sound to.
2. Press the voice memo button (
) and the voice
memo indicator will display. The camera is now
ready to record a voice memo.
ŝ70Ş
START : SHUTTER
Voice (
) memo / Up button
3. Press the shutter button to start recording and voice
will be recorded to the still image for 10 seconds.
While the voice is recording, the recording status
window will be displayed as shown alongside.
STOP : SHUTTER
4. The recording can be stopped by pressing
the shutter button again.
5. The (
) icon will be displayed on the LCD monitor
after voice memo recording has finished.
- Voice memos can’t be recorded onto movie clip and
voice recording files.
- A distance of 40cm between you and the camera
(microphone) is the best distance to record sound.
- The voice memo will be saved in ҭ.wav format, but
has the same file name as the still image to which it
corresponds.
- If you add a new voice memo to the still image that already has a voice memo, the
existing voice memo will be erased.
Play & Pause (
) / Down button
ƈIn Play mode, the play & pause/ down button works as follows:
- If the menu is displayed
Press the DOWN button to move from the main menu to a sub menu, or to move down the
sub menu cursor.
- If a still image with a voice memo, a voice file, or a movie clip is playing
In Stop mode
: Plays a still image with a voice memo, a voice file, or a movie clip.
During playback : Temporarily stops playback.
In Pause mode : Resumes playback
[Voice recording is stopped]
[Voice recording is playing]
[Voice recording is paused]
ŝ71Ş
Delete (
) button
ƈThis deletes images stored on the memory.
ƃDeleting Images in Play Mode
1. Select an image that you want to delete by pressing the
LEFT/ RIGHT button and press the DELETE(
)
button.
2. A message will display as shown alongside on the
LCD monitor.
3. Select the submenu values by pressing the UP/
DOWN button and then press the OK button.
If [DELETE] is selected : deletes the selected images.
If [CANCEL] is selected : cancels "Delete Image".
DELETE ?
DELETE
CANCEL
CONFIRM:OK
ƃDeleting Images in Thumbnail Display Mode
1. Use the UP, DOWN, LEFT, and RIGHT buttons to select the image you want to delete,
and then press the DELETE (
) button.
2. The following message will be displayed on the LCD monitor.
3. Select the submenu values by pressing the UP/DOWN button and then press the OK
button.
If [DELETE] is selected : deletes the selected images.
If [CANCEL] is selected : cancels "Delete Image".
Press the
delete button.
DELETE ?
DELETE
CANCEL
CONFIRM:OK
INFORMATION
ƃBefore deleting images from the camera, you should protect or download images to your
computer that you wish to keep.
ŝ72Ş
Red eye reduction / Printer button (
)
ƈ When a shot with "red eye" is played back, pressing this button can remove the red eye from
the subject.
1. Use the Left / Right button to select the image with red eye.
2. Press the Red eye button (
) and a menu bar for
removing the red-eye effect will display.
SAVE:OK
[Before]
CANCEL:E
[After]
3. Press the OK button and the image should appear with the red eye reduced.
ſ This function can not be used with TIFF files.
ſ Red Eye reduction may not work if the file size is only VGA.
ſ Under some shooting conditions this feature may not activate.
ƈ You camera is generally set to connect to the computer via
the [USB] sub menu. If you have set this then a direct
connection to a Pictbridge printer will not be established. By
pressing the Printer button, at this point, will enable the
camera to establish a connection to the printer. In some
instances the camera may not connect to the printer, this will
depend on the make of the printer.
- After the connection, the Easy printing menu will display
on the LCD monitor. To display the PictBridge menu,
press the Menu button. For more information about the
PictBridge menu, refer to page 91.
IMAGES
ONE PIC
ALL PICS
MOVE:
ŝ73Ş
Left / Right / Menu / OK button
ƈ LEFT / RIGHT/ MENU/ OK buttons activate the following.
- LEFT button
- RIGHT button
- MENU button
- OK button
ŝ74Ş
: While the menu is showing, press the LEFT button to select the menu tab
to the left of the cursor. While the menu is not showing, press the LEFT
button to select the previous image.
: While the menu is showing, press the RIGHT button to select the menu
tab to the right of the cursor, or to move an secondary menu. While the
menu is not showing, press the RIGHT button to select the next image.
: When you press the MENU button, the play mode menu will be displayed
on the LCD monitor. Pressing it again will return the LCD to the initial
display.
: When the menu is displayed on the LCD monitor, the OK button is used
for confirming data that is changed by using the 5 function button.
Album button
ƈYou can organise the captured still images (except for the
TIFF files) into albums by using the Album button.
ƈThis camera has 8 albums and each album can take up to
100 images.
ƈThe album menu loading time depends on the memory
card type.
ƈHow to use the album
ƃSelecting the album
1. In the play mode, press the Album button.
2. Select the ALBUM menu by pressing the Left/ Right
button.
SELECT : OK
3. Select a desired album by pressing the Up/Down
button.
SELECT:OK
ƃInserting still images into the album
1. Select (
) album.
2. Press the OK button and a window for inserting
images will display.
3. Up/ Down button: select an album for inserting
images
Left/ Right button: select images for inserting.
PREV
CONFIRM:OK
EMPTY ALBUM:DEL
ALBUM1
NEXT
E:EXIT
ŝ75Ş
Album button
4. Press the OK button and a confirmation window for
inserting an image will display. Select a desired sub
menu by Pressing the Up/Down button and press
the OK button.
[YES] : inserts an image into the selected album.
[NO] : cancels the inserting image.
ƃRemoving still images from the album
1. Select an album.
2. Press the delete button and a confirmation
window will display.
3. Select a desired sub menu by pressing the Up/ Down
button and press the OK button.
[YES] : Removes all images in the album
[NO] : Cancels the removing images
ƃRemoving selected image
1. Select an album.
2. Press the OK button and a window for removing
images will display.
Left/ Right button: select images
Delete button
: A confirmation window will display.
Select a desired sub menu by
pressing the Up/Down button and
press the OK button.
[YES] : the selected image will be removed
[NO] : Cancels the removing image
RELOCATE
PREV
YES
NO
CONFIRM:OK
ALBUM1
CONFIRM:OK
NEXT
E:EXIT
EMPTY ALBUM?
YES
NO
CONFIRM:OK
SELECT:OK
PREV
EMPTY ALBUM:DEL
ALBUM1
CONFIRM:OK
NEXT
E:EXIT
REMOVE
YES
NO
CONFIRM:OK
CONFIRM:OK
INFORMATION
ƃIf an image is deleted from the memory, the image doesn’t display on an album.
ƃAn image can be added into the different albums.
ŝ76Ş
E:EXIT
Album button
ƃPlaying back the albums
Ƅ Playing back all of the albums
1. Select (
) album.
2. Select SHOW menu by pressing the Left/ Right button.
3. Select a desired sub menu by pressing the Up/ Down
button. Press the OK button and the slide show will start.
(
) : The slide show is closed after one cycle.
(
) : The slide show is repeated until the OK button is
PLAY:OK
pressed.
Ƅ Playing a desired album
1. Select a desired album.
2. Select SHOW menu by pressing the Left/ Right button.
3. Select a desired sub menu by pressing the Up/ Down button.
Press the OK button and the slide show will start.
(
) : The slide show is closed after one cycle.
(
) : The slide show is repeated until the OK button is pressed.
ƃSetting play interval: Set the slide show play interval.
1. Select a desired album.
2. Select INTER. menu by pressing the Left/ Right
button.
3. Select a desired sub menu by pressing the
Up/ Down button.
ƃConfigure slide show effects
: Unique screen effects can be used for the slide show.
1. Select a desired album.
2. Select EFFECT menu by pressing the Left/ Right
button.
3. Select a desired sub menu by pressing the
Up/ Down button.
(
) : Normal display.
(
) : Image appears slowly
(
) : Image is displayed slowly from the centre outwards.
(
) : Image moves from the top left.
(
) : The image slides diagonally from top left to bottom right.
(
):
and
effects are applied in order.
ŝ77Ş
Remote control
ƈ After connecting the camera with an external monitor, you can see the captured image by
using the remote control.
ƈ Remote control is optional in some countries.
ƈ In play mode, you can use the remote control to set up the play mode functions.
Enlargement button
Thumbnail button
Display / Information button
Up / Down / Left / Right button
Play & Pause button
ƈ See below for operation of buttons
- Enlargement button : In play mode, this button enlarges the selected image.
- Thumbnail button : If an image is enlarged, pressing this button will reduce the enlargement
rate. In play mode, you can view multiple pictures by pressing this button.
ŝ78Ş
Remote control
- Display / Information button
: In play mode, you can view the information of the selected
image by pressing this button.
- Up / Down/ Left / Right button : In play mode, you can select a still image or movie clip by
pressing the Left/ Right button.
In play mode, different parts of the enlarged image can be
viewed by pressing these buttons.
In the thumbnail mode, you can move to a desired image
by pressing these buttons.
- Play & Pause button : If a still image with a voice memo or a movie clip is playing, pressing
this button make the files play back or pause.
ŝ79Ş
Setting up the play back function using the LCD monitor
ƈPLAY mode functions can be changed by using the LCD monitor. In the PLAY mode,
pressing the MENU button displays the menu on the LCD monitor. The menus you can set up
in Play mode are as follows. To capture an image after setting up the play menu, press the
PLAY button.
Menu tab
Main menu
ROTATE
RESIZE
PROTECT
DELETE ALL
DPOF
Sub menu
Secondary menu
RIGHT90Ŋ
-
LEFT90Ŋ
-
180Ŋ
-
HORIZONTAL
-
VERTICAL
-
Normal angle mode
Wide angle mode
2272X1704
2688X1512
2048X1536
2304X1296
1600X1200
1792X1008
1024X768
1280X720
640X480
768X432
USER IMAGE1,2
USER IMAGE1,2
SELECT
UNLOCK/LOCK
ALL
UNLOCK/LOCK
NO
-
YES
-
STANDARD
ONE PIC/ALL PICS
INDEX
NO/ YES
PRINT SIZE
DEFAULT/3X5/4X6/5X7/8X10
CANCEL
STANDARD/INDEX/PRINT SIZE
Page
p. 83
p. 84
p. 85
p. 86
p. 86
FULL OSD
OSD INFORMATION
COPY TO CARD
ŝ80Ş
BASIC OSD
-
IMAGE INFORMATION
-
NO
-
YES
-
p. 89
p. 90
Setting up the play back function using the LCD monitor
ƈThis menu is available while the camera is connected to a PictBridge supporting printer (direct
connection to the camera, sold separately) with a USB cable.
Menu tab
Main menu
IMAGES
AUTO SET
Sub menu
Secondary menu
ONE PIC
-
ALL PICS
-
NO
-
YES
-
Page
p. 92
p. 93
AUTO
POSTCARD
CARD
LETTER
SIZE
4X6
L
2L
A4
A3
AUTO
CUSTOM SET
FULL
p. 93
1
2
LAYOUT
4
8
9
16
AUTO
TYPE
PLAIN
PHOTO
FAST PHO.
ŝ81Ş
Setting up the play back function using the LCD monitor
Menu tab
Main menu
Sub menu
Secondary menu
Page
AUTO
DRAFT
QUALITY
NORMAL
FINE
AUTO
p. 93
CUSTOM SET
DATE
OFF
ON
AUTO
FILE NAME
OFF
ON
STANDARD
-
INDEX
-
NO
-
YES
-
NO
-
YES
-
PRINT
DPOF PRINT
p. 94
p. 94
RESET
ſ Menus are subject to change without prior notice.
ŝ82Ş
p. 95
Rotating an image
ƈ You can rotate the stored images by various degrees. Once the playback of the rotated
picture is finished, it will switch back to the original state.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [ROTATE]
menu tab.
3. Select a desired sub menu by pressing the UP/ DOWN
button.
[RIGHT 90˚] :
Rotate picture in a
clock-wise direction
[LEFT 90˚] :
Rotate picture in a counterclock-wise direction
[HORIZONTAL] :
Rotate picture horizontally
ROTATE
RIGHT 90ŭ
LEFT 90ŭ
180ŭ
HORIZONTAL
VERTICAL
EXIT:MENU
MOVE:
[180˚] :
Rotate picture 180 degrees
[VERTICAL] :
Rotate picture vertically
4. Press the OK button and the rotated image will be displayed.
If you display the rotated image on the LCD monitor, empty spaces may appear to the left
and right of the image.
ŝ83Ş
Resize
ƈChange the resolution (size) of pictures taken. Select [USER IMAGE] to save an image to be
the start-up image. The resized image will have a new file name.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [RESIZE]
menu tab.
3. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
RESIZE
2272 X 1704
2048 X 1538
1600 X 1200
1024 X 768
640 X 480
EXIT:MENU
MOVE:
ƃImage Resize Types
Resize
4M
3M
2M
1M
VGA
USER
IMAGE
5M
O
O
O
O
O
O
4M
X
O
O
O
O
O
3M
X
X
O
O
O
O
2M
X
X
X
O
O
O
1M
X
X
X
X
O
O
VGA
X
X
X
X
X
O
INFORMATION
ƃA large sized image can be resized to a smaller sized image, but not vice versa.
ƃOnly JPEG images can be resized. Movie, voice and TIFF files can not be resized.
ƃYou can change the resolution of only those files compressed in the JPEG 4:2:2 format.
ƃThe resized image will have a new file name. The [USER IMAGE] image is stored not on
the memory card but on the internal memory.
ƃOnly two [USER IMAGE] images can be saved. If you save a new [USER IMAGE] image,
the existing startup image will be deleted in order.
ƃIf the memory capacity is insufficient to store the resized image, a [CARD FULL!]
message will display on the LCD monitor and the resized image will not be stored.
ŝ84Ş
Protecting images
ƈThis is used to protect specific shots from being accidentally erased (LOCK).
It also unprotects images that have been previously protected
(UNLOCK).
ƃProtecting Images
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [PROTECT]
PROTECT
menu tab.
SELECT
ALL
3. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[SELECT] : Only an image that is displayed on the LCD
EXIT:MENU
MOVE:
monitor is protected or unprotected.
[ALL]
: All of the stored images are protected or unprotected.
4. Select the desired secondary menu by pressing the
UP/ DOWN button and press the OK button.
[UNLOCK] : Cancels the protect function.
[LOCK]
: Sets up the protect function.
- If you select the [SELECT] sub menu at step 3, you
can protect or unprotect another image by pressing
the LEFT/ RIGHT button. If you press the
SHUTTER button, the Image Protection menu will
disappear.
- If you protect an image, the protect icon(
) will
be displayed on the LCD monitor.
(An unprotected image has no indicator)
- An image in LOCK mode will be protected from
delete or [DELETE ALL] functions, but will NOT be
protected from the [FORMAT] function.
PREVȜ
SET:OK
UNLOCK
ȞNEXT
EXIT:SH1
ŝ85Ş
Deleting all images
ƈOf all the files stored in the memory card, the unprotected files in the DCIM subfolder will be
deleted. Remember that this will permanently delete unprotected images. Important shots
should be stored on a computer before deletion takes place. The startup image is stored in
the camera's internal memory (i.e., not on the memory card) and it will not be deleted even if
you delete all files on the memory card.
ƃDeleting all images
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the
DELETE ALL
[DELETE ALL] menu tab.
NO
YES
3. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
Selecting [NO] : cancels “Delete All”
EXIT:MENU
MOVE:
Selecting [YES] : Displays the dialogue box to confirm the
delete.
- If [DELETE] is selected : press the OK button and all unprotected pictures are deleted.
- If [CANCEL] is selected : press the OK button and images are not deleted.
DPOF
ƈDPOF(Digital Print Order Format) allows you to embed printing information on your memory
card’s MISC folder. Select the pictures to be printed and how many prints to make.
ƈThe DPOF indicator will display on the LCD monitor when an image that has DPOF
information plays back. Images can then be printed on DPOF printers, or at an increasing
number of photo labs.
ƈThis function is not available for Movie clips and Voice recording files.
ƈWhen the wide angle image is printed as a wide angle print, 8% of the left and right side of the
image may not be printed. Check that your printer can support the wide angle image when
you print the image. When you print the image at a photo lab, request that the image is
printed as a wide angle image. (Some photo labs may not support the wide angle size print.)
ŝ86Ş
DPOF : STANDARD
ƈThis function allows you to embed print quantity information on a stored image.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [DPOF]
DPOF
menu tab.
STANDARD ONE PIC
INDEX
ALL PICS
3. Select the [STANDARD] menu by pressing the
PRINT SIZE
UP/ DOWN button and press the RIGHT button.
CANCEL
4. Use the UP and DOWN buttons to select [ONE PIC] or
BACK:
SET:OK
[ALL PICS], and then press the OK button. A window
for selecting number of copies will display.
[ONE PIC] : Set the number of copies to print for the
current picture only.
[ALL PICS] : Set the number of copies to print for each
picture, excluding movie clips and voice
PREVȜ 0 PRINTS ȞNEXT
recordings.
SET:OK
EXIT:SH1
5. Use the UP and DOWN buttons to select the number
of copies and then press the OK button.
- The DPOF icon (
) will appear by the pictures for
which the number of copies to print is set.
DPOF : INDEX
ƈImages (except for movie clips and voice file) are printed as index type.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [DPOF]
DPOF
menu tab.
STANDARD
NO
INDEX
YES
3. Select the [INDEX] menu by pressing the UP/ DOWN
PRINT SIZE
button and press the RIGHT button.
CANCEL
4. Select a desired sub menu by pressing the UP/ DOWN
BACK:
button.
If [NO] is selected : The image will not be printed in
index format.
If [YES] is selected : The image will be printed in index format.
5. Press the OK button to confirm the setting.
6. Press the menu button twice and the menu will disappear.
SET:OK
ŝ87Ş
DPOF : PRINT SIZE
ƈYou can specify the print size when printing images stored on the memory card.
The [PRINT SIZE] menu is available only for DPOF 1.1 compatible printers.
ƃSetting the Print Size
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [DPOF]
menu tab.
3. Select the [PRINT SIZE] menu by pressing the
UP/ DOWN button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
DPOF
STANDARD
DEFAULT
INDEX
3X5
PRINT SIZE 4X6
CANCEL
BACK:
5X7
8X10
SET:OK
* PRINT SIZE : DEFAULT, 3X5, 4X6, 5X7, 8X10
* The [DEFAULT] print size varies depending on the printer manufacturer.
For your printer's default value, please refer to the user's guide that came with your printer.
DPOF : CANCEL
ƈYou can cancel the [STANDARD], [INDEX], or [PRINT SIZE] settings. Cancel the setting to
reset the value to its default.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [DPOF]
DPOF
menu tab.
STANDARD
STANDARD
INDEX
INDEX
3. Select the [CANCEL] menu by pressing the UP/ DOWN
PRINT SIZE
PRINT SIZE
button and press the RIGHT button.
CANCEL
4. Select a desired sub menu by pressing the UP/ DOWN
BACK:
SET:OK
button.
If [STANDARD] is selected : Cancels the standard print setting.
If [INDEX] is selected
: Cancels the index print setting.
If [PRINT SIZE] is selected : Cancels the print size setting.
5. Press the OK button to confirm the setting.
ŝ88Ş
On Screen Display information
ƈ You can check shooting information about the displayed image.
1. Press the play mode button and press the menu button.
2. Select the [OSD INFORMATION] menu tab by pressing
the LEFT/ RIGHT button.
3. Select a desired sub menu by pressing the UP/ DOWN
button.
- [FULL OSD] : All information shown as below is displayed.
- [BASIC OSD] : Some information shown as below is
displayed.
- [IMAGE INFORMATION] : Shooting information about the
displayed image image is shown.
OSD INFORMATION
FULL OSD
BASIC OSD
IMAGE INFORMATION
SIZE
AV
TV
ISO
FLASH
DATE
[FULL OSD]
[BASIC OSD]
: 2592X1944
: F3.3
: 10/60
: 100
: OFF
: 2005/08/01
[IMAGE INFORMATION]
4. Press the OK button to confirm the setting.
ŝ89Ş
Copy To Card
ƈ This enables you to copy image files, movie clips and voice recording files to the memory card.
ƃ Copying to the Memory Card
1. Press the play mode button and press the menu button.
2. Select the [COPY TO CARD] menu tab by pressing the
COPY TO CARD
LEFT/ RIGHT button.
NO
YES
3. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
- [NO] : Cancels "Copy to Card".
EXIT:MENU
MOVE:
- [YES]: All images, movie clips and voice recording files
saved in the internal memory are copied to the memory card after the
[PROCESSING!] message is displayed. After copying has been completed, the
screen will return to play mode.
INFORMATION
ƃ When this menu is selected without inserting a memory card, you can select the
[COPY TO CARD] menu but the menu can’t be run.
ƃ If there is not enough space available in the memory card to copy saved images in the
internal memory (24MB), the [COPY TO CARD] command will copy only some of the
images and display [CARD FULL!] message. Then the system will return to the playback
mode. Please be sure to delete any unnecessary files to free up space before inserting
the memory card into the camera.
ƃ When you move the images that are stored in the internal memory to a memory card via
the [COPY TO CARD] function, the next file names will be created in the card to avoid
duplication of the file names moved from the internal memory.
- When the [RESET] of the [FILE] setup menu is selected :The copied file names start
from after the last stored file name.
- When the [SERIES] of the [FILE] setup menu is selected : The copied file names start
from after the last captured file name.
After completing [COPY TO CARD], the last stored image of the last copied folder is
displayed on the LCD monitor.
ŝ90Ş
PictBridge
ƈ You can use the USB cable to connect this camera to a printer that supports PictBridge (sold
separately) and print the stored images directly. Movie clips and voice files cannot be printed.
ƃ Setting up the camera for connection with the printer
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select [SETUP] menu
tab.
3. Select [USB] menu by pressing the UP/ DOWN button and
press the RIGHT button.
4. Select [PRINTER] menu by pressing the UP/ DOWN button
and press the OK button.
SETUP
DATE&TIME
IMPRINT
AF LAMP
SOUND
COMPUTER
PRINTER
USB
BACK:
SET:OK
ƈ Connecting the Camera to a Printer
ƃ Using the USB cable with Cradle :
Connect the camera and the cradle. Connect the cradle to a printer’s USB port with the
supplied USB cable.
ƃ Using the USB cable with Camera :
Connect the camera to a printer’s USB port with the supplied USB cable.
[Using the USB cable with Cradle]
[Using the USB cable with Camera]
ſ If you selected [COMPUTER] in Step 4, when you connect the camera to your printer, the
[CONNECTING COMPUTER] message will display and the connection will not be
established. In this case, disconnect the USB cable, and then follow the procedure from Step
2 and onward. Or, press the Printer button and the camera is connected to the printer
displaying the [CONNECTING PRINTER] message. But, the camera may not connect to the
printer and turn off according to the printer manufacturer.
ŝ91Ş
PictBridge : Picture Selection
ƈ Easy printing
When you connect the camera to printer in the Play back
mode, you can print a picture easily.
- Pressing the shutter button : Currently displayed image will
be printed with the printer’s
default setting.
- Pressing the Left/ Right button : Selects a previous/ next
image.
ƈ Select pictures to print
1. Press the Menu button.
2. The [IMAGES] menu will appear.
3. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
When [ONE PIC] is selected : The PictBridge function will
be applied only to the
picture currently displayed.
When [All PICS] is selected : The PictBridge function will
be applied to all pictures,
excluding movie clips and
voice files.
PRINT:SHUTTER
MENU:OK
IMAGES
ONE PIC
ALL PICS
MOVE:
ƃ Setting the Number of Copies to Print
- Select [ONE PIC] or [All PICS]. A screen where you can set the number of copies to print
will appear as shown below.
Ɗ
0 PRINTS
ƌ
Ɗ
PREV Ȝ 0 PRINTS Ȟ NEXT
ƌ
SET:OK
EXIT:SH1
[When [ONE PIC] is selected]
SET:OK
EXIT:SH1
[When [All PICS] is selected]
- Press the Up/ Down button to select the number of prints.
- When [ONE PIC] is selected : Use the Left/ Right button to select another picture. After
selecting another picture, select select the number of prints for another picture.
- After setting the number of prints, press the OK button to save.
- Press the Shutter button to return to the menu without setting the number of prints.
ŝ92Ş
PictBridge : Print Setting
ƈ AUTO SET
1. Use the LEFT and RIGHT buttons to select the
[AUTO SET] menu tab.
2. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
[NO] : [CUSTOM SET] values are kept.
[YES] : All values in the [CUSTOM SET] are
automatically changed.
AUTO SET
NO
YES
MOVE:
ƈ Custom Set : You can select the Paper Size, Print Format, Paper Type, Print Quality, Date
Print, and File Name Print menus for printed pictures.
1. Use the LEFT and RIGHT buttons to select the
[CUSTOM SET] menu tab.
2. Use the UP and DOWN buttons to select the desired
submenu value, and then press the RIGHT button.
3. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
CUSTOM SET
SIZE
LAYOUT
TYPE
QUALITY
DATE
AUTO
AUTO
AUTO
AUTO
AUTO
MOVE:
ƃ The menus you can set up are as follows:
Function
Menu
SIZE
LAYOUT
TYPE
QUALITY
DATE
FILE NAME
Setting the size of the printing paper
Setting the number of pictures to be
printed on a sheet of paper
Setting the quality of the printing paper
Setting the quality of the picture to be
printed
Sub menu
AUTO, POSTCARD, CARD, 4 X 6, L, 2L, LETTER, A4, A3
AUTO, FULL, 1, 2, 4, 8, 9, 16
AUTO, PLAIN, PHOTO, FASTPHO.
AUTO, DRAFT, NORMAL, FINE
Setting whether to print the date
AUTO, OFF, ON
Setting whether to print the file name
AUTO, OFF, ON
ſ Some menu options are not supported in all manufacturer and printer models.
If not supported, the menus are still displayed in the LCD, but are not selectable.
ſ If the setting values are not changed in the automatic/ manual setting, the setting values are
automatically kept.
ŝ93Ş
PictBridge : Printing
ƈ When the wide angle image is printed as a wide angle print, 8% of the left and right side of
the image may not be printed. Check that your printer can support the wide angle image
when you print. When you print the image in a photo lab, please ask that the image is printed
as a wide angle image. (Some photo labs may not support the wide angle size print.)
ƈ Printing Pictures
1. Use the LEFT and RIGHT buttons to select the [PRINT]
menu tab.
2. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
[STANDARD] : Print the pictures stored in the memory card
in set numbers. One picture is printed on
one piece of paper.
[INDEX]
: Print multiple images on one sheet of paper.
3. The screen shown on the right will appear and the picture
will be printed. If no picture is selected, the [NO IMAGE!]
message will be displayed. Press the shutter button while
printing to cancel the printing and the [IMAGES] menu is
displayed.
ſ Number of pictures in an index print varies depends on the
printer used.
PRINT
STANDARD
INDEX
MOVE:
NOW PRINTING
001/026
EXIT:SH1
ƈ DPOF Print : This allows you to directly print the files with DPOF information.
1. Use the LEFT and RIGHT buttons to select the
[DPOF PRINT] menu tab.
2. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
[NO] : Cancel the printing
[YES] : Directly print the file with the DPOF information
DPOF PRINT
NO
YES
MOVE:
ſ Depending on the manufacturer and printer model, some
menus may not be available.
With a printer without supporting the DPOF, the menu is still displayed but not available.
ŝ94Ş
PictBridge : RESET
ƈ Initialises user-changed configurations.
1. Use the LEFT and RIGHT buttons to select the [RESET]
menu tab.
2. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
If [NO] is selected : Settings will not be reset.
If [YES] is selected : All print and image settings will be
reset.
RESET
NO
YES
MOVE:
ſ Default print setting varies depending on the printer manufacturer.
For your printer’s default setting, refer to the user’s guide that came with your printer.
ŝ95Ş
Setup menu
ƈIn this mode, you can set up basic settings. You can use the setup menu in all camera
modes, except Voice Recording mode.
The items indicated by
are default settings.
Menu tab
Main menu
FILE
PWR SAVE
Sub menu
Secondary menu
SERIES
-
RESET
-
OFF, 1, 3, 5MIN
-
Page
p.97
p.98
ENGLISH
ጥૹ࿴
FRANÇAIS
DEUTSCH
ESPAÑOL
ITALIANO
P”CCK»…
PORTUGUÊS
DUTCH
DANSK
SVENSKA
SUOMI
⁹᪎ᷘ
LANGUAGE
p.99
BAHASA
POLSKI
FORMAT
DATE&TIME
IMPRINT
AF LAMP
SOUND
USB
ŝ96Ş
MAGYAR
NO
-
YES
-
05/01/01 13:00
OFF
YYYY/MM/DD
-
DD/MM/YYYY
-
MM/DD/YYYY
-
OFF
-
DATE
-
DATE&TIME
-
OFF
-
ON
-
OFF
-
LOW
-
MEDIUM
-
HIGH
-
COMPUTER
PRINTER
p.99
p.100
p.100
p.101
p.101
p.102
Setup menu
Menu tab
Main menu
Sub menu
DARK
-
LCD
NORMAL
-
VIDEO
Q.VIEW
RESET
Secondary menu
BRIGHT
-
NTSC
-
PAL
-
OFF, 0.5, 1, 3SEC
-
NO
-
YES
-
Page
p.102
p.103
p.105
p.105
ſ Menus are subject to change without prior notice.
File name
ƈ This function allows the user to select the file naming format.
ƃ Assigning File Names
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
SETUP
2. Press the LEFT/ RIGHT button and select the [SETUP]
SERIES
FILE
PWR SAVE
RESET
menu tab.
LANGUAGE
FORMAT
3. Select the [FILE] menu by pressing the UP/ DOWN button
DATE&TIME
and press the RIGHT button.
BACK :
SET:OK
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[SERIES] : New files are named using numbers that follow the previous sequence, even
when a new memory card is used, or after formatting, or after deleting all
pictures.
[RESET] : After using the reset function, the next file name will be set from 0001 even
after formatting, deleting all or inserting a new memory card.
5. Press the menu button twice and the menu will disappear.
ŝ97Ş
File name
INFORMATION
ƃThe first stored folder name is 100SSCAM, and the first file name is SL550001.
ƃ File names are assigned sequentially from SL550001 ƍ SL550002 ƍ ~ ƍ SL559999.
ƃThe folder number is assigned sequentially from 100 to 999 as follows:
100SSCAM ƍ 101SSCAM ƍ ~ ƍ 999SSCAM.
ƃThe files used with the memory card conform to the DCF(Design rule for Camera File
systems) format.
Auto power off
ƈ This function switches the camera off after a set amount of time in order to prevent
unnecessary battery drainage.
ƃSetting Power Off
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
SETUP
2. Press the LEFT/ RIGHT button and select the [SETUP]
OFF
FILE
PWR SAVE 1MIN
menu tab.
3MIN
LANGUAGE
FORMAT
3. Select the [PWR SAVE] menu by pressing the
5MIN
DATE&TIME
UP/ DOWN button and press the RIGHT button.
ಒൂ:Ȝ
໽Ⴤ:OK
BACK:
SET:OK
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[OFF]: The power off function will not operate.
[1, 3, 5 MIN]
: The power will turn off automatically if not used for the period of time
specified.
5. Press the menu button twice and the menu will disappear.
INFORMATION
ƃEven if the battery is removed and inserted again, the power off setting will be preserved.
ƃNote that the automatic power off function will not operate if the camera is in PC mode,
slide show, playing back a voice recording and playing back a movie clip.
ŝ98Ş
Language
ƈThere is a choice of languages that can be displayed on the LCD monitor. Even if the battery
is removed and inserted again, the language setting will be preserved.
ƃSetting Language
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
SETUP
2. Press the LEFT/ RIGHT button and select the [SETUP] menu tab.
FILE
ENGLISH
PWR
SAVE
3. Select the [LANGUAGE] menu by pressing the
ጥૹ࿴
LANGUAGE FRANÇAIS
UP/ DOWN button and press the RIGHT button.
FORMAT
DEUTSCH
ESPAÑOL
DATE&TIME
4. Select a desired sub menu by pressing the UP/ DOWN
BACK:
SET:OK
button and press the OK button.
LANGUAGE sub menu : English, Korean, French, German,
Spanish, Italian, S.Chinese, T.Chinese, Japanese, Russian, Portuguese, Dutch, Danish, Swedish,
Finnish, Thai, BAHASA(MALAY/ INDONESIAN), Arabic, Hungarian, Czech and Polish.
5. Press the menu button twice and the menu will disappear.
Formatting a memory
ƈThis is used for formatting the memory. If you run [FORMAT] on the memory, all images,
including the protected images, will be deleted. Be sure to download important images to your
PC before formatting the memory.
ƃFormatting a memory
1. In any mode other than Voice Recording mode, press the
MENU button.
SETUP
2. Press the LEFT/ RIGHT button and select the [SETUP] menu tab.
FILE
NO
PWR
SAVE
YES
3. Select the [FORMAT] menu by pressing the UP/ DOWN
LANGUAGE
button and press the RIGHT button.
FORMAT
DATE&TIME
4. Select a desired sub menu by pressing the UP/ DOWN
BACK:
SET:OK
button and press the OK button.
If [NO] is selected
: The memory will not be formatted.
Press the menu button twice and the menu display will disappear.
If [YES] is selected : A confirmation window will display. Select the [FORMAT]
message. A [PROCESSING!] message appears and the memory
will be formatted. If you ran FORMAT in Play mode, a [NO
IMAGE!] message will appear.
INFORMATION
ƃBe sure to run [FORMAT] on the following types of memory card.
- A new memory card, or an unformatted memory card.
- A memory card that has a file this camera can't recognise or one that has been taken
from another camera.
ƃAlways format the memory card using this camera. If you insert a memory card that has
been formatted using other cameras, memory card readers, or PCs, you will get a [CARD
ERROR!] message.
ŝ99Ş
Setting up the Date / Time / Date type
ƈYou can change the date and time that will be displayed on the captured images and set up the
date type.
ƃSetting Date / Time & Selecting Date Format
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
SETUP
2. Press the LEFT/ RIGHT button and select the [SETUP]
FILE
05/08/01 13:00
PWR SAVE
menu tab.
LANGUAGE
YYYY/MM/DD
FORMAT
3. Select the [DATE&TIME] menu by pressing the
DATE&TIME
UP/ DOWN button and press the RIGHT button.
BACK:
SET:OK
4. Use the UP, DOWN, LEFT, and RIGHT buttons to select
the desired submenu value, and then press the OK button.
RIGHT button : Selects the year/ month/ day/ hour/ minute date type.
LEFT button : Moves the cursor to the [DATE&TIME] main menu if the cursor is at the
first item of the date and time setup. In all other cases, the cursor will be
shifted to the left of its current position.
UP and DOWN buttons : Changes the setting value.
5. Press the menu button twice and the menu will disappear.
Ɗ
ƌ
Imprinting the recording date
ƈThere is an option to include DATE/ TIME on still images.
ƃDate Imprinting
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
SETUP
2. Press the LEFT/ RIGHT button and select the [SETUP]
PWR SAVE
OFF
LANGUAGE
DATE
menu tab.
FORMAT
DATE&TIME
DATE&TIME
3. Select the [IMPRINT] menu by pressing the UP/ DOWN
IMPRINT
button and press the RIGHT button.
ಒൂ:Ȝ
໽Ⴤ:OK
BACK:
SET:OK
4. Use the UP and DOWN buttons to select the desired date
imprint type, and then press the OK button.
[OFF]
: The DATE & TIME will not be imprinted on the image file.
[DATE] : Only the DATE will be imprinted on the image file.
[DATE&TIME] : The DATE & TIME will be imprinted on the image file.
5. Press the menu button twice and the menu will disappear.
ſ The Date & Time are imprinted at the bottom right side of the still image.
ſ The date will be imprinted as a [DATE&TIME] setting.
ſ TIME is imprinted in the following way : [Hour : Minute] and hours are shown using the
24 hour clock.
ſ If you select the continuous shooting, the date doesn’t be imprinted.
ŝ100Ş
Auto Focus lamp
ƈYou can turn on and off the Auto Focus lamp
ƃHow to set up the lamp
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [AF LAMP] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
If [OFF] is selected : The AF lamp will not light up.
If [ON] is selected : The AF lamp will light up.
SETUP
LANGUAGE
OFF
FORMAT
ON
DATE&TIME
IMPRINT
AF LAMP
BACK:
SET:OK
ſ If you select [OFF] menu and take an image in poorly lit conditions or select the [NIGHT]
scene mode, the camera may not take exact focus.
Sound
ƈIf you set the operation sound to ON, various sounds will be activated for camera startup,
when button are pressed, and if there is a card error, so that you can be aware of the camera
operation status.
ƃSetting Operation Sounds
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [SOUND] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[SOUND] sub menu : OFF/ LOW/ MEDIUM/ HIGH
5. Press the menu button twice and the menu will disappear.
SETUP
FORMAT
OFF
DATE&TIME
LOW
IMPRINT
MEDIUM
AF LAMP
HIGH
SOUND
BACK:
SET:OK
ŝ101Ş
Connecting an External Device (USB)
ƈ You can select an external device to which you want to connect the camera using the USB
cable.
ƃ Selecting an External Device
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
SETUP
2. Press the LEFT/ RIGHT button and select the [SETUP]
DATE&TIME
COMPUTER
IMPRINT
PRINTER
menu tab.
AF LAMP
SOUND
3. Select the [USB] menu by pressing the UP/ DOWN button
USB
and press the RIGHT button.
BACK:
SET:OK
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[COMPUTER] : Select this if you want to connect the camera to your PC.
Refer to page 127 for instructions on how to connect the camera to your
PC.
[PRINTER]
: Select this if you want to connect the camera to your printer.
Refer to page 91 for instructions on how to connect the camera to your
printer.
5. Press the menu button twice and the menu will disappear.
LCD brightness
ƈ You can adjust the LCD brightness.
ƃ Adjusting LCD Brightness
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [LCD] menu by pressing the UP/ DOWN button
and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[LCD] sub menu : DARK, NORMAL, BRIGHT
5. Press the menu button twice and the menu will disappear.
ŝ102Ş
IMPRINT
AF LAMP
SOUND
USB
SETUP
DARK
NORMAL
BRIGHT
LCD
BACK:
SET:OK
Selecting Video out type
ƈ The Movie output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the
camera is connected. PAL mode can support only BDGHI.
ƃ Setting the Video Out Type
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [VIDEO] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
- [VIDEO] sub menu : NTSC, PAL
5. Press the menu button twice and the menu will disappear.
SETUP
AF LAMP
SOUND
USB
LCD
NTSC
PAL
VIDEO
BACK:
SET:OK
ƈ Connecting to an external monitor
ƃ Using the AV cable with Cradle
: Connect the camera and the cradle.
Connect the cradle to an external monitor with the
supplied AV cable.
ƃ Using the AV cable with Camera : Connect the camera to an external monitor with the
supplied AV cable.
[Using the AV cable with Cradle]
Yellow - Video
White - sound
[Using the AV cable with Camera]
ŝ103Ş
Selecting Video out type
INFORMATION
ƃ NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.
ƃ PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland,
Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland,
Thailand, Norway.
ƃ When using a TV as an external monitor, you will need to select the external or AV
channel of the TV.
ƃ There will be a digital noise on the external monitor, but it is not a malfunction.
ƃ If the image is not in the centre of the screen, use the TV controls to centre it.
ƃ When the camera is connected to an external monitor, the menu will be visible on the
external monitor and the menu functions are the same as those indicated on the LCD
monitor.
ƃ When selecting the PAL video out type, the TV monitor turns off and the LCD monitor of
the camera turns on when you record a movie. After completing the recording, the TV
monitor turns on and the LCD monitor of the camera turns off.
ŝ104Ş
Quick view
ƈ If you enable Quick View before capturing an image, you can view the image you just
captured on the LCD monitor for the duration set in the [Q.VIEW] setup. Quick view is
possible only with still images.
ƃ Setting Quick View
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
SETUP
2. Press the LEFT/ RIGHT button and select the [SETUP]
SOUND
OFF
USB
0.5 SEC
menu tab.
LCD
1 SEC
VIDEO
3. Select the [Q.VIEW] menu by pressing the UP/ DOWN
3 SEC
Q.VIEW
button and press the RIGHT button.
BACK:
SET:OK
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[OFF]
: The quick view function can’t be activated.
[0.5, 1, 3SEC] : The captured image is briefly displayed during the selected time.
5. Press the menu button twice and the menu will disappear.
Initialisation
ƈ All camera menu and function settings will be restored to their default values.
However, values for DATE/TIME, LANGUAGE, and VIDEO OUT will not be changed.
ƃ Initialising the Camera
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
SETUP
USB
2. Press the LEFT/ RIGHT button and select the [SETUP]
NO
LCD
YES
menu tab.
VIDEO
Q.VIEW
3. Select the [RESET] menu by pressing the UP/ DOWN
RESET
button and press the RIGHT button.
BACK:
SET:OK
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
If [NO] is selected : Settings will not be restored to their defaults.
If [YES] is selected : A confirmation window will display. Select the [YES] menu and press
the OK button. All settings will be restored to their defaults.
ŝ105Ş
Setting up the Mycam menu
ƈ You can set up a start up image, start up sound and shutter sound. Every camera working
mode (with the exception of Voice recording mode) has the MyCAM menu. The items
indicated by
are default settings.
Menu tab
Main menu
S.IMAGE
S.SOUND
SH.SOUND
Sub menu
Page
OFF
LOGO
USER IMAGE 1
USER IMAGE 2
OFF
SOUND 1
SOUND 2
SOUND 3
OFF
SH.SOUND 1
SH.SOUND 2
SH.SOUND 3
p.106
p.107
p.107
ſ Menus are subject to change without prior notice.
Start up image
ƈ You can select the image that is first displayed on the LCD monitor whenever the camera is
turned on.
ƃ Setting a Startup Image
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [MYCAM]
menu tab.
3. Select the [S.IMAGE] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
5. Press the menu button twice and the menu will disappear.
MYCAM
S.IMAGE
Ɗ
S.SOUND
SH.SOUND
ƌ
BACK:
SET:OK
INFORMATION
ƃ Use a saved image for the start-up image with the [USER IMAGE] in the [RESIZE] menu
in the play mode.
ƃ The start-up image will not be deleted by [DELETE ALL] or [FORMAT] menu.
ƃ The User images will be deleted by [RESET] menu.
ŝ106Ş
Start up sound
ƈ You can select the sound that is activated whenever the camera is turned on.
ƃ Setting the Startup Sound
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [MYCAM]
menu tab.
3. Select the [S.SOUND] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
5. Press the menu button twice and the menu will disappear.
MYCAM
S.IMAGE
OFF
S.SOUND
SOUND1
SOUND2
SOUND3
SH.SOUND
BACK:
SET:OK
Shutter sound
ƈ You can select the shutter sound.
ƃ Selecting the Shutter Sound
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [MYCAM]
menu tab.
3. Select the [SH.SOUND] menu by pressing the UP/
DOWN button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
5. Press the menu button twice and the menu will disappear.
S.IMAGE
S.SOUND
MYCAM
OFF
SH.SOUND
BACK:
SH.SOUND1
SH.SOUND2
SH.SOUND3
SET:OK
ŝ107Ş
Important notes
Be sure to observe the following precautions!
ƈThis unit contains precision electronic components. Do not use or store this unit in the
following locations.
- Areas exposed to severe changes in temperature and humidity.
- Areas exposed to dust and dirt.
- Areas exposed to direct sunlight or the inside of a vehicle in hot weather.
- Environments where there is high magnetism or excessive vibration.
- Areas with high explosives or highly flammable materials.
ƈDo not leave this camera in places subject to dust, chemicals (like naphthalene and mothball),
high temperature and high humidity.
Keep this camera with silica gel in a hermetically sealed box when not planning to use the
camera for a long period of time
ƈSand can be particularly troublesome to cameras.
- Do not let sand get inside the unit when using it on beaches, coastal dunes, or other areas
where there is lots of sand.
- Doing so may result in failure or may permanently render the unit unusable.
ƈHandling the camera
- Never drop the camera or subject it to severe shocks or vibrations.
- Prevent the large size LCD monitor from an impact. When this camera is not used, keep
this camera in the camera case.
- Avoid obstructing the lens or the flash when you capture an image.
- This camera is not waterproof.
To avoid dangerous electrical shocks, never hold or operate the camera with wet hands.
- If you use this camera in wet places, such as beach or pool, do not let water or sand get
inside the camera. Doing so may result in failure or may permanently damage the unit.
ƈExtremes in temperature may cause problems.
- If the camera is transferred from a cold to a warm and humid environment, condensation
can form on the delicate electronic circuitry. If this occurs, turn the camera off and wait for at
least 1 hour until all moisture is dispersed. Moisture build up can also occur in the memory
card. If this happens, turn off the camera and remove the memory card. Wait until the
moisture has dispersed.
ŝ108Ş
Important notes
ƈCaution on Using the Lens
- If the lens is subjected to direct sunlight, it could result in discoloration and deterioration of
the image sensor.
- Pay attention not to get fingerprints or foreign substances on the surface of the lens.
- When the lens cover opens, the outer lens that you can see is for auto focus. When using
or cleaning this camera, handle the outer lens with care.
ƈIf the digital camera is not used for a long period, an electric discharge can occur.
It is a good idea to remove the battery and the memory card if you do not intend using the
camera for an extended period of time.
ƈIf the camera is exposed to an electronic interference, it will turn itself off to protect the
memory card.
ƈCamera Maintenance
- Use a soft brush (available from photo stores) to gently clean the lens and LCD assemblies.
If this does not work, lens-cleaning paper with lens cleaning fluid can be used.
Clean the camera body with a soft cloth. Do not allow this camera to come into contact with
solvent materials such as benzol, insecticide, thinners etc. This may damage the body shell
of the camera and also affect its performance. Rough handling can damage the LCD
monitor. Take care to avoid damage and keep the camera in its protective carry case at all
times when not in use.
ƈDo not attempt to disassemble or modify the camera.
ƈUnder certain conditions, static electricity can cause the flash unit to fire. This is not harmful to
the camera and is not a malfunction.
ƈWhen images are uploaded or downloaded(when the charger and USB cable are inserted
into the cradle at the same time), the data transfer may be affected by static electricity.
In this case, disconnect and re-connect the USB cable before trying the transfer again.
ƈBefore an important event or going on a trip, you should check the camera condition.
- Take a picture for testing the camera condition and prepare extra battery.
- Samsung cannot be held responsible for camera malfunctions.
ŝ109Ş
Warning indicator
ƈThere are several warnings that may appear on the LCD display
CARD ERROR!
ϛMemory card error
ƍ Turn off the camera power and turn it on again
ƍ Insert the memory card again
ƍ Insert the memory card and format the memory card (p.99)
MEMORY ERROR!
ϛInternal memory error
ƍ Turn off the camera power and turn it on again
ƍ Format the memory with the memory card removed. (p.99)
CARD LOCKED!
ϛThe memory card is locked
ƍ SD memory card : Slide the write protect switch to the top of the memory card
CARD FULL!/ MEMORY FULL!
ϛThere is insufficient memory capacity to take an image
ƍ Insert a new memory card
ƍ Delete unnecessary image files to free up some memory
NO IMAGE!
ϛThere are no images stored on the memory
ƍ Take images
ƍ Insert a memory card that is holding some images
FILE ERROR!
ϛFile error
ƍ Format the memory card
ϛMemory card error
ƍ Contact a camera service centre
LOW BATTERY!
ϛThere is low battery capacity
ƍ Insert charged battery
ŝ110Ş
Warning indicator
LOW LIGHT!
ϛWhen taking pictures in dark places
ƍ Take pictures in Flash Photography mode.
OUT OF NUMBER
ϛWhen selecting too many printing pages in the PictBridge menu.
ƍ Select printing page within the limitation.
Before contacting a service centre
ƈPlease check the following
The camera doesn’t switch on
ϛThere is low battery capacity
ƍ Insert charged battery (p.17)
ϛBattery are inserted incorrectly with the polarities reversed
ƍ Insert the battery according to the polarity marks (+, -)
ϛThe rechargeable battery is not inserted
ƍ Insert the battery and turn on the camera
The camera power ceases while in use
ϛThe battery are exhausted
ƍ Insert charged battery
ϛThe Camera is turned off automatically
ƍ Turn on the camera power again.
Battery drain quickly
ϛThe Camera is being used in low temperatures
ƍ Keep the camera in warm conditions (i.e. inside a coat or jacket) and only remove it in
order to take images
ŝ111Ş
Before contacting a service centre
Camera does not take images when pressing the Shutter button
ϛThere is insufficient memory capacity
ƍ Delete unnecessary image files
ϛThe memory card has not been formatted
ƍ Format the memory card (p.99)
ϛThe memory card is exhausted
ƍ Insert a new memory card
ϛThe memory card is locked
ƍ Refer to [CARD LOCKED!] error message (p.110)
ϛThe camera’s power is off
ƍ Turn the camera power on
ϛThe battery are exhausted
ƍ Insert charged battery.
ϛBattery is inserted incorrectly with the polarities reversed
ƍ Insert the battery according to the polarity marks (+, -)
The camera suddenly stops working while in use
ϛThe camera was stopped due to a malfunction
ƍ Remove /re-insert battery and switch the camera on
The images are unclear
ϛA picture was taken the subject without setting an appropriate macro mode
ƍ Select an appropriate macro mode to take a clear image.
ϛThe picture was taken with the subject beyond the flash range
ƍ Take a picture within the flash range
ϛThe lens is smudged or dirty
ƍ Clean the lens
The flash does not fire
ϛFlash off mode has been selected
ƍ Dis-engage flash off mode
ϛThe camera mode can’t use the flash
ƍ Refer to the FLASH instruction (p.37)
Incorrect date and time is displayed
ϛThe date and time have been set incorrectly or the camera has adopted the default settings
ƍ Reset the date and time correctly
ŝ112Ş
Before contacting a service centre
The camera buttons do not operate
ϛCamera malfunction
ƍ Remove /re-insert battery and switch the camera on
A card error has occurred while the memory card is in the camera.
ϛIncorrect memory card format
ƍ Re-format the memory card
The images don't play back
ϛIncorrect file name (Violation of DCF format)
ƍ Do not change the image file name
Colour of image is different to the original scene
ϛ White balance or effect setting is incorrect
ƍ Select appropriate White balance and effect
Images are too bright
ϛExposure is excessive
ƍ Reset exposure compensation
No image on external monitor
ϛThe external monitor has not been connected properly with the camera
ƍ Check the connection cables
ϛThere are incorrect files in the memory card
ƍ Insert a memory card that has correct files
When using the PC’s explorer, the [Removable Disk] file does not show
ϛCable connection is incorrect
ƍ Check the connection
ϛThe camera is off
ƍ Turn the camera on
ϛThe operating system is not Windows 98, 98SE, 2000, ME, XP/ Mac OS 10.0 or later.
Alternatively the PC does not support USB
ƍ Install Windows 98, 98SE, 2000, ME, XP/ Mac OS 10.0 or later to PC that supports USB
ϛThe camera driver is not installed
ƍ Install a [USB Storage Driver]
ŝ113Ş
Specifications
Type
Image Sensor Effective Pixel
Total Pixel
1/2.5ůCCD
Approx. 5.0 Mega-pixel
Approx. 5.2 Mega-pixel
SHD Lens f = 4.6 ~ 22.2mm
Focal Length
(35mm film equivalent : 28~135 mm)
Lens
F No.
F 3.3 ~ F 4.8
Still Image mode : 1.0X ~ 5.0X, Movie Clip mode : 1.0X ~ 2.0X
Digital Zoom
Play mode : 1.0X ~ 9.0X (depends on image size)
Viewfinder
LCD Monitor
2.8" Wide color TFT LCD (195,840 dot)
Type
TTL auto focus
Normal : 80cm ~ infinity
Focusing
Range
Macro : 2cm ~ 80cm (Wide), 14cm ~ 80cm (Tele)
Auto Macro : 5cm ~ infinity (Wide), 14cm ~ infinity (Tele)
Type
Mechanical and Electronic shutter
Shutter
Speed
1 ~ 1/2,000 sec. (Night Scene mode : 16 ~ 1/2,000 sec.)
Control
Program AE Metering : Multi, Center-weighted, Spot
Compensation
±2EV (1/3EV steps)
Exposure
ISO Equivalent
Auto, 50, 100, 200, 400
Modes
Auto, Auto & Red-eye reduction, Fill-in, Slow sync, Off
Flash
Range
Wide : 0.3m~ 3.0m, Tele : 0.3m~ 2.0m
Recharging Time Approx. 5 sec.
Sharpness
Soft, Normal, Vivid
Effect
Normal, B&W, Sepia, Red, Green, Blue, Negative, RGB
Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L,
White Balance
Tungsten, Custom
Voice Recording (max. 1 hour)
Voice Recording
Voice Memo in Still Image (max. 10 sec.)
Date Imprinting
Off, Date, Date&Time (user selectable)
Modes : Auto, Program, Scene
* Scene : Night, Portrait, Children, Landscape, Text, Close-up,
Sunset, Dawn, Backlight, Fireworks, Beach & Snow
Still Image
Continuous : Single, Continuous, AEB
Self-timer : 2 sec., 10 sec., Double (10sec. & 2sec.), Remote control (optional)
With audio (recording time : memory capacity dependent)
Shooting
Size : Wide 640x360, 384x216,256x144
STD 640x480, 320x240, 160x120
Frame rate : 30 fps, 15 fps Movie Stabiliser (user selectable)
Movie Clip
Movie Editing (embedded) : Pause during recording, Still Image capture,
Time Trimming
ŝ114Ş
Specifications
Media
File Format
Internal memory : Approx. 24MB flash memory
External memory : SD Card/MMC (Up to 1GB guaranteed)
Still Image : JPEG (DCF), EXIF 2.2, DPOF 1.1, PictBridge 1.0
Movie Clip : MP4 (MPEG-4) Audio : WAV
Wide
Image Size
STD
Storage
Capacity
(24MB)
Image Play
Type
Editing
Interface
Power Source
Dimensions (WxHxD)
Weight
Operating Temperature
Operating Humidity
Camera Driver
Software
Application
Special Features
5M : 2944x1656
3M : 2304x1296
1M : 1280x720
5M : 2592x1944
3M : 2048x1536
1M : 1024x768
4M : 2688x1512
2M : 1792x1008
VGA : 768x432
4M : 2272x1704
2M : 1600x1200
VGA : 640x480
5M : TIFF 1, SUPER FINE 9, FINE 18, NORMAL 27
4M : TIFF 2, SUPER FINE 12, FINE 23, NORMAL 34
3M : TIFF 2, SUPER FINE 14, FINE 28, NORMAL 41
2M : TIFF 4, SUPER FINE 23, FINE 45, NORMAL 64
1M : TIFF 10, SUPER FINE 47, FINE 74, NORMAL 106
VGA : TIFF 24, SUPER FINE 99, FINE 148, NORMAL 185
* These figures are measured under Samsung’s standard conditions and
may vary depending on shooting conditions and camera settings.
Single image, Thumbnails, Slide show, Movie Clip, Album
Trimming, Resizing, Rotating, Effect
Digital output connector : USB 2.0 Audio : Mono
Video output : NTSC, PAL (user selectable)
DC power input connector : 4.2V
Rechargeable battery : 3.7V Li-ion battery (SLB-1237)
AC Charger : DC 4.2V, 750mA (SAC-41)
* Included power source may vary depending on sales region.
99 x 55 x 27mm (excluding the projecting parts of the camera)
169g (without battery and card)
0 ~ 40ŭC
5 ~ 85%
Storage Driver (Windows98/98SE/2000/ME/XP, Mac OS 10.0 or later)
Digimax Master, Digimax Reader, QuickTime Player
5.0 Mega-pixel, 28mm wide-angle and optical 4.8X telephoto zoom
The world’s first*1 2.8” Wide TMR LCD
The fast response – Booting 1.3 sec, Shot-to-shot 1.0 sec.
Elegant design with full metal cover
Easy Charging System
ſ Specifications are subject to change without prior notice.
ſ All trademarks are the property of their respective owners.
* 1 : Among digital cameras , introduced by August of 2005.
ŝ115Ş
Software Notes
Please ensure that you read the instruction manual carefully before use.
ϛThe attached software is a camera driver and image editing software tool for Windows.
ϛUnder no circumstances should all or part of either the software or the user manual be
reproduced.
ϛCopyrights for software are licensed only for use with a camera.
ϛIn the unlikely event of a manufacturing fault, we will repair or exchange your camera.
We cannot, however, be held responsible in any way for damage caused by inappropriate use.
ϛUsing a Hand-made PC or a PC and OS that has not been guaranteed by the manufacturer
is not covered by the Samsung warranty.
ϛBefore reading this manual, you should have a basic knowledge of computers and O/S
(Operating Systems).
System Requirements
For Windows
PC with processor better than Pentium II
For Macintosh
Power Mac G3 or later
450Mz (Pentium 700MHz recommended)
Windows 98/98SE/2000/ME/XP
Mac OS 10.0 or later
Minimum 64MB RAM (XP : 128MB)
Minimum 64MB RAM
200MB of available hard disk space
110MB of available hard-disk space
(1GB recommended)
USB port
USB port
CD-ROM drive
CD-ROM drive
1024x768 pixels, 16-bit colour display
QuickTime player
compatible monitor (24-bit colour display
recommended)
ŝ116Ş
About the software
After inserting the software CD provided with this camera into the CD-ROM drive, the following
window should automatically run.
Before connecting the camera to the PC,
you should first install the camera driver.
ƈ Camera driver : This enables images to transfer between the camera and PC.
This camera uses the USB Storage Driver as the camera driver. You can use the camera as
a USB card reader. After installing the driver and connecting this camera to the PC, you can
find [Removable Disk] in [Windows Explorer] or [My computer]. A USB Storage Driver is
provided only for Windows. A USB Driver for MAC is not included with the Application CD.
You can use the camera with Mac OS 10.0 or later.
ƈ QuickTime Player : The program for playing back QuickTime movies (.MP4). It can also
play video files compressed with MPEG4 codec.
ƈ Digimax Master : This is the all-in-on multi media software solution
You can download, view, edit and save your digital images and movie clips with this
software. This software is only compatible with Windows.
ƈ Digimax Reader : Text recognition program
You can save an image file that was captured in the TEXT mode as a text file with this
program. This software is only compatible with Windows.
INFORMATION
ƃ Be sure to check the system requirements before installing the driver.
ƃ You should allow 5~10 seconds for running the automatic setup program according to the
capability of your computer. If the frame does not show, run the [Windows Explorer] and
select [Samsung.exe] in the CD-ROM Drive root directory.
ŝ117Ş
Setting up the application software
To use this camera with a PC, install the application software first.
After this has been done, the stored images in the camera can be moved to the PC and can be
edited by an image editing program.
INFORMATION
ƃ Close other programs before installing the application software.
ƃ Before installing the application software, disconnect the USB connection.
You can visit the Samsung web-site through the internet.
http://www.samsungcamera.com : English
http://www.samsungcamera.co.kr : Korean
1. Click the [Install] menu in the Auto run frame.
The camera driver is installed automatically.
[Click !]
2. Installation is complete.
Click the [Finish] button.
[Click !]
3. The Software License Agreement window for
DirectX will be displayed.
If you agree to this, select [I accept the agreement]
and click [Next >] button. the window will then
move to the next step. If you disagree, select
[I do not accept the agreement] and click [Cancel]
button.
The installation program will be cancelled.
ŝ118Ş
[Click !]
Setting up the application software
4. A window will open. Click the [Next(N) >] button.
[Click !]
5. DirectX Installation is completed.
Click the [Finish] button and then the
QuickTime installation will be started.
* The system will not reboot even if you click
the [Finish] button.
* The screen shot of step 5 can be different
from the illustration depending on the
system requirements.
[Click !]
6. Click [Next >] to begin installing QuickTime.
[Click !]
7. A Welcome window will appear.
Click [Next >] to proceed to the next screen.
[Click !]
ŝ119Ş
Setting up the application software
8. The Software License Agreement window will open, asking
you to agree to the licensing. Use the button on the bottom
left to select the language of your choice, and then click
[Agree] to accept the license agreement. The installation
will proceed to the next stage. If you do not agree to the
license agreement, click [Disagree]. The installation will be
canceled. If the language of your choice is not listed, please
select [English].
9. A window will open, asking you to select a destination
folder where the files will be copied to. Click [Next >].
To copy the files to another folder, click [Browse..] Browse
to a folder you want to copy the files to.
[Click !]
10. The Choose Installation Type window will open.
Click [Next >].
[Minimum] : Installs required files only.
[Recommended] : Installs required files and the most
commonly used optional files.
[Custom] : Allows you to install only the components you
choose.
[Click !]
11. A window will open, asking you to choose a folder to
which program icons will be added. Click [Next >].
If you want to add the program icons to a different folder,
choose another folder, and then click [Next >].
[Click !]
12. The Enter Registration window appears.
Enter your name and organization in the respective fields,
and then click [Next >].
You do not have to enter a registration number.
[Click !]
ŝ120Ş
Setting up the application software
ſ The QuickTime program folder will appear. 13. The QuickTime Settings – Introduction
window appears. Click [Next >].
Click on the Close button to close the folder.
[Click !]
[Click !]
14. Set the transfer rate for downloading
content from the Internet, and then click
[Next >].
[Click !]
16. Specify the file types you want to
associate with QuickTime. Click [Finish].
[Click !]
15. Set up your browser for QuickTime plug-in.
Click [Next >].
[Click !]
17. Installation is complete. Click [Close].
[Click !]
ŝ121Ş
Setting up the application software
* The QuickTime Player will launch, the readme file will open, and the Step 18 window will open.
Click on the Close 1 and Close 2 buttons to exit the program.
[Close 1 button]
[Close 2 button]
18. A window where you can choose the program you
want to install will appear. Click [Install].
For information on application software, please refer
to page 117.
[Click !]
INFORMATION
ƃ If you select [Exit] at step 18, the application program installation will be cancelled.
19. The Digimax Master installation window will be
displayed as shown alongside.
Click the [Next >] button.
[Click !]
ŝ122Ş
Setting up the application software
20. A window will open. Click the [Next >] button.
[Click !]
INFORMATION
ƃ If you select [Cancel] at step 20, a window for installing Digimax Reader will be displayed.
21. A destination selection window will open.
Click [Next >].
To copy the files to another folder, click [Browse..] and
choose a folder you want.
[Click !]
22. A window will open, asking you to choose a folder to
which program icons will be added.
Click [Next >] button. If you want to choose another
folder, click [Browse..] and choose a folder you want.
[Click !]
23. Click [Install] button and Digimax Master starts installing.
[Click !]
ŝ123Ş
Setting up the application software
24. Digimax Master installation is successfully
completed.
Click the [Finish] button to install Digimax Reader.
* The screen shot of step 24 can be different from
the illustration depending on the system
requirements.
[Click !]
25. A window will be displayed as shown alongside.
Click the [INSTALL] button.
- If you click the [MANUAL] button instructions,
instructions for using Digimax reader will be
displayed.
- Click the [EXIT] button and the Digimax reader
installation will be cancelled and a window for
restarting the computer will appear.
[Click !]
26. A window will open. Click the [Next >] button.
[Click !]
27. The Software License Agreement window will be
displayed. If you agree to this, click [Yes],
the window will then move to the next step.
If you disagree, click [No] and the installation
program will be cancelled.
[Click !]
ŝ124Ş
Setting up the application software
28. A destination selection window will open.
Click the [Next >] button.
To copy the files to another folder, click
[Browse...] and choose a folder you want.
[Click !]
29. Digimax Reader Installation is completed.
The system will not reboot even if the [Yes, I
want to restart the computer now] option is
selected.
[Click !]
30. To apply changes, you must restart the computer.
Select [Yes, I want to restart my computer now], and
then click the [OK] button.
[Click !]
31. After restarting the computer, connect the PC to the camera with the USB cable.
32. Turn the camera power on.
The [Found New Hardware Wizard] will open and
the computer will recognise the camera.
* If your OS is Windows XP, an image viewer
program will open.
If the download window of Digmax Master opens
after starting Digimax Master, the camera driver was
setup successfully.
ŝ125Ş
Setting up the application software
33. If you can see [Removable Disk] under [My computer],
the camera driver installation was successful.
Now you can transfer image files from the camera to
PC via the USB cable.
INFORMATION
ƃ If you have installed the camera driver, The [Found New Hardware Wizard] may not open.
ƃ On a Windows 98 or 98 SE system, the Found New Hardware Wizard dialog box opens
and a window asking you to select a driver file may appear. In this case, specify "USB
Driver" in the CD supplied. (for Windows 98 and 98 SE).
ƃ Before connecting the camera to the PC, You should first install the camera driver.
ƃ After installing the camera driver, you have to restart your PC.
ƃ If you connect the camera to the PC before installing the camera driver, the [Found New
Hardware Wizard] will open.
In this case, cancel the [Found New Hardware Wizard] and disconnect the camera.
Install the camera driver and connect the camera to the PC again.
ƃ Should the computer not find the camera driver after installation, please try one or more of
the following measures.
1. Delete the camera driver (p.130), and re-install the driver.
2. Refer to FAQ (p.142) to check for a possible solution to the problem.
3. If your PC’s central processing unit is VIA chip (This is shown in the USB Host
Controller), download the patch file from the Samsung Camera web page.
(http://www.samsungcamera.com)
ŝ126Ş
Starting PC mode
Ү If you connect the USB cable to a USB port on your PC and then turn on the power, the
camera will automatically switch to "computer connection mode".
Ү In this mode, you can download stored images to your PC through the USB cable.
Ү The LCD monitor is always turned off in PC mode.
Ү The camera status lamp will blink when the files are transferring via the USB connection.
ƈ Connecting the camera to a PC
1. In any mode with the exception of Voice Recording
mode, press the Menu button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [USB] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Use the UP and DOWN buttons to select
[COMPUTER], and then press the OK button.
SETUP
DATE&TIME
COMPUTER
IMPRINT
PRINTER
AF LAMP
SOUND
USB
BACK:
SET:OK
[Using the USB cable with Cradle]
[Using the USB cable with Camera]
ſ If you selected [PRINTER] in Step 4, when you connect the camera to your printer, the
[CONNECTING PRINTER] message will display and the connection will not be established.
In this case, disconnect the USB cable, and then follow the procedure from Step 2 and
onward.
ŝ127Ş
Starting PC mode
ƈ Downloading stored images
You can download the still images stored on the camera to your PC's hard disk and print
them or use a photo editing software to edit them.
1. Connect the camera to your PC with the USB cable.
2. On your computer's desktop display, select
[My computer] and double click [Removable Disk
ƍ DCIM ƍ 100SSCAM].
The image files will then be displayed.
3. Select an image and press the right mouse button.
4. A pop-up menu will open.
Click the [Cut] or [Copy] menu.
- [Cut] : cuts a selected file.
- [Copy] : copies files.
5. Click a folder where you want to paste the file.
ŝ128Ş
Starting PC mode
6. Press the right mouse button and a pop-up menu
will open. Click [Paste].
7. An image file is transferred from the camera to
your PC.
- By using [Digimax Master], you can see the stored images in the memory directly on the
PC monitor and you can copy or move the image files.
ŝ129Ş
Removing the USB Driver for Windows 98SE
ƈ To remove the USB driver, refer to the process shown below.
1. Click [Start ƍ Settings] and click [Control Panel].
2. Double-click [System].
3. Select [Device manager ƍ Hard Disk Controller ƍ
Samsung DSC] and click the [Remove] button.
[Click !]
4. Click the [OK] button.
The camera is removed from the system.
ŝ130Ş
Removing the USB Driver for Windows 98SE
5. Click [Start ƍ Settings ƍ Control Panel] and double
click [Add/Remove programs].
6. The [Add/Remove Programs Properties] window
will open. Click [Digimax L55W] and click the
[Add/Remove] button.
[Click !]
7. Uninstallation is complete. Click the [Finish]
button and the window will disappear.
[Click !]
ŝ131Ş
Removable Disk
ƈ To use this camera as a Removable Disk, install (p.118) the USB Driver.
1. Before turning the camera power on, connect the camera to the PC with the USB cable.
2. Click [Removable Disk] under [My computer] or [Windows Explorer].
3. Image files stored in the Removable Disk (DCIM ƍ 100SSCAM) can be transferred to the PC.
INFORMATION
Important information whilst using the Removable Disk
ƃ The [Removable Disk] indicator will not show when the camera power is off or the USB
cable is removed.
ƃ We recommend that you should copy the images to the PC to view them. Opening
images directly from the removable disk may be subject to unexpected disconnection.
ƃ When uploading images from the PC to the camera, ensure that the uploaded file names
are not the same as those already stored on the memory.
ƃ When you upload a file that is not taken by this camera to the Removable Disk, the [FILE
ERROR!] message will be displayed on the LCD monitor in the PLAY mode, and nothing
is displayed in THUMBNAIL mode.
ƃ The camera status lamp will blink, when a file is
transferred (copy or deletion) between the PC and
the camera. Do not remove the USB cable until the
lamp stops blinking.
To remove the USB cable in Windows 2000/ME/XP,
use the [Unplug or Eject Hardware] icon on the task
bar.
ŝ132Ş
Removing the removable disk
ƈ Windows 98 / 98SE
1. Check whether the camera and PC are transferring a file.
If the camera status lamp blinks, you have to wait until the lamp illuminates.
2. Unplug the USB cable.
ƈ Windows 2000 / ME / XP
(The illustrations may be different from the real display in accordance with the Windows O/S.)
1. Check whether the camera and PC are transferring a file.
If the camera status lamp blinks, you have to wait until the lamp illuminates.
2. Double-click the [Unplug or Eject Hardware]
icon on the task bar.
[Double-click!]
3. The [Unplug or Eject Hardware] window will
open. Select the [USB Mass Storage Device]
and click the [Stop] button.
[Click !]
4. The [Stop a Hardware device] window will open.
Select the [USB Mass Storage Device] and click
the [OK] button.
[Click !]
5. A [Safe to Remove Hardware] window will open.
Click the [OK] button.
[Click !]
ŝ133Ş
Removing the removable disk
6. A [Unplug or Eject Hardware] window will open.
Click the [Close] button and the removable disk
will be removed safely.
7. Unplug the USB cable.
[Click !]
Setting up the USB Driver for MAC
1. A USB Driver for MAC is not included with the software CD as MAC OS supports the
camera driver.
2. Check the MAC OS. You can check the MAC OS version during MAC OS start-up.
This camera is compatible with MAC OS 10.0 or later.
3. Connect the camera to the Macintosh and turn the camera power on.
4. A new icon will be displayed on the desktop after connecting the camera to the MAC.
Using the USB Driver for MAC
1. Double click a new icon on the desktop and the folder in the memory will be displayed.
2. Select an image file and copy or move it to MAC.
CAUTION
ƃ For Mac OS 10.0 or later : First complete uploading from computer to camera and then
remove the removable disk with the Extract command.
ŝ134Ş
Digimax Master
ƈ You can download, view, edit and save your images and movies with this software. This
software is only compatible with Windows except for the Windows 98.
ƈ To start the program, click [Start ƍ Programs ƍ Samsung ƍ Digimax Master].
ƃ Downloading images
1. Connect the camera to your PC.
2. A window for downloading images will display after
connecting the camera and your PC.
- To download the captured images, select the
[Select All(A)] button.
- Select desired folder in the window and click the
[Select All(A)] button. You can save captured
images and selected folder.
- If you click the [Cancel] button, downloading will be
cancelled.
[Click !]
3. Click [Next(N) >] button.
[Click !]
ŝ135Ş
Digimax Master
4. Select a destination and make a folder to save
downloaded images and folders.
- Folder names can be made in order of date and
images will be downloaded.
- Folder name will be made as you want and images
will be downloaded.
- After selecting a folder that was made before,
images will be downloaded.
5. Click [Next(N) >] button.
[Click !]
6. A window will open as shown alongside.
The destination of the selected folder will be
displayed on the upper side of the window.
Click the [Start] button to download the images.
[Click !]
7. Downloaded images will be displayed.
ŝ136Ş
Digimax Master
ƃ Image viewer : You can view the stored images.
‫ڹ‬
‫ڽ‬
‫ھ‬
‫ڿ‬
‫ں‬
‫ڻ‬
‫ڼ‬
- Image viewer functions are listed below.
‫ ڹ‬Menu bar : You can select menus.
File, Edit, View, Tools, Change functions, Auto download, help, etc.
‫ ں‬Image selection window : You can select the desired images in this window.
‫ ڻ‬Media type selection menu : You can select image viewer, image edit and movie edit
functions in this menu.
‫ ڼ‬Preview window : You can preview a image or a movie clip and check the multi media
information.
‫ ڽ‬Zoom bar : You can change preview size.
‫ ھ‬Folder display window : You can see the folder location of the selected image.
‫ ڿ‬Image display window : Images of the selected folder are displayed.
ſ Refer to the [Help] menu in Digimax Master for further information.
ŝ137Ş
Digimax Master
ƃ Image edit : You can edit the still image.
‫ڹ‬
‫ڼ‬
‫ں‬
‫ڻ‬
- Image edit functions are listed below.
‫ ڹ‬Edit menu : You can select the following menus.
[Tools]
: You can resize or crop the selected image. See the [Help] menu.
[Adjust] : You can modify image quality. See the [Help] menu.
[Retouch] : You can change image or insert effects on the image. See the [Help] menu.
‫ ں‬Drawing tools : Tools for editing an image.
‫ ڻ‬Image display window : a selected image displays in this window.
‫ ڼ‬Preview window : You can preview the changed image.
ſ A still image edited with Digimax Master can’t be played back on the camera.
ſ Refer to the [Help] menu in Digimax Master for further information.
ŝ138Ş
Digimax Master
ƃ Movie edit : You can get the still image, movie clip, narration, music files together in a movie clip.
‫ڹ‬
‫ں‬
- Movie clip edit functions are listed below.
‫ ڹ‬Edit menu : You can select the following menus.
[Add Media] : You can add other media elements to a movie.
[Edit Clip] : You can change the brightness, contrast, colour and saturation.
[Effects]
: You can insert an effect.
[Set Text] : You can insert texts.
[Narrate] : You can insert a narration.
[Produce] : You can save the edited multi media as a new file name.
You can insert multi media in this window. You can select AVI, Windows
media (wmv), Windows media (asf) and movie clip for this camera (AVI,
MPEG-4) file types.
‫ ں‬Frame display window : You can insert multi media in this window.
ſ Some movie clips that was compressed with a codec that is not compatible with the Digimax
Master can’t play back in the Digimax Master.
ſ Refer to the [Help] menu in Digimax Master for further information.
ŝ139Ş
Digimax Reader
ƈ Digimax Reader is a Text recognition program. You can save an image file that is captured in
the Text mode, as a text file with this program.
This software is only compatible with Windows.
ƈ To start the program, click [Start ƍ Programs ƍ Digimax Reader Eng].
The following screen will appear.
ƈ How to use the Digimax Reader
1. Connect the camera and the PC with a USB cable and download the images that were
stored in the camera to the PC.
* Please see page 127~129 for details on Connecting a camera and PC, Downloading
images.
2. Run the Digimax Reader.
3. Click the Open (
ŝ140Ş
) icon as shown alongside.
Digimax Reader
4. Select the image you want to save as a text file.
* Only an image that was taken with a SAMSUNG
camera can be opened.
5. Click the Area Analysis (
) icon to scan the image.
6. Part of the image you selected will be displayed as
shown.
7. Click the Character Recognition (
) icon.
The part selected in the previous step will be
recognized as text.
)
8. To save the section as a text, click the Save (
icon. A window as shown alongside will be displayed.
ŝ141Ş
Digimax Reader
9. Select the file type that you want.
Selectable file types : *.TXT, *.HWP, *.DOC, *.RTF
INFORMATION
ƃ To get an image that can be recognized as a text :
- Keep a distance that you can capture the image clearly between the subject and the camera.
- The subject need to be centered.
- Avoid camera shake to get a good image.
ƃ Refer to the [Help] menu in Digimax Reader for further information.
FAQ
ƈ Please check the following if the USB connection malfunctions.
[Case 1]
The camera power is off.
ƍ Turn the camera power on.
[Case 2]
USB Driver is not installed correctly.
ƍ Install the USB Driver correctly. Refer to page 118.
[Case 3]
The USB cable is not connected or you are using a cable with an incorrect
specification.
ƍ Use a USB cable with the correct specification.
[Case 4]
The camera is not recognized by your PC.
Sometimes, the camera may appear under [Unknown Devices] in Device
Manager.
ƍ Install the camera driver correctly.
Turn off the camera, remove the USB cable, plug in the USB cable again, and
then turn on the camera.
ŝ142Ş
FAQ
Case 5]
There is an unexpected error during file transfer
ƍ Turn the camera power off and on again. Transfer the file again.
[Case 6]
How do I know my computer supports a USB Interface?
ƍ Check the USB port in your computer or keyboard.
ƍ Check the OS version. A USB Interface is available in Windows 98, 98SE,
2000, ME, XP.
ƍ Check [Universal Serial Bus controllers] in Device Manager. Do the following to
checks [Universal Serial Bus controllers].
Win 98/ME
: Follow [Start ƍ Settings ƍ Control Panel ƍ System ƍ
Device Manager ƍ Universal Serial Bus controllers].
Win 2000
: Follow [Start ƍ Settings ƍ Control Panel ƍ System ƍ
Hardware ƍ Device Manager ƍ Universal Serial Bus
controllers].
Win XP
: Follow [Start ƍ Control Panel ƍ Performance and
Maintenance ƍ System ƍ Hardware ƍ Device Manager
ƍ Universal Serial Bus controllers].
There must be USB Host Controller and USB root hub under [Universal Serial
Bus controllers].
In addition, double-click on the USB Universal Host Controller and the USB
Root Hub to check if the Device Status states "This device is working properly".
If the Device Status says the device is "not working properly", click the "Driver"
tab and then click [Update Driver] or [Reinstall Driver].
ƍ When all the conditions mentioned above are met, the computer can support
the USB interface.
[Case 7]
When using the USB hub.
ƍ There may be a problem in connecting the camera to the PC through the USB
hub if the PC and the hub are not compatible. Wherever possible, connect the
camera to the PC directly.
[Case 8]
Are other USB cables connected to the PC?
ƍ The camera may malfunction when it is connected to the PC at the same time
as another USB cable. In this case, disconnect the other USB cable, and
connect only one USB cable to the camera.
ŝ143Ş
FAQ
[Case 9]
When I open the Device Manager (by clicking Start ƍ (Settings) ƍ Control
Panel ƍ (Performance and Maintenance) ƍ System ƍ (Hardware) ƍ Device
Manager), there areèUnknown DeviceséorèOther Deviceséentries with a
yellow question mark (?) beside them or devices with an exclamation mark (!)
beside them.
ƍ Right-click on the entry with the question (?) or exclamation (!) mark and select
"Remove". Restart the PC and connect the camera the again. For Windows 98
PC, remove the camera driver also, restart the PC, and then reinstall the
camera driver.
ƍ Double-click on the entry with the question (?) or exclamation (!) mark, click the
"Driver" tab, and click [Update Driver] or [Reinstall Driver]. If a message appears
asking you to specify the location of the appropriate device driver, specify "USB
Driver" in the CD supplied.
[Case 10]
In some security programs (Norton Anti Virus, V3, etc.), the computer may not
recognise the camera as a removable disk.
ƍ Stop the security programs and connect the camera to the computer. Refer to
the security program instructions about how to stop the program.
ƈ When the movie clip doesn’t play back on the PC
ſ When the movie clip recorded by the camera doesn’t play back on the PC, the causes are
mostly due to the codec installed on the PC.
ƃ When the DirectX 9.0 or later is not installed
ƍ Install the DirectX 9.0 or later
1) Insert the CD provided with the camera
2) Run the windows explorer and select [CD-ROM drive:\USB Driver\DirectX 9.0] folder and
click the DXSETUP.exe file.The DirectX will be installed. Visit the following site for
downloading the DirectX.http://www.microsoft.com/directx
ŝ144Ş
FAQ
ƈ If a PC (Windows 98) stops responding while the camera and PC are connected repeatedly
ƍ If a PC (Windows 98) is turned on for a long time and the camera is connected repeatedly
the PC may not recognise the camera. In this case, re-start the PC.
ƈ If a PC connected with the camera stops responding while Windows is starting.
ƍ In this case, disconnect the PC and the camera and Windows will start.
If the problem happens continuously, set the Legacy USB Support to disable and re-start
the PC. The Legacy USB Support is in the BIOS setup menu. (The BIOS setup menu
differs from the PC manufacturers and some BIOS menus don’t have Legacy USB
Support) If you can’t change the menu by yourself, contact to the PC manufacturer or
BIOS manufacturer.
ƈ If the movie clip can’t be deleted, removable disk can’t be extracted or an error message
displays during the file transfer.
ƍ If you install only the Digimax Master, the problems mentioned above occasionally
happen.
- Close the Digimax Master, program by clicking the Digimax Viewer icon on the Taskbar.
- Install all the application programs included in the software CD.
ŝ145Ş
MEMO
ŝ146Ş
MEMO
ŝ147Ş
SAMSUNG TECHWIN CO., LTD.
OPTICS & DIGITAL IMAGING DIVISION
145-3, SANGDAEWON 1-DONG, JUNGWONGU,
SUNGNAM-CITY, KYUNGKI-DO, KOREA
462-121
TEL : (82) 31-740-8086,8088, 8090, 8092, 8099
FAX : (82) 31-740-8398, 8111
www.samsungcamera.com
SAMSUNG OPTO-ELECTRONICS AMERICA, INC.
HEADQUARTERS
40 SEAVIEW DRIVE, SECAUCUS, NJ07094, U.S.A.
TEL : (1) 201-902-0347
FAX : (1) 201-902-9342
WESTERN REGIONAL OFFICE
18600 BROADWICK ST.,
RANCHO DOMINGUEZ, CA 90220, U.S.A.
TEL : (1) 310-900-5263/5264
FAX : (1) 310-537-1566
www.samsungcamerausa.com
SAMSUNG OPTO-ELECTRONICS UK LIMITED
SAMSUNG HOUSE
1000 HILLSWOOD DRIVE
HILLSWOOD BUSINESS PARK
CHERTSEY KT16 OPS U.K.
TEL : 00800 12263727
(free for calls from UK only)
UK Service Hotline : 01932455320
www.samsungcamera.co.uk
SAMSUNG OPTO-ELECTRONICS GMBH
AM KRONBERGER HANG 6
D-65824 SCHWALBACH/TS., GERMANY
TEL : 49 (0) 6196 66 53 03
FAX : 49 (0) 6196 66 53 66
www.samsungcameras.de
SAMSUNG FRANCE S.A.S.
BP 51 TOUR MAINE MONTPARNASSE
33, AV .DU MAINE
75755, PARIS CEDEX 15, FRANCE
HOTLINE PHOTO NUMÉRIQUE :
00 800 22 26 37 27(Numéro Vert-Appel Gratuit)
TEL : (33) 1-4279-2200
FAX : (33) 1-4538-6858
www.samsungphoto.fr
SAMSUNG TECHWIN MOSCOW OFFICE
RUSSIA, 125167, MOSCOW LENNINGRADSKY,
PR-KT, 37-A, KORP14
TEL : (7) 095-258-9299/96/98
FAX : (7) 095-258-9297
http://www.samsungcamera.ru
TIANJIN SAMSUNG OPTO-ELECTRONICS CO.,LTD.
7 PINGCHANG ROAD NANKAI DIST., TIANJIN
P.R CHINA
POST CODE:300190
TEL : (86) 22-2761-4599
FAX : (86) 22-2769-7558
www.samsungcamera.com.cn
ҧ Internet address - http : //www.samsungcamera.com/
The CE Mark is a Directive conformity
mark of the European Community (EC)
6806-2930

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement