advertisement
▼
Scroll to page 2
of 48
COLOUR TELEVISION Owner’s Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. ON-SCREEN MENUS PICTURE IN PICTURE (PIP) TELETEXT / TELEWEB (OPTION) Safety Instructions ENG ◆ Do not expose the television to extreme temperature conditions or to extreme humidity conditions. ◆ Do not expose the television to direct sunlight and other sources of heat. ◆ Do not expose the television to any liquids. ◆ Never put objects of any kind into the television, and do not place a water-containing vessel on the television. ◆ During a storm conditions (especially when there is lightning) unplug the television from the mains socket and aerial. ◆ Do not step on or twist the power cord. ◆ Do not overload wall outlets or extension cords as this can result in a risk of fire or electric shock. ◆ Please use a soft and dry cloth (not containing volatile matter) when you clean the TV. ◆ If the television is broken, do not try to repair it yourself. Contact qualified service personnel. ◆ If the remote control is not used for a long period of time, remove the batteries and store it in a cool, dry place. ◆ Do not drop the remote control. This device is not for use in industrial environments. Caution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO PREVENT ELECTRICAL SHOCK, DO NOT REMOVE REAR COVER, NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. 2 The lightning flash and arrow head within the triangle is a warning sign alerting you of “dangerous voltage” inside the product. The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product. ☛ The main voltage is indicated on the rear of the TV set and the frequency is 50 or 60Hz. ENG Contents (continued) ◆ FOREWORD ■ ■ Safety Instructions ......................................................................................... Caution .......................................................................................................... 2 2 ◆ CONNECTING AND PREPARING YOUR TELEVISION ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Control Panel of Your Television ................................................................... Connection Panel of Your Television ............................................................ Connecting to an Aerial or Cable Television Network ................................... Connecting a Satellite Receiver or Decoder.................................................. Connecting Additional Speakers ................................................................... Inserting the Batteries in the Remote Control................................................ Infrared Remote Control ................................................................................ Switching Your Television On and Off........................................................... Placing Your Television in Standby Mode ..................................................... Becoming Familiar with the Remote Control ................................................. Plug & Play Feature....................................................................................... Choosing Your Language.............................................................................. 5 6 7 7 8 8 9 10 10 11 12 13 ◆ SETTING THE CHANNELS ■ ■ ■ ■ ■ ■ Storing Channels Automatically..................................................................... Sorting the Stored Channels ......................................................................... Storing Channels Manually............................................................................ Assigning Names to Channels ...................................................................... Activating the Child Lock and Skipping Unwanted Channels ........................ Selecting a Channel by Information............................................................... 14 15 16 18 19 20 ◆ USING YOUR TELEVISION (continued) ■ ■ ■ ■ ■ ■ ■ ■ Changing the Picture Standard ..................................................................... Adjusting the Picture Settings........................................................................ Extra Picture Settings .................................................................................... - Scan Mode - Digital NR - Tilt - Size - Blue Screen Using the LNA (Low Noise Amplifier) Feature............................................... Freezing the Current Picture ......................................................................... Changing the Sound Standard ...................................................................... Adjusting the Sound Settings ........................................................................ Adjusting Your Headphone Preferences ....................................................... 3 21 21 22 23 23 24 24 25 ENG Contents ◆ USING YOUR TELEVISION ■ ■ ■ ■ ■ ■ ■ ■ Setting the Dolby Digital ................................................................................ Setting the External Digital Sound................................................................. Selecting the Sound Mode (depending on the model) .................................. Setting the Sleep Timer ................................................................................. Setting the Time and Switching the TV On/Off Automatically ....................... Viewing Pictures From External Sources ...................................................... Redirecting an Input to the External Output .................................................. Viewing the Picture In Picture (PIP) .............................................................. 26 28 29 30 31 32 33 34 ◆ USING THE TELETEXT FEATURE ■ ■ ■ ■ ■ Teletext Feature (depending on the model) .................................................. Displaying the Teletext Information ............................................................... Selecting Display Options.............................................................................. Selecting the Teletext Source (Option).......................................................... Select a Teletext Page .................................................................................. 36 37 37 38 39 ◆ USING THE TELEWEB FEATURE ■ ■ TeleWeb Feature (depending on the model)................................................. Using the TeleWeb Menu after Displaying the TeleWeb............................... 40 41 ◆ ADDITIONAL INFORMATION AND CONNECTIONS ■ ■ ■ ■ ■ ■ ■ ■ ■ Connecting to the External Input/Output ....................................................... Connecting to the DVD Input......................................................................... Connecting to the Audio Outputs................................................................... Connecting to the Digital Audio Inputs .......................................................... Connecting Headphones ............................................................................... Connecting to the Audio/Video Input ............................................................. Connecting to the S-Video Input.................................................................... Connecting to the PC Input ........................................................................... SCART Connector Wiring (EXT1, EXT2 or EXT3) ........................................ 42 42 43 43 43 44 44 45 46 ◆ RECOMMENDATIONS FOR USE ■ ■ Wiring the Mains Power Supply Plug (UK Only)............................................ Troubleshooting: Before Contacting Service Personnel................................ Symbols Press 4 ☛ Important ➢ Note 46 47 Control Panel of Your Television ➢ The actual configuration on your TV may be different, depending on your model. ENG Input Source Selection Menu Display Remote Control Sensor Volume Increase Volume Decrease Power On/Off Next Channel Previous Channel ➣ Using the Buttons on the Panel If the remote control no longer works or you have lost it, you can use controls on the panel of the TV to: ◆ Switch on the TV when it is in Standby mode and select channels ( ▲ C/P. ▼) ◆ Access the local menu ( LOCAL MENU ) ◆ Adjust the volume ( + -) ◆ Switch among Video input modes ( TV/VIDEO ) 5 Connection Panel of Your Television ➢ ENG The actual configuration on your TV may be different, depending on your model. Audio Input (R, L) Video Input S-Video Input Headphone connector PC Input Rear of the TV ➣ ☛ For further details about connection, refer to pages 42~45. Whenever you connect an audio or video system to your television, ensure that all elements are switched off. Refer to the documentation supplied with your equipment for detailed connection instructions and associated safety precautions. 6 Connecting to an Aerial or Cable Television Network ENG To view television channels correctly, a signal must be received by the set from one of the following sources: ◆ An outdoor aerial ◆ A cable television network ◆ A satellite network 1 In the first three cases, connect the aerial or network input cable to the 75Ω coaxial socket on the rear of the television. 2 If you are using an indoor aerial, you may need to turn it when tuning your television until you obtain a picture that is both sharp and clear. For further details, refer to: ◆ “Storing Channels Automatically” on page 14 ◆ “Storing Channels Manually” on page 16 Rear of the TV 75Ω or VHF/UHF Cable Television Network Connecting a Satellite Receiver or Decoder In order to watch television programmes broadcast via a satellite network, you must connect a satellite receiver to the rear of TV. Also, in order to descramble a coded transmission signal, you must connect a decoder to the rear of TV. ◆ Using a SCART cable Connect the receiver (or decoder) SCART cable to one of the SCART connectors on the rear of the television. Rear of the TV ◆ Using a coaxial cable Connect a coaxial cable to the: - Receiver (or Decoder) output socket. - Television aerial input socket. ➢ If you wish to connect both a satellite receiver (or decoder) and a VCR, you should connect the: ◆ Receiver (or Decoder) to the VCR ◆ VCR to the television Otherwise, connect the receiver (or decoder) directly to the television. Satellite receiver/Decoder 7 Connecting Additional Speakers ENG Rear of the TV To take advantage of the surround sound system, connect additional speakers. The speaker terminals are located on the rear of the television: ◆ Two for the left-hand surround speaker (marked L) ◆ Two for the right-hand surround speaker (marked R) ◆ Two for the center speaker (marked C) ◆ One for the woofer speaker (marked WOOFER) ➢ To improve the quality of the sound, connect the: ◆ Red wire to the red terminal ◆ Black wire to the black terminal ➢ The external woofer speaker MUST have 4Ω rating. Inserting the Batteries in the Remote Control You must insert or replace the batteries in the remote control when you: ◆ Purchase the television ◆ Find that the remote control is no longer operating correctly 8 1 Remove the cover on the rear of the remote control by pressing the symbol downwards and then pulling firmly to remove it. 2 Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking care to respect the polarities: ◆ - on the battery against - on the remote control ◆ + on the battery against + on the remote control 3 Replace the cover by aligning it with the base of the remote control and pressing it back into place. Infrared Remote Control ENG SELECT CHANNEL BY INFORMATION DOLBY PRO LOGIC DISPLAY AUTOMATIC SWITCH-OFF VCR OR DVD FUNCTIONS; - STOP - REWIND - PLAY/PAUSE - FAST FORWARD Power TELEVISION STAND-BY PIP FUNCTIONS; - PIP ON/OFF - INTERCHANGE THE MAIN AND SUB PICTURE (SWAP) - LOCATION SELECTION (LOCATE) - CHANNEL SELECTION (P▲/▼) - SIZE SELECTION (SIZE) - FREEZE THE PICTURE (STILL) - CHANNEL SCAN (SCAN) - MULTI PIP (MULTI) - INPUT SOURCE SELECTION (TV/VIDEO) MAKE THE REMOTE CONTROL WORKS FOR TV, VCR, CABLE, DVD PLAYER. DIRECT CHANNEL SELECTION ➣ EXTERNAL INPUT SELECTION/ VGA SELECTION TUNER/CABLE NETWORK SELECTION The remote control might not be compatible with the TV manufactured by another company. TEMPORARY SOUND SWITCH-OFF NEXT CHANNEL/ TELETEXT NEXT PAGE/ TELEWEB FORWARD MENU DISPLAY/ TELETEXT INDEX CONTROL THE CURSOR IN THE MENU/ TELEWEB SEARCH VOLUME DECREASE VOLUME INCREASE CHANGE CONFIRMATION TELETEXT SUB-PAGE/ CURRENT TIME DISPLAY/ TELEWEB HOME PAGE TELETEXT DISPLAY ON-SCREEN DISPLAY/ TELETEXT REVEAL TELEWEB DISPLAY (DEPENDING ON THE MODEL) SOUND EFFECT SELECTION PREVIOUS CHANNEL/ TELETEXT PREVIOUS PAGE/ TELEWEB BACKWARD SOUND MODE SELECTION/ TELETEXT SUB-PAGE PICTURE SIZE/ VGA PICTURE SHIFT/ TELETEXT SIZE SELECTION SCAN MODE SELECTION PICTURE EFFECT SELECTION FASTEXT TOPIC SELECTION ➢ The performance of the remote control may be affected by bright light. 9 Switching Your Television On and Off ENG The mains lead is attached to the rear of your television. ☛ Front of the TV 1 Plug the mains lead into an appropriate socket. ➢ 2 If you have purchased this television in the United Kingdom, refer to page 46 for further instructions on plug wiring. The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz. Press the “ ” button (On/Off) on the front of the television. Result: 3 The Standby indicator on the front of the television lights up. Press the POWER ( ) button on the remote control to switch the television on. Result: The programme that you were watching last is reselected automatically. you have not yet stored any channels, No clear picture ➣ Ifappears. Refer to “Storing Channels Automatically” on page 14 or “Storing Channels Manually” on page 16. 4 To switch your television off, press the “ ” button (On/Off) again. Placing Your Television in Standby Mode Your television can be placed in Standby mode, in order to reduce: ◆ Power consumption ◆ Wear of the cathode ray tube The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example). 1 Press the POWER ( ) button on the remote control. Result: 2 The screen is turned off and the Standby indicator on the front of the television lights up in red. To switch the television back on, simply press the POWER ( ) button again or a numeric button. can also switch on by pressing the TV or channel up/ ➣ You down (P / ) button. ☛ 10 Do not leave your television in Standby mode for long periods of time (when you are away on holiday, for example). Turn your television off by pressing the “ ” button (On/Off) on the front of the television. It is best to unplug the set from the mains and aerial. Becoming Familiar with the Remote Control ENG The remote control is used mainly to: ◆ Change channels and adjust the volume ◆ Set up the television using the on-screen menu system The following table presents the most frequently used buttons and their functions. Button P P Viewing Function Menu Function Used to display the next stored channel. - Used to display the previous stored channel. - ➢ to For double digit channels, the second digit must be pushed immediately after the first. Failure to do this will result in a single digit channel being displayed. Used to display the corresponding channels. Used to decrease the volume. - Used to increase the volume. - MUTE Used to switch the sound off temporarily. To turn the sound back on, press this button again, or press the - or + button. MENU Used to display the on-screen menu system. Used to return to the previous menu or normal viewing. - Used to: ◆ Display a submenu containing selections for the current menu option ◆ Search forwards/ backwards manually for channels ◆ Increase/reduce a menu option value - Used to confirm your choice. Used to switch the television on when it is in Standby mode. Used to exit from the menu system and return to normal viewing directly. TV Power ➣ 11 Plug & Play Feature ENG When the television is initially powered ON, several basic customer settings proceed automatically and subsequently. The following settings are available. Plug & Play 1 Language Result: English ЬА Hrvatski Čeština Netherland Français Sel.: If the television is in Standby mode, press the POWER button ( ) on the remote control. Store: 2 Select the appropriate language by moving the joystick up or down. 3 Press the joystick button ( Result: 4 Antenna input check Austria Belgium Croatia Denmark Finland France 6 Press the joystick button ( 7 ➢ Austria 8 P0 ----Exit:TV Enjoy viewing your new TV. 12 ) to confirm your choice. The ATM (or Auto Store) menu is displayed (depending on the model). To start the search, press the joystick button ( Result: Store: 0% 0 MHz The Country (or Area) menu is displayed (depending on the model). Select your country by moving the joystick up or down. ATM Country The message Antenna input check is displayed. 5 Result: Sel.: ) to confirm your choice. Make sure that the antenna is connected to the TV, and then press the joystick button ( ). Result: Country The message Plug & Play is displayed. It flickers for a little while, and then the Language menu is automatically displayed. ). The search will end automatically. Channels are sorted and stored in an order which reflects their position in the frequency range, (with lowest first and highest last). The programme originally selected is then displayed. To stop the search before it has finished or return to normal viewing, press the TV ( ) button. When it has finished, the message Enjoy viewing your new TV is displayed, and then the channel which has been stored will be activated. Plug & Play Feature (continued) ENG If you want to reset this feature... 1 Press the MENU button. The main menu is displayed. Result: 2 Move the joystick up or down until the Function is selected. The options available in the Function group are Result: displayed. 3 Move the joystick right. 4 Move the joystick up or down until the Plug & Play option is selected. Move the joystick right. Result: The message Plug & Play is displayed. Function 5 For further details on how to set, refer to the opposite page. Language Time Teletext Source Plug & Play AV Setup LNA English Main Move: Enter: Choosing Your Language When you start using your television for the first time, you must select the language which will be used for displaying menus and indications. 1 2 3 Function Language Time Teletext Source Plug & Play AV Setup LNA Press the MENU button. The main menu is displayed. Result: Move the joystick up or down until the Function is selected. The options available in the Function group are Result: displayed. English Main Move: Enter: Move the joystick right. The Language option is selected. Result: Language 4 Move the joystick right again. The languages available are listed. Result: 5 Select the appropriate language by moving the joystick up or down. 6 Press the joystick button ( 7 When you are satisfied with your choice, press the TV ( to return to normal viewing. ) to confirm your choice. English ЬА Hrvatski Čeština Netherland Français Sel.: Store: ) button 13 Storing Channels Automatically ENG Channel Country ATM Manual Store Sort Name Channel Edit Austria Move: You can scan for the frequency ranges available to you, (availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch. 1 Press the MENU button. The main menu is displayed. Result: 2 Move the joystick up or down until the Channel is selected. The options available in the Channel group are Result: displayed. 3 Move the joystick right. The Country (or Area) option is selected. Result: 4 Move the joystick right again. The countries (or areas) available are listed. Result: 5 Select your country (or area) by moving the joystick up or down. ➢ If you have selected the Others option but do not wish to scan the PAL frequency range, store the channels manually (see page 16). 6 Press the joystick button ( 7 Press the MENU button. The options available in the Channel group are Result: displayed again. 8 Move the joystick up or down until the ATM (or Auto Store) is selected. Move the joystick right. The ATM (or Auto Store) menu is displayed. Result: 9 Press the joystick button ( Enter: Country Austria Belgium Croatia Denmark Finland France Sel.: Store: Area Asia/W.Europe CIS/E.Europe China Hongkong/UK Australia NZ/Indonesia Sel.: Store: Channel Country ATM Manual Store Sort Name Channel Edit Austria Result: Move: Enter: ➢ ATM Country Austria 10 0% 0 MHz P0 ----- Sel.: Start: Auto Store Area Asia/W.Europe 0% 0 MHz P0 ----- Sel.: Start: 14 ) to confirm your choice ) to start the search. The search will end automatically. Channels are sorted and stored in an order which reflects their position in the frequency range, (with lowest first and highest last). The programme originally selected is then displayed. To stop the search before it has finished, press the TV ( button. When the channels have been stored, you can: ◆ Sort them in the order required (see page 15) ◆ Clear a channel (see page 19) ◆ Fine-tune channel reception if necessary (see page 17) ◆ Assign a name to the stored channels (see page 16) ◆ Activate/deactivate the Digital Noise Reduction feature (see page 22) ) Sorting the Stored Channels ENG This operation allows you to change the programme numbers of stored channels. This operation may be necessary after using ATM. You can delete those channels you do not want to keep. 1 Press the MENU button. The main menu is displayed. Result: 2 Move the joystick up or down until the Channel is selected. The options available in the Channel group are Result: displayed. 3 Country ATM Manual Store Sort Name Channel Edit Austria Move: Enter: Move the joystick right. 4 Move the joystick up or down until the Sort is selected. Move the joystick right. The Sort menu is displayed. Result: 5 Select the channel that you wish to move by moving the joystick up or down. Move the joystick right. 6 Select the number of the programme to which the channel is to be moved by moving the joystick up or down. Move the joystick left. The channel is moved to its new position and all other Result: channels are shifted accordingly. 7 Channel Repeat Steps 5 to 6 until you have moved all the channels to the required programme numbers. Sort 1 2 3 4 5 6 7 8 9 10 11 12 13 --------------------C 16 ----------------------------- 1 2 3 4 5 6 7 8 9 10 11 12 13 --------------------C 16 ----------------------------- Move: Sel.: Exit:TV Sort Move: Add: Exit:TV 15 Storing Channels Manually (continued) ENG You can store up to television channels, including those received via cable networks. Channel Country ATM Manual Store Sort Name Channel Edit Austria ◆ Whether or not to store each of the channels found ◆ The programme number of each stored channel which you wish to identify Move: Enter: Manual Store Prog.No. Color System Sound System Search Channel Fine tune Move: P1 AUTO BG 409MHz C 16 Sel.: Store: Manual Store Prog.No. Color System Sound System Search Channel Fine tune Move: When storing channels manually, you can choose: 1 Press the MENU button. The main menu is displayed. Result: 2 Move the joystick up or down until the Channel is selected. The options available in the Channel group are Result: displayed. 3 Move the joystick right. 4 Move the joystick up or down until the Manual Store is selected. Move the joystick right. The Manual Store menu is displayed. Result: 5 If necessary, select the broadcasting standard required. Move the joystick up or down until the Color System is selected and move the joystick left or right. The color standards are displayed in the following order (depending on the model). P1 AUTO BG 409MHz C 16 Sel.: ➞ AUTO ➞ PAL ➞ SECAM or Store: ➞ AUTO ➞ NTSC3.58 ➞ NTSC4.43 ➞ PAL60 Manual Store Prog.No. Color System Sound System Search Channel Fine tune Move: P1 AUTO BG 409MHz C 16 Sel.: 16 Store: 6 Move the joystick up or down until the Sound System is selected and move the joystick left or right. The sound standards are displayed in the following order (depending on the model). ➞ BG ➞ DK ➞ I ➞ L Storing Channels Manually ENG 7 If you know the number of the channel to be stored, see the following steps. ◆ Move the joystick up or down until the Channel is selected. ◆ Move the joystick right. ◆ Move the joystick up or down to select C (Air channel) or S (Cable channel). ◆ Move the joystick right. Manual Store Prog.No. Color System Sound System Search Channel Fine tune Move: P1 AUTO BG 409MHz C 16 Sel.: Store: ◆ Press the numeric buttons (0~9) to select indicate the required number. no sound or abnormal sound, re-select the sound standard ➣ Ifrequired. 8 If you do not know the channel numbers, select the Search by moving the joystick up or down. Move the joystick right to start the search. Result: 9 If reception is weak, you can fine tune a channel manually. Move the joystick up or down until the Fine tune is selected. Move the joystick left or right until the picture and sound are both clear and sharp. ➢ 10 The tuner scans the frequency range until the first channel or the channel that you selected is received on your screen. ◆ You can ignore any changes made and return to the previous setting by pressing the green button. ◆ If you are unable to fine tune a channel, check that the Color System and Sound System settings are correct. To assign a programme number to a channel, select the Prog. No. by moving the joystick up or down. Move the joystick left or right until you find the correct number. 11 To store the channel and associated programme number, press the joystick button ( ). 12 Repeat Steps 7 to 11 for each channel to be stored. ☛ Manual Store Prog.No. Color System Sound System Search Channel Fine tune P1 AUTO BG 409MHz C 16 Enter: Move: Store: Manual Store Prog.No. Color System Sound System Search Channel Fine tune P1 AUTO BG 409MHz C 16 Adjust: Move: Fine tune Fine tune Channel mode ◆ P (Programme mode): When completing tuning, the broadcasting stations in your area have been assigned to position numbers from P00 to max P99. You can select a channel by entering the position number in this mode. ◆ C (Real channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this mode. ◆ S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode. 17 Store: =0 Assigning Names to Channels ENG Channel Country ATM Manual Store Sort Name Channel Edit Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names. Austria Move: 1 Press the MENU button. The main menu is displayed. Result: 2 Move the joystick up or down until the Channel is selected. The options available in the Channel group are Result: displayed. 3 Move the joystick right. 4 Move the joystick up or down until the Name option is selected. Move the joystick right. The Name menu is displayed with the current channel Result: automatically is selected. 5 If necessary, select the channel to be assigned a new name by moving the joystick up or down. Move the joystick right. Arrow indications are displayed around the name box. Result: 6 Move the joystick up or down to select a letter (A~Z), a number (0~9) or a symbol (-, space). Move on the previous or next letter by moving the joystick left or right. 7 When you have finished entering the name, press the joystick button ( ) to confirm the name. Enter: Name 1 2 3 4 5 6 7 8 9 10 11 12 13 --------------------C 16 ----------------------------- Move: Enter: Exit:TV Name 1 2 3 4 5 6 7 8 9 10 11 12 13 --------------------C 16 ----------------------------- Move: Sel.: Store: Exit:TV 18 Activating the Child Lock and Skipping unwanted channels ENG ◆ Activating the child lock This feature allows you to lock the television so that it cannot be switched on via the front panel. It can, however, still be switched on via the remote control. Thus, by keeping the remote control away from unauthorised users, such as children, you can prevent them from watching unsuitable programme. ◆ Skipping unwanted channels You can exclude the channels of your choice from the channel scan operation. When you scan through the stored channels, those that you have chosen to skip are thus not displayed. All channels that you do not specifically choose to skip are displayed during scanning. 1 Press the MENU button. The main menu is displayed. Result: 2 Move the joystick up or down until the Channel is selected. The options available in the Channel group are Result: displayed. 3 Move the joystick right. 4 Move the joystick up or down until the Channel Edit option is selected. Move the joystick right. The Channel Edit menu is displayed with the current Result: channel automatically is selected. 5 Move the joystick up or down to select the number of the programme to which the channel is to be locked. 6 Move the joystick right. 7 To lock or unlock the channel, select On or Off by moving the joystick up or down. Press the joystick button ( ) to confirm. 8 Move the joystick right. 9 To erase or add the channel, select Erased or Added by moving the joystick up or down. Press the joystick button ( ) to confirm. Channel Country ATM Manual Store Sort Name Channel Edit Austria Move: Enter: Channel Edit 1 2 3 4 5 6 7 8 9 10 11 12 13 ----- Child Lock DSF Add ----Erase MTV KBS1 MBC Off Erased ----KBS2 Move: ZDF ARD Enter: SUPER Exit:TV VIVA2 3 SAT 1 2 3 4 5 6 7 8 9 10 11 12 13 ----- Child Lock DSF ----MTV KBS1 MBC Off Erased ----KBS2 Move: ZDF ARD Sel.: SUPER Store: VIVA2 Exit:TV 3 SAT 1 2 3 4 5 6 7 8 9 10 11 12 13 ----DSF ----MTV KBS1 MBC ----KBS2 ZDF ARD SUPER VIVA2 3 SAT Channel Edit Channel Edit Add Erase Off Erased Move: Sel.: Store: Exit:TV 19 Selecting a Channel by Information ENG You can display the list of stored channels. 1 Press the INFO. button. A list is displayed with the first 13 channels. Two text Result: boxes to the right of the list indicate: ◆ Whether the Teletext feature is available. ◆ Which sound mode is being used. 2 To scroll through the stored channels, move the joystick up or down. The corresponding channel is displayed. Result: 3 Press the TV button to select a specific channel. The corresponding channel is displayed and the Result: Information box disappears. Information 1 2 3 4 5 6 7 8 9 10 11 12 13 ----DSF ----MTV KBS1 MBC ----KBS2 ZDF ARD SUPER VIVA2 3 SAT TTX Stereo Sel.: ➢ ◆ External inputs can be displayed and scrolled through in the same way. ◆ You can display the name of the channel or input by pressing the DISPLAY button. 20 Changing the Picture Standard ENG You can use your remote control to select the type of picture which best corresponds to your viewing requirements. The following picture effects are available: ◆ Custom, Standard, Sports, Mild, Natural. To select the required picture effect, simply press the P.STD (Picture Standard) button on the remote control. Adjusting the Picture Settings Your television has several settings which allow you to control picture quality. Picture 1 Press the MENU button. The options available in the Picture group are Result: displayed. 2 Move the joystick right. The Adjust is selected. Result: 3 Move the joystick right again. The Adjust menu is displayed with the current option. Result: 4 Select the option to be adjusted by moving the joystick up or down. Move the joystick right. Result: The horizontal bar is displayed. Move the horizontal bar’s cursor left or right by moving the joystick left or right. Adjust Scan Mode Digital NR Tilt Size Blue Screen Move: Enter: Adjust(Standard) Color Tone Brightness Color Contrast Sharpness Move: 5 Standard Natural Scan Off 0 Auto wide Off Adjust: When you are satisfied with the settings, press the joystick button ( ) to store them. ➣ If you make any changes to these settings, the picture standard is automatically switched to Custom 21 Store: Extra Picture Settings ENG Picture Adjust Scan Mode Digital NR Tilt Size Blue Screen Standard Natural Scan Off 0 Auto wide Off Move: Enter: ◆ Scan Mode You will normally find that scan mode is best set to Natural Scan to reduce any slight picture flicker. However, it is possible that some occasional broadcasts (NTSC) may benefit by changing the scan mode. Natural Scan, Digital Scan and Progressive modes are available. ◆ Digital NR You can activate this feature to reduce any static and ghosting that may appear on the screen. ◆ Tilt Scan Mode If you find that the picture received is slightly tilted to one side, you can adjust the tilt setting. Natural Scan Sel.: Store: ◆ Size You can select the picture format which best corresponds to your viewing requirements. Digital NR On Sel.: ◆ Blue Screen If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the Blue Screen mode to Off. Store: Tilt Adjust: Store: 1 Press the MENU button. The options available in the Picture group are Result: displayed. 2 Move the joystick right. 3 Select the required option by moving the joystick up or down. 4 Move the joystick left or right to change the setting. Size Auto wide Sel.: Store: VGA Mode Size ◆ Scan Mode : Natural Scan, Digital Scan, Progressive ➢ Adjust Exit:TV Store: You can also select these options simply by pressing the SCAN-MODE button on the remote control. ◆ Digital NR : Off or On (activating) ◆ Tilt : -7 to +7 Picture Adjust Scan Mode Digital NR Tilt Size Blue Screen ◆ Size - Wide CRT: Auto wide, Panorama, 16:9, 4:3, Zoom1, Zoom2 - Normal (4:3) CRT: Normal, 16:9, Zoom Normal, 16:9 (In the DTV mode) - If the PC is connected, you can adjust the VGA mode by moving the joystick up, down, left, or right. Standard Natural Scan Off 0 Auto wide On Move: ➢ Enter: You can also select these options simply by pressing the P.SIZE button on the remote control. ◆ Blue Screen : Off or On (activating) 5 22 When you are satisfied with the settings, press the joystick button ( ) to store them. Using the LNA (Low Noise Amplifier) Feature (Option) ENG This function is very useful in the situation that the TV is used in weak signal. LNA amplifies the TV signal in the weak signal area, but not noise. Function This feature is working only weak signal condition, and that is memorized on current channel, additional. 1 2 Press the MENU button. The main menu is displayed. Result: Language Time Teletext Source Plug & Play AV Setup LNA English Main Move: Enter: Move the joystick up or down until the Function is selected. The options available in the Function group are Result: displayed. 3 Move the joystick right. 4 Move the joystick up or down until the LNA is selected. The LNA menu is displayed with the current channel Result: automatically is selected. 5 Select the required channel by moving the joystick up or down. Move the joystick right. 6 Select On or Off by moving the joystick up or down. Press the joystick button ( ) to confirm. LNA 1 2 3 4 5 6 7 8 9 10 11 12 13 ----DSF ----MTV KBS1 MBC ----KBS2 ZDF ARD SUPER VIVA2 3 SAT 1 2 3 4 5 6 7 8 9 10 11 12 13 ----DSF ----MTV KBS1 MBC ----KBS2 ZDF ARD SUPER VIVA2 3 SAT Off Move: Enter: Exit:TV LNA On Sel.: Store: Exit:TV Freezing the Current Picture You can freeze the picture when watching a television programme simply by pressing the “STILL” button. To return to normal viewing, press it again. ➣ If you press the STILL button when the PIP feature is activating, you can freeze the sub picture. Power 23 Changing the Sound Standard ENG You can use your remote control to select the type of special sound effect to be used when watching a given broadcast. The following sound effects are available: ◆ Custom, Standard, Music, Movie, Speech. To select the required sound effect, simply press the S.STD (Sound Standard) button on the remote control. Adjusting the Sound Settings Your television has several settings which allow you to control sound quality. Sound Adjust Headphone Dolby Digital Ext. Audio Audio Out Int. mute Move: Custom 1 Press the MENU button. The main menu is displayed. Result: Volume Off 2 Move the joystick up or down until the Sound is selected. The options available in the Sound group are displayed. Result: 3 Move the joystick right. The Adjust is selected. Result: 4 Move the joystick right again. The Adjust menu is displayed with the current option. Result: 5 Select the option to be adjusted by moving the joystick up or down. Move the joystick right. Enter: Adjust(Custom) Volume Bass Treble Move: Adjust: Store: Result: 6 When you are satisfied with the settings, press the joystick button ( ) to store them. ➣ 24 The horizontal bar is displayed. Move the horizontal bar’s cursor left or right by moving the joystick left or right. If you make any changes to these settings, the sound standard is automatically switched to Custom. Adjusting Your Headphone Preferences ENG You can adjust the headphone settings to suit your preferences. The following headphone settings are available: Sound ◆ Volume, Bass, Treble, Balance. 1 Press the MENU button. The main menu is displayed. Result: 2 Move the joystick up or down until the Sound is selected. The options available in the Sound group are displayed. Result: 3 Move the joystick right. 4 Move the joystick up or down until the Headphone is selected. Move the joystick right. The Headphone menu is displayed with the current Result: option. 5 Select the option to be adjusted by moving the joystick up or down. Move the joystick right. Result: 6 Adjust Headphone Dolby Digital Ext. Audio Audio Out Int. mute Custom Volume Off Move: Enter: Headphone Volume Bass Treble Balance Move: Adjust: The horizontal bar is displayed. Move the horizontal bar’s cursor left or right by moving the joystick left or right. When you are satisfied with the settings, press the joystick button ( ) to store them. ➣ When either COAXIAL IN or OPTICAL IN on the rear of the television is connected, you can not hear from the headphone. 25 Store: Setting the Dolby Digital ENG The Dolby Digital mode allows you enjoy Dolby Digital sound effect fully with the speakers are connected to the television. This allows various modes for the main, center, surround and woofer speakers to be selected. Rear of the TV Sound Adjust Headphone Dolby Digital Ext. Audio Audio Out Int. mute 1 Press the MENU button. Result: The main menu is displayed. 2 Move the joystick up or down until the Sound is selected. Result: The options available in the Sound group are displayed. 3 Move the joystick right. 4 Move the joystick up or down until the Dolby Digital is selected. Move the joystick right. Result: The Dolby Digital menu is displayed with the Pro Logic is selected. 5 Select the option (AUTO, On or Off) by moving the joystick left or right. Press the joystick button ( ) to confirm. Custom Volume Off Move: Enter: ➢ Dolby Digital Pro Logic Dynamic Range Speaker Setting Move: AUTO Off Sel.: Pro Logic Dynamic Range Speaker Setting Move: 6 If you wish to adjust the volume properly during night viewing, select the Dynamic Range by moving the joystick up or down. 7 Select On or Off by moving the joystick left or right. Press the joystick button ( ) to confirm. 8 Move the joystick up or down until the Speaker Setting is selected. Move the joystick right. The Speaker Setting menu is displayed with the Result: main left speaker is selected. 9 Select the speaker (Main Left, Center, Main Right, Surround Right, Surround Left, Woofer) to be adjusted by moving the joystick left or right. ◆ The Woofer option can control the External Woofer only when Audio Out is set to Volume. (For more details, refer to the page 28) ◆ The output of the built-in woofer is changed depending on the output of the main speakers. 10 Depending on the speaker, the following settings can be adjusted to suit your personal preferences. ◆ Test tone to simulate the volume ◆ Size ◆ Volume level ◆ delay time of surround channel 11 When you are satisfied with the settings, press the joystick button ( ) to store them. 12 When you have finished, press the TV button to return to normal viewing. Store: Dolby Digital AUTO On Sel.: Store: Dolby Digital Pro Logic Dynamic Range Speaker Setting AUTO Off Enter: Move: Speaker Setting Main Left Test Tone On Size Large Level 0dB Adjust: ➢ Store: 26 ◆ You can select these options simply by pressing the SURROUND button on the remote control. ◆ For further details of output depending on the each options, refer to page 27. Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories. Setting the Dolby Pro Logic ENG In case of “Pro Logic : AUTO” Output Input (Source) Main Left Center Main Right Sub Woofer Surround Right Left Line Speaker Mono ✔ ✔ ✔ PCM Stereo (L/R) ✔ ✔ ✔ Mono ✔ ✔ ✔ Lo/Ro ✔ ✔ ✔ Lt/Rt ✔ ✔ ✔ ✔ ✔ 5.1ch ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ Dolby Digital DTS ✔ MPEG I (Stereo only) ✔ MPEG II ✔ ✔ ✔ Main Left Center Main Right Right Left ✔ ✔ ✔ ✔ ✔ ✔ ✔ In case of “Pro Logic : On” Output Input (Source) Sub Woofer Surround Line Speaker ✔ Mono PCM Stereo (L/R) ✔ ✔ ✔ ✔ ✔ Mono Lo/Ro ✔ ✔ ✔ ✔ ✔ ✔ Lt/Rt ✔ ✔ ✔ ✔ ✔ ✔ 5.1ch ✔ ✔ ✔ ✔ ✔ ✔ ✔ DTS ✔ ✔ ✔ ✔ ✔ ✔ ✔ MPEG I (Stereo only) ✔ ✔ ✔ ✔ ✔ MPEG II ✔ ✔ ✔ ✔ ✔ Main Left Center Main Right Dolby Digital ✔ ✔ ✔ In case of “Pro Logic : Off” Output Input (Source) Sub Woofer Surround Right Left Line Speaker Mono ✔ ✔ ✔ PCM Stereo (L/R) ✔ ✔ ✔ Mono ✔ ✔ ✔ Lo/Ro ✔ ✔ ✔ Lt/Rt ✔ 5.1ch ✔ ✔ ✔ ✔ ✔ ✔ ✔ DTS ✔ ✔ ✔ ✔ ✔ ✔ ✔ MPEG I (Stereo only) ✔ MPEG II ✔ Dolby Digital ➢ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ The output of Sub Woofer is changed depending on the speaker setting. 27 Setting the External Digital Sound ENG This feature allows you enjoy Digital sound when the equipment with Digital output is connected to the television. Rear of the TV Coaxial Optical Analog Sound Adjust Headphone Dolby Digital Ext. Audio Audio Out Int. mute 1 Press the MENU button. The main menu is displayed. Result: 2 Move the joystick up or down until the Sound is selected. The options available in the Sound group are displayed. Result: 3 Move the joystick right. 4 Move the joystick up or down until the Ext. Audio is selected. Move the joystick right. The Ext. Audio menu is displayed. Result: 5 Select the required output (EXT1, EXT2, EXT3 or DVD) by moving the joystick up or down. 6 Select the option (Analog, Optical or Coaxial) by moving the joystick left or right. ◆ The Optical and Coaxial options are for digital signal inputs, such as the Dolby Digital (5.1ch), Dolby Prologic (4ch), DTS, or MPEG. ◆ The Analog option can not receive the signals above. Although the DVD is connected, you can hear only Stereo or Prologic type sounds. (For detailed input connections, see your DVD title.) 7 When you are satisfied with the settings, press the joystick button ( ) to confirm. 8 Press the MENU button. The options available in the Sound group are displayed Result: again. 9 Move the joystick up or down until the Audio Out is selected. Custom Volume Off Move: Enter: Ext. Audio EXT1 Audio Analog EXT2 Audio Analog EXT3 Audio Analog DVD Move: Analog Adjust: Store: ➢ Sound Adjust Headphone Dolby Digital Ext. Audio Audio Out Int. mute Move: Custom 10 Select the required option (Volume or Fixed) by moving the joystick left or right. ◆ If you want to adjust the volume level with the volume control on the TV or external amplifier, set to Volume. ◆ If you set to Fixed... - You can adjust the volume level with the volume control on the audio amplifier. And the Int. mute is set to On automatically, and you can not select it. - The volume control buttons (MUTE, +, -) of the television and remote control do not work. 11 Move the joystick up or down until the Int. mute is selected. If you set to On, no sound outputs of all internal and external speakers. Volume Off Sel.: Store: Sound Adjust Headphone Dolby Digital Ext. Audio Audio Out Int. mute Move: Custom ➢ Volume On Sel.: 28 Store: For information about connection of audio outputs, refer to “Connecting to the Audio Outputs” on page 43. 12 When the Audio Out is set to Volume, you can select the Int. mute and control it. When you have finished, press the TV button to return to normal viewing. Selecting the Sound Mode (depending on the model) ENG The “S.MODE” button displays/controls the processing and output of the audio signal. When power is switched on, the mode is automatically preset to either “Dual-I ” or “Stereo”, depending on the current transmission. NICAM Stereo A2 Stereo Type of broadcast On-screen indication Regular broadcast (Standard audio) MONO (Normal use) Regular + NICAM Mono NICAM MONO ↔ MONO NICAM Stereo NICAM STEREO ↔ MONO (Forced mono) NICAM Dual-I/II NICAM Dual-I → NICAM Dual-II → MONO Regular broadcast (Standard audio) MONO Bilingual or Dual-I/II DUAL-I ↔ DUAL-II Stereo ➣ STEREO ↔ MONO (Forced mono) ◆ If the receiving conditions deteriorate, listening will be easier if the mode is set to the MONO. ◆ If the stereo signal is weak and an automatic switching occurs, then switch to the MONO. ◆ When receiving a mono sound in the AV mode, connect to the “AUDIO-L” input connector on the panel (front or side, depending on the model). If the mono sound comes out only from left speaker, press the S.MODE button. 29 Setting the Sleep Timer ENG You can select a time period of between 15 and 180 minutes after which the television automatically switches to Standby mode. Sleep timer Off Sel.: Store: 30 1 Press the SLEEP button. The Sleep Timer menu is displayed. Result: ◆ If the sleep timer is not yet set, Off is displayed. If the sleep timer is already set, the remaining time before which the television switches to Standby mode is displayed. 2 Select the preset time intervals (15, 30, 45, 60, 75, 90, 105, 120, 135, 150, 165, 180) by moving the joystick left or right. 3 Press the joystick button ( ) to confirm your selection. Setting the Time and Switching the TV On/Off Automatically ENG You can set the television’s clock and set the On or Off timers so that the television will: Function ◆ Switch on automatically and tune to the channel of your choice at the time you select Language Time Teletext Source Plug & Play AV Setup LNA ◆ Switch off automatically at the time you select. 1 2 Press the MENU button. The main menu is displayed. Result: Move the joystick right. 4 Move the joystick up or down until the Time is selected. Move the joystick right. The Time menu is displayed with the Clock option Result: selected. 5 Set the clock by pressing the numeric buttons. 6 Move the joystick up or down until the Timer is selected. ➣ If you have not set the clock, you can not select the Timer. 7 Set to On by moving the joystick left or right for switching on automatically. 8 Move the joystick up or down until the On Time is selected. 9 Set the time to switch on automatically by pressing the numeric buttons. 10 In the same way, set the Off Time to switch off automatically ➢ Main Move: Enter: Move the joystick up or down until the Function is selected. The options available in the Function group are Result: displayed. 3 English Time Clock Timer On Time Off Time Move: -- : -Off -- : --- : -Adjust:0~9 Store: Time Clock Timer On Time Off Time Move: 11 : 35 On -- : --- : -Adjust: Store: Time Clock Timer On Time Off Time Move: 11 : 36 On 06 : 30 -- : -Adjust:0~9 When pressing the “ ” button (On/Off) on the panel of the television, the clock setting will be reset. Store: Time Clock Timer On Time Off Time Move: 11 : 37 On 06 : 30 23 : 00 Adjust:0~9 31 Store: Viewing Pictures From External Sources ENG Once you have connected up your various audio and video systems, you can view different sources by selecting the appropriate input. 1 Check that all the necessary connections have been made. 2 Switch your television on, then press the VIDEO button repeatedly. The input sources are displayed in the following order: ➞ Ext1 Video ➞ Ext2 Video ➞ Ext3 Video (VGA) (DVD) (Ext4 Video or S-VHS) ➞ ➞ ➞ ◆ VGA : When the PC is connected, it is selected. Ext4 Video : When the side inputs of your television is connected, it is selected. ➣ ◆ Depending on the source selected, the pictures may appear automatically. ◆ To watch television programme again, press the TV button and select the number of the channel required. 32 Redirecting an Input to the External Output ENG Your television enables you to choose which audio/video signals are output to the external connector. Function 1 2 Press the MENU button. The main menu is displayed. Result: Move the joystick up or down until the Function is selected. The options available in the Function group are Result: displayed. 3 Move the joystick right. 4 Move the joystick up or down until the AV Setup option is selected. Move the joystick right. Result: 5 The AV Setup menu is displayed. Select the required output (EXT2 or EXT3) by moving the joystick up or down. Move the joystick right. 6 Select the source to be directed to the output by moving the joystick left or right. 7 Press the joystick button ( 8 Press the TV button to return to normal viewing. Language Time Teletext Source Plug & Play AV Setup LNA English Main Move: Enter: AV Setup EXT1 TV EXT2 Selectable out EXT3 Decorder out Enter: Move: EXT2 out ) to confirm the change. TV EXT1 EXT2 EXT3 EXT4 TV to EXT2 Sel.: Store: 33 Viewing the Picture In Picture (PIP) (continued) ENG PIP PIP TV/Video Swap Size Prog.No. On TV Large P01 Move: Sel.: PIP PIP TV/Video Swap Size Prog.No. On TV Large P01 Move: You can display a sub picture within the main picture of TV program or external A/V devices. In this way you can watch TV program or monitor the video input from any connected devices while watching TV or other video input. 1 Press the MENU button. The main menu is displayed. Result: 2 Move the joystick up or down until the PIP is selected. The options available in the PIP group are displayed. Result: 3 Move the joystick right. 4 To activate the PIP feature, set the PIP to on by moving the joystick left or right. 5 Move the joystick up or down until the TV/Video is selected. Select a source of the sub picture by moving the joystick left or right. The sources are displayed in the following order: Sel.: TV - Ext1 Video - Ext2 Video - Ext3 Video - Ext4 Video 6 To interchange the main picture and the sub picture, select the Swap by moving the joystick up or down. Move the joystick right. 7 Move the joystick up or down until the Size is selected. Select a size of the sub to Large or Small by moving the joystick left or right. 8 Move the joystick up or down until the Prog.No. is selected. You can select the channel that you want to view through sub picture by moving the joystick left or right. 9 Press the TV ( PIP PIP TV/Video Swap Size Prog.No. On TV Large P01 Move: Enter: PIP PIP TV/Video Swap Size Prog.No. On TV Large P01 Move: Sel.: PIP PIP TV/Video Swap Size Prog.No. On TV Large P01 Move: Sel.: 34 ) button to return to normal viewing. Viewing the Picture In Picture (PIP) ENG Easy functions of remote control. Buttons Feature PIP ON Used to activate or deactivate the PIP function directly. SWAP Used to interchange the main picture and the sub picture. the main picture is in the Video mode and the ➣ When sub picture is in the TV mode, you might not hear the sound of main picture when pressing the SWAP button after changing the sub picture channel. At this time, reselect the channel of main picture. LOCATE Used to move the sub picture counterclockwise. P▲/▼ Used to select the channel of sub picture. SIZE Used to select a size of sub picture (Large or Small). STILL Used to freeze the sub picture. Power press the STILL button during on the MULTI ➣ IfPIPyoumode, serial scenes of the last sub picture will be captured. SCAN Used to scan every memorized channel in order. To stop scanning, press it again. MULTI Used to view up to 12 memorized channels on the sub picture spontaneously. TV/VIDEO Used to assign a source of sub picture (TV, EXT1, EXT2, EXT3 or EXT4). 35 Teletext Feature (depending on the model) ENG Most television channels provide written information services via teletext. Information provided includes: ◆ Television programme times ◆ News bulletins and weather forecasts ◆ Sports results ◆ Travel information This information is divided into numbered pages (see diagram). Part Contents A Selected page number. B Broadcasting channel identity. C Current page number or search indications. D Date and time. E Text. F Status information. FASTEXT information. ➣ Teletext information is often divided between several pages displayed in sequence, which can be accessed by: ◆ Entering the page number ◆ Selecting a title in a list ◆ Selecting a colored heading (FASTEXT system) 36 Displaying the Teletext Information ENG You can display Teletext information at any time on your television. Teletext information to be displayed correctly, ☛ For channel reception must be stable; otherwise: ◆ Information may be missing ◆ Some pages may not be displayed 1 Select the channel providing the Teletext service by pressing the P or P button. 2 Press the TEXT/MIX button to activate the teletext mode. The contents page is displayed. It can be redisplayed Result: at any time by pressing the (index) button. 3 Press the TEXT/MIX button again. The screen will be split into two. This Double Teletext Result: feature lets you view the actual broadcast and teletext information separately on the screen. 4 If you wish to display the actual broadcast and teletext information on a single screen, press the TEXT/MIX button again. 5 Press the TV ( ) button again to exit from the teletext display. Selecting Display Options When you have displayed a Teletext page, you can select various options to suit your requirements. To display... Press the... ◆ Hidden text (answers to quiz games, for example) ◆ The normal screen (reveal) ◆ A secondary page, by entering its number (sub-page) ◆ The broadcast when searching for a page (cancel) ◆ The next page (page up) ◆ The previous page (page down) ◆ Double-size letters in the: • Upper half of the screen • Lower half of the screen ◆ Normal screen ➣ (reveal) again (size) • Once • Twice • Three times To return to the normal display after using the reveal or size feature, press the TV ( ) button again. 37 Selecting the Teletext Source (Option) ENG When you watching the current channel you can display the Teletext information of other channel. Function Language Time Teletext Source Plug & Play AV Setup LNA Move: Sel.: English Move: Sel.: 38 The main menu is displayed. 2 Move the joystick up or down until the Function is selected. The options available in the Function group are Result: displayed. 3 Move the joystick right. 4 Move the joystick up or down until the Teletext Source is selected. 5 Select the required option (Main or Sub) by moving the joystick left or right. Store: English Sub Press the MENU button. Result: Main Function Language Time Teletext Source Plug & Play AV Setup LNA 1 ◆ If you set to Main, you can display the teletext information of current channel. Store: ◆ If you set to Sub, you can display the teletext information of other channel. - If the PIP feature is activating, you can display the teletext information of sub channel. If change the channel of sub picture, you can display the teletext information of the changed sub channel. - If the Double Teletext feature is activating, you can display the teletext information of other channel at the same time as the current channel. Selecting a Teletext Page ENG You can enter the page number directly by pressing the numeric buttons on the remote control. 1 Enter the three-digit page number given in the content by pressing the corresponding numeric buttons. Result: The current page counter is incremented and the page is then displayed. If the selected page is linked with several secondary pages, the secondary pages are displayed in sequence. 2 If the FASTEXT system is used by the broadcasting company, the different topics covered on a Teletext page are colour-coded and can be selected by pressing the colored buttons on the remote control. Press the colored button corresponding to the topic that you wish to select; the available topics are given on the status line. Result: The page is displayed with other colored information that can be selected in the same way. 3 To display the previous or next page, press the corresponding colored button. 4 To display the subpage, see the following steps. ◆ Press the (sub-page) button. Result: The available subpages appear. ◆ Select the required sub-page. Sub-pages can be scrolled by pressing the or button. 5 When you have finished, press the TV ( your normal broadcast. ) button to return to 39 TeleWeb Feature (depending on the model) ENG Function Language Time Teleweb Plug & Play AV Setup LNA Move: English Sel.: Store: Teleweb Setting Teleweb On Provider Search Provider Select Download Move: TeleWeb is the new television broadcasting standard for Teletext services. TeleWeb is similar to Teletext, just easy to use. TeleWeb can transmit the News, TV programme information, and advertising in excellent picture quality and directly access via the remote control. 1 Press the MENU button. The main menu is displayed. Result: 2 Move the joystick up or down until the Function is selected. The options available in the Function group are Result: displayed. 3 Move the joystick right. 4 Move the joystick up or down until the Teleweb is selected. Move the joystick right. The Teleweb menu is displayed. Result: 5 To activate the Teleweb feature, set the Teleweb to On by moving the joystick left or right. ◆ If you set to On, 400 teletext pages can be stored. ◆ If you set to Off, 2100 teletext pages can be stored. 6 Move the joystick up or down until the Provider Search is selected. Start the provider search by moving the joystick left or right. It will be search only the channels stored. If find a Result: provider, the Added is displayed and continue the search. -- ----- ---------Off Store: Sel.: Teleweb Setting Teleweb On Provider Search Provider Select Download -- ----- ---------Off Sel.: Move: Store: ➢ Provider Search 7 2% P1 ----- Added Teleweb Setting Teleweb On Provider Search Provider Select P3 KABEL Service 15 Download Off Move: Sel.: Store: When the search has been finished, move the joystick up or down until the Provider Select is selected. Find the required provider by moving the joystick left or right. ➢ Exit:TV To stop the search before it has finished, press the TV button. Select a provider and then the teleweb downloading will start. 8 Press the TeleWeb button to enter the teleweb mode. 9 If you want to download the Teleweb information before switch the television off, select the Download by moving the joystick up or down. Move the joystick left or right to set to On. Even though you turn off the TV on the channel no Result: provider is selected, the channel will be automatically switched to the selected channel and TeleWeb downloading will start. During downloading, the picture will not be shown and only status bar will be displayed on the screen. (It takes 30 minutes to one hour depending on the program.) Teleweb Setting Teleweb ➣ On Provider Search Provider Select P3 KABEL Service 15 Download On Move: Sel.: 40 Store: ◆ When pressing the “ ” button (On/Off) on the panel of the television, the existing downloaded information will disappear. ◆ If you enter the TeleWeb mode on the channel where no provider is selected, you can view only the information downloaded up to now. Using the TeleWeb Menu after Displaying the TeleWeb ENG Bookmarking the current page. 1 2 On the page you wish to add to the bookmark list press the MENU button. The TeleWeb menu is displayed. Result: TeleWeb Bookmark List Add Bookmark Home Page Move the joystick up or down until the Add Bookmark is selected. Press the joystick button ( ). The current page is added to the bookmark list. Result: ➢ You can register up to six pages. If you add another URL when six bookmarks have been listed, the first URL will be deleted and the new URL will be listed as the sixth. Current program Selected provider Service is loading Move: Store: Entering the bookmarked URL. 1 2 TeleWeb Bookmark List Press the MENU button. The TeleWeb menu is displayed with the Bookmark Result: List is selected. Add Bookmark Home Page Current program Move the joystick right. The stored URLs are listed. Result: 3 To erase a URL, select a required URL and press the TeleWeb (red) button. The selected URL is erased and the listed URLs Result: moves up one by one. 4 Select the URL you wish to enter by moving the joystick up or down and press the joystick button ( ). The current page moves to the selected URL and the Result: menu is disappeared. Enter: Selected provider Service is loading Move: Store: Enter: Bookmark List SAMSUNG ELECTRONICS TARA SYSTEMS KIA MOTORS MICRONAS OLYMPIC NEWS ECONOMICS Bookmarking the current page. 1 Press the MENU button. The TeleWeb menu is displayed. Result: 2 Move the joystick up or down until the Home Page is selected. Press the joystick button ( ). It moves to a home page. Result: Move: Erase: Easy accessing the TeleWeb service via the remote control. Button TeleWeb HOME Function Activate or deactivate the TeleWeb feature directly. Move the home page of the TeleWeb. Display the forward page of the TeleWeb. Display the backward page of the TeleWeb. Select a option. Confirm your choice. 41 Enter: Connecting to the External Input/Output ENG “EXT 1” is used for the equipment with an RGB output, such as video game devices or video disc players. VCR ① ② DVD Rear of the TV or Decoder / Video game device or Video disc player ① This end can be fitted with: ◆ A SCART connector ◆ An S-Video connector and two audio RCA connectors (L+R) ◆ Three RCA connectors (VIDEO + AUDIO-L/R) ② If you have a second VCR and wish to copy cassettes tape, connect the Satellite receiver ③ source VCR to “EXT 1” and the target VCR to “EXT 2” so that you can redirect the signal from “EXT 1” to “EXT 2”. ③ When you wish to record a programme, connect the receiver to “EXT 1” and the VCR to “EXT 2” so that you can redirect the signal from “EXT 2” to “EXT 2”. Connecting to the DVD Input The RCA connectors are used for equipment with a DVD output. (480i) Rear of the TV DVD 42 Connecting to the Audio Outputs ENG The AUDIO OUT connectors are used for equipment, such as an audio system or external amplifier (to take full advantage of the Surround sound effect). Rear of the TV Audio System/ External Amplifier Connecting to the Digital Audio Inputs The COAXIAL and OPTICAL connectors are used for equipment with a digital output (to take digital sound). Rear of the TV DVD Connecting Headphones You can connect a set of headphones to your television if you wish to watch a television programme without disturbing the other people in the room. ➢ Side of the TV Prolonged use of headphones at a high volume may damage your hearing. 43 Connecting to the Audio/Video Input ENG The RCA (AUDIO-L/R + VIDEO) connectors are used for equipment such as camcorders, video disc players and some video game devices. Camcorder Side of the TV Video disc player Video game device Connecting to the S-Video Input The S-VIDEO and RCA (AUDIO-L/R) connectors are used for equipment with an S-Video output, such as a camcorder or VCR. Side of the TV ① and ① To play pictures and sound, both the S-VIDEO and RCA connectors must be used. 44 Camcorder VCR Connecting to the PC Input ENG The PC INPUT and RCA(AUDIO-L/R) connectors are used for interfacing with your PC. Side of the TV Personal Computer and Setting up Your PC Software (Windows only) The Windows display-settings for a typical computer are shown below. But the actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. But even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) First, click on Settings on the Windows start menu. While Settings is highlighted, move the cursor so that Control Panel is highlighted. When the control panel screen appears, click on Display and a display dialog-box will appear. Navigate to the Settings tab on the display dialog-box. The correct setting of size (resolution) is 640 x 480 pixels. If a vertical-frequency option exists on your display settings dialog box, the correct value is 60 or 60 Hz. Otherwise, just click OK and exit the dialog box. 45 SCART Connector Wiring (EXT1, EXT2 or EXT3) ENG If you wish to connect other equipment via the SCART connectors on your television, contact your dealer or a qualified technician to wire the A/V cable as illustrated below. Pin Signal 1 2 3 4 5 6 7 8 9 10 11 Audio output R Audio input R Audio output L Audio chassis return Video chassis return (RGB blue) Audio input L RGB blue input Switching voltage Video chassis return (RGB green) AV-Link (Ext 1) RGB green input ➢ Pin 12 13 14 15 16 17 18 19 20 21 Signal Video chassis return (RGB red) RGB red input Blanking signal (RGB switching) Video chassis return Blanking signal ground Video output Video input Screening/chassis return Pins 5, 7, 9, 11, 13, 15 and 16 are used for RGB processing and are only wired on the EXT1 or EXT3 connector. Wiring the Mains Power Supply Plug (UK Only) IMPORTANT NOTICE The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating must be used. Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, it must be of the same colour as the pin face of the plug. Replacement covers are available from your dealer. If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you should obtain a suitable safety approved extension lead or consult your dealer for assistance. However, if there is no alternative to cut off the plug, remove the fuse and then safely dispose of the plug. Do NOT connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord. IMPORTANT The wires in the mains lead are colored in accordance with the following code: BLUE - NEUTRAL BROWN - LIVE As these colours may not correspond to the colored markings identifying the terminals in your plug, proceed as follows: The wire colored BLUE must be connected to the terminal marked with the letter N or colored BLUE or BLACK. The wire colored BROWN must be connected to the terminal marked with the letter L or colored BROWN or RED. WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH IS MARKED WITH THE LETTER E OR BY THE EARTH SYMBOL , OR COLORED GREEN OR GREEN AND YELLOW. 46 Troubleshooting: Before Contacting Service Personnel ENG Before contacting Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and serial number of the television and contact your local dealer. No sound or picture ◆ Check that the mains lead has been connected to a wall socket. ◆ Check that you have pressed the “ ” button (On/Off) and the POWER ( ) button. ◆ Check the picture contrast and brightness settings. ◆ Check the volume. Normal picture but no sound ◆ Check the volume. ◆ Check whether the volume MUTE button on the remote control has been pressed. No picture or black and white picture ◆ Adjust the colour settings. ◆ Check that the broadcast system selected is correct. Sound and picture interference ◆ Try to identify the electrical appliance that is affecting the television, then move it further away. ◆ Plug your television into a different mains socket. Blurred or snowy picture, distorted sound ◆ Check the direction, location and connections of your aerial. This interference often occurs due to the use of an indoor aerial. Remote control malfunctions ◆ Replace the remote control batteries. ◆ Clean the upper edge of the remote control (transmission window). ◆ Check the battery terminals. 47 - AFTER SALES SERVICE - Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present. ELECTRONICS AA68-02562A-00 (ENG)
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project