Samsung | AR07JSFPEWQN | Samsung AR09JSFPEWQN User Manual

Air conditioner
User & Installation manual
ARJS Series
•• Thank you for purchasing this Samsung air conditioner.
•• Before operating this unit, please read this user & installation manual carefully and
retain it for future reference.
Maldives ET IB&IM_DB68-06219A-00_EN.indd 1
2016/5/16 10:26:35
Features of your new air conditioner
Cool Summer Offer
On those hot sweltering summer days and long restless nights, there is no better escape from the heat
than the cool comforts of home. Your new air conditioner brings an end to exhausting hot summer
days and lets you rest. Beat the heat with your own air conditioner this summer.
Cost Efficient System
Your new air conditioner not only provides maximum cooling power in the summer, but also can be an
efficient heating method in the winter with the advanced “Heat pump” system. “Heat pump” system is
3 times more efficient compare to the other electrical heating appliance, so you can further reduce its
running cost. Now, meet year-round needs with one air conditioner.
Look for Everywhere
The elegant and harmonious design gives priority to the esthetics of your space and complements
any of your existing interior décor. With its soft color and rounded-edge shape, the new air conditioner
adds class to any room. Enjoy what your air conditioner offers both functionally and esthetically.
function
function allows you to set a comfortable sleep temperature while saving energy and
having sound sleep.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be
disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how
they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories
should not be mixed with other commercial wastes for disposal.
For information on Samsung’s environmental commitments and product specific regulatory obligations e.g. REACH visit: samsung.
com/uk/aboutsamsung/samsungelectronics/corporatecitizenship/data_corner.html
English-2
Maldives ET IB&IM_DB68-06219A-00_EN.indd 2
2016/5/16 10:26:35
Contents
Preparation
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Checking before use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Basic function
Checking the name of the parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Checking the remote controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Basic function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Adjusting the air flow direction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Advanced function
Using the Smart Saver function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Using the Turbo function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Using the Quiet function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Using the Auto Clean function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Setting the On/Off timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Others
Cleaning the air conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Maintaining the air conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Installation
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Choosing the installation location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Fixing the installation plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Connecting the assembly cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Installing and connecting the assembly pipe of the indoor unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Evacuating the indoor unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Cutting or extending the pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Installing and connecting the drain hose of the indoor unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Changing direction of the drain hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Installing and connecting the drain hose of the outdoor unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Evacuating the connected pipes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Performing the gas leak tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Fixing the indoor unit in place . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Fixing the outdoor unit in place . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Final check and trial operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Pump down procedure (when removing the product) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
How to connect your extended power cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Sub PCB installation(optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
English-3
Maldives ET IB&IM_DB68-06219A-00_EN.indd 3
2016/5/16 10:26:35
Safety precautions
Before using your new air conditioner, please read this manual thoroughly to ensure
that you know how to safely and efficiently operate the extensive features and
functions of your new appliance.
Because the following operating instructions cover various models, the
characteristics of your air conditioner may differ slightly from those described in this
manual. If you have any questions, call your nearest contact center or find help and
information online at www.samsung.com.
Important safety symbols and precautions:
WARNING
CAUTION
Hazards or unsafe practices that may result in severe
personal injury or death.
Hazards or unsafe practices that may result in minor
personal injury or property damage.
Follow directions.
Cut-off the power supply.
Do NOT attempt.
Do NOT disassemble.
Make sure the machine is grounded to prevent electric shock.
FOR INSTALLATION
WARNING
Use the power line with the power specifications of the product or higher
and use the power line for this appliance only. In addition, do not use an
extension line.
 Extending the power line may result in electric shock or fire.
 Do not use an electric transformer. It may result in electric shock or fire.
 If the voltage/frequency/rated current condition is different, it may cause fire.
The installation of this appliance must be performed by a qualified
technician or service company.
 Failing to do so may result in electric shock, fire, explosion, problems with the
product, or injury and may also void warranty on the installed product.
Install a Isolation Switch next to the Air Conditioner (but not on the panels
of the Air Conditioner)and circuit breaker dedicated to the air conditioner.
 Failing to do so may result in electric shock or fire.
Fix the outdoor unit firmly so that the electric part of the outdoor unit is not
exposed.
 Failing to do so may result in electric shock, fire, explosion, problems with the
product.
English-4
Maldives ET IB&IM_DB68-06219A-00_EN.indd 4
2016/5/16 10:26:35
FOR INSTALLATION
01 Preparation
Do not install this appliance near a heater, inflammable material. Do
not install this appliance in a humid, oily or dusty location, in a location
exposed to direct sunlight and water (rain drops). Do not install this
appliance in a location where gas may leak.
 This may result in electric shock or fire.
Never install the outdoor unit in a location such as on a high external wall
where it could fall.
 If the outdoor unit falls, it may result in injury, death or property damage.
This appliance must be properly grounded. Do not ground the appliance to a
gas pipe, plastic water pipe, or telephone line.
 Failure to do so may result in electric shock, fire, and explosion.
 Make sure to use a socket-outlet with ground.
CAUTION
Install your appliance on a level and hard floor that can support its weight.
 Failing to do so may result in abnormal vibrations, noise, or problems with the
product.
Install the draining hose properly so that water is drained correctly.
 Failing to do so may result in water overflowing and property damage. Avoid
adding drain to waste pipes as odours may arise in the future.
When installing the outdoor unit, make sure to connect the draining hose
so that draining is performed correctly.
 The water generated during the heating operation by the outdoor unit may
overflow and result in property damage.
In particular, in winter, if a block of ice falls, it may result in injury, death or
property damage.
FOR POWER SUPPLY
WARNING
When the circuit breaker is damaged, contact your nearest service center.
Do not pull or excessively bend the power line. Do not twist or tie the
power line. Do not hook the power line over a metal object, place a heavy
object on the power line, insert the power line between objects, or push
the power line into the space behind the appliance.
 This may result in electric shock or fire.
English-5
Maldives ET IB&IM_DB68-06219A-00_EN.indd 5
2016/5/16 10:26:35
Safety precautions
FOR POWER SUPPLY
CAUTION
When not using the air conditioner for a long period of time or during a
thunder/lightning storm, cut the power at the circuit breaker.
 Failing to do so may result in electric shock or fire.
FOR USING
WARNING
If the appliance is flooded, please contact your nearest service center.
 Failing to do so may result in electric shock or fire.
If the appliance generates a strange noise, a burning smell or smoke, cutoff the power supply immediately and contact the nearest service center.
 Failing to do so may result in electric shock or fire.
In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate
immediately without touching the power line. Do not touch the appliance
or power line.
 Do not use a ventilating fan.
 A spark may result in an explosion or fire.
To reinstall the air conditioner, please contact your nearest service center.
 Failing to do so may result in problems with the product, water leakage,
electric shock, or fire.
 A delivery service for the product is not provided. If you reinstall the product in
another location, additional construction expenses and an installation fee will
be charged.
 Especially, when you wish to install the product in an unusual location such as
in an industrial area or near the seaside where it is exposed to the salt in the air,
please contact your nearest service center.
Do not touch the circuit breaker with wet hands.
 This may result in electric shock.
Do not turn the air conditioner off with the circuit breaker while it is
operating.
 Turning the air conditioner off and then on again with the circuit breaker may
cause a spark and result in electric shock or fire.
After unpacking the air conditioner, keep all packaging materials well
out of the reach of children, as packaging materials can be dangerous to
children.
 If a child places a bag over its head, it may result in suffocation.
English-6
Maldives ET IB&IM_DB68-06219A-00_EN.indd 6
2016/5/16 10:26:35
01 Preparation
Do not touch the air flow blade with your hands or fingers during the
heating operation.
 This may result in electric shock or burns.
Do not insert your fingers or foreign substances into the air inlet/outlet of
the air conditioner.
 Take special care that children do not injure themselves by inserting their
fingers into the product.
Do not strike or pull the air conditioner with excessive force.
 This may result in fire, injury, or problems with the product.
Do not place an object near the outdoor unit that allows children to climb
onto the machine.
 This may result in children seriously injuring themselves.
Do not use this air conditioner for long periods of time in badly ventilated
locations or near infirm people.
 Since this may be dangerous due to a lack of oxygen, Open a window at least
once an hour.
If any foreign substance such as water has entered the appliance, cut-off
the power supply and contact the nearest service center.
 Failing to do so may result in electric shock or fire.
Do not attempt to repair, disassemble, or modify the appliance yourself.
 Do not use any fuse (such as cooper, steel wire, etc.)other than the standard
fuse.
 Failing to do so may result in electric shock, fire, problems with the product, or
injury.
English-7
Maldives ET IB&IM_DB68-06219A-00_EN.indd 7
2016/5/16 10:26:35
Safety precautions
FOR USING
CAUTION
Do not place objects or devices under the indoor unit.
 Water dripping from the indoor unit may result in fire or property damage.
(example electrical appliances)
Check that the installation frame of the outdoor unit is not broken at least
once a year.
 Failing to do so may result in injury, death or property damage.
Max current is measured according to IEC standard for safety and current is
measured according to ISO standard for energy efficiency.
Do not stand on top of the appliance or place objects (such as laundry,
lighted candles, lighted cigarettes, dishes, chemicals, metal objects, etc.) on
the appliance.
 This may result in electric shock, fire, problems with the product, or injury.
Do not operate the appliance with wet hands.
 This may result in electric shock.
Do not spray volatile material such as insecticide onto the surface of the
appliance.
 As well as being harmful to humans, it may also result in electric shock, fire or
problems with the product.
Do not drink the water from the air conditioner.
 The water may be harmful to humans.
Do not apply a strong impact to the remote controller and do not
disassemble the remote controller.
Do not touch the pipes connected with the product.
 This may result in burns or injury.
Do not use this air conditioner to preserve precision equipment, food,
animals, plants or cosmetics, or for any other unusual purposes.
 This may result in property damage.
Avoid directly exposing humans, animals or plants from the air flow from
the air conditioner for long periods of time.
 This may result in harm to humans, animals or plants.
English-8
Maldives ET IB&IM_DB68-06219A-00_EN.indd 8
2016/5/16 10:26:35
FOR CLEANING
01 Preparation
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
appliance.
For use in Europe : This appliance can be used by children aged from 8
years and above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe way
and understand the hazards involved. Children shall not play with the
appliance. Cleaning and user maintenance shall not be made by children
without supervision.
WARNING
Do not clean the appliance by spraying water directly onto it. Do not use
benzene, thinner or alcohol to clean the appliance.
 This may result in discoloration, deformation, damage, electric shock or fire.
Before cleaning or performing maintenance, cut-off the power supply and
wait until the fan stops.
 Failing to do so may result in electric shock or fire.
FOR CLEANING
CAUTION
Take care when cleaning the surface of the heat exchanger of the outdoor
unit since it has sharp edges.
 This should be done by a qualified technician please contact your installer or
service center.
Do not clean the inside of the air conditioner by yourself.
 For cleaning inside the appliance, contact your nearest service center.
 When cleaning the internal filter, refer to the descriptions in the ‘Cleaning the
air conditioner’ section.
 Failure to do may result in damage, electric shock or fire.
CAUTION
•Please cover the air conditioner with PE BAG after installation,and
remove it when you start to run air conditioner.
English-9
Maldives ET IB&IM_DB68-06219A-00_EN.indd 9
2016/5/16 10:26:35
Checking before use
Operation ranges
The table below indicates the temperature and humidity ranges the air
conditioner can be operated within. Refer to the table for efficient use.
Mode
Indoor
temperature
Outdoor
temperature
Indoor humidity
Cooling
16 ˚C~32 ˚C
-10 ˚C~46 ˚C
Relative humidity 80% or less
Heating
27 ˚C or less
-15 ˚C~24 ˚C
-
Dry
18 ˚C~32 ˚C
-10 ˚C~46 ˚C
-
ffIf the air conditioner operates in cooling mode for long period of time in high humidity area, dew may be formed.
ffIf the outdoor temperature goes down to -5 °C, heating capacity may decrease as much as 60 %~70 % of specified
capacity according to the using conditions .
Model : AJ
Indoor
Outdoor
temperature temperature
Mode
Indoor
humidity
Remark
Cooling
16˚C~32˚C
-5˚C~46˚C
80% or less
Heating
27˚C or less
-15˚C~24˚C
-
-
Dry
18˚C~32˚C
-5˚C~46˚C
-
AJ100*** outdoor temperature : -10˚C~46˚C.
AJ100*** outdoor temperature : -10˚C~46˚C.
 The standardized temperature for heating is 7˚C. If the outdoor temperature drops to 0˚C or below, the heating
capacity can be reduced depending on the temperature condition.
 If the cooling operation is used at over 32˚C(indoor temperature), it does not cool at its full capacity.
Maintaining your air conditioner
Internal protections via the unit control system
ffThis internal protection operates if an internal fault occurs in the air conditioner.
Type
Against cold air
Defrost cycle
Protect compressor
Description
The internal fan will be off to prevent cold air when the heat pump is heating.
The internal fan will be off to defrost ice when the heat pump is heating.
Vertical air flow blade will be closed during defrost cycle and it will open again during
heating operation after defrost cycle.
The air conditioner does not start operating immediately to help protect the compressor
of the outdoor unit after it has been started.
• If the heat pump is operating in Heat mode, defrost cycle is actuated to help remove frost from an outdoor
unit that may have deposited at low temperatures.
The internal fan is switched off automatically and restarted only after the defrost cycle is completed.
English-10
Maldives ET IB&IM_DB68-06219A-00_EN.indd 10
2016/5/16 10:26:36
Checking the name of the parts
Your air conditioner may slightly look different from illustration shown below depending on your model.
Main parts
02 BASIC FunCtIOn
Room
temperature
sensor
Air intake
Air filter(under the panel)
Air flow blade
(up and down)
Blade pin lever
Air flow blade (left and right)
Display
indicator
Timer/Auto clean indicator
Operation indicator
Power
button
Remote controller receiver
English-11
Maldives ET IB&IM_DB68-06219A-00_EN.indd 11
2016/5/16 10:26:37
Checking the remote controller
• Point the remote controller towards the remote controller receiver of the indoor unit.
• When you properly press the button on the remote controller, you will hear beep sound from the indoor unit and a transmit
indicator( ) appears on the remote controller display.
Remote controller buttons
Remote controller display
Power
Turn on/off the air conditioner.
Smart Saver
Mode
Less energy usage makes your space
cool between the temperature range
of 24°C~30°C.
Set one of the 5 operating modes
(see pages 14-15 for instructions).
Auto Clean
Turbo
Auto clean function – Dry inside of the indoor
unit to get rid of odor.
Operate in auto fan speed to
cool quickly.
Air swing
Quiet
Activate/Deactivate air flow blade movement
automatically up and down.
Reduce noise generated from an indoor
unit during operation.
Fan
Set the
Adjust how much air flows through the air
conditioner with the 4 different fan speeds
such as Auto/Low/Medium/High.
mode on.
Set
On Timer
Set the timer/
Set the On Timer on.
Off Timer
Cancel
Set the Off Timer on.
Cancel the timer/
Time Up/Time Down
Adjust the time for timer/


Temp + -
Increase/Decrease the temperature by 1˚C.
mode.
mode.
mode.
This button doesn't have any function.
• Make sure that the water does not get to the remote controller.
English-12
Maldives ET IB&IM_DB68-06219A-00_EN.indd 12
2016/5/16 10:26:37
Remote controller display
Turbo indicator
Quiet indicator
Smart Saver indicator
02 BASIC FunCtIOn
Operation mode
indicator
Low battery indicator
Transmit indicator
Air swing indicator
Fan speed indicator
Auto (Turbo)
Low
Medium
High
On Timer indicator
Off Timer indicator
indicator
Battery changing time
When the battery is exhausted, ( ) will be displayed in the remote controller display. When the icon appears, change the
batteries. The remote controller requires two 1.5V AAA type batteries.
Storing the remote controller
When you do not use the remote controller for long time, remove the batteries from the remote controller and store it.
Inserting the batteries
1. Push the lever as arrow
2. Insert two AAA batteries.
indicates on the rear side of the
Check and match the “+” and “-”
remote controller and pull up.
signs accordingly. Make sure you
have inserted the batteries in
correct position.
3. Close the cover by place it back to its
original position.
You should hear click sound when the cover is
locked properly.
• Thesignalmaynotbereceivedproperlyifelectronicflourescentlampssuchasinverterflourescentlampsare
operating in the same space.
• Ifotherelectricalproductsoperatebytheremotecontroller,callyournearestcontactcenter.
Correct disposal of batteries in this product
(Applicable in countries with separate collection systems)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with
otherhouseholdwasteattheendoftheirworkinglife.Wheremarked,thechemicalsymbolsHg,CdorPbindicatethatthe
battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66.
If batteries are not properly disposed of, these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle
them through your local, free battery return system.
English-13
Maldives ET IB&IM_DB68-06219A-00_EN.indd 13
2016/5/16 10:26:38
Basic function
Basic operation is an operation mode that can be selected by pressing the Mode button.
Auto
In Auto mode, the air conditioner will automatically set the temperature and fan speed depending on the room temperature
detected by the room temperature.
• If using a multi system, in Auto operation, the system selects a temperature setting and an appropriate operation mode
(COOL or HEAT) based on the room temperature at the start of the operation.
Cool
In Cool mode, the air conditioner will cool your room. You can adjust the temperature and the fan speed to feel cooler in hot
season.
• If current outside temperatures are much higher than the selected indoor temperature, it may take time to bring the inner
temperature to the desired coolness.
• Quiet mode(
, ) makes the noise quieter during operating the indoor unit in the Cool mode.
Dry
The air conditioner in Dry mode acts like a dehumidifier by removing moisture from the indoor air.
Dry mode makes the air feel refreshing in a humid climate.
To maximize the dehumidification capacity during the Dry operation, the air conditioner could be
operating at lower or higher temperature than the remote controller set temperature.
Fan
Fan mode can be selected to ventilate your room. Fan mode will be helpful to refresh the stale air in your room.
Heat
The air conditioner heats as well as cools. Warm your room with this versatile appliance in the cold of winter.
• Fan may not operate for about 3~5 minutes at the beginning to prevent any cold blasts while the air conditioner is
warming up.
, ) makes the noise quieter during operating the indoor unit in the Heat mode.
• Quiet mode(
• Since the air conditioner heats the room by taking heat energy from outdoor air, the heating capacity may decrease when
outdoor temperature is extremely low.
Use an additional heating appliance in combination with the air conditioner if you feel the air conditioner heats
insufficiently.
English-14
Maldives ET IB&IM_DB68-06219A-00_EN.indd 14
2016/5/16 10:26:38
button to turn on the air conditioner.
Press the
button to set the operating mode.
• Each time you press the Mode button, the mode will change in order of Auto, Cool, Dry, Fan and Heat.
Press the
button to set the desired fan speed.
Auto
(Auto)
Cool
(Auto),
Dry
(Auto)
Fan
Heat
Press the
02 Basic function
Press the
(Low),
(Auto),
(Low),
(Med),
(Low),
(Med),
(High)
(High)
(Med),
(High)
button to adjust the temperature.
Auto
You can adjust the desired temperature by 1°C within the range of 16°C~30°C.
Cool
You can adjust the desired temperature by 1°C within the range of 16°C~30°C.
Dry
You can adjust the desired temperature by 1°C within the range of 18°C~30°C.
Fan
Temperature adjustment is not possible.
Heat
You can adjust the desired temperature by 1°C within the range of 16°C~30°C.
• Air flow can be adjusted manually.(see page 16 for instructions.)
English-15
Maldives ET IB&IM_DB68-06219A-00_EN.indd 15
2016/5/16 10:26:39
Adjusting the air flow direction
Air flow can be directed to your desired position.
Vertical air flow
Air flow blades move up and down.
Press the Air swing
button on the remote controller.
ff
Air swing indicator will be on and air flow blades move up and down continuously to
circulate the air.
f ff
PresstheAir swing
button on the remote controller again, to keep the air flow
direction in a constant position.
Horizontal air flow
Make sure one of the blade pin lever that stick out of the air flow blades are not broken.
Move the blade pin lever left or right to keep the air flow direction in a constant
position you prefer.
• B eextremelycarefulwithyourfingerswhileadjustingtheHorizontal
air flow direction.
There is a potential risk of personal injury when the unit is
mishandled.
Blade pin lever
English-16
Maldives ET IB&IM_DB68-06219A-00_EN.indd 16
2016/5/16 10:26:40
using the Smart Saver function
This function will set the temperature range limit to help you save energy while the air conditioner is operating in Cool mode.
ff
Smart Saver indicator and air swing indicator appears automatically on the remote
controller display.
The air flow blades move up and down.
ff
If the current set temperature is lower than 24°C, it will automatically raise to 24°C.
Cancel
PresstheSmart Saver button once again.
03 AdvAnCEd FunCtIOn
Press the Smart Saver button on the remote controller while the air conditioner is
operating in Cool mode.
• S martSaverfunctionisonlyavailableinCoolmode.
• WhenSmartSaverfunctionisactivated,temperaturerangewillbelimitedto
24°C~30°C.
• Ifthedesiredtemperatureislowerthan24°C,turnofftheSmartSaverfunction
by pressing the Smart Saver button again.
• Temperature/Fanspeedcanalsobeadjusted(seepage15forinstructions).
• Airflowcanbeadjustedmanually(seepage16forinstructions).
• IfyoupresstheMode button while the Smart Saver function is on, it will cancel
the function.
using the turbo function
Turbo function will be helpful to cool your room quickly and effectively.
Press the Turbo button on the remote controller during Cool mode.
ff
Turbo indicator appears on the remote controller display and the air conditioner
operates in Turbo function for 30 minutes.
Cancel
PresstheTurbo button once again.
• T urbofunctionisonlyavailableinCoolmode.
• IfyoupresstheMode button while the Turbo function is on, it will cancel
the function.
• Temperature/Fanspeedcannotbeadjustedwhileusingthisfunction.
English-17
Maldives ET IB&IM_DB68-06219A-00_EN.indd 17
2016/5/16 10:26:40
using the Quiet function
You can reduce the noise generated from an indoor unit.
Press the Quiet button on the remote controller while the air conditioner is operating
in Cool/Heat mode.
ff
Quietindicatorappearsontheremotecontrollerdisplay.
ff
The indoor unit will operate more quietly.
Cancel
PresstheQuiet button once again.
• Ifusingamultisystem,thisfunctionwillworkonlywhentheQuietfunctionis
set on all operated indoor units.
using the Auto Clean function
Auto clean function will prevent from growing mold by eliminating the moisture inside of the indoor unit. Your indoor unit
evaporates the moisture inside of the unit. Activate this function to provide you with more clean and healthier air.
Press the Auto Clean button.
When the air conditioner is turned off,
fThe Auto clean indicator on the indoor unit display appears and the Auto clean function
runs.
When the air conditioner is turned on,
fAfter stopping the air conditioner operation , the Auto clean indicator on the indoor
unit display appears and the Auto clean function runs.
 Auto Clean time can vary, depending on the previously used mode.
Auto(cool), Cool, Dry mode : approximately 30 minutes.
Auto(heat), Heat, Fan mode : approximately 15 minutes.
Cancel
PresstheAuto Clean button once again.
• W
hentheairconditioneristurnedon,theAutocleanfunctionrunsafter
stopping the air conditioner operation.
English-18
Maldives ET IB&IM_DB68-06219A-00_EN.indd 18
2016/5/16 10:26:41
mode
For a comfortable sleep, the air conditioner will operate it Fall asleep  Sound sleep  Wake up from
mode.
When the air conditioner is on and in cool/heat mode
button on the remote controller.
indicator appears and Off timer indicator starts blinking on the remote
controller display.
2. Press the Time Up or Time Down button to set the time.
f 
You can set the time in half hourly unit from 30 minutes ~ 3 hours and hour unit from
3 hours ~ 12 hours.
f 
Operating hour can be set from minimum 30 minutes to maximum 12 hours.
f 
Default operation hour is set to 8 hours.
03 AdvAnCEd FunCtIOn
1. Press the
f 
3. Press the Set button to active it on.
f 
Off timer indicator stops blinking and reserved time will be displayed for 3 seconds.
Then the air conditioner operates in good’sleep mode.
f 
If you don’t press Set button within 10 seconds after pressing the
or
Time Up or Time Down button, the air conditioner will return to previous status.
Check Off timer indicator and indicator on the indoor unit.
Cancel
PresstheCancel button once again.
You can set the desired temperature by 1˚C in the range of 16˚C~30˚C.
Fan speed will be adjusted automatically according to the
mode.
However, I f you select
mode while heating operation is on,
you can adjust fan speed.
Air flow direction will be adjusted automatically according to the
mode.
mode while heating operation is on,
However, if you select
you can adjust air flow direction.
Temperature and fan speed changes in
mode
• Fallasleep:Easesyouintosleepbydroppingthetemperature.
• Soundsleep:Relaxesyourbodyandraisesyourtemperatureslightly.
mode: Allows you to wake up from comfortable intermittent air and it makes you feel refreshed.
• Wakeupfrom
• S etOfftimerin
mode over 5 hours. You fell disturbed sleep if the
is set too short or long
because the default is set to 8-hour-operation.
• Ifthe
mode is set less than 4 hours, the operation will stop at the same time.
If the
mode is set over 5 hours, it will run as Wake up stage from the last one hour before it stops.
• Recommendedsettemperatureisbetween25˚C~27˚Cforcoolingand21˚C~23˚Cforheating.
English-19
Maldives ET IB&IM_DB68-06219A-00_EN.indd 19
2016/5/16 10:26:41
Setting the On/Off timer
You can set the air conditioner to turn on/off automatically at desired time.
Setting On timer while the air conditioner is off / Off timer while the air conditioner is on
Setting On timer
1. Press the On Timer/Off Timer button.
f 
On/Off timer indicator will blink on the remote controller display.
2. Press the Time Up or Time Down button to set the time.
f 
You can set the time in half hourly unit from 30 minutes ~ 3 hours and hour unit from
3 hours ~ 24 hours.
f 
Operating hour can be set from minimum 30 minutes to maximum
24 hours.
3. Press the Set button to active it on.
Setting Off timer
f 
On timer indicator stops blinking and reserved time will be displayed for
3 seconds.
f 
If you don’t press Set button within 10 seconds after selecting the time the air
conditioner will return to previous status. Check On timer or Off timer indicator and
indicator on the indoor unit.
Cancel
PresstheCancel button.
Additional options available in On timer mode
You can select from Auto/Cool/Dry/Fan/Heat.
You can adjust the temperature in Auto/Cool/Dry/Heat mode.
• O
nlythelatestsettingtimerwillbeappliedbetweentheOnTimer/OffTimer
and
Off timer functions.
• Aftersettingthetimer,thesettimewillbedisplayedfor3secondsbeforeit
disappears.
English-20
Maldives ET IB&IM_DB68-06219A-00_EN.indd 20
2016/5/16 10:26:42
Combining On Timer and Off Timer
If the air conditioner is on
If the air conditioner is off
Preset time on On timer is shorter than Off timer
Ex) On timer : 3 hours, Off timer : 5 hours
- The air conditioner will operate On timer after 3 hours
from the moment you have set the timer.
Your air conditioner will remain on for 2 hours and then
turn off automatically.
03 Advanced function
Preset time on On timer is longer than Off timer
Ex) On timer : 3 hours, Off timer : 1 hour
- The air conditioner will operate the Off timer after
1 hour from the moment you have set the timer.
Your air conditioner will turn on after 2 hours.
• On timer and Off timer setting time should be different from each other.
• Press the Cancel button on the remote controller while timer combination is on.
Both of the On and Off timer will be canceled and the indicator will disappear.
English-21
Maldives ET IB&IM_DB68-06219A-00_EN.indd 21
2016/5/16 10:26:42
Cleaning the air conditioner
CAUTION
•Make sure to turn off the power of the indoor unit and cut-off
the power supply before cleaning the air conditioner.
Cleaning the indoor unit
ffWipe the surface of the unit with a slightly damp micro fiber cloth
when needed.
• C
ontact the service center when you clean the indoor unit
heat exchanger because it needs to be disassembled.
•Do not clean the display using alkaline detergent.
CAUTION •Do not use sulfuric acid, hydrochloric acid, organic solvents
(such as thinner, kerosene and acetone etc.) to clean the
surface of the product or put any stickers on it.
They may damage the surface of the air conditioner.
Cleaning the outdoor unit heat exchanger
ffWhen dust accumulates on the heat exchanger, it may decrease
cooling performance. Therefore, clean it regularly.
ffSpray water to clean the dust.
• If it is difficult to clean the outdoor unit heat exchanger on
your own, contact service center.
CAUTION
•Be careful with the sharp edges on the
outdoor unit heat exchanger.
Heat exchanger
(Illustration may differ slightly
depending on the models)
Opening the panel
Tightly grab top of the front panel and pull it down to open.
Then slightly lift the panel up.
English-22
Maldives ET IB&IM_DB68-06219A-00_EN.indd 22
2016/5/16 10:26:42
Removing the Air filter
04 OthErS
Grab the handle and lift it up. Then, pull the Air filter towards
you and slide it down.
Air filter
Cleaning the air filter
Washable foam based air filter captures large particles from the air. The filter is cleaned with a vacuum or by hand washing.
Open the panel and put the Air filter out.
Clean the Air filter with a vacuum cleaner or soft brush.
If dust is too heavy, rinse it with running water.
Insert the Air filter back in its original position
and close the front panel.
Dry the Air filter in a ventilated area.
• C
leantheAirfilterevery2weeksorwhenthefiltercleanreminderlightsup.Cleaningtermmaydifferdepending
on the usage and environmental conditions. In dusty area, clean it once a week.
• IfyouturnofftheairconditionerbypressingPower button, the filter clean reminder will be turned off.
• IftheAirfilterdriesinaconfined(orhumid)area,odorsmaygenerate.Ifitoccurs,re-cleananddryitina
well-ventilated area.
English-23
Maldives ET IB&IM_DB68-06219A-00_EN.indd 23
2016/5/16 10:26:43
Maintaining the air conditioner
If the air conditioner will not be used for an extended period of time, dry the air conditioner to maintain it in best condition.
1.Dry the air conditioner thoroughly by operating in Fan mode for 3 to 4 hours
and cut-off the power supply. There may be internal damage if moisture is left
in components.
2.Before using the air conditioner again, dry the inner components of the air
conditioner again by running in Fan mode for 3 to 4 hours. This helps remove
odors which may have generated from dampness.
Periodical checks
Refer to the following chart to maintain the air conditioner properly.
Type
Every 2
weeks
Description
Clean the air filter (1)
Indoor
unit
Every 3
months
Every 4
months

Clean the condensate drain pan (2)

Thoroughly clean the heat exchanger (2)

Clean the cross fan (2)

Clean the condensate drain pipe (2)

Replace the remote controller batteries (1)

Clean the heat exchanger on the outside of the unit (2)
Outdoor
unit
Once a year

Clean the heat exchanger on the inside of the unit (2)

Clean the electric components with jets of air (2)

Verify that all the electric components are firmly
tightened (2)

Clean the fan (2)

Verify that all the fan assembly is firmly tightened (2)

Clean the condensate drain pan (2)

 : This check mark requires checking the indoor/outdoor unit periodically.
Follow the description to maintain the air conditioner properly.
(1) The described operations should be performed more frequently if
the area of installation is very dusty.
CAUTION
(2) These operations must always be performed by qualified personnel.
For more detailed information, see the installation part in the
manual.
English-24
Maldives ET IB&IM_DB68-06219A-00_EN.indd 24
2016/5/16 10:26:43
Troubleshooting
Refer to the following chart if the air conditioner operates abnormally. This may save
time and unnecessary expenses.
SOLUTION
The air
conditioner does
not work at all.
•Check power status and then operate the air conditioner
again.
• Plug in or switch on the circuit breaker and then operate the
air conditioner again.
• Check if you have set the Off Timer. Operate the air
conditioner again by pressing the Power button.
The temperature
adjustment is not
working.
• Check if you have selected Fan/Turbo mode. In these
modes, desired temperature is set to auto and you cannot
adjust the temperature.
Cool/Warm air
does not come
out of the air
conditioner.
• Check if the set temperature is higher(during Cool mode)/
lower(during Heat mode) than the current temperature.
Press the Temp + or - button on the remote controller to
change the set temperature.
• Check if the Air filter is blocked by dirt. If there is a lot of
dust on the Air filter, cooling(heating) performance may
decrease. Clean them frequently.
• Check if the outdoor unit is covered or installed near the
obstacle. Take the cover off and take the obstacle away.
• If you want to operate the air conditioner in the sunlight,
cover the outdoor unit using curtains or etc.
• Check if the air conditioner is operating in De-ice mode.
When the ice formed in winter or the outdoor temperature
is too low, the air conditioner operates in De-ice mode
automatically. In De-ice mode, indoor fan stops and cool air
does not come out.
• If the doors or windows are open, it may cause bad cooling
(heating) performance.
Close the doors and windows.
• Check if the air conditioner has just been turned on after
stopping cooling(heating) operation. In this case, just a fan
will run to protect the outdoor unit compressor.
• Check if the pipe length is too long. When the pipe length
exceeds maximum allowable pipe length, cooling (heating)
performance may decrease.
04 Others
PROBLEM
English-25
Maldives ET IB&IM_DB68-06219A-00_EN.indd 25
2016/5/16 10:26:43
Troubleshooting
PROBLEM
SOLUTION
Air flow
adjustment is not
working.
mode. In
• Check if you have selected Auto/Dry/
these modes, desired temperature is set to auto and you
cannot adjust the temperature.
Fan speed
adjustment is not
working.
• Check if you have selected Auto/Dry/Turbo/
mode. In these mode, fan speed is set to Auto and you
cannot adjust the fan speed.
Remote
controller is not
working.
• Check if your batteries are depleted.
• Make sure nothing is blocking your remote controller
sensor.
• Check that there are strong lighting apparatus near the air
conditioner. Strong light which comes from fluorescent
bulbs or neon signs may interrupt the electric waves.
Timer function
does not set.
• Check if you press the Set button on the remote controller
after you have set the time.
The indicator
is blinking
continuously.
• Press the Power button or disconnect the power plug/
switch off the auxiliary power switch.
If the indicator is still blinking, contact the service center.
Odors permeate
in the room
during operation.
• Check if the appliance is running in a smoky area. Ventilate
the room or operate the air conditioner in Fan mode for
1~2 hours. (We do not use smelly components in the air
conditioner.)
Error is indicated.
• When an indoor unit indicator blinks, contact the nearest
service center.
Noise is
generated.
• Depending on the status of the air conditioner usage, noise
can be heard when refrigerant flow movement changes. It is
normal.
Smoke is
generated from
the outdoor unit.
• If may not be a fire but it can be a steam generated by the
defrost operation from outdoor heat exchanger during Heat
mode in winter.
Water is dropping • Water may be generated because of the temperature
from the outdoor
difference. It is normal.
unit piping
connection.
English-26
Maldives ET IB&IM_DB68-06219A-00_EN.indd 26
2016/5/16 10:26:44
Safety precautions
Carefully follow the precautions listed below because they are essential to guarantee the safety of the equipment.
• Always disconnect the air conditioner from the power supply before servicing it or accessing its internal components.
• Verify that the air conditioner is not installed in an easily accessible area.
General information
 Carefully read the content of this manual before installing the air conditioner and store the manual in a safe place in order
05 Installation
• Verify that installation and testing operations are performed by qualified personnel.
to be able to use it as reference after installation.
For maximum safety, installers should always carefully read the following warnings.
Store the operation and installation manual in a safe location and remember to hand it over to the new owner if the air
conditioner is sold or transferred.
This manual explains how to install an indoor unit with a split system with two SAMSUNG units.
The use of other types of units with different control systems may damage the units and invalidate the warranty.
The manufacturer shall not be responsible for damages arising from the use of non compliant units.
The manufacturer shall not be responsible for damage originating from unauthorized changes or the improper connection
of electric and requirements set forth in the “Operating limits” table, included in the manual, shall immediately invalidate
the warranty.
The air conditioner should be used only for the applications for which it has been designed: the indoor unit is not suitable
to be installed in areas used for laundry.
Do not use the units if damaged. If problems occur, switch the unit off and disconnect it from the power supply.
In order to help prevent electric shocks, fires or injuries, always stop the unit, disable the protection switch and contact
SAMSUNG’s technical support if the unit produces smoke, if the power cable is hot or damaged or if the unit is very noisy.
Always remember to inspect the unit, electric connections, refrigerant tubes and protections regularly. These operations
should be performed by qualified personnel only.
The unit contains moving parts, which should always be kept out of the reach of children.
Do not attempt to repair, move, alter or reinstall the unit. If performed by unauthorized personnel, these operations may
cause electric shocks or fires.
Do not place containers with liquids or other objects on the unit.
All the materials used for the manufacture and packaging of the air conditioner are recyclable.
The packing material and exhaust batteries of the remote controller(optional) must be disposed of in accordance with
current laws.
The air conditioner contains a refrigerant that has to be disposed of as special waste. At the end of its life cycle, the air
conditioner must be disposed of in authorized centers or returned to the retailer so that it can be disposed of correctly and
safely.
Installing the unit
IMPORTANT: When installing the unit, always remember to connect first the refrigerant tubes, then the electrical lines.
Always disassemble the electric lines before the refrigerant tubes.
 Upon receipt, inspect the product to verify that it has not been damaged during transport.
If the product appears damaged, DO NOT INSTALL it and immediately report the damage to the carrier or retailer (if the
installer or the authorized technician has collected the material from the retailer.)
English-27
Maldives ET IB&IM_DB68-06219A-00_EN.indd 27
2016/5/16 10:26:44
Safety precautions
 After completing the installation, always carry out a functional test and provide the instructions on how to operate the air
conditioner to the user.
 Do not use the air conditioner in environments with hazardous substances or close to equipment that release free flames to
avoid the occurrence of fires, explosions or injuries.
 To help prevent injury when accidentally touching the indoor unit fan, install the indoor unit at least 2.5 m above the floor.

The air conditioner should be used only for the applications for which it has been designed : the indoor unit is not suitable
to be installed in areas used for laundry.

Our units must be installed in compliance with the spaces indicated in the installation manual to ensure either accessibility
from both sides or ability to perform routine maintenance and repairs. The units’ components must be accessible and that
can be disassembled in conditions of complete safety either for people or things.
For this reason, where it is not observed as indicated into the Installation Manual, the cost necessary to reach and repair the
unit (in safety, as required by current regulations in force) with slings, trucks, scaffolding or any other means of elevation
won’t be considered in-warranty and charged to end user.
Power supply line, fuse or circuit breaker
 Always make sure that the power supply is compliant with current safety standards. Always install the air conditioner in
compliance with current local safety standards.
 Always verify that a suitable grounding connection is available.

Verify that the voltage and frequency of the power supply comply with the specifications and that the installed power is
sufficient to ensure the operation of any other domestic appliance connected to the same electric lines.

Always verify that the cut-off and protection switches are suitably dimensioned.

Verify that the air conditioner is connected to the power supply in accordance with the instructions provided in the wiring
diagram included in the manual.

Always verify that electric connections (cable entry, section of leads, protections…) are compliant with the electric
specifications and with the instructions provided in the wiring scheme.
Always verify that all connections comply with the standards applicable to the installation of air conditioners.
Choosing the installation location
Indoor unit










For Wi-Fi Air-conditioner installation, select indoor unit location near to wireless router.
In case Wi-Fi signal strength weakened , Smart APP may be disconnected depending on the Wi-Fi signal strength.
Where airflow is not blocked.
Where cool air can be distributed throughout the room.
Install the refrigerant piping length and the height difference of both indoor and outdoor units as indicated in the
installation diagram.
Wall that prevents vibration and is strong enough to hold the product weight.
Out of the direct sunlight .
1 m or more away from the TV or radio (to prevent the screen from being distorted or noise from being generated).
As far away as possible from the fluorescent and incandescent lights (so that the remote controller can be operated well).
A place where the air filter can be replaced easily.
Don't install directly above electronics equipment as leaking water may cause damage if not serviced. (eg. Computers, TV, etc).
English-28
Maldives ET IB&IM_DB68-06219A-00_EN.indd 28
2016/5/16 10:26:44
Outdoor Unit

Where it is not exposed to strong wind
Well ventilated and dustless places
 Where possible keep out of sunlight and rain
 Where neighbors are not annoyed by operation sound or hot air
 Solid wall or support that prevents vibration and is strong enough to hold the product weight
 Where there is no risk of flammable gas leakage
 When installing the unit at a high place be sure to fix the unit legs
 3 m or more away from the TV or radio (to prevent the screen from being distorted or noise from being generated)
 Install the unit horizontally
 Place where drained water does not become any problem.
 Place with no plants (especially climbing plants) and where small animal can not access.
 Outdoor unit should not be place higher than 2.4 m or directly under eaves for accessibility for service and OH&S reasons.

05 Installation
• Avoid the following places to prevent malfunction of the unit
- Where there is machine oil
- Salty environment such as seaside areas
- Where sulfide gas exists
- Other special atmosphere areas
If using a multi system, install as described in the installation manual supplied with the outdoor unit.
100mm or more
125mm
or more
Wrap the refrigerant pipes and the drain hose
with the absorbent pad and vinyl tape. Refer
to page 45 for further details.
125mm
or more
You can select the direction of
draining (left or right).
'L' m as maximum pipe length
and 3 m as minimum pipe length
(It will reduce noise and vibration)
' H ' meters maximum total
pipe length
' L ' meters maximum
total pipe length
Model
L
H
07/09/12 15
8
Make at least one round: It will reduce noise and vibration
 The appearance of the unit may be different from the diagram depending on the model.
English-29
Maldives ET IB&IM_DB68-06219A-00_EN.indd 29
2016/5/16 10:26:44
Choosing the installation location
Space Requirements for Outdoor Unit
If using a multi system, install as described in the installation manual supplied with the outdoor unit.
When installing 1 outdoor unit
 Figure Description
Top view
Side view
Air intake
Air outlet
Air intake
Air outlet
,
Air flow direction.
(Unit : mm)
 When the air outlet is towards the
wall
1500 or more
300 or more
 When the air outlet is opposite the
wall
 When 3 sides of the outdoor unit are
blocked by the wall
300 or more

150 or more
 The upper part of the outdoor unit
and the air outlet is opposite the
wall
 When the walls are blocking front
and the rear side of the outdoor unit
300 or
more
300 or more
1500 or
more
500 or more
2000 or more
1500 or more
 The upper part of the outdoor unit
and the air outlet is towards the wall
600 or more
When installing more than 1 outdoor unit
(Unit : mm)
300 or more
 When 3 sides of the outdoor unit are blocked by the wall
1500 or more
 When the air outlet is towards the wall
300 or more
600 or more
600 or more
600 or more
English-30
Maldives ET IB&IM_DB68-06219A-00_EN.indd 30
2016/5/16 10:26:45
(Unit : mm)
500 or more
300 or more
500 or more
600 or more
1500 or
more
600 or more
 When the upper part of the outdoor unit and
the air outlet is opposite the wall
300 or more
 When front and rear side of the outdoor unit is towards the wall
1500 or
more
600 or
more
3000 or
more
3000 or
more
05 Installation
300 or
more
 When the walls are blocking front and the rear side of the outdoor
units
200 or
more
• If installation is done in inappropriate space, unit may generate sound and cause bad effect on the product.
• Installation must be done in level and in a place where vibration will not cause any effect.
Accessories
The following accessories are supplied with the air conditioner:
• The number of each accessory is indicated in parentheses.
Accessories in the indoor unit case
Installation Plate
(1)
Remote controller
(1)
Batteries for
Remote controller (2)
User’s & Installation
Manual (1)
English-31
Maldives ET IB&IM_DB68-06219A-00_EN.indd 31
2016/5/16 10:26:46
Accessories
Accessories in the outdoor unit case
If using a multi system, refer to the manual supplied with the outdoor unit.
2-wire
Assembly Cable (1)
3-wire
Assembly Cable (2)
Drain Plug (1)
Rubber Leg (4)
• T he flare nuts are attached to the end of each pipe of an evaporator or a service port.
Use the nuts when connecting the pipes.
• The assembly cable is optional. If it is not supplied, use the standard cable.
• The drain plug and rubber leg are only included when the air conditioner is supplied without the assembly
pipe as seen in the picture below.
Optional accessories
If using a multi system, refer to the manual supplied with the outdoor unit.
The following connection accessories are optional. If they are not supplied, you should obtain them before installing the air
conditioner.
Insulated Assembly
Pipe, Ø9.52 mm (1)
Insulated Assembly
Pipe, Ø12.70 mm (1)
Insulated Assembly
Pipe, Ø15.88 mm (1)
24
PE T3 Foam Tube
Insulation (1)
Vinyl Tapes (2)
Drain Plug (1)
Rubber Legs (4)
Pipe Clamps A (3)
Pipe Clamps B (3)
Cement Nails (6)
M4 x 25 Tapped
Screws (6)
Drain Hose,
length 2 m (1)
Putty 100 g (1)
Foam Insulation(1)
Insulated Assembly
Pipe, Ø6.35 mm (1)
09/12
18
• If these accessories are supplied, they will be in the accessory box.
Tools required for installation
General Tools
• Vacuum Pump(Backward flowing prevention)
• Torque Wrench
• Pipe Cutter
• Reamer
• Screw Driver
• Spanner
• Drill
• Manifold Gauge
• Pipe Bender
• L Wrench
• Stud Finder
• Spirit Level
• Measuring Tape
Tools for test operations
• Thermometer
• Resistance Meter • Electroscope
English-32
Maldives ET IB&IM_DB68-06219A-00_EN.indd 32
2016/5/16 10:26:46
Fixing the installation plate
C
05 Installation
You can select the direction of the drain hose depending on where you want to install the indoor unit. Therefore before fixing
the installation plate to a wall or a window frame, you must determine the position of the 65mm hole through which the cable,
pipe and hose pass to connect the indoor unit to the outdoor unit.
When facing the wall, the pipe and cable can be connected from the:
• Right (A)
 Direction of pipe
• Left (B)
• Underside_right (C)
A
B
• Rear_right or left (D)
D
D
1. Determine the position of the pipe and drain hose hole as seen in the picture and drill the hole with an inner diameter
of 65mm so that it slants slightly downwards.
(Unit : mm)
Pipe hole
(Ø65mm)
D
A
Model
B
C
A
B
C
D
07/09/12 30
96
38
30
• M
ake sure to drill only one
hole after choosing the
direction of the pipe.
2. Fix the indoor unit.
If you fix the indoor unit on a wall
(1) F ix the installation plate to the wall giving attention to the weight of the indoor unit.
• If you mount the plate to a concrete wall using plastic anchors, make sure that gaps
between the wall and the plate, created by projected anchor, is less than 20mm.
If you fix the indoor unit on a window frame
(1) D
etermine the positions of the wooden uprights to be
attached to the window frame.
(2) A
ttach the wooden uprights to the window frame giving
attention to the weight of the indoor unit.
(3) A
ttach the installation plate to the wooden upright using
tapping screws.
Plastic
Anchor
Wall
<20mm
If you fix the indoor unit on a gypsum board
(1) Use stud finder to find out locations of the studs.
(2) Fix the plate hanger on two studs.
• S earch for other spots if there are less than two studs, or the distance between the studs are different from the
plate hanger.
• Fix the installation plate without inclining to one side.
• M
ake sure that a wall can withstand the weight of the product. If you install the product in a place where it is
not strong enough to withstand the product weight, the unit could fall and cause injury.
English-33
Maldives ET IB&IM_DB68-06219A-00_EN.indd 33
2016/5/16 10:26:47
Connecting the assembly cable
If using a multi system, install as described in the installation manual supplied with the outdoor unit.
Cable specification
Model
Power cable
Interconnection cable
07/09/12
3G1.5mm² H07RN-F
Type GL
3G1.0mm² H07RN-F
2x0.75mm² H05RN-F
20A
• C
onnectthepowercabletotheauxiliarycircuitbreaker.Ifeverypolefailstoconnecttothe
power supply, it must be incorporated in a wire with a contact opening of ≥3 mm.
• Useshieldcable(Category5;lessthan50pF/m)fornoisyenvironmentalsite.
• Powersupplycordsofpartsofappliancesforoutdooruseshallnotbelighterthan
polychloroprene sheathed flexible cord. (Code designation IEC: 60245 IEC 66/CENELEC: H07RN-F,
IEC: 60245 IEC 57/CENELEC: H05RN-F)
Connecting the cable
Electrical work
(1) For electrical and earth works, comply with the ‘technical standards of electrical installations’ and the the ‘wiring
regulations’ of the Local wiring regulations.
(2) Tightentheterminalblockscrewto1.2~1.8N•m(12~18kgf•cm).
(3)Precautionswhenconnectingterminalblocksoftheindoorunit

Before connecting, make sure the connecting part of the terminal socket is facing upwards.
Upside down

The terminal
socketis damaged.
There is no ring terminalto
cover the wire.
There must be no space between the terminal and the screw when connected.
- Any remaining space may become a fire hazard due to overheating of the electrical contact.
The terminal socket
is upside down.
Either the screw is not fitted
properly or there is a space
between the screw and the
ring terminal.
• F ortheterminalblockwiring,useawirewitharingterminalsocketonly.
Regular wires without a ring terminal socket may become a fire hazard due to overheating of the electrical
contact during a wiring work.
 When you install the unit, make first refrigerant connections and then electrical connections.
Connect the air conditioner to grounding system before performing the electrical connection.
If unit is uninstalled, first disconnect electrical cables, then refrigerant connections.
If the outdoor unit is more than 5.5 meters away from the indoor unit, you must extend the cable. The maximum length of the
cable is 15(07/09/12) meters.
1. Extend the assembly cable if necessary.
• Donotconnecttwoormoredifferentcablestoextendthelength.Itmaycausefire.
English-34
Maldives ET IB&IM_DB68-06219A-00_EN.indd 34
2016/5/16 10:26:47
05 InStAllAtIOn
2 . Open the cover panel.
3 . Remove the screw securing the connector cover.
4 . Pass the assembly cable through the rear of the indoor unit and connect the assembly cable to terminals.
(Refer to the picture below)
• Eachwireislabeledwiththecorrespondingterminalnumber.
5.
6.
7.
8.
9.
Pass the other end of the cable through the 65 mm hole in the wall.
Close the connector cover by tightening the screw carefully.
Close the cover panel.
Remove the terminal board cover on the side of the outdoor unit.
Connect the cables to the terminals as seen in the picture.
• Eachwireislabeledwiththecorrespondingterminalnumber.
Indoor unit
Indoor unit
1(L) 2(N) F1
F2
1(L) 2(N)
F2
Ground wire 
(Green/Yellow)
F1
Ground wire 
(Green/Yellow)
Outdoor unit
L
N
F1
F2
Outdoor unit
•
•
•
•
Alsocircularterminalmustbematchedwithscrewsizeinterminalblock.
Afterconnectingthecables,makesureterminalnumbersontheindoor/outdoorunitmatches.
PleaseensurethatPower&Communicationcablesareseparated,theymustnotbeinthesamecable.
Power&Communicationcableshallnotexceed30m.
10. Connect the grounding conductor to the grounding terminals.
11. Close the terminal board cover by tightening the screw carefully.
• InRussiaandEurope,consultwiththesupplyauthoritytodeterminethesupplysystemimpedancebefore
installation.
• C
onnectthewiresfirmlysothatwirescannotbepulledouteasily.
(If they are loose, it could cause burn-out of the wires.)
• Connectthewiresaccordingtocolorcodes,referringtothewiringdiagram.
• Thepowercableandtheinterconnectioncableshouldbeselectedaccordingtothespecificationinpage34.
English-35
Maldives ET IB&IM_DB68-06219A-00_EN.indd 35
2016/5/16 10:26:48
Installing and connecting the assembly pipe of the indoor unit
Connect indoor and outdoor units with field-supplied copper pipes by means of flare connections. Use insulated seamless
refrigeration grade pipe only, (Cu DHP type according to ISO1337), degreased and deoxidized, suitable for operating pressures
of at least 4200 kPa and for burst pressure of at least 20700 kPa. Under no circumstances must sanitary type copper pipe be
used.
There are 2 refrigerant pipes of different diameters:
• The smaller one is for the liquid refrigerant
• The larger one is for the gas refrigerant
A short pipe is already fitted to the air conditioner. You may
need to extend the pipe using the assembly pipe (optional).
The connection procedure for the refrigerant pipe varies
according to the exit position of the pipe when facing the wall:
• Right(A)
• Left(B)
• Underside(C)
• Rear
A
B
C
1. Cut out the appropriate knock-out piece (A or B) on the rear of the
indoor unit unless you connect the pipe directly from the rear.
2. Smooth the cut edges.
3. Remove the protection caps of the pipes and connect the assembly
pipe to each pipe. Tighten the nuts first with your hands, and then with
a torque wrench, applying the following torque:
Outer Diameter
N•m
Torque
kgf•cm
ø6.35 mm
14~18
ø9.52 mm
34~42
140~180
350~430
ø12.70 mm
49~61
500~620
ø15.88 mm
68~82
690~830
• If you want to shorten or extend the pipes, refer to page 37~38.
4. Cut off the remaining foam insulation.
5. If necessary, bend the pipe to fit along the bottom of the indoor unit.
Then pull it out through the appropriate hole.
 The pipe should not project from the rear of the indoor unit.
 The bending radius should be 100 mm or more.
6. Pass the pipe through the hole in the wall.
7. For further details on how to connect to the outdoor unit and evacuate the air, refer to page 41~43.
• T he pipe will be insulated and fixed permanently into position after finishing the installation and the gas leak test;
refer to page 45 for further details.
• T ighten the flare nut with torque wrench according to specified method.
If the flare nut is over-tightened, the flare may break and cause refrigerant gas leakage.
• DO NOT WALL UP THE PIPE CONNECTION !
All refrigerant pipe connection must be easy accessible and serviceable.
English-36
Maldives ET IB&IM_DB68-06219A-00_EN.indd 36
2016/5/16 10:26:48
Evacuating the indoor unit
The indoor unit is supplied with inert gas (nitrogen).
Before installing the unit, check if nitrogen gas flow out of indoor unit.
If this one isn’t true, DO NOT INSTALL THE UNIT since leakage could be inside the indoor unit.

05 Installation
1. Unscrew the caps at the end of each pipe.
All inert gas exhausts from the indoor unit.
• T o prevent dirt or foreign substances from getting into the
pipes during installation, do NOT remove the caps completely
until you are ready to connect the pipes.
• T he remaining air in the Refrigeration cycle, which contains
moisture, may cause malfunction on the compressor.
• Always contact the service center or a professional installation
agency for product installation.
Pipes
Unscrew the caps
Cutting or extending the pipe
The length of the pipe can be:
• Extended up to : see table page 29
• Shorten up to: see page 29
If you need a pipe longer than 5 meters:
• You must add refrigerant to the pipes; otherwise, the indoor unit may freeze.
1. Make sure that you have all the required tools (pipe cutter, reamer, flaring tool and pipe holder).
2. If you want to shorten the pipe, cut it using a pipe cutter, ensuring that the cut edge remains at 90° with the side of the
pipe (see below examples of correct and incorrect cut edges).
Pipe
cutter
Oblique
Rough
Burr
Pipe
3. To prevent a gas leak, remove all burrs at the cut edge of the pipe using a reamer.
• Face the pipe down while removing the burrs to make sure that burrs do not get in to the pipe.
English-37
Maldives ET IB&IM_DB68-06219A-00_EN.indd 37
2016/5/16 10:26:49
Cutting or extending the pipe
4. Put a flare nut slightly into the pipe and modify the flare.
90°± 2°
B
45°
± 2°
R 0.4~0.8
Pipe
Outer Diameter (D)
Depth (A)
ø6.35 mm
1.3 mm
Flaring Size (B)
8.7 - 9.1 mm
ø9.52 mm
1.8 mm
12.8 - 13.2 mm
ø12.70 mm
2.0 mm
16.2 - 16.6 mm
ø15.88 mm
2.2 mm
19.3 - 19.7 mm
Flare
5. Check if you flared the pipe correctly (see examples of incorrectly flared pipes below).
Correct
Inclined
Damaged
Surface
Cracked
Uneven
Thickness
6. Align the pipes to connect them easily. Tighten the flare nuts first with your hands, and then with a torque wrench,
applying the following torque:
Flare nut
Indoor outlet pipe
Connecting pipe
Outer Diameter
ø6.35 mm
ø9.52 mm
ø12.70 mm
ø15.88 mm
Torque
N•m
14~18
34~42
49~61
68~82
kgf•cm
140~180
350~430
500~620
690~830
• E xcessive torque can be cause of gas leakage. If extending pipe by welding/brazing please ensure nitrogen is
used during welding/brazing process. The joint must be accessible and serviceable.
7. For further details on how to connect to the outdoor unit and evacuate the air, refer to page 41~43.
• T ighten the flare nut with torque wrench according to specified method.
If the flare nut is over-tightened, the flare may break and cause refrigerant gas leakage.
English-38
Maldives ET IB&IM_DB68-06219A-00_EN.indd 38
2016/5/16 10:26:49
Installing and connecting the drain hose of the indoor unit
When installing the drain hose for the indoor unit, check if condensation draining is adequate.
When passing the drain hose through the 65 mm hole drilled in the wall, check the followings:
05 Installation
Wall
Indoor unit
Drain hose
The drain hose must NOT
slant upwards.
The end of the drain hose must NOT
be placed under water.
5cm
less
The drain hose must not
be bent.
Keep a clearance of at least
5cm between the end of the
drain hose and the ground.
Do not place the end of the
drain hose in a hollow.
2) Incorrect connection
1) Correct connection
Drain hose
Ditch
Pipe
Drain hose
Pipe
• Don’t tie drain hose to the assembly pipe which may lead to water leakage.
Drain hose installation
1. If necessary, connect the 2 meter extension drain hose to the drain hose.
2. If you use the extension drain hose, insulate the inside of the extension drain hose with a shield.
3. Fit the drain hose into 1 of 2 drain hose holes, then fix the end of the drain hose tightly with a clamp.
• If you do not use the other drain hose hole,
block it with a rubber stopper.
4. When extending the Drain Hose, hold the end of Drain Hose and Extended Hose,
rotate and insert the drain hose into Extended hose for 40~45 mm. Make sure the
two hoses are firmly connected, there is no water leakage.
Drain hose hole
5. Connect the Drain Hose after using Foam Insulation to wrap the Extended Hose. Then, Use vinyl tape to wrap the
each side of connection by 20 mm .
English-39
Maldives ET IB&IM_DB68-06219A-00_EN.indd 39
2016/5/16 10:26:50
Installing and connecting the drain hose of the indoor unit
40~45 mm
Drain hose Extension
drain hose
Drain hose
Extension
drain hose
6. Pass the drain hose under the refrigerant pipe, keeping the drain hose tight.
Shield
7. Pass the drain hose through the hole in the wall. Check if it slants
downwards as seen in the picture.
8. Using natural drainage method, check the drainage is normal.
Drain hose
20 mm 20 mm
or more or more
Foam Insulation
Vinyl Tape
Extension drain hose
• T he hose will be fixed permanently into position after finishing the installation and the gas leak test;
refer to page 45 for further details.
• M
ake sure the installed direction of the drain hose is correct.
Inadequate installation may cause condensate water leakage.
• If the drain hose is routed inside the room, insulate the hose so that dripping condensation does not damage
the furniture or floors.
• DO NOT WALL UP THE DRAIN HOSE CONNECTION !
Drain hose connection must be easy accessible and serviceable.
Changing direction of the drain hose
Change the direction only when it is necessary.
Screw hole
1. Detach the rubber cap with the plier.
Screw
2. Detach the drain hose by pulling it and turning to the left.
3. Insert the drain hose by fixing it with the screw into the groove of the drain
hose and the outlet of the drain pan.
4. Attach the rubber cap with a screwdriver by turning it to the right until it
fixes to the end of the groove.
5. Check for leakage on both side of the drain outlet.
Drain hose
Drain pan outlet
Rubber cap
Pour the water in direction of arrow.
 Direction of the drained water
• M
ake sure the indoor unit is in upright position when you pour water to check for leakage.
Make sure that the water does not overflow onto the electrical part.
English-40
Maldives ET IB&IM_DB68-06219A-00_EN.indd 40
2016/5/16 10:26:50
Installing and connecting the drain hose of the outdoor unit
While heating, ice may accumulate. During the process of defrosting, check if condensation draining is adequate. For adequate
draining, do the following.
• T o avoid drain plug from contacting the ground, secure gap between the
ground and the bottom surface of the outdoor unit.
Drain plug
Drain hole
05 Installation
1. Insert the drain plug into the drain hole on the underside of the outdoor unit.
Bottom surface of outdoor unit
2. Connect a drain hose to the drain plug.
Drain hole
Drain plug
3. Ensure that condensation draining is adequate.
Drain hose
Snow-proof hood
• In areas with heavy snow fall, piled snow could block the air intake.
To avoid this incident, install a frame that is higher than estimated snow
fall. In addition, install a snow-proof hood to avoid snow from piling on the
outdoor unit.
Estimated
snow fall Frame
Ground
Evacuating the connected pipes
If using a multi system, install as described in the installation manual supplied with the outdoor unit.
The outdoor unit is loaded with sufficient R-410A refrigerant. Do not vent R-410A into atmosphere: it is a fluorinated
greenhouse gas, covered by Kyoto Protocol, with a Global Warming Potential (GWP) = 2088.
You should evacuate the air in the indoor unit and in the pipe. If air remains in the refrigerant pipes, it affects the compressor.
It may cause reduction of cooling capacity and malfunction. Use Vacuum Pump as seen in the picture.
• W
hen installing, make sure there is no leakage. When recovering the refrigerant, ground the compressor first
before removing the connection pipe. If the refrigerant pipe is not properly connected and the compressor works
with the service valve open, the pipe inhales the air and it makes the pressure inside of the refrigerant cycle
abnormally high. It may cause explosion and injury.
English-41
Maldives ET IB&IM_DB68-06219A-00_EN.indd 41
2016/5/16 10:26:51
Evacuating the connected pipes
1. Connect each assembly pipe to the appropriate valve on the outdoor unit and
tighten the flare nut.
Outdoor unit
Indoor unit
Gas pipe side
2. Tighten the flare nut first with your hands, and then with a torque wrench,
applying the following torque.
Liquid pipe side
• Excessive torque can be cause of gas leakage.
Outer
Diameter
• M
ake the electrical connection and leave the system into “stand by
mode”. Do not turn on the system!
This is necessary for better vacuum operation (full OPEN position of
Electronic Expansion Valve - EEV -).
ø6.35 mm
ø9.52 mm
ø12.70 mm
ø15.88 mm
3. Connect the charging hose of the low-pressure side of manifold gauge to a
gas service port as seen in the picture.
Torque
N•m
kgf•cm
14~18 140~180
34~42 350~430
49~61 500~620
68~82 690~830
Manifold gauge
4. Open the valve of the low pressure side of manifold gauge counterclockwise.
5. Evacuate the air in the connected pipes using the vacuum pump for about
15 minutes.
 Make sure that pressure gauge shows -0.1 MPa(-76 cmHg) after about
Valve
Gas service port
<Low pressure>
10 minutes.
This procedure is very important to avoid a gas leak.
Close the valve of the low pressure side of manifold gauge clockwise.
Turn off the vacuum pump.
Check for 2 minutes if there is any pressure change.
Remove the hose of the low pressure side of manifold gauge.
Liquid service port
<High pressure>
Vacuum
Pump
(Backward flowing
prevention)
6. Set a valve cork of liquid and gas service port to the open position.
Adding Refrigerant
Add refrigerant charge according to table below:
If you use a pipe longer than 5 m,
‘A’ g of refrigerant R-410A must be added for each extra meter.
If you use a pipe shorter than 5 m,
The evacuate time is normal.
Model
A
07/09/12
15
Refer to the Service Manual for further details.
• T he remaining air in the Refrigeration cycle, which contains moisture, may cause malfunction on the compressor.
• Always contact the service center or a professional installation agency for product installation.
English-42
Maldives ET IB&IM_DB68-06219A-00_EN.indd 42
2016/5/16 10:26:51
Important information regulation regarding the refrigerant used
This product contains fluorinated greenhouse gases.
Do not vent gases into the atmosphere.
Refrigerant type
R-410A
GWP value
2088
• GWP=Global Warming Potential
• Calculating tCO2e : kg x GWP / 1000
Indoor unit
05 Installation
•Inform user if system contains 5 tCO2e or more of fluorinated
greenhouse gases. In this case, it has to be checked for
leakage at least once every 12 months, according to
regulation n°517/2014. This activity has to be covered by
qualified personnel only. In case situation above (5 tCO2e or
more of R-410A), installer(or recognized person which has
responsibility for final check) has to provide a maintenance
book, with all the information recorded according to
REGULATION(EU) No 517/2014 OF THE EUROPEAN
PARLIAMENT AND OF THE COUNCIL of 16 April 2014 on
fluorinated greenhouse gases.

1. Please fill in the following with indelible ink on the refrigerant
charge label supplied with this product and on this manual.
d
  the factory refrigerant charge of the product,

Outdoor unit

 the additional refrigerant amount charged in the field and

+ the total refrigerant charge. on the refrigerant charge label
supplied with the product.
a. F actory refrigerant charge of the product:
see unit name plate
b. A
dditional refrigerant amount charged in the field (Refer
to the above information for the quantity of refrigerant
replenishment.)
c. Total refrigerant charge
d. R efrigerant cylinder and manifold for charging
Unit
Kg
tCO2e
, a
, b
 + , c
• T he filled-out label must be adhered in the proximity of the product charging port (e.g. onto the inside of
the stop valve cover).
Charging the refrigerant under conditions of liquid by using a liquid pipe
R-410A is a mixed type of refrigerant. It is necessary for recharging under conditions of liquid. When recharging refrigerant from
the refrigerant cylinder to the equipment, follow the instructions below.
1. Before recharging, check whether the cylinder has a siphon or not.
There are two ways to recharge the refrigerant.
Cylinder with siphon
Cylinder without siphon
Siphon
 Charge the refrigerant standing the
cylinder upright.
 Charge the refrigerant turning the cylinder
upside down.
• If R-410A refrigerant is charged with gas, the composition of the charged refrigerant changes and the
characteristics of the equipment vary.
• During the measuring operation of refrigerant quantity added use electronic scales.
If cylinder doesn’t have syphon, upset it.
English-43
Maldives ET IB&IM_DB68-06219A-00_EN.indd 43
2016/5/16 10:26:51
Performing the gas leak tests
If using a multi system, install as described in the installation manual supplied with the outdoor unit.
Make sure to check for gas leaks before completing the installation process (connecting the assembly pipe and hose between
indoor unit and outdoor unit, insulating the cables, hose and pipe, and fixing the indoor unit to the installation plate).
A
D
C
B
Test part for outdoor unit
Test part for indoor unit
 Before inspecting the leakage, use a torque wrench
Tightening torque for body cap
(Refer to the table)
to close the cap for the service valve. (Comply with a
tightening torque for each size of the diameter,and
tighten the cap firmly to prevent any leakage.).
 To check for any possible leakage, insert inert gas into
the pipes connected to indoor/outdoor units and
check the connection part of the indoor/outdoor units
with soap lather or liquid for leakage test.
Spindle
Charging
core
R-22: Diameter of the screw - 7/16-20UNF
R-410A: Diameter of the screw - 1/2-20UNF
Tightening torque for charging port cap
(Refer to the table)
To check for gas leaks on the outdoor unit,
Check the valve A and B using a leak detector.
To check for gas leaks on the indoor unit,
Check the flare nut C and D using a leak detector.
Outer
Diameter
(mm)
Tightening torque
Body cap (N•m)
Charging port cap
(N•m)
20 ~ 25
20 ~ 25
25 ~ 30
30 ~ 35
35 ~ 40
10 ~ 12
ø 6.35
ø 9.52
ø12.70
ø15.88
ø19.05
( 1 N•m = 10 kgf•cm )
Leak test with nitrogen (before opening valves)
In order to detect basic refrigerant leaks, before recreating the vacuum and recirculating the R-410A, it’s responsible of
installer to pressurize the whole system with nitrogen (using a cylinder with pressure reducer) at a pressure above 40 bar
(gauge).
Leak test with R-410A (after opening valves)
Before opening valves, discharge all the nitrogen from the system and create vacuum according to page 41~43.
After opening valves, check leaks using a leak detector for refrigerant.
Pump down (before disconnecting the refrigerant connections for unit repair, removal or disposal)
Pump-down is an operation intended to collect all the system refrigerant in the outdoor unit.
This operation must be carried out before disconnecting the refrigerant tubing in order to avoid refrigerant loss to the
atmosphere.
 Shut off the liquid valve with the Allen wrench.
 Turn the system on in cooling with fan operating at high velocity.
(Compressor will immediately start, provided 3 minutes have elapsed since the last stop).
 After 2 minutes of operation, shut the suction valve with the same wrench.
 Turn the system off and switch mains supply off.
 Disconnect tubing. After disconnection, protect valves and tubing ends from dust.
 Compressor damage may occur if run at a negative suction pressure.
English-44
Maldives ET IB&IM_DB68-06219A-00_EN.indd 44
2016/5/16 10:26:52
Fixing the indoor unit in place
Perform the following work on the area where gas leak test was done priory.
After checking for gas leaks in the system, insulate the pipe, hose and cables.
Then place the indoor unit on the installation plate.
Insulation
05 Installation
1. To minimise condensation problems, wrap foam insulation (as shown in the
figure) on a part without insulation on the end of the pipes.
Pipes
2. Wind the pipe, assembly cable and drain hose with vinyl tape.
3. Place the bundle (the pipe, assembly cable and drain hose) in the lower part
of the indoor unit carefully so it does not project from the rear of the indoor
unit.
4. Hook the indoor unit to the installation plate and move the unit to the right
and left until it is securely in place.
Installation
plate
Vinyl tape
Connecting
pipes
Connecting wires
• M
ake sure pipe does not move when you install the indoor unit on
an installation plate.
Drain hose
5. Wrap the rest of the pipe with vinyl tape.
6. Attach the pipe to the wall using clamps (optional).
Fixing the outdoor unit in place
'X' mm
'Y'
Install the outdoor unit in level on a stable base to help avoid the generation of noise and
vibration, especially when installing the unit close to a neighbor.
If you install the outdoor unit in a place exposed to strong winds or at a height, fix it to an
appropriate support (wall or ground).
1. Place the outdoor unit as indicated on the top of the unit to let the discharged air out
properly.
2. Fix the outdoor unit in level to an appropriate support using anchor bolts.
3. If the outdoor unit is exposed to strong winds, install shield plates around the
outdoor unit so that the fan can operate correctly.
Rubber leg
Model
X
Y
09/12
507
292
AJ040/050
612
317
AJ052/068/
070/080
AJ100
660
340
620
360
• Secure the rubber leg to help prevent the generation of noise and vibration.
Outdoor unit installed on the wall by rack
• E nsure the wall will be able to suspend the weight of rack and
outdoor unit;
• Install the rack close to the column as much as possible;
• Install proper grommet in order to help reduce noise and residual
vibration transferred by outdoor unit towards wall.
Designed to cut off residual vibration
from outdoor unit to rack.
(not supplied with product)
Soft rubber designed to cut off
vibration from rack to wall.
(not supplied with product)
English-45
Maldives ET IB&IM_DB68-06219A-00_EN.indd 45
2016/5/16 10:26:52
Final check and trial operation
To complete the installation, perform the following checks and tests to
ensure that the air conditioner operates correctly.
Check the followings:
• Strength of the installation site
• Tightness of pipe connection to detect gas leak
• Electric wiring connection
• Heat-resistant insulation of the pipe
• Drainage
• Grounding conductor connection
• Correct operation (follow the steps below)
1. Press the Power
button and check the following:
 The indicator on the indoor unit lights up.
The airflow blade opens and the fan gears up for operation.
2. Press the Mode button to select Cool or Heat mode.
 In Cool mode, use Temp +
 In Heat mode, use Temp +
or - button and set the temperature at 16°C.
or - button and set the temperature at 30°C.
• A
pproximately 3~5 minutes later, outdoor unit will start to operate and the Cool or Warm air will blow out.
• After 12 minutes of stationary condition check the indoor unit air treatment:
Cooling mode (indoor unit check)  Inlet air temp. - Outlet air temp : From 10°K to 12°K ( indicative delta T)
Heating mode (indoor unit check)  Outlet air temp. - Inlet air temp : From 11°K to 14°K (indicative delta T)
In heating mode, the indoor fan motor can remain off to avoid cold air blown into conditioned space.
3. Press the Air swing
button and check the following:
 The airflow blades work properly.
4. Press the Power
button to stop the operation.
• W
hen you complete the installation successfully, hand over this manual to the user for storage in a handy and safe
place.
Pump down procedure (when removing the product)
1. Turn on the air conditioner and select Cool mode to run the compressor for 3 minutes.
2 . Release the valve caps on High and Low pressure side.
3 . Use L wrench to close the valve on the high pressure side.
4 . Approximately 1 minutes after, close the valve on the low pressure side.
5 . Stop operation of the air conditioner.
6 . Disconnect the pipes.
English-46
Maldives ET IB&IM_DB68-06219A-00_EN.indd 46
2016/5/16 10:26:52
How to connect your extended power cables
Items to prepare
(compressor and insulation tape should be prepared by an installation technician.)
Crimping pliers
Connection sleeve (mm)
Insulation tape
Contraction tube (mm)
MH-14
20xØ7.0(HxOD)
Width 18 mm
50xØ8.0(LxOD)
Shape
1. As shown in the figure, peel off the shields from the rubber/wire
of the power cable.
- Peel off 20 mm of the wire shields of the tube installed already.
• For information about the power cable specifications for indoor and
outdoor units, refer to the installation manual.
• After peeling off the tube wire, you must insert a contraction tube.
(Unit: mm)
Power cable (provided by us)
20
20
05 Installation
Tools
Spec
20
60
120
180
Wire tube power cable
20
2. Insert both sides of core wire of the power cable into the connection sleeve.
Connection sleeve
3. Using a compressor, compress the two points and flip it over
and compress another two points in the same location.
- The compression dimension should be 8.0.
- After compressing it, pull both sides of the wire to
make sure it is firmly pressed.
Comp. dim.
Compress it 4 times
4. Wrap it with the insulation tape twice or more and position your contraction
tube in the middle of the insulation tape. A total of three or more layers of
insulation is required.
5. Apply heat to the contraction tube to contract it.
6. After tube contraction work is completed, wrap it with the
insulation tape to finish.
- Make sure that the connection parts are not exposed to outside.
- Be sure to use insulation tape and a contraction tube made of approved reinforced insulating materials that have the same level of withstand voltage
with the power cable. (Comply with the local regulations on extensions.)
5 mm
Insulation tape
40 mm
Contraction tube
Insulation tape
• In case of extending the electric wire, please DO NOT use a round-shaped pressing socket.
- Incomplete wire connections can cause electric shock or a fire.
English-47
Maldives ET IB&IM_DB68-06219A-00_EN.indd 47
2016/5/16 10:26:53
Sub PCB installation(optional)
Only for multi system
(Wried remote controller, central remote controller etc.)
1. Turn the power off and take off the front panel of the indoor unit.
2. Take off the Cover PCB.
3. Attach the Sub PCB to the right side of the Panel-frame.
Cover PCB
4. Find the PCB wire, and connect the wire to the Sub PCB as seen in the picture.
5. Connect the wire(remote controller, central remote controller etc) to the Sub
PCB.
Sub PCB
6. Assemble the Cover PCB and the front panel.
• The Sub PCB is attached to be controlled by the wired remote controller and central controller.
English-48
Maldives ET IB&IM_DB68-06219A-00_EN.indd 48
2016/5/16 10:26:53
05 Installation
English-49
Maldives ET IB&IM_DB68-06219A-00_EN.indd 49
2016/5/16 10:26:54
QUESTIONS OR COMMENTS?
COUNTRY
CALL
OR VISIT US ONLINE AT
UK
EIRE
www.samsung.com/uk/support
www.samsung.com/ie/support
PORTUGAL
LUXEMBURG
NETHERLANDS
0330 SAMSUNG (7267864)
0818 717100
0180 6 SAMSUNG bzw.
0180 6 7267864*
(*0,20 €/Anruf aus dem dt. Festnetz, aus dem Mobilfunk max. 0,60 €/Anruf)
[HHP] 0180 6 M SAMSUNG bzw.
0180 6 67267864*
(*0,20 €/Anruf aus dem dt. Festnetz, aus dem Mobilfunk max. 0,60 €/Anruf)
01 48 63 00 00
800-SAMSUNG (800.7267864)
0034902172678
[HHP] 0034902167267
808 20 7267
261 03 710
0900-SAMSUNG (0900-7267864) (€ 0,10/Min)
BELGIUM
02-201-24-18
NORWAY
DENMARK
FINLAND
SWEDEN
815 56480
70 70 19 70
030-6227 515
0771 726 7864 (0771-SAMSUNG)
801-172-678* lub +48 22 607-93-33*
Dedykowana infolinia do obsługi zapytań dotyczących telefonów komórkowych:
801-672-678* lub +48 22 607-93-33*
* (koszt połączenia według taryfy operatora)
0680SAMSUNG (0680-726-786)
0680PREMIUM (0680-773-648)
0800-SAMSUNG (0800-7267864)
[Only for Premium HA] 0800-366661
[Only for Dealers] 0810-112233
GERMANY
FRANCE
ITALIA
SPAIN
POLAND
HUNGARY
AUSTRIA
SWITZERLAND
CZECH
SLOVAKIA
CROATIA
BOSNIA
MONTENEGRO
SLOVENIA
SERBIA
BULGARIA
ROMANIA
CYPRUS
GREECE
LITHUANIA
LATVIA
ESTONIA
0800 726 78 64 (0800-SAMSUNG)
800 - SAMSUNG
(800-726786)
0800 - SAMSUNG
(0800-726 786)
072 726 786
055 233 999
020 405 888
080 697 267 (brezplačna številka)
011 321 6899
*3000 Цена в мрежата
0800 111 31 , Безплатна телефонна линия
*8000 (apel in retea)
08008-726-78-64 (08008-SAMSUNG) Apel GRATUIT
8009 4000 only from landline, toll free
80111-SAMSUNG (80111 726 7864) only from land line
(+30) 210 6897691 from mobile and land line
8-800-77777
8000-7267
800-7267
Maldives ET IB&IM_DB68-06219A-00_EN.indd 50
www.samsung.com/de/support
www.samsung.com/fr/support
www.samsung.com/it/support
www.samsung.com/es/support
www.samsung.com/pt/support
www.samsung.com/be_fr/support
www.samsung.com/nl/support
www.samsung.com/be/support (Dutch)
www.samsung.com/be_fr/support (French)
www.samsung.com/no/support
www.samsung.com/dk/support
www.samsung.com/fi/support
www.samsung.com/se/support
www.samsung.com/pl/support
www.samsung.com/hu/support
www.samsung.com/at/support
www.samsung.com/ch/support (German)
www.samsung.com/ch_fr/support (French)
www.samsung.com/cz/support
www.samsung.com/sk/support
www.samsung.com/hr/support
www.samsung.com/support
www.samsung.com/support
www.samsung.com/si
www.samsung.com/rs/support
www.samsung.com/bg/support
www.samsung.com/ro/support
www.samsung.com/gr/support
www.samsung.com/lt/support
www.samsung.com/lv/support
www.samsung.com/ee/support
2016/5/16 10:26:54
Download PDF