Samsung | NP-R50 | Samsung NP-R50 Vartotojo vadovas

R50 1.1
Notices
No part of this publication may be reproduced, stored in a retrieval system, or
transmitted, in any form or by any means, mechanical photocopying, recording or
otherwise, without the prior written permission of the manufacturer.
The information within this manual is subject to change without notice.
The manufacturer shall not be held liable for technical or editorial errors or omissions
contained in herein; nor for incidental or consequential damages resulting from the
furnishing, performance or use of this material.
Microsoft Windows is a registered trademark of the Microsoft Corporation.
Product names mentioned herein are for identification purposes only, and may be
trademarks and/or registered trademarks of their respective companies.
Macrovision Statement
If your computer has a DVD drive and an analog TV Out port, the following
paragraph applies:
This product incorporates copyright protection technology that is protected by method
claims of certain U.S. patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
Copyright 2003 All rights are reserved
Notices i
Important Safety Information
Safety Instructions
Your system is designed and tested to meet the latest standards for safety of
information technology equipment. However, to ensure safe use of this product, it is
important that the safety instructions marked on the product and in the documentation
are followed.
Always follow these instructions to help guard against personal injury and
damage to your system.
i
Setting Up your System
• Read and follow all instructions marked on the product and in the
documentation before you operate your system. Retain all safety and operating
instructions for future use.
• Do not use this product near water or a heat source such as a radiator.
• Set up the system on a stable work surface.
• The product should be operated only with the type of power source indicated on
the rating label.
• Ensure that the electrical outlet you are using to power your equipment is easily
accessible in case of fire or short circuit.
• If your computer has a voltage selector switch, make sure that the switch is in
the proper position for your area.
• Openings in the computer case are provided for ventilation. Do not block or
cover these openings. Make sure you provide adequate space, at least 6 inches
(15 cm), around the system for ventilation when you set up your work area.
Never insert objects of any kind into the computer ventilation openings.
• Ensure that the fan vents on the bottom of the casing are clear at all times. Do
not place the computer on a soft surface, doing so will block the bottom vents.
• If you use an extension cord with this system, make sure that the total ampere
rating on the products plugged into the extension cord does not exceed the
extension cord ampere rating.
ii Users Manual
Care During Use
• Do not walk on the power cord or allow anything to rest on it.
• Do not spill anything on the system. The best way to avoid spills is to not eat or
drink near your system.
• Some products have a replaceable CMOS battery on the system board. There is
•
•
a danger of explosion if the CMOS battery is replaced incorrectly. Replace the
battery with the same or equivalent type recommended by the manufacturer.
Dispose of batteries according to the manufacturer’s instructions. If the CMOS
battery requires replacement insure that a qualified technician performs the task
When the computer is turned off, a small amount of electrical current still flows
through the computer. To avoid electrical shock, always unplug all power
cables, remove the battery and modem cables from the wall outlets before
cleaning the system.
Unplug the system from the wall outlet and refer servicing to qualified
personnel if:
– The power cord or plug is damaged.
– Liquid has been spilled into the system.
– The system does not operate properly when the operating instructions are
followed.
– The system was dropped or the casing is damaged.
– The system performance changes.
The Instruction On Safety Operation of NotePC
1. At installation and operation of devices it is necessary to carry out requirements of
the user's guide.
2. Devices can be used only with the equipment specified in the technical
specifications of the devices.
3. At operation of devices it is necessary to carry out the basic requirements
4. At occurrence of malfunctions in the device (a smell of burnt isolation, a smoke,
etc.), it is necessary to disconnect the equipment from the power supply and to not
to inserted back before reparation.
5. Service and reparation of devices should be carried out by experts of the
manufacturer.
Technical director of the service center
Replacement Parts and Accessories
Use only replacement parts and accessories recommended by manufacturer.
Important Safety Information iii
To reduce the risk of fire, use only No. 26 AWG or larger telecommunications
line cord.
Written by: Daryl L. Osden
Do not use this product in areas classified as hazardous. Such areas include
patient care areas of medical and dental facilities, oxygen rich environments,
or industrial areas.
Battery Disposal
Do not put rechargeable batteries or products powered by non-removable
rechargeable batteries in the garbage.
Contact the Samsung Helpline for information on how to dispose of batteries that you
cannot use or recharge any longer.
Follow all local regulations when disposing of old batteries.
Laser Safety
All systems equipped with CD or DVD drives comply with the appropriate safety
standards, including IEC 825. The laser devices in these components are classified as
“Class 1 Laser Products” under a US Department of Health and Human Services
(DHHS) Radiation Performance Standard. Should the unit ever need servicing, contact
an authorized service location.
Laser Safety Note:
Use of controls or adjustments or performance of procedures other than those
specified in this manual may result in hazardous radiation exposure. To
prevent exposure to laser beams, do not try to open the enclosure of a CD or
DVD drive.
Power Cord Requirements
The power cord set (wall plug, cable and AC adapter plug) you received with your
computer meets the requirements for use in the country where you purchased your
equipment.
iv Users Manual
Power cord sets for use in other countries must meet the requirements of the country
where you use the computer. For more information on power cord set requirements,
contact your authorized dealer, reseller, or service provider.
General Requirements
The requirements listed below are applicable to all countries:
• The length of the power cord set must be at least 6.00 feet (1.8m) and a
maximum of 9.75 feet (3.0m).
• All power cord sets must be approved by an acceptable accredited agency
responsible for evaluation in the country where the power cord set will be used.
• The power cord set must have a minimum current capacity of 7 A and a
nominal voltage rating of 125 or 250 volts AC, as required by each country’s
power system.
• The appliance coupler must meet the mechanical configuration of an EN 60
320/IEC 320 Standard Sheet C7 connector, for mating with appliance inlet on
the computer.
Important Safety Information v
Regulatory Compliance Statements
Wireless Guidance
Low power, Radio LAN type devices (radio frequency (RF) wireless communication
devices), operating in the 2.4 GHz Band, may be present (embedded) in your notebook
system. The following section is a general overview of considerations while operating
a wireless device.
Additional limitations, cautions, and concerns for specific countries are listed in the
specific country sections (or country group sections). The wireless devices in your
system are only qualified for use in the countries identified by the Radio Approval
Marks on the system rating label. If the country you will be using the wireless device
in, is not listed, please contact your local Radio Approval agency for requirements.
Wireless devices are closely regulated and use may not be allowed.
The power output of the wireless device or devices that may be embedded in your
notebook is well below the RF exposure limits as known at this time. Because the
wireless devices (which may be embedded into your notebook) emit less energy than
is allowed in radio frequency safety standards and recommendations, manufacturer
believes these devices are safe for use. Regardless of the power levels, care should be
taken to minimize human contact during normal operation.
As a general guideline, a separation of 20 cm (8 inches) between the wireless device
and the body, for use of a wireless device near the body (this does not include
extremities) is typical. This device should be used more than 20 cm (8 inches) from the
body when wireless devices are on and transmitting.
This transmitter must not be collocated or operate in conjunction with any other
antenna or transmitter.
Some circumstances require restrictions on wireless devices. Examples of common
restrictions are listed below:
Radio frequency wireless communication can interfere with equipment on
commercial aircraft. Current aviation regulations require wireless devices to be
turned off while traveling in an airplane. 802.11B (also known as wireless
Ethernet or Wifi) and Bluetooth communication devices are examples of
devices that provide wireless communication.
vi Users Manual
In environments where the risk of interference to other devices or services is
harmful or perceived as harmful, the option to use a wireless device may be
restricted or eliminated. Airports, Hospitals, and Oxygen or flammable gas
laden atmospheres are limited examples where use of wireless devices may
be restricted or eliminated. When in environments where you are uncertain of
the sanction to use wireless devices, ask the applicable authority for
authorization prior to use or turning on the wireless device.
Every country has different restrictions on the use of wireless devices. Since
your system is equipped with a wireless device, when traveling between
countries with your system, check with the local Radio Approval authorities
prior to any move or trip for any restrictions on the use of a wireless device in
the destination country.
If your system came equipped with an internal embedded wireless device, do
not operate the wireless device unless all covers and shields are in place and
the system is fully assembled.
Wireless devices are not user serviceable. Do not modify them in any way.
Modification to a wireless device will void the authorization to use it. Please
contact manufacturer for service.
Only use drivers approved for the country in which the device will be used. See
the manufacturer System Restoration Kit, or contact manufacturer Technical
Support for additional information.
Regulatory Compliance Statements vii
United States of America
USA and Canada Safety Requirements and Notices
Do not touch or move antenna while the unit is transmitting or receiving.
Do not hold any component containing the radio such that the antenna is very close or
touching any exposed parts of the body, especially the face or eyes, while transmitting.
Do not operate the radio or attempt to transmit data unless the antenna is connected; if
not, the radio may be damaged.
Use in specific environments:
The use of wireless devices in hazardous locations is limited by the constraints posed
by the safety directors of such environments.
The use of wireless devices on airplanes is governed by the Federal Aviation
Administration (FAA).
The use of wireless devices in hospitals is restricted to the limits set forth by each
hospital.
Antenna use:
In order to comply with FCC RF exposure limits, low gain integrated antennas should
be located at a minimum distance of 20 cm (8 inches) or more from the body of all
persons.
High-gain, wall-mount, or mast-mount antennas are designed to be professionally
installed and should be located at a minimum distance of 30 cm (12 inches) or more
from the body of all persons. Please contact your professional installer, VAR, or
antenna manufacturer for proper installation requirements.
Explosive Device Proximity Warning
Do not operate a portable transmitter (such as a wireless network device) near
unshielded
blasting caps or in an explosive environment unless the device has been
modified to be qualified for such use.
Antenna Warning
To comply with the FCC and ANSI C95.1 RF exposure limits, it is
recommended for Intel® PRO/Wireless Network Connections installed in a
desktop or portable computer, that the antenna for this device be installed
so as to provide a separation distance of al least 20 cm (8 inches) from
all persons and that the antenna must not be co-located or operating
in conjunction with any other antenna or radio transmitter. It is
viii Users Manual
recommended that the user limit exposure time if the antenna is
positioned closer than 20cm (8 inches).
Use On Aircraft Caution
Regulations of the FCC and FAA prohibit airborne operation of radiofrequency wireless devices because their signals could interfere with critical
aircraft instruments.
Other Wireless Devices
Safety Notices for Other Devices in the Wireless Network: Refer to the
documentation supplied with wireless Ethernet adapters or other devices in the
wireless network.
The Part 15 radio device operates on a non-interference basis with other
devices operating at this frequency. Any changes or modification to said
product not expressly approved by Intel could void the user's authority to
operate this device.
Unintentional Emitter per FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:(1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Written by: Daryl L. Osden
This equipment has been tested and found to comply with the limits for a Class
B digital device pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generate uses and can radiate radio
frequency energy and if not installed and used in accordance with the
instructions may cause harmful interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
•
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Regulatory Compliance Statements ix
If necessary, the user should consult the dealer or an experienced radio/television
technician for additional suggestions. The user may find the following booklet helpful:
“Something About Interference.” This is available at FCC local regional offices. Our
company is not responsible for any radio or television interference caused by
unauthorized modifications of this equipment or the substitution or attachment of
connecting cables and equipment other than those specified by our company. The
correction will be the responsibility of the user. Use only shielded data cables with this
system.
Intentional emitter per FCC Part 15
Low power, Radio LAN type devices (radio frequency (RF) wireless communication
devices), operating in the 2.4 GHz Band, may be present (embedded) in your notebook
system. This section is only applicable if these devices are present. Refer to the system
label to verify the presence of wireless devices.
Wireless devices that may be in your system are only qualified for use in the United
States of America if an FCC ID number is on the system label.
The FCC has set a general guideline of 20 cm (8 inches) separation between the device
and the body, for use of a wireless device near the body (this does not include
extremities). This device should be used more than 20 cm (8 inches) from the body
when wireless devices are on. The power output of the wireless device (or devices),
which may be embedded in your notebook, is well below the RF exposure limits as set
by the FCC.
This transmitter must not be collocated or operate in conjunction with any other
antenna or transmitter.
Operation of this device is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation of the device.
Wireless devices are not user serviceable. Do not modify them in any way.
Modification to a wireless device will void the authorization to use it. Contact
manufacturer for service.
FCC Statement for Wireless LAN use:
“While installing and operating this transmitter and antenna combination the
radio frequency exposure limit of 1mW/cm2 may be exceeded at distances
close to the antenna installed. Therefore, the user must maintain a minimum
distance of 20cm from the antenna at all times. This device can not be
colocated with another transmitter and transmitting antenna.”
x Users Manual
FCC Part 68
This equipment compiles with part of the FCC rules. On the back of this equipment is
a label that contains, among other information, the FCC registration number and ringer
equivalence number (REN) for this equipment. If requested, this information must be
provided to the telephone company.
This equipment uses the following USOC jacks : RJ11C
An FCC compliant telephone cord and modular plug is provided with this equipment.
This equipment is designed to be connected to the telephone network or promises
wiring using a compatible modular jack which is Part 68 compliant. See Installation
Instructions for details.
The REN is used to determine the quantity of devices which may be connected to
telephone line. Excessive RENs on the telephone line may result in the devices not
ringing in response to an incoming call. In most, but not all areas, the sum of RENs
should not exceed five (5.0). To be certain of the number of devices that may be
connected to a line, as determined by total RENs, contact the local telephone company
to determine the maximum REN for the calling area.
If the terminal equipment causes harm to the telephone network, the Telephone
Company will notify you in advance that temporary discontinuance of service may be
required. But if advance notice is not practical, the telephone company will notify the
customer as soon as possible. Also, you will be advised of your right to file a complaint
with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations, or
procedures that could affect the operation of the equipment. If this happens, the
telephone company will provide advanced notice in order for you to make necessary
modifications to maintain uninterrupted service.
If trouble is experienced with this equipment (Modem) for repair or warranty
information, please contact your local distributor. If the equipment is causing harm to
the telephone network, the telephone company may request that you disconnect the
equipment until the problem is resolved.
The user must use the accessories and cables supplied by the manufacturer to get
optimum performance from the product.
No repairs may be done by the customer.
This equipment cannot be used on public coin phone service provided by the telephone
company. Connection to party line service is subject to state tariffs.
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to
use a computer or other electronic device, including fax machines, to send any message
unless such message clearly contains in a margin at the top or bottom of each
transmitted page or on the first page of the transmission, the date and time it is sent and
Regulatory Compliance Statements xi
an identification of the business or other entity, or other individual sending the message
and the telephone number of the sending machine or such business, other entity, or
individual. (The telephone number provided may not be any number for which charges
exceed local or long-distance transmission charges.)
In order to program this information into your fax machine, refer to your
communications software user manual.
xii Users Manual
Canada
Unintentional Emitter per ICES-003
This digital apparatus does not exceed the Class B limits for radio noise emissions from
digital apparatus as set out in the radio interference regulations of Industry Canada.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les
limitesapplicables aux appareils numériques de Classe B prescrites dans le règlement
sur le brouillage radioélectrique édicté par Industrie Canada.
Intentional Emitter per RSS 210
Low power, Radio LAN type devices (radio frequency (RF) wireless communication
devices), operating in the 2.4 GHz Band, may be present (embedded) in your notebook
system. This section is only applicable if these devices are present. Refer to the system
label to verify the presence of wireless devices.
Wireless devices that may be in your system are only qualified for use in Canada if an
Industry Canada ID number is on the system label.
As a general guideline, a separation of 20 cm (8 inches) between the wireless device
and the body, for use of a wireless device near the body (this does not include
extremities) is typical. This device should be used more than 20 cm (8 inches) from the
body when wireless devices are on.
The power output of the wireless device (or devices), which may be embedded in your
notebook, is well below the RF exposure limits as set by Industry Canada.
This transmitter must not be collocated or operate in conjunction with any other
antenna or transmitter.
Operation of this device is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation of the device.
To prevent radio interference to licensed service, this device is intended to be
operated indoors and away from windows to provide maximum shielding.
Equipment (or its transmit antenna) that is installed outdoors is subject to
licensing.
Wireless devices are not user serviceable. Do not modify them in any way.
Modification to a wireless device will void the authorization to use it. Contact
manufacturer for service.
Regulatory Compliance Statements xiii
Telecommunications per DOC notice
(for products fitted with an IC-compliant modem)
The Industry Canada label identifies certified equipment. This certification means that
the equipment meets certain telecommunications network protective, operation, and
safety requirements. The Department does not guarantee the equipment will operate to
the users’ satisfaction.
Before installing this equipment, users should make sure that it is permissible to be
connected to the facilities of the local telecommunications company. The equipment
must also be installed using an acceptable method of connection. In some cases, the
inside wiring associated with a single-line individual service may be extended by
means of a certified connector assembly. The customer should be aware that
compliance with the above conditions may not prevent degradation of service in some
situations.
Repairs to certified equipment should be made by an authorized Canadian maintenance
facility designated by the supplier. Any repairs or alterations made by the user to this
equipment, or equipment malfunctions, may give the telecommunications company
cause to request the user to disconnect the equipment.
Users should make sure, for their own protection, that the electrical ground connections
of the power utility, telephone lines, and internal metallic water pipe system, if present,
are connected together. This precaution may be particularly important in rural areas.
To avoid electrical shock or equipment malfunction do not attempt to make
electrical ground connections by yourself. Contact the appropriate inspection
authority or an electrician, as appropriate.
The Ringer Equivalence Number (REN) assigned to each terminal device provides
an indication of the maximum number of terminals allowed to be connected to a
telephone interface. The termination on an interface may consist of any combination of
devices subject only to the requirement that the sum of the Ringer Equivalence
Numbers of all the devices does not exceed 5.
xiv Users Manual
European Union
European Union CE Marking and Compliance Notices
Products intended for sale within the European Union are marked with the Conformité
Européene (CE) Marking, which indicates compliance with the applicable Directives
and European standards and amendments identified below. This equipment also carries
the Class 2 identifier.
The following information is only applicable to systems labeled with the CE mark
.
European Directives
This Information Technology Equipment has been tested and found to comply with the
following European directives:
• EMC Directive 89/336/EEC with amending directives 92/31/EEC & 93/68/
EEC as per
– EN 55022 Class B
– EN 61000-3-2
– EN 61000-3-3
– EN 55024
• Low Voltage Directive (Safety) 73/23/EEC as per EN 60950(A1/A2/A3/A4/
A11)
• Radio and Telecom Terminal Equipment Directive 199/5/EC as per
– CTR21 (if fitted with a modem device)
– ETS 300 328 (if fitted with a 2.4 GHz band embedded wireless device)
– ETS 301 489-1 (if fitted with a 2.4 GHz band embedded wireless device)
– ETS 301 489-17 (if fitted with a 2.4 GHz band embedded wireless device)
European Radio Approval Information
(for products fitted with EU-approved radio devices)
This Product is a Notebook computer; low power, Radio LAN type devices (radio
frequency (RF) wireless communication devices), operating in the 2.4 GHz band, may
be present (embedded) in your notebook system which is intended for home or office
use. This section is only applicable if these devices are present. Refer to the system
label to verify the presence of wireless devices.
Regulatory Compliance Statements xv
Wireless devices that may be in your system are only qualified for use in the European
Union or associated areas if a CE mark
with a Notified Body Registration Number
and the Alert Symbol is on the system label.
The power output of the wireless device or devices that may be embedded in you
notebook is well below the RF exposure limits as set by the European Commission
through the R&TTE directive.
See 802.11b and 802.11g restrictions for specific countries or regions within
countries under the heading “European Economic Area Restrictions” below.
Translated Statements of Compliance
This product follows the provisions of the European Directive 1999/5/EC.
European Economic Area Restrictions
Local Restriction of 802.11b/802.11g Radio Usage
[Note to integrator: The following statements on local restrictions must be published in
all end-user documentation provided with the system or product incorporating the Intel
PRO/Wireless 2200BG Network Connection product.]
Due to the fact that the frequencies used by 802.11b/802.11g wireless LAN
devices may not yet be harmonized in all countries, 802.11b/802.11g products
are designed for use only in specific countries or regions, and are not allowed
to be operated in countries or regions other than those of designated use.
As a user of these products, you are responsible for ensuring that the products
are used only in the countries or regions for which they were intended and for
verifying that they are configured with the correct selection of frequency and
channel for the country or region of use. Any deviation from permissible
settings and restrictions in the country or region of use could be an
infringement of local law and may be punished as such.
The European variant is intended for use throughout the European Economic Area.
However, authorization for use is further restricted in particular countries or regions
within countries, as follows:
General
European standards dictate maximum radiated transmit power of 100 mW effective
isotropic radiated power (EIRP) and the frequency range 2400 – 2483.5 MHz.
Belgium
xvi Users Manual
The product may be used outdoors, but for outdoor transmissions over a distance of
300m or more, a license from the BIPT is required.
This restriction should be indicated in the manual as follows:
Dans le cas d'une utilisation privée, à l'extérieur d'un bâtiment, au-dessus d'un espace
public, aucun enregistrement n'est nécessaire pour une distance de moins de 300m.
Pour une distance supérieure à 300m un enregistrement auprès de l'IBPT est requise.
Pour une utilisation publique à l'extérieur de bâtiments, une licence de l'IBPT est
requise. Pour les enregistrements et licences, veuillez contacter l'IBPT.
France
For Metropolitan departments:
2.400 - 2.4835 GHz for indoor use.
2.400 -2.454 GHz (channels 1 to 7) for outdoor use.
For Guadeloupe, Martinique, St Pierre et Miquelon, Mayotte:
2.400 - 2.4835 GHz for indoor and outdoor use.
For Reunion, Guyane:
2.400 - 2.4835 GHz for indoor use.
2.420 - 2.4835 GHz for outdoor use (channels 5 to 13)
European Telecommunication Information
(for products fitted with EU-approved modems)
Marking by the symbol
indicates compliance of this equipment to the Radio and
Telecom Terminal Equipment Directive 1999/5/EC. Such marking is indicative that
this equipment meets or exceeds the following technical standards:
CTR 21 – Attachment requirements for pan-European approval for connection to the
analogue Public Switched Telephone Networks (PSTNs) of TE (excluding TE
supporting voice telephony services) in which network addressing, if provided, is by
means of Dual Tone Multi-Frequency (DTMF) signaling.
Although this equipment can use either loop disconnect (pulse) or DTMF
(tone) signaling, only the performance of the DTMF signaling is subject to
regulatory requirements for correct operation. It is therefore strongly
recommended that the equipment is set to use DTMF signaling for access to
Regulatory Compliance Statements xvii
public or private emergency services. DTMF signaling also provides faster call
setup.
This equipment has been approved to Council Decision 98/482/EEC—“CTR 21” for
Pan-European single terminal connection to the Public Switched Telephone Network
(PSTN).
However, due to differences between the individual PSTNs provided in different
countries, the approval does not, of itself, give an unconditional assurance of
successful operation on every PSTN termination point. In the event of problems, you
should contact manufacturer Technical Support.
xviii Users Manual
WEEE SYMBOL INFORMATION
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate
collection systems)
This marking shown on the product or its literature, indicates that it should not be
disposed with other household wastes at the end of its working life. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, please
separate this from other types of wastes and recycle it responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product,
or their local government office, for details of where and how they can take this item
for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product should not be mixed with other commercial wastes for
disposal.
WEEE SYMBOL INFORMATION xix
Using Your Documentation
Congratulations on your purchase of a notebook computer with the Windows® XP
operating system. Whether you are new to using a portable computer or are an
experienced user, this user’s manual can help you get the most from your computer.
Manual Documentation Conventions
Information Icons
Three icons and their associated messages appear in this manual. The information
icons are placed before the step/information they apply to:
Warning:
Indicates the possibility of personal injury.
Caution:
Warns you of possible damage to equipment or data.
Note:
Informs you of special circumstances.
Technical Information:
Informs you of special requirements or limitations for use of item(s).
Keyboard Conventions
Keys that you need to press to perform certain functions are displayed in the manual in
brackets. For example:
<Ctrl> indicates the control key (Ctrl on the keyboard).
If you need to press two keys at the same time, the key names are shown joined by a
plus sign. For example:
<Fn+F8> means that you should press the Fn key and hold it and then press the F8
key.
Using Your Documentation 1
CD-ROM Device Naming Convention
In many installation programs you will have to get a program from the CD-ROM
device. The program installation sequence assumes that the CD is drive d:\, however
this is not always the case. The name of the CD-ROM drive is the letter following the
letter assigned to your last HDD. For instance, if you have one HDD with two
partitions, the HDD is drives C: and D: and the CD-ROM drive is then drive E.
Touchpad Conventions
You may be asked to click or double-click on items on the display screen. As a general
note the touchpad actions act much in the same way as a wheel mouse, any differences
are explained fully.
The object that needs to be clicked upon will be displayed in Bold text or shown in a
small figure such as the “Start Button” shown on the right =>.
Table 1. Touchpad Click Conventions
Action
Process
Click
Depress the touchpad left button and release
Double-click
Quickly click the left touchpad button two times
Windows Conventions:
Almost all “Windows” programs will display the name/function of a button or
icon if you place the touchpad pointer on the item you want information about.
Software User Documentation
Your computer is shipped from the factory with several software programs installed.
The software may include its own online or printed documentation. Refer to the
documentation or the Help options in the software for more information.
The figures and illustrations in this manual may not be identical to those on
your system.
General Icon Note:
Some of the Icons used in Windows XP may be placed on the taskbar by
selecting (ex: Place the volume icon in the taskbar) in the properties dialog
box.
2 Users Manual
Getting Started
Introducing Your Computer
Front View
LCD Latch
LCD Panel
AVStation Premium
(p 42)/ AVStation
now (p 56) Button
Status Indicators
(p15)
Power Button
Keyboard (p8)
Speaker(L)
Status Indicators
(p15)
Memory Card Slot
(p31)
Touchpad (p12)
Speaker(R)
Touchpad
Button
Getting Started 3
Right View
CD Drive
(option, p23)
USB Port
(2.0)
Left View
Microphone Headphone Jack
Jack / S/PDIF Jack
Security Lock Port
(p121)
1394 Port
(6 Pin)
Modem Port Fan Vent
(p64)
LAN Port
(p65)
4 Users Manual
PCMCIA Card
Slot (p34)
Back View
USB Port (2.0)
DC Jack
Battery
(p114)
Monitor Port
TV Output
Port(S-Video)
Bottom View
Battery Latches
Memory
Compartment
(p119)
HDD
Compartment
Removing or disassembling the hard disk drive will void your warranty. To
replace the hard disk drive, please contact your nearest Samsung Service
Centre.
Getting Started 5
Turning the Computer On and Off
To turn on the computer
1. Insert the battery and connect the AC adapter according to the Installation Guide.
2. Slide the LCD latch to the right and open the LCD panel.
3. Press the power button.
To turn off the computer
1. Click the start button (
2. Click Turn Off Computer.
3. Click Turn Off.
6 Users Manual
) on the taskbar.
If the computer is not turned off properly due to a system error, press
<Ctrl>+<Alt>+<Delete>. When [Windows Task Manager] dialog box appears,
click Shut Down > Turn Off to turn off the computer. Your unsaved work may
be lost/damaged.
If <Ctrl>+<Alt>+<Delete> keys do not operate either, press the power button
for more than 4 seconds to turn off the computer. Your unsaved work may be
lost/damaged. When you turn on the computer next time, it will perform a disk
checking process.
Getting Started 7
Using the Keyboard
Your computer has an 88-key keyboard. By pressing designated key combinations, you
can have access to all the key functions of a full-sized keyboard.
The keyboard is supplied according to the corresponding country. Refer to the
keyboard figure for the corresponding country.
<United Kingdom>
Function
Key
Windows
Key
Function & Special Purpose Keys
Embedded Numeric Keypad
Application Key
Screen Brightness and
Volume Adjustment /
Direction Keys
Although the layout of the keys on your computer’s keyboard is different from
that on a desktop computer’s keyboard, the keyboard feels like a full-sized
keyboard when you use it.
8 Users Manual
<United States>
Function
Key
Function & Special Purpose Keys
Windows
Key
Embedded Numeric Keypad
Application Key
Screen Brightness and
Volume Adjustment /
Direction Keys
The keys on the keyboard can be grouped into the following categories:
• Full-sized Alphanumeric typewriter keys are arranged like a standard
typewriter keyboard and are used for text entry. The Windows keys on either
side of the spacebar open Windows menus and perform other special functions.
• Function keys, when pressed together with the <Fn> key, enable special
functions.
• Cursor and Screen control keys move the cursor. They may perform other
functions, depending on your software.
To clean the computer keyboard, use slightly damp cotton swabs. Scrub the keys and
the surface around the keys.
Do not allow liquid to drip into the keyboard or you may damage the keyboard.
Getting Started 9
Using the Numeric Keypad
Your keyboard includes a numeric keypad, which is a group of keys that you can set to
type numbers and mathematical symbols, such as the plus sign. A number or symbol
on the corner of each keypad key shows its numeric function.
Num Lock LED
Press <Fn+Num Lock> to turn on the embedded numeric keypad. The numeric
functions of the keypad are enabled and the Num Lock LED turns on. ( ”Reading the
Status Indicators” on page 15 for the location of the Num Lock LED.)
While the numeric functions are enabled, you can temporarily return a key to its normal
function by pressing the key and the <Fn> key. For example to type the letter m, press
<Fn+M>, this operation displays the letter m.
To turn the numeric keypad off, press <Fn+Num Lock> again. The Num Lock LED
turns off.
10 Users Manual
Using Special Function Keys
The function key activates special functions when it is pressed in combination with
another keys.
<Fn> Key
Combinations
Key Name
Key Function
<Esc/
Rest
Puts the computer into suspended mode. To escape suspended mode,
press the power button. (p109).
>
<F2/
>
Gauge
Shows the current power source and the remaining battery charge.
<F4/
>
LCD/CRT
Switches the display between the LCD and external display device
when an external display device is connected. (p107)
<F5/Backlit>
Backlight
Turns the LCD on and off.
<F6/Mute>
Mute
Turns the audio output on and off.
<F7/ SRS>
SRS
This feature enables you to experience more stereophonic sound. You
can select one of the following modes by pressing the button.
Note. WOW XT ON Mode: Select to listen to music.
TruSurround XT ON Mode: Select to watch a movie.
SRS OFF Mode: Switches off the SRS function.
The SRS function is only supported through the built-in speaker of
the computer and the headphones. It is not supported through the S/
PDIF port.
<F8/
>
Wireless LAN
On/Off
Turns the wireless LAN service on and off for models with wireless
LAN installed.
<F9/
>
Touchpad
Turns the touchpad function on and off.
Etiquette Mode
You can select Etiquette Mode when you need a tranquil work
environment.
<F11/Num Lock>
Number Lock
Enables the numeric keypad. (p10)
<F12/Scroll>
Scroll Lock
Scrolls the screen up and down while the cursor position does not
change in some applications.
<
/
>
Volume Down
Decreases the audio volume.
<
/
>
Volume Up
Increases the audio volume.
<
/
>
Brightness Up
Makes the LCD screen brighter.
<
/
>
Brightness Down
Makes the LCD screen dimmer.
<F10/
>
When you press a function key combination, the system sound may be
temporarily muted.
Getting Started 11
Using the Touchpad
In Windows, you always see a small graphical image on the screen that indicates the
location where you can take the next action. This image is called a pointer, and is
usually displayed in arrow shape ( ) or ‘I’ shape ( ).
Touchpad
Touchpad Buttons
The touchpad on your computer allows you to move the pointer on the LCD screen,
just like a mouse that is used with a desktop computer. The touchpad buttons allow you
to take actions with the pointer, such as selecting an item or executing a command.
Locking the touchpad
You can lock the touchpad and use only the keyboard and mouse. To lock the
touchpad function, press the <Fn>+<F9> key combination.
12 Users Manual
You can perform various actions with your touchpad as described below.
d
Action
Function
Process
Move
Move the pointer
Place your finger on the touchpad
and slide your finger to a
destination.
Click
Select an object, open a menu, or
execute a button
Place the pointer over an object,
then press left touchpad button
once.
Or, place the pointer over an
object, then tap the touchpad once
with your finger.
Double-Click
Launch a program or open a file
Place the pointer over an object,
then quickly press left touchpad
button twice.
Or, place the pointer over an
object, then quickly tap the
touchpad twice with your finger.
Right-Click
Display a short cut menu
Place the pointer over an object,
then press right touchpad button
once.
Drag
Move an object, or select an area
or multiple objects
Drag and drop a part to the
required place.
Getting Started 13
Action
Function
Process
Scroll
Display upper/lower/left/right part
of the content within a window
Place your finger on the right edge
or bottom edge of the touchpad
and move vertically or horizontally.
(Applicable to certain programs
only)
Please use the touchpad only with your finger. Using sharp devices may
damage the touchpad.
Operating the touchpad or touchpad button while starting your system may
increase the time required for starting Windows.
14 Users Manual
Reading the Status Indicators
Shows the operating status of the computer.
Num Lock
Turns on when the numeric keypad is activated.
Caps Lock
Turns on when all alphabet characters you type will be in upper case.
Scroll Lock
Turns on when it is set to scroll the screen up and down while the cursor
position does not change in some applications.
Hard disk drive
Blinks when the hard disk drive is in operation.
Wireless LAN
Turns on when wireless LAN function is enabled. (This light does not operate
for the models without wireless LAN.)
Battery
Turned blue - when the battery is fully charged, or when the battery is not
installed.
Turns amber - when the battery is being charged.
Blinks - when the battery is not properly installed.
Power
Turned On - when the computer is turned on.
Blinks - when the computer is in Standby mode.
Getting Started 15
Adjusting LCD Brightness
There are 8 levels of LCD brightness (1: Dimmest ~ 8: Brightest).
To adjust using keyboard
Press <Fn>+< > or <Fn>+< > keys from the keyboard to adjust LCD brightness.
When changed, the current LCD brightness is displayed on the top left corner of the
LCD screen for a few seconds.
Whenever you turn the system on or change the power source the brightness level
changes according to the settings.
• when operating on AC power:
Brightness Level 8
• when operating on battery power: Brightness Level 1
Adjusting the brightness using the Battery Manager
You can adjust the screen brightness using the Battery Manager. (p116)
Maintaining your LCD brightness settings after turning the system off
and on
1. Turn the system on. When the Samsung Logo appears, press the <F2> key
to enter Setup.
2. In the Boot menu, change the Brightness Control Mode option to User
Control.
3. Save the settings and exit Setup.
- When using the Battery Manager, only the screen brightness set in
'Customized Mode' is maintained.
To save the battery charge
When your computer is operating on battery power, adjusting the LCD
brightness level to dimmer diminishes the battery power consumption.
16 Users Manual
Bad pixels in the LCD
The limits of the LCD manufacturing technology allow a maximum of 10
abnormal or bad pixels, which do not affect system performance. This system
may have the same level of abnormal or bad pixels as any other company’s
products.
Maintenance Instructions
When cleaning the LCD panel, use only computer specific cleaners on a soft
cloth, and lightly wipe in one direction.
Getting Started 17
Adjusting the Volume
To adjust using keyboard
Press <Fn>+<
> or <Fn>+<
> from the keyboard.
To adjust using volume adjustment program
Click the Volume icon(
level.
) on the taskbar, and move the Volume slider to a desired
For advanced volume control options, double-click the Volume icon(
the volume level in the volume control program.
When you turn the system on, a booting noise may occur.
18 Users Manual
), and adjust
Introducing Windows
Understanding the Desktop
The desktop is the working area on the computer. It consists of the large workspace and
a taskbar at the bottom.
Shortcut
Icons
Start Menu
Recycle Bin
Language Bar
Start Button
Taskbar
System Tray with Clock
Start Button
Opens the Start menu.
Taskbar
Displays programs that are currently running. Frequently used
icons can be placed here.
Recycle Bin
Deleted files or folders are sent here.
Language Bar
Switches text input language.
Introducing Windows 19
Understanding the Start Menu
The Start menu includes everything that is required to start Windows. From the Start
menu it is possible to run a program, open a file, assign system users with Control
Panel, receive support by clicking Help and Support, and search desired items from the
computer or Internet by clicking Search.
My Computer
Control Panel
Frequently used programs
Help and Support
All Programs
Start Button
My Computer
Displays the contents of the hard disk, the CD-ROM drive, the network
drive(s), and floppy disks. It can also be used to search and open files
and folders.
Control Panel
Enables users to configure settings on the computer.
Help and
Support
Provides on-line help, information on Windows and troubleshooting.
Search
Enables users to search for information in files or the Internet.
Run
Run programs or documents.
20 Users Manual
Understanding a Window
A window is the basic component in working with the computer. The My Computer
window, which is a window for the computer's hard drive, will be used as an example
here to show the basic composition of a window.
Click Start > My Computer.
Folder Icon
Title Bar
Menu Bar
Close Button
Maximize Button
Minimize Button
Quick Task
Window
Folders
Files
Double-click
Shared
Documents or
Local Disk.
You can see files
and folders.
Double-click the hard drive (local disk) to view internal folders and files stored in it. If
the contents do not appear, click Show the contents of this folder.
What is a drive?
A storage device in which files and folders are saved in, and read from.
What is a folder?
A folder is used to group and manage files systematically, and may include
files in sub-folders. It is similar to a bookshelf.
What is a file?
A file is a document or various kinds of material that is generated as a result
of program operation. It is also called data.
To view the entire structure of the drive
Click the Folder icon in the taskbar to view the entire structure. Click again to
return to the Quick Task Window.
Introducing Windows 21
Help and Support Center
Help and Support Center provides references and troubleshooting information
regarding computer use.
Click Start > Help and Support.
Windows XP Tour
You can tour elementary functions provided by Windows XP.
Click Start > Tour Windows XP.
Or click Start > All Programs > Accessories > Tour Windows XP.
Click on the topics to find out about important functions of Windows XP.
22 Users Manual
Using the Computer
Using the CD Drive
You have one of following drives installed in your computer.
DVD-ROM drive
Reads a CD/DVD.
CD-RW/DVD-ROM Combo drive
Reads a CD/DVD and writes a CD.
DVD Super Multi Drive
Reads CD/DVDs and writes data to CD/DVDs. Supported DVD
types include DVD ± R, DVD ± RW and DVD-RAM.
A CD-ROM drive is optional. For more detailed product specifications, refer to
the product catalog.
To insert a CD
1. Press the eject button on right side of the CD drive.
2. When the tray slides out, place a CD onto the tray with the label facing up, and
push the CD down until it clicks.
Emergency Eject Hole
Eject Button
CD Access LED
3. Push the tray in gently until it clicks.
Using the Computer 23
To eject a CD
1. Stop any process that accesses the CD drive and ensure the CD access LED is
turned off.
2. Press the eject button on right side of the CD drive.
3. When the tray slides out, remove the CD from the tray.
4. Push the tray in gently until it clicks.
If you remove the CD when the CD access LED is on, the disk and the data in
it may be damaged.
Emergency Eject Hole
To eject a CD when the CD drive is not working or the computer is turned off,
unfold a paperclip, and insert the unfolded end of the clip into the emergency
eject hole (located next to the eject button) and press until the CD tray opens.
To clean a CD or DVD title
Clean the disc with a soft clean cloth by wiping from the center outwards.
To play a DVD
You have to install the DVD software provided on a separate CD to view a
DVD title.
24 Users Manual
To use the Windows Media Player
Window Media Player enables you to play and manage audio and video files.
To launch the Windows Media Player, click Start > All Programs > Accessories >
Entertainment > Windows Media Player.
Running the program the first time displays the set up screen. Define the settings
according to the instructions displayed on the screen.
When you complete the settings, the following screen appears.
Features
Playlist
Playback Control Area
To view detailed information on how to use Windows Media Player
Run Windows Media Player and right-click over the Function Taskbar and
select Help > Windows Media Player Help.
To play a video CD
If a video CD does not run automatically, follow these steps.
1. Insert a video CD into the CD drive.
2. When the CD drive window appears, double-click the MPEGAV folder.
3. Double-click the .dat file.
4. When the [Caution] dialog appears, click Open With.
5. Select “Select the program from a list” and click OK.
6. Select the Windows Media Player, and click OK. The video starts playing.
Using the Computer 25
Above procedure applies only to the video CDs that has a .dat file as the
execution file. Playing procedure may be different according to video CDs.
To write data on a CD (Option)
If your computer has CD-RW functionality, you can copy data to a blank CD or create
an audio CD.
An additional CD writing program is supplied in an additional CD.
You cannot write to a CD that already has data in it.
1. Insert a blank CD into the CD drive.
2. On the [CD Drive] dialog, select Open Writable CD Folder and click OK. The
CD drive window appears.
3. Click Start > My Computer.
26 Users Manual
4. In My Computer window, select files and folders to copy, then drag and drop them
onto the CD drive window.
My Computer window
CD drive window
4. Drag and drop folders or
files to copy.
5. Click Write these files to CD.
5. Click Write these files to CD in the CD drive window.
6. When the CD Writing Wizard appears, enter the CD label, and click Next. The
data begins copying.
7. When copying is completed, a ‘completed’ message appears and the CD drive
window opens automatically.
For more information on writing CDs
Click Start > Help and Support. Type “CD copy” in the search field, and click
the Search icon (
).
To Burn an Audio CD
Run Windows Media Player and right-click over the Function Taskbar and
select Help > Windows Media Player Help.
Select Using the Player > Using CDs, DVDs and VCDs > Using CDs >
Burning your own CDs > To burn your own CD to see detailed information.
Using the Computer 27
Enjoying Home Theater (S/PDIF Port)
Your computer supports 5.1 channel output, which is a basic function for home theater
systems, and DVD drives. It provides 3D surrounding sound and vivid screen.
What is a home theater system?
Home theater system usually consists of a TV, DVD, 5.1 channel speaker, and
digital amp and provides a high-resolution screen (MPEG2) and 3D
surrounding sound (Dolby 5.1 or DTS). With a home theater system, you can
enjoy a vivid screen and sound in your home as if you are in a movie theater.
The following devices are required to enjoy a home theater system.
5.1 channel speaker system (amplifier, speakers, connection cables)
Purchased separately
DVD drive and DVD playing program on the computer
Optional
DVD title that supports 5.1 channel
Purchased separately
To use home theater system, complete the following procedures:
• Step 1. Connect 5.1 channel speaker system to your computer.
• Step 2. Configure digital sound output on the computer.
• Step 3. Enable S/PDIF output on the DVD program.
28 Users Manual
Step 1. Connect 5.1 channel speaker system to your computer
1. Connect the S/PDIF jack of the system and a 5.1 channel amplifier.
2. Connect speakers to the amplifier. (Refer to speaker’s manual.
3. To view through a TV, connect the TV and change the current display device to
TV in the Display Properties. ( ”Connecting to a TV” on page 103.)
TV
Digital Amplifier
Sub
Woofer
Front Right Speaker
Front Left Speaker
Computer
Center
Speaker
Surround Left Speaker
Surround Right Speaker
Step 2. Configure digital sound output on the computer
1. Click Start > Control Panel > Sounds, Speech and Audio Devices > Sounds
and Audio Devices.
2. In the Device volume field on the Volume tab, click Advanced.
3. In the [Volume Control] dialog, click Option > Advanced Controls. Then
Advanced button is displayed on the bottom of the dialog.
4. Click Advanced, select “1 PCM SPDIF”, then click Close.
Using the Computer 29
Step 3. Enable S/PDIF output on the DVD program
To use 5.1 channel speakers, you need to install the Power DVD program from the
DVD Installation CD provided with your computer, then change the settings as per the
following.
1. Run Power DVD program and click the Settings icon (
).
2. On the Audio tab, set the Audio Output setting to “Use SPDIF” and click OK.
Now, you can enjoy home theater using DVD titles.
To control volume for your 5.1 channel speaker, use the control on the digital
amp. (Please refer to the speaker manual.)
30 Users Manual
Using Memory Card Slot
Using the memory card slots, you can use memory cards (Memory Stick, Memory
Stick Pro, SD Card, MMC and XD Card are supported). You can use a memory card
as a removable disk and use it to transfer data between the computer and a digital
equipment such as a digital camera..
Memory Stick
Memory Stick Pro
SD Card
MMC
XD Card
Restrictions when Using Memory Cards
You can use memory cards for storig data only. Copyright protection function
is not supported.
To insert and use a memory card
Before using the memory card slot, remove the slot protector.
Press the end of the slot protector softly to pop it outward, then remove it.
You should insert the memory card upside down.
Inserting wrong side up may cause damage in the memory card and the
computer.
Using the Computer 31
1. Insert the memory card into the memory card slot.
2. Click Start > My Computer. The inserted memory card is displayed.
Example : Memory Stick
3. You can write data to the memory card. If the memory card is not formatted yet,
format the memory card before use.
Since the memory card may be easily mislaid when moving your computer,
keep the memory card separately.
To remove a memory card
1. Press the end of the memory card softly to pop it outward.
2. Remove the memory card.
32 Users Manual
To format a memory card
You can use a memory card after the format operation. The procedures to format a
memory card are described below.
Since format operation deletes all data in the memory card, please make sure
that there is no important data in the memory card before formatting.
To protect the data in the memory card
Set the write protection tab of the Memory Stick or SD memory card to the
Lock position.
1. Click Start > My computer.
2. Press the right touchpad button on the memory card drive, and select Format from
the pop-up menu.
3. Click Start to start the format operation.
To use a memory card in both the computer and other digital device such as
digital camera, it is recommended to format the memory card in the digital
device. If you format the memory card in the computer, you may have to format
the memory card in other digital device again to use the memory card in the
digital device.
Using the Computer 33
Using the PCMCIA Card Slot
Various different functions can be added by inserting PCMCIA cards into the system.
This system supports 16/32 bit, type I or II PCMCIA card types.
The PCMCIA card slot does not support a ZV card or a PCMCIA III card.
To insert a PCMCIA card
Before using the PCMCIA slot, remove the slot protector.
Push the eject button of the PCMCIA card slot once to pop it out. Push the
button again to eject the slot protector.
1. Insert a PCMCIA card into the PCMCIA card slot on the side of the computer.
Ensure that the PCMCIA card is inserted the correct way, as incorrect insertion
will damage the PCMCIA card slot.
Eject Button
2. Windows automatically installs the necessary driver for the card. If there is no
available driver found by Windows, you have to install the driver using a disk
supplied with the card.
34 Users Manual
To remove a PCMCIA card
1. Double-click Safely Removes Hardware icon (
) on the taskbar.
2. On the [Safely Remove Hardware] dialog box, select the appropriate PCMCIA
card and click Stop.
3. When [Stop a Hardware Device] dialog box appears, click OK.
4. Click Close to close the [Safely Remove Hardware] dialog box.
5. Push eject button of the PCMCIA card slot once, and the button pops out.
6. Push the button again to eject the PCMCIA card.
Using the Computer 35
Using EasyBox
Use EasyBox program to make use of Windows' complicated function easily and
conveniently.
Learn about EasyBox
Double-click the EasyBox( ) icon on the desktop.
(Or select Start > All Programs > Samsung > EasyBox > EasyBox.)
• System: System management features are available, including disk
defragmenter, disk cleanup, computer scheduling and system restore.
• BIOS: In windows-based mode, you can recover the BIOS defaults and change
the boot sequence.
• Desktop: Desktop management features include changing the font size,
executing a magnifier function, the start menu settings and managing the quick
launch icons on the taskbar.
• Security: Here you can configure the security settings supported by Windows
XP SP2. And you can change the configuration of the firewall settings,
Windows automatic updates and blocking pop-ups when connected to the
Internet.
36 Users Manual
• Plus Tip: This is a collection of additional Windows functions that are useful
for system management. (Offering shortcut descriptions of Windows,
configuring network sharing and opening local folder sharing, etc.)
Using EasyBox
Security management function will be used as an example here to show the function of
Easybox
Configuring Firewall
The Windows Firewall prevents unauthorized users from gaining access to your
system via the network or the Internet.
1. Click Start > All Programs > Samsung > EasyBox > EasyBox.
2. Click Security from the top menu bar.
3. Select Windows Firewall Settings from the Security menu on the left.
4. Select a firewall level.
5. Click Apply.
Click the User Setting button for advanced features, including exceptions and
permissions.
Using the Computer 37
Using Samsung Smart Screen
Use Samsung Smart Screen program to arrange desktop icons as desired and manage
them effectively.
1. Click Start > All Programs > Samsung > Samsung Smart Screen.
When you launch Samsung Smart Screen for the first time, a dialog box asking
whether to register the program as a start program or not appears. If you select
OK, the program is automatically launched when you start your computer.
2. Samsung Smart Screen appears. When you run the program for the first time, water
drop image is displayed.
Click a water drop to
open and close the
group.
3. To move an icon, click a water drop to open it, then drag an icon to another water
drop.
To return to Windows desktop
Right-click on Samsung Smart Screen and click Windows desktop. Windows
desktop is displayed.
To return to Samsung Smart Screen, double-click (
) icon on the taskbar.
To change background or skin
Right-click on Samsung Smart Screen and select desired item.
38 Users Manual
Using Samsung Theme
Samsung Theme is a program that enables a user to easily switch a theme (desktop,
logon screen and sound effect).
Double-click the Samsung Theme (
) icon on the desktop.
(Or select Start > All Programs > Samsung > Samsung Theme > Samsung
Theme.)
Close button
Help button
Move the mouse pointer over
Samsung Theme item, then the
Samsung Theme will be displayed
below.
• Samsung Theme: Switches to Samsung Theme (desktop, logon screen and
sound effects on booting).
• Windows XP Theme: Switches to the Windows XP default Theme.
• Back: Restores the theme to its previous status.
Using the Computer 39
Using Samsung Update Plus
Samsung Update Plus is software that examines and updates Samsung software and
drivers installed on your Samsung computer to the latest version. To use Samsung
Update Plus, your computer has to be connected to the Internet.
To Update Samsung Software and Drivers
1. Select Start > All Programs > Samsung > Samsung Update Plus > Samsung
Update Plus.
If this is the first time you are running the program, a window will appear asking
you if you agree to the agreement in the window.
Click Agree to use this software.
2. Click Search for and Install Updates and click the Search for New Updates
button.
3. If there are available software or driver updates for your computer, the available
updates will be listed. Select the required updates from the list and click Install
Update to start the update.
(The update list on the screen may differ depending on the computer model.)
40 Users Manual
Updates that must be installed separately.
If you select Install as an update item that must be installed separately, a
message appears informing you of this. Follow the instruction message to
correctly install it.
Automatic update items display
By default, your computer is configured to automatically search for updates. If
there is a new update available, this is notified in the notification area. Click the
balloon help icon in the notification area. Here you will be able to find the latest
available updates.
To change the automatic update settings, click the Configuration button in
Figure 2 and change the settings.
Samsung Update Plus does not provide updates for additionally installed
software and device drivers.
Using the Computer 41
Using AVStation premium
AVStation premium is provided for some models.
AVStation premium is an integrated multimedia program that allows you to watch
video (pictures, video and movies) and listen to music.
You can start AVStation premium as follows.
• Select Start > All Programs > Samsung > AVStation premium > AVStation
premium.
• Double-click the AVStation premium (
• Click the AVStation premium button.
) icon on the Desktop or Taskbar.
AVStation premium
Button
Using AVStation Premium
AVStation Premium Modes
Standard mode Screen
Play Mode Screen
• Standard Mode : You can use all AVStation premium functions.
42 Users Manual
• Play Mode : This provides an easier-to-use user interface than that of Standard
mode. In this mode, the Edit/Create function and the MOVIE EDITOR menu
are not supported (p 52)
- This Manual mainly describes the procedures for using the Standard mode
of AVStation premium.
- The captured program screen shots in this manual may differ slightly from the
actual software depending on the version of the program.
- For more detailed use procedures, refer to the on-line Help.
AVStation Premium Screen Layout and Menus
Menu Bar
Menu Selection Bar
Category Windowr
Library Window
AVStation Premium Standard mode consists of the following 4 menus.
• MUSIC : Using this menu, you can play music files or audio CDs, copy audio
CDs to the computer as well as burn audio CDs.
• PHOTO : Using this menu, you can view or edit pictures (image), view
pictures through a Slide Show, create an album and burn an album onto a CD.
• MOVIE : Using this menu, you can play a video (movie) file or a DVD/VCD
title.
(You can only play a DVD title after installing Power DVD or a DVD player
program.)
• MOVIE EDITOR : Using this menu, you can edit a movie file.
Using the Computer 43
- To handle multimedia files conveniently, register the multimedia files to the
library. (”Registering a File” (p51))
- To access a file not registered to the library, select File > Open File and select
the file.
Selecting the AVStation Premium Menus
To select a menu, select the required menu from the Menu Selection Bar.
MUSIC
This section describes the procedures to play music files or audio CDs, to copy audio
CDs to the computer as well as burn audio CDs.
Select MUSIC from the Menu Selection Bar.
Playing a Music File
MUSIC Menu
Music Category
Media Play Control
Button
Repeat Button
Track, All Tracks, Random
Library Window
Add Music
1. Double-click Music in the left category pane and double-click on All musics.
2. Double-click the music file that appears at the bottom screen to play it.
- To play multiple music files, select the music files and click on Add. The music
files will be played in the added order.
Playing an Audio CD
1. Insert an audio CD into the CD-ROM drive.
44 Users Manual
2. When the Audio CD window appears, select using Samsung AVStation premium and
click OK. Then the audio CD is played.
- To play an audio CD in the CD-ROM drive, double-click CD from the Category
and double-click on Audio CD when Audio CD appears in the bottom screen.
Audio CD window
Copying an audio CD to the Computer
1. Insert an audio CD into the CD-ROM drive.
2. When the Audio CD window appears, select using Samsung AVStation premium and
click OK.
3. Select a track to be copied to the library and then select Tools > Copy from CD.
- To select multiple tracks, select the tracks while pressing the Shift or Ctrl key on
the keyboard.
Select Copy from CD
Select the tracks to be copied.
4. The selected tracks are copied from the audio CD. When the copy operation is
completed, the Copy Completed message will appear.
The copied tracks are saved in the My Documents > AVStation Premium >
Music > Music From CD folder.
Using the Computer 45
Burning an Audio CD
1. Insert a blank CD into the CD-ROM drive. When the CD Drive window appears,
click Cancel.
2. Select Tools > Burn CD.
Select Burn CD
3. Select Burn Audio CD and click Next.
4. Double-click Music in the left title and double-click All musics.
5. Select music files from the list and click the Add files from my PC to the CD burning
list (
) button to move the selected files to the right Burn Audio CD window.
When you have added all music files, click Next.
6. Select a CD Writer and click on Start. When the Burn CD window appears, click OK
to create the audio CD.
Creating a Playlist
A Playlist is a list of selected music files that has been created by a user so that the
selected files can be played later.
1. Select the music files to be included in the Playlist from the music category and click on
Add.
2. When you have added all the music files you want, click on Save As Playlist.
3. Register a new playlist name, and click OK.
4. When the completion message appears, click OK.
The created Playlist is saved in C:\Program Files\Samsung\AVStation
Premium\My Playlist folder.
Playing a Playlist
1. Click on Load Playlist at the bottom of the Library window
2. Select a Playlist and click OK to start the playback.
46 Users Manual
PHOTO
This section describes the procedures to view pictures (images), to view pictures
through a Slide Show, to edit a picture, to create an album, and to burn an album onto
a CD.
Click on PHOTO in the Menu Selection Bar.
Viewing and Editing a Picture
1. Double-click on Image in the left category pane and double-click on All Images.
2. The image files are displayed in the right Image window. To zoom-in on an image,
double-click the image file.
⊕ MUSIC
You can listen to the
music files in My Playlist
or All musics while
editing an image.
PHOTO Menu
Image Window
Image Category
Library Window
Viewing the Image List
Select View Image List from the menu at the bottom of the zoomed image
screen.
Viewing an Image through the Slide Show or Full Screen
Select Slide Show or Full Screen from the menu at the bottom of the zoomedin on image screen.
To exit SlideShow or Full Screen, press the <Esc> key or right-click and then
select Exit SlideShow or Exit Full Screen.
Editing an Image
1. Select an image to edit and select the Edit Image tab.
Using the Computer 47
2. Edit the image using the Shape/Edit/Effect tool and click on Save or Save
Copy.
Creating an Album
1. Select the Create Album tab.
2. Select an album cover style and click Apply to apply the selected style to the album
cover.
3. Enter the title and contents of the album, insert an image and then click (Move to
next page).
- To insert an image, drag and drop a file from the Category into the Image box.
Create Album Tab
Enter the Title and Contents
of the Album
Drag & Drop an
Image File into the
Image Box.
Move to next page Button
Slide Show Button
Save Button
4. Select an image file from the All images category on the left and drag and drop the
file to the album on the right of the screen. Enter text to be added.
5. When creating an album is complete, click on Save to create the album.
The created album is saved in the My Documents > AVStation Premium > Photo >
Photo Album folder and will be displayed in the Album category.
- To view an album, double-click on Image in the left category pane and double-click
on Album. Click on Slide Show in the Image window to view the images within the
album through the Slide Show.
Burning an Album onto a CD
1. Double-click on the album to be burnt to CD in the left Album category.
2. Insert a blank CD into the CD-RW drive. When the CD Drive window appears, click
on Cancel.
48 Users Manual
3. Select Send > Burn CD from the menu at the bottom of the Album window.
4. Enter the CD title in the Burn a CD window and then click OK to burn a CD with the
album.
MOVIE
This section describes the procedures to play a movie file or a DVD/VCD title.
Click on MOVIE in the Menu Selection Bar
Playing a Movie
1. Double-click on Movie in the left category pane and double-click All movies.
2. Double-click a movie file to play it.
⊕ MUSIC
You can listen to the
music files in My Playlist
or All musics while
working.
MOVIE Menu
Movie Window
Movie Category
Library Window
You can adjust the screen size in the View menu.
Playing a DVD Title
You can only play a DVD title after installing a DVD player program, Power
DVD.
1. Insert a DVD title into the DVD drive.
2. When the Select Work window appears, select using Samsung AVStation
premium and click OK to play the DVD title.
If the DVD does not automatically play or the DVD title is in the DVD drive,
double-click the Title of the DVD in the DVD / VCD category.
Using the Computer 49
Playing a VCD Title
1. Insert a VCD title into the CD drive.
2. Double-click the Title of the VCD in the DVD / VCD category.
Movie Editor (Editing a Movie)
This section describes the procedures for editing a movie.
Click on MOVIE EDITOR in the Menu Selection Bar.
Editing a Movie
The procedures for merging two movie files and for inserting transition effects between
movies are described below.
1. Click on MOVIE EDITOR. A new project will open.
2. Double-click Movie in the left category pane and double-click All movies.
3. Drag and drop a movie file to the Storyboard. When a Storyboard appears in the right
pane, drag and drop another movie file to the Storyboard.
⊕ MUSIC
You can listen to the
music files in My Playlist
or All musics while
working.
MOVIE EDITOR Menu
Work Tab
Movie Category
Storyboard
Background Music
Create Movie
50 Users Manual
• To Enter the Title : Click on Text Box in the Title tab, create a Text Box on the
screen, enter the title and then click Apply. The title is inserted at the beginning
of the Storyboard.
Title Tab
Apply
Applied Title
•
•
Screen Effect : Select an effect from the Effect tab and drag and drop the selected
effect onto the movie in the Storyboard to apply the effect.
Transition : Select a Transition effect from the Transition tab and drag and drop
the selected effect onto the movie in the Storyboard to apply the transition
effect.
Transition Tab
Select a Transition Effect and drag
and drop it onto the position to insert
the effect.
Position of the
Transition Effect
•
Background Music : Click on Music and select a music file to apply the
background music to the movie file.
4. When finishing editing a movie, click on Create Movie and click OK to create the
edited movie as a movie file.
The edited movie is saved in the My Documents > AVStation Premium > Movie >
Edited Movie folder and will be displayed in the My Movie category.
Registering a File
By registering multimedia files to the library, you can easily access and manage them
since they will be appear in the corresponding category of either the Music, Image,
Movie categories on the left-hand side of the screen.
Using the Computer 51
The procedures to register an entire folder to the library will be used as an example
below.
1. Click on Register File at the bottom of the screen.
2. Click on Add by folder, and select the folder to be registered and then click OK.
3. When the registration is completed, click OK.
The registered multimedia folder will be displayed in the music, image, or video
categories of the library.
To play a file not registered to a category, select File > Open File and select
the file.
Using Play Mode
This section describes how to use the Play Mode of AVStation Premium.
To use Play Mode, select Mode > Play Mode in the Standard Mode Menu Bar.
Play Mode Screen Layout
The initial screen of AVStation premium Play Mode has the following layout.
Move Bar
This appears only when
the mouse pointer is over
it.
Exit Program
Minimize Screen
Move to the Initial
Screen of Play
Mode
Switch to Standard
Mode
52 Users Manual
Menu
MUSIC
The procedures to play a music file or an audio CD will be described below.
Double-click MUSIC in the initial screen of Play Mode.
Library Window
Category Window
Repeat Button
Track, All Tracks,
Random
Media Play Control Button
Operation Display Window
Playing a Music File
1. Double-click a category from the left category window
2. Double-click a music file in the right library window. The music will be
played.
Playing an Audio CD
1. Insert an audio CD into the CD-ROM drive. Audio CD will be displayed in
the library window.
To play an audio CD in the CD-ROM drive, double-click on CD in the category.
2. Double-click Audio CD in the library window. The tracks of the CD will be
displayed.
3. Double-click a track to play it.
To Listen to All Tracks
Select Play All Tracks from the Media Play Control button.
PHOTO (Viewing a Picture)
The procedures for viewing pictures (images) and for viewing pictures through the
Slide Show will be described.
1. Double-click on PHOTO in the initial screen of Play Mode.
Using the Computer 53
2. Double-click on All Images in the left category pane, and double-click on an image
file in the library window to zoom-in on the image.
Category Window
Library Window
⊕ MUSIC
You can listen to the
music files in My Playlist
or All musics while
working.
Viewing an Image through the Slide Show or Full Screen
Select Slide Show or Full Screen from the menu at the bottom of the zoomed
image screen.
MOVIE (Playing a Movie)
The procedures to play a movie file or a DVD/VCD title will be described below.
1. Double-click MOVIE in the initial screen of Play Mode.
2. Double-click All movies in the left category pane and double-click a movie file in the
right pane. The movie file will be played.
Category Window
Library Window
⊕ MUSIC
You can listen to the
music files in My Playlist
or All musics while
working.
54 Users Manual
Playing a DVD Title
1. Insert a DVD title into the DVD drive.
2. When the Select Work window appears, select using Samsung AVStation
premium and click OK to play the DVD title.
If the DVD is not automatically played or the DVD title was in the DVD drive,
double-click the Title of the DVD in the DVD / VCD category.
Playing a VCD Title
1. Insert a VCD title into the CD drive.
2. Double-click the Title of the VCD in the DVD / VCD category.
Using the Computer 55
Using AVStation now
AVStation now is provided for some models.
AVStation now is an integrated multimedia program that allows you to watch video
(pictures, video and movies) and listen to music without turning the computer on.
Using AVStation now
How to launch AVStation now and the AVStation features will be described below.
The use procedures of AVStation now are similar to those of Play Mode of
AVStation premium.
AVStation now only supports the player and view functions. To register files to
the library, use the registration function of AVStation premium.
Launching AVStation now
You can only use AVStation now when your computer is turned off or it is in
maximum power saving mode ( ”Using Power Management Options” on page
109)
To launch AVStation now, click the AVStation now button.
AVStation now Button
56 Users Manual
Exiting AVStation now
1. Press the <Esc> key or right-click to move to the start screen of AVStation now.
2.
In the start screen, press the <Esc> key or select Exit.
3. In the Exit window, select Exit.
Booting and using the computer when using AVStation now
Select <Go Window> from the Exit window. Your computer will start.
AVStation now Menus
AVStation now consists of the following 3 menus.
Menu
•
•
MUSIC : Using this menu, you can play a music file or an audio CD.
PHOTO : Using this menu, you can view a picture (image) and view a picture
through the Slide Show.
•
MOVIE : Using this menu, you can play a video (movie) file or a DVD/VCD
title.
Using the Computer 57
Using AVStation now
The procedures for using AVStation now will be described below.
To Move, Select and Run Menus
You can use the keyboard and mouse for AVStation now.
• Moving a Menu or an Item
Press the direction keys on the keyboard or move the mouse to move the
cursor to a menu or item and then click it.
• Selecting or Running a menu or an Item
After you move to a menu or item, press the <Enter> key on the keyboard or
double-click it.
• Returning to the Previous Screen
Press the <Esc> or <Backspace> key on the keyboard, or right-click it.
MUSIC
The procedures for playing a music file or an audio CD will be described below.
1. Select the MUSIC menu and select a category. For example, you can select All
Music.
2. In the Library window, select a music file to be played.
All Music
Music File
Category Pane
Library Pane
Repeat Button
Track, All Tracks,
Random
Media Play Control Button
Media Play Control Button
You can only use the Media Play Control button when a music file is being
played.
58 Users Manual
Playing Multiple Tracks
1. Play a music file.
2. Move the focus to the left Category pane, and select the Play All button.
Playing an Audio CD
1. Insert an audio CD into the CD-ROM drive, and select CD from the Category
pane.
2. In the right Library window, select a track to be played.
PHOTO
The procedures for viewing pictures (images) and for viewing pictures through the
Slide Show will be described below.
1. Select the PHOTO menu and move to the All Photo category.
2. In the Library window, select an image to view.
The selected image will be zoomed in on.
All Photo
Category Pane
Image Files
Library Pane
Media Play Control
Button
⊕ MUSIC
You can listen to the
music files in My Playlist
or All musics while
working.
Viewing an Image through the Slide Show or Full Screen
In the lower menu of the zoomed-in image, select SlideShow or Full Screen.
Using the Computer 59
MOVIE
The procedures for playing a video (movie) file or a DVD/VCD title will be described
below.
1. Select the MOVIE menu and select a category. For example, you can select All
Movies by using the direction keys.
2. Move to a movie file in the Library pane using the right direction key and then press the
<Enter> key.
The selected movie file will be played.
All Movie
Category Pane
Movie Files
Library Pane
Media Play Control
Button
⊕ MUSIC
You can listen to the
music files in My Playlist
or All musics while
working.
Playing a DVD/VCD title
Insert a DVD/VCD title into the DVD-ROM drive and select DVD/VCD from the
Category pane.
After a short while, the DVD/VCD title will be played.
Using the DVD/VCD Play Control Button
To use the Play Control button while playing a DVD/VCD title, press a key or
move the mouse.
60 Users Manual
Tips
• Using the Library (File)
AVStation Now can use the library of AVStation Premium.
To use the library in AVStation Now, register the library in AVStation
Premium. ( ”Registering a File” on page 51)
• HDD Category
You can play unregistered files on the hard disk drive in the HDD category of
each menu.
Notice
• Do not remove the Recovery Solution Program.
Removing the Recovery Solution Program also removes AVStation Now. Once
the program is removed, you cannot reinstall it, therefore take care not to
remove the program.
• You cannot use an additionally created Playlist.
You cannot use an additionally created Playlist other than the Playlist provided
with AVStation premium in AVStation now.
• A move file or a movie title not supported by AVStation Now
To play a movie file or a movie title not supported by AVStation Now, please
use AVStation Premium after booting your computer.
Using the Computer 61
Using Samsung Command Center
Samsung Command Center is a program that enables the easy management of software
provided for a Samsung computer. You can view brief descriptions of some programs
and you can launch the programs directly. Samsung Command Center is always hidden
automatically and it appears when you place the mouse cursor in the right-most
position.
Select Start > All Programs > Samsung > Samsung Command Center > Samsung
Command Center.
The Samsung Command Center screen consists of the following 4 areas.
Clock
SW Group Area
SW List Area
AV Station Area
Samsung Update Plus Area
•
•
62 Users Manual
S/W Group Area : You can classify programs into 5 groups, these being
System, Utility, Network, Support, and Entertainment and manage them.
You can add a file that can be launched directly from the Desktop or Explorer
(Files that have the extension of .cmd, .bat, .pif, .scf, .exe, .com, .lnk, or .scr )
by dragging and dropping them.
S/W List Area : Shows software included in the S/W group.
You can add a file that can be launched directly from the Desktop or Explorer
by dragging and dropping it. Some Samsung software is automatically added or
removed from the list when the software is installed or removed. If you move
the cursor over the software in the list, you can view a brief description and the
Run button to launch.
•
•
AV Station Area : This only appears when the AV Station program has been
installed.
You can easily launch the TV, music, movie or album player of the AV Station
program. Drag and drop a media file from the Desktop or Explorer over any of
the buttons to launch the corresponding player.
Samsung Update Plus Area : When there is new software or a new driver, the
Samsung Update Plus notification window appears.
If you click on the notification window, Samsung update Plus is launched and
an update is performed with a percentage number indicating the progress status.
Using the Computer 63
Connecting to the Internet
Connecting with a Modem
Before Start:
• Prepare a telephone line that is not digital.
• Contact an internet service provider (ISP) for instructions on how to connect to
and disconnect from the Internet.
1. Connect a telephone line to the computer’s modem port.
2. Connect to the Internet according to the instructions provided by your ISP.
If the Internet connection is not disconnected properly, additional telephone
charges may be imposed.
64 Users Manual
Connecting Through a Wired LAN
1. Connect a LAN cable to the computer’s LAN port.
2. Click Start > Control Panel.
3. Click Network and Internet Connections in the [Control Panel] window.
4. Click Network Connections in the [Network and Internet Connections] window.
5. Right-click the Local Area Connection icon and click Properties.
Connecting to the Internet 65
6. On the General tab, select “Internet Protocol(TCP/IP)” and click Properties.
7. To use DHCP:
On the General tab, select “Obtain an IP address automatically” and “Obtain DNS
server address automatically”. Click OK.
To use a static IP:
On the General tab, select “Use the following IP address” and fill in the IP
address, Subnet mask, Default gateway, Preferred DNS server, and Alternative
DNS server fields. Click OK.
To use both DHCP and static IP simultaneously:
On the Alternate Configuration tab, click User configured and fill in the fields.
Click OK.
66 Users Manual
Connecting Through a Wireless LAN (Option)
A wireless network (Wireless LAN) environment is a network environment that
enables communication between multiple computers at home or a small-size office
through wireless LAN devices.
Using the wireless network connections between the systems, you can use normal
network functions such as sharing of files, folders and printers. When a computer-tocomputer network has been constructed, a computer that is not connected to the
Internet can share the Internet by accessing another computer connected to the Internet.
For details, see “Sharing Internet Access” on page 87.
This description in this section refers to the Intel® PRO/Wireless 2200BG
Network Connection (hereafter referred to as an Intel 802.11BG card), Intel®
PRO/ Wireless 2915 Network Connection (hereafter referred to as an Intel
802.11ABG card) and Atheros Wireless Network Adapter (hereafter referred
to as an Atheros 802.11BG card) devices.
A wireless LAN card is optional. The model of the wireless LAN card is
determined by the relevant product.
To view the installed wireless LAN card, click Start > Control Panel >
Performance and Maintenance > System > Hardware tab > Device Manager.
The wireless LAN connection settings will be described on the basis of the
Windows XP Service Pack 2 installed computer.
It is recommended using the default settings provided by Windows XP for the
wireless LAN settings for Windows XP installed computers.
To setup using the software supplied by the wireless LAN card manufacturer,
refer to ”Wireless Network Setup Using the Wireless LAN Setup Program (For
Intel 802.11BG or Intel 802.11ABG cards)” (p76).
To use the wireless network, you have to turn on the wireless LAN function by
using the Wireless LAN On/Off Button. (p 8)
Wireless network connections can be classified into two categories.
1) Access Point (AP)
You can connect to an AP to use the network. This is possible only in an environment
equipped with an AP. For details, see “Connecting to an Access Point (AP)” on page
68.
Connecting to the Internet 67
What is an Access Point (AP)?
An AP is a network device that bridges wired and wireless LANs, and
corresponds to a wireless hub in a wired network. You can connect multiple
wireless LAN installed computers to an AP.
2) Computer-to-computer (ad hoc)
This is also called a peer-to-peer network.
In computer-to-computer wireless networks, you can wirelessly connect 2 or more
computers that have wireless LAN modules. For details, see “Connecting to computerto-computer networks (peer-to-peer or ad hoc)” on page 70.
Connecting to an Access Point (AP)
This section describes how to connect to an AP. You can use the network when you are
connected to an AP.
For more detailed information such as the network key (encryption key), ask
your network administrator.
1. Right-click on the Wireless Network Connection (
select View Available Wireless Networks.
68 Users Manual
) icon on the taskbar, and
2. Select an AP (E.g. Test) to connect to and click Connect.
If there is a configured network key for the AP to connect to, the Enter Network
Key window appears.
Enter the Network Key in the window and then click the Connect button.
When a network key is not defined for a selected AP, click on Link to display
the warning message box. Then click Connect again in the box.
Now when Connected in AP is displayed, and you can access the network.
Checking the connection status
Move the mouse pointer over the Wireless Network Connection (
the taskbar, and the connection status is displayed.
) icon on
Connecting to the Internet 69
Connecting to computer-to-computer networks (peer-to-peer or
ad hoc)
In computer-to-computer wireless networks, you can wirelessly connect 2 or more
computers that have wireless LAN modules. Using this method, a computer that is not
connected to the Internet can share the Internet by accessing another computer
connected to the Internet. (Refer to ”Sharing Internet Access” on page 87.)
You can connect by completing the following steps:
• Step 1. Set up a computer-to-computer network on a computer.
• Step 2. Connect to the configured computer from other computers.
Step 1. Setting up a computer-to-computer network
1. Right-click on the Wireless Network Connection (
select View Available Wireless Networks.
70 Users Manual
) icon on the taskbar, and
2.
Click Change the order of Preferred Networks.
3. On the Wireless Network tab, click Advanced.
4. Clear 'Automatically connect to non-default network' check box, if it is selected.
Select 'Computer-to-computer (ad hoc) networks only', and click Close.
5. In the Wireless Networks tab, click Add.
Connecting to the Internet 71
6. Enter the network name (e.g. samsung), and unselect 'The key is provided for me
automatically'. Enter the encryption key in the Network key field, and click OK.
To prevent a network connection from an unauthorized user, it would be better
to configure a network key (encryption key). A network key consists of 5 ~ 13
alphanumeric characters (e.g. magic), or of 10 ~ 26 hexadecimal numbers (a
hexadecimal number is represented by numbers '0' to '9' or letters 'a' to 'f').
72 Users Manual
7. Check that the configured network name (e.g. samsung) is in the ’Preferred
networks’ item, and click OK.
Now your wireless network setup has been completed.
Step 2. Connecting to the configured computer
1. Right-click on the Wireless Network Connection (
select View Available Wireless Networks.
) icon on the taskbar, and
Connecting to the Internet 73
2. Select the wireless network name (e.g. samsung) specified in ”Connecting to
computer-to-computer networks (peer-to-peer or ad hoc)” on page 70, and click
Connect.
3. Enter a cryptographic key in the network key box and click Connect.
If the network key is not configured in ”Connecting to computer-to-computer
networks (peer-to-peer or ad hoc)” on page 70, just click Connect, without any
keystrokes.
When connected to the wireless network, the system displays Connected in the
selected network of the Network Connection window.
74 Users Manual
Checking the connection status
Move the mouse pointer over the Wireless Network Connection (
the taskbar, and the connection status is displayed.
) icon on
Connecting to the Internet 75
Wireless Network Setup Using the Wireless LAN Setup
Program (For Intel 802.11BG or Intel 802.11ABG cards)
You can use a wireless LAN by using a wireless LAN configuration program (PROSet)
provided separately.
This description is for the Intel 802.11BG and Intel 802.11ABG cards.
For the Atheros 802.11BG card, see page p80.
To use wireless network connection, complete the following procedures.
• Step1. Install the wireless LAN configuration program (PROSet).
• Step2. Configure wireless network settings through the wireless LAN
configuration program.
Step 1. Installing the wireless LAN configuration program (PROSet)
You can install the wireless LAN client administrator program following the
instruction displayed automatically when you insert the system software Media. Insert
the system software Media into the CD-ROM drive, and install the wireless LAN
configuration program.
Step 2. Using the wireless LAN configuration program (PROSet)
Double-click the wireless LAN program (
) icon on the taskbar.
(Or, click Start > All Programs > Intel PROSet Wireless > Intel PROSet Wireless.)
In some languages, some buttons on the window may not be displayed. If this
is the case, resize the window to use the program.
Configure wireless network settings in PROSet following the procedures below.
76 Users Manual
To connect to an Access Point:
To connect to an access point or existing computer-to-computer (Ad Hoc) network,
refer to the following procedures. (To create a new computer-to-computer network,
refer to the following "To create computer-to-computer (Ad Hoc) network" section.)
1. In Available Networks, click on Refresh.
2. Select the name of desired access point or computer-to-computer network to
connect from the searched available networks list, and click Configure.
If your desired network does not appear, click Refresh.
An access point is represented by the (
) icon, and a computer-to-computer
network is represented by the (
) icon. An (
) icon is displayed in front of
an access point or a computer-to-computer network with configured security
settings.
3. Enter Profile Name and click Next.
4. In the Search Security Settings window, the wireless network security search
message will appear. Click Next.
5. Enter the network authentication, data encryption (WEP), encryption level,
key index, and wireless security password configured for the target access point
or computer-to-computer network in the Security Settings window, and click
Next.
The network authentication, data encryption (WEP), key index, and password
of a access point are configured in the access point management program.
For information on the security information, check the security settings of the
access point or ask your wireless network administrator.
To connect to an existing computer-to-computer (Ad Hoc) network, enter the
password configured when creating the computer-to-computer network for the
first time. You do not need to enter network authentication or key index.
Security Settings
- Network authentication: The network authentication option includes Open
System and Shared Key. When you select Open System, no authentication is
Connecting to the Internet 77
applied (however, encryption is supported). When you select Shared Key, a
WEP key is used for authentication. The default setting is Open System.
- Data encryption (WEP): The IEEE 802.11 WEP (Wired Equivalent Privacy)
standard defines two levels of encryption, a 64-bit key (this is sometimes
represented by 40bits) and a 128-bit key.
- Key index: Select the current encryption key index used by the access point
out of 1 to 4.
- To use encryption key: Click Use pass phrase to activate, and enter 5 (for
64-bit) or 13 (for 128-bit) alphanumeric characters (represented by 0-9, a-z, or
A-Z).
6. The Done window appears, click OK.
When a wireless connection to an access point is established, the connection icon (
appears in front of the name of the connected profile.
)
To create a computer-to-computer (Ad Hoc) network:
To create a new computer-to-computer (Ad Hoc) network or to connect to a hidden
access point (Stealth/Closed Mode), refer to the following procedures.
A hidden access point is an access point that exists, but is configured not to
be detected by the scan operation to prevent access attempts from
unauthorized users.
1. In Profiles, click on Add.
2. Enter Profile Name and Network name (SSID), select Operating Mode, then
click Next.
What is a network name (SSID)?
Network name (SSID) is a name that a wireless adapter uses for identifying
connection. Enter the name of computer-to-computer network to create (e.g.,
samsung) or the name of access point to connect. The network name
identifies cases. (capital and lowercase) For the name of access point, check
the settings of the access point, or ask your wireless network administrator.
Operating Mode:
- Network (Infrastructure) - Connect to an Access Point : Select to
connect to an access point.
- Device to device (Ad hoc) - Connect directly to other computers : Select
to create a computer-to-computer (Ad Hoc) network.
78 Users Manual
3. Configure password setting to be used for computer-to-computer network
connection in the Security Settings window.
To connect to an access point, enter the network authentication, data encryption
(WEP), encryption level, key index, and wireless security password configured
in the access point.
It is recommended to configure data encryption for security purposes when
creating a computer-to-computer network connection profile. For more
information on security settings refer to the security settings in Connecting to
AP or Help.
When you are creating a computer-to-computer network connection profile,
the network authentication setting is disabled.
4. When a profile creation is completed, the new created profile appears in the
profiles list. Select corresponding profile, and click Connect to connect to the
created profile.
When a wireless connection to the created profile is established, the connection
icon ( ) appears in front of the name of the connected profile.
Connecting to the Internet 79
Wireless Network Setup Using the Wireless LAN Setup
Program (for Atheros 802.11BG Card)
You can use a wireless network by using a wireless LAN configuration program
(Atheros Client Utility) provided separately.
This description is for the Atheros 802.11BG card.
For Intel 802.11BG, Intel 802.11ABG cards, see page p76.
To use wireless network connection, complete the following procedures.
• Step 1. Install the Atheros Client Utility program.
• Step 2. Construct a wireless network.
To construct a small office wireless network (peer-to-peer) with two
computers, you have to setup the two computers identically according to the
following procedures.
Step 1. Installing the Atheros Client Utility Program
Install the Atheros Client Utility program included on the System Software CD-ROM
onto the computers to be connected to the network.
Step 2. Using the Atheros Client Utility
Right-click the wireless LAN program (
Atheros Client Utility.
) icon of the Taskbar and select Open
(or select Start > All Programs > IEEE 802.11 WIRELESS LAN > Atheros Client
Utility)
• To Connect to an Access Point
To connect to an access point or existing computer-to-computer (Ad Hoc) network,
refer to the following procedures. (To create a new computer-to-computer network,
refer to the following "To create computer-to-computer (Ad Hoc) network" section.)
80 Users Manual
1. In the Profile Management tab, click on Scan to search for available wireless
networks.
2. Double-click or select the name of an access point (or a new computer-tocomputer network) in the Network Name (SSID) field and click on Enable.
If the network does not appear, click on Refresh.
An access point is represented by the (
) icon, and a small office wireless
network is represented by the (
) icon.
3. Enter a profile name to be used in the Network Connections.
4. Select one of the Security Settings set for the access point (or computer-tocomputer network) to connect to in the Security window. Click on the Settings to
set detailed security options for the selected Security Setting.
The network authentication, encryption type and password of the access point
are set through the access point management program. For security
information, view the access point security settings or ask your wireless
network administrator.
WEP Key Setting:
Data Encryption: IEEE 802.11 WEP (Wired Equivalent Privacy) standard
provides 2 security levels: 64-bit key (sometimes 40-bit) and 128-bit key
encryption.
Key types include hexadecimal numbers and ASCII characters.
For ASCII: Click Use Encryption to enable the encryption feature.
Enter 5 (for 64-bit) or 13 alphanumeric (0-9, a-z ~ A-Z) characters (for 128-bit).
For hexadecimal: Enter 10 (for 64-bit) or 26 hexadecimal (0-9, A-F) characters
(for 128-bit) in the WEP key field.
A computer-to-computer network only supports WEP keys.
In addition, you can set a 152-bit key (32 characters for hexadecimal and 16
characters for ASCII) for the connection to an Atheros Access Point.
5. Click the OK button and then click the OK button in the Profile Management
window.
6. When a new profile is created, the profile appears in the list of the Profile
Management tab and the connection to the corresponding profile starts.
Connecting to the Internet 81
• To create a computer-to-computer (Ad Hoc) network:
To create a new computer-to-computer (Ad Hoc) or to connect to a hidden access point
(Stealth/Closed Mode), refer to the following procedures.
A hidden access point is an access point that exists, but is configured not to
be detected by the scan operation to prevent access attempts from
unauthorized users.
1. In the Profile Management window, click on Create.
2. Enter a profile name in the Profile Name field.
3. Enter a network name to be connected with SSID1.
What is a Network Name?
Network name is a name that a wireless adapter uses for identifying
connection. Enter the name of computer-to-computer network to create (e.g.,
samsung) or the name of access point to connect. The network name
identifies cases. (capital and lowercase) For the name of access point, check
the settings of the access point, or ask your wireless network administrator.
4. In the Security window, select either that the WEP Key to be used for the
computer-to-computer is to be created or Do Not Use.
To connect to an access point, select one of the Security Settings set for the access
point.
5. Set the network type in the Advanced window.
Network Mode:
Ad Hoc – Select to connect to a computer-to-computer (Ad Hoc)
Infrastructure – Select to connect to an access point
6. When a new profile is created, the profile appears in the list of the Profile
Management tab and the connection to the corresponding profile is started.
82 Users Manual
Using Samsung Network Manager
Samsung Network Manager is a program that has been developed to enable users to use
the network easily.
Samsung Network Manager provides the following features.
• You can easily set up the network and printer settings.
• You can immediately use the network without defining new network
settings again fter moving locations.
By setting the network settings (IP address, printer settings, etc.) for each
location, you can immediately access the network without following network
setting procedures each time regardless of your location.
• You can easily share Internet Access.
You can share your Internet connection by setting up a computer with 2 LAN
interfaces (wired and wireless, or 2 wired LAN) as the sharing server. Then,
you can access the Internet on a sharing client by connecting to the sharing
server.
• You can diagnose the network status.
You can diagnose the network status when the network is not properly
connected.
Using the Network
This section describes the procedures to connect to the Internet by setting up a network.
The setting up procedures include the procedures to add a printer to the network.
The setting up procedures are different for wired and wireless LAN
connections.
To use a wireless LAN, there should be a wireless LAN AP available nearby.
Setting Up a Network
1. To use a wired LAN, connect the LAN cable to the LAN port.
To use a wireless LAN, press the <Fn> and <F8> key combination simultaneously
to enable a wireless LAN. When the wireless LAN is enabled, the Wireless LAN
Operation LED ( ) lights up.
Connecting to the Internet 83
2. Run Samsung Network Manager.
Select Start > All Programs > Samsung > Samsung Network Manager >
Samsung Network Manager or double click the Samsung Network
Manager( ) icon on the Desktop.
3. Click the Add button.
4. Select a network location icon and enter the name of the location (e.g. Home).
Click the Next button.
5.
Select Internet direct connection and click the Next button.
6. Select the LAN device, setup the IP address and click the Next button.
Select Device
Setup IP Address
Select Device
Select a device to be connected to the Internet. Select either Wired LAN or
Wireless LAN.
84 Users Manual
Setting up the IP Address
To allocate an IP address automatically (DHCP), select Get IP Automatically.
To use a static IP address, unselect Get IP Automatically and enter an IP
address. For IP address information, ask your network administrator.
7. The Setup Printer window appears.
To add a printer, click Add Printer. The Add Printer Wizard appears. Set up the
printer according to the instructions displayed on the screen.
When the printer has been added, click the Show printer button, select the newly
added printer and then click the Finish button.
To not add a printer, select No Default Printer and then click the Finish
button.
When the network setting is complete, the ’Do you want to move to newly
added location now?’ message appears. If you select ’Yes’, the network
settings for the added location are applied.
When the network settings for the added location are applied, the added place
and the corresponding network connection information is displayed in The
detailed Information for window.
When the network setting is complete, an icon for the added location is created within
the Saved Locations window. Now you can use the Internet or add a new network
location.
Menu
Current Place
Information
Saved Locations
Connecting to the Internet 85
Wireless LAN AP Connection Procedures
To use a wireless LAN, first connect to a wireless LAN AP and then you can
access the network even when moving location. Or moving location and then
you can access the network even when connecting to a wireless LAN AP
1. Right-click over the Wireless Network Connection (
Taskbar and click View Available Wireless Networks.
) icon on the
2. Click Search AP from the Wireless menu to search for wireless LAN APs.
Select an available wireless network (e.g. SAMSUNG) and click the Connect
button. For information on available wireless LAN APs, ask your network
administrator.
Available AP
Connect
3. The network key (security key) input window appears.
- If a network key has been set for the wireless LAN AP, enter the network key
and click the Connect button. For the network key information, ask your
network administrator.
- If no network key has been set for the wireless LAN AP, click the Connect
button without entering the network key.
4. When the computer is connected to the wireless LAN AP, the Connected
message will appear on the Wireless Network icon in the Taskbar.
Using the network after moving location
By setting the network settings (IP address, printer setting, etc.) for each location, you
can immediately access the network without performing the network setting
procedures regardless of your location.
1. Run Samsung Network Manager when connected to the Internet.
86 Users Manual
2. Select an icon that represents the corresponding location from the Saved Locations
window and then click Move.
3. When the network settings of the selected location are applied, the new location
and the network connection information are displayed in The detailed
Information for window.
Sharing Internet Access
This section describes the procedures to share Internet Access.
To share Internet Access, you first have to set a sharing server and a sharing client.
When the setup is complete, you can access the Internet from the sharing client by
connecting to the sharing server.
Sharing Server: A computer with 2 LAN interfaces that provide a function to
share Internet Access.
Sharing Client : A computer that uses the Internet by connecting to a sharing
server without itself having a direct connection to the Internet.
You can connect a sharing server and a sharing client as follows.
Sharing Server
Sharing Client
External Internet Device
Client Device
Connection 1
Wired LAN
Wireless LAN
Connection 2
Wireless LAN
Wired LAN
device that is the same as the
Connection 3
Wired LAN
Wired LAN
client device of the sharing server.
Connect a sharing client with the
To connect a sharing server and a sharing client using a wired LAN, connect
the computers with a LAN cable first.
To connect through a wireless LAN, press the <Fn> and <F8> key
combination simultaneously to enable the wireless LAN. When the wireless
LAN is enabled, the Wireless LAN Operation LED (
) lights up.
You cannot connect to the network by directly connecting to a wireless LAN
AP when sharing the Internet.
To connect the network by connecting to a wireless LAN AP, first cancel
Internet Sharing and then move to a location where a direct connection to the
Internet is available.
Connecting to the Internet 87
As an example, Internet sharing procedures for [Connection 1], which connect the
sharing server and the Internet through a wired LAN and connect the sharing server and
the sharing client through a wireless LAN, are described below.
Setting Up a Sharing Server
1. Run Samsung Network Manager on the computer to be used as the sharing
server.
2. Click the Add button.
3. Select a network location icon and enter the name of the location (e.g. Home).
Click the Next button.
4. Select Internet direct Connection for sharing and click the Next button.
5. Set up the network device to be connected to the external Internet. Determine
whether to use a firewall and select a network device to be connected to the
external Internet (e.g. Wired LAN). Set the IP address and then click the Next
button.
Determine whether
to use a firewall
Select a device
Set an IP address
- To protect against external intrusion attempts, using a firewall is
recommended.
- For more information on selecting a device and setting the IP address, refer
to the description of item 6 of ”Setting Up a Network” on page 83.
88 Users Manual
6. Select a network device to connect to the sharing client (e.g. wireless LAN) and
click the Next button.
To Share Internet Access through a Wireless LAN
- In the Select Device field, select Wireless.
- In the Wireless Connection Name (e.g. Samsung) field, enter the network
name.
- To use the network key (security key), select the "Use Password ,,," option
and enter a network key. Remember the network key because you have to reenter the key on the sharing client to connect to the sharing server.
7. The setup information is displayed. Confirm the settings and click the Next button.
8. The Setup Printer window appears. When the Add Printer wizard appears, set up
the printer according to the instructions on the screen. For more detailed
information, refer to the description of item 7 of ”Setting Up a Network” on page
83
9. When setting up the printer is complete, click the Finish button.
Since the sharing server setting is complete, you can now setup the sharing client.
Setting Up the Sharing Client
1. Run Samsung Network Manager on the computer to be used as a sharing client.
2. Click the Add button.
3. Select a network location icon and enter the name of the location. Click the Next
button.
4. Select Internet Sharing and click the Next button.
- To connect through a wireless LAN, select Internet Sharing - Wireless.
- To connect through a wired LAN, select Internet Sharing - Wired.
5. Confirm the network device to be connected to the server and click the Next
button.
- To connect through a wireless LAN, enter the wireless connection name
(e.g. Samsung) you entered in the sharing server. If you have set a network
key (security key) for the sharing server, enter the network key.
6. The setup information appears. Confirm the information and click the Next button.
Connecting to the Internet 89
7. The Printer Setup window appears. Set up the printer according to the instructions
on the screen when the Add Printer wizard appears. For more detailed information,
refer to the description of item number 7 of ”Setting Up a Network” on page 83.
8. When finishing setting up the printer, click the Finish button.
Since setting up the sharing client is complete, you can access the Internet on the
sharing client through the Internet Sharing function.
- To access the Internet from the sharing client, the sharing server has to be
on.
- To use the Internet on the sharing client, select a sharing client icon from the
Location List window and then click the Move button.
- If the connection is broken while using the Internet on the sharing client, click
the Ap Active from the Wireless menu to reestablish the connection.
Network Status Diagnosis
You can diagnose the network status when the network is not properly connected.
1. Run Samsung Network Manager.
2. Select Auto Diagnosis from the Manage menu.
3. The Network Connections figure window appears. Click the Start button to start
the network diagnosis.
4. When the diagnosis is complete, out of order devices are marked by the
exclamation mark icon. For detailed device status, read the description in the lower
part of the window.
Reconnect and set up the device according to the diagnosis result.
90 Users Manual
Using Network Services
While the computer is connected to the network, you can use network services to share
files, folders, and printers.
Network services are provided for the computers that are connected to the
network through wired or wireless network connections. For details, see
“Connecting Through a Wired LAN” on page 65 and see “Connecting Through
a Wireless LAN (Option)” on page 67.
Sharing files or folders
This section describes how to share files and folders between computers connected to
the network.
To share files, complete the following procedures:
• Step 1. Configuring the sharing of files and folders on a computer.
• Step 2. Accessing shared files and folders from another computer.
When a file or folder is shared, anyone connected to the network can open and
delete the shared file or folder.
Configure a file sharing network only when the network is secure, and do not
share important data.
Connecting to the Internet 91
Step 1. Configuring Sharing
1. Right-click the target file or folder to share in My Computer, and select Sharing
and Security.
2. Click 'IF you understand the security risks but want to share files without running
the wizard, click here'.
It has the same security effect as that of the 'Network Setup Wizard'.
This screen does not appear if Internet Sharing Network Wizard has been
installed in the computer-to-computer wireless network environment.
3. Select 'Just enable file sharing', and click OK.
4. In the 'Network sharing and security' field, select 'Share this folder on the network',
enter the share name, and click OK.
Be cautious when selecting 'Allow network users to change my files' since
other network users can change the files in the shared folder.
The file and folder sharing configuration has been completed.
92 Users Manual
Step 2. Using Shared Files or Folders
This section describes how to access shared files or folders if your computer is a
member of the same workgroup.
1. Double-Click My Network Places of desktop under Other Places.
2. Click 'View workgroup computers', and click the desired computer to access the
shared file.
If your computer is a member of another workgroup:
1. Click Other Places > Microsoft Windows Network.
2. Click the desired workgroup.
3. Click the desired computer to display the shared files or folders.
Sharing Printers
This section describes how to share a printer between computers connected to a
network.
To share a printer, complete the following procedures:
• Step 1. Configure printer sharing in the computer connected to the printer.
• Step 2. Add and use the shared printer in other computers on the network.
Connecting to the Internet 93
Step 1. Configuring Printer Sharing
1. From the computer connected to the printer, click Start > Printers and Faxes.
2. Right-click the printer you want to share, and click Sharing.
3. Select 'Share this printer', enter a share name for the shared printer, and click OK.
4. In the Printers and Faxes window, you will find the printer icon has been changed
to another icon on a hand.
Step 2. Adding and Using a Shared Printer.
1. From a different computer that wants to use the shared printer, click Start >
Printers and Faxes.
2. Click Add a printer.
3. In the Add Printer Wizard, click Next.
4. Select 'A network printer, or a printer attached to another computer', and click
Next.
94 Users Manual
5. Select 'Browse for a printer', and click Next.
6. Select the workgroup or computer, select the desired printer, and click Next.
If you cannot find the desired printer, try again after a while.
7. Read the warning about a shared printer, and click Yes to install the shared printer.
8. Select Yes for 'Do you want to use this printer as a default printer?', and click Next.
9. Click Finish.
10. When the printer sharing configuration has been completed, the shared printer
appears in the Printers and Faxes window.
Now you can print using the shared printer even if your computer is not directly
connected to a printer.
Connecting to the Internet 95
Customizing Your Computer
Using System Setup
The System Setup (BIOS) program enables you to configure your computer hardware
and set security and power-savings options. The settings you choose are stored in
battery-maintained CMOS memory that saves the information even when the
computer’s power is turned off. When your computer is turned back on, it is configured
with the values found in this memory.
Run System Setup if you get a message prompting you to run the program. You may
also want to run System Setup, particularly the first time you use your computer, to set
the time and date, use security or power-management features, or alter the settings of
other features.
BIOS Caution:
If you are not familiar with BIOS setup and what the parameters mean, seek
help from a person who is knowledgeable. Incorrect settings may cause your
system to malfunction or "Crash”.
Your computer’s version of System Setup may not include all the fields listed
here or may include additional fields. Field names and order of appearance
can vary according to the version of the BIOS (basic input/output system) on
your computer.
96 Users Manual
Starting System Setup
To start System Setup, turn on your computer and then press <F2> and hold until the
System Setup screen appears.
Table 2. System Setup Menus
Menu
Function
Main
Changes the basic system.
Advanced
Configures advanced features on your computer.
Security
Enables security features, including passwords.
Boot
Specifies the order of boot devices and configures boot
features.
Exit
Specifies how to exit System Setup.
To open the menu you need to use, use the left or right arrow keys to select the menu
name.
Table 3. System Setup Navigation Keys
Navigation Key
Function
<F1>
Displays the General Help window.
<Esc>
Exits the current menu.
<
> or <
>
Moves the cursor up and down between fields.
<
> or <
>
Selects different menus. Pressing the <Esc>key at the Main
menu brings you to the Exit menu.
<F5>
Scrolls backwards through the options for the highlighted field.
<F6>
Scrolls forward through the options for the highlighted field.
<F9>
Sets the parameters for the current menu to their default values.
<F10>
Save changes and exit system setup.
<Enter>
Executes commands or opens a submenu.
Customizing Your Computer 97
Changing Booting Priority
You can select the booting priority among the devices such as the hard drive, CD-ROM
drive, etc. The following example describes how to configure the hard drive as the first
booting device when the CD-ROM drive is configured as the first booting device by
default.
1. Select the Boot menu in System Setup.
2. Press <Enter> on Boot Device Priority item.
3. Use < > key to move to the Hard Drive item, and press <F6> until it is at the
very top.
4. Press <F10> to save the changed configuration, and exit System Setup.
Now you can boot the system with the hard disk drive as the first booting device.
98 Users Manual
Configuring the Password
Setting the Supervisor Password
By configuring a supervisor password, you can restrict system access to authorized
users only.
Do not lose or forget your password. If you have forgotten your password,
contact the Samsung service center.
1. Select the Security menu in the System Setup. To enter System Setup, see “Starting
System Setup” on page 97.
2. On the Set Supervisor Password item, press <Enter>.
3. Enter a password, press <Enter>, re-enter the password for confirmation, and
press <Enter> again.
4. When a message confirming the password configuration appears in the [Setup
Notice] window, press <Enter>.
Setting the User Password
You can configure user passwords so that other users can use the system.
Before configuring a user password, a supervisor password must have been
configured.
Users can start the system with their user password, but cannot enter into the
System Setup.
Deactivating the supervisor password also deactivates the user password.
On the Set User Password item, press <Enter>, and complete step 3-4 of "Setting the
Supervisor Password".
Customizing Your Computer 99
Activating the Booting Password
Before activating the booting password, the supervisor password must have
been configured.
Set the Password on boot option to [Enabled].
From now on, system booting will not proceed without the password.
Deactivating the Password
1. On the password to delete, press <Enter>. (e.g. supervisor password)
2. Enter the current configured password, and press <Enter>.
3. Leave the 'Enter New Password' and 'Confirm New Password' field empty, and
press <Enter> to deactivate the password.
100 Users Manual
Configuring Resolution and Color Depth
Screen resolution is the number of pixels displayed on the screen. High resolution
makes the overall screen area large, although individual items appear small. Color
quality is determined by the number of bits used to represent a pixel on the screen. High
color quality displays more number of colours on your screen.
1. Select Start > Control Panel > Appearance and Themes > Change the screen
resolution.
2. Make changes on the Settings tab of the [Display Properties] dialog box.
You can view the graphics
chipset.
To change your screen
resolution, move the slider
to select an appropriate
resolution.
To change the number of
colors displayed on a
monitor, select an
appropriate colour quality.
The the Graphics Chipset
Either the ATI or Intel graphics chipset is installed.
You can view the installed graphics chipset in the Display Properties window.
- ATI Graphics Chipset: ATI MOBILITY RADEON X300/X600/X700 Chipset
- Intel Graphics Chipset: Mobile Intel(R) 915GM Chipset or Mobile Intel(R)
910GML Chipset
3. When you have completed configuration, click Apply.
Customizing Your Computer 101
For 15.4" WXGA models, configuring the screen resolution to 1280x800, and
the colour quality to Highest (32 bit) is recommended.
For 15.4" WSXGA+ models, configuring the screen resolution to 1680x1050,
and the colour quality to Highest (32 bit) is recommended.
102 Users Manual
Using External Display Devices(ATI Chipset model, (p
101))
Using external display devices such as monitors, projectors, TVs, etc allows you to
view screen images alternatively or simultaneously on each device. Additionally, you
can extend the screen onto two display devices to use a larger workspace. Using
external display devices is especially useful when you are giving a presentation or
watching a movie through your TV.
Switching Display Devices Using the Shortcut Key
You can watch the screen through either the LCD or an external display device, or you
can even watch the screen through both the LCD and an external display device
simultaneously.
1. Connect the external display device (e.g. a monitor or a projector) to the
corresponding port of the system. To connect a TV, connect the TV to the TV
output port of the system.
Connecting to a TV
To connect to a TV, connect the TV-Out port of the system and the S-Video
port of the TV with the S-Video cable. (The cable is not included and needs to
be purchased additionally.)
Connect to a DTV
To connect to a DTV, connect the TV-Out port of the system and the
Component port of the TV output using the Dongle cable and the Component
cable (the Dongle cable is not included and needs to be purchased
additionally).
Connect the Dongle cable to the TV-Out port of the system and the
Component cable.
Dongle cable - The Dongle cable is not
included and needs to be purchased
additionally.
You have to connect the cable and change the settings as follows.
Customizing Your Computer 103
1. Click Start > Control Panel > Appearance and Themes > Display
2. Click the Settings tab > Advanced
3. Click the Display tab.
4. Select YPbPr On/Off.
YPbPr On/Off
YPbPr
5. Click Apply.
6. The confirmation window appears. Click Yes.
7. Click YPbPr.
8. Select the appropriate TV type in the YPbPr Properties window and Click
Apply.
2. Press the <Fn>+<F4/
> keys. Provided that an external display device is
connected, the display option changes in LCD > CRT > LCD+CRT order
whenever the <Fn>+<F4/
> keys are pressed.
Provided that multiple external display devices are connected, the display
order is LCD > CRT > TV > LCD+CRT > LCD+TV > LCD whenever the
<Fn>+<F4 /
> keys are pressed.
In the DOS environment, the screen is output to LCD and CRT in this
sequence. The TV function is not supported. In full screen DOS mode of
Windows, you cannot use the hot keys.
104 Users Manual
Using Dual View to View Extended Screen
You can expand the screen into two display devices and work conveniently in separate
workspaces.
In Dual View mode, you can select the screen resolution and colour quality for each
display device, as if there were two separate graphics cards.
1. Connect the external display device (e.g. a monitor or a projector) to the
corresponding port of the system. To connect a TV, connect the TV to the TV
output port of the system.(”Connecting to a TV” (p103))
2. Press touchpad right button on the desktop, click Properties, and then click the
Settings tab.
3. Click the monitor '2' icon, select the 'Extend my Windows desktop onto this
monitor' check box, and then click Apply.
4. When the configuration is complete, click Identify on the left side of
Troubleshoot. The primary display device(the LCD) is indicated as '1', and the
Customizing Your Computer 105
secondary display device is indicated as '2'. Now you can view the screen through
two monitors.
1 : Primary
2 : Secondary
When you use Dual View, configuring the LCD as the 'Primary' monitor is
recommended.
If the screen of the secondary display device is displayed at 640x480 pixels,
with 256 colours, change the settings to the desired screen resolution and
colour quality in the [Display Properties] dialog box.
Deactivating Dual View Mode
Click the monitor '2' icon, clear the 'Extend my Windows desktop onto this monitor'
check box, and then click Apply.
To move a window between display devices in Dual View mode
Click the title bar of the window in the primary display device (1, the LCD), and
drag it to the secondary display device (2). The window is moved to the
secondary display device.
106 Users Manual
Using External Display Devices(Intel Chipset mode, (p
101))
Using external display devices such as monitor or projector, you can view the screen
images alternatively or simultaneously. You can extend the screen into two display
devices to use larger workspace.
Using external display devices would be especially useful when you are giving
presentations or watching a video file.
The 910GML Chipset model does not support HDTV output.
1. Connect the external display device (e.g. a monitor or a projector) to the
corresponding port of the system. To connect a TV, connect the TV to the TV
output port of the system.(”Connecting to a TV” (p103))
2. Right-click on the desktop, and select Graphics Properties.
3. On the Display Devices tab, select your desired display device, and click OK.
(The displayed device list is determined by the currently connected devices.)
Customizing Your Computer 107
Monitor
Displays on an external device such as monitor or a projector.
Television
You can only view the screen on the TV.
Notebook
Displays on the notebook LCD only.
Intel(R) Dual
Display Clone
Displays the same screen on the notebook LCD, and an external device such as
monitor or projector.
Extended
Desktop
Extends the screen into the notebook LCD and an external device such as monitor or
projector to use a 2 times larger workerspace.
To switch display devices using shortcut key
You can switch display devices easily by pressing <Fn>+<F4/
key.
> shortcut
Provided that multiple external display devices are connected, the display
order is LCD > CRT > TV > LCD+CRT > LCD+TV > LCD whenever the
<Fn>+<F4 /
> keys are pressed.
You cannot use the <Fn>+<F4/
prompt or extended desktop.
> shortcut key in the full screen mode DOS
To change display devices easily
Right-click on the desktop, and select Graphics Options > Output To to change
the current display device easily.
To change the screen resolution and color quality
If the screen does not appear clearly, please try to change the screen
resolution and colour quality. In the figure of step 3, select a Display Settings,
and adjust Color Quality, Screen Resolution, Refresh Rate of right screen.
When using an LCD and a wide monitor, the LCD and monitor screen sizes
may differ. To make them the same size, select ‘Intel(R) Dual Display Clone’.
108 Users Manual
System Management
Using Power Management Options
Your computer includes Power Management options that can help the battery charge
last longer and extend the life of the battery. Power-management options will slow
down or shut off system components when the components are not being used.
Power management may slow down system performance. Your computer runs fastest
with the power cord attached, whereby power management is disabled.
In the next sections, basic and advanced methods of power management will be
discussed.
Basic Power Management Schemes
This section discusses the basic schemes of power management when the computer is
operating on battery power or using AC power.
Standby vs. Hibernation
Hibernation is a state where the contents of memory are stored in a special file
on the hard disk, and Standby simply keeps a small holding current through
the memory to keep the data. You are more likely to sustain loss of data in
Standby mode so it is recommended to save all open files before entering
Standby.
Changing Devices:
Do not change PC Cards while in standby or hibernate modes.
To enter the power management window complete the following:
1. Click Start > Control Panel > Performance and Maintenance.
2. Click
icon to display the Power Options Properties window.
System Management 109
3. Click the Power Schemes tab to display the basic power management options.
By default, the power scheme is configured to BatteryMgr-normal mode.
BatteryMgr-normal mode extends the battery life and optimizes the Intel
Speedstep function. Since the CPU power consumption is automatically
optimized to conserve power when the computer is operating on battery
power, an application may be executed slower than when it is operating on AC
power.To use BatteryMgr-normal mode after reinstalling Windows, install the
Battery Manager program using the system software Media.
4. Select the time that you wish each of the following actions to occur in Battery and
AC power mode.
•
•
•
•
Turn off monitor
Turn off hard disks
System standby
System hibernates
Turning off the monitor and HDDs will save a substantial amount of battery power,
therefore when in battery only mode select the shortest time practical.
You can also reserve Turning Computer Off, Maximum Power Saving Mode,
Hold Mode, etc. by selecting System > Computer Scheduling in the
EasyBox program. (see “Using EasyBox” on page 36.)
If you change the power settings in the Battery Manager program, the settings
of the 'Power Options Properties' window are automatically changed
accordingly (”Using the Battery Manager” (p116)).
110 Users Manual
Hibernate Mode (Power Management or Manual Method)
When hibernation is used, your computer turns off and when you power up again,
everything is restored exactly as you left it—including programs and documents
you may not have saved or closed. Everything in memory gets saved to the HDD,
and the monitor and hard disk get turned off.
If You Reinstall Windows:
You should re-establish hibernate in power options by opening Power
Options Properties window and click on the Hibernate tab then click
“Enable Hibernation”.
Hibernate Tab
Frequent Interruptions:
If you experience frequent interruptions, you might also consider putting your
computer into automatic hibernation after a specified number of minutes using
the power management options.
Standby Mode (Power Management or Manual Method)
Standby is used mainly for conserving battery power in your notebook computer. It
also gives you the benefit of getting right back to your work without waiting for the
computer to restart. Standby turns off your monitor and hard disks, placing your entire
system in a low-power state. When you return to your computer, restores your desktop
exactly as you left it. It is recommended that you do not enter standby mode with less
than 20% battery power.
5. Click OK to set your power management options and close the window.
System Management 111
Rest Key:
The manual <Fn+Esc/
> key combination will not activate Standby or
Hibernate modes while you are playing a multimedia program or have an
active USB device connected.
Advanced Power Management Schemes
This section discusses the advanced power management schemes. There are two
buttons that you can use to manually conserve power.
To enter the power management window complete the following:
1. Click Start > Control Panel > Performance and Maintenance.
2. Click
icon to display the Power Options Properties window.
3. Click the Advanced tab to display the advanced power management options.
Advanced Tab
Power & Sleep Button
Programming Windows
4. Select the mode (Do nothing/Ask me what to do/Standby/Hibernate/Shut
down) assigned to the Power button and/or Rest <Esc/ > key. Also select the
action (Do nothing/Standby/Hibernate) associated with closing the computer
lid.
112 Users Manual
The “Rest” key is assigned to the <Fn+Esc/
> key combination. ”Basic
Power Management Schemes” on page 109 for a better understanding of
Standby and Hibernate modes.
5. Click OK to set your power management options and close the window.
You can return to normal operation after you have used one of the “Power
Management” buttons by quickly pushing and releasing the Power button.
System Management 113
Using the Battery
Please refer to the following instructions when running the computer on battery power
without connecting the AC power.
Please read the instructions on the battery before use.
Please refer to the system operation environment (p157) of this manual and
operate and store the battery at room temperature.
Ejecting and Attaching Battery
1. Shutdown the system and close LCD.
2. Put the computer upside down on a flat surface.
3. Pull the two battery latches outward.(
), then remove the battery.
4. To install the battery again, slide the battery into the system as below. The battery
latches move inward, and fix the battery automatically.
114 Users Manual
Monitoring the Battery Charge
You can view the battery charge status by completing the following procedures.
To use the shortcut key to view
Press the <Fn>+<F2/ > key combination on the keyboard and then the current power
source and the current remaining battery charge are displayed at the top left of the
screen.
To view on the battery
Click the PUSH button on the battery. The remaining battery charge (%) will be
displayed.
Push button
To view through the Control Panel
Select Start > Control Panel > Performance and Maintenance > Power Option >
Power Measure tab.Then you can view the current power source and the current
remaining battery charge.
Power Supply Status
Remaining Battery Charge
System Management 115
Using the battery
Battery is an expendable supply, so when you use it for a long time, the
capacity/battery life is shortened. If the battery life is reduced to under half of
the initial time, we recommend that you purchase a new battery to use.
Battery Warning
You will hear an alarm when the remaining battery charge is under 10%.
Connect the power cable or turn off the computer and install a fully charged
battery.
When the remaining battery charge is under 3%, the computer automatically
saves current work and turns off. This may be different according to the
settings in Control Panel > Performance and Maintenance > Power
Options > Alarms tab.
Extending the battery use time
Decreasing the LCD Brightness
Decreasing the LCD brightness by pressing the <Fn>+< > key combination on the
keyboard or adjusting the brightness in the Battery Manager program extends the
battery use time.
Decreasing the LCD brightness by one level extends the battery use time by 3~5%
(10~20 minutes). (The battery use time is determined by the corresponding model.)
Using the Battery Manager
Battery Manager is a power management program that enables using battery power
efficiently.
You can easily change the power mode by selecting an optimized power mode and
manually optimizing the battery use time by setting each option.
116 Users Manual
Click on Start > All Programs > Samsung > Samsung Battery Manager >
Samsung Battery Manager.
Change Power Mode
You can only change the
detailed configuration in
Custom Mode.
Power Saving
Effects
• Maximum Battery Saving Mode : This mode is appropriate for conditions
which require the maximum battery use time. This may degrade the
performance of the system.
• Normal Mode : This mode is appropriate for normal conditions. Both system
performance and battery use time are optimized.
• Maximum Performance Mode : This mode is appropriate for conditions that
require maximum system performance.Therefore, the battery usage time may
be reduced in this mode.
• Custom Mode : In this mode, a user can configure a detailed configuration to
save the battery usage time. You can adjust the LCD brightness, the system
standby time, the screen color quality, and the graphic mode values.
Power Saving Effect
This shows the relative battery use time for each power mode. The more
effective the power saving, the longer the graph will appear.
When Running a Game or Multimedia Application
A game or multimedia application may not work smoothly in Maximum Battery
Saving Mode. Using this is recommended when the AC adapter is connected
or in Normal or higher modes.
System Management 117
Turning Off Unnecessary Devices
Turning off unnecessary devices extends the battery use time.
Select the Start > Control Panel > Performance and Maintenance > System >
Hardware tab and click Device Manager. Right-click a device you are not using, and
select 'Disable' (e.g. wireless LAN, 1394 , etc.)
Battery Calibration
If you charge/discharge the battery repeatedly for only a short time, the battery use
time may be reduced by the difference between the actual battery charge and the
remaining charge display. In this case, the actual battery charge and the remaining
charge display will be same by discharging the battery completely using the Battery
Calibration function, and then recharging it again.
1. Disconnect the AC power adapter after turning off the system.
2. Restart your computer and press <F2> to enter BIOS setup.
3. Using the arrow keys, highlight Smart Battery Calibration in the Boot menu. The
Battery Calibration function is activated and the battery is discharged forcibly.
This operation requires 3~5 hours depending on the battery capacity and the
remaining battery charge.
4. When the calibration process is complete, recharge the battery fully.
118 Users Manual
Upgrading Memory
This computer has one or more 128 MB or 256 MB memory module(s). Two memory
module sockets are provided so that you can replace memory or install an additional
memory module.
Removing the memory module
Before removing/replacing the memory module, turn the system off
completely. Do not replace the memory module when the system is in
Standby/Hibernate mode.
1. Using a screwdriver, open the memory module compartment cover on the bottom
of the computer.
screw
2. Push the memory module tabs outward to pop the memory module upwards.
Carefully pull the module out at an angle of about 30°.
System Management 119
Adding a memory module
1. Align the new memory module connectors accordingly and slide it into the slot at
a 30° angle.
Ensure the notch on the memory module corresponds with the notch on the
socket.
2. Push the memory module in until the module clicks into place. If the memory
module is not fixed completely, gently push the memory down while pressing the
memory module tabs outward.
3. Close and fix the memory module compartment cover using a screwdriver.
120 Users Manual
Using the Security Lock Port
The security lock is a device used to physically 'fix' the system when using it in a public
place. The locking device needs to be purchased separately. The shape and methods of
use may differ depending on the manufacturer. Please refer to the manual provided
with the security lock for proper use.
1. Connect a security lock cable to a fixed object.
2. While holding the security lock port lever to the left, connect the cable to the
security lock port.
Any damage to the machine caused by using a locking / security device is not
covered under warranty.
System Management 121
Tips for Using Your Computer
The following information helps you avoid potential problems as you use your
computer:
Do not try to disassemble your computer. Opening the system chassis voids
your warranty. Only an authorised manufacturer service center can replace or
add any parts inside the chassis.
• Follow all the instructions and cautions in your computer user documentation.
• The LCD has a polarized surface and can be damaged easily. To prevent
damage, avoid touching the screen.
• Use only approved AC adapters, auto adapters, memory modules and other
options.
• Because a notebook computer is small and has restricted air flow around
components, it is more likely to overheat than a desktop computer. A fan inside
your computer runs when needed to help eliminate heat. Make sure the fan vent
on the left side of your computer is not blocked when you use the computer.
Occasionally check the vents and remove any accumulated dust on the outside.
• Avoid using or storing the computer in extremely hot or cold areas, such as a
car on a hot day. Keep the computer away from heaters and out of direct
sunlight. Exposure to excessive heat may damage computer components. If you
have left your computer in a hot place, let it cool down slowly to room
temperature (with the LCD panel open) before using it.
• Do not remove the memory-module compartment door, or try to install a
memory module when the computer is on.
• Set up your computer work area to avoid physical strain. Sit with your back
straight and supported by your chair. Adjust your chair or work table so that
your arms and wrists can remain in a relaxed position, parallel with the floor.
Avoid bending or twisting your wrists as you work. Your hands should “float”
slightly above the keyboard. Refer to a book on office ergonomics for more
information on setting up your work area.
• Take frequent breaks from working at the computer to rest your eyes and
stretch your muscles.
• Remember to save your data files frequently and to make backup copies of your
files.
122 Users Manual
Travelling with Your Computer
Air Travel
If you are travelling by air, follow these tips:
• Take the computer with you as carry-on luggage. Do not check the computer
with your baggage.
• Allow the computer and disks to go through the X-ray security devices. Do not
hand-carry disks through the walk-through metal detectors, which can cause
loss of data.
• Be prepared to turn off the computer during take off and landing.
Handling Spills
Do not spill anything on your computer. The best way to avoid spills is to avoid eating
and drinking around your computer. If you do spill something on your computer, turn
off your computer, unplug it immediately, and do the following:
• If you spill liquid on the keyboard, drain as much of the liquid from the
keyboard as possible. Be careful not to let the liquid drip onto the LCD panel.
Allow the system to dry for several days before trying to use it.
• If you spill liquid on an external keyboard or keypad, unplug it and drain as
much of the liquid as possible. Allow the keyboard to sit at room temperature
for a full day before trying to use it.
Sweet liquids leave a sticky residue that may jam the keyboard despite your
efforts to dry it.
• If you spill liquid on the LCD panel, clean it immediately with a soft cloth and
denatured alcohol or a proprietary LCD screen cleaner. Do not use water,
window cleaner, acetone, aromatic solvent, or dry, rough towels to clean it.
Some liquids damage the polarized LCD screen. If your screen is damaged,
contact your authorized manufacturer’s service center for a replacement.
System Management 123
Storing the Computer for Long Periods
If you will not be using the computer for a long period of time (a month or more), you
should discharge the battery completely then remove the battery from the computer.
This extends the life of the battery.
124 Users Manual
Troubleshooting
Complete the following in the order presented until your system is functioning
properly. If all of the steps below fail then contact your local reseller for assistance.
Questions and Answers
Please see “Questions and Answers” on page 126 for assistance in correcting any
computer operational problems.
Check the Connections
Verify all of the power and peripheral cables are securely plugged into their sockets
and that your system and power supply is on.
Norton AntiVirus
Run Norton AntiVirus to ensure a virus is not affecting your computer.
To run Norton AntiVirus proceed as follows:
Click Start > All Programs > Norton AntiVirus > Norton AntiVirus 2005.
Windows Help and Support
Run Windows Help and Support to find problem that may be affecting your computer.
To run Windows Help and Support proceed as follows:
Click Start > Help and Support.
Frequently Asked Questions
To view FAQ’s on your computer, please visit www.samsungpc.com.
Reinstalling Software
If for some reason your system crashes you may corrupt your HDD, Windows
operating system and/or some of your device drivers. If this is the case, use System
Recovery CD to reinstall OS and System Software Media to reinstall the corrupt
device drivers.
System Recovery Precaution:
Before you start restoring your windows operating system insure you backup
all data on your hard drive.
Samsung is NOT responsible for any data loss.
Troubleshooting 125
Questions and Answers
This section provides information on possible problems, solutions and other references
for system use.
Windows Related
Q1 The system does not shutdown properly.
A
When the system does not shutdown normally, press and hold the Power button
until the system manually shuts off. If the Power-Saving Mode is configured into
the Power button, press and hold for more than 4 seconds to shut the system off.
When the system is turned on after such manual shutdown, Scandisk will run to
check errors in the system.
Q2 The system freezes during program operation
A1
There is an error with the program currently being used. Press the <Ctrl>, <Alt>,
and <Delete> keys simultaneously and click End Task in the [Windows Task
Manager] window.
A2
There is an error with the Windows OS. Reboot the system by using the Power
button.
126 Users Manual
Display Related
Q1 The LCD screen is too dark or too bright
A
Adjust the LCD screen brightness. Use the <Fn>+<
>, <Fn>+<
> keys.
Q2 The screen saver disturbs screen viewing during Media Player or video file
operation.
A
Unselect Tools > Options > Player > Allow screen saver during playback in the
Media Player.
Q3 In DOS mode, changing the full screen DOS mode by pressing
<ALT>+<Enter> key displays a broken image for a short period.
A
The DOS mode which supports 2 Byte characters such as Korean and Japanese
runs in graphic not in text mode. In this case, a broken image may be displayed
while changing the video mode settings.
Q4 In the following cases, the screen blinks or displays noise for a short time:
(Click on the Graphics related tab, change the Resolution, change the
Display Device, remove the AC Adapter, restart the system and change the
PowerPlay level.)
A
This may happen while the video driver is examining the connected device.
While detecting, any connected display devices may blink or some noise may
occur.
Q5 When I connect a projector, and change the setting to display screen image
on both the LCD and the projector by pressing <Fn>+<F4 /
> keys,
screen is not displayed properly.
A
Press <Fn>+<F4 /
> keys once again.
Q6 The desktop momentarily appears as a broken image when zooming in or
out of the Media Player screen when Media Player is running.
A
Since zooming in or out of the Media Player screen changes the screen resolution,
the desktop may momentarily appear as a 'broken image' during this operation.
Troubleshooting 127
Q7 A DVD or an MPEG file is only played on the LCD (ATI chipset model)
A
When both the LCD and the CRT are being used simultaneously, video plays on
one of them by default.
1.
Right-click over the Desktop and select Properties.
2.
In the [Display Properties] window, click the Settings tab > Advanced > ATI
Overlay tab.
3.
Select the Theater Mode option, and then configure the Overlay Display Mode to
'Theater Mode' or 'All The Same’ and then click on Apply. Then you can view
the video on both the LCD and CRT screens.
Q8 Pressing the <Fn>+<F2/ > keys while booting displays a red line on the
screen. (For ATI chipset models)
A
Pressing the <Fn>+<F2/ > keys in the Setup screen or while booting the
system may display a red line on the screen. This is a problem that occurs while
drawing an icon on the screen and does not affect the operation of the system.
Q9 When I change the power source to the battery by removing the AC adapter
or change the display device to CRT from LCD, I sometimes see a
POWERPLAY warning message (ATI chipset models)
A
The PowerPlay function is a new technology that extends the battery usage time.
PowerPlay works only when the system is operating on battery power and using
an LCD. When the PowerPlay function is disabled due to a changed operating
environment, the PowerPlay function warning message may be displayed.
Q10 I cannot see the Taskbar on the Desktop when I use a projector (ATI chipset
models)
A
128 Users Manual
This happens when the projector does not support the screen resolutions of 1400
x 1050 pixels or 1680 x 1050 pixels which are supported by the 15.4" WSXGA+
LCD monitor. In this case, change the system screen resolution to 1024 x 768
pixels (recommended).
Modem Related
Q1 I cannot hear the modem sound.
A1
Check that the telephone line is properly connected to the modem.
A2
Check that the modem driver is installed properly.
1.
Click Start > Control Panel > Performance and Maintenance > System.
2.
Select Hardware tab > Device Manager > Modems in the System Properties
window, and check if there is a yellow exclamation mark on the installed modem
icon. If there is, delete the modem device driver and reinstall the driver, because
the yellow exclamation mark represents a not properly installed driver.
3.
If there is no yellow exclamation mark, double-click the installed modem, and
click Diagnostics tab > Query Modem in the Modem Properties window to
diagnose the modem.
No message in either of Command and Response in the Diagnostics tab means
that the modem is not operating properly.
Diagnose the modem again after restarting the system or reinstalling the driver.
(You have to exit all programs using modem in the advance of diagnostics of the
modem).
A3
Although I can make a connection with the modem, I cannot hear the dial tone
and modem connection sound. In this case check the following list:
1.
Click Start > All Programs > Accessories > Entertainment > Volume Control.
2.
Clear the Mute check box in the Telephone Line item.
(Depending on the sound driver, it may be displayed as another name such as
Modem, Phone, Mono. If there is no corresponding item, click Options >
Properties > Volume Control, select 'Playback', and select the 'Telephone Line'
under the 'Display the following volume controls'. Click OK.)
Q2 I cannot make a call using an extension line.
A
In general, the dial tone of a PBX or a digital phone switching system is not a
continuous one, unlike that of a trunk line.
Therefore, the modem may not make a call because the modem mistakes the dial
tone from a PBX or a digital phone switching system as a busy tone.
In this case, complete the following procedures.
Troubleshooting 129
- Using an AT command
As an initialization command, use the command, ATX3.
Otherwise, enter the ATX3 command manually before making a call.
It can correct this problem by skipping the dial tone check step.
- Configuring the Modem through the Control Panel
1.
Click Start > Control Panel > Network and Internet Connections.
2.
Under See Also, click Phone and Modem Options.
3.
In the Modems tab, select the installed modem, and click Properties.
4.
In the Modem tab of the Modem Properties window, clear the 'Wait for dial tone
before dialing' check box.
5.
When the configuration is completed, click OK.
Q3 How do I use my modem when dialing from overseas?
A1
Check that the modem is correctly configured according to the current country.
Because the values for communication may differ according to the country, you
may not be able to connect via the modem due to an incorrect modem
configuration.
1.
Click Start > Control Panel > Network and Internet Connections.
2.
Under See Also, click Phone and Modem Options.
3.
In the Dialing Rules tab, click Edit.
4.
In the General tab in the Edit Location window, select the current country from
the Country/region radio box, specify the Area code, and click OK.
A2 Because the shape of the telephone plug may differ according to the country, you
have to purchase and use the appropriate telephone plug for that particular
country.
Q4 How do I receive a fax while the system is in power saving mode (Rest mode)
(For Windows XP and 2000)?
A
To receive a fax when the system is in power saving mode, and the operating
system is Windows XP or 2000, configure the system as follows:
1.
The automatic fax reception function of the fax program needs to be activated.
(For more information, refer to the corresponding fax program manual.)
2.
Click Start > Control Panel > Network and Internet Connections.
3.
Under See Also, click Phone and Modem Options.
130 Users Manual
4.
In the Modems tab, select the installed modem, and click Properties.
5.
In the Power Management tab of the Modem Properties window, select the “With
this device, exit the computer from stand-by mode” item and then click OK.
The above setting enables the modem to turn on the system and receive a fax
when in power saving mode.
Wired LAN Related
Q1 <Wake On LAN> function
A
<Wake On LAN> is a function that activates the system in rest mode when a
signal (such as ping or magic packet commands) arrives from network (wired
LAN).
To use <Wake On LAN> function:
1.
Select My Network Places > View network connections from the Desktop.
2.
Click the right button on the touchpad over Local Area Connection, and select
Properties.
3.
Click Configure, and select Power Management tab. Select ’Allow this device to
bring the computer out of standby’, then click OK. Restart the system.
- If the system in rest mode is activated when there is no received signal, use the
system after disabling <Wake On LAN> function.
- Connecting wired LAN while using wireless LAN may not execute <Wake On
LAN> function. Configure wireless LAN to ’Disable’ to use <Wake On LAN>
function.
1.
Click on My Network Place> View network connections on the Desktop.
2.
Right-click over Wireless Network Connection and select Disable.
Q2 When I connected 100Mbps wired LAN and the computer exits standby/
hibernate mode, a message informing 10Mbps wired LAN connection
appears.
A
When the computer exits standby/hibernate mode, restoring the network takes
about 3 seconds. When the network is restored, it operates in 100Mbps.
Troubleshooting 131
Wireless LAN Related
Refer to ”Connecting Through a Wireless LAN (Option)” (p67) for the basic uses of a
wireless LAN.
Q1 The Wireless LAN device is operating properly, but I cannot connect to the
Internet or to another computer.
This is due to an incorrect configuration, or a configuration error. Check the
following check lists:
A1
If you are using a computer-to-computer (Ad Hoc) network connection, check
that the name of the configured network (SSID) is correct. The network name
(SSID) is case sensitive.
A2
If you are using a network key (encryption key), you have to use the same
network keys for an AP (Access Point) or a computer-to-computer network (Ad
Hoc). The network key of the AP is configured in the AP management program.
Ask your network administrator or AP manager for more detailed information.
A3
Check that the device driver is properly installed. If the driver is not properly
installed, you will find a yellow exclamation mark on the network icon by
clicking Start > Control Panel > Performance and Maintenance > System >
Hardware tab > Device Manager > Network adapters > Wireless LAN adapter. If
there is a yellow exclamation mark, please reinstall the device driver with the
system software Media.
A4
Referring to A2 of Q3, Check that the network bridge configuration is correct.
Q2 The signal strength is excellent, but I cannot connect to the network.
Even if the signal strength is excellent, the network connection may not operate
properly if the TCP/IP properties are not properly configured, or the network key
(encryption key) is incorrect.
A1
Check that the TCP/IP properties are configured properly. When you connect to
an AP, click the Wireless Network Connection icon on the taskbar and select the
Support tab. If the IP is not allocated properly, the IP address will be displayed
as follows (e.g. 169.254.xxx.xxx).
If the network does not provide DHCP, you have to specify the correct IP address
by asking your network administrator.
Even if the network provides DHCP, the server may not allocate an IP address to
the client properly, and the client station cannot connect to the network.
A2
Referring to A2 of Q1, check that the network key is correct.
A3
Referring to Q4, check that AP is operating properly.
132 Users Manual
Q3 I cannot share an Internet connection.
A1
It may require some time to synchronize the computers to share an Internet
connection after the Internet connection sharing configuration is completed. If
you cannot share Internet connection even after a longer period, restart the
computer.
A2
Check if the connection between the network adapters is configured to bridge. If
there is a configured bridge connection between the network adapters through the
network configuration wizard, remove the network bridge, and reconfigure the
Internet connection sharing.
A bridge connection is created when you ran Network Setup Wizard from the
[Network Connections] window, and selected both the internal connection
adapter and another adapter in the wizard.
Q4 I cannot connect to the AP.
Check the Computer Settings
A1
Verify whether the wireless LAN function of the computer is on by doing the
following. If the wireless LAN function is off, turn it on.
- For Windows XP, verify that the wireless network connection has been set to
"Enable" in Start > Control Panel > Network Connections.
- If there is a Wireless LAN On/Off button, check if the wireless LAN button is
pressed.
A2
Verify whether the same network key (encryption key) has been entered in both
the AP and the computer.
The network key is an encryption key for encrypting data transmitted between the
AP and the computer. It is recommended setting the network key manually.
Check the AP Settings
For the AP settings, refer to the User's Guide provided by the AP manufacturer.
A3
Verify whether the environment is suitable for using a wireless LAN.
The use of a wireless LAN may be restricted according to the environment and
distance. Obstacles such as walls or doors affect the use of a wireless LAN.
Install the AP in a high and open space 50cm from the wall and far removed from
any other radio signal sources.
A4
Verify whether the AP is operating properly.
- When the AP is not operating normally, turn off the AP and after a short while
turn it on again.
Troubleshooting 133
- Verify whether the AP's firmware is the most recent version. (Contact the AP
manufacturer or the place where you purchased the AP for details of the AP
firmware.)
A5
Verify whether the AP has been properly connected to the network.
Verify whether the network is operating normally by connecting the wired
network cable, which has been connected to the AP, to your computer.
A6
Check the network key settings (encryption key).
When automatic code conversion (a passphrase function) has been selected and
data communication is not functioning even with a normal wireless connection,
it is recommended entering the network key (encryption key) manually.
A7
Check the AP settings as follows. (The following is recommended for a standard
environment and thus may differ according to the specific wireless network
environment.)
- When several APs are present simultaneously, check the channel setting for
each AP. When different APs are using nearby channels, interference may occur
between electronic waves. Set the APs' channels further apart from each other.
(Ex: Ch1, Ch5, Ch9, Ch13)
- When an AP's SSID (Service Set ID) option is set to "Hide", you cannot search
for that AP on the computer. We recommend canceling the "Hide" option for an
AP. The SSID is a name for distinguishing one wireless LAN from another
wireless LAN.
- It is recommended using Long Preamble. Preamble is a signal for data
transmission synchronization. Short Preamble may be supported by some types
of APs but may cause compatibility problems.
- It is recommended using a static IP.
- Since static channel selection is more reliable than auto channel selection, it is
recommended setting a static channel.
Q5 In the Windows XP 'Available wireless networks' window, the Wireless
Network Connection is displayed as 'Not Available'.
A1
When there is a Wireless LAN button, ensure that the Wireless LAN button is
turned on.
A2
Check if there is additional program for a wireless LAN connection installed.
Windows XP supports wireless LAN connections through the Wireless Zero
Configuration (WZC) service. Therefore, an additional program for wireless
LAN connection is not required, unless the network requires a specific program.
However, installation of some wireless LAN related programs may sometimes
134 Users Manual
disable the [View Available Wireless Networks] window supported by WZC
service. Exit the wireless LAN related program then check whether the window
is enabled.
A3
Initialize the device driver.
Click Start > Control Panel > Performance and Maintenance > System >
Hardware tab > Device Manager > Network adapters, and select the wireless
LAN adapter. Right-click the network adaptor and select 'Disable'. Then rightclick over the network adaptor and select 'Enable' after a short wait to check that
the device is operating properly.
A4
Right-click the My computer icon, and select Manage. When the Computer
Management window appears, double-click Services and Applications on the
left, and then click Services from the sub menu tree. Select the Standard tab in
the right pane, double-click Wireless Zero Configuration and check that Startup
Type is configured to Automatic, and the Service status is Started.
A5
In the case of Windows XP, click Advanced in the [Wireless Network
Connection] dialog box (see ”Connecting to an Access Point (AP)” (p68)) and
make sure that 'Use Windows to configure my wireless network settings' is
selected.
This may happen when a third-party wireless network setup program (e.g.
PROSet) other than Windows XP default program is installed. For setting up a
wireless network using the Windows XP program, this option should be selected.
Q6 When connecting to a computer-to-computer (Ad Hoc) network, I cannot
connect to another computer connected to the same computer-to-computer
network.
A1
Make sure that the security settings and network name of the computer-tocomputer (Ad Hoc) network is correct.
A2
Check the TCP/IP properties of the computers to be connected through the
computer-to-computer (Ad Hoc) network. All of the computers to be connected
through a computer-to-computer (Ad Hoc) network should be configured so that
their IP addresses are within the same subnet range.
- If the TCP/IP Settings are configured to DHCP, the address is automatically
configured to an address within the subnet IP range. This will take about 2~3
minutes.
- If the IP address is configured to static IP in TCP/IP properties, select Use the
following IP address in the TCP/IP properties of the wireless adapter, configure
IP address:10.0.0.1~10.0.0.254, and Subnet mask: 255.255.0.0, and then try
again.
Troubleshooting 135
- A fixed IP is recommended for a small-size network.
Q7 When using a computer-to-computer (Ad Hoc) network, sometimes I cannot
search the access point.
A
It may happen occasionally when you are using a computer-to-computer (Ad
Hoc) network connection. Even if you cannot find some access points, the
computer-to-computer (Ad Hoc) network is operating properly. Click Refresh to
view the latest search result.
Q8 Running Help file while running Profile Wizard in the wireless LAN
program (PROSet) makes the PROSet window white.
A
It will be displayed properly when you finish the profile wizard. It dose not affect
the program operation.
Q9 The network does not operate properly when both the wireless and the wired
network connections are simultaneously configured with the same IP
address.
A
You cannot use the wireless and the wired network connections using the same
IP address simultaneously. To use either the wireless or the wired network in turn
with the same IP address, you have to Disable whichever network device will not
be using in the network connection of the Control Panel.
Q10 The wireless LAN does not work properly when there is a device operating
on an adjacent frequency in the vicinity of the product.
A1
Channel interference may occur when a wireless video transceiver or a
microwave oven is being used.If you experience channel interference from other
equipment, it is recommended changing the channel to connect to the AP. For
more information about AP settings, refer to the User Manual supplied by the AP
manufacturer.
A2
IEEE802.11g equipment operates in hybrid mode when there is active
IEEE802.11b equipment. This may result in data rate degradation.
Q11 An established wireless LAN connection is disconnected after 2~3 minutes,
and the connection is not recovered.
A1
136 Users Manual
This may be caused by channel interference. Change the channel of the AP, and
reconnect.
A2
This may be caused by selecting the ’Use IEEE 802.1x network authentication’
option when IEEE 802.1x authentication is not available.
Check the properties of the AP in the wireless network settings. If the ’Use IEEE
802.1x authentication in this network’ option is selected, deselect the option on
the Authentication tab.
For more detailed information about authentication server, ask your network
administrator.
A3
If the AP is configured to ’Use network authentication (Shared Key)’
If the AP is configured to authentication shared mode, all computers to be
connected should be configured as follows:
- If you are using Windows XP, select network authentication(shared mode) in
the wireless network settings.
Select Start > Control Panel > Network and Internet Connections > Network
Connections, right-click the Wireless Network Connection icon and then select
View Available Wireless Networks.
Select Change Advanced Settings from the left menu, select an AP from
Preferred networks window in the Wireless Networks tab, and click the
Properties button. Select Shared Mode in the Network Authentication field of the
Association tab, and then click the OK button.
If the Preferred networks window in the Wireless Network tab is empty, click
View Wireless Networks, select an AP to connect to, and select Shared Mode in
the Network Authentication field of the Connection Information tab as described
above.
For more detailed network authentication procedures, ask your AP (Access
Point) administrator.
Q12. After the wireless LAN connection program is installed, the AEGIS Protocol
(IEEE 802.1x) appears in the [Local Area Connection Properties] window.
A
The AEGIS protocol is for security authentication protocol that is automatically
installed when the wireless LAN connection program is installed and does not
affect the operation of other programs.
Q13 Although I have turned the wireless LAN off using the Off Button on the
wireless LAN connection program, the wireless LAN operating light is still
on.
Troubleshooting 137
A
This is normal. The Off Button for the Wireless LAN on the wireless LAN
connection program only turns off the S/W and not the H/W for the Wireless
LAN.
Q14 After installing the wireless LAN connection program, I cannot manage
wireless networks under Windows. (For 11a/g, 11g cards)
For Intel Wireless LAN Cards
A1
Select the “Use Microsoft Client” from the Tools menu of the PROSet program
to manage wireless networks in Windows.
To continue managing the wireless network through the PROSet program, select
“Enable Intel PROSet/Wireless” from the Tools menu of the PROSet program.
For Atheros Wireless LAN Cards
A2
138 Users Manual
In the Wireless Network tab of the Wireless Network Connection, select
Construct Wireless Network and then click the OK button.
Games and Programs Related
Q1 3D game is not executed, or some functions are not working.
A
Change the graphic setting of the game to '2D' or 'Software Renderer', then
execute the program again.
Q2 I launched a game right after installing it, and the game is not executed.
A
This problem may occur when the game is not compatible with Windows XP.
Launch the game again, and it will be executed properly.
Q3 A game runs only in small screen format.
(ATI chipset models)
A
This may happen when the display settings are configured to reduced mode ('Use
Centered Output'). To view the game in full screen mode, complete the following
procedures.
1.
Right-click on the desktop using the touchpad, and then select Properties.
2.
In the [Display Properties] window, click the Settings tab > Advanced > ATI
Display tab.
3.
Select the Panel item, and select ‘Extend the image to the screen size’ in the
Display Properties.
(Intel chipset models)
A1
Before launching a game, right-click over the Desktop, and select Graphics
Option >Fit to Monitor > Available.
A2
Before launching a game, configure to the Full Screen mode as follows.
1.
Right-click in the video screen,
2.
Click Graphics Options > Graphics Properties > Devices tab.
3.
Click the corresponding device and then select 'Full Screen'.
4.
Click OK.
Q4 While playing a 3D game, I tried to change display devices using <Fn> +
<F4/ > keys, then the system does not operate.
A
When you use <Fn> + <F4 /
> keys while playing a 3D game, a system error
may occur.
Do not use <Fn> + <F4 /
> keys while playing a 3D game.
Troubleshooting 139
Q5 <Fn+F4/
A
> Key combination does not work.
While displaying video of VCD or MPEG, or the display setting is Dual View,
you cannot toggle display devices. Also the installation of NetWare Client 32
program disables the function of <Fn+F4/
>.
Q6 While playing a game, pressing the <Fn>+<F4 /
the screen is not properly displayed.
A
>keys does not work or
Some games and 3D application programs may change the display device
control. Therefore, pressing the <Fn>+<F4 / > keys may terminate the running
program or may display an abnormal screen.
Press the <Fn>+<F4 / > keys before launching a program and do not press
them while running the program.
Q7 Running speed of a game is too slow or fast.
A
Change the setting of Power Schemes to 'Always On'.
(Click Start > Control Panel > Performance and Maintenance > Power Options >
Power Schemes tab, then configure the Power schemes field to 'Always On'.)
Q8 Pressing <Fn>+<F2/ > keys while running a game may cause abnormal
operation of the system.
A
Do not press <Fn>+<F2/
a system error.
> keys while a game is running, because it may cause
Q9 Some part of a game image is not displayed or is displayed in black.
A
This may happen when running a game designed for DirectX 8.1, such as NHL
2003, MVP Baseball 2003, etc.
Q10 When playing a game, the image display temporarily freezes a number of
times.
(ATI chipset models)
A
This may happen when the PowerPlay setting is configured to ‘Optimal Battery
usage time’ or ‘Balance’.
1.
Right-click over the Desktop and then select Properties.
2.
In the [Display Properties] window, select the Settings tab > Advanced > ATI
POWERPLAY tab.
140 Users Manual
3.
Click the PowerPlay Settings button, and set the Plug-In, High Battery and Low
Battery sliders to ‘Optimal Performance’ and then click Apply.
(Intel chipset models)
A
This may happen when using the DFGT function.
1.
Right-click over the Desktop and select Graphics Option > Graphics Properties
> Device tab.
2.
Click Notebook and click ‘Power Schemes Settings'.
3.
Unselect 'Intel® Dual-Frequency Graphics Technology'.
4.
Click OK.
Q11 The screen is severely interrupted in some games.(ATI chipset models)
A
In 3D games, the texture data needed in 3D screen presentation are stored in the
system memory. When the system memory is not enough, the data is stored in the
hard disk and transferred to system memory when the data is needed. In some
games, the screen may be interrupted during this process.
Lower the game resolution or texture image quality.(Linage 2, Terminator 3,
Delta Force : Black Hawk Down, Medal of Honor, Battlefield 1942, etc.)
Q12 When I run 'The Sims Fun Party' game in Dual Display Clone mode, a
mouse cursor afterimage appears (Intel chipset models)
A
Change the display device to LCD only, by pressing the <Fn>+<F4 /
and launch the game again.
> keys
Q13 When I play multiple avi and mpg files with Mplayer2, a different screen
plays (Intel chipset models)
A
This may happen when you play more than 3 video files simultaneously. Please
play only up to 2 video files at a time.
Troubleshooting 141
Security Center
Q1 To change the popup window display settings when connected to the
Internet.
In the Windows XP SP2 environment, you can decide whether to display a popup
window when connected to the Internet, for user convenience and security.
A1
To display most of the popup windows when connected to the Internet:
1.
Click on Internet Options in Start > Control Panel > Security Center > Manage
security settings for.
2.
In the Privacy tab of Internet Properties, clear Block pop-ups.
A2
To display popup windows only from the current site when connected to the
Internet:
Place the cursor on the notification area at the bottom of the Internet address bar
and right-click to display a menu, from which you can select Temporarily Allow
Pop-ups or Always Allow Pop-ups from This Site.
A3
To display popup windows from a particular site:
1.
Click on Internet Options in Start > Control Panel > Security Center > Manage
security settings for.
2.
In the Privacy tab of Internet Properties, click on Settings from Block pop-ups.
3.
Enter a URL to want to allow pop-ups into Address of Web site to allow and click
on Add.
4.
You will find that the entered address is added to the allowed sites list. The next
time you connect to the Web site, you will see pop-ups appearing.
When you need to re-block a permitted site, select the Web site address that you
want to block from the Allowed Sites and click on Remove.
Q2 When you connect to a Web site, you see the message, “To help protect your
security, Internet Explorer stopped this site from installing an ActiveX
control on your computer” or “This site might require the following ActiveX
control” below the address bar.
A
Windows XP SP2 blocks unsigned ActiveX controls from being installed when
connected to certain Web sites for security reasons. On some Web sites that have
no ActiveX controls installed, applications are not started or do not display
properly.
In this case, to install ActiveX controls, right-click the notification area to display
a menu from which you can select Install ActiveX control.
142 Users Manual
Q3 When you see a Windows Security Alert icon (
of the task bar.
) appear on the right part
With the Security Center feature added, Windows XP SP2 checks the Firewall,
the automatic updates configuration and installation of virus-checking programs
to display a Windows Security Alert icon on the right part of the task bar when it
judges that the computer is vulnerable to attacks from the Internet. In this case,
check the following to install the necessary components.
A1
Set up the Windows Firewall.
When you set up the Windows Firewall, you will be protected from unauthorized
access through the Internet or the network.
1.
Click on Windows Firewall in Start > Control Panel > Security Center > Manage
security settings for.
2.
From the General tab of Windows Firewall, select ON (recommended).
3.
If you want to allow a certain program or service to gain access to your computer
using the Firewall, select and check the program or service that you want to allow
access from, in the Exceptions tab of the Windows Firewall. If you want to add
a program to Programs and Services, click on Add Program and select it.
A2
Set up Windows Automatic Updates.
This automatically downloads and installs critical updates via the Internet to keep
your computer up to date.
1.
Click on Automatic Updates in Start > Control Panel > Security Center > Manage
security settings for.
2.
From general tab of Automatic Updates window, select Automatic
(recommended).
A3
Keep your computer current with the latest virus updates. (ex: Norton Antivirus)
Even when you have installed Norton AntiVirus on your computer, Windows
cannot recognize the program until you configure the settings, displaying a
Security Alert icon.
When you first use or install Norton AntiVirus for the first time, follow the
Registration Wizard steps to configure the registration settings.
To protect your computer from virus attacks with the latest updates, click on
Options to display the Norton AntiVirus Options window. From the left menu of
the window, check Run Automatic Protection to select Automatic Protection and
check Run LiveUpdate to select LiveUpdate.
A4
Two virus scanning programs on one computer may cause system conflicts.
Remove one of the programs from the system.
Troubleshooting 143
A5
If Windows does not recognize the existence of an anti-virus program even when
it has been installed, your computer could be vulnerable to attacks from the
Internet. You should install an anti-virus program that your computer is able to
identify.
Check the following programs which Windows can detect and select one from
the list.
A list of anti-virus programs that Windows can detect:
-Symantec Norton Anti-Virus
-NetworkAssociates (McAfee)
-TrendMicro
-ComputerAssociates
-Panda
-Kaspersky
-Ahnlabs (AhnLab)
The list is subject to change. Visit the Web site (www.microsoft.com) regularly
to check the latest list
144 Users Manual
HDTV Related
The 910GML Chipset model does not support HDTV output.
Q1 On a component TV, the Full Screen DOS Mode screen does not display.
A
A component TV does not support the Full Screen DOS Mode screen due to an
output power problem of the TV. Please use DOS mode in a window when using
a component TV.
Q2 The colors are too blurred.
A
Depending on the model of the TV or the color settings, a specific color may
dominate. Adjust the color settings of the TV.
Q3 When I watch a DVD and the resolution is higher than 540, the screen is not
displayed or an error message appears.
A
The DVD international standard does not support resolutions higher than 480P.
Configure the resolution of the component output mode to lower than 480P.
Q4 How can I configure a component TV device?
(ATI chipset models)
A
1. Right-click over the Desktop and then select Properties.
2. In the [Display Properties] window, select the Settings tab > Advanced > ATI
Display tab.
3. Select the YPbPr item and click the Apply button.
4. Click the YPbPr button and select the appropriate TV type and then click the
Apply button.
(Intel chipset models)
A
Open the Graphics Properties window according to the following procedures.
1. Right-click over the Desktop and then select Graphics Option >Graphics
Properties.
2. Select TV from the Device tab.
3. Select a resolution or type and click the Apply button.
Troubleshooting 145
Q5 The screen does not display on the component TV.
(ATI chipset models)
A
This happens when the TV does not support the component TV mode configured
in the video driver.
1. Click Display Properties > Settings > Advanced > Display tab > YPbPr button.
2. Select the relevant modes (480i, 480p, 540p, 720p,1080i,16:9) and click the
Apply button. (At this time, the mode changes to the highest of the selected
modes depending on the supported modes of the TV.)
3. Double-click the On/Off button of the YPbPr to change to the configured
mode.
4. Click the Apply button.
(Intel chipset models)
A
This happens when the TV does not support the component TV mode configured
in the video driver.
1. Launch the Intel Graphics Properties.
2. Select TV from the Device tab, select a mode (720p,1080i) and click the Apply
button
Q6 When I am watching the screen on a TV using YPbPr, the edges of the screen
are trimmed.
(ATI chipset models)
A
Due to the hardware limit of the current ATI video chipset, a HDTV
Underscanning function is not supported so that edges of the screen are trimmed.
The amount of edges trimmed is determined by the YPbPr mode and the TV type.
(Intel chipset models)
A
Check that ‘Full Screen’ is selected in the Intel graphics properties. This happens
because the current Intel chipset does not support the HDTV Underscanning
function. The amount of edges trimmed is determined by the YPbPr mode and
the TV type.
Q7 I cannot change the display device to the component TV by pressing the
<Fn>+<F4 /
> keys. (ATI chipset models)
A
146 Users Manual
Pressing the <Fn>+<F4 /
> keys does not change the display device to a
component TV because of an output power problem.
Restoring the System
This description is only for models running Window XP.
The System Restore function allows you to restore your computer to an earlier copy
(called restore point), and restores the settings if a problem occurs.The System Restore
function is provided by Windows XP to enable the resolution of various problems
without reinstalling Windows XP completely.
You can use System Restore in the following cases.
•
•
•
•
The system files are deleted or damaged by mistake.
The system is unstable or a problem occurs in a device driver.
A problem occurs after changing system files such as the registry.
A problem occurs after installing a new program.
Creating a Restore Point
Restore points are created at predetermined times and at times of significant system
events such as when a program or a driver is installed. You can also decide when to
create your own restore points.
There has to more than 200MB of free space on the hard disk drive. If the disk
space is insufficient, a saved restore point might be deleted.
You are recommended to create a restore point when you have purchased a
new computer and before installing new programs or device drivers. Before
creating a restore point, check that the computer is operating properly.
The procedures to create your own restore point are described below.
1. Click Start > All Programs > Accessories > System Tools > System Restore.
Troubleshooting 147
2. Select "Create a restore point", and click Next.
Since changes made after the Recovery Point may not be maintained, please
back-up all necessary files to another location before performing system
recovery.
3. In the Restore point description box, type a name to identify the restore point, and
than click Create. A restore point has been created.
Returning your computer to an earlier restore point
The procedures to return your computer to an earlier restore point when a problem has
occurred are described below.
1. Click Start > All Programs > Accessories > System Tools > System Restore.
148 Users Manual
2. Select "Restore my computer to an earlier time", and then click Next.
3. Select the desired restore date from the calendar restoration and select the desired
restore point from the list, and then click Next.
The date of the restore point is displayed in bold font.
4. Confirm the selected restore point and click Next. System Restore shuts down
Windows, and starts the restoration processes.
Troubleshooting 149
5. After the restoration is complete, Windows restarts. In the [System Restore
completed] dialog, click OK.Your computer has been restored to the selected
restore point.
Undoing the last restoration
The procedures to undo a restoration are described below.
1. Click Start > All Programs > Accessories > System Tools > System Restore.
2. Select "Undo my last restoration", and then click Next.
3. Confirm the restoration information to undo, and than click Next. System Restore
shuts down Windows and starts undoing the restoration.
4. After the undo restoration is complete, Windows restarts. In the [Undo the last
restoration completed] dialog, click OK.Your computer has been restored to the
point prior to the last restoration.
150 Users Manual
Reinstalling Software
If you have reinstalled the Windows operating system, or the system and program do
not operate properly, you can re-install the driver and program using the system
software Media.
This computer is optimized for Microsoft Windows XP, therefore driver other
than the ones included in the System Software Media are not provided.
Running the system software Media
Insert the system software Media into the CD-ROM drive. The initial screen appears
automatically.
• Standard Installation: This displays a list of drivers or programs that are not
currently installed on your computer from the system software Media provided.
All necessary components are installed using the factory defaults.
• Minimum Installation: This displays the components (driver, Windows
programs, etc) that, if not installed, may cause problems with the system
performance. You can install only required components.
• Custom Installation: You can customize the installation of drivers and
programs.
Troubleshooting 151
Installing drivers and programs
1. Click Standard Installation in the main window of the System Software Media.
(Standard Installation is recommended)
2. The system is scanned to display the drivers and programs that need to be installed.
3. Click OK. The drivers and programs are automatically installed as factory
defaults.
4. When done, restart the system.
152 Users Manual
Reinstalling Windows XP
If the Windows XP does not operate properly due to an error in the system, or if you
have replaced the hard disk drive, you can reinstall Windows XP using the system
recovery CD.
With the system recovery CD, you can reinstall Windows XP only. To return
the system to the state of shipment, reinstall the device drivers and programs
with the system software Media after reinstalling Windows XP with the system
recovery CD.
Reinstalling Window may delete the data on the hard disk drive such as files,
programs, etc. In order to minimize damage from data loss, please remember
to always back up data. Samsung Electronics is not liable in the case of data
loss, please consult your warranty statement for clarification.
When you have set a booting password
You are asked to enter your booting password after restarting the system
during the Windows installation. Enter the password to continue to the next
steps.
Reinstalling Windows
Explain Standard installation option as a standard.
1. Insert the system recovery CD into the CD-ROM drive.
2. In the initial screen, click Standard Installation.
Troubleshooting 153
• Standard installation: You can change the settings for partitioning, the
installation folder, etc. during the Windows installation. However, reinstalling
Windows may delete the data on the hard disk drive such as files, programs,
etc. In order to minimize damage from data loss, please remember to always
back up data.
• Quick Installation: This re-installs Windows with the user data and the system
configuration intact. The user data in the already existing Windows folders may
be preserved as the existing Windows folders are overwritten.
3. The description for the standard installation appears. Click Yes.
The installation starts, and the system will be restarted after a while.
When Quick Installation is selected,
Setup proceeds with Step 3 before automatically installing Windows. Quick
Installation overwrites the existing Windows version, so that drivers or
applications do not need to be reinstalled.
4. After the system has restarted, the message ’Press any key to boot from CD’
appears. Do not press any key at this time. After a while the partition configuration
screen appears.
To not change the partition, press <Enter>.
What is partition configuration?
Partition configuration is a function that devides the hard disk drive into one or
several partitions. Note that changing the partition deletes all of the data on the
hard disk drive.
5. Select the folder to install the Windows operating system.
To delete the previous version of Windows and install in the current folder, press
<L> on the keyboard.
If you press ESC to select another folder for the installation, new Windows
folders are created causing a risk of dual booting.
6. After the installation process copies the necessary folders for the Windows
installation, restart the system, and the message “Press any key to boot from CD”
is displayed. You do not need to enter anything. In a moment, the Windows XP
installation screen will appear to proceed with the installation.
154 Users Manual
7. When the Regional and Language Options window appears, click Next.
8. When a window that requires your name and organization pops up, enter your
name and the organization and click Next.
In the Windows XP Professional edition, an additional window that requires the
computer name and the administrator password appears.
Enter the computer name and the administrator password and click Next.
9. When the Date and Time Settings window appears, click Next.
Setup will continue.
10. When the system restarts to display Press any key to boot from CD, do not press
any key.
When you see the Windows desktop, this means that the installation process is
completed. Remove the system recovery CD and install the device drivers and
applications from the system software Media.
Troubleshooting 155
If You Cannot Run Windows
If you cannot run Windows, you have to boot the system with the system recovery CD,
and reinstall Windows. If you boot the system from the system recovery CD, you can
install Windows only with the user installation option. You cannot install with the
standard installation option.
1. Insert the system recovery CD into the CD-ROM drive and start the computer.
2. If the following message appears on the screen, press any key from the keyboard.
Press any key to boot from CD.....
This message appears only when the CD drive has booting priority. If the
message does not appear, configure the CD drive as the first booting device
referring to ”Changing Booting Priority” on page 98.
3.
Do not press any key at this time. After a while the partition configuration screen
appears.
To not change the partition, press <Enter>.
4. Select the desired file system ( format ).
To maintain the current file system, press <Enter>.
5. Select the folder to install the Windows operating system.
To delete the previous version of Windows and install in the current folder, press
<L> on the keyboard.
6. After the installation process copies the necessary folders for the Windows
installation, restart the system, and the message “Press any key to boot from CD”
is displayed. You do not need to enter anything. In a moment, the Windows XP
installation screen will appear to proceed with the installation.
7. Follow the instructions of the Windows XP installation wizard to continue with the
installation.
8. When the installation is complete, the computer will restart.
When the system has restarted, the Press any key to boot from CD message
appears. Ignore the message.
The system boots and the Windows and Windows Registration screen appears.
Register Windows, following the instructions to finish the Windows installation.
Remove the System Recovery CD and install the device drivers and application
programs using Standard Installation from the System Software Media.
156 Users Manual
Specifications
System Specification
The system specifications will be described below. The system specifications may
differ depending on the derived models.
Item
Specification
Remarks
CPU
Intel Celeron M 1.3~1.6GHz(FSB400) /
Intel Pentium M 1.6~2.13GHz / Dothan (FSB533)
Optional
Cache memory
1MB (Celeron) / 2MB (Dothan)
Main memory
256/512/1024 MB DDR2 SDRM, 2 DDR2 socket
Max 2GB
Main Chipset
Intel 915GM (Alviso PM) / 915GM (Alviso GM) or 910GML /
82801FBM (ICH6-M)
Optional
Hard disk drive (HDD) 2.5", UltraDMA100, S.M.A.R.T 9.5mmH / SATA
Optional
CD drive
DVD-ROM, CD-RW / DVD-Rom Combo, DVD-Super Multi
Optional
Graphics
ATI Mobility Radeon X300/X600/X700, Memory : 32MB / 64MB /
128MB (Hyper Memory 128MB / 256MB), Intel 915GM / 910GML
Optional
Sound
SoundMAX integrated Digital Audio (AC97 CODEC)
Network Interface
Modem: SENS LT56ADW
Wired LAN: Broadcom 440x 10/100 Intergated Controller
Wireless LAN: 802.11BG or 802.11ABG
Memory Card Slot
Memory Stick, Memory Stick Pro, SD Card, MMC, XD card
Supported
PCMCIA Slot
Type I and II Compatible
Ports
IEEE 1394 (6 Pin), USB2.0 x 4, Microphone, Headphone(S/PDIF
supported), Modem(RJ-11), LAN(RJ-45), Monitor and TV Out(SVideo)
Dimensions (mm)
357.0 x 262.0 x 33.9
WxDxH
LCD Panel Size
15.4" WXGA (1280x800) , 15.4" WSXGA+ (1680x1050)
Optional
Weight
2.89 Kg(15.4" WXGA ATI graphics)
Battery
Lithium-Ion smart battery
Operation
Environment
Temperature (storage) : -5 ~ 40°C (operation) : 10 ~ 32° C
Humidity (storage) : 5% ~ 90%
(operation) : 20% ~ 80%
Operation Voltage
100 - 240 VAC
Frequency
50 - 60 Hz
Output Power
60W / 90W*
Output Voltage
19.0VDC
Optional
The system specifications are subject to change without notice. For detailed system specifications, refer to the product
catalog.
*) Please use only an AC adapter specified in the system specification.
Specifications 157
Wireless LAN Specification (Optional)
Intel(R) PRO/Wireless 2200BG Network Connection
Product Specification
Item
Physical
Specifications
Power Specification
Network
Specifications
Detailed Specifications
Dimensions
(Width X Height) 59.75 X 44.45 mm
operation temperature and
humidity
Same as system operation
Power Saving Mode
135 mW
Receiving Mode
0.85W
Transmission Mode
1.45W
Power
3.3V
Compatibility
IEEE 802.11b, IEEE 802.11g
Operating System
Microsoft Windows XP
- NDIS5 Miniport Driver
Media Access Protocol
CSMA/CA (Collision Avoidance) with
Acknowledgement(ACK)
Security
Wired Equivalent Privacy support (WEP) 64bit/128bit
WPA*, CCX*
Temperature: 0°C ~ 70°C
Humidity: less than 85%
* This piece of equipment supports the Wi-Fi wireless LAN security standard, WPA (Wi-Fi Protected Access) and
CCX (Cisco Compatible eXtensions). To connect to a wireless network consisting of the WPA and CCX,
certificates or PROSet may be required depending on the network settings. For driver update, visit
www.samsung.com and for information on the PROSet installation, refer to ”Wireless Network Setup Using the
Wireless LAN Setup Program (For Intel 802.11BG or Intel 802.11ABG cards)” (p76). For more information, ask
your network administrator.
Radio Specifications
RF Band
2.4GHz
Support Channels
Channels allowed per country.
Device
Transceiver
Standard Output Power
5 mW
Transmission Method
11b mode: DSSS
11g mode: OFDM
Transmission Rate (Mbps) *
11b mode: 11, 5.5, 2, and 1
11g mode** : 54, 48, 36, 24, 18, 12, 9, and 6
Antenna Type
Internal Antenna 2 EA (Main/Aux)
* The transmission rate may differ from the actual transmission rate.
** 11g mode is supported only when the device is connected with an IEEE802.11g device (e.g. IEEE802.11g
compatible Access Point).
158 Users Manual
Intel(R) PRO/Wireless 2915ABG Network Connection
Product Specification
Item
Physical
Specifications
Power Specification
Network
Specifications
Detailed Specifications
Dimensions
(Width X Height) 59.75 X 44.45 mm
operation temperature and
humidity
Same as system operation
Power Saving Mode
135 mW
Receiving Mode
0.85 W
Transmission Mode
1.45 W
Power
3.3V
Compatibility
IEEE802.11a, IEEE802.11b, IEEE802.11g
Operating System
Microsoft Windows XP
- NDIS5 Miniport Driver
Media Access Protocol
CSMA/CA (Collision Avoidance) with
Acknowledgement(ACK)
Security
Wired Equivalent Privacy support (WEP) 64bit / 128bit
WPA*, CCX*
Temperature: 0°C ~ 70°C
Humidity: less than 85%
* This piece of equipment supports the Wi-Fi wireless LAN security standard, WPA (Wi-Fi Protected Access) and
CCX (Cisco Compatible eXtensions). To connect to a wireless network consisting of the WPA and CCX,
certificates or PROSet may be required depending on the network settings. For driver update, visit
www.samsung.com and for information on the PROSet installation, refer to ”Wireless Network Setup Using the
Wireless LAN Setup Program (For Intel 802.11BG or Intel 802.11ABG cards)” (p76). For more information, ask
your network administrator.
Radio Specifications
RF Band
2.4GHz, 5GHz
Support Channels
Channels allowed per country.
Device
Transceiver
Standard Output Power
5 mW
Transmission Method
11a mode: OFDM
11b mode: DSSS
11g mode: OFDM
Transmission Rate (Mbps) *
11a mode**
11b mode: 11, 5.5, 2, and 1
11g mode*** : 54, 48, 36, 24, 18, 12, 9, and 6
Antenna Type
Internal Antenna 2 EA (Main/Aux)
* The transmission rate may differ from the actual transmission rate.
** 11a mode is supported only when the device is connected with an IEEE802.11a device (e.g. IEEE802.11a
compatible Access Point).
***11g mode is supported only when you are connected to an IEEE 802.11g device (e.g. An Access Point
supporting IEEE 802.11g).
Specifications 159
Atheros Wireless Network Adapter Device
Product Specification
Item
Physical
Specifications
Detailed Specifications
Dimensions
(Width X Height) 59.75 X 44.70 mm
operation temperature and
humidity
Same as system operation
Temperature: 0°C ~ 70°C
Humidity: 95%
Power Specification
Network
Specifications
Power Saving Mode
70mW
Receiving Mode
0.825W
Transmission Mode
1.25W
Power
3.3V
Compatibility
IEEE 802.11g, IEEE 802.11b
Operating System
Microsoft Windows XP
- NDIS5 Miniport Driver
Media Access Protocol
CSMA/CA (Collision Avoidance) with
Acknowledgement(ACK)
Security
Wired Equivalent Privacy support (WEP) 64bit / 128bit
*WPA, *CCX
* This piece of equipment supports the Wi-Fi wireless LAN security standard, WPA (Wi-Fi Protected Access) and
CCX (Cisco Compatible eXtensions). To connect to a wireless network consisting of the WPA and CCX,
certificates or Atheros Client Utility may be required depending on the network settings. For more information, ask
your network administrator.
Radio Specifications
RF Band
2.4 GHz
Support Channels
Channels allowed per country.
Device
Transceiver
Modulation Scheme
11b Mode: DSSS, CCK 11g Mode: OFDM
Standard Output Power
MAX 10 mW
*Transmission Rate
**11g mode: 54, 48, 36, 24, 18, 12, 9, 6
11b mode: 11, 5.5, 2, 1
Antenna Type
2ea internal antennas (main and aux)
* The data rate may differ from the real data transmission rate.
**11g mode is supported only when device is connected with an IEEE 802.11g device. (e.g. Access Point
supported IEEE 802.11g)
160 Users Manual
Abbreviations
A . . . . . . . . . Amperes
AC . . . . . . . . Alternating current
ACPI . . . . . . Advanced Configuration and Power management Interface
APM . . . . . . Advanced Power Management
ATA. . . . . . . AT attachment (refers to the hard-drive interface in an ATcompatible computer)
ATAPI. . . . . AT attachment packet interface
BBS . . . . . . . Bulletin board system
BIOS . . . . . . Basic input/output system
C . . . . . . . . . Centigrade
CD . . . . . . . . Compact disc
CD-ROM . . Compact disc read-only memory
cm . . . . . . . . Centimeters
COM . . . . . . Communication (as in communication port)
CMOS . . . . . Complementary metal-oxide semiconductor
DC . . . . . . . . Direct current
DMA . . . . . . Direct memory access
DPMS . . . . . Display power-management signaling
DRAM. . . . . Dynamic random access memory
DSTN . . . . . Double layer super twist nematic
ECP . . . . . . . Extended capabilities port
EPP . . . . . . . Enhanced parallel port
g . . . . . . . . . . gram
G . . . . . . . . . Gravity
GB . . . . . . . . Gigabytes
hr . . . . . . . . . hour
Hz . . . . . . . . Hertz
IDE . . . . . . . Integrated drive electronics
I/O . . . . . . . . Input/output
IRQ . . . . . . . Interrupt request line
Abbreviations 161
ISA . . . . . . . Industry Standard Architecture
KB . . . . . . . . Kilobytes
kg . . . . . . . . . Kilograms
LAN. . . . . . . Local-area network
lb.. . . . . . . . . Pounds
LBA . . . . . . . Logical block addressing
LCD. . . . . . . Liquid-crystal display
m . . . . . . . . . Meters
mA . . . . . . . . Milliampere
mAhr . . . . . . Milliampere hour
MB. . . . . . . . Megabyte
mm . . . . . . . millimeter
MPEG . . . . . Motion Picture Experts Group
MPU . . . . . . Microprocessor unit
ms . . . . . . . . Millisecond
PDF . . . . . . . Portable document format
PC . . . . . . . . Personal computer
PCI . . . . . . . Peripheral component interconnect
PCMCIA. . . Personal Computer Memory Card International Association
POST. . . . . . Power-on self-test
PNP . . . . . . . Plug and play
PS/2 . . . . . . . Personal System/2
RAM . . . . . . Random-access memory
ROM . . . . . . Read-only memory
SVGA . . . . . Super video graphics array
TFT . . . . . . . Thin-film transistor
USB . . . . . . . Universal serial bus
V . . . . . . . . . Volt
VAC . . . . . . Voltage alternating current
VCC . . . . . . Voltage collector current
VDC . . . . . . Voltage direct current
whr . . . . . . . Watt hour
162 Users Manual
Glossary
AC adapter
The AC (or alternating current) adapter regulates current coming into your
computer from the wall outlet. The current at the wall outlet is alternating current
and needs to be changed by the adapter to DC (direct current) before your
computer can use it for power.
ACPI
ACPI (Advanced Configuration and Power Interface)- a method for describing
hardware interfaces in terms abstract enough to allow flexible and innovative
hardware implementations and concrete enough to allow shrink-wrap OS code to
use such hardware interfaces.
BIOS
BIOS stands for basic input/output system. The BIOS is software (often called
firmware) that is independent of any operating system. It enables the computer to
communicate with the screen, keyboard, and other peripheral devices without
using programs on the hard disk.
The BIOS on your computer is flash BIOS, which means that it has been recorded
on a flash memory chip that can be updated if needed.
Boot
To start your computer. A cold boot resets the entire computer and runs through
all computer self-tests. A warm boot clears out computer memory only.
Boot disk
A disk containing operating system programs required to start your computer. A
boot disk can be a floppy disk, hard drive, or compact disc.
Byte
The basic unit of measure for computer memory. A character—such as a letter of
the alphabet—uses one byte of memory. Computer memory is often measured in
kilobytes (1,024 bytes) or megabytes (1,048,576 bytes).
Each byte is made up of eight bits. For more information on bytes and bits, see an
introductory book on computers.
Cache memory
Cache is very fast, zero-wait-state memory located between the microprocessor
and main memory. Cache reduces the average time required by the
microprocessor to get the data it needs from the main memory by storing recently
accessed data in the cache.
Glossary 163
CardBus
CardBus technology enables the computer to use 32-bit PC Cards. Hardware in
the computer and the Windows operating system provide support for the 32-bit
cards. The voltage of 32-bit cards (3.3 volts) is lower than that of 16-bit cards (5
volts). The 32-bit cards can transmit more data at a time than the 16-bit cards, thus
increasing their speed.
CMOS memory
CMOS (complementary metal oxide semiconductor) memory is powered by the
CMOS battery. The System Setup settings and other parameters are maintained in
CMOS memory. Even when you turn your computer off, the information in
CMOS memory is saved.
COM port
COM stands for communication. COM ports are the serial ports in your computer.
Compact Disc
A compact disc (CD).
Conventional memory
The first 640 KB of system memory. Operating systems and application programs
can directly access this memory without using memory-management software.
Disk
The device used by the computer to store and retrieve information. Disk can refer
to a floppy disk, hard disk, or RAM disk.
Disk cache
A software device that accumulates copies of recently used disk sectors in RAM.
The application program can then read these copies without accessing the disk.
This, in turn, speeds up the performance of the application.
A cache is a buffer for transferring disk sectors in and out of RAM. Data stored in
a disk cache is a copy of data already stored on the physical disk.
DMA (direct memory access)
A method of transferring data from a device to memory without having the data
pass through the microprocessor. Using DMA can speed up system performance.
DPMS
Display Power Management Signalling. Displays or monitors that comply with
this can be managed by the Power Management features found in the system
setup.
Floppy disk
A removable disk, also called floppy or diskette.
164 Users Manual
Hard drive
Also called fixed disk. A hard drive is connected to the computer and can be
installed or removed. Data written to a hard drive remains until it is overwritten
or corrupted.
The 2.5-inch hard drive in your computer was designed for use in a notebook
computer. Because hard drives in notebook computers are smaller than those in
desktop computers, their maximum storage capacity may be less than that of
desktop hard drives. However, because of their smaller size, the drives handle
shock and vibration better than larger drives, which is important for a notebook
computer.
I/O
Input/output. Refers to peripheral devices, such as printers, that are addressed
through an I/O address.
I/O address
I/O stands for input/output. Peripheral devices, such as printers, are addressed
through the I/O port address.
IRQ (interrupt request line)
The IRQ is a hardware line that a device uses to signal the microprocessor when
the device needs the microprocessor’s services. The number of IRQs is limited by
industry standards.
LCD (liquid-crystal display)
The LCD screen on your computer differs from the display screen of a desktop
monitor. Most desktop monitors use CRT (cathode-ray tube) displays, which
work by moving an electron beam across phosphor dots on the back of the screen.
The phosphor dots light up to show the image. LCDs use a liquid-crystal solution
between two sheets of polarizing material. Electric current passing through the
liquid aligns the crystals so that light can or cannot pass through them, creating an
image.
MB (megabyte)
1,024 kilobytes.
Megabit
1,048,576 bits or about 128 kilobytes.
Operating system
A program that supervises the computer's operation, including handling I/O.
Application programs and users can request operating-system services. A user
might request operation-system services to copy files or format a disk. An
application program might use the operating system to obtain keyboard input,
write data to a file, or write data to a screen.
Glossary 165
PC Card
PC Card stands for personal computer card. The Personal Computer Memory
Card International Association (PCMCIA) defines the standards used to develop
all PC Cards. PC Card types include: modems, Ethernet adapters, SCSI adapters,
ATA cards, and memory cards.
PC slot
The PC slot is the hardware slot in the computer where the PC Card is placed.
Pixel
A pixel is an individual dot in a graphic displayed on your computer. The pixels
are so close together that they look as though they are connected. An LCD screen
displays thousands or millions of pixels.
Plug and Play
A plug and play operating system automatically configures computer components
to work with your system. With this type of operating system, you normally do
not need to set jumpers on devices or set memory addresses or IRQs.
RAM (random access memory)
The computer's system memory, including conventional and extended memory.
You can write to and read from RAM. Information stored in RAM is temporary,
and is erased when the system is turned off.
Refresh rate
The refresh rate is the rate at which the image on the LCD screen is rewritten to
the screen. A fast refresh rate helps keep the image from flickering.
Resolution
The resolution is the sharpness or clarity of the image on your LCD screen.
Resolution is measured by the number of pixels the computer’s screen can
display. For example, a resolution of 800 x 600 means that the screen can display
800 pixels in row and can display 600 rows. The more pixels displayed, the higher
the resolution and the better the image.
ROM (read-only memory)
Permanent computer memory dedicated to a particular function. For example, the
instructions for starting the computer when you first turn on power are contained
in ROM. You cannot write to ROM. (ROM is not the same as RAM).
Sector
Also known as disk sector. The portion of a track that is numbered and can hold
a specified number of characters (usually 512 KB).
166 Users Manual
Shadow RAM
A write-protected area of RAM that contains a copy of the BIOS. As the computer
boots, the BIOS is copied from its permanent location in ROM to RAM. The
BIOS can be executed much faster in RAM than in ROM. The BIOS remains in
shadow RAM until you turn off the computer.
TFT (thin film transistor) LCD
A TFT LCD uses a separate transistor circuit to control each pixel. This
technology provides the best resolution for an LCD screen. A TFT LCD is also
sometimes called an active matrix LCD.
Glossary 167
R50 1.1
»ÃСÒÈ
ËéÒÁäÁèãËé·Ó«éÓÊèǹ˹Öè§Êèǹ㴢ͧàÍ¡ÊÒùÕé ºÑ¹·Ö¡äÇéã¹Ãкº·ÕèÊÒÁÒö¹Ó¡ÅѺÁÒãªéä´éãËÁè ËÃ×ÍÊ觵èÍä´éäÁèÇèÒ¨Ðà»ç¹ ÃٻẺ
ËÃ×ÍÇÔ¸Õ¡ÒÃã´æ äÁèÇèÒ¨Ðãªé¡Åä¡ ¡ÒöèÒÂàÍ¡ÊÒà ¡Òúѹ·Ö¡äÇéËÃ×Í´éÇÂÇÔ¸Õ¡ÒÃÍ×è¹æ â´ÂäÁèä´éÃѺ¡ÒÃ͹Ø−Òµà»ç¹ÅÒÂÅѡɳìÍÑ¡ÉÃ
¨Ò¡ºÃÔÉÑ·¼Ùé¼ÅÔµ
¢éÍÁÙÅ㹤ÙèÁ×͹ÕéÍÒ¨ÁÕ¡ÒÃà»ÅÕè¹á»Å§â´ÂäÁèµéͧá¨é§ãËé·ÃÒºÅèǧ˹éÒ
ºÃÔÉÑ·¼Ùé¼ÅÔµäÁè¢ÍÃѺ¼Ô´ªÍºã¹¤ÇÒÁ¼Ô´¾ÅÒ´·Ò§à·¤¹Ô¤ËÃ×ͨҡ¡ÒÃá¡éä¢ËÃ×Í¡ÒâҴËÒÂ仢ͧà¹×éÍËÒ㹤ÙèÁ×͹Õé ÊÓËÃѺ¤ÇÒÁ
àÊÕÂÍÒ¨·ÕèÍÒ¨à¡Ô´¢Öé¹ËÃ×Íà¡Ô´¢Öé¹ÀÒÂËÅѧ·Õèà»ç¹¼ÅÁÒ¨Ò¡
¡ÒûÃѺáµè§ »ÃÐÊÔ·¸ÔÀÒ¾ËÃ×Í¡ÒÃãªéàÍ¡ÊÒùÕé
Microsoft Windows ¤×Íà¤Ã×èͧËÁÒ¡ÒäéÒ¨´·ÐàºÕ¹¢Í§ Microsoft Corporation
ª×èͼÅÔµÀѳ±ìµèÒ§æ ·ÕèÃкØäÇéã¹·Õè¹Õé ãªéÊÓËÃѺ¡ÒÃÃкض֧à·èÒ¹Ñé¹áÅÐÍÒ¨ÁÕ¡ÒáÅèÒǶ֧à¤Ã×èͧËÁÒ¡ÒäéÒ áÅÐ/ËÃ×Íà¤Ã×èͧËÁÒÂ
¡ÒäéÒ¨´·ÐàºÕ¹¢Í§ºÃÔÉÑ·à¨éҢͧ¼ÅÔµÀѳ±ì
»ÃСÒȨҡ Macrovision
ËÒ¡¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³ÁÕä´Ã¿ì DVD áÅоÍÃìµá͹ÒÅçÍ¡ TV Out ãËé´Ù¢éÍÁÙŵèÍ仹Õé:
ÍØ»¡Ã³ì¹ÕéÁÕà·¤â¹âÅÂÕ»éͧ¡Ñ¹¡ÒÃÅÐàÁÔ´ÅÔ¢ÊÔ·¸Ôì «Öè§ä´éÃѺ¡ÒäØéÁ¤Ãͧâ´Â¡ÃÃÁÇÔ¸Õ«Öè§ÁÕ¡Òè´·ÐàºÕ¹ÊÔ·¸ÔºÑµÃ áÅÐÁÕÊÔ·¸Ôã¹
·ÃѾÂìÊÔ¹·Ò§»Ñ−−ÒÍ×è¹æ ·Õèà»ç¹¢Í§ Macrovision Corporation áÅкؤ¤ÅÍ×è¹·Õèà»ç¹à¨éҢͧ ¡ÒÃãªéà·¤â¹âÅÂÕ»éͧ¡Ñ¹¡ÒÃÅÐàÁÔ´
ÅÔ¢ÊÔ·¸Ôì¹Õé¨Ðµéͧä´éÃѺ¡ÒÃ͹ØÁѵÔâ´Â Macrovision Corporation áÅÐãªéÊÓËÃѺ¡ÒÃãªé§Ò¹ã¹ºéÒ¹ áÅСÒÃÃѺªÁÍÂèÒ§¨Ó¡Ñ´à·èÒ¹Ñé¹
¡àÇé¹·Õèä´éÃѺ͹Ø−Òµâ´Â Macrovision Corporation ËéÒÁÂé͹¡Ãкǹ¡ÒüÅÔµËÃ×Ͷʹ»ÃСͺÍØ»¡Ã³ì¹Õé
ÅÔ¢ÊÔ·¸Ôì 2003 ʧǹÅÔ¢ÊÔ·¸Ôì·Ñé§ËÁ´
»ÃСÒÈ i
¢éÍÁÙÅÊÓ¤Ñ−à¡ÕèÂǡѺ¡ÒÃÃÑ¡ÉÒ¤ÇÒÁ»ÅÍ´ÀÑÂ
¤Óá¹Ð¹Óà¾×èͤÇÒÁ»ÅÍ´ÀÑÂ
Ãкº¢Í§¤Ø³ä´éÃѺ¡ÒÃÍ͡ẺáÅз´Êͺà¾×èÍãËéµÃ§µÒÁÁҵðҹÅèÒÊØ´à¡ÕèÂǡѺ¤ÇÒÁ»ÅÍ´ÀÑ¢ͧÍØ»¡Ã³ìÊÒÃʹà·È
ÍÂèÒ§äáçµÒÁ à¾×èÍãËéá¹èã¨ÇèÒ¨ÐãªéÍØ»¡Ã³ì¹Õéä´éÍÂèÒ§»ÅÍ´ÀÑ µéͧ·ÓµÒÁ¤Óá¹Ð¹Óà¾×èͤÇÒÁ»ÅÍ´ÀÑ·ÕèÃкØäÇé·Õè¼ÅÔµÀѳ±ì
áÅÐã¹àÍ¡ÊÒäÙèÁ×Í·ÕèãËéÁÒ
¡ÃسҷӵÒÁ¤Óá¹Ð¹ÓàËÅèÒ¹Õéà¾×èͪèÇ»éͧ¡Ñ¹¡ÒÃä´éÃѺºÒ´à¨çºáÅСÒÃà¡Ô´¤ÇÒÁàÊÕÂËÒ¡Ѻà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì
i
¡ÒõԴµÑé§Ãкº
• ÍèÒ¹áÅл¯ÔºÑµÔµÒÁ¤Óá¹Ð¹Ó·ÕèÃкØäÇé·Õè¼ÅÔµÀѳ±ìáÅÐã¹àÍ¡ÊÒäÙèÁ×Í¡è͹·Õè¨ÐàÃÔèÁãªéà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³ à¡çº¤Ó
á¹Ð¹Óà¾×èͤÇÒÁ»ÅÍ´ÀÑÂáÅФÓá¹Ð¹Ó㹡ÒÃãªéÍØ»¡Ã³ìà¾×èÍãªéã¹Í¹Ò¤µ
•
•
•
•
ËéÒÁãªé¼ÅÔµÀѳ±ì¹Õéã¡Åé¹éÓËÃ×ÍáËÅ觤ÇÒÁÃé͹àªè¹ ËÁé͹éÓ
µÔ´µÑé§à¤Ã×èͧº¹¾×é¹·ÕèÁÕ¼ÔÇÃÒº
µéͧãªéà¤Ã×èͧ¡ÑºáËÅ觨èÒÂä¿·ÕèÃкØäÇé㹩ÅÒ¡ÃкØáç´Ñ¹ä¿¿éÒà·èÒ¹Ñé¹
µÃǨ´ÙãËéá¹èã¨ÇèÒàµéÒàÊÕº俷Õè¤Ø³¨Ðãªé¨èÒÂä¿ãËé¡Ñºà¤Ã×èͧ¢Í§¤Ø³ÊÒÁÒö¶Ö§ä´é§èÒÂ㹡óշÕèà¡Ô´ä¿äËÁéËÃ×Íà¡Ô´¡ÒÃ
ÅѴǧ¨Ã
• ËÒ¡à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³ÁÕÊÇÔµªìàÅ×Í¡áç´Ñ¹ä¿¿éÒ µÃǨ´ÙãËéá¹èã¨ÇèÒµÓá˹觢ͧÊÇÔµªìµÃ§¡ÑºµÓá˹觷Õè¶Ù¡µéͧ
• ªèͧà»Ô´ã¹à¤Ê¤ÍÁ¾ÔÇàµÍÃìãªéÊÓËÃѺÃкÒÂÍÒ¡ÒÈ ËéÒÁ¡Õ´¢ÇÒ§ËÃ×ͻԴªèͧà»Ô´àËÅèÒ¹Õé µÃǨ´ÙãËéá¹èã¨ÇèҤسàµÃÕÂÁ
¾×é¹·ÕèäÇé¾Íà¾Õ§ ÍÂèÒ§¹é͵éͧàÇé¹ÃÐÂÐâ´ÂÃͺ 6 ¹ÔéÇ (15 ૹµÔàÁµÃ) Ãͺà¤Ã×èͧÊÓËÃѺ¡ÒÃÃкÒÂÍÒ¡ÒÈàÁ×èͤسµÔ´µÑé§
à¤Ã×èͧ
ËéÒÁÊÍ´Çѵ¶Øã´æ ŧ㹪èͧà»Ô´ÊÓËÃѺÃкÒÂÍÒ¡ÒȢͧà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃìà»ç¹Íѹ¢Ò´
• µÃǨ´ÙÇèҾѴÅÁÃкÒÂÍÒ¡ÒÈ´éÒ¹ÅèÒ§à¤ÊäÁè¶Ù¡»Ô´¡Ñé¹µÅÍ´àÇÅÒ ËéÒÁÇÒ§à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃ캹¾×é¹¼ÔÇ·Õè¹ØèÁ à¹×èͧ¨Ò¡
¡Ò÷Óàªè¹¹Ñ鹨зÓãËéªèͧÃкÒÂÍÒ¡Òȶ١»Ô´¡Ñé¹
• ËÒ¡¤Ø³ãªé»ÅÑê¡ÊÒÁµÒà¾×è͵è͡Ѻà¤Ã×èͧ ãËéµÃǨ´ÙÇèҨӹǹáÍÁá»ÃìÃÇÁ¢Í§¼ÅÔµÀѳ±ìµèÒ§æ ·ÕèàÊÕºŧ㹻ÅÑê¡
ÊÒÁµÒäÁèà¡Ô¹áÍÁá»ÃìÊÙ§ÊØ´¢Í§»ÅÑê¡·Õèãªé
ii Users Manual
¡ÒôÙáÅÃÐËÇèÒ§¡ÒÃãªé§Ò¹
• ËéÒÁàËÂÕºÊÒÂä¿ËÃ×ÍËéÒÁäÁèãËéÁÕÊÔ觢ͧÇÒ§·ÑºÊÒÂä¿
• ËéÒÁãËé¢Í§àËÅÇã´æ ˡôà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³ ÇÔ¸Õ¡Ò÷Õè´Õ·ÕèÊش㹡Òûéͧ¡Ñ¹¢Í§Ë¡Ã´à¤Ã×èͧ¤×Í¡ÒÃäÁè
ÃѺ»ÃзҹÍÒËÒÃËÃ×Í´×èÁà¤Ã×èͧ´×èÁã¡Åéà¤Ã×èͧ
• à¤Ã×èͧºÒ§à¤Ã×èͧÍÒ¨ÁÕẵàµÍÃÕè CMOS ·ÕèÊÒÁÒö¶Í´à»ÅÕè¹ä´éº¹àÁ¹ºÍÃì´ ÍÒ¨à¡Ô´ÍѹµÃÒ¨ҡ¡ÒÃÃÐàºÔ´ä´é
•
•
ËÒ¡¡ÒÃà»ÅÕè¹ẵàµÍÃÕè CMOS äÁè¶Ù¡µéͧ ãËéà»ÅÕè¹ẵàµÍÃÕèẺà´ÔÁËÃ×ÍẺ·Õèà·Õºà·èÒ
«Öè§ä´éÃѺ¡ÒÃá¹Ð¹Ó¨Ò¡ºÃÔÉÑ·¼Ùé¼ÅÔµ
¡Ó¨Ñ´áºµàµÍÃÕèµÒÁ¤Óá¹Ð¹Ó¢Í§ºÃÔÉÑ·¼Ùé¼ÅÔµ ËÒ¡µéͧà»ÅÕè¹ẵàµÍÃÕè CMOS µéͧá¹èã¨ÇèÒ¼Ùé·Õè¨Ð·Ó¡ÒÃà»ÅÕè¹ãËé
à»ç¹ªèÒ§·Õèä´éÃѺ¡ÒÃÃѺÃͧà·èÒ¹Ñé¹
¢³Ð·Õè»Ô´à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì ¨ÐÂѧ¤§ÁÕ¡ÃÐáÊä¿¿éÒ»ÃÔÁÒ³àÅ硹éÍÂäËÅàÇÕ¹ÍÂÙèã¹à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì à¾×èÍËÅÕ¡àÅÕ觡ÒÃ
à¡Ô´ä¿¿éÒªç͵ ãËé¶Í´»ÅÑê¡ÊÒÂà¤àºÔÅÍÍ¡·Ø¡¤ÃÑé§ ¶Í´áºµàµÍÃÕèáÅÐÊÒÂà¤àºÔÅâÁà´çÁ¨Ò¡àµéÒàÊÕº·Õ輹ѧ¡è͹
·Ó¤ÇÒÁÊÐÍÒ´à¤Ã×èͧ
¶Í´»ÅÑꡢͧà¤Ã×èͧÍÍ¡¨Ò¡àµéÒàÊÕº·Õ輹ѧáÅйÓ仫èÍÁ¡ÑºªèÒ§·Õèä´éÃѺ¡ÒÃÃѺÃͧËÒ¡:
– ÊÒÂä¿ËÃ×Í»ÅÑê¡à¡Ô´¤ÇÒÁàÊÕÂËÒÂ
– ÁբͧàËÅÇˡôà¤Ã×èͧ
– à¤Ã×èͧäÁèÊÒÁÒö·Ó§Ò¹µÒÁ»¡µÔ·Ñ駷Õèãªé§Ò¹µÒÁ¤Óá¹Ð¹ÓáÅéÇ
– ·Óà¤Ã×èͧµ¡ËÃ×Íà¤Êä´éÃѺ¤ÇÒÁàÊÕÂËÒÂ
– »ÃÐÊÔ·¸ÔÀÒ¾¢Í§à¤Ã×èͧà»ÅÕè¹ä»
¤Óá¹Ð¹ÓÊÓËÃѺ¡ÒÃãªé NotePC ÍÂèÒ§»ÅÍ´ÀÑÂ
1. ¢³ÐµÔ´µÑé§áÅÐãªé§Ò¹ÍØ»¡Ã³ì â»Ã´»¯ÔºÑµÔµÒÁ¢éÍ¡Ó˹´¢Í§¤ÙèÁ×ͼÙéãªé
2. â»Ã´ãªé§Ò¹ÃèÇÁ¡ÑºÍØ»¡Ã³ì·ÕèÃкØäÇéã¹¢éÍÁÙŨÓà¾Òдéҹ෤¹Ô¤ÊÓËÃѺÍØ»¡Ã³ìà·èèÒ¹Ñé¹
3. ¢³Ðãªé§Ò¹ÍØ»¡Ã³ì â»Ã´»¯ÔºÑµÔµÒÁ¢éÍ¡Ó˹´àº×éͧµé¹
4. ËÒ¡ÍØ»¡Ã³ìà¡Ô´¢éͺ¡¾Ãèͧ (ÁÕ¡ÅÔè¹äËÁé ¤Çѹ ÏÅÏ) â»Ã´¶Í´»ÅÑê¡ä¿¢Í§ÍØ»¡Ã³ìÍÍ¡¨Ò¡áËÅ觨èÒÂ俷ѹ·Õ
áÅÐËéÒÁµèÍ»ÅÑê¡ä¿¨¹¡ÇèÒ¨ÐÁÕ¡ÒëèÍÁá«Á
5. â»Ã´ãËéªèÒ§¼ÙéàªÕèÂǪÒ−¢Í§¼Ùé¼ÅÔµà»ç¹¼Ùé«èÍÁºÓÃاÍØ»¡Ã³ì
¼ÙéÍӹǡÒôéҹ෤¹Ô¤¢Í§ÈÙ¹ÂìºÃÔ¡ÒÃ
¡ÒÃà»ÅÕè¹ÍÐäËÅèáÅÐÍØ»¡Ã³ìàÊÃÔÁ
ãªé੾ÒÐÍÐäËÅèáÅÐÍØ»¡Ã³ìàÊÃÔÁ·Õèä´éÃѺ¡ÒÃá¹Ð¹Óâ´Â¼Ùé¼ÅÔµà·èÒ¹Ñé¹
¡ÒÃÅ´¤ÇÒÁàÊÕ觢ͧ¡ÒÃà¡Ô´ä¿ãËÁè ãËéãªé੾ÒÐÊÒÂÊ×èÍÊÒÃàºÍÃì 26 AWG ËÃ×ÍãË−è¡ÇèÒ
¢éÍÁÙÅÊÓ¤Ñ−à¡ÕèÂǡѺ¡ÒÃÃÑ¡ÉÒ¤ÇÒÁ»ÅÍ´ÀÑ iii
ËéÒÁãªéà¤Ã×èͧ㹾×é¹·Õè·ÕèÃкØÇèÒÍÒ¨à¡Ô´ÍѹµÃÒÂä´é â´Â¾×é¹·Õè´Ñ§¡ÅèÒÇ ¤Ãͺ¤ÅØÁ¶Ö§¾×é¹·ÕèÊÓËÃѺ´ÙáżÙé»èÇÂ
ã¹âç¾ÂÒºÒÅËÃ×ͤÅÔ¹Ô¤·Ñ¹µ¡ÃÃÁ ÊÀÒÇзÕèÁÕÍÍ¡«ÔਹÁÒ¡ËÃ×Íã¹¾×é¹·Õè¢Í§âç§Ò¹ÍصÊÒË¡ÃÃÁ
Written by: Daryl L. Osden
¡ÒáӨѴẵàµÍÃÕè
ËéÒÁ·Ôé§áºµàµÍÃÕèẺªÒÃ쨻ÃШØãËÁèä´é ËÃ×ͼÅÔµÀѹ±ì·Õèãªé¾Åѧ§Ò¹¨Ò¡áºµàµÍÃÕèẺäÁèÊÒÁÒö
¶Í´à»ÅÕè¹ä´é»Ð»¹¡Ñº¢ÂÐÍ×è¹æ
µÔ´µèÍÊÒÂãËé¤Ó»ÃÖ¡ÉҢͧ Samsung (Samsung Helpline) ÊÓËÃѺ¢éÍÁÙŶ֧ÇÔ¸Õ¡ÒáӨѴẵàµÍÃÕè·Õè¤Ø³äÁèÊÒÁÒö
ãªé§Ò¹ËÃ×ͪÒÃ쨻ÃШØà¾ÔèÁä´éÍÕ¡
»¯ÔºÑµÔµÒÁ¢éͺѧ¤Ñºã¹¡ÒáӨѴẵàµÍÃÕèà¡èÒ
¤ÇÒÁ»ÅÍ´ÀÑÂ㹡ÒÃãªéàÅà«ÍÃì
à¤Ã×èͧ·Ñé§ËÁ´·ÕèÁÕ¡ÒõԴµÑé§ä´Ã¿ì CD ËÃ×Í DVD ·Õèä´éÁҵðҹ¤ÇÒÁ»ÅÍ´ÀѵèÒ§æ ÃÇÁ·Ñé§ IEC 825 ÍØ»¡Ã³ìàÅà«ÍÃìã¹à¤Ã×èͧ
àËÅèÒ¹Õé¨Ñ´à»ç¹ ÒÍØ»¡Ã³ìàÅà«ÍÃì ¤ÅÒÊ 1Ó µÒÁÁҵðҹ»ÃÐÊÔ·¸ÔÀÒ¾¡ÒÃá¼èÃѧÊբͧ US Department of Health and Human
Services (DHHS) ËÒ¡µéͧ«èÍÁÍØ»¡Ã³ì´Ñ§¡ÅèÒÇ ãËéµÔ´µèÍÈÙ¹ÂìºÃÔ¡Ò÷Õèä´éÃѺ¡ÒÃáµè§µÑé§
ËÁÒÂà˵Øà¡ÕèÂǡѺ¤ÇÒÁ»ÅÍ´ÀÑ¢ͧàÅà«ÍÃì:
¡ÒÃãªé»ØèÁ¤Çº¤ØÁµèÒ§æ ËÃ×Í¡ÒûÃѺµèÒ§æ ËÃ×Í»ÃÐÊÔ·¸ÔÀҾ㹡Ò÷ӧҹµèÒ§æ ¹Í¡¨Ò¡·Õèä´éÃкØäÇé㹤ÙèÁ×͹ÕéÍÒ¨
Ê觼ÅãËéà¡Ô´ÍѹµÃÒ¨ҡ¡ÒÃá¼èÃѧÊÕä´é à¾×èÍ»éͧ¡Ñ¹¡ÒáÃШÒ¢ͧáʧàÅà«ÍÃì ËéÒÁ¾ÂÒÂÒÁà»Ô´ä´Ã¿ì CD ËÃ×Í
DVD
¤ÇÒÁµéͧ¡ÒÃà¡ÕèÂǡѺªØ´ÊÒÂä¿
ªØ´ÊÒÂä¿ (»ÅÑê¡àÊÕº¼¹Ñ§, à¤àºÔÅáÅлÅÑê¡ÍÐá´»àµÍÃì AC) ·Õè¤Ø³ä´éÃѺÁҡѺ¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³µÃ§µÒÁ¤ÇÒÁµéͧ¡ÒÃÊÓËÃѺ
¡ÒÃãªé§Ò¹ã¹»ÃÐà·È·Õè¤Ø³«×éÍà¤Ã×èͧÁÒ
ªØ´ÊÒÂä¿ÊÓËÃѺãªéã¹»ÃÐà·ÈÍ×è¹æ µéͧµÃ§¡Ñº¤ÇÒÁµéͧ¡Òâͧ»ÃÐà·È·Õè¤Ø³¨Ð¹Óà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃìä»ãªé ÊÓËÃѺ¢éÍÁÙÅ
à¾ÔèÁàµÔÁà¡ÕèÂǡѺ¤ÇÒÁµéͧ¡ÒâͧªØ´ÊÒÂä¿ â»Ã´µÔ´µè͵ÑÇá·¹¨Ó˹èÒ·Õèä´éÃѺ¡ÒÃáµè§µÑ駢ͧ¤Ø³, ÃéÒ¹¤èÒËÃ×ÍÈÙ¹ÂìºÃÔ¡ÒÃ
¤ÇÒÁµéͧ¡Ò÷ÑèÇä»
¤ÇÒÁµéͧ¡ÒõèÍ仹Õéãªéä´é¡Ñº·Ø¡»ÃÐà·È:
• ¤ÇÒÁÂÒǢͧªØ´ÊÒÂ俵éͧÁÕ¤ÇÒÁÂÒÇÍÂèÒ§¹éÍ 6.00 ¿Øµ (1.8 àÁµÃ) áÅФÇÒÁÂÒÇÊÙ§ÊØ´ 9.75 ¿Øµ (3.0 àÁµÃ)
• ªØ´ÊÒÂä¿·Ñé§ËÁ´µéͧä´éÃѺ¡ÒÃÃѺÃͧâ´ÂµÑÇá·¹·ÕèÃѺ¼Ô´ªÍºã¹¡ÒõÃǨÊͺ㹻ÃÐà·È«Ö觨ÐãªéªØ´ÊÒÂ俹Ñé¹
• ªØ´ÊÒÂ俵éͧÁÕ¤ÇÒÁ¨Ø¡ÃÐáÊä¿ÍÂèÒ§¹éÍ 7 áÍÁá»ÃìáÅÐáç´Ñ¹ä¿¿éÒÃÐºØ 125 ËÃ×Í 250 âÇŵì AC µÒÁ¤ÇÒÁ
µéͧ¡ÒâͧÃкºä¿¿éÒã¹»ÃÐà·È¹Ñé¹
iv Users Manual
• »ÅÑꡢͧÍØ»¡Ã³ìµéͧµÃ§µÒÁ¤Í¹¿Ô¡¡Ùàêѹ¢Í§Áҵðҹ EN 60 320/IEC 320 Standard Sheet C7 ÊÓËÃѺ¡Òûé͹ä¿
à¢éÒà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì
¢éÍÁÙÅÊÓ¤Ñ−à¡ÕèÂǡѺ¡ÒÃÃÑ¡ÉÒ¤ÇÒÁ»ÅÍ´ÀÑ v
ÃÒÂÅÐàÍÕ´à¡ÕèÂǡѺ¢éͺѧ¤ÑºµèÒ§æ
¤Óá¹Ð¹ÓÊÓËÃѺ¡ÒÃãªé§Ò¹ÃкºäÇÃìàÅÊ
ÍØ»¡Ã³ìÃкº LAN Ê×èÍÊÒôéǤÅ×è¹ÇÔ·ÂØ ¾Åѧ§Ò¹µèÓ (ÍØ»¡Ã³ìÊ×èÍÊÒÃäÇÃìàÅÊ´éǤÅ×蹤ÇÒÁ¶ÕèÇÔ·ÂØ (RF)) ·Ó§Ò¹´éǤÇÒÁ¶Õè
2.4 ¡Ô¡ÐàÎÔÃ쵫ì ÍÒ¨¾ºä´éã¹ à¤Ã×èͧâ¹éµºØꤢͧ¤Ø³ ÊèǹµèÍ仹Õéà»ç¹¢éÍÁÙÅ·ÑèÇä»·Õèµéͧ¾Ô¨ÒóÒàÁ×èÍãªé§Ò¹ÍØ»¡Ã³ìäÇÃìàÅÊ
¢éͨӡѴà¾ÔèÁàµÔÁ, ¤Óàµ×͹áÅÐÊÔ觷Õèµéͧ¤Ó¹Ö§¶Ö§ÊÓËÃѺáµèÅлÃÐà·ÈÁÕ¡ÒÃáÊ´§äÇéã¹Êèǹ¢Í§áµèÅлÃÐà·È (ËÃ×ÍÊèǹ
¡ÅØèÁ»ÃÐà·È) ÍØ»¡Ã³ìäÇÃìàÅÊã¹à¤Ã×èͧ¢Í§¤Ø³ãªéÊÓËÃѺ㹻ÃÐà·È·ÕèÁÕ¡ÒÃÃкصÒÁ©ÅÒ¡ÃѺÃͧ¡ÒÃãªéÊÑ−−Ò³ÇÔ·ÂØ (Radio
Approval Marks) ·ÕèµÔ´äÇéã¹à¤Ã×èͧà·èÒ¹Ñé¹ ËÒ¡äÁè»ÃÒ¡¯ÃÒª×èͧ͢»ÃÐà·È·Õè¤Ø³¨Ð¹ÓÍØ»¡Ã³ìäÇÃìàÅÊä»ãªé â»Ã´µÔ´µèÍ˹èǧҹ
à¡ÕèÂǡѺ¤Å×蹤ÇÒÁ¶ÕèÇÔ·ÂØà¾×èÍÊͺ¶ÒÁ¢éÍÁÙÅ ÍØ»¡Ã³ìäÇÃìàÅÊà»ç¹ÍØ»¡Ã³ì·Õèä´éÃѺ¡ÒäǺ¤ØÁÍÂèÒ§ã¡ÅéªÔ´áÅÐÍÒ¨äÁèä´éÃѺ
͹Ø−ÒµãËéãªé§Ò¹
à¾ÒàÇÍÃìàÍÒµì¾Øµ¢Í§ÍØ»¡Ã³ìäÇÃìàÅÊËÃ×ÍÍØ»¡Ã³ì·ÕèÍÒ¨µÔ´µÑé§ÁÒã¹à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃìâ¹éµºØꤢͧ¤Ø³ÁÕÃдѺ¡ÒÃÊ觤Å×è¹
¤ÇÒÁ¶ÕèÇÔ·ÂØ RF µèÓ¡ÇèÒ¢Õ´¨Ó¡Ñ´Áҵðҹ à¹×èͧ¨Ò¡ÍØ»¡Ã³ìäÇÃìàÅÊ («Öè§ÍÒ¨ÁÕ¡ÒõԴµÑé§ÁÒã¹à¤Ã×èͧâ¹éµºØꤢͧ¤Ø³) Êè§
¾Åѧ§Ò¹µèÓ¡ÇèÒÃдѺ¢Õ´¨Ó¡Ñ´ã¹Áҵðҹ¤Å×蹤ÇÒÁ¶ÕèÇÔ·ÂØ ºÃÔÉÑ·àª×èÍÁÑè¹ÇèÒÍØ»¡Ã³ì¹Õé»ÅÍ´ÀÑÂÊÓËÃѺ¡ÒÃãªé§Ò¹ ¹Í¡¨Ò¡
ÃдѺ¾Åѧ§Ò¹áÅéÇ µéͧÃÐÁÑ´ÃÐÇѧà¾×èÍÅ´¡ÒÃÊÑÁ¼ÑʡѺÃèÒ§¡Ò¢³Ðãªé§Ò¹µÒÁ»¡µÔ
´Ñ§¤Óá¹Ð¹Ó·ÑèÇä» ¤ÇÃàÇé¹ÃÐÂÐ 20 ૹµÔàÁµÃ (8 ¹ÔéÇ) ÃÐËÇèÒ§ÍØ»¡Ã³ìäÇÃìàÅÊáÅÐÃèÒ§¡Ò ÊÓËÃѺ¡ÒÃãªéÍØ»¡Ã³ì
äÇÃìàÅÊã¡ÅéÃèÒ§¡Ò (äÁèÃÇÁÃдѺÊÙ§ÊØ´) «Öè§à»ç¹»¡µÔ ÍØ»¡Ã³ì¹Öé¤ÇÃÍÂÙèËèÒ§ÃèÒ§¡ÒÂà¡Ô¹ 20 ૹµÔàÁµÃ (8 ¹ÔéÇ) ¨Ò¡ÃèÒ§¡ÒÂ
àÁ×èÍÍØ»¡Ã³ìäÇÃìàÅÊ·Ó¡ÒÃÃѺÊ觢éÍÁÙÅ
ÍØ»¡Ã³ìÃѺÊè§ÊÑ−−Ò³¹ÕéµéͧäÁè·Ó§Ò¹ã¡Åé¡ÑºàÊÒÍÒ¡ÒÈËÃ×Íà¤Ã×èͧÃѺÊè§Í×è¹
ʶҹ¡ÒóìºÒ§»ÃÐàÀ··ÕèËéÒÁãªéÍØ»¡Ã³ìäÇÃìàÅÊ µÑÇÍÂèÒ§¡ÒÃËéÒÁãªéÁÕ¡ÒÃáÊ´§äÇéã¹ÊèǹµèÍ仹Õé:
¡ÒÃÊ×èÍÊÒäÅ×蹤ÇÒÁ¶ÕèÇÔ·ÂØÍҨú¡Ç¹ÍØ»¡Ã³ìº¹ÊÒ¡ÒúԹ¾Ò³ÔªÂì ¢éͺѧ¤Ñº¡ÒúԹ㹻Ѩ¨ØºÑ¹ ¡Ó˹´
ãËé»Ô´ÍØ»¡Ã³ìäÇÃìàÅÊ¢³Ðà´Ô¹·Ò§ã¹à¤Ã×èͧºÔ¹ ÍØ»¡Ã³ìÊ×èÍÊÒà 802.11B (ËÃ×ÍàÃÕ¡ÇèÒ wireless Ethernet ËÃ×Í Wifi)
áÅкÅٷٸ (Bluetooth) à»ç¹µÑÇÍÂèÒ§¢Í§ÍØ»¡Ã³ìÊ×èÍÊÒÃẺäÇÃìàÅÊ
vi Users Manual
ã¹ÊÀÒÇÐáÇ´ÅéÍÁ·ÕèÍÒ¨à¡Ô´ÍѹµÃÒÂ㹡ÒÃú¡ÇáÒ÷ӧҹ¢Í§ÍØ»¡Ã³ìÍ×è¹ ËÃ×Í¡ÒÃãªé§Ò¹ÍÒ¨·ÓãËéà¡Ô´
ÍѹµÃÒÂËÃ×Íä´éÃѺÍѹµÃÒ ÍÒ¨¨ÐÁÕ¡ÒÃÃкءÒèӡѴ¡ÒÃãªéËÃ×ÍËéÒÁãªéÍØ»¡Ã³ìäÇÃìàÅÊ Ê¹ÒÁºÔ¹, âç¾ÂÒºÒÅ
áÅо×é¹·Õè·ÕèÁÕÍÍ¡«ÔਹáÅÐá¡êÊ·ÕèµÔ´ä¿ä´é¤×͵ÑÇÍÂèҧʶҹ·Õè·ÕèÍÒ¨ÁÕ¡ÒèӡѴ¡ÒÃãªéËÃ×ÍËéÒÁãªéÍØ»¡Ã³ìäÇÃìàÅÊ
àÁ×èÍÍÂÙèã¹ÊÀÒÇÐáÇ´ÅéÍÁ·Õè¤Ø³äÁèá¹èã¨ã¹¡ÒÃãªéÍØ»¡Ã³ìäÇÃìàÅÊ ãËéÊͺ¶ÒÁà¨éÒ˹éÒ·Õè¡è͹¡ÒÃà»Ô´ãªé§Ò¹
ÍØ»¡Ã³ìäÇÃìàÅÊ
ã¹áµèÅлÃÐà·È¨ÐÁÕ¢éͨӡѴ¡ÒÃãªé§Ò¹ÍØ»¡Ã³ìäÇÃìàÅÊ·ÕèᵡµèÒ§¡Ñ¹ä» à¹×èͧ¨Ò¡à¤Ã×èͧ¢Í§¤Ø³ÁÕ¡ÒõԴµÑé§ÁÒ
¾ÃéÍÁ¡ÑºÍØ»¡Ã³ìäÇÃìàÅÊ àÁ×èͤسà´Ô¹·Ò§ä»µèÒ§»ÃÐà·Èâ´Â¹Óà¤Ã×èͧ仴éÇ ãËéµÃǨÊͺ¡ÑºË¹èǧҹ
à¡ÕèÂǡѺ¡ÒÃÊ×èÍÊÒÃÇÔ·ÂØã¹¾×é¹·ÕèÊÓËÃѺ¢éͨӡѴ¡ÒÃãªé§Ò¹ÍØ»¡Ã³ìäÇÃìàÅÊã¹»ÃÐà·È¹Ñé¹æ
㹡óշÕèà¤Ã×èͧ¢Í§¤Ø³ÁÕ¡ÒõԴµÑé§ÍØ»¡Ã³ìäÇÃìàÅÊäÇéÀÒÂã¹à¤Ã×èͧ ËéÒÁà»Ô´ãªéÍØ»¡Ã³ìäÇÃìàÅÊ â´Â·Õè½Ò¤Ãͺà¤Ã×èͧ
áÅеÑÇà¤Ã×èͧ»ÃСͺ¡Ñ¹ÍÂÙèµÒÁ»¡µÔ
ÍØ»¡Ã³ìäÇÃìàÅÊäÁèÊÒÁÒö«èÍÁá«Áä´éâ´Â¼Ùéãªé ËéÒÁ·Ó¡ÒÃá¡éä¢äÁèÇèҡóÕã´æ ¡ÒôѴá»Å§ÍØ»¡Ã³ìäÇÃìàÅÊ
¨Ð·ÓãËéÊÔé¹ÊØ´¡ÒÃ͹Ø−ÒµãËéãªé§Ò¹ÍØ»¡Ã³ì¹Ñé¹ ¡ÃسҵԴµèͺÃÔÉÑ·¼Ùé¼ÅÔµà¾×èÍÃѺ¡ÒëèÍÁá«Á
ãªé੾ÒÐä´ÃàÇÍÃì·Õèä´éÃѺ¡ÒÃÃѺÃͧÊÓËÃѺ»ÃÐà·È·Õè¨ÐãªéÍØ»¡Ã³ì¹Ñé¹à·èÒ¹Ñé¹ ´Ù¤ÙèÁ×͵ԴµÑé§Ãкº¢Í§ºÃÔÉÑ·
¼Ùé¼ÅÔµËÃ×͵ԴµèͽèÒÂʹѺʹع·Ò§à·¤¹Ô¤¢Í§ºÃÔÉÑ·ÊÓËÃѺ¢éÍÁÙÅà¾ÔèÁàµÔÁ
ÃÒÂÅÐàÍÕ´à¡ÕèÂǡѺ¢éͺѧ¤ÑºµèÒ§æ vii
»ÃÐà·ÈÊËÃÑ°ÍàÁÃÔ¡Ò
¢éÍ¡Ó˹´áÅлÃСÒÈ´éÒ¹¤ÇÒÁ»ÅÍ´ÀÑ¢ͧÊËÃÑ°ÍàÁÃÔ¡ÒáÅÐ᤹ҴÒ
ËéÒÁÊÑÁ¼ÑÊËÃ×Íà¤Å×è͹ÂéÒÂàÊÒÍÒ¡ÒÈ¢³Ð·ÕèÍØ»¡Ã³ì¡ÓÑÅѧÃѺÊè§ÊÑ−−Ò³
ËéÒÁ¶×Íͧ¤ì»ÃСͺ㴷ÕèÁÕÇÔ·ÂØ â´ÂãËéàÊÒÍÒ¡ÒÈÍÂÙèã¡ÅéËÃ×ÍÊÑÁ¼ÑʡѺÃèÒ§¡Ò â´Â੾ÒÐãºË¹éÒËÃ×ʹǧµÒ
¢³Ð·ÕèÁÕ¡ÒÃÊè§ÊÑ−−Ò³
ËéÒÁãªéÇÔ·ÂØËÃ×;ÂÒÂÒÁÊ觢éÍÁÙÅ ËÒ¡äÁèä´éµèÍàÊÒÍÒ¡ÒÈ ÁԩйÑé¹ ÍØ»¡Ã³ìÇÔ·ÂØÍÒ¨àÊÕÂËÒÂä´é
ãªéã¹ÊÀÒ¾áÇ´ÅéÍÁ·ÕèÃкØà·èÒ¹Ñé¹:
¡ÒÃãªéÍØ»¡Ã³ìäÃéÊÒÂã¹¾×é¹·Õè«Öè§ÁÕÍѹµÃÒ¨ÐÁÕ¢éͨӡѴµÒÁ·Õè¼ÙéÍӹǡÒýèÒ¤ÇÒÁ»ÅÍ´ÀÑ¢ͧáµèÅÐʶҹ·ÕèÃкØäÇé
¡ÒÃãªéÍØ»¡Ã³ìäÃéÊÒÂã¹à¤Ã×èͧºÔ¹¨ÐÍÂÙèã¹ÍÓ¹Ò¨¢Í§ Federal Aviation Administration (FAA)
¡ÒÃãªéÍØ»¡Ã³ìäÃéÊÒÂã¹âç¾ÂÒºÒŨÐÁÕ¢éͨӡѴµÒÁ·Õèâç¾ÂÒºÒÅáµèÅÐáË觡Ó˹´
¡ÒÃãªéàÊÒÍÒ¡ÒÈ:
à¾×èÍãËéÊÍ´¤Åéͧ¡Ñº¢éͨӡѴ¡ÒÃä´éÃѺÊÑ−−Ò³ÇÔ·Âآͧ FCC àÊÒÍÒ¡ÒÈã¹µÑǪ¹Ô´ÊÑ鹨еéͧÍÂÙèã¹ÃÐÂеèÓÊØ´ 20 «Á. (8 ¹ÔéÇ)
¨Ò¡ÃèÒ§¡Ò¢ͧºØ¤¤Å·Ñé§ËÁ´ã¹ºÃÔàdz
àÊÒÍÒ¡ÒȪ¹Ô´ÊÙ§ µÔ´¼¹Ñ§ ËÃ×͵ԴàÊÒ ä´éÃѺ¡ÒÃÍ͡Ẻà¾×èÍãËéµÔ´µÑé§â´ÂªèÒ§¼ÙéªÓ¹Ò− áÅФÇÃÁÕÃÐÂÐÍÂèÒ§¹éÍ 30 «Á. (12 ¹ÔéÇ)
¨Ò¡ÃèÒ§¡Ò¢ͧºØ¤¤Å·Ñé§ËÁ´ â»Ã´µÔ´µèͪèÒ§µÔ´µÑ駼ÙéªÓ¹Ò−§Ò¹ VAR
ËÃ×ͼÙé¼ÅÔµàÊÒÍÒ¡ÒÈà¾×èÍ·ÃÒº¢éÍ¡Ó˹´¡ÒõԴµÑ駷ÕèàËÁÒÐÊÁ
¤Óàµ×͹à¡ÕèÂǡѺÃÐÂÐËèÒ§¨Ò¡ÍØ»¡Ã³ì·Õèà»ç¹Çѵ¶ØÃÐàºÔ´
ËéÒÁãªéà¤Ã×èͧÊè§áºº¾¡¾Ò (àªè¹ÍØ»¡Ã³ìà¤Ã×Í¢èÒÂäÃéÊÒÂ) ã¡Åé¡ÑºÇѵ¶ØÃÐàºÔ´·ÕèäÁèÁÕ¡Òûéͧ¡Ñ¹
ËÃ×Íã¹ÊÀÒÇÐáÇ´ÅéÍÁ·ÕèäǵèÍ¡ÒÃÃÐàºÔ´ ¡àÇé¹·ÕèÁÕ¡ÒôѴá»Å§ÍØ»¡Ã³ìà¾×èÍãËéàËÁÒÐÊÁ¡Ñº¡ÒÃãªé§Ò¹
¤Óàµ×͹ÊÓËÃѺàÊÒÍÒ¡ÒÈ
à¾×èÍãËéà»ç¹ä»µÒÁ¢Õ´¨Ó¡Ñ´¡ÒÃÃѺÊÑ−−Ò³ÇÔ·Âآͧ FCC áÅÐ ANSI C95.1 ¢Íá¹Ð¹ÓãËéµÔ´µÑé§ Intel? PRO/Wireless
Network Connections 㹤ÍÁ¾ÔÇàµÍÃìà´Ê¡ì·Í»ËÃ×ÍẺ¾¡¾Ò
â´ÂãËéàÊÒÍÒ¡ÒȢͧÍØ»¡Ã³ìÍÂÙèËèÒ§ÍÍ¡ä»ÍÂèÒ§¹éÍ 20 «Á. (8 ¹ÔéÇ) ¨Ò¡ºØ¤¤Å·Ñé§ËÁ´
áÅÐàÊÒÍÒ¡ÒȨеéͧäÁèÁÕ¡ÒÃãªé§Ò¹ÃèÇÁ ËÃ×Íãªé§Ò¹¼ÊÒ¹¡ÑºàÊÒÍÒ¡ÒÈËÃ×Íà¤Ã×èͧÊè§ÊÑ−−Ò³ÇÔ·ÂØÍ×è¹
¢Íá¹Ð¹ÓãËé¼Ùéãªé¨Ó¡Ñ´àÇÅÒ㹡ÒÃÃѺÊÑ−−Ò³ ËÒ¡àÊÒÍÒ¡ÒÈÍÂÙèã¡Åéà¡Ô¹¡ÇèÒ 20 «Á. (8 ¹ÔéÇ)
¢éͤÇÃÃÐÇѧ㹡ÒÃãªé§Ò¹ã¹ÍÒ¡ÒÈÂÒ¹
¢éͤÇÃÃÐÇѧ: ÃÐàºÕº¢Í§ FCC áÅÐ FAA ËéÒÁ¡ÒÃãªé§Ò¹ÍØ»¡Ã³ìäÃéÊÒ·Õèãªé¤ÇÒÁ¶Õè¢Í§ÇÔ·ÂØ¢³Ðà´Ô¹·Ò§·Ò§ÍÒ¡ÒÈ
à¹×èͧ¨Ò¡ÊÑ−−Ò³¢Í§ÍØ»¡Ã³ìÍҨú¡Ç¹ÍØ»¡Ã³ìÊÓ¤Ñ−¢Í§ÍÒ¡ÒÈÂÒ¹ä´é
viii Users Manual
ÍØ»¡Ã³ìäÃéÊÒÂÍ×è¹æ
»ÃСÒÈà¾×èͤÇÒÁ»ÅÍ´ÀÑÂÊÓËÃѺÍØ»¡Ã³ìÍ×è¹æ ã¹à¤Ã×Í¢èÒÂäÃéÊÒÂ:
â»Ã´ÍèÒ¹àÍ¡ÊÒ÷ÕèÁÒ¾ÃéÍÁ¡ÑºÍÐá´»àµÍÃìÍÕà¸ÍÃìà¹çµäÃéÊÒ ËÃ×ÍÍØ»¡Ã³ìÍ×è¹æ ã¹à¤Ã×Í¢èÒÂäÃéÊÒÂ
¤Óàµ×͹: ÍØ»¡Ã³ìÇÔ·ÂØ Part 15 ¨Ð·Ó§Ò¹â´ÂäÁèÁÕÊÑ−−ҳú¡Ç¹¡ÑºÍØ»¡Ã³ìÍ×è¹·Õè·Ó§Ò¹ã¹ªèǧ¤ÇÒÁ¶Õèà´ÕÂǡѹ
¡ÒÃá¡éä¢ËÃ×Í´Ñ´á»Å§¼ÅÔµÀѳ±ì´Ñ§¡ÅèÒÇ ·ÕèäÁèÁÕ¡ÒÃ͹ØÁѵÔÍÂèÒ§ªÑ´à¨¹â´Â Intel
ÍÒ¨·ÓãËéÊÔ·¸Ôì㹡ÒÃãªéÍØ»¡Ã³ì¢Í§¼Ùéãªéà»ç¹âÁ¦Ð
Unintentional Emitter ¢Í§ FCC Êèǹ 15
ÍØ»¡Ã³ì¹ÕéµÃ§µÒÁ¢éͺѧ¤ÑºÊèǹ 15 ¢Í§ FCC ¡ÒÃãªé§Ò¹µéͧà»ç¹ä»µÒÁà§×è͹䢵èÍ仹Õé: (1) ÍØ»¡Ã³ì¹ÕéäÁè·ÓãËéà¡Ô´
ÍѹµÃÒ¨ҡÊÑ−−ҳú¡Ç¹áÅÐ (2) ÍØ»¡Ã³ì¹ÕéµéͧÊÒÁÒöÃѺÊÑ−−ҳú¡Ç¹·ÕèÍÒ¨à¡Ô´¢Öé¹ä´é ÃÇÁ·Ñé§ÊÑ−−Ò³
ú¡Ç¹·ÕèÍÒ¨Ê觼ŵèÍ¡Ò÷ӧҹ
ÍØ»¡Ã³ì¹Õéä´é¼èÒ¹¡Ò÷´ÊͺáÅеçµÒÁ¢éͨӡѴ¤ÅÒÊ B ¢Í§ÍØ»¡Ã³ì´Ô¨ÔµÍÅ µÒÁÊèǹ·Õè 15 ¢Í§¡® FCC ¢éͨӡѴ
àËÅèÒ¹Õéä´éÃѺ¡ÒÃÍ͡Ẻà¾×èÍãËé¡Òûéͧ¡Ñ¹·ÕèàËÁÒÐÊÁà¾×èÍ»éͧ¡Ñ¹¡ÒÃà¡Ô´ÊÑ−−ҳú¡Ç¹·ÕèÍÒ¨à»ç¹ÍѹµÃÒÂ
ÊÓËÃѺ¡ÒÃãªé§Ò¹ã¹·Õè¾Ñ¡ÍÒÈÑ ÍØ»¡Ã³ì¹ÕéÊÃéÒ§áÅÐãªé§Ò¹¾Åѧ§Ò¹¤Å×蹤ÇÒÁ¶ÕèÇÔ·ÂØáÅÐËÒ¡äÁèä´éÃѺ¡ÒÃ
µÔ´µÑé§áÅÐãªé§Ò¹µÒÁ¤Óá¹Ð¹ÓÍÒ¨·ÓãËéà¡Ô´ÊÑ−−ҳú¡Ç¹·ÕèÍÒ¨à»ç¹ÍѹµÃÒÂ
áµè¨ÐäÁèà¡Ô´¢Öé¹ã¹¡ÒõԴµÑ駵ÒÁ»¡µÔ ËÒ¡ÍØ»¡Ã³ì¹Õé·ÓãËéà¡Ô´ÊÑ−−ҳú¡Ç¹µèÍ¡ÒÃÃѺÊÑ−−Ò³ÇÔ·ÂØËÃ×Íâ·Ã·Ñȹì
«Öè§ÊÒÁÒöµÃǨÊͺä´éâ´Â¡ÒûԴáÅÐà»Ô´ÍØ»¡Ã³ì áÅÐá¹Ð¹ÓãËéá¡éä¢ÊÑ−−ҳú¡Ç¹â´ÂÇÔ¸Õ¡ÒõèÍ仹Õé:
• ¨Ñ´ÇÒ§ËÃ×ÍÂéÒµÓá˹觢ͧàÊÒÍÒ¡ÒÈ
• à¾ÔèÁÃÐÂÐËèÒ§ÃÐËÇèÒ§ÍØ»¡Ã³ìáÅÐÀÒ¤ÃѺ
• µèÍÍØ»¡Ã³ìà¢éҡѺàµéÒàÊÕº·Õèᡨҡ·ÕèãªéàÊÕºÍØ»¡Ã³ìÃѺÊÑ−−Ò³
• »ÃÖ¡ÉÒµÑÇá·¹¨Ó˹èÒÂËÃ×ͪèÒ§ÇÔ·ÂØ/â·Ã·Ñȹì·ÕèÁÕ»ÃÐʺ¡Òóìà¾×èͤ͢Óá¹Ð¹Ó
㹡óշÕè¨Óà»ç¹ ¼ÙéãªéÍÒ¨µéͧ»ÃÖ¡ÉÒµÑÇá·¹¨Ó˹èÒÂËÃ×ͪèÒ§ÇÔ·ÂØ/â·Ã·Ñȹìà¾×èͤ͢Óá¹Ð¹Ó ¼ÙéãªéÍÒ¨¾ºÇèÒ¤ÙèÁ×Í
àËÅèÒ¹ÕéÁÕ»ÃÐ⪹ì: "à¡ÕèÂǡѺÊÑ−−ҳú¡Ç¹" «Öè§ÊÒÁÒö¢ÍÃѺä´é·ÕèÊӹѡ§Ò¹à¡ÕèÂǡѺ FCC ã¹¾×é¹·Õè ºÃÔÉÑ·Ï äÁè¢Í
ÃѺ¼Ô´ªÍºÊÓËÃѺ¡ÒÃà¡Ô´ÊÑ−−ҳú¡Ç¹µèÍÇÔ·ÂØËÃ×Íâ·Ã·ÑÈ¹ì ·Õèà¡Ô´¨Ò¡¡ÒôѴá»Å§ÍØ»¡Ã³ìâ´ÂäÁèä´éÃѺ͹Ø−Òµ ¡ÒûÃѺ
à»ÅÕè¹ËÃ×͵èÍÊÒÂà¤àºÔÅàª×èÍÁµè͡ѺÍØ»¡Ã³ìÍ×è¹æ ·ÕèºÃÔÉÑ·äÁèä´éÃкØäÇé ¼ÙéãªéµéͧÃѺ¼Ô´ªÍºã¹¡ÒÃá¡é䢴éǵ¹àͧ ãªé੾ÒÐÊÒÂ
à¤àºÔÅ¢éÍÁÙÅ·ÕèÁÕ¡ÒêÕÅ´ì¡Ñºà¤Ã×èͧà·èÒ¹Ñé¹
Written by: Daryl L. Osden
intentional Emitter ¢Í§ FCC Êèǹ 15
ÍØ»¡Ã³ìÃкº LAN Ê×èÍÊÒôéǤÅ×è¹ÇÔ·ÂØ ¾Åѧ§Ò¹µèÓ (ÍØ»¡Ã³ìÊ×èÍÊÒÃäÇÃìàÅÊ´éǤÅ×蹤ÇÒÁ¶ÕèÇÔ·ÂØ (RF)) ·Ó§Ò¹´éǤÇÒÁ¶Õè
2.4 ¡Ô¡ÐàÎÔÃ쵫ì ÍÒ¨¾ºä´éã¹à¤Ã×èͧâ¹éµºØꤢͧ¤Ø³ ãªé¢éÍÁÙÅÊèǹ¹Õé㹡óշÕèÁÕÍØ»¡Ã³ìµèÒ§æ àËÅèÒ¹Õéà·èÒ¹Ñé¹ â»Ã´´Ù¨Ò¡©ÅÒ¡¢Í§
à¤Ã×èͧà¾×è͵ÃǨÊͺà¡ÕèÂǡѺÍØ»¡Ã³ìäÇÃìàÅÊ
ÍØ»¡Ã³ìäÇÃìàÅÊ·ÕèÍÒ¨ÁÕ¡ÒõԴµÑé§äÇéã¹à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³ãªéÊÓËÃѺ㹻ÃÐà·ÈÊËÃÑ°ÍàÁÃÔ¡ÒËÒ¡ÁÕËÁÒÂàÅ¢ FCC ID
·Õè©ÅÒ¡¢Í§à¤Ã×èͧ
FCC ¡Ó˹´ãËéàÇé¹ÃÐÂÐ 20 ૹµÔàÁµÃ (8 ¹ÔéÇ) ÃÐËÇèÒ§ÍØ»¡Ã³ìäÇÃìàÅÊáÅÐÃèÒ§¡Ò ÊÓËÃѺ¡ÒÃãªéÍØ»¡Ã³ìäÇÃìàÅÊã¡ÅéÃèÒ§¡ÒÂ
(äÁèÃÇÁÃдѺÊÙ§ÊØ´) ÍØ»¡Ã³ì¹é¤Ö ÇÃÍÂÙèËèÒ§ÃèÒ§¡ÒÂà¡Ô¹ 20 ૹµÔàÁµÃ (8 ¹ÔéÇ) ¨Ò¡ÃèÒ§¡ÒÂàÁ×èÍà»Ô´ãªéÍØ»¡Ã³ìäÇÃìàÅÊ
à¾ÒàÇÍÃìàÍÒµì¾Øµ¢Í§ÍØ»¡Ã³ìäÇÃìàÅÊËÃ×ÍÍØ»¡Ã³ì·ÕèÍÒ¨µÔ´µÑé§ÁÒã¹à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃìâ¹éµºØꤢͧ¤Ø³ÁÕÃдѺ¡ÒÃÊ觤Å×è¹
¤ÇÒÁ¶ÕèÇÔ·ÂØ RF µèÓ¡ÇèÒ¢Õ´¨Ó¡Ñ´Áҵðҹ
ÃÒÂÅÐàÍÕ´à¡ÕèÂǡѺ¢éͺѧ¤ÑºµèÒ§æ ix
ÍØ»¡Ã³ìÃѺÊè§ÊÑ−−Ò³¹ÕéµéͧäÁè·Ó§Ò¹ã¡Åé¡ÑºàÊÒÍÒ¡ÒÈËÃ×Íà¤Ã×èͧÃѺÊè§Í×è¹
¡ÒÃãªé§Ò¹ÍØ»¡Ã³ì¹Õéµéͧà»ç¹ä»µÒÁà§×è͹ä¢Êͧ»ÃСÒõèÍ仹Õé: (1) ÍØ»¡Ã³ì¹ÕéäÁè·ÓãËéà¡Ô´ÊÑ−−ҳú¡Ç¹·Õèà»ç¹ÍѹµÃÒÂáÅÐ
(2) ÍØ»¡Ã³ì¹ÕéÊÒÁÒöÃѺÊÑ−−ҳú¡Ç¹ã´æ ÃÇÁ·Ñé§ÊÑ−−Ò³·ÕèÍÒ¨Ê觼ŵèÍ¡Ò÷ӧҹ·ÕèäÁè¾Ö§»ÃÐʧ¤ì¢Í§ÍØ»¡Ã³ì¹Õéä´é
ÍØ»¡Ã³ìäÇÃìàÅÊäÁèÊÒÁÒö«èÍÁá«Áä´éâ´Â¼Ùéãªé ËéÒÁ·Ó¡ÒÃá¡éä¢äÁèÇèҡóÕã´æ ¡ÒôѴá»Å§ÍØ»¡Ã³ìäÇÃìàÅÊ
¨Ð·ÓãËéÊÔé¹ÊØ´¡ÒÃ͹Ø−ÒµãËéãªé§Ò¹ÍØ»¡Ã³ì¹Ñé¹ µÔ´µèͺÃÔÉÑ·¼Ùé¼ÅÔµà¾×èÍÃѺ¡ÒëèÍÁá«Á
»ÃСÒÈ FCC SÊÓËÃѺ¡ÒÃãªé§Ò¹ Wireless LAN:
"¢³ÐµÔ´µÑé§áÅÐãªé§Ò¹ÍØ»¡Ã³ìÊè§ÊÑ−−Ò³¹ÕéáÅÐàÊÒÍÒ¡ÒÈÃÇÁ·Ñ駡ÒÃÊ觤Å×蹤ÇÒÁ¶ÕèÇÔ·ÂØÁÕ¢Õ´¨Ó¡Ñ´·Õè 1mW/cm2
ÍÒ¨ÁÕ¤èÒÊÙ§à¡Ô¹¡ÇèÒ¡Ó˹´ËÒ¡ÁÕÃÐÂÐÃÐËÇèÒ§àÊÒÍÒ¡ÒÈ·ÕèÊÑé¹à¡Ô¹ä» ´Ñ§¹Ñé¹ ¼Ùéãªé¨Ö§¤ÇÃÃÑ¡ÉÒÃÐÂÐËèÒ§äÇéÍÂèÒ§¹éÍÂ
20 ૹµÔàÁµÃ¨Ò¡àÊÒÍÒ¡ÒÈäÇéµÅÍ´àÇÅÒ ÍØ»¡Ã³ì¹ÕéäÁèÊÒÁÒöãªéÃèÇÁ¡ÑºÍØ»¡Ã³ìÊè§ÊÑ−−Ò³áÅÐàÊÒÍÒ¡ÒÈÍ×è¹æ"
FCC Êèǹ 68
ÍØ»¡Ã³ì¹ÕéµÃ§µÒÁ¢éͺѧ¤Ñº¢Í§ FCC ´éÒ¹ËÅѧà¤Ã×èͧ¨ÐÁÕ©ÅÒ¡·ÕèÁÕ¢éÍÁÙÅÃкØËÁÒÂàÅ¢ FCC áÅÐËÁÒÂàÅ¢ Ringer Equivalence
Number (REN) äÇéÃÇÁ¡Ñº¢éÍÁÙÅÍ×è¹æ 㹺ҧ¡Ã³Õ ÍÒ¨µéͧãËé¢éÍÁÙŹÕé¡ÑººÃÔÉÑ·â·ÃÈѾ·ì
ÍØ»¡Ã³ì¹Õéãªéá¨ç¤ USOC µèÍ仹Õé : RJ11C
ÊÒÂâ·ÃÈѾ·ìáÅлÅÑ¡ê µè͵ÒÁÁҵðҹ FCC ÁÕÁÒãËé¾ÃéÍÁ¡Ñºà¤Ã×èͧ ÍØ»¡Ã³ì¹Õéä´éÃѺ¡ÒÃÍ͡Ẻà¾×èÍàª×èÍÁµè͡Ѻà¤Ã×Í¢èÒÂ
â·ÃÈѾ·ìËÃ×Í¡ÒÃàª×èÍÁµèÍ·Õèãªéá¨ç¤âÁ´ÙÅÒÃì«Ö觵çµÒÁÁҵðҹÊèǹ 68 ´ÙÃÒÂÅÐàÍÕ´¨Ò¡¤Óá¹Ð¹ÓÊÓËÃѺ¡ÒõԴµÑé§
REN ãªéÊÓËÃѺµÃǨÊͺ¨Ó¹Ç¹ÍØ»¡Ã³ì·ÕèÊÒÁÒöàª×èÍÁµè͡ѺÊÒÂâ·ÃÈѾ·ìä´é ¡ÒÃàª×èÍÁµèÍà¡Ô¹¡ÇèÒ REN ÍÒ¨·ÓãËé¡ÃÔè§â·ÃÈѾ·ì
äÁè´Ñ§àÁ×èÍÁÕÊÒÂàÃÕ¡à¢éÒ ÊèǹãË−è áµèäÁè·Ø¡¾×é¹·Õè ¨Ó¹Ç¹ÃÇÁ¢Í§ REN äÁè¤ÇÃà¡Ô¹ËéÒ (5.0) ÊÓËÃѺ¡ÒõÃǨÊͺ¨Ó¹Ç¹
·Õèá¹è¹Í¹¢Í§ÍØ»¡Ã³ì·ÕèÊÒÁÒöàª×èÍÁµè͡ѺÊÒÂâ·ÃÈѾ·ìä´é µÒÁ·ÕèÃкØ㹨ӹǹ REN ÃÇÁ â»Ã´µÔ´µèͺÃÔÉÑ·â·ÃÈѾ·ìã¹
¾×é¹·Õèà¾×è͵ÃǨÊͺ¨Ó¹Ç¹ REN ÊÙ§ÊØ´·ÕèÊÒÁÒöãªéä´éÊÓËÃѺ¾×é¹·Õè¹Ñé¹æ
ËÒ¡ÍØ»¡Ã³ìà·ÍÃìÁÔ¹ÑÅ·ÓãËéà¡Ô´¤ÇÒÁàÊÕÂËÒ¡Ѻà¤Ã×Í¢èÒÂâ·ÃÈѾ·ì ºÃÔÉÑ·â·ÃÈѾ·ì¨Ðá¨é§ãËé¤Ø³·ÃÒºÅèǧ˹éÒÇèÒÍÒ¨äÁèÁÕ
¡ÒÃãËéºÃÔ¡ÒêÑèǤÃÒÇ áµèËÒ¡äÁèÊÒÁÒöá¨é§àµ×͹Åèǧ˹éÒ ºÃÔÉÑ·â·ÃÈѾ·ì¨Ðá¨é§ãËéÅÙ¡¤éÒ·ÃÒºâ´ÂàÃçÇ·ÕèÊØ´à·èÒ·Õè¨Ð·Óä´é
áÅФس¨Ðä´éÃѺ¤Óá¹Ð¹Óã¹ÊÔ·¸Ô¢Í§¤Ø³·Õè¨ÐÊ觤ÇÒÁ¤Ô´àËç¹ä»Âѧ FCC ËÒ¡¤Ø³¤Ô´ÇèÒ¨Óà»ç¹
ºÃÔÉÑ·â·ÃÈѾ·ìÍÒ¨ÁÕ¡ÒÃà»ÅÕè¹á»Å§à¤Ã×èͧÁ×Í ÍØ»¡Ã³ìµèÒ§æ ¡Ò÷ӧҹËÃ×Í¡Ãкǹ¡Ò÷ÕèÍÒ¨Ê觼šÃзºµèÍ¡ÒÃãªéÍØ»¡Ã³ì
ä´é ËÒ¡à¡Ô´¡Ã³Õ¹Õé¢Öé¹ ºÃÔÉÑ·â·ÃÈѾ·ì¨Ðá¨é§ãËé·ÃÒºÅèǧ˹éÒà¾×èÍãËé¤Ø³·Ó¡ÒûÃѺá¡é·Õè¨Óà»ç¹ à¾×èÍãËéÊÒÁÒöÃѺºÃÔ¡ÒÃ
ä´éÍÂèÒ§µèÍà¹×èͧ
ËÒ¡à¡Ô´»Ñ−ËҡѺÍØ»¡Ã³ì¹Õé (âÁà´çÁ) ÊÓËÃѺ¢éÍÁÙÅà¡ÕèÂǡѺ¡ÒëèÍÁáÅСÒÃÃѺ»ÃСѹ â»Ã´µÔ´µè͵ÑÇá·¹¨Ó˹èÒÂã¹¾×é¹·Õè
ËÒ¡ÍØ»¡Ã³ì¹Õé·ÓãËéà¡Ô´¤ÇÒÁàÊÕÂËÒ¡Ѻà¤Ã×Í¢èÒÂâ·ÃÈѾ·ì ºÃÔÉÑ·â·ÃÈѾ·ìÍÒ¨¢ÍãËé¤Ø³àÅÔ¡àª×èÍÁµèÍÍØ»¡Ã³ì ¨¹¡ÇèÒ¨Ðá¡éä¢
»Ñ−ËÒä´é
¼ÙéãªéµéͧãªéÍØ»¡Ã³ìµèÒ§æ ·Õèä´éÃѺ¨Ò¡ºÃÔÉÑ·¼Ùé¼ÅÔµà¾×èÍãËéä´é»ÃÐÊÔ·¸ÔÀÒ¾ÊÙ§ÊØ´¨Ò¡¡ÒÃãªé§Ò¹
ËéÒÁ¼Ùéãªé·Ó¡ÒëèÍÁá«Áã´æ ´éǵ¹àͧ
ÍØ»¡Ã³ì¹ÕéäÁèÊÒÁÒöãªéä´é¡Ñºâ·ÃÈѾ·ìËÂÍ´àËÃÕÂ−ÊÒ¸ÒóзÕèãËéºÃÔ¡ÒÃâ´ÂºÃÔÉÑ·â·ÃÈѾ·ì ¡ÒÃàª×èÍÁµèÍä»Âѧ¡ÒûÃЪØÁÊÒÂ
µéͧàÊÕ¤èÒºÃÔ¡ÒõÒÁÍѵÃÒã¹ÃÑ°¹Ñé¹æ
¾Ãº.à¾×èÍ¡Òû¡»éͧ¼ÙéºÃÔâÀ¤à¡ÕèÂǡѺºÃÔ¡ÒÃâ·ÃÈѾ·ì (Telephone Consumer Protection Act) »Õ 1991 ·ÓãËéà»ç¹¡ÒüԴ¡®ËÁÒÂ
ÊÓËÃѺ¡ÒÃãªé¤ÍÁ¾ÔÇàµÍÃìËÃ×ÍÍØ»¡Ã³ìÍÔàÅç¡·Ã͹ԡÊìÍ×è¹æ ÃÇÁ·Ñé§à¤Ã×èͧῡ«ì à¾×èÍÊ觢éͤÇÒÁã´æ ¹Í¡¨Ò¡¢éͤÇÒÁ¹Ñé¹
ÁÕÊèǹ¢Íºº¹áÅÐÅèÒ§·ÕèªÑ´à¨¹ã¹áµèÅÐ˹éÒ·ÕèÊè§ Çѹ·ÕèáÅÐàÇÅÒ·ÕèÊè§áÅСÒÃÃкت×èͺÃÔÉÑ·ËÃ×ÍÍ×è¹æ ËÃ×ͼÙéÊ觢éͤÇÒÁáÅÐ
ËÁÒÂàÅ¢â·ÃÈѾ·ì·ÕèãªéÊè§àªè¹ ºÃÔÉÑ·ËÃ×Í¢éÍÁÙÅÍ×è¹æ ËÃ×Í¢éÍÁÙźؤ¤Å (ËÁÒÂàÅ¢â·ÃÈѾ·ì·ÕèÃкØÍÒ¨äÁèãªèËÁÒÂàÅ¢·ÕèÁÕ¡ÒäԴ¤èÒ
ºÃÔ¡ÒÃà¡Ô¹áººã¹¾×é¹·ÕèËÃ×ÍẺ·Ò§ä¡Å)
x Users Manual
à¾×è͵Ñé§â»Ãá¡ÃÁ¢éÍÁÙÅàËÅèÒ¹Õéŧã¹à¤Ã×èͧâ·ÃÊÒâͧ¤Ø³ â»Ã´´Ù¤ÙèÁ×ͧ͢«Í¿µìáÇÃì¡ÒÃÊ×èÍÊÒ÷Õèãªé
᤹ҴÒ
Unintentional Emitter per ICES-003
ÍØ»¡Ã³ì´Ô¨ÔµÍŹÕéäÁèà¡Ô¹¢Õ´¨Ó¡Ñ´¤ÅÒÊ B Ê−ÓËÃѺ¡ÒÃÊè§ÊÑ−−ҳú¡Ç¹ÇÔ·ÂبҡÍØ»¡Ã³ì´Ô¨ÔµÍŵÒÁ¢éͺѧ¤Ñº
ÇèÒ´éÇ¡ÒÃÊè§ÊÑ−−ҳú¡Ç¹¢Í§ÇÔ·ÂصÒÁÁҵðҹÍصÊÒË¡ÃÃÁã¹á¤¹Ò´Ò
Le prŽsent appareil numŽrique nÕŽmet pas de bruits radioŽlectriques dŽpassant les
limitesapplicables aux appareils numŽriques de Classe B prescrites dans le rglement sur le
brouillage radioŽlectrique ŽdictŽ par Industrie Canada.
Intentional Emitter per RSS 210
ÍØ»¡Ã³ìÃкº LAN Ê×èÍÊÒôéǤÅ×è¹ÇÔ·ÂØ ¾Åѧ§Ò¹µèÓ (ÍØ»¡Ã³ìÊ×èÍÊÒÃäÇÃìàÅÊ´éǤÅ×蹤ÇÒÁ¶ÕèÇÔ·ÂØ (RF)) ·Ó§Ò¹´éǤÇÒÁ¶Õè
2.4 ¡Ô¡ÐàÎÔÃ쵫ì ÍÒ¨¾ºä´éã¹ à¤Ã×èͧâ¹éµºØꤢͧ¤Ø³ ãªé¢éÍÁÙÅÊèǹ¹Õé㹡óշÕèÁÕÍØ»¡Ã³ìµèÒ§æ àËÅèÒ¹Õéà·èÒ¹Ñé¹ â»Ã´´Ù¨Ò¡©ÅÒ¡
¢Í§à¤Ã×èͧà¾×è͵ÃǨÊͺà¡ÕèÂǡѺÍØ»¡Ã³ìäÇÃìàÅÊ
ÍØ»¡Ã³ìäÇÃìàÅÊ·ÕèÍÒ¨ÁÕ¡ÒõԴµÑé§äÇéã¹à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³ãªéÊÓËÃѺ㹻ÃÐà·È᤹ҴÒËÒ¡ÁÕËÁÒÂàÅ¢ Industry Canada ID
·Õè©ÅÒ¡¢Í§à¤Ã×èͧ
´Ñ§¤Óá¹Ð¹Ó·ÑèÇä» ¤ÇÃàÇé¹ÃÐÂÐ 20 ૹµÔàÁµÃ (8 ¹ÔéÇ) ÃÐËÇèÒ§ÍØ»¡Ã³ìäÇÃìàÅÊáÅÐÃèÒ§¡Ò ÊÓËÃѺ¡ÒÃãªéÍØ»¡Ã³ìäÇÃìàÅÊã¡Åé
ÃèÒ§¡Ò (äÁèÃÇÁÃдѺÊÙ§ÊØ´) «Öè§à»ç¹»¡µÔ ÍØ»¡Ã³ì¹Öé¤ÇÃÍÂÙèËèÒ§ÃèÒ§¡ÒÂà¡Ô¹ 20 ૹµÔàÁµÃ (8 ¹ÔéÇ) ¨Ò¡ÃèÒ§¡ÒÂàÁ×èÍà»Ô´ãªé
ÍØ»¡Ã³ìäÇÃìàÅÊ
à¾ÒàÇÍÃìàÍÒµì¾Øµ¢Í§ÍØ»¡Ã³ìäÇÃìàÅÊËÃ×ÍÍØ»¡Ã³ì·ÕèÍÒ¨µÔ´µÑé§ÁÒã¹à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃìâ¹éµºØꤢͧ¤Ø³ÁÕÃдѺ¡ÒÃÊ觤Å×è¹
¤ÇÒÁ¶ÕèÇÔ·ÂØ RF µèÓ¡ÇèÒ¢Õ´¨Ó¡Ñ´Áҵðҹ·Õè¡Ó˹´â´Â Industry Canada
ÍØ»¡Ã³ìÃѺÊè§ÊÑ−−Ò³¹ÕéµéͧäÁè·Ó§Ò¹ã¡Åé¡ÑºàÊÒÍÒ¡ÒÈËÃ×Íà¤Ã×èͧÃѺÊè§Í×è¹
¡ÒÃãªé§Ò¹ÍØ»¡Ã³ì¹Õéµéͧà»ç¹ä»µÒÁà§×è͹ä¢Êͧ»ÃСÒõèÍ仹Õé: (1) ÍØ»¡Ã³ì¹ÕéäÁè·ÓãËéà¡Ô´ÊÑ−−ҳú¡Ç¹·Õèà»ç¹ÍѹµÃÒÂáÅÐ
(2) ÍØ»¡Ã³ì¹ÕéÊÒÁÒöÃѺÊÑ−−ҳú¡Ç¹ã´æ ÃÇÁ·Ñé§ÊÑ−−Ò³·ÕèÍÒ¨Ê觼ŵèÍ¡Ò÷ӧҹ·ÕèäÁè¾Ö§»ÃÐʧ¤ì¢Í§ÍØ»¡Ã³ì¹Õéä´é
à¾×èÍ»éͧ¡Ñ¹¡ÒÃà¡Ô´¡ÒÃú¡Ç¹ÊÑ−−Ò³ÇÔ·ÂØ㹡ÒÃãªéÍØ»¡Ã³ì ÍØ»¡Ã³ì¹ÕéÍ͡ẺãËéãªéã¹ÍÒ¤ÒÃáÅÐËèÒ§¨Ò¡
˹éÒµèÒ§à¾×èÍãËé¡Òûéͧ¡Ñ¹ÊÙ§ÊØ´ ÍØ»¡Ã³ì (ËÃ×ÍàÊÒÍÒ¡ÒÈ) ·ÕèµÔ´µÑ駹͡ÍÒ¤Òà µéͧä´éÃѺ͹Ø−ÒµàÊÕ¡è͹
ÍØ»¡Ã³ìäÇÃìàÅÊäÁèÊÒÁÒö«èÍÁá«Áä´éâ´Â¼Ùéãªé ËéÒÁ·Ó¡ÒÃá¡éä¢äÁèÇèҡóÕã´æ ¡ÒôѴá»Å§ÍØ»¡Ã³ìäÇÃìàÅÊ
¨Ð·ÓãËéÊÔé¹ÊØ´¡ÒÃ͹Ø−ÒµãËéãªé§Ò¹ÍØ»¡Ã³ì¹Ñé¹ µÔ´µèͺÃÔÉÑ·¼Ùé¼ÅÔµà¾×èÍÃѺ¡ÒëèÍÁá«Á
ÃÒÂÅÐàÍÕ´à¡ÕèÂǡѺ¢éͺѧ¤ÑºµèÒ§æ xi
á¨é§ãËé·ÃÒºà¡ÕèÂǡѺàÍ¡ÊÒôéÒ¹¡ÒÃÊ×èÍÊÒÃ
(ÊÓËÃѺ¼ÅÔµÀѹ±ì·ÕèÁÕ¡ÒõԴµÑé§âÁà´çÁÁҵðҹ IC)
©ÅÒ¡ Industry Canada ¨ÐÁÕ¡ÒÃÃкØäÇéãËé¡ÑºÍØ»¡Ã³ì·Õè¼èÒ¹Áҵðҹ ¡ÒÃÃѺÃͧ¹ÕéËÁÒ¶֧¡Ò÷ÕèÍØ»¡Ã³ìµÃ§µÒÁÁҵðҹ
¡Òûéͧ¡Ñ¹¢Í§à¤Ã×Í¢èÒÂâ·Ã¤Á¹Ò¤Á ¡Ò÷ӧҹ áÅФÇÒÁµéͧ¡ÒÃ㹡ÒÃÃÑ¡ÉÒ¤ÇÒÁ»ÅÍ´ÀÑ ˹èǧҹäÁèÃѺÃͧÇèÒÍØ»¡Ã³ì
¨Ð·Ó§Ò¹ä´éµÃ§µÒÁ¤ÇÒÁ¾Í㨢ͧÅÙ¡¤éÒ
¡è͹µÔ´µÑé§ÍØ»¡Ã³ì¹Õé ¼Ùéãªé¤ÇõÃǨÊͺãËéá¹èã¨ÇèÒä´éÃѺ͹Ø−ÒµãËéàª×èÍÁµè͡ѺÍØ»¡Ã³ì¢Í§ºÃÔÉÑ·â·Ã¤Á¹Ò¤Áã¹¾×é¹·Õè ¡ÒõԴµÑé§
ÍØ»¡Ã³ìµéͧ·ÓµÒÁÇÔ¸Õ¡ÒÃ㹡ÒÃàª×èÍÁµèÍ·Õè¶Ù¡µéͧ 㹺ҧ¡Ã³Õ ¡ÒÃà´Ô¹ÊÒÂÀÒÂã¹â´ÂãªéÊÒÂà´ÕÂÇ ÍÒ¨ä´éÃѺ¡Òõè;èǧ´éÇÂ
ÍØ»¡Ã³ì·Õèä´éÁҵðҹ ÅÙ¡¤éÒ¤ÇõÃÐ˹ѡÇèÒ¡Òû¯ÔºÑµÔµÒÁà§×è͹䢢éÒ§µé¹ äÁèÍÒ¨»éͧ¡Ñ¹¡ÒÃŴŧ¢Í§»ÃÐÊÔ·¸ÔÀÒ¾
¡Ò÷ӧҹ㹺ҧʶҹ¡Òóìä´é
¡ÒëèÍÁÍØ»¡Ã³ì·Õèä´éÁҵðҹ¹Õé¤Ç÷Óâ´ÂÈÙ¹Âì«èÍÁ·Õèä´éÃѺ¡ÒÃáµè§µÑé§â´Â˹èǧҹ¡ÒëèÍÁºÓÃا¢Í§á¤¹Ò´Ò·Õèä´éÃѺ
¡ÒáÓ˹´â´ÂµÑÇá·¹¨Ó˹èÒ ¡ÒëèÍÁËÃ×Í»ÃѺá¡éÍØ»¡Ã³ì¹Õéâ´Â¼Ùéãªé ËÃ×Í¡Ò÷ӧҹ·Õè¼Ô´¾ÅÒ´¢Í§ÍØ»¡Ã³ìÍÒ¨·ÓãËé
ºÃÔÉÑ·â·Ã¤Á¹Ò¤Á¢ÍãËé¼Ùéãªé¡àÅÔ¡¡ÒÃàª×èÍÁµèÍÍØ»¡Ã³ì
¼Ùéãªé¤ÇõÃǨÊͺãËéá¹èã¨à¾×èÍ¡Òûéͧ¡Ñ¹µÑÇàͧÇèÒ ÁÕ¡ÒÃàª×èÍÁµèÍÊÒ¡ÃÒǹ´ì, ÊÒÂâ·ÃÈѾ·ìáÅÐÃкº·è͹éÓÀÒÂã¹
ËÒ¡ÁÕà¢éÒ´éÇ¡ѹ ¤Óàµ×͹¹ÕéÁÕ¤ÇÒÁÊÓ¤Ñ−ÍÂèÒ§ÂÔè§ã¹¾×é¹·Õ誹º·
à¾×èÍËÅÕ¡àÅÕ觡ÒÃà¡Ô´ä¿¿éÒªç͵ËÃ×ÍÍØ»¡Ã³ì·Ó§Ò¹¼Ô´¾ÅÒ´ ËéÒÁ¾ÂÒÂÒÁ·Ó¡ÒõèÍÊÒ¡ÃÒǹ´ì´éǵÑǤسàͧ
ãËéµÔ´µèͪèҧ俿éÒ·ÕèÁÕ¤ÇÒÁàªÕèÂǪÒ−à¾×èͨѴ¡Òçҹ¹Õé
Ringer Equivalence Number (REN) ·Õè¡Ó˹´ãËé¡ÑºÍØ»¡Ã³ìà·ÍÃìÁÔ¹ÑÅáµèÅеÑÇáÊ´§¶Ö§¨Ó¹Ç¹ÊÙ§ÊØ´¢Í§à·ÍÃìÁÔ¹ÑÅ
·Õèàª×èÍÁµèÍä´é¡ÑºÍÔ¹àµÍÃìà¿«¢Í§â·ÃÈѾ·ì Êèǹ»ÅÒ¢ͧÍÔ¹àµÍÃìà¿«ÍÒ¨»ÃСͺ´éÇÂÍØ»¡Ã³ìµèÒ§æ ·Õè¼ÅÃÇÁ¢Í§ Ringer
Equivalence Numbers µéͧäÁèà¡Ô´¨Ó¹Ç¹ 5
xii Users Manual
ÊËÀÒ¾ÂØâû
»ÃСÒÈà¡ÕèÂǡѺà¤Ã×èͧËÁÒÂáÅÐÁҵðҹ CE ¢Í§ÊËÀÒ¾ÂØâû
¼ÅÔµÀѳ±ì·Õè¼ÅÔµà¾×èͨÓ˹èÒÂã¹ÊËÀÒ¾ÂØâû¨ÐÁÕà¤Ã×èͧËÁÒ Conformité Européene (CE)
«Öè§áÊ´§¶Ö§¤ÇÒÁÊÍ´¤Åéͧ¡Ñº¢éÍ¡Ó˹´áÅÐÁҵðҹ¢Í§ÂØâû ÃÇÁ¶Ö§º·á¡é䢴ѧ·ÕèÃкصèÍ仹Õé ÍØ»¡Ã³ì¹ÕéÂѧÁÕà¤Ã×èͧËÁÒÂÃкØ
Class 2
¢éÍÁÙŵèÍ仹ÕéãªéÊÓËÃѺà¤Ã×èͧ·ÕèÁÕ¡ÒõԴ©ÅÒ¡ CE à·èÒ¹Ñé¹
¤ÓÊÑ觢ͧÊËÀÒ¾ÂØâû
ÍØ»¡Ã³ìÊÒÃʹà·È¹Õéä´é¼èÒ¹¡Ò÷´ÊͺáÅеçµÒÁÁҵðҹ
¢éÍ¡Ó˹´µèÒ§æ ¢Í§¡ÅØèÁ»ÃÐà·ÈÂØâû ¤×Í:
• EMC Directive 89/336/EEC áÅФÓá¡é䢢éͺѧ¤Ñº 92/31/EEC & 93/68/EEC
– EN 55022 Class B
– EN 61000-3-2
– EN 61000-3-3
– EN 55024
• ¢éͺѧ¤Ñºà¡ÕèÂǡѺ俿éÒáç´Ñ¹µèÓ (¤ÇÒÁ»ÅÍ´ÀÑÂ) 73/23/EEC áÅÐ EN 60950(A1/A2/A3/A4/A11)
• ¢éͺѧ¤ÑºÇèÒ´éÇÂÍØ»¡Ã³ìÇÔ·ÂØáÅÐÍØ»¡Ã³ìÊ×èÍÊÒà 199/5/EC
– CTR21 (ËÒ¡ÁÕ¡ÒõԴµÑé§âÁà´çÁÁÒ´éÇÂ)
– ETS 300 328 (ËÒ¡ÁÕ¡ÒõԴµÑé§ÍØ»¡Ã³ìäÇÃìàÅÊ 2.4 ¡Ô¡ÐàÎÔÃ쵫ì)
– ETS 301,489-1 (ËÒ¡ÁÕ¡ÒõԴµÑé§ÍØ»¡Ã³ìäÇÃìàÅÊ 2.4 ¡Ô¡ÐàÎÔÃ쵫ì)
– ETS 301,489-17 (ËÒ¡ÁÕ¡ÒõԴµÑé§ÍØ»¡Ã³ìäÇÃìàÅÊ 2.4 ¡Ô¡ÐàÎÔÃ쵫ì)
¢éÍÁÙÅ¡ÒÃÃѺÃͧ¡ÒÃãªéÇÔ·Âآͧ¡ÅØèÁ»ÃÐà·ÈÂØâû
(ÊÓËÃѺ¼ÅÔµÀѹ±ì·ÕèµÃ§µÒÁ¢éÍ¡Ó˹´à¡ÕèÂǡѺÍØ»¡Ã³ìÇÔ·Âآͧ EU)
ÍØ»¡Ã³ì¹Õé¤×Íà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃìâ¹éµºØê¤ â´ÂÁÕÍØ»¡Ã³ìÃкº LAN Ê×èÍÊÒôéǤÅ×è¹ÇÔ·ÂؾÅѧ§Ò¹µèÓ (ÍØ»¡Ã³ìÊ×èÍÊÒÃäÇÃìàÅÊ
´éǤÅ×蹤ÇÒÁ¶ÕèÇÔ·ÂØ (RF)) ·Ó§Ò¹´éǤÇÒÁ¶Õè 2.4 ¡Ô¡ÐàÎÔÃ쵫ì ÍÒ¨¾ºä´éã¹ à¤Ã×èͧâ¹éµºØꤢͧ¤Ø³à¾×èÍãªéã¹·Õè¾Ñ¡ÍÒÈÑÂ
ËÃ×Íã¹Êӹѡ§Ò¹ ãªé¢éÍÁÙÅÊèǹ¹Õé㹡óշÕèÁÕÍØ»¡Ã³ìµèÒ§æ àËÅèÒ¹Õéà·èÒ¹Ñé¹ â»Ã´´Ù¨Ò¡©ÅÒ¡¢Í§à¤Ã×èͧà¾×è͵ÃǨÊͺà¡ÕèÂǡѺ
ÍØ»¡Ã³ìäÇÃìàÅÊ
ÍÒ¨ÁÕ¡ÒõԴµÑé§ÍØ»¡Ã³ìäÇÃìàÅÊã¹à¤Ã×èͧ¢Í§¤Ø³áÅмèÒ¹Áҵðҹ¢Í§ÊËÀÒ¾ÂØâûËÃ×;×é¹·Õè·Õèà¡ÕèÂÇ¢éͧ ËÒ¡ÁÕ©ÅÒ¡
à¤Ã×èͧËÁÒ CE
áÅÐÁÕËÁÒÂàÅ¢ Notified Body Registration Number áÅÐÊÑ−Åѡɳì Alert µÔ´·Õèà¤Ã×èͧ
à¾ÒàÇÍÃìàÍÒµì¾Øµ¢Í§ÍØ»¡Ã³ìäÇÃìàÅÊËÃ×ÍÍØ»¡Ã³ì·ÕèÍÒ¨µÔ´µÑé§ÁÒã¹à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃìâ¹éµºØꤢͧ¤Ø³ÁÕÃдѺ¡ÒÃÊ觤Å×è¹
¤ÇÒÁ¶ÕèÇÔ·ÂØ RF µèÓ¡ÇèÒ¢Õ´¨Ó¡Ñ´Áҵðҹ¢Í§¤³Ð¡ÃÃÁÒ¸Ô¡ÒâͧÂØâûµÒÁ¢éÍ¡Ó˹´ R&TTE
ÃÒÂÅÐàÍÕ´à¡ÕèÂǡѺ¢éͺѧ¤ÑºµèÒ§æ xiii
â»Ã´´Ù¢éͨӡѴ¢Í§ 802.11b áÅÐ 802.11g ÊÓËÃѺáµèÅлÃÐà·ÈËÃ×ÍÀÙÁÔÀÒ¤¢Í§»ÃÐà·È ã¹ËÑÇ¢éÍ
“¢éͨӡѴ¢Í§à¢µàÈÃÉ°¡Ô¨ÂØâû” ´éÒ¹ÅèÒ§
»ÃСÒȤÇÒÁÊÍ´¤Åéͧ©ºÑºá»Å
[English]
This product follows the provisions of the European Directive 1999/5/EC.
[Danish]
Dette produkt er i overensstemmelse med det europæiske direktiv 1999/5/EC
[Dutch]
Dit product is in navolging van de bepalingen van Europees Directief 1999/5/EC.
[Finnish]
Tämä tuote noudattaa EU-direktiivin 1999/5/EC määräyksiä.
[French]
Ce produit est conforme aux exigences de la Directive Européenne 1999/5/EC.
[German]
Dieses Produkt entspricht den Bestimmungen der Europäischen Richtlinie 1999/5/EC
[Greek]
Το προϊόν αυτό πληροί τις προβλέψεις της Ευρωπαϊκής Οδηγίας 1999/5/ΕC.
[Icelandic]
Þessi vara stenst reglugerð Evrópska Efnahags Bandalagsins númer 1999/5/EC
[Italian]
Questo prodotto è conforme alla Direttiva Europea 1999/5/EC.
[Norwegian]
Dette produktet er i henhold til bestemmelsene i det europeiske direktivet 1999/5/EC.
[Portuguese]
Este produto cumpre com as normas da Diretiva Européia 1999/5/EC.
[Spanish]
Este producto cumple con las normas del Directivo Europeo 1999/5/EC.
[Swedish]
Denna produkt har tillverkats i enlighet med EG-direktiv 1999/5/EC.
¢éͨӡѴ¢Í§à¢µàÈÃÉ°¡Ô¨ÂØâû
xiv Users Manual
¢éͨӡѴ㹾×é¹·ÕèÊÓËÃѺ¡ÒÃãªéÇÔ·ÂØ 802.11b/802.11g
[ËÁÒÂà˵ض֧¼ÙéÃǺÃÇÁ: »ÃСÒȵèÍ仹Õéà¡ÕèÂǡѺ¢éͨӡѴ㹾×é¹·Õè ¨Ðµéͧä´éÃѺ¡ÒÃà¼Âá¾Ãèã¹àÍ¡ÊÒ÷Ñé§ËÁ´¢Í§¼Ùéãªé
·ÕèãËéÁÒ¾ÃéÍÁ¡ÑºÃкºËÃ×ͼÅÔµÀѳ±ì·ÕèÁÕ¼ÅÔµÀѳ±ì Intel PRO/Wireless 2200BG Network Connection]
à¹×èͧ¨Ò¡¤ÇÒÁ¶Õè·Õèãªéâ´ÂÍØ»¡Ã³ì LAN äÃéÊÒ 802.11b/802.11g ÍÒ¨ÂѧäÁèµÃ§¡Ñ¹·Ñé§ËÁ´ã¹·Ø¡»ÃÐà·È ¼ÅÔµÀѳ±ì
802.11b/802.11g ¨Ö§ä´éÑÃѺ¡ÒÃÍ͡Ẻà¾×èÍãËéãªé㹺ҧ»ÃÐà·ÈËÃ×ÍÀÙÁÔÀÒ¤à·èÒ¹Ñé¹
áÅÐäÁèä´éÃѺ͹Ø−ÒµãËé¹Óä»ãªéã¹»ÃÐà·ÈÍ×蹹͡à˹×Í仨ҡ»ÃÐà·È·ÕèÃкØ
㹰ҹмÙéãªé¼ÅÔµÀѳ±ì
¤Ø³ÁÕ˹éÒ·ÕèµÃǨÊͺÇèÒ¼ÅÔµÀѳ±ìÁÕ¡ÒÃãªé§Ò¹à©¾ÒÐã¹»ÃÐà·ÈËÃ×ÍÀÙÁÔÀÒ¤·Õè¡Ó˹´ãËéãªéä´é
áÅÐÁÕ˹éÒ·ÕèµÃǨÊͺÇèÒÁÕ¡ÒáÓ˹´¤èÒâ´Âãªé¤ÇÒÁ¶ÕèáÅЪèͧÊÑ−−Ò³·ÕèàËÁÒÐÊÁ¡Ñº»ÃÐà·ÈËÃ×ÍÀÙÁÔÀÒ¤·Õèãªé§Ò¹
áÅéÇ ¡ÒõÑé觤èÒ·Õè¼Ô´à¾Õé¹仨ҡ¤èÒ·Õè͹Ø−ҵ㹻ÃÐà·ÈËÃ×ÍÀÙÁÔÀÒ¤ ÍÒ¨à»ç¹¡ÒÃÅÐàÁÔ´¡®ËÁÒÂã¹·éͧ¶Ôè¹
áÅеéͧä´éÃѺâ·ÉµÒÁº·ºÑ−−ѵÔáË觡®ËÁÒ¹Ñé¹
¢éÍ¡Ó˹´ÊÓËÃѺÂØâû¹ÕéÁÕãËéÊÓËÃѺãªé§Ò¹ã¹à¢µàÈÃÉ°¡Ô¨ÂØâû
áµè¨ÐÁÕ¡ÒèӡѴ¡ÒâÍ͹Ø−Òµãªé§Ò¹ã¹ºÒ§»ÃÐà·ÈËÃ×ÍÀÙÁÔÀҤ㹻ÃÐà·È ´Ñ§¹Õé:
·ÑèÇä»
ÁҵðҹÂØâû¡Ó˹´¡ÓÅѧÊè§ÊÙ§ÊØ´·Õè 100 mW ¡ÓÅѧÊè§äÍâ«â·Ã»Ô¡·ÕèÁÕ¼Åãªé§Ò¹ (EIRP) áÅЪèǧ¤ÇÒÁ¶ÕèÃÐËÇèÒ§ 2400 – 2483.5
MHz
àºÅàÂÕÂÁ
¼ÅÔµÀѳ±ì¹ÕéÊÒÁÒöãªé§Ò¹¡ÅÒ§á¨é§ä´é áµè¡ÒÃÊè§ÊÑ−−Ò³¡ÅÒ§á¨é§ã¹ÃÐÂÐ 300 àÁµÃ¢Öé¹ä» ¨Ðµéͧä´éÃѺãºÍ¹Ø−Òµ¨Ò¡ BIPT
¢éͨӡѴ¹Õé¤ÇèÐáÊ´§ã¹¤ÙèÁ×ʹѧ¹Õé:
Dans le cas d'une utilisation privée, à l'extérieur d'un bâtiment, au-dessus d'un espace public, aucun enregistrement n'est nécessaire
pour une distance de moins de 300m. Pour une distance supérieure à 300m un enregistrement auprès de l'IBPT est requise. Pour
une utilisation publique à l'extérieur de bâtiments, une licence de l'IBPT est requise. Pour les enregistrements et licences, veuillez
contacter l'IBPT.
½ÃÑè§àÈÊ
ÊÓËÃѺἹ¡ Metropolitan:
2.400 - 2.4835 GHz ÊÓËÃѺ¡ÒÃãªé§Ò¹ã¹ÍÒ¤ÒÃ
2.400 -2.454 GHz (ªèͧÊÑ−−Ò³ 1 ¶Ö§ 7) ÊÓËÃѺãªé§Ò¹¡ÅÒ§á¨é§
ÊÓËÃѺ Guadeloupe, Martinique, St Pierre et Miquelon, Mayotte:
2.400 - 2.4835 GHz ÊÓËÃѺ¡ÒÃãªé§Ò¹ã¹áÅй͡ÍÒ¤ÒÃ
ÊÓËÃѺ Reunion, Guyane:
2.400 - 2.4835 GHz ÊÓËÃѺ¡ÒÃãªé§Ò¹ã¹ÍÒ¤ÒÃ
2.420 -2.4835 GHz ÊÓËÃѺãªé§Ò¹¡ÅÒ§á¨é§ (ªèͧÊÑ−−Ò³ 5 ¶Ö§ 13)
ÃÒÂÅÐàÍÕ´à¡ÕèÂǡѺ¢éͺѧ¤ÑºµèÒ§æ xv
¢éÍÁÙÅâ·Ã¤Á¹Ò¤Á¢Í§¡ÅØèÁ»ÃÐà·ÈÂØâû
(ÊÓËÃѺ¼ÅÔµÀѹ±ì·ÕèÁÕ¡ÒõԴµÑé§âÁà´çÁ·Õèä´éÃѺ¡ÒÃÃѺÃͧâ´Â EU)
¡ÒÃÁÕÊÑ−Åѡɳì
áÊ´§¶Ö§¡Ò÷ÕèÍØ»¡Ã³ì¹ÕéµÃ§µÒÁ¢éͺѧ¤ÑºÇèÒ´éÇÂÇÔ·ÂØáÅÐÍØ»¡Ã³ìÊ×èÍÊÒà 1999/5/EC à¤Ã×èͧËÁÒÂ
´Ñ§¡ÅèÒÇÍØ»¡Ã³ì¹ÕéµÃ§µÒÁËÃ×Í´Õ¡ÇèÒÁҵðҹ·Ò§à·¤¹Ô¤µèÍ仹Õé:
CTR 21 Ð ¤ÇÒÁµéͧ¡ÒÃÊÓËÃѺÁҵðҹᾹÂÙâÃà»Õ¹㹡ÒÃàª×èÍÁµè͡Ѻà¤Ã×Í¢èÒÂÊÇÔ·ªìâ·ÃÈѾ·ìÊÒ¸ÒóÐá͹ÒÅçÍ¡ (PSTNs)
ËÃ×Í TE (äÁèÃÇÁºÃÔ¡ÒÃàÊÕ§·Ò§â·ÃÈѾ·ì¢Í§ TE) ·ÕèÁÕ¡ÒÃÃкØã¹à¹çµàÇÔÃì¡ ËÒ¡ÁÕ¨ÐËÁÒ¶֧¡Ò÷ÕèãªéÊÑ−−Ò³ Dual Tone MultiFrequency (DTMF)
áÁéÇèÒÍØ»¡Ã³ì¹Õé¨ÐÊÒÁÒöãªéä´é·Ñé§ÊÑ−−Ò³ÅÙ» (pulse) ËÃ×Í DTMF (tone) ¡çä´é áµèÁÕà¾Õ§¡Ò÷ӧҹã¹ÊÑ−−Ò³
DTMF ·ÕèµÃ§µÒÁ¢éͺѧ¤ÑºÊÓËÃѺ¡Ò÷ӧҹµÒÁ»¡µÔ ¨Ö§á¹Ð¹ÓãËéµÑ駤èÒÍØ»¡Ã³ìãËéãªéÊÑ−−Ò³ DTMF à¾×èÍ
à¢éÒãªé§Ò¹ºÃÔ¡Òéءà©Ô¹ÊÒ¸ÒóÐËÃ×ÍÊèǹµÑÇ ÊÑ−−Ò³ DTMF ÂѧªèÇÂãËé¡ÒõÑ駤èÒ¡ÒÃâ·Ã·Óä´éàÃçÇ¢Öé¹´éÇÂ
ÍØ»¡Ã³ì¹ÕéµÃ§µÒÁ¢éͺѧ¤Ñº¢Í§¤³Ð¡ÃÃÁÒ¸Ô¡ÒþԨÒÃ³Ò 98/482/EEC "CTR 21" ÊÓËÃѺᾹÂÙâÃà»Õ¹ à¡ÕèÂǡѺÍØ»¡Ã³ì
·ÕèÁÕ¡ÒÃàª×èÍÁµè͡Ѻ Public Switched Telephone Network (PSTN)
ÍÂèÒ§äáçµÒÁ à¹×èͧ¨Ò¡¤ÇÒÁᵡµèÒ§ÃÐËÇèÒ§ PSTN ·ÕèÁÕã¹áµèÅлÃÐà·È ¡ÒÃÃѺÃͧ¹Õé¨Ö§äÁèÃѺ»ÃСѹ¡Ò÷ӧҹä´é¡Ñº·Ø¡æ
PSTN ËÒ¡à¡Ô´»Ñ−ËÒ ¤Ø³¤ÇõԴµèͺÃÔÉÑ·¼Ùé¼ÅÔµà¾×èÍ¢ÍÃѺ¤ÇÒÁªèÇÂàËÅ×ͷҧ෤¹Ô¤
xvi Users Manual
¡ÒÃãªéàÍ¡ÊÒÃ
¢ÍáÊ´§¤ÇÒÁÂÔ¹´Õ¡Ñº¡ÒÃàÅ×Í¡«×éͤÍÁ¾ÔÇàµÍÃìâ¹éµºØꤷÕèÁÒ¾ÃéÍÁ¡ÑºÃкº»¯ÔºÑµÔ¡Òà Windows® XP äÁèÇèҤس¨ÐÂѧãËÁè¡Ñº¡ÒÃãªé
¤ÍÁ¾ÔÇàµÍÃìẺ¾¡¾ÒËÃ×Íà»ç¹¼Ùéãªé·ÕèÁÕ»ÃÐʺ¡ÒÃ³ì ¤ÙèÁ×Í¡ÒÃãªéÊÒÁÒöªèÇÂãËé¤Ø³ÊÒÁÒöãªé»ÃÐ⪹ìÊÙ§ÊØ´ä´é¨Ò¡à¤Ã×èͧ
¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³
¡ÒèѴÃٻẺàÍ¡ÊÒÃ
äͤ͹¢éÍÁÙÅ
ã¹àÍ¡ÊÒùÕé¨ÐÁÕ¡ÒÃãªéäͤ͹áÅТéͤÇÒÁÊÒÁ»ÃÐàÀ· äͤ͹¢éÍÁÙŨлÃÒ¡¯ÍÂÙè¡è͹¢Ñ鹵͹/¢éÍÁÙÅ·ÕèÁÕ:
¤Óàµ×͹:
áÊ´§¶Ö§¡ÒÃÍÒ¨·ÓãËéà¡Ô´ÍѹµÃÒ¡ѺÃèÒ§¡ÒÂä´é
¢éͤÇÃÃÐÇѧ:
àµ×͹¤Ø³à¡ÕèÂǡѺâÍ¡ÒÊ㹡ÒêÓÃØ´¢Í§ÍØ»¡Ã³ìËÃ×Í¢éÍÁÙÅ
ËÁÒÂà˵Ø:
á¨é§à¡ÕèÂǡѺʶҹ¡Òóì¾ÔàÈÉ
¢éÍÁÙŷҧ෤¹Ô¤:
á¨é§¤Ø³à¡ÕèÂǡѺ¤ÇÒÁµéͧ¡ÒþÔàÈÉËÃ×Í¢éͨӡѴ¢Í§¡ÒÃãªé§Ò¹ÍØ»¡Ã³ìµèÒ§æ
¡ÒèѴàÃÕ§á»é¹¾ÔÁ¾ì
»ØèÁµèÒ§æ ·Õè¤Ø³µéͧ¡´à¾×èÍãªé¿Ñ§¡ìªÑ¹µèÒ§æ ¨Ð»ÃÒ¡¯ÍÂÙè㹤ÙèÁ×ÍÀÒÂã¹à¤Ã×èͧËÁÒÂǧàÅçº µÑÇÍÂèÒ§àªè¹:
<Ctrl> ËÁÒ¶֧¡ÒÃãªé»ØèÁ control (Ctrl º¹á»é¹¾ÔÁ¾ì)
㹡óշÕèµéͧ¡´»ØèÁÊͧ»ØèÁ¾ÃéÍÁ¡Ñ¹ ¨ÐÁÕ¡ÒÃáÊ´§ª×èÍ»ØèÁ·Ñé§Êͧâ´ÂÁÕà¤Ã×èͧËÁÒºǡ µÑÇÍÂèÒ§àªè¹:
<Fn+F8> ËÁÒ¶֧¡Ò÷Õè¤Ø³µéͧ¡´»ØèÁ Fn ¤éÒ§äÇéáÅéÇ¡´»ØèÁ F8
¡ÒÃãªéàÍ¡ÊÒà 1
¡ÒáÓ˹´ª×èÍãËé¡ÑºÍØ»¡Ã³ì«Õ´ÕÃÍÁ
ã¹â»Ãá¡ÃÁµÔ´µÑé§ËÅÒÂæ â»Ãá¡ÃÁ¤Ø³µéͧ·Óâ´ÂµÔ´µÑ駨ҡ«Õ´ÕÃÍÁ ÅӴѺ¡ÒõԴµÑé§â»Ãá¡ÃÁ¨Ð¶×ÍÇèÒä´Ã¿ì«Õ´ÕÃÍÁ¤×Íä´Ã¿ì d:\
ÍÂèÒ§äáçµÒÁÍÒ¨¨ÐäÁè¨Óà»ç¹àÊÁÍä» ÍÑ¡ÉÃÃкØä´Ã¿ì«Õ´ÕÃÍÁÍÒ¨à»ç¹ÍÑ¡ÉÃÍ×è¹·ÕèµÒÁËÅѧª×èÍÎÒÃì´ä´Ã¿ìµÑÇÊØ´·éÒÂã¹à¤Ã×èͧ¡çä´é
µÑÇÍÂèÒ§àªè¹ ËÒ¡ÎÒÃì´´ÔÊ¡ì¢Í§¤Ø³ÁÕ¡ÒÃáºè§¾ÒÃì·ÔªÑ¹ ¨Ð·ÓãËéÎÒÃì´´ÔÊ¡ìà»ç¹ä´Ã¿ì C: áÅÐ D: áÅÐä´Ã¿ì«Õ´ÕÃÍÁ¤×Íä´Ã¿ì E:
¡ÒÃãªé§Ò¹·Ñªá¾´
¤Ø³ÍÒ¨ä´éÃѺ¡ÒâÍãËé¤ÅÔ¡ËÃ×ʹѺàºÔŤÅÔ¡·ÕèÃÒ¡Ò÷Õè»ÃÒ¡¯º¹Ë¹éÒ¨Í ¡ÒÃãªé§Ò¹·Ñªá¾´¨Ð·Ó§Ò¹àËÁ×͹¡Ñº¡ÒÃãªéàÁÒÊì
ẺÅéÍ ËÒ¡ÁÕ¤ÇÒÁᵡµèÒ§¨ÐÁÕ¡ÒÃ͸ԺÒÂäÇéâ´ÂÍÐàÍÕ´
Íͺਡµì·Õèµéͧ¤ÅÔ¡¨Ð¶Ù¡áÊ´§à»ç¹¢éͤÇÒÁ µÑÇË¹Ò ËÃ×ÍáÊ´§à»ç¹ÍÑ¡ÉõÑÇàÅç¡ àªè¹ »ØèÁ Start
»ÃÒ¡¯¢Öé¹·Õè´éÒ¹¢ÇÒ =>
Table 1. ¡ÒäÅÔ¡·Ñªá¾´
¡Ò÷ӧҹ
¡Ãкǹ¡ÒÃ
¤ÅÔ¡
¡´»ØèÁ«éÒ¢ͧ·Ñªá¾´áÅéÇ»ÅèÍÂ
´ÑºàºÔŤÅÔ¡
¤ÅÔ¡»ØèÁ«éÒ¢ͧ·Ñªá¾´Êͧ¤ÃÑé§â´ÂàÃçÇ
¡ÒÃãªé§Ò¹ÇÔ¹â´ÇÊì:
â»Ãá¡ÃÁ Windows à¡×ͺ·Ñé§ËÁ´¨ÐÁÕ¡ÒÃáÊ´§ª×èÍ/¿Ñ§¡ìªÑ¹¢Í§»ØèÁËÃ×Íäͤ͹ËÒ¡¤Ø³àÅ×è͹¾Í¹ìàµÍÃì¢Í§·Ñªá¾´
ä»ÇÒ§äÇéà˹×ÍÃÒ¡Ò÷Õè¤Ø³µéͧ¡ÒÃÃÙé¢éÍÁÙÅ
¤ÙèÁ×Í¡ÒÃãªé«Í¿µìáÇÃì
¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³¶Ù¡¨Ñ´Êè§ÁÒ¨Ò¡âç§Ò¹â´ÂÁÕ¡ÒõԴµÑé§â»Ãá¡ÃÁµèÒ§æ ÁÒãËéÅèǧ˹éÒáÅéÇ â´Â·Õè«Í¿µìáÇÃìµèÒ§æ ÍÒ¨ÁÕ¤ÙèÁ×Í
¡ÒÃãªéÍ͹äŹìËÃ×Í©ºÑº¾ÔÁ¾ì ãËéãªé¢éÍÁÙŨҡàÍ¡ÊÒÃËÃ×͵ÑÇàÅ×Í¡ÇÔ¸Õãªé㹫ͿµìáÇÃìà¾×èÍ´Ù¢éÍÁÙÅà¾ÔèÁàµÔÁ
ÃÙ»áÅÐÀÒ¾»ÃСͺ㹤ÙèÁ×͹ÕéÍÒ¨äÁèàËÁ×͹¡Ñºà¤Ã×èͧ¢Í§¤Ø³
ËÁÒÂà˵Øà¡ÕèÂǡѺäͤ͹·ÑèÇä»:
äͤ͹ºÒ§ª¹Ô´·Õèãªéã¹ Windows XP ÍÒ¨»ÃÒ¡¯º¹·ÒÊ¡ìºÒÃìä´éâ´Â¡ÒÃàÅ×Í¡ (àªè¹: àÅ×Í¡µÑÇàÅ×Í¡ Place the
volume icon in the taskbar) ã¹ä´ÍÐÅçÍ¡ºçÍ¡«ì Properties
2 ¤ÙèÁ×ͼÙéãªé
àÃÔèÁµé¹
ÃÙé¨Ñ¡¡Ñºà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³
ÁØÁÁͧ´éҹ˹éÒ
ÊÅÑ¡ÂÖ´¨Í LCD
¨Í LCD
»ØèÁ AVStation Premium (¹.
40)/ AVStation now (¹. 53)
¿áÊ´§Ê¶Ò¹Ð
(¹. 14)
»ØèÁà¾ÒàÇÍÃì
á»é¹¾ÔÁ¾ì (¹. 8)
ÅÓ⾧ («éÒÂ)
ÊÅç͵àÁâÁÃÕè¡ÒÃì´
(¹. 29)
¿áÊ´§Ê¶Ò¹Ð
(¹. 14)
·Ñªá¾´ (¹. 11)
ÅÓ⾧ (¢ÇÒ)
»ØèÁ¢Í§·Ñªá¾´
àÃÔèÁµé¹ 3
ÁØÁÁͧ´éÒ¹¢ÇÒ
ä´Ã¿ì«Õ´Õ
(µÑÇàÅ×Í¡ ¹. 21)
¾ÍÃìµ USB
(2.0)
ÁØÁÁͧ´éÒ¹«éÒÂ
äÁâ¤Ã⿹ á¨ç¤
á¨ê¤àδ⿹ / á¨ç¤ S/PDIF
¾ÍÃìµÅçÍ¡à¾×èÍ»éͧ¡Ñ¹
à¤Ã×èͧÊÙ−ËÒ (¹. 114)
¾ÍÃìµ 1394
(6 ¢Ò)
¾ÍÃìµâÁà´çÁ
(¹. 60)
¾ÍÃìµ LAN
(¹. 61)
4 ¤ÙèÁ×ͼÙéãªé
¾Ñ´ÅÁÃкÒÂ
¤ÇÒÁÃé͹
ÊÅç͵¡ÒÃì´ PCMCIA
(¹. 32)
ÁØÁÁͧ´éÒ¹ËÅѧ
¾ÍÃìµ USB (2.0)
á¨ç¤ DC
ẵàµÍÃÕè
(¹. 108)
¾ÍÃ×µàÍÒµì¾Øµ TV ¾ÍÃìµÁ͹ÔàµÍÃì
(S-Video)
ÁØÁÁͧ´éÒ¹ÅèÒ§
ÊÅÑ¡ÂִẵàµÍÃÕè
ªèͧãÊè˹èǤÇÒÁ¨Ó
(¹. 112)
ªèͧãÊèÎÒÃì´´ÔÊ¡ì
¡ÒöʹËÃ×ÍãÊèÎÒÃì´´ÔÊ¡ì¨Ð·ÓãËé¡ÒÃÃѺ»ÃСѹÊÔé¹Êشŧ ¡ÒÃà»ÅÕè¹ÎÒÃì´´ÔÊ¡ì â»Ã´µÔ´µèÍÈÙ¹ÂìºÃÔ¡Òâͧ
Samsung ·Õèã¡Åé·ÕèÊØ´
àÃÔèÁµé¹ 5
¡ÒÃà»Ô´áÅлԴà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì
¡ÒÃà»Ô´à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì
1. ãÊèẵàµÍÃÕèáÅéǵèÍÊÒÂ俢ͧÍÐá´»àµÍÃì AC µÒÁÇÔ¸Õ¡Òâͧ¤Óá¹Ð¹Ó㹡ÒõԴµÑé§
2. àÅ×è͹ÊÅÑ¡ÂÖ´ LCD ä»·Ò§¢ÇÒ ¨Ò¡¹Ñé¹à»Ô´Ë¹éÒ¨Í LCD ¢Öé¹
3. ¡´»ØèÁà¾ÒàÇÍÃì
¡ÒûԴà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì
1. ¤ÅÔ¡»ØèÁ start (
) ·Õè·ÒÊ¡ìºÒÃì
2. ¤ÅÔ¡àÅ×Í¡ Turn Off Computer.
3. ¤ÅÔ¡ Turn Off
6 ¤ÙèÁ×ͼÙéãªé
ËÒ¡à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃìäÁè»Ô´ à¹×èͧ¨Ò¡à¡Ô´¤ÇÒÁ¼Ô´¾ÅÒ´¢Í§Ãкº ãËé¡´»ØèÁ <Ctrl>+<Alt>+<Delete> àÁ×èÍ
»ÃÒ¡¯ä´ÍÐÅçÍ¡ºçÍ¡«ì [Windows Task Manager] ¢Öé¹ ãËé¤ÅÔ¡ Shut Down > Turn Off à¾×èͻԴà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì
§Ò¹·ÕèÂѧäÁèä´éºÑ¹·Ö¡ÍÒ¨ÊÙ−ËÒÂ/àÊÕÂËÒÂä´é
ËÒ¡¡Òá´»ØèÁ <Ctrl>+<Alt>+<Delete> äÁèÊÒÁÒöãªé§Ò¹ä´é ãËé¡´»ØèÁà¾ÒàÇÍÃì¤éÒ§äÇéÍÕ¡ 4 ÇÔ¹Ò·Õà¾×èͻԴ
à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì §Ò¹·ÕèÂѧäÁèä´éºÑ¹·Ö¡ÍÒ¨ÊÙ−ËÒÂ/àÊÕÂËÒÂä´é àÁ×èͤسà»Ô´à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì¤ÃÑé§¶Ñ´ä» Ãкº¨Ð
·Ó¡ÒõÃǨÊͺ´ÔÊ¡ì
àÃÔèÁµé¹ 7
¡ÒÃãªéá»é¹¾ÔÁ¾ì
¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³ÁÕ»ØèÁ·Ñé§ËÁ´ 88 »ØèÁ ¡Òá´»ØèÁ·Õè¡Ó˹´¾ÃéÍÁ¡Ñ¹ ¤Ø³ÊÒÁÒöà¢éÒãªé¿Ñ§¡ìªÑ¹ËÅÑ¡æ
ä´éàËÁ×͹¡Ñº¡ÒÃãªéá»é¹¾ÔÁ¾ìÁҵðҹ
¿Ñ§¡ìªÑ¹áÅлØèÁà¾×èͧҹ¾ÔàÈÉ
»ØèÁ¿Ñ§¡ìªÑ¹
»ØèÁ
Windows
»ØèÁµÑÇàÅ¢
»ØèÁá;¾ÅÔपѹ
»ÃѺ¤ÇÒÁÊÇèÒ§¢Í§Ë¹éÒ¨ÍáÅÐ
¤ÇÒÁ´Ñ§àÊÕ§/»ØèÁ·ÔÈ·Ò§
áÁéÇèÒ¡ÒèѴàÃÕ§¢Í§»ØèÁµèÒ§æ ã¹á»é¹¾ÔÁ¾ì¢Í§à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³¨Ðᵡµèҧ仨ҡá»é¹¾ÔÁ¾ì¢Í§
à¤Ã×èͧà´Ê¡ì·Í» áµè¤ÇÒÁÃÙéÊ֡㹡ÒÃãªé§Ò¹¨ÐäÁèÁÕ¤ÇÒÁᵡµèÒ§¡Ñ¹áµèÍÂèÒ§ã´
»ØèÁµèÒ§æ º¹á»é¹¾ÔÁ¾ìÍÒ¨¨Ñ´¡ÅØèÁËÅÑ¡æ ä´é´Ñ§¹Õé:
• á»é¹¾ÔÁ¾ìÁҵðҹ·Õè»ÃСͺ´éÇÂÍÑ¡¢ÃеèÒ§æ áÅÐÁÕ¡ÒèѴàÃÕ§àËÁ×͹¡Ñºá»é¹¾ÔÁ¾ì¢Í§¾ÔÁ¾ì´Õ´Áҵðҹ
áÅÐãªéà¾×èÍ»é͹¢éͤÇÒÁ »ØèÁ Windows ·Õè·Ñé§Êͧ´éÒ¹¢Í§ spacebar ãªéà»Ô´àÁ¹ÙµèÒ§æ ¢Í§ÇÔ¹â´ÇÊìáÅзÓ˹éÒ·Õè
¿Ñ§¡ìªÑ¹¾ÔàÈÉÍ×è¹æ
• àÁ×èÍ¡´»ØèÁ¿Ñ§¡ìªÑ¹ ¾ÃéÍÁ¡Ñº¡´»ØèÁ <Fn> ¨Ð·Ó§Ò¹µÒÁ¿Ñ§¡ìªÑ¹¾ÔàÈɵèÒ§æ
• à¤ÍÃìà«ÍÃìáÅлØèÁ¤Çº¤ØÁãªéàÅ×è͹à¤ÍÃìà«ÍÃ캹˹éÒ¨Í â´ÂÍÒ¨·Ó§Ò¹ã¹¿Ñ§¡ìªÑ¹Í×è¹æ â´Â¢Ö鹡Ѻ«Í¿µìáÇÃì¢Í§¤Ø³
¡Ò÷ӤÇÒÁÊÐÍÒ´á»é¹¾ÔÁ¾ì¢Í§¤ÍÁ¾ÔÇàµÍÃì ãËéãªé¼éÒ½éÒÂËÁÒ´æ àªç´·Ó¤ÇÒÁÊÐÍÒ´ àªç´»ØèÁáÅмÔÇÃÍºæ ¢Í§»ØèÁµèÒ§æ
ËéÒÁãËé¢Í§àËÅÇˡŧã¹á»é¹¾ÔÁ¾ìÁԩйÑé¹ÍÒ¨·ÓãËéá»é¹¾ÔÁ¾ìàÊÕÂËÒÂä´é
8 ¤ÙèÁ×ͼÙéãªé
¡ÒÃãªéá»é¹¾ÔÁ¾ìµÑÇàÅ¢
á»é¹¾ÔÁ¾ì¢Í§¤Ø³¨ÐÁÕ»ØèÁµÑÇàÅ¢ «Öè§à»ç¹¡ÅØèÁ¢Í§»ØèÁ·Õè¤Ø³ÊÒÁÒöãªé¾ÔÁ¾ìµÑÇàÅ¢áÅÐÊÑ−ÅѡɳìµèÒ§æ ·Ò§¤³ÔµÈÒʵÃìä´é
àªè¹à¤Ã×èͧËÁÒºǡ ËÁÒÂàÅ¢ËÃ×ÍÊÑ−Åѡɳì·ÕèÊèǹÁØÁ¢Í§»ØèÁ¡´áµèÅлØèÁ¨ÐÁÕÊÑ−ÅѡɳìáÊ´§¿Ñ§¡ìªÑ¹·Ò§¤³ÔµÈÒʵÃì
ËÅÍ´ LED áÊ´§
Num Lock
¡´»ØèÁ <Fn+Num Lock> à¾×èÍà»Ô´ãªé§Ò¹¿Ñ§¡ìªÑ¹»ØèÁµÑÇàÅ¢ ¿Ñ§¡ìªÑ¹µÑÇàÅ¢¢Í§á»é¹¾ÔÁ¾ì¨Ð¶Ù¡à»Ô´ãªé§Ò¹àÁ×èÍä¿ LED ¢Í§ Num Lock
µÔ´ÍÂÙè (”¤ÇÒÁËÁÒ¢ͧä¿áÊ´§Ê¶Ò¹Ð” (¹. 14) ÊÓËÃѺµÓáË¹è§¢Í§ä¿ Num Lock)
àÁ×èÍÁÕ¡ÒÃà»Ô´ãªé¿Ñ§¡ìªÑ¹µÑÇàÅ¢ ¤Ø³ÍÒ¨¡ÅѺä»ãªé¿Ñ§¡ìªÑ¹»¡µÔ¢Í§»ØèÁä´éâ´Â¡Òá´»ØèÁ¹Ñé¹áÅлØèÁ <Fn> µÑÇÍÂèÒ§àªè¹ ¡ÒþÔÁ¾ì
ÍÑ¡Éà m ¡´ <Fn+M> ¡Ò÷ӧҹ¹Õé¨ÐáÊ´§ÍÑ¡Éà m
¡ÒûԴ»ØèÁµÑÇàÅ¢ ãËé¡´»ØèÁ <Fn+Num Lock> ÍÕ¡¤ÃÑé§ ä¿ LED ¢Í§ Num Lock ¨Ð´Ñºä»
àÃÔèÁµé¹ 9
¡ÒÃãªé»ØèÁ¿Ñ§¡ìªÑ¹¾ÔàÈÉ
»ØèÁ¿Ñ§¡ìªÑ¹¨ÐàÃÕ¡ãªé¿Ñ§¡ìªÑ¹¾ÔàÈɵèÒ§æ àÁ×èÍÁÕ¡Òá´¾ÃéÍÁ¡Ñº»ØèÁÍ×è¹æ
¡ÒÃãªé»ØèÁ <Fn> ¼ÊÁ
ª×èÍ»ØèÁ
¿Ñ§¡ìªÑ¹¢Í§»ØèÁ
<Esc/
>
Rest
·ÓãËé¤ÍÁ¾ÔÇàµÍÃìà¢éÒÊÙèâËÁ´ suspended ¡ÒÃÍÍ¡¨Ò¡âËÁ´ suspended ãËé¡´»ØèÁà¾ÒàÇÍÃì (¹.
104)
<F2/
>
Gauge
áÊ´§áËÅ觾Åѧ§Ò¹»Ñ¨¨ØºÑ¹áÅлÃШØä¿¿éÒ·ÕèàËÅ×Í
<F4/
>
LCD/CRT
ÊÅѺ˹éÒ¨ÍÃÐËÇèÒ§¨Í LCD áÅÐ˹éҨ͵è;èǧÀÒ¹͡àÁ×èÍÁÕ¡ÒÃàª×èÍÁµèͨÍÀÒ¹͡
(¹. 102)
<F5/Backlit>
ä¿´éÒ¹ËÅѧ
à»Ô´áÅлԴ LCD
<F6/Mute>
µÑ´àÊÕ§
à»Ô´áÅлԴàÍÒµì¾ØµàÊÕ§
<F7/SRS>
SRS
¤Ø³ÊÁºÑµÔ¹ÕéªèÇÂãËé¤Ø³ä´éÊÑÁ¼ÑʡѺÃкºàÊÕ§ẺÊàµÃÔâÍ·Õèà»ç¹¸ÃÃÁªÒµÔ ¤Ø³ÊÒÁÒöàÅ×Í¡
âËÁ´µèÍ仹Õé â´Â¡´»ØèÁ
ËÁÒÂà赯 âËÁ´ WOW XT ON: àÅ×Í¡à¾×èͿѧ´¹µÃÕ
âËÁ´ TruSurround XT ON : àÅ×Í¡à¾×èͪÁÀҾ¹µÃì
âËÁ´ SRS OFF : µÑ´¡Ò÷ӧҹ¢Í§ SRS
¿Ñ§¡ìªÑ¹ SRS ¨Ðãªéä´é੾ÒСѺÅÓ⾧㹵ÑǢͧ¤ÍÁ¾ÔÇàµÍÃìáÅÐàδ⿹à·èÒ¹Ñé¹
áÅÐäÁèÊÒÁÒöãªé§Ò¹¼èÒ¹¾ÍÃìµ S/PDIF
<F8/
>
Wireless LAN
à»Ô´/»Ô´
à»Ô´áÅлԴãªé§Ò¹ wireless LAN ÊÓËÃѺà¤Ã×èͧÃØè¹·ÕèÁÕ¡ÒõԴµÑé§ÍØ»¡Ã³ì wireless LAN
<F9/
>
·Ñªá¾´
à»Ô´áÅлԴ¿Ñ§¡ìªÑ¹·Ñªá¾´
âËÁ´ Etiquette
¤Ø³ÊÒÁÒöàÅ×Í¡âËÁ´ Etiquette àÁ×è͵éͧ¡ÒÃÃкº¡Ò÷ӧҹ·Õèà§Õº
<F11/Num Lock>
Number Lock
à»Ô´ãªé»ØèÁµÑÇàÅ¢ (¹. 9)
<F12/Scroll>
Scroll Lock
àÅ×è͹˹éҨ͢Öé¹áÅÐŧâ´Â·ÕèäÁèà»ÅÕè¹µÓá˹觢ͧà¤ÍÃìà«ÍÃìÀÒÂã¹á;¾ÅÔपѹºÒ§ »ÃÐàÀ·
<F10/
>
<
/
>
Volume Down
Å´¤ÇÒÁ´Ñ§¢Í§àÊÕ§
<
/
>
Volume Up
à¾ÔèÁ¤ÇÒÁ´Ñ§¢Í§àÊÕ§
<
/
>
Brightness Up
»ÃѺà¾ÔèÁ¤ÇÒÁÊÇèÒ§¢Í§¨Í LCD
<
/
>
Brightness Down
»ÃѺŴ¤ÇÒÁÊÇèÒ§¢Í§¨Í LCD
àÁ×èͤس¡´»ØèÁ¿Ñ§¡ìªÑ¹¾ÃéÍÁ¡Ñ¹ àÊÕ§¢Í§Ãкº¨Ð¶Ù¡µÑ´ä»ªÑèǤÃÒÇ
10 ¤ÙèÁ×ͼÙéãªé
¡ÒÃãªé·Ñªá¾´
ã¹ Windows ¤Ø³¨ÐàËç¹ÃÙ»¡ÃÒ¿Ô¡àÅç¡æ º¹Ë¹éÒ¨ÍàÊÁÍ «Öè§áÊ´§µÓá˹觷Õè¤Ø³ÊÒÁÒöÊÑ觧ҹµèÍä»ä´é ÃÙ»àÅç¡æ
¹ÕéàÃÕ¡ÇèҾ͹ìàµÍÃì «Öè§â´Â»¡µÔ¨ÐáÊ´§à»ç¹ÃÙ»ÅÙ¡Èà ( ) ËÃ×͵ÑÇ I ( )
·Ñªá¾´
»ØèÁµèÒ§æ ¢Í§·Ñªá¾´
·Ñªá¾´·Õèà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³ªèÇÂãËé¤Ø³ÊÒÁÒöàÅ×è͹¾Í¹ìàµÍÃìä»ÁÒº¹¨Í LCD ä´é àªè¹à´ÕÂǡѺ¡ÒÃãªéàÁÒÊìà¾×èÍ
àÅ×è͹ã¹à¤Ã×èͧà´Ê¡ì·Í» »ØèÁ¢Í§·Ñªá¾´ªèÇÂãËé¤Ø³ÊÒÁÒöÊÑ觧ҹ¾Í¹ìàµÍÃìä´é àªè¹ ¡ÒÃàÅ×Í¡ÃÒ¡ÒÃËÃ×Í¡ÒÃãªé¤ÓÊÑè§
¡ÒÃÅçͤ·Ñªá¾´
¤Ø³ÊÒÁÒöÅçͤ·Ñªá¾´ áÅÐãªé੾ÒÐá»é¹¾ÔÁ¾ìáÅÐàÁÒÊì 㹡ÒÃÅçͤ·Ñªá¾´ ãËé¡´»ØèÁ <Fn> + <F9> ¾ÃéÍÁ¡Ñ¹
àÃÔèÁµé¹ 11
¤Ø³ÊÒÁÒöÊÑ觧ҹµèÒ§æ ä´éâ´Âãªé·Ñªá¾´ ´Ñ§¤Ó͸ԺÒµèÍ仹Õé
d
¡Ò÷ӧҹ
¿Ñ§¡ìªÑ¹
¡Ãкǹ¡ÒÃ
àÅ×è͹
àÅ×è͹¾Í¹ìàµÍÃì
ÇÒ§¹ÔéÇŧº¹·Ñªá¾´áÅéÇàÅ×è͹¹ÔéÇä»ã¹
·ÔÈ·Ò§·Õèµéͧ¡ÒÃ
¤ÅÔ¡
àÅ×Í¡Íͺਡµì à»Ô´àÁ¹Ù ËÃ×ͤÅÔ¡»ØèÁ
àÅ×è͹¾Í¹ìàµÍÃìä»äÇéà˹×ÍÍͺਡµì·Õè µéͧ¡ÒÃ
ãËé¡´»ØèÁ«éÒ¢ͧ·Ñªá¾´Ë¹Ö觤ÃÑé§
ËÃ×͹Ӿ͹ìàµÍÃìä»ÇÒ§äÇéà˹×ÍÍͺਡµì
áÅéÇãªé¹ÔéÇá·ç»·Õè·Ñªá¾´Ë¹Ö觤ÃÑé§
´ÑºàºÔŤÅÔ¡
à»Ô´â»Ãá¡ÃÁËÃ×Íà»Ô´ä¿Åì
àÅ×è͹¾Í¹ìàµÍÃìä»äÇéà˹×ÍÍͺਡµì ãËé¡´
»ØèÁ«éÒ¢ͧ·Ñªá¾´Ë¹Ö觤ÃÑé§
ËÃ×͹Ӿ͹ìàµÍÃìä»ÇÒ§äÇéà˹×ÍÍͺਡµì
áÅéÇãªé¹ÔéÇá·ç»·Õè·Ñªá¾´Êͧ¤ÃÑé§ÍÂèÒ§àÃçÇ
12 ¤ÙèÁ×ͼÙéãªé
¤ÅÔ¡¢ÇÒ
áÊ´§àÁ¹Ùªç͵¤Ñ·
àÅ×è͹¾Í¹ìàµÍÃìä»äÇéà˹×ÍÍͺਡµì·Õè
µéͧ¡Òà áÅéÇ¡´»ØèÁ¢ÇҢͧ·Ñªá¾´Ë¹Ö觤ÃÑé§
ÅÒ¡
àÅ×è͹Íͺਡµì ËÃ×ÍàÅ×Í¡¾×é¹·Õè·ÕèÁÕ
ËÅÒÂÍͺਡµì
ÅÒ¡áÅÐÇÒ§ä»ÂѧµÓá˹觷Õèµéͧ¡ÒÃ
¡Ò÷ӧҹ
¿Ñ§¡ìªÑ¹
¡Ãкǹ¡ÒÃ
àÅ×è͹
áÊ´§Êèǹº¹/ÅèÒ§/«éÒÂ/¢ÇÒ ¢Í§
à¹×éÍËÒã¹ÇÔ¹â´Çì
ÇÒ§¹ÔéÇ·Õè¢Íº¢ÇÒËÃ×ͧ͢ÅèÒ§¢Í§·Ñªá¾´áÅéÇ
àÅ×è͹ã¹á¹ÇµÑé§ËÃ×Íá¹Ç¹Í¹
(ãªéä´é੾ÒСѺá;¾ÅÔपѹºÒ§»ÃÐàÀ·
à·èÒ¹Ñé¹)
¡ÃسÒãªé·Ñªá¾´â´Âãªé¹ÔéÇà·èÒ¹Ñé¹ ¡ÒÃãªéÍØ»¡Ã³ì·ÕèáËÅÁ¤ÁÍÒ¨·ÓãËé·Ñªá¾´àÊÕÂËÒÂä´é
¡ÒÃÊÑ觧ҹ·Ñªá¾´ËÃ×Í»ØèÁ¢Í§·Ñªá¾´¢³Ð·ÕèºÙµà¤Ã×èͧÍÒ¨·ÓãËéàÇÅÒ㹡Òúٵ Windows à¾ÔèÁ¢Öé¹
àÃÔèÁµé¹ 13
¤ÇÒÁËÁÒ¢ͧä¿áÊ´§Ê¶Ò¹Ð
áÊ´§Ê¶Ò¹Ð¡Ò÷ӧҹ¢Í§¤ÍÁ¾ÔÇàµÍÃì
14 ¤ÙèÁ×ͼÙéãªé
Num Lock
¨ÐµÔ´àÁ×èÍÁÕ¡ÒÃãªé§Ò¹»ØèÁµÑÇàÅ¢
Caps Lock
¨ÐµÔ´àÁ×èÍÁÕ¡ÒÃãªé§Ò¹ÍÑ¡ÉõÑǾÔÁ¾ìãË−è
Scroll Lock
¨ÐµÔ´àÁ×èÍÁÕ¡ÒáÓ˹´ãËéàÅ×è͹˹éҨ͢Öé¹áÅÐŧâ´Â·ÕèäÁèà»ÅÕè¹µÓá˹觢ͧà¤ÍÃìà«ÍÃìÀÒÂã¹
á;¾ÅÔपѹºÒ§»ÃÐàÀ·
Hard disk drive
¡ÃоÃÔºàÁ×èÍÎÒÃì´´ÔÊ¡ìÁÕ¡Ò÷ӧҹ
Wireless LAN
¨ÐµÔ´àÁ×èÍÁÕ¡ÒÃãªé§Ò¹¿Ñ§¡ìªÑ¹ wireless LAN (ÊÑ−−ҳ俹Õé¨ÐäÁè·Ó§Ò¹ÊÓËÃѺÃØè¹·ÕèäÁèÁÕ¡ÒõԴµÑé§
wireless LAN)
ẵàµÍÃÕè
áÊ´§à»ç¹ÊÕ¹éÓà§Ô¹ – àÁ×èÍẵàµÍÃÕèÁÕ»ÃШØàµçÁ ËÃ×ÍàÁ×èÍäÁèä´éµÔ´µÑé§áºµàµÍÃÕèã¹à¤Ã×èͧ
à»ç¹ÊÕÍӾѹ - ¢³Ð·Õè¡ÓÅѧªÒÃ쨻ÃШØãËéẵàµÍÃÕè
¡ÃоÃÔº - àÁ×èÍÁÕ¡ÒõԴµÑé§áºµàµÍÃÕèäÁè¶Ù¡µéͧ
à¾ÒàÇÍÃì
ä¿áÊ´§Ê¶Ò¹Ð¨ÐµÔ´ – ¢³Ð·Õèà»Ô´à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì
¡ÃоÃÔº – àÁ×èͤÍÁ¾ÔÇàµÍÃìÍÂÙèã¹âËÁ´Êáµ¹´ìºÒÂ
¡ÒûÃѺ¤ÇÒÁÊÇèÒ§¢Í§¨Í LCD
ÃдѺ¤ÇÒÁÊÇèÒ§¢Í§¨Í LCD ÁÕ·Ñé§ËÁ´ 8 ÃдѺ´éÇ¡ѹ (1: ÊÇèÒ§¹éÍ·ÕèÊØ´ ~ 8: ÊÇèÒ§·ÕèÊØ´)
¡ÒûÃѺâ´Âãªéá»é¹¾ÔÁ¾ì
¡´»ØèÁ <Fn>+< > ËÃ×Í <Fn>-< > ¨Ò¡á»é¹¾ÔÁ¾ìà¾×èÍ»ÃѺÃдѺ¤ÇÒÁÊÇèÒ§¢Í§¨Í LCD àÁ×èÍÁÕ¡ÒûÃѺÃдѺ¤ÇÒÁÊÇèÒ§
¨Ð»ÃÒ¡¯¤èÒ¤ÇÒÁÊÇèÒ§»Ñ¨¨ØºÑ¹¢Í§¨Í LCD ·ÕèÁØÁº¹«éÒ¢ͧ¨Í LCD ÍÂÙè¤ÃÙè˹Öè§
àÁ×èÍã´¡çµÒÁ·Õè¤Ø³à»Ô´à¤Ã×èͧËÃ×Íà»ÅÕè¹áËÅ觨èÒÂä¿ ÃдѺ¤ÇÒÁÊÇèÒ§¢Í§¨Í¨Ðà»ÅÕè¹仵ÒÁ¡ÒõÑ駤èҴѧ¹Õé
• àÁ×èÍãªé¡ÃÐáÊä¿ AC: ¤ÇÒÁÊÇèÒ§ÃдѺ 8
• àÁ×Íè ãªé俨ҡẵàµÍÃÕè: ¤ÇÒÁÊÇèÒ§ÃдѺ 1
¡ÒûÃѺ¤ÇÒÁÊÇèÒ§â´Âãªé Battery Manager
¤Ø³ÊÒÁÒö»ÃѺ¤ÇÒÁÊÇèÒ§¢Í§¨ÍÀÒ¾â´Âãªé Battery Manager (¹. 110)
¡ÒÃÃÑ¡ÉÒ¤èÒ¤ÇÒÁÊÇèÒ§¢Í§¨Í LCD ËÅѧ¨Ò¡»Ô´à¤Ã×èͧáÅÐà»Ô´à¤Ã×èͧ
1. à»Ô´à¤Ã×èͧ àÁ×èÍ»ÃÒ¡¯âÅâ¡é Samsung ¢Öé¹ ãËé¡´»ØèÁ <F2> à¾×èÍà¢éÒÊÙè¡ÒõÑ駤èҢͧà¤Ã×èͧ
2. ã¹àÁ¹Ù Boot ãËéà»ÅÕ蹤èÒµÑÇàÅ×Í¡ Brightness Control Mode à»ç¹ User Control
3. ºÑ¹·Ö¡¡ÒõÑ駤èÒáÅéÇÍÍ¡¨Ò¡â»Ãá¡ÃÁ¡ÒõÑ駤èҢͧà¤Ã×èͧ
- àÁ×èÍãªé Battery Manager ¨ÐÁÕ¡ÒÃà¡çº¤ÇÒÁÊÇèҧ˹éÒ¨Í੾ÒзÕè¡Ó˹´äÇéã¹âËÁ´ 'Customized' à·èÒ¹Ñé¹
¡ÒûÃÐËÂÑ´»ÃШØä¿¿éҢͧẵàµÍÃÕè
àÁ×èͤÍÁ¾ÔÇàµÍÃìãªé¾Åѧ§Ò¹¨Ò¡áºµàµÍÃÕè ¡ÒûÃѺŴÃдѺ¤ÇÒÁÊÇèÒ§¢Í§¨Í LCD
ÊÒÁÒöªèÇÂÅ´¡ÒÃãªé¾Åѧ§Ò¹¨Ò¡áºµàµÍÃÕèä´é
¡ÒÃà¡Ô´¨Ø´ºÍ´ã¹¨Í LCD
¢éͨӡѴ¢Í§à·¤â¹âÅÂÕ¡ÒüÅÔµ LCD ÍÒ¨ÁÕ¡ÒÃà¡Ô´¾Ô¡à«ÅªÓÃØ´ä´éÊÙ§ÊØ´äÁèà¡Ô¹ 10 ¾Ô¡à«Å
«Ö觨ÐÂѧäÁèÁռšÃзºµèÍ»ÃÐÊÔ·¸ÔÀÒ¾¢Í§Ãкº
¤ÍÁ¾ÔÇàµÍÃì¹Õé¨Ö§ÍÒ¨ÁÕ¡ÒÃà¡Ô´¾Ô¡à«ÅªÓÃØ´ä´éàªè¹à´ÕÂǡѺ¼ÅÔµÀѹ±ì¢Í§¼Ùé¼ÅÔµÃÒÂÍ×è¹æ
¤Óá¹Ð¹Ó㹡ÒôÙáÅà¤Ã×èͧ
㹡Ò÷ӤÇÒÁÊÐÍÒ´¨Í LCD ãËéãªé੾ÒÐÊÒ÷ӤÇÒÁÊÐÍÒ´¤ÍÁ¾ÔÇàµÍÃì·ÕèÃкØáÅмéÒ¹ØèÁ â´Â¤èÍÂæ
àªç´ä»ã¹·ÔÈ·Ò§à´ÕÂǡѹ
àÃÔèÁµé¹ 15
¡ÒûÃѺ¤ÇÒÁ´Ñ§àÊÕ§
¡ÒûÃѺâ´Âãªéá»é¹¾ÔÁ¾ì
¡´»ØèÁ <Fn>+<
> ËÃ×Í <Fn>+<
> ¨Ò¡á»é¹¾ÔÁ¾ì
¡ÒûÃѺâ´Âãªéâ»Ãá¡ÃÁ»ÃѺ¤ÇÒÁ´Ñ§àÊÕ§
¤ÅÔ¡äͤ͹ ÃдѺàÊÕ§ (
) ·Õè·ÒÊ¡ìºÒÃì áÅéÇ»ÃѺᶺàÅ×è͹ä»ÂѧÃдѺ·Õèµéͧ¡ÒÃ
ÊÓËÃѺµÑÇàÅ×Í¡¡ÒûÃѺÃдѺàÊÕ§Ẻ«Ñº«é͹ ãËé´ÑºàºÔŤÅÔ¡·Õèäͤ͹ ÃдѺàÊÕ§ (
àÊÕ§¨Ò¡â»Ãá¡ÃÁ¤Çº¤ØÁ
¢³Ð·Õèà»Ô´à¤Ã×èͧ ÍÒ¨à¡Ô´àÊÕ§¨Ò¡¡Òúٵä´é
16 ¤ÙèÁ×ͼÙéãªé
) áÅéÇ»ÃѺÃдѺ¤ÇÒÁ´Ñ§
ÃÙé¨Ñ¡¡Ñº Windows
à¢éÒ㨡Ò÷ӧҹ¡Ñºà´Ê¡ì·Í»
à´Ê¡ì·Í»¤×;×é¹·Õè·Ó§Ò¹¢Í§à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì â´Â»ÃСͺ´éǾ×é¹·Õè·Ó§Ò¹¢¹Ò´ãË−èáÅзÒÊ¡ìºÒÃì·ÕèÊèǹÅèÒ§
äͤ͹ªç͵¤Ñ·
àÁ¹Ù Start
Recycle Bin
ᶺÀÒÉÒ
»ØèÁ Start
·ÒÊ¡ìºÒÃì
«ÔÊàµçÁà·ÃÂìáÅйÒÌÔ¡Ò
»ØèÁ Start
à»Ô´àÁ¹Ù Start
·ÒÊ¡ìºÒÃì
áÊ´§â»Ãá¡ÃÁµèÒ§æ ·Õè¡ÓÅѧãªé§Ò¹ÍÂÙèã¹¢³Ð¹Ñé¹ áÅÐÊÒÁÒö¹Óäͤ͹·ÕèãªéºèÍÂ
ÇÒ§äÇéä´éÍÕ¡´éÇÂ
Recycle Bin
ä¿ÅìáÅÐâ¿Åà´ÍÃìµèÒ§æ ·Õè¶Ù¡Åº¨Ð¶Ù¡Êè§ÁÒ·Õè¹Õè
ᶺÀÒÉÒ
ÊÅѺÀÒÉÒÊÓËÃѺ¡ÒÃÍÔ¹¾Øµ
ÃÙé¨Ñ¡¡Ñº Windows 17
à¢éÒ㨡Ò÷ӧҹ¢Í§àÁ¹Ù Start
àÁ¹Ù Start »ÃСͺ´éÇ·ءæ ÍÂèÒ§·Õè¨Óà»ç¹ã¹¡ÒÃàÃÔèÁãªé§Ò¹ Windows ¨Ò¡àÁ¹Ù Start ¤Ø³ÊÒÁÒöÃѹâ»Ãá¡ÃÁ à»Ô´ä¿Åì ¡Ó˹´
¼Ùéãªé¢Í§Ãкºâ´Âãªé Control Panel ¢ÍÃѺ¤ÇÒÁªèÇÂàËÅ×Íâ´Â¡ÒäÅÔ¡·Õè ÇÔ¸ÕãªéáÅСÒÃʹѺʹع ¤é¹ËÒÃÒ¡Ò÷Õèµéͧ¡Òèҡ
¤ÍÁ¾ÔÇàµÍÃìËÃ×ÍÍÔ¹àµÍÃìà¹çµä´éâ´Â¡ÒäÅÔ¡·Õè ¤é¹ËÒ
My Computer
Control Panel
â»Ãá¡ÃÁ·ÕèãªéºèÍÂ
ÇÔ¸ÕãªéáÅСÒÃʹѺʹع
â»Ãá¡ÃÁ·Ñé§ËÁ´
»ØèÁ Start
18 ¤ÙèÁ×ͼÙéãªé
My Computer
áÊ´§¢éÍÁÙŢͧÎÒÃì´´ÔÊ¡ì, ä´Ã¿ì«Õ´ÕÃÍÁ,ä´Ã¿ìà¹çµàÇÔÃì¡áÅпÅçÍ»»Õé´ÔÊ¡ì áÅÐÊÒÁÒöãªé
à¾×èͤé¹ËÒáÅÐà»Ô´ä¿ÅìËÃ×Íâ¿Åà´ÍÃìµèÒ§æ ä´éÍÕ¡´éÇÂ
Control Panel
ªèÇÂãËé¼ÙéãªéÊÒÁÒö¡Ó˹´¤èÒµèÒ§æ ãËé¡Ñºà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃìä´é
ÇÔ¸ÕãªéáÅÐ
¡ÒÃʹѺʹع
ÊÓËÃѺàÃÕº¡ãªéÇÔ¸ÕãªéÍ͹äÅ¹ì ´Ù¢éÍÁÙÅà¡ÕèÂǡѺÇÔ¹â´ÇÊìáÅСÒÃá¡é䢻Ñ−ËÒ
¤é¹ËÒ
ªèÇÂãËé¼ÙéãªéÊÒÁÒö¤é¹ËÒ¢éÍÁÙÅã¹ä¿ÅìµèÒ§æ ËÃ×ͨҡÍÔ¹àµÍÃìà¹çµä´é
Run
Ãѹâ»Ãá¡ÃÁµèÒ§æ ËÃ×ÍàÍ¡ÊÒõèÒ§æ
à¢éÒ㨡Ò÷ӧҹ¢Í§ÇÔ¹â´Çì
ÇÔ¹â´Çì¤×Íͧ¤ì»ÃСͺ¾×鹰ҹ㹡Ò÷ӧҹ¡Ñºà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì ÇÔ¹â´Çì My Computer à»ç¹ÇÔ¹â´ÇìÊÓËÃѺáÊ´§¢éÍÁÙÅ ÎÒÃì´´ÔÊ¡ì
¨Ð¶Ù¡ãªéà»ç¹µÑÇÍÂèÒ§à¾×èÍáÊ´§Í§¤ì»ÃСͺµèÒ§æ ¢Í§ÇÔ¹â´Çì
¤ÅÔ¡ Start > My Computer
äͤ͹â¿Åà´ÍÃì
äµàµÔźÒÃì
àÁ¹ÙºÒÃì
»ØèÁ»Ô´
»ØèÁ¢ÂÒÂ
»ØèÁÂèÍ
ÇÔ¹â´Çì Quick
Task
â¿Åà´ÍÃì
ä¿Åì
´ÑºàºÔŤÅÔ¡àÍ¡ÊÒÃ
·ÕèÁÕ¡ÒÃáªÃìËÃ×Í´ÔÊ¡ì
µèÒ§æ
¤Ø³¨ÐàËç¹ä¿ÅìáÅÐ
â¿Åà´ÍÃìµèÒ§æ
´ÑºàºÔŤÅÔ¡·ÕèÎÒÃì´´ÔÊ¡ì (ä´Ã¿ìã¹à¤Ã×èͧ) à¾×èÍ´Ùâ¿Åà´ÍÃìáÅÐä¿ÅìµèÒ§æ ÀÒÂã¹â¿Åà´ÍÃì¹Ñé¹æ ËÒ¡äÁèÁÕ¡ÒÃáÊ´§
¢éÍÁÙÅÀÒÂã¹â¿Åà´ÍÃì ãËé¤ÅÔ¡ Show the contents of this folder
ä´Ã¿ì¤×ÍÍÐäÃ?
ÍØ»¡Ã³ì¨Ñ´à¡çº¢éÍÁÙÅ·ÕèÁÕ¡Òúѹ·Ö¡ä¿ÅìáÅÐâ¿Åà´ÍÃìµèÒ§æ àÍÒäÇé áÅÐÊÒÁÒöàÃÕ¡ÍèÒ¹¢éÍÁÙŨҡÍØ»¡Ã³ì´Ñ§¡ÅèÒÇä´é
â¿Åà´ÍÃì¤×ÍÍÐäÃ?
â¿Åà´ÍÃì¶Ù¡ãªéà¾×èͨѴ¡ÅØèÁáÅШѴ¡ÒÃä¿ÅìÍÂèÒ§à»ç¹Ãкº áÅÐÍÒ¨ÁÕä¿ÅìµèÒ§æ ã¹â¿Åà´ÍÃìÂèÍÂä´é´éÇ «Ö觨Ð
àËÁ×͹¡ÑºªÑé¹Çҧ˹ѧÊ×Í
ä¿Åì¤×ÍÍÐäÃ?
ä¿Åì¤×ÍàÍ¡ÊÒÃËÃ×ͼŨҡ¡Ò÷ӧҹ¢Í§â»Ãá¡ÃÁµèÒ§æ â´ÂàÃÕ¡ÍÕ¡ÍÂèÒ§ÇèÒ ¢éÍÁÙÅ
¡ÒôÙâ¤Ã§ÊÃéÒ§·Ñé§ËÁ´¢Í§ä´Ã¿ì
¤ÅÔ¡äͤ͹â¿Åà´ÍÃìã¹·ÒÊ¡ìºÒÃìà¾×èÍ´Ùâ¤Ã§ÊÃéÒ§·Ñé§ËÁ´ ¤ÅÔ¡ÍÕ¡¤ÃÑé§à¾×èÍ¡ÅѺä»ÂѧÇÔ¹â´Çì Quick Task
ÃÙé¨Ñ¡¡Ñº Windows 19
ÈÙ¹ÂìÇÔ¸ÕãªéáÅСÒÃʹѺʹع
ÈÙ¹ÂìÇÔ¸ÕãªéáÅСÒÃʹѺʹع (Help and Support Center) ÊÒÁÒöãªéÍéÒ§ÍÔ§áÅд٢éÍÁÙÅà¾×èÍ¡ÒÃá¡é䢻Ñ−ËÒ
à¡ÕèÂǡѺ¡ÒÃãªé¤ÍÁ¾ÔÇàµÍÃìä´é
¤ÅÔ¡ Start > Help and Support
Windows XP Tour
¤Ø³ÊÒÁÒö´Ù¢éÍÁÙÅà¡ÕèÂǡѺ¿Ñ§¡ìªÑ¹µèÒ§æ ·ÕèÁÕã¹ Windows XP ä´é
â´Â¤ÅÔ¡ Start > Tour Windows XP
ËÃ×ͤÅÔ¡ Start > All Programs > Accessories > Tour Windows XP
¤ÅÔ¡·ÕèáµèÅÐËÑÇ¢éÍà¾×èÍËÒ¢éÍÁÙÅà¡ÕèÂǡѺ¿Ñ§¡ìªÑ¹µèÒ§æ ¢Í§ Windows XP
20 ¤ÙèÁ×ͼÙéãªé
¡ÒÃãªé¤ÍÁ¾ÔÇàµÍÃì
¡ÒÃãªéä´Ã¿ì«Õ´ÕÃÍÁ
¤Ø³ÁÕä´Ã¿ìẺã´áººË¹Ö觵èÍ仹ÕéµÔ´µÑé§äÇéã¹à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³
ä´Ã¿ì DVD-ROM
ÊÒÁÒöÍèÒ¹á¼è¹ CD/DVD ä´é
ä´Ã¿ì CD-RW/DVD-ROM Combo
ÍèÒ¹á¼è¹ CD/DVD áÅÐà¢Õ¹á¼è¹ CD ä´é
ä´Ã¿ì DVD Super Multi Drive
ÍèÒ¹á¼è¹ CD/DVDs áÅÐà¢Õ¹¢éÍÁÙÅŧá¼è¹ CD/DVDs »ÃÐàÀ·¢Í§ DVD ·Õèãªéä´éÁÕ DVD ± R,
DVD ± RW áÅÐ DVD-RAM
ä´Ã¿ì«Õ´ÕÃÍÁà»ç¹ÍØ»¡Ã³ì³àÊÃÔÁ â»Ã´ÍèҹᤵµÒÅçÍ¡¼ÅÔµÀѳ±ì à¾×èÍ´ÙÃÒÂÅÐàÍÕ´à¡ÕèÂǡѺ¢éÍÁÙŨÓà¾ÒÐ
¡ÒÃãÊèá¼è¹«Õ´Õ
1. ¡´»ØèÁ¹Óá¼è¹ÍÍ¡·Õè´éÒ¹¢ÇҢͧä´Ã¿ì«Õ´ÕÃÍÁ
2. àÁ×èͶҴ«Õ´ÕÃÍÁàÅ×è͹ÍÍ¡ ãËéÇÒ§á¼è¹«Õ´Õŧ㹶Ҵâ´Â˧Ò´éÒ¹·ÕèÁÕ©ÅÒ¡¢Öé¹ áÅéÇ¡´á¼è¹«Õ´Õŧ¨¹¡ÃзÑè§ä´éÂÔ¹àÊÕ§¤ÅÔ¡
ªèͧ¹Óá¼è¹ÍÍ¡©Ø¡à©Ô¹
»ØèÁ¹Óá¼è¹ÍÍ¡
ÊÑ−−Ò³ LED
áÊ´§¡ÒÃãªé§Ò¹«Õ´Õ
3. ´Ñ¹¶Ò´à¢éÒ¨¹ä´éÂÔ¹àÊÕ§¤ÅÔ¡
¡ÒÃãªé¤ÍÁ¾ÔÇàµÍÃì 21
¡ÒùÓá¼è¹«Õ´ÕÍÍ¡
1. ËÂØ´¡ÒÃà¢éÒãªé§Ò¹ä´Ã¿ì«Õ´ÕÃÍÁà¾×èÍãËéá¹èã¨ÇèÒÊÑ−−Ò³ä¿ LED áÊ´§¡ÒÃà¢éÒãªé§Ò¹ä´Ã¿ì«Õ´ÕÃÍÁËÂØ´¡ÃоÃÔº
2. ¡´»ØèÁ¹Óá¼è¹ÍÍ¡·Õè´éÒ¹¢ÇҢͧä´Ã¿ì«Õ´ÕÃÍÁ
3. àÁ×èͶҴÇÒ§«Õ´ÕàÅ×è͹ÍÍ¡ ãËé¹Óá¼è¹«Õ´ÕÍÍ¡¨Ò¡¶Ò´¹Ñé¹
4. ´Ñ¹¶Ò´à¢éÒ¨¹ä´éÂÔ¹àÊÕ§¤ÅÔ¡
ËÒ¡¤Ø³¹Óá¼è¹«Õ´ÕÍÍ¡¢³Ð·ÕèÊÑ−−Ò³ä¿ LED Âѧ¤§µÔ´ÍÂÙè ´ÔÊ¡ìÍÒ¨àÊÕÂËÒÂáÅТéÍÁÙÅã¹á¼è¹
ÍÒ¨ä´éÃѺ¤ÇÒÁàÊÕÂËÒÂä´é
ªèͧ¹Óá¼è¹ÍÍ¡©Ø¡à©Ô¹
¡ÒùÓá¼è¹«Õ´ÕÍÍ¡¨Ò¡ä´Ã¿ì«Õ´ÕÃÍÁ·ÕèäÁè·Ó§Ò¹µÒÁ»¡µÔËÃ×ÍàÁ×èͻԴà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì ãËé¹Ó¤ÅԻ˹պ¡ÃдÒÉ
ÁÒ´Ñ´áÅéÇÊÍ´»ÅÒ¤ÅÔ»à¢éÒ·Õèªèͧ¹Óá¼è¹ÍÍ¡©Ø¡à©Ô¹ (ÍÂÙè¶Ñ´¨Ò¡»ØèÁ¹Óá¼è¹ÍÍ¡) áÅéÇ¡´¤éÒ§äÇ騹¶Ò´ãÊè«Õ´Õ
à»Ô´ÍÍ¡
¡Ò÷ӤÇÒÁÊÐÍÒ´á¼è¹«Õ´ÕËÃ×Í´ÕÇÕ´Õ
·Ó¤ÇÒÁÊÐÍÒ´´ÔÊ¡ìâ´Âãªé¼éÒÊÐÍÒ´â´Âàªç´¨Ò¡ÈÙ¹Âì¡ÅÒ§ÍÍ¡ä»´éÒ¹¹Í¡
¡ÒÃàÅè¹á¼è¹ DVD
¤Ø³µéͧµÔ´µÑ駫ͿµìáÇÃì DVD ·ÕèãËéÁÒã¹á¼è¹«Õ´Õà¾×èÍãËéÊÒÁÒöÃѺªÁ DVD ä´é
22 ¤ÙèÁ×ͼÙéãªé
¡ÒÃãªéâ»Ãá¡ÃÁ Windows Media Player
Window Media Player ªèÇÂãËé¤Ø³ÊÒÁÒöàÅè¹áÅШѴ¡ÒÃä¿ÅìàÊÕ§áÅÐÇÔ´ÕâÍä´é
¡ÒÃà»Ô´â»Ãá¡ÃÁ Windows Media Player ãËé¤ÅÔ¡ Start > All Programs > Accessories > Entertainment > Windows Media Player
¡ÒÃÃѹâ»Ãá¡ÃÁà»ç¹¤ÃÑéè§áá¨ÐáÊ´§Ë¹éҨ͡ÒõÑ駤èÒ ¡Ó˹´¡ÒõÑ駤èÒµÒÁ¤Óá¹Ð¹Óº¹·Õè»ÃÒ¡¯Ë¹éÒ¨Í
àÁ×è͵Ñ駤èÒàÊÃç¨áÅéÇ Ë¹éҨ͵èÍ仹Õé¨Ð»ÃÒ¡¯¢Öé¹
¤Ø³ÊÁºÑµÔ
à¾ÅÂìÅÔʵì
¾×é¹·Õè¤Çº¤ØÁ¡ÒÃàÅè¹
ËÁÒÂàËµØ ã¹¡Òô٢éÍÁÙÅÃÒÂÅÐàÍÕ´¡ÒÃãªé Windows Media Player:
àÃÕ¡ãªé Windows Media Player áÅФÅÔ¡¢ÇÒà˹×Í Function Taskbar áÅÐàÅ×Í¡ Help > Windows Media Player
Help
¡ÒÃàÅè¹á¼è¹ÇÔ´ÕâÍ«Õ´Õ
ËÒ¡äÁèÊÒÁÒöÃѹá¼è¹ÇÔ´ÕâÍ«Õ´Õä´éÍѵâ¹ÁÑµÔ ãËé·ÓµÒÁ¢Ñ鹵͹µèÍ仹Õé
1. ãÊèá¼è¹ÇÔ´ÕâÍ«Õ´Õŧã¹ä´Ã¿ì«Õ´ÕÃÍÁ
2. àÁ×èÍ»ÃÒ¡¯ÇÔ¹â´Çì¢Í§ä´Ã¿ì«Õ´ÕÃÍÁ¢Öé¹ ãËé´ÑºàºÔŤÅÔ¡·Õèâ¿Åà´ÍÃì MPEGAV
3. ´ÑºàºÔŤÅÔ¡·Õèä¿Åì .dat
4. àÁ×èÍ»ÃÒ¡¯ä´ÍÐÅçÍ¡ [Caution] ¢Öé¹ ãËé¤ÅÔ¡ Open With
5. àÅ×Í¡ "Select the program from a list" áÅéǤÅÔ¡ OK
6. àÅ×Í¡ Windows Media Player ¨Ò¡¹Ñ鹤ÅÔ¡ OK ÇÔ´ÕâͨÐàÃÔèÁàÅè¹
¡ÒÃãªé¤ÍÁ¾ÔÇàµÍÃì 23
¡Ãкǹ¡ÒâéÒ§µé¹ãªéä´é੾ÒСѺÇÔ´ÕâÍ«Õ´Õ·ÕèÁÕä¿Åì .dat à·èÒ¹Ñé¹ ¡ÒÃàÅè¹ÍÒ¨ÁÕ¤ÇÒÁᵡµèÒ§¡Ñ¹
仵ÒÁª¹Ô´¢Í§ÇÔ´ÕâÍ«Õ´Õ
¡ÒÃà¢Õ¹¢éÍÁÙÅÅ§ã¹«Õ´Õ (µÑÇàÅ×Í¡)
ËÒ¡¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³ÁÕä´Ãì¿ CD-RW ·Õè ¤Ø³¨ÐÊÒÁÒö¤Ñ´ÅÍ¡¢éÍÁÙÅä»Âѧá¼è¹«Õ´Õà»ÅèÒËÃ×ÍÊÃéÒ§á¼è¹ÍÍ´ÔâÍ«Õ´Õä´é
â´Ââ»Ãá¡ÃÁÍ×è¹æ ÊÓËÃѺãªé㹡ÒÃà¢Õ¹á¼è¹«Õ´ÕÁÕÁÒãËé㹫մÕÍ×è¹æ
¤Ø³¨ÐäÁèÊÒÁÒöà¢Õ¹¢éÍÁÙÅŧã¹á¼è¹«Õ´Õ·ÕèÁÕ¢éÍÁÙźѹ·Ö¡ÍÂÙèáÅéÇ
1. ãÊèá¼è¹«Õ´Õà»ÅèÒŧã¹ä´Ã¿ì«Õ´ÕÃÍÁ
2. ã¹ä´ÍÐÅçÍ¡ [CD Drive] ãËéàÅ×Í¡ Open Writable CD Folder áÅéǤÅÔ¡ OK ¨Ð»ÃÒ¡¯ÇÔ¹â´Çì¢Í§ä´Ã¿ì«Õ´ÕÃÍÁ¢Öé¹
3. ¤ÅÔ¡ Start > My Computer
4. ã¹ÇÔ¹â´Çì My Computer ãËéàÅ×Í¡ä¿ÅìáÅÐâ¿Åà´ÍÃì·Õèµéͧ¡ÒäѴÅÍ¡ áÅéÇÅÒ¡ä»ÇÒ§ã¹ÇÔ¹â´Çì¢Í§ä´Ã¿ì«Õ´ÕÃÍÁ
ÇÔ¹â´Çì My Computer
ÇÔ¹â´Çìä´Ã¿ì«Õ´ÕÃÍÁ
4.
ÅÒ¡áÅéÇÇÒ§â¿Åà´ÍÃìËÃ×Íä¿Åì·Õèµéͧ¡
5. ¤ÅÔ¡ Write these files to CD
24 ¤ÙèÁ×ͼÙéãªé
5. ¤ÅÔ¡ Write these files to CD ã¹ÇÔ¹â´Çì¢Í§ä´Ã¿ì«Õ´ÕÃÍÁ
6. àÁ×èÍ»ÃÒ¡¯ CD Writing Wizard ¢Öé¹ ãËé»é͹ª×èÍá¼è¹«Õ´Õ áÅéǤÅÔ¡ Next ¢éÍÁÙŨÐàÃÔèÁ¶Ù¡¤Ñ´ÅÍ¡
7. àÁ×èÍ¡ÒäѴÅÍ¡àÊÃç¨ÊÁºÙÃ³ì ¨Ð»ÃÒ¡¯¢éͤÇÒÁá¨é§ãËé·ÃÒº áÅÐÇÔ¹â´Çì¢Í§ä´Ã¿ì«Õ´Õ¨Ð¶Ù¡à»Ô´¢Öé¹â´ÂÍѵâ¹ÁѵÔ
ÊÓËÃѺ¢éÍÁÙÅà¾ÔèÁàµÔÁà¡ÕèÂǡѺ¡ÒÃà¢Õ¹á¼è¹«Õ´Õ
¤ÅÔ¡ Start > Help and Support ¾ÔÁ¾ì "CD copy" ŧ㹿ÔÅ´ì¤é¹ËÒ áÅéǤÅÔ¡äͤ͹ Search (
)
㹡ÒÃàºÔÃ칫մÕà¾Å§:
àÃÕ¡ãªé Windows Media Player áÅФÅÔ¡¢ÇÒà˹×Í Function Taskbar áÅÐàÅ×Í¡ Help > Windows Media Player
Help
àÅ×Í¡ Using the Player > Using CDs, DVDs and VCDs > Using CDs > Burning your own CDs > To burn
your own CD à¾×èÍ´Ù¢éÍÁÙÅâ´ÂÅÐàÍÕ´
¡ÒÃãªé¤ÍÁ¾ÔÇàµÍÃì 25
à¾ÅÔ¹¡ÑºâÎÁà¸ÕÂàµÍÃì (S/PDIF Port)
¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³Ê¹ÑºÊ¹Ø¹àÍÒµì¾Øµáºº 5.1 ᪹à¹Å «Öè§à»ç¹¿Ñ§¡ìªÑ¹¾×é¹°Ò¹¢Í§ÃкºâÎÁà¸ÕÂàµÍÃì áÅÐä´Ã¿ì DVD
â´ÂãËé¤Ø³ÀÒ¾àÊÕ§Ẻ 3D áÅÐ˹éҨͷÕè¤ÁªÑ´
ÍÐää×ÍÃкºâÎÁà¸ÕÂàµÍÃì?
ÃкºâÎÁà¸ÕÂàµÍÃì ÁÑ¡¨Ð»ÃСͺ´éÇÂâ·Ã·Ñȹì, DVD, ÅÓ⾧Ẻ 5.1 ᪹à¹ÅáÅÐáÍÁ»ì´Ô¨ÔµÍÅáÅÐ˹éÒ¨Í
¤ÇÒÁÅÐàÍÕ´ÊÙ§ (MPEG2) áÅÐÃкºàÊÕ§à«ÍÃìÃÒǹ´ìẺ 3D (Dolby 5.1 ËÃ×Í DTS) ´éÇÂÃкºâÎÁà¸ÕÂàµÍÃì
¤Ø³ÊÒÁÒöà¾ÅÔ¹¡ÑºÀÒ¾·Õè¤ÁªÑ´áÅÐàÊÕ§¡ÃÐËÖèÁ㹺éÒ¹ä´éàËÁ×͹¡Ñº¡ÒÃÃѺªÁã¹âçÀҾ¹µÃì
â´ÂµéͧÁÕÍØ»¡Ã³ìµèÒ§æ µèÍ仹Õéà¾×èÍãËéÊÒÁÒöÃѺªÁÃкºâÎÁà¸ÕÂàµÍÃìä´é
ÅÓ⾧Ãкº 5.1 ᪹à¹Å (áÍÁ»ì»ÅÔ¿ÒÂàÍÍÃì, ÅÓ⾧,ÊÒÂà¤àºÔÅàª×èÍÁµèÍ)
á¡«×éÍä´é
ä´Ã¿ì DVD áÅÐâ»Ãá¡ÃÁÊÓËÃѺàÅè¹ DVD ã¹à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì
ÍØ»¡Ã³ìàÊÃÔÁ
á¼è¹ DVD ·ÕèʹѺʹعÃкºàÊÕ§Ẻ 5.1 ᪹à¹Å
á¡«×éÍä´é
¡ÒÃãªéÃкºâÎÁà¸ÕÂàµÍÃì ãËé·ÓµÒÁ¢Ñ鹵͹µèÒ§æ ´Ñ§µèÍ仹Õé:
• ¢Ñé¹·Õè 1. àª×èÍÁµèÍÃкºÅÓ⾧Ẻ 5.1 ᪹à¹Åà¢éҡѺà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³
• ¢Ñ¹é ·Õè 2. ¡Ó˹´¤èҤ͹¿Ô¡àÍÒµì¾ØµàÊÕ§´Ô¨ÔµÍÅ·Õèà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì
• ¢Ñ¹é ·Õè 3. à»Ô´àÍÒµì¾Øµ S/PDIF ã¹â»Ãá¡ÃÁ DVD
26 ¤ÙèÁ×ͼÙéãªé
¢Ñé¹·Õè 1. àª×èÍÁµèÍÃкºÅÓ⾧Ẻ 5.1 ᪹à¹Åà¢éҡѺà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³
1. µèÍá¨ç¤ S/PDIF ¢Í§ÃкºáÅÐáÍÁ»ì»ÅÔ¿ÒÂàÍÍÃìẺ 5.1 ᪹à¹Å
2. µèÍÅÓ⾧à¢éҡѺáÍÁ»ì»ÅÔ¿ÒÂàÍÍÃì (·ÓµÒÁ¤Óá¹Ð¹Ó㹤ÙèÁ×ͧ͢ÅÓ⾧
3. ¡ÒÃàÃÕ¡´Ù¼èÒ¹â·Ã·Ñȹì ãËéàª×èÍÁµèÍâ·Ã·ÑȹìáÅéÇà»ÅÕè¹ÍØ»¡Ã³ìáÊ´§¼Å»Ñ¨¨ØºÑ¹ãËéà»ç¹â·Ã·Ñȹìã¹ Display Properties
”¡ÒÃàª×èÍÁµèÍâ·Ã·ÑÈ¹ì” (¹. 98)
â·Ã·Ñȹì
«ÑºÇÙ¿à¿ÍÃì
´Ô¨ÔµÍÅáÍÁ»ì»ÅÔ¿ÒÂàÍÍÃì
ÅÓ⾧˹éÒ¢ÇÒ
ÅÓ⾧˹éÒ«éÒÂ
¤ÍÁ¾ÔÇàµÍÃì
ÅÓ⾧¡ÅÒ§
ÅÓ⾧à«ÍÃìÃÒǹ´ì«éÒÂ
ÅÓ⾧à«ÍÃìÃÒǹ´ì¢ÇÒ
¢Ñé¹·Õè 2. ¡Ó˹´¤èҤ͹¿Ô¡àÍÒµì¾ØµàÊÕ§´Ô¨ÔµÍÅ·Õèà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì
1. ¤ÅÔ¡ Start > Control Panel > Sounds, Speech and Audio Devices > Sounds and Audio Devices
2. 㹿ÔÅ´ì Device volume ã¹á·çºVolume ãËé¤ÅÔ¡ Advanced
3. ã¹ä´ÍÐÅçÍ¡ [Volume Control] ¤ÅÔ¡ Option > Advanced Controls ¨Ò¡¹Ñé¹»ØèÁAdvanced ¨Ð»ÃÒ¡¯¢Öé¹·Õè´éÒ¹ÅèÒ§
¢Í§ä´ÍÐÅçÍ¡
4. ¤ÅÔ¡ Advanced àÅ×Í¡ "1 PCM SPDIF" ¨Ò¡¹Ñ鹤ÅÔ¡ Close
¡ÒÃãªé¤ÍÁ¾ÔÇàµÍÃì 27
¢Ñé¹·Õè 3. à»Ô´àÍÒµì¾Øµ S/PDIF ã¹â»Ãá¡ÃÁ DVD
¡ÒÃãªéÅÓ⾧Ẻ 5.1 ᪹à¹Å ¤Ø³µéͧµÔ´µÑé§â»Ãá¡ÃÁ Power DVD ¨Ò¡á¼è¹«Õ´ÕµÔ´µÑé§â»Ãá¡ÃÁàÅè¹ DVD ·ÕèãËéÁÒ
¾ÃéÍÁ¡Ñºà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³ ¨Ò¡¹Ñé¹ãËéà»ÅÕ蹡ÒõÑ駤èҴѧ¹Õé
1. Ãѹâ»Ãá¡ÃÁ Power DVD áÅéǤÅÔ¡äͤ͹ Settings (
)
2. ã¹á·çº Audio ãËé¡Ó˹´¤èÒ Audio Output à»ç¹ "Use SPDIF" áÅéǤÅÔ¡ OK
¤Ø³ÊÒÁÒöà¾ÅÔ´à¾ÅÔ¹¡ÑºÃкºâÎÁà¸ÕÂàµÍÃìâ´ÂÃѺªÁ DVD ä´éáÅéÇ
¡ÒäǺ¤ØÁÃдѺ¤ÇÒÁ´Ñ§¢Í§àÊÕ§ã¹ÅÓ⾧Ẻ 5.1 ᪹à¹Å ãËéãªé»ØèÁ¤Çº¤ØÁ·Õè´Ô¨ÔµÍÅáÍÁ»ì (´Ù¤ÙèÁ×ͧ͢ÅÓ⾧)
28 ¤ÙèÁ×ͼÙéãªé
¡ÒÃãªéÊÅç͵àÁâÁÃÕè¡ÒÃì´
¤Ø³ÊÒÁÒöãªéÊÅç͵¢Í§¡ÒÃì´Ë¹èǤÇÒÁ¨Óà¾×èÍÍèÒ¹¡ÒÃì´Ë¹èǤÇÒÁ¨Ó (ÃͧÃѺ Memory Stick, Memory Stick Pro, SD Card,
MMC áÅÐ XD Card) ¤Ø³ÊÒÁÒöãªé¡ÒÃì´Ë¹èǤÇÒÁ¨Óà¾×èÍà»ç¹´ÔÊ¡ì·Õè¶Í´à¢éÒÍÍ¡ä´é áÅÐãªé㹡ÒöèÒÂâ͹¢éÍÁÙÅ
ÃÐËÇèÒ§¤ÍÁ¾ÔÇàµÍÃìáÅÐÍØ»¡Ã³ì´Ô¨ÔµÑÅ àªè¹ ¡Åéͧ´Ô¨ÔµÑÅ
Memory Stick
Memory Stick Pro
SD Card
MMC
XD Card
¢éͨӡѴ¢Í§¡ÒÃãªé¡ÒÃì´Ë¹èǤÇÒÁ¨Ó
¤Ø³ÊÒÁÒöãªé¡ÒÃì´Ë¹èǤÇÒÁ¨Óà¾×èÍà¡çº¢éÍÁÙÅà·èÒ¹Ñé¹ ÍØ»¡Ã³ì¹ÕéäÁèÃͧÃѺ¿Ñ§¡ìªÑ¹¡ÒäØéÁ¤ÃͧÅÔ¢ÊÔ·¸Ôì
¡ÒÃãÊèáÅÐãªéàÁâÁÃÕè¡ÒÃì´
¡è͹ãªéÊÅç͵àÁâÁÃÕè¡ÒÃì´ ãËé»Å´ÍØ»¡Ã³ì»éͧ¡Ñ¹ÊÅç͵ÍÍ¡¡è͹
¡´Êèǹ»ÅÒ¢ͧÍØ»¡Ã³ì»éͧ¡Ñ¹ÊÅç͵àºÒæ à¾×è͹ÓÍÍ¡
ÊÍ´àÁâÁÃÕè¡ÒÃì´â´Â˧Ò¢Öé¹
¡ÒÃãÊè¼Ô´´éÒ¹ÍÒ¨·ÓãËéàÁâÁÃÕè¡ÒÃì´áÅФÍÁ¾ÔÇàµÍÃìä´éÃѺ¤ÇÒÁàÊÕÂËÒÂ
¡ÒÃãªé¤ÍÁ¾ÔÇàµÍÃì 29
1. ãÊèàÁâÁÃÕè¡ÒÃì´Å§ã¹ÊÅç͵àÁâÁÃÕè¡ÒÃì´
2. ¤ÅÔ¡ Start > My Computer ¨Ð»ÃÒ¡¯àÁâÁÃÕè¡ÒÃì´·ÕèÊÍ´à¢éÒ仢Öé¹
Memory Stick
3. ¤Ø³ÊÒÁÒöà¢Õ¹¢éÍÁÙÅŧã¹àÁâÁÃÕè¡ÒÃì´ä´é 㹡óշÕèàÁâÁÃÕè¡ÒÃì´¹Ñé¹ÂѧäÁèä´éÃѺ¡ÒÿÍÃìáÁµ ãËé·Ó¡ÒÿÍÃìáÁµ
¡è͹¹ÓÁÒãªé§Ò¹
à¹×èͧ¨Ò¡àÁâÁÃÕè¡ÒÃì´ÍÒ¨ÁÕ¡ÒÃËÅØ´Ãèǧä´é§èÒ¢³Ð·Õèà¤Å×è͹ÂéÒÂà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì ´Ñ§¹Ñé¹ãËéà¡çºàÁâÁÃÕè¡ÒÃì´
á¡äÇéµèÒ§ËÒ¡
¡ÒùÓá¼è¹àÁâÁÃÕè¡ÒÃì´ÍÍ¡
1. ¡´»ÅÒ¢ͧàÁâÁÃÕè¡ÒÃì´àºÒæ à¾×èÍãËé´Õ´µÑÇÍÍ¡ÁÒ
2. ¹Óá¼è¹àÁâÁÃÕè¡ÒÃì´ÍÍ¡
30 ¤ÙèÁ×ͼÙéãªé
¡ÒÿÍÃìáÁµá¼è¹àÁâÁÃÕè¡ÒÃì´
¤Ø³ÊÒÁÒöãªéàÁâÁÃÕè¡ÒÃì´ä´éËÅѧ¨Ò¡·Ó¡ÒÿÍÃìáÁµáÅéÇà·èÒ¹Ñé¹ â´Â¢Ñ鹵͹㹡ÒÿÍÃìáÁµàÁâÁÃÕè¡ÒÃì´Áմѧ¹Õé
à¹×èͧ¨Ò¡¡ÒÿÍÃìáÁµ¨Ðź¢éÍÁÙÅ·Ñé§ËÁ´ã¹àÁâÁÃÕè¡ÒÃì´ ¤Ø³¨Ö§¤ÇõÃǨÊͺãËéá¹èã¨àÊÕ¡è͹ÇèÒäÁèÁÕ¢éÍÁÙÅ
ÊÓ¤Ñ−ã´æ ËŧàËÅ×ÍÍÂÙè㹡ÒÃì´¡è͹·Õè¨Ð·Ó¡ÒÿÍÃìáÁµ
¡Òûéͧ¡Ñ¹¢éÍÁÙÅã¹àÁâÁÃÕè¡ÒÃì´
ãËéàÅ×è͹ᶺ»éͧ¡Ñ¹¢éÍÁÙŢͧ Memory Stick ËÃ×Í SD memory card ä»ÂѧµÓá˹è§Åçͤ
1. ¤ÅÔ¡ Start > My Computer
2. ¡´»ØèÁ¢ÇҢͧ·Ñªá¾´àÁ×èÍàÅ×Í¡·Õèä´Ã¿ìàÁâÁÃÕè¡ÒÃì´ áÅéÇàÅ×Í¡ Format ¨Ò¡àÁ¹Ù»çÍ»ÍÑ»
3. ¤ÅÔ¡ Start à¾×èÍàÃÔèÁ·Ó¡ÒÿÍÃìáÁµ
¡ÒÃãªéàÁâÁÃÕè¡ÒÃì´·Ñé§ã¹¤ÍÁ¾ÔÇàµÍÃìáÅÐÍØ»¡Ã³ì´Ô¨ÔµÍÅÍ×è¹æ àªè¹ ¡Åéͧ´Ô¨ÔµÍÅ á¹Ð¹ÓãËé¿ÍÃìáÁµ
àÁâÁÃÕè¡ÒÃì´¹Ñé¹æ ã¹ÍØ»¡Ã³ì´Ô¨ÔµÍÅâ´ÂµÃ§ ËÒ¡¤Ø³¿ÍÃìáÁµàÁâÁÃÕè¡ÒÃì´ã¹à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì ¤Ø³ÍÒ¨µéͧ
¿ÍÃìáÁµ¡ÒÃì´ÍÕ¡¤ÃÑé§ã¹ÍØ»¡Ã³ì´Ô¨ÔµÍÅà¾×èÍãËéÊÒÁÒöãªé¡ÒÃì´¹Ñé¹ä´é¡ÑºÍØ»¡Ã³ì´Ñ§¡ÅèÒÇ
¡ÒÃãªé¤ÍÁ¾ÔÇàµÍÃì 31
¡ÒÃãªéÊÅç͵ PCMCIA
ÊÒÁÒöà¾ÔèÁ¿Ñ§¡ìªÑ¹µèÒ§æ ä´éâ´Â¡ÒÃãÊèá¼è¹ PCMCIA ŧã¹à¤Ã×èͧ à¤Ã×èͧ¹ÕéÊÒÁÒöãªé¡ÒÃì´ 16/32 ºÔµ, PCMCIA Ẻ type I ËÃ×Í
II ä´é
ÊÅç͵¡ÒÃì´ PCMCIA äÁèÊÒÁÒöÃͧÃѺ¡ÒÃì´ ZV ËÃ×Í PCMCIA III ä´é
¡ÒÃãÊè¡ÒÃì´ PCMCIA
¡è͹ãªéÊÅç͵ PCMCIA ãËé»Å´ÍØ»¡Ã³ì»éͧ¡Ñ¹ÊÅç͵ÍÍ¡¡è͹
´Ñ¹»ØèÁ»Å´¢Í§ÊÅç͵¡ÒÃì´ PCMCIA ˹Ö觤ÃÑé§à¾×èÍãËé»ØèÁ´Õ´µÑÇÍÍ¡ ¡´»ØèÁÍÕ¡¤ÃÑé§à¾×è͹ÓÍØ»¡Ã³ì»éͧ¡Ñ¹ÊÅç͵ÍÍ¡
1. ãÊè¡ÒÃì´ PCMCIA ŧã¹ÊÅç͵ PCMCIA ´éÒ¹¢éÒ§à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì
µÃǨ´ÙãËéá¹èã¨ÇèÒ¡ÒÃì´ PCMCIA ãÊèäÇéã¹ÊÅç͵ÍÂèÒ§¶Ù¡µéͧ à¹×èͧ¨Ò¡¡ÒÃãÊè¡ÒÃì´¼Ô´¨Ð·ÓãËéÊÅç͵¡ÒÃì´ PCMCIA
àÊÕÂËÒÂä´é
»ØèÁ¹Óá¼è¹ÍÍ¡
2. Windows ¨ÐµÔ´µÑé§ä´ÃàÇÍÃì·Õè¨Óà»ç¹µéͧãªéãËé¡ÒÃì´â´ÂÍѵâ¹ÁÑµÔ ËÒ¡äÁ辺ä´ÃàÇÍÃìã¹ Windows ¤Ø³µéͧµÔ´µÑé§ä´ÃàÇÍÃì
â´Âãªé´ÔÊ¡ì·Õèä´éÃѺÁҡѺ¡ÒÃì´¹Ñé¹æ
32 ¤ÙèÁ×ͼÙéãªé
¡ÒùӡÒÃì´ PCMCIA ÍÍ¡
1. ´ÑºàºÔŤÅÔ¡·Õèäͤ͹ Safely Removes Hardware (
) º¹·ÒÊ¡ìºÒÃì
2. ·Õèä´ÍÐÅçÍ¡ºçÍ¡«ì [Safely Remove Hardware] ãËéàÅ×Í¡¡ÒÃì´ PCMCIA ·ÕèàËÁÒÐÊÁáÅéǤÅÔ¡ Stop
3. àÁ×èÍ»ÃÒ¡¯ä´ÍÐÅçÍ¡ºçÍ¡«ì [Stop a Hardware Device] ¢Öé¹ ãËé¤ÅÔ¡ OK
4. ¤ÅÔ¡ Close à¾×èͻԴä´ÍÐÅçÍ¡ºçÍ¡«ì [Safely Remove Hardware]
5. ´Ñ¹»ØèÁ¹Ó¡ÒÃì´ÍÍ¡¢Í§ÊÅç͵¡ÒÃì´ PCMCIA ˹Ö觤ÃÑé§ »ØèÁ¨Ð´Õ´µÑÇÍÍ¡
6. ¡´»ØèÁÍÕ¡¤ÃÑé§à¾×è͹ӡÒÃì´ PCMCIA ÍÍ¡
¡ÒÃãªé¤ÍÁ¾ÔÇàµÍÃì 33
¡ÒÃãªé EasyBox
ãªéâ»Ãá¡ÃÁ EasyBox à¾×èÍãªé¿Ñ§¡ìªÑ¹µèÒ§æ ¢Í§ Windows ä´é§èÒÂáÅÐÊдǡ
àÃÕ¹ÃÙéà¡ÕèÂǡѺ EasyBox
´ÑºàºÔŤÅÔ¡·Õèäͤ͹ EasyBox ( ) º¹à´Ê¡ì·Í»
(ËÃ×ÍàÅ×Í¡ Start > All Programs > Samsung > EasyBox > EasyBox)
• System: ÁդسÊÁºÑµÔ¡ÒèѴ¡ÒÃÃкºãËéàÅ×Í¡ãªé ÃÇÁ·Ñ駡Òà defrag ´ÔÊ¡ì, ¡ÒÃźä¿Åì/â¿Åà´ÍÃì·ÕèäÁèä´éãªé, ¡ÒáÓ˹´
µÒÃÒ§¡ÒèѴ¡ÒÃà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃìáÅСÒáÙéÃкº
• BIOS: ã¹âËÁ´ windows ¤Ø³ÊÒÁÒöàÃÕ¡ãªé¤èÒµÑ駵鹢ͧ BIOS áÅÐà»ÅÕè¹ÅӴѺ¡Òúٵ
• Desktop: ¤Ø³ÊÁºÑµÔ¡ÒèѴ¡ÒÃà´Ê¡ì·Í»»ÃСͺ´éÇ¡ÒÃà»ÅÕè¹¢¹Ò´ÃٻẺÍÑ¡ÉÃ, ãªé¿Ñ§¡ìªÑ¹¡ÒâÂÒÂ, ¡ÒõÑ駤èÒàÁ¹Ù
Start áÅСÒèѴ¡ÒÃäͤ͹ quick launch º¹·ÒÊ¡ìºÒÃì
• Security: «Ö觤سÊÒÁÒö¡Ó˹´¤èҤ͹¿Ô¡¡ÒÃÃÑ¡ÉÒ¤ÇÒÁ»ÅÍ´ÀÑ·ÕèÁբͧ Windows XP SP2 áÅФسÊÒÁÒöà»ÅÕ蹤èÒ
¤Í¹¿Ô¡¢Í§¡ÒõÑ駤èÒä¿ÃìÇÍÅÅì, Windows automatic updates áÅСÒúÅçͤ»çÍ»ÍÑ»àÁ×èÍÁÕ¡ÒÃàª×èÍÁµè͡ѺÍÔ¹àµÍÃìà¹çµ
• ¤Óá¹Ð¹Óà¾ÔèÁàµÔÁ (Plus Tip): ¡ÅØèÁ¢Í§¿Ñ§¡ìªÑ¹à¾ÔèÁàµÔÁµèÒ§æ ¢Í§ Windows ·ÕèÁÕ»ÃÐ⪹ìÊÓËÃѺ¡ÒèѴ¡ÒÃÃкº
(ÁÕ¤Ó͸ԺÒªç͵¤Ñ·¢Í§ Windows ¡ÒáÓ˹´¤èҤ͹¿Ô¡¢Í§¡ÒÃáªÃìà¹çµàÇÔÃì¡áÅСÒÃà»Ô´áªÃìâ¿Åà´ÍÃì ÏÅÏ)
34 ¤ÙèÁ×ͼÙéãªé
¡ÒÃãªé EasyBox
¿Ñ§¡ìªÑ¹¡ÒèѴ¡ÒäÇÒÁ»ÅÍ´ÀѨÐÁÕ¡ÒÃãªé§Ò¹ã¹·Õè¹Õéà¾×èÍà»ç¹µÑÇÍÂèÒ§à¾×èÍáÊ´§¿Ñ§¡ìªÑ¹¢Í§ Easybox
¡ÒáÓ˹´¤èҤ͹¿Ô¡¢Í§ä¿ÃìÇÍÅÅì
Windows Firewall ·Ó˹éÒ·Õè»éͧ¡Ñ¹¼Ùéãªé·ÕèäÁèä´éÃѺ͹Ø−Òµ¨Ò¡¡ÒÃà¢éÒãªé§Ò¹Ãкº¢Í§¤Ø³¼èÒ¹·Ò§à¹çµàÇÔÃì¡ËÃ×ÍÍÔ¹àµÍÃìà¹çµ
1. ¤ÅÔ¡ Start > All Programs > Samsung > EasyBox > EasyBox
2. ¤ÅÔ¡Security ¨Ò¡àÁ¹ÙºÒÃì´éÒ¹º¹
3. àÅ×Í¡ Windows Firewall Settings ¨Ò¡àÁ¹Ù Security ·Ò§´éÒ¹«éÒÂ
4. àÅ×Í¡ÃдѺä¿ÃìÇÍÅÅì
5. ¤ÅÔ¡ Apply
¤ÅÔ¡»ØèÁ User Setting ÊÓËÃѺ¡Ó˹´¤Ø³ÊÁºÑµÔ·Õè«Ñº«é͹ ÃÇÁ·Ñ駢éÍ¡àÇé¹áÅСÒÃ͹Ø−ÒµµèÒ§æ
¡ÒÃãªé¤ÍÁ¾ÔÇàµÍÃì 35
¡ÒÃãªé Samsung Smart Screen
ãªéâ»Ãá¡ÃÁ Samsung Smart Screen à¾×èͨѴàÃÕ§äͤ͹µèÒ§æ º¹à´Ê¡ì·Í»µÒÁµéͧ¡Òà ÃÇÁ·Ñ駨Ѵ¡ÒÃä´é´Õ¢Öé¹´éÇÂ
1. ¤ÅÔ¡ Start > All Programs > Samsung > Samsung Smart Screen
àÁ×èͤسàÃÕ¡ãªéâ»Ãá¡ÃÁ Samsung Smart Screen à»ç¹¤ÃÑé§áá
¨Ð»ÃÒ¡¯ä´ÍÐÅçÍ¡ºçÍ¡«ìÊͺ¶ÒÁÇèҤسµéͧ¡ÒÃãËéâ»Ãá¡ÃÁ»ÃÒ¡¯¢Öé¹·Ø¡¤ÃÑé§àÁ×èÍàÃÔèÁÃкºËÃ×ÍäÁè ËÒ¡¤Ø³àÅ×Í¡
OK â»Ãá¡ÃÁ¨Ð¶Ù¡à»Ô´¢Öé¹â´ÂÍѵâ¹ÁѵԷء¤ÃÑ駷Õè¤Ø³à»Ô´à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì
2. ¨Ð»ÃÒ¡¯â»Ãá¡ÃÁ Samsung Smart Screen ¢Öé¹ àÁ×èͤسÃѹâ»Ãá¡ÃÁ¤ÃÑé§áá ¨Ð»ÃÒ¡¯Ãٻ˴¹éÓ¢Öé¹
¤ÅÔ¡Ãٻ˴¹éÓà¾×èÍà»Ô´
áÅлԴ¡ÅØèÁ
3. ¡ÒÃźäͤ͹ ãËé¤ÅÔ¡Ãٻ˴¹éÓà¾×èÍà»Ô´ ¨Ò¡¹Ñé¹ÅÒ¡äͤ͹ä»ÇÒ§äÇéÂѧË´¹éÓÍ×è¹
¡ÒáÅѺä»Âѧà´Ê¡ì·Í»¢Í§ÇÔ¹â´Çì
¤ÅÔ¡¢ÇÒ·Õè Samsung Smart Screen áÅéǤÅÔ¡·Õè Windows desktop ¨Ð»ÃÒ¡¯à´Ê¡ì·Í»¢Í§ Windows ¢Öé¹
¡ÒáÅѺä»Âѧ Samsung Smart Screen ãËé´ÑºàºÔŤÅÔ¡·Õèäͤ͹ ( ) ·Õè·ÒÊ¡ìºÒÃì
¡ÒÃà»ÅÕ蹩ҡËÅѧËÃ×Í skin
¤ÅÔ¡¢ÇÒ·Õè Samsung Smart Screen áÅéÇàÅ×Í¡ÃÒ¡Ò÷Õèµéͧ¡ÒÃ
36 ¤ÙèÁ×ͼÙéãªé
¡ÒÃãªé Samsung Theme
Samsung Theme ¤×Íâ»Ãá¡ÃÁ·ÕèªèÇÂãËé¼ÙéãªéÊÒÁÒöÊÅѺ¸ÕÁµèÒ§æ ä´éÍÂèÒ§ÃÇ´àÃçÇ (à´Ê¡ì·Í»,
˹éÒ¨ÍÅçÍ¡Í͹áÅЫÒǹ´ìàÍ¿à¿ç¤µì)
´ÑºàºÔŤÅÔ¡·Õèäͤ͹ Samsung Theme ( ) º¹à´Ê¡ì·Í»
(ËÃ×ÍàÅ×Í¡ Start > All Programs > Samsung > Samsung Theme > Samsung Theme)
»ØèÁ»Ô´
»ØèÁÇÔ¸Õãªé
àÅ×è͹àÁÒÊì¾Í¹ìàµÍÃìä»ÇÒ§äÇéà˹×ÍÃÒ¡ÒÃ
Samsung Theme ¨Ð»ÃÒ¡¯ Samsung Theme
¢Öé¹´éÒ¹ÅèÒ§
• Samsung Theme: ÊÅѺä»Âѧ Samsung Theme (à´Ê¡ì·Í», ˹éÒ¨ÍÅçÍ¡Í͹áÅЫÒǹ´ìàÍ¿à¿ç¤µìµÍ¹ºÙµà¤Ã×èͧ)
• Windows XP Theme: ÊÅѺä»Âѧ¸ÕÁ´Õ¿Íŵì¢Í§ Windows XP
• Back: ¡ÅѺä»ãªé¸ÕÁ¡è͹˹éÒ
¡ÒÃãªé¤ÍÁ¾ÔÇàµÍÃì 37
¡ÒÃãªé Samsung Update Plus
Samsung Update Plus ¤×Í«Í¿µìáÇÃì·ÕèãªéµÃǨÊͺáÅÐÍѻവ«Í¿µìáÇÃìáÅÐä´ÃàÇÍÃìµèÒ§æ ¢Í§ Samsung
·ÕèµÔ´µÑé§äÇéã¹à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì Samsung ¢Í§¤Ø³ãËéà»ç¹àÇÍÃìªÑ¹ÅèÒÊØ´ ¡ÒÃãªé Samsung Update Plus
¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³µéͧàª×èÍÁµè͡ѺÍÔ¹àµÍÃìà¹çµ
¡ÒÃÍѻവ«Í¿µìáÇÃìáÅÐä´ÃàÇÍÃì¢Í§ Samsung
1. àÅ×Í¡ Start > All Programs > Samsung > Samsung Update Plus > Samsung Update Plus
ËÒ¡¹Õèà»ç¹¤ÃÑé§áá·Õè¤Ø³Ãѹâ»Ãá¡ÃÁ ¨Ð»ÃÒ¡¯ÇÔ¹â´ÇÊìͺ¶ÒÁÇèҤسàËç¹´éÇ¡Ѻ¢é͵¡Å§ã¹¡ÒÃãªé§Ò¹ËÃ×ÍäÁè
¤ÅÔ¡àÅ×Í¡ Agree à¾×èÍãªé«Í¿µìáÇÃì¹Õé
2. ¤ÅÔ¡ Search for and Install Updates áÅéǤÅÔ¡»ØèÁ Search for New Updates
3. ËÒ¡ÁÕ¡ÒÃÍѻവ«Í¿µìáÇÃìËÃ×Íä´ÃàÇÍÃìÊÓËÃѺà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³ ¨Ð»ÃÒ¡¯ÃÒ¡Òâͧ¡ÒÃÍѻവµèÒ§æ ¢Öé¹
àÅ×Í¡¡ÒÃÍѻവ·Õèµéͧ¡ÒèҡÅÔʵìáÅéǤÅÔ¡ Install Update à¾×èÍàÃÔèÁ¡ÒÃÍѻവ
(ÃÒ¡ÒÃÍѻവº¹Ë¹éÒ¨ÍÍҨᵡµèҧ仵ÒÁÃØ蹢ͧ¤ÍÁ¾ÔÇàµÍÃì·Õèãªé)
38 ¤ÙèÁ×ͼÙéãªé
¡ÒÃÍѻവáµèÅÐÃÒ¡Òõéͧ·Óᡨҡ¡Ñ¹
ËÒ¡¤Ø³àÅ×Í¡ Install â´Â·ÕèÃÒ¡ÒÃÍѻവµéͧµÔ´µÑé§á¡¨Ò¡¡Ñ¹ ¨Ð»ÃÒ¡¯¢éͤÇÒÁá¨é§ãËé¤Ø³·ÃÒº
·ÓµÒÁ¤Óá¹Ð¹Óà¾×èÍ·Ó¡ÒõԴµÑé§ãËé¶Ù¡µéͧ
¡ÒÃáÊ´§ÃÒ¡ÒÃÍѻവÍѵâ¹ÁѵÔ
â´Â¤èÒ´Õ¿ÍÅµì ¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³ä´éÃѺ¡ÒáÓ˹´¤èҤ͹¿Ô¡ãËé¤é¹ËÒ¡ÒÃÍѻവâ´ÂÍѵâ¹ÁÑµÔ ËÒ¡ÁÕ¡ÒÃÍѻവ
ãËÁèæ ¨ÐÁÕ¡ÒÃá¨é§ãËé·ÃÒºÀÒÂã¹¾×é¹·Õèá¨é§àµ×͹ ¤ÅÔ¡ºÍÅÅÙ¹¢Í§äͤ͹ÇÔ¸Õãªéã¹¾×é¹·Õèá¨é§àµ×͹ «Ö觤س¨Ð
ÊÒÁÒö¾ºàÇÍÃìªÑ¹ÅèÒÊØ´¢Í§¡ÒÃÍѻവä´é
¡ÒÃà»ÅÕ蹡ÒáÓ˹´¤èÒÍѻവÍѵâ¹ÁÑµÔ ãËé¤ÅÔ¡»ØèÁ Configuration ã¹ÃÙ»·Õè 2 áÅÐà»ÅÕ蹡ÒõÑ駤èÒ
Samsung Update Plus äÁèÁÕ¡ÒÃÍѻവµèÒ§æ ÊÓËÃѺ«Í¿µìáÇÃìáÅÐä´ÃàÇÍÃìÍ×è¹æ ·ÕèµÔ´µÑé§à¾ÔèÁàµÔÁ
¡ÒÃãªé¤ÍÁ¾ÔÇàµÍÃì 39
¡ÒÃãªé AVStation premium
AVStation premium ÁÕã¹à¤Ã×èͧºÒ§ÃØè¹
AVStation premium ¤×Íâ»Ãá¡ÃÁÁÑŵÔÁÕà´Õ·ÕèªèÇÂãËé¤Ø³ÊÒÁÒöàÃÕ¡ªÁÇÔ´ÕâÍ (ÀÒ¾, ÇÔ´ÕâÍáÅÐÀҾ¹µÃì) áÅпѧà¾Å§ä´é
¤Ø³ÊÒÁÒöàÃÔèÁµé¹ AVStation premium ´Ñ§¹Õé
• àÅ×Í¡ Start > All Programs > Samsung > AVStation premium > AVStation premium
• ´ÑºàºÔŤÅÔ¡·Õèäͤ͹ AVStation premium ( ) ·Õèà´Ê¡ì·Í»ËÃ×Í·ÒÊ¡ìºÒÃì
• ¤ÅÔ¡·Õ»è ØèÁ AVStation premium
»ØèÁ AVStation Premium
¡ÒÃãªé AVStation Premium
âËÁ´µèÒ§æ ¢Í§ AVStation Premium
˹éÒ¨Í Standard mode
˹éÒ¨Í Play Mode
• Standard Mode : ¤Ø³ÊÒÁÒöãªé¿Ñ§¡ìªÑ¹·Ñé§ËÁ´¢Í§ AVStation premium ä´é
• Play Mode : «Öè§ÁÕÍÔ¹àµÍÃìà¿«·Õèãªé§Ò¹§èÒ¡ÇèÒâËÁ´Áҵðҹ (Standard mode) ã¹âËÁ´¹Õé ¿Ñ§¡ìªÑ¹ Edit/Create
áÅÐàÁ¹Ù MOVIE EDITOR ¨ÐäÁèÊÒÁÒöãªé§Ò¹ä´é (¹. 50)
40 ¤ÙèÁ×ͼÙéãªé
- ¤ÙèÁ×͹Õé¨ÐÁØè§Í¸ÔºÒ¡Ãкǹ¡ÒÃÊÓËÃѺ¡ÒÃãªéâËÁ´Áҵðҹ¢Í§ AVStation premium
- ˹éÒ¨Íâ»Ãá¡ÃÁµèÒ§æ 㹤ÙèÁ×͹ÕéÍҨᵡµèÒ§¡Ñ¹ä»àÅ硹éͨҡ«Í¿µìáÇÃì¨ÃÔ§æ â´Â¢Ö鹡ѺàÇÍÃìªÑ¹¢Í§â»Ãá¡ÃÁ
- ÊÓËÃѺÃÒÂÅÐàÍÕ´à¾ÔèÁàµÔÁà¡ÕèÂǡѺ¢Ñ鹵͹µèÒ§æ ãËé´Ù¨Ò¡ÇÔ¸ÕãªéÍ͹äŹì
¡ÒèѴàÃÕ§˹éÒ¨ÍáÅÐàÁ¹Ù¢Í§ AVStation Premium
àÁ¹ÙºÒÃì
ᶺ Menu Selection
ÇÔ¹â´Çì Category
ÇÔ¹â´Çì Library
â»Ãá¡ÃÁ AVStation Premium ã¹ Standard mode »ÃСͺ´éÇÂàÁ¹Ù 4 àÁ¹ÙµèÍ仹Õé
• MUSIC : ´éÇ¡ÒÃãªéàÁ¹Ù¹Õé ¤Ø³ÊÒÁÒöàÅè¹ä¿Åì´¹µÃÕËÃ×Íá¼è¹ÍÍ´ÔâÍ«Õ´Õ ¤Ñ´ÅÍ¡ÍÍ´ÔâÍ«Õ´Õä»Âѧ¤ÍÁ¾ÔÇàµÍÃì
ÃÇÁ·Ñé§àºÔÃì¹á¼è¹ÍÍ´ÔâÍ«Õ´Õä´é
• PHOTO : ´éÇ¡ÒÃãªéàÁ¹Ù¹Õé ¤Ø³ÊÒÁÒöàÃÕ¡´ÙËÃ×Íá¡éä¢ÃÙ» (ÀÒ¾) àÃÕ¡´ÙÃٻẺÊäÅ´ìâªÇì ÊÃéÒ§ÍÑźÑéÁáÅÐàºÔÃì¹
ÍÑźÑéÁŧá¼è¹«Õ´Õä´é
• MOVIE : ´éÇ¡ÒÃãªéàÁ¹Ù¹Õé ¤Ø³ÊÒÁÒöàÅè¹ä¿ÅìÇÔ´ÕâÍ (ÀҾ¹µÃì) ËÃ×Í DVD/VCD ä´é
(¤Ø³ÊÒÁÒöàÅè¹Ë¹Ñ§ DVD ä´éËÅѧ¨Ò¡µÔ´µÑé§â»Ãá¡ÃÁ Power DVD ËÃ×Í DVD player áÅéÇà·èÒ¹Ñé¹)
• MOVIE EDITOR : ´éÇ¡ÒÃãªéàÁ¹Ù¹Õé ¤Ø³ÊÒÁÒöá¡éä¢ä¿ÅìÀҾ¹µÃìä´é
- à¾×èÍãËé¡ÒèѴ¡ÒÃä¿ÅìÁÑŵÔÁÕà´Õ·Óä´éÊдǡ¢Öé¹ ãËéÃÕ¨ÔÊàµÍÃìä¿ÅìÁÑŵÔÁÕà´ÕÂŧã¹äźÃÒÃÕ
(”¡ÒÃÃÕ¨ÔÊàµÍÃìä¿Åì” (¹. 49))
- ¡ÒÃà¢éÒãªéä¿Åì·ÕèÂѧäÁèä´éÃÕ¨ÔÊàµÍÃìŧã¹äźÃÒÃÕ ãËéàÅ×Í¡ File > Open File áÅéÇàÅ×Í¡ä¿Åì·Õèµéͧ¡ÒÃ
¡ÒÃãªé¤ÍÁ¾ÔÇàµÍÃì 41
¡ÒÃàÅ×Í¡àÁ¹ÙµèÒ§æ ¢Í§ AVStation Premium
¡ÒÃàÅ×Í¡àÁ¹Ù ãËéàÅ×Í¡àÁ¹Ù·Õèµéͧ¡Òèҡ ᶺ Menu Selection
MUSIC
Êèǹ¹Õé͸ԺÒ¶֧ÇÔ¸Õ¡ÒÃ㹡ÒÃàÅè¹ä¿Åì´¹µÃÕËÃ×Íá¼è¹ÍÍ´ÔâÍ«Õ´Õ ¤Ñ´ÅÍ¡ÍÍ´ÔâÍ«Õ´Õä»Âѧ¤ÍÁ¾ÔÇàµÍÃìÃÇÁ·Ñé§àºÔÃì¹á¼è¹ÍÍ´ÔâÍ«Õ´Õ
àÅ×Í¡ MUSIC ¨Ò¡á¶º Menu Selection
¡ÒÃàÅè¹ä¿Åìà¾Å§
àÁ¹Ù MUSIC
Music Category
»ØèÁ¤Çº¤ØÁ Media Play
»ØèÁ Repeat
á·Ãç¤ ·Ø¡á·Ãç¤ ÊØèÁ
ÇÔ¹â´Çì Library
Add Music
1. ´ÑºàºÔŤÅÔ¡ Music 㹠ᶺ category ´éÒ¹«éÒÂáÅéǴѺàºÔŤÅÔ¡ ·Õè All musics
2. ´ÑºàºÔŤÅÔ¡·Õèä¿Åìà¾Å§·Õè»ÃÒ¡¯ÍÂÙè·ÕèÊèǹÅèÒ§¢Í§Ë¹éÒ¨Íà¾×èÍàÅè¹
- ¡ÒÃàÅè¹ä¿Åìà¾Å§ËÅÒÂæ ä¿Åì ãËéàÅ×Í¡ä¿Åìà¾Å§µèÒ§æ ·Õèµéͧ¡ÒÃáÅéǤÅÔ¡·Õè Add ä¿Åìà¾Å§µèÒ§æ
¨Ð¶Ù¡àÅè¹µÒÁÅӴѺ·ÕèÁÕ¡ÒÃà¾ÔèÁ
¡ÒÃàÅè¹ÍÍ´ÔâÍ«Õ´Õ
1. ãÊèá¼è¹ÍÍ´ÔâÍ«Õ´Õã¹ä´Ã¿ì«Õ´ÕÃÍÁ
2. àÁ×èÍ»ÃÒ¡¯ÇÔ¹â´Çì Audio CD ¢Öé¹ ãËéàÅ×Í¡ using Samsung AVStation premium áÅéǤÅÔ¡ OK
¨Ò¡¹Ñé¹á¼è¹ÍÍ´ÔâÍ«Õ´Õ¨ÐàÃÔèÁàÅè¹
42 ¤ÙèÁ×ͼÙéãªé
- ¡ÒÃàÅè¹á¼è¹ÍÍ´ÔâÍ«Õ´Õã¹ä´Ã¿ì«Õ´ÕÃÍÁ ãËé´ÑºàºÔŤÅÔ¡·Õè«Õ´Õ¨Ò¡ Category áÅéǴѺàºÔŤÅÔ¡·Õè Audio CD àÁ×èÍ»ÃÒ¡¯ Audio
CD ¢Öé¹·ÕèÊèǹÅèÒ§¢Í§Ë¹éÒ¨Í
ÇÔ¹â´Çì Audio CD
¡ÒäѴÅÍ¡ÍÍ´ÔâÍ«Õ´Õä»Âѧà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì
1. ãÊèá¼è¹ÍÍ´ÔâÍ«Õ´Õã¹ä´Ã¿ì«Õ´ÕÃÍÁ
2. àÁ×èÍ»ÃÒ¡¯ÇÔ¹â´Çì Audio CD ¢Öé¹ ãËéàÅ×Í¡ using Samsung AVStation premium áÅéǤÅÔ¡ OK
3. àÅ×Í¡á·Ã礷Õèµéͧ¡ÒäѴÅÍ¡ä»ÂѧäźÃÒÃÕáÅéÇàÅ×Í¡ Tools > Copy from CD
- ¡ÒÃàÅ×Í¡ËÅÒÂæ á·Ãç¤ ãËéàÅ×Í¡á·Ã礵èÒ§æ ¢³Ð·Õè¡´»ØèÁ Shift ËÃ×Í Ctrl º¹á»é¹¾ÔÁ¾ì
àÅ×Í¡ Copy from CD
àÅ×Í¡á·Ã礵èÒ§æ ·Õèµéͧ¡ÒäѴÅÍ¡
4. á·Ã礵èÒ§æ ·ÕèàÅ×Í¡äÇé¨Ð¶Ù¡¤Ñ´ÅÍ¡¨Ò¡á¼è¹ÍÍ´ÔâÍ«Õ´Õ ËÅѧ¨Ò¡¡ÒäѴÅÍ¡¢éÍÁÙÅàÊÃç¨áÅéÇ ¨Ð»ÃÒ¡¯¢éͤÇÒÁ Copy
Completed ¢Öé¹
á·Ã礵èÒ§æ ·Õè¶Ù¡¤Ñ´ÅÍ¡¨Ð¶Ù¡ºÑ¹·Ö¡äÇéã¹â¿Åà´ÍÃì My Documents > AVStation Premium > Music > Music From CD
¡ÒÃãªé¤ÍÁ¾ÔÇàµÍÃì 43
¡ÒÃàºÔÃì¹ÍÍ´ÔâÍ«Õ´Õ
1. ãÊèá¼è¹«Õ´Õà»ÅèÒŧã¹ä´Ã¿ì«Õ´ÕÃÍÁ àÁ×èÍ»ÃÒ¡¯ÇÔ¹â´Çì CD Drive ¢Öé¹ ãËé¤ÅÔ¡ Cancel
2. àÅ×Í¡ Tools > Burn CD
àÅ×Í¡ Burn CD
3. àÅ×Í¡ Burn Audio CD áÅéǤÅÔ¡ Next
4. ´ÑºàºÔŤÅÔ¡·Õè Music ·Õè ª×èÍ´éÒ¹«éÒ áÅéǴѺàºÔŤÅÔ¡·Õè All musics
5. àÅ×Í¡ ä¿Åìà¾Å§µèÒ§æ ¨Ò¡ÅÔʵìáÅéǤÅÔ¡·Õè»ØèÁ Add files from my PC to the CD burning list (
) à¾×èÍÂéÒÂä¿ÅìµèÒ§æ
·ÕèàÅ×Í¡ä»ÂѧÇÔ¹â´Çì Burn Audio CD ·Ò§´éÒ¹¢ÇÒ àÁ×èͤسä´éà¾ÔèÁä¿Åìà¾Å§·Ñé§ËÁ´áÅéÇ ãËé¤ÅÔ¡Next
6. àÅ×Í¡ CD Writer áÅéǤÅÔ¡·Õè Start àÁ×èÍ»ÃÒ¡¯ÇÔ¹â´Çì Burn CD ¢Öé¹ ãËé¤ÅÔ¡ OK à¾×èÍÊÃéÒ§á¼è¹ÍÍ´ÔâÍ«Õ´Õ
¡ÒÃÊÃéÒ§à¾ÅÂìÅÔʵì
à¾ÅÂìÅÔʵì¤×ÍÅÔʵì¢Í§ä¿Åìà¾Å§µèÒ§æ ·Õèä´éàÅ×Í¡äÇé «Ö觶١ÊÃéÒ§¢Öé¹â´Â¼Ùéãªéà¾×èÍãËéÊÒÁÒöàÅè¹ä¿ÅìµèÒ§æ ·Õèä´éàÅ×Í¡äÇé¹Õéä´éÍÕ¡ ÀÒÂËÅѧ
1. àÅ×Í¡ä¿Åìà¾Å§·Õèµéͧ¡ÒÃãËéºÑ¹·Ö¡Å§ã¹à¾ÅÂìÅÔʵì¨Ò¡»ÃÐàÀ·¢Í§´¹µÃÕ áÅéǤÅÔ¡·Õè Add
2. ËÅѧ¨Ò¡ä´éà¾ÔèÁÃÒ¡ÒÃä¿Åìà¾Å§·Ñé§ËÁ´·Õè¤Ø³µéͧ¡ÒÃáÅéÇ ãËé¤ÅÔ¡·Õè Save As Playlist
3. µÑ駪×èÍà¾ÅÂìÅÔʵìãËÁè áÅéǤÅÔ¡ OK
4. àÁ×èÍ»ÃÒ¡¯¢éͤÇÒÁ á¨é§¡Ò÷ӧҹàÊÃç¨ÊÁºÙóìáÅéÇ ãËé¤ÅÔ¡ OK
à¾ÅÂì·Õè¤Ø³ÊÃéÒ§¢Ö鹨ж١ºÑ¹·Ö¡ã¹â¿Åà´ÍÃì C:\Program Files\Samsung\AVStation Premium\My Playlist
¡ÒÃàÅè¹à¾ÅÂìÅÔʵì
1. ¤ÅÔ¡·Õè Load Playlist ·Õè´éÒ¹ÅèÒ§ÇÔ¹â´Çì Library
2. àÅ×Í¡à¾ÅÂìÅÔʵì áÅéǤÅÔ¡ OK à¾×èÍàÃÔèÁàÅè¹
44 ¤ÙèÁ×ͼÙéãªé
PHOTO
Êèǹ¹Õé͸ԺÒ¶֧¡Ãкǹ¡ÒÃ㹡ÒÃàÃÕ¡´ÙÃÙ» (ÀÒ¾) ¡ÒôÙÃÙ»´éÇÂÊäÅ´ìâªÇì ¡ÒÃá¡éä¢ÀÒ¾ ¡ÒÃÊÃéÒ§ÍÑźÑéÁ
áÅСÒÃàºÔÃì¹ÍÑźÑéÁŧ«Õ´Õ
¤ÅÔ¡ on PHOTO ã¹á¶º Menu Selection
¡ÒÃàÃÕ¡´ÙáÅÐá¡éä¢ÃÙ»
1. ´ÑºàºÔŤÅÔ¡·Õè Image ã¹ Êèǹ category ´éÒ¹«éÒ áÅéǴѺàºÔŤÅÔ¡·Õè All Images
2. ä¿ÅìÀÒ¾¨Ð¶Ù¡áÊ´§ã¹ÇÔ¹â´Çì Image ·Ò§¢ÇÒ ¡ÒëÙÁÀÒ¾ ãËé´ÑºàºÔŤÅÔ¡·Õèä¿ÅìÀÒ¾
àÁ¹Ù PHOTO
⊕
MUSIC
¤Ø³ÊÒÁÒö¿Ñ§ä¿Åìà¾Å§ã¹ My
Playlist ËÃ×Í All musics
ä´é¢³Ð·Õèá¡éä¢ÀÒ¾
ÇÔ¹â´Çì Image
Image Category
ÇÔ¹â´Çì Library
¡ÒÃàÃÕ¡´ÙÅÔʵì¢Í§ÀÒ¾
àÅ×Í¡ View Image List ¨Ò¡àÁ¹Ù·ÕèÊèǹÅèÒ§¢Í§Ë¹éҨͫÙÁÀÒ¾
¡ÒÃàÃÕ¡´ÙÀÒ¾â´ÂãªéÊäÅ´ìâªÇì (Slide Show) ËÃ×ÍẺàµçÁ˹éÒ¨Í (Full Screen)
àÅ×Í¡ Slide Show ËÃ×Í Full Screen ¨Ò¡àÁ¹Ù´éÒ¹ÅèÒ§¢Í§Ë¹éҨͫÙÁ·ÕèÀÒ¾
㹡ÒÃÍÍ¡¨Ò¡ÊäÅ´ìâªÇìËÃ×Í¡ÒÃáÊ´§¼ÅàµçÁ˹éÒ¨Í ãËé¡´»ØèÁ <Esc> ËÃ×ͤÅÔ¡¢ÇÒáÅÐàÅ×Í¡ Exit SlideShow ËÃ×Í
Exit Full Screen
¡ÒÃá¡éä¢ÀÒ¾
1. àÅ×Í¡ÀÒ¾·Õèµéͧ¡ÒÃá¡éä¢áÅéÇàÅ×Í¡á·çº Edit Image
2. á¡éä¢ÀÒ¾â´Âãªé·ÙÅ Shape/Edit/Effect áÅéǤÅÔ¡·Õè Save ËÃ×Í Save Copy
¡ÒÃãªé¤ÍÁ¾ÔÇàµÍÃì 45
¡ÒÃÊÃéÒ§ÍÑźÑéÁ
1. àÅ×Í¡á·çº Create Album
2. àÅ×Í¡ ÃٻẺ¢Í§ album cover áÅéǤÅÔ¡·Õè Apply à¾×èÍãªéÊäµÅì·ÕèàÅ×Í¡ãËéà»ç¹ album cover
3. »é͹ ª×èÍáÅÐà¹×éÍËҢͧÍÑźÑéÁ à¾ÔèÁÀÒ¾áÅéǤÅÔ¡ (àÅ×è͹ä»Âѧ˹éҶѴä»)
- ¡ÒÃà¾ÔèÁÀÒ¾ ãËéÅÒ¡áÅéÇÇÒ§ä¿Åì¨Ò¡ Category ä»Âѧ Image box
á·çº Create Album
»é͹ª×èÍáÅÐà¹×éÍËҢͧÍÑźÑéÁ
ÅÒ¡áÅÐÇÒ§ä¿ÅìÀÒ¾
ä»Âѧ Image Box
»ØèÁ Slide Show
»ØèÁ Move to next page
»ØèÁ Save
4. àÅ×Í¡ä¿ÅìÀÒ¾¨Ò¡ ¡ÅØèÁ All images ·Ò§´éÒ¹«éÒÂáÅéÇÅÒ¡áÅÐÇÒ§ä¿Åìä»ÂѧÍÑźÑéÁ·Ò§¢ÇҢͧ˹éÒ¨Í »é͹¢éͤÇÒÁ
·Õèµéͧ¡ÒÃà¾ÔèÁ
5. àÁ×èÍ¡ÒÃÊÃéÒ§ÍÑźÑéÁàÊÃç¨ÊÁºÙóì ãËé¤ÅÔ¡·Õè Save à¾×èÍÊÃéÒ§ ÍÑźÑéÁ
ÍÑźÑéÁ·ÕèÊÃéÒ§¢Ö鹨ж١ºÑ¹·Ö¡äÇéã¹â¿Åà´ÍÃì My Documents > AVStation Premium > Photo > Photo Album áÅШÐáÊ´§
㹡ÅØèÁ Album
- ¡ÒÃàÃÕ¡´ÙÍÑźÑéÁ ãËé´ÑºàºÔŤÅÔ¡·Õè Image ã¹ ¾×é¹·Õè category ´éÒ¹«éÒÂáÅéǴѺàºÔŤÅÔ¡·Õè Album ¤ÅÔ¡·Õè Slide Show ã¹
ÇÔ¹â´Çì Image à¾×èÍ´ÙÀÒ¾µèÒ§æ ã¹ÍÑźÑéÁâ´ÂãªéÊäÅ´ìâªÇì
¡ÒÃàºÔÃì¹ÍÑźÑéÁä»Âѧá¼è¹«Õ´Õ
1. ´ÑºàºÔŤÅÔ¡·ÕèÍÑźÑéÁà¾×èÍàºÔÃì¹ä»Âѧ«Õ´Õ㹡ÅØèÁ Album ´éÒ¹«éÒÂ
2. ãÊèá¼è¹«Õ´Õà»ÅèÒŧã¹ä´Ã¿ì CD-RW àÁ×èÍ»ÃÒ¡¯ÇÔ¹â´Çì CD Drive ¢Öé¹ ãËé¤ÅÔ¡·Õè Cancel
3. àÅ×Í¡ Send > Burn CD ¨Ò¡àÁ¹Ù·Õè´éÒ¹ÅèÒ§¢Í§ÇÔ¹â´Çì Album
4. »é͹ª×èÍ CD ŧã¹ÇÔ¹â´Çì Burn a CD áÅéǤÅÔ¡ OK à¾×èÍàºÔÃì¹á¼è¹ÍÑźÑéÁŧã¹á¼è¹«Õ´Õ
46 ¤ÙèÁ×ͼÙéãªé
MOVIE
Êèǹ¹Õé͸ԺÒÂà¡ÕèÂǡѺ¡Ãкǹ¡ÒÃ㹡ÒÃàÅè¹ä¿ÅìÀҾ¹µÃìËÃ×Íá¼è¹ DVD/VCD
¤ÅÔ¡·Õè MOVIE ã¹á¶º Menu Selection
¡ÒÃàÅè¹ÀҾ¹µÃì
1. ´ÑºàºÔŤÅÔ¡·Õè Movie ã¹¾×é¹·Õè´éÒ¹«éÒÂáÅéǴѺàºÔŤÅÔ¡·Õè All movies
2. ´ÑºàºÔŤÅÔ¡·Õèä¿ÅìÀҾ¹µÃì à¾×èÍàÅè¹ä¿Åì´Ñ§¡ÅèÒÇ
⊕ MUSIC
¤Ø³ÊÒÁÒö¿Ñ§ä¿Åìà¾Å§ã¹ My
Playlist ËÃ×Í All musics
ä´é¢³Ð·Õè·Ó§Ò¹
àÁ¹Ù MOVIE
ÇÔ¹â´Çì Movie
Movie Category
ÇÔ¹â´Çì Library
¤Ø³ÊÒÁÒö»ÃѺ¢¹Ò´Ë¹éÒ¨Íä´éã¹àÁ¹Ù View
㹡ÒÃàÅè¹ÀҾ¹µÃì´ÕÇÕ´Õ â»Ã´µÔ´µÑ駫ͿµìáÇÃìàÅè¹ DVD Power DVD ¡è͹
¡ÒÃàÅè¹á¼è¹ DVD
¤Ø³ÊÒÁÒöàÅè¹á¼è¹ DVD ä´éËÅѧ¨Ò¡µÔ´µÑé§â»Ãá¡ÃÁàÅè¹ DVD, Samsung DVD (Power DVD) áÅéÇà·èÒ¹Ñé¹
1. ãÊèá¼è¹ DVD ŧã¹ä´Ã¿ì DVD
2. àÁ×èÍ»ÃÒ¡¯ÇÔ¹â´Çì Select Work ¢Öé¹ ãËéàÅ×Í¡ using Samsung AVStation premium áÅéǤÅÔ¡ OK à¾×èÍàÅè¹á¼è¹
DVD
ËÒ¡á¼è¹ DVD äÁèàÅè¹â´ÂÍѵâ¹ÁÑµÔ ËÃ×Íá¼è¹ DVD ÍÂÙèã¹ä´Ã¿ì DVD áÅéÇ ãËé´ÑºàºÔŤÅÔ¡·Õèª×èÍ DVD ã¹»ÃÐàÀ·
DVD / VCD
¡ÒÃàÅè¹á¼è¹ VCD
1. ãÊèá¼è¹ VCD ŧã¹ä´Ã¿ì«Õ´Õ
2. ´ÑºàºÔŤÅÔ¡·Õèª×èÍ VCD ã¹»ÃÐàÀ· DVD / VCD
¡ÒÃãªé¤ÍÁ¾ÔÇàµÍÃì 47
Movie Editor (µÑ´µèÍÀҾ¹µì)
Êèǹ¹Õé¨Ð͸ԺÒ¶֧¡ÒõѴµèÍÀҾ¹µÃì
¤ÅÔ¡·Õè MOVIE EDITOR ã¹á¶º Menu Selection
¡ÒõѴµèÍÀҾ¹µÃì
¡Ãкǹ¡ÒÃÊÓËÃѺ¡ÒõѴµèÍä¿ÅìÀҾ¹µÃìÊͧä¿ÅìáÅÐÊÓËÃѺà¾ÔèÁàͿ࿤µì㹡ÒÃà»ÅÕè¹ÀÒ¾ÃÐËÇèÒ§ÀҾ¹µÃì´Ñ§¡ÅèÒÇ
ÁÕ¤Ó͸ԺÒ´ѧµèÍ仹Õé
1. ¤ÅÔ¡·Õè MOVIE EDITOR â»ÃਤµìãËÁè¨Ð¶Ù¡à»Ô´¢Öé¹
2. ´ÑºàºÔŤÅÔ¡·Õè Movie ã¹¾×é¹·Õè´éÒ¹«éÒÂáÅéǴѺàºÔŤÅÔ¡·Õè All movies
3. ÅÒ¡áÅéÇÇÒ§ä¿ÅìÀҾ¹µÃìä»Âѧ Storyboard àÁ×èÍ Storyboard »ÃÒ¡¯¢Öé¹·Õè¾×é¹·Õè´éÒ¹¢ÇÒ ãËéÅÒ¡áÅéÇÇÒ§ä¿ÅìÀҾ¹µÃìÍ×è¹æ
ä»Âѧ Storyboard
⊕ MUSIC
¤Ø³ÊÒÁÒö¿Ñ§ä¿Åìà¾Å§ã¹
My Playlist ËÃ×Í All musics
ä´é¢³Ð·Õè·Ó§Ò¹
àÁ¹Ù MOVIE EDITOR
á·çº Work
Movie Category
Storyboard
´¹µÃÕáºç¤¡ÃÒǹ´ì
ÊÃéÒ§ÀҾ¹µÃì (Create Movie)
• ¡Òûé͹ª×èÍ : ¤ÅÔ¡·Õè ¡Ãͺ¢éͤÇÒÁ ã¹á·çº Title ÊÃéÒ§¡Ãͺ¢éͤÇÒÁ¢Ö鹺¹Ë¹éÒ¨Í »é͹ª×èÍáÅéǤÅÔ¡ Apply
ª×èʹѧ¡ÅèÒǨж١à¾ÔèÁŧ·ÕèÊèǹµé¹¢Í§ Storyboard
á·çº Title
ãªé (Apply)
à¾ÔèÁª×èÍ (Applied Title)
•
àͿ࿤µì˹éÒ¨Í (Screen Effect) : àÅ×Í¡àͿ࿤µì¨Ò¡á·çº Effect áÅéÇÅÒ¡áÅÐÇÒ§àͿ࿤µì·Õèµéͧ¡ÒÃä»ÂѧÀҾ¹µìã¹
Storyboard à¾×èÍãªéàͿ࿤µì¹Ñé¹
48 ¤ÙèÁ×ͼÙéãªé
•
¡ÒÃà»ÅÕè¹ÀÒ¾ (Transition) : àÅ×Í¡ Transition effect ¨Ò¡á·çº Transition áÅéÇÅÒ¡áÅÐÇÒ§àͿ࿤µì·Õèµéͧ¡ÒÃ
ä»ÂѧÀҾ¹µìã¹ Storyboard à¾×èÍãªéàͿ࿤µì㹡ÒÃà»ÅÕè¹ÀÒ¾¹Ñé¹
á·çº Transition
àÅ×Í¡ Transition Effect áÅéÇÅÒ¡ä»ÇÒ§ã¹
µÓá˹觷Õèµéͧ¡ÒÃà¾ÔèÁàͿ࿤µì
µÓá˹觢ͧ
Transition Effect
•
´¹µÃÕáºç¤¡ÃÒǹ´ì : ¤ÅÔ¡·Õè Music áÅéÇàÅ×Í¡ä¿Åì à¾Å§à¾×èÍãªéà»ç¹áºç¤¡ÃÒǹ´ìä»Âѧä¿ÅìÀҾ¹µÃì
4. ËÅѧ¨Ò¡ µÑ´µèÍÀҾ¹µÃìáÅéÇ ãËé¤ÅÔ¡·Õè Create Movie áÅéǤÅÔ¡ OK à¾×èÍÊÃéÒ§ä¿ÅìÀҾ¹µÃì¨Ò¡ä¿Åì·Õèä´é·Ó¡ÒÃá¡éä¢
ä¿ÅìÀҾ¹µÃì·ÕèÊÃéÒ§¢Ö鹨ж١ºÑ¹·Ö¡äÇéã¹â¿Åà´ÍÃì My Documents > AVStation Premium > Movie > Edited Movie
áÅШÐáÊ´§ã¹¡ÅØèÁ My Movie
¡ÒÃÃÕ¨ÔÊàµÍÃìä¿Åì
¡ÒÃÃÕ¨ÔÊàµÍÃìä¿ÅìÁÑŵÔÁÕà´ÕÂŧã¹äźÃÒÃÕ ¤Ø³¨ÐÊÒÁÒöàÃÕ¡ãªé§Ò¹áÅШѴ¡ÒÃä¿ÅìµèÒ§æ ä´éÊдǡ¢Öé¹ à¹×èͧ¨Ò¡¨Ð»ÃÒ¡¯
ÍÂÙè㹡ÅØèÁµèÒ§æ àªè¹ Music, Image, Movie ·Õè´éÒ¹«éÒ¢ͧ˹éÒ¨Í
ã¹µÑÇÍÂèÒ§µèÍ仹Õé¨Ðà»ç¹¡Ãкǹ¡ÒÃ㹡ÒÃÃÕ¨ÔÊàµÍÃìä¿Åì·Ñé§â¿Åà´ÍÃìŧã¹äźÃÒÃÕ
1. ¤ÅÔ¡·Õè Register File ·Õè´éÒ¹ÅèÒ§¢Í§Ë¹éÒ¨Í
2. ¤ÅÔ¡·Õè Add by folder áÅéÇàÅ×Í¡â¿Åà´ÍÃì·Õèµéͧ¡ÒÃÃÕ¨ÔÊàµÍÃì ¨Ò¡¹Ñ鹤ÅÔ¡OK
3. ËÅѧ¨Ò¡¡ÒÃÃÕ¨ÔÊàµÍÃìàÊÃç¨ÊÁºÙóìáÅéÇ ãËé¤ÅÔ¡ OK
¨Ð»ÃÒ¡¯â¿Åà´ÍÃì¢Í§ÁÑŵÔÁÕà´Õ·ÕèÃÕ¨ÔÊàµÍÃìáÅéÇ㹡ÅØèÁ music, image ËÃ×Í video ¢Í§äźÃÒÃÕ
¡ÒÃàÅè¹ä¿Åì·ÕèÂѧäÁèä´éÃÕ¨ÔÊàµÍÃìŧ㹡ÅØèÁ ãËéàÅ×Í¡ File > Open File áÅéÇàÅ×Í¡ä¿Åì·Õèµéͧ¡ÒÃ
¡ÒÃãªé¤ÍÁ¾ÔÇàµÍÃì 49
¡ÒÃãªé Play Mode
Êèǹ¹Õé¨Ð͸ԺÒ¶֧ÇÔ¸Õ¡ÒÃãªéâËÁ´¡ÒÃàÅè¹ (Play Mode) ¢Í§ AVStation Premium
¡ÒÃãªé Play Mode ãËéàÅ×Í¡ Mode > Play Mode ã¹á¶ºàÁ¹Ù Standard Mode
ÃٻẺ˹éÒ¨Í Play Mode
˹éÒ¨Íáá¢Í§ Play Mode ¢Í§ AVStation premium à»ç¹´Ñ§¹Õé
ᶺàÅ×è͹ (Move Bar)
¨Ð»ÃÒ¡¯¢Öé¹àÁ×èÍÁÕ¡ÒÃàÅ×è͹àÁÒÊì
¾Í¹ìàµÍÃìä»äÇéà˹×ͺÃÔàdz¹Õé
ÍÍ¡¨Ò¡â»Ãá¡ÃÁ (Exit Program)
ÂèÍ˹éÒ¨Í (Minimize Screen )
¡ÅѺä»Âѧ˹éÒ¨Íáá
¢Í§ Play Mode
ÊÅѺä»ÂѧâËÁ´Áҵðҹ
(Standard Mode)
àÁ¹Ù
MUSIC
͸ԺÒ¶֧ÇÔ¸Õ¡ÒÃàÅè¹ä¿Åìà¾Å§ËÃ×ÍÍÍ´ÔâÍ«Õ´Õ
´ÑºàºÔŤÅÔ¡ MUSIC ã¹Ë¹éÒ¨Íáá¢Í§ Play Mode
ÇÔ¹â´Çì Library
ÇÔ¹â´Çì Category
»ØèÁ Repeat
á·Ãç¤ ·Ø¡á·Ãç¤ ÊØèÁ
»ØèÁ¤Çº¤ØÁ Media Play
ÇÔ¹â´Çì Operation Display
50 ¤ÙèÁ×ͼÙéãªé
¡ÒÃàÅè¹ä¿Åìà¾Å§
1. ´ÑºàºÔŤÅÔ¡¡ÅØèÁ¨Ò¡ÇÔ¹â´Çì´éÒ¹«éÒÂ
2. ´ÑºàºÔŤÅÔ¡ä¿Åìà¾Å§ã¹ÇÔ¹â´ÇìäźÃÒÃÕ´éÒ¹¢ÇÒ à¾Å§¨Ð¶Ù¡àÅè¹
¡ÒÃàÅè¹ÍÍ´ÔâÍ«Õ´Õ
1. ãÊèá¼è¹ÍÍ´ÔâÍ«Õ´Õã¹ä´Ã¿ì«Õ´ÕÃÍÁ ÍÍ´ÔâÍ«Õ´Õ¨ÐàÃÔèÁàÅè¹ã¹ÇÔ¹â´ÇìäźÃÒÃÕ
¡ÒÃàÅè¹ÍÍ´ÔâÍ«Õ´Õã¹ä´Ã¿ì«Õ´ÕÃÍÁ ãËé´ÑºàºÔŤÅÔ¡·Õè«Õ´Õ㹡ÅØèÁ
2. ´ÑºàºÔŤÅÔ¡ Audio CD ã¹ÇÔ¹â´Çì library á·Ã礵èÒ§æ ¢Í§«Õ´Õ¨Ð»ÃÒ¡¯¢Öé¹
3. ´ÑºàºÔŤÅÔ¡·Õèá·Ãç¤à¾×èÍàÅè¹á·Ã礴ѧ¡ÅèÒÇ
¡Òÿѧá·Ã礷Ñé§ËÁ´
àÅ×Í¡ Play All Tracks ¨Ò¡»ØèÁ¤Çº¤ØÁ¡ÒÃàÅè¹ÁÕà´ÕÂ
PHOTO (¡ÒôÙÃÙ»)
¤Ó͸ԺÒÂà¡ÕèÂǡѺ¡Ãкǹ¡ÒÃ㹡ÒÃàÃÕ¡´ÙÃÙ» (ÀÒ¾) áÅÐÊÓËÃѺ¡ÒÃàÃÕ¡´ÙÃÙ»µèÒ§æ â´ÂãªéÊäÅ´ìâªÇì (Slide Show)
1. ´ÑºàºÔŤÅÔ¡·Õè PHOTO ã¹Ë¹éÒ¨Íáá¢Í§ Play Mode
2. ¤ÅÔ¡·Õè All Images ã¹ ¾×é¹·Õè¡ÅØèÁ·Ò§«éÒ áÅéǴѺàºÔŤÅÔ¡·Õèä¿ÅìÀÒ¾ã¹ÇÔ¹â´ÇìäźÃÒÃÕà¾×èÍ«ÙÁÀÒ¾
ÇÔ¹â´Çì Category
ÇÔ¹â´Çì Library
⊕ MUSIC
¤Ø³ÊÒÁÒö¿Ñ§ä¿Åìà¾Å§ã¹
My Playlist ËÃ×Í All musics
ä´é¢³Ð·Õè·Ó§Ò¹
¡ÒÃàÃÕ¡´ÙÀÒ¾â´ÂãªéÊäÅ´ìâªÇì (Slide Show) ËÃ×ÍẺàµçÁ˹éÒ¨Í (Full Screen)
àÅ×Í¡ Slide Show ËÃ×Í Full Screen ¨Ò¡àÁ¹Ù´éÒ¹ÅèÒ§¢Í§Ë¹éҨͫÙÁ·ÕèÀÒ¾
¡ÒÃãªé¤ÍÁ¾ÔÇàµÍÃì 51
MOVIE (¡ÒÃàÅè¹ÀҾ¹µÃì)
͸ԺÒ¶֧ÇÔ¸Õ¡ÒÃàÅè¹ä¿ÅìÀҾ¹µÃì ËÃ×Íá¼è¹ DVD/VCD
1. ´ÑºàºÔŤÅÔ¡ MOVOE ã¹Ë¹éÒ¨Íáá¢Í§ Play Mode
2. ¤ÅÔ¡·Õè All movies ã¹ ¾×é¹·Õè¡ÅØèÁ´éÒ¹«éÒÂáÅéǴѺàºÔŤÅÔ¡·Õèä¿ÅìÀҾ¹µÃì·Ò§¢ÇÒ ÀҾ¹µÃì¨Ð¶Ù¡àÅè¹
ÇÔ¹â´Çì Category
ÇÔ¹â´Çì Library
⊕ MUSIC
¤Ø³ÊÒÁÒö¿Ñ§ä¿Åìà¾Å§ã¹
My Playlist ËÃ×Í All musics
ä´é¢³Ð·Õè·Ó§Ò¹
¡ÒÃàÅè¹á¼è¹ DVD
1. ãÊèá¼è¹ DVD ŧã¹ä´Ã¿ì DVD
2. àÁ×èÍ»ÃÒ¡¯ÇÔ¹â´Çì Select Work ¢Öé¹ ãËéàÅ×Í¡ using Samsung AVStation premium áÅéǤÅÔ¡ OK à¾×èÍàÅè¹á¼è¹
DVD
ËÒ¡á¼è¹ DVD äÁèàÅè¹â´ÂÍѵâ¹ÁÑµÔ ËÃ×Íá¼è¹ DVD ÍÂÙèã¹ä´Ã¿ì DVD áÅéÇ ãËé´ÑºàºÔŤÅÔ¡·Õèª×èÍ DVD ã¹»ÃÐàÀ·
DVD / VCD
¡ÒÃàÅè¹á¼è¹ VCD
1. ãÊèá¼è¹ VCD ŧã¹ä´Ã¿ì«Õ´Õ
2. ´ÑºàºÔŤÅÔ¡·Õèª×èÍ VCD ã¹»ÃÐàÀ· DVD / VCD
52 ¤ÙèÁ×ͼÙéãªé
¡ÒÃãªé AVStation now
AVStation now ÁÕ੾ÒÐã¹à¤Ã×èͧºÒ§ÃØè¹
AVStation now ¤×Íâ»Ãá¡ÃÁÁÑŵÔÁÕà´Õ·ÕèªèÇÂãËé¤Ø³ÊÒÁÒöàÃÕ¡ªÁÇÔ´ÕâÍ (ÀÒ¾, ÇÔ´ÕâÍáÅÐÀҾ¹µÃì) áÅпѧà¾Å§ä´é
¡ÒÃãªé AVStation now
ÇÔ¸Õ¡ÒÃàÃÕ¡ãªé AVStation now áÅФسÊÁºÑµÔµèÒ§æ ¢Í§ AVStation ÁÕ¡ÒÃ͸ԺÒÂäÇéã¹ÊèǹµèÍ仹Õé
¢Ñ鹵͹¡ÒÃãªé AVStation now ¨Ð¤ÅéÒ¡Ѻ Play Mode ¢Í§ AVStation premium
AVStation now ʹѺʹع੾Òпѧ¡ìªÑ¹àÅè¹áÅÐÃѺªÁà·èÒ¹Ñé¹ ¡ÒÃÃÕ¨ÔÊàµÍÃìä¿ÅìµèÒ§æ ä»ÂѧäźÃÒÃÕ ãËéãªé¿Ñ§¡ìªÑ¹
registration ¢Í§ AVStation premium
¡ÒÃà»Ô´ãªé AVStation now
¤Ø³ÊÒÁÒöãªé AVStation now àÁ×èͤÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³ÂѧäÁèä´éà»Ô´ËÃ×ÍÍÂÙèã¹âËÁ´»ÃÐËÂÑ´¾Åѧ§Ò¹ÊÙ§ÊØ´
”¡ÒÃãªéµÑÇàÅ×Í¡¡ÒÃãªé¾Åѧ§Ò¹ (Power Management)” (¹. 104)
㹡ÒÃàÃÕ¡ãªé AVStation now ãËé¤ÅÔ¡·Õè»ØèÁ AVStation now
»ØèÁ AVStation now
¡ÒÃãªé¤ÍÁ¾ÔÇàµÍÃì 53
¡ÒÃÍÍ¡¨Ò¡ AVStation now
1. ¡´»ØèÁ <Esc> ËÃ×ͤÅÔ¡¢ÇÒà¾×èÍà¢éÒÊÙè˹éÒ¨ÍàÃÔèÁµé¹¢Í§ AVStation now
2. ã¹Ë¹éÒ¨ÍàÃÔèÁµé¹ ãËé¡´»ØèÁ <Esc> ËÃ×ÍàÅ×Í¡ Exit
3. ã¹ÇÔ¹â´Çì Exit ãËéàÅ×Í¡ Exit
¡ÒúٵáÅÐãªéà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃ좳Ðãªé AVStation now
ãËéàÅ×Í¡ <Go Window> ¨Ò¡ÇÔ¹â´Çì Exit ¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³¨ÐàÃÔèÁ·Ó§Ò¹
àÁ¹ÙµèÒ§æ ¢Í§ AVStation now
AVStation now »ÃСͺ´éÇÂàÁ¹ÙµèÒ§æ 3 àÁ¹Ù´Ñ§¹Õé
àÁ¹Ù
•
•
•
54 ¤ÙèÁ×ͼÙéãªé
MUSIC : ´éÇ¡ÒÃãªéàÁ¹Ù¹Õé ¤Ø³ÊÒÁÒöàÅè¹ä¿Åìà¾Å§ËÃ×ÍÍÍ´ÔâÍ«Õ´Õä´é
PHOTO : ´éÇÂàÁ¹Ù¹Õé ¤Ø³ÊÒÁÒö´ÙÃÙ» (ÀÒ¾) áÅдÙÃÙ»ä´éâ´ÂãªéÊäÅ´ìâªÇì (Slide Show)
MOVIE : ´éÇ¡ÒÃãªéàÁ¹Ù¹Õé ¤Ø³ÊÒÁÒöàÅè¹ä¿ÅìÇÔ´ÕâÍ (ÀҾ¹µÃì) ËÃ×Í DVD/VCD ä´é
¡ÒÃãªé AVStation now
ÁÕ¡ÒÃ͸ԺÒ¶֧¢Ñ鹵͹㹡ÒÃãªé AVStation now äÇéã¹ÊèǹµèÍ仹Õé
¡ÒÃàÅè¹ (Move) ãËéàÅ×Í¡àÁ¹Ù Run
¤Ø³ÊÒÁÒöãªéá»é¹¾ÔÁ¾ìáÅÐàÁÒÊìÊÓËÃѺ AVStation now
• ¡ÒÃÂéÒÂàÁ¹ÙËÃ×ÍÃÒ¡ÒÃ
¡´»ØèÁ ÅÙ¡Èà ·Õèá»é¹¾ÔÁ¾ìËÃ×ÍàÅ×è͹ àÁÒÊì à¾×èÍàÅ×è͹à¤ÍÃìà«ÍÃìä»·ÕèàÁ¹ÙËÃ×ÍÃÒ¡Òà áÅФÅÔ¡
• ¡ÒÃàÅ×Í¡ËÃ×ÍÃѹ àÁ¹ÙËÃ×ÍÃÒ¡ÒÃ
ËÅѧ¨Ò¡·ÕèàÅ×è͹价ÕèàÁ¹ÙËÃ×ÍÃÒ¡Òà ãËé¡´»ØèÁ <Enter> ·Õèá»é¹¾ÔÁ¾ì ËÃ×ʹѺàºÔŤÅÔ¡·ÕèÃÒ¡ÒÃ
• ¡ÒÃÂé͹¡ÅѺä»Âѧ˹éҨ͡è͹˹éÒ
¡´»ØèÁ <Esc> ËÃ×Í <Backspace> ·Õèá»é¹¾ÔÁ¾ì ËÃ×ͤÅÔ¡¢ÇÒ
MUSIC
ÇÔ¸Õ¡ÒÃàÅè¹ä¿Åìà¾Å§ËÃ×ÍÍÍ´ÔâÍ«Õ´ÕÁÕ¡ÒÃ͸ԺÒÂäÇéã¹ÊèǹµèÍ仹Õé
1. àÅ×Í¡àÁ¹Ù MUSIC áÅÐàÅ×Í¡ Category µÑÇÍÂèÒ§àªè¹ àÅ×è͹价Õè All Music
2. ã¹ÇÔ¹â´Çì Library ãËéàÅ×Í¡ä¿Åì´¹µÃÕ·Õè¨ÐàÅè¹
All Music
ä¿Åìà¾Å§ (Music File)
¾×é¹·Õè¡ÅØèÁ (Category Pane)
¾×é¹·ÕèäźÃÒÃÕ (Library Pane)
»ØèÁ Repeat
á·Ãç¤ ·Ø¡á·Ãç¤ ÊØèÁ
»ØèÁ¤Çº¤ØÁ Media Play
»ØèÁ¤Çº¤ØÁ Media Play
¤Ø³ÊÒÁÒöãªé»ØèÁ Media Play Control àÁ×èÍÁÕ¡ÒÃàÅè¹ä¿Åìà¾Å§¹Ñé¹
¡ÒÃãªé¤ÍÁ¾ÔÇàµÍÃì 55
¡ÒÃàÅè¹ËÅÒÂá·Ãç¤
1. ¡ÒÃàÅè¹ä¿Åìà¾Å§
2. àÅ×è͹⿡ÑÊä»Âѧ¾×é¹·Õè¡ÅØèÁ·Ò§«éÒ áÅéÇàÅ×Í¡»ØèÁ Play All
¡ÒÃàÅè¹ÍÍ´ÔâÍ«Õ´Õ
1. ãÊèá¼è¹ÍÍ´ÔâÍ«Õ´Õŧã¹ä´Ã¿ì«Õ´ÕÃÍÁ áÅéÇàÅ×Í¡ CD ¨Ò¡¾×é¹·Õè Category
2. ã¹ÇÔ¹â´Çì Library ãËéàÅ×Í¡ä¿Åì´¹µÃÕ·Õè¨ÐàÅè¹
PHOTO
¢Ñ鹵͹µèÒ§æ à¡ÕèÂǡѺ¡ÒÃàÃÕ¡´ÙÃÙ» (ÀÒ¾) áÅÐÊÓËÃѺ¡ÒÃàÃÕ¡´ÙÃÙ»µèÒ§æ â´ÂãªéÊäÅ´ìâªÇì (Slide Show) ÁÕ¡ÒÃ͸ԺÒÂ
äÇéã¹ÊèǹµèÍ仹Õé
1. àÅ×Í¡àÁ¹Ù PHOTO áÅéÇàÅ×è͹价Õè¡ÅØèÁ All Photo
2. ã¹ÇÔ¹â´Çì Library ãËéàÅ×Í¡ÃÙ»ÀÒ¾·Õèµéͧ¡ÒôÙ
ÀÒ¾·ÕèàÅ×Í¡äÇé¨Ð¶Ù¡«ÙÁ
ÀÒ¾·Ñé§ËÁ´ (All Photo)
¾×é¹·Õè¡ÅØèÁ (Category Pane)
ä¿ÅìÀÒ¾ (Image Files)
¾×é¹·ÕèäźÃÒÃÕ (Library Pane)
»ØèÁ¤Çº¤ØÁ Media Play
⊕ MUSIC
¤Ø³ÊÒÁÒö¿Ñ§ä¿Åìà¾Å§ã¹
My Playlist ËÃ×Í All musics
ä´é¢³Ð·Õè·Ó§Ò¹
¡ÒÃàÃÕ¡´ÙÀÒ¾â´ÂãªéÊäÅ´ìâªÇì (Slide Show) ËÃ×ÍẺàµçÁ˹éÒ¨Í (Full Screen)
ã¹àÁ¹Ù´éÒ¹ÅèÒ§¢Í§ÃÙ»ÀÒ¾·Õè«ÙÁ ãËéàÅ×Í¡ SlideShow ËÃ×Í Full Screen
56 ¤ÙèÁ×ͼÙéãªé
MOVIE
¢Ñ鹵͹¢Í§¡ÒÃàÅè¹ä¿ÅìÇÔ´ÕâÍ (ÀҾ¹µÃì) ËÃ×Íá¼è¹ DVD/VCD ÁÕ¡ÒÃ͸ԺÒÂäÇéã¹ÊèǹµèÍ仹Õé
1. àÅ×Í¡àÁ¹Ù MOVIE áÅéÇàÅ×Í¡¡ÅØèÁ µÑÇÍÂèÒ§àªè¹ ¤Ø³ÊÒÁÒöàÅ×Í¡ All Moviesä´éâ´Â¡ÒÃãªé»ØèÁàÅ×Í¡·ÔÈ·Ò§
2. ã¹ÇÔ¹â´Çì Library ãËéàÅ×Í¡ä¿ÅìÇÔ´ÕâÍ·Õè¨Ðà»Ô´
ÀҾ¹µÃì·ÕèàÅ×Í¡äÇé¨Ð¶Ù¡àÅè¹
ÀҾ¹µÃì·Ñé§ËÁ´ (All Movie)
¾×é¹·Õè¡ÅØèÁ (Category Pane)
ä¿ÅìÀҾ¹µÃì (Movie Files)
¾×é¹·ÕèäźÃÒÃÕ (Library Pane)
»ØèÁ¤Çº¤ØÁ Media Play
⊕ MUSIC
¤Ø³ÊÒÁÒö¿Ñ§ä¿Åìà¾Å§ã¹
My Playlist ËÃ×Í All musics
ä´é¢³Ð·Õè·Ó§Ò¹
¡ÒÃàÅè¹á¼è¹ DVD/VCD
ãÊèá¼è¹ DVD/VCD ŧã¹ä´Ã¿ì DVD-ROM áÅéÇàÅ×Í¡ DVD/VCD ¨Ò¡¾×é¹·Õè Category
ËÅѧ¨Ò¡¹Ñ鹤ÃÙè˹Öè§ á¼è¹ DVD/VCD ¨Ð¶Ù¡àÅè¹
¡ÒÃãªé»ØèÁ¤Çº¤ØÁ¡ÒÃàÅè¹ DVD/VCD
㹡ÒÃãªé»ØèÁ Play Control ¢³Ð·ÕèàÅè¹ÀҾ¹µÃì¨Ò¡ DVD/VCD ãËé¡´»ØèÁËÃ×ÍàÅ×è͹àÁÒÊì
¡ÒÃãªé¤ÍÁ¾ÔÇàµÍÃì 57
¤Óá¹Ð¹Ó
• ¡ÒÃãªéäźÃÒÃÕ (ä¿Åì)
AVStation Now ÊÒÁÒöãªéäźÃÒÃբͧ AVStation Premium ä´é
¡ÒÃãªéäźÃÒÃÕã¹ AVStation Now ãËéÃÕ¨ÔÊàµÍÃìäźÃÒÃÕã¹ AVStation Premium ”¡ÒÃÃÕ¨ÔÊàµÍÃìä¿Åì” ·Õè˹éÒ 49
• ¡ÅØèÁ HDD
¤Ø³ÊÒÁÒöàÅè¹ä¿Åì·ÕèÂѧäÁèä´éÃÕ¨ÔÊàµÍÃìã¹ÎÒÃì´´ÔÊ¡ì㹡ÅØèÁ HDD ¢Í§áµèÅÐàÁ¹Ù
á¨é§ãËé·ÃÒº
• ËéÒÁźâ»Ãá¡ÃÁ Recovery Solution
¡ÒÃź Recovery Solution Program ¨Ðź AVStation Now ´éÇ àÁ×èÍâ»Ãá¡ÃÁ¹Õé¶Ù¡Åº ¤Ø³¨ÐäÁèÊÒÁÒöµÔ´µÑé§ä´éÍÕ¡
´Ñ§¹Ñ鹨֧ËéÒÁźâ»Ãá¡ÃÁ¹Õéà»ç¹Íѹ¢Ò´
• ¤Ø³äÁèÊÒÁÒöãªéà¾ÅÂìÅÔʵì·Õèà¾ÔèÁ¢Öé¹ä´é
¤Ø³äÁèÊÒÁÒöãªéà¾ÅÂìÅÔʵìÍ×è¹æ ¹Í¡¨Ò¡à¾ÅÂìÅÔʵì·ÕèÊÃéÒ§¢Ö鹨ҡ AVStation premium ã¹ AVStation now
• ä¿Åì move ËÃ×Íä¿ÅìÁÙ¿ÇÕèäÁèÊÒÁÒöãªéä´é¡Ñº AVStation Now
¡ÒÃàÅè¹ä¿ÅìÀҾ¹µÃìËÃ×ÍÁÙ¿ÇÕèäÁèÊÒÁÒöãªéä´é¡Ñº AVStation Now ãËéãªé AVStation Premium ËÅѧ¨Ò¡ºÙµ
à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃìáÅéÇ
58 ¤ÙèÁ×ͼÙéãªé
¡ÒÃãªéÈÙ¹Âì¤Çº¤ØÁ¢Í§ Samsung (Samsung Command Center)
ÈÙ¹Âì¤Çº¤ØÁ¢Í§ Samsung à»ç¹â»Ãá¡ÃÁ·ÕèªèÇÂãËé¤Ø³ÊÒÁÒö¨Ñ´¡ÒëͿµìáÇÃì·ÕèÁÕãËéÊÓËÃѺ¤ÍÁ¾ÔÇàµÍÃì Samsung ä´éâ´Â
§èÒ´Ò ¤Ø³ÊÒÁÒö´Ù¤Ó͸ԺÒÂÊÑé¹æ ¢Í§â»Ãá¡ÃÁµèÒ§æ áÅÐÊÒÁÒöàÃÕ¡ãªéâ»Ãá¡ÃÁä´éâ´ÂµÃ§ ÈÙ¹Âì¤Çº¤ØÁ¢Í§ Samsung
¨Ð¶ÙÓ¡«è͹â´ÂÍѵâ¹ÁÑµÔ àÁ×èͤسÇÒ§à¤ÍÃìà«ÍÃì¢Í§àÁÒÊìäÇéã¹µÓá˹觢ÇÒÊØ´
àÅ×Í¡ Start > All Programs > Samsung > Samsung Command Center > Samsung Command Center
˹éҨͧ͢ÈÙ¹Âì¤Çº¤ØÁ¢Í§ Samsung »ÃСͺ´éǾ×é¹·Õè 4 Êèǹ
¹ÒÌÔ¡Ò
¾×é¹·Õè¡ÅØèÁ SW
¾×é¹·ÕèÅÔʵì SW
¾×é¹·Õè AV Station
¾×é¹·Õè Samsung Update Plus
•
•
•
•
¾×é¹·Õè¡ÅØèÁ S/W : ¤Ø³ÊÒÁÒöáºè§â»Ãá¡ÃÁÍÍ¡à»ç¹ 5 ¡ÅØèÁ ä´éá¡è System, Utility, Network, Support áÅÐ
Entertainment áÅÐÊÒÁÒö¨Ñ´¡ÒáѺÃÒ¡ÒõèÒ§æ ä´é
¤Ø³ÊÒÁÒöà¾ÔèÁä¿Åì·ÕèàÃÕ¡ãªéä´éâ´ÂµÃ§¨Ò¡à´Ê¡ì·Í»ËÃ×Í Explorer (ä¿Åì·ÕèÁÕ¹ÒÁÊ¡ØÅà»ç¹ .cmd, .bat, .pif, .scf, .exe,
.com, .lnk ËÃ×Í .scr ) â´ÂÅÒ¡áÅÐÇÒ§ä¿ÅìàËÅèÒ¹Ñé¹
¾×é¹·ÕèÅÔʵì S/W : áÊ´§«Í¿µìáÇÃì·ÕèÃÇÁÍÂÙè㹡ÅØèÁ S/W
¤Ø³ÊÒÁÒöà¾ÔèÁä¿Åì·ÕèÊÒÁÒöàÃÕ¡ãªéâ´ÂµÃ§¨Ò¡à´Ê¡ì·Í»ËÃ×Í Explorer â´ÂÅÒ¡áÅÐÇÒ§ä¿Åì¹Ñé¹æ «Í¿µìáÇÃì
ºÒ§ÍÂèÒ§¢Í§ Samsung ¨Ð¶Ù¡à¾ÔèÁËÃ×͹ÓÍÍ¡¨Ò¡ÅÔʵìâ´ÂÍѵâ¹ÁÑµÔ àÁ×èÍÁÕ¡ÒõԴµÑé§ËÃ×Íź«Í¿µìáÇÃì¹Ñé¹ ËÒ¡¤Ø³àÅ×è͹
à¤ÍÃìà«ÍÃìäÇéà˹×Í«Í¿µìáÇÃìã¹ÅÔÊµì ¤Ø³¨ÐÊÒÁÒö´Ù¤Ó͸ԺÒÂÊÑé¹æ áÅлØèÁ Run à¾×èÍàÃÕ¡ãªéä´é
¾×é¹·Õè AV Station : Êèǹ¹Õé¨Ð»ÃÒ¡¯¢Öé¹à©¾ÒÐàÁ×èÍÁÕ¡ÒõԴµÑé§â»Ãá¡ÃÁ AV Station
¤Ø³ÊÒÁÒöàÃÕ¡ãªéâ»Ãá¡ÃÁàÅè¹ TV, ´¹µÃÕ, ÀҾ¹µÃì ËÃ×ÍÍÑźÑéÁ ¢Í§â»Ãá¡ÃÁ AV Station ÅÒ¡áÅÐÇÒ§ä¿ÅìÊ×èÍ
¨Ò¡à´Ê¡ì·Í»ËÃ×Í Explorer äÇéà˹×Í»ØèÁã´¡çä´é à¾×èÍàÃÕ¡ãªéâ»Ãá¡ÃÁÊÓËÃѺàÅè¹ä¿Åì¹Ñé¹
¾×é¹·Õè Samsung Update Plus : àÁ×èÍÁÕ«Í¿µìáÇÃìËÃ×Íä´ÃàÇÍÃìãËÁè ˹éÒµèÒ§á¨é§¢éÍÁÙŢͧ Samsung Update Plus ¨Ð»ÃÒ¡¯¢Öé¹
ËÒ¡¤Ø³¤ÅÔ¡·Õè˹éÒµèÒ§á¨é§¹Õé â»Ãá¡ÃÁ Samsung update Plus ¨ÐàÃÔèÁµé¹·Ó§Ò¹ áÅÐÁÕ¡ÒÃÍѻവ ¾ÃéÍÁ·Ñé§áÊ´§µÑÇàÅ¢
à»ÍÃìà«ç¹µì¢Í§¤ÇÒÁ¤×ºË¹éÒ
¡ÒÃãªé¤ÍÁ¾ÔÇàµÍÃì 59
¡ÒÃàª×èÍÁµè͡ѺÍÔ¹àµÍÃìà¹çµ
¡ÒÃàª×èÍÁµèÍâ´ÂãªéâÁà´çÁ
¡è͹àÃÔèÁ:
• àµÃÕÂÁÊÒÂâ·ÃÈѾ·ì·ÕèäÁèãªéẺ´Ô¨ÔµÍÅ
• µÔ´µèͼÙéãËéºÃÔ¡ÒÃÍÔ¹àµÍÃìà¹çµ (ISP) à¾×èͤ͢Óá¹Ð¹Ó㹡ÒÃàª×èÍÁµèÍáÅеѴ¡ÒÃàª×èÍÁµèͨҡÍÔ¹àµÍÃìà¹çµ
1. µèÍÊÒÂâ·ÃÈѾ·ìà¢éҡѺ¾ÍÃìµâÁà´çÁ¢Í§¤ÍÁ¾ÔÇàµÍÃì
2. àª×èÍÁµèÍÍÔ¹àµÍÃìà¹çµµÒÁ¤Óá¹Ð¹Ó·Õèä´éÃѺ¨Ò¡ ISP
ËÒ¡¡ÒÃàª×èÍÁµèÍÍÔ¹àµÍÃìà¹çµäÁè¶Ù¡µÑ´ÍÂèÒ§¶Ù¡µéͧ ÍÒ¨·ÓãËé¤Ø³µéͧàÊÕ¤èÒãªé¨èÒ¨ҡ¤èÒâ·Ãà¾ÔèÁ¢Öé¹
60 ¤ÙèÁ×ͼÙéãªé
¡ÒÃàª×èÍÁµèͼèÒ¹Ãкº LAN
1. µèÍÊÒ LAN à¢éҡѺ¾ÍÃìµ LAN ¢Í§¤ÍÁ¾ÔÇàµÍÃì
2. ¤ÅÔ¡ Start > Control Panel
3. ¤ÅÔ¡ Network and Internet Connections ã¹ÇÔ¹â´Çì [Control Panel]
4. ¤ÅÔ¡ Network Connections ã¹ÇÔ¹â´Çì [Network and Internet Connections]
5. ¤ÅÔ¡¢ÇÒ·Õèäͤ͹ Local Area ConnectionáÅéǤÅÔ¡ Properties
¡ÒÃàª×èÍÁµè͡ѺÍÔ¹àµÍÃìà¹çµ 61
6. ã¹á·çº General ãËéàÅ×Í¡ "Internet Protocol(TCP/IP)" ¨Ò¡¹Ñ鹤ÅÔ¡ Properties
7. ¡ÒÃãªé DHCP:
ã¹á·çº General ãËéàÅ×Í¡ "Obtain an IP address automatically" áÅÐ "Obtain DNS server address automatically" ¤ÅÔ¡ OK
¡ÒÃãªé IP µÒµÑÇ:
ã¹á·çº General ãËéàÅ×Í¡ "Use the following IP address" áÅéÇÃкؤèÒ㹿ÔÅ´ì IP address, Subnet mask, Default gateway,
Preferred DNS serve áÅÐ Alternative DNS server ¤ÅÔ¡ OK
¡ÒÃãªé DHCP áÅСÓ˹´ static IP ¾ÃéÍÁ¡Ñ¹:
ã¹á·çº Alternate Configuration ¤ÅÔ¡ User configured áÅéÇ¡ÃÍ¡¢éÍÁÙÅŧ㹿ÔÅ´ì
¤ÅÔ¡ OK
62 ¤ÙèÁ×ͼÙéãªé
¡ÒÃàª×èÍÁµèͼèÒ¹Ãкº Wireless LAN (µÑÇàÅ×Í¡)
ÊÀÒÇСÒ÷ӧҹẺà¹çµàÇÔÃì¡äÃéÊÒ (Wireless LAN) ¤×Íà¹çµàÇÔÃì¡·ÕèÁÕ¡ÒÃÊ×èÍÊÒö֧¡Ñ¹¼èÒ¹à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃìËÅÒÂæ à¤Ã×èͧ
·ÕèºéÒ¹ËÃ×ÍÍÍ¿¿ÔÈ¢¹Ò´àÅç¡â´ÂãªéÍØ»¡Ã³ì wireless LAN
¡ÒÃàª×èÍÁµèͼèÒ¹ wireless network ÃÐËÇèÒ§à¤Ã×èͧ ¤Ø³ÊÒÁÒöãªé¿Ñ§¡ìªÑ¹µèÒ§æ ¢Í§à¹çµàÇÔÃì¡ä´éàªè¹ ¡ÒÃáªÃìä¿Åì â¿Åà´ÍÃìËÃ×Í
à¤Ã×èͧ¾ÔÁ¾ì àÁ×èÍÁÕ¡ÒÃÊÃéÒ§à¹çµàÇÔÃì¡ÃÐËÇèÒ§à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì¢Öé¹áÅéÇ ¤ÍÁ¾ÔÇàµÍÃì·ÕèäÁèä´éàª×èÍÁµè͡ѺÍÔ¹àµÍÃìà¹çµÊÒÁÒöáªÃì
¡ÒÃàª×èÍÁµèÍä´éâ´Âà¢éÒãªé§Ò¹¼èÒ¹à¤Ã×èͧ·ÕèÁÕ¡ÒÃàª×èÍÁµè͡ѺÍÔ¹àµÍÃìà¹çµ ÊÓËÃѺÃÒÂÅÐàÍÕ´ â»Ã´´Ù·Õè
”¡ÒÃãªéÍÔ¹à·ÍÃìà¹çµÃèÇÁ¡Ñ¹” ·Õè˹éÒ 82
¤Ó͸ԺÒÂã¹Êèǹ¹Õé¨Ð¡ÅèÒǶ֧¡ÒÃàª×èÍÁµèÍà¤Ã×Í¢èÒ Intel? PRO/Wireless 2200BG («Ö觵èÍ仹Õé¨ÐàÃÕ¡ÇèÒ¡ÒÃì´ Intel
802.11BG), ¡ÒÃàª×èÍÁµèÍà¤Ã×Í¢èÒ Intel? PRO/ Wireless 2915 («Ö觵èÍ仹Õé¨ÐàÃÕ¡ÇèÒ¡ÒÃì´ Intel 802.11ABG)
áÅÐÍÐá´»àµÍÃìà¤Ã×Í¢èÒÂäÃéÊÒ Atheros Wireless («Ö觵èÍ仹Õé¨ÐàÃÕ¡ÇèÒ¡ÒÃì´ Atheros 802.11BG)
¡ÒÃàÃÕ¡´Ù¡ÒÃì´ wireless LAN ·Õèä´éµÔ´µÑé§äÇéã¹à¤Ã×èͧ ãËé¤ÅÔ¡ Start > Control Panel > Performance and Maintenance
> System > á·çº Hardware > Device Manager
¡ÒÃì´ LAN äÃéÊÒÂà»ç¹ÍØ»¡Ã³ìàÊÃÔÁ ÃØ蹢ͧ¡ÒÃì´ LAN äÃéÊÒ¨ТÖé¹ÍÂÙè¡Ñº¼ÅÔµÀѳ±ì·Õèà¡ÕèÂÇ¢éͧ
¡ÒõÑ駤èÒ¡ÒÃàª×èÍÁµèÍ LAN äÃéÊÒ¨Ð͸ԺÒµÒÁ¡Ã³Õ¢Í§¤ÍÁ¾ÔÇàµÍÃì·ÕèµÔ´µÑé§ Windows XP Service Pack 2
¢Íá¹Ð¹ÓãËéãªé¡ÒõÑ駤èÒ´Õ¿Íŵì¢Í§ Windows XP ÊÓËÃѺ¡ÒõÑ駤èÒ LAN äÃéÊÒ ÊÓËÃѺ¤ÍÁ¾ÔÇàµÍÃì·ÕèµÔ´µÑé§
Windows XP
㹡ÒõÑ駤èÒâ´Âãªé«Í¿µìáÇÃì·ÕèÁÒ¨Ò¡¼Ùé¼ÅÔµ¡ÒÃì´ LAN äÃéÊÒ â»Ã´´Ù·Õè˹éÒ 4-19 '¡ÒÃãªéà¤Ã×Í¢èÒÂäÃéÊÒ¡Ѻ
â»Ãá¡ÃÁ¡ÒõÑ駤èÒ LAN äÃéÊÒÂ' ”¡ÒõԴµÑé§ Wireless Network â´Âãªéâ»Ãá¡ÃÁµÔ´µÑé§ Wireless LAN(ÊÓËÃѺ¡ÒÃì´
Intel 802.11BG ËÃ×Í Intel 802.11ABG)” (¹. 72)
¡ÒÃãªéäÇÃìàÅÊà¹çµàÇÔÃì¡ ¤Ø³µéͧà»Ô´¿Ñ§¡ìªÑ¹ wireless LAN â´Âãªé»ØèÁà»Ô´/»Ô´ Wireless LAN (¹. 8)
¡ÒÃàª×èÍÁµèÍäÇÃìàÅÊà¹çµàÇÔÃì¡ÊÒÁÒöáºè§ÍÍ¡à»ç¹Êͧ¡ÅØèÁãË−èæ
1) Access Point (AP)
¤Ø³ÊÒÁÒöàª×èÍÁµè͡Ѻ AP à¾×èÍãËéÊÒÁÒöãªé§Ò¹à¹çµàÇÔÃì¡ä´é «Ö觨ÐÊÒÁÒö·Óä´é੾ÒÐàÁ×èÍÁÕ¡ÒõԴµÑé§ÍØ»¡Ã³ì AP áÅéÇà·èÒ¹Ñé¹
ÊÓËÃѺÃÒÂÅÐàÍÕ´ â»Ã´´Ù·Õè ”¡ÒÃàª×èÍÁµèÍä»Âѧ Access Point (AP)” ·Õè˹éÒ 64
Access Point (AP) ¤×ÍÍÐäÃ?
AP ¤×ÍÍØ»¡Ã³ìà¹çµàÇÔÃì¡·Õèàª×èÍÁµèÍÃÐËÇèÒ§Ãкº LAN Ẻà´ÔÁáÅÐÃкº wireless LAN áÅеԴµè͡Ѻ wireless hub
ã¹à¹çµàÇÔÃì¡áººà´ÔÁ ¤Ø³ÊÒÁÒöàª×èÍÁµèͤÍÁ¾ÔÇàµÍÃìËÅÒÂæ à¤Ã×èͧ·ÕèÁÕ¡ÒõԴµÑé§ wireless LAN ¼èÒ¹ AP ä´é
¡ÒÃàª×èÍÁµè͡ѺÍÔ¹àµÍÃìà¹çµ 63
2) ¤ÍÁ¾ÔÇàµÍÃìä»Âѧ¤ÍÁ¾ÔÇàµÍÃì (ad hoc)
¡ÒÃàª×èÍÁµèÍẺ¹ÕéàÃÕ¡ÍÕ¡ÍÂèÒ§ÇèÒà¹çµàÇÔÃì¡áºº peer-to-peer
ã¹à¹çµàÇÔÃì¡äÇÃìàÅʢͧ¡ÒÃàª×èÍÁµèÍÃÐËÇèÒ§¤ÍÁ¾ÔÇàµÍÃìä»Âѧ¤ÍÁ¾ÔÇàµÍÃì ¤Ø³ÊÒÁÒöàª×èÍÁµèÍà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì·ÕèÁÕ¡ÒÃ
µÔ´µÑé§ÍØ»¡Ã³ì wireless LAN 2 à¤Ã×èͧËÃ×ÍÁÒ¡¡ÇèÒẺäÃéÊÒÂä´é ÊÓËÃѺÃÒÂÅÐàÍÕ´ â»Ã´´Ù·Õè
“¡ÒÃàª×èÍÁµèÍà¹çµàÇÔÃì¡ÃÐËÇèÒ§¤ÍÁ¾ÔÇàµÍÃìä»Âѧ¤ÍÁ¾ÔÇàµÍÃì (peer-to-peer ËÃ×Í ad hoc)” ·Õè˹éÒ 68
¡ÒÃàª×èÍÁµèÍä»Âѧ Access Point (AP)
Êèǹ¹Õé¨Ð͸ԺÒ¶֧ÇÔ¸Õ¡ÒÃ㹡ÒÃàª×èÍÁµèÍä»Âѧ AP ¤Ø³ÊÒÁÒöãªéà¹çµàÇÔÃì¡ä´éàÁ×èÍÁÕ¡ÒÃàª×èÍÁµè͡Ѻ AP
ÊÓËÃѺÃÒÂÅÐàÍÕ´à¾ÔèÁàµÔÁàªè¹ network key (encryption key) â»Ã´Êͺ¶ÒÁ¼Ùé´ÙáÅÃкºà¹çµàÇÔÃ졢ͧ¤Ø³
1. ¤ÅÔ¡¢ÇÒ·Õèäͤ͹ Wireless Network Connection (
64 ¤ÙèÁ×ͼÙéãªé
) º¹·ÒÊ¡ìºÒÃì áÅéÇàÅ×Í¡ View Available Wireless Networks
2. àÅ×Í¡ AP (àªè¹ Test) à¾×èÍàª×èÍÁµèÍáÅéǤÅÔ¡ Connect
ËÒ¡ÁÕ¡ÒáÓ˹´¤èÒ network key ÊÓËÃѺ AP 㹡ÒÃàª×èÍÁµèÍ ¨Ð»ÃÒ¡¯ÇÔ¹â´Çì Enter Network Key ¢Öé¹
»é͹¤èÒ Network Key ŧã¹ÇÔ¹â´ÇìáÅéǤÅÔ¡»ØèÁ Connect
àÁ×èÍÂѧäÁèÁÕ¡ÒáÓ˹´¤èÒ network key ãËé¡Ñº AP ·ÕèàÅ×Í¡ ¤ÅÔ¡·Õè Link à¾×èÍáÊ´§¡Ãͺ¢éͤÇÒÁàµ×͹ áÅéǤÅÔ¡·Õè
Connect ÍÕ¡¤ÃÑé§
àÁ×èÍ»ÃÒ¡¯¢éͤÇÒÁ Connected ã¹ AP ¤Ø³¨ÐÊÒÁÒöà¢éÒãªé§Ò¹à¹çµàÇÔÃì¡ä´é
¡ÒõÃǨÊͺʶҹСÒÃàª×èÍÁµèÍ
àÅ×è͹àÁÒÊì¾Í¹ìàµÍÃìä»äÇéà˹×Íäͤ͹ Wireless Network Connection (
¨Ð»ÃÒ¡¯Ê¶Ò¹Ð¡ÒÃàª×èÍÁµèÍ¢Öé¹
) ·Õè·ÒÊ¡ìºÒÃì
¡ÒÃàª×èÍÁµè͡ѺÍÔ¹àµÍÃìà¹çµ 65
¡ÒÃàª×èÍÁµèÍà¹çµàÇÔÃì¡ÃÐËÇèÒ§¤ÍÁ¾ÔÇàµÍÃìä»Âѧ¤ÍÁ¾ÔÇàµÍÃì (peer-to-peer ËÃ×Í ad hoc)
ã¹à¹çµàÇÔÃì¡äÇÃìàÅʢͧ¡ÒÃàª×èÍÁµèÍÃÐËÇèÒ§¤ÍÁ¾ÔÇàµÍÃìä»Âѧ¤ÍÁ¾ÔÇàµÍÃì ¤Ø³ÊÒÁÒöàª×èÍÁµèÍà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì·ÕèÁÕ¡ÒÃ
µÔ´µÑé§ÍØ»¡Ã³ì wireless LAN 2 à¤Ã×èͧËÃ×ÍÁÒ¡¡ÇèÒẺäÃéÊÒÂä´é ´éÇ¡ÒÃãªéÇÔ¸Õ¡ÒùÕé ¤ÍÁ¾ÔÇàµÍÃì·ÕèäÁèä´éàª×èÍÁµè͡ѺÍÔ¹àµÍÃìà¹çµ
ÊÒÁÒöáªÃì¡ÒÃàª×èÍÁµèÍä´éâ´Â¡ÒÃà¢éÒãªé§Ò¹¼èÒ¹¤ÍÁ¾ÔÇàµÍÃìà¤Ã×èͧÍ×è¹·ÕèÁÕ¡ÒÃàª×èÍÁµè͡ѺÍÔ¹àµÍÃìà¹çµ (â»Ã´´Ù
”¡ÒÃãªéÍÔ¹à·ÍÃìà¹çµÃèÇÁ¡Ñ¹” ·Õè˹éÒ 82 )
¤Ø³ÊÒÁÒöàª×èÍÁµèÍä´éâ´Â¡Ò÷ӵÒÁ¢Ñ鹵͹µèÍ仹Õé:
• ¢Ñé¹·Õè 1. µÑ駤èÒà¹çµàÇÔÃ졤ÍÁ¾ÔÇàµÍÃìä»Âѧ¤ÍÁ¾ÔÇàµÍÃìãËéà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì
• ¢Ñ¹é ·Õè 2. àª×èÍÁµèÍä»Âѧà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì·Õèä´éÃѺ¡ÒáÓ˹´¤èÒ¨Ò¡à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃìà¤Ã×èͧÍ×è¹æ
¢Ñé¹·Õè 1. µÑ駤èÒà¹çµàÇÔÃ졤ÍÁ¾ÔÇàµÍÃìä»Âѧ¤ÍÁ¾ÔÇàµÍÃì
1. ¤ÅÔ¡¢ÇÒ·Õèäͤ͹ Wireless Network Connection (
66 ¤ÙèÁ×ͼÙéãªé
) ·Õè·ÒÊ¡ìºÒÃì áÅéÇàÅ×Í¡ View Available Wireless Networks
2.
¤ÅÔ¡ Change the order of Preferred Networks
3. ·Õèá·çº Wireless Network ¤ÅÔ¡ Advanced
4. ¡àÅÔ¡¡ÒÃàÅ×Í¡àªç¤ºçÍ¡«ì 'Automatically connect to non-default network' ËÒ¡ÁÕ¡ÒÃàÅ×Í¡àªç¤ºçÍ¡«ì¹ÕéäÇé àÅ×Í¡ 'Computerto-computer (ad hoc) networks only' áÅéǤÅÔ¡ Close
5. ·Õèá·çº Wireless Network ¤ÅÔ¡ Add
¡ÒÃàª×èÍÁµè͡ѺÍÔ¹àµÍÃìà¹çµ 67
6. »é͹ª×èÍà¹çµàÇÔÃì¡ (àªè¹ samsung) áÅéÇ¡àÅÔ¡¡ÒÃàÅ×Í¡ 'The key is provided for me automatically' »é͹ encryption key
㹿ÔÅ´ì Network key áÅéǤÅÔ¡ OK
à¾×èÍ»éͧ¡Ñ¹¡ÒÃàª×èÍÁµè͡Ѻà¹çµàÇÔÃì¡â´Â¼Ùéãªé·ÕèäÁèä´éÃѺ͹Ø−Òµ ¨Ö§¤ÇÃÁÕ¡ÒáÓ˹´ network key (encryption key)
network key »ÃСͺ´éÇÂÍÑ¡¢ÃÐ 5 ¶Ö§ 13 µÑÇ (àªè¹ magic) ËÃ×ÍÃËÑÊ°Ò¹ÊԺˡ 10 ËÃ×Í 26 µÑÇ (áÊ´§â´ÂµÑÇàÅ¢¨Ò¡
'0' ¶Ö§ '9' ËÃ×ÍÍÑ¡Éà 'a' ¶Ö§ 'f')
68 ¤ÙèÁ×ͼÙéãªé
7. µÃǨ´ÙÇèÒª×èÍà¹çµàÇÔÃì¡·Õè¡Ó˹´ (àªè¹ samsung) ÍÂÙèã¹ÃÒ¡Òà ÕPreferred networksÕ áÅéǤÅÔ¡ OK
¡ÒõԴµÑé§ wireless network àÊÃç¨ÊÁºÙóìáÅéÇ
¢Ñé¹·Õè 2. ¡ÒÃàª×èÍÁµè͡Ѻà¤Ã×èͧ·Õèä´éÃѺ¡ÒáÓ˹´¤èÒáÅéÇ
1. ¤ÅÔ¡¢ÇÒ·Õèäͤ͹ Wireless Network Connection (
) ·Õè·ÒÊ¡ìºÒÃì áÅéÇàÅ×Í¡ View Available Wireless Networks
¡ÒÃàª×èÍÁµè͡ѺÍÔ¹àµÍÃìà¹çµ 69
2. àÅ×Í¡ª×èÍ wireless network (àªè¹ samsung) ·ÕèÃкØäÇéã¹ ”¡ÒÃàª×èÍÁµèÍà¹çµàÇÔÃì¡ÃÐËÇèÒ§¤ÍÁ¾ÔÇàµÍÃìä»Âѧ¤ÍÁ¾ÔÇàµÍÃì (peerto-peer ËÃ×Í ad hoc)” ·Õè˹éÒ 66 áÅéǤÅÔ¡ Connect.
3. »é͹ cryptographic key 㹿ÔÅ´ì Network key áÅéǤÅÔ¡ Connect
ËÒ¡ÂѧäÁèÁÕ¡ÒáÓ˹´ network key äÇéã¹ ”¡ÒÃàª×èÍÁµèÍà¹çµàÇÔÃì¡ÃÐËÇèÒ§¤ÍÁ¾ÔÇàµÍÃìä»Âѧ¤ÍÁ¾ÔÇàµÍÃì (peer-topeer ËÃ×Í ad hoc)” ·Õè˹éÒ 66 ãËé¤ÅÔ¡ Connect â´ÂäÁèµéͧ¾ÔÁ¾ì¢éÍÁÙÅÍÐäÃ
àÁ×èÍÁÕ¡ÒÃàª×èÍÁµè͡Ѻ wireless network Ãкº¨ÐáÊ´§¤èÒ Connected ã¹à¹çµàÇÔÃì¡·ÕèàÅ×Í¡¢Í§ÇÔ¹â´Çì Network Connection
70 ¤ÙèÁ×ͼÙéãªé
¡ÒõÃǨÊͺʶҹСÒÃàª×èÍÁµèÍ
àÅ×è͹àÁÒÊì¾Í¹ìàµÍÃìä»äÇéà˹×Íäͤ͹ Wireless Network Connection (
¨Ð»ÃÒ¡¯Ê¶Ò¹Ð¡ÒÃàª×èÍÁµèÍ¢Öé¹
) ·Õè·ÒÊ¡ìºÒÃì
¡ÒÃàª×èÍÁµè͡ѺÍÔ¹àµÍÃìà¹çµ 71
¡ÒõԴµÑé§ Wireless Network â´Âãªéâ»Ãá¡ÃÁµÔ´µÑé§ Wireless LAN(ÊÓËÃѺ¡ÒÃì´ Intel 802.11BG
ËÃ×Í Intel 802.11ABG)
¤Ø³ÊÒÁÒöãªé wireless LAN ä´éâ´Âãªéâ»Ãá¡ÃÁ¡Ó˹´¤èÒ wireless LAN (PROSet) ·ÕèãËéÁÒµèÒ§ËÒ¡
ËÁÒÂà赯 ¤Ó͸ԺÒ¹ÕéãªéÊÓËÃѺ¡ÒÃì´ Intel 802.11BG áÅÐ Intel 802.11ABG ÊÓËÃѺ¡ÒÃì´ Atheros 802.11BG
â»Ã´´Ù·Õè˹éÒ ¹. 75
¡ÒÃãªé¡ÒÃàª×èÍÁµèÍ wireless network ãËé·ÓµÒÁ¢Ñ鹵͹µèÒ§æ ´Ñ§µèÍ仹Õé
• ¢Ñé¹·Õè 1 µÔ´µÑé§â»Ãá¡ÃÁ¡Ó˹´¤èÒ wireless LAN (PROSet)
• ¢Ñ¹é ·Õè 2 ¡Ó˹´¤èҤ͹¿Ô¡ wireless network â´Âãªéâ»Ãá¡ÃÁ¡Ó˹´¤èÒ wireless LAN
¢Ñé¹·Õè 1. ¡ÒõԴµÑé§â»Ãá¡ÃÁ¡Ó˹´¤èÒ wireless LAN (PROSet)
¤Ø³ÊÒÁÒöµÔ´µÑé§â»Ãá¡ÃÁ¨Ñ´¡ÒÃä¤Åà͹µì wireless LAN ä´éµÒÁ¤Óá¹Ð¹Ó·Õè»ÃÒ¡¯¢Öé¹â´ÂÍѵâ¹ÁѵÔàÁ×èͤسãÊèÊ×èÍà¡çº¢éÍÁÙÅ
System Software ã¹ä´Ã¿ì«Õ´ÕÃÍÁ áÅéǵԴµÑé§â»Ãá¡ÃÁ¡Ó˹´¤èÒ wireless LAN
¢Ñé¹·Õè 2. ¡ÒÃãªéâ»Ãá¡ÃÁ¡Ó˹´¤èÒ wireless LAN (PROSet)
´ÑºàºÔŤÅÔ¡·Õèäͤ͹ wireless LAN program ( ) º¹·ÒÊ¡ìºÒÃì
(ËÃ×ͤÅÔ¡ Start > All Programs > Intel PROSet Wireless > Intel PROSet Wireless)
㹺ҧÀÒÉÒ ÍÒ¨äÁèÁÕ¡ÒÃáÊ´§»ØèÁºÒ§»ØèÁã¹ÇÔ¹â´Çì ËÒ¡à»ç¹¡Ã³Õ¹Õé ãËé»ÃѺ¢¹Ò´¢Í§ÇÔ¹â´ÇìãËé¾Í´Õ¡Ñº
â»Ãá¡ÃÁ·Õèãªé
¡Ó˹´¤èҤ͹¿Ô¡¢Í§ wireless network ã¹ PROSet µÒÁ¢Ñ鹵͹µèÍ仹Õé
¡ÒÃàª×èÍÁµè͡Ѻ Access Point:
¡ÒÃàª×èÍÁµè͡Ѻ access point ËÃ×Íà¹çµàÇÔÃ졢ͧ¤ÍÁ¾ÔÇàµÍÃìä»Âѧ¤ÍÁ¾ÔÇàµÍÃì (Ad Hoc) ãËé·ÓµÒÁ¢Ñ鹵͹µèÍ仹Õé (¡ÒÃÊÃéÒ§
à¹çµàÇÔÃì¡ÃÐËÇèÒ§¤ÍÁ¾ÔÇàµÍÃìÊͧà¤Ã×èͧ ãËé·ÓµÒÁ¢Ñ鹵͹ "¡ÒÃÊÃéÒ§à¹çµàÇÔÃì¡ÃÐËÇèÒ§¤ÍÁ¾ÔÇàµÍÃìä»Âѧ¤ÍÁ¾ÔÇàµÍÃì (Ad Hoc) ")
1. ã¹ÃÒ¡Òà Available Networks ãËé¤ÅÔ¡·Õè Refresh
2. àÅ×Í¡ª×èÍ access point ËÃ×Íà¹çµàÇÔÃ졤ÍÁ¾ÔÇàµÍÃìä»Âѧ¤ÍÁ¾ÔÇàµÍÃì·Õèµéͧ¡ÒÃà¾×èÍ·Ó¡ÒÃàª×èÍÁµèͨҡÅÔʵì searched available
networks áÅéǤÅÔ¡ Configure
72 ¤ÙèÁ×ͼÙéãªé
ËÒ¡à¹çµàÇÔÃì¡·Õèµéͧ¡ÒÃäÁè»ÃÒ¡¯¢Öé¹ ãËé¤ÅÔ¡ Refresh
access point ¨Ð¶Ù¡áÊ´§â´Âäͤ͹ ( ) áÅÐ à¹çµàÇÔÃì¡ÃÐËÇèÒ§¤ÍÁ¾ÔÇàµÍÃì¨Ð¶Ù¡áÊ´§â´Âäͤ͹ (
äͤ͹ ( ) ¨Ð¶Ù¡áÊ´§äÇé˹éÒ access point ËÃ×Íà¹çµàÇÔÃì¡ÃÐËÇèÒ§¤ÍÁ¾ÔÇàµÍÃì¾ÃéÍÁ´éÇ¡ÒÃ
¡Ó˹´¤èÒ¡ÒÃÃÑ¡ÉÒ¤ÇÒÁ»ÅÍ´ÀÑÂ
)
3. »é͹¢éÍÁÙÅ Profile Name áÅéǤÅÔ¡ Next
4. ã¹ÇÔ¹â´Çì Search Security Settings ¨Ð»ÃÒ¡¯¢éͤÇÒÁ wireless network security search ¢Öé¹ ¤ÅÔ¡ Next
5. »é͹¤èÒ network authentication, data encryption (WEP), encryption level, key index áÅÐ wireless security
password ¡Ó˹´¤èҤ͹¿Ô¡ãËé¡Ñº access point ·Õèµéͧ¡ÒÃËÃ×Íà¹çµàÇÔÃì¡ÃÐËÇèÒ§¤ÍÁ¾ÔÇàµÍÃìã¹ÇÔ¹â´Çì Security Settings
áÅéǤÅÔ¡ Next
¤èÒ network authentication, data encryption (WEP), key index áÅÐÃËÑʼèÒ¹¢Í§ access point ¨Ðä´éÃѺ¡ÒÃ
¡Ó˹´¤èÒã¹â»Ãá¡ÃÁ¡Ó˹´¤èҢͧ access point ÊÓËÃѺ¢éÍÁÙÅà¡ÕèÂǡѺ¡ÒÃÃÑ¡ÉÒ¤ÇÒÁ»ÅÍ´ÀÑ ãËéµÃǨÊͺ
¡ÒáÓ˹´¤èÒ¡ÒÃÃÑ¡ÉÒ¤ÇÒÁ»ÅÍ´ÀÑ¢ͧ access point ËÃ×ÍÊͺ¶ÒÁ¨Ò¡¼Ùé´ÙáÅÃкºà¹çµàÇÔÃ졢ͧ¤Ø³
¡ÒÃàª×èÍÁµèÍä»Âѧà¹çµàÇÔÃì¡ÃÐËÇèÒ§à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì (Ad Hoc) ãËé»é͹ÃËÑʼèÒ¹·Õèä´éÃѺ¡ÒáÓ˹´äÇéàÁ×èÍÁÕ¡ÒÃ
ÊÃéÒ§à¹çµàÇÔÃ존ѧ¡ÅèÒÇà»ç¹¤ÃÑé§áá â´ÂäÁè¨Óà»ç¹µéͧ»é͹ network authentication ËÃ×Í key index
¡ÒáÓ˹´¤èÒÃÑ¡ÉÒ¤ÇÒÁ»ÅÍ´ÀÑÂ
- ¡ÒõÃǨÊͺÊÔ·¸Ô¡ÒÃãªé§Ò¹à¹çµàÇÔÃì¡: µÑÇàÅ×Í¡ network authentication ¨ÐÃÇÁ¶Ö§ Open System áÅÐ Shared Key
àÁ×èͤسàÅ×Í¡ Open System ¨ÐäÁèÁÕ¡ÒÃãªé¡ÒõÃǨÊͺÊÔ·¸Ô¡ÒÃãªé§Ò¹ (áµèÂѧ¤§ÁÕ¡ÒÃà¢éÒÃËÑÊ¢éÍÁÙÅÍÂÙè)
àÁ×èͤسàÅ×Í¡ Shared Key ¨ÐÁÕ¡ÒÃãªé§Ò¹ WEP key 㹡ÒõÃǨÊͺÊÔ·¸Ô¡ÒÃãªé§Ò¹ ¤èÒ´Õ¿Íŵì¤×Í Open System
- Data encryption (WEP): Áҵðҹ IEEE 802.11 WEP (Wired Equivalent Privacy) ãªéÃкØÃдѺ¡ÒÃà¢éÒÃËÑÊ
ÊͧÃдѺ ¤×Í 64-ºÔµ¤ÕÂì (ºÒ§¤ÃÑé§áÊ´§à»ç¹ 40ºÔµ) áÅÐ 128-ºÔµ¤ÕÂì
- Key index: àÅ×Í¡ encryption key index ·Õèãªéâ´Â access point Íѹã´Íѹ˹Ö觨ҡ¨Ó¹Ç¹ 4 ÃÒ¡ÒÃ
- ¡ÒÃãªé encryption key: ¤ÅÔ¡ Use pass phrase à¾×èÍãªé§Ò¹ áÅéÇ»é͹ÍÑ¡¢ÃÐ 5 µÑÇ (ÊÓËÃѺ 64-ºÔµ) ËÃ×Í 13 µÑÇ
(ÊÓËÃѺ 128-ºÔµ) (áÊ´§â´Â 0-9, a-z ËÃ×Í A-Z)
6. ¨Ð»ÃÒ¡¯ÇÔ¹â´Çì Done ¢Öé¹ ¤ÅÔ¡ OK
àÁ×èÍÁÕ¡ÒÃàª×èÍÁµèÍẺäÇÃìàÅʡѺ access point ¨Ð»ÃÒ¡¯äͤ͹¡ÒÃàª×èÍÁµèÍ (
) ¢Öé¹Ë¹éÒª×èͧ͢â»Ãä¿Åì¡ÒÃàª×èÍÁµè͹Ñé¹
¡ÒÃÊÃéÒ§à¹çµàÇÔÃì¡ÃÐËÇèÒ§¤ÍÁ¾ÔÇàµÍÃì (Ad Hoc) :
¡ÒÃàª×èÍÁµè͡ѺÍÔ¹àµÍÃìà¹çµ 73
¡ÒÃÊÃéÒ§à¹çµàÇÔÃì¡ÃÐËÇèÒ§¤ÍÁ¾ÔÇàµÍÃì (Ad Hoc) ËÃ×Í¡ÒÃàª×èÍÁµè͡Ѻ access point ·Õè«è͹äÇé (Stealth/Closed Mode)
ãËé·ÓµÒÁ¢Ñ鹵͹µèÍ仹Õé
¨Ø´àª×èÍÁµèÍ·Õè«è͹¤×Í access point ·ÕèÁÕÍÂÙè áµèä´éÃѺ¡ÒáÓ˹´¤èҤ͹¿Ô¡ãËéäÁèÊÒÁÒöµÃǨ¾ºä´éâ´Â¡ÒÃÊ᡹
à¾×èÍ»éͧ¡Ñ¹¡ÒþÂÒÂÒÁà¢éÒãªé§Ò¹¨Ò¡¼Ùéãªé·ÕèäÁèä´éÃѺ͹Ø−Òµ
1. ã¹â»Ãä¿Åì ãËé¤ÅÔ¡ Add
2. »é͹¤èÒ Profile Name áÅÐ Network name (SSID) áÅéÇàÅ×Í¡ Operating Mode ¨Ò¡¹Ñ鹤ÅÔ¡·Õè Next
network name (SSID) ¤×ÍÍÐäÃ?
Network name (SSID) ¤×ͪ×èÍ·ÕèÍÐá´»àµÍÃìäÇÃìàÅÊãªé㹡ÒÃÃкءÒÃàª×èÍÁµèÍ »é͹ª×èÍà¹çµàÇÔÃì¡ÃÐËÇèÒ§¤ÍÁ¾ÔÇàµÍÃì
·Õèµéͧ¡ÒÃÊÃéÒ§ (àªè¹ samsung) ËÃ×ͪ×èͧ͢ access point à¾×èÍ·Ó¡ÒÃàª×èÍÁµèÍ ª×èͧ͢à¹çµàÇÔÃì¡·Õè¡Ó˹´ (¾ÔÁ¾ìãË−è
áÅоÔÁ¾ìàÅç¡ÁռŵèÒ§¡Ñ¹) ÊÓËÃѺª×èͧ͢ access point ãËéµÃǨÊͺ¡ÒõÑ駤èҢͧ access point ËÃ×ÍÊͺ¶ÒÁ¨Ò¡
¼Ùé´ÙáÅÃкºà¹çµàÇÔÃ졢ͧ¤Ø³
âËÁ´¡Ò÷ӧҹ:
- Network (Infrastructure) - ¡ÒÃàª×èÍÁµè͡Ѻ Access Point : àÅ×Í¡à¾×èÍàª×èÍÁµè͡Ѻ Access Point:
- Device to device (Ad hoc) - àª×èÍÁµèÍâ´ÂµÃ§¡Ñº¤ÍÁ¾ÔÇàµÍÃìà¤Ã×èͧÍ×è¹æ :
àÅ×Í¡à¾×èÍÊÃéÒ§à¹çµàÇÔÃì¡ÃÐËÇèÒ§¤ÍÁ¾ÔÇàµÍÃì (Ad Hoc) :
3. ¡Ó˹´¤èÒÃËÑʼèÒ¹à¾×èÍãªé¡Ñºà¹çµàÇÔÃì¡ÃÐËÇèÒ§¤ÍÁ¾ÔÇàµÍÃì¡Ñº¤ÍÁ¾ÔÇàµÍÃìã¹ÇÔ¹â´Çì Security Settings
¡ÒÃàª×èÍÁµè͡Ѻ access point ãËé»é͹¤èÒ network authentication, data encryption (WEP), encryption level, key index
áÅÐ wireless security password ·Õèä´éÃѺ¡ÒáÓ˹´¤èÒäÇéã¹ access point
á¹Ð¹ÓãËé¤Ø³¡Ó˹´¤èҤ͹¿Ô¡¡ÒÃà¢éÒÃËÑÊ¢éÍÁÙÅà¾×èÍÃÑ¡ÉÒ¤ÇÒÁ»ÅÍ´ÀÑÂ㹡ÒÃÊÃéÒ§â»Ãä¿Åì¡ÒÃàª×èÍÁµèÍÃÐËÇèÒ§
à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì ÊÓËÃѺÃÒÂÅÐàÍÕ´㹡ÒáÓ˹´¤èÒ¡ÒÃÃÑ¡ÉÒ¤ÇÒÁ»ÅÍ´ÀÑ ãËé´Ù¡ÒáÓ˹´¤èÒ¡ÒÃÃÑ¡ÉÒ¤ÇÒÁ
»ÅÍ´ÀÑÂ㹡ÒÃàª×èÍÁµèÍ AP ËÃ×ͨҡÇÔ¸Õãªé
àÁ×èͤسÊÃéÒ§â»Ãä¿Åì¡ÒÃàª×èÍÁµèͧ͢à¹çµàÇÔÃì¡ÃÐËÇèÒ§à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì ¨ÐäÁèÁÕ¡ÒÃãªé¤èÒ¡ÒõÃǨÊͺÊÔ·¸Ô¡ÒÃ
ãªé§Ò¹à¹çµàÇÔÃì¡ (network authentication setting)
4. ËÅѧ¨Ò¡ÊÃéÒ§â»Ãä¿ÅìáÅéÇ â»Ãä¿ÅìãËÁè¹Õé¨Ð»ÃÒ¡¯¢Öé¹ã¹ÅÔʵìâ»Ãä¿Åì àÅ×Í¡â»Ãä¿Åì·Õèµéͧ¡Òà áÅéǤÅÔ¡ Connect à¾×èÍ
·Ó¡ÒÃàª×èÍÁµèÍä»Âѧâ»Ãä¿Åì·Õèä´éÊÃéÒ§äÇé
àÁ×èÍÁÕ¡ÒÃàª×èÍÁµèÍẺäÇÃìàÅÊä»Âѧâ»Ãä¿Åì·Õèä´éÊÃéÒ§äÇé ¨Ð»ÃÒ¡¯äͤ͹¡ÒÃàª×èÍÁµèÍ (
â»Ãä¿Åì¡ÒÃàª×èÍÁµè͹Ñé¹
74 ¤ÙèÁ×ͼÙéãªé
) ¢Öé¹Ë¹éÒª×èͧ͢
¡ÒõԴµÑé§ Wireless Network â´Âãªéâ»Ãá¡ÃÁµÔ´µÑé§ Wireless LAN (ÊÓËÃѺ¡ÒÃì´ Atheros
802.11BG)
¤Ø³ÊÒÁÒöãªéà¤Ã×Í¢èÒÂäÃéÊÒ â´Âãªéâ»Ãá¡ÃÁµÑ駤èÒ LAN äÃéÊÒ (Atheros Client Utility) ·ÕèÁÕᡵèÒ§ËÒ¡
ËÁÒÂà赯 ¤Ó͸ԺÒ¹ÕéãªéÊÓËÃѺ¡ÒÃì´ Atheros 802.11BG ÊÓËÃѺ¡ÒÃì´ Intel 802.11BG áÅÐ Intel 802.11ABG
â»Ã´´Ù·Õè˹éÒ ¹. 72
㹡ÒÃãªé¡ÒÃàª×èÍÁµèÍà¤Ã×Í¢èÒÂäÃéÊÒ â»Ã´»¯ÔºÑµÔµÒÁ¢Ñ鹵͹µèÍ仹Õé
• ¢Ñ鹵͹·Õè 1. µÔ´µÑé§â»Ãá¡ÃÁ Atheros Client Utility
• ¢Ñ¹é µÍ¹·Õè 2. ÊÃéÒ§à¤Ã×Í¢èÒÂäÃéÊÒÂ
ËÁÒÂàËµØ ã¹¡ÒÃÊÃéÒ§à¤Ã×Í¢èÒÂäÃéÊÒÂÊÓËÃѺÊӹѡ§Ò¹¢¹Ò´àÅç¡ (à¤Ã×èͧµèÍà¤Ã×èͧ) â´ÂÁÕ¤ÍÁ¾ÔÇàµÍÃìÊͧà¤Ã×èͧ
¤Ø³µéͧµÑ駤èÒ¤ÍÁ¾ÔÇàµÍÃì·Ñé§Êͧà¤Ã×èͧãËéµÃ§¡Ñ¹ µÒÁ¢Ñ鹵͹µèÍ仹Õé
¢Ñ鹵͹·Õè 1. ¡ÒõԴµÑé§â»Ãá¡ÃÁ Atheros Client Utility
µÔ´µÑé§â»Ãá¡ÃÁ Atheros Client Utility ·ÕèÁÕãËéã¹á¼è¹«Õ´ÕÃÍÁ System Software ŧ㹤ÍÁ¾ÔÇàµÍÃì·Õè¨Ðàª×èÍÁµè͡Ѻà¤Ã×Í¢èÒÂ
¢Ñ鹵͹·Õè 2. ¡ÒÃãªé Atheros Client Utility
¤ÅÔ¡¢ÇÒ·Õèäͤ͹¢Í§â»Ãá¡ÃÁ LAN äÃéÊÒ ( ) ã¹·ÒÊ¡ìºÒÃì áÅÐàÅ×Í¡ Open Atheros Client Utility
(ËÃ×ÍàÅ×Í¡ Start > All Programs > IEEE 802.11 WIRELESS LAN > Atheros Client Utility)
• 㹡ÒÃàª×èÍÁµè͡Ѻ¨Ø´àª×èÍÁµèÍ
㹡ÒÃàª×èÍÁµè͡Ѻ¨Ø´àª×èÍÁµèÍ ËÃ×Íà¤Ã×Í¢èÒÂẺ¤ÍÁ¾ÔÇàµÍÃìµèͤÍÁ¾ÔÇàµÍÃì·ÕèÁÕÍÂÙèáÅéÇ (Ad Hoc)
â»Ã´´Ù¢Ñ鹵͹µèÍ仹Õé (㹡ÒÃÊÃéÒ§à¤Ã×Í¢èÒÂẺà¤Ã×èͧµèÍà¤Ã×èͧ¢Öé¹ãËÁè
â»Ã´´Ù·ÕèËÑÇ¢éÍ "㹡ÒÃÊÃéÒ§à¤Ã×Í¢èÒÂẺà¤Ã×èͧµèÍà¤Ã×èͧ (Ad Hoc)" ËÅѧ¨Ò¡¹Õé)
1. ã¹á·çº Profile Management ãËé¤ÅÔ¡·Õè Scan to search for available wireless networks
2. ´ÑºàºÔŤÅÔ¡ËÃ×ÍàÅ×Í¡ª×èͧ͢¨Ø´àª×èÍÁµèÍ (ËÃ×Íà¤Ã×Í¢èÒÂẺà¤Ã×èͧµèÍà¤Ã×èͧ·ÕèµÑé§ãËÁè) 㹪èͧ Network Name (SSID)
áÅФÅÔ¡·Õè Enable
ËÁÒÂà赯 ¶éÒà¤Ã×Í¢èÒÂäÁè»ÃÒ¡¯ ãËé¤ÅÔ¡·Õè Refresh
¨Ø´àª×èÍÁµèͨлÃÒ¡¯à»ç¹äͤ͹ ( ) áÅÐà¤Ã×Í¢èÒÂäÃéÊÒÂÊÓËÃѺÊӹѡ§Ò¹¢¹Ò´àÅ硨лÃÒ¡¯à»ç¹äͤ͹
( )
3. »é͹ª×èÍâ»Ãä¿Åì·Õè¨Ðãªéã¹ Network Connections
¡ÒÃàª×èÍÁµè͡ѺÍÔ¹àµÍÃìà¹çµ 75
4. àÅ×Í¡ Security Settings ·Õè¡Ó˹´äÇéÊÓËÃѺ¨Ø´àª×èÍÁµèÍ (ËÃ×Íà¤Ã×Í¢èÒÂẺà¤Ã×èͧµèÍà¤Ã×èͧ) ·Õè¨Ðàª×èÍÁµèÍã¹ÇÔ¹â´Çì Security
¤ÅÔ¡·Õè Settings à¾×èÍ¡Ó˹´µÑÇàÅ×Í¡¡ÒÃÃÑ¡ÉÒ¤ÇÒÁ»ÅÍ´ÀÑÂẺÅÐàÍÕ´ÊÓËÃѺ Security Setting
ËÁÒÂà赯 ¡ÒõÃǨÊͺÊÔ·¸Ôì¢Í§à¤Ã×Í¢èÒ »ÃÐàÀ·¡ÒÃà¢éÒÃËÑÊ
áÅÐÃËÑʼèÒ¹¢Í§¨Ø´àª×èÍÁµèͨСÓ˹´¼èÒ¹â»Ãá¡ÃÁ¨Ñ´¡Òâͧ¨Ø´àª×èÍÁµèÍ ÊÓËÃѺ¢éÍÁÙÅ¡ÒÃÃÑ¡ÉÒ¤ÇÒÁ»ÅÍ´ÀÑÂ
â»Ã´´Ù¡ÒõÑ駤èÒ¡ÒÃÃÑ¡ÉÒ¤ÇÒÁ»ÅÍ´ÀÑ¢ͧ¨Ø´àª×èÍÁµèÍ ËÃ×ͶÒÁ¼Ùé´ÙáÅÃкºà¤Ã×Í¢èÒÂäÃéÊÒÂ
¡ÒõÑ駤èÒ WEP Key:
¡ÒÃà¢éÒÃËÑÊ¢éÍÁÙÅ: Áҵðҹ IEEE 802.11 WEP (Wired Equivalent Privacy) ÁÕÃдѺ¡ÒÃÃÑ¡ÉÒ¤ÇÒÁ»ÅÍ´ÀÑ 2
ÃдѺ: ¡ÒÃà¢éÒÃËÑÊ´éǤÕÂì 64 ºÔµ (ºÒ§¤ÃÑé§à»ç¹ 40 ºÔµ) áÅÐ 128 ºÔµ
»ÃÐàÀ·¢Í§¤ÕÂì»ÃСͺ´éÇÂàÅ¢°Ò¹ÊԺˡáÅÐÍÑ¡¢ÃÐ ASCII
ÊÓËÃѺ ASCII: ¤ÅÔ¡·Õè Use Encryption à¾×èÍãªé¤Ø³ÊÁºÑµÔ¡ÒÃà¢éÒÃËÑÊ
»é͹µÑÇàÅ¢áÅеÑÇÍÑ¡Éà 5 (ÊÓËÃѺ 64 ºÔµ) ËÃ×Í 13 µÑÇ (0-9, a-z ~ A-Z) (ÊÓËÃѺ 128 ºÔµ)
ÊÓËÃѺàÅ¢°Ò¹ÊԺˡ: »é͹ÍÑ¡¢ÃÐàÅ¢°Ò¹ÊԺˡ 10 µÑÇ (ÊÓËÃѺ 64 ºÔµ) ËÃ×Í 26 µÑÇ (0-9, A-F) (ÊÓËÃѺ 128 ºÔµ)
㹿ÔÅ´ì WEP key
ËÁÒÂà赯 à¤Ã×Í¢èÒÂẺà¤Ã×èͧµèÍà¤Ã×èͧ¨ÐÃͧÃѺ੾ÒФÕÂì WEP
¹Í¡¨Ò¡¹Õé ¤Ø³ÊÒÁÒö¡Ó˹´¤ÕÂì 152 ºÔµ (32 µÑÇÍÑ¡ÉÃÊÓËÃѺàÅ¢°Ò¹ÊԺˡ áÅÐ 16 ÊÓËÃѺ ASCII)
㹡ÒÃàª×èÍÁµè͡Ѻ¨Ø´àª×èÍÁµèÍ Atheros
5. ¤ÅÔ¡·Õè»ØèÁ OK áÅФÅÔ¡·Õè»ØèÁ OK ã¹ÇÔ¹â´Çì Profile Management
6. àÁ×èÍÊÃéÒ§â»Ãä¿ÅìãËÁèáÅéÇ â»Ãä¿Åì¹Ñ鹨лÃÒ¡¯ã¹ÅÔʵì¢Í§á·çº Profile Management
áÅСÒÃàª×èÍÁµèÍä»Âѧâ»Ãä¿Åì¹Ñ鹨ÐàÃÔèÁµé¹¢Öé¹
• 㹡ÒÃÊÃéÒ§à¤Ã×Í¢èÒÂẺà¤Ã×èͧµèÍà¤Ã×èͧ (Ad Hoc):
㹡ÒÃÊÃéÒ§à¤Ã×Í¢èÒÂẺà¤Ã×èͧµèÍà¤Ã×èͧ (Ad Hoc) ãËÁè ËÃ×Íàª×èÍÁµè͡Ѻ¨Ø´àª×èÍÁµèÍ·Õè«è͹ÍÂÙè (Stealth/Closed Mode)
ãË黯ԺѵԵÒÁ¢Ñ鹵͹µèÍ仹Õé
ËÁÒÂà赯 ¨Ø´àª×èÍÁµèÍ·Õè«è͹¤×ͨشàª×èÍÁµèÍ·ÕèÁÕÍÂÙè áµèä´éÃѺ¡ÒõÑ駤èÒà¾×èÍ
äÁèãËéÊÒÁÒöÊ᡹¾º à¾×èÍ»éͧ¡Ñ¹¡ÒÃà¢éÒãªé¨Ò¡
¼Ùéãªé·ÕèäÁèä´éÃѺ͹Ø-Òµ
1. ã¹ÇÔ¹â´Çì Profile Management ãËé¤ÅÔ¡·Õè ÊÃéÒ§
2. »é͹ª×èÍâ»Ãä¿Åì㹿ÔÅ´ì Profile Name
3. »é͹ª×èÍà¤Ã×Í¢èÒ·Õè¨Ðàª×èÍÁµèÍ SSID1
76 ¤ÙèÁ×ͼÙéãªé
ËÁÒÂà赯 ª×èÍà¤Ã×Í¢èÒ¤×ÍÍÐäÃ?
ª×èÍà¤Ã×Í¢èÒ¤×ͪ×èÍ·ÕèÍÐá´»àµÍÃìäÃéÊÒÂãªé㹡ÒÃÃÐºØ ¡ÒÃàª×èÍÁµèÍ
»é͹ª×èͧ͢à¤Ã×Í¢èÒÂẺà¤Ã×èͧµèÍà¤Ã×èͧ·Õè¨ÐÊÃéÒ§ (àªè¹ samsung) ËÃ×ͪ×èͧ͢¨Ø´àª×èÍÁµèÍ·Õè¨Ðàª×èÍÁµèÍ´éÇÂ
ª×èÍà¤Ã×Í¢èÒ ÃкصÑǾÔÁ¾ì (µÑǾÔÁ¾ìãË-èáÅеÑǾÔÁ¾ìàÅç¡) ÊÓËÃѺª×èͧ͢¨Ø´àª×èÍÁµèÍ â»Ã´µÃǨÊͺ
¡ÒõÑ駤èҢͧ¨Ø´àª×èÍÁµèÍ ËÃ×ͶÒÁ¼Ùé´ÙáÅÃкºà¤Ã×Í¢èÒÂäÃéÊÒÂ
4. ã¹ÇÔ¹â´Çì Security ãËéàÅ×Í¡ÇèÒÁÕ¡ÒÃãªé¤ÕÂì WEP ¡Ñºà¤Ã×Í¢èÒÂẺà¤Ã×èͧµèÍà¤Ã×èͧ·Õè¨ÐÊÃéÒ§ ËÃ×ÍàÅ×Í¡ Do Not Use
㹡ÒÃàª×èÍÁµè͡Ѻ¨Ø´àª×èÍÁµèÍ ãËéàÅ×Í¡¡ÒõÑ駤èÒ Security Settings ·Õè¡Ó˹´äÇéÊÓËÃѺ¨Ø´àª×èÍÁµèÍ
5. ¡Ó˹´»ÃÐàÀ·à¤Ã×Í¢èÒÂã¹ÇÔ¹â´Çì Advanced
ËÁÒÂà赯 âËÁ´¢Í§à¤Ã×Í¢èÒÂ:
Ad Hoc – àÅ×Í¡µÑÇàÅ×Í¡¹Õéà¾×èÍàª×èÍÁµè͡Ѻà¤Ã×Í¢èÒÂẺà¤Ã×èͧµèÍà¤Ã×èͧ (Ad Hoc)
Infrastructure – àÅ×Í¡µÑÇàÅ×Í¡¹Õéà¾×èÍàª×èÍÁµè͡Ѻ¨Ø´àª×èÍÁµèÍ
6. àÁ×èÍÊÃéÒ§â»Ãä¿ÅìãËÁèáÅéÇ â»Ãä¿Åì¹Ñ鹨лÃÒ¡¯ã¹ÅÔʵì¢Í§á·çº Profile Management
áÅСÒÃàª×èÍÁµèÍä»Âѧâ»Ãä¿Åì¹Ñ鹨ÐàÃÔèÁµé¹¢Öé¹
¡ÒÃàª×èÍÁµè͡ѺÍÔ¹àµÍÃìà¹çµ 77
¡ÒÃãªé Samsung Network Manager
Samsung Network Manager à»ç¹â»Ãá¡ÃÁ·Õèä´éÃѺ¡ÒþѲ¹Òà¾×èÍãËé¼ÙéãªéÊÒÁÒöãªéà¤Ã×Í¢èÒÂä´éâ´Â§èÒÂ
Samsung Network Manager ÁդسÊÁºÑµÔ´Ñ§µèÍ仹Õé
• ¤Ø³ÊÒÁÒöµÑ駤èÒà¤Ã×Í¢èÒÂáÅÐà¤Ã×èͧ¾ÔÁ¾ìä´éâ´Â§èÒÂ
• ¤Ø³ÊÒÁÒöãªéà¤Ã×Í¢èÒÂä´é·Ñ¹·Õ â´ÂäÁèµéͧ¡Ó˹´¤èÒà¤Ã×Í¢èÒÂãËÁèÍÕ¡ àÁ×èÍÁÕ¡ÒÃÂéÒ·ÕèµÑé§
´éÇ¡ÒõÑ駤èÒà¤Ã×Í¢èÒ (IP áÍ´à´ÃÊ ¡ÒõÑ駤èÒà¤Ã×èͧ¾ÔÁ¾ì ÏÅÏ) ÊÓËÃѺáµèÅзÕèµÑé§ ¤Ø³ÊÒÁÒöà¢éÒãªéà¤Ã×Í¢èÒÂä´é·Ñ¹·Õ
â´ÂäÁèµéͧ·ÓµÒÁ¢Ñ鹵͹¡ÒõÑ駤èÒà¤Ã×Í¢èÒ·ء¤ÃÑé§ äÁèÇèÒ¨ÐÍÂÙè·Õèã´
• ¤Ø³ÊÒÁÒöãªéÍÔ¹à·ÍÃìà¹çµÃèÇÁ¡Ñ¹ä´éâ´Â§èÒÂ
¤Ø³ÊÒÁÒöãªéÍÔ¹à·ÍÃìà¹çµÃèÇÁ¡Ñ¹ä´éâ´Â¡Ó˹´¤ÍÁ¾ÔÇàµÍÃìãËéÁÕÍÔ¹àµÍÃìà¿« LAN ªØ´ (ÁÕÊÒÂáÅÐäÃéÊÒ ËÃ×Í LAN
ÁÕÊÒÂÊͧªØ´) à»ç¹à«ÔÃì¿àÇÍÃìÊÓËÃѺ¡ÒÃãªé§Ò¹ÃèÇÁ ¨Ò¡¹Ñé¹ ¤Ø³ÊÒÁÒöà¢éÒãªéÍÔ¹à·ÍÃìà¹çµã¹à¤Ã×èͧä¤Åà͹µì
â´Âàª×èÍÁµèÍà¢éҡѺà«ÔÃì¿àÇÍÃì
• ¤Ø³ÊÒÁÒöÇÔ¹Ô¨©ÑÂʶҹТͧà¤Ã×Í¢èÒÂ
¤Ø³ÊÒÁÒöÇÔ¹Ô¨©ÑÂʶҹТͧà¤Ã×Í¢èÒÂàÁ×èÍà¤Ã×Í¢èÒÂÁÕ¡ÒÃàª×èÍÁµèÍ·ÕèäÁè¶Ù¡µéͧ
¡ÒÃãªéà¤Ã×Í¢èÒÂ
ËÑÇ¢é͹Õé¡ÅèÒǶ֧¢Ñ鹵͹㹡ÒÃàª×èÍÁµèÍà¢éҡѺÍÔ¹à·ÍÃìà¹çµâ´ÂµÑ駤èÒà¤Ã×Í¢èÒ ¢Ñ鹵͹¡ÒõÑ駤èÒ ÃÇÁ¶Ö§¢Ñ鹵͹㹡ÒÃà¾ÔèÁ
à¤Ã×èͧ¾ÔÁ¾ìã¹à¤Ã×Í¢èÒ´éÇÂ
ËÁÒÂà赯 ¢Ñ鹵͹¡ÒõÑ駤èҨеèéÒ§¡Ñ¹ ÊÓËÃѺà¤Ã×Í¢èÒ LAN ª¹Ô´ÁÕÊÒÂáÅЪ¹Ô´äÃéÊÒÂ
㹡ÒÃãªé LAN äÃéÊÒ ¤Ø³¤ÇÃÁÕ AP ¢Í§ LAN äÃéÊÒÂÍÂÙèã¡Åé
¡ÒõÑ駤èÒà¤Ã×Í¢èÒÂ
1. 㹡ÒÃãªé LAN ẺÁÕÊÒ ãËéàª×èÍÁµèÍ ÊÒ LAN à¢éҡѺ ¾ÍÃìµ LAN
㹡ÒÃãªé LAN äÃéÊÒ ãËé¡´»ØèÁ <Fn> áÅÐ <F8> ÃèÇÁ¡Ñ¹à¾×èÍàÃÔèÁãªé§Ò¹ LAN äÃéÊÒ àÁ×èÍ LAN äÃéÊÒ·ӧҹ
ä¿Ê¶Ò¹Ð¡Ò÷ӧҹ¢Í§ LAN äÃéÊÒ ( ) ¨ÐÊÇèÒ§¢Öé¹
2. àÃÕ¡ãªé Samsung Network Manager
àÅ×Í¡ Start > All Programs > Samsung > Samsung Network Manager > Samsung Network Manager
ËÃ×ʹѺàºÔŤÅÔ¡·Õèäͤ͹ Samsung Network Manager ·Õèà´Ê¡ì·Í» ( )
3. ¤ÅÔ¡·Õè»ØèÁ Add
4. àÅ×Í¡äͤ͹µÓá˹觢ͧà¤Ã×Í¢èÒ áÅлé͹ª×èͧ͢µÓá˹觴ѧ¡ÅèÒÇ (àªè¹ Home) ¤ÅÔ¡·Õè»ØèÁ Next
78 ¤ÙèÁ×ͼÙéãªé
5. àÅ×Í¡ Internet direct connection áÅФÅÔ¡·Õè»ØèÁ Next
6. àÅ×Í¡ÍØ»¡Ã³ì LAN µÑ駤èÒ IP áÍ´à´ÃÊ áÅФÅÔ¡·Õè Next
(¢Öé¹) àÅ×Í¡ÍØ»¡Ã³ì
(ŧ) µÑ駤èÒ IP áÍ´à´ÃÊ
ËÁÒÂà赯 àÅ×Í¡ÍØ»¡Ã³ì
àÅ×Í¡ÍØ»¡Ã³ì·Õè¨Ðàª×èÍÁµè͡ѺÍÔ¹à·ÍÃìà¹çµ àÅ×Í¡ Wired LAN (ÁÕÊÒÂ) ËÃ×Í Wireless LAN (äÃéÊÒÂ)
ËÁÒÂà赯 ¡ÒõÑ駤èÒ IP áÍ´à´ÃÊ
㹡ÒèѴÊÃà IP áÍ´à´ÃÊâ´ÂÍѵâ¹ÁÑµÔ (DHCP) ãËéàÅ×Í¡ Get IP Automatically
㹡ÒÃãªé IP áÍ´à´ÃÊ·Õ褧·Õè ãËé¡àÅÔ¡¡ÒÃàÅ×Í¡ Get IP Automatically áÅлé͹ IP áÍ´à´ÃÊ ÊÓËÃѺ¢éÍÁÙÅ
à¡ÕèÂǡѺ IP áÍ´à´ÃÊ â»Ã´¶ÒÁ¼Ùé´ÙáÅÃкº
¡ÒÃàª×èÍÁµè͡ѺÍÔ¹àµÍÃìà¹çµ 79
7. ÇÔ¹â´Çì Setup Printer ¨Ð»ÃÒ¡¯¢Öé¹
㹡ÒÃà¾ÔèÁà¤Ã×èͧ¾ÔÁ¾ì ãËé¤ÅÔ¡·Õè Add Printer â»Ãá¡ÃÁ Add Printer Wizard ¨Ð»ÃÒ¡¯¢Öé¹
µÑ駤èÒà¤Ã×èͧ¾ÔÁ¾ìµÒÁ¤Óá¹Ð¹Óº¹·Õè»ÃÒ¡¯Ë¹éÒ¨Í
àÁ×èÍà¾ÔèÁà¤Ã×èͧ¾ÔÁ¾ìáÅéÇ ãËé¤ÅÔ¡·Õè»ØèÁ Show printer àÅ×Í¡à¤Ã×èͧ¾ÔÁ¾ì·Õèà¾ÔèÁãËÁè áÅФÅÔ¡·Õè Finish
ËÁÒÂà赯 ËÒ¡äÁèµéͧ¡ÒÃà¾ÔèÁà¤Ã×èͧ¾ÔÁ¾ì ãËéàÅ×Í¡ No Default Printer áÅФÅÔ¡·Õè»ØèÁ Finish
ËÁÒÂà赯 àÁ×èÍ¡ÒõÑ駤èÒà¤Ã×Í¢èÒÂàÊÃç¨ÊÁºÙÃ³ì ¢éͤÇÒÁ ‘Do you want to move to newly added location now?’
¨Ð»ÃÒ¡¯¢Öé¹ ËÒ¡¤Ø³àÅ×Í¡ ‘Yes’ ¡ÒõÑ駤èÒà¤Ã×Í¢èÒÂÊÓËÃѺµÓá˹觷Õèà¾ÔèÁ¨ÐÁÕ¼Åãªé§Ò¹
àÁ×èÍ¡ÒõÑ駤èÒà¤Ã×Í¢èÒÂÊÓËÃѺµÓá˹觷Õèà¾ÔèÁÁÕ¼Åãªéè§Ò¹ ʶҹ·Õè«Öè§à¾ÔèÁ¢Öé¹
áÅТéÍÁÙÅ¡ÒÃàª×èÍÁµèͧ͢ʶҹ·Õè´Ñ§¡ÅèÒǨлÃÒ¡¯¢Öé¹ã¹ÇÔ¹â´Çì The detailed Information for
àÁ×èÍ¡ÒõÑ駤èÒà¤Ã×Í¢èÒÂàÊÃç¨ÊÁºÙóì äͤ͹ÊÓËÃѺµÓá˹觷Õèà¾ÔèÁ¢Ö鹨ж١ÊÃéÒ§äÇéã¹ÇÔ¹â´Çì Saved Locations
¤Ø³¨ÐÊÒÁÒöãªéÍÔ¹à·ÍÃìà¹çµ ËÃ×Íà¾ÔèÁµÓá˹è§à¤Ã×Í¢èÒÂãËÁèä´é
àÁ¹Ù
¢éÍÁÙŢͧµÓá˹觻Ѩ¨ØºÑ¹
µÓá˹觷ÕèºÑ¹·Ö¡
ËÁÒÂà赯 ¢Ñ鹵͹¡ÒÃàª×èÍÁµèÍ AP ÊÓËÃѺ LAN äÃéÊÒÂ
㹡ÒÃãªé LAN äÃéÊÒ ãËéàª×èÍÁµè͡Ѻà¢éҡѺ AP ¢Í§ LAN äÃéÊÒ ¨Ò¡¹Ñé¹ ¤Ø³¨ÐÊÒÁÒöà¢éÒãªéà¤Ã×Í¢èÒÂä´é
áÁé㹡óշÕèÁÕ¡ÒÃÂéÒÂà¤Ã×èͧ ËÃ×Íà»ÅÕè¹µÓáË¹è§ ¨Ò¡¹Ñ鹤سÊÒÁÒöà¢éÒãªéà¤Ã×Í¢èÒ áÁéÇèÒ¨ÐÁÕ¡ÒÃàª×èÍÁµè͡Ѻ AP
¢Í§ LAN äÃéÊÒÂÍÂÙè¡çµÒÁ
1. ¤ÅÔ¡¢ÇÒ·Õèäͤ͹ Wireless Network Connection ( ) ·Õè·ÒÊ¡ìºÒÃì áÅФÅÔ¡·Õè View Available Wireless
Networks
2. àÅ×Í¡à¤Ã×Í¢èÒÂäÃéÊÒ·ÕèÁÕ (àªè¹ SAMSUNG) áÅФÅÔ¡·Õè»ØèÁ Connect ÊÓËÃѺ¢éÍÁÙÅà¡ÕèÂǡѺ AP ¢Í§ LAN
äÃéÊÒ·Õèãªéä´é â»Ã´µÔ´µèͼÙé´ÙáÅà¤Ã×Í¢èÒ¢ͧ¤Ø³
80 ¤ÙèÁ×ͼÙéãªé
AP ·Õèãªéä´é
àª×èÍÁµèÍ(áÊ´§ÃÒ¡ÒôéÇÂàÊ鹪Õé)
3. ÇÔ¹â´ÇìÊÓËÃѺ»é͹¤ÕÂìà¤Ã×Í¢èÒè (¤ÕÂì»éͧ¡Ñ¹) ¨Ð»ÃÒ¡¯¢Öé¹
- ËÒ¡ÁÕ¡ÒáÓ˹´¤ÕÂìà¤Ã×Í¢èÒÂäÇéáÅéÇÊÓËÃѺ AP ¢Í§ LAN äÃéÊÒ ãËé»é͹¤ÕÂìà¤Ã×Í¢èÒÂáÅФÅÔ¡·Õè»ØèÁ Connect
ÊÓËÃѺ¢éÍÁÙÅà¡ÕèÂǡѺ¤ÕÂìà¤Ã×Í¢èÒ â»Ã´¶ÒÁ¼Ùé´ÙáÅÃкº
- ËÒ¡äÁèÁÕ¡ÒáÓ˹´¤ÕÂìà¤Ã×Í¢èÒÂäÇéÊÓËÃѺ AP ¢Í§ LAN äÃéÊÒ ãËé¤ÅÔ¡·Õè»ØèÁ Connect
â´ÂäÁèµéͧ»é͹¤ÕÂìà¤Ã×Í¢èÒÂ
4. àÁ×èͤÍÁ¾ÔÇàµÍÃìàª×èÍÁµè͡ѺAP ¢Í§ LAN äÃéÊÒ ¢éͤÇÒÁ Connected ¨Ð»ÃÒ¡¯·Õèäͤ͹ Wireless Network
ã¹·ÒÊ¡ìºÒÃì
¡ÒÃãªéà¤Ã×Í¢èÒÂËÅѧ¨Ò¡ÂéÒµÓá˹è§
´éÇ¡ÒõÑ駤èÒà¤Ã×Í¢èÒ (IP áÍ´à´ÃÊ ¡ÒõÑ駤èÒà¤Ã×èͧ¾ÔÁ¾ì ÏÅÏ) ÊÓËÃѺáµèÅзÕèµÑé§ ¤Ø³ÊÒÁÒöà¢éÒãªéà¤Ã×Í¢èÒÂä´é·Ñ¹·Õ
â´ÂäÁèµéͧ·ÓµÒÁ¢Ñ鹵͹¡ÒõÑ駤èÒà¤Ã×Í¢èÒ·ء¤ÃÑé§ äÁèÇèÒ¨ÐÍÂÙè·Õèã´
1. àÃÕ¡ãªé Samsung Network Manager àÁ×èÍàª×èÍÁµè͡ѺÍÔ¹à·ÍÃìà¹çµ
2. àÅ×Í¡äͤ͹·ÕèáÊ´§¶Ö§µÓá˹觷Õèµéͧ¡ÒèҡÇÔ¹â´Çì Saved Locations ¨Ò¡¹Ñ鹤ÅÔ¡·Õè Move
3. àÁ×èÍ¡ÒõÑ駤èÒà¤Ã×Í¢èÒÂÊÓËÃѺµÓá˹觷Õèà¾ÔèÁÁÕ¼Åãªéè§Ò¹ ʶҹ·Õè«Öè§à¾ÔèÁ¢Öé¹ áÅТéÍÁÙÅ¡ÒÃàª×èÍÁµèÍ
¢Í§Ê¶Ò¹·Õè´Ñ§¡ÅèÒǨлÃÒ¡¯¢Öé¹ã¹ÇÔ¹â´Çì The detailed Information for
¡ÒÃàª×èÍÁµè͡ѺÍÔ¹àµÍÃìà¹çµ 81
¡ÒÃãªéÍÔ¹à·ÍÃìà¹çµÃèÇÁ¡Ñ¹
ËÑÇ¢é͹Õé¡ÅèÒǶ֧¢Ñ鹵͹㹡ÒÃãªéÍÔ¹à·ÍÃìà¹çµÃèÇÁ¡Ñ¹
㹡ÒÃãªéÍÔ¹à·ÍÃìà¹çµÃèÇÁ¡Ñ¹ ¤Ø³µéͧ¡Ó˹´Ãкºà«ÔÃì¿àÇÍÃìáÅÐä¤Åà͹µìÊÓËÃѺ¡ÒÃãªé§Ò¹ÃèÇÁ¡Ñ¹¡è͹ àÁ×è͵Ñ駤èÒàÊÃç¨áÅéÇ
¤Ø³ÊÒÁÒöà¢éÒãªéÍÔ¹à·ÍÃìàµç¹¨Ò¡ä¤Åà͹µìä´é ´éÇ¡ÒÃàª×èÍÁµèÍà¢éҡѺà«ÔÃì¿àÇÍÃì
ËÁÒÂà赯 à«ÔÃì¿àÇÍÃì: ¤ÍÁ¾ÔÇàµÍÃì·ÕèÁÕÍÔ¹àµÍÃìà¿« LAN 2 Êèǹ à¾×èÍ·Ó˹éÒ·Õè㹡ÒÃãªéÍÔ¹à·ÍÃìà¹çµÃèÇÁ¡Ñ¹
ä¤Åà͹µì: ¤ÍÁ¾ÔÇàµÍÃì·ÕèãªéÍÔ¹à·ÍÃìà¹çµ â´Âàª×èÍÁµèÍà¢éҡѺà«ÔÃì¿àÇÍÃì â´ÂäÁèµéͧÁÕ¡ÒÃàª×èÍÁµè͡Ѻ
ÍÔ¹à·ÍÃìà¹çµâ´ÂµÃ§
ËÁÒÂà˵ؤسÊÒÁÒöàª×èÍÁµèÍà«ÔÃì¿àÇÍÃìà¢éҡѺä¤Åà͹µìä´é´Ñ§¹Õé
ä¤Åà͹µì
à«ÔÃì¿ ÇÍÃì
¡ÒÃàª×èÍÁµèÍ 1
¡ÒÃàª×èÍÁµèÍ 2
¡ÒÃàª×èÍÁµèÍ 3
ÍØ»¡Ã³ìÍÔ¹à·ÍÃìà¹çµÀÒ¹͡
LAN ÁÕÊÒÂ
LAN äÃéÊÒÂ
LAN ÁÕÊÒÂ
ÍØ»¡Ã³ì¢Í§ä¤Åà͹µì
LAN äÃéÊÒÂ
LAN ÁÕÊÒÂ
LAN ÁÕÊÒÂ
àª×èÍÁµèÍä¤Åà͹µì·Õèãªé§Ò¹ÃèÇÁ¡Ñ¹
à¢éҡѺÍØ»¡Ã³ì·ÕèàËÁ×͹¡ÑºÍØ»¡Ã³ìÊÓËÃѺä¤Åà
͹µì·ÕèÍÂÙèã¹à«ÔÃì¿àÇÍÃì
㹡ÒÃàª×èÍÁµèÍà«ÔÃì¿àÇÍÃìáÅÐä¤Åà͹µì â´Âãªé LAN ª¹Ô´ÁÕÊÒ ãËéàª×èÍÁµèͤÍÁ¾ÔÇàµÍÃìâ´ÂãªéÊÒ LAN ¡è͹
㹡ÒÃàª×èÍÁµèÍ´éÇ LAN äÃéÊÒ ãËé¡´»ØèÁ <Fn> áÅÐ <F8> ¾ÃéÍÁ¡Ñ¹ à¾×èÍàÃÕ¡ãªé§Ò¹ LAN äÃéÊÒ àÁ×èÍ LAN
äÃéÊÒ·ӧҹ ä¿Ê¶Ò¹Ð¡Ò÷ӧҹ¢Í§ LAN äÃéÊÒ ( ) ¨ÐÊÇèÒ§¢Öé¹
ËÁÒÂà赯 ¤Ø³¨ÐäÁèÊÒÁÒöàª×èÍÁµè͡Ѻà¤Ã×Í¢èÒ ´éÇ¡ÒÃàª×èÍÁµè͡Ѻ LAN AP äÃéÊÒÂâ´ÂµÃ§
àÁ×èÍãªéÍÔ¹àµÍÃìà¹çµÃèÇÁ¡Ñ¹
㹡ÒÃàª×èÍÁµè͡Ѻà¤Ã×Í¢èÒ¢³Ð·Õèàª×èÍÁµè͡Ѻ LAN AP äÃéÊÒ ãËé¡àÅÔ¡¡ÒÃãªéÍÔ¹àµÍÃìà¹çµÃèÇÁ¡Ñ¹¡è͹
¨Ò¡¹Ñé¹ÂéÒÂä»ÂѧµÓá˹觷ÕèÊÒÁÒöàª×èÍÁµè͡ѺÍÔ¹àµÍÃìà¹çµä´éâ´ÂµÃ§
µÑÇÍÂèÒ§àªè¹ ¢Ñ鹵͹¡ÒÃãªéÍÔ¹à·ÍÃìà¹çµÃèÇÁ¡Ñ¹ÊÓËÃѺ [¡ÒÃàª×èÍÁµèÍ 1] «Öè§àª×èÍÁµè͡Ѻà«ÔÃì¿àÇÍÃìáÅÐÍÔ¹à·ÍÃìà¹çµ¼èÒ¹ LAN ÁÕÊÒÂ
áÅÐàª×èÍÁµèÍà«ÔÃì¿àÇÍÃìáÅÐä¤Åà͹µì¼èÒ¹ LAN äÃéÊÒ ´Ñ§¤Ó͸ԺÒµèÍ仹Õé
¡ÒõÑ駤èÒà«ÔÃì¿àÇÍÃì
1. àÃÕ¡ãªé Samsung Network Manager 㹤ÍÁ¾ÔÇàµÍÃì·Õè¨Ðãªéà»ç¹à«ÔÃì¿àÇÍÃì
2. ¤ÅÔ¡·Õè»ØèÁ Add
3. àÅ×Í¡äͤ͹µÓá˹觢ͧà¤Ã×Í¢èÒ áÅлé͹ª×èͧ͢µÓá˹觴ѧ¡ÅèÒÇ (àªè¹ Home) ¤ÅÔ¡·Õè»ØèÁ Next
4. àÅ×Í¡ Internet direct Connection for sharing áÅФÅÔ¡·Õè»ØèÁ Next
82 ¤ÙèÁ×ͼÙéãªé
5. µÑ駤èÒÍØ»¡Ã³ìà¤Ã×Í¢èÒ·Õè¨Ðàª×èÍÁµè͡ѺÍÔ¹à·ÍÃìà¹çµÀÒ¹͡ ¡Ó˹´ÇèÒ¨Ðãªéä¿ÃìÇÍÅËÃ×ÍäÁè
áÅÐàÅ×Í¡ÍØ»¡Ã³ìà¤Ã×Í¢èÒ·Õè¨Ðàª×èÍÁµè͡ѺÍÔ¹à·ÍÃìà¹çµÀÒ¹͡ (àªè¹ LAN ª¹Ô´ÁÕÊÒÂ) ¡Ó˹´ IP áÍ´à´ÃÊ áÅФÅÔ¡·Õè»ØèÁ
Next
¡Ó˹´ÇèÒ¨Ðãªéä¿ÃìÇÍÅËÃ×ÍäÁè
àÅ×Í¡ÍØ»¡Ã³ì
µÑ駤èÒ IP áÍ´à´ÃÊ
- 㹡Òûéͧ¡Ñ¹¡ÒúءÃØ¡¨Ò¡ÀÒ¹͡ ¢Íá¹Ð¹ÓãËéãªéä¿ÃìÇÍÅ
- ÊÓËÃѺ¢éÍÁÙÅà¾ÔèÁàµÔÁà¡ÕèÂǡѺ¡ÒÃàÅ×Í¡ÍØ»¡Ã³ìáÅСÓ˹´ IP áÍ´à´ÃÊ â»Ã´´Ù¤Ó͸ԺÒ¢ͧ¢éÍ 6 ã¹ËÑÇ¢éÍ
”¡ÒõÑ駤èÒà¤Ã×Í¢èÒ” ·Õè˹éÒ 78
6. àÅ×Í¡ÍØ»¡Ã³ìà¤Ã×Í¢èÒ·Õè¨Ðàª×èÍÁµè͡Ѻä¤Åà͹µì (àªè¹ LAN äÃéÊÒÂ) áÅФÅÔ¡·Õè»ØèÁ Next
ËÁÒÂàËµØ ã¹¡ÒÃãªéÍÔ¹à·ÍÃìà¹çµÃèÇÁ¡Ñ¹·Ò§ LAN äÃéÊÒÂ
- 㹿ÔÅ´ì Select Device ãËéàÅ×Í¡ Wireless
- 㹿ÔÅ´ì Wireless Connection Name (àªè¹ Samsung) ãËé»é͹ª×èÍà¤Ã×Í¢èÒÂ
- 㹡ÒÃãªé¤ÕÂìà¤Ã×Í¢èÒ (¤ÕÂì»éͧ¡Ñ¹) ãËéàÅ×Í¡µÑÇàÅ×Í¡ ‘Use Password ,,,’ áÅлé͹¤ÕÂì»éͧ¡Ñ¹
â»Ã´¨´¨Ó¤ÕÂìà¤Ã×Í¢èÒ à¹×èͧ¨Ò¡¤Ø³¨Ðµéͧ»é͹¤ÕÂì¹Õé«éÓ àÁ×èÍãªéä¤Åà͹µìà¾×èÍàª×èÍÁµè͡Ѻà«ÔÃì¿àÇÍÃì
7. ¢éÍÁÙÅ¡ÒõÑ駤èҨлÃÒ¡¯¢Öé¹ Â×¹Âѹ¡ÒõÑ駤èÒ áÅФÅÔ¡·Õè»ØèÁ Next
8. ÇÔ¹â´Çì Setup Printer ¨Ð»ÃÒ¡¯¢Öé¹ àÁ×èÍ Add Printer wizard »ÃÒ¡¯¢Öé¹ ãËé¡Ó˹´¤èÒà¤Ã×èͧ¾ÔÁ¾ìµÒÁ¤Óá¹Ð¹Óº¹Ë¹éÒ¨Í
ÊÓËÃѺ¢éÍÁÙÅâ´ÂÅÐàÍÕ´ â»Ã´´Ù¢éÍ 7 ¢Í§ËÑÇ¢éÍ ”¡ÒõÑ駤èÒà¤Ã×Í¢èÒ” ·Õè˹éÒ 78
¡ÒÃàª×èÍÁµè͡ѺÍÔ¹àµÍÃìà¹çµ 83
9. àÁ×èÍ¡ÒõÑ駤èÒà¤Ã×Í¢èÒÂàÊÃç¨ÊÁºÙóì ãËé¤ÅÔ¡·Õè»ØèÁ Finish
àÁ×èÍ¡ÒõÑ駤èÒà«ÔÃì¿àÇÍÃìàÊÃç¨ÊÁºÙÃ³ì ¤Ø³ÊÒÁÒöµÑ駤èÒä¤Åà͹µì
¡ÒõÑ駤èÒä¤Åà͹µì
1. àÃÕ¡ãªé Samsung Network Manager 㹤ÍÁ¾ÔÇàµÍÃì·Õè¨Ðãªéà»ç¹ä¤Åà͹µì
2. ¤ÅÔ¡·Õè»ØèÁ Add
3. àÅ×Í¡äͤ͹µÓá˹觢ͧà¤Ã×Í¢èÒ áÅлé͹ª×èͧ͢µÓá˹觴ѧ¡ÅèÒÇ ¤ÅÔ¡·Õè»ØèÁ Next
4. àÅ×Í¡ Internet Sharing áÅФÅÔ¡·Õè»ØèÁ Next
- 㹡ÒÃàª×èÍÁµèÍ´éÇ LAN äÃéÊÒ ãËéàÅ×Í¡ Internet Sharing - Wireless
- 㹡ÒÃàª×èÍÁµèÍ´éÇ LAN ª¹Ô´ÁÕÊÒ ãËéàÅ×Í¡ Internet Sharing - Wired
5. Â×¹ÂѹÍØ»¡Ã³ìà¤Ã×Í¢èÒ·Õè¨Ðàª×èÍÁµè͡Ѻà«ÔÃì¿àÇÍÃì áÅФÅÔ¡·Õè»ØèÁ Next
- 㹡ÒÃàª×èÍÁµèͼèÒ¹ LAN äÃéÊÒ ãËé»é͹ wireless connection name (àªè¹ Samsung) ·Õè»é͹ã¹à«ÔÃì¿àÇÍÃì
ËÒ¡¤Ø³¡Ó˹´¤ÕÂìà¤Ã×Í¢èÒÂäÇé (¤ÕÂì»éͧ¡Ñ¹) ÊÓËÃѺà«ÔÃì¿àÇÍÃì ãËé»é͹¤ÕÂìà¤Ã×Í¢èÒÂ
6. ¢éÍÁÙÅ¡ÒõÑ駤èҨлÃÒ¡¯¢Öé¹ Â×¹Âѹ¡ÒõÑ駤èÒ áÅФÅÔ¡·Õè»ØèÁ Next
7. ÇÔ¹â´Çì Printer Setup ¨Ð»ÃÒ¡¯¢Öé¹ àÁ×èÍ Add Printer wizard »ÃÒ¡¯¢Öé¹ ãËé¡Ó˹´¤èÒà¤Ã×èͧ¾ÔÁ¾ìµÒÁ¤Óá¹Ð¹Óº¹Ë¹éÒ¨Í
ÊÓËÃѺ¢éÍÁÙÅâ´ÂÅÐàÍÕ´ â»Ã´´Ù¢éÍ 7 ¢Í§ËÑÇ¢éÍ ”¡ÒõÑ駤èÒà¤Ã×Í¢èÒ” ·Õè˹éÒ 78
8. àÁ×èÍ¡ÒõÑ駤èÒà¤Ã×Í¢èÒÂàÊÃç¨ÊÁºÙóì ãËé¤ÅÔ¡·Õè»ØèÁ Finish
àÁ×èÍ¡ÒõÑ駤èÒä¤Åà͹µìàÊÃç¨ÊÁºÙÃ³ì ¤Ø³ÊÒÁÒöà¢éÒãªéÍÔ¹à·ÍÃìà¹çµã¹à¤Ã×èͧä¤Åà͹µìä´é ¼èÒ¹¿Ñ§¡ìªÑ¹ Internet Sharing
- 㹡ÒÃà¢éÒãªéÍÔ¹à·ÍÃìà¹çµ¨Ò¡à¤Ã×èͧä¤Åà͹µì à¤Ã×èͧà«ÔÃì¿àÇÍÃì¨Ðµéͧà»Ô´ÍÂÙè
- 㹡ÒÃãªéÍÔ¹à·ÍÃìà¹çµ¨Ò¡ä¤Åà͹µì ãËéàÅ×Í¡äͤ͹¢Í§ä¤Åà͹µì¨Ò¡ÇÔ¹â´Çì Location List áÅФÅÔ¡·Õè»ØèÁ Move
- ËÒ¡¢Ò´¡ÒÃàª×èÍÁµèÍ ¢³Ð·ÕèãªéÍÔ¹à·ÍÃìà¹çµã¹ä¤Åà͹µì ãËé¤ÅÔ¡·Õè Ap Active ¨Ò¡àÁ¹Ù Wireless
à¾×èÍàÃÔèÁµé¹¡ÒÃàª×èÍÁµèÍãËÁè
84 ¤ÙèÁ×ͼÙéãªé
¡ÒÃÇÔ¹Ô¨©ÑÂʶҹТͧà¤Ã×Í¢èèÒÂ
¤Ø³ÊÒÁÒöÇÔ¹Ô¨©ÑÂʶҹТͧà¤Ã×Í¢èÒÂàÁ×èÍà¤Ã×Í¢èÒÂÁÕ¡ÒÃàª×èÍÁµèÍ·ÕèäÁè¶Ù¡µéͧ
1. àÃÕ¡ãªé Samsung Network Manager
2. àÅ×Í¡ Auto Diagnosis ¨Ò¡àÁ¹Ù Manage
3. ÇÔ¹â´Çì Network Connections ¨Ð»ÃÒ¡¯¢Öé¹ ¤ÅÔ¡·Õè»ØèÁ Start à¾×èÍàÃÔèÁµé¹¡ÒÃÇÔ¹Ô¨©ÑÂà¤Ã×Í¢èÒÂ
4. àÁ×èÍ¡ÒÃÇÔ¹Ô¨©ÑÂàÊÃç¨ÊÁºÙóì ÍØ»¡Ã³ì·ÕèäÁè·Ó§Ò¹¨ÐÁÕà¤Ã×èͧËÁÒÂÍÑÈà¨ÃÕÂìáÊ´§äÇé ÊÓËÃѺʶҹТͧÍØ»¡Ã³ìâ´ÂÅÐàÍÕ´
â»Ã´ÍèÒ¹¤Ó͸ԺÒ·Õè´éÒ¹ÅèÒ§¢Í§ÇÔ¹â´Çì
ÀÒ¾) ÇÔ¹â´Çì¼ÅÅѾ¸ì¡ÒÃÇÔ¹Ô¨©ÑÂ
àª×èÍÁµèÍãËÁè áÅеÑ駤èÒÍØ»¡Ã³ìµÒÁ¼ÅÅѾ¸ì¢Í§¡ÒÃÇÔ¹Ô¨©ÑÂ
¡ÒÃàª×èÍÁµè͡ѺÍÔ¹àµÍÃìà¹çµ 85
¡ÒÃãªé§Ò¹à¹çµàÇÔÃì¡
ËÅѧ¨Ò¡¤ÍÁ¾ÔÇàµÍÃìä´éàª×èÍÁµè͡Ѻà¹çµàÇÔÃì¡áÅéÇ ¤Ø³ÊÒÁÒöãªéºÃÔ¡ÒõèÒ§æ ¢Í§à¹çµàÇÔÃì¡ä´é àªè¹ ¡ÒÃáªÃìä¿Åì, â¿Åà´ÍÃìáÅÐ
à¤Ã×èͧ¾ÔÁ¾ì
ºÃÔ¡ÒõèÒ§æ ¢Í§à¹çµàÇÔÃ졨ÐÊÒÁÒöãªéä´éâ´Â¤ÍÁ¾ÔÇàµÍÃìµèÒ§æ ·ÕèÁÕ¡ÒÃàª×èÍÁµèÍà¢éҡѺà¹çµàÇÔÃ졹Ñé¹â´Â¡ÒÃ
àª×èÍÁµèͼèÒ¹ÊÒÂËÃ×ÍẺäÃéÊÒ ÊÓËÃѺÃÒÂÅÐàÍÕ´ â»Ã´´Ù ”¡ÒÃàª×èÍÁµèͼèÒ¹Ãкº LAN” ·Õè˹éÒ 61 áÅÐ
â»Ã´´Ù·Õè ”¡ÒÃàª×èÍÁµèͼèÒ¹Ãкº Wireless LAN (µÑÇàÅ×Í¡)” ·Õè˹éÒ 63
¡ÒÃáªÃìä¿ÅìËÃ×Íâ¿Åà´ÍÃì
Êèǹ¹Õé¨Ð͸ԺÒ¶֧ÇÔ¸Õ¡ÒÃ㹡ÒÃáªÃìä¿ÅìáÅÐâ¿Åà´ÍÃìÃÐËÇèÒ§¤ÍÁ¾ÔÇàµÍÃì·ÕèÁÕ¡ÒÃàª×èÍÁµèͶ֧¡Ñ¹ã¹à¹çµàÇÔÃì¡
¡ÒÃáªÃìä¿Åì ãËé·ÓµÒÁ¢Ñ鹵͹µèÒ§æ µèÍ仹Õé:
• ¢Ñé¹·Õè 1. ¡Ó˹´¤èÒãËé¡Ñº¡ÒÃáªÃìä¿ÅìËÃ×Íâ¿Åà´ÍÃìµèÒ§æ ã¹à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì
• ¢Ñ¹é ·Õè 2. à¢éÒãªé§Ò¹ä¿ÅìËÃ×Íâ¿Åà´ÍÃì·ÕèáªÃìäÇé¨Ò¡à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃìà¤Ã×èͧÍ×è¹
àÁ×èÍÁÕ¡ÒÃáªÃìä¿ÅìËÃ×Íâ¿Åà´ÍÃì ¼Ùé·Õèàª×èÍÁµè͡Ѻà¹çµàÇÔÃ졹Ñ鹨ÐÊÒÁÒöà»Ô´áÅÐźä¿ÅìËÃ×Í
â¿Åà´ÍÃì·ÕèÁÕ¡ÒÃáªÃìäÇéä´é
¡ÒáÓ˹´¤èҤ͹¿Ô¡¢Í§¡ÒÃáªÃìä¿Åìã¹à¹çµàÇÔÃì¡ãËé·Ó੾ÒÐàÁ×èÍá¹èã¨ÇèÒà¹çµàÇÔÃì¡»ÅÍ´ÀÑÂà·èÒ¹Ñé¹
áÅÐäÁè¤ÇÃáªÃì¢éÍÁÙÅ·ÕèÊÓ¤Ñ−
86 ¤ÙèÁ×ͼÙéãªé
¢Ñé¹·Õè 1. ¡Ó˹´¤èҤ͹¿Ô¡¢Í§¡ÒÃáªÃì
1. ¤ÅÔ¡¢ÇÒ·Õèä¿ÅìËÃ×Íâ¿Åà´ÍÃì·Õèµéͧ¡ÒÃáªÃìã¹ My Computer áÅéÇàÅ×Í¡Sharing and Security
2. ¤ÅÔ¡ 'IF you understand the security risks but want to share files without running the wizard, click here'
¨ÐÁռŵèÍ¡ÒáÓ˹´¡ÒÃÃÑ¡ÉÒ¤ÇÒÁ»ÅÍ´ÀÑÂàªè¹à´ÕÂǡѺ¡ÒÃãªé 'Network Setup Wizard'
˹éҨ͹Õé¨ÐäÁè»ÃÒ¡¯¢Öé¹ËÒ¡ÁÕ¡ÒõԴµÑé§ Internet Sharing Network Wizard äÇéã¹ÊÀÒÇÇÐáÇ´ÅéÍÁ¡Ò÷ӧҹ
Ẻà¹çµàÇÔÃì¡ÃÐËÇèÒ§à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì
3. àÅ×Í¡ 'Just enable file sharing', áÅéǤÅÔ¡ OK
4. 㹿ÔÅ´ì 'Network sharing and security' ãËéàÅ×Í¡ 'Share this folder on the network' »é͹ª×èÍ¡ÒÃáªÃì áÅéǤÅÔ¡ OK
ÃÐÇѧ㹡ÒÃàÅ×Í¡ 'Allow network users to change my files' à¹×èͧ¨Ò¡¼ÙéãªéÍ×è¹æ ã¹à¹çµàÇÔÃ졨ÐÊÒÁÒöá¡éä¢ä¿ÅìµèÒ§æ
ã¹â¿Åà´ÍÃì·ÕèáªÃìäÇéä´é
¡ÒáÓ˹´¤èҤ͹¿Ô¡¢Í§¡ÒÃáªÃìä¿ÅìáÅÐâ¿Åà´ÍÃìàÊÃç¨ÊÁºÙóìáÅéÇ
¡ÒÃàª×èÍÁµè͡ѺÍÔ¹àµÍÃìà¹çµ 87
¢Ñé¹·Õè 2. ¡ÒÃãªéä¿ÅìËÃ×Íâ¿Åà´ÍÃì·ÕèÁÕ¡ÒÃáªÃì
Êèǹ¹Õé͸ԺÒ¶֧ÇÔ¸Õ¡ÒÃ㹡ÒÃà¢éÒãªé§Ò¹ä¿ÅìËÃ×Íâ¿Åà´ÍÃì·ÕèÁÕ¡ÒÃáªÃìäÇé ËÒ¡¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³à»ç¹ÊÁÒªÔ¡
¢Í§àÇÔÃì¡¡ÃØê»à´ÕÂǡѹ¹Ñé¹
1. ´ÑºàºÔŤÅÔ¡·Õè My Network Places ¢Í§à´Ê¡ì·Í»ã¹µÑÇàÅ×Í¡ Other Places
2. ¤ÅÔ¡ 'View workgroup computers', áÅéǤÅÔ¡àÅ×Í¡à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì·Õèµéͧ¡ÒÃà¢éÒãªé§Ò¹ä¿Åì·ÕèÁÕ¡ÒÃáªÃìäÇé
㹡óշÕè¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³ÍÂÙèã¹àÇÔÃì¡¡ÃØê»Í×è¹:
1. ¤ÅÔ¡·Õè Other Places > Microsoft Windows Network
2. ¤ÅÔ¡ª×èÍàÇÔÃì¡¡ÃØê»·Õèµéͧ¡ÒÃ
3. ¤ÅÔ¡àÅ×Í¡à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì·Õèµéͧ¡ÒÃà¾×èÍáÊ´§ä¿ÅìËÃ×Íâ¿Åà´ÍÃì·ÕèÁÕ¡ÒÃáªÃìäÇé
¡ÒÃáªÃìà¤Ã×èͧ¾ÔÁ¾ì
Êèǹ¹Õé¨Ð͸ԺÒ¶֧ÇÔ¸Õ¡ÒÃ㹡ÒÃáªÃìà¤Ã×èͧ¾ÔÁ¾ìÃÐËÇèÒ§¤ÍÁ¾ÔÇàµÍÃì·ÕèÁÕ¡ÒÃàª×èÍÁµèͶ֧¡Ñ¹ã¹à¹çµàÇÔÃì¡
¡ÒÃáªÃìà¤Ã×èͧ¾ÔÁ¾ì ãËé·ÓµÒÁ¢Ñ鹵͹µèÒ§æ µèÍ仹Õé:
• ¢Ñé¹·Õè 1. ¡Ó˹´¤èҤ͹¿Ô¡¢Í§¡ÒÃáªÃìà¤Ã×èͧ¾ÔÁ¾ì㹤ÍÁ¾ÔÇàµÍÃì·ÕèÁÕ¡ÒÃàª×èÍÁµèÍÍÂÙè¡Ñºà¤Ã×èͧ¾ÔÁ¾ì¹Ñé¹
• ¢Ñ¹é ·Õè 2. à¾ÔèÁáÅÐãªéà¤Ã×èͧ¾ÔÁ¾ì·ÕèÁÕ¡ÒÃáªÃìäÇéã¹à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃìà¤Ã×èͧÍ×è¹ã¹à¹çµàÇÔÃì¡
88 ¤ÙèÁ×ͼÙéãªé
¢Ñé¹·Õè 1. ¡Ó˹´¤èҤ͹¿Ô¡¢Í§¡ÒÃáªÃìà¤Ã×èͧ¾ÔÁ¾ì
1. ã¹à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì·ÕèÁÕ¡ÒÃàª×èÍÁµèÍÍÂÙè¡Ñºà¤Ã×èͧ¾ÔÁ¾ì ãËé¤ÅÔ¡ Start > Printers and Faxes
2. ¤ÅÔ¡¢ÇÒ·Õèà¤Ã×èͧ¾ÔÁ¾ì·Õè¤Ø³µéͧ¡ÒÃáªÃì áÅéǤÅÔ¡ Sharing
3. àÅ×Í¡ 'Share this printer' »é͹ª×èÍÊÓËÃѺà¤Ã×èͧ¾ÔÁ¾ì·ÕèáªÃì áÅéǤÅÔ¡ OK
4. ã¹ÇÔ¹â´Çì Printers and Faxes ¤Ø³¨Ð¾ºäͤ͹¢Í§à¤Ã×èͧ¾ÔÁ¾ìà»ÅÕè¹à»ç¹äͤ͹ẺÍ×è¹·ÕèÁÕÃÙ»Á×Í»ÃÒ¡¯ÍÂÙèá·¹
¢Ñé¹·Õè 2. ¡ÒÃà¾ÔèÁáÅÐãªéà¤Ã×èͧ¾ÔÁ¾ì·ÕèÁÕ¡ÒÃáªÃì
1. ¨Ò¡à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃìà¤Ã×èͧÍ×è¹·Õè¤Ø³µéͧ¡ÒÃãªéà¤Ã×èͧ¾ÔÁ¾ì·ÕèÁÕ¡ÒÃáªÃì ãËé¤ÅÔ¡ Start > Printers and Faxes
2. ¤ÅÔ¡ Add a printer
3. ã¹ Add Printer Wizard ¤ÅÔ¡ Next
4. àÅ×Í¡ 'A network printer, or a printer attached to another computer' ¨Ò¡¹Ñ鹤ÅÔ¡ Next
5. àÅ×Í¡ 'Browse for a printer' áÅéǤÅÔ¡ Next
¡ÒÃàª×èÍÁµè͡ѺÍÔ¹àµÍÃìà¹çµ 89
6. àÅ×Í¡àÇÔÃì¡¡ÃØê»ËÃ×Íà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì àÅ×Í¡à¤Ã×èͧ¾ÔÁ¾ì·Õèµéͧ¡ÒÃãªé áÅéǤÅÔ¡ Next
ËÒ¡¤Ø³äÁ辺à¤Ã×èͧ¾ÔÁ¾ì·Õèµéͧ¡Òà ãËéÅͧãËÁèËÅѧ¨Ò¡àÇé¹ÃÐÂÐÊÑ¡¤ÃÙè
7. ÍèÒ¹¤Óàµ×͹à¡ÕèÂǡѺ¡ÒÃáªÃìà¤Ã×èͧ¾ÔÁ¾ì áÅéǤÅÔ¡ Yes à¾×è͵ԴµÑé§à¤Ã×èͧ¾ÔÁ¾ì·ÕèÁÕ¡ÒÃáªÃì¹Ñé¹
8. àÅ×Í¡ Yes for 'Do you want to use this printer as a default printer?', áÅéǤÅÔ¡ Next
9. ¤ÅÔ¡ Finish
10. ËÅѧ¨Ò¡¡Ó˹´¤èÒ¡ÒÃáªÃìà¤Ã×èͧ¾ÔÁ¾ìàÊÃç¨ÊÁºÙóìáÅéÇ ¨Ð»ÃÒ¡¯à¤Ã×èͧ¾ÔÁ¾ì·ÕèáªÃì¢Öé¹ã¹ÇÔ¹â´Çì Printers and Faxes
µÍ¹¹Õé¤Ø³ÊÒÁÒö¾ÔÁ¾ì§Ò¹â´Âãªéà¤Ã×èͧ¾ÔÁ¾ì·ÕèÁÕ¡ÒÃáªÃìä´éáÁéÇèÒà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³¨ÐäÁèä´éàª×èÍÁµè͡Ѻà¤Ã×èͧ¾ÔÁ¾ì
¹Ñé¹ÍÂÙèâ´ÂµÃ§
90 ¤ÙèÁ×ͼÙéãªé
¡ÒûÃѺáµè§à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³
¡ÒÃãªé¡ÒõÑ駤èÒÃкº
â»Ãá¡ÃÁ¡ÒõÑ駤èÒÃкº (BIOS) ªèÇÂãËé¤Ø³ÊÒÁÒö¡Ó˹´¤èҤ͹¿Ô¡ÎÒÃì´áÇÃì¢Í§à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃìáÅÐ
¡Ó˹´¤èÒ¡ÒÃÃÑ¡ÉÒ¤ÇÒÁ»ÅÍ´ÀÑÂáÅеÑÇàÅ×Í¡¡ÒûÃÐËÂÑ´¾Åѧ§Ò¹ ¡ÒõÑ駤èÒ·Õè¤Ø³àÅ×Í¡¨Ð¶Ù¡ºÑ¹·Ö¡Å§ã¹
˹èǤÇÒÁ¨Ó CMOS ·Õèä´éÃѺ¾Åѧ§Ò¹¨Ò¡áºµàµÍÃÕè ·Õè·Ó˹éÒ·ÕèºÑ¹·Ö¡¢éÍÁÙÅäÇéä´éáÁé¨Ð»Ô´à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃìä»áÅéÇ
¡çµÒÁ àÁ×èÍÁÕ¡ÒÃà»Ô´à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃìÍÕ¡¤ÃÑé§ à¤Ã×èͧ¨Ðä´éÃѺ¡ÒáÓ˹´¤èÒâ´Â¤èÒµèÒ§æ ·Õ辺ã¹Ë¹èǤÇÒÁ¨Ó¹Õé
Ãѹâ»Ãá¡ÃÁ System Setup ËÒ¡¤Ø³ä´é¢éͤÇÒÁá¨é§ãËéÃѹâ»Ãá¡ÃÁ ¤Ø³ÍÒ¨µéͧÃѹ System Setup ´éÇ â´Â੾ÒФÃÑé§áá
·Õè¤Ø³ãªéà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì ¡ÒáÓ˹´ÇѹáÅÐàÇÅÒ ¡ÒÃãªé¡ÒÃÃÑ¡ÉÒ¤ÇÒÁ»ÅÍ´ÀÑÂáÅФسÊÁºÑµÔ¡ÒÃãªé¾Åѧ§Ò¹ ËÃ×Í¡ÒûÃѺ
à»ÅÕ蹤èÒÍ×è¹æ ËÃ×ͤسÊÁºÑµÔÍ×è¹æ
¢éͤÇÃÃÐÇѧà¡ÕèÂǡѺ BIOS:
ËÒ¡¤Ø³äÁèÁÕ¤ÇÒÁÃÙéà¡ÕèÂǡѺ¡ÒõÑ駤èÒ BIOS áÅÐäÁè·ÃÒºÇèÒ¤èÒ¾ÒÃÒÁÔàµÍÃìµèÒ§æ ¤×ÍÍÐäà ãËé¢Í¤ÇÒÁªèÇÂàËÅ×ͨҡ
¼Ùé·ÕèÁÕ¤ÇÒÁÃÙéà¡ÕèÂǡѺàÃ×èͧàËÅèÒ¹Õé ¡ÒõÑ駤èÒäÁè¶Ù¡µéͧÍÒ¨·ÓãËéÃкº·Ó§Ò¹ä´éäÁè¶Ù¡µéͧ ËÃ×Í "Crash" ä´é
â»Ãá¡ÃÁ System Setup àÇÍÃìªÑ¹¢Í§à¤Ã×èͧ¤Ø³ÍÒ¨äÁèÁÕ¿ÔÅ´ì·Ñé§ËÁ´·ÕèáÊ´§äÇé¹ÕéËÃ×ÍÍÒ¨ÁÕ¿ÔÅ´ìÍ×è¹æ à¾ÔèÁàµÔÁä´é
ª×èÍ¿ÔÅ´ìáÅÐÅӴѺ¡ÒûÃÒ¡¯ÍҨᵡµèÒ§¡Ñ¹ä»µÒÁàÇÍÃìªÑ¹¢Í§ BIOS (basic input/output system) ã¹à¤Ã×èͧ
¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³
¡ÒûÃѺáµè§à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³ 91
àÃÔèÁ¡ÒõÑ駤èÒÃкº (System Setup)
¡ÒÃàÃÔèÁ¡ÒõÑ駤èÒÃкº ãËéà»Ô´à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃìáÅéÇ¡´»ØèÁ <F2> ¤éÒ§äÇ騹»ÃÒ¡¯Ë¹éÒ¨Í System Setup ¢Öé¹
Table 2. àÁ¹ÙµèÒ§æ ¢Í§ System Setup
àÁ¹Ù
¿Ñ§¡ìªÑ¹
Main
á¡é䢤èÒ¾×é¹°Ò¹¢Í§Ãкº
Advanced
á¡é䢤سÊÁºÑµÔ·Õè«Ñº«é͹¢Í§à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³
Security
à»Ô´ãªé¤Ø³ÊÁºÑµÔ¡ÒÃÃÑ¡ÉÒ¤ÇÒÁ»ÅÍ´ÀÑ ÃÇÁ·Ñé§ÃËÑʼèÒ¹
ºÙµ
¡Ó˹´ÅӴѺ¡Òúٵ¢Í§ÍػóìµèÒ§æ áÅСÓ˹´¤Ø³ÊÁºÑµÔ㹡Òúٵ
Exit
¡Ó˹´ÇÔ¸Õ¡ÒÃÍÍ¡¨Ò¡â»Ãá¡ÃÁ System Setup
㹡ÒÃà»Ô´àÁ¹Ù·Õè¤Ø³µéͧ¡ÒÃãªé ãËéãªé»ØèÁÅÙ¡ÈëéÒÂËÃ×Í¢ÇÒà¾×èÍàÅ×Í¡ª×èÍàÁ¹Ù
Table 3. »ØèÁ¹ÒÇÔࡪѹ¢Í§â»Ãá¡ÃÁ System Setup
92 ¤ÙèÁ×ͼÙéãªé
»ØèÁ¹ÒÇÔࡪѹ
¿Ñ§¡ìªÑ¹
<F1>
áÊ´§ÇÔ¹â´ÇìÇÔ¸Õãªé·ÑèÇä»
<Esc>
ÍÍ¡¨Ò¡àÁ¹Ù»Ñ¨¨ØºÑ¹
<
> ËÃ×Í <
>
àÅ×è͹à¤ÍÃìà«ÍÃì¢Öé¹áÅÐŧÃÐËÇèÒ§¿ÔÅ´ì
<
> ËÃ×Í <
>
àÅ×Í¡àÁ¹ÙÍ×è¹æ ¡Òá´»ØèÁ <Esc> ·ÕèàÁ¹ÙËÅÑ¡ ¨Ð·ÓãËé¤Ø³ÍÍ¡ÁÒ·ÕèàÁ¹Ù Exit
<F5>
àÅ×è͹¡ÅѺä»ÂѧµÑÇàÅ×Í¡ÊÓËÃѺ¿ÔÅ´ì·ÕèÁÕ¡ÒÃäÎäŵì
<F6>
àÅ×è͹ä»ÂѧµÑÇàÅ×Í¡¶Ñ´ä»ÊÓËÃѺ¿ÔÅ´ì·ÕèÁÕ¡ÒÃäÎäŵì
<F9>
¡Ó˹´¾ÒÃÒÁÔàµÍÃìµèÒ§æ ÊÓËÃѺàÁ¹Ù»Ñ¨¨ØºÑ¹ãËéà»ç¹¤èÒ´Õ¿Íŵì
<F10>
ºÑ¹·Ö¡¡ÒÃà»ÅÕè¹á»Å§áÅÐÍÍ¡¨Ò¡â»Ãá¡ÃÁµÑ駤èÒÃкº
<Enter>
ãªé¤ÓÊÑè§ËÃ×Íà»Ô´àÁ¹ÙÂèÍÂ
¡ÒÃà»ÅÕè¹ÅӴѺ¡Òúٵ
¤Ø³ÊÒÁÒöàÅ×Í¡ÅӴѺ¡Òúٵä´éÇèÒ¨ÐãªéÍØ»¡Ã³ìã´¡è͹ËÅѧ àªè¹ ÎÒÃì´´ÔÊ¡ì «Õ´ÕÃÍÁ ÏÅÏ
µÑÇÍÂèÒ§µèÍ仹Õé͸ԺÒ¶֧ÇÔ¸Õ¡ÒáÓ˹´ ¤èҤ͹¿Ô¡ãËé¡ÑºÎÒÃì´´ÔÊ¡ìà»ç¹ÍØ»¡Ã³ìááÊÓËÃѺ¡Òúٵ
â´Â·Õèà´ÔÁ¡Ó˹´ãËé«Õ´ÕÃÍÁà»ç¹ÍØ»¡Ã³ìáá·ÕèãªéºÙµâ´Â¤èÒ´Õ¿Íŵì
1. àÅ×Í¡àÁ¹Ù Boot ã¹â»Ãá¡ÃÁ System Setup
2. ¡´»ØèÁ <Enter> ·ÕèÃÒ¡Òà Boot Device Priority
3. ãªé»ØèÁ <
> à¾×èÍàÅ×è͹ä»ÂѧÃÒ¡Òà Hard Drive áÅéÇ¡´ <F6> ¨¹¡ÃзÑ觢Öé¹ÁÒÍÂÙè´éÒ¹º¹
4. ¡´»ØèÁ <F10> à¾×èͺѹ·Ö¡¡ÒÃà»ÅÕè¹á»Å§¡ÒõÑ駤èÒ áÅÐÍÍ¡¨Ò¡â»Ãá¡ÃÁ System Setup
¤Ø³ÊÒÁÒöºÙµà¤Ã×èͧä´éâ´ÂãªéÎÒÃì´´ÔÊ¡ìà»ç¹ÍØ»¡Ã³ìµÑÇáá㹡Òúٵä´éáÅéÇ
¡ÒûÃѺáµè§à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³ 93
¡ÒáÓ˹´¤èÒÃËÑʼèÒ¹
¡ÒõÑ駤èÒÃËÑʼèÒ¹¢Í§ Supervisor
´éÇ¡ÒáÓ˹´¤èÒÃËÑʼèÒ¹ ¤Ø³ÊÒÁÒö¨Ó¡Ñ´ÊÔ·¸Ô¡ÒÃà¢éÒãªé§Ò¹ÃкºãËéãªéä´é੾ÒмÙé·ÕèÁÕÊÔ·¸Ôà·èÒ¹Ñé¹
ËéÒÁÅ×ÁËÃ×Í·ÓÃËÑʼèÒ¹ËÒ ËÒ¡¤Ø³Å×ÁÃËÑʼèÒ¹ â»Ã´µÔ´µèÍÈÙ¹ÂìºÃÔ¡Òâͧ Samsung
1. àÅ×Í¡àÁ¹Ù Security ã¹â»Ãá¡ÃÁ System Setup ¡ÒÃà¢éÒÊÙèâ»Ãá¡ÃÁ System Setup â»Ã´´Ù·Õè ”àÃÔèÁ¡ÒõÑ駤èÒÃкº (System
Setup)” ·Õè˹éÒ 92
2. ã¹ÃÒ¡Òà Set Supervisor Password ãËé¡´»ØèÁ <Enter>
3. »é͹ÃËÑʼèÒ¹ ¡´»ØèÁ <Enter> »é͹ÃËÑʼèÒ¹ãËÁèÍÕ¡¤ÃÑé§à¾×èÍÂ×¹Âѹ áÅéÇ¡´ <Enter> ÍÕ¡¤ÃÑé§
4. àÁ×èÍÁÕ¢éͤÇÒÁÂ×¹Âѹ¡ÒáÓ˹´ÃËÑʼèÒ¹»ÃÒ¡¯¢Öé¹ã¹ÇÔ¹â´Çì [Setup Notice] ãËé¡´ <Enter>
¡ÒõÑ駤èÒÃËÑʼèÒ¹¢Í§ User
¤Ø³ÊÒÁÒö¡Ó˹´¤èÒÃËÑʼèÒ¹¢Í§ÂÙÊà«ÍÃìä´éà¾×èÍãËé¼ÙéãªéÍ×è¹æ ÊÒÁÒöà¢éÒãªéÃкºä´é
¡è͹¡Ó˹´ÃËÑʼèÒ¹ÊÓËÃѺ¼Ùéãªé µéͧ·Ó¡ÒáÓ˹´ÃËÑʼèÒ¹ÊÓËÃѺ¼Ùé´ÙáÅÃкºàÊÕ¡è͹
¼ÙéãªéÊÒÁÒöà»Ô´à¤Ã×èͧä´éâ´ÂãªéÃËÑʼèÒ¹¢Í§µ¹àͧ áµè¨ÐäÁèÊÒÁÒöà¢éÒãªé§Ò¹â»Ãá¡ÃÁ System Setup ä´é
¡ÒáàÅÔ¡¡ÒÃãªé§Ò¹ÃËÑʼèÒ¹¢Í§¼Ùé´ÙáÅÃкº¨ÐËÁÒ¶֧¡ÒáàÅÔ¡¡ÒÃãªéÃËÑʼèÒ¹¢Í§¼Ùéãªéä»´éÇÂ
ã¹ÃÒ¡Òà Set User Password ¡´»ØèÁ <Enter> áÅéÇ·ÓµÒÁ¢Ñ鹵͹·Õè 3-4 ¢Í§ËÑÇ¢éÍ "¡ÒáÓ˹´ÃËÑʼèÒ¹ÊÓËÃѺ Supervisor"
94 ¤ÙèÁ×ͼÙéãªé
¡ÒÃãªé§Ò¹ÃËÑʼèҹ㹡Òúٵ
¡è͹¡Ó˹´ÃËÑʼèÒ¹ÊÓËÃѺ¡Òúٵ µéͧ·Ó¡ÒáÓ˹´ÃËÑʼèÒ¹ÊÓËÃѺ¼Ùé´ÙáÅÃкºàÊÕ¡è͹
¡Ó˹´ãËé¤èÒµÑÇàÅ×Í¡ Password on boot à»ç¹ [Enabled]
¨Ò¡¹Õéä» ¨ÐäÁèÊÒÁÒöºÙµà¤Ã×èͧä´éËÒ¡äÁèãÊèÃËÑʼèÒ¹·Õè¶Ù¡µéͧ
¡ÒáàÅÔ¡¡ÒÃãªéÃËÑʼèÒ¹
1. ä»·ÕèÃËÑʼèÒ¹·Õèµéͧ¡ÒÃź áÅéÇ¡´ <Enter> (àªè¹ ÃËÑʼèÒ¹ÊÓËÃѺ¼Ùé´ÙáÅÃкº)
2. »é͹ÃËÑʼèÒ¹à´ÔÁ·Õè¡Ó˹´äÇé áÅéÇ¡´ <Enter>
3. äÁèµéͧ¾ÔÁ¾ì¢éÍÁÙÅã´æ ŧ㹿ÔÅ´ì 'Enter New Password' áÅÐ 'Confirm New Password' áÅéÇ¡´»ØèÁ <Enter>
à¾×èÍ¡àÅÔ¡¡ÒÃãªéÃËÑʼèÒ¹¹Ñé¹
¡ÒûÃѺáµè§à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³ 95
¡ÒáÓ˹´¤èҤ͹¿Ô¡¤ÇÒÁÅÐàÍÕ´áÅÐÃдѺÊÕ
¤ÇÒÁÅÐàÍÕ´¢Í§Ë¹éÒ¨Í ¤×ͨӹǹ¾Ô¡à«Å·ÕèáÊ´§º¹Ë¹éÒ¨Í ¡ÒÃãªé¤ÇÒÁÅÐàÍÕ´ÊÙ§¨Ð·ÓãËé˹éҨͷÑé§ËÁ´¡ÇéÒ§¢Öé¹
áÁéÇèÒáµèÅÐÃÒ¡ÒèдÙÁÕ¢¹Ò´àÅç¡Å§¡çµÒÁ ¤Ø³ÀÒ¾¢Í§ÊÕ ¡Ó˹´â´Â¨Ó¹Ç¹ºÔµ·Õèãªéà¾×èÍáÊ´§áµèÅоԡà«Åº¹Ë¹éÒ¨Í
¤Ø³ÀÒ¾ÊÕ·ÕèÊÙ§¢Ö鹨ÐáÊ´§¨Ó¹Ç¹ÊÕä´éÁÒ¡¢Ö鹺¹Ë¹éÒ¨Í
1. àÅ×Í¡ Start > Control Panel > Appearance and Themes > Change the screen resolution
2. á¡é䢤èÒã¹á·çº Settings ¢Í§ä´ÍÐÅçÍ¡ºçÍ¡«ì [Display Properties]
¤Ø³ÊÒÁÒöàÃÕ¡´ÙªÔ»à«çµ¡ÃÒ¿Ô¡ä´é
¡ÒÃà»ÅÕ蹤ÇÒÁÅÐàÍÕ´¢Í§
˹éÒ¨Í ãËé»ÃѺᶺàÅ×è͹ä»Âѧ
¤ÇÒÁÅÐàÍÕ´·ÕèàËÁÒÐÊÁ
¡ÒÃà»ÅÕ蹨ӹǹÊÕ·Õè»ÃÒ¡¯
º¹Ë¹éÒ¨Í ãËéàÅ×Í¡¤Ø³ÀÒ¾¢Í§ÊÕ
·ÕèàËÁÒÐÊÁ
ËÁÒÂà赯 ªÔ»à«çµ¡ÃÒ¿Ô¡
Ãкº¹ÕéÁÕªÔ»à«çµ¡ÃÒ¿Ô¡ ATI ËÃ×Í Intel µÔ´µÑé§ÍÂÙè
¤Ø³ÊÒÁÒö´ÙªÔ»à«çµ¡ÃÒ¿Ô¡·ÕèµÔ´µÑé§ä´éã¹ÇÔ¹â´Çì Display Properties
- ªÔ»à«çµ¡ÃÒ¿Ô¡ ATI: ªÔ»à«çµ ATI MOBILITY RADEON X300/X600/X700
- ªÔ»à«çµ¡ÃÒ¿Ô¡ Intel: ªÔ»à«çµ Mobile Intel(R) 915GM ËÃ×ͪԻà«çµ Mobile Intel(R) 910GML
96 ¤ÙèÁ×ͼÙéãªé
3. ËÅѧ¨Ò¡¡Ó˹´¤èÒµèÒ§æ áÅéÇ ãËé¤ÅÔ¡ Apply
ÊÓËÃѺÃØè¹ WXGA ¤ÇÒÁ¡ÇéÒ§ 15.4” á¹Ð¹ÓãËé¡Ó˹´¤èҤ͹¿Ô¡¤ÇÒÁÅÐàÍÕ´¢Í§¨ÍãËéà»ç¹
1280x800 áÅФسÀÒ¾ÊÕà»ç¹ Highest (32 bit)
ÊÓËÃѺÃØè¹ WSXGA+ ¤ÇÒÁ¡ÇéÒ§ 15.4” á¹Ð¹ÓãËé¡Ó˹´¤èҤ͹¿Ô¡¤ÇÒÁÅÐàÍÕ´¢Í§¨ÍãËéà»ç¹
1680x1050 áÅФسÀÒ¾ÊÕà»ç¹ Highest (32 bit)
¡ÒûÃѺáµè§à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³ 97
¡ÒÃãªéÍØ»¡Ã³ìáÊ´§¼ÅÀÒ¹͡ (ÃØè¹·ÕèãªéªÔ»à«çµ ATI (¹. 96))
¡ÒÃãªéÍØ»¡Ã³ìáÊ´§¼ÅÀÒ¹͡ àªè¹ ¨ÍáÊ´§¼Å, â»ÃਡàµÍÃì, â·Ã·Ñȹì ÏÅÏ ªèÇÂãËé¤Ø³ÊÒÁÒö´ÙÀÒ¾º¹¨Íä´éº¹
ÍØ»¡Ã³ìÍ×è¹ËÃ×ÍáÊ´§¼Å¾ÃéÍÁ¡Ñ¹·Ñé§Êͧ¨Íä´é ¹Í¡¨Ò¡¹Õé ¤Ø³ÂѧÊÒÁÒöáÊ´§Ë¹éÒ¨Í㹨ÍÊͧ¨ÍµèÍà¹×èͧ¡Ñ¹ à¾×èÍ
à¾ÔèÁ¾×é¹·Õè㹡ÒÃáÊ´§¼Åä´éÍÕ¡´éÇ ¡ÒÃãªéÍØ»¡Ã³ìáÊ´§¼ÅÀÒ¹͡ÁÕ»ÃÐ⪹ìâ´Â੾ÒÐàÁ×èͤس·Ó¡ÒùÓàÊ¹Í ËÃ×ͪÁ
ÀҾ¹µÃì·Ò§â·Ã·Ñȹì
¡ÒÃÊÅѺÍØ»¡Ã³ìáÊ´§¼Åâ´Âãªéªç͵¤Ñ·
¤Ø³ÊÒÁÒöáÊ´§¼Å·Ò§¨Í LCD ËÃ×ÍÍØ»¡Ã³ìáÊ´§¼ÅÀÒ¹͡ ËÃ×ÍÍÒ¨áÊ´§¼Å·Ñ駺¹¨Í LCD áÅÐÍØ»¡Ã³ìáÊ´§¼ÅÀÒ¹͡
¾ÃéÍÁæ ¡Ñ¹
1. µèÍÍØ»¡Ã³ìáÊ´§¼ÅÀÒ¹͡ (àªè¹ ¨ÍáÊ´§¼ÅËÃ×Íâ»ÃਡàµÍÃì) à¢éҡѺ¾ÍÃ쵢ͧà¤Ã×èͧ 㹡ÒÃàª×èÍÁµèÍâ·Ã·Ñȹì
ãËéµèÍà¢éҡѺ¾ÍÃìµ TV output ¢Í§à¤Ã×èͧ
¡ÒÃàª×èÍÁµèÍâ·Ã·Ñȹì
¡ÒõèÍâ·Ã·Ñȹì ãËéµè͡Ѻ¾ÍÃìµ TV-Out ¢Í§à¤Ã×èͧáÅоÍÃìµ S-Video ¢Í§â·Ã·Ñȹì·ÕèÁÕà¤àºÔÅ S-Video
(äÁèÁÕÊÒÂà¤àºÔŹÕéãËéÁÒ´éÇ áÅеéͧ«×éÍᡵèÒ§ËÒ¡)
àª×èÍÁµè͡Ѻ DTV
¡ÒÃàª×èÍÁµè͡Ѻ DTV ãËéµè͡Ѻ¾ÍÃìµ TV-Out ¢Í§à¤Ã×èͧáÅоÍÃìµ Component ¢Í§ TV output â´ÂãªéÊÒÂà¤àºÔÅ
Dongle áÅÐà¤àºÔÅ Component (ÊÒÂà¤àºÔÅ Dongle äÁèä´éÁÕãËéÁÒ´éÇÂáÅеéͧá¡«×é͵èÒ§ËÒ¡)
µèÍÊÒÂà¤àºÔÅ Dongle à¢éҡѺ¾ÍÃìµ TV-Out ¢Í§à¤Ã×èͧáÅÐà¤àºÔÅ Component
à¤àºÔÅ Dongle - à¤àºÔÅ Dongle äÁèä´éÁÕãËéÁÒ
´éÇÂáÅеéͧ«×éÍà¾ÔèÁÀÒÂËÅѧ
¤Ø³µéͧàª×èÍÁµèÍà¤àºÔÅáÅÐà»ÅÕ蹡ÒõÑ駤èҴѧµèÍ仹Õé
1. ¤ÅÔ¡ Start > Control Panel > Appearance and Themes > Display
2. ¤ÅÔ¡á·çº Settings> Advanced
3. ¤ÅÔ¡á·çº the Display
98 ¤ÙèÁ×ͼÙéãªé
4. àÅ×Í¡ YPbPr On/Off
YPbPr On/Off
YPbPr
5. ¤ÅÔ¡ Apply
6. ÇÔ¹â´ÇìÂ×¹Âѹ¨Ð»ÃÒ¡¯¢Öé¹ ¤ÅÔ¡·Õè»ØèÁ Yes
7. ¤ÅÔ¡ YPbPr
8. àÅ×Í¡»ÃÐàÀ· TV ·ÕèàËÁÒÐÊÁã¹ÇÔ¹â´Çì YPbPr Properties áÅéǤÅÔ¡ Apply
2. ¡´»ØèÁ <Fn>+<F4/
> àÁ×èÍÁÕ¡ÒÃàª×èÍÁµèÍÍØ»¡Ã³ìáÊ´§¼ÅÀÒ¹͡ µÑÇàÅ×Í¡¡ÒÃáÊ´§¼Å¨Ðà»ÅÕè¹µÒÁÅӴѺ
LCD > CRT > LCD+CRT àÁ×èÍÁÕ¡Òá´»ØèÁ<Fn>+<F4/
>
㹡óշÕèÁÕÍØ»¡Ã³ìáÊ´§¼ÅÀÒ¹͡ËÅÒª¹Ô´µèÍÍÂÙè ÅӴѺ¢Í§¡ÒÃáÊ´§¼Å¨Ðà»ç¹´Ñ§¹Õé
LCD > CRT > TV > LCD+CRT > LCD+TV > LCD àÁ×èÍ¡´»ØèÁ <Fn>+<F4 /
>
ã¹ÊÀÒÇСÒ÷ӧҹ¢Í§ DOS ˹éҨͨÐàÍÒµì¾Øµä»Âѧ LCD áÅÐ CRT µÒÁÅӴѺ äÁèÊÒÁÒöãªé¿Ñ§¡ìªÑ¹ TV ä´é
ã¹âËÁ´àµçÁ˹éҨͧ͢ DOS mode ã¹ Windows ¤Ø³äÁèÊÒÁÒöãªé»ØèÁÅÑ´ä´é
¡ÒûÃѺáµè§à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³ 99
¡ÒÃãªé Dual View à¾×èÍ´Ù¨ÍÀҾẺ¢ÂÒÂ
¤Ø³ÊÒÁÒö¢ÂÒÂ˹éÒ¨Íà»ç¹Êͧ˹éÒ¨Íä´éáÅзӧҹä´éÊдǡà¹×èͧ¨Ò¡¡ÒÃÁÕ¾×é¹·Õè·Ó§Ò¹·Õèᡨҡ¡Ñ¹
ã¹âËÁ´ Dual View ¤Ø³ÊÒÁÒöàÅ×Í¡¤ÇÒÁÅÐàÍÕ´¢Í§Ë¹éÒ¨ÍáÅФسÀÒ¾¢Í§ÊÕÊÓËÃѺáµèÅÐÍØ»¡Ã³ìáÊ´§¼Å
àÊÁ×͹¡ÑºÁÕ¡ÒÃì´áÊ´§¼ÅÊͧ¡ÒÃì´
1. µèÍÍØ»¡Ã³ìáÊ´§¼ÅÀÒ¹͡ (àªè¹ ¨ÍáÊ´§¼ÅËÃ×Íâ»ÃਡàµÍÃì) à¢éҡѺ¾ÍÃ쵢ͧà¤Ã×èͧ 㹡ÒÃàª×èÍÁµèÍâ·Ã·Ñȹì
ãËéµèÍà¢éҡѺ¾ÍÃìµ TV output ¢Í§à¤Ã×èͧ(”¡ÒÃàª×èÍÁµèÍâ·Ã·ÑÈ¹ì” (¹. 98))
2. ¡´»ØèÁ¢ÇҢͧ·Ñªá¾´º¹à´Ê¡ì·Í» ãËé¤ÅÔ¡ Properties áÅéǤÅÔ¡·Õèá·çº Settings
3. ¤ÅÔ¡·Õèäͤ͹¢Í§¨ÍÀÒ¾ '2' àÅ×Í¡àªç¤ºçÍ¡«ì 'Extend my Windows desktop onto this monitor' ¨Ò¡¹Ñ鹤ÅÔ¡ Apply
4. àÁ×èÍ¡ÒáÓ˹´¤èҤ͹¿Ô¡¡ÙàêѹàÊÃç¨ÊÁºÙóìáÅéÇ ãËé¤ÅÔ¡ Identify ·Õè´éÒ¹«éÒ¢ͧ Troubleshoot ÍØ»¡Ã³ìáÊ´§¼ÅËÅÑ¡
(¨Í LCD) áÊ´§á·¹´éÇ '1', áÅШÍáÊ´§¼Å·ÕèÊͧáÊ´§à»ç¹ '2' ¢³Ð¹Õé¤Ø³ÊÒÁÒö´Ù˹éÒ¨Íä´é¨Ò¡·Ñé§Êͧ¨Í
1 : ¨ÍËÅÑ¡ (Primary)
100 ¤ÙèÁ×ͼÙéãªé
2 : ¨Í·ÕèÊͧ (Secondary)
àÁ×èͤسãªé Dual View á¹Ð¹ÓãËé¡Ó˹´¤èҤ͹¿Ô¡ LCD à»ç¹ 'Primary'
ËÒ¡¨Í·ÕèÊͧ (secondary display) áÊ´§¼Å·Õè 640x480 ¾Ô¡à«Å 256 ÊÕ à»ÅÕ蹡ÒõÑ駤èÒà»ç¹¤ÇÒÁÅÐàÍÕ´
áÅШӹǹÊÕ·Õèµéͧ¡ÒÃã¹ä´ÍÐÅçÍ¡ºçÍ¡«ì[Display Properties]
¡ÒûԴâËÁ´ Dual View
¤ÅÔ¡·Õèäͤ͹ monitor '2' ¡àÅÔ¡¡ÒÃàÅ×Í¡àªç¤ºçÍ¡«ì 'Extend my Windows desktop onto this monitor' ¨Ò¡¹Ñ鹤ÅÔ¡ Apply
¡ÒÃÂéÒÂÇÔ¹â´ÇìÃÐËÇèÒ§ÍØ»¡Ã³ìáÊ´§¼Åã¹âËÁ´ Dual View
¤ÅÔ¡·ÕèäµàµÔźÒÃì¢Í§ÇÔ¹â´Çìã¹ÍØ»¡Ã³ìáÊ´§¼ÅËÅÑ¡ (1, ¨Í LCD) áÅéÇÅÒ¡ä»ÂѧÍØ»¡Ã³ìáÊ´§¼Å·ÕèÊͧ (2) ÇÔ¹â´Çì
¨Ð¶Ù¡ÂéÒÂä»ÂѧÍØ»¡Ã³ìáÊ´§¼Å·ÕèÊͧ
¡ÒûÃѺáµè§à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³ 101
¡ÒÃãªéÍØ»¡Ã³ìáÊ´§¼ÅÀÒ¹͡ (âËÁ´ªÔ»à«çµ Intel (¹. 96))
¡ÒÃãªéÍØ»¡Ã³ìáÊ´§¼ÅẺµè;èǧÀÒ¹͡ àªè¹ ¨ÍËÃ×Íâ»ÃਡàµÍÃì ¤Ø³ÊÒÁÒöàÅ×Í¡ÇèÒ¨ÐáÊ´§à©¾ÒШͷÕèµè;èǧ
ËÃ×ÍáÊ´§·Ñé§Êͧ¨Í¾ÃéÍÁ¡Ñ¹¡çä´é ¤Ø³ÊÒÁÒöáÊ´§Ë¹éÒ¨Í㹨ÍÊͧ¨ÍµèÍà¹×èͧ¡Ñ¹ à¾×èÍà¾ÔèÁ¾×é¹·Õè㹡ÒÃáÊ´§¼Åä´éÍÕ¡´éÇÂ
¡ÒÃãªéÍØ»¡Ã³ìáÊ´§¼ÅẺµè;èǧÀÒ¹͡ÁÕ»ÃÐ⪹ìÍÂèÒ§ÂÔè§ã¹¡ÒùÓàʹͼŧҹËÃ×Í¡ÒÃÃѺªÁä¿ÅìÇÔ´ÕâÍ
ªÔ»à«çµÃØè¹ 910GML äÁèÃͧÃѺàÍÒµì¾Øµ HDTV
1. µèÍÍØ»¡Ã³ìáÊ´§¼ÅÀÒ¹͡ (àªè¹ ¨ÍáÊ´§¼ÅËÃ×Íâ»ÃਡàµÍÃì) à¢éҡѺ¾ÍÃ쵢ͧà¤Ã×èͧ 㹡ÒÃàª×èÍÁµèÍâ·Ã·Ñȹì
ãËéµèÍà¢éҡѺ¾ÍÃìµ TV output ¢Í§à¤Ã×èͧ(”¡ÒÃàª×èÍÁµèÍâ·Ã·ÑÈ¹ì” (¹. 98))
2. ¤ÅÔ¡¢ÇÒ·Õèà´Ê¡ì·Í» áÅéÇàÅ×Í¡ Graphics Properties
3. ·Õèá·çº Display Devices ãËéàÅ×Í¡ÍØ»¡Ã³ìáÊ´§¼Å·Õèµéͧ¡Òà áÅéǤÅÔ¡ OK (ÃÒ¡ÒâͧÍØ»¡Ã³ì·Õè»ÃÒ¡¯¢Öé¹
¨Ð¢Öé¹ÍÂÙè¡ÑºÍØ»¡Ã³ì·Õè àª×èÍÁµèÍÍÂÙè ³ ¢³Ð¹Ñé¹)
102 ¤ÙèÁ×ͼÙéãªé
Monitor
áÊ´§¼Åº¹ÍØ»¡Ã³ìÀÒ¹͡à·èÒ¹Ñé¹ àªè¹Ë¹éÒ¨ÍËÃ×Íâ»ÃਡàµÍÃì
Television
¤Ø³ÊÒÁÒö´Ù˹éÒ¨Íä´é·Ò§ TV à·èÒ¹Ñé¹
Notebook
áÊ´§·Õè¨Í LCD ¢Í§â¹éµºØê¤à·èÒ¹Ñé¹
Intel(R) Dual
Display Clone
áÊ´§Ë¹éÒ¨Íà´ÕÂǡѺ˹éÒ¨Í LCD ¢Í§â¹éµºØê¤ áÅк¹Ë¹éÒ¨ÍÍØ»¡Ã³ìÀÒ¹͡ àªè¹¨ÍáÊ´§¼ÅËÃ×Í â»ÃਡàµÍÃì
Extended Desktop
¢ÂÒ¨ÍãËéãªé·Ñé§¨Í LCD ¢Í§â¹éµºØ¤ê áÅШͧ͢ÍØ»¡Ã³ìÀÒ¹͡àªè¹ ˹éÒ¨ÍËÃ×Íâ»ÃਡàµÍÃìà¾×èÍãËéä´é¾×é¹·Õè
·Ó§Ò¹à¾ÔèÁ¢Öé¹à»ç¹Êͧà·èÒ
¡ÒÃÊÅѺÍØ»¡Ã³ìáÊ´§¼Åâ´Âãªéªç͵¤Ñ·
¤Ø³ÊÒÁÒöÊÅѺÍØ»¡Ã³ìáÊ´§¼Åä´é§èÒÂæ â´Â¡Òá´»ØèÁªç͵¤Ñ· <Fn>+<F4/ >
㹡óշÕèÁÕÍØ»¡Ã³ìáÊ´§¼ÅÀÒ¹͡ËÅÒª¹Ô´µèÍÍÂÙè ÅӴѺ¢Í§¡ÒÃáÊ´§¼Å¨Ðà»ç¹´Ñ§¹Õé
LCD > CRT > TV > LCD+CRT > LCD+TV > LCD àÁ×èÍ¡´»ØèÁ <Fn>+<F4 /
>
¤Ø³äÁèÊÒÁÒöãªé¤ÕÂìÅÑ´ <Fn>+<F4/ > ¡Ñº¾ÃÍÁµì¢Í§ DOS ã¹âËÁ´àµçÁ˹éÒ¨Í ËÃ×Íà´Ê¡ì·Í»áºº¢ÂÒÂ
¡ÒÃà»ÅÕè¹ÍØ»¡Ã³ì¡ÒÃáÊ´§¼ÅÍÂèÒ§§èÒÂæ
¤ÅÔ¡¢ÇÒ·Õèà´Ê¡ì·Í» áÅéÇàÅ×Í¡ Graphics Options > Output à¾×èÍà»ÅÕè¹ÍØ»¡Ã³ìáÊ´§¼Å»Ñ¨¨ØºÑ¹ÍÂèÒ§§èÒÂæ
¡ÒÃà»ÅÕ蹤ÇÒÁÅÐàÍÕ´¢Í§Ë¹éÒ¨ÍáÅФسÀÒ¾ÊÕ
Ëҡ˹éÒ¨ÍäÁèªÑ´ ãËéÅͧà»ÅÕ蹤ÇÒÁÅÐàÍÕ´˹éÒ¨ÍáÅФسÀÒ¾ÊÕ ã¹ÀÒ¾¢Í§¢Ñ鹵͹·Õè 3 ãËéàÅ×Í¡ Display
Settings áÅлÃѺ Color Quality, Screen Resolution, Refresh Rate ¢Í§Ë¹éҨʹéÒ¹¢ÇÒ
àÁ×èÍãªé LCD áÅШÍÀҾẺ¡ÇéÒ§ ¢¹Ò´¢Í§¨Í LCD áÅШÍÀÒ¾ÍÒ¨µèÒ§¡Ñ¹ 㹡ÒáÓ˹´ãËéà»ç¹¢¹Ò´à´ÕÂǡѹ
ãËéàÅ×Í¡ ‘Intel(R) Dual Display Clone’
¡ÒûÃѺáµè§à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³ 103
¡ÒèѴ¡ÒÃÃкº
¡ÒÃãªéµÑÇàÅ×Í¡¡ÒÃãªé¾Åѧ§Ò¹ (Power Management)
¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³ÁÕµÑÇàÅ×Í¡ Power Management ·ÕèÊÒÁÒöªèÇÂãËéãªé»ÃШØä¿¿éҨҡẵàµÍÃÕèä´é¹Ò¹¢Öé¹ áÅÐà¾ÔèÁÍÒÂØ
¡ÒÃãªé§Ò¹¢Í§áºµàµÍÃÕè µÑÇàÅ×Í¡ Power-management ¨ÐÅ´¤ÇÁàÃçÇ㹡Ò÷ӧҹËÃ×ͻԴ¡Ò÷ӧҹ¢Í§ÍØ»¡Ã³ìµèÒ§æ ¢Í§
ÃкºàÁ×èÍäÁèÁÕ¡ÒÃãªé§Ò¹
Power management ÍÒ¨·ÓãËé»ÃÐÊÔ·¸ÔÀҾ㹡Ò÷ӧҹ¢Í§ÃкºÅ´Å§ ¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³¨ÐÃѹàÃçÇ·ÕèÊØ´ àÁ×èÍÁÕ¡ÒÃàª×èÍÁµèÍ
ÊÒÂä¿à¢éҡѺáËÅ觨èÒÂä¿ «Ö觨ÐäÁèÁÕ¡ÒÃãªé§Ò¹ power management
ã¹Êèǹ¶Ñ´ä» ¨Ð¡ÅèÒǶ֧ÇÔ¸Õ¡ÒèѴ¡ÒþÅѧ§Ò¹áºº¾×é¹°Ò¹áÅÐẺ«Ñº«é͹
ÃٻẺ¡ÒèѴ¡ÒþÅѧ§Ò¹¾×é¹°Ò¹ (Basic Power Management Schemes)
Êèǹ¹Õé͸ԺÒ¶֧ÇÔ¸Õ¡ÒèѴ¡ÒþÅѧ§Ò¹¾×é¹°Ò¹àÁ×èͤÍÁ¾ÔÇàµÍÃì·Ó§Ò¹â´Âãªé¾Åѧ§Ò¹¨Ò¡áºµàµÍÃÕèËÃ×Íãªé¾Åѧ§Ò¹¨Ò¡ä¿ AC
Standby vs. Hibernation
Hibernation ¤×ÍʶҹзÕè¢éÍÁÙÅã¹Ë¹èǤÇÒÁ¨Ó¶Ù¡¨Ñ´à¡çºÅ§ã¹ä¿Åì¾ÔàÈÉã¹ÎÒÃì´´ÔÊ¡ì áÅÐ Standby
¨Ðà»ç¹¡ÒÃãªé¾×é¹·ÕèàÅ硹éÍÂà¾×èÍà¡çººÑ¹·Ö¡¢éÍÁÙÅ ¤Ø³ÍÒ¨à¡Ô´¢éÍÁÙÅÊÙ−ËÒÂä´éàÁ×èÍÍÂÙèã¹âËÁ´ Standby
´Ñ§¹Ñé¹á¹Ð¹ÓãËé¤Ø³ºÑ¹·Ö¡§Ò¹·Ñé§ËÁ´¡è͹à¢éÒÊÙèâËÁ´ Standby
¡ÒÃà»ÅÕè¹ÍØ»¡Ã³ì:
ËéÒÁà»ÅÕè¹¾Õ«Õ¡ÒÃì´¢³Ð·ÕèÍÂÙèã¹âËÁ´ standby ËÃ×Í hibernate
¡ÒÃà¢éÒÊÙèÇÔ¹â´Çì power management ãËé·ÓµÒÁ¢Ñ鹵͹µèÍ仹Õé:
1. ¤ÅÔ¡ Start > Control Panel > Performance and Maintenance
2. ¤ÅÔ¡äͤ͹
104 ¤ÙèÁ×ͼÙéãªé
à¾×èÍáÊ´§ÇÔ¹â´Çì Power Options Properties
3. ¤ÅÔ¡á·çº Power Schemes à¾×èÍáÊ´§µÑÇàÅ×Í¡ÊÓËÃѺ¡ÒèѴ¡ÒþÅѧ§Ò¹¾×é¹°Ò¹
¡ÒõÑ駤èÒ Power Setting ¶Ù¡¡Ó˹´à»ç¹ âËÁ´ BatteryMgr-Normal Mode BatteryMgr-Normal Mode
Â×´ÃÐÂÐàÇÅÒ¡Ò÷ӧҹ¢Í§áºµàµÍÃÕè àÁ×èÍãªé¾Åѧ§Ò¹¨Ò¡áºµàµÍÃÕè áÅÐãªé¤Ø³ÊÁºÑµÔ Intel Speedstep
ÍÂèÒ§àµçÁ»ÃÐÊÔ·¸ÔÀÒ¾ à¹×èͧ¨Ò¡âËÁ´¹Õé¨Ðãªé»ÃÐÊÔ·¸ÔÀÒ¾¢Í§¤ÇÒÁàÃçÇ㹡ÒûÃÐÁÇżŢͧÃкº
à¾×èÍãËéãªé¾Åѧ§Ò¹µèÓÊØ´ ¤Ø³ÍÒ¨¾ºÇèÒ¡Ò÷ӧҹàÁ×èÍãªéẵàµÍÃÕè¨ÐªéÒ¡ÇèÒàÁ×èÍãªé¾Åѧ§Ò¹¨Ò¡ä¿¿éÒ¡ÃÐáÊÊÅѺ
㹡ÒÃãªéâËÁ´ BatteryMgr-Normal ã¹Ãкº Windows â»Ã´µÔ´µÑé§â»Ãá¡ÃÁ Battery Manager
â´ÂãªéÊ×èÍà¡çº¢éÍÁÙÅ System Software
4. àÅ×Í¡àÇÅÒ·Õè¤Ø³µéͧ¡ÒÃãËé¡Ò÷ӧҹáµèÅÐÍÂèÒ§à¡Ô´¢Öé¹ã¹âËÁ´ Battery áÅÐ AC power
•
•
•
•
»Ô´Ë¹éÒ¨Í
»Ô´¡Ò÷ӧҹ¢Í§ÎÒÃì´´ÔÊ¡ì
à¢éÒÊÙèâËÁ´Êáµ¹´ìºÒÂ
à¢éÒÊÙèâËÁ´ hibernates
¡ÒûԴ¨ÍÁ͹ÔàµÍÃìáÅÐÎÒÃì´´ÔÊ¡ì¨ÐÅ´¡ÒÃãªé¾Åѧ§Ò¹¨Ò¡áºµàµÍÃÕè ´Ñ§¹Ñé¹àÁ×èÍÍÂÙèã¹âËÁ´ãªé§Ò¹áºµàµÍÃÕèà·èÒ¹Ñé¹
ãËéàÅ×Í¡àÇÅÒ·ÕèÊÑé¹·ÕèÊØ´
¤Ø³ÊÒÁÒö¡Ó˹´µÒÃҧ㹡Òà shutdown, à¢éÒÊÙèâËÁ´ Hibernation ËÃ×Í Standby ä´éâ´Â¤ÅÔ¡·Õè System > Computer
Scheduling ¢Í§â»Ãá¡ÃÁ EasyBox (”¡ÒÃãªé EasyBox” ·Õè˹éÒ 34)
ËÒ¡¤Ø³à»ÅÕ蹡ÒõÑ駤èÒ¡ÒÃãªé¾Åѧ§Ò¹ã¹â»Ãá¡ÃÁ Battery Manager ¡ÒõÑ駤èҢͧÇÔ¹â´Çì 'Power Options
Properties' ¨ÐÁÕ¡ÒÃà»ÅÕè¹á»Å§â´ÂÍѵâ¹ÁÑµÔ (”¡ÒÃãªé Battery Manager” (¹. 110))
¡ÒèѴ¡ÒÃÃкº 105
âËÁ´ Hibernate (Power Management ËÃ×ÍÇÔ¸Õ¡ÒÃẺ¡Ó˹´àͧ)
àÁ×èÍÁÕ¡ÒÃãªéâËÁ´ hibernation ¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³¨Ð»Ô´ä» áÅÐàÁ×èͤسà»Ô´à¤Ã×èͧÍÕ¡¤ÃÑé§ ·Ø¡æ ÍÂèÒ§¨Ð¡ÅѺÁÒÍÂÙèã¹Ê¶Ò¾
à´ÔÁ·Õèãªé§Ò¹ÃÇÁ·Ñé§â»Ãá¡ÃÁµèÒ§æ áÅÐàÍ¡ÊÒõèÒ§æ ·Õè¤Ø³ÂѧäÁèä´éºÑ¹·Ö¡ËÃ×ͻԴ ·Ø¡ÍÂèÒ§ã¹Ë¹èǤÇÒÁ¨Ó¨Ð¶Ù¡ºÑ¹·Ö¡
äÇéã¹ÎÒÃì´´ÔÊ¡ì â´Â˹éÒ¨ÍáÅÐÎÒÃì´´ÔÊì¨Ð¶Ù¡»Ô´¡Ò÷ӧҹä»
ËÒ¡¤Ø³µÔ´µÑé§ Windows ãËÁè:
¤Ø³¤ÇÃãªéâËÁ´ hibernate ÍÕ¡¤ÃÑé§ã¹µÑÇàÅ×Í¡¾Åѧ§Ò¹ â´Â¡ÒÃà»Ô´ÇÔ¹â´Çì Power Options Properties áÅéǤÅÔ¡
·Õèá·çº Hibernate ¨Ò¡¹Ñ鹤ÅÔ¡ "Enable Hibernation"
á·çº Hibernate
¡ÒÃËÂØ´·Ó§Ò¹ºèÍÂæ:
ËÒ¡¤Ø³ÁÕ¡Ò÷ӧҹáÅéÇËÂØ´à»ç¹ÃÐÂÐ ¤Ø³ÍÒ¨àÅ×Í¡ãËé¤ÍÁ¾ÔÇàµÍÃìà¢éÒÊÙèâËÁ´ hibernation Íѵâ¹ÁѵÔ
ËÅѧ¨Ò¡àÇÅÒ¼èÒ¹ä»ÃÐÂÐ˹Ö觵ÒÁµÑÇàÅ×Í¡¢Í§¡ÒèѴ¡ÒþÅѧ§Ò¹
âËÁ´ Standby (Power Management ËÃ×ÍÇÔ¸Õ¡ÒÃẺ¡Ó˹´àͧ)
Standby ÁÑ¡¨Ðãªéà¾×èÍ¡ÒûÃÐËÂÑ´¾Åѧ§Ò¹ã¹¤ÍÁ¾ÔÇàµÍÃìâ¹éµºØ¤ê «Ö觨ÐÁÕ»ÃÐ⪹ì㹡ÒáÅѺÁÒ·Ó§Ò¹ä´éÍÕ¡¤ÃÑé§
â´ÂäÁèµéͧÃͺٵà¤Ã×èͧãËÁè âËÁ´ Standby ¨Ð»Ô´¡Ò÷ӧҹ¢Í§¨ÍáÅÐÎÒÃì´´ÔÊ¡ì à¾×èÍãËéÃкºÅ´¡ÒÃãªé¾Åѧ§Ò¹Å§
àÁ×èͤس¡ÅѺÁÒãªé¤ÍÁ¾ÔÇàµÍÃì ¨ÐÊÒÁÒöãªé§Ò¹µèÍä´éã¹ÊÀÒÇÐà´ÔÁ á¹Ð¹ÓÇèÒËéÒÁà¢éÒâËÁ´ standby â´Âãªé¾Åѧ§Ò¹
ẵàµÍÃÕè¹éÍ¡ÇèÒ 20%
5. ¤ÅÔ¡ OK à¾×èÍ¡Ó˹´µÑÇàÅ×Í¡¡ÒèѴ¡ÒþÅѧ§Ò¹áÅлԴÇÔ¹â´Çìä»
Rest Key:
¡ÒÃãªé»ØèÁ¼ÊÁ <Fn+Esc/ > ¨ÐäÁèÁÕ¼Å㹡ÒÃãªéâËÁ´ Standby ËÃ×Í Hibernate
àÁ×èͤس¡ÓÅѧãªé§Ò¹â»Ãá¡ÃÁÁÑŵÔÁÕà´Õ ËÃ×ÍÁÕÍØ»¡Ã³ì USB àª×èÍÁµèÍáÅСÓÅѧãªé§Ò¹ÍÂÙè
106 ¤ÙèÁ×ͼÙéãªé
ÃٻẺ¡ÒèѴ¡ÒþÅѧ§Ò¹áºº«Ñº«é͹ (Advance Power Management Schemes)
Êèǹ¹Õé͸ԺÒÂà¡ÕèÂǡѺÃٻẺ¡ÒèѴ¡ÒþÅѧ§Ò¹áºº«Ñº«é͹ ÁÕ»ØèÁÊͧ»ØèÁ·Õè¤Ø³ÊÒÁÒöãªéà¾×èÍ»ÃÐËÂÑ´¾Åѧ§Ò¹
¡ÒÃà¢éÒÊÙèÇÔ¹â´Çì power management ãËé·ÓµÒÁ¢Ñ鹵͹µèÍ仹Õé:
1. ¤ÅÔ¡ Start > Control Panel > Performance and Maintenance
2. ¤ÅÔ¡äͤ͹
à¾×èÍáÊ´§ÇÔ¹â´Çì Power Options Properties
3. ¤ÅÔ¡á·çº Advanced à¾×èÍáÊ´§µÑÇàÅ×Í¡ÊÓËÃѺ¡ÒèѴ¡ÒþÅѧ§Ò¹áºº«Ñº«é͹
á·çº Advanced
»ØèÁ Power & Sleep
Programming Windows
4. àÅ×Í¡âËÁ´ (Do nothing/Ask me what to do/Standby/Hibernate/Shut down) ãËé¡Ñº»ØèÁ Power áÅÐ/ËÃ×Í Rest <Esc/
> àÅ×Í¡¡Ò÷ӧҹ (Do nothing/Standby/Hibernate) ·ÕèÊÑÁ¾Ñ¹¸ì¡Ñº¡ÒûԴ½Ò¤Ãͺà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì
»ØèÁ "Rest" ¡Ó˹´ãËé¡Ñº»ØèÁ <Fn+Esc/ > â»Ã´´Ù ”ÃٻẺ¡ÒèѴ¡ÒþÅѧ§Ò¹¾×é¹°Ò¹ (Basic Power
Management Schemes)” ·Õè˹éÒ 104 à¾×èÍãËéà¢éÒ㨡Ò÷ӧҹ¢Í§âËÁ´ Standby áÅÐ Hibernate
5. ¤ÅÔ¡ OK à¾×èÍ¡Ó˹´µÑÇàÅ×Í¡¡ÒèѴ¡ÒþÅѧ§Ò¹áÅлԴÇÔ¹â´Çìä»
¤Ø³ÊÒÁÒö¡ÅѺä»ÂѧâËÁ´¡Ò÷ӧҹ»¡µÔä´éËÅѧ¨Ò¡ä´éãªé»ØèÁ "Power Management" â´Â¡Òá´áÅлÅèÍ»ØèÁ Power
¡ÒèѴ¡ÒÃÃкº 107
¡ÒÃãªéẵàµÍÃÕè
â»Ã´´Ù¤Óá¹Ð¹ÓµèÍ仹ÕéàÁ×èÍÁÕ¡ÒÃÃѹ¤ÍÁ¾ÔÇàµÍÃìâ´Âãªé¾Åѧ§Ò¹¨Ò¡áºµàµÍÃÕèâ´ÂäÁèä´éµèÍÊÒÂä¿ AC
â»Ã´ÍèÒ¹¤Óá¹Ð¹Óà¡ÕèÂǡѺẵàµÍÃÕè¡è͹ãªé§Ò¹
â»Ã´´Ù¢éÍÁÙÅà¡ÕèÂǡѺ¡Ò÷ӧҹ¢Í§Ãкº (¹. 148) 㹤ÙèÁ×͹ÕéáÅзӧҹáÅШѴà¡çºáºµàµÍÃÕèäÇé·ÕèÍسËÀÙÁÔËéͧ
¡ÒöʹáÅÐãÊèẵàµÍÃÕè
1. »Ô´à¤Ã×èͧáÅлԴ¨Í LCD
2. ˧ÒÂà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì¢Öé¹â´ÂÇÒ§º¹¼ÔÇàÃÕº
3. ´Ö§ÊÅÑ¡ÂִẵàµÍÃÕè·Ñé§ÊͧÍÍ¡´éÒ¹¹Í¡ (
) áÅéǹÓẵàµÍÃÕèÍÍ¡
4. ¡ÒÃãÊèẵàµÍÃÕèÍÕ¡¤ÃÑé§ ãËéÊʹẵàµÍÃÕèŧã¹à¤Ã×èͧ´Ñ§¹Õé ÊÅÑ¡ÂִẵàµÍÃÕè¨ÐàÅ×è͹à¢éÒ áÅÐÂִẵàµÍÃÕèäÇéâ´ÂÍѵâ¹ÁѵÔ
108 ¤ÙèÁ×ͼÙéãªé
¡ÒõÃǨÊͺ»ÃШآͧẵàµÍÃÕè
¤Ø³ÊÒÁÒö´Ù»ÃШآͧẵàµÍÃÕèä´éâ´Â·ÓµÒÁ¢Ñ鹵͹µèÍ仹Õé
¡ÒÃãªé»ØèÁªç͵¤Ñ·à¾×èÍàÃÕ¡´Ù
¡´»ØèÁ <Fn>+<F2/
> ·Õèá»é¹¾ÔÁ¾ì ¨Ð»ÃÒ¡¯áËÅ觨èÒÂ俻Ѩ¨ØºÑ¹áÅлÃШطÕèàËÅ×ÍÍÂÙè·ÕèÁØÁº¹«éÒ¢ͧ˹éÒ¨Í
¡ÒÃàÃÕ¡´ÙẵàµÍÃÕè
¤ÅÔ¡»ØèÁ PUSH ·ÕèẵàµÍÃÕè ¨Ð»ÃÒ¡¯»ÃШØẵàµÍÃÕè·ÕèàËÅ×ÍÍÂÙè (%)
»ØèÁ Push
¡ÒÃàÃÕ¡´Ù¼èÒ¹ Control Panel
àÅ×Í¡á·çº Start > Control Panel > Performance and Maintenance > Power Option > Power Measure
¤Ø³¨ÐÊÒÁÒöàÃÕ¡´ÙáËÅ觨èÒÂ俻Ѩ¨ØºÑ¹áÅлÃШØẵàµÍÃÕè·ÕèàËÅ×ÍÍÂÙè
ʶҹТͧà¾ÒàÇÍÃì«Ñ¾¾ÅÒÂ
»ÃШآͧẵàµÍÃÕè·ÕèàËÅ×Í
¡ÒÃãªéẵàµÍÃÕè
ẵàµÍÃÕè¤×ÍÍØ»¡Ã³ì·ÕèàÊ×èÍÁÊÀÒ¾ä´é ´Ñ§¹Ñé¹àÁ×èͤسãªéä»à»ç¹àÇÅÒ¹Ò¹ ¤ÇÒÁ¨Ø/ÍÒÂآͧẵàµÍÃÕè¨ÐŴŧ
ËҡẵàµÍÃÕèŴŧ¨¹àËÅ×ÍäÁè¶Ö§¤ÃÖ觢ͧàÇÅÒàÃÔèÁµé¹ àÃÒá¹Ð¹ÓãËé¤Ø³«×éÍẵàµÍÃÕèãËÁè
¡ÒèѴ¡ÒÃÃкº 109
¤Óàµ×͹à¡ÕèÂǡѺ¡ÒÃãªéẵàµÍÃÕè
¤Ø³¨Ðä´éÂÔ¹àÊÕ§àµ×͹àÁ×èÍÁÕ»ÃШØẵàµÍÃÕèàËÅ×ÍÍÂÙèµèÓ¡ÇèÒ 10% µèÍÊÒÂà¤àºÔÅËÃ×ͻԴà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì
áÅеԴµÑé§áºµàµÍÃÕèãËÁè·ÕèÁÕ»ÃШØàµçÁ
àÁ×èÍ»ÃШØẵàµÍÃÕèàËÅ×ÍÍÂÙè¹éÍ¡ÇèÒ 3% ¤ÍÁ¾ÔÇàµÍÃì¨ÐºÑ¹·Ö¡§Ò¹»Ñ¨¨ØºÑ¹áÅлԴà¤Ã×èÍ§ä» «Öè§ÍҨᵡµèÒ§¡Ñ¹ä»
µÒÁ¡ÒõÑ駤èÒã¹á·çº Control Panel > Performance and Maintenance > Power Options > Alarms
Â×´ÃÐÂÐàÇÅÒ¡Ò÷ӧҹ¢Í§áºµàµÍÃÕè
¡ÒÃÅ´¤ÇÒÁÊÇèÒ§¢Í§¨Í LCD
¡ÒÃÅ´¤ÇÒÁÊÇèÒ§¢Í§ LCD â´Â¡´»ØèÁ <Fn>+< > ÃèÇÁ¡Ñ¹º¹á»é¹¾ÔÁ¾ì ËÃ×Í»ÃѺ¤ÇÒÁÊÇèÒ§ã¹â»Ãá¡ÃÁ Battery
Manager ¨ÐªèÇÂÂ×´ÃÐÂÐàÇÅÒ¡ÒÃãªéẵàµÍÃÕè
¡ÒÃÅ´¤ÇÒÁÊÇèÒ§¢Í§ LCD ŧ˹Öè§ÃдѺ¨ÐÂ×´ÃÐÂÐàÇÅÒ¡ÒÃãªé§Ò¹áºµàµÍÃÕèä´é 3~5% (10~20 ¹Ò·Õ) (àÇÅÒ㹡ÒÃãªéẵàµÍÃÕè
¢Öé¹ÍÂÙè¡ÑºÃØ蹢ͧà¤Ã×èͧ´éÇÂ)
¡ÒÃãªé Battery Manager
Battery Manager à»ç¹â»Ãá¡ÃÁ¨Ñ´¡ÒáÒÃãªé¾Åѧ§Ò¹·ÕèªèÇÂãËéÊÒÁÒöãªé¾Åѧ§Ò¹ä´éÍÂèÒ§ÁÕ»ÃÐÊÔ·¸ÔÀÒ¾
¤Ø³ÊÒÁÒöà»ÅÕè¹âËÁ´¡ÒÃãªé¾Åѧ§Ò¹â´Â§èÒ´Ò â´ÂàÅ×Í¡âËÁ´¡ÒÃãªé¾Åѧ§Ò¹·ÕèàËÁÒÐÊÁ áÅÐÂ×´ÃÐÂÐàÇÅÒ㹡ÒÃ
·Ó§Ò¹¢Í§áºµàµÍÃÕè´éÇ¡ÒõÑ駤èÒµÑÇàÅ×Í¡µèÒ§æ
¤ÅÔ¡·Õè Start > All Programs > Samsung > Samsung Battery Manager > Samsung Battery Manager
àÅ×Í¡ Power Mode
¤Ø³ÊÒÁÒöà»ÅÕè¹ÃÒÂÅÐàÍÕ´
¡ÒáÓ˹´¤Í¹¿Ô¡ä´é੾ÒÐã¹
Custom Mode à·èÒ¹Ñé¹
Power Saving Effects
110 ¤ÙèÁ×ͼÙéãªé
• Maximum Battery Saving Mode : âËÁ´¹ÕéàËÁÒÐÊÓËÃѺÊÀÒÇзÕèµéͧ¡ÒÃãªéẵàµÍÃÕèà»ç¹ÃÐÂÐàÇÅÒ¹Ò¹·ÕèÊØ´
«Öè§ÍҨŴ »ÃÐÊÔ·¸ÔÀҾ㹡Ò÷ӧҹ¢Í§ÃкºÅ§
• Normal Mode : âËÁ´¹ÕéàËÁÒÐÊÓËÃѺ¡Ò÷ӧҹµÒÁ»¡µÔ ·Ñ駻ÃÐÊÔ·¸ÔÀÒ¾¢Í§Ãкº áÅÐÃÐÂÐàÇÅÒ¡ÒÃãªéẵàµÍÃÕè
¨ÐÍÂÙèã¹ÃдѺÊÙ§ÊØ´
• Maximum Performance Mode : âËÁ´¹ÕéàËÁÒÐÊÓËÃѺÊÀÒÇзÕèµéͧ¡ÒûÃÐÊÔ·¸ÔÀÒ¾¢Í§ÃкºÊÙ§ÊØ´
´Ñ§¹Ñé¹àÇÅÒ㹡ÒÃãªé§Ò¹ÂèÍÁ¨ÐÊÑé¹Å§´éÇÂ
• Custom Mode : ã¹âËÁ´¹Õé ¼ÙéãªéÊÒÁÒö¡Ó˹´ÃÒÂÅÐàÍÕ´¤Í¹¿Ô¡µèÒ§æ ä´éàͧà¾×èÍÅ´¡ÒÃãªéẵàµÍÃÕè
¤Ø³ÊÒÁÒö»ÃѺ¤ÇÒÁÊÇèÒ§¢Í§¨ÍáÊ´§¼Å LCD àÇÅÒÊáµ¹´ìºÒ¢ͧÃкº ¤Ø³ÀÒ¾Êբͧ˹éÒ¨Í
áÅФèҢͧâËÁ´¡ÃÒ¿Ô¡
¼ÅÅѾ¸ì¡ÒûÃÐËÂÑ´¾Åѧ§Ò¹
áÊ´§ÃÐÂÐàÇÅÒ¡ÒÃãªéẵàµÍÃÕèÊÓËÃѺáµèÅÐâËÁ´¡ÒÃãªé¾Åѧ§Ò¹ ÂÔ觡ÒûÃÐËÂÑ´¾Åѧ§Ò¹ÁÕ»ÃÐÊÔ·¸ÔÀÒ¾
ÁÒ¡à·èÒã´ ¡ÃÒ¿¡ç¨Ð»ÃÒ¡¯ÂÒÇ¢Öé¹à·èÒ¹Ñé¹
àÁ×èÍàÅè¹à¡ÁËÃ×Íãªéá;¾ÅÔपѹÁÑŵÔÁÕà´ÕÂ
à¡ÁËÃ×Íá;¾ÅÔपѹÁÑŵÔÁÕà´Õ¨зӧҹäÁèÃÒºÃ×蹹ѡàÁ×èÍÍÂÙèã¹âËÁ´ Maximum Battery Saving Mode
á¹Ð¹ÓãËéãªéâËÁ´¹ÕéàÁ×è͵èÍÍÐá´»àµÍÃìä¿¿éÒ¡ÃÐáÊÊÅѺ ËÃ×Íã¹âËÁ´ Normal ¢Öé¹ä»
»Ô´ÍØ»¡Ã³ì·ÕèäÁè¨Óà»ç¹
¡ÒûԴÍØ»¡Ã³ì·ÕèäÁè¨Óà»ç¹¨ÐªèÇÂÂ×´ÃÐÂÐàÇÅÒ¡ÒÃãªéẵàµÍÃÕè
àÅ×Í¡ Start > Control Panel > Performance and Maintenance > System > á·çº Hardware áÅФÅÔ¡·Õè Device
Manager ¤ÅÔ¡¢ÇÒ·ÕèÍØ»¡Ã³ì·ÕèäÁèä´éãªé áÅÐàÅ×Í¡ 'Disable' (àªè¹ wireless LAN, 1394 à»ç¹µé¹)
¡ÒõÃǨÊͺẵàµÍÃÕè
ËÒ¡¤Ø³ªÒÃì¨áÅÐãªéẵàµÍÃÕè«éÓæ ã¹àÇÅÒÊÑé¹æ àÇÅÒ㹡ÒÃãªéẵàµÍÃÕè¨ÐŴŧµÒÁÊèǹµèÒ§¢Í§¡ÒêÒÃì¨áºµàµÍÃÕè¨ÃÔ§
áÅСÒÃáÊ´§»ÃШØä¿¿éÒ·ÕèàËÅ×Í ã¹¡Ã³Õ¹Õé »ÃШØ俢ͧẵàµÍÃÕèáÅСÒÃáÊ´§»ÃШØä¿¿éÒ·ÕèàËÅ×ͨÐàËÁ×͹¡Ñ¹ â´Âãªé»ÃШØä¿
¢Í§áºµàµÍÃÕ訹ËÁ´ â´Âãªé¿Ñ§¡ìªÑ¹ Battery Calibration ¨Ò¡¹Ñ鹪ÒÃì¨áºµàµÍÃÕèÍÕ¡¤ÃÑéè§
1. ¶Í´ÊÒÂä¿ AC ÍÍ¡ËÅѧ¨Ò¡»Ô´à¤Ã×èͧ
2. ºÙµà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃìáÅéÇ¡´»ØèÁ <F2> à¾×èÍà¢éÒÊÙè¡ÒõÑ駤èÒ BIOS
3. ãªé»ØèÁÅÙ¡Èà äÎäŵì·Õè Smart Battery Calibration ã¹àÁ¹Ù Boot
¿Ñ§¡ìªÑ¹ Battery Calibration ¨Ð·Ó§Ò¹ áÅкѧ¤ÑºãËéÁÕ¡ÒäÒ»ÃШآͧẵàµÍÃÕè
¡Ò÷ӧҹ¹Õé¨ÐãªéàÇÅÒ 3~5 ªÑèÇâÁ§ â´Â¢Öé¹ÍÂÙè¡Ñº¤ÇÒÁ¨Ø¢Í§áºµàµÍÃÕè áÅлÃШØä¿¿éÒ·ÕèàËÅ×Í
4. ËÅѧ¨Ò¡¡Ãкǹ¡ÒõÃǨÊͺàÊÃç¨áÅéÇ ãËéªÒÃ쨻ÃШØãËÁèÍÕ¡¤ÃÑé§
¡ÒèѴ¡ÒÃÃкº 111
¡ÒÃÍÑ»à¡Ã´Ë¹èǤÇÒÁ¨Ó
¤ÍÁ¾ÔÇàµÍÃìà¤Ã×èͧ¹ÕéÁÕ˹èǤÇÒÁ¨Ó 128 àÁ¡Ð亵ì˹Öè§á¶ÇËÃ×ÍÁÒ¡¡ÇèÒ ËÃ×ÍâÁ´ÙÅ 256 àÁ¡Ð亵ì (ËÃ×ÍÁÒ¡¡ÇèÒ) â´ÂÁÕ«çͤà¡çµ
ÊÓËÃѺâÁ´ÙÅ˹èǤÇÒÁ¨ÓÊͧ«çͤà¡çµ ´Ñ§¹Ñ鹤س¨Ö§ÊÒÁÒöà»ÅÕè¹˹èǤÇÒÁ¨ÓËÃ×͵ԴµÑé§âÁ´ÙÅ˹èǤÇÒÁ¨Óà¾ÔèÁä´é
¡ÒöʹâÁ´ÙÅ˹èǤÇÒÁ¨Ó
¡è͹·Õè¨Ð¶Í´/à»ÅÕè¹âÁ´ÙÅ˹èǤÇÒÁ¨Ó ãËé»Ô´à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃìàÊÕ¡è͹ ËéÒÁà»ÅÕè¹âÁ´ÙÅ˹èǤÇÒÁ¨Ó
¢³Ð·ÕèÃкºÍÂÙèã¹âËÁ´ Standby/Hibernate
1. ãªé䢤ǧà»Ô´ªèͧãÊèâÁ´ÙÅ˹èǤÇÒÁ¨Ó´éÒ¹ÅèÒ§à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì
Ê¡ÃÙ
2. ´Ñ¹á·çºÂÖ´âÁ´ÙÅ˹èǤÇÒÁ¨ÓÍÍ¡à¾×èÍãËéâÁ´ÙÅ˹èǤÇÒÁ¨Ó´Õ´µÑÇ¢Öé¹ÁÒ ¤èÍÂæ ´Ö§âÁ´ÙÅÍÍ¡àºÒæ â´Â·ÓÁØÁ»ÃÐÁÒ³ 30°
112 ¤ÙèÁ×ͼÙéãªé
¡ÒÃà¾ÔèÁâÁ´ÙÅ˹èǤÇÒÁ¨Ó
1. ¹Ó¢Ò¢Í§âÁ´ÙÅ˹èǤÇÒÁ¨ÓãËÁèÁÒÇҧŧ㹪èͧáÅéÇàÅ×è͹à¢éÒä»ã¹ÊÅç͵â´Â·ÓÁØÁ 30°
µÃǨ´ÙãËéá¹èã¨ÇèÒ´éÒ¹ºÒ¡¢Í§âÁ´ÙÅ˹èǤÇÒÁ¨ÓµÃ§¡Ñº¢Í§«çͤà¡çµ
2. ´Ñ¹âÁ´ÙÅ˹èǤÇÒÁ¨Óŧ¨¹¡ÃзÑ觤ÅÔ¡à¢éÒ·Õè ËÒ¡âÁ´ÙÅ˹èǤÇÒÁ¨ÓäÁèà¢éÒ·ÕèʹԷ ¤èÍÂæ ´Ñ¹Ë¹èǤÇÒÁ¨Óŧ
¢³Ð·Õè¡´á·çº¢Í§âÁ´ÙÅ˹èǤÇÒÁ¨ÓÍÍ¡´éÒ¹¹Í¡
3. »Ô´áÅÐÂÖ´ªèͧãÊè˹èǤÇÒÁ¨Óâ´Âãªé䢤ǧ¢Ñ¹ãËéá¹è¹
¡ÒèѴ¡ÒÃÃкº 113
¡ÒÃãªé¾ÍÃìµÅçͤà¾×èÍÃÑ¡ÉÒ¤ÇÒÁ»ÅÍ´ÀÑÂ
ÍØ»¡Ã?ìÅçͤà¾×èÍÃÑ¡ÉÒ¤ÇÒÁ»ÅÍ´ÀѤ×ÍÍØ»¡Ã³ì·Õèãªéà¾×èÍ ‘ÂÖ´’ à¤Ã×èͧàÁ×èÍãªé§Ò¹ã¹·ÕèÊÒ¸ÒóРÍØ»¡Ã³ìÅçͤµéͧ«×éÍà¾ÔèÁµèÒ§ËÒ¡
ÃÙ»ÃèÒ§áÅТ¹Ò´¢Í§¡ÒÃãªéÍҨᵡµèÒ§¡Ñ¹ä»µÒÁ¼Ùé¼ÅÔµ â»Ã´´Ù¤ÙèÁ×Í·ÕèãËéÁÒ¾ÃéÍÁ¡ÑºÍØ»¡Ã³ìà¾×èÍ´ÙÇÔ¸Õ¡ÒÃãªé§Ò¹
1. µèÍÊÒÂà¤àºÔÅÅçͤà¾×èÍÂÖ´à¤Ã×èͧ
2. ¢³Ð·ÕèÂÖ´¡éÒ¹¤Ñ¹Åçͤ¾ÍÃìµà¾×èÍÃÑ¡ÉÒ¤ÇÒÁ»ÅÍ´ÀÑÂä»´éÒ¹«éÒ ãËéµèÍÊÒÂà¤àºÔÅà¢éҡѺ¾ÍÃìµÅçͤà¾×èͤÇÒÁ»ÅÍ´ÀÑÂ
·Ñ駹ÕéäÁèÃѺ»ÃСѹ¤ÇÒÁàÊÕÂËÒ·ÕèÍÒ¨à¡Ô´¢Ö鹡Ѻà¤Ã×èͧ·Õèà¡Ô´¨Ò¡¡ÒÃÅçͤ/ÍØ»¡Ã³ìÅçͤ
114 ¤ÙèÁ×ͼÙéãªé
à¤Åç´ÅѺ㹡ÒÃãªéà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì
¤Óá¹Ð¹ÓµèÍ仹ÕéªèÇ»éͧ¡Ñ¹¤ÇÒÁàÊÕÂËÒ·ÕèÍÒ¨à¡Ô´¢Ö鹡Ѻ¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³ä´é
ÍÂèÒ¾ÂÒÂÒÁá¡Ðà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³ ¡ÒÃá¡Ðà¤Ã×èͧ¨Ð·ÓãËé¡ÒÃÃѺ»ÃСѹÊÔé¹ÊØ´
¡ÒÃà»ÅÕè¹ËÃ×͵ԴµÑé§ÍØ»¡Ã³ìã¹à¤Ã×èͧ µéͧ·Óâ´ÂÈÙ¹ÂìºÃÔ¡Ò÷Õèä´éÃѺ¡ÒÃáµè§µÑé§à·èÒ¹Ñé¹
•
•
•
•
·ÓµÒÁ¤Óá¹Ð¹ÓáÅФÓàµ×͹㹤ÙèÁ×Í¡ÒÃãªé¤ÍÁ¾ÔÇàµÍÃì
¨Í LCD ÁÕ¼ÔǺͺºÒ§ÍÒ¨à¡Ô´¤ÇÒÁàÊÕÂËÒÂä´é§èÒ à¾×èÍ»éͧ¡Ñ¹¡ÒÃàÊÕÂËÒ ãËéËÅÑ¡àÅÕ觡ÒÃÊÑÁ¼ÑÊ˹éÒ¨Í
ãªé੾ÒÐÍÐá´»àµÍÃì AC , ÍÐá´»àµÍÃìÊÓËÃѺãªéã¹Ã¶, ˹èǤÇÒÁ¨ÓáÅÐÍØ»¡Ã³ìÍ×è¹æ ·Õèä´éÃѺ¡ÒÃÃѺÃͧà·èÒ¹Ñé¹
à¹×èͧ¨Ò¡¤ÍÁ¾ÔÇàµÍÃìâ¹éµºØê¤ÁÕ¢¹Ò´àÅç¡áÅÐÁÕ¡ÒÃäËÅàÇÕ¹¢Í§ÍÒ¡ÒÈ·Õè¨Ó¡Ñ´ ¨Ö§ÍÒ¨à¡Ô´¡ÒÃâÍàÇÍÃìÎÕ·
ä´éÁÒ¡¡ÇèÒà¤Ã×èͧà´Ê¡ì·Í» ¾Ñ´ÅÁã¹à¤Ã×èͧÍÒ¨·Ó§Ò¹ä´éàÁ×èͨÓà»ç¹à¾×èÍÅ´¤ÇÒÁÃé͹ µÃǨ´ÙãËéá¹èã¨ÇèҾѴÅÁ
ÃкÒ¤ÇÒÁÃé͹´éÒ¹«éÒ¢ͧà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃìäÁè¶Ù¡»Ô´¡Ñé¹¢³Ð·Õèãªéà¤Ã×èͧ ãËéµÃǨÊͺªèͧÃкÒÂÍÒ¡ÒÈ
áÅйӽØè¹ËÃ×ÍÊÔè§ÍØ´µÑ¹ÍÍ¡ºéÒ§
• ËÅÕ¡àÅÕ觡ÒÃãªéËÃ×Í¡ÒÃà¡çºà¤Ã×èͧäÇéã¹·Õè·ÕèÁÕÍÒ¡ÒÈÃé͹ËÃ×ÍàÂ繨Ѵ àªè¹ã¹Ã¶ã¹Çѹ·ÕèÁÕÍÒ¡ÒÈÃé͹ÁÒ¡ à¡çº
¤ÍÁ¾ÔÇàµÍÃìãËéËèÒ§¨Ò¡ÎÕ·àµÍÃìáÅСÒÃⴹᴴâ´ÂµÃ§ ¡ÒÃÊÑÁ¼ÑʤÇÒÁÃé͹â´ÂµÃ§ÍÒ¨·ÓãËéÍØ»¡Ã³ì
¤ÍÁ¾ÔÇàµÍÃìàÊÕÂËÒÂä´é ËÒ¡¤Ø³·Ôé§à¤Ã×èͧäÇéã¹·ÕèÃé͹¨Ñ´ ãËé·Ôé§à¤Ã×èͧäÇéãËéàÂç¹Å§ã¹ÍسËÀÙÁÔËéͧ (â´Âà»Ô´½Ò LCD ÍÍ¡)
¡è͹ãªéà¤Ã×èͧ
• ËéÒÁà»Ô´½Ò»Ô´âÁ´ÙÅ˹èǤÇÒÁ¨Ó ËÃ×;ÂÒÂÒÁµÔ´µÑé§Ë¹èǤÇÒÁ¨Ó¢³Ð·Õèà»Ô´à¤Ã×èͧ
• ¨Ñ´¾×é¹·Õè·Ó§Ò¹ãËé´Õà¾×èÍ»éͧ¡Ñ¹¡Òâٴ¢Õ´ ¹Ñè§ãËéËÅѧµÃ§áÅÐṺ¡Ñºà¡éÒÍÕé »ÃѺà¡éÒÍÕéËÃ×Íâµêзӧҹà¾×èÍãËéᢹ
áÅТéÍÁ×ÍÍÂÙèã¹µÓá˹觷Õè¼è͹¤ÅÒ áÅТ¹Ò¹ä»¡Ñº¾×é¹ ËÅÕ¡àÅÕ觡ÒúԴ¢éÍÁ×Í¢³Ð·Ó§Ò¹ ᢹ¢Í§¤Ø³¤ÇÃÇÒ§
à˹×Íá»é¹¾ÔÁ¾ìẺʺÒÂæ â»Ã´´Ù˹ѧÊ×Íà¡ÕèÂǡѺËÅÑ¡ÊÃÕÃÐÈÒʵÃìà¾×èÍ´Ù¢éÍÁÙÅà¡ÕèÂǡѺ¡ÒèѴ¾×é¹·Õè·Ó§Ò¹
• ËÂØ´¾Ñ¡à»ç¹ÃÐÂШҡ¡ÒÃãªé¤ÍÁ¾ÔÇàµÍÃìà¾×è;ѡÊÒµÒáÅмè͹¤ÅÒ¡ÅéÒÁà¹×éÍ
• ÍÂèÒÅ×ÁºÑ¹·Ö¡ä¿Åì¢éÍÁÙÅáÅÐáºç¤ÍÑ»ÊÓà¹Ò¢Í§ä¿ÅìäÇé
¡ÒèѴ¡ÒÃÃкº 115
¡ÒÃà´Ô¹·Ò§â´Â¹Óà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃìä»´éÇÂ
¡ÒÃà´Ô¹·Ò§â´Âà¤Ã×èͧºÔ¹
ËÒ¡¤Ø³à´Ô¹·Ò§â´Âà¤Ã×èͧºÔ¹ ãËé·ÓµÒÁà¤Åç´ÅѺµèÍ仹Õé:
• ¹Ó¤ÍÁ¾ÔÇàµÍÃìä»´éÇÂâ´ÂãÊèä»ã¹¡ÃÐà»ëÒÊÓËÃѺãÊèâ¹éµºØê¤ ËéÒÁãÊè¤ÍÁ¾ÔÇàµÍÃìÃÇÁ¡ÑºàÊ×éͼéÒËÃ×ÍÊÔè§Í×è¹æ
• ãËé¤ÍÁ¾ÔÇàµÍÃìáÅдÔÊ¡ì¼èÒ¹à¤Ã×èͧàÍç¡«ìàÃÂìä´é ËéÒÁ¶×Í´ÔÊ¡ì¼èÒ¹à¤Ã×èͧµÃǨ¨ÑºâÅËÐ «Öè§ÍÒ¨·ÓãËé¢éÍÁÙÅÊÙ−ËÒÂä´é
• àµÃÕÂÁ»Ô´à¤Ã×Íè §¤ÍÁ¾ÔÇàµÍÃìÃÐËÇèÒ§·Õèà¤Ã×èͧºÔ¹¢Öé¹áÅÐŧ
¡ÒèѴ¡ÒÃàÁ×èͧ͢àËÅÇË¡ãÊè
ËéÒÁãËé¢Í§àËÅÇã´æ ˡôà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³ ÇÔ¸Õ¡Ò÷Õè´Õ·ÕèÊش㹡Òûéͧ¡Ñ¹¢Í§àËÅÇˡô¤×Í¡ÒÃËÅÕ¡àÅÕ觡Òô×èÁ
ËÃ×Í·Ò¹ÍÒËÒÃã¡Åéà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì ËÒ¡¤Ø³·Ó¢Í§àËÅÇˡôà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³ ãËé»Ô´à¤Ã×èͧ ¶Í´»ÅÑê¡ÍÍ¡·Ñ¹·Õ
áÅéÇ·ÓµÒÁ¢Ñ鹵͹µèÍ仹Õé:
• ËÒ¡¢Í§àËÅÇˡôá»é¹¾ÔÁ¾ì ãËé«Ñº¢Í§àËÅÇ·Õèá»é¹¾ÔÁ¾ìãËéä´éÁÒ¡·ÕèÊØ´à·èÒ·Õè¨Ð·Óä´é ÃÐÇѧÍÂèÒãËé¢Í§àËÅÇˡô¨Í
LCD »ÅèÍÂãËéà¤Ã×èͧáËé§ËÅÒÂæ Çѹ¡è͹¨Ð·´ÅͧãªéÍÕ¡¤ÃÑé§
• ËÒ¡¤Ø³·Ó¢Í§àËÅÇˡôá»é¹¾ÔÁ¾ìÀÒ¹͡ËÃ×Í»ØèÁ¡´ ãËé»Å´ÊÒÂÍÍ¡áÅéǫѺãËéä´éÁÒ¡·ÕèÊØ´à·èÒ·Õè¨Ð·Óä´é
»ÅèÍÂãËéá»é¹¾ÔÁ¾ìáËé§ã¹ÍسËÀÙÁÔËéͧ·Ñé§Çѹ¡è͹¨Ð·´Åͧãªé§Ò¹
¢Í§ËÇÒ¹ÍÒ¨ÁÕ¤ÃÒºà˹ÕÂÇ·ÕèÍÒ¨·ÓãËéá»é¹¾ÔÁ¾ìµÔ´áÁéÇèҤس¨Ð¾ÂÒÂÒÁ«ÑºáÅéÇ¡çµÒÁ
• ËÒ¡¤Ø³·Ó¢Í§àËÅÇˡô¨Í LCD ãËéÃÕº·Ó¤ÇÒÁÊÐÍÒ´·Ñ¹·Õ â´Âãªé¼éÒ¹ØèÁ·ÕèÊÐÍÒ´¨Ò¡¹Ñé¹ãªéáÍÅ¡ÍÎÍÅìà¨×ͨҧ
ËÃ×͹éÓÂÒàªç´·Ó¤ÇÒÁÊÐÍÒ´ LCD â´Â੾ÒÐ ËéÒÁãªé¹éÓ ¹éÓÂÒàªç´¡ÃШ¡ ÍЫÕâµ¹ ¹éÓÂÒÍâÃÁÒµÔ¡ ËÃ×ͼéÒáËé§ËÂÒº
㹡ÒÃàªç´·Ó¤ÇÒÁÊÐÍÒ´à´ç´¢Ò´
¢Í§àËÅǺҧª¹Ô´ÍÒ¨·ÓãËé¨Í LCD àÊÕÂËÒÂä´é ËÒ¡¨ÍáÊ´§¼ÅàÊÕÂËÒ ãËéµÔ´µèÍÈÙ¹ÂìºÃÔ¡Ò÷Õèä´éÃѺ¡ÒÃáµè§µÑé§
à¾×èÍà»ÅÕè¹ÍØ»¡Ã³ìãËÁè
116 ¤ÙèÁ×ͼÙéãªé
¡ÒÃà¡çº¤ÍÁ¾ÔÇàµÍÃìäÇéà»ç¹àÇÅÒ¹Ò¹
ËÒ¡¤Ø³¨ÐäÁèä´éãªéà¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃìà»ç¹àÇÅÒ¹Ò¹ (˹Öè§à´×͹ËÃ×͹ҹ¡ÇèÒ¹Ñé¹) ¤Ø³¤ÇûÅèÍÂãËé»ÃШØä¿¿éÒã¹áºµàµÍÃÕèËÁ´
¡è͹¨Ð¶Í´áºµàµÍÃÕèÍÍ¡¨Ò¡à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì «Ö觨ЪèÇÂÂ×´ÍÒÂØ㹡ÒÃãªé§Ò¹¢Í§áºµàµÍÃÕè
¡ÒèѴ¡ÒÃÃкº 117
¡ÒÃá¡é䢻Ñ−ËÒ
·ÓµÒÁ¢Ñ鹵͹µèÍ仹Õ騹¡ÃзÑè§à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³ÊÒÁÒöãªé§Ò¹ä´éµÒÁ»¡µÔ ËÒ¡·ÓµÒÁ¢Ñ鹵͹·Ñé§ËÁ´áÅéÇ
ÂѧäÁèÊÒÁÒöá¡é䢻Ñ−ËÒä´é ãËéµÔ´µè͵ÑÇá·¹¨Ó˹èÒ¢ͧ¤Ø³à¾×èÍÃѺ¤ÇÒÁªèÇÂàËÅ×Í
¤Ó¶ÒÁáÅФӵͺ
â»Ã´´Ù ”¤Ó¶ÒÁáÅФӵͺ” ·Õè˹éÒ 119 ÊÓËÃѺ¤ÇÒÁªèÇÂàËÅ×Í㹡ÒÃá¡é䢻Ñ−ËÒ㹡Ò÷ӧҹ¢Í§à¤Ã×èͧ
¤ÍÁ¾ÔÇàµÍÃìãËéÊÒÁÒö·Ó§Ò¹ä´éµÒÁ»¡µÔ
µÃǨÊͺ¡ÒÃàª×èÍÁµè͵èÒ§æ
µÃǨÊͺÊÒÂà¾ÒàÇÍÃìáÅÐÊÒÂà¤àºÔŢͧÍØ»¡Ã³ìµè;èǧ·Ñé§ËÁ´ÇèÒä´éàÊÕºà¢éÒ«çͤà¡çµá¹è¹´ÕáÅéÇ
áÅФسä´éà»Ô´à¾ÒàÇÍÃì«Ñ¾¾ÅÒÂáÅéÇ
â»Ãá¡ÃÁ Norton AntiVirus
Ãѹâ»Ãá¡ÃÁ