Samsung | HG43NE590SF | Samsung HG43NE590SF Installation guide

LED TV
Installation manual
Thank you for purchasing Samsung product.
To receive more service, please register your
product at
www.samsung.com/register
Model
Serial No.
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product
appearance. Product design and specifications may be changed without notice.
Introduction
This TV B2B (Business to Business) model is designed for hotels or the other hospitality businesses, supports a variety of special functions,
and lets you limit some user (guest) controls.
Operational Modes
This TV has two modes: Interactive and Stand-alone mode.
yy Interactive mode: In this mode, the TV communicates with and is fully or partially controlled by a connected Set Back Box (SBB) or Set
Top Box (STB) provided by a hospitality SI (System Integration) vendor. When the TV is initially plugged in, it sends a command that
attempts to identify the SSB or STB connected to it. If the TV identifies the SBB or STB and the SBB or STB identifies the TV, the TV gives
full control to the SBB or STB.
yy Stand-alone mode: In this mode, this TV works alone without an external SBB or the STB.
The TV has a Hotel (Hospitality) Menu that lets you easily set its various hospitality functions. Please see pages 22 to 27.
The Menu also lets you activate or de-activate some TV and hospitality functions so you can create your optimal hospitality configuration.
Still image warning
Avoid displaying still images (such as jpeg picture files) or still image elements (such as TV channel logos, panorama or 4:3 format images,
stock or news bars or crawls) on the screen. Displaying still pictures continually can cause uneven screen wear, which will affect image
quality. To reduce the chance that this effect will occur, please follow the recommendations below:
yy Avoid displaying the same TV channel for long periods.
yy Always try to display a full screen image.
yy Reduce brightness and contrast to help prevent the occurrence of after-images.
yy Use all TV features designed to reduce image retention and screen burn-in. Refer to the proper user manual section for details.
Ensuring Proper Ventilation
When you install the TV, maintain the distances shown below between the TV and other objects (walls, cabinet sides, etc.) to ensure proper
ventilation.
Failing to do so may result in a fire or problems with the TV caused by an increase in its internal temperature.
✎✎ When using a stand or wall-mount, use parts provided by Samsung Electronics only.
–– If you use parts provided by another manufacturer, it may cause a problem with the product or cause the product to fall, leading
to serious injury.
Installation with a stand.
Installation with a wall-mount.
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
Additional Information
✎✎ The appearance of the TV and its accessories may differ from the illustrations in this manual, depending on the TV.
✎✎ Be careful when you touch the TV if it is on or has been on for a period of time. Some parts can be hot.
Contents
yy Assembling the swivel................................................................................................................................................. 5
yy Installing the LED TV Stand........................................................................................................................................ 6
yy Assembling the Holder Wire Stand........................................................................................................................... 7
yy Using the TV's Controller............................................................................................................................................. 9
yy The Connection Panel................................................................................................................................................... 10
yy The Remote Control...................................................................................................................................................... 12
yy Connecting to the Network......................................................................................................................................... 14
yy Connecting the TV to an SBB or STB.......................................................................................................................... 16
yy Connecting the RJP (Remote Jack Pack).................................................................................................................. 19
yy Setting the Hotel Option Data.................................................................................................................................... 21
yy Installing the Wall Mount............................................................................................................................................ 45
yy Anti-theft Kensington Lock......................................................................................................................................... 47
yy Specifications................................................................................................................................................................. 48
yy Display Resolution........................................................................................................................................................ 49
yy Dimensions..................................................................................................................................................................... 50
Symbols Used in this Manual
t
TOOLS
Indicates that you can press the
TOOLS button on the remote
control to use this function.
NOTE
One-Touch Button
English
3
ENGLISH
yy Accessories..................................................................................................................................................................... 4
Accessories
✎✎ Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.
✎✎ The items’ color and shape may vary, depending on the model.
✎✎ The parts for the stand are listed under Stand Components on the following page.
List of Parts
4
Remote Control (AA59-00817A) &
Batteries (AAA x 2)
Power Cord
Safety Guide / Quick Setup Guide /
Regulatary Guide
(Not available in all locations)
Data Cable
(depending on the model)
(BN39-00865B, BN39-01011E)
Hotel Mount Kit
Holder-Wire stand (1EA)
English
Assembling the swivel
[[ WARNING:
If you configure the TV to swivel, you must attach it securely to the floor, a desk, a dresser top, etc. as
described in the installation instructions.
The LED TVs have swivel stands. You can configure these stands so that the TVs swivel 20 degrees left and right, 60
degrees left and right, or 90 degrees left and right using the BRACKET HOLDER SWIVEL.
* The product ships with its stand's swivel angle set to 20°.
* 20° swivel
To configure the TV so that it swivels 20° left and right, insert the prong on the bottom of the stand through the curved
hole in the Bracket Holder Swivel marked 20°. Then, fix the Bracket Holder Swivel to the stand using the three supplied
screws as shown below.
60° swivel
To configure the TV so that it swivels 60° left and right, insert the prong on the bottom of the stand through the curved
hole in the Bracket Holder Swivel marked 60°. Then, fix the Bracket Holder Swivel to the stand using the three supplied
screws as shown below.
90° swivel
To configure the TV so that it swivels 90° left and right, remove the Bracket Holder Swivel, and then screw the three
supplied screws into the stand as shown below.
English
5
Installing the LED TV Stand
Components
When installing the stand, use the provided components and parts.
A 1EA
B 1EA
C
D
Stand
Guide Stand
C
1
x4
(M4 X L12)
x8 (M4 X L12)
x4 (M4 X L12, SECURITY)
Screws
2
B
A
✎✎ Place a soft cloth over the table to protect the TV, and then
place the TV on the cloth screen-side down.
✎✎ Insert the Stand Guide into the slot on the bottom of the TV.
✎✎ Slide and assemble it to the end line in the direction of arrow.
Tight the bottom screw first, and upper screw last.
✎✎ Progress the assembly of screw in the manual’s order.
3
C
x4 (M4 X L12)
D
x4 (M4 X L12,
SECURITY)
4 When the declination happened, try reassemble it 2 category.
✎✎ Make sure to assembling stand guide attached on the TV.
✎✎ NOTE
–– Make sure to distinguish between the front and back of each component when assembling them.
–– Make sure that at least two persons lift and move the TV.
6
English
Assembling the Holder Wire Stand
English
7
Hotel Mount Kit
Short Bolt (2EA)
Long Bolt (2EA)
Washer (2EA)
Nut (2EA)
or
[[Affix the stand to a flat
surface such as a dresser top,
desk top, or entertainment
center as shown.
WARNING : To prevent injury, this apparatus must be securely attached to the floor/wall in accordance
with the installation instructions. Tipping, shaking, or rocking the machine may cause injury/death.
8
English
Using the TV's Controller
✎✎ The color and shape of the TV Controller may vary depending on the model.
✎✎ The TV's Controller, a small joy stick like button on the bottom right side of the TV, lets you control the TV without
the remote control.
Control Menu
: Power off
: Volume Up
: Channel Up
: Volume Down
: Channel Down
: Source
TV controller / Remote control sensor
Press: Move
Press & Hold: Select
The TV controller is placed at the bottom of the TV.
Standby mode
Your TV enters Standby mode when you turn it off, and continues to consume a small amount of electric power. To be safe
and to decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are away on
vacation, for example). It is best to unplug the power cord.
English
9
The Connection Panel
1
2
9
2
5
3
4
6
7
8
✎✎ Whenever you connect an external device to your TV, make sure that power on the TV and the device is turned off.
✎✎ When connecting an external device, match the color of the connection terminal to the cable.
1 USB (5V 0.5A), (HDD/1.0A) / CLONING)
–– Connector for software upgrades and Media Play, etc.
–– Service connection.
2 HDMI IN 1, 2 (ARC), 3
Connects to the HDMI jack of a device with an HDMI output.
✎✎ No separate sound connection is needed for an HDMI to HDMI connection. HDMI connections carry both audio
and video.
✎✎ It is recommended that the external device of the HDMI 1.3 or 1.4 version will be used with this TV. If you meet
the compatible problem like no sound or the abnormal screen or etc with the device of the HDMI 1.2 version,
contact to the Samsung customer care center. Refer to page 51 for the information of the Samsung customer
care center.
3 LAN
Connect to a wired LAN using CAT 7 cable.
4 ANT IN (AIR/CABLE)
–– To view television channels correctly, the TV must receive a signal from one of the following sources:
–– An outdoor antenna / A cable television system / A satellite receiver
5 EX-LINK
Connect this jack to the jack on the optional RJP (Remote Jack Pack). This will allow you to connect external devices
(Camcoder, PC, DVD players etc.) easily.
10
English
6 AUDIO OUT
Connects to the audio input jacks on an Amplifier/Home Theater.
7 COMPONENT / AV IN 1
–– Use to connect to Component video / audio devices such as DVD players and AV (Composite) devices such as
VCRs.
–– Connect audio cables to "R-AUDIO-L" on your TV and the other ends to corresponding audio out jacks on A/V or
Component devices.
–– The COMPONENT jack is also used as the VIDEO 1 jack.
–– Connect component video cables (not supplied) to the component jacks ("PR", "PB", "Y") on the rear of your TV
and the other ends to corresponding component video out jacks on a DVD player. Match the colors on the jacks
and cables.
–– If you want to connect both a Set-Top Box and a DVD player, you should connect the Set-Top Box to the DVD and
connect the DVD to the component jacks ("PR", "PB", "Y") on your TV.
–– The PR, PB and Y jacks on your component devices (DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.
–– For AV devices, connect RCA audio cables (not supplied) to "R - AUDIO - L" on the rear of the TV set and the other
ends to corresponding audio out jacks on an external device.
–– When your are connecting a composite (AV) device to AV IN 1 [Y/Video], connect the video cable (Yellow) to the
AV IN 1 [Y/VIDEO] jack (Green/Yellow) .
8 DIGITAL AUDIO OUT (OPTICAL)
Connects to a Digital Audio component.
9DATA
–– Used to support data communication between the TV and the SBB or STB.
–– Connects using RJ-12 TV type plugs.
English
11
The Remote Control
✎✎ This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually
impaired customers.
Turns the TV on and off.
Display and select the available video
sources.
Press to directly access channels.
Press to select additional digital
channels being broadcast by the same
station. For example, to select channel
‘54-3’, press ‘54’, then press '-' and ‘3’.
Adjust the volume.
Display the channel list on the screen.
Display the main on-screen menu.
Quickly select frequently used functions.
Return to the previous channel.
Cut off the sound temporarily.
Change channels.
Switch to the HOME Screen.
Displays My Contents, Watch TV and
Source icons on the TV screen.
Press to display channel and TV
information on the TV screen.
Select on-screen menu items and change
menu values.
Return to the previous menu.
SLEEP: Sets the Sleep Timer.
X: Turns the 3D function on or off.
(Not available)
CC: Controls the caption decoder.
12
English
Exit the menu.
Buttons used in Channel list, Media Play
menu, etc.
button: Enter the hour your want the
TV to turn on.
Use these buttons in the Media Play and
Anynet+ modes.
Installing batteries (Battery size: AAA)
Match the polarity of the batteries to the symbols in the battery compartment.
After you have installed the batteries, use a screwdriver to screw in the screw that holds the battery cover closed.
✎✎ NOTE
–– Use the remote control within 23 feet of the TV.
–– Bright light may affect the performance of the remote control. Avoid using near fluorescent lights or neon signs.
–– The color and shape of the remote may vary depending on the model.
English
13
Connecting to the Network
You can set up your TV so that it can access the SMART TV applications through your local area network (LAN) using a
wired or wireless connection.
✎✎ After you have “physically” connected your TV to your network, you must configure the network connection to
complete the process. You can configure the connection after the Initial Setup process, through the TV’s menu.
Network Connection - Wireless
Connect the TV to the Internet using a standard wireless router or modem.
Wireless IP Router or Modem
that has a DHCP Server
The LAN Port on the Wall
LAN Cable (Not Supplied)
Network Connection - Wireless
yy This Smart TV supports the IEEE 802.11a/b/g /n communication protocols. Samsung recommends using IEEE 802.11n.
Otherwise, when you play video over a network connection, the video may not play smoothly.
yy To use a wireless network, the TV must be connected to a wireless router or modem. If the wireless router supports
DHCP, the TV can use a DHCP or static IP address to connect to the wireless network.
yy Select a channel that is not currently in use for the wireless router. If the channel set for the wireless router is currently
being used by another device, the result is usually interference and/or a communications failure.
yy Most wireless networks have an optional security system. To enable a wireless network's security system, you need to
create a security key using characters and numbers, and then enter that key into the router through its menu. You then
must enter this security key into any other devices you want to connect to the wireless network.
Network Security Protocols
The TV only supports the following wireless network security protocols:
yy Authentication Modes: WEP, WPAPSK, WPA2PSK
yy Encryption Types: WEP, TKIP, AES
In compliance with the newest Wi-Fi certification specifications, Samsung TVs do not support WEP or TKIP security
encryption in networks running in the 802.11n mode.
If the wireless router supports WPS (Wi-Fi Protected Setup), you can connect the TV to your network using PBC (Push
Button Configuration) or a PIN (Personal Identification Number). WPS automatically configures the SSID and WPA key
settings.
Your Smart TV cannot connect to uncertified wireless routers.
14
English
Network Connection - Wired
There are three main ways to connect your TV to your network using cable, depending on your network setup. They are
illustrated below:
The Modem Port on the Wall
TV Rear Panel
External Modem
(ADSL / VDSL / Cable TV)
Modem Cable (Not Supplied)
LAN Cable (Not Supplied)
TV Rear Panel
The Modem Port on the Wall
External Modem
(ADSL / VDSL / Cable TV)
Modem Cable
(Not Supplied)
IP Router that has a
DHCP Server
LAN Cable
(Not Supplied)
LAN Cable
(Not Supplied)
TV Rear Panel
The LAN Port on the Wall
LAN Cable (Not Supplied)
✎✎ The TV does not support network speeds less than or equal to 10Mbps.
✎✎ Use Cat 7 cable for the connection.
English
15
Connecting the TV to an SBB or STB
TV Rear Panel
ETH MODEM
Data Cable
1. Connect the DATA jack of the TV to the ETH MODEM jack of the STB (SBB) with the Data cable.
✎✎ The "ETH MODEM" jack name that you connect the Data Cable to may differ depending on the SBB or STB type.
16
English
List of Hospitality SI Vendors and Compatible Data Cables Supplied with the TV
yy Confirm you are using the correct data cable for your SI vendor. Refer to the code label on the data cables.
yy Contact your nearest dealer or your SI Vendor to buy the data cable not included in the TV.
Note the labeled end.
Confirm the code on the
Code Label
SI Vendor
Cable code
Samsung
OCC
Enseo
Guest-Tek
BN39-00865B
NXTV
BN39-01011B
nStreams
BN39-01110A
Sonifi
BN39-01011E
Note the labeled end.
Pin assign
Remark
Provided
Provided
✎✎ Operation Specification of Data Cable(RJ12) : TTL
English
17
Connecting the Audio Output to an Audio Amplifier
TV Rear Panel
AUDIO IN
Audio
Amplifier
1 Stereo cable
1. Connect the AUDIO OUT port of the TV to the Audio In port of an audio amplifier with a stereo cable.
18
English
Connecting the RJP (Remote Jack Pack)
Connect the input jacks on the TV to the RJP. The RJP lets guests connect audio and video sources to the TV.
RJP Rear
USB
HDMI
S-VIDEO RCA
AUDIO/PC
RS/232
1 Video / Audio Cable
2 HDMI cable
3 RS-232 Data Cable
TV Rear Panel
1. Connect the COMPONENT IN [VIDEO] / [R-AUDIO-L] port of the TV to the RCA port of the RJP.
2. Connect the [HDMI] port of the TV to the HDMI port of the RJP.
3. Connect the EX-LINK port of the TV to the RS/232 port of the RJP.
✎✎ This Samsung TV is compatible with the TeleAdapt TA-7610 RJP only.
English
19
yy RJP (Remote Jack Pack): The RJP is a hardware module that has various Audio and Video inputs (A/V Video, A/V Audio,
PC and HDMI) and corresponding outputs. The corresponding outputs are connected from the RJP to the TV. The RJP
communicates with the TV via RS232. The RJP communicates with the TV by sending messages regarding Active/
Inactive sources.
–– A group of hotel menu items let you assign numbered priorities to the jacks of the RJP. 1 is the highest priority
and 3 is the lowest. When a guest connects external sources to the RJP jacks, the TV will automatically switch
between sources based on the priority you have assigned them in the Menu. For example, lets say AV is set to
1 and HDMI to 2. If a guest has attached a device to the HDMI jack, and then plugs a device into the AV jack, the
TV automatically switches to the device plugged into the AV jack (the jack with the higher priority). Note that a
guest can also switch between devices manually by pushing a button on the RJP.
yy To reset the RJP to its factory default state, press the AV and HDMI buttons simultaneously for 10 seconds. When all
button LEDs blink 5 times, the RJP reset is complete.
yy The RJP will automatically turn off any LEDs after 5 minutes to avoid unnecessary light pollution in the hotel room.
The LEDs that were turned off will turn on again if the guest touches any of the buttons and the 5 minute timer
will restart. If the guest then touches another source button, the TV will change to the selected source and the
corresponding LED will be lit.
yy After an RJP Reset or a TV Power OFF/ON, it takes approximately 10 seconds to establish communications between the
TV and the RJP.
yy The following table shows the approximate time in seconds it takes to switch from the TV to an input source, based on
assigned or default priorities.
✎✎ Scenario 1: When no inputs are connected.
Source
To Connect
AV
PC
HDMI
2 Sec
0.7 Sec
3.9 Sec
✎✎ Scenario 2: When two or more inputs are connected to the RJP and one of the input sources is disconnected and
then reconnected.
Source
Disconnect
To Connect
Total
AV
PC
HDMI
4.5 Sec
0.7 Sec
3.9 Sec
2 Sec
0.7 Sec
3.9 Sec
6.5 Sec
1.4 Sec
7.8 Sec
✎✎ An example: If the RJP has all its live sources (AV, PC, and HDMI) connected, AV has been assigned the highest
priority, the RJP is in HDMI mode, and a guest removes and reconnects the AV source, the minimum time
required to switch to the AV source is 6.5 seconds.
yy To play audio devices (Ipods, MP3 devices, etc.) through the RJP, you must turn Music Mode AV in the menu on.
yy Music mode in the TA-7610 RJP is supported by the AV jack only. HDMI Music mode is available for the Guestlink RJP
only.
20
English
Setting the Hotel Option Data
To let you control how the TV functions when in Hotel mode, the TV has two Hotel mode menus, the Stand-alone mode
menu and the Interactive mode menu. The menu items that differ between the modes are listed below.
Menu items in the Stand-alone mode only:
–– SI Vendor : Smoovie
–– REACH Server and its submenus.
Menu items in the Interactive mode only:
–– SI Vendor: Samsung and other vendors.
All other items appear in both modes.
To access the menus, press MUTE → 1 → 1 → 9 → ENTERE on your Samsung remote.
After a menu appears, follow these general directions to navigate and change values:
–– Use the Up and Down arrow buttons on the Samsung remote to move from menu item to menu item.
–– Press the ENTERE or Left or Right arrow buttons to select a menu item. The screen displays that menu item
only.
–– Press the Left or Right arrow button to change a value. The Right arrow button increases numerical values. The
Left arrow button decreases numerical values.
–– When the screen is displaying one menu item, you can press the Up or Down arrow button to display the next or
previous menu item.
–– Press the RETURN or MENU button to exit the current menu item and go to a higher menu level or the Main
menu.
–– To exit a Hotel mode menu, turn off the TV, and then turn it on again. Any changes you made are saved except
changes to SI Vendor. For changes to SI Vendor, you must turn the TV off, wait until the Standby light glows
steadily, then unplug the TV, wait for the Standby LED to go off, and then plug the TV in again.
Hospitality Mode
Standalone
Widget Solution
SI Vendor
OFF
Virtual Standby
Power On
Security Mode
Channel
DRM
Menu OSD
System
Clock
Music Mode
Remote Jack Pack
External Source
Bathroom Speaker
Eco Solution
Logo/Message
Cloning
REACH Solution
Network
Above: The Hotel mode menu
To change menus between the interactive mode and the standalone mode, follow the steps below :
1. Highlight the Hospitality Mode menu item in the top left corner of the menu.
2. Press the left or right arrow button on the Samsung remote. Only the Hospitality Mode menu item is displayed.
3. Press the left or right arrow button to change the Hospitality Mode item from Standalone to Interactive or from
Interactive to Standalone.
4. Press the Return or Menu button on the remote. The entire menu re-appears with your selection displayed in the
Hospitality Mode field.
✎✎ After you have set the values in one TV, you can clone those values to multiple TVs. See USB Cloning on page
30.
English
21
Menu Items
To Enter this menu: Press the MUTE → 1 → 1 → 9 → ENTERE buttons in order.
To exit from this menu: Power Off (or Power Off and unplug if you have changed SI Vendor), and then turn on again. Any
changes you made are saved.
✎✎ The menu item does not support depending on the models.
Hotel TV Function
Category
Item
Hospitality
Mode
Hospitality Mode
SI Vendor
SI Vendor
Power On Channel
Description
Select Hospitality mode.
yy Interactive mode: TV works with an SI STB or SBB.
yy Standalone mode : TV works alone, without an SI STB or SBB.
yy Interactive mode: Samsung / OCC / MTI / Nstreams / Enseo / Cardinal / Guestek / SeaChange /
MDC / Innvue
yy Standalone mode: OFF / Smoovie / SSCP
Set the default values that will be applied when the TV is turned.
yy User Defined: Lets you set Power On Channel and Channel Type manually. See Power On
Channel and Channel Type below.
yy Last Saved: If you select this item, when the TV is turned on, it displays the channel it was
displaying when it was turned off.
Power On Channel Num When the TV is turned on, it switches automatically to this channel.
yy Select channel band: AIR (analog air band), DTV (digital air band), CATV (analog cable band),
CDTV (digital cable band).
yy User Defined: Lets you set the Power On Volume manually. See Power On Volume below.
Power On Volume
yy Last Saved: When the TV is turned on, it returns to the volume that had been set when the
power had been turned off.
Power On Volume Num The TV turns on with this Volume Level in Stand Alone Hospitality mode.
Power On Channel Type
Power On
Min Volume
The minimum Volume Level the user can set in Stand Alone Hospitality mode.
Max Volume
The maximum Volume Level the user in Stand Alone Hospitality mode.
Power On Source
Power On Option
Channel Setup
Channel Editor
Channel
Mixed Channel Map
Dynamic SI
Mychannel
Genre Editor
22
English
Select the input source the TV displays when turns on.
Determines the TV's state when power returns after a power failure or after you have unplugged
the TV and then plugged it in again.
yy Last Option: Returns to its last Power state. If it was in Stand-by, it returns to Standby. If it was
on, it turns on.
yy Power ON: When the power returns, the TV turns on.
yy Standby: When the power returns, the TV enters the Standby mode.
Gives you direct, immediate access to some of the Channel menu functions on the user Channel
menu such as Auto Program, Antenna selection, etc.
The Channel Editor lets you edit the channels stored in the TV's memory. Using Channel Editor
you can:
yy Change the channel numbers and names, and sort the channels in your desired channel
number order.
yy Apply the video mute to channels you select. The video mute blanks out the video from a
channel and outputs only the sound while displaying a speaker icon on the screen.
The Channel Editor also lets you view information about each channel easily, without your
having to display each channel directly.
This Feature enables showing/browsing all antenna type (Air/Cable or Satellite) channels at the
same time.
yy ON: When ON, guests can access the complete Channel Map irrespective of the selected
antenna type. The Channel list will also populate Air as well Cable type channels.
yy OFF: When OFF, guest can access the Channel Map corresponding to the selected antenna type
[AIR/CABLE or Satellite] only. The Channel list/Editor will only show the selected antenna type
channels.
yy ON: Check the DTV Programme channel number. (the TV channel editor is inaccessible)
yy OFF: Do not check the DTV Programme channel number. (the DTV channel editor is accessible,
but additional channel Programme number update is not supported)
Enable or disable the My Channel feature.
Edith the genre for channels. (Available when My Channel is On)
Hotel TV Function
Category
Description
Item
Picture Menu Lock
Enable or disable the Picture Menu.
yy ON: The Main Menu is displayed.
yy OFF: The Main Menu is not displayed.
yy ON: The Tools Menu is displayed.
Tools Display
yy OFF: The Tools Menu is not displayed.
yy OFF:The Home Menu is not displayed.
Channel Menu Display
yy ON:The Home Menu is displayed.
Turning the front panel (local key) operations on/off.
yy Unlock: Unlocks all panel keys.
Panel Button Lock
yy Lock: Locks all panel keys.
yy OnlyPower: Locks all panel keys except the Power panel key.
yy OFF:The Home Menu is not displayed.
Home Menu Display
yy ON:The Home Menu is displayed.
Home Menu Editor
Edit Home Menu .
yy ON:The Home Menu is Auto Start.
Home Menu Auto Start
yy OFF:The Home Menu is not Auto Start.
yy OFF: The feature of SW Clock becomes not available.
yy SW Clock: If this item is selected and a user presses the INFO key of the remote twice
Clock Type
consecutively in the standby mode of TV, the clock information is displayed in the screen of TV
and then TV is turned off automatically.
Select the way to update the clock data
yy Manual: The clock is set automatically from the DTV channel or manually by the user when the
Local Time
TV is in stand-alone mode.
yy Time Channel: The clock is set from the selected channel.
Enable or disable the alarm function.
Timer Type
yy WakeUp : Enable the alarm function to turn on the device at the specified time.
yy OnOff : Disable the Alarm function.
Allows music output from an mp3/audio player connected to an AV Input Source on the TV.
When on, you can hear sound from the player through the TV whether there is a video signal or
Music Mode AV
not. Also mutes the video so the TV does not display a picture when a guest is playing music. The
TV's backlight, however, remains on.
Allows music output from an mp3/audio player connected to an Component Input Source on the
TV. When on, you can hear sound from the player through the TV whether there is a video signal
Music Mode Comp
or not. Also mutes the video so the TV does not display a picture when a guest is playing music.
The TV's backlight, however, remains on.
When set to Off, the TV's backlight is turned off entirely when a guest uses the Music mode. To
Music Mode Backlight
save energy, set to Off.
Lets you set the priority of the 7610 RJP AV jack. You can choose 1, 2, or 3, with 1 being the
highest and 3 the lowest. The TV automatically displays the source with the higher priority. For
example, lets say AV is set to 1 and HDMI is set to 2. If a guest has attached a device to the HDMI
Priority AV
jack, and then plugs a device into the AV jack, the TV will automatically switch to the device
plugged into the AV jack (the jack with the higher priority). Note that a guest can also switch
devices manually by pushing a button on the 7610 RJP.
Lets you set the priority of the 7610 RJP HDMI jack. You can choose 1, 2, or 3, with 1 being the
Priority HDMI
highest and 3 the lowest. The TV automatically displays the source with the higher priority. See
above for a more detailed explanation.
AV Option
Select which AV source of the TV is connected to the RJP jack.
HDMI Option
Select which HDMI source of the TV is connected to the RJP jack. (HDMI1/HDMI2/HDMI3)
Allows music output from an mp3/audio player connected to an HDMI Input Source.
HDMI Music Mode
When on, you can hear sound from the player through an HDMI input of the RJP whether there is
a video signal or not. (This option is only compatible with the Guest link RJP.)
Menu Display
Menu OSD
Clock
Music Mode
Remote Jack
Pack
English
23
Hotel TV Function
Category
External
Source
Bathroom
Speaker
Eco Solution
Description
Item
When USB is connected to the TV :
yy Default: a popup window appears.
USB Pop-up Screen
yy Automatic: This enters the USB content menu automatically.
yy Disable: Neither the popup window nor the menu appears.
If set to On, the TV displays the External Source Banner (information) when you change the TV
source to another external input, press the Info key, or turn the TV on.
External Source Banner
yy ON: The External Source information is displayed on the TV screen.
yy OFF: The External Source information is not displayed on the TV screen.
yy ON: When an external input source is connected to the TV, the TV identifies the input source,
and then automatically switches to that input source.
Auto Source
yy OFF: Auto Source function is Off.
Select the return TV source after stopping an Anynet+(HDMI-CEC) connection. (This fuction is
Anynet+ Return Source
especially useful for the Guestlink RJP.)
Determines the Bathroom Speaker sound AMP operation mode.
yy 0: Turns the Bathroom Speaker sound AMP function off (PWM off).
yy 1: The Bathroom Speaker sound volume follows the TV speaker sound volume identically. The
Sub Amp Mode
Bathroom Speaker sound volume is controlled by the TV remote or panel keys.
yy 2: The Bathroom Speaker sound volume is controlled by the Bathroom Speaker volume
controller.
Sub Amp Volume
The initial Bathroom Speaker sound volume after TV is turned on.
Adjusts the brightness of the TV to reduce power consumption.
yy OFF: Turns off the energy saving function.
Energy Saving
yy Low: Sets the TV to low energy saving mode.
yy Medium: Sets the TV to medium energy saving mode.
yy High: Sets the TV to high energy saving mode.
Welcome Message
Displays a the Welcome Message for 5 seconds when the TV turns On.
Edit Welcome Message Edits the Welcome Message.
Hospitality Logo
Logo/Message
Hospitality Logo DL
Logo Display Time
Cloning
English
Hospitality Logo Display Time (3/5/7 seconds).
Clone TV to USB
Clone the current TV options to a USB memory device.
Clone USB to TV
Clone the saved TV options on a USB memory device to the TV.
Setting Auto Initialize
24
Turns the Hospitality logo feature OFF, BMP, AVI, BOTH. If not OFF, when the TV is turned on, the
Logo is displayed, before the signal from the initial source, for the amount of time set in “Logo
Display Time”.
Downloads the Hospitality logo.
Hospitality logo file requirements:
yy BMP or AVI files only.
yy Max file size: BMP - 960 X 540. AVI - 30MB.
yy The file can only be named samsung.bmp or samsung.avi.
If you set Setting Auto Initialize to On, and the TV's power is turned off and on, TV menu items
are restored again to their values cloned initially.
Hotel TV Function
Category
Description
Item
REACH IP Mode
yy ON: The feature of REACH in this TV becomes available.
yy OFF: The feature of REACH in this TV becomes not available.
If enabled, Reach will work over IP instead of RF.
Server IP Setting
The URL of the Reach IP server, for example https:\\192.168.1.2:443.
REACH
Assign a DTV channel number to carry the update REACH data. This channel number must be the
same as the number set on the Reach server.
Lets you set when data such as updated SW, cloning files, and S-LYNC REACH contents is
downloaded from the REACH server to the TV :
yy 1hour: Every hour
yy 2hour: Every 2 hours
REACH Update Time
yy 12:00 am: every 12:00 a.m.
yy 2:00 am: every 2:00 a.m.
yy 12:00 pm: every 12:00 p.m.
yy 2:00 pm: every 2:00 p.m.
yy ON: Whenever the TV enters standby mode (the power cord is plugged in and the power is off),
REACH Update
the REACH data is updated on the TV.
Immediate
yy OFF: The REACH data is only updated on the TV at the REACH server update time.
Group ID
Select the group ID of the REACH server. (Refer to the REACH server manual for more details)
Room Number
Set the room number
Selects the IPG room type of the REACH server. (Refer to the REACH server manual for the more
IPG Room Type
information.)
REACH Config Version The version of REACH is displayed.
If this item is entered into, network setup menu is displayed. The network setup menu is used
for setting network like access internet.
Soft AP: Using this function, you can connect the TV on your mobile devices. Set the options for
connection of Wi-Fi device.
yy Soft AP: Turns on or off the Soft AP. When Soft AP is set to On, your mobile devices can find the
TV name in Wi-Fi connection list.
yy Security key: Set a security key that you need to enter on other devices so they can connect to
the TV.
Network Setup
–– Input the generated security key into the device you want to connect.
–– If network does not operate normally,check the security key again. An incorrect
security key may cause a malfunction.
✎✎ Soft AP may not be available if it is not supported by the model.
✎✎ Maximum number of devices that can be connected: 4 devices.
✎✎ Bitrate : 10 Mbps/device.
✎✎ The specifications above are based on our in-house testing. Actual performance may vary
depending on your wired/wireless network environment.
SmartHub Model
Set SmartHub Model.
Setting
REACH Channel
REACH
Solution
Network
SmartHub Setting
Set up SmartHub.
Service Discovery
Can use this feature to enable Service Discovery Features like DLNA.
Create separate VLAN groups. A 3-digit number can be entered between 1 and 255 for the VLAN
ID.
When VLAN is used, set a VLAN ID to be assigned to a Solution (such as SYNC, H.Browser etc.).
VLAN ID
Solution VLAN ID
Device VLAN ID
Set a VLAN ID to be assigned to external devices connected to the LAN OUT port.
English
25
Hotel TV Function
Category
Widget
Solution
Item
Widget Mode
yy ON: The TV mode is changed to the Widget mode that TV accesses to the hospitality server
through IP connection and the guest uses various services and features through Widget of TV
yy OFF: The TV mode becomes normal the hospitality mode.
Solution Type
Select the type of the solution server installed in your site for the widget service.
yy Vendor Server: In the case of that the special SI vendor of the server is installed in your site.
yy SINC Server: In the case of that the Samsung SINC server is installed in your site.
Server URL Setting
License Server IP
Setting
IPTV Mode
Room Num Setting
Virtual
Standby
Virtual Standby Mode
Reboot Time
Factory Lock
Password Popup
Password Input
Security Mode
Password Setting
Password Reset
Security Mode
USB
HDMI
DRM Mode
DRM
PI AES Data
PI AES Log
View PI AES Log
26
English
Description
If this item is entered into, URL of the solution server can be inputted.
If this item is entered into, URL of the license server can be inputted.
yy ON: The IPTV mode that watches the broadcasting through the IP network is enable.
yy OFF: The IPTV mode is not disable
Set the room number
TV can supply the main feature in the standby mode if The TV mode is set to the Virtual Standby
mode.
yy ON: The Virtual Standby mode is enable.
yy OFF: The Virtual Standby mode is disable.
When Virtual Standby is On, TV power consumption will be 9.5W to 17.4W (Depending on ithe size
of the TV screen).
This Feature can set the Reboot interval of TV after TV enters Virtual standby Mode.
Delete Device List in when power on or off.
yy ON: The password is needed before entering factory menu.
yy OFF: disable this feature.
Enable/disable Password Popup. If this option is set to OFF, the TV will not display the password
input popup window when entering the Factory menu. If set to ON, the password input popup
window appears.
If this option is enabled, a popup input box appears which asks for an 8-character security
password. The admin must enter a password before applying or updating security preferences.
After the correct password is entered, options such as Password Setting, Password Reset and
Security Mode are available.
User can change the password.
Password is reset to "00000000".
Security Mode provides password protected administrative functionality to enable or disable
features of Hospitality TV, such as HDMI, USB and TTX. Use this option to turn security mode
on or off. After turning on security mode, options such as "USB," "HDMI" and "TTX Security” are
automatically enabled in the security sub-menu. “USB to TV cloning” and “TV Reset” will be
disabled in the Hospitality Menu.
Enable/disable USB access. When disabled, access to USB media is blocked.
Enable/disable HDMI access. If disabled, Anynet, HDMI source, HDMI type External Channels will
not be accessible to the user.
Configures DRM support.
OFF: Turns off DRM support.
LYNK DRM: Select to turn on S-LYNK DRM CAS support only.
Pro:idiom: Select to turn on Pro:Idim CAS support only.
LYNK DRM,PI: Select to have the TV support S-LYNK DRM CAS and Pro:Idiom CAS.
Displays the current state of Pro:Idion AES
yy ON: Output of Pro:Idiom AES log is enable.
yy OFF: Output of Pro:Idiom AES log is disable.
If this item is entered into, the Pro:Idiom AES log is displayed.
Hotel TV Function
Category
System
Item
Description
yy Enter Self Diagnosis Menu.
Picture Test: Use to check for picture problems. If the problem appears in the test picture,
Self Diagnosis
select Yes and follow the directions on the screen.
for TV
yy Sound Test: Use the built-in melody sound to check for sound problems. If the problem occurs
during the test, select Yes and follow the directions on the screen.
Lets you check the state of Pro:Idiom and its communication with the SI STB or SBB. If you have
any problems with the Pro:idiom encryption channel or the communications with the SI STB or
SBB, use this diagnosis function. If Pro:Idiom DTV Channel Key Loss appears to have failed and
the Pro:Idim encryption channel has failed to play content, first check the broadcasting systems
Self Diagnosis for HTV
related to Pro:Idiom encryption. If your broadcasting system does not have a problem, contact
Samsung Service. If STB SI Vendor Setting appears to have failed and communication with the
SI STB or SBB has failed, first check your SI STB or SBB. If your SI STB or SBB does not have a
problem, contact to Samsung Service.
SW Update
Lets you upgrade the TV SW with a USB memory stick.
Lets you check the state of the TV picture by displaying picture test patterns. Press the Menu
Service Pattern
button to turn off the test patterns and exit.
Lets you control the AGC gain of the analog cable channels. Don't change the default value
ATV Cable AGC Gain
unless problems occur.
DTV OpenCable AGC Lets you control the AGC gain of the digital cable channels. Don't change the default value
Gain
unless problems occur.
If the Samsung Sound Bar device is connected to this TV, this item lets you to select where the
TV sound is outputted when the TV is turned on.
yy ON: When the TV is turned on, the TV sound is automatically outputted in the Sound Bar device
Sound Bar Out
only.
yy OFF: When the TV is turned on, the TV sound is automatically outputted in the TV speaker
device only.
Display the web site of related Samsung service center, software version, and Mac address
Contact Samsung
information.
When the TV is in standby mode, you can configure the settings of external LED.
yy ON: The LED is on.
Standby LED
yy OFF: The LED is off.
TV Reset
Returns all settings on the TV to their factory defaults.
✎✎ REACH (Remote Enhanced Active Control for Hospitality) is a professional, interactive remote controller that lets
you deliver TV firmware updates, cloning data, channel mapping changes, REACH contents, and TICKER contents
through RF DTV to several hundred hospitality TVs simultaneously. The REACH functions are available only in
standalone mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed with the
REACH server product for more operating information.
English
27
Welcome Message
The Welcome Message feature displays a custom message on the TV every time it is turned on.
–– Welcome message settings are in the Hotel Option Menu.
–– Set Welcome Message to ON to display the message when the TV is powered on.
Welcome Message
OFF
Edit Welcome Message
Hospitality Logo
OFF
Hospitality Logo DL
...
Logo Display Time
...
–– You can make the Welcome Message up to 25 characters long and edit it in the Hotel Service menu.
–– Welcome Message supports the following characters:
✎✎ Capital Letters from A to Z.
–– You can edit the Welcome Message by using the remote's navigation, color, and Enter buttons in the “Edit
Welcome Message” OSD (See the illustration below.)
Edit Welcome Message
W
E
L
R
AB
C
H
C
O
O
D
M
T
E
E
E
T
L
F
O
a Move to Left
b Move to Right
O PQ R S TU
X
Y
U
G
H I J K L MN
VW
O
_
{ Leave Black
} Done
Z
Move Enter
Return
Below are the general directions for navigating and changing letters on the Edit Welcome Message screen:
–– Press the a button on the remote to move to the left in the message.
–– Press the b button to move to the right.
–– After you have selected a position in the message, use the arrow buttons on your remote to select a letter in the
alphabet below the message.
–– Press Enter to place a letter into the position you selected.
–– Press the { button to erase a letter in a position or enter a blank.
–– Press Return or the } button to exit.
28
English
Hotel Logo
The Hospitality Logo function displays the Hotel's picture image when the TV is powered on.
–– Hospitality Logo settings are the Hotel mode menus.
–– The Logo Download and Logo Display Menu items are enabled when you turn the Hospitality Logo option on.
–– If there is a logo image stored in memory and the Hospitality Logo option is on, the Hospitality logo is displayed
when the TV is turned on.
–– The Hospitality logo is not displayed when the Hospitality found Logo option is off, even if the logo image has
been loaded into the TV.
Hospitality Mode
SI Vendor
Standalone
Widget Solution
OFF
Virtual Standby
Power On
Security Mode
Channel
DRM
MyChannel
System
Menu OSD
Welcome Message
Clock
Music Mode
Remote Jack Pack
ON
Edit Welcome Message
r
External Source
Bathroom Speaker
Hospitality Logo
ON
Hospitality Logo DL
...
Logo Display Time
...
Eco Solution
Logo/Message
Cloning
REACH Solution
Network
yy Hospitality Logo
–– This option lets you choose whether the Hospitality Logo image is displayed or not.
–– Initial value is OFF.
–– Can be set to BMP, AVI, BOTH.
–– When set to BMP, AVI, BOTH, the Logo Download and Logo Time Display menu items become accessible.
yy Logo Download
–– This option lets you download the logo image to the TV’s memory from a USB device.
–– A wait message appears while the image is being copied to the TV.
–– A "completed" message appears when the copy operation finishes successfully.
–– The word "failed" appears if the copy operation was unsuccessful.
–– No USB appears if no USB device is connected.
–– No File appears if there is no file to copy on the USB device or the file is in the wrong format (must be a BMP or
AVI file). If No File appears and there is a logo file on the USB device, check the file format.
yy Logo File Format
–– The TV supports only BMP and AVI format.
–– The file name must be samsung.bmp or samsung.avi.
–– The maximum resolution of the BMP format is 960 x 540.
–– The maximum file size for AVI format is 30MB.
–– The TV does not change the size or scale of the image.
English
29
USB Cloning
The USB Cloning function lets you download user-configured settings (Picture, Sound, Input, Channel, Setup, and Hotel
Setup) from one TV to a USB device, and then upload these settings from the USB device to other TV sets. This lets you
create a standard file of settings and distribute that standard file to all the TVs in your facility.
✎✎ After cloning, certain features are applied when the TV is turned on again.
yy Cloning TV to USB: Copies stored menu settings from a TV to a USB device.
1. Insert a USB drive into the USB port on the rear of the TV.
2. Enter the hotel option menu by pressing buttons in order.
MUTE → 1 → 1 → 9 → ENTERE
3. Press the ▲ or ▼ button to select Cl one:TV to USB, and press the
ENTERE button.
4. When the message Clone: TV to USB is displayed. Press the ENTERE
button.
5. The TV displays one of the following messages:
yy In Progress: Copying data to USB.
yy Completed: Copy was successful.
yy Failed: Copy was not successful.
yy No USB: USB is not connected.
The clone folder will be labeled T-MST14AKUCB.
Clone TV to USB
Clone USB to TV
Setting Auto Initialize
OFF
✎✎ The cloned values include the values on the Guest side menu
(brightness, picture size, contrast, etc.) and the Hotel side menu.
Cloning USB to TV: Copies menu settings in a USB device to a TV.
✎✎ Shortcut: Turn the TV off, insert the USB device, turn the TV on, and then press the ENTERE button for 5 seconds.
To clone data to the TV using the Hotel menu, follow these steps:
1. Turn the TV off.
Clone TV to USB
2. Insert the USB drive into the USB port on the rear of the TV.
Clone USB to TV
3. Turn the TV on.
Setting Auto Initialize
OFF
4. Enter the Interactive menu by pressing these buttons in order.
MUTE → 1 → 1 → 9 → ENTERE
5. Press the ▲ or ▼ button to select “Clone USB to TV”, and then press the
ENTERE button.
6. The message Clone: USB to TV is displayed. Press the ENTERE button.
7. The TV displays one of the following messages:
yy In Progress: Copying data to TV.
yy Completed: Copy was successful.
yy Failed: Copy was not successful.
yy No USB: USB is not connected
yy No File: There is no file to copy on the USB device. If you get a No File message, check the folder on your USB device.
The folder name should be T-MST14AKUCB.
✎✎ Tables that list the settings that are cloned in the Interactive and Standalone Hotel Menus begin on the next
page.
Pre-condition for cloning (check point)
–– Cloning should be done between same model (same version).
–– Before cloning, all displays should be updated at the latest version (same version).
30
English
Settings Cloned in the Hotel Menu
✎✎ The menu item does not support depending on the models.
Menu Item
Cloning Support
Hospitality Mode
Yes
SI Vendor
Yes
Power On Channel
Yes
Power On Channel Num
Yes
Power On Channel Type
Yes
Power On Volume
Yes
Power On Volume Num
Yes
Min Volume
Yes
Max Volume
Yes
Power On Source
Yes
Power On Option
Yes
Channel Setup
N/A
Channel Editor
N/A
Channel Bank Editor
N/A
Channel Bank Service Level
Yes
Mixed Channel Map
Yes
Dynamic SI
Yes
Channel Rescan Message
Yes
Pan Euro MHEG
Yes
Channel Auto Store
N/A
Mychannel
Yes
Genre Editor
N/A
Mute On CC
Yes
Subtitle Auto On
Yes
TTX Widescreen Mode
Yes
Picture Menu Lock
Yes
Menu Display
Yes
Tools Display
Yes
Channel Menu Display
Yes
Panel Button Lock
Yes
Home Menu Display
Yes
Home Menu Editor
N/A
Home Menu Auto Start
Yes
Gallery Mode Editor
N/A
Bluetooth Music Player
Yes
Clock Type
Yes
Local Time
Yes
Time Format
Yes
Clock Test
N/A
Clock Normal Dim.
Yes
Clock Standby Dim.
Yes
Timer Type
Yes
Time Channel Type
Yes
Time Channel Num
Yes
Music Mode AV
Yes
English
31
Menu Item
Cloning Support
Music Mode PC
Yes
Music Mode Comp.
Yes
Music Mode Backlight
Yes
Priority AV
Yes
Priority PC
Yes
Priority HDMI
Yes
AV Option
Yes
HDMI Option
Yes
HDMI Music Mode
Yes
Video Out
Yes
USB Pop-up Screen
Yes
External Source Banner
Yes
Auto source
Yes
Anynet+Return Source
Yes
HP Mode
Yes
Default HP Volume
Yes
Main Speaker
Yes
Sub Amp Mode
Yes
Sub Amp Volume
Yes
Pillow Speaker Type
Yes
Speaker Select
Yes
Pillow Volume
Yes
Energy saving
Yes
Energey Saving Timer
Yes
Welcome Message
Yes
Edit Welcome Message
N/A
Hospitality Logo
Yes
Hospitality Logo DL
N/A
Logo Display Time
Yes
Clone TV to USB
N/A
Clone USB to TV
N/A
Setting Auto Initialize
Yes
REACH 3.0
Yes
REACH 2.0
Yes
REACH Channel
Yes
Group ID
N/A
IPG Room Type
Yes
Ticker
Yes
REACH Update Time
Yes
REACH Update Immediate
Yes
Room Number
N/A
REACH 2.0 TV Sound
Yes
REACH Server Version
N/A
Network Setup
N/A
SmartHub Model Setting
N/A
SmartHub Setting
N/A
32
English
Menu Item
Cloning Support
Widget Mode
Yes
Solution Type
Yes
Server URL Setting
N/A
License Server IP Setting
N/A
IPTV Mode
Yes
Virtual Standby
Yes
Instant On
Yes
Room Num Setting
N/A
Widget Resolution
Yes
PHY Sleep Mode
Yes
MDC ID Settings
Yes
TV Version
Yes
Door Eye Mode
Yes
Door Eye Source
Yes
Prompt OSD
Yes
Source Return Time
Yes
Password Input
N/A
Password Setting
N/A
Password Reset
N/A
Security Mode
Yes
USB
Yes
HDMI
Yes
TTX Security
Yes
DRM Mode
Yes
PI AES Data
N/A
PI AES Log
Yes
View PI AES Log
N/A
Self Diagnosis for TV
Self Diagnosis for HTV
Yes
PI DTV Channel Key Loss
N/A
STB SI Vendor Setting
N/A
Bathroom AMP
N/A
RTC
N/A
SW Update
N/A
Service Pattern
Yes
ATV Cable AGC Gain
Yes
DTV Open Cable AGC Gain
Yes
Sound Bar Out
Yes
Contact Samsung
N/A
Standby LED
Yes
TV reset
N/A
English
33
Multi Code Remocon
A Multi Code Remocon is a special remote which is designed to control multiple TVs.
This function is useful where there is more than one TV in a location.
You can control up to 10 TVs with a different ID code of each remote with no conflicts between the TVs. ID numbers are
displayed on each TV's OSD.
The Initial ID code for each TV is “0”.
–– You can set and reset the ID code in Analog TV mode or PC mode. (Not available in DTV mode.)
–– You can set the ID code to any digit from 0 to 9.
–– To set a TV's ID code, follow these steps:
1. Aim the remote at the TV, and then press the MUTE button and the RETURN button simultaneously for more
than 7 seconds. When you stop pressing the buttons, the TV displays the current ID in the middle of the screen
and the words, "Remote control code is set to 0. If you want to change the Remote control code, enter the digit
you want to change."
2. Press the number on the remote you want to assign to the TV. The TV displays the following words:
"Remote control code is changed to x."
✎✎ The TV will display the OSD until you press the EXIT button.
See the example below.
Remote control code is set to 0. If you want to
change Remote control code, enter the digit you
want to change.
Example: After you see the message above, if you press 1, the TV and Remote will be set to ID code 1. The TV then
displays the following message: “Remote control code is changed to 1”
The TV can then only be controlled by a remote which has the same ID code (1).
–– To reset the ID code, press the MUTE button and the EXIT button simultaneously for more than 7 seconds. When
you stop pressing the buttons, the ID codes of the TV and Remote are reset to “0”. “Remote control code is set to
0.” appears on the TV
34
English
Setting Auto Initialize
When you clone settings from one TV to another, you clone both the guest side menu and hotel side menu settings:
Picture, Sound, Input, Channel, Setup, and Hotel Setup. This lets you set nearly all of the menu values on your hospitality
TVs to the same, standard settings. If you allow guests access to the guest side menus, for example the Picture menu,
they can change the settings in those menus so they are no longer standard. If you set the Setting Auto Initialize function
to on the TV automatically restores (initializes) any guest-side menu values to the cloned, standard values when the TV
is turned off and then turned on again. Note that Setting Auto Initialize works on cloned guest side menu values only.
Settings which have not been cloned are ignored.
The table below lists the settings that are restored to their cloned values when you set the Setting Auto Initialize function to On.
✎✎ The menu item does not support depending on the models.
Menu
Picture
Sound
Menu Item
Picture Mode
Back light
Contrast
Brightness
Sharpness
Color
Tint (G/R)
Apply Picture Mode
Picture Size
Picture Size
Position
PIP
Advanced Settings
Dynamic Contrast
Black Tone
Flesh Tone
RGB Only Mode
Color Space
White Balance
Gamma
Motion Lighting
Picture Options
Color Tone
Digital Clean View
MPEG Noise Filter
HDMI Black Level
Film Mode
LED Clear Motion
Picture Off
Reset Picture
Sound Mode
Sound Effect
DTS TruSurround HD
DTS TruDialog
Equalizer
Speaker Settings
TV Sound Output
TV Installation Type
Samsung Device List
Add New Device
Additional Settings
Audio Format
Audio Delay
Digital Dolby Comp
Auto Volume
Reset Sound
Menu
System
Menu Item
Accessibility
Voice Guide
Video Desciption
Caption
Menu Transparency
High Contrast
Enlarge
Menu Language
Smart Control Settings
Motion Sensitivity
Touch Sensitivity
Onscreen Remote Size
Voice Control
Language
TV Voice
Voice Gender
Device Manager
Keyboard Settings
Mouse Settings
Time
Clock
Sleep Timer
Wake-up Timer
OnTimer 1
OnTimer 2
OnTimer 3
Eco Solution
Energy Saving
Eco Sensor
No Signal Power Off
Auto Power Off
Smart Security
Smart Security
Scan
Isolated List
Allowed List
Settings
Auto Protection Time
Change PIN
General
Game Mode
Sound Feedback
Boot Logo
Samsung Instant ON
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC)
Auto Turn Off
Device search
DivX® Video On Demand
English
35
Hotel Plug & Play
The Hotel Plug & Play function, which automatically performs the Hotel mode selection, Country Setup, Clock Setup, and
Picture Mode Setup, runs once, when power is first turned ON. Setup also runs automatically after you have executed a
Service Reset.
yy UI Scenario
If you select Factory Reset, the TV resets all values to their
factory defaults and then displays the Hospital Plug & Play
menu. Go to the first Hospital Plug & Play screen below.
Self Diagnosis for TV
Self Diagnosis for HTV
SW Update
Service Pattern
OFF
ATV Cable AGC Gain
Default
DTV OpenCable AGC Gain
Default
Sound Bar Out
OFF
Contact Samsung
Standby LED
ON
TV Reset
E+P
If you change the
country of the
Current Location
The TV is automatically
turned off and on.
E
If you don't change the country
of the Current Location
If you select
Cloning Mode
Copy the system settings from the USB or server
to the TV.
E
If you select
TV Basic
Setup
If you select
Factory Menu
E
End setup and go to Factory
Menu directly.
E
E
Select your language
E
E
Select Picture mode
Select the channel band
to use for Auto Program
05
E
Auto Program
Auto Program is finding channels for you...
DTV Air 4
40%
DTV Air
Air
DTV Cable
Cable
Press Power OFF to exit.
After Searching
channels.
E
E
Setup Complete!
Your TV is now ready to use.
Hotel Option Menu
appears.
E
E
Done
Select Clock Mode, DST, and your
Time Zone
36
English
yy LocalSet
–– Initially highlighted: US
–– If you press the Enter key after selecting Change, you can change the country.
–– If the country is changed, the TV automatically turns off and on.
–– If you select the incorrect country, execute TV Reset again after entering the System section of the Hotel Menu.
yy Menu Language OSD
–– If you select TV Basic Setup from the "TV Installation Type" OSD, the “Select Menu Language” OSD appears.
–– Initially highlighted: English
–– If you press the Enter key, the “Picture Mode” OSD appears
yy Picture Mode OSD
–– Initially highlighted: Standard.
–– The TV displays the Picture Mode OSD where you can choose the Dynamic or a Standard Picture mode.
yy Auto Program OSD
–– If you press the Enter key, the TV automatically searches for channels.
yy Set Clock Mode, DST(Daylight saving time), and Time Zone OSD
–– Initially highlighted:
Clock Mode : Auto, DST : Off, Time Zone : Eastern
–– If the TV will be tuned to digital broadcast channels, and these channels transmit date and time information, set
the Clock Mode to Auto. The TV will set the date and time automatically.
–– If the TV will not be tuned to digital broadcast channels, set the Clock Mode to Manual, and then set the date
and time on the TV manually.
–– Set DST On or Off to apply or not apply daylight saving time to the TV.
–– Select your time zone on the map that appears.
English
37
USB Software Upgrade Method
Samsung may offer upgrades to the TV’s SW in the future. Please contact the Samsung Hospitality Hot line at 1-866-8940524 to receive information about downloading upgrades and using a USB drive to update the SW by connecting the USB
drive containing the upgrade to the USB port located on the TV.
When the software is upgraded, video and audio settings you have made will return to their default (factory) settings. We
recommend you clone the hospital settings so that you can easily reset them after the upgrade.
To upgrade the TV's software, follow these steps:
1. Insert a USB drive containing the SW upgrade into the USB port on the side of the
TV.
2. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Support, and then press the ENTERE button.
3. Press the ▲ or ▼ button to select SW Upgrade, and then press the ENTERE
button.
The message "Scanning for USB. This may take more than 1min." is displayed.
4. The message "Upgrade version XXXX to version XXXX? The system will be reset
after upgrade." is displayed.
Press the ◄ or ► to select OK, and then press the ENTERE button.
Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied. The TV will
turn off and turn on automatically after completing the SW upgrade. Please check the SW version after the upgrades are
complete.
Soundbar(AirTrack)
yy Samsung Soundbar(AirTrack) and Hospitality TVs in 2016
–– Samsung Soundbar(AirTrack) and hospitality TVs support the HDMI ARC feature If you connect a compatible
Samsung Soundbar(AirTrack) to a compatible Samsung hospitality TV using a single HDMI cable, guests can
listen to the TV's sound through the Soundbar(AirTrack).
–– The item of Soundbar(AirTrack) Out in Hospitality Option Menu makes you control to where the TV sound is
outputted when the TV is turned on.
If Sound bar Out is On, the TV sound is automatically outputted in the Soundbar(AirTrack) device only whenever
TV is turned on.
If Sound bar Out is Off, the TV sound is automatically outputted in the TV speaker only whenever TV is turned on.
–– Models supporting the ARC function are listed below:
yy Sound-Bars: HW-H450/H550/H570/H600/H7500
HW-J450/J470/J550
HW-K450/K550
yy Setting the Soundbar(AirTrack) to Hotel Mode.
1. Set the following Hotel menu options:
–– Hotel Option > System > Sound Bar Out = On.
–– Hotel option > Power On > Power On Volume = User Defined.
–– Hotel option > Power On > Power On Volume Num > Set greater than 0.
–– Hotel option > Power On > Max Volume > Set greater than 0.
2. Connect an HDMI cable from the HDMI OUT jack on the back of the Soundbar(AirTrack) to the HDMI2 port
(supporting ARC) on the hospitality TV.
3. After the Soundbar(AirTrack) is connected to the hospitality TV, when the TV turns on, the Soundbar(AirTrack)
automatically detects the TV, and then automatically switches to Hotel Mode.
38
English
Soundbar(AirTrack) Hotel mode functional characteristics:
yy
yy
yy
yy
yy
Power On/Off is synchronized with the TV
HDMI_CEC defaults set to On
Functions through the “HDMI OUT” port only
Disables the "Input mode" key on the VFD to prevent unexpected audio-source changes.
Acquires adjustable Power On and Max Volume settings from the TV’s Hotel option menu. Soundbar's Power
On Volume and Max Volume values, however, are ½ of Power On Volume and Max Volume settings in the TV's
Hotel option menu. Example: If the TV's Power On Volume=20 and Max Volume=90, then Soundbar's Power On
Volume=10 and Max Volume=45.
yy To use Voice Guide while an external device is connected to the DIGITAL AUDIO OUT (OPTICAL) or HDMI IN (ARC)
terminal, be sure to select PCM at MENU > Sound > Additional Settings > Audio Format.
Channel Bank Editor (Smoovie TV Only)
The Channel Bank Editor in conjunction with the SMOOVIE remote lets you control the channels guests have access to.
The Channel Bank Editor provides three Banks of channels and lets you select which channels will be available from each
bank. SMOOVIE remotes have installable Bank Cards which correspond to the channel banks in the Channel Bank Editor.
The remotes only allow access to channels in the channel bank that correspond to the installed card. Consequently, the
channels a guest can access depend on the Bank Card installed in their SMOOVIE remote.
Setting the Channel Bank Editor under Stand-alone Mode
1. Press MUTE → 1 → 1 → 9 → ENTERE on the remote to enter the Hotel Standalone menu.
2. Go to SI vendor, and then select : “Smoovie”
3. Find the new menu option, "Channel" → "Channel Bank Editor".
4. Enter the “Channel Bank Editor”.
Hospitality Mode
SI Vendor
Standalone
OFF
Widget Solution
DRM
d
SI Vendor
Smoovie
d
SI Vendor
Smoovie
d
SI Vendor
Smoovie
<Depending on model and region, some menu items may not exist.>
English
39
5. Edit the Channel Bank. An example is below.
a. Bank1 (Free channel): Select the channels that will be accessible when a remote doesn’t have a card.
b. Bank2 (Family Card - Green): Select the channels that will be accessible when a remote has a GREEN CARD.
c. Bank3 (Adult Card - Red): Select the channels that will be accessible when a remote has a RED CARD.
Channel Bank Editor
Bank1 (4)
Bank2 (6)
Bank3 (36)
All
1 ABC
2 CBS
3 FOX
4 NBC
5 CNN
6 CW
7 HBO
8 TNT
Move
Select/Deselect
Return
Information About SMOOVIE Remote Controls
yy
yy
yy
yy
yy
If you select SMOOVIE as the SI vendor, you should also use SMOOVIE remotes in your facility.
Guests with remotes that do not have a card can only view channels from Bank 1.
Guests using the Numeric keys on the remote to change channels can only view channels from Bank 1.
Guests with remotes that have Green or Red cards must use the channel up/down keys to change channels.
Guests can only see channels from the Bank1 channel list In the Channel Guide or the Channel List.
Smoovie Set Up Sequence
Smoovie TV Setup (Air/ Cable )
Step
Only Air or Cable used
If the TV starts with Hotel Plug&Play
If Hotel Plug&Play already done
1
Do a complete P&P (including Air or Cable auto tune)
Enter the Hotel menu
2
After P&P, the TV displays the Hotel menu
Select the channel type
- ATV or ADTV for Air
- CATV or CDTV for cable
3
Select the channel type
- ATV or ADTV for Air
- CATV or CDTV for cable
Select Smoovie TV in the Hotel menu
4
Select Smoovie TV in the Hotel menu
Select Channel Setup
5
Select Channel Setup
(Can be skipped)
Select "Air" or "Cable" to auto tune
6
Select "Air" or "Cable" to auto tune. (Can be skipped,)
Set up channels in the CH Bank Editor
7
Set up channels in the CH Bank Editor
After power off & on, guests can use the TV
8
After power off & on, guests can use the TV
9
10
40
Only Air or Cable used
English
Channel Editor
The Channel Editor lets you edit the channels stored in the TV's memory. Using Channel Editor you can:
–– Change the channel numbers and names, and sort the channels in your desired channel number order.
–– Apply the video mute to channels you select. The video mute blanks out the video from a channel and outputs only
the sound while displaying a speaker icon on the screen.
The Channel Editor also lets you view information about each channel easily, without your having to display each
channel directly.
Hospitality Mode
SI Vendor
Standalone
OFF
Widget Solution
Virtual Standby
Power On
Security Mode
Channel
DRM
MyChannel
System
Menu OSD
Clock
Music Mode
Remote Jack Pack
External Source
r
Channel Editor
Bathroom Speaker
Eco Solution
Logo/Message
Cloning
REACH Solution
Network
<Depending on model and region, some menu items may not exist.>
General Steps for Using the Channel Editor in Stand-alone Mode
Step
Broad Outline
1
Run ‘Channel Auto Store’ in the Hotel Option Menu.
2
Enter ‘Channel Editor’ in the Hotel Option Menu.
3
On a piece of paper, compile a list of channels you want to have, arranged in the order you want.
4
Rearrange channels and edit channel names with the TOOLS Button based on the list you compiled.
5
Press the EXIT or RETURN Button to exit.
<For a detailed explanation of how Channel Editor works, see pages 42 through 44.>
English
41
The picture below shows a sample Channel Editor screen.
Channel
All
a Delete
b Select All
a2
----- (Cable)
a 10
CW
a3
----- (Cable)
Air 10-1
CW DTV
a4
----- (Cable)
a 11
HBO
a5
----- (Cable)
Air 11-1
HBO DTV
a6
----- (Cable)
a 12
NBC
a7
ABC
Air 12-1
NBC DTV
Air 7-1
ABC
a 13
----- (Cable)
a8
FOX
a 14
CNN
Air 8-1
FOX DTV
Air 15
----- (Cable)
a9
----- (Cable)
a 16
} Video Mute On
` Information
U Page
E Select
TNT
T Tools
R Return
yy a Indicates an analog channel.
yy Channels without an a are digital channels.
✎✎ If Dynamic SI in the Hospitality Option Menu is On, Channel Editor will display no digital channels. You must set
Dynamic SI to Off before you can edit digital channels in Channel Editor.
yy The guide at the bottom of the Channel Editor menu displays the remote buttons you need to press to apply Channel
Editor functions.
1 Using the remote's up or down arrow key, highlight the channel that you want to edit.
–– To edit more than one channel, move the highlight to a channel, and then press the ENTERE key. A check will
appear in the check box next to the channel. Repeat for each channel you want to edit.
2 To delete the channel or channels you selected from the channel list, press the red button on the remote.
–– To delete two or more channels simultaneously, select multiple channels in Step 1, and then press the red
button on the remote.
3 Press the green button on the remote to select all channels.
4 To apply the video mute, press the yellow button on the remote.
–– To apply the video mute to two or more channels simultaneously, select multiple channels in Step 1, and then
press the yellow button on the remote.
5 To view information about a channel, including video mute set up, press the INFO button on the remote.
6 Press the TOOLS button on the remote to rename a channel or change the channel number.
Channel Editor Functions and Remote Button
a Red (Delete): Deletes a channel from the channel list.
b Green (Select All): Selects all channels at once.
{ Yellow (Deselect All): Deselects all channels at once.
} Blue (Video Mute On/Off): You can set the Video Mute On/Off.
U (Page): Moves to next or previous page.
` (Information): Display details of the selected channel.
T (Tools): Displays the option menu.
R (Return): Returns to the previous step or exits.
42
English
When you press the TOOLS button, the following menu is available.
Channel
TOOLS
All
a Delete
b Select All
a2
----- (Cable)
a 10 Number CW
Edit Channel
a3
----- (Cable)
a4
----- (Cable)
a5
----- (Cable)
10-1
RenameAirChannel
a 11
Information
Air 11-1
a6
----- (Cable)
a 12
NBC
a7
ABC
Air 12-1
NBC DTV
Air 7-1
ABC
a 13
----- (Cable)
a8
FOX
a 14
CNN
Air 8-1
FOX DTV
Air 15
----- (Cable)
a9
----- (Cable)
} Video Mute On
` Information
a 16
U Page
E Select
CW DTV
HBO
HBO DTV
TNT
T Tools
R Return
R Return
yy Edit Channel Number
Use Edit Channel Number to change the channel number of a channel you select.
To change a channel number, follow these steps:
Edit Channel Number
1. Select a channel on the Channel Edit screen.
2. Press the TOOLS button on your remote.
4
3. Select Edit Channel Number in the Tools menu.
Ok
ABC HD_
Cancel
4. Use the up or down arrow keys to change the channel number.
U Adjust
5. Select OK when done, and then press the ENTERE button.
E Space
R Return
✎✎ When you change the channel number, the channel information is not
updated automatically.
yy Rename Channel
Use Rename Channel to change the name of a channel you select.
To change the name of a channel, follow these steps:
1. Select a channel on the Channel Edit screen.
2. Press the TOOLS button on your remote.
3. Select Rename Channel in the Tools menu.
4. Use the on-screen keyboard that appears to enter the new name for the
channel. Use the arrow buttons on your remote to select a letter or number,
and then press Enter. Repeat for each letter or number you want to select.
5. When finished, select Done on the bottom of the screen, and then press the
ENTERE button.
Rename Channel
Enter new name for CH 4 (Max Length = 24)
ABC HD_
a
b
c
d
e
f
1
2
3
g
h
i
j
k
l
4
5
6
m
n
o
p
q
r
7
8
9
s
t
u
v
w
x
y
z
0
◄
►
A/a
Space

Done
Cancel
a Delete
{ Space
R Return
yy Information
Use Information to view information about a channel you select.
To view information about a channel, follow these steps:
Information
1. Select a channel on the Channel Edit screen.
2. Press the TOOLS button on your remote.
3. Select Information in the Tools menu.
4. Select OK, and then press the ENTERE button to close the Information
screen.
OK
English
43
The external sources of this TV are displayed in the last page of the Channel Editor menu as shown in the example below.
In the example, there are two external sources connected to the TV, HDMI2 and AV.
–– You can assign a new analog channel to an external source by selecting the source on the last page, pressing the
TOOLS button, selecting Edit Channel Number, and then using the up or down arrow button on the remote to select
the channel number of the analog channel.
–– If you tune to a channel after assigning the channel to an external source, you can enter the external source without
opening the TV source menu.
Channel
All
a 628
MLS Soccer
a 629
CNN NEWS
a 812
American Idol
a 840
90210
a 841
LOST
a 998
Euro Football
a
HDMI1
a
HDMI2
a
HDMI3
a
AV
b Select All
U Page
E Select
T Tools
R Return
After assigning channel number
997 to the AV source.
Channel
All
a 628
MLS Soccer
a 629
CNN NEWS
a 812
American Idol
a 840
90210
a 841
LOST
a 997
AV
a
Euro Football
a
HDMI1
a
HDMI2/DVI
a
HDMI3
a Delete
44
English
b Select All
U Page
E Select
T Tools
R Return
Installing the Wall Mount
Installing the wall mount kit
You can mount the TV on the wall using a wall mount kit (sold separately).
Wall mount
bracket
TV
C
✎✎ The Product shape may differ depending on the model.
Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the TV on a wall.
For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a
technician for assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage
to the product or injury to yourself or others if you select to install the TV on your own.
Securing the TV to the Wall
Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children
do not hang on or destabilize the TV. Doing so may cause the TV to tip over, causing serious injuries or death.
Follow all safety precautions provided in the Safety Flyer included with your TV. For added stability and safety,
you can purchase and install the anti-fall device as described below.
To Prevent the TV from Falling
✎✎ TV Holder Kits are sold separately. To purchase a TV Holder Kit, contact Samsung Customer Care.
1. Insert the screws into the wall brackets and firmly fasten them to the wall. Make sure the screws are firmly fixed to the
wall.
✎✎ We strongly recommend you drive the screws into a stud.
2. Insert the screws into the wall brackets and firmly fasten the screws to the top VESA screw holes on theback of the TV.
3. Connect the brackets on the TV and the brackets on the wall with a strong string or cable, and then tie the string or
cable tighrly to the brackets.
✎✎ Verify all connections are properly secured. Periodically check the connections for any sign of fatigue or failure. If
you have any doubt about the security of your connections, contact a professional installer.
✎✎ Install the TV close to the wall so that it does not fall.
✎✎ Connect the string or cable so that the brackets on the wall are at the same height or lower than the brackets on
the TV. Untie the string or cable before moving the TV.
English
45
Wall Mount Kit Specifications (VESA)
✎✎ The wall mount kit is not supplied, but sold separately.
Install your wall mount on a solid wall perpendicular to the floor. If you are attaching the wall mount to building materials
other than plaster board, contact your nearest dealer. If installed on a ceiling or slanted wall, the TV may fall and cause
severe personal injury.
✎✎ NOTE
–– Standard dimensions for wall mount kits are shown in the table below.
–– Samsung wall mount kits contain a detailed installation manual. All parts necessary for assembly are provided.
–– Do not use screws that do not comply with the VESA standard screw specifications.
–– Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw
specifications. Screws that are too long may cause damage to the inside of the TV set.
–– For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may
differ depending on the wall mount specifications.
–– Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to
personal injury. Samsung is not liable for these kinds of accidents.
–– Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is
used or the consumer fails to follow the product installation instructions.
–– Do not mount the TV at more than a 15 degree tilt.
–– Always have two people mount the TV onto a wall.
TV size in inches
VESA screw hole specs (A * B) in
millimeters
C (mm)
Standard Screw
(Length*
Pitch in mm)
Quantity
43
200 x 200
22
M8
4
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to
electric shock.
46
English
Anti-theft Kensington Lock
The Kensington Lock is a device you can use to physically fix a TV to a
location when you use it in a public place. The appearance and locking
method may differ from the illustration at right, depending on the
manufacturer. Refer to the manual provided with the Kensington Lock for
additional information on proper use.
The Kensington Lock is not supplied by Samsung.
✎✎ Please find the “K” icon on the rear of the TV. A Kensington slot is
beside the “K” icon.
1
<Optional>
To lock the product, follow these steps:
1. Wrap the Kensington lock cable around a large, stationary object such as desk or chair.
2. Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable.
3. Insert the locking device into the Kensington slot on the product 1.
4. Lock the lock.
✎✎ These are general instructions. For exact instructions, see the User manual supplied with the locking device.
✎✎ The locking device has to be purchased separately.
✎✎ The location of the Kensington slot may be different depending on the TV model.
English
47
Specifications
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
50°F to 104°F (10°C to 40°C)
10% to 80%, non-condensing
-4°F to 113°F (-20°C to 45°C)
5% to 95%, non-condensing
Model Name
HG43NE590
Display Resolution
Stand Swivel (Left / Right)
Screen Size
(Diagonal)
Sound (Output)
Dimensions (W x H x D)
Body
With stand
Weight
Without Stand
With Stand
1920 x 1080
20° / 60° / 90°
43” Class
(42.5” measured diagonally)
20W (L:10W, R:10W)
38.8 x 22.7 x 2.8 inches
(985.5 x 575.3 x 72.2 mm)
38.8 x 24.6 x 8.9 inches
(985.5 x 624.2 x 226.5 mm)
17.0 lbs (7.7 kg)
23.4 lbs (10.6 kg)
✎✎ Design and specifications are subject to change without prior notice.
✎✎ This device is a Class B digital apparatus.
✎✎ For power supply and power consumption information, refer to the label attached to the product.
48
English
Display Resolution
When you use your TV as a computer monitor, you can also select one of the standard resolutions listed in the Resolution
column. The TV will automatically adjust to the resolution you choose.
Mode
Resolution
Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
Pixel Clock Frequency
(MHz)
Sync Polarity
(H / V)
IBM
640 x 350
720 x 400
31.469
31.469
70.086
70.087
25.175
28.322
+/-/+
MAC
640 x 480
832 x 624
1152 x 870
35.000
49.726
68.681
66.667
74.551
75.062
30.240
57.284
100.000
-/-/-/-
VESA DMT
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 720
1280 x 800
1280 x 1024
1280 x 1024
1366 x 768
1440 x 900
1600 x 900RB
1680 x 1050
1920 x 1080
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
67.500
45.000
49.702
63.981
79.976
47.712
55.935
60.000
65.290
67.500
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.000
59.810
60.020
75.025
59.790
59.887
60.000
59.954
60.000
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
74.250
83.500
108.000
135.000
85.500
106.500
108.000
146.250
148.500
-/-/-/+/+
+/+
+/+
-/-/+/+
+/+
+/+
-/+
+/+
+/+
+/+
-/+
+/+
-/+
+/+
✎✎ NOTE
–– The interlaced mode is not supported.
–– The set might operate abnormally if you select a non-standard video format.
–– Separate and Composite modes are supported. SOG (Sync On Green) is not supported.
English
49
Dimensions
Front view / Side view
2.8
38.8
37.1
20.9
22.7 24.6
8.9
21.9
(Unit: inches)
Jack panel detail / Rear view
✎✎ Detailed dimensions can be checked at Displaysolutions.samsung.com.
Base Stand detail
(Unit: inches)
2.6
5.3
R9.5
R3.8
5.9
21.9
8.9
5.8
✎✎ NOTE
All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the
dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors.
50
English
Important Warranty Information Regarding Television Format Viewing
✎✎ See the warranty card for more information on warranty terms.
Wide screen format LED Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format
full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen
if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the
dark sidebars on nonexpanded standard format television video and programming, should be limited to no more than 5% of the total
television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or
computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the
above guidelines can cause uneven aging of LED Displays that leave subtle, but permanent burned-in ghost images in the LED picture. To
avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LED
models that offer picture sizing features, use these controls to view different formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven LED aging as a result of format selection and use, as
well as burned-in images, are not covered by your Samsung limited warranty.
yy SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT
Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics
(SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally
provide Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products
purchased in the United States, for the warranty period originally specified, and to the Original Purchaser only.
The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement,
the Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center.
Transportation to and from the Service Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing
defects in material or workmanship, and only those encountered in normal use of the product.
Excluded, but not limited to, are any originally specified provisions for, in-home or on-site services, minimum or maximum repair times,
exchanges or replacements, accessories, options, upgrades, or consumables.
For the location of a SAMSUNG Authorized Service Center, please call toll-free:
–– In the United States: 1-866-sam4biz
–– In Canada: 1-800-749-0205
English
51
License
Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, the Symbol, DTS
in combination with the Symbol, DTS Premium Sound|5.1, DTS Digital Surround, DTS Express, and DTS Neo2:5
are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries.
© DTS, Inc. All Rights Reserved.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the
Symbol, & DTS and the Symbol together are registered trademarks and DTS Studio Sound is a trademark of
DTS, Inc. © DTS, Inc. All Rights Reserved.
This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video.
To play purchased DivX movies, first register your device at vod.divx.com. Find your registration code
in the DivX VOD section of your device setup menu.
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC and are used under license.
Covered by one or more of the following U.S. patents:
7,295,673; 7,460,668; 7,515,710; 8,656,183; 8,731,369; RE45,052.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing LLC in the United States and other countries.
Open Source License Notice
Open Source used in this product can be found on the following webpage. (http://opensource.samsung.com)
Open Source License Notice is written only English.
52
English
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Samsung Hospitality Hotline 1-866-sam4biz (US)
1-800-749-0205 (CANADA)
1-800-726-7864 (MEXICO)
Web site: http://www.samsung.com/us/business
© 2016 Samsung Electronics America, Inc
NE590S-NA-Eng-04
Download PDF

advertising