Samsung | CL-21M2MQ | Samsung CL-21M2MQ Manual de Usuario

AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 1
CL21M2
CL21M6
CL21M21
CL21T21
COLOR TELEVISION
Owner’s
Instructions
Register your product at www.samsung.com/global/register
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 2
Important Warranty Information
Regarding Television Format
Viewing
Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are
primarily designed to view standard format full-motion video. The images displayed on
them should primarily be in the standard 4:3 ratio format and constantly moving.
Displaying stationary graphics and images on screen, such as the dark top and bottom
letterbox bars (wide screen pictures), should be limited to no more than 15% of the total
television viewing per week.
Wide screen format televisions (16:9, the aspect ratio of the screen width to height) are
primarily designed to view wide screen format full-motion video. The images displayed on
them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the
screen if your model offers this feature, and constantly moving. Displaying stationary
graphics and images on screen, such as the dark side-bars on non-expanded standard
format television video and programming, should be limited to no more than 15% of the
total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video
game displays, station logos, web sites or computer graphics and patterns, should be
limited as described above for all televisions. Displaying any stationary images that exceed
the above guidelines can cause uneven aging of picture tubes (CRTs) that leave subtle, but
permanent burned-in ghost images in the television picture. To avoid this, vary the
programming and images, and primarily display full screen moving images, not stationary
patterns or dark bars. On television models that offer picture sizing features, use these
controls to view the different formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven CRT
aging as a result of format selection and use, as well as other burned-in images, is not
covered by your Samsung limited warranty.
English - 2
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 3
CONTENTS
Chapter 1: Your New TV ................................5
List of Features ..........................................................................................5
Accessories ................................................................................................5
Familiarizing Yourself with the TV.............................................................6
Control Buttons ..............................................................................6
Connection Jacks (Side)..................................................................7
Connection Jacks (Rear) .................................................................8
Remote Control ..............................................................................9
Installing Batteries in the Remote Control.....................................10
Chapter 2: Installation................................. 11
Connecting VHF and UHF Antennas.......................................................11
Antennas with 300-ohm Flat Twin Leads......................................11
Antennas with 75-ohm Round Leads............................................12
Separate VHF and UHF Antennas.................................................12
Connecting Cable TV ..............................................................................13
Cable without a Cable Box ...........................................................13
Connecting to a Cable Box that Descrambles All Channels ...........13
Connecting to a Cable Box that Descrambles Some Channels .......14
Connecting a VCR ...................................................................................15
Connecting a Second VCR to Record from the TV ........................15
Connecting a DVD Player ........................................................................16
Connecting to Y, PB, PR .................................................................16
Connecting to Regular Audio and Video Jacks..............................16
Connecting a Camcorder .........................................................................17
Connecting to an Analog Amplifier..........................................................17
Chapter 3: Operation....................................18
Turning the TV On and Off .....................................................................18
Plug & Play Feature.................................................................................18
Viewing the Menus and On-Screen Displays............................................20
Viewing the Menus .......................................................................20
Viewing the Display......................................................................20
Selecting a Menu Language......................................................................21
Memorizing the Channels........................................................................22
Selecting the Video Signal Source .................................................22
Storing Channels in Memory (Automatic Method) .......................23
Adding and Erasing Channels..................................................................24
Changing Channels .................................................................................25
Using the Channel Buttons ...........................................................25
Using the Number Buttons ...........................................................25
Using the PRE-CH Button to Select the Previous Channel ............25
Labelling the Channels ............................................................................26
Picture Control ........................................................................................27
Using Automatic Picture Settings..................................................27
Customizing the Picture ...............................................................28
Resetting the Picture Settings to the Factory Defaults....................29
continued...
English - 3
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 4
CONTENTS
Chapter 3: Operation....................................30
Sound Control.........................................................................................30
Adjusting the Volume ...................................................................30
Using the MUTE Button ...............................................................30
Using Automatic Sound Settings...................................................31
Customizing the Sound ................................................................32
Setting the Clock .....................................................................................33
Viewing an External Signal Source...........................................................34
Setting the Signal Source ..............................................................34
Assigning Names to External Input Mode.....................................35
Chapter 4: Special Features.........................36
Fine Tuning Channels..............................................................................36
Changing the Screen Size ........................................................................37
Digital Noise Reduction...........................................................................38
DNIe JrTM (Digital Natural Image engine)
(depending on the model) ...39
Viewing Picture-In-Picture (depending on the model) .............................40
Activating the PIP .........................................................................40
Selecting an External Source.........................................................41
Swapping the Sub Picture and Main Picture .................................41
Changing the Size of the Sub Picture ............................................41
Changing the Position of the Sub Picture......................................42
Changing the Channel of the Sub Picture .....................................42
Using the R.Surf Feature..........................................................................43
Choosing a Multi-Channel Sound (MTS) track ........................................44
Extra Sound Settings (Auto Volume, Pseudo Stereo, or Turbo Plus) .........45
Setting the On/Off Timer .........................................................................46
Setting the Preferred Channel and Volume Level ..........................47
Setting the Sleep Timer............................................................................48
Viewing Closed Captions (On-Screen Text Message) ...............................49
Locking the Channel (depending on the model)......................................51
Setting the Blue Screen Mode ..................................................................52
Setting the On/Off Melody.......................................................................53
Viewing the Demonstration .....................................................................54
Chapter 5: Troubleshooting .........................55
Identifying Problems ...............................................................................55
Appendix .......................................................56
Cleaning and Maintaining Your TV..........................................................56
Using Your TV in Another Country .........................................................56
Specifications ..........................................................................................56
English - 4
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 5
Chapter One
YOUR NEW TV
List of Features
Your TV is designed with the latest technology. This TV is a high-performance unit that
includes the following special features:
• Easy-to-use remote control
• Easy-to-use on-screen menu system
• Automatic timer to turn the TV on and off
• Adjustable picture and sound settings that can be stored in the TV’s memory
• Automatic channel tuning for up to 181 channels
• A special filter to reduce or eliminate reception problems
• A built-in multi-channel sound decoder for stereo and bilingual listening
• Built-in, dual channel speakers
• A special sleep timer
• Picture-In-Picture (depending on the model)
Accessories
Once you have unpacked your TV, check to make sure that you have all the parts shown
here. If any piece is missing or broken, call your dealer.
Remote Control/
AAA Batteries
Owner’s Instructions/
Safety Guide Manual
English - 5
Warranty Card/
Registration Card
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 6
YOUR NEW TV
Familiarizing Yourself with the TV
Control Buttons
You can control your TV’s basic features, including the on-screen menu. To use the more
advanced features, you must use the remote control.
CL21M6
CL21M21
CL21T21
ΠMENU
ˆ Indicator
Press to see an on-screen menu of your TV's
features.
´ – VOL +
Press to increase or decrease the volume. Also
used to select items on the on-screen menu.
ˇ
(▼) CH
(▲)
Press to change channels. Also press to move
between items on the on-screen menu.
¨ Remote Control Sensor
Aim the remote control towards this spot on the
TV.
(depending on the model)
• Stand-By ; Red
Lights up when you turn the power off.
- Power Off ; Red
- Power On ; Off
• TIMER ; Green
When the TV is turned on, the TIMER indicator
blinks five times. This indicator illuminates
when the TIMER mode is set to the “On”
position after setting the clock and either the
On timer or Off timer, with the remote control.
Even if the power is turned off, this indicator
stays lit. (Clock must be set before using this
function.)
Ø POWER
Press to turn the TV on and off.
English - 6
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 7
YOUR NEW TV
Connection Jacks (Side)
You can connect an A/V component that is used only occasionally, such as a camcorder or
video game. (For information on connecting equipment, see page 17.)
ΠAUDIO Input
Connect audio signals from a camcorder or video game.
´ VIDEO Input
Connect a video signal from a camcorder or video game.
ˇ Headphone
Connect a set of external headphones to this jack for private
listening.
• Please be sure to match the color coded input terminals
and cable jacks.
English - 7
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 8
YOUR NEW TV
Connection Jacks (Rear)
Use the rear panel jacks to connect an A/V component that will be connected
continuously, such as a VCR or a DVD player.
For more information on connecting equipment, see pages 11~17.
• Please be sure to match the color coded input terminals and cable jacks.
ΠAudio-Video Output jacks
Connect to the audio/video input jacks of a
recording VCR.
¨ S-Video Input jack
(depending on the model)
Connect to S-Video output jack of an S-VHS VCR
or DVD player.
´ Video Input jacks
Connect to the video output jacks of VCRs, DVD
players and similar devices.
ˇ Audio Input jacks
Connect to the audio output jacks of VCRs, DVD
players and similar devices.
When using the S-Video or Component Video
input, connect audio jacks to “AV IN 2 (AUDIOL/R)”.
English - 8
ˆ Component Video Input
jacks (Y, PB, PR)
Connect to the Component audio and video
outputs of DVD or DTV set-top box. 480i video
signal input is available.
Ø VHF/UHF
Connect to an antenna or to a cable TV system.
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 9
YOUR NEW TV
Remote Control
You can use the remote control up to about 23 feet from the TV. When using the remote,
always point it directly at the TV.
ΠPOWER
˝ PRE-CH
Turns the TV on and off.
Tunes to the previous channel.
´ Number buttons
Ô TV/VIDEO
Press to select channels directly
on the TV.
Press to display all of the available
video sources.
ˇ +100
 CH
Press to select channels over 100.
For example, to select channel 121,
press “+100”, then press “2” and
“1”.
Ò INFO
Press to display information on the
TV screen.
¨ MUTE
Ú EXIT
Press to temporarily cut off the
sound.
ˆ VOL
, CH
Press to change channels.
Press to exit the menu.
+, VOL -
Æ R.SURF
Press to increase or decrease the
volume.
Press to automatically return to a
preferred channel after a userpreset time delay.
(Refer to page 43)
Ø SLEEP
Press to select a preset time
interval for automatic shut off.
(Refer to page 48)
ı MTS
(Multi-channel Television Sound)
Press to choose “Stereo”, “Mono”,
or “SAP” (Secondary Audio
Program).
(Refer to page 44)
∏ MENU
Displays the main on-screen menu.
” …/†/œ/√
˜ PIP Controls
Controls the cursor in the menu.
(depending on the model, refer to
pages 40~42)
’ ENTER
While using the on-screen menus,
press ENTER to activate (or
change) a particular item.
PIP
Press to activate or deactivate the
PIP function.
SWAP
Press to interchange the main
picture and sub-picture.
SIZE
Press to select a size (“Large” or
“Small”) of the sub-picture.
CH
Press to select a channel of the
sub-picture only when the
“Source” is set to “TV”.
English - 9
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 10
YOUR NEW TV
Installing Batteries in the Remote Control
1
Slide the cover out
completely.
œ Make sure to match the “+” and
“–” ends of the batteries with the
diagram inside the compartment.
2
Install two AAA size
batteries.
œ Remove the batteries and store
them in a cool, dry place if you
won’t be using the remote control
for a long time.
3
Replace the cover.
The remote control can be used
up to about 23 feet from the TV.
(Assuming typical TV usage, the
batteries last for about one year.)
English - 10
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 11
C h a p t e r Tw o
I N S TA L L AT I O N
Connecting VHF and UHF Antennas
If your antenna has a set of leads that look like this,
see “Antennas with 300-ohm Flat Twin Leads”
below.
If your antenna has one lead that looks like this,
see “Antennas with 75-ohm Round Leads” on the
next page.
If you have two antennas, see “Separate VHF and
UHF Antennas” on the next page.
Antennas with 300-ohm Flat Twin Leads
If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has
300-ohm twin flat leads, follow the directions below.
1
Place the wires from the
twin leads under the screws
on the 300-75 ohm adaptor
(not supplied). Use a
screwdriver to tighten the
screws.
2
Plug the adaptor into the
“VHF/UHF” terminal on the
rear panel.
English - 11
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 12
I N S TA L L AT I O N
Antennas with 75-ohm Round Leads
1
Plug the antenna lead into
the “VHF/UHF” terminal on
the rear panel.
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must
combine the two antenna signals before connecting the antennas to the TV. This
procedure requires an optional combiner-adaptor (available at most electronics shops).
1
Connect both antenna leads
to the combiner.
2
Plug the combiner into the
“VHF/UHF” terminal on the
rear panel.
English - 12
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 13
I N S TA L L AT I O N
Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box
1
Plug the incoming cable into
the “VHF/UHF” terminal on
the rear panel.
Connecting to a Cable Box that Descrambles All Channels
œ This terminal might be labelled
“ANT OUT”, “VHF OUT” or
simply, “OUT”.
1
Find the cable that is
connected to the ANTENNA
OUT terminal on your cable
box.
2
Connect the other end of this
cable to the “VHF/UHF”
terminal on the rear panel.
English - 13
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 14
I N S TA L L AT I O N
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow
the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four
lengths of coaxial cable. (These items are available at most electronics stores.)
œ This terminal might be labelled
“ANT IN”, “VHF IN” or simply,
“IN”.
1
Find and disconnect the
cable that is connected to
the ANTENNA IN
terminal on your cable box.
2
Connect this cable to a twoway splitter.
Connect a coaxial cable
between an OUTPUT
terminal on the splitter and
the IN terminal on the cable
box.
Incoming Cable
Splitter
Cable Box
3
Connect a coaxial cable
between the ANTENNA OUT
terminal on the cable box
and the B–IN terminal on the
RF(A/B) switch.
Incoming
Cable
Splitter
RF (A/B)
Switch
Cable Box
4
Connect another cable
between the other OUT
terminal on the splitter
and the A–IN terminal on
the RF (A/B) switch.
Incoming
Cable
Splitter
Cable Box
RF (A/B)
Switch
5
Connect the last coaxial
cable between the OUT
terminal on the RF (A/B)
switch and the “VHF/UHF”
terminal on the rear panel.
Incoming
Cable
Splitter
Cable Box
RF (A/B)
Switch
TV Rear
After you’ve made this connection, set the A/B switch to the “A” position for normal
viewing. Set the A/B switch to the “B” position to view scrambled channels. (When you set
the A/B switch to “B”, you will need to tune your TV to the cable box’s output channel,
which is usually channel 3 or 4.)
English - 14
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 15
I N S TA L L AT I O N
Connecting a VCR
These instructions assume that you have already connected your TV to an antenna or a
cable TV system (according to the instructions on pages 11~14).
1
Connect a coaxial cable between the
“VHF/UHF” terminal on the TV and the antenna
out terminal on the VCR.
A coaxial cable is usually included with a
VCR. (If not, check your local electronics
store).
2
Connect a set of audio cables between the
“AV IN 1 (L, R)” (or “AV IN 2 (L, R)”) jacks on
the TV and AUDIO OUT jacks on the VCR.
If you have a mono VCR, connect L(mono) to
VCR audio out using only one audio cable.
3
Connect a video cable between the “AV IN 1
(VIDEO)” (or “AV IN 2 (VIDEO)”) jack on the TV
and the VIDEO OUT jack on the VCR.
Refer to your VCR’s instructions for more
information about how to view your VCR
tape.
• Also, you can connect to “AV IN 2” on the side panel of TV.
Connecting a Second VCR to Record from the TV
Your TV can send out signals of its picture and sound to be recorded by a second VCR.
To do this, connect your second VCR as follows:
1
Connect a set of audio cables between the
“AV OUT (L, R)” jacks on the TV and AUDIO IN
jacks on the VCR.
The VCR input jacks might be either on the
front or on back of the VCR.
2
Connect a video cable between the “AV OUT
(VIDEO)” jack on the TV and the VIDEO IN jack
on the VCR.
Refer to your VCR’s instructions for more
information about how to record using this
kind of connection.
English - 15
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 16
I N S TA L L AT I O N
Connecting a DVD Player
The rear panel jacks on your TV make it easy to connect a DVD player to your TV.
Connecting to Y, PB, PR
1
Connect a set of audio cables between the “AV IN 2
(L, R)” jacks on the TV and the AUDIO OUT jacks on
the DVD player.
2
Connect a set of video cables between the
“COMPONENT IN (Y, PB, PR)” jacks on the TV and the
COMPONENT VIDEO OUT (Y, PB, PR) jacks on the DVD
player. For an explanation of Component video, see
your DVD player’s owner’s instruction.
Connecting to Regular Audio and Video Jacks
1
Connect a set of audio cables between the “AV IN 1
(L, R)” (or “AV IN 2 (L, R)”) jacks on the TV and the
AUDIO OUT jacks on the DVD player.
2
Connect a video cable between the “AV IN 1 (VIDEO)”
(or “AV IN 2 (VIDEO)”) jack on the TV and the VIDEO
OUT jack on the DVD player.
• Also, you can connect to “AV IN 2” on the side panel of TV.
English - 16
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 17
I N S TA L L AT I O N
Connecting a Camcorder
The side panel jacks on your TV make it easy to connect a Camcorder to your TV. They
allow you to view the Camcorder tapes without using a VCR.
1
Locate the A/V output jacks on the Camcorder. They are usually
found on the side or rear of the Camcorder.
2
Connect a set of audio cables between the “AV IN 2 (L, R)” jacks
on the TV and the AUDIO OUT jacks on the Camcorder.
If you have mono Camcorder, connect L(mono) to Camcorder
audio out using only one audio cable.
3
Connect a video cable between the “AV IN 2 (VIDEO)” jack on
the TV and the VIDEO OUT jacks on the Camcorder.
The audio-video cables shown here are usually included with a
Camcorder. (If not, check your local electronics store.) If your
Camcorder is stereo, you need to connect a set of two cables.
Connecting to an Analog Amplifier
The “AV OUT (L, R)” jacks cannot be
used for external speakers. You must
hook them up to an amplifier.
When an audio amplifier is
connected to the “AV OUT (L, R)”
jacks: Decrease the gain (volume) of
the audio amplifier, and adjust the
volume level with the volume control
on the TV.
English - 17
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 18
Chapter Three
O P E R AT I O N
Turning the TV On and Off
Press the POWER button.
You can also use the POWER button on the front panel.
Plug & Play Feature
When the TV is initially powered On, basic customer settings proceed automatically and
subsequently: Setting the language, Antenna input check, Channel Memorize and Time
Setting.
• The Plug & Play function operates after plugging in the TV for the first time.
œ Plug & Play feature doesn’t work
in the AV mode.
1
Press the POWER button
on the remote control.
The “Start Plug & Play” is
displayed.
Press the ENTER button,
then the “Language” is
displayed.
Plug & Play
Start Plug & Play
OK
Enter
2
Exit
Plug & Play
Press the … or † button
to select the desired
language, then press the
ENTER button.
The“Check antenna input.”
is displayed.
Language
English
Español
Português
Français
Move
Enter
Skip
3
Make sure that the
antenna is connected to
the TV.
Press the ENTER button,
then the “Auto Program” is
displayed.
Plug & Play
Check antenna input.
OK
Enter
English - 18
Skip
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 19
O P E R AT I O N
4
Press the ENTER button to
start.
The TV begins memorizing
all available channels.
Plug & Play
Auto Program
0%
Start
Enter
5
Press the ENTER button to
stop.
Skip
Plug & Play
Auto Program
Air 3
3%
Stop
Enter
Skip
œ Refer to “Setting the Clock” on
page 33.
6
After all available channels
are stored, the “Clock Set”
is displayed.
Press the œ or √ button to
move to the hour or minute.
Set the clock by pressing
the ▲ or ▼ button.
Plug & Play
-- : -- am
Clock Set
Move
Adjust
Enter
Skip
7
When you have finished,
press the MENU button.
The “Enjoy your
watching.” is displayed.
Enjoy your watching.
OK
8
Setup
If you want to reset this
Plug & Play
Language
: English
feature
Time
(1) Press the MENU button.
Caption
Child Lock
(2) Press the ▲ or ▼
Blue Screen
: Off
button to select
Melody
: On
“Setup”, then press the
Demonstration
ENTER button.
Move
Enter
The “Plug & Play” is
selected.
(3) Press the ENTER button.
The “Start Plug & Play” is displayed.
English - 19
√
√
√
√
√
√
√
√
Return
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 20
O P E R AT I O N
Viewing the Menus and On-Screen Displays
Viewing the Menus
1
With the power on, press
the MENU button.
The “Input” menu appears
on the screen. Its left side
has five icons: Input,
Picture, Sound, Channel,
and Setup.
Input
Source List
Edit Name
Move
√
√
: TV
Enter
Exit
Press the ▲ or ▼ button to select one of the five icons. Then
press the ENTER button to access the icon’s sub-menu.
2
Input
Press the ▲ or ▼ button
√
Source List
: TV
√
Edit Name
to move to items in the
menu (the icon is
selected).
Press the ENTER or √
button to enter items in
the menu.
Move
Enter
Return
Press the …/†/œ/√
button to change the selected items.
Press the MENU or œ button to return to the previous menu.
œ You can also use the MENU,
VOL+/- and CH / buttons on
the control panel of the TV to
make selections.
3
Press the EXIT button to exit.
Viewing the Display
The display identifies the current channel and the status of certain audio-video settings.
Press the INFO button on the
remote control.
The TV displays the current
channel, the status of certain
picture and sound settings
and the current time.
Air 10
Mono
Picture
Sound
12 : 00 am
: Dynamic
: Custom
English - 20
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 21
O P E R AT I O N
Selecting a Menu Language
1
Press the MENU button.
Press the ▲ or ▼ button
to select “Setup”, then
press the ENTER button.
Setup
Move
Enter
2
Press the ▲ or ▼ button
to select “Language”, then
press the ENTER button.
Press the ▲ or ▼ button
to select “English”,
“Español”, “Português”, or
“Français”, then press the
ENTER button.
√
√
√
√
√
√
√
√
Plug & Play
Language
: English
Time
Caption
Child Lock
Blue Screen
: Off
Melody
: On
Demonstration
Return
Language
English
Español
Português
Français
Move
Enter
Press the EXIT button to
exit.
English - 21
Return
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 22
O P E R AT I O N
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (antenna)
and cable channels. After the available channels are memorized, use the CH and CH
buttons to scan through the channels. This eliminates the need to change channels by
entering the channel digits. There are three steps for memorizing channels: selecting a
broadcast source, memorizing the channels (automatic) and adding and deleting channels
(manual).
Selecting the Video Signal Source
Before your television can begin memorizing the available channels, you must specify
the type of signal source that is connected to the TV (i.e., an antenna or a cable
system).
1
Press the MENU button.
Press the ▲ or ▼ button
to select “Channel”, then
press the ENTER button
Channel
Air/Cable
Auto Program
Add/Delete
Fine Tune
Name
Move
Enter
Return
2
Press the ENTER button
to select “Air/Cable”.
Press the ▲ or ▼ button
to select “Air” or “Cable”,
then press the ENTER
button.
√
√
√
√
√
: Air
Channel
Air/Cable
Auto Program
Add/Delete
Fine Tune
Name
Move
: Air
Cable
Enter
English - 22
Return
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 23
O P E R AT I O N
Storing Channels in Memory (Automatic Method)
3
Press the ▲ or ▼ button
to select “Auto Program”,
then press the ENTER
button.
Channel
Air/Cable
Auto Program
Add/Delete
Fine Tune
Name
Move
√
√
√
√
√
: Air
Enter
Return
4
Search
Press the ENTER button
to start the auto program.
The TV begins
memorizing all
available channels.
0%
Start
Enter
Return
5
Press the ENTER button
at any time to interrupt
the memorization
process.
Search
Air 3
3%
Stop
Press the EXIT button to
exit.
Enter
Return
• All available channels are automatically stored in
memory when channels are selected by the direct tuning
function.
English - 23
œ The TV must be connected to an
antenna in order to receive TV
signals. Even if a particular
channel is deleted from the
memory, you can always tune to
that channel directly by using the
number buttons on the remote
control.
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 24
O P E R AT I O N
Adding and Erasing Channels
To add channels that were not memorized (or to delete unwanted channels from memory):
1
Press the MENU button.
Press the ▲ or ▼ button
to select “Channel”, then
press the ENTER button.
Channel
Air/Cable
Auto Program
Add/Delete
Fine Tune
Name
Move
Enter
2
Press the ▲ or ▼ button
to select “Add/Delete”,
then press the ENTER
button.
Press the ▲ or ▼ button
to select the desired
channel, then press the
ENTER button.
Press the EXIT button to
exit.
Return
Add/Delete
… More
2
3
4
5
6
† More
:
:
:
:
:
Move
Deleted
Deleted
Deleted
Deleted
Deleted
Enter
3
Press the ▲ or ▼ button
to select “Added” or
“Deleted”, then press the
ENTER button.
√
√
√
√
√
: Air
Return
Add/Delete
… More
2
3
4
5
6
† More
Move
:
:
:
:
:
Deleted
Added
Deleted
Deleted
Deleted
Deleted
Enter
English - 24
Return
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 25
O P E R AT I O N
Changing Channels
Using the Channel Buttons
Press the CH
or CH
button to change channels.
When you press CH
or CH , the TV changes channels in sequence. You will see all the
channels that the TV has memorized. (The TV must have memorized at least three channels.)
You will not see channels that were either erased or not memorized.
Using the Number Buttons
Use the number buttons to quickly tune to any channel.
Press the number buttons to go directly to a channel.
For example, to select channel 27, press “2” then “7”.
The TV will change channels when you press the second number.
When you use the number buttons, you can directly select channels that were either erased or not
memorized.
To select a channel over 100, press the +100 button. (For channel 122, press “+100” then “2” then
“2”.)
To change to single-digit channels (0–9) faster, press “0” before the single digit. (For channel “4”
press “0” then “4”.)
Using the PRE-CH Button to Select the Previous Channel
œ To quickly switch between two
channels that are far apart, tune
to one channel, then use the
number buttons to select the
second channel. Then, use the
PRE-CH button to quickly
alternate between them.
Press the PRE-CH button.
The TV changes to the last
channel you were watching.
English - 25
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 26
O P E R AT I O N
Labelling the Channels
Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”,
“PBS2”, “CNN1”, etc.). A label consists of four fields, where each field is a letter, a number
or a blank. When the INFO button is pressed, the channel label will appear next to the
channel number.
1
Press the MENU button.
Press the ▲ or ▼ button
to select “Channel”, then
press the ENTER button.
Air/Cable
Auto Program
Add/Delete
Fine Tune
Name
Move
√
√
√
√
√
: Air
Enter
2
Press the ▲ or ▼ button
to select “Name”, then
press the ENTER button.
Press the … or † button
to select the channel to be
assigned to a new name,
then press the ENTER
button.
œ You cannot select “Name” in the
AV mode.
Channel
Return
Name
… More
2
3
4
5
6
† More
Move
:
:
:
:
:
-
-
-
-
Enter
3
Return
Name
Press the … or † button to
… More
2
: A
select a letter, a number or
3
: - - - a blank. (Results in this
4
: - - - 5
: - - - sequence: A...Z, 0...9, blank,
6
: - - - -).
† More
Press the √ button to
switch to the next field,
Move
Adjust
Return
which will be selected.
Select a second letter or digit by pressing the … or † button, as
above.
Repeat the process to select the last two digits.
When you have finished, press the ENTER button.
Press the EXIT button to exit.
English - 26
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 27
O P E R AT I O N
Picture Control
You can select the type of picture which best corresponds to your viewing requirements.
Using Automatic Picture Settings
Your TV has automatic picture settings (“Dynamic”, “Standard”, and “Movie”) that are preset
at the factory. You can activate either Dynamic, Standard, or Movie by making a selection
from the menu. Or, you can select “Custom” which automatically recalls your personalized
picture settings.
1
Press the MENU button.
Press the ▲ or ▼ button
to select “Picture”, then
press the ENTER button.
Picture
Mode
Size
Digital NR
DNIe Jr
PIP
Move
: Dynamic
: Normal
: Off
: On
Enter
2
Press the ENTER button to
select “Mode”.
Press the ENTER button
again.
Press the … or † button
to select a particular item,
then press the ENTER
button.
√
√
√
√
√
Return
Mode
Mode
Contrast
Brightness
Sharpness
Color
Tint
Color Tone
Reset
Move
: Dynamic
Standard
:
100
Movie
:
50
Custom
:
75
:
50
: G 50 R 50
: Cool1
Enter
Return
Press the EXIT button to
exit.
•
•
•
•
Choose “Dynamic” for viewing the TV during the day or when there is bright light in
the room.
Choose “Standard” for the standard factory settings.
Choose “Movie” when viewing a movie.
Choose “Custom” if you want to adjust the settings according to personal preference.
English - 27
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 28
O P E R AT I O N
Customizing the Picture
You can use the on-screen menus to change the “Contrast”, “Brightness”, “Sharpness”,
“Color”, “Tint”, and “Color Tone” according to personal preference.
1
Press the MENU button.
Press the … or † button
to select “Picture”, then
press the ENTER button.
Picture
Mode
Size
Digital NR
DNIe Jr
PIP
Move
Enter
2
Press the ENTER button to
select “Mode”.
Press the ENTER button
again.
Press the … or † button
to select a particular item
(“Dynamic”, “Standard”,
“Movie, or “Custom”),
then press the ENTER
button.
Return
Mode
Mode
Contrast
Brightness
Sharpness
Color
Tint
Color Tone
Reset
Move
: Dynamic
Standard
:
100
Movie
:
50
Custom
:
75
:
50
: G 50 R 50
: Cool1
Enter
3
Press the … or † button
to select a particular item
(“Contrast”, “Brightness”,
“Sharpness”, “Color”, or
“Tint”), then press the
ENTER button.
√
√
√
√
√
: Dynamic
: Normal
: Off
: On
Return
Mode
Mode
Contrast
Brightness
Sharpness
Color
Tint
Color Tone
Reset
Move
√
: Dynamic
:
100
:
50
:
75
:
50
: G 50 R 50
√
: Cool1
√
Enter
Return
4
Press the œ or √ button
to increase or decrease
the value of a particular
item.
Press the … or † button
to select other items.
Contrast
100
When you have finished,
press the ENTER button.
continued...
English - 28
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 29
O P E R AT I O N
5
Press the ▲ or ▼ button
to select “Color Tone”,
then press the ENTER
button.
Press the … or † button
to select a particular item
(“Cool 2”, “Cool 1”,
“Normal”, “Warm 1”, or
“Warm 2”), then press the
ENTER button.
Mode
Mode
Contrast
Brightness
Sharpness
Color
Tint
Color Tone
Reset
Move
: Dynamic
:
100
:
50
: Cool275
: Cool150
: G
50 R 50
Normal
: Cool1
Warm1
Warm2
Enter
Return
Resetting the Picture Settings to the Factory Defaults
6
Press the ▲ or ▼ button to
select “Reset”, then press
the ENTER button.
The reset function is set for
each mode (“Dynamic”,
“Standard”, “Movie”, or
“Custom”).
Mode
Mode
Contrast
Brightness
Sharpness
Color
Tint
Color Tone
Reset
Move
√
: Dynamic
:
100
:
50
:
75
:
50
: G 50 R 50
√
: Cool1
√
Enter
Return
The previously adjusted settings will be reset to the factory
defaults.
English - 29
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 30
O P E R AT I O N
Sound Control
Adjusting the Volume
Press the VOL + or VOL - buttons to increase or decrease the
volume.
Using the MUTE Button
At any time, you can temporarily cut off the sound using the MUTE button.
1
Press the MUTE button and
the sound cuts off.
The “ ” is displayed.
To turn MUTE off, press the
MUTE button again, or
press either the VOL + or
VOL - button.
English - 30
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 31
O P E R AT I O N
Using Automatic Sound Settings
Your TV has automatic sound settings (“Standard”, “Music”, “Movie”, and “Speech”) that are
preset at the factory. You can activate either Standard, Music, Movie or Speech by making a
selection from the menu. Or, you can select “Custom,” which automatically recalls your
personalized sound settings.
1
Press the MENU button.
Press the ▲ or ▼ button
to select “Sound”, then
press the ENTER button.
Sound
Move
Enter
2
Press the ENTER button to
select “Mode”.
Press the ▲ or ▼ button
to select a particular item,
then press the ENTER
button.
√
√
√
√
√
√
Mode
: Custom
Equalizer
MTS
: Stereo
Auto Volume
: Off
Pseudo Stereo
: Off
Turbo Plus
: Off
Return
Sound
Mode
:
Equalizer
MTS
:
Auto Volume
Pseudo Stereo
Turbo Plus
Move
Standard
Music
Movie
Stereo
Speech
: Off
Custom
: Off
: Off
Enter
Return
Press the EXIT button to
exit.
•
•
•
•
•
Choose “Standard” for the standard factory settings.
Choose “Music” when watching music videos or concerts.
Choose “Movie” when watching movies.
Choose “Speech” when watching a show that is mostly dialog (i.e., news).
Choose “Custom” to recall your personalized settings.
English - 31
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 32
O P E R AT I O N
Customizing the Sound
The sound settings can be adjusted to suit your personal preferences.
(Alternatively, you can use one of the automatic settings. See page 31.)
1
Sound
Press the MENU button.
Press the ▲ or ▼ button
to select “Sound”, then
press the ENTER button.
√
√
√
√
√
√
Mode
: Custom
Equalizer
MTS
: Stereo
Auto Volume
: Off
Pseudo Stereo
: Off
Turbo Plus
: Off
Move
Enter
2
Return
Equalizer
Press the … or † button to
select “Equalizer”, then
press the ENTER button.
R
Press the œ or √ button to
L
100 300 1K 3K 10K
select the balance or a
particular frequency to be
Move
Adjust
Return
adjusted.
Press the … or † button to increase or decrease the level of the
required item.
Press the EXIT button to exit.
•
•
•
If you make any changes to the equalizer settings, the sound mode is
automatically switched to the “Custom” mode.
“L/R” Sound Balance Adjustment
To adjust the sound balance of the L/R speakers.
Bandwidth Adjustment (100, 300, 1K, 3K, 10K)
To adjust the level of different bandwidth frequencies.
English - 32
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 33
O P E R AT I O N
Setting the Clock
Setting the clock is necessary in order to use the various timer features of the TV. Also, you
can check the time while watching the TV. (Just press the INFO button.)
1
Press the MENU button.
Press the … or † button
to select “Setup”, then
press the ENTER button.
Setup
Move
Enter
2
Press the … or † button
to select “Time”, then
press the ENTER button.
Press the ENTER button to
select “Clock”.
Press the œ or √ button
to move to the hour or
minute. Set the clock by
pressing the ▲ or ▼
button.
Return
Time
Clock
-- :
Sleep Timer
:
On Timer
-- :
-- :
Off Timer
On Timer Channel
On Timer Volume
Move
3
√
√
√
√
√
√
√
√
Plug & Play
Language
: English
Time
Caption
Child Lock
Blue Screen
: Off
Melody
: On
Demonstration
Enter
-- am
√
Off
-- am Off
-- am Off
:
3
:
10
Return
Time
Clock
12 : 00 am
√
Sleep Timer
: Off
On Timer
-- : -- am Off
-- : -- am Off
Off Timer
On Timer Channel
:
3
On Timer Volume
:
10
Move
Adjust
Press the EXIT button to
exit.
English - 33
Return
œ The current time will appear every
time you press the INFO button.
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 34
O P E R AT I O N
Viewing an External Signal Source
Use the remote control to switch between viewing signals from connected equipment,
such as a VCR, DVD, set-top box, and the TV source (broadcast or cable).
Setting the Signal Source
1
Press the MENU button.
Input
Source List
Edit Name
√
√
: TV
Press the ENTER button to
select “Input”.
Move
Enter
2
Press the ENTER button
to select “Source List”.
Press the ▲ or ▼ button
to select the desired
signal source, then press
the ENTER button.
Return
Source List
TV
AV1
AV2
S-Video
Component
Move
-------------
Enter
Alternate method:
Press the TV/VIDEO button on
the remote control repeatedly
to select the desired signal
source
AV 1
English - 34
Return
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 35
O P E R AT I O N
Assigning Names to External Input Mode
1
Press the MENU button.
Input
Source List
Edit Name
√
√
: TV
Press the ENTER button to
select “Input”.
Move
Enter
Return
2
Press the ▲ or ▼ button
to select “Edit Name”,
then press the ENTER
button.
Input
Source List
Edit Name
Move
Enter
Return
3
Press the ▲ or ▼ button
to select the signal source
to be edited, then press
the ENTER button.
Edit Name
AV1
AV2
S-Video
Component
Move
:
:
:
:
√
√
√
√
-------------
Enter
Return
4
Press the ▲ or ▼ button
to select the desired
external device (VCR, DVD,
Cable STB, Sat. STB, AV
Receiver, DVD Receiver,
Game, Camcorder, DVD
Combo).
Press the ENTER button.
√
√
: TV
Edit Name
AV1
AV2
S-Video
Component
Move
:
:
:
:
----VCR
---DVD
---Cable
- - - STB
Sat. STB
AV Receiver
DVD Receiver
†
Enter
Press the EXIT button to
exit.
English - 35
Return
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 36
Chapter Four
S P E C I A L F E AT U R E S
Fine Tuning Channels
The Fine Tuning function lets you manually adjust the TV’s tuner if you have difficulty
tuning channels.
1
Press the MENU button.
Press the ▲ or ▼ button
to select “Channel”, then
press the ENTER button.
Channel
Air/Cable
Auto Program
Add/Delete
Fine Tune
Name
Move
√
√
√
√
√
: Air
Enter
Return
2
Press the ▲ or ▼ button
to select “Fine Tune”,
then press the ENTER
button.
Press the œ or √ button
to adjust the fine tuning.
To store the fine tuning
setting in the TV’s
memory, press the MENU
button.
To reset the fine tuning to
“0”, select ”Reset” by
pressing the ▲ or ▼
button, then press the
ENTER button.
Press the EXIT button to
exit.
Fine Tune
3
0
Reset
Move
Adjust
Return
Fine Tune
3✽
1
Reset
Move
Adjust
Return
Fine Tune
3✽
1
Reset
Move
Enter
Return
English - 36
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 37
S P E C I A L F E AT U R E S
Changing the Screen Size
1
Press the MENU button.
Press the ▲ or ▼ button
to select “Picture”, then
press the ENTER button.
Picture
Mode
Size
Digital NR
DNIe Jr
PIP
Move
: Dynamic
: Normal
: Off
: On
Enter
2
Press the ▲ or ▼ button
to select “Size”, then
press the ENTER button.
Press the ▲ or ▼ button
to select “Normal” or
“Zoom”, then press the
ENTER button.
√
√
√
√
√
Return
Picture
Mode
Size
Digital NR
DNIe Jr
PIP
Move
: Dynamic
: Normal
: Off
Zoom
: On
Enter
Return
Press the EXIT button to
exit.
• Normal (4:3) :
Sets the picture to
4:3 normal mode.
• Zoom :
Magnifies the size of
the picture.
English - 37
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 38
S P E C I A L F E AT U R E S
Digital Noise Reduction
If the signal received by the television is weak, you can activate this feature to reduce any
static and ghosting that may appear on the screen.
1
Press the MENU button.
Press the ▲ or ▼ button
to select “Picture”, then
press the ENTER button.
Picture
Mode
Size
Digital NR
DNIe Jr
PIP
Move
: Dynamic
: Normal
: Off
: On
Enter
2
Press the ▲ or ▼ button
to select “Digital NR”,
then press the ENTER
button.
Press the ▲ or ▼ button
to select “On” or “Off”,
then press the ENTER
button.
√
√
√
√
√
Return
Picture
Mode
Size
Digital NR
DNIe Jr
PIP
Move
: Dynamic
: Normal
Off : Off
On : On
Enter
Press the EXIT button to
exit.
English - 38
Return
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 39
S P E C I A L F E AT U R E S
DNIe JrTM (Digital Natural Image engine)
(depending on the model)
This feature brings you more detailed image with detail enhancement, contrast
enhancement and white enhancement. New image compensation algorithm gives brighter,
clearer, more detailed image to you. DNIe Jr technology will fit every signal into your eyes.
1
Press the MENU button.
Press the ▲ or ▼ button
to select “Picture”, then
press the ENTER button.
Picture
Mode
Size
Digital NR
DNIe Jr
PIP
Move
: Dynamic
: Normal
: Off
: On
Enter
Return
2
Press the ▲ or ▼ button
to select “DNIe Jr”, then
press the ENTER button.
Press the œ or √ button
to select “On” or “Off”,
then press the ENTER
button.
DNIe Jr
On
Adjust
Off
Enter
Press the EXIT button to
exit.
English - 39
√
√
√
√
√
Return
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 40
S P E C I A L F E AT U R E S
Viewing Picture-In-Picture
(depending on the model)
You can use the PIP feature to simultaneously watch two video sources.
Activating the PIP
1
Press the MENU button.
Press the ▲ or ▼ button
to select “Picture”, then
press the ENTER button.
Picture
Mode
Size
Digital NR
DNIe Jr
PIP
Move
Enter
Return
2
Press the ▲ or ▼ button
to select “PIP”, then press
the ENTER button.
Press the ENTER button to
select “PIP”.
Press the … or † button
to select “On”, then press
the ENTER button.
√
√
√
√
√
: Dynamic
: Normal
: Off
: On
PIP
PIP
Source
Swap
Size
Position
Channel
Move
: On
Off
: AV1
On
: Large
:
:
3
Enter
Return
œ If you turn TV off while
watching and turn it on again,
the PIP window will disappear.
œ If the PIP is activated (On) when
the picture size is set to “Zoom”
mode, the picture size is
automatically converted into
“Normal” mode. However, you
can select “Zoom” after
activating the PIP.
Alternate method:
Press the PIP button on the
remote control repeatedly to
activate or deactivate the PIP.
Air 13
AV1
Mono
continued...
English - 40
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 41
S P E C I A L F E AT U R E S
Selecting an External Source
3
Press the ▲ or ▼ button
to select “Source”, then
press the ENTER button.
Press the … or † button
to select the desired
signal source, then press
the ENTER button.
œ For more information about
external A/V components and
signals, see “Viewing an External
Signal Source” on page 34.
PIP
PIP
Source
Swap
Size
Position
Channel
Move
: On
: AV1
TV
AV1
: Large
AV2
: S-Video
:
3
Enter
Return
Swapping the Sub Picture and Main Picture
4
Press the ▲ or ▼ button
to select “Swap”, then
press the ENTER button.
The sub picture is
displayed in the main
picture, and vice versa.
PIP
PIP
Source
Swap
Size
Position
Channel
Move
√
√
√
√
√
: On
: AV1
: Large
:
:
3
Enter
Return
Alternate method:
Press the SWAP button on the
remote control repeatedly to
exchange the sub picture and
the main picture.
Changing the Size of the Sub Picture
5
Press the ▲ or ▼ button
to select “Size”, then
press the ENTER button.
Press the … or † button
to select “Large” or
“Small”, then press the
ENTER button.
PIP
PIP
Source
Swap
Size
Position
Channel
Move
: On
: AV1
: Large
: Small
:
3
Enter
Return
Alternate method:
Press the SIZE button on the
remote control repeatedly to
select the size for sub picture.
continued...
English - 41
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 42
S P E C I A L F E AT U R E S
Changing the Position of the Sub Picture
6
Press the ▲ or ▼ button
to select “Position”, then
press the ENTER button.
Press the … or † button
to select the desired
position, then press the
ENTER button.
PIP
PIP
Source
Swap
Size
Position
Channel
Move
: On
: AV1
: Large
:
:
3
Enter
Return
Changing the Channel of the Sub Picture
7
Press the ▲ or ▼ button
to select “Channel”, then
press the ENTER button.
Press the œ or √ button
to select a channel of the
sub picture, then press
the ENTER button.
œ You can select the “Channel”
when the “Source” is set to “TV”.
PIP
PIP
Source
Swap
Size
Position
Channel
Move
: On
: AV1
: Large
:
:
3
Adjust
Alternate method:
Press the CH▲ or ▼ button on
the remote control repeatedly
to select a channel of the sub
picture
English - 42
√
√
√
√
√
Return
AA68-03671A-01Eng_Latin
7/12/05
11:36 AM
Page 43
S P E C I A L F E AT U R E S
Using the R.Surf Feature
This feature allows you to set the TV to return to a particular channel after a certain
amount of time. For example, you may be watching a channel when commercials start.
You can set the R.Surf to “5 minutes”, then switch channels. After minutes, the TV will
return to the original channel. To use the R.Surf feature:
1
While you are watching the
channel to which you want to
return, press the R.SURF
button.
The “Surf Off” is displayed.
Surf
Off
œ The time will start decreasing
while you are setting up the
timer, and will reset after 5
minutes had passed or you
turn it off.
2
Press the R.SURF button
again to set the timer in
thirty second intervals, up
to five minutes.
Surf
00: 29
3
The time you set will begin counting down on the screen. When the
time runs out, the TV will return to the channel you were watching
when you set the timer.
English - 43
AA68-03671A-01Eng_Latin
7/12/05
11:37 AM
Page 44
S P E C I A L F E AT U R E S
Choosing a Multi-Channel Sound (MTS) track
Depending on the particular program being broadcast, you can listen to Mono, Stereo, or
SAP.
1
Press the MENU button.
Press the ▲ or ▼ button
to select “Sound”, then
press the ENTER button.
Sound
Move
Enter
2
Press the ▲ or ▼ button
to select “MTS”, then
press the ENTER button.
Press the … or † button
to select one of the
settings, then press the
ENTER button.
√
√
√
√
√
√
Mode
: Custom
Equalizer
MTS
: Stereo
Auto Volume
: Off
Pseudo Stereo
: Off
Turbo Plus
: Off
Return
Sound
Mode
:
Equalizer
MTS
:
Auto Volume
Pseudo Stereo
Turbo Plus
Move
Custom
Mono
Stereo
Stereo
: Off
SAP: Off
: Off
Enter
Return
Press the EXIT button to
exit.
Alternate method:
Press the MTS button on the
remote control repeatedly to
select one of the settings.
MTS
Signal
: Stereo
: Mono
• Choose “Mono” for channels that are broadcasting in mono, or if you are having difficulty
receiving a stereo signal.
• Choose “Stereo” for channels that are broadcasting in stereo.
• Choose “SAP” to listen to the Separate Audio Program, which is usually a foreign-language
translation.
English - 44
AA68-03671A-01Eng_Latin
7/12/05
11:37 AM
Page 45
S P E C I A L F E AT U R E S
Extra Sound Settings (Auto Volume,
Pseudo Stereo, or Turbo Plus)
The following sound settings can be adjusted to suit your personal preferences
• Auto Volume
Each broadcasting station has its own signal conditions, which can make it necessary
to adjust the volume every time the channel is changed. “Auto Volume” lets you
automatically adjust the volume of the desired channel by lowering the sound output
when the modulation signal is high or by raising the sound output when the
modulation signal is low.
• Pseudo Stereo
“Pseudo Stereo” converts a monaural sound signal into two identical left and right
channels. Once the “Pseudo Stereo” is set to “On” or “Off”, the setting applies to the
sound effects such as “Standard”, “Music”, “Movie” and “Speech”.
• Turbo Plus
“Turbo Plus” emphasizes the bass and treble frequencies to add fullness to the sound.
1
Press the MENU button.
Press the ▲ or ▼ button
to select “Sound”, then
press the ENTER button.
Sound
Move
Enter
2
Press the ▲ or ▼ button
to select the required item
(“Auto Volume”, “Pseudo
Stereo”, or “Turbo
Sound’), then press the
ENTER button.
Press the ▲ or ▼ button
to select “On” or “Off”,
then press the ENTER
button.
√
√
√
√
√
√
Mode
: Custom
Equalizer
MTS
: Stereo
Auto Volume
: Off
Pseudo Stereo
: Off
Turbo Plus
: Off
Return
Sound
Mode
:
Equalizer
MTS
:
Auto Volume
Pseudo Stereo
Turbo Plus
Move
Custom
Stereo
Off : Off
On : Off
: Off
Enter
Press the EXIT button to
exit.
English - 45
Return
AA68-03671A-01Eng_Latin
7/12/05
11:37 AM
Page 46
S P E C I A L F E AT U R E S
Setting the On/Off Timer
œ You must set the clock first.
1
Press the MENU button.
Press the … or † button
to select “Setup”, then
press the ENTER button.
Setup
Move
Enter
2
Press the … or † button
to select “Time”, then
press the ENTER button.
Clock
09 :
Sleep Timer
:
On Timer
-- :
-- :
Off Timer
On Timer Channel
On Timer Volume
Enter
3
Press the œ or √ button
to move to the hour or
minute. Set the clock by
pressing the ▲ or ▼
button.
Press the œ or √ button
to move to “Off”. To
activate the “On Timer”,
set to “On” by pressing
the ▲ or ▼ button.
Press the ENTER button.
Set the “Off Timer” as
methods for “On Timer”
setting.
Return
Time
Move
Press the … or † button
to select “On Timer”, then
press the ENTER button.
√
√
√
√
√
√
√
√
Plug & Play
Language
: English
Time
Caption
Child Lock
Blue Screen
: Off
Melody
: On
Demonstration
30 am
√
Off
-- am Off
-- am Off
:
3
:
10
Return
Time
Clock
09 : 30 am
√
Sleep Timer
: Off
On Timer
12 : 00 am Off
-- : -- am Off
Off Timer
On Timer Channel
:
3
On Timer Volume
:
10
Move
Adjust
Return
Time
Clock
09 : 30 am
√
Sleep Timer
: Off
On Timer
06 : 30 am On
Off Timer
11 : 00 pm On
On Timer Channel
:
3
On Timer Volume
:
10
Move
Enter
œ The current time will appear
every time you press the INFO
button.
œ Auto Power Off
When you set the timer “On”,
the television will eventually
turn off, if no controls are
operated for 3 hours after the
TV was turned on by timer.
This function is only available
in timer “On” mode and
prevents overheating or
leakages, which may occur if a
TV is on for too long (when you
are away on holiday, for
example).
Return
continued...
English - 46
AA68-03671A-01Eng_Latin
7/12/05
11:37 AM
Page 47
S P E C I A L F E AT U R E S
Setting the Preferred Channel and Volume Level
The preferred channel and volume can be set for when the timer automatically turns on
the TV.
4
Press the … or † button
to select “On Timer
Channel” or “On Timer
Volume”.
Press the œ or √ button
to select the desired
channel or adjust volume
level.
Time
Clock
09 : 30 am
√
Sleep Timer
: Off
On Timer
06 : 30 am On
Off Timer
11 : 00 pm On
On Timer Channel
:
3
On Timer Volume
:
10
Move
Adjust
Return
Time
Press the EXIT button to
exit.
Clock
09 : 30 am
√
Sleep Timer
: Off
On Timer
06 : 30 am On
Off Timer
11 : 00 pm On
On Timer Channel
:
3
On Timer Volume
:
10
Move
Adjust
English - 47
Return
AA68-03671A-01Eng_Latin
7/12/05
11:37 AM
Page 48
S P E C I A L F E AT U R E S
Setting the Sleep Timer
The sleep timer automatically shuts off the TV after a preset time (from 30 to 180 minutes).
1
Press the MENU button.
Press the … or † button
to select “Setup”, then
press the ENTER button.
Setup
Move
Enter
2
Press the … or † button to
select “Time”, then press
the ENTER button.
Press the … or † button to
select “Sleep Timer”, then
press the ENTER button.
√
√
√
√
√
√
√
√
Plug & Play
Language
: English
Time
Caption
Child Lock
Blue Screen
: Off
Melody
: On
Demonstration
Return
Time
Clock
09 : 30 am
Sleep Timer
: Off
Off
am On
On Timer
06 : 3030
am On
Off Timer
11 : 0060
On Timer Channel
:
1
90
On Timer Volume 120
:
10
150
180
Move
Enter
Return
Press the … or † button to select the appropriate time interval,
then press the ENTER button.
Press the EXIT button to exit.
œ After about 5 seconds, the sleep
display will disappear from the
screen, and the time interval
will be set.
Alternate method:
Press the SLEEP button on the
remote control repeatedly until
the appropriate time interval
appears (any of the preset
values from “30 Min.” to
“180 Min.”).
30 Min.
English - 48
AA68-03671A-01Eng_Latin
7/12/05
11:37 AM
Page 49
S P E C I A L F E AT U R E S
Viewing Closed Captions
(On-Screen Text Message)
Your TV decodes and displays the closed captions that are broadcast with certain TV shows.
These captions are usually subtitles for the hearing impaired or foreign-language
translations. All VCRs record the closed caption signal from television programs, so homerecorded video tapes also provide closed captions. Most pre-recorded commercial video
tapes provide closed captions as well. Check for the closed caption symbol in your television
schedule and on the tape’s packaging:
.
1
Press the MENU button.
Press the … or † button
to select “Setup”, then
press the ENTER button.
Setup
Move
Enter
Return
2
Press the … or † button
to select “Caption”, then
press the ENTER button.
√
√
√
√
√
√
√
√
Plug & Play
Language
: English
Time
Caption
Child Lock
Blue Screen
: Off
Melody
: On
Demonstration
Caption
Caption
Mode
Channel
Field
:
:
:
:
On
Off
Caption
On
1
1
Press the ENTER button to
select “Caption”.
Move
Enter
Return
Press the … or † button
to select “On”, then press
the ENTER button.
3
Press the … or † button
to select “Mode”, then
press the ENTER button.
Press the … or † button
to select “Caption” or
“Text”, then press the
ENTER button.
Caption
Caption
Mode
Channel
Field
Move
:
:
:
:
Enter
On
Caption
Text
1
1
Return
continued...
English - 49
œ Misspellings and unusual
characters sometimes occur
during closed caption
transmissions, especially those of
live events. There may be a small
delay before captions appear
when you change channels.
These are not malfunctions of
the TV.
œ In “Caption” mode, captions
appear at the bottom of the
screen, and they usually cover
only a small portion of the
picture.
In “Text” mode, information
unrelated to the program, such as
news or weather, is displayed. Text
often covers a large portion of the
screen.
AA68-03671A-01Eng_Latin
7/12/05
11:37 AM
Page 50
S P E C I A L F E AT U R E S
4
Depending on the
particular broadcast, it
might be necessary to
make changes to
“Channel” and “Field”.
Press the … or † button
to select “Channel” or
“Field, then press the
ENTER button.
Press the … or † button
to select “1” or “2”, then
press the ENTER button.
Press the EXIT button to
exit.
Caption
Caption
Mode
Channel
Field
Move
:
:
:
:
Enter
On
Caption
1
1
2
Return
Caption
Caption
Mode
Channel
Field
Move
:
:
:
:
Enter
English - 50
On
Caption
1
1
2
Return
œ Different channels and fields
display different information:
Field 2 carries additional
information that supplements
the information in Field 1.
(For example, Channel 1 may
have subtitles in English, while
Channel 2 has subtitles in
Spanish.)
AA68-03671A-01Eng_Latin
7/12/05
11:37 AM
Page 51
S P E C I A L F E AT U R E S
Locking the Channel
(depending on the model)
This feature allows you to prevent unauthorized users, such as children, from watching
unsuitable programmes by muting out video and audio. Child Lock cannot be released
using front (or side) panel buttons. Only remote control can release the Child Lock setting,
so keep the remote control away from children.
1
Press the MENU button.
Press the … or † button
to select “Setup”, then
press the ENTER button.
Setup
Move
Enter
Return
2
Press the … or † button
to select “Child Lock”, then
press the ENTER button.
√
√
√
√
√
√
√
√
Plug & Play
Language
: English
Time
Caption
Child Lock
Blue Screen
: Off
Melody
: On
Demonstration
œ If you want to unlock a channel,
set to “Off”.
Child Lock
Child Lock
Channel
Lock
: On
Off
: 11 On
: ?
Press the ENTER button to
select “Child Lock”.
Move
Enter
Return
Press the … or † button
to select “On”, then press
the ENTER button.
3
Press the … or † button
to select “Channel”, then
press the ENTER button.
Press the œ or √ button to
select the channel to be
locked.
Child Lock
Child Lock
Channel
Lock
Move
: On
: 11
: ?
Adjust
Return
4
Press the … or † button
to select “Lock”, then
press the ENTER button.
The “Locked” is displayed.
Press the EXIT button to
exit.
√
Child Lock
Child Lock
Channel
Lock
Move
: On
: 11
: Locked
Enter
English - 51
√
Return
œ If any channel is locked, you can
not access to the “Channel” and
“Child Lock” menu by using the
control buttons on the TV panel
(the “Not Available” is displayed
in the “Child Lock” menu).
You can access by using the
remote control only.
AA68-03671A-01Eng_Latin
7/12/05
11:37 AM
Page 52
S P E C I A L F E AT U R E S
Setting the Blue Screen Mode
If no signal is being received or the signal is very weak, a blue screen automatically replaces
the noisy picture background. If you wish to continue viewing the poor picture, you must
set the “Blue Screen” mode to “Off”.
1
Press the MENU button.
Press the … or † button
to select “Setup”, then
press the ENTER button.
Setup
Move
Enter
2
Press the … or † button
to select “Blue Screen”,
then press the ENTER
button.
Press the … or † button
to select “On” or “Off”,
then press the ENTER
button.
√
√
√
√
√
√
√
√
Plug & Play
Language
: English
Time
Caption
Child Lock
Blue Screen
: Off
Melody
: On
Demonstration
Return
Setup
Plug & Play
Language
: English
Time
Caption
Child Lock
Blue Screen
: Off
Off
Melody
: On
On
Demonstration
Move
Enter
Press the EXIT button to
exit.
English - 52
Return
AA68-03671A-01Eng_Latin
7/12/05
11:37 AM
Page 53
S P E C I A L F E AT U R E S
Setting the On/Off Melody
You can hear a melody sound when the TV is powered on or Off.
1
Press the MENU button.
Press the … or † button
to select “Setup”, then
press the ENTER button.
Setup
Move
Enter
2
Press the … or † button
to select “Melody”, then
press the ENTER button.
Press the … or † button
to select “On” or “Off”,
then press the ENTER
button.
√
√
√
√
√
√
√
√
Plug & Play
Language
: English
Time
Caption
Child Lock
Blue Screen
: Off
Melody
: On
Demonstration
Return
Setup
Plug & Play
Language
: English
Time
Caption
Child Lock
Blue Screen
: Off
Off
Melody
: On
On
Demonstration
Move
Enter
Press the EXIT button to
exit.
English - 53
Return
AA68-03671A-01Eng_Latin
7/12/05
11:37 AM
Page 54
S P E C I A L F E AT U R E S
Viewing the Demonstration
To become familiar with the various menus provided by your television, you can view the
in built demonstration.
1
Press the MENU button.
Press the … or † button
to select “Setup”, then
press the ENTER button.
Setup
Move
Enter
2
Press the … or † button
to select “Demonstration”,
then press the ENTER
button.
Each of the menu options
is displayed in turn. When
you wish to stop the
demonstration, press any
button on the remote
control.
√
√
√
√
√
√
√
√
Plug & Play
Language
: English
Time
Caption
Child Lock
Blue Screen
: Off
Melody
: On
Demonstration
Return
Setup
Plug & Play
Language
: English
Time
Caption
Child Lock
Blue Screen
: Off
Melody
: On
Demonstration
Move
Enter
Press the EXIT button to
exit.
English - 54
√
√
√
√
√
√
√
√
Return
AA68-03671A-01Eng_Latin
7/12/05
11:37 AM
Page 55
Chapter Five
TROUBLESHOOTING
If the TV seems to have a problem, first try this list of possible problems and solutions.
If none of these troubleshooting tips apply, then call your nearest Samsung authorized
service center.
Identifying Problems
Problem
Possible Solution
Poor picture.
Try another channel.
Adjust the antenna.
Check all wire connections.
Poor sound quality.
Try another channel.
Adjust the antenna.
No picture or sound.
Try another channel.
Press the TV/VIDEO button.
Make sure the TV is plugged in.
Check the antenna connections.
Make sure the MUTE button is off.
No color, wrong colors or tints.
Make sure the program is broadcast in color.
Adjust the picture settings.
Picture rolls vertically.
Adjust the antenna.
Check all wire connections.
If you are using a VCR, check the tracking.
The TV operates erratically.
Unplug the TV for 30 seconds, then try
operating it again.
Your remote control does not
operate your TV.
Make sure the remote has batteries.
Check that the “+” and “-” ends of the batteries
are inserted correctly.
Check that the batteries are drained.
The TV won’t turn on.
Make sure the wall outlet is working.
Make sure the TV is plugged in.
Make sure the remote has batteries.
English - 55
AA68-03671A-01Eng_Latin
7/12/05
11:37 AM
Page 56
Appendix
Cleaning and Maintaining Your TV
Please follow these guidelines to get the maximum performance from your TV.
Placement
• Do not place the TV near extremely hot, cold, humid or dusty places.
• Do not place the TV near appliances with electric motors that create magnetic fields,
such as vacuum cleaners.
• Keep the ventilation openings clear; do not place the TV on a soft surface, such as
cloth or paper.
• Place the TV in a vertical position only.
Liquids
• Do not handle liquids near or on the TV. Liquids that spill into it can cause serious
damage.
Cabinet
• Never open the cabinet or touch the parts inside.
• Wipe your TV with a clean, dry cloth. Never use water, cleaning fluids, wax, or
chemicals.
• Do not put heavy objects on top of the cabinet.
Temperature
• If your TV is suddenly moved from a cold to a warm place, unplug the power cord,
and allow at least two hours for moisture that may have formed inside the unit to dry
completely.
Using Your TV in Another Country
If you plan to take your TV with you to a foreign country, please be aware of the different
television systems that are in use around the world. A TV designed for one system may
not work properly with another system due to differences in the TV channel frequencies.
Specifications
Model
Voltage
Frequency of Operation
Power Consumption
Dimensions
(mm/inches)
Weight (Kg/ lbs)
CL21M21
CL21M2
AC100-240V
AC120V (Mexico)
50/60 Hz
105 Watts
AC100-240V
50/60 Hz
105 Watts
AC100-240V
AC120V (Mexico)
50/60 Hz
105 Watts
605 X 490 X 463/
23.82 X 19.29 X 18.23
28.0/61.73
582 X 481 X 456/
22.91 X 18.94 X 17.95
29.0/63.93
694 X 783 X 506/
27.32 X 30.83 X 19.92
29.0/63.93
English - 56
CL21M6
CL21T21
AA68-03671A-01Eng_Latin
7/12/05
11:37 AM
Page 57
MEMO
English - 57
AA68-03671A-01Eng_Latin
7/12/05
11:37 AM
Page 58
MEMO
English - 58
AA68-03671A-01Eng_Latin
7/12/05
11:37 AM
Page 59
MEMO
English - 59
AA68-03671A-01Eng_Latin
7/12/05
11:37 AM
Page 60
AA68-03671A-01
Download PDF