Samsung LTP2035 Quick start guide
Samsung LTP2035 is a versatile device that combines a crystal-clear display with various connectivity options, making it an ideal choice for entertainment and productivity. With its 20-inch screen and 480i resolution, you can enjoy movies, videos, and games in sharp detail.
Connect your DVD player, VCR, or gaming console through the available ports, including component video and audio inputs, S-video input, and composite video and audio inputs. The built-in speakers provide clear and immersive sound, enhancing your viewing experience.
PDF
Download
Document
Advertisement
Advertisement
01-12_EN 1/9/04 8:02 PM Page 3 Y O U R N E W TV Rear Panel Jacks Use the rear panel jacks to connect an A/V component that will be connected continuously, such as a VCR or a DVD player. POWER INPUT TV ANTENNA VIDEO INPUT Connect to an antenna or to a cable TV system. Connect a video signal from a camcorder or VCR. COMPONENT Connect component video/audio from a DVD player.(only 480i) AUDIO INPUT Connect audio signal from a camcorder or VCR. WALL MOUNT HOLES SUPER VIDEO INPUT KENSINGTON LOCK Connect S-Video signal from a camcorder or VCR. English-1 01-12_EN 1/9/04 8:02 PM Page 10 I N S TA L L AT I O N Connecting a VCR These instructions assume that you have already connected your TV to an antenna or a cable TV system . Skip step 1 if you have not yet connected to an antenna or a cable system. 1 Unplug the cable or antenna from the back of the TV. 2 Connect the cable or antenna to the ANTENNA IN terminal on the back of the VCR. 3 Connect a coaxial cable between the ANTENNA OUT terminal on the VCR and the antenna terminal on the TV. A coaxial cable is usually included with a VCR. (If not, check your local electronics store). 4 Connect a set of audio cables between the AUDIO OUT jacks on the VCR and the AUDIO jacks on the TV. If you have a “mono” (non-stereo) VCR, use the Y-connector (not supplied) to hook up to the left and right audio input jacks of the TV. If your VCR is stereo, you must connect two cables. 5 Connect a video cable between the VIDEO OUT jack on the VCR and the VIDEO jack on the TV. Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape. # Each external input source device has a different back panel configuration. English-2 01-12_EN 1/9/04 8:02 PM Page 11 I N S TA L L AT I O N Connecting an S-VHS VCR Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR. (This connection delivers a better picture as compared to a standard VHS VCR.) 1 To begin, follow steps 1–3 in the previous section to connect the antenna or cable to your VCR and your TV. 2 Connect a set of audio cables between the AUDIO OUT jacks on the VCR and the AUDIO INPUT jacks on the TV. 3 Connect an S-video cable between the S-VIDEO OUT jack on the VCR and the S-VIDEO INPUT jack on the TV. An S-video cable is usually included with an S-VHS VCR. (If not, check your local electronics store.) # Each external input source device has a different back panel configuration. English-3 01-12_EN 1/9/04 8:02 PM Page 12 I N S TA L L AT I O N Connecting a DVD Player The rear panel jacks on your TV make it easy to connect a DVD player to your TV. 1 Connect a set of audio cables between the L, R AUDIO INPUT jacks on the TV and the AUDIO OUT jacks on the DVD player. 2 Connect a video cable between the COMPONENT (Y, Pb, Pr) jacks on the TV and the Y, Pb, Pr jacks on the DVD player. Note: For an explanation of Component video, see your DVD player owner's manual. The Component input on the TV is 480i only. # Each external input source device has a different back panel configuration. English-4 39-43_EN 1/9/04 8:04 PM Page 39 Attaching a Wall or Arm mounting device The TV supports VESA mounting standard for use with various VESA mounting devices. To install any VESA mounting device, please follow the instructions given. <A> <B> 1 Lay the LCD TV face-down on a flat surface with a cushion or other soft materials to protect the screen. 2 Remove all cables connected on the TV. 3 Remove the four screws and then remove the Stand from the LCD TV. (refer to pictures A&B). 4 Re-connect all cables you removed in step 2. 5 Now you are ready to install Wall/Arm mounting device . Maintenance of Your LCD TV WARNING: To avoid risk of electric shock, do not disassemble the TV cabinet. Users cannot service the TV. User maintenance is restricted to cleaning as explained below: Unplug the monitor from the power outlet before cleaning. • To clean your flat panel display screen, lightly dampen a soft, clean cloth with water or mild detergent. If possible, use a special screen cleaning tissue or solution suitable for the antistatic coating. • To clean the monitor cabinet, use a cloth lightly dampened with a mild detergent. • Never use flammable cleaning material to clean your LCD TV or any other electrical apparatus. English-5 39-43_EN 1/9/04 8:04 PM Page 40 Installing VESA compliant mounting devices Refer to previous page to remove the base. Rear cover Mounting pad Align the mounting interface pad with the holes in the rear cover mounting pad and secure it with the four screws that come with the arm-type base, wall mount hanger or other bases. Wall Mount Instructions The following instructions apply to a hollow sheet-rock wall only. Tools/Hardware needed - Philips screwdriver, four toggle bolts, 5/8in dia. Drill bit and drill. Contact Ergotron at (800) 888-8458 to purchase the triple pivot direct mount adapter and wall mount bracket kit. • LTN1535 (15") : • LTN1735 (17") : • LTP2035 (20") : No. No. No. No. No. No. 47 97 47 97 47 97 - 007 101 007 101 007 101 - 099 003 099 003 099 003 (Pivot direct mount adapter) (Wall mount bracket kit) (Pivot direct mount adapter) (Wall mount bracket kit) (Pivot direct mount adapter) (Wall mount bracket kit) Align the wall mount bracket on the wall at the desired height, making sure that the bracket will be mounted between the wall studs. Mark the four corner openings and drill four 5/8-diameter holes. Assemble the wall mount kit according to the instructions provided with it. Securely attach Ergotron’s flat panel, triple pivot direct mount adapter to the back of the TV using the four 4mm, .7 pitch x 10mm screws provided with the arm. Secure the assembly to the wall using four 3/16 by 3-inch long toggle bolts. English-6 39-43_EN 1/9/04 8:04 PM Page 41 APPENDIX Using the Anti-Theft Kensington Lock Cable Figure 2 Figure 1 <Optional> The Kensington lock is a device used to physically fix the system when using it in a public place. The locking device has to be purchased separately. The appearance and locking method may differ from the illustration depending on the manufacturer. Please refer to the manual provided with the Kensington lock for proper use. 1 Insert the locking device into the Kensington slot on the LCD TV (Figure 1), and turn it in the locking direction (Figure 2). 2 Connect the Kensington lock cable. 3 Fix the Kensington lock to a desk or a heavy stationary object. Retractable Stand Note: The maximum tilt angle is 13 degrees in the backward direction. Please do not tilt the TV outside the specified range. Using excessive force to tilt the TV may cause permanent damage to the mechanical part of the stand. English-7 ">

Public link updated
The public link to your chat has been updated.
Advertisement