Samsung | MWR-ZS10N | Samsung MWR-ZS10 Manual de Usuario

Zone controller
MWR-ZS00✴
MWR-ZS10✴
Air Conditioner
user manual
This manual is made with 100% recycled paper.
imagine the possibilities
Thank you for purchasing this Samsung product.
G-116338 REV. 2
ZC_MWR-ZS00_IB_G116338_REV2_CO_EN.indd 3
2014-10-30 오전 11:20:30
Contents
Preapartion
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Name of the parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Basic function
Basic operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Controlling individual zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Other functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Schedule
Setting the current time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Setting the timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Setting
Using the Smart tuning function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Checking the error . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Resetting the filter cleaning alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
User mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
ENGLISH-2
ZC_MWR-ZS00_IB_G116338_REV2_EN.indd 2
2014-11-26 오후 1:46:17
PREAPARTION
Safety Precautions
Before using the Zone controller, read the instructions in this booklet carefully.
Keep this user manual with the installation manual in a handy and safe place. If the user of this product changes, hand over
the manuals to the new user.
Never attempt to install the air conditioning system or move the Zone controller by yourself.
Hazards or unsafe practices that may result in severe personal injury or death.
CAUTION
Hazards or unsafe practices that may result in minor personal injury or property damage.
PREAPARTION
WARNING
SEVERE WARNING SIGNS
ffDo not attempt to install or repair this product by yourself.
ffThis product contains no user-serviceable parts. So always consult an authorized service personnel for repairs.
ffWhen moving, consult an authorized service personnel for disconnection and re-installation of the Zone controller.
ffEnsure that the wall is strong enough to support the weight of the Zone controller.
ffInstall the product using the proper electric power.
ffIn the event of a malfunction (burning smell, etc.), immediately stop the operation, turn off the electrical breaker, and
consult an authorized service personnel.
CAUTION SIGNS
ffDo not install this product in places where it will come into contact with volatile substances such as machine oil, benzene,
gasoline or naphtha.
ffDo not install this product in places where it will come into contact with combustible gases such as sulfuric gas, hydrogen
gas, methane gas, etc.
ffDo not spill liquid of any kind into the Zone controller.
ffDo not operate this product with wet hands.
ffAvoid using spray products such as insecticides near this product.
ffDo not press the buttons on the Zone connector with a sharp object.
ffTo avoid disconnection, do not over-stretch the cables during installation.
ffDo not use this product for other purposes.
ffDo not clean this product with substances such as benzene or acid/alkali solvents.
ENGLISH-3
ZC_MWR-ZS00_IB_G116338_REV2_EN.indd 3
2014-11-26 오후 1:46:17
Name of the parts
Master controller (MWR-ZS00✴)
⑥
①
②
③
⑤
⑦
⑧
⑨
⑩
⑭
⑬
⑯
④
⑪
⑫
⑮
⑰
⑱
Part
⑲
⑳
㉑
㉒
Indication
①
Name and explanation
Operation mode indicator
• Selected operation mode appears
Option (Central, Defrost, Virus doctor, Screen lock) indicator
•
icon appears when indoor unit is under central control.
• icon appears when outdoor unit operates in defrost mode.
•
icon appears when virus doctor function is activated.
Indicator
②
NOTE
•
• When Virus doctor is equipped, it will turn on when
the indoor unit turns on and turn off when the
indoor unit turns off.
• You cannot turn on/off the Virus doctor by
separately by using the Zone controller.
icon appears when the screen is locked.
③
Power button
• Tap to turn on/off the indoor unit
④
Mode button
• Tap to select desired operation mode
⑤
Temperature adjustment button
• Tap + and – to increase or decrease the desired temperature
⑥
Temperature indicator
• Desired temperature appears (default setting, it can be changed.)
• Tap and hold to view current room temperature
• When Demand Response signal occurs;
-- Temperature and DRED level (1~3) will be displayed alternately in
1 second interval in Cool/Heat mode (ex:  )
-- Only DRED level (1~3) will be displayed in Fan mode (ex: )
Main Control
ENGLISH-4
ZC_MWR-ZS00_IB_G116338_REV2_EN.indd 4
2014-11-26 오후 1:46:18
Part
Indication
Fan speed adjustment button
• Tap up and down arrow to select desired fan speed
⑧
Fan speed indicator
• Selected Fan speed (Auto/Low/Medium/High) appears here
⑨
Time indicator
• Current time appears
• Used to set the time for a schedule
⑩
Timer start/end selection indicator
• Appears when selecting start/end time for a timer
⑪
Once button
• Tap to set non-repetitive timer
⑫
Repeat button
• Tap to set repetitive (weekly) timer
⑬
Select/OK button
• Tap <, > button to select options for timer and clock
• Tap OK button to set the selected options
⑭
Clock button
• Tap to set current time
⑮
Repetitive (Weekly) timer indicator
• Shows the status of the repetitive (weekly) timer
⑯
Select Day(s) button
• Tap to select the day(s) to set up repetitive (weekly) timer
Selected:
/ Not selected:
⑰
PREAPARTION
⑦
Main Control
Schedule &
Zone Setting
Name and explanation
Zone selection button
• Tap to open/close the damper for zone 1 through 8
• Tap and hold to control individual zone
Damp closed:
/ Damp opened:
• Non-repetitive timer icon
Appears when non-repetitive timer is scheduled in such zone
Not scheduled:
/ Scheduled:
• Repetitive (Weekly) timer icon
Appears when repetitive (weekly) timer is scheduled in such zone
Not scheduled:
/ Scheduled:
Options
⑱
Quiet button
• Tap to activate/deactivate Quiet mode
⑲
Away button
• Tap to activate/deactivate Away mode
• Only the text “away” appears in the model with away mode
⑳
Check button
• Displayed during the initial set up stage
• Normally inactive but blinks when checking is needed
㉑
Filter Reset (3sec) button
• Normally inactive but blinks when time is reached for filter cleaning
㉒
Screen Lock (3sec) button
• Tap and hold for 3 seconds to lock/unlock screen
ENGLISH-5
ZC_MWR-ZS00_IB_G116338_REV2_EN.indd 5
2014-11-26 오후 1:46:20
Name of the parts
Slave (Individual zone) controller (MWR-ZS10✴)
⑤
①
②
③
④
⑥
⑦
⑧
⑨
⑩
Part
Indication
①
Name and explanation
Operation mode indicator
• Slave controller does not display the operation mode of the indoor
unit. Only Auto, Cool and Heat will be displayed accordingly.
• ‘Auto’ will be displayed when the desired temperature is set to a zone
to controller the damper automatically. ‘Auto’ and ‘Heat’ or ‘Cool’ can
be displayed at the same time.
• Cool’ will be displayed when the indoor unit is operating in Cool, Dry
or Fan mode.
• ‘Heat’ will be displayed when the indoor unit is operating in Heat
mode.
Indicator
NOTE
• When the desired temperature is set to a zone,
‘Auto’ will appear however, it will disappear when
you open/close the damper manually by using the
Power button or by the master controller.
②
Screen lock indicator
• Appears when the screen is locked.
• Command cannot be executed and icon will blink for 3 seconds
when;
-- If you have selected the temperature that is beyond the range of
upper or lower temperature limit.
③
Power button
• Tap to turn on/off the damper
④
Temperature adjustment button
• Tap + and – to increase or decrease the desired temperature
• When the room temperature has not reached the desired
temperature, damper will remain open
Main Control
ENGLISH-6
ZC_MWR-ZS00_IB_G116338_REV2_EN.indd 6
2014-11-26 오후 1:46:20
Part
Indication
Name and explanation
⑥
Fan speed indicator
• Selected Fan speed (Auto /Low/Medium/High) from the master
⑦
Time indicator
• Current time appears
⑧
Repetitive (Weekly) timer indicator
• Shows the status of the repetitive (weekly) timer
⑨
Zone /Schedule indicator
• Displays current zone number
• Displays status of damper
Damp closed:
/ Damp opened:
• Non-repetitive timer icon
Appears when non-repetitive timer is scheduled in such zone
Not scheduled:
/ Scheduled:
• Repetitive (Weekly) timer icon
Appears when repetitive (weekly) timer is scheduled in such zone
Not scheduled:
/ Scheduled:
⑩
Screen Lock (3sec) button
• Tap and hold for 3 seconds to lock/unlock screen
Main Control
PREAPARTION
⑤
Temperature indicator
• Desired temperature appears (default setting, it can be changed.)
• Tap and hold to view current room temperature
ENGLISH-7
ZC_MWR-ZS00_IB_G116338_REV2_EN.indd 7
2014-11-26 오후 1:46:21
Basic operation
Turning on/off the power
Tap the Power
button to turn on/off the power.
Selecting the operation mode
Press the Mode button to set the operation mode.
ffOperation mode will be repeated in following order: Auto  Cool  Dry  Fan  Heat
ENGLISH-8
ZC_MWR-ZS00_IB_G116338_REV2_EN.indd 8
2014-11-26 오후 1:46:22
Adjusting the desired temperature
Tap the Temp +, - button to adjust the desired temperature.
ffYou can increase/decrease the temperature in 0.1/0.5/1.0 °C unit within following temperature range for each mode:
Mode
18 °C ~ 30 °C
Cool
18 °C ~ 30 °C
Dry
18 °C ~ 30 °C
Fan
Temperature adjustment is not possible
Heat
16 °C ~ 30 °C
BASIC FUNCTION
NOTE
Temperature range
Auto
• If upper/lower temperature limit was set from user mode, temperature range can be different from
information indicated above.
• If you try to set the temperature beyond upper/lower temperature limit, icon will blink for 3 seconds.
Checking the current room temperature
Tap the temperature indicator to check current room temperature.
ffDefault setting for controller was set to display desired temperature.
NOTE
• This function is not available in Fan mode.
ENGLISH-9
ZC_MWR-ZS00_IB_G116338_REV2_EN.indd 9
2014-11-26 오후 1:46:22
Basic operation
Selecting the Fan speed
Tap the Fan ∧, ∨ button to set the desired fan speed.
ffYou can select one of the following Fan speed :
Auto (
)  Low ( ) Medium ( )  High ( )
ffActual fan speed may be different for each operation mode.
Mode
Supported fan speed
Auto
Fan speed is set to auto and cannot be adjusted.
Cool
Auto, Low, Medium, High
Dry
Fan speed is set to auto and cannot be adjusted.
Fan
Auto, Low, Medium, High
Heat
Auto, Low, Medium, High
Controlling individual zone
Open/Close the damper for each zone
Tap the button for desired zone(s) to open/close the damper.
ffYou can select from Zone 1 ~ Zone 8.
ffStatus (Open/close) of the damper for each zone will be displayed as follows.
Damper open:
/ Damper close:
ENGLISH-10
ZC_MWR-ZS00_IB_G116338_REV2_EN.indd 10
2014-11-26 오후 1:46:23
Setting the temperature to open/close the damper automatically
BASIC FUNCTION
1. Tap and hold the desired Zone (1~8) button for 3 seconds.
ffWhen the desired zone is selected, border line for other zones will disappear and
only selected zone will have border line.
ffIf the selected zone already has previous temperature setting, it will be displayed
in temperature indicator.
ffIf the selected zone doesn’t have previous temperature setting, it will display the
same temperature set from the master controller.
2. Tap the Temp +, - button to set the desired temperature for the selected zone.
ffWhen the room temperature of the zone reaches the desired temperature,
damper will be closed automatically and otherwise, damper will be open.
3. Tap the OK button to end the setting.
ffWhen the temperature setting for the selected zone is complete, temperature
indicator will display the temperature set from the master controller.
ENGLISH-11
ZC_MWR-ZS00_IB_G116338_REV2_EN.indd 11
2014-11-26 오후 1:46:23
Other functions
Using the Quiet function
Quiet operation reduces noise of the operation.
Tap the Quiet button while the air conditioner is on.
ffQuiet function will be on and the button will be underlined.
ffTap the Quiet button again to cancel the Quiet function.
NOTE
• If you select Quiet function in Fan mode or from the unit that doesn’t support the function,
3 seconds.
will blink for
Using the Away function
Away operation operates indoor units for set time and turns off automatically.
Tap the Away button while the air conditioner is on.
ffAway function will be on and the button will be underlined.
ffTap the Away button again to cancel the Quiet function.
ENGLISH-12
ZC_MWR-ZS00_IB_G116338_REV2_EN.indd 12
2014-11-26 오후 1:46:24
Locking/Unlocking the screen
Tap the Screen Lock (3sec) button for 3 seconds to lock/unlock the screen.
ffYou may lock/unlock the screen anytime (whether unit is on or off).
ffWhen the screen is locked, ( ) icon will appear.
BASIC FUNCTION
ENGLISH-13
ZC_MWR-ZS00_IB_G116338_REV2_EN.indd 13
2014-11-26 오후 1:46:24
Setting the current time
1. Tap the Clock button to set the current time.
ff<, OK, > button will appear and AM will starts to blink.
2. Set AM/PM, hour, minute in order.
ffTap <, > to select the value and tap the OK button to set next item.
NOTE
• When you tap the <, > button shortly, hour and minute value will
increase or decrease by 1. However, if you tap and hold the <, > button, it
will increase or decrease by 5 and then 10.
3. Tap the Clock button again to complete the time setting.
ENGLISH-14
ZC_MWR-ZS00_IB_G116338_REV2_EN.indd 14
2014-11-26 오후 1:46:24
Setting the timer
Setting the non-repetitive timer
SCHEDULE
1. Tap the Once button.
ffWhen you tap the Once button, temperature indicator will start to blink.
2. Tap the Temp +, - button to adjust the desired temperature.
ffTemperature range for desired temperature is different for each operation mode.
ffTap OK button and move on to the next step.
3. Tap the <, > button to select Start or End.
ffSelect ‘Start’ to set the time for the air conditioner to turn on automatically.
(After setting the ‘Start’ time, you can choose to set or skip ‘End’ time setting.)
ffSelect ‘End’ to set the time for the air conditioner to turn off automatically.
(Air conditioner should be on already to set ‘End’ time only.)
ffTap OK button and move on to the next step.
4. Set the ‘Start’ time for the timer.
ffTap <, > to select the value and tap the OK button to set next item.
ffSet AM/PM, hour, minute in order.
ffAfter setting the minute, tap the OK button to move on to ‘End’ time setting.
NOTE
• Skip this step and move on to the next step if you have selected ‘End’ from
step 3.
• If the current time has already passed the set time, timer will be executed
on the next day.
ENGLISH-15
ZC_MWR-ZS00_IB_G116338_REV2_EN.indd 15
2014-11-26 오후 1:46:25
Setting the timer
5. Set the ‘End’ time for the timer.
ffTap <, > to select the value and tap the OK button to set next item.
ffSet AM/PM, hour, minute in order.
ffAfter setting the minute, tap the OK button to move on to the next step.
NOTE
• If you want to turn off the air conditioner manually, tap and hold the
> button for 3 seconds and press the OK button when the hour and
minute display as --:--.
6. Select the zone you wish to apply the timer.
ffYou can select as many zones as you want by tapping each Zone button.
ffWhen timer is applied properly, icon will appear on the left side of the zone
button.
ffAfter selecting the zone, tap the OK button to complete the timer setting.
NOTE
• Previously applied timer setting (that hasn’t been executed) will be
canceled upon adding a new (non-repetitive) timer.
• You must select at least 1 zone when you set the timer.
(If you tap the OK button without selecting a zone, all the zone indicator
will blink twice and wait for the user to select a zone.)
• Select the common zone (Default: Zone 1) if you just want to turn on the
indoor unit.
Cancelling the non-repetitive timer
Tap and hold the Once button for 3 seconds to delete existing timers.
ff‘Delete (3sec)’ is displayed under the ‘Once/Repeat’ button when the timer setting exists.
ff icon will blink for 3 seconds and it will disappear afterwards.
ffTimer is successfully deleted when icon disappears.
ENGLISH-16
ZC_MWR-ZS00_IB_G116338_REV2_EN.indd 16
2014-11-26 오후 1:46:25
Setting the repetitive (weekly) timer
1. Tap the Repeat button.
ffWhen you tap the Repeat button, temperature indicator will start to blink.
SCHEDULE
2. Tap the Temp +, - button to adjust the desired temperature.
ffTemperature range for desired temperature is different for each operation mode.
ffTap OK button and move on to the next step.
3. Tap the <, > button to select Start or End.
ffSelect ‘Start’ to set the time for the air conditioner to turn on automatically.
(After setting the ‘Start’ time, you can choose to set or skip ‘End’ time setting.)
ffSelect ‘End’ to set the time for the air conditioner to turn off automatically.
(Air conditioner should be on already to set ‘End’ time only.)
ffTap OK button and move on to the next step.
4. Set the ‘Start’ time for the timer.
ffTap <, > to select the value and tap the OK button to set next item.
ffSet AM/PM, hour, minute in order.
ffAfter setting the minute, tap the OK button to move on to ‘End’ time setting.
NOTE
• Skip this step and move on to the next step if you have selected ‘End’ from
step 3.
ENGLISH-17
ZC_MWR-ZS00_IB_G116338_REV2_EN.indd 17
2014-11-26 오후 1:46:26
Setting the timer
5. Set the ‘End’ time for the timer.
ffTap <, > to select the value and tap the OK button to set next item.
ffSet AM/PM, hour, minute in order.
ffAfter setting the minute, tap the OK button to move on to the next step.
NOTE
• If you want to turn off the air conditioner manually, tap and hold the
> button for 3 seconds and press the OK button when the hour and
minute display as --:--.
6. Tap <, > button to select the day to apply the timer.
ffDisplay may differ depending on the previously set weekly timer.
: No weekly timer has been set.
: One weekly timer has been set.
: Two weekly time has been set and cannot add another timer.
ffTap Select Day(s) button after selecting the day, will become when timer is
successfully added.
ffTap < , > button again to select another day and tap Select Day(s) button again
to add the timer.
ffWhen finished applying the timer to desired day(s), tap the OK button to
complete the setting and move on to the next step.
NOTE
• You may select as many days as you want but cannot select same day
twice.
• If you tap the OK button without selecting a day, all the active schedule
indicator will blink twice (1 time per second) and wait for the user to
select a day.
7. Select the zone you wish to apply the timer.
ffYou can select as many zones as you want by tapping each Zone button.
ffWhen timer is applied properly, icon will appear on the right side of the zone
button.
ffAfter selecting the zone, tap the OK button to complete the timer setting.
NOTE
• You must select at least 1 zone when you set the timer.
(If you tap the OK button without selecting a zone, all the zone indicator
will blink twice and wait for the user to select a zone.)
• Select the common zone (Default: Zone 1) if you just want to turn on the
indoor unit.
ENGLISH-18
ZC_MWR-ZS00_IB_G116338_REV2_EN.indd 18
2014-11-26 오후 1:46:27
Cancelling the repetitive (weekly) timer
1. Tap and hold the Repeat button for 3 seconds to delete existing timers.
ff‘Delete (3sec)’ is displayed under the Once/Repeat button when the timer setting
exists.
SCHEDULE
2. Tap the <, > button to select the day you want to delete the timer.
ffZones that applied the selected timer will be displayed.
ff icon will blink for 3 seconds and it will disappear afterwards.
ffTimer is successfully deleted when icon disappears.
ffTap Select Day(s) button after selecting the day, will become when timer is
successfully removed.
ffTap < , > button again to select another day and tap Select Day(s) button again
to remove the timer.
ffWhen finished removing the timer on desired day(s), tap the OK button to
complete the setting.
ENGLISH-19
ZC_MWR-ZS00_IB_G116338_REV2_EN.indd 19
2014-11-26 오후 1:46:27
SETTING
Using the Smart tuning function
Smart tuning function adjusts the fan speed.
1. Tap and hold the Mode button for more than 5 seconds.
ff<, OK, > button will appear and number on the temperature indicator will starts
to blink.
2. Tap <, > button to set the level for air volume.
ffDefault value is set to 0.
ffYou can select from 5 different levels. (-2, -1, 0, 1, 2)
ffSelect larger number if you feel that air volume is weak and small number when
too strong.
ENGLISH-20
ZC_MWR-ZS00_IB_G116338_REV2_EN.indd 20
2014-11-26 오후 1:46:27
Checking the error
When there’s any error, Check button will start to blink and you can check the error code.
Tap and hold the Check button for 3 seconds.
ffError code will be displayed.
ffWhen all the error is cleared, the Check button will disappear.
SETTING
Zone controller error codes
Display
Description
Communication error between Zone controller and indoor unit after successful communication.
No communication between Master (Main) and Slave (Sub) Zone controllers.
No communication between Zone controller and indoor unit.
Two or more Zone controllers is set as Master (Main).
Zone controller(s) has different temperature unit setting with indoor unit.
ENGLISH-21
ZC_MWR-ZS00_IB_G116338_REV2_EN.indd 21
2014-11-26 오후 1:46:28
Resetting the filter cleaning alarm
After the air conditioner is operated for certain period of time, the Filter Reset (3sec) button will blink to alert the user that
it’s time to clean the filter.
Tap and hold the Filter Reset (3sec) button for 3 seconds.
ffFilter cleaning alarm will be reset and the Filter Reset (3sec) button will disappear.
User mode
Setting menu and descriptions of user mode
You can check and/or change below settings from the user mode.
Tap and hold the Mode and Once button for 3 seconds to enter the user mode.
Main Sub
Menu Menu
2
Function
SEG No.
Default
Unit
Lower temperature
12
16
Upper temperature
34
30
1
2
3
0
0
0
16~30°C
61~86°F
18~30°C
65~86°F
0 - Disable, 1 - Enable
0 - Disable, 1 - Enable
0 - Disable, 1 - Enable
4
0
0 - Disable, 1 - Enable
-
5
0
0 - Disable, 1 - Enable
-
6
0
0 - Disable, 1 - Enable
-
10/01/01
00~99/1~12/1~31
Year,
Month,Day
Temperature limit
All Lock
Power button lock
Mode button lock
Temperature button
Partial button lock
lock
Fan speed button lock
Schedule button
(Once/Repeat) lock
3
Description
1
Current date setting (Year/Month/day)
12/34/56
2
Current time setting (Day/hour/minute)
day, AM/PM,
12/34
4
Fri/
Sun~Sat/
PM/12/00 AM~PM/0~12/0~60
1°C/1°F
1°C/1°F
-
Day, Hour,
Minute
ENGLISH-22
ZC_MWR-ZS00_IB_G116338_REV2_EN.indd 22
2014-11-26 오후 1:46:28
Main Sub
Menu Menu
1
3
4
5
6
8
9
0
NOTE
Daylight saving time
application
Daylight saving time
application method
Beginning date of daylight saving time (Weekly
unit) (?Month, ?th Sunday)
Ending date of daylight saving time (Weekly
unit) (?Month, ?th Suanday)
Beginning date of daylight saving time (Daily
unit) (Month, day)
Ending date of daylight saving time (Daily unit)
(Month, day)
Check/Set backlight duration
Smart Tuning
Daylight saving time
application/ method
SEG No.
Default
Description
Unit
1
0
0 - Disable, 1 - Enable
-
2
0
12,4
03,F
12,4
10,F
12,34
0322
12,34
0922
12
12
5
0
Temperature, Time
1
0
Schedule
Reset user mode to default value (except for
current time)
2
0
0 - Weekly unit,
1 - Daily unit
1~12 (Month)
1~4th,F(Final) week
1~12 (Month)
1~4th,F(Final) week
1~12 (Month),
1~31 (Day)
1~12 (Month),
1~31 (Day)
0~30 sec.
-2 ~ +2
0 - Off, 1 - Time only,
2 - Temperature
only, 3 - Time and
temperature
0 - Off, 1 - On
1
0
0 - Diable, 1 - Reset
Displayed contents
when power is OFF
-
SETTING
2
5
Function
Month, day
Month, day
1 sec
-
-
• Refer to page 25 for detail instructions on how to change the settings from the user mode.
ENGLISH-23
ZC_MWR-ZS00_IB_G116338_REV2_EN.indd 23
2014-11-26 오후 1:46:28
User mode
Information on the setting value
ff20 digits are available to be changed in the `User Mode’, they are presented in the form of two digits per page. Press the
[>] button to move to the next page.
PAGE
DISPLAY
SEG
1
Auto
SEG1
SEG2
2
Cool
SEG3
SEG4
3
Dry
SEG5
SEG6
4
Fan
SEG7
SEG8
5
Heat
SEG9
SEG10
6
Auto
SEG11
SEG12
7
Cool
SEG13
SEG14
8
Dry
SEG15
SEG16
9
Fan
SEG17
SEG18
10
Heat
SEG19
SEG20
Start
End
1 2
15 16
SEG
SEG
ffAs the ‘Auto’ mode and ‘Start’ indicators are displayed, it
means you are setting the SEG1 and SEG2 in page 1.
ffAs the ‘Dry’ mode and ‘End’ indicators are displayed, it
means you are setting the SEG15 and SEG16 in page 8.
ENGLISH-24
ZC_MWR-ZS00_IB_G116338_REV2_EN.indd 24
2014-11-26 오후 1:46:28
How to change the settings from the user mode
1. Tap and hold the Mode and Once button for 3 seconds.
ffYou will enter the user mode and number of main menu (“1”) will be blinking.
2. Select the Main menu.
ffTap ∧, ∨ button to select desired value.
ffTap > button to move to next page (item).
3. Select the sub men.
ffThis may not be available when there is no sub menu under main menu.
ffTap ∧, ∨ button to select desired value.
ffTap > button to move to next page (item).
ffTap < or Away button to move to previous page (item).
4. Change the setting.
ffTap ∧, ∨ button to select desired value.
ffFor some settings, you may have to select days (Sun~Sat) and time (AM/PM, hour,
minute) by tapping ∧, ∨ button.
ffTap > button to move to next page (item).
5. Tap the OK button to complete the setting.
6. Tap the Away button to exit the user mode.
NOTE
• When
to.
icon blinks for 3 seconds after tapping the > button, it means there is no more page that you can move
ENGLISH-25
ZC_MWR-ZS00_IB_G116338_REV2_EN.indd 25
2014-11-26 오후 1:46:29
MEMO
ENGLISH-26
ZC_MWR-ZS00_IB_G116338_REV2_EN.indd 26
2014-11-26 오후 1:46:29
MEMO
ENGLISH-27
ZC_MWR-ZS00_IB_G116338_REV2_EN.indd 27
2014-11-26 오후 1:46:29
ZC_MWR-ZS00_IB_G116338_REV2_CO_EN.indd 2
2014-10-30 오전 11:20:30
Download PDF