Samsung | HT-Z210 | Samsung HT-Z210T Quick start guide

quick start guide
2 remote control functions
5.1CH Digital
Home Cinema System
HT-Z210
HT-TZ212
HT-TZ215
HT-Z310
HT-TZ312
HT-TZ315
1 disc playback
2 remote control functions
3 connecting the speakers
4 connecting the video out to your tv
5 connecting audio from external components
6 listening to radio
1
2
DVD RECEIVER
DVD
PORT
3
19
20
21
4
5
6
7
22
REMAIN
STEP
PAUSE
23
24
25
26
27
9
) button to open the disc tray.
2. Load a disc.
• Place a disc gently into the tray with the disc’s label facing up.
3. Close the compartment by pressing the OPEN/CLOSE (
button again.
• Playback starts automatically.
)
2
4
28
1. Press the OPEN/CLOSE (
1
3
8
1 disc playback
18
29
10
AUDIO
SUB
TITLE
30
11
31
12
32
13
14
P.BASS
33
5
35
17
36
You can operate your DVD receiver with the
remote control.
19
TV button
20
You can operate your Samsung TV with the
remote control.
POWER button
Press to turn the Home Cinema or your
Samsung TV On/Off.
Number (0~9) buttons
Number 8 button: COMPONENT SEL.
Number 0 button: VIDEO SEL.
7
8
The picture moves forward one frame
each time the button is pressed during
playback.
Tune in radio broadcasting, skip the
song/scene.
VOLUME button
Press + to raise the volume and – to
lower it.
MENU button
10
AUDIO button
12
22
23
Press to see the menu.
24
Press to memorize radio frequencies.
Press to select SD or HD mode.
13
ZOOM button
14
P.BASS button
15
SLEEP button
Enlarges the picture during disc playback.
25
16
17
Press to pause.
In case of HT-Z310
STOP button
Press to stop.
AUX IN 2
Press to select the channel or to tune in
radio broadcasting.
Cursor/ENTER button
Used to select or move up/down, left/
right when setting the menu function.
29
SUBTITLE button
30
EXIT button
Press to exit the setup screen.
31
32
33
34
35
36
Press to mute the sound.
Front Speaker (R)
Front Speaker (L)
Rear Speaker (R)
Rear Speaker (L)
Press to return to the previous menu.
Selects the disc subtitle language.
INFO button
View or change disc playback information
on screen.
Subwoofer
SOUND EDIT button
Adjust the speaker sound settings and
level.
REPEAT button
Repeat playback of a chapter, title, group
or track.
DSP/EQ button
Digital Signal Processor/Equalizer functions in STEREO mode.
 Do not let children play with or near the speakers. They could get hurt if a speaker falls.
 When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct.
 Keep the subwoofer speaker out of reach of children so as to prevent children from inserting their hands or alien
substances into the duct (hole) of the subwoofer speaker.
 Do not hang the subwoofer on a wall through the duct (hole).
LOGO button
You can make your own TV wallpaper
(screen saver).
DIMMER button
The front display brightness will be
adjusted.
M
If you place a speaker near your TV set, screen color may be distorted because of the magnetic field generated
by the speaker. If this occurs, place the speaker away from your TV set.
Press to listen to radio broadcasting.
AUX button
Press to select external audio input.
1 - English
2 - English
Center Speaker
TUNING/CH button
28
Press to select the DVD mode.
TUNER button
Red
PAUSE button
RETURN button
DVD button
18
Black
Used to cancel a wrong entry.
27
PL II EFFECT button
Adjusts the Dolby Pro Logic II audio
effect.
3. Connect the connecting plugs to the back of the Home Cinema.
• Make sure the colors of the speaker terminals match the colors of the connecting
plugs.
CANCEL button
MUTE button
MO/ST button
You can listen to radio broadcasts in
MONO or STEREO.
Press TV/VIDEO button to select the Video
input on your TV.
26
SLOW button
Selects three different slow motion
playback speeds.
TV/VIDEO button
Fast backward or forward
through a song/scene.
Provides more powerful bass.
Press to set the sleep off time.
OPEN/CLOSE button
2. Insert the black wire into the black terminal (–) and the red wire into the red (+) terminal,
and then release the tab.
SEARCH buttons
Allows you to select six different Dolby
Pro Logic II audio modes.
TUNER MEMORY, SD(Standard
Definition)/HD(High Definition) button
Press to select the USB mode.
1. Press down the terminal tab on the back of the speaker.
Press to play.
Selects the Disc’s Audio language.
PL II MODE button
PORT button
PLAY button
Tuning Preset/CD Skip buttons
9
11
21
REMAIN button
You can check the elapsed or
remaining time on a disc.
STEP button
6
34
15
16
DVD RECEIVER button
3 connecting the speakers
3 - English
4 connecting the video out to your tv
5 connecting audio from external components
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
Choose one of the four methods for connecting to a TV.
1. Connect the Digital Input (OPTICAL) on the
Home Cinema to the Digital Output of the
external digital component.
AUX1 : Connecting an External Component/MP3 player
Components such as an MP3 Player
2. Press the AUX button on the remote control to
select DIGITAL IN.
• You can also use the FUNCTION button on the
main unit.
The mode switches as follows :
1. Connect AUX IN 1 (Audio) on the Home Cinema to the Audio Out
of the external component/MP3 player.
AUX IN 1
AUX IN 2
AUX IN 2
Optical Cable (not supplied)
2. Press the AUX button on the remote control to select AUX1 input.
• You can also use the FUNCTION button on the main unit.
The mode switches as follows :
DVD/CD ➞ D.IN ➞ AUX 1 ➞ AUX 2 ➞USB ➞ (BT AUDIO) ➞ FM.
AUX IN 2
AUX IN 2
Audio Cable
(not supplied)
DVD/CD ➞ D.IN ➞ AUX 1 ➞ AUX 2 ➞USB ➞
(BT AUDIO) ➞ FM.
External Digital Component
Audio OUT
METHOD4
(supplied)
METHOD1
METHOD2
METHOD3
M
6 listening to radio
HT-Z210/TZ212/TZ215 doesn't support Bluetooth function.
Connecting the FM Antenna
AUX2 : Connecting an External Analog Component
1. Connect the FM antenna supplied to the FM 75Ω COAXIAL Jack.
2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid
surface.
Analog signal components such as a VCR.
METHOD 1 : HDMI (Option)
Connect the HDMI cable (not supplied) from the HDMI OUT jack on the back of the DVD Player to the HDMI IN jack on your TV.
METHOD 2 : Component Video
If your television is equipped with Component Video inputs, connect a Component video cable(not supplied) from the Component Video
Output (Pr, Pb and Y) jacks on the back of the DVD Player to the Component Video Input jacks on your TV.
METHOD 3 : Scart (Option)
If your television is equipped with a SCART input, connect a SCART (not supplied) from the AV OUT jack on the back panel of the main
unit to the SCART IN jack on your television.
1. Connect AUX IN 2 (Audio) on the Home
Cinema to the Audio Out of the external
analog component.
• Be sure to match connector colors.
Listening to Radio
AUX IN 2
Remote Control
AUX IN 2
1. Press the TUNER button to select the FM band.
2. Press the AUX button on the remote
control to select AUX 2 input.
• You can also use the FUNCTION button
on the main unit.
The mode switches as follows :
DVD/CD ➞ D.IN ➞ AUX 1 ➞ AUX 2 ➞USB ➞
(BT AUDIO) ➞ FM.
METHOD 4 : Composite Video
Audio Cable (not supplied)
If the external analog
component has only one Audio
Out, connect either left or right.
Main Unit
External Analog Component
Connect the supplied Video cable from the VIDEO OUT jack on the back of the DVD Player to the VIDEO IN jack on your TV.
M
Resolutions available for the HDMI output are 480p, 576p, 720p,1080i/1080p.
 This product operates in Interlace scan mode (576i, 480i) for component output.
 If you use an HDMI cable to connect a Samsung TV to the DVD Player, you can operate the Home Cinema using the TV's
M
You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR
to this product.
remote control. This is only available with SAMSUNG TVs that support Anynet+(HDMI-CEC).
 Please check the
logo (If your TV has an
1. Press the FUNCTION button to select the FM band.
2. Select a broadcast station.
• Automatic Tuning 1 : Press the STOP (¦) button to select PRESET and then press the #,$ button to select the
preset station.
• Automatic Tuning 2 : Press the STOP (¦) button to select MANUAL and then press and hold the #,$ button to
automatically search the band.
• Manual Tuning : Press the STOP (¦) button to select MANUAL and then briefly press the
button to tune in to
a lower or higher frequency.
M
logo, then it supports the Anynet+ function.)
4 - English
2. Tune in to the desired station.
• Automatic Tuning 1 : When the #,$ button is pressed, a preset broadcast station is selected.
• Automatic Tuning 2 : Press and hold the ,,. button to automatically search for active broadcasting stations.
• Manual Tuning : Briefly press the ,,. button to increase or decrease the frequency incrementally.
5 - English
This unit does not receive AM broadcasts.
6 - English
Download PDF