Samsung | WS32A116T | Samsung WS32A116T User Manual

AA68-02859B-00Eng
6/21/05
2:22 PM
Page 1
COLOUR
TELEVISION
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
TELETEXT
AA68-02859B-00Eng
6/21/05
2:22 PM
Page 2
Safety Instructions
ENG
◆ Do not expose the television to extreme temperature conditions or to extreme humidity conditions.
◆ Do not expose the television to direct sunlight and other sources of heat.
◆ Do not expose the television to any liquids.
◆ Never put objects of any kind into the television, and do not place a water-containing vessel on the
television.
◆ During a storm conditions (especially when there is lightning) unplug the television from the mains
socket and aerial.
◆ Do not step on or twist the power cord.
◆ Do not overload wall outlets or extension cords as this can result in a risk of fire or electric shock.
◆ Please use a soft and dry cloth (not containing volatile matter) when you clean the TV.
◆ If the television is broken, do not try to repair it yourself. Contact qualified service personnel.
◆ If the remote control is not used for a long period of time, remove the batteries and store it in a
cool, dry place.
◆ Do not drop the remote control.
This device is not for use in industrial environments.
Caution
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO PREVENT ELECTRICAL SHOCK,
DO NOT REMOVE REAR COVER, NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
WARNING: TO PREVENT DAMAGE WHICH MAY RESULT
IN FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
2
The lightning flash and arrow head
within the triangle is a warning sign
alerting you of “dangerous voltage”
inside the product.
The exclamation point within the
triangle is a warning sign alerting
you of important instructions
accompanying the product.
☛
The main voltage is indicated on the
rear of the TV set and the frequency is
50 or 60Hz.
AA68-02859B-00Eng
6/21/05
2:22 PM
Page 3
ENG
.
Contents
◆ FOREWORD
■
■
Safety Instructions .........................................................................................
Caution ..........................................................................................................
2
2
◆ CONNECTING AND PREPARING YOUR TELEVISION
■
■
■
■
■
■
■
■
■
■
View of Your Television (depending on the model) .......................................
Infrared Remote Control ................................................................................
Inserting the Batteries in the Remote Control................................................
Connecting to an Aerial or Cable Television Network ...................................
Switching Your Television On and Off...........................................................
Placing Your Television in Standby Mode .....................................................
Becoming Familiar with the Remote Control .................................................
Plug & Play Feature.......................................................................................
Viewing the Demonstration............................................................................
Choosing Your Language..............................................................................
5
6
7
7
8
8
9
10
11
11
◆ SETTING THE CHANNELS
■
■
■
■
■
■
Storing Channels Automatically.....................................................................
Sorting the Stored Channels .........................................................................
Storing Channels Manually............................................................................
Skipping Unwanted Channels .......................................................................
Assigning Names to Channels ......................................................................
Fine Tuning Channel Reception ....................................................................
12
13
14
16
17
18
◆ USING YOUR TELEVISION
■
■
■
■
■
■
■
■
■
■
■
Changing the Picture Standard .....................................................................
Adjusting the Picture Settings........................................................................
Activating/Deactivating the Digital Noise Reduction Feature ........................
Setting the Blue Screen.................................................................................
Using the Tilt Control Feature........................................................................
Selecting the Picture Size..............................................................................
Freezing the Current Picture .........................................................................
Changing the Sound Standard ......................................................................
Adjusting the Sound Settings ........................................................................
Extra Sound Settings ....................................................................................
(Auto volume / Melody / Turbo sound / Pseudo stereo / Virtual surround)
Selecting the Sound Mode (depending on the model) ..................................
3
19
20
21
22
22
23
23
23
24
25
26
AA68-02859B-00Eng
6/21/05
2:22 PM
Page 4
➢
ENG
Contents (continued)
◆ USING YOUR TELEVISION (continued)
■
■
■
Setting the Sleep Timer .................................................................................
Setting and Displaying the Current Time.......................................................
Switching the Television On and Off Automatically .......................................
27
28
29
◆ USING THE TELETEXT FEATURE
■
■
■
■
■
Teletext Feature ............................................................................................
Displaying the Teletext Information ...............................................................
Selecting a Page by Number.........................................................................
Using FLOF to Select a Page........................................................................
Storing Teletext Pages ..................................................................................
30
30
31
32
32
◆ ADDITIONAL INFORMATION ON CONNECTIONS
■
■
■
■
■
■
Connecting to the External Input/Outputs......................................................
Connecting to the Audio Output ....................................................................
Connecting to the RCA Input.........................................................................
Connecting to the S-Video Input....................................................................
Connecting Headphones ...............................................................................
Viewing Pictures From External Sources ......................................................
33
33
34
34
35
35
◆ RECOMMENDATIONS FOR USE
■
■
■
Automatic Degaussing to Remove Colour Patches.......................................
Troubleshooting: Before Contacting Service Personnel................................
Wiring the Mains Power Supply Plug (UK Only)............................................
Symbols
Press
4
☛
Important
➢
Note
36
36
37
AA68-02859B-00Eng
6/21/05
2:22 PM
Page 5
View of Your Television (depending on the model)
➢
The actual configuration on your TV may be different, depending on
your model.
ENG
Control Panels
Front of the TV
1
2
3
4
5
6
7
8
9
1) Input source selection
6) Next channel
2) Menu display
7) Standby indicator
3) Volume decrease
8) Remote control sensor
4) Volume increase
9) Power On/Off
5) Previous channel
Connection Panels
Side of the TV
Rear of the TV
Audio Input (R, L)
Video Input
S-Video Input
SCART Audio/Video Input/Output
Headphone connector
Monitor Audio Output
75Ω Coaxial Connector for Aerial/Cable Network
5
AA68-02859B-00Eng
6/21/05
2:22 PM
Page 6
Infrared Remote Control
ENG
Y
yo
TELEVISION STAND-BY
PICTURE SIZE/
TELETEXT SIZE SELECTION
SOUND MODE SELECTION/
TELETEXT SUB-PAGE
TELETEXT DISPLAY/
MIX BOTH TELETEXT INFORMATION
AND THE NORMAL BROADCAST
AUTOMATIC SWITCH-OFF/
TELETEXT STORE
DIRECT CHANNEL SELECTION
ONE/TWO-DIGIT CHANNEL
SELECTION/
TELETEXT PAGE HOLD
VOLUME INCREASE
TEMPORARY SOUND SWITCH-OFF
VOLUME DECREASE
TUNER/CABLE NETWORK
SELECTION
MENU DISPLAY/
PROGRAMME SELECTION BY NAME
SWITCH REPEATEDLY
BETWEEN THE LAST TWO
CHANNELS DISPLAYED
NEXT CHANNEL/
TELETEXT NEXT PAGE
EXTERNAL INPUT SELECTION/
TELETEXT MODE SELECTION
(LIST/FLOF)
PREVIOUS CHANNEL/
TELETEXT PREVIOUS PAGE
INFORMATION DISPLAY/
TELETEXT REVEAL
EXIT FROM ANY DISPLAY
MOVE TO THE REQUIRED MENU
OPTION/
ADJUST AN OPTION VALUE
RESPECTIVELY
SOUND MENU DISPLAY
TURBO SOUND
FASTEXT TOPIC SELECTION
CHANGE CONFIRMATION
SOUND EFFECT SELECTION
PICTURE EFFECT SELECTION
STILL PICTURE
NOT AVAILABLE
➢
6
The performance of the remote control may be affected by bright light.
T
th
AA68-02859B-00Eng
6/21/05
2:22 PM
Page 7
Inserting the Batteries in the Remote Control
ENG
You must insert or replace the batteries in the remote control when
you:
◆ Purchase the television
◆ Find that the remote control is no longer operating
correctly
1
Remove the cover on the rear of the remote control by pressing
the symbol ( ) downwards and then pulling firmly to remove it.
2
Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking
care to respect the polarities:
◆ - on the battery against - on the remote control
◆ + on the battery against + on the remote control
3
Replace the cover by aligning it with the base of the remote
control and pressing it back into place.
Connecting to an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by
the set from one of the following sources:
◆ An outdoor aerial
◆ A cable television network
◆ A satellite network
1
In the first three cases, connect the aerial or network input cable to
the 75Ω coaxial socket on the rear of the television.
2
If you are using an indoor aerial, you may need to turn it when
tuning your television until you obtain a picture that is both sharp
and clear.
For further details, refer to:
◆ “Storing Channels Automatically ” on page 12
◆ “Storing Channels Manually” on page 14
Rear of the TV
or
Cable Television
Network
7
AA68-02859B-00Eng
6/21/05
2:22 PM
Page 8
Switching Your Television On and Off
ENG
The mains lead is attached to the rear of your television.
☛
1
If you have purchased this television in the United
Kingdom, refer to page 37 for further instructions on
plug wiring.
Plug the mains lead into an appropriate socket.
➢
2
The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
Press the “
Result:
3
T
” button (On/Off) on the front of the television.
The Standby indicator on the front of the television
lights up.
Press the POWER (
television on.
Result:
) button on the remote control to switch the
The programme that you were watching last is reselected automatically.
you have not yet stored any channels, No clear picture
➣ Ifappears.
Refer to “Storing Channels Automatically” on page
12 or “Storing Channels Manually” on page 14.
4
To switch your television off, press the “
” button (On/Off) again.
Placing Your Television in Standby Mode
Your television can be placed in Standby mode, in order to reduce:
◆ Power consumption
◆ Wear of the cathode ray tube
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1
Press the POWER (
Result:
2
) button on the remote control.
The screen is turned off and the Standby indicator on
the front of the television lights up in red.
To switch the television back on, simply press the POWER (
button again.
➣ You can also switch on by pressing the P
☛
8
or
)
button.
Do not leave your television in Standby mode for long
periods of time (when you are away on holiday, for
example). Turn your television off by pressing the “ ”
button (On/Off) on the front of the television. It is best to
unplug the set from the mains and aerial.
T
th
e
AA68-02859B-00Eng
6/21/05
2:22 PM
Page 9
Becoming Familiar with the Remote Control
ENG
The remote control is used mainly to:
◆ Change channels and adjust the volume
◆ Set up the television using the on-screen menu system
The following table presents the most frequently used buttons and
their functions.
Button
Viewing Function
Menu Function
Used to display the next
stored channel.
-
Used to display the previous stored channel.
to
-/--
PRE-CH
Used to display the corresponding channels.
Used to select a channel numbered ten or over.
Press this button, and the “--” symbol is displayed.
Enter the two-digit channel number.
Press the PRE-CH button. The TV will switch to the last
channel viewed.
To quickly switch between two channels that are far apart,
tune to one channel, then use the number button to select
second channel. Then, use the PRE-CH button to quickly
alternate between them.
Used to increase the
volume.
-
Used to decrease the
volume.
-
MUTE
Used to switch the sound off temporarily.
To turn the sound back on, press this button again, or
press the
or
button.
MENU
Used to display the
on-screen menu system.
Used to return to the previous
menu or normal viewing.
-
Used to:
◆ Display a submenu
containing selections for
the current menu option
◆ Increase/decrease a
menu option value
-
Used to confirm your choice.
-
Used to exit from the menu
system and return to normal
viewing directly.
Used to switch the
television on when it is
in Standby mode.
Used to exit from the menu
system and return to normal
viewing directly
:
EXIT
TV
➣
9
AA68-02859B-00Eng
6/21/05
2:22 PM
Page 10
Plug & Play Feature
ENG
When the television is initially powered on, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
Plug & Play
1
Ant. Input Check
If the television is in Standby mode, press the POWER (
on the remote control.
Result:
œ √ Move
Exit
2
Auto store
TV
Country
Search
➣
3
œ √ Adjust
Move
Exit
Clock
Timer
: -- : -: Off
Exit
5
6
Refer to “Storing Channels Automatically” on page 12.
Refer to “Setting and Displaying the Current Time” on page
28.
When you have finished, press the MENU (
Result:
TV
7
Setup
Plug & Play
Language
Blue Screen
Demonstration
Tilt
√
√
: On
√
: 0
œ √ Enter
Exit
The message Enjoy your watching is displayed,
and then the channel which has been stored will be
activated.
1
Press the MENU (
2
Press the ▼ or ▲ button to select Setup, and then press the
œ or √ button.
3
) button.
The Plug & Play is selected.
Press the œ or √ button again.
Result:
10
) button.
If you want to reset this feature...
Result:
Move
The Time menu is displayed with Clock is selected.
Press the œ or √ button to move to the hour or minute. Set the
hour or minute by pressing the ▼ or ▲ button.
➣
Enjoy your watching.
The Auto store menu is displayed with Country is
selected.
Select your country by pressing the œ or √ button. To search the
channels, select Search by pressing the ▼ or ▲ button, and then
press the œ or √ button. Press the MENU ( ) button to stop the
search.
➣
œ √ Adjust
The message Ant. Input Check is displayed.
Make sure that the antenna is connected to the TV.
Press the œ or √ button.
Result:
Move
The message Plug & Play is displayed. It flickers for
a little while and then Language menu is automatically
displayed.
If any language is not selected on the Language menu, the
Language menu will disappear about 30 seconds later.
Result:
4
Time
TV
) button
Select the appropriate language by pressing the ▼ or ▲ button.
Press the MENU ( ) button to enter the language.
Result:
: Others
: -/+
T
te
This feature starts with the message Plug & Play
is displayed.
W
se
in
AA68-02859B-00Eng
6/21/05
2:22 PM
Page 11
Viewing the Demonstration
ENG
To become familiar with the various menus provided by your
television, you can view the inbuilt demonstration.
1
n
r
y
Press the MENU (
Result:
2
) button.
The main menu is displayed.
Press the ▼ or ▲ button to select Setup.
Result:
The options available in the Setup group are
displayed.
3
Press the œ or √ button.
4
Press the ▼ or ▲ button to select Demonstration.
5
Press the œ or √ button.
Result:
➣
TV
Setup
Plug & Play
Language
Blue Screen
Demonstration
Tilt
Each of the menu options is displayed in turn.
When you wish to exit from the demonstration, press the
EXIT ( ) button on the remote control.
Move
œ √ Enter
√
√
: On
√
: 0
Exit
Choosing Your Language
When you start using your television for the first time, you must
select the language which will be used for displaying menus and
indications.
1
Press the MENU (
Result:
2
The main menu is displayed.
Setup
Plug & Play
Language
Blue Screen
Demonstration
Tilt
√
√
: On
√
: 0
Press the ▼ or ▲ button to select Setup.
Result:
e
) button.
TV
The options available in the Setup group are
displayed.
3
Press the œ or √ button.
4
Press the ▼ or ▲ button to select Language.
5
Select the appropriate language by pressing the œ or √ button
repeatedly.
Move
œ √ Enter
y
11
Exit
AA68-02859B-00Eng
6/21/05
2:22 PM
Page 12
Storing Channels Automatically
ENG
TV
Channel
√
√
√
√
√
√
Auto store
Manual store
Add/Erase
Sort
Name
Fine tune
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or desired
programme numbers. However you can sort numbers manually and
clear any channels you do not wish to watch.
1
Press the MENU (
Result:
Move
œ √ Enter
Press the ▼ or ▲ button to select Channel.
Result:
Auto store
Country
Search
: Others
: -/+
3
4
œ √ Adjust
Auto store
TV
Country
Search
Move
P 1 C -- ----106 MHz
Select your country by pressing the œ or √ button. The countries
are displayed in the following order: Others - Belgie Deutschland - España - France - Italia - Nederland Schweiz - Sverige - UK - East Europe
6
Press the ▼ or ▲ button to select Search.
7
Press the œ or √ button to start the search.
Exit
Result:
7 %
➢
8
Move
To stop the search before it has finished, press the MENU
( ) button.
When searching and storing are complete, the Sort menu is
displayed.
◆ To exit from the channel store function without sorting the
channels, press the MENU ( ) button repeatedly until the
menus disappear.
Sort
From
To
Store
The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range. Finally, the search will end
automatically.
◆ To sort the stored channels into the desired numerical order,
go to Step 6 of the “Sorting the Stored Channels” procedure
on page 13.
Exit
TV
The options available in the Auto store group are
displayed with Country is selected.
5
: Others
: -/+
œ √ Search
The Auto store is selected.
Press the œ or √ button again.
Result:
Exit
The options available in the Channel group are
displayed.
Press the œ or √ button.
Result:
Move
The main menu is displayed.
Exit
2
TV
) button.
: P 1 ----: P-- ----: ?
œ √ Adjust
12
Exit
9
When the channels have been stored, you can:
◆
◆
◆
◆
◆
Sort them in the order required (refer to page 13)
Clear a channel (refer to page 16)
Assign a name to the stored channels (refer to page 17)
Fine tune channel reception if necessary (refer to page 18)
Activate the Digital Noise Reduction feature (refer to page 21)
T
st
st
AA68-02859B-00Eng
6/21/05
2:22 PM
Page 13
Sorting the Stored Channels
ENG
This operation allows you to change the programme numbers of
stored channels. This operation may be necessary after using auto
store. You can delete the channels you do not want to keep.
TV
d
e
1
Press the MENU (
Result:
2
) button.
The main menu is displayed.
Press the œ or √ button.
4
Press the ▼ or ▲ button to select Sort.
5
Press the œ or √ button.
Result:
Move
The options available in the Channel group are
displayed.
3
7
Press the ▼ or ▲ button to select To. Select the new channel
number which you wish to identify by pressing the œ or √ button
repeatedly.
From
To
Store
: P 1 ----: P-- ----: ?
From
To
Store
Press the ▼ or ▲ button to select Store. Select OK to confirm the
exchange of channel numbers by pressing the œ or √ button.
The selected channel is exchanged with the one
previously stored to the chosen number.
For all the channels to move to the required channel numbers,
repeat steps 6 to 8 after selecting the From by pressing the ▼ or ▲
button.
œ √ Adjust
Exit
Sort
TV
can also select the channel number directly by pressing
➣ You
the numeric buttons (0~9).
9
Exit
Sort
TV
Move
Select the channel number that you wish to change by pressing
the œ or √ button repeatedly.
Result:
œ √ Enter
The options available in the Sort group are displayed
with From is selected.
6
8
√
√
√
√
√
√
Auto store
Manual store
Add/Erase
Sort
Name
Fine tune
Press the ▼ or ▲ button to select Channel.
Result:
Channel
Move
: P 1 ----: P 3 ----: ?
œ √ Adjust
Exit
Sort
TV
From
To
Store
Move
: P 3 ----: P 1 ----: OK
œ √ Adjust
)
13
Exit
AA68-02859B-00Eng
6/21/05
2:22 PM
Page 14
Storing Channels Manually
ENG
TV
You can store up to 100 television channels, including those
received via cable networks.
Channel
√
√
√
√
√
√
Auto store
Manual store
Add/Erase
Sort
Name
Fine tune
Move
œ √ Enter
When storing channels manually, you can choose:
◆ Whether or not to store each of the channels found
◆ The programme number of each stored channel which
you wish to identify
Exit
1
Press the MENU (
Result:
) button.
The main menu is displayed.
Manual store
TV
Prog.No.
Colour system
Sound system
Channel
Search
Store
Move
:
:
:
:
:
:
œ √ Adjust
P 3 ----Auto
BG
C 1
46MHz
?
Exit
2
Result:
Prog.No.
Colour system
Sound system
Channel
Search
Store
Move
:
:
:
:
:
:
œ √ Adjust
P 3 ----Auto
BG
C 1
46MHz
?
Press the œ or √ button.
4
Press the ▼ or ▲ button to select Manual store.
5
Press the œ or √ button.
Result:
To assign a programme number to a channel, press the œ or √
button.
7
Press the ▼ or ▲ button to select Colour system. Indicate the
broadcasting standard required by pressing the œ or √ button
repeatedly.
Exit
Result:
Prog.No.
Colour system
Sound system
Channel
Search
Store
Move
œ √ Adjust
14
:
:
:
:
:
:
P 3 ----Auto
BG
C 1
46MHz
?
Exit
The options available in the Manual store group are
displayed with Prog.No. is selected.
6
Manual store
TV
The options available in the Channel group are
displayed.
3
Manual store
TV
Press the ▼ or ▲ button to select Channel.
8
The colour standards are displayed in the following
order:
Auto - PAL - SECAM - NT4.43.
Press the ▼ or ▲ button to select Sound system. Select the
sound standard required by pressing the œ or √ button repeatedly.
Result:
The sound standards are displayed in the following
order:
BG - DK - I - L.
☛
y.
AA68-02859B-00Eng
6/21/05
2:22 PM
Page 15
Storing Channels Manually (continued)
ENG
9
If you know the number of the channel to be stored, see the
following steps.
◆ Press the ▼ or ▲ button to select Channel.
Prog.No.
Colour system
Sound system
Channel
Search
Store
◆ Press the √ button.
◆ Press the ▼ or ▲ button to select C (Air channel) or S (Cable
channel).
◆ Press the √ button.
◆ Press the ▼ or ▲ button to select indicate the required
number.
You can also select the channel number directly by
pressing the numeric buttons (0~9).
➣
➣
10
Adjust
The tuner scans the frequency range until the first
channel or the channel that you selected is received
on your screen.
11
To store the channel and associated programme number, select
Store by pressing the ▼ or ▲ button. Press the œ or √ button to
select OK.
12
Repeat Steps 9 to 11 for each channel to be stored.
Move
P 3 ----Auto
BG
C 1
46MHz
?
Exit
:
:
:
:
:
:
œ √ Search
P 3 ----Auto
BG
C 1
46MHz
?
Exit
Manual store
TV
Prog.No.
Colour system
Sound system
Channel
Search
Store
Move
☛
œ √ Move
Prog.No.
Colour system
Sound system
Channel
Search
Store
If you do not know the channel numbers, select Search by
pressing the ▼ or ▲ button. Press the œ or √ button to start the
search.
:
:
:
:
:
:
Manual store
TV
If no sound or abnormal sound, re-select the sound standard
required.
Result:
Manual store
TV
œ √ Adjust
Channel mode
◆ P (Programme mode): When completing tuning, the
broadcasting stations in your area have been assigned to
position numbers from P00 to max P99. You can select a
channel by entering the position number in this mode.
◆ C (Real channel mode): You can select a channel by
entering the assigned number to each air broadcasting station
in this mode.
◆ S (Cable channel mode): You can select a channel by
entering the assigned number for each cable channel in this
mode.
15
:
:
:
:
:
:
P 3 ----Auto
BG
C 1
46MHz
OK
Exit
AA68-02859B-00Eng
6/21/05
2:22 PM
Page 16
Skipping Unwanted Channels
ENG
TV
You can exclude the channels you chosen from the channels you
scanned. When you scan through the stored channels, those you
have chosen to skip are not displayed.
Channel
Auto store
Manual store
Add/Erase
Sort
Name
Fine tune
√
√
√
√
√
√
œ √ Enter
Move
All of the channels that you do not specifically choose to skip are
displayed during scanning.
1
Exit
Result:
2
Add/Erase
TV
P
P
P
P
1
2
3
4
:
:
:
:
Exit
Add/Erase
P
P
P
P
Move
1
2
3
4
:
:
:
:
Erased
Added
Added
Added
œ √ Adjust
16
Exit
The main menu is displayed.
The options available in the Channel group are
displayed.
3
Press the œ or √ button.
4
Press the ▼ or ▲ button to select Add/Erase.
5
Press the œ or √ button.
Result:
TV
) button.
Press the ▼ or ▲ button to select Channel.
Result:
Added
Added
Added
Added
œ √ Adjust
Move
Press the MENU (
The stored channels are displayed.
6
Press the ▼ or ▲ button to select the channel to add or erase.
If necessary, select Added or Erased by pressing the œ or √
button.
7
Repeat Step 6 for each channel to be added or erased.
C
in
yo
AA68-02859B-00Eng
6/21/05
2:22 PM
Page 17
Assigning Names to Channels
ENG
Channel names will be assigned automatically when channel
information is broadcast. These names can be changed, allowing
you to assign new names.
1
Press the MENU (
Result:
2
TV
) button.
The main menu is displayed.
Press the œ or √ button.
4
Press the ▼ or ▲ button to select Name.
5
Press the œ or √ button.
Result:
œ √ Enter
Move
The options available in the Channel group are
displayed.
3
√
√
√
√
√
√
Auto store
Manual store
Add/Erase
Sort
Name
Fine tune
Press the ▼ or ▲ button to select Channel.
Result:
Channel
Exit
Name
TV
P
P
P
P
1
2
3
4
:
:
:
:
-----------------
The current channels are displayed.
6
If necessary, select the channel to be assigned to a new name by
pressing the ▼ or ▲ button.
7
Press the œ or √ button.
8
Press the ▼ or ▲ button to select a letter (A~Z), a number (0~9) or
a symbol (-, space). Move on the previous or next letter by
pressing the œ or √ button.
9
Repeat Steps 6 to 8 for each channel to be assigned to a new
name.
œ √ Adjust
Move
TV
Exit
Name
P
P
P
P
1
2
3
4
Adjust
:
:
:
:
A----------------
œ √ Move
17
Exit
AA68-02859B-00Eng
6/21/05
2:22 PM
Page 18
Fine Tuning Channel Reception
ENG
TV
Channel
Auto store
Manual store
Add/Erase
Sort
Name
Fine tune
Move
√
√
√
√
√
√
œ √ Enter
Exit
If the reception is clear, you do not have to fine tune the channel,
as this is done automatically during the search and store operation.
If the signal is weak or distorted, you may have to fine tune the
channel manually.
1
Press the MENU (
Result:
2
) button.
The main menu is displayed.
Press the ▼ or ▲ button to select Channel.
Result:
The options available in the Channel group are
displayed.
Fine tune
TV
Tune
Store
Erase
: -/+
: ?
: ?
3
Press the œ or √ button.
4
Press the ▼ or ▲ button to select Fine tune.
5
Press the œ or √ button.
Result:
Move
œ √ Adjust
Exit
6
Fine tune
Fine tune
TV
Tune
Store
Erase
To obtain a sharp and clear picture and good sound quality, press
the œ or √ button.
Result:
7
8
œ √ Adjust
Exit
Fine tune
TV
Tune
Store
Erase
Move
: -/+
: ?
:OK
œ √ Adjust
18
Exit
OK is displayed.
To erase adjusted picture or sound, select Erase by pressing the
▼ or ▲ button. Press the œ or √ button.
Result:
Move
The horizontal bar is displayed. Move the horizontal
bar’s cursor left or right by pressing the œ or √ button.
To memorise adjusted picture or sound, select Store by pressing
the ▼ or ▲ button. Press the œ or √ button.
Result:
: -/+
: OK
: ?
The options available in the Fine tune group are
displayed with Tune is selected.
OK is displayed.
Y
v
.
AA68-02859B-00Eng
6/21/05
2:22 PM
Page 19
Changing the Picture Standard
ENG
You can select the type of picture which best corresponds to your
viewing requirements.
1
Press the MENU (
Result:
2
The options available in the Picture group are
displayed.
œ Dynamic
√
: Off
Mode
Adjust
Digital NR
Press the œ or √ button.
Result:
3
) button.
Picture
TV
The Mode is selected.
Move
œ √ Adjust
Select the required picture effect by pressing the œ or √ button
repeatedly.
Result:
➣
The following picture effects are available:
Dynamic - Standard - Movie - Custom.
You can also set these options simply by pressing the
P.MODE(
) (Picture Mode) button.
s
.
g
e
19
Exit
√
AA68-02859B-00Eng
6/21/05
2:22 PM
Page 20
Adjusting the Picture Settings
ENG
Your television has several settings which allow you to control
picture quality.
Picture
TV
œ Dynamic
√
: Off
Mode
Adjust
Digital NR
Move
œ √ Enter
√
Exit
Adjust
TV
Contrast
Brightness
Sharpness
Color
Color tone
Move
:
:
:
:
:
œ √ Adjust
Contrast
1
Press the MENU ( ) button.
The options available in the Picture group are
Result:
displayed.
2
Press the œ or √ button.
3
Press the ▼ or ▲ button to select Adjust.
4
Press the œ or √ button.
Result:
70
55
50
50
50
5
Press the ▼ or ▲ button to select the option (Contrast,
Brightness, Sharpness, Colour, Colour tone or Tint-NTSC
only) to be adjusted. Press the œ or √ button.
Result:
Exit
The options available in the Adjust group are
displayed.
The horizontal bar is displayed. Move the horizontal
bar’s cursor left or right by pressing the œ or √
button.
70
➣
Color tone
50
Cool
Warm
20
◆ If you make any changes to these settings, the picture
standard is automatically switched to Custom.
◆ The television has an “automatic degaussing” system
that is activated if magnetic interference is present.
To degauss the television screen, switch power off by
pressing the “ ” (On/Off) button on the front panel.
(Refer to “Automatic Degaussing to Remove Colour
Patches” on page 36.)
If
th
th
AA68-02859B-00Eng
6/21/05
2:22 PM
Page 21
Activating/Deactivating the Digital Noise Reduction Feature
ENG
If the signal received by your television is weak, you can activate
this feature to reduce any static and ghosting that may appear on
the screen.
1
Press the MENU button.
Result:
Picture
TV
œ Dynamic
√
: Off
Mode
Adjust
Digital NR
The options available in the Picture group are
displayed.
2
Press the ¦ or ‹ button.
3
Press the ▼ or ▲ button to select Digital NR.
4
To activate this feature, select On by pressing the ¦ or ‹ button.
Move
œ √ Adjust
21
Exit
√
AA68-02859B-00Eng
6/21/05
2:22 PM
Page 22
Setting the Blue Screen
ENG
TV
If no signal is being received or the signal is very weak, a blue
screen automatically replaces the noisy picture background.
Setup
Plug & Play
Language
Blue Screen
Demonstration
Tilt
√
√
: On
√
: 0
If you wish to continue viewing the poor picture, you must set the
“Blue Screen” mode to “Off”.
1
Press the MENU (
Result:
Move
œ √ Adjust
Exit
2
Y
v
D
) button.
The main menu is displayed.
Press the ▼ or ▲ button to select Setup.
Result:
The options available in the Setup group are
displayed.
3
Press the œ or √ button.
4
Press the ▼ or ▲ button to select Blue Screen.
5
To activate this feature, select On by pressing the œ or √ button.
Y
si
Using the Tilt Control Feature
TV
If you find that the picture received is slightly tilted to one side, you
can adjust the tilt setting.
Setup
Plug & Play
Language
Blue Screen
Demonstration
Tilt
Move
œ √ Adjust
22
√
√
: On
√
: 0
1
Press the MENU (
Result:
2
The main menu is displayed.
Press the ▼ or ▲ button to select Setup.
Result:
Exit
) button.
The options available in the Setup group are
displayed.
3
Press the œ or √ button.
4
Press the ▼ or ▲ button to select Tilt.
5
Press the œ or √ button to reach the required setting (-7 to +7).
Y
w
AA68-02859B-00Eng
6/21/05
2:22 PM
Page 23
Selecting the Picture Size
ENG
You can select the picture size which best corresponds to your
viewing requirements simply by pressing the “P.SIZE ( )” button.
Depending on the model, the following picture sizes are available:
◆ Normal, Zoom1, Zoom2, 16:9
◆ 16:9, Panorama, Zoom1, Zoom2, 4:3, Auto Wide
Freezing the Current Picture
You can freeze the picture when watching a television programme
simply by pressing the “STILL ( )” button.
➣
To return to normal viewing, press this button again.
Changing the Sound Standard
u
You can select the type of special sound effect to be used when
watching a given broadcast.
1
Press the MENU (
Result:
2
The options available in the Sound group are
displayed.
Sound
œ Standard
√
Mode
√
Equalizer
Auto volume
: Off
Melody
: On
√
Sound effect
Move
œ √ Adjust
Press the œ or √ button.
Result:
4
The main menu is displayed.
Press the ▼ or ▲ button to select Sound.
Result:
3
) button.
TV
The Mode is selected.
Select the required sound effect by pressing the œ or √ button
repeatedly.
Result:
The following sound effects are available:
Standard - Music - Movie - Speech(SVE) - Custom.
◆ SVE : SAMSUNG Voice Enhancement Technic
➣
You can also set these options simply by pressing the
S.MODE(
) (Sound Mode) button.
23
Exit
AA68-02859B-00Eng
6/21/05
2:22 PM
Page 24
Adjusting the Sound Settings
ENG
The sound settings can be adjusted to suit your personal preferences.
TV
Sound
œ Standard
√
Mode
√
Equalizer
Auto volume
: Off
Melody
: On
√
Sound effect
1
Press the MENU (
Result:
2
œ √ Enter
TV
Exit
Equalizer
R
Press the œ or √ button.
4
Press the ▼ or ▲ button to select Equalizer.
5
Press the œ or √ button.
Result:
Adjust
œ √ Move
3K
The options available in the Equalizer group are
displayed.
can also display this group simply by pressing the
➣ You
S.MENU (Sound Menu) button.
10K
Exit
6
Select the option to be adjusted by pressing the œ or √ button.
Press the ▼ or ▲ button to reach the required setting.
➣
24
The options available in the Sound. group are
displayed.
3
L
100 300 1K
The main menu is displayed.
Press the ▼ or ▲ button to select Sound.
Result:
Move
) button.
If you make any changes to these settings, the sound
standard is automatically switched to Custom.
AA68-02859B-00Eng
6/21/05
2:22 PM
Page 25
Extra Sound Settings
ENG
◆ Auto volume
.
Each broadcasting station has its own signal conditions, and
so it is not easy for you to adjust the volume every time the
channel is changed. This feature lets you automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is low.
TV
Sound
œ Standard
√
Mode
√
Equalizer
Auto volume
: Off
Melody
: On
√
Sound effect
◆ Melody
You can hear clear melody sound when the television is
powered on or off.
◆ Turbo sound
Move
TV
This feature suitably emphasizes both higher and lower
bands of sound (and includes other effects). You can enjoy
more magnificent and dynamic sound when watching
music, movie, or other channels.
Pseudo stereo feature converts a monaural sound signal
into two identical left and right channels.
1
Sound
Move
TV
œ √ Adjust
Exit
Sound effect
Turbo sound
Pseudo stereo
Virtual surround
: Off
: Off
: Off
Press the MENU button.
Result:
2
Exit
œ Standard
√
Mode
√
Equalizer
Auto volume
: Off
Melody
: On
√
Sound effect
◆ Pseudo stereo / Virtual surround
Once the Pseudo stereo or Virtual surround is set to
On or Off, these settings apply to the sound effects such as
Standard, Music, Movie, and Speech(SVE).
œ √ Adjust
The main menu is displayed.
Move
Press the ▼ or ▲ button to select Sound.
Result:
The options available in the Sound group are
displayed.
3
Press the ¦or ‹ button.
4
Select the required option (Auto volume, Melody, Turbo sound,
Pseudo stereo or Virtual surround) by pressing the ▼ or ▲
button.
TV
œ √ Adjust
Sound effect
Turbo sound
Pseudo stereo
Virtual surround
select Turbo sound, Pseudo stereo and Virtual
➣ To
surround, select Sound effect by pressing the ▼ or ▲
Exit
Move
œ √ Adjust
: Off
: Off
: Off
Exit
button and press the ¦or ‹ button.
can select the turbo sound feature simply by pressing
➣ You
the TURBO button.
5
To activate each feature, select On by pressing the ¦or ‹
button.
➣
Manufactured under license from
Dolby Laboratories.
“Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.
TV
Sound effect
Turbo sound
Pseudo stereo
Virtual surround
Move
œ √ Adjust
25
: Off
: Off
: Off
Exit
AA68-02859B-00Eng
6/21/05
2:22 PM
Page 26
Selecting the Sound Mode (depending on the model)
ENG
The “DUAL I-II” button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either “Dual-I ” or “Stereo”, depending on
the current transmission.
Regular broadcast
(Standard audio)
MONO (Normal use)
Regular +
NICAM Mono
MONO ↔ MONO
NICAM
(Normal)
NICAM Stereo
STEREO ↔ MONO
NICAM
(Normal)
NICAM Dual-I/II
DUAL-I →DUAL-II→ Mono
NICAM NICAM (Normal)
A2
Stereo
Regular broadcast
(Standard audio)
MONO (Normal use)
Bilingual or Dual-I/II
DUAL-I ↔ DUAL-II
Stereo
➣
→
On-screen indication
→
NICAM
Stereo
Type of broadcast
STEREO ↔ MONO
(Forced mono)
◆ If the receiving conditions deteriorate, listening will be
easier if the mode is set to the MONO.
◆ If the stereo signal is weak and an automatic switching
occurs, then switch to the MONO.
◆ When receiving a mono sound in the AV mode, connect
to the “AUDIO-L” input connector on the panel (front or
side). If the mono sound comes out only from left
speaker, press the DUAL I-II button.
26
Y
th
th
AA68-02859B-00Eng
6/21/05
2:22 PM
Page 27
Setting the Sleep Timer
ENG
You can select a time period of between 30 and 180 minutes after
the television automatically switches to Standby mode by pressing
the “SLEEP ( )” button.
1
Press the SLEEP (
Result:
2
If the sleep timer is not yet set, Off is displayed.
If the sleep timer is already set, the screen displays
the remaining time and then before the television will
be placed in standby mode.
Press the SLEEP ( ) button repeatedly and cycle through the
preset time intervals (30, 60, 90, 120, 150, 180, Off).
Result:
3
) button on the remote control.
The television automatically switches to standby mode
when the timer reaches 0.
To cancel the sleep timer feature, press the SLEEP (
repeatedly and select Off.
) button
27
AA68-02859B-00Eng
6/21/05
2:22 PM
Page 28
Setting and Displaying the Current Time
ENG
You can set the television’s clock so that the current time is displayed
by pressing the “INFO ( )” button. You must also set the time if
you wish to use the automatic on or off timers.
Time
TV
Clock
Timer
: -- : -: Off
➣
1
Move
œ √ Enter
Exit
2
Clock
Timer
Press the MENU (
Result:
Time
TV
When pressing the “ ” button (On/Off) on the front of
the television, the clock setting will be reset.
3
œ √ Adjust
Clock
Timer
The Clock is selected.
4
Press the œ or √ button to move to the hour or minute. Set the
hour or minute by pressing the ▼ or ▲ button.
5
When you have finished, press the TV (
6
To...
Exit
Time
TV
The options available in the Time group are displayed.
Press the œ or √ button.
Result:
Move
The main menu is displayed.
Press the ▼ or ▲ button to select Time.
Result:
: -- : -: Off
: 11 : 00
: Off
œ √ Move
28
Exit
) button to exit.
Press the “INFO (
display the channel information
Once.
display the current time
Twice.
remove the display
Adjust
) button.
)” button...
Three times.
Y
AA68-02859B-00Eng
6/21/05
2:22 PM
Page 29
Switching the Television On and Off Automatically
ENG
d
You can set the On/Off timers so that the television will:
◆ Switch on automatically and tune to the channel of your
choice at the time you select
Clock
Timer
◆ Switch off automatically at the time you select
➣
.
..
1
The first step is to set the television’s clock (refer to
“Setting and Displaying the Current Time” on the
previous page). If you have not yet set the clock,
the message Set the clock first is displayed.
Press the MENU (
Result:
2
) button.
Move
The main menu is displayed.
Press the œ or √ button.
4
Press the ▼ or ▲ button to select Timer.
5
Press the œ or √ button to set On
6
:
:
:
:
Exit
Time
Clock
Timer
On time
Off time
Press the ▼ or ▲ button to select On Time. Set the time at which
you wish the television to be switched on automatically.
11 : 32
On
-- : --- : --
œ √ Adjust
TV
The On Time and Off Time are displayed.
Exit
Time
Move
Result:
œ √ Adjust
Clock
Timer
On time
Off time
The options available in the Time group are displayed.
3
: 11 : 32
: Off
TV
Press the ▼ or ▲ button to select Time.
Result:
Time
TV
:
:
:
:
11 : 32
On
06 : 00
-- : --
◆ Press the œ or √ button to move to the hour or minute.
Set these by pressing the ▼ or ▲ button.
Adjust
7
Press the ▼ or ▲ button to select Off Time. In the same above,
set the time at which you wish the television to be switched off
automatically.
œ √ Move
Exit
Time
TV
Clock
Timer
On time
Off time
Adjust
:
:
:
:
11 : 32
On
06 : 00
23 : 00
œ √ Move
29
Exit
AA68-02859B-00Eng
6/21/05
2:23 PM
Page 30
Teletext Feature
ENG
Most television channels provide written information services via
teletext. Information provided includes:
Y
b
◆ Television programme times
◆ News bulletins and weather forecasts
◆ Sports results
◆ Travel information
This information is divided into numbered pages (see diagram).
Part
Contents
A
Selected page number.
B
Broadcasting channel identity.
C
Current page number or search indications.
D
Date and time.
E
Text.
F
Status information.
FASTEXT information.
➣
➣
U
It can be diffrent from depending on TTX source.
Teletext information is often divided between several
pages displayed in sequence, which can be accessed by:
◆ Entering the page number
◆ Selecting a title in a list
◆ Selecting a coloured heading (FASTEXT system)
Displaying the Teletext Information
You can display Teletext information at any time on your television.
Teletext information to be displayed correctly,
☛ For
channel reception must be stable; otherwise:
◆ Information may be missing
◆ Some pages may not be displayed
30
1
Select the channel providing the Teletext service using the
button.
2
Press the TTX/MIX (
) button to activate the teletext mode.
The contents page is displayed. It can be redisplayed
Result:
at any time by pressing the
(index) button.
3
If you wish to display the actual broadcast at the same time as
the teletext page, press the TTX/MIX (
) button again.
4
Press the TV (
) button to exit from the teletext display.
or
AA68-02859B-00Eng
6/21/05
2:23 PM
Page 31
Selecting a Page by Number
ENG
You can enter the page number directly by pressing the numeric
buttons on the remote control.
1
Enter the three-digit page number given in the content by pressing
the corresponding numeric buttons.
Result:
2
The current page counter is incremented and the
page is then displayed.
If the selected page is linked with several secondary pages, the
secondary pages are displayed in sequence. To freeze the display
on a given page, press the
(hold). Press the
(hold) again to
resume.
Using the various display options:
To display...
Press the...
◆ Both teletext information and
the normal broadcast
TTX/MIX (
twice
)
◆ Hidden text
(answers to quiz games, for example)
(reveal)
◆ The normal screen
(reveal) again
◆ A secondary page,
by entering its 4-digit number
(sub-page)
◆ The next page
(page up)
◆ The previous page
(page down)
◆ Double-size letters in the:
• Upper half of the screen
• Lower half of the screen
(size)
• Once
• Twice
◆ Normal screen
• Three times
n.
31
AA68-02859B-00Eng
6/21/05
2:23 PM
Page 32
Using FLOF to Select a Page
ENG
The various topics included in the teletext pages are color-coded,
and can be selected by pressing the colored buttons on the remote
control.
1
Display the teletext contents page by pressing the TTX/MIX
(
) button.
2
Press the coloured button corresponding to the topic that you
wish to select;the available topics are given on the status line.
Result:
The page is displayed with other coloured information
that can be selected in the same way.
3
To display the previous or next page, press the corresponding
coloured button.
4
To display the subpage, see the following steps.
◆ Press the
(sub-page) button.
Result:
The available subpages appear.
◆ Select the required sub-page. Sub-pages can be scrolled by
using the TURBO (Red) or S.MENU (Green) button.
Storing Teletext Pages
You can store up to four teletext pages to display them later at
leisure.
1
Select the LIST mode using the
Result:
➣
32
button.
Four 3-digit numbers are displayed in different
colours.
The
button is used to switch between the LIST and
FLOF modes.
2
Press the coloured button corresponding to the page that will be
replaced.
3
Enter the new page number using the numeric buttons.
4
Repeat steps 2 and 3 for each page to be stored, using a
different coloured button each time.
5
Press the
(store) button until the corresponding blocks blink.
AA68-02859B-00Eng
6/21/05
2:23 PM
Page 33
Connecting to the External Input/Outputs
ENG
➢
1 ” is used for the equipment with an RGB output,
“
such as video game devices or video disc players.
VCR
②
①
Rear of the TV
DVD
③
Decoder /
Video game device
or
Video disc player
① This end can be fitted with:
◆ A SCART connector
◆ Three RCA connectors (Video + Audio-L and R)
Satellite receiver
② If you have a second VCR and wish to copy cassettes tape, connect the
1 ” and the target VCR to “
source VCR to “
1 ” to “
2 ”.
redirect the signal from “
2 ” so that you can
➃
③ If you have a decoder, connect the decoder to the VCR and the VCR to the
television.
➃ When you wish to record a programme, connect the receiver to “
and the VCR to “
2 ”.
“
2 ” so that you can redirect the signal from “
1”
1 ” to
Connecting to the Audio Output
➢
The “MONITOR AUDIO OUT” (RCA) connectors are used for equipment, such as an audio system
(to take full advantage of the Surround sound effect).
Rear of the TV
Audio system
33
AA68-02859B-00Eng
6/21/05
2:23 PM
Page 34
Connecting to the RCA Input
ENG
➢
The RCA (VIDEO and AUDIO-L+R) connectors are used for equipment,
such as camcorders, video disc players, and some video game devices.
Camcorder
Y
to
p
Side of the TV
Video game device
Video disc player
Connecting to the S-Video Input
➢
The S-VIDEO and RCA (AUDIO-L+R) connectors are used for equipment with an S-Video output,
such as a camcorder or VCR.
Side of the TV
①
and
Camcorder
VCR
① To play pictures and sound, both the S-VIDEO and RCA connectors must be used.
➣
☛
34
When both the side AV and rear connectors are connected to
external equipments, the side AV receives priority.
Whenever you connect an audio or video system to your
television, ensure that all elements are switched off.
Refer to the documentation supplied with your equipment
for detailed connection instructions and associated safety
precautions.
O
sy
ap
AA68-02859B-00Eng
6/21/05
2:23 PM
Page 35
Connecting Headphones
ENG
You can connect a set of headphones to your television if you wish
to watch a television programme without disturbing the other
people in the room.
1
Plug a set of headphones into the 3.5 mm mini-jack socket of the
television.
Result:
2
Side of the TV
The sound is heard through the headphones.
When you wish to hear the sound through the speakers again,
simply disconnect the headphones.
➣
Prolonged use of headphones at a high volume may
damage your hearing.
Viewing Pictures From External Sources
Once you have connected up your various audio and video
systems, you can view different sources by selecting the
appropriate input.
1
Check that all the necessary connections have been made.
2
Switch your television on, then press the VIDEO (
repeatedly.
Result:
➣
➣
) button
The input sources are displayed in the following
order:
AV1 - AV2 - S-Video (Option)
Depending on the source selected, the pictures may appear
automatically.
To watch television programmes again, press the TV (
button and select the number of the channel required.
)
o
35
AA68-02859B-00Eng
6/21/05
2:23 PM
Page 36
Automatic Degaussing to Remove Colour Patches
ENG
A degaussing coil is mounted around the picture tube, so you do not normally need to degauss the
television manually.
If you move the television to a different position and color patches appear on the screen, you must:
◆ Switch the television off by pressing the “
” (On/Off) button on the front panel
◆ Unplug the television from the wall socket
◆ Leave the television power-off for about 30 minutes so that the automatic degauss function
can be activated, and then press the “POWER( )” button on the remote control.
☛
If your television will be left unattended, press the “
television off.
” (On/Off) button to turn your
IM
T
in
m
N
it
If
po
H
D
IM
T
A
fo
T
T
Troubleshooting: Before Contacting Service Personnel
Before contacting Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of the
television and contact your local dealer.
No sound or picture
◆ Check that the mains lead has been connected to a wall socket.
◆ Check that you have pressed the “ ” button (On/Off) and the
POWER ( ) button.
◆ Check the picture contrast and brightness settings.
◆ Check the volume.
Normal picture but no sound
◆ Check the volume.
◆ Check whether the MUTE (
been pressed.
) button on the remote control has
No picture or black and white picture
◆ Adjust the colour settings.
◆ Check that the broadcast system selected is correct.
Sound and picture interference
◆ Try to identify the electrical appliance that is affecting the television,
then move it further away.
◆ Plug your television into a different mains socket.
Blurred or snowy picture,
distorted sound
◆ Check the direction, location and connections of your aerial.
This interference often occurs due to the use of an indoor aerial.
Remote control malfunctions
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control (transmission window).
◆ Check the battery terminals.
36
W
AA68-02859B-00Eng
6/21/05
2:23 PM
Page 37
Wiring the Mains Power Supply Plug (UK Only)
ENG
IMPORTANT NOTICE
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is
indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating
must be used.
Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required,
it must be of the same colour as the pin face of the plug. Replacement covers are available from your dealer.
If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power
point, you should obtain a suitable safety approved extension lead or consult your dealer for assistance.
However, if there is no alternative to cut off the plug, remove the fuse and then safely dispose of the plug.
Do NOT connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
BLUE - NEUTRAL
BROWN - LIVE
As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as
follows:
The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK.
The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.
WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH IS MARKED WITH THE
LETTER E OR BY THE EARTH SYMBOL , OR COLOURED GREEN OR GREEN AND YELLOW.
,
37
AA68-02859B-00Eng
6/21/05
2:23 PM
MEMO
ENG
38
Page 38
AA68-02859B-00Eng
6/21/05
2:23 PM
Page 39
MEMO
ENG
39
AA68-02859B-00Eng
6/21/05
2:23 PM
Page 40
- AFTER SALES SERVICE
- Do not hesitate to contact your retailer or service agent
if a change in the performance of your product
indicates that a faulty condition may be present.
ELECTRONICS
EUROPEAN NOTICE
Products with the CE marking comply with the EMC
Directive (89/336/EEC), (92/31/EEC), (93/68/EEC) and the
Low Voltage Directive (73/23/EEC) issued by the
Commission of the European Community. Compliance
with these directives implies conformity to the following
European Norms:
■
EN55013:1990+A12:1994+A13:1996+A14:1999
Radio Frequency Interference
■
EN55020:1994+A11:1996+A12/A13/A14:1999
Electromagnetic Immunity
■
EN61000-3-2:1995+A1/A2:1998
Power Line Harmonics
■
EN61000-3-3:1995
Voltage Fluctuations
■
EN60065:1998
Product Safety
AA68-02859B-00
Download PDF

advertising