Samsung CL-21N11MJ Manual de Usuario

Add to my manuals
38 Pages

advertisement

Samsung CL-21N11MJ Manual de Usuario | Manualzz
CL21M16MJ
CL21N11MJ
COLOR TELEVISION
Owner’s
Instructions
CONTENTS
Chapter 1: Your New TV. . . . . . . . . . . . . . . . . 4
List of Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Familiarizing Yourself with The TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Front Panel Buttons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Side Panel Jacks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Rear Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Chapter 2: Installation . . . . . . . . . . . . . . . . . . 9
Connecting VHF and UHF Antennas. . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Antennas with 300-ohm Flat Twin Leads. . . . . . . . . . . . . . . . . 9
Antennas with 75-ohm Round Leads . . . . . . . . . . . . . . . . . . 10
Separate VHF and UHF Antennas . . . . . . . . . . . . . . . . . . . . . 10
Connecting Cable TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Cable without a Cable Box . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connecting to a Cable Box that Descrambles
All Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Connecting to a Cable Box that Descrambles
Some Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Connecting a VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Connecting a Camcorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Installing Batteries in the Remote Control . . . . . . . . . . . . . . . . . . . . . . 15
Chapter 3: Operation . . . . . . . . . . . . . . . . . . 16
Turning the TV On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Viewing the Menus and On-Screen Displays . . . . . . . . . . . . . . . . . . . . 16
Viewing the Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Viewing the Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Selecting a Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Memorizing the Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Selecting the Video Signal-source . . . . . . . . . . . . . . . . . . . . . 18
Storing Channels in Memory (Automatic Method) . . . . . . . . 19
Adding and Erasing Channels (Manual Method) . . . . . . . . . . 20
Changing Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Using the Channel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Directly Accessing Channels . . . . . . . . . . . . . . . . . . . . . . . . . 21
Using the PRE-CH Button to select the Previous Channel . . . 21
Channel Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Customizing the Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Using Automatic Picture Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Using Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Viewing a VCR or Camcorder Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
2
CONTENTS
Chapter 4: Special Features . . . . . . . . . . . . . 27
Fine Tuning Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Selecting the Color Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Changing the Screen Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Using the Surf Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Extra Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Setting the On/Off Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Setting the Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Viewing Closed Captions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Chapter 5: Troubleshooting . . . . . . . . . . . . . 35
Identifying Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Cleaning and Maintaining Your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Using Your TV in Another Country . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
3
Chapter One
YOUR NEW TV
List of Features
Your TV was designed with the latest technology. This TV is a high-performance unit that
includes the following special features:
• Easy-to-use remote control
• Easy-to-use on-screen menu system
• Automatic timer to turn the TV on and off
• Adjustable picture settings that can be stored in the TV’s memory
• Automatic channel tuning for up to 181 channels
• A special filter to reduce or eliminate reception problems
• Fine tuning control for the sharpest picture possible
• A special sleep timer
4
YOUR NEW TV
Familiarizing Yourself with The TV
Front Panel Buttons
The buttons on the front panel control your TV’s basic features, including the on-screen
menu. To use the more advanced features, you must use the remote control.
CL21M16MJ
CL21N11MJ
˛ MENU
Press to see an on-screen menu of your TV's features.
« VOL – , +
Press to increase or decrease the volume.
Also used to select items on the on-screen menu.
‹ Remote Control Sensor
Aim the remote control towards this spot on the
TV.
STAND BY indicator
Lights up when you turn the power off.
fl POWER
CH
and CH
Press to turn the TV on and off.
Press to change channels. Also press to select
various items on the on-screen menu.
5
YOUR NEW TV
Side Panel Jacks
You can use the Side panel jacks to connect an A/V component that is used only occasionally, such as a camcorder or video game. (For information on connecting equipment,
see page 14.)
CL21M16MJ
CL21N11MJ
˛ AUDIO INPUT
Audio signal from VCRs, DVD players and similar
devices.
« VIDEO INPUT
Video signal from VCRs, DVD players and similar
devices.
6
HEADPHONE
Connect a set of external headphones to this jack
for private listening.
YOUR NEW TV
Rear Panel Jacks
Use the rear panel jacks to connect an A/V component that will be connected
continuously, such as a VCR or a DVD player.
For more information on connecting equipment, see pages 9-14.
˛ VIDEO INPUT
Video signal from VCRs, DVD players and similar
devices.
VHF/UHF
Connect to an antenna or to a cable TV system.
« AUDIO INPUT
Audio signal from VCRs, DVD players and similar
devices.
7
YOUR NEW TV
Remote Control
You can use the remote control up to about 23 feet from the TV. When using the remote,
always point it directly at the TV.
˛ POWER
PRE-CH
Turns the TV on and off.
« Number buttons
Press to select channels directly
on the TV.
Tunes to the previous channel.
TV/VIDEO
Press to display all of the available
video sources (i.e., Antenna/Cable,
VCR).
+100
Press to select channels over 100.
For example, to select
channel 121, press “+100,” then
press “2” and “1.”
‹ MUTE
+
Press to increase or decrease the
volume.
fl SLEEP
Press to select a preset time interval for automatic shutoff.
‚ MENU
Displays the main on-screen
menu.
R-SURF
Press the SURF button to automatically return to a preferred channel after a user-preset time delay.
CH.SCAN
Press to have the TV automatically
scan all of the channels it has
memorized.
8
Press CH
channels.
or CH
to change
æ INFO
Press to temporarily cut off
the sound.
VOL -, VOL
CH
and CH
(Channel Up/Down)
Press to see the time, channel,
etc., on-screen. Also press to exit
(quit) the menu system.
EXIT
Press to exit the menu.
fi Up, Down, Left,
Right (▲, ▼, ˇ , ˆ )/
ENTER
Press to select highlight up, down,
left, or right. While using the onscreen menus, press the ENTER
button to activate (or change) a
particular item.
C h a p t e r Tw o
I N S TA L L AT I O N
Connecting VHF and UHF Antennas
If your antenna has a set of leads that
look like this, see “Antennas with
300-ohm Flat Twin Leads” below.
If your antenna has one lead that looks
like this, see “Antennas with 75-ohm
Round Leads” on next page.
If you have two antennas, see “Separate
VHF and UHF Antennas” on next page.
Antennas with 300-ohm Flat Twin Leads
If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has
300-ohm twin flat leads, follow the directions below.
1
Place the wires from the
twin leads under the
screws on the 300-75 ohm
adaptor (not supplied).
Use a screwdriver to
tighten the screws.
2
Plug the adaptor into the
VHF/UHF terminal on the
bottom of the back panel.
9
I N S TA L L AT I O N
Antennas with 75-ohm Round Leads
1
Plug the antenna lead into
the VHF/UHF
terminal on the bottom of
the back panel.
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must
combine the two antenna signals before connecting the antennas to the TV. This
procedure requires an optional combiner-adaptor (available at most electronics shops).
1
Connect both antenna
leads to the combiner.
2
Plug the combiner into the
VHF/UHF terminal on the
bottom of the rear panel.
Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box
Plug the incoming cable
into the VHF/UHF antenna
terminal on back of the TV.
10
Because this TV is cable-ready,
you do not need a cable box to view
unscrambled cable channels.
▼
1
I N S TA L L AT I O N
Connecting to a Cable Box that Descrambles All Channels
▼
This terminal might be labeled
“ANT OUT”, “VHF OUT” or simply,
“OUT”.
1
Find the cable that is connected to the ANTENNA
OUT terminal on your
cable box.
2
Connect the other end of
this cable to the VHF/UHF
antenna terminal on the
back of the TV.
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the
instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of
coaxial cable. (These items are available at most electronics stores.)
▼
This terminal might be labeled
“ANT IN”, “VHF IN” or simply,
“IN”.
1
Find and disconnect the
cable that is connected to
the ANTENNA IN
terminal on your cable
box.
2
Connect this cable to a
two-way splitter.
Incoming Cable
Splitter
3
Connect a coaxial cable
between an OUTPUT terminal on the splitter and
the IN terminal on the
cable box.
Incoming Cable
Splitter
Cable Box
11
I N S TA L L AT I O N
4
Connect a coaxial cable
between the ANTENNA
OUT terminal on the cable
box and the B–IN terminal
on the RF(A/B) switch.
Incoming
Cable
Splitter
RF (A/B)
Switch
Cable Box
5
Connect another cable
between the other OUT
terminal on the splitter
and the A–IN terminal on
the RF (A/B) switch.
Incoming
Cable
Splitter
Cable Box
RF (A/B)
Switch
6
Connect the last coaxial
cable between the OUT
terminal on the RF (A/B)
switch and the VHF/UHF
terminal on the rear of the
TV.
Incoming
Cable
Splitter
Cable Box
RF (A/B)
Switch
TV Rear
After you’ve made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the
A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which is
usually channel 3 or 4.)
12
I N S TA L L AT I O N
Connecting a VCR
These instructions assume that you have already connected your TV to an antenna or a cable
TV system (according to the instructions on pages 9-12). Skip step 1 if you have not yet
connected to an antenna or a cable system.
1
Unplug the cable or
antenna from the back of
the TV.
2
Connect the cable or
antenna to the
ANTENNA IN terminal on
the back of the VCR.
3
VCR Rear Panel
Incoming
Cable or
Antenna
VCR Rear Panel
Connect a coaxial cable
between the ANTENNA
OUT terminal on the VCR
and the antenna
terminal on the TV.
TV Rear Panel
Coaxial Cable
A coaxial cable is usually included with a VCR. (If not, check your local electronics
store).
4
TV Rear Panel
VCR Rear Panel
Connect an audio cable
between the AUDIO OUT
jack on the VCR and the
AUDIO jack on the TV.
Audio Cable
5
Connect a video cable
between the VIDEO OUT
jack on the VCR and the
VIDEO jack on the TV.
TV Rear Panel
VCR Rear Panel
Video Cable
Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.
13
I N S TA L L AT I O N
Connecting a Camcorder
The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow
you to view the camcorder tapes without using a VCR. (Also see “Viewing a VCR or
Camcorder Tape” on page 26.)
1
Locate the A/V output
jacks on the camcorder.
They are usually found on
the side or back of the
camcorder.
2
Camcorder
Output Jacks
Camcorder
Output Jacks
Connect an audio cable
between the AUDIO OUTPUT jack on the camcorder and the AUDIO
terminals on the side of
the TV.
3
Connect a video cable
between the VIDEO OUTPUT jack on the camcorder and the VIDEO terminal on the side of the
TV.
TV Side Panel
Audio Cable
Camcorder
Output Jacks
TV Side Panel
Video Cable
The audio-video cables shown here are usually included with a Camcorder. (If not, check
your local electronics store.) If your camcorder is stereo, you need to connect a set of two
cables.
Note: This figure shows the Standard connector-jack panel. The actual configuration for your TV
may be different.
14
I N S TA L L AT I O N
Installing Batteries in the Remote Control
1
Slide the cover out completely.
Install two AAA size
batteries.
Replace the cover.
Remove the batteries and store
them in a cool, dry place if you won’t
be using the remote control for a
long time.
▼
3
Make sure to match the “+” and
“–” ends of the batteries with the
diagram inside the compartment.
▼
2
The remote control can be used up
to about 23 feet from the TV.
(Assuming typical TV usage, the batteries last for about one year.)
15
C h a pOtP EeR AT
r I OTN h r e e
O P E R AT I O N
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the front panel.
Viewing the Menus and On-Screen Displays
Viewing the Menus
With the power on, press
the MENU button.
The main menu appears
on the screen. Its left side
has four icons: Picture,
Sound, Channel and
Function.
The on-screen menus disappear
from the screen after about two minutes.
▼
1
Picture
Mode
Adjust
Color Tone
Size
Move
ˇ Dynamic
ˆ
ˆ
: Cool
: Normal
Select
Exit
You can also use the MENU,
CHANNEL and VOLUME buttons
on the control panel of the TV to
make selections.
▼
2
Use the ▲ and ▼ buttons to highlight one of the 4 icons.
Then press the ˆ button to access the icon’s sub-menu.
Press the EXIT button to exit.
Viewing the Display
Press the INFO button.
on the remote control.
The on-screen display
shows any or all of the
following: Active channel,
picture mode, and the
time.
(“*” indicates a channel
has been manually fine
tuned.)
16
The on-screen displays
disappear after about ten seconds.
▼
1
ANT
11*
Picture
- - : - - am
: Dynamic
When Closed Caption has been set,
the icon(
) will appear by pressing the INFO button.
O P E R AT I O N
Selecting a Menu Language
1
Press the MENU button to
display the menu.
Press the ▲ or ▼ button
to select “Function”, then
press the ˇ or ˆ button.
Function
Language
Time
Caption
Move
ˇ English
Select
2
Press the ˇ or ˆ button
to select the appropriate
language: English,
Spanish or French.
Press the EXIT button to
exit.
ˆ
ˆ
ˆ
Exit
Function
Language
Time
Caption
Move
ˇ English
Select
ˆ
ˆ
ˆ
Exit
17
O P E R AT I O N
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (antenna)
and cable channels. After the available channels are memorized, use the CH
and
CH
buttons to scan through the channels. This eliminates the need to change
channels by entering the channel digits. There are three steps for memorizing channels:
selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the
type of signal source that is connected to the TV (i.e., an antenna or a cable system).
1
Press the MENU button to
display the menu.
Press the ▲ or ▼ button
to select “Channel”, then
press the ˇ or ˆ button.
Channel
ˇ
ANT/CATV
Auto Program
ˇ
TV/AV
Fine Tune
Add/Erase
Move
Press the EXIT button to
exit.
TV
Select
2
Repeatedly press the ˇ or
ˆ button to cycle through
these choices:
ANT (antenna), STD, HRC
or IRC (all cable TV).
ANT
ˆ
ˆ
ˆ
ˆ
ˆ
Exit
Channel
ˇ
ANT/CATV
Auto Program
ˇ
TV/AV
Fine Tune
Add/Erase
Move
Select
ANT
TV
ˆ
ˆ
ˆ
ˆ
ˆ
Exit
Note: STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area.
At this point the signal source has been selected. Proceed to “Storing Channels in Memory” (next
page).
18
O P E R AT I O N
Storing Channels in Memory (Automatic Method)
1
First, select the correct
signal source (ANT, STD,
HRC, IRC). See steps 1~2 on
previous page.
Press the MENU button,
then press the ▲ or ▼
button to select “Channel”
then press the ˇ or ˆ button.
Channel
ˇ
ANT/CATV
Auto Program
ˇ
TV/AV
Fine Tune
Add/Erase
Move
TV
Select
2
Press the ▲ or ▼ button
to select “Auto program”.
ANT
ˆ
ˆ
ˆ
ˆ
ˆ
Exit
Channel
ˇ
ANT/CATV
Auto Program
ˇ
TV/AV
Fine Tune
Add/Erase
Move
Select
ANT
TV
ˆ
ˆ
ˆ
ˆ
ˆ
Exit
The TV automatically cycles
through all of the available channels
and stores them in memory. This
takes about one to two minutes.
Press the MENU button at any time
to interrupt the memorization
process and return to the Channel
menu.
▼
3
Press the ˇ or ˆ button.
The TV will begin
memorizing all of the
available channels.
Auto Program
ANT 30
Exit
4
After all the available channels are stored, the Channel menu
reappears. Press the EXIT button to exit.
19
O P E R AT I O N
Adding and Erasing Channels (Manual Method)
1
Press the MENU button to
display the menu.
Press the ▲ or ▼ button
to select “Channel”, then
press the ˇ or ˆ button.
Channel
ˇ
ANT/CATV
Auto Program
ˇ
TV/AV
Fine Tune
Add/Erase
Move
Select
2
Press the ▲ or ▼ button
to select “Add/Erase”,
then press the ˇ or ˆ
button.
Select
: ANT 12
: Erased
Select
4
Press the EXIT button to
exit.
20
Exit
Channel
Channel
Select
Move
Press the ˇ or ˆ button
to select “Added” or
“Erased”.
Exit
: ANT 11
: Erased
3
Press the ▲ or ▼ button
to select “Select”.
TV
Channel
Channel
Select
Move
Press the ˇ , ˆ or number
buttons to select the
channel you want added
or erased.
ANT
Exit
Channel
Channel
Select
Move
: ANT 12
: Added
Select
Exit
ˆ
ˆ
ˆ
ˆ
ˆ
O P E R AT I O N
Changing Channels
Using the Channel Buttons
Press the CH
or CH
button to change channels.
When you press CH
or CH , the TV changes channels in sequence. You will see all the
channels that the TV has memorized. (The TV must have memorized at least three channels.)
You will not see channels that were either erased or not memorized.
Directly Accessing Channels
Use the number buttons to quickly tune to any channel.
Press the number buttons to go directly to a channel.
For example, to select channel 27, press “2”, then “7”.
The TV will change channels when you press the
second number.
When you use the number buttons, you can directly select channels that were either erased or
not memorized.
To select a channel over 100, press the +100 button. (For channel 122, press “+100”, then “2”,
then “2”.)
To change to single-digit channels (0–9) faster, press “0” before the
single digit. (For channel “4”, press “0”, then “4”.)
Using the PRE-CH Button to select the Previous Channel
To quickly switch between two
channels that are far apart, tune to
one channel, then use the number
button to select the second channel.
Then, use the PRE-CH button to
quickly alternate between them.
▼
Press the PRE-CH button.
The TV will switch to the last channel viewed.
Channel Scan
Press the CH.SCAN button.
The TV automatically scan all of the channels it has memorized.
21
O P E R AT I O N
Customizing the Picture
You can use the on-screen menus to change the contrast, brightness, sharpness, color,
and tint according to personal preference. (Alternatively, you can use one of the
“automatic” settings. See next page.)
1
Press the MENU button to
display menu.
Picture
Mode
Adjust
Color Tone
Size
ˇ Dynamic
ˆ
ˆ
: Cool
: Normal
Press the ˇ or ˆ button to
select “Picture”.
Move
Select
2
Press the ▲ or ▼ button
to select “Adjust”, then
press the ˇ or ˆ button.
(The words Contrast,
Brightness, Sharpness,
Color and Tint will appear
on the screen.)
Exit
Picture
Adjust
Contrast
Brightness
Sharpness
Color
Tint
Move
Select
100
50
70
50
G 50 R 50
Exit
▼
After adjusting an item, the gauge
will automatically disappear (after
about 5 seconds).
3
Press the ▲ or ▼ button to
select a particular item,
then press the ˇ or ˆ button to increase or
decrease the value of a
particular item.
Press the EXIT button to
exit.
22
Contrast
100
O P E R AT I O N
Using Automatic Picture Settings
Your TV has three automatic picture settings (“Dynamic”, “Standard” and “Movie”) that
are preset at the factory. You can activate either Dynamic, Standard or Movie by making
a selection from the menu. Or, you can select “Custom” which automatically recalls your
personalized picture settings.
1
Picture
Press the MENU button to
display menu.
Mode
Adjust
Color Tone
Size
ˇ Dynamic
ˆ
ˆ
: Cool
: Normal
Press the ˇ or ˆ button to
select “Picture”.
Move
Select
2
Press the ˇ or ˆ button
to select the “Dynamic”,
“Standard”, “Movie” or
“Custom” picture setting.
Press the EXIT button to
exit.
•
•
•
•
Exit
Picture
Mode
Adjust
Color Tone
Size
Move
ˇ Dynamic
Select
ˆ
ˆ
: Cool
: Normal
Exit
Choose Dynamic for viewing the TV during the day or when there is
brightlight in the room.
Standard: Optimal indoor screen condition.
Choose Movie when viewing the TV in low light, or when
playing video games.
Choose Custom if you want to adjust the settings according to personal
preference (see “Customizing the Picture”, page 22).
23
O P E R AT I O N
Adjusting the Volume
Press the VOL + or VOL– button to increase or decrease the volume.
Using Mute
At any time, you can temporarily cut off the sound using the Mute button.
1
Press the MUTE button and the sound cuts off.
The word “Mute” will appear in the lower-left corner of the
screen.
2
To turn mute off, press the MUTE button again, or simply press
either the VOL – or VOL + button.
24
O P E R AT I O N
Setting the Clock
1
Press the MENU button to
display the on-screen
menu.
Press the ▲ or ▼ button
to select “Function”, then
press the ˇ or ˆ button.
Function
Language
Time
Caption
Move
ˇ English
Select
2
Press the ▲ or ▼ button
to select “Time”, then
press the ˇ or ˆ button.
The Time menu will
appear on the screen, and
“Clock” will be selected.
Function
Clock
- - : - - am
On time
Off time
- - : - - am Off
- - : - - am Off
Move
Select
Function
Time
Clock
10 : 00 am
On time
Off time
- - : - - am Off
- - : - - am Off
Move
Select
Press the ▲ or ▼ button
to select the correct minutes.
When selecting the hours, be sure
to select the proper time of day (AM
or PM).
Exit
You can change the hours by pressing
▲ or ▼ repeatedly (or by holding
down either of these buttons).
The time will appear every time
you press the INFO button.
▼
4
After the hour is entered,
press the ˆ button. to
select the minutes digits.
Exit
▼
Press the ▲ or ▼ button
repeatedly until the correct hour appears.
Exit
Time
3
Press the ˇ or ˆ button
to select the hours digits.
ˆ
ˆ
ˆ
Function
Time
Clock
10 : 30 am
On time
Off time
- - : - - am Off
- - : - - am Off
Move
Select
Exit
Press the EXIT button to
exit.
25
O P E R AT I O N
Viewing a VCR or Camcorder Tape
You must select the appropriate mode in order to view the VCR or
Camcorder signal on the TV.
1
Press the MENU button to
display the menu.
Press the ▲ or ▼ button
to select “Channel”, then
press the ˇ or ˆ button.
Channel
ˇ
ANT/CATV
Auto Program
ˇ
TV/AV
Fine Tune
Add/Erase
Move
Select
3
26
Exit
ANT
TV
ˆ
ˆ
ˆ
ˆ
ˆ
Exit
Channel
ˇ
ANT/CATV
Auto Program
ˇ
TV/AV
Fine Tune
Add/Erase
Move
Press the EXIT button to
exit.
Alternate method:
Simply press the
TV/VIDEO button on
the remote control to
select an External
Signal Source.
ˆ
ˆ
ˆ
ˆ
ˆ
Channel
ˇ
ANT/CATV
Auto Program
ˇ
TV/AV
Fine Tune
Add/Erase
Move
Press the ˇ or ˆ button .
You will switch between
viewing the signals coming from equipment connected to the TV’s A/V
jacks, and the TV signal.
TV
Select
2
Press the ▲ or ▼ button
to select the “TV/AV”.
ANT
AV1
Select
ANT
AV1
Exit
ˆ
ˆ
ˆ
ˆ
ˆ
Chapter Four
S P E C I A L F E AT U R E S
Fine Tuning Channels
Use fine tuning to manually adjust a particular channel for optimal reception.
1
Press the MENU button to
display the menu.
Press the ▲ or ▼ button
to select “Channel”, then
press the ˇ or ˆ button.
Channel
ˇ
ANT/CATV
Auto Program
ˇ
TV/AV
Fine Tune
Add/Erase
Move
Select
2
Press the ▲ or ▼ button
to select “Fine tune”, then
press the ˇ or ˆ button.
TV
ˆ
ˆ
ˆ
ˆ
ˆ
Exit
Channel
Fine Tune
Select
Move
:
0
: Erased
Select
3
Press the ˇ and ˆ buttons to adjust the fine tuning.
ANT
Exit
Channel
Fine Tune
Select
Move
: + 3
: Erased
Adjust
Exit
After you adjust the fine tuning,
“*” will appear when you press the
INFO button while watching this
channel.
▼
4
To store the fine tuning
setting in the TV’s memory, press the ▲ or ▼ button to select “Select”.
Press the ˇ or ˆ button
to select “Added”.
To reset the fine tuning to
“0”, press the ˇ or ˆ button to select “Erased”.
Channel
Fine Tune
Select
Move
: + 3
: Added
Select
Exit
Press the EXIT button to
exit.
27
S P E C I A L F E AT U R E S
Selecting the Color Tone
1
Press the MENU button to
display menu.
Picture
Mode
Adjust
Color Tone
Size
ˇ Dynamic
ˆ
ˆ
: Cool
: Normal
Press the ˇ or ˆ button to
select “Picture”.
Move
Select
2
Press the ▲ or ▼ button
to select "Color Tone".
Picture
Mode
Adjust
Color Tone
Size
Move
ˇ Dynamic
Press the EXIT button to
exit.
28
ˆ
ˆ
: Cool
: Normal
Select
3
Press the ˇ or ˆ button
repeatedly to select
“Cool”, “Normal” or “
Warm”.
Exit
Exit
Picture
Mode
Adjust
Color Tone
Size
Move
ˇ Dynamic
Select
: Normal
: Normal
Exit
ˆ
ˆ
S P E C I A L F E AT U R E S
Changing the Screen Size
1
Picture
Press the MENU button to
display menu.
Mode
Adjust
Color Tone
Size
ˇ Dynamic
ˆ
ˆ
: Cool
: Normal
Press the ˇ or ˆ button to
select “Picture”.
Move
Select
2
Exit
Picture
Press the ▲ or ▼ button
to select "Size".
Mode
Adjust
Color Tone
Size
Move
ˇ Dynamic
ˆ
ˆ
: Cool
: Normal
Select
3
Exit
Picture
Press the ˇ or ˆ button
repeatedly to select
“Normal” or “Zoom”.
Mode
Adjust
Color Tone
Size
ˇ Dynamic
ˆ
ˆ
: Cool
: Zoom
Press the EXIT button to
exit.
Move
•
•
Select
Exit
Normal : Sets the picture to 4:3 normal mode. This is a standard TV screen size.
Zoom : Magnifies the size of the picture on screen.
29
S P E C I A L F E AT U R E S
Using the Surf Feature
This feature allows you to set the TV to return to a particular channel after a certain
amount of time. For example, you may be watching a channel when commercials
start. You can set the Surf to “5 minutes”, then switch channels. After 5 minutes,
the TV will return to the original channel. To use the Surf:
1
Surf
Off
While you are watching
the channel to which you
want to return, press the
R.SURF button. The onscreen display will read
“Surf off”.
The time will be decreasing while
you are setting up the timer. And you
will reset it when you pass five minutes or turn it off.
▼
2
Surf
1:
30
Press the R.SURF button
again to set the timer in
thirty second intervals, up
to five minutes.
3
The time you set will begin counting down on the screen.
When the time runs out, the TV will return to the channel you
were watching when you set the timer.
30
S P E C I A L F E AT U R E S
Extra Sound Settings
• Auto Volume
Each broadcasting station has its own signal conditions, and so it is not easy for you to
adjust the volume every time the channel is changed. “Auto volume” lets you automatically adjust the volume of the desired channel by lowering the sound output when
the modulation signal is high or by raising the sound output when the modulation signal is low.
1
Press the MENU button to
display the menu.
Press the ▲ or ▼ button
to select “Sound” menu,
then press the ˇ or ˆ
button.
Sound
Auto Volume
Move
Select
2
Press the ˇ or ˆ button
to select “On" or "Off".
: Off
Exit
Sound
Auto Volume
: On
Press the EXIT button to
exit.
Move
Select
Exit
31
S P E C I A L F E AT U R E S
Setting the On/Off Timer
Press the MENU button to
display the on-screen
menu.
Press the ▲ or ▼ button
to select “Function”, then
press the ˇ or ˆ button.
Function
Language
Time
Caption
Move
ˇ English
Select
2
Press the ▲ or ▼ button
to select “Time” then
press the ˇ or ˆ button.
The Time menu will
appear on the screen.
Before using the timer, you must
set the TV’s clock. (See “Setting the
Clock” on page 25).
▼
1
ˆ
ˆ
ˆ
Exit
Function
Time
Clock
10 : 30 am
On time
Off time
- - : - - am Off
- - : - - am Off
Move
Select
Exit
▼
When you set the hours, make
sure the correct time of day (AM or
PM) appears to the right of the hour.
3
Press the ▲ or ▼ button
to select "On time".
Press the ˇ or ˆ button
to select the “On time”
hours.
(The hours digits will be
highlighted.)
Function
Time
Clock
10 : 30 am
On time
Off time
06 : 00 am Off
- - : - - am Off
Move
Select
Exit
Press the ▲ or ▼ button
repeatedly to select the
appropriate hours (i.e., the
hour when the TV will turn
on.)
4
Press the ˆ button to
select the “On time” minutes.
(The minutes digits will be
highlighted.)
Press the ▲ or ▼ button
to select the appropriate
minutes.
32
Function
Time
Clock
10 : 30 am
On time
Off time
06 : 30 am Off
- - : - - am Off
Move
Select
Exit
S P E C I A L F E AT U R E S
To deactivate the “On time”,
select “Off” during this step.
▼
5
Press the ˆ button to
select “On/Off”.
Press the ▲ or ▼ button to
turn the on-timer “On”.
(Repeatedly pressing the ▲
or ▼ button will alternate
between on and off.)
Function
Time
Clock
10 : 30 am
On time
Off time
06 : 30 am On
- - : - - am Off
Move
Select
Exit
6
When finished, press the ˆ
button .
7
To set the Off time, press
the ▲ or ▼ button to
select “Off time”.
Press the ˆ button and
set the hours and minutes.
(Follow the same procedure as in steps 3-6
above.)
Function
Time
Clock
10 : 30 am
On time
Off time
06 : 30 am On
- - : - - am Off
Move
Select
Exit
Press the EXIT button to
exit.
Setting the Sleep Timer
The sleep timer automatically shuts off the TV after a preset time
(from 10 to 180 minutes).
▼
After about 5 seconds, the sleep
display will disappear from the
screen, and the time interval will be
set.
Press the SLEEP button
repeatedly until the appropriate time interval
appears (any of the preset
values from “Off” to
“180”).
Sleep Timer :
30
33
S P E C I A L F E AT U R E S
Viewing Closed Captions
Your TV decodes and displays the closed captions that are broadcast with certain TV shows.
These captions are usually subtitles for the hearing impaired or foreign-language translations.
All VCRs record the closed caption signal from television programs, so home-recorded video
tapes also provide closed captions. Most pre-recorded commercial video tapes provide closed
captions as well. Check for the closed caption symbol in your television schedule and on the
tape’s packaging:
.
1
Press the MENU button to
display the on-screen
menu.
Press the ▲ or ▼ button
to select “Function”, then
press the ˇ or ˆ button.
Function
Language
Time
Caption
Move
ˇ English
Select
Exit
2
Press the ▲ or ▼ button
to select the “Caption”,
then press the ˇ or ˆ
button.
ˆ
ˆ
ˆ
Function
Caption
Mode
Channels
Field
Move
:
:
:
:
Select
Off
Caption
1
1
Exit
Misspellings and unusual
characters sometimes occur during
closed caption transmissions, especially those of live events. There may be a
small delay before captions appear
when you change channels. These are
not malfunctions of the TV.
▼
3
Press the ˇ or ˆ button
to turn closed captioning
on/off.
Function
Caption
Mode
Channels
Field
Move
:
:
:
:
Select
On
Caption
1
1
Exit
In caption mode, captions
appear at the bottom of the screen,
and they usually cover only a small
portion of the picture.
▼
4
Press the ▲ or ▼ button
to select “Mode”.
Press the ˇ or ˆ button
to select “Caption” or
“Text”.
Function
Caption
Mode
Channels
Field
Move
:
:
:
:
Select
On
Caption
1
1
Exit
Depending on the particular broadcast, it might be necessary to
make changes to “Channels” and “Field”:
Use the ▲, ▼, ˇ and ˆ buttons to make the changes. (Follow
the same procedure as in steps 3~4 above.)
Press the EXIT button to exit.
34
Different channels and fields
display different information: Field 2
carries additional information that
supplements the information in
Field 1. (For example, Channel 1
may have subtitles in English, while
Channel 2 has subtitles in Spanish.)
▼
5
In text mode, information unrelated
to the program, such as news or
weather, is displayed. Text often
covers a large portion of the screen.
Chapter Five
TROUBLESHOOTING
If the TV seems to have a problem, first try this list of possible problems and solutions.
If none of these troubleshooting tips apply, then call your nearest service center.
Identifying Problems
Problem
Possible Solution
Poor picture
Try another channel.
Adjust the antenna.
Check all wire connections.
Poor sound quality.
Try another channel.
Adjust the antenna.
No picture or sound.
Try another channel.
Press the TV/VIDEO button.
Make sure the TV is plugged in.
Check the antenna connections.
No color, wrong colors or tints.
Make sure the program is broadcast in color.
Adjust the picture settings.
If the set is moved or turned in a different
direction, the power should be OFF for
at least 30 minutes.
Picture rolls vertically.
Adjust the antenna.
Check all wire connections.
The TV operates erratically
Unplug the TV for 30 seconds, then try
operating it again.
The TV won’t turn on.
Make sure the wall outlet is working.
35
APPENDIX
Cleaning and Maintaining Your TV
With proper care, your TV unit will give you many years of service. Please follow these
guidelines to get the maximum performance from your TV.
Placement
• Do not place the TV near extremely hot, cold, humid or dusty places.
• Do not place the TV near appliances with electric motors that create magnetic fields,
such as vacuum cleaners.
• Keep the ventilation openings clear; do not place the TV on a soft surface, such as
cloth or paper.
• Place the TV in a vertical position only.
Liquids
• Do not handle liquids near or on the TV. Liquids that spill into it can cause serious
damage.
Cabinet
• Never open the cabinet or touch the parts inside.
• Wipe your TV with a clean, dry cloth. Never use water, cleaning fluids, wax, or
chemicals.
• Do not put heavy objects on top of the cabinet.
Temperature
• If your TV is suddenly moved from a cold to a warm place, unplug the power cord,
and allow at least two hours for moisture that may have formed inside the unit to dry
completely.
Using Your TV in Another Country
If you plan to take your TV with you to a foreign country, please be aware of the different
television systems that are in use around the world. A TV designed for one system may
not work properly with another system due to differences in the TV channel frequencies.
Specifications
Model
CL21M16MJ / CL21N11MJ
Voltage
AC 100-240V
Frequency of Operation
50/60Hz
Dimensions (mm/inches)
590 x 492 x 464 / 23.22 x 19.37 x 18.27
Weight (Kg/ lbs)
36
22.5 / 49.60
MEMO
37
Printed in Mexico
AA68-03521A (ENG)

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement