Samsung | AST18SJGE/XBG | Samsung AST18SJGE/XBG Manual de Usuario

Outdoor unit
AST18SJGB
AST18SJGBS
AST18SJGE
AST18SJGES
AST24S6GBD(S)
AST24S6GED(S)
UST18SJGB
UST18SJGBS
UST18SJGE
UST18SJGES
UST24S6GBD(S)
UST24S6GED(S)
Split-type Room Air Conditioner (Cool)
Aire acondicionado doméstico sistema Split (Refrigeración)
Climatiseur de type Séparé (Refroidissement)
E S F A DB98-20883A(2)
ENGLISH
ESPAÑOL
Indoor unit
FRANÇAIS
OWNER’S INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MANUEL D’UTILISATION
Register your product at www.samsung.com/global/register
Safety Precautions
You should take the following safety precautions when using your air conditioner.
WARNING
DURING
OPERATION
• If you don’t follow the safety precautions, you may get the risk of an electric
shock, injury or death.
•The manufacturer or qualified service personnel must install this air conditioner.
• Unplug the electric power before repairing, installing or cleaning.
◆ Do not repair the air conditioner at your discretion.
It is recommended to contact a service center directly.
◆ Never spill any kind of liquid on the air conditioner.
If this happens, unplug or turn off the air conditioner and contact an
authorized service center.
◆ Do not insert anything between the airflow blades to prevent damage of
the inner fan and consequent injury. Keep children away from the air
conditioner.
◆ Do not place any obstacles in front of the air conditioner.
◆ Do not spray any kind of liquid into the indoor unit. If this happens,
turn off the breaker and contact a service center.
◆ Make sure that the air conditioner is well ventilated at all times:
Do not place a cloth or other materials over it.
◆ Remove the batteries if you don’t use the remote control for a long
time. (If applicable)
◆ Use the remote control within 7 meters from the indoor unit. (If applicable)
DISPOSING OF THE UNIT
◆ Before throwing out the air conditioner, remove the batteries from the
remote control.
◆ When you dispose of the air conditioner, consult your dealer. If pipes
are removed incorrectly, refrigerant may blow out and cause air
pollution. When it contacts with your skin, it can cause skin injury.
◆ The package of the air conditioner should be recycled or disposed
properly for environmental reasons.
OTHERS
◆ Never store or load the air conditioner upside down or sideways to
prevent the damage of the compressor.
◆ Young children or infirm persons should be always supervised when
they use the air conditioner.
◆ Max current is measured according to IEC standard for safety.
◆ Current is measured according to ISO standard for energy efficiency.
E-2
ENGLISH
Contents
◆ PREPARING YOUR AIR CONDITIONER
■ Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
■ View of the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
■ Remote Control-Buttons and Display . . . . . . . . . . . . . . . . . . . . . .
■ Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
■ Inserting the Remote Control Batteries . . . . . . . . . . . . . . . . . . . . .
2
4
6
7
8
◆ OPERATING YOUR AIR CONDITIONER
■ Selecting the Automatic Operating Mode . . . . . . . . . . . . . . . . . . .
■ Cooling Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
■ Changing the Room Temperature Quickly . . . . . . . . . . . . . . . . . .
■ Removing Excess Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
■ Airing Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
■ Selecting Energy Saving Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .
■ Adjusting the Air Flow Direction Vertically . . . . . . . . . . . . . . . . . . .
■ Adjusting the Air Flow Direction Horizontally . . . . . . . . . . . . . . . .
9
10
11
12
13
14
15
15
◆ PROGRAMMING YOUR AIR CONDITIONER
■ Setting the On Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
■ Setting the Off Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
■ Setting the Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
◆ RECOMMENDATIONS FOR USE
■ Operating Recommendation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
■ Temperature and Humidity Ranges . . . . . . . . . . . . . . . . . . . . . . . .
■ Operating Your Air Conditioner Without the Remote Control . . . . .
■ Solving Common Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
■ Cleaning Your Air Conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . .
■ Cleaning Deodorizing and Bio filter (Option) . . . . . . . . . . . . . . . . .
19
19
20
21
22
22
◆ TECHNICAL SPECIFICATIONS
E-3
View of the Unit
The design and shape are subject to change according to the model.
Indoor Unit
On/Off switch
Air filter
(under the grille)
Air Inlet
Remote senser
Air flow blades
(outlet)
Operation indicator
(GREEN)
Timer indicator
(ORANGE)
E-4
Turbo indicator
(GREEN)
ENGLISH
Outdoor Unit
UST18SJGB
UST18SJGBS
UST18SJGE
UST18SJGES
Air Inlet(Rear)
Air Outlet
Connection Valve
Outdoor Unit
UST24S6GBD(S)
UST24S6GED(S)
Air Inlet(Rear)
Air Outlet
Connection Valve
E-5
Remote Control - Buttons and Display
Remote control
transmission indicator
Operating mode
(
AUTO,
DRY,
COOL,
FAN)
Temperature setting
Turbo mode
Sleep mode
Energy saving
Fan speed
Air flow direction
On Timer setting
Off Timer setting
Mode selection button
(AUTO, COOL, DRY, FAN)
Temperature adjustment
buttons
Turbo/Sleep mode
selection button
Fan speed adjustment button
Swing button
On Timer button
Off Timer button
Battery discharge indicator
Energy Saving button
E-6
On/Off &
Timer Set/Cancel button
ENGLISH
Getting Started
You have just purchased a split type air conditioner and it has been
installed by your installation specialist.
Your Owner’s Instructions contains valuable information on using your
air conditioner. Please take the time to read it as it will help you take full
advantage of the unit’s features.
The booklet is organized as follows.
◆ The following figures are shown on pages from 4 to 6 :
- Indoor and outdoor units
- Remote control(buttons and display)
They will help you find the buttons and understand the symbols displayed.
◆ In the manual, you will find a series of step-by-step procedures for each
function available.
The illustrations in the step-by-step procedures use three different symbols:
PRESS
PUSH
HOLD DOWN
E-7
Inserting the Remote Control Batteries
You must insert or replace the remote control batteries when :
◆ You purchase the air conditioner
◆ The remote control does not work correctly
Note
E-8
◆
◆
◆
◆
Use two AAA, LR03 1.5V batteries.
Do not use old batteries or different kinds of batteries together.
Batteries may be completely discharged after 12 months, even
if they have not actually been used.
1
Push the battery cover on the rear of the remote control with your thumb
in the direction of the arrow and remove it.
2
Insert the two batteries, taking care to respect the polarities :
◆ + on the battery with + on the remote control.
◆ - on the battery with - on the remote control.
3
Close the cover by sliding it back until it clicks into place.
ENGLISH
Selecting the Automatic Operating Mode
You can start the air conditioner in Automatic mode from your remote
control. In the Automatic mode, the standard temperature and the
optimum fan speed is selected automatically. You can adjust the
standard temperature but not the fan speed.
1
If necessary, press the
Result:
(On/Off) button.
◆ The air conditioner starts up in Cool mode with
Turbo fan speed.
◆ The operation indicator on the indoor unit lights up.
◆ The indoor unit beeps.
IMPORTANT
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆ Plugged in
◆ Stopped
lt will start up normally after three minutes.
2 If the
is not displayed at the top of the remote control,
press the
button on the remote control one or more times until it
appears.
3
Result:
◆ The indoor unit beeps each time you press the
◆ The air conditioner runs in AUTO mode.
Note
You can change modes at any time.
button.
To adjust the standard temperature (The air conditioner automatically
set the standard temperature by the current room temperature.),
press the
button one or more times.
SET TEMP. SET TEMP.
-2°C
-1°C
< When you feel hot >
Standard temperature
SET TEMP. SET TEMP.
+1°C
+2°C
< When you feel chilly >
E-9
Cooling Your Room
You must select the Cool mode if you wish to adjust the:
◆ Cooling temperature
◆ Fan speed when cooling
1
If necessary, press the
Result:
(On/Off) button.
◆ The air conditioner starts up in Cool mode with
Turbo fan speed.
◆ The operation indicator on the indoor unit lights up.
◆ The indoor unit beeps.
IMPORTANT
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆ Plugged in
◆ Stopped
lt will start up normally after three minutes.
2 If the
is not displayed at the top of the remote control,
press the
button on the remote control one or more times until it
appears.
3
Result:
◆ The indoor unit beeps each time you press the
◆ The air conditioner runs in COOL mode.
Note
You can change modes at any time.
To adjust the temperature, press the
button one or more times until
the required temperature is displayed.
Possible temperatures are between 18°C and 30°C inclusive.
Result:
4
button.
◆ Each time you press the
button:
- The temperature is adjusted by 1°C
- The indoor unit beeps
◆ The air conditioner starts cooling, provided that the room
temperature is higher than the selected temperature.
◆ If the room temperature reaches the set temperature, the air
conditioner stops cooling, but the fan is still operating.
Select the fan speed by pressing the
until the required setting is displayed:
Automatic (rotated :
button one or more times
)
Low
Medium
High
Turbo (maximum)
Result:
5
button, the indoor unit beeps.
To control the direction of the air flow, refer to page 15.
Note
E-10
Each time you press the
If you turn off the air conditioner in Cool mode, the set temperature
is adjusted as below when you turn on the air conditioner again.
Previous set temperature
Set temperature
Over 24°C
Below 24°C
24°C
Previous set temperature
ENGLISH
Changing the Room Temperature Quickly
The Turbo cooling function is used to cool your room as quickly as possible.
Example :
You have just come home and find that the room is very
hot. You wish to cool it down as quickly as possible.
The Turbo function operates for 30 minutes with the maximum settings before
returning automatically to the mode and temperature previously selected.
1
If necessary, press the
Result:
(On/Off) button.
◆ The air conditioner starts up in Cool mode with
Turbo fan speed.
◆ The operation indicator on the indoor unit lights up.
◆ The indoor unit beeps.
2
Press the
Result:
3
◆ The temperature and fan settings are adjusted automatically.
◆ The air conditioner cools the room as quickly as possible.
◆ After 30 minutes, the air conditioner is reset automatically to the
previous mode, temperature and fan settings.
But, if you press the
button in DRY or FAN mode,
it will change to AUTO mode automatically.
If you wish to stop the Turbo function before the end of the 30-minute period,
press the
button one or more times until
or
disappears.
Result:
4
button.
The air conditioner is reset automatically to the previous mode,
temperature and fan settings.
To control the direction of the air flow, refer to page 15.
E-11
Removing Excess Humidity
If the atmosphere in your room is very humid or damp, you can remove
excess humidity without lowering the room temperature too much.
1
If necessary, press the
Result:
(On/Off) button.
◆ The air conditioner starts up in Cool mode with
Turbo fan speed.
◆ The operation indicator on the indoor unit lights up.
◆ The indoor unit beeps.
IMPORTANT
2
If the
is not displayed at the top of the remote control, press the
button on the remote control one or more times until it appears.
Result:
Note
3
E-12
◆ The indoor unit beeps each time you press the
◆ The air conditioner runs in DRY mode.
You can change modes at any time.
button.
To adjust the temperature, press the
button one or more times
until the required temperature is displayed.
Possible temperatures are between 18°C and 30°C inclusive.
Result:
4
The air conditioner is fitted with a protection mechanism
to prevent the unit from being damaged when it is started
immediately after being:
◆ Plugged in
◆ Stopped
It will start up normally after three minutes.
◆ Each time you press the
button:
- The temperature is adjusted by 1°C
- The indoor unit beeps
◆ The air conditioner starts removing the excess humidity;
the quantity of air is adjusted automatically.
To control the direction of the air flow, refer to page 15.
ENGLISH
Airing Your Room
If the atmosphere in your room is stale, you can air the room using
the Fan feature.
1
If necessary, press the
Result:
(On/Off) button.
◆ The air conditioner starts up in Cool mode with
Turbo fan speed.
◆ The operation indicator on the indoor unit lights up.
◆ The indoor unit beeps.
2
If the
is not displayed at the top of the remote control,
press the
button on the remote control one or more times until it
appears.
Result:
Note
3
◆ The indoor unit beeps each time you press the
◆ The air conditioner runs in FAN mode.
◆ The temperature is set automatically.
You can change modes at any time.
Select the fan speed by pressing the
until the required setting is displayed:
Low
button.
button one or more times
Medium
High
Result:
4
Each time you press the
button, the indoor unit beeps.
To control the direction of the air flow, refer to page 15.
E-13
Selecting Energy Saving Mode
If you wish to save energy when using your air conditioner, select the
Energy saving mode with the Energy saving button.
1
If necessary, press the
Result:
(On/Off) button.
◆ The air conditioner starts up in Cool mode with
Turbo fan speed.
◆ The operation indicator on the indoor unit lights up.
◆ The indoor unit beeps.
IMPORTANT
2
Select COOL mode by pressing the
Note
3
button.
◆
◆
◆
◆
The indoor unit beeps.
The air conditioner runs in the Energy saving mode.
The outer air flow blade moves up and down.
To stop the Energy saving mode, press the
again.
To adjust the temperature, press the
button one or more times
until the required temperature is displayed. Possible temperatures are
between 26°C and 30°C inclusive.
Note
E-14
button.
You can select the Energy saving mode only in COOL mode.
Press the
Result:
4
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆ Plugged in
◆ Stopped
lt will start up normally after three minutes.
If you want to adjust temperature under 26°C, cancel the
Energy saving mode before adjusting the temperature.
5
To select the fan speed, press the
the required setting is displayed.
button one or more times until
6
To control the direction of the air flow, refer to page 15.
ENGLISH
Adjusting the Air Flow Direction Vertically
Depending on the position of the indoor unit on the wall of your
room, you can adjust the position of the outer air flow blade on the
bottom of the unit, thus increasing the efficiency of the air
conditioner.
1
Press the
Result:
button one or more times as required.
The outer blade is adjusted vertically.
RECOMMENDATION
2
Adjust the blade to face...
Cooling
Upwards.
If you want the blade to move up and down automatically when the air
conditioner is operating, press the
button.
Result:
3
When...
The blade move up and down, around the base position set.
To stop the blade moving up and down, press the
Note
button again.
If you switch the air conditioner... Then the blade is...
Off
Closed completely.
On again
Set to the initial position powered.
Adjusting the Air Flow Direction Horizontally
There are two sets of inner air flow blades. Just as the outer air flow
blade can be adjusted vertically, the inner blades can be adjusted
horizontally.
1
Adjust each set of inner blades to the required position, by pushing or
pulling them sideways.
E-15
Setting the On Timer
The On Timer enables you to switch on the air conditioner automatically
after a given period of time. You can set the period of time from
30 minutes to 24 hours.
1
To set the operating time, press the
button one or more times until
the required time is displayed. Possible time is between 0.5 hour and
24 hours inclusive.
2
Press the
Result:
3
(Set/Cancel) button to complete the setting.
◆ The remaining time is displayed.
◆ Blinking of the timer indicator stops.
◆ The selected mode and the temperature on the display
disappear after 10 seconds.
◆ The air conditioner will switch on automatically when the
counter displayed on the remote control reaches the set time
and disappears the On timer setting.
To select an operating mode in advance, press the
button until the
desired mode is displayed at the top of the remote control.
Result:
The air conditioner will run in the selected mode when it is
turned on.
To Cancel the On Timer
1
To cancel the On Timer, press the
timer setting disappears.
2
Press the
Note
E-16
button one or more times until the
(Set/Cancel) button.
If you want to turn on the air conditioner before the timer reaches
the setting time, press the (On/Off) button.
ENGLISH
Setting the Off Timer
The Off Timer enables you to switch off the air conditioner automatically
after a given period of time. You can set the period of time from
30 minutes to 24 hours.
1
To set the operating time, press the
button one or more times until
the required time is displayed. Possible time is between 0.5 hour and
24 hours inclusive.
2
Press the
Result:
(Set/Cancel) button to complete the setting.
◆ The remaining time is displayed.
◆ Blinking of the timer indicator stops.
◆ The air conditioner will switch off automatically when the
counter displayed on the remote control reaches the set time
and disappears the Off timer setting.
Example If you would like to turn the air conditioner on after 2 hours
and to operate it for 2 hours:
1. Press the
2. Press the
3. Press the
4. Press the
Note
button until ‘2.0 Hr’ is displayed.
(Set/Cancel) button.
button until ‘4.0 Hr’ is displayed.
(Set/Cancel) button.
You can see or change the setting mode and/or the temperature
by pressing the
button or the
button after setting the
Off timer.
To Cancel the Off Timer
1
To cancel the Off Timer, press the
timer setting disappears.
2
Press the
Note
button one or more times until the
(Set/Cancel) button.
If you want to turn off the air conditioner before the timer reaches
the setting time, press the
(On/Off) button.
E-17
Setting the Sleep Timer
The Sleep Timer can be used when you are cooling your room to
switch the air conditioner off automatically after a period of 6 hours.
Note
If you wish to switch the unit off at a specific time,
refer to page 17.
1
Make sure that you have selected COOL mode.
2
Press the
button one or more times until
remote control.
◆ The indoor unit beeps.
◆ The air conditioner will be controlled as indicated in the
illustrations below.
Result:
Cooling
appears on the
The desired temperature is
increased by 1°C every hour.
When it has been increased
by 2°C (after 2 hours), the
temperature is maintained for
four hours.
To Cancel the Sleep Timer
If you no longer wish to use the Sleep Timer that you have set, you
can cancel it at any time.
Press the
Result:
E-18
button.
◆
The indoor unit beeps.
◆
The
◆
The air conditioner operates normally.
is no longer displayed.
ENGLISH
Operating Recommendation
Here is a recommendation that you should follow when using your
air conditioner.
Topic
Recommendation
Power failure
If a power failure occurs when the air
conditioner is operating, the unit is switched off.
When the power returns, the air conditioner
starts up again automatically.
Temperature and Humidity Ranges
The following table indicates the temperature and humidity ranges within which the air conditioner can be used.
If the air conditioner is used at...
Then...
High temperatures
The automatic protection feature may be triggered and the air conditioner stopped.
Low temperatures
A water leak or some other malfunction may occur if the heat exchanger freezes.
High humidity levels
Water may condense on and drip from the surface of the indoor unit if it is used for long periods.
Mode
Outdoor Temperature
Indoor Temperature
Indoor Humidity
Cooling
Drying
21°C to 54°C approx.
18°C to 54°C approx.
18°C to 32°C approx.
18°C to 32°C approx.
80% or less
-
❇
If the cooling operation is used at over 33°C(indoor temperature), it does not cool at its full capacity.
E-19
Operating Your Air Conditioner Without the Remote Control
Your air conditioner can be operated directly from the indoor unit if
the remote control is lost or broken.
1
Open the upper front grille by pulling right and left sides of the grille.
Slide the lower front grille down.
2
To switch the air conditioner on, press the On/Off switch on the right
side of the indoor unit.
Result: ◆ The Operation indicator on the indoor unit comes on.
◆ The indoor unit beeps.
◆ The air conditioner starts up in the most suitable mode for
the room temperature:
3
Operating Mode
21°C or above
Cool
To switch the air conditioner off, press the On/Off switch again.
Note
E-20
Room Temperature
Even if the air conditioner has been switched on via the
On/Off switch, operations can still be controlled using the
remote control as usual.
ENGLISH
Solving Common Problems
Before contacting the after-sales service, perform the following simple checks.
They may save you the time and expense of an unnecessary call.
Explanation/Solution
Problem
The air conditioner does not
operate at all
◆ Check that the breaker used for the air conditioner is switched on.
◆ Check that the operation indicator on the indoor unit is on;
if necessary press the
(On/Off) button on the remote control.
◆ Check whether the Timer indicator on the indoor unit is switched on.
If so:
- Wait until the switch-on time is reached and the air conditioner starts
up automatically
- Cancel the timer (see pages 16 and 17 for further details)
The air conditioner does not
operate with the remote control
◆ Check that there are no obstacles between you and the indoor unit.
◆ Check the remote control batteries.
◆ Check that you are close enough to the indoor unit (seven meters/
yards or less).
No beep is heard when you press
the
(On/Off) on the remote
control
◆ Check that you are pointing the remote control at the remote control
sensor in the right of the indoor unit.
◆ Replace the remote control batteries if necessary.
The air conditioner does not cool
◆ Check that the correct operating mode has been selected (AUTO,
COOL).
◆ The room temperature may be too low.
◆ Dust may be blocking the air filter guard; refer to page 22 for cleaning
instructions.
◆ Check that there is no obstacle in front of the outdoor unit.
The fan speed does not change
when you press the
button
◆ Check that the operating mode is set to COOL or FAN ; in the
AUTO mode, the fan speed changes automatically and in the
DRY mode, it is set to AUTO.
The air flow direction does not
change when you press the
button
◆ Check that the air conditioner has been switched on; if necessary,
press the
(On/Off) button on the remote control.
The timer is not correctly triggered
◆ Check that the timer has been programmed correctly; see pages 16
and 17.
Odour is permeated in the room
during air conditioning
◆ Air the room.
E-21
Cleaning Your Air Conditioner
For the best use of your air conditioner, you must clean it every two
weeks regularly to remove the dust that accumulates on the air filter.
IMPORTANT
Upper front
grille
Before cleaning your air conditioner, ensure that you
have switched off the breaker used for the unit.
1
Open the upper front grille by pulling right and left sides of the grille.
2
Slide the lower front grille down.
3
Lift out the bottom edge of the air filters and pull down to release them.
4
Remove all dust on the air filters with a vacuum cleaner or brush.
5
When you have finished, insert the top part of the filters into their slot
and push down on the bottom edge until they click into place.
6
Clean the front grille with a damp cloth and mild detergent (do NOT use
benzene, solvents or other chemicals).
Hook
Body
groove
Lower
front
grille
Body groove
Hook
Note
If you have not used the air conditioner for a long period of time, set the
fan going for three to four hours to dry the inside of the air conditioner
thoroughly.
Cleaning Deodorizing and Bio filter (Option)
To remove minute dust particles and odors, deodorizing and Bio filter
are installed in the air conditioner. You should clean the filters every
3 months.
Deodorizing Filter
1
Open the upper front grille by pulling right and left sides of the grille.
2
Pull out the deodorizing and Bio filter.
3
Wash the filters with clean water, then dry them in the shade.
4
Insert the filters into the original position.
Bio Filter
Note
5
E-22
You can change the position of filters with each other.
Close the front grille.
ENGLISH
Technical Specifications
Model Indoor unit
Power Supply
AST18SJGB
AST18SJGBS
220V~, 60Hz
AST24S6GBD(S)
AST18SJGE
AST18SJGES
220-240V~, 50Hz
AST24S6GED(S)
E-23
THIS AIR CONDITIONER IS MANUFACTURED BY:
ESTE AIRE ACONDICIONADO HA SIDO FABRICADO POR:
CE CLIMATISEUR EST FABRIQUE PAR:
ELECTRONICS
Download PDF