Samsung | RF62UBRS | Samsung 452 л. холодильник French Door RF62UBRS Operating instrustions

Refrigerator
user manual
English
imagine the possibilities
Thank you for purchasing a Samsung product.
To receive a more complete service,
please register your product at
www.samsung.com/register
Free Standing Appliance
DA68-01868N.indb
1
2010.4.14
1:26:40 PM
features of your new refrigerator
KEY FEATURES OF YOUR NEW REFRIGERATOR
Your Samsung Refrigerator comes equipped with various innovative storage and energy-efficient features.
• Twin Cooling System
The Refrigerator and Freezer have separate evaporators. Due to this independent cooling system,
the Freezer and Refrigerator cool more efficiently.
Additionally, this separate air flow system prevents food odor of one compartment from seeping
into other compartments.
• Bigger & Wider Space
The wide shelf area provides enough space for larger items.
The wide freezer drawer also provides enough space for 2~3 turkeys.
• Secure Auto Close
The Secure Auto Close feature will automatically close a door that is slightly open.
• Digital Display and Temperature Control
• Door Alarm
A helpful beeper alerts you if a door is ajar.
CE Notice
This product has been determined to be in compliance with the Low Voltage Directive (2006/95/
EC), the Electromagnetic Compatibility Directive (2004/108/EC) and Energy efficiency Directive
(96/57/EC) of the European Union.
For easy future reference, write the model and
serial number down. You will find your model
number and serial number on the left side of the
refrigerator.
Model # Serial # 02_ features
DA68-01868N.indb
2
2010.4.14
1:26:41 PM
safety information
SAFETY INFORMATION
• Before operating the appliance, please read this manual thoroughly and retain it at a safe place
near the appliance for your future reference.
• Use this appliance only for its intended purpose as described in this instruction manual. This
appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety.
• Warnings and Important Safety Instructions in this manual do not cover all possible conditions and
situations that may occur. It is your responsibility to use common sense, caution, and care when
installing, maintaining, and operating your appliance.
• Because these following operating instructions cover various models, the characteristics of your
refrigerator may differ slightly from those described in this manual and not all warning signs may be
applicable. If you have any questions or concerns, contact your nearest service center or find help
and information online at www.samsung.com.
Important safety symbols and precautions :
WARNING
Hazards or unsafe practices that may result in severe personal injury or
death.
caution
Hazards or unsafe practices that may result in minor personal injury or
property damage.
Do NOT attempt.
Do NOT disassemble.
Do NOT touch.
Follow directions carefully.
Unplug the power plug from the wall socket.
Make sure the machine is grounded to prevent electric shock.
Call the contact center for help.
Note.
These warning signs are here to prevent injury to you and others.
Please follow them carefully.
After reading this section, keep it in a safe place for future reference.
safety information _03
DA68-01868N.indb
3
2010.4.14
1:26:41 PM
safety information
WARNING
Severe warning signs for transportation and site
• When transporting and installing the appliance, care should be taken to ensure that no parts of
the refrigerating circuit are damaged.
- Refrigerant leaking from the pipe work could ignite or cause an eye injury. If a leak is
detected, avoid any naked flames or potential sources of ignition and air the room in which
the appliance is standing for several minutes.
• In order to avoid the creation of a flammable gas-air mixture if a leak in the refrigerating circuit
occurs, the size of the room in which the appliance may be sited depends on the amount of
refrigerant used.
• Never start up an appliance showing any signs of damage. If in doubt, consult your dealer. The
room where the refrigerator will be sited must be 1m³ in size for every 8g of R600a refrigerant
inside the appliance. The amount of refrigerant in your particular appliance is shown on the
identification plate inside the appliance.
WARNING
Severe warning signs for installation
• Do not install the refrigerator in a damp place or place where it may come in contact with water.
- Deteriorated insulation of electrical parts may cause an electric shock or fire.
• Do not place this refrigerator in direct sunlight or expose to the heat from stoves, room heaters
or other appliance.
• Do not plug several appliances into the same multiple power board.
The refrigerator should always be plugged into its own individual electrical which has a voltage
rating that matched the rating plate.
- This provides the best performance and also prevents overloading house wiring circuits,
which could cause a fire hazard from overheated wires.
• If the wall socket is loose, do not insert the power plug.
- There is a risk of electric shock of fire.
• Do not use a cord that shows cracks or abrasion damage along its length or at either end.
• Do not bend the power cord excessively or place heavy articles on it.
• Never unplug your refrigerator by pulling on the power cord. Always grip plug firmly and pull
straight out from the outlet.
- Damage to the cord may cause short-circuit, fire and/or electric shock.
• Do not use aerosols near the refrigerator.
- Aerosols used near the refrigerator may cause an explosion or fire.
• This refrigerator must be properly installed and located in accordance with the manual before it
is used.
• After unpacking, keep the packing materials out of reach of children.
- There is a risk of death from suffocation if children put them over their head.
• Connect the power plug in proper position with the cord hanging down.
- If you connect the power plug upside down, wire can get cut off and cause fire or electric
shock.
• Make sure that the power plug is not squashed or damaged by the back of the refrigerator.
• When moving the refrigerator, be careful not to roll over or damage the power cord.
- This constitutes a fire hazard.
• The appliance must be positioned so that the plug is accessible after installation.
• The refrigerator must be grounded.
04_ safety information
DA68-01868N.indb
4
2010.4.14
1:26:41 PM
safety information
- You must ground the refrigerator to prevent any power leakages or electric shocks caused
by current leakage from the refrigerator.
• Never use gas pipes, telephone lines or other potential lightening rods as ground.
- Improper use of the ground plug can result in electric shock.
• If the power cord is damaged, have it replaced immediately by the manufacturer or its service
agent.
• The fuse on the refrigerator must be changed by a qualified technician or service company.
- Failing to do so may result in electric shock or personal injury.
caution
Caution signs for installation
• Allow sufficient space to install the refrigerator on a flat surface.
- If your refrigerator is not level, the internal cooling system may not work correctly.
• Keep ventilation opening in the appliance enclosure or mounting structure clear of obstruction.
• Allow the appliance to stand for 2 hours after installation.
WARNING
SEVERE WARNING SIGNS FOR USING
• Do not insert the power plug with wet hands.
• Do not store articles on the top of the appliance.
- When you open or close the door, the articles may fall and cause personal injury and/or
material damage.
• Do not put items filled with water on the refrigerator.
- If spilled, there is a risk of fire or electric shock.
• Do not let children hang on the door.
- Failure to do so may cause serious personal injury.
• Do not leave the doors of the refrigerator open while the refrigerator is unattended and do not
let children enter inside of the refrigerator.
- There is a risk of children entrapment and serious personal injury because of low
temperature.
• Do not insert your hands into the bottom area under the appliance.
- Any sharp edges may cause personal injury.
• Do not let children step on drawer’s cover.
- It may break and cause slip hazard.
• Do not overfill the refrigerator with food.
- When you open the door, an item may fall out and cause personal injury or material damage.
• Never put fingers or other objects into the dispenser hole.
- Failure to do so may cause personal injury or material damage.
• Do not store volatile or flammable substances such as benzene, thinner, alcohol, ether or LP
gas in the refrigerator.
- The storage of any of such products may cause explosions.
• Do not store low temperature-sensitive pharmaceuticals products, scientific materials or other
low temperature-sensitive products in the refrigerator.
- Products that require strict temperature controls must not be stored in the refrigerator.
• Do not place or use electrical appliance inside the refrigerator, unless they are of a type
recommended by the manufacturer.
• Do not use a hair dryer to dry the inside of the refrigerator. Do not place a lighted candle in the
refrigerator for removing bad odors.
- This may result in electric shock or fire.
• Do not touch the inside walls of the freezer or products stored in the freezer with wet hands.
safety information _05
DA68-01868N.indb
5
2010.4.14
1:26:41 PM
safety information
- This may cause frostbite.
• Do not use mechanical devices or any other means to accelerate the defrosting process, other
than those recommended by the manufacturer.
• Do not damage the refrigerant circuit.
• This product is intended only for the storage of food in a domestic environment.
• Bottles should be stored tightly together so that they do not fall out.
• If a gas leak is detected, avoid any naked flames or potential sources of ignition and air the
room in which the appliance is standing for several minutes.
• Use only the LED Lamps provided by manufacturer or service agents.
• Children should be supervised to ensure that they do not play with and/or climb into the
appliance.
• Do not disassemble or repair the refrigerator by yourself.
- You run risk of causing a fire, malfunction and/or personal injury. In case of malfunction,
please contact your service agents.
• Pull the power plug out of the socket before changing the interior lamps of the refrigerator.
- Otherwise, there is a risk of electric shock.
• If the appliance generates a strange noise, a burning or smell or smoke, unplug the power plug
immediately and contact your nearest service center.
- Failing to do so may result in electric or fire hazards. Keep ventilation opening in the
appliance enclosure or mounting structure clear of obstruction.
• If you experience difficulty when changing the light, contact service agents.
• If the products equipped with LED Lamp, do not disassemble Lamp Cover and LED Lamp by
yourself.
- Please contact your service agents.
• If any dust or water is in refrigerator, pull out power plug and contact your Samsung Electronics
service center.
- There is a risk of fire.
06_ safety information
DA68-01868N.indb
6
2010.4.14
1:26:42 PM
safety information
caution
CAUTION SIGNS FOR USING
• If the refrigerator is disconnected from the power supply, you should wait for at least five
minutes before plugging it back in.
• If you will be away for more than three weeks or the refrigerator will not be used for a long
period of time, you must empty and clean the refrigerator and pull out the power plug. Wipe
excess moisture from the inside and leave the doors open.
- Otherwise, odor and mold may develop.
- Deterioration in the insulation may cause fire.
• If you have a long vacation or business trip and won’t use water or ice dispensers, close the
water valve.
- Otherwise, water leakage may occur.
• To get best performance of product,
- Do not place foods too closely in front of the vents at the rear of the appliance as it can
obstruct free air circulation in the refrigerator compartment.
- Wrap the food up properly or place it in airtight containers before put it into the refrigerator.
• Do not re-freeze frozen foods that have thawed completely.
• Do not place carbonated or fizzy drinks in the freezer compartment. Do not put bottles or glass
containers in the freezer.
- When the contents freeze, the glass may break and cause personal injury and property
damage.
• Do not change the functionality of or modify the refrigerator.
- Changes or modifications may result in personal injury and/or property damage. Any
changes or modifications performed by a 3rd party on this completed appliance is neither
covered under Samsung warranty service, nor is Samsung responsible for safety issues and
damages that result from 3rd party modifications.
• Do not block air holes.
- If the air holes are blocked, especially with a plastic bag, the refrigerator can be over cooled.
If this cooling period lasts too long, the water filter may break and cause water leakage.
- Do not put any newly introduced food for freezing near to already food.
• Please observe maximum storage times and expiry dates of frozen goods.
• Fill water tank, ice tray, water cubes only with potable water.
• Do not place food inside the refrigerator in a haphazard way.
- The food will not cool properly.
• In case the model has Cool Select Zone, do not insert a shell to this rail, or the shelf can collide
with beverage station cover and the beverage station cover can be broken.
•Use only the ice maker provided with the refrigerator.
•The water supply to this refrigerator must only be installed/connected by a suitably qualified
person and connect to a potable water supply only.
•In order to operate the ice maker properly, water pressure of 138 ~ 862kpa(1.4~8.8kgf/cm3) is
required.
• If the appliance is flooded, cut the power immediately and contact your nearest service center.
caution
CAUTION SIGNS FOR CLEANING AND MAINTENANCE
• Do not directly spray water inside or outside the refrigerator.
- There is a risk of fire or electric shock.
• Do not spray inflammable gas near the refrigerator.
- There is a risk of explosion or fire.
safety information _07
DA68-01868N.indb
7
2010.4.14
1:26:42 PM
safety information
• Do not spray cleaning products directly on the display.
- Printed letters on the display may come off.
• Remove any foreign matter or dust from the power plug pins. But do not use a wet or damp
cloth when cleaning the plug, remove any foreign material or dust from the power plug pins.
- Otherwise there is a risk of fire or electric shock.
• Never put fingers or other objects into the dispenser hole and ice chute.
- It may cause personal injury or material damage.
• Unplug the refrigerator before cleaning and performing maintenance.
WARNING
SEVERE WARNING SIGNS FOR DISPOSAL
• Ensure that none of the pipes on the back of the appliance are damaged prior to disposal.
• R600a or R134a is used as a refrigerant. Check the compressor label on the rear of the
appliance or the rating label inside the refrigerator to see which refrigerant is used for your
refrigerator. When this product contains flammable gas (Refrigerant R600a), contact your local
authority in regard to safe disposal of this product. Cyclopentane is used as a insulation blowing
gas. The gases in insulation material require special disposal procedure. Please contact your
local authorities in regard to the environmentally safe disposal of this product. Ensure that none
of the pipes on the back of the appliances are damaged prior to disposal. The pipes shall be
broke in the open space.
• If the appliance contains iso-butane refrigerant (R600a), a natural gas with high environmental
compatibility that is, however, also combustible. When transporting and installing the appliance,
care should be taken to ensure that no parts of the refrigerating circuit are damaged.
• When disposing of this product or other refrigerators, remove the door/door seals, door latch so
that small children or animals cannot become trapped inside. Leave the shelves in place so that
children may not easily climb inside. Children should be supervised to ensure that they do not
play with the old appliance.
• Please dispose of the packaging material for this product in an environmentally friendly manner.
ADDITIONAL TIPS FOR PROPER USAGE
• In the event of a power failure, call the local office of your Electricity Company and ask how long
it is going to last.
- Most power failures that are corrected within an hour or two will not affect your refrigerator
temperatures. However, you should minimize the number of door openings while the power
is off.
- Should the power failure last more than 24 hours, remove all frozen food.
• If keys are provided with the refrigerator, the keys should be kept out of the reach of children
and not in vicinity of the appliance.
• The appliance might not operate consistently (possibility of temperature becoming too warm
in refrigerator) when sited for an extended period of time below the cold end of the range of
temperature for which the refrigerating appliance is designed.
• Do not store food which spoils easily at low temperature, such as bananas, melons.
• Your appliance is frost free, which means there is no need to manually defrost your appliance,
as this will be carried out automatically.
• Temperature rising during the defrost can comply with ISO requirement. But if you want to
prevent an undue rise in the temperature of the frozen food while defrosting the appliance,
please wrap the frozen food in several layers of newspaper.
• Any increase in temperature of frozen food during defrosting can shorten its storage life.
08_ safety information
DA68-01868N.indb
8
2010.4.14
1:26:42 PM
contents
setting up your refrigerator
10
11
14
14
22
23
24
Getting ready to install the refrigerator
Installation of the water line
Setting up the refrigerator
Removing the refrigerator doors
installation of the handles
Adjusting the doors
making minor adjustments between doors
operating your samsung refrigerator
25
26
27
29
30
30
31
32
33
34
35
Parts and features
Using the control panel
Controlling the temperature
Ice Maker Operation
Storing food in the refrigerator
Storing food in the freezer drawer
Removing and relocating the fridge accessories
Removing the freezer accessories
Using the water dispenser (option)
Cleaning the refrigerator
Replacing the interior light (Only available on
some models)
10
25
troubleshooting
36
contents _09
DA68-01868N.indb
9
2010.4.14
1:26:42 PM
setting up your refrigerator
Getting ready to install the refrigerator
Congratulations on your purchase of this Samsung Refrigerator. We hope you enjoy the state-of-art features
and efficiencies that this new appliance offers.
Selecting the best location for the Refrigerator
•
•
•
•
A location with easy access to the water supply.
A location without direct exposure to sunlight.
A location with level (or nearly level) flooring.
A location with enough space for the Refrigerator doors to
open easily.
• Allow sufficient space for air circulation of the internal cooling
system. If the Refrigerator does not have enough space, the
internal cooling system may not work properly.
150mm
100mm
150mm
100mm
100mm
100mm
First thing! Make sure that you can easily move your Refrigerator to its final location by measuring doorways
(both width and height), thresholds, ceilings, stairways, etc.
817mm
817mm
817mm
665mm
RF62* : 1172mm
RF67* : 1222mm
1492mm
RF62* : 1125mm
RF67* : 1175mm
RF62*:1455mm
RF67*:1505mm
1492mm
Drawer-Type
Swing-Type
• Allow clearance to the right, left, back and top when installing. This will help reduce power
consumption and keep your energy bills lower.
• If you install the Refrigerator where is below 10ºC, it may not function in optimum level.
• Do not locate the refrigerator where the wet condition.
When moving your refrigerator
caution
To prevent floor damage be sure the front leveling
legs are in the up position(above the floor).
Refer to ‘Adjusting the doors’ in the manual
(on page 23)
Flat-blade
screwdriver(-)
Control Lever
FLOORING
For proper installation, this refrigerator must be placed on a
level surface of hard material that is the same height as the
rest of the flooring. This surface should be strong enough to
support a fully loaded refrigerator, or approximately 106kg.
To protect the finish of the flooring, cut a large section of the
cardboard carton and place under the refrigerator where you
are working. When moving the refrigerator, be sure to pull it
straight out and return it to position by pushing it straight in.
10_ setting up
DA68-01868N.indb
10
2010.4.14
1:26:48 PM
setting up your refrigerator
Installation of the water line
Before you install the water line
01setting up
• The water line installation is not warranted by the refrigerator manufacturer.
So before you install the water line, read the whole steps for installing and follow these
instructions carefully to minimize the risk of expensive water damage.
• Banging pipes (water banging in the pipes) in house plumbing can cause damage to fridge
parts and lead to water leakage or flooding. Call a qualified plumber to correct the problem
before installing the water supply line to the fridge.
• To prevent burns and product damage, do not hook up the water line to the hot water line.
• Do not install the water line in areas where temperatures fall below freezing.
• When using any electrical device (such as a power drill) during installation, be sure the device is
insulated or wired in a manner to prevent electric shock.
• All installations must be in a accordance with local plumbing code requirements.
• Water line Kit and water filter are not covered by Samsung’s Warranty. The manufacturer (or
dealer, installer) of them is responsible for any defects and all the loss caused by water filter &
water line kit.
• The filter should be replaced according to manufacturer (or dealer)’s instruction.
• To order additional water filters, please contact the manufacturer (or dealer) of the filter.
Check the accessories listed below.
Water line fixer and
screws
Pipe connector
Water line
Fastner
-
Refer to ‘MAKING MINOR ADJUSTMENTS
BETWEEN DOORS’(on page 24)
Using the water filter (not provided)
Connecting to water supply line
• Shut off the main water supply line and turn the Ice maker
to the off position.
• Locate the nearest cold drinking water line.
• Follow the instructions in the water filter installation kit.
• After connecting the water supply line to the Cartridge
Holder inlet and installing the Filter Cartridge (insert plastic
line in fully).
• Turn on water supply and flush 3L into a bucket to clear
the water filter.
• The water filter must be installed outside the refrigerator.
It is not provided with your new refrigerator. The filter
cartridge (8) and holder (9) kit can be purchased from the
retailer where you purchased this refrigerator.
• Do not use copper line.
• Cut the tubing, making sure the ends are square and clean.
1.Cold Water line 4.Compression Nut
2.Pipe Clamp.
5.Compression Sleeve
3.Plastic line
6.Packing Nut
7. Shut Off Valve
8. Filter Cartridge
9.Cartridge Holder
90 degree
Incorrect
Correct
setting up _11
DA68-01868N.indb
11
2010.4.14
1:26:50 PM
Connect the water line to the fridge
• Connect the plastic line on the back of your fridge to the
cartridge holder outlet (fully insert the plastic line to the
cartridge holder outlet).
• Insert plastic clip to the cartridge holder inlet and outlet.
• Turn water on and check for any leakage.
Cartridge
Holder
Clip
• You can purchase the necessary filter cartridge at
the retailer where you purchased this refrigerator.
Filter
Make sure you buy the SAMSUNG filter cartridge
cartridge
(Replacement cartridge No : DA29-10105J) to ensure
Plastic line
the best performance.
(Provided)
• Water line must be connected to drinkable water only
• A compression fitting and nut kit is supplied with the unit and it is inside the fridge drawer.
• When pushing the Refrigerator back, make sure you don’t roll over the power cord or water line
(Icemaker supply line)
To use without the water filter section
Connecting to the water supply line
1.Cold Water line
2.Pipe Clamp.
3.Plastic line
4.Compression Nut
5.Compression
Sleeve
6.Packing Nut.
7. Shut Off Valve
• Shut off the main water supply line and turn the Ice maker
to the off position.
• Locate the nearest cold water drinking line.
CAUTION
The water line must be connected
1. First, shut off the main water supply line.
to the cold water pipe. If it is
2. Locate the nearest cold, drinking water line.
3. Follow the Water line Installation Instructions in the installation connected to the hot water
pipe, it may cause the purifier to
kit.
malfunction.
Close Main
Water pipe
Close Main
Water pipe
No gap
12_ setting up
DA68-01868N.indb
12
2010.4.14
1:26:52 PM
setting up your refrigerator
Connecting the water line to the refrigerator
Water Line
from unit
Remove
cap
Loosen a
01setting up
1. Remove the cap from water line on the unit and insert compression nut to the water line on the unit
after disassembling from provided water line.
2. Connect both water line from the unit and water line in the kit.
3. Tighten the compression nut onto the compression fitting. There should be no gaps between
(A, B & C )
4. Turn water on and check for any leakage.
No gap
Water Line
from unit
Only connect the water line to a drinkable water source.
If you have to repair or disassemble the water line, cut off 6.5mm of the plastic tubing to make sure
you get a snug, leak-free connection.
After the water supply has been installed check all the joints to ensure there are no leaks.
caution
• Samsung Warranty does not cover THE WATER LINE INSTALLATION.
• The cost of the water line installation is at the customers expense,
unless the retailer has covered this expense in the delivery charge.
• Please contact a Plumber or Authorized Installer for the installation if
needed.
• If Water leakage occurs due to improper installation, Please contact
installer.
setting up _13
DA68-01868N.indb
13
2010.4.14
1:26:53 PM
Setting up the refrigerator
Now that you have your new Refrigerator installed in place, you are ready to set up and enjoy the features
and functions of the appliance. By completing the following steps, your Refrigerator should be fully
operational.
1. Place the Refrigerator in an appropriate location with reasonable clearance between the wall and
the Refrigerator. Refer to installation instructions in this manual. (P8. Selecting the best location for
the Refrigerator)
2. Once the Refrigerator is plugged in, make sure the interior light comes on when you open the
doors.
3. Set the Temperature control to the coldest temperature and wait for an hour. The Freezer will get
slightly chilled and the motor will run smoothly.
4. After powering the Refrigerator, it will take a few hours to reach the appropriate temperature. You
can store food and drinks in the Refrigerator after the temperature is sufficiently cool.
Required Tools (Not provided)
Phillips Head Driver(+)
Flat Head Driver(-)
Socket Wrench
(10mm) (for bolts)
Hex Wrench (Ø5mm)
(for Mid hinge)
Hex wrench
(5/32 inch)
(for Mid hinge shaft)
Removing the refrigerator doors
Some installations require door/drawer removal to transport the Refrigerator to its final location.
Do not remove the door/drawer if it is not needed. Before removing the door/drawer make sure you read
following items.
Disconnect power to the Refrigerator before removing the door or drawer.
WARNING
• Be careful not to drop, damage or scratch the door/drawer while removing them.
• Be careful not to get injured while removing the door/drawer.
• Reattach the door/drawer properly to avoid:
- Moisture from air leakage.
- Uneven door alignment.
- Wasting energy due to improper door seal.
14_ setting up
DA68-01868N.indb
14
2010.4.14
1:26:53 PM
setting up your refrigerator
Disassembling the fridge door
Be careful not to drop and scratch the fridge door while removing the fridge door!
WARNING
01setting up
Socket wrench
Top Table
1. Remove the 3 screws
holding down the top table
and remove it.
2. Disconnect electric wire on
the top of the refrigerator.
3. Remove the 3 hex bolts
that hold the hinge on the
top of the refrigerator with
the 10mm socket wrench.
4. Remove the screw that
holds the ground wire with
a philips screwdriver(+).
5. Separate the hinge from
the electric wire and
ground wire as shown
above.
6. Lift the door straight up to
remove. Be careful not to
drop and scratch the doors
while removing them.
Disassembling the freezer door (DRAWER TYPE)
Middle Hinge
1. Separate the cap on the
middle hinge.
2. Remove the screw attached to the left and right middle
hinges with a philips screwdriver(+).
Remove the 2 hex head bolts attached to the left and right
middle hinges with an allen wrench(Ø5mm).
setting up _15
DA68-01868N.indb
15
2010.4.14
1:26:57 PM
3. After opening the Freezer
door, lift the drawer box.
4. Remove 4 hex head bolts
from both sides with a
socket wrench(10mm)
5. Lift up the freezer door
from the rails. Be careful
not to drop and scratch
the freezer door.
Disassembling the freezer door (swing type)
Middle Hinge
1. Separate the Cap on the
Middle Hinge.
2. Remove the screw attached to the left and right middle
hinges with a philips screwdriver(+).
Remove the 2 hex head bolts attached to the left and right
middle hinges with an allen wrench(Ø5mm).
3. Remove the Middle Hinge
connected to the Freezer.
4. Lift up the freezer door
from the hinge.
Be careful not to drop and
scratch the freezer door.
16_ setting up
DA68-01868N.indb
16
2010.4.14
1:27:1 PM
setting up your refrigerator
reassembling the fridge door
2. Insert and tighten the 2 hex
head bolts into the left and
right middle hinges with an
allen wrench(Ø5mm).
3. Replace the middle hinge
cap.
4. Place the hole in the
bottom of the left door
over the middle hinge.
5. Insert the left upper hinge
shaft into the hole on the
corner of the fridge door.
6. Insert the upper hinges
into the holes at the top of
the door.
Insert and tighten the 3
hex head bolts into the left
and right upper hinges with
a socket wrench(10mm).
7. Insert and tighten the
ground screw into the left
and right upper hinges with
a philips screwdriver(+).
8. Connect the electronic
wire on the top of the
refrigerator.
9. Position the top table in
place. Insert and tighten
the 3 screws into the
top table with a philips
screwdriver(+).
01setting up
1. Insert and tighten the
screw into the left and
right middle hinges with a
philips screwdriver(+).
setting up _17
DA68-01868N.indb
17
2010.4.14
1:27:5 PM
Reassembling the freezer door (DRAWER TYPE)
Slot
1. Pull out the rails to the full
length on each sidle of the
cabinet evenly.
2. Hang the freezer door
front onto open slot on the
sides.
3. With the 10mm wrench,
reattach 4 bolts to connect
the rail with the door.
4. Replace the drawer box.
Reassembling the freezer door (SWING TYPE)
1. Place the hole in the
bottom of the freezer door
over the right side low
hinge.
2. Replace the middle hinge connected to the freezer.
3. Insert and tighten the screw into the left and right middle
hinges with a philips screwdriver(+). Insert and tighten the 2
hex head bolts into the left and right middle hinges with an
allen wrench(Ø5mm).
4. Replace the cap on the middle hinge.
18_ setting up
DA68-01868N.indb
18
2010.4.14
1:27:8 PM
setting up your refrigerator
How to reverse the door (OPTION)
Unplug the refrigerator or disconnect the power.
01setting up
1. Remove 3 screws on the
hinge cover.
2. Disassemble the hinge
cover.
3. Disassemble 2 connectors.
(a housing and a reed
switch)
4. Disassemble ground wire
by removing 1 screw on
each side.
5. Disassemble the upper
hinge by removing 3 bolts
on each side with the
10mm wrench.
6. Remove each fridge doors
by lifting it up.
7. Disassemble middle hinge
cap.
1. Avoid the wire damage.
2. Fridge door is possible to tip
over at this time.
1. Possible to drop or scratch the
door at this time.
2. Middle hinge cap may come
off with the door.
Cap
Cover
8. Remove 1 screw and 2
bolts of each side (use
Ø5mm allen wrench).
1. At first, Remove left side
middle hinge and right side.
2. Be careful not to drop the
freezer door.
9. Remove the freezer door
by lifting it up.
10. Remove 2 screws.
11. Separate front leg Cover.
1. Possible to drop or scratch the
door at this time.
2. Low hinge cap may come off
with the door.
setting up _19
DA68-01868N.indb
19
2010.4.14
1:27:10 PM
Cap
12. Separate the Cap of the
front leg Cover. (pull out
inside of Cap)
13. Insert the Cap on the other
side of the front leg Cover.
14. Remove 2 bolts of each
hinge with the 10mm
wrench.
15. Place them in front of each
side.
16. Separate low hinge shaft
by using 5/32” wrench and
disassemble low hinge leg
by turning it colockwise,
and then assemble the low
hinge by turning it over.
17. Reattach the former right
hinge on the left side and
the former left hinge on the
right side by using 2bolts.
18. Separate stopper by
removing 1 screw on the
right lower side of freezer
and assemble the stopper
on the left side by reversing
it.
19. The middle hinge for
reversing a door can be
found in the fridge.
20. Change the middle hinges
assembled at refrigerator
to the middle hinges in the
fridge with handles.
21. Use the black hinge
cap of the middle hinge
assembled at refrigerator.
Then place it at the bottom
of the left middle hinge
supplied separately.
Use the Flat-blade screwdriver(-).
20_ setting up
DA68-01868N.indb
20
2010.4.14
1:27:14 PM
setting up your refrigerator
23. Replace the middle hinge connected to the freezer.
24. Insert and tighten the screw into the left and right middle
hinges with a philips screwdriver(+). Insert and tighten the 2
hex head bolts into the left and right middle hinges with an
allen wrench(Ø5mm).
25. Replace the cap on the middle hinge.
26. Place the hole in the
bottom of the left door
over the middle hinge.
27. Insert the left upper hinge
shaft into the hole on the
corner of the fridge door.
28. Insert the upper hinges
into the holes at the top of
the door.
Insert and tighten the 3
hex head bolts into the left
and right upper hinges with
a socket wrench(10mm).
29. Insert and tighten the
ground screw into the left
and right upper hinges with
a philips screwdriver(+).
30. Connect the electronic
wire on the top of the
refrigerator.
31. Position the top table in
place. Insert and tighten
the 3 screws into the
top table with a philips
screwdriver(+).
01setting up
22. Place the hole in the
bottom of the freezer door
over the low hinge.
setting up _21
DA68-01868N.indb
21
2010.4.14
1:27:16 PM
installation of the handles
REF handle installation
1.
2.
3.
Make sure the word “UP” on the rear of the handle is facing right side up.
a.Match the upper and lower handle Locking Tabs on the doors to the handles.
b.Fix the handles to the doors by sliding them down firmly until you hear a click sound.
Check the installation of the handles by pulling on them. If the handles have been inserted correctly,
they should not move. Ensure the two handles are horizontally aligned.
• If the REF handles are not aligned, repeat number 2. To align the doos, refer to the owner’s manual,
section ‘Leveling the refrigerator’
FRE handle installation (Drawer-Type)
1.
2.
3.
Make sure the word “The Upper Direction” on the side of the handle if facing up.
a.Align the handle with the mounting studs.
b.Push the handle onto the mounting studs until you hear a click.
Check the installation of the handle by pulling on it. If the handle has been inserted correctly, it
should not move.
• If the Freezer handle is not attached, repeat step 2.
• Swing-Type Model does not include FRE handle.
22_ setting up
DA68-01868N.indb
22
2010.4.14
1:27:19 PM
setting up your refrigerator
Adjusting the doors
For example, when the left side is lower than the right side, insert a flat-blade screwdriver into a notch on the
left control lever, and turn it clockwise or counter clockwise to level the door.
Turning it clockwise to raise the refrigerator and counterclockwise to lower it.
For the left side is higher, do it with right lever.
WARNING
01setting up
After putting the doors back on the Refrigerator, make sure the Refrigerator is level so that you can make
final adjustments.
If the Refrigerator is not level, it will not be possible to get the doors perfectly even.
Also it is possible to sweat in the refrigerator and ask more energy bills.
Both control levers must be surely touching the floor to avoid the possible personal injury or
property damage because of tipping.
When the left side is higher.
When the left side is lower.
Control Lever
Control Lever
Screwdriver(-)
Screwdriver(-)
setting up _23
DA68-01868N.indb
23
2010.4.14
1:27:19 PM
setting up your refrigerator
making minor adjustments between doors
Remember, a level Refrigerator is necessary for getting the doors perfectly even. If you need help, review the
previous section on leveling the Refrigerator.
When the left door
is lower than the
right door.
When the left door
is higher than the
right door.
Adjustment
part
Adjustment
part
1. Pull out the freezer drawer ( 1 ), then you can see the middle hinge ( 2 ) .
2. Insert the supplied hex wrench ( 3 ) into the shaft ( 4 ) of the middle hinge.
3. Please adjust the height by turning the hex wrench ( 3 ) clockwise (
) or counter-clockwise (
).
2
3
3
4
1
When you turn the hex wrench counter-clockwise (
Only the left-door height is adjustable for Swing-Type.
), the door will move up.
1. After adjusting the doors, please insert the supplied fastener ( 5 ) using Pliers ( 6 ) in the gap
between the hinge-grommet ( 7 ) and the middle hinge ( 8 ). The number of fasteners you’ll need to
insert depends on the gap.
2 fastener are enclosed with the refrigerator.
The thickness of each fastener is 1.0mm.
24_ setting up
DA68-01868N.indb
24
2010.4.14
1:27:24 PM
operating your samsung
refrigerator
02operating
Parts and features
Use this page to become more familiar with the parts and features of the Refrigerator.
Fridge
option
Freezer
Drawer Type
Swing Type
operating _25
DA68-01868N.indb
25
2010.4.14
1:27:26 PM
Using the control panel
1
2
4
3
5
6
Temperature & Function select / control panel
( 1 ) Ice Off Button
When the Ice Off button is pressed, ice will not be produced.
Use this function only when it is needed.
( 2 ) Power Freeze
Button
Press this button to freeze food quickly.
(Power Freeze will last 72 hours.)
( 3 ) Freezer Button
Freezer temperature set button.
Press this button to set the Freezer temp between -14ºC and -25ºC.
(At initial power on, the default setting is -19ºC.)
( 4 ) Fridge Button
Fridge temperature set button.
Press this button to set the Fridge temperature in 1ºC intervals between
7ºC and 1ºC.
(At initial power on, the default setting is 3ºC.)
( 5 ) Power Cool
Button
Press this button to cool the food in the fridge quickly.
(Power Cool will shut off when -4ºC is reached or after 2 and a half
hours.
( 6 ) E.Saver Button
Press the Energy Saver button for better energy efficiency. If water drops
appear on the doors, turn the Energy Saver function off.
26_ operating
DA68-01868N.indb
26
2010.4.14
1:27:26 PM
operating your samsung
refrigerator
Controlling the temperature
02operating
Setting the freezer temperature
If you want to control the freezer temperature, follow as below.
Press the Freezer Button (Refer the picture)
- The temperature can be set in 1ºC interval between -25ºC and -14ºC.
When selecting the temperature, the set temperature is
displayed initially for 5 seconds, then the actual temperature
is displayed.
(There may be slight difference between the set temperature
and displayed actual temperature, but it will be corrected to
the set temperature automatically.)
- The Freezer temperature will change depending on the number of door openings, quantity of
food, ambient temperature, etc.
- The temperature display will blink when freezer temperature increases due to frequent door
opening, keeping warm food, etc.
(Blinking will stop when the refrigerator reaches normal temperature. If for some reason it does not
stop after a long period of time, contact a Samsung service center.)
Setting the fridge temperature
If you want to control the fridge temperature, follow as below.
Press the Fridge Button (Refer the picture)
- The temperature can be set in 1ºC interval between 1ºC and 7ºC.
operating _27
DA68-01868N.indb
27
2010.4.14
1:27:27 PM
When selecting the fridge temperature, the set temperature is
displayed initially for 5 seconds, then the actual temperature is
displayed.
(There may be slight difference between the set temperature and
displayed actual temperature, but it will be corrected to the set
temperature automatically.)
- The Fridge temperature will change depending on the number of door openings, quantity of
food, ambient temperature, etc.
- Temperature of each shelve or container in the fridge may be different.
- The temperature display will blink when fridge temperature is increases due to frequent door
opening, keeping warm food, etc.
(Blinking will stop when the refrigerator reaches normal temperature. If for some reason it does not
stop after a long period of time, contact a Samsung service center.)
If you want to make ice faster (Controlling the Power
Freeze)
Press the Power Freeze Button. (Refer to the picture.)
- The power Freeze light on the display goes on (see the arrow mark) and this function begins to
operate regardless of the set freezer temperature.
Press the Power Freeze Button again to cancel this
function.
- The light goes off and it operates at the set freezer
temperature again.
- The Power Freeze function operates for 72 hours
regardless of the set temperature.
When you use this function, the energy consumption will increase. This function must be activated
before putting large amount of food stuff in the freezer compartment at least 48 hours before.
If you want to speed up the cooling in the Fridge (Power
Cool)
Press the Power Cool Button. (Refer to the picture.)
- The Power cool light on the display goes on (see
the arrow mark) and this function begins to operate
regardless of the set fridge temperature.
Press the Power Cool Button again to cancel this
function.
- The light goes off and it operates at the set fridge temperature again.
The Power Cool function operates for 2 and a half hours regardless of the set temperature.
28_ operating
DA68-01868N.indb
28
2010.4.14
1:27:27 PM
operating your samsung
refrigerator
Ice Maker Operation
02operating
The ice maker will produce 8 cubes per cycle - approximately 100~130 cubes in a 24-hour period,
depending on freezer compartment temperature, room temperature, number of door openings and other use
conditions.
Throw away the first few batches of ice to allow the water line to clear.
Be sure nothing interferes with the sweep of the feeler arm.
When the bin fills to the level of the feeler arm, the icemaker will stop
producing ice.
After the icemaker has been turned on again, there will be a time delay
before the icemaker resumes operation.
It is normal for several cubes to be joined together.
If ice is not used frequently, old ice cubes will become cloudy, taste stale
and shrink.
So if you don’t want to make ice, press the Ice Off button.
Saving Energy Tips
• Install the appliance in a cool, dry room with adequate ventilation.
Ensure that it is not exposed to direct sunlight and never put it near a direct source of heat (radiator,
for example).
• Never block any vents or grilles on the appliance.
• Allow warm food to cool down before placing it in the appliance.
• Put frozen food in the refrigerator to thaw.
You can then use the low temperatures of the frozen products to cool food in the refrigerator.
• Do not keep the door of the appliance open for too long when putting food in or taking food out.
The shorter time for which the door is open, the less ice will form in the freezer.
• Clean the rear of the refrigerator regularly. Dust increases energy consumption.
• Do not set temperature colder than necessary.
• Ensure sufficient air exhaust at the refrigerator base and at the back wall of the refrigerator. Do not
cover air vent openings.
• Allow clearance to the right, left, back and top when installing. This will help reduce power
consumption and keep your energy bills lower.
operating _29
DA68-01868N.indb
29
2010.4.14
1:27:28 PM
Storing food in the refrigerator
The Samsung Refrigerator has been designed to provide you with maximum space saving features and
functions. Here are some of the customized compartments we have created to keep your food fresher
longer. In order to further prevent odor from seeping into the ice compartment, stored food should be
wrapped securely and as airtight as possible.
Moving Tray
Bottle Bin
Can be used to store small dairy items like butter or margarine,
yogurt or cream cheese bricks
butter/cheese
Designed to handle large, bulky items such as gallons of milk
or other large bottles and containers.
Designed to be crack-resistant, the shelves can be used to
store all types of food and drinks. Circular marks on the glass
Fridge Shelves surface are a normal phenomenon and can usually be wiped
clean with a damp cloth.
Vegetable &
Fruit Drawers
Used for preserving the freshness of your stored vegetables
and fruits. This drawer has been specifically designed to
control the level of humidity within the compartment. Keep
vegetables and fruits separate when possible.
Do not place any large articles of food under the lamp in the Refrigerator. An air sensor is located
near the lamp and if the sensor is blocked, your Refrigerator may become too cold. Please place
Vegetable and Fruits in the Vegetable and Fruits Drawers to avoid freezing them. If the food in your
Refrigerator becomes frozen, please set the temperature higher.
Bottles should be stored tightly together so that they do not tip and fall out when the Refrigerator
door is opened.
Storing food in the freezer drawer
Best used to store meats or dry foods. Stored food should
be placed in a container or wrapped securely using plastic
wrap or other suitable wrapping materials.
Pull Out
Drawer
Can be used to store meat and dry foods.
Freezer Drawer Stored food should be placed in a container or wrapped
securely using plastic wrap or other suitable wrapping
Bin
materials.
If you plan to go away for a long time, empty the Refrigerator and turn it off. Wipe the excess
moisture from the inside of the appliance and leave the doors open. This helps keep odor and mold
from developing.
30_ operating
DA68-01868N.indb
30
2010.4.14
1:27:32 PM
operating your samsung
refrigerator
Removing and relocating the fridge accessories
02operating
1. Door Bins
To remove - Simply lift the bin up and pull straight out.
To replace - Slide it in above the desired location and push down until
it stops.
caution
Injury may occur if the door bins are not firmly inserted.
Do not allow children to play with bins. Sharp corners of the bins may
cause injury.
Empty the bin before adjusting it.
Dust removal method -Remove the guard and wash in water.
2. Fridge shelves
To remove - When pulling out the shelf, if it does not slide out easily,
lift it up slightly and pull out again.
To replace - When pushing in the shelf, if it does not slide in easily,
lift it up slightly and push in again.
caution
The Glass shelves are heavy.
Use special care when removing them.
3. Vegetable & Fruit Drawers
To remove - Pull the drawer out to full extension. Tilt up the front of the
drawer and pull straight out.
1
To replace - Insert the drawer into the frame rails and push back into
place.
The drawers need to be removed before the glass shelf above them
can be lifted out.
2
To get the best energy efficiency of this product, please leave all selves,
drawers and baskets on their original position like as illustration in page
25
operating _31
DA68-01868N.indb
31
2010.4.14
1:27:36 PM
Removing the freezer accessories
1. Pull Out Drawer
To remove - Pull the drawer out to full extension.
Tilt up rear of drawer and lift straight
out.
(Refer to picture 1 & 2)
1
1
2
2
3
3
Open the freezer door fully and remove the drawer.
To replace - Place the drawer onto the rails by tilting
it up. Lower the drawer into place until it
is horizontal and slide the drawer in.
(Refer to picture 3)
2. Freezer Drawer Bin
1
Swing-Type
To remove - Pull the drawer out fully. Tilt up the rear of the bin and lift it out
to remove.
To replace - Place the bin into the rail assembly.
2
When replacing, place the drawer bin holder into the hole of the rail
Drawer-Type
To remove the drawer - Pull the drawer out fully. Tilt up the rear
of the bin and lift it out to remove.
To relocate the drawer - Place the bin into the rail assembly.
Drawer
caution
WARNING
Do not allow children to play with the refrigerator, as they could
injure themselves or damage the refrigerator.
Do not sit on the Freezer door. The door may break. Do not
allow children to climb into the Freezer basket.
(RF67****)
If you remove the divider to clean the basket bin, you must reinstall the divider using 1 screw after
cleaning to prevent children from getting trapped inside the basket.
32_ operating
DA68-01868N.indb
32
2010.4.14
1:27:39 PM
operating your samsung refrigerator
Using the water dispenser (option)
You can easily obtain chilled water with the water dispenser without opening the refrigerator door. In addition,
you can save electricity by reducing the number of times the door is opened by more than 30%.
02operating
Overview
Press lever
Locking device
Water tank cap
Water tank
Water supply device
Filling the water tank
You can fill the water with the water tank sitting inside of the refrigerator or you can remove the
water tank to fill the water.
Method 1
After opening the cap, Fill the water.
If you pour the water too fast, water may overflow.
Method 2
1.Release the lock on the both side of the water tank to remove the lid
on the water tank.
2.Fill the water in the water tank.
caution
Do not put anything other than water in the water tank.
• Do not put anything other than water in the water tank.
• Fill with water up to 4.0L. If the water is filled up above the mark, it can spill out when the door
opens and closes.
• Push the cap until you hear a click.
Getting water from the dispenser
Place a glass underneath the water outlet and push it gently against the water
dispenser lever with your glass. Blue light will turn on when you push the lever.
• Make sure the glass is in line with the dispenser to prevent the water from
splashing out.
• Water dispenser may not be abailable depending on the model.
When the water dispenser is not in use, the following is recommended
Fix the water supply device tightly into the fixing hole.
The door will not be closed automatically when the water
supply device is pulled out for a long time because of cold
leaking.
operating _33
DA68-01868N.indb
33
2010.4.14
1:27:41 PM
Cleaning the refrigerator
Caring for your Samsung Refrigerator prolongs the life of your appliance and helps keep it odor and germ
free.
Cleaning the Interior
Clean the inside walls and accessories with a mild detergent
and then wipe dry with a soft cloth. You can remove the drawers
and shelves for a more thorough cleaning. Just make sure to dry
drawers and shelves before putting them back into place.
Cleaning the Exterior
Wipe the display panel with damp, clean, soft cloth. Do not spray
water directly on the surface of the Refrigerator.
The doors, handles and cabinet surfaces should be cleaned with
a mild detergent and then wiped dry with a soft cloth. To keep
your appliance looking its best, the exterior should be polished
once or twice a year.
caution
Display panel
Do not use Benzene, Thinner, car detergent, or Clorox for
cleaning. They may damage the surface of the appliance and
may cause fire.
Cleaning the Rubber door seals
If the rubber door seals are dirty, the doors may not close
properly, and the Refrigerator will not operate efficiently. Keep the
door seals free of grit or grime by cleaning the doors with a mild
detergent and damp cloth. Wipe dry with a clean, soft cloth.
Cleaning behind the Refrigerator
To keep cords and exposed parts free of dust and dirt
accumulation, vacuum behind the appliance once or twice a
year.
caution
Do not remove the back cover. Doing so may cause an electric
shock.
34_ operating
DA68-01868N.indb
34
2010.4.14
1:27:44 PM
operating your samsung
refrigerator
Replacing the interior light (Only available on some models)
Before changing any of interior lights, unplug the Refrigerator from the power supply.
If you are unsure about changing the lights after reading through these directions, contact a
Samsung service center for help.
Changing the Interior Light in the Refrigerator
1.
2.
3.
4.
02operating
caution
Unplug the power cord from the outlet.
Pull the shield down while pushing it backwards to remove it.
Disconnect the housing connector.
Change the LED or BULB lamp.
Shield
Changing the Interior Light in the Freezer Drawer
1. Unplug the power cord from the outlet.
2. Pull drawer out to full extension.
3. Pull the shield down while pushing it backwards to
remove it.
4. Disconnect the housing connector.
5. Change the LED or BULB lamp.
For LED lamp, please contact service eneineer to
replace it.
caution
Do not place your fingers inside the cover. The light bulb may be hot.
operating _35
DA68-01868N.indb
35
2010.4.14
1:27:45 PM
troubleshooting
PROBLEM
SOLUTION
The Refrigerator does
not work at all or it does
not chill sufficiently.
• Check that the power plug is properly connected.
• Is the temperature control on the display panel set to the correct
temperature?
Try setting it to a lower temperature.
• Is the refrigerator in direct sunlight or located near a heat source?
• Is the back of the refrigerator so close to the wall that air cannot keep
circulating? (Refer to page 10 for the best location.)
The food in the
Refrigerator is frozen.
• Is the temperature control on the display set to the correct
temperature?
Try setting it to a warmer temperature.
• Is the temperature in the room too low?
• Did you store the food too close to the air vent at the back of the
refrigerator? Move the food away from the air vent.
You hear unusual noise
or sounds.
• Check that the refrigerator is level and stable.
• Is the back of the refrigerator too close to the wall and therefore
keeping air from circulating?
• Was anything dropped behind or under the refrigerator?
• A “ticking” sound is heard from inside the refrigerator. It is normal and
occurs because various accessories are contracting or expanding
according to the temperature of the refrigerator interior.
The front corners and
horizontal hinged section
of the appliance are hot
and condensation is
occurring.
• Some heat is normal as anti-condensators are installed in the horizontal
hinged section of the refrigerator to prevent condensation.
• Is the refrigerator door ajar? Condensation can occur when you leave
the door open for a long time.
Ice Maker is not
producing ice.
• Did you wait for 12 hours after installation of the water supply line
before making ice?
• Is the water line connected and the shut-off valve opened?
• Did you manually stop the ice making function?
• Is the freezer temperature too warm? Try setting the freezer
temperature lower.
You hear water bubbling
in the Refrigerator.
• This is normal. The bubbling comes from the refrigerator coolant liquid
circulating through the refrigerator.
There is a bad smell in
the Refrigerator.
• Check for spoiled food.
• Foods with strong odors (for example, fish) should be tightly covered.
• Clean out your freezer periodically and throw away any spoiled or
suspicious food.
Frost forms on the walls
of the Freezer.
• Is the air vent blocked? Remove any obstructions so air can circulate
freely.
• Allow sufficient space between the foods stored for efficient air
circulation.
• Is the freezer drawer closed properly?
36_ troubleshooting
DA68-01868N.indb
36
2010.4.14
1:27:45 PM
memo
DA68-01868N.indb
37
2010.4.14
1:27:45 PM
Ambient Room Temperature Limits
This fridge/freezer is designed to operate in ambient temperatures specified by its temperature
class marked on the rating plate.
Class
Symbol
Ambient Temperature range(°C)
Extended Temperate
SN
+10 to +32
Temperate
N
+16 to +32
Subtropical
ST
+16 to +38
Tropical
T
+16 to +43
NOTE: Internal temperatures may be affected by such factors as the location of the fridge/
freezer, ambient temperature and the frequency with which you open the door. Adjust
the temperature as required to compensate for these factors.
English
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories
(e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their
working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal,
please separate these items from other types of waste and recycle them responsibly to promote the sustainable
reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government
office, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This
product and its electronic accessories should not be mixed with other commercial wastes for disposal.
In an effort to promote recycling this user manual is printed on recycled paper.
Code No. DA68-01868N REV(0.0)
DA68-01868N.indb
38
2010.4.14
1:27:45 PM
Download PDF