Samsung | CS21A730E3 | Samsung CS21A730E3 Operating instrustions

Color TELEVISION
CS21Z45Z3Q/CS21Z47Z3Q/
CS21A730E3/CS21Z43Z3Q/
CS21Z50Z3Q/CS21Z57Z3Q/
CS21Z55Z3Q/CS21Z58Z3Q
Connection Panel
Front (or Side) Panel
➢ The actual configuration of your TV may be different,
depending on your model.
Rear Panel
1Audio input
Owner’s Instructions
or
Before operating, please read this manual carefully,
and retain it for future reference.
Register your product at
www.samsung.com/global/register
☛ Whenever you connect an audio or video system to your
Control Panel (depending on the model)
➢ The product color and shape may vary depending on the
model.
Front (or Side) Panel
1 On-screen menu display
2 Volume adjustment
3 Channel selection
4 Remote control sensor
5 Indicator
6 Power on/off
2Video input
cable
television
network
television, ensure that all elements are switched off.
3Headphone input
☛ Please be sure to match the colour coded input terminals
and cable jacks.
Connecting to an Aerial or Cable Television Network
Connect the aerial or network input cable to the 1 (75 Ω
coaxial socket).
To view television channels correctly, a signal must be
received by the set from one of the sources: an outdoor
aerial, cable television network, or satellite network.
If you are using an indoor aerial, you may need to adjust it
when turning your television until you obtain a picture that is
both sharp and clear.
Connecting to the SCART Output
The SCART2 and SCART3 connectors are used for
equipment, such as a recording VCR or audio system.
Connecting to the SCART Input
The SCART2 and SCART3 connectors are used for
equipment, such as a VCR, DVD, decoder, satellite receiver,
video game device, or video disc player.
Connecting to the RCA Input
The 1 (AUDIO-L/R) and 2 (VIDEO) connectors are used
for equipment, such as a camcorder, video disc player, or
video game device.
Connecting Headphones
The 3 (headphone) jack is used for watching a television
programme without disturbing the other people in the room.
Prolonged use of headphones at a high volume may damage
your hearing.
➢ When both the front (or side) AV and rear connectors
are connected to external equipment, the front (or
side) AV receives priority.
 You can use the 3 buttons to switch the TV on when it is
in standby mode depending on the model.
 The 2 and 3 buttons also have the same function as
the ◄/►/▲/▼buttons on the remote control.
 If the remote control no longer works or you have
misplaced it, you can use the controls on the panel of the
television.
English - AA68-03971A-00Eng.indd 1
AA68-03971A-00
2008-04-15 오전 11:32:54
2
1
Remote Control (depending on the model)
4
➢ Operation of remote control may be affected by bright
5
artificial light near to the TV.
6
7
8
9
0
!
@
#
/
Used to increase or
decrease the volume.
MENU
Used to display the
on-screen menu or
return to the previous
menu.
▲/▼/◄/►
Used to control the
cursor in the menu.
S.MENU
Used to display the
sound menu.
TURBO
Used to select the turbo
sound option.
DUAL I-II
Used to select the
sound mode.
SOURCE
Used to display all of
the available video
sources.
INFO
Used to view the
channel information
and setting status you
selected.
PRE-CH
Used to switch
repeatedly between
the last two channels
displayed.
P /
Used to display the
next or previous stored
channel.
$ EXIT
Used to exit from any
display or return to
normal viewing.
% MUTE
Used to switch the
sound off temporarily.
To turn the sound back
on, press the MUTE,
, or
button.
^ ENTER
While using the
on-screen menus, press
the ENTER button to
activate (or change) a
particular item.
& S.MODE
Used to select the
sound effect.
* P.MODE
Used to select the
picture effect.
( TV
Used to return to the
TV mode when it is in
external input mode.
) EZ.VIEW
Used to display
Channel Grouping,
Channel Minimizer,
Channel Schedule,
Music Mode, Half Mute
menu.
Switching the Television On and Off
The mains lead is attached to the rear of the television.
1
Plug the mains lead into an appropriate socket.
➢ The main voltage is indicated on the rear of the
television and the frequency is 50 or 60Hz.
2
Press the “I” button (On/Off) on the front (or side) of the
television.
3
Press the POWER button on the remote control to
switch the television on. The programme that you were
watching last is re-selected automatically. If you have
not yet stored any channels, no clear picture appears.
Refer to “Channel - Auto Store” on page 3 or “Channel Manual Store” on page 4.
➢ If the television is initially powered on, several basic
customer settings proceed automatically. Refer to
“Setup - Plug & Play” on page 3.
4
To switch the television off, press the “I” button (On/Off)
on the front (or side) of the television.
Placing the Television in Standby Mode
The television can be placed in standby mode, in order to
reduce power consumption and wear of the cathode ray
tube. Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1
Press the POWER button on the remote control while
viewing.
The television is in standby mode.
2
To switch the television back on, simply press it again.
☛ Do not leave the television in standby mode for long
1 POWER
Used to switch the TV
on and off.
2 Numeric buttons
Used to select channels
directly.
3 -/-Used to select a
channel numbered ten
or over.
Press this button, then
“--” symbol is displayed.
Enter the two-digit
channel number.
Installing Batteries
Remove the cover. Install two AAA size
batteries, then replace the cover.
When the remote control does not
operate normally, check that the “+
” and “–” ends of the batteries are inserted correctly or the
batteries are drained.
Do not mix battery types, i.e. alkaline and manganese.
periods of time (when you are away on holiday, for
example). Turn the television off by pressing the “I”
button (On/Off) on the front (or side) of the television. It is
best to unplug the set from the mains and aerial.
➢
English - AA68-03971A-00Eng.indd 2
2008-04-15 오전 11:32:56
Viewing the Menus
3
1
Press the MENU button.
The main menu is displayed on the screen. Its left side
has five icons: Input, Picture, Sound, Channel, and
Setup.
2
Press the ▲ or ▼ button to select one of the icons.
Press the ENTER button to access the icon’s sub-menu.
3
Press the ▲ or ▼ button to move to items in the menu.
Press the ENTER button to enter items in the menu.
4
5
Press the ◄/►/▲/▼ button to change the selected
items. Press the MENU button to return to the previous
menu.
Press the EXIT button to exit from the menu.
➢
5 To search the channels, press
the ENTER button. To stop
the search, press the ENTER
button.
When the channel searching
has finished, the Clock Set
menu is displayed.
7
When the television is initially powered on, several basic
customer settings proceed automatically and subsequently.
The following settings are available.
If the television is in standby
mode, press the POWER
button on the remote control.
The Start Plug & Play
is displayed. To start Plug
& Play, press the ENTER
button. The Language menu
is displayed.
The Language menu
will automatically appear
after several seconds,
even if the ENTER button
is not pressed.
4 Press the▲ or ▼ button to
select your area. Press the
ENTER button.
6 Press the ◄ or ► button to
move to the hour or minute.
Set the hour or minute by
pressing the ▲ or ▼ button.
Setup - Plug & Play
1
Make sure that the antenna
is connected to the
television (refer to page 1).
Press the ENTER button.
The Area menu is displayed.
When you have finished,
press the MENU button.
The Enjoy your watching.
is displayed, and then the
channel which has been
stored will be activated.
Input - Source List
Plug & Play
Country
Belgie
Deutschland
España
France
Italia
Nederland
Move
Schweiz
Sverige
UK
E. Europe
Others
Enter
Source List
TV
 Source List
TV
You can switch between
EXT1
viewing signal from
EXT2
connected equipment, such
as a VCR, DVD, set-top
box, and the TV source
Move
Enter
Return
(broadcast or cable).
You can change the required external source simply
by pressing the SOURCE button on the remote
control. It might take a short period of time for
pictures to be switched. To return to the TV mode,
press the TV button on the remote control.
Skip
Plug & Play
Auto Store
➢
Start
Enter
Skip
Plug & Play
Auto Store
P 1 C--
102MHz
7 %
Stop
Enter
Skip
Plug & Play
Clock Set
00:00
Move
Adjust
Enter
Skip
Enjoy your watching.
OK
Plug & Play
Start Plug & Play.
Enter
OK
Exit
Plug & Play
Language
English
Русский
Re-setting the Plug & Play
Method
MENU  ▲/▼ (Setup) 
ENTER  ▲/▼ (Plug & Play)
 ENTER
Enter
Skip
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or
desired programme numbers. However you can sort
numbers manually and clear any channels you do not wish
to watch.
Channels are sorted and stored TV
Auto Store
in the order which reflects their
Belgie
Country
Deutschland
Search
position in the frequency range
España
France
(with lowest first and highest
Italia
last). The programme originally
Nederland
Schweiz
selected is then displayed.
▼
To stop the search
Move
Enter
Return
before it has finished,
Search
press the ENTER
P 1 C-- 102MHz
button.
7 %
➢
TV
Plug & Play
Language :
Time
Child Lock
Blue Screen
Melody
Music Mode
Move
Move
Channel - Auto Store
Setup
English
: On
: On
: Off
Enter
►
►
►
►
►
►
►
Return
When finished, the Sort menu
is displayed. To sort the stored
Enter
channels into the desired
numerical order, refer to “Channel - Sort”.
To exit without sorting, press the EXIT button.
Stop
Return
Channel - Sort
2
Select the appropriated language by pressing the
▲ or ▼ button. Press the ENTER button.
The Check antenna input.
Plug & Play
is displayed.
Check antenna input.
➢ If any language is not
OK
selected, the language
Enter
Skip
menu will disappear about
30 seconds later.
This operation allows you to
change the programme numbers
of stored channels. This
operation may be necessary
after using auto store.
TV
From
To
Store
:P 1
:P-:?
Sort
Move
Adjust
Return
◆ From: Channel number to
be changed.
◆ To: New channel number to be identified.
◆ Store: Confirmation the exchange of channel numbers.
continued...
English - AA68-03971A-00Eng.indd 3
2008-04-15 오전 11:32:57
Channel - Manual Store
Channel - Fine Tune
Setup - Time
Manual Store
TV
You can store channels,
Programme
: P 3
including those received via
Colour System: AUTO
►
cable networks. When storing
Sound System : BG
►
Search
: 46MHz
channels manually, you can
Channel
: C 4
choose:
Store
: ?
- Whether or not to store each of
the channels found
Move
Adjust
Return
- The programme number of
each stored channel which you wish to identify.
◆ Programme (Programme number to be assigned to a
channel)
◆ Colour System: AUTO/PAL/SECAM/NTSC4.43/
NTSC3.58
◆ Sound System: BG/DK/I/M
◆ Search (When you do not know the channel numbers):
The tuner scans the frequency range until the first
channel or the channel that you selected is received on
the screen.
◆ Channel (When you know the number of the channel to
be stored):
➢ You can also select the channel number directly by
pressing the numeric buttons (0-9).
◆ Store (When you store the channel and associated
programme number)
➢ If there is no sound or abnormal sound, re-select the
sound standard required.
Channel mode
◆ P (Programme mode): When completing tuning,
the broadcasting stations in your area have been
assigned to position numbers from P00 to P99. You
can select a channel by entering the position number
in this mode.
◆ C (Real channel mode): You can select a channel
by entering the assigned number for each air
broadcasting station in this mode.
◆ S (Cable channel mode): You can select a channel by
entering the assigned number for each cable channel
in this mode.
If the reception is clear, you do not have to fine-tune the
channel, as this is done automatically during the search and
store operation. If however the signal is weak or distorted,
you may have to fine-tune the channel manually.
Time
TV
Clock
00:00
Clock
You can set the television
Sleep Timer
: Off
clock so that the current
Scheduler
►
time is displayed when
pressing the INFO button
on the remote control. You
must also set the time if you
Move
Enter
Return
wish to use the automatic on
or off timers.
When pressing the “I” button (On/Off) on the front (or
side) of the television, the clock setting will be reset.
☛
Channel - Add/Delete
You can exclude channels you
have chosen from the channels
you scanned. When you scan
through the stored channels,
those you have chosen to
skip are not displayed. All of
the channels that you did not
specifically choose to skip are
displayed during scanning.
TV
▲
P
P
P
P
P
▼
Move
Method:
ENTER/► : Select Added or Deleted.
More
1: Added
2: Added
3: Added
4: Added
5: Added
More
Enter
Add/Delete
Return
Method:
◄/► : You can obtain a sharp
and clear picture and good
sound quality.
▲/▼  ENTER : You can reset
the setting.
MENU : You can memorise
adjusted picture or sound.
Fine Tune
P 1
0
Reset
Move
Adjust
➢
Store
Return
Sleep Timer
You can select a time period of between 30 and 180
minutes after which the TV automatically switches to
standby mode.
Channel - Channel Grouping
Channel Grouping
TV You can choose your category
Group Select : Sport ►
and find your desired channel
Set Channel Group
►
in a few seconds. You can save
a channel under the following
categories-Movie, Music, News,
Sports, and User.
Adjust
Return
Move
Method:
▲/▼ : Used to select a
Set Channel Group
Programme.
Movie Music News Sport User
P 1 ◄/► : Used to select the
P 2
P 3
desired channel group.
P 4
▲/▼ : Used to confirm the new PP 56
P 7
choice.
➢ You can press ▼ to select P 8Move Adjust Return
Channel Group(All, Movie,
Music, News, Sport, User)
directly.
➢ You can also use the EZ.VIEW button to use this
function.
Channel - LNA
When a weak broadcast signal
causes an unclear, noisy picture,
the “LNA” feature improves the
picture quality by setting to “
On”. If you experience noise
on a certain noise on a certain
channel, set the the “LNA” to “
On” or “Off” for this channel, to
obtain the optimum picture.
TV
Channel
Auto Store
Manual Store
Add/Delete
Fine Tune
Sort
Channel Grouping
LNA
: On
Move
Enter
►
►
►
►
►
►
►
Scheduler
Scheduler
TV
You can set the scheduler
P On Time Off TimeSet
1.---:--
--:--
No
to make the TV return to a
2.-- --:--
--:--
No
particular channel at a pre3.-- --:--
--:--
No
4.-- --:--
--:--
No
set time.
5.-- --:--
--:--
No
Upto 5 Programmes
On Timer Volume
10
can be scheduled at a
Move
Enter
Return
time.
If the Clock is not set in
the Time menu, a pop-up warning will flash if user
tries to enter Scheduler.
➢
➢
 On Timer Volume
The preferred volume can be set for when the timer
automatically turns on the TV.
Method:
◄/► : Move to the programme hour or minute.
▲/▼ : Used to set programme hour or minute.
▲/▼  ENTER : Set option of YES/ON to activate/deactive
the operation.
☛ You must set the clock first.
☛ Auto Power Off
When you set the timer “On”, the TV will eventually turn
off, if no controls are operated for 3 hours after the TV
was turned on by timer. This function is only available
in timer “On” mode and prevents overheating, which
may occur if a TV is on for too long.
Return
Method:
ENTER : On/Off
English - AA68-03971A-00Eng.indd 4
2008-04-15 오전 11:32:58
Setup - Child Lock
Picture - Mode
Child Lock
TV
This feature allows you to
Child Lock : On
►
prevent unauthorized users,
Programme
: P 1
such as children, from watching
Lock
: ?
unsuitable programmes by
muting out video and audio.
Child Lock cannot be released
using front (or side) panel
Move
Enter
Return
buttons. Only remote control can
release the Child Lock setting, so keep the remote control
away from children.
Child Lock: On/Off
If you want to unlock a channel, set to Off.
Programme: Channel number to be locked.
Lock: When press the ENTER button, the Locked is
displayed.
If any channel is locked, you can not access to
the Channel and Child Lock menu by using the
control buttons on the TV panel (the Not available is
displayed in the Child Lock menu). You can access
by using the remote control only.
Mode
Mode: Dynamic/ Standard/ TV
Mode
: Dynamic
►
Movie/Custom
Contrast
:90
Brightness :55
You can select the type
Sharpness :50
Colour
:45
of picture which best
Tint
:G 50 R 50
corresponds to your viewing
Colour Tone: Cool1
►
Reset
►
requirements.
Move
Adjust
Return
You can select these
options simply by pressing the P.MODE button on
the remote control.
➢
Setup Language / Blue Screen /
Melody / Music Mode
Setup
TV
Language
Plug & Play
►
It is variable depending on
Language
: English ►
the model. When you start
Time
►
Child Lock
►
using the television for the
Blue Screen : On
►
first time, you must select
Melody
: On
►
Music Mode
: Off
►
the language which will be
used for displaying menus
Move
Enter
Exit
and indications.
Blue Screen
If no signal is being received or the signal is very weak,
a blue screen automatically replaces the noisy picture
background. If you wish to continue viewing the poor
picture, you must set the Blue Screen to Off.
Melody
You can hear melody sound when the television is
powered on or off.
Music Mode
You can listen to the music/audio with no video or visual
distraction.
When Music Mode is selected, only music is audible
and no picture is visible. You can see music mode
icon ( ) on screen.
You can also use the EZ.VIEW button to use this
function.
Method
ENTER : On/Off
➢
Contrast/Brightness/Sharpness/Colour/
Tint(NTSC only)
The television has several settings which allow you to
control the picture quality.
Colour Tone:
Cool2/Cool1/Normal/Warm1/ Warm2
Reset
You can return to the factory defaults.
The reset function is set for each mode (Dynamic,
Standard, Movie, or Custom).
Picture - Digital NR
Digital NR
If the signal received by
the television is weak, you
can activate this feature
to reduce any static and
ghosting that may appear on
the screen.
➢
➢
TV
Picture
Mode
: Dynamic
Digital NR
: Off
Move
Enter
Exit
►
►
Sound Mode / Equalizer /
Auto Volume / Pseudo Stereo /
Turbo Plus / Half Mute
Sound
TV
◆ Mode: Standard/Music
Mode
: Standard ►
/Movie/Speech/Custom
Equalizer
►
Auto Volume
: Off
►
You can select the type of
Pseudo Stereo : Off
►
special sound effect to be
Turbo Plus
: Off
►
Half Mute
: On
►
used when watching a given
broadcast.
Move
Enter
Exit
➢ You can select these
options simply by pressing the S.MODE button on
the remote control.
◆ Equalizer
The television has several settings which allow you to
control the sound quality.
➢ If you make any changes to these settings, the
sound mode is automatically switched to Custom.
◆ Auto Volume
Each broadcasting station has its own signal
conditions,and so it is not easy to adjust the volume
every time the channel is changed. This feature lets you
automatically adjust the volume of the desired channel
by lowering the sound output when the modulation
signal is high or by raising the sound output when the
modulation signal is low.
◆ Pseudo Stereo
This feature converts a monaural sound signal into
two identical left and right channels. Once the Pseudo
Stereo is set to On or Off, these settings apply to the
sound effects such as Standard, Music, Movie, and
Speech.
◆ Turbo Plus
This feature suitably emphasizes both higher and lower
bands of sound (and includes other effects). You can
enjoy more magnificent and dynamic sound when
watching music, movie, or other channels.
➢ You can change the options simply by pressing the
TURBO button on the remote control.
◆ Half Mute
You can reduce volume to half and control volume even
in the mute mode.
➢ When you click the “mute” button once to activate
Half Mute see half mute ( ) on screen, twice for
Full Mute see full mute icon ( ) on screen.
➢You can also use the EZ.VIEW button to use this
function.
Method:
ENTER : On/Off
English - AA68-03971A-00Eng.indd 5
2008-04-15 오전 11:32:59
Selecting the Sound Mode
Important Warranty Information
Regarding Television Format Viewing
(depending on the model)
The DUAL I-II button displays/
controls the processing and
output of the audio signal. When
power is switched on, the mode is
automatically preset to either “Dual-I ” or “Stereo”, depending
on the current transmission.
◆ NICAM Stereo
Type of broadcast
On-screen indication
Regular broadcast
(Standard audio)
Mono
(Normal use)
Regular +
NICAM Mono
Mono
NICAM
↔
Mono
(Normal)
Easy View - Channel Minimizer
NICAM Stereo
Stereo
NICAM
↔
Mono
(Normal)
Easy view is a combination of
Video&Audio features that make
TV viewing much easier.
NICAM Dual-I/II
Channel minimizer is a feature
that offers freedom in the
number of channels that you can
watch at any time!
To add a Channel
You can go to your favorite
channel you wish to add to
Channel Minimizer.
◆ A2 Stereo
Easy View
Channel Grouping
Channel Minimizer
Channel Scheduler
Music Mode
Half Mute
Move
Enter
►
►
►
►
►
Exit
Scroll
Select
▼ Delete
P14
P20
Scroll
P35
Select
▼ Delete
Method:
▲ : Add the present channel to Channel Minimizer.
➢ Repeat the process to add upto six channels.
Dual-I
Dual-II
Mono
NICAM ↔ NICAM ↔ (Normal)
To delete a Channel
You can delete the channel in Channel Minimizer by pressing
▼ button.
➢ You can display Channel Minimizer menu by pressing
◄/►/▲ button.
➢ You cannot display Channel Minimizer menu by
pressing ▲ button when six channels are added.
➢ C hannel Minimizer is always activated hence you don’t
need to press Easy view button.
Type of broadcast
On-screen indication
Regular broadcast
(Standard audio)
Mono
(Normal)
Bilingual or Dual-I/II
Stereo
➢
Dual-I
Stereo
↔
↔
Dual-II
Mono
(Forced mono)
◆ If the receiving conditions deteriorate, listening will
be easier if the mode is set to the Mono.
◆ If the stereo signal is weak and an automatic
switching occurs, then switch to the Mono.
◆ When receiving a mono sound in the AV mode,
connect to the “AUDIO-L” input connector on the
panel (front or side). If the mono sound comes out
only from left speaker, press the DUAL I-II button.
Standard screen format televisions (4:3, the aspect ratio of
the screen width to height) are primarily designed to view
standard format full-motion video.
The images displayed on them should primarily be in the
standard 4:3 ratio format and constantly moving. Displaying
stationary graphics and images on screen, such as the
dark top and bottom letterbox bars (wide screen pictures),
should be limited to no more than 15% of the total television
viewing per week.
Wide screen format televisions (16:9, the aspect ratio of
the screen width to height) are primarily designed to view
wide screen format full-motion video. The images displayed
on them should primarily be in the wide screen 16:9 ratio
format, or expanded to fill the screen if your model offers
this feature, and constantly moving. Displaying stationary
graphics and images on screen, such as the dark sidebars on non-expanded standard format television video and
programming, should be limited to no more than 15% of the
total television viewing per week.
Additionally, viewing other stationary images and text such
as stock market reports, video game displays, station logos,
web sites or computer graphics and patterns, should be
limited as described above for all televisions. Displaying
any stationary images that exceed the above guidelines
can cause uneven aging of picture tubes (CRTs) that
leave subtle, but permanent burned-in ghost images in the
television picture. To avoid this, vary the programming and
images, and primarily display full screen moving images,
not stationary patterns or dark bars.
On television models that offer picture sizing features, use
these controls to view the different formats as a full screen
picture.
Be careful in the selection and duration of television formats
used for viewing. Uneven CRT aging as a result of format
selection and use, as well as other burned-in images, is not
covered by your Samsung limited warranty.
English - AA68-03971A-00Eng.indd 6
2008-04-15 오전 11:33:00
2
1
2
Teletext Feature (depending on the model)
Most television stations provide written information services
via teletext. The index page of the teletext service gives you
information on how to use the service. In addition, you can
select various options to suit your requirements by using the
remote control buttons.
For teletext information to be displayed correctly, channel
reception must be stable. Otherwise, information may be
missing or some pages may not be displayed.
☛
1
1
2
3
4
5
6
7
8
9
0
!
@
(hold)
Used to hold the display on a given page if the selected
page is linked with several secondary pages which
follow on automatically. To resume, press it again.
(index)
Used to display the index (contents) page at any time
while you are viewing teletext.
2
(sub-page)
Used to display2 the available
1 sub-page.
(size)
1 the double-size letters in the upper
Press to display
half of the screen. For lower half of the screen, press it
again. To display normal screen, press it once again.
2
(teletext on­­/mix)
Press to activate teletext mode after selecting the
1 to
channel providing 2the teletext service.
2 Press it again
overlap the teletext with the current broadcasting screen.
1
1
(mode)
Press to select the teletext mode (LIST/FLOF). If you
press it in the LIST mode, it switches into the List save
2 mode, you can save teletext page
mode. 2In the List save
into list using the
(store) button.
1
1
(reveal)
Used to display the hidden text (answers to quiz games,
for example). To display normal screen, press it again.
(page up)
2
Used to display the next teletext page.
(page down)
1 page.
Used to display the previous teletext
(cancel)
Used to display the broadcast when searching for a page.
Coloured buttons (red/green/yellow/blue)
If the FASTEXT system is used by a broadcasting
company, the different topics covered on a teletext page
are colour-coded and can be selected by pressing the
coloured buttons. Press one of them corresponding
to the required. The page is displayed with other
coloured information that can be selected in the same
way. To display the previous or next page, press the
corresponding coloured button.
(store)
Used to store the teletext pages.
Troubleshooting
Before contacting the Samsung after-sales service, perform
the following simple checks. If you cannot solve the problem
using the instructions below, note the model and serial
number of the television and contact your local dealer.
No sound or picture
 Check that the mains lead has been connected to a wall
socket.
 Check that you have pressed the “I” button (On/Off) and
the POWER button.
 Check the picture contrast and brightness settings.
 Check the volume.
Normal picture but no sound
 Check the volume.
 Check whether the volume MUTE button on the remote
control has been pressed.
No picture or black and white picture
 Adjust the colour settings.
 Check that the broadcast system selected is correct.
Sound and picture interference
 Try to identify the electrical appliance that is affecting the
television, then move it further away.
 Plug the television into a different mains socket.
Blurred or snowy picture, distorted sound
 Check the direction, location and connections of your
aerial.
This interference often occurs due to the use of an
indoor aerial.
Remote control malfunctions
 Replace the remote control batteries.
 Clean the upper edge of the remote control (transmission
window).
 Check that the “+” and “-” ends of the batteries are
inserted correctly.
 Check that the batteries are drained.
2
1
English - AA68-03971A-00Eng.indd 7
2008-04-15 오전 11:33:02
OSD Map
Input
✽ : It is variable depending on the model.
- Source List - TV / EXT1 / EXT2
Picture
- Mode
-
- Digital NR
-
Sound
-
-
-
-
-
-
Mode
Equalizer
Auto Volume
Pseudo Stereo
Turbo Plus
Half Mute
Model
Dynamic / Standard / Movie / Custom
Contrast
Brightness
Sharpness
Colour
Tint (NTSC only)
Colour Tone - Cool2 / Cool1 / Normal / Warm1 / Warm2
Reset
Off / On
Screen aspect ratio
Screen size, inches
Full screen diagonal
size (cm)
Usable screen area
diagonal size (cm)
Supported color modes
Supported audio modes
H
- Standard / Music / Movie / Speech / Custom
-
-
-
-
Off / On
Off / On
Off / On
Off / On
Channel
- Auto Store
- Country✽ -
- Search
- Manual Store
- Programme
- Colour System ✽ -
- Sound System ✽ -
- Search
- Channel
- Store
- Add/Delete
- Fine Tune
- Sort
- Channel Grouping - Group Select
- Set Channel Group
-LNA
- Off / On
Setup
- Plug & Play
-Language ✽
- Time
- Child Lock
- Blue Screen
- Melody
- Music Mode
Specifications
Dimensions
(mm)
Belgie / Deutschland / España / France / Italia / Nederland / Schweiz / Sverige / UK / E.Europe / Others
AUTO / PAL / SECAM / NTSC4.43 / NTSC3.58
BG / DK / I / M
- Clock
- Sleep Timer
- Scheduler
- Child Lock
- Programme
-Lock
- Off / On
- Off / On
- Off / On
W
D
Weight (kg)
Mono/Stereo
Integrated speaker
power
Installed socket types
SCART
S-VIDEO / RCA (input)
RCA (output)
Earphone / headphone
Optional accessories
Remote control
Batteries
User Manual
1 CS21Z45Z3Q
2 CS21Z47Z3Q
3 CS21A730E3
4 CS21Z43Z3Q
4:3
21
55
1 CS21Z50Z3Q
2 CS21Z57Z3Q
3 CS21Z55Z3Q
4 CS21Z58Z3Q
4:3
21
55
51
51
PAL/SECAM
(NT3.58, NT4.43)
B/G,DK,I,M
1 472
2 474
3 463
4 472
1 604
2 604
3 612
4 604
1 350
2 350
3 337.3
4 361
1 19.9
2 19.8
3 19.8
4 19.9
STEREO
PAL/SECAM
(NT3.58, NT4.43)
B/G,DK,I,M
1 473
2 473
3 463
4 465
1 604
2 604
3 770
4 585
1 340
2 340
3 324
4 329
1 20.1
2 20.5
3 18.9
4 19.4
STEREO
10 W X 2
10 W X 2
O
X/O
X
O
O
X/O
X
O
O
O
O
O
O
O
➢
For the power supply and Power Consumption, refer to the label
attached to the product.
➢
Should be used for its intended purpose under normal
conditions. Life time:7 years
English - AA68-03971A-00Eng.indd 8
2008-04-15 오전 11:33:03
Download PDF

advertising