Samsung | WW90J6410CW | Samsung Стиральная машина WW90J6410CW с EcoBubble, 9 кг Operating instrustions

Washing Machine
User manual
WW9*J6******
Untitled-6 1
3/31/2017 12:16:26 PM
Contents
Safety information
4
Contents
What you need to know about the safety instructions
Important safety symbols
Important safety precautions
Critical installation warnings
Installation cautions
Critical usage warnings
Usage cautions
Critical cleaning warnings
Instructions about the WEEE
4
4
5
6
8
8
10
13
14
Installation
15
What’s included
Installation requirements
Step-by-step installation
15
17
19
Before you start
26
Initial settings
Laundry guidelines
Detergent drawer guidelines
26
26
29
Operations
32
Control panel
32
Simple steps to start
33
Cycle overview
34
Settings38
Maintenance
39
Eco drum clean
39
Smart Check
40
Emergency drain
41
Cleaning42
Recovery from freezing
45
Care against an extended time of disuse
45
2 English
Untitled-6 2
3/31/2017 12:16:26 PM
Troubleshooting
46
Checkpoints46
Information codes
50
52
Fabric care chart
Protecting the environment
Specification sheet
Information of main washing cycles
52
53
54
56
English 3 Untitled-6 3
3/31/2017 12:16:26 PM
Contents
Specifications
Safety information
Congratulations on your new Samsung washing machine. This manual contains important
information on the installation, use and care of your appliance. Please take some time to
read this manual to take full advantage of your washing machine’s many benefits and
features.
What you need to know about the safety instructions
Safety information
Please read this manual thoroughly to ensure that you know how to safely and efficiently
operate the extensive features and functions of your new appliance. Please store the
manual in a safe location close to the appliance for future reference. Use this appliance
only for its intended purpose as described in this instruction manual.
Warnings and Important Safety Instructions in this manual do not cover all possible
conditions and situations that may occur. It is your responsibility to use common sense,
caution and care when installing, maintaining and operating your washing machine.
Because the following operating instructions cover various models, the characteristics of
your washing machine may differ slightly from those described in this manual and not
all warning signs may be applicable. If you have any questions or concerns, contact your
nearest service centre or find help and information online at www.samsung.com.
Important safety symbols
What the icons and signs in this user manual mean:
WARNING
Hazards or unsafe practices that may result in severe personal injury, death and/or
property damage.
CAUTION
Hazards or unsafe practices that may result in personal injury and/or property damage.
NOTE
Indicates that a risk of personal injury or material damage exists.
4 English
Untitled-6 4
3/31/2017 12:16:27 PM
These warning signs are here to prevent injury to yourself and others.
Please follow them explicitly.
After reading this manual, store it in a safe place for future reference.
Read all instructions before using the appliance.
Important safety precautions
WARNING
To reduce the risk of fire, electric shock, or injury to persons
when using your appliance, follow basic precautions, including the
following:
1.This appliance is not to be used by persons (including children)
with reduced physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
2.For use in Europe: This appliance can be used by children aged
from 8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand
the hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children
without supervision.
3.Children should be supervised to ensure that they do not play with
the appliance.
English 5 Untitled-6 5
3/31/2017 12:16:27 PM
Safety information
As with any equipment that uses electricity and moving parts, potential hazards exist.
To safely operate this appliance, familiarize yourself with its operation and exercise care
when using it.
Safety information
4.If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
Safety information
5.The new hose-sets supplied with the appliance are to be used and
old hose-sets should not be reused.
6.For appliances with ventilation openings in the base, a carpet must
not obstruct the openings.
7.For use in Europe: Children of less than 3 years should be kept
away unless continuously supervised.
8.CAUTION: In order to avoid a hazard due to inadvertent resetting
of the thermal cut-out, this appliance must not be supplied through
an external switching device, such as a timer, or connected to a
circuit that is regularly switched on and off by the utility.
Critical installation warnings
WARNING
The installation of this appliance must be performed by a qualified technician or service
company.
• Failure to do so may result in electric shock, fire, an explosion, problems with the
product, or injury.
The appliance is heavy, therefore take care when lifting it.
Plug the power cord into a wall socket that meets local electrical specifications. Use the
socket for this appliance only, and do not use an extension cord.
• Sharing a wall socket with other appliances using a power strip or extending the power
cord may result in electric shock or fire.
• Ensure that the power voltage, frequency, and current are the same as those of the
product specifications. Failure to do so may result in electric shock or fire. Plug the
power plug into the wall socket firmly.
Remove all foreign substances such as dust or water from the power plug terminals and
contact points using a dry cloth on a regular basis.
• Unplug the power plug and clean it with a dry cloth.
6 English
Untitled-6 6
3/31/2017 12:16:27 PM
• Failure to do so may result in electric shock or fire.
Plug the power plug into the wall socket so that the cord is running towards the floor.
• If you plug the power plug into the socket in the opposite direction, the electric wires
within the cable may be damaged and this may result in electric shock or fire.
Keep all packaging materials out of the reach of children as these may be dangerous.
When the appliance, power plug or power cord is damaged, contact your nearest service
centre.
This appliance must be properly grounded.
Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.
• This may result in electric shock, fire, an explosion, or problems with the product.
• Never plug the power cord into a socket that is not grounded correctly and make sure
that it is in accordance with local and national regulations.
Do not install this appliance near a heater or any inflammable material.
Do not install this appliance in a humid, oily or dusty location, or in a location exposed to
direct sunlight or water (rain drops).
Do not install this appliance in a location exposed to low temperatures.
• Frost may cause the tubes to burst.
Do not install this appliance in a location where gas may leak.
• This may result in electric shock or fire.
Do not use an electric transformer.
• This may result in electric shock or fire.
Do not use a damaged power plug, damaged power cord, or loose wall socket.
• This may result in electric shock or fire.
Do not pull or excessively bend the power cord.
Do not twist or tie the power cord.
Do not hook the power cord over a metal object, place a heavy object on the power cord,
insert the power cord between objects, or push the power cord into the space behind the
appliance.
• This may result in electric shock or fire.
Do not pull the power cord when unplugging the power plug.
• Unplug the power plug by holding the plug.
• Failure to do so may result in electric shock or fire.
English 7 Untitled-6 7
3/31/2017 12:16:27 PM
Safety information
• If a child places a bag over its head, it may suffocate.
Safety information
This appliance should be positioned so that the power plug, the water supply taps, and the
drain pipes are accessible.
Installation cautions
Safety information
CAUTION
This appliance should be positioned in such a way that the power plug is easily accessible.
• Failure to do so may result in electric shock or fire due to electric leakage.
Install your appliance on a solid, level floor that can support its weight.
• Failure to do so may result in abnormal vibrations, movement, noise, or problems with
the product.
Critical usage warnings
WARNING
If the appliance is flooded, turn off the water & power supplies immediately and contact
your nearest service centre.
• Do not touch the power plug with wet hands.
• Failure to do so may result in electric shock.
If the appliance generates a strange noise, a burning smell, or smoke, unplug the power
plug immediately and contact your nearest service centre.
• Failure to do so may result in electric shock or fire.
In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate immediately
without touching the power plug. Do not touch the appliance or power cord.
• Do not use a ventilating fan.
• A spark may result in an explosion or fire.
Do not let children play in or on the washing machine. In addition, when disposing of the
appliance, remove the washing machine door lever.
• If trapped inside the product, children may suffocate to death.
Make sure to remove the packaging (sponge, styrofoam) attached to the bottom of the
washing machine before using it.
Do not wash items contaminated with gasoline, kerosene, benzene, paint thinner, alcohol
or other inflammable or explosive substances.
• This may result in electric shock, fire, or an explosion.
8 English
Untitled-6 8
3/31/2017 12:16:27 PM
Do not open the washing machine door by force while it is operating (high-temperature
washing/drying/spinning).
• Water flowing out of the washing machine may result in burns or cause the floor to be
slippery. This may result in injury.
• Opening the door by force may result in damage to the product or injury.
• This may result in injury.
Do not touch the power plug with wet hands.
• This may result in electric shock.
Do not turn the appliance off by unplugging the power plug while an operation is in
progress.
• Plugging the power plug into the wall socket again may cause a spark and result in
electric shock or fire.
Do not let children or the infirm use this washing machine without proper supervision. Do
not let children climb in or onto the appliance.
• This may result in electric shock, burns or injury.
Do not insert your hand or a metal object under the washing machine while it is operating.
• This may result in injury.
Do not unplug the appliance by pulling the power cord. Always grip the plug firmly and
pull it straight out of the outlet.
• Damage to the power cord may cause a short-circuit, fire and/or electric shock.
Do not attempt to repair, disassemble, or modify the appliance yourself.
• Do not use a fuse (such as copper, steel wire, etc.) other than a standard fuse.
• When the appliance needs to be repaired or reinstalled, contact your nearest service
centre.
• Failure to do so may result in electric shock, fire, problems with the product, or injury.
If the water supply hose comes loose from the water tap and floods the appliance, unplug
the power plug.
• Failure to do so may result in electric shock or fire.
Unplug the power plug when the appliance is not being used for long periods of time or
during a thunder or lightning storm.
• Failure to do so may result in electric shock or fire.
If any foreign substance enters into the appliance, unplug the power plug and contact
your nearest Samsung Customer Service.
• This may result in electric shock or fire.
English 9 Untitled-6 9
3/31/2017 12:16:27 PM
Safety information
Do not insert your hand under the washing machine while an operation is in progress.
Safety information
Do not let children (or pets) play in or on your washing machine. The washing machine
door does not open easily from the inside and children may be seriously injured if trapped
inside.
Usage cautions
Safety information
CAUTION
When the washing machine is contaminated by a foreign substance such as detergent,
dirt, food waste, etc., unplug the power plug and clean the washing machine using a damp,
soft cloth.
• Failure to do so may result in discolouration, deformation, damage, or rust.
The front glass may be broken by a strong impact. Take care when using the washing
machine.
• If the glass is broken, it may result in injury.
After a water supply failure or when reconnecting the water supply hose, open the water
tap slowly.
Open the water tap slowly after a long period of non-use.
• The air pressure in the water supply hose or the water pipe may damage a product
part or result in a water leak.
If a draining error occurs during an operation, check if there is a draining problem.
• If the washing machine is used when it is flooded because of a draining problem, it
may result in electric shock or fire.
Insert the laundry into the washing machine completely so that the laundry does not get
caught in the door.
• If laundry gets caught in the door, it may result in damage to the laundry or the
washing machine, or result in a water leak.
Turn the water supply off when the washing machine is not being used.
• Ensure that the screws on the water supply hose connector are properly tightened.
Ensure that the rubber seal and front door glass are not contaminated by a foreign
substance (e.g. waste, thread, hair, etc.).
• If a foreign substance is caught in the door or the door is not completely closed, it may
cause a water leak.
Open the water tap and check if the water supply hose connector is firmly tightened and
that there is no water leak before using the product.
10 English
Untitled-6 10
3/31/2017 12:16:27 PM
• If the screws on the water supply hose connector are loose, it may result in a water
leak.
The product you have purchased is designed for domestic use only.
Do not stand on the appliance or place objects (such as laundry, lighted candles, lighted
cigarettes, dishes, chemicals, metal objects, etc.) on the appliance.
• This may result in electric shock, fire, problems with the product, or injury.
Do not spray volatile material such as insecticide onto the surface of the appliance.
• As well as being harmful to humans, this may result in electric shock, fire or problems
with the product.
Do not place objects that generate electromagnetic fields near the washing machine.
• This may result in injury due to a malfunction.
Water drained during a high-temperature wash or drying cycle is hot. Do not touch the
water.
• This may result in burns or injury.
Do not wash, spin, or dry water-proof seats, mats, or clothing (*) unless your appliance has
a special cycle for washing these items.
(*): Woollen bedding, rain covers, fishing vests, ski pants, sleeping bags, diaper covers,
sweat suits, and bicycle, motor cycle and car covers, etc.
• Do not wash thick or hard mats even if the washing machine mark is on the care label.
This may result in injury or damage to the washing machine, walls, floor, or clothing
due to abnormal vibrations.
• Do not wash throw rugs or doormats with rubber backing. The rubber backing may
come off and stick to inside the drum, and this may result in malfunction such as a
drainage error.
Do not operate the washing machine when the detergent drawer is removed.
• This may result in electric shock or injury due to a water leak.
Do not touch the insides of the drum during or just after drying as it is hot.
• This may result in burns.
Do not insert your hand into the detergent drawer.
• This may result in injury as your hand may be caught by the detergent input device.
English 11 Untitled-6 11
3/31/2017 12:16:27 PM
Safety information
Using the product for business purposes qualifies as a product misuse. In this case, the
product will not be covered by the standard warranty provided by Samsung and no
responsibility can be attributed to Samsung for malfunctions or damages resulting from
such misuse.
Safety information
• The liquid detergent guide (applicable models only) is not used for powder detergent.
Remove the guide when using powder detergent.
Do not place any objects (such as shoes, food waste, animals) other than laundry into the
washing machine.
Safety information
• This may result in damage to the washing machine, or injury and death in the case of
pets due to the abnormal vibrations.
Do not press the buttons using sharp objects such as pins, knifes, fingernails, etc.
• This may result in electric shock or injury.
Do not wash laundry contaminated by oils, creams or lotions usually found in skincare
shops or massage clinics.
• This may cause the rubber seal to become deformed and result in a water leak.
Do not leave metal objects such as safety pins, hair pins or bleach in the drum for long
periods of time.
• This may cause the drum to rust.
• If rust starts appearing on the surface of the drum, apply a (neutral) cleansing agent to
the surface and use a sponge to clean it. Never use a metal brush.
Do not use dry cleaning detergent directly and do not wash, rinse, or spin laundry
contaminated by dry cleaning detergent.
• This may result in spontaneous combustion or ignition due to the heat from the
oxidation of the oil.
Do not use water from water cooling/heating devices.
• This may result in problems with the washing machine.
Do not use natural hand-washing soap for the washing machine.
• If it hardens and accumulates inside the washing machine, it may result in problems
with the product, discolouration, rust, or bad odours.
Place socks and brassieres in a washing net and wash them with the other laundry.
Do not wash large laundry items such as bedding in the washing net.
• Failure to do so may result in injury due to abnormal vibrations.
Do not use hardened detergent.
• If it accumulates inside the washing machine, it may result in a water leak.
Make sure that the pockets of all the clothing items to be washed are empty.
• Hard, sharp objects such as coins, safety pins, nails, screws, or stones can cause
extensive damage to the appliance.
Do not wash clothing with large buckles, buttons or other heavy metal objects.
12 English
Untitled-6 12
3/31/2017 12:16:27 PM
Sort the laundry by colour on the basis of its colorfastness and select the recommended
cycle, water temperature and additional functions.
• This may result in discolouration or fabric damage.
Take care that children’s fingers are not caught in the door when you close it.
• Failure to do so may result in injury.
Safety information
Critical cleaning warnings
WARNING
Do not clean the appliance by spraying water directly onto it.
Do not use a strong acidic cleaning agent.
Do not use benzene, thinner or alcohol to clean the appliance.
• This may result in discolouration, deformation, damage, electric shock or fire.
Before cleaning or performing maintenance, unplug the appliance from the wall socket.
• Failure to do so may result in electric shock or fire.
English 13 Untitled-6 13
3/31/2017 12:16:27 PM
Safety information
Instructions about the WEEE
Correct Disposal of This Product (Waste Electrical & Electronic
Equipment)
(Applicable in countries with separate collection systems)
Safety information
This marking on the product, accessories or literature indicates
that the product and its electronic accessories (e.g. charger,
headset, USB cable) should not be disposed of with other
household waste at the end of their working life. To prevent
possible harm to the environment or human health from
uncontrolled waste disposal, please separate these items from
other types of waste and recycle them responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they
purchased this product, or their local government office, for details
of where and how they can take these items for environmentally
safe recycling.
Business users should contact their supplier and check the terms
and conditions of the purchase contract. This product and its
electronic accessories should not be mixed with other commercial
wastes for disposal.
14 English
Untitled-6 14
3/31/2017 12:16:27 PM
Installation
Follow these instructions carefully to ensure proper installation of the washing machine
and to prevent accidents when doing laundry.
What’s included
Make sure all the parts are included in the product package. If you have a problem with
the washing machine or the parts, contact a local Samsung customer centre or the retailer.
01
02
09
Installation
03
10
11
04
05
12
06
07
08
01Release lever
02Detergent drawer
03Control panel
04Door
05Drum
06Pump filter
07Emergency drain tube
08Filter cover
09Worktop
10Power plug
11Drain hose
12Levelling feet
English 15 Untitled-6 15
3/31/2017 12:16:27 PM
Installation
Installation
Spanner
Bolt caps
Hose guide
Cold water hose
Hot water hose
Liquid detergent guide
NOTE
• Bolt caps: The provided number (3 to 6) of bolt caps depends on the model.
• Hot water hose: Applicable models only.
• Liquid detergent guide: Applicable models only.
16 English
Untitled-6 16
3/31/2017 12:16:28 PM
Installation requirements
Water supply
• AC 220-240 V / 50 Hz fuse or circuit
breaker is required.
• Use an individual branch circuit specific
to the washing machine.
A proper water pressure for this washing
machine is between 50 kPa and 800
kPa. Water pressure less than 50 kPa
may cause the water valve not to close
completely. Or, it may take longer to fill
the drum, causing the washing machine to
turn off. Water taps must be within 120
cm from the rear of the washing machine
so that the provided inlet hoses reach the
washing machine.
To ensure proper grounding, the washing
machine comes with a power cord
featuring a three-prong grounding plug for
use in a properly installed and grounded
outlet.
Check with a qualified electrician or
service person if you are not sure about
the grounding.
Do not modify the provided plug. If it does
not fit the outlet, call a qualified electrician
to install a proper outlet.
WARNING
• Do NOT use an extension cord.
• Use only the power cord that comes
with the washing machine.
• Do NOT connect the ground wire to
plastic plumbing, gas lines, or hot water
pipes.
• Improperly connected grounding
conductors may cause electric shock.
To reduce the risk of leaks:
• Make sure water taps are easily
accessible.
• Turn off the taps when the washing
machine is not in use.
• Check for any leaks at the water inlet
hose fittings on a regular basis.
CAUTION
Before using the washing machine for
the first time, check all connections at the
water valve and taps for any leaks.
Drain
Samsung recommends a standpipe in
height of 60-90 cm. The drain hose must
be connected through the hose clip to the
standpipe, and the standpipe must fully
cover the drain hose.
English 17 Untitled-6 17
3/31/2017 12:16:28 PM
Installation
Electrical supply and grounding
Installation
Flooring
Alcove or closet installation
For best performance, the washing
machine must be installed on a solid floor.
Wood floors may need to be reinforced
to minimize vibration and/or unbalanced
loads. Carpeting and soft tile surfaces are
not a good resistance to vibrations and
may cause the washing machine to move
slightly during the spin cycle.
Minimum clearance for stable operation:
CAUTION
Installation
Do NOT install the washing machine on a
platform or a poorly supported structure.
Water temperature
Sides
25 mm
Top
25 mm
Rear
50 mm
Front
550 mm
If both the washing machine and a dryer
are installed in the same location, the front
of the alcove or closet must have at least
a 550 mm unobstructed air opening. Your
washing machine alone does not require a
specific air opening.
Do not install the washing machine in
areas where water may freeze as the
washing machine always retains some
water in its water valves, pumps, and/or
hoses. Frozen water left in the connection
parts may cause damage to belts, the
pump, and other components of the
washing machine.
18 English
Untitled-6 18
3/31/2017 12:16:28 PM
Step-by-step installation
STEP 1 Select a location
Location requirements:
•
•
•
•
•
Solid, level surface without carpeting or flooring that may obstruct ventilation
Away from direct sunlight
Adequate room for ventilation and wiring
The ambient temperature is always higher than the freezing point (0 ˚C)
Away from a heat source
STEP 2 Remove the shipping bolts
1. Loosen all shipping bolts on the rear of
the machine using the supplied spanner.
2. Fill the holes with the supplied plastic
bolt caps.
Keep the shipping bolts for future use.
WARNING
Packaging materials can be dangerous to children. Dispose all packaging material (plastic
bags, polystyrene, etc.) out of children’s reach.
English 19 Untitled-6 19
3/31/2017 12:16:28 PM
Installation
Unpack the product package and remove
all shipping bolts.
Installation
STEP 3 Adjust the levelling feet
1. Gently slide the washing machine into
position. Excessive force may damage
the levelling feet.
2. Level the washing machine by manually
adjusting the levelling feet.
3. When levelling is complete, tighten the
nuts using the spanner.
Installation
STEP 4 Connect the water hose
The provided hose adaptor may differ with the model. This step guides you through
connecting the connector-type adaptor. If you are provided with the screw-type adaptor,
go to 7.
Connect the water hose to the water tap.
A
1. Remove the adaptor (A) from the water
hose (B).
B
2. Use a Philips screwdriver to loosen four
screws on the adaptor.
20 English
Untitled-6 20
3/31/2017 12:16:29 PM
3. Hold the adaptor and turn part (C) in
the arrow direction to loosen it by 5
mm (*).
C
5. Turn part (C) in the arrow direction to
tighten it.
C
6. While holding down part (D), connect
the water hose to the adaptor. Then,
release part (D). The hose fits into the
adaptor with a clicking sound.
D
7. If you are using a screw type of water
tap, use the provided screw-type
adaptor to connect to the water tap as
shown.
English 21 Untitled-6 21
3/31/2017 12:16:30 PM
Installation
4. Insert the adaptor into the water tap,
and tighten the screws while lifting up
the adaptor.
Installation
8. Connect the other end of the water
hose to the inlet valve on the back of
the washing machine. Turn the hose
clockwise to tighten.
Installation
9. Open the water tap and check if there
are any leaks around the connection
areas. If there are water leaks, repeat
the steps above.
WARNING
Stop using the washing machine if there is a water leak, and contact a local Samsung
service centre. Otherwise, this may cause electric shock.
CAUTION
Do not stretch the water hose by force. If the hose is too short, replace the hose with a
longer, high-pressure hose.
NOTE
• After connecting the water hose to the adaptor, check if it is connected properly by
pulling the water hose downwards.
• Use a popular type of water taps. If the tap is square-shaped or too big, remove the
spacer ring before inserting the tap into the adaptor.
22 English
Untitled-6 22
3/31/2017 12:16:30 PM
For models with an additional hot water inlet:
1. Connect the red end of the hot water
hose to the hot water inlet on the back
of the machine.
2. Connect the other end of the hot water
hose to the hot water tap.
The aqua hose alerts users of a risk of
water leaks. It senses the water flow and
turns red on the centre indicator (A) in
case of a leak.
A
English 23 Untitled-6 23
3/31/2017 12:16:30 PM
Installation
Aqua hose (applicable models only)
Installation
STEP 5 Position the drain hose
The drain hose can be positioned in three ways:
Over the edge of a wash basin
A
The drain hose must be placed at a height
of between 60 cm and 90 cm (*) from the
floor. To keep the spout of the drain hose
bent, use the supplied plastic hose guide
(A). Secure the guide to the wall using a
hook to ensure stable drainage.
ln a sink drain pipe
Installation
The drain pipe must be above the sink
siphon so that the end of the hose is at
least 60 cm above the floor.
ln a drain pipe
The drain pipe should be between 60 cm
and 90 cm high (*). It is advisable to use
a 65 cm high vertical pipe. Make sure the
drain hose is connected to the stand pipe
at a slant.
Drain standpipe requirements:
• Minimum diameter of 5 cm
• Minimum carry-away capacity of
60 litres per minute
24 English
Untitled-6 24
3/31/2017 12:16:30 PM
CAUTION
Do not put the drain hose in places of
stagnant water or ponding. The water may
flow back to the washing machine.
Installation
STEP 6 Power on
Plug the power cord into a wall socket featuring an AC 220-240 V / 50 Hz approved
electrical outlet protected by a fuse or circuit breaker. Then, press Power to turn on the
washing machine.
English 25 Untitled-6 25
3/31/2017 12:16:31 PM
Before you start
Initial settings
Run Calibration (recommended)
Calibration ensures accurate weight detection by the washing machine. Make sure the
drum is empty before running Calibration.
1. Power off, and then power on the washing machine.
2. Hold down Temp. and Delay End simultaneously for 3 seconds to enter Calibration
mode. The “Cb” message appears.
3. Press Start/Pause to run the Calibration cycle.
4. The drum will rotate clockwise and counter-clockwise for about 3 minutes.
5. When the cycle is complete, “0” appears on the display and the washing machine will
turn off automatically.
6. The washing machine is now ready for use.
Before you start
Laundry guidelines
STEP 1 Sort
Sort the laundry according to these criteria:
• Care Label: Sort the laundry into cottons, mixed fibres, synthetics, silks, wools, and
rayon.
• Colour: Separate whites from colours.
• Size: Mixing different sized items together in the drum improves the washing
performance.
• Sensitivity: Wash delicate items separately using an Easy Iron option for pure, new
woollen items, curtains, and silk items. Check the labels on the items.
NOTE
Make sure to check the care label on the clothing, and sort them accordingly before
starting the wash.
26 English
Untitled-6 26
3/31/2017 12:16:31 PM
STEP 2 Empty pockets
Empty all the pockets of your laundry items
• Metal objects such as coins, pins, and buckles on clothing may damage other laundry
items as well as the drum.
Turn clothing with buttons and embroideries inside out
• If pants or jacket zippers are open while washing, the drum may be damaged. Zippers
should be closed and fixed with a string.
• Clothing with long strings may become entangled with other clothes. Make sure to tie
the strings before starting the wash.
STEP 3 Use a laundry net
STEP 4 Prewash (if necessary)
Select the Prewash option for the selected cycle if the laundry is heavily soiled. When
selecting the pre wash option, make sure to put powder-type detergent into the main
wash compartment.
STEP 5 Determine the load capacity
Do not overload the washing machine. Overloading may cause the washing machine to
not wash properly. For the load capacity for the type of clothing, see page 34.
NOTE
When washing bedding or bedding covers, the wash time may be lengthened or the spin
efficiency may be reduced. For bedding or bedding covers, the recommended maximum
spin cycle speed is 800 rpm, and the load capacity is 2.0 kg or less.
CAUTION
If the laundry is unbalanced and the “Ub” information code is displayed, redistribute the
load. Unbalanced laundry may reduce the spinning performance.
English 27 Untitled-6 27
3/31/2017 12:16:31 PM
Before you start
• Brassieres (water washable) must be placed in a laundry net. Metal parts of the
brassieres may break through and tear other laundry items.
• Small, light clothing such as socks, gloves, stockings, and handkerchiefs may become
caught around the door. Place them inside a fine laundry net.
• Do not wash the laundry net by itself without other laundry. This may cause abnormal
vibrations that could move the washing machine and result in injury.
Before you start
STEP 6 Apply a proper detergent type
The type of detergent depends on the type of fabric (cotton, synthetic, delicate items,
wool), colour, wash temperature, and degree of soiling. Always use “low suds” laundry
detergent, which is designed for automatic washing machines.
NOTE
• Follow the detergent manufacturer’s recommendations based on the weight of the
laundry, the degree of soiling, and the hardness of the water in your local area. If you
are not sure about the water hardness, contact a local water authority.
• Do not use detergent that tends to be hardened or solidified. This detergent may
remain after the rinse cycle, blocking the drain outlet.
CAUTION
Before you start
When washing wool using the WOOL cycle, use only a neutral liquid detergent. If used
with the WOOL cycle, powder detergent may remain on the laundry and discolour the
laundry.
Laundry capsules
To get the best results from using laundry capsules, please follow these instructions.
1. Put the capsule in the bottom of the
empty drum towards the rear.
2. Put the laundry in the drum on top of
the capsule.
28 English
Untitled-6 28
3/31/2017 12:16:31 PM
CAUTION
For cycles using cold water or cycles that complete in less than one hour, it is
recommended to use a liquid detergent. Otherwise, the capsule may not dissolve
completely.
Detergent drawer guidelines
The washing machine provides a three-compartment dispenser: the left compartment for
the main wash, the front-right for fabric softeners, and the rear-right for the preliminary
wash.
Prewash compartment: Apply
prewash detergent or starch.
2.
Main-wash compartment: Apply
main-wash detergent, water softener,
soaking detergent, bleach, and/or stain
removers.
3.
Softener compartment: Apply
additives such as fabric softener. Do not
exceed the max line (A).
A
NOTE
The actual appearance of the softener
guide may differ with the model.
CAUTION
• Do not open the detergent drawer while the washing machine is operating.
• Do not use the following types of detergent:
- Tablet or capsule types
- Ball or net types
• To prevent the compartment from clogging, concentrated or highly-enriched agents
(fabric softener or detergent) must be diluted with water before being applied.
English 29 Untitled-6 29
3/31/2017 12:16:32 PM
Before you start
1.
Before you start
• When Delay End is selected, do not apply detergent directly into the drum. Otherwise,
this may discolour the laundry. Use the detergent drawer when Delay End is selected.
To apply washing agents to the detergent drawer
1. Slide open the detergent drawer.
2. Apply laundry detergent to the mainwash compartment as instructed or
recommended by the manufacturer. To
use liquid detergent, see page 31.
Before you start
3. Apply fabric softener to the softener
compartment. Do not exceed the max
line (A).
Softener is dispensed into the wash
during the final rinse.
A
4. If you want to prewash, apply
prewash detergent to the prewash
compartment as instructed or
recommended by the manufacturer.
5. Close the detergent drawer.
30 English
Untitled-6 30
3/31/2017 12:16:33 PM
CAUTION
• Do not apply powder detergent to the
liquid detergent guide.
• Concentrated fabric softener must be
diluted with water before applied.
• Do not apply main-wash detergent to
the softener compartment.
To use liquid detergent (applicable models only)
CAUTION
A
• Do not exceed the max line that is
marked inside the container.
• Remove the liquid container if using
powder detergent.
English 31 Untitled-6 31
3/31/2017 12:16:33 PM
Before you start
First insert the provided liquid container
in the main-wash compartment. Then,
apply liquid detergent to the container
below the marked max line (A).
Operations
Control panel
02
08
10
01
09
03
04
05
06
07
11
01Cycle Selector
Turn the dial to select a cycle.
02Display
The display shows current cycle information and estimated time
remaining, or an information code when a problem occurs.
03Temp.
Press to change the water temperature for the current cycle.
04Rinse
Press to change the rinse count for the current cycle. You can set
the rinse count to a max of 5.
Operations
Press to change the spinning speed for the current cycle.
05Spin
• Rinse Hold
: The final rinse process is suspended so that the
laundry remains in the water. To unload the laundry, run a drain
or spin process.
• No Spin : The drum does not spin after the final drain process.
06Options
Press to select an option from Intensive, Pre Wash, Bubble Soak
and Quick Wash 15’/30’. Press again to deselect.
07Bubble Soak
Press to activate/deactivate the Bubble Soak function. This function
helps remove a wide variety of stubborn stains.
08Delay End
Delay End lets you set the end time of the current cycle. Based
on your settings, the start time of the cycle will be determined
by the machine’s internal logic. For example, this setting is useful
for programming your machine to finish a wash at the time you
normally return home from work.
• Press to choose a preset unit of hours.
09Quick Wash
15’/30’
For lightly soiled garments of less than 2 kg that you want to wash
quickly.
10Power
Press to turn on/off the washing machine.
11Start/Pause
Press to start or stop operation.
32 English
Untitled-6 32
3/31/2017 12:16:33 PM
Simple steps to start
2
1
6
3
4
5
1. Press Power to turn on the washing machine.
2. Turn the Cycle Selector to select a cycle.
3. Change the cycle settings (Temp., Rinse, and Spin) as necessary.
4. To add an option, press Options. Use the button again to choose a preferred item.
5. The machine provides three easy to access buttons for Bubble Soak, Quick Wash
15’/30’, and Delay End for your convenience. If you want to use one of these options,
press the corresponding button.
Operations
6. Press Start/Pause.
To change the cycle during operation
1. Press Start/Pause to stop operation.
2. Select a different cycle.
3. Press Start/Pause again to start the new cycle.
English 33 Untitled-6 33
3/31/2017 12:16:34 PM
Operations
Cycle overview
Standard cycles
Cycle
COTTON
COTTON
Description & Max load (kg)
• For cottons, bed linens, table linens, underwear,
towels, or shirts. The washing time and the rinse
count are automatically adjusted according to the
load.
Max
• Optimal performance with lower energy for cotton
fabrics, bed linens, table linens, underwear, towels,
or shirts. For energy saving, the actual washing
temperature may be lower than specified.
Max
• For blouses or shirts that are made of polyester
(diolen, trevira), polyamide (perlon, nylon), or the like.
4
• Specific for machine-washable wool for loads less
than 2.0 kg.
• The Wool cycle features gentle cradling and soaking
to protect the wool fibres from shrinkage/distortion.
• A neutral detergent is recommended.
2
DENIM
• Featuring a higher water level in the main wash
and an extra rinse cycle to ensure that no powder
detergent remains.
3
RINSE+SPIN
• Featuring an additional rinse process after applying
fabric softener to the laundry.
-
ECO DRUM CLEAN
• Cleans the drum by removing dirt and bacteria from
the drum.
• Perform once every 40 washes with no detergent or
bleach applied.
• Make sure the drum is empty.
• Do not use any cleaning agents for cleaning the drum.
-
SUPER SPEED
• Fast completion within 1 hour for everyday items
such as underwear and shirts.
• The cycle time will differ depending on the water
supply conditions, and the load and type of laundry.
5
SUPER ECO WASH
• Low temperature ecobubble cycle helps reduce power
consumption.
4
SYNTHETICS
WOOL
Operations
34 English
Untitled-6 34
3/31/2017 12:16:34 PM
Cycle
Description & Max load (kg)
BEDDING
• For bed spreads, bed sheets, bedding covers, etc.
• For best results, wash only 1 type of bedding and
make sure the load weighs less than 2.0 kg.
2
DELICATES
• For sheer fabrics, bras, lingerie (silk), and other
handwash-only fabrics.
• For best performance, use liquid detergent.
2
BABY CARE
• Featuring a high-temperature wash and extra rinses
to help remove the remaining detergent effectively.
4
OUTDOOR CARE
• For outdoor clothes, skiwear, and sportswear that are
made of functional materials such as spandex, stretch,
and micro-fibre.
2
DARK GARMENT
• Featuring additional rinses and reduced spinning to
ensure that the laundry is washed gently and rinsed
thoroughly.
4
Operations
English 35 Untitled-6 35
3/31/2017 12:16:34 PM
Operations
Options
Operations
Option
Description
Intensive
• For badly soiled laundry. The operation time for each cycle is
longer than normal.
Pre Wash
• This will add a preliminary washing cycle before the main
wash cycle.
Bubble Soak
• Bubble Soak helps remove a variety of stubborn stains.
• With Bubble Soak selected, laundry is thoroughly soaked in
water bubbles for effective washing.
• Bubble Soak is available with and adds up to 30 minutes to 4
cycles: Cotton, Synthetics, Denim, and Baby Care.
Quick Wash
15’/30’
• Specifically for up to 2 kg of lightly soiled garments.
• The cycle time differs depending on the water supply
conditions, the load and type of laundry, soiling levels, and
extra options selected.
• The cycle time changes from Off > 15 min > 30 min, and back
to Off in this sequence.
• A recommended amount of detergent is less than 20 g (for a
2 kg load).
36 English
Untitled-6 36
3/31/2017 12:16:35 PM
Delay End
You can set the washing machine to finish your wash automatically at a later time,
choosing a delay of between 1 to 19 hours (in 1 hour increments). The hour displayed
indicates the time the wash will finish.
1. Select a cycle. Then change the cycle settings if necessary.
2. Press Delay End repeatedly until a desired end time is set.
3. Press Start/Pause.
The corresponding indicator turns on with the clock running.
4. To cancel the Delay End, restart the washing machine by pressing Power.
Real-life case
You want to finish a two-hour cycle 3 hours later from now. For this, you add the Delay
End option to the current cycle with the 3-hour setting, and press Start/Pause at 2:00 p.m.
Then, what happens? The washing machine starts operating at 3:00 p.m., and ends at 5:00
p.m. Provided below is the time line for this example.
2:00 pm
Set the Delay End to 3 hours
3:00 pm
Start
5:00 pm
End
Operations
English 37 Untitled-6 37
3/31/2017 12:16:35 PM
Operations
Settings
Child Lock
Sound On/Off
To prevent accidents by children, Child
Lock locks all buttons except for Power.
You can turn on or off the key. Your
setting will remain effective after you
restart the machine.
• To set the Child Lock function, hold
down Temp. and Rinse simultaneously
for 3 seconds. To activate, press Start/
Pause.
• Before you press Start/Pause, you can
still open the door or change settings
by pressing corresponding buttons.
Once you press Start/Pause to run the
machine, Child Lock will be activated.
• To mute the sound, hold down Rinse
and Spin simultaneously for 3 seconds.
• To unmute the sound, hold down again
for 3 seconds.
To deactivate the Child Lock temporarily
Operations
Open the door, and hold down both Temp.
and Rinse simultaneously for 3 seconds.
Child Lock is deactivated temporarily for
1 minute, and the indicator blinks. Add
laundry, for example, and close the door
within the next 2 minutes. Otherwise, the
machine sounds an alert for another 2
minutes. Once you close the door, Child
Lock will be reactivated with the indicator
turned on.
NOTE
In the Child Lock state, you must first
deactivate the Child Lock if you want to
add detergent or laundry, or change the
current settings.
To cancel the Child Lock
Press and hold Temp. and Rinse
simultaneously for 6 seconds.
Alternatively, when the Child Lock is
deactivated temporarily, press and hold
Temp. and Rinse simultaneously for 3
seconds.
38 English
Untitled-6 38
3/31/2017 12:16:36 PM
Maintenance
Keep the washing machine clean to prevent deteriorated performance and to preserve its
life cycle.
Eco drum clean
Perform this cycle regularly to clean the drum and to remove bacteria from it.
1. Press Power to turn on the washing machine.
2. Turn the Cycle Selector to select ECO DRUM CLEAN.
3. Press Start/Pause.
NOTE
The water temperature for ECO DRUM CLEAN is set to 70 °C, which cannot be changed.
CAUTION
Do not use any cleaning agents for cleaning the drum. Chemical residue in the drum
deteriorates the washing performance.
ECO DRUM CLEAN reminder
• The ECO DRUM CLEAN reminder appears on the main screen once every 40 washes. It
is advisable to perform the ECO DRUM CLEAN regularly.
• When you first see this reminder, you can ignore the reminder for 6 consecutive
washes. From the 7th wash, the reminder no longer appears. However, it appears again
on the second 40th wash.
Maintenance
English 39 Untitled-6 39
3/31/2017 12:16:36 PM
Maintenance
Smart Check
To enable this function, you must first download the Samsung Smart Washer app at
the Play Store or the Apple Store, and install it on a mobile device featuring a camera
function.
The Smart Check function has been optimized for Galaxy & iPhone series (applicable
models only).
1. Press and hold Spin and Options simultaneously for 3 seconds to enter the Smart Check
mode.
2. The washing machine starts the self-diagnosis procedure and displays an information
code if a problem is detected.
3. Run the Samsung Smart Washer app on your mobile device, and tap Smart Check.
4. Put the mobile device close to the washing machine’s display so that the mobile
device and the washing machine face each other. Then, the information code will be
recognized automatically by the app.
5. When the information code is recognized correctly, the app provides detailed
information about the problem with applicable solutions.
NOTE
Maintenance
• The function name, Smart Check, may differ depending on the language.
• If there is strong reflected light on the washing machine display, the app may fail to
recognize the information code.
• If the app fails to recognize the Smart Check code consecutively, enter the information
code manually onto the app screen.
40 English
Untitled-6 40
3/31/2017 12:16:36 PM
Emergency drain
In case of a power failure, drain the water inside the drum before taking out the laundry.
A
1. Power off and unplug the washing
machine from the electrical outlet.
2. Gently press the top area of the filter
cover (A) to open.
3. Put an empty, spacious container
around the cover, and stretch the
emergency drain tube to the container
while holding the tube cap (B).
B
5. When done, close the tube cap, and
reinsert the tube. Then, close the filter
cover.
NOTE
Use a spacious container because the
water in the drum may be more than
expected.
English 41 Untitled-6 41
3/31/2017 12:16:36 PM
Maintenance
C
4. Open the tube cap and let water in the
emergency drain tube (C) flow into the
container.
Maintenance
Cleaning
Surface of the washing machine
Use a soft cloth with a nonabrasive household detergent. Do not spray water onto the
washing machine.
Mesh filter
Clean the mesh filter of the water hose once or twice a year.
1. Turn off the washing machine, and
unplug the power cord.
2. Close the water tap.
3. Loosen and disconnect the water hose
from the back of the washing machine.
Cover the hose with a cloth to prevent
water from gushing out.
4. Use pliers to pull out the mesh filter
from the inlet valve.
Maintenance
5. Submerge the mesh filter deeply in
water so that the threaded connector is
also submerged.
6. Dry the mesh filter completely in the
shade.
7. Reinsert the mesh filter into the inlet
valve, and reconnect the water hose to
the inlet valve.
8. Open the water tap.
NOTE
If the mesh filter is clogged, an information code of “4C” appears on the screen.
42 English
Untitled-6 42
3/31/2017 12:16:37 PM
Pump filter
It is advisable to clean the pump filter 5 or 6 times a year to prevent its clogging. A
clogged pump filter may reduce the bubble effect.
1. Turn off the washing machine, and
unplug the power cord.
2. Drain the remaining water inside
the drum. See the “Emergency drain”
section.
3. Gently press the top area of the filter
cover to open.
4. Turn the pump filter knob to the left,
and drain off the remaining water.
5. Clean the pump filter using soft
brushes. Make sure the drain pump
propeller inside the filter is unclogged.
6. Reinsert the pump filter, and turn the
filter knob to the right.
• Some pump filters feature a safety knob
that is designed to prevent accidents
by children. To open the safety knob
of the pump filter, push in and turn it
anticlockwise. The spring mechanism of
the safety knob helps open the filter.
• To close the safety knob of the pump
filter, turn it clockwise. The spring
makes a rattling sound, which is normal.
NOTE
If the pump filter is clogged, an information code of “5C” appears on the screen.
CAUTION
• Make sure the filter knob is closed properly after cleaning the filter. Otherwise, this
may cause a leak.
• Make sure the filter is inserted properly after cleaning it. Otherwise, this may cause an
operational failure or a leak.
English 43 Untitled-6 43
3/31/2017 12:16:37 PM
Maintenance
NOTE
Maintenance
Detergent drawer
B
1. While holding down the release lever
(B) on the inner of the drawer, slide
open the drawer.
2. Remove the release lever and the
Liquid detergent guide from the drawer.
3. Clean the drawer components in
flowing water using a soft brush.
Maintenance
4. Clean the drawer recess using a soft
brush.
5. Reinsert the release lever and the
Liquid detergent guide to the drawer.
6. Slide the drawer inward to close it.
NOTE
To remove remaining detergent, perform the RINSE+SPIN cycle with the drum being
empty.
44 English
Untitled-6 44
3/31/2017 12:16:38 PM
Recovery from freezing
The washing machine may freeze when it drops below 0 °C.
1. Turn off the washing machine, and unplug the power cord.
2. Pour warm water over the water tap to loosen the water hose.
3. Disconnect the water hose, and soak it in warm water.
4. Pour warm water into the drum and leave it for about 10 minutes.
5. Reconnect the water hose to the water tap.
NOTE
If the washing machine still doesn’t operate normally, repeat the above steps until it
operates normally.
Care against an extended time of disuse
Avoid leaving the washing machine unused for an extended time. If this is the case, drain
the washing machine and unplug the power cord.
1. Turn the Cycle Selector to select RINSE+SPIN.
2. Empty the drum, and press Start/Pause.
3. When the cycle is complete, close the water tap and disconnect the water hose.
4. Turn off the washing machine, and unplug the power cord.
5. Open the door to let air circulate through the drum.
Maintenance
English 45 Untitled-6 45
3/31/2017 12:16:38 PM
Troubleshooting
Checkpoints
If you encounter a problem with the washing machine, first check the table below and try
the suggestions.
Problem
Action
•
•
•
•
Troubleshooting
Does not start.
Make sure the washing machine is plugged in.
Make sure the door is properly closed.
Make sure the water taps are open.
Make sure to press or tap Start/Pause to start the washing
machine.
• Make sure Child Lock is not activated.
• Before the washing machine starts to fill, it will make a series
of clicking noises to check the door lock and does a quick
drain.
• Check the fuse or reset the circuit breaker.
Water supply is
insufficient, or no
water is supplied.
•
•
•
•
•
After a cycle,
detergent remains
in the detergent
drawer.
• Make sure the washing machine is running with sufficient
water pressure.
• Make sure the detergent is added to the centre of the
detergent drawer.
• Make sure the rinse cap is inserted properly.
• If using granular detergent, make sure the detergent selector
is in the upper position.
• Remove the rinse cap and clean the detergent drawer.
Fully open the water tap.
Make sure the door is properly closed.
Make sure the water supply hose is not frozen.
Make sure the water supply hose is not kinked or clogged.
Make sure there is sufficient water pressure.
46 English
Untitled-6 46
3/31/2017 12:16:38 PM
Problem
Action
Does not drain and/
or spin.
• Make sure the drain hose is straightened all the way to the
drain system. If you encounter a drain restriction, call for
service.
• Make sure the debris filter is not clogged.
• Close the door and press or tap Start/Pause. For your safety,
the washing machine will not tumble or spin unless the door
is closed.
• Make sure the drain hose is not frozen or clogged.
• Make sure the drain hose is connected to a drain system that
is not clogged.
• If the washing machine is not supplied with sufficient power,
the washing machine temporarily will not drain or spin. As
soon as the washing machine regains sufficient power, it will
operate normally.
The door does not
open.
• Press or tap Start/Pause to stop the washing machine.
• It may take a few moments for the door lock mechanism to
disengage.
• The door will not open until 3 minutes after the washing
machine has stopped or the power turned off.
• Make sure all the water in the drum is drained.
• The door may not open if water remains in the drum. Drain
the drum and open the door manually.
• Make sure the door lock light is off. The door lock light turns
off after the washing machine has drained.
English 47 Untitled-6 47
3/31/2017 12:16:38 PM
Troubleshooting
Excessive vibrations
or makes noise.
• Make sure the washing machine is installed on a level, solid
floor that is not slippery. If the floor is not level, use the
levelling feet to adjust the height of the washing machine.
• Make sure the shipping bolts are removed.
• Make sure the washing machine is not contacting any other
object.
• Make sure the laundry load is balanced.
• The motor can cause noise during normal operation.
• Overalls or metal-decorated clothes can cause noise while
being washed. This is normal.
• Metal objects such as coins can cause noise. After washing,
remove these objects from the drum or filter case.
Troubleshooting
Problem
Action
Cannot apply
additional detergent.
• Make sure the remaining amount of detergent and fabric
softener is not over the limit.
Stops.
• Plug the power cord into a live electrical outlet.
• Check the fuse or reset the circuit breaker.
• Close the door and press the Start/Pause button to start the
washing machine. For your safety, the washing machine will
not tumble or spin unless the door is closed.
• Before the washing machine starts to fill, it will make a series
of clicking noises to check the door lock and does a quick
drain.
• There may be a pause or soak period in the cycle. Wait briefly
and the washing machine may start.
• Make sure the mesh filter of the water supply hose at the
water taps is not clogged. Periodically clean the mesh filter.
• If the washing machine is not supplied with sufficient power,
the washing machine temporarily will not drain or spin. As
soon as the washing machine regains sufficient power, it will
operate normally.
Troubleshooting
Excessive suds.
• Make sure you use the recommended types of detergent as
appropriate.
• Use high efficiency (HE) detergent to prevent oversudsing.
• Reduce the detergent amount for soft water, small loads, or
lightly soiled loads.
• Non-HE detergent is not recommended.
48 English
Untitled-6 48
3/31/2017 12:16:38 PM
Problem
Action
Load is wet at the
end of a cycle.
• Use the High or Extra High spin speed.
• Use high efficiency (HE) detergent to reduce oversudsing.
• Load is too small. Small loads (one or two items) may become
unbalanced and not spin completely.
• Make sure the drain hose is not kinked or clogged.
Leaks water.
• Make sure the door is properly closed.
• Make sure all hose connections are tight.
• Make sure the end of the drain hose is correctly inserted and
secured to the drain system.
• Avoid overloading.
• Use high efficiency (HE) detergent to prevent oversudsing.
Has odours.
•
•
•
•
No bubbles are seen
(Bubbleshot models
only).
• Overloading may screen bubbles.
• Severely contaminated laundry may not generate bubbles.
Excessive suds collect in recesses and can cause foul odours.
Run cleansing cycles to sanitize periodically.
Clean the door seal (diaphragm).
Dry the washing machine interior after a cycle has finished.
If a problem persists, contact a local Samsung service centre.
English 49 Untitled-6 49
3/31/2017 12:16:38 PM
Troubleshooting
Fills with the wrong
water temperature.
• Fully open both taps.
• Make sure the temperature selection is correct.
• Make sure the hoses are connected to the correct taps. Flush
water lines.
• Make sure the water heater is set to supply a minimum 120
°F (49 °C) hot water at the tap. Also, check the water heater
capacity and recovery rate.
• Disconnect the hoses and clean the mesh filter. The mesh
filter may be clogged.
• While the washing machine fills, the water temperature may
change as the automatic temperature control feature checks
incoming water temperature. This is normal.
• While the washing machine fills, you may notice just hot and/
or just cold water going through the dispenser when cold or
warm temperatures are selected. This is a normal function
of the automatic temperature control feature as the washing
machine determines the water temperature.
Troubleshooting
Information codes
If the washing machine fails to operate, you may see an information code on the screen.
Check the table below and try the suggestions.
Code
Action
Water is not supplied.
4C
4C2
•
•
•
•
Make sure the water taps are open.
Make sure the water hoses are not clogged.
Make sure the water taps are not frozen.
Make sure the washing machine is operating with sufficient
water pressure.
• Make sure that the cold water tap and the hot water tap are
properly connected.
• Clean the mesh filter as it may be clogged.
• Make sure the cold water supply hose is firmly connected to
the cold water tap. If it is connected to the hot water tap, the
laundry may be deformed with some cycles.
Water is not draining.
5C
Troubleshooting
• Make sure the drain hose is not frozen or clogged.
• Make sure the drain hose is positioned correctly, depending
on the connection type.
• Clean the debris filter as it may be clogged.
• Make sure the drain hose is straightened all the way to the
drain system.
• If the information code remains, contact a customer service
centre.
Operating the washer with the door open.
dC
• Make sure the door is properly closed.
• Make sure laundry is not caught in the door.
Water has overflowed.
OC
• Restart after spinning.
• If the information code remains on the display, contact a local
Samsung service centre.
Check the drain hose.
LC, LC1
• Make sure the end of the drain hose is not placed on the floor.
• Make sure the drain hose is not clogged.
• If the information code remains, contact a customer service
centre.
50 English
Untitled-6 50
3/31/2017 12:16:38 PM
Code
Action
Spinning does not work.
Ub
• Make sure laundry is spread out evenly.
• Make sure the washing machine is on a flat, stable surface.
• Redistribute the load. If only one item of clothing needs
washing, such as a bathrobe or pair of jeans, the final spin
result might be unsatisfactory, and an “Ub” check message
will be shown in the display.
Check the motor for operation.
3C
• Try restarting the cycle.
• If the information code remains, contact a customer service
centre.
The electronic control needs to be checked.
UC
• Check if power is supplied properly.
• If the information code remains, contact a customer service
centre.
Low voltage detected.
• Check if the power cord is plugged in.
• If the information code remains, contact a customer service
centre.
High temperature heating check.
HC
• If the information code remains, contact a customer service
centre.
1C
• Turn the machine off, and restart the cycle.
• If the information code remains, contact a customer service
centre.
Check communications between main and sub PBAs.
AC
• Turn the machine off, and restart the cycle.
• If the information code remains, contact a customer service
centre.
If any information code keeps appearing on the screen, contact a local Samsung service
centre.
English 51 Untitled-6 51
3/31/2017 12:16:38 PM
Troubleshooting
The Water Level sensor is not working properly.
Specifications
Fabric care chart
The following symbols provide garment care directions. The care labels include four
symbols in this order: washing, bleaching, drying and ironing (and dry cleaning when
necessary). The use of symbols ensures consistency among garment manufacturers of
domestic and imported items. Follow the care label directions to maximise garment life
and reduce laundry problems.
Resistant material
Do not iron
Delicate fabric
Can be dry cleaned using any
solvent
Item can be washed at 95 °C
Dry clean
Item can be washed at 60 °C
Dry clean with perchloride,
lighter fuel, pure alcohol or
R113 only
Item can be washed at 40 °C
Dry clean with aviation fuel,
pure alcohol or R113 only
Item can be washed at 30 °C
Do not dry clean
Hand wash only
Dry flat
Dry clean only
Can be hung to dry
Can be bleached in cold water
Dry on clothes hanger
Do not bleach
Tumble dry, normal heat
Can be ironed at 200 °C max
Tumble dry, reduced heat
Can be ironed at 150 °C max
Do not tumble dry
Specification
Can be ironed at 100 °C max
52 English
Untitled-6 52
3/31/2017 12:16:42 PM
Protecting the environment
• This appliance is manufactured from recyclable materials. If you decide to dispose of
this appliance, please observe local waste disposal regulations. Cut off the power cord
so that the appliance cannot be connected to a power source. Remove the door so that
animals and small children cannot get trapped inside the appliance.
• Do not exceed the detergent quantities recommended in the detergent manufacturer’s
instructions.
• Use stain removal products and bleaches before the wash cycle only when strictly
necessary.
• Save water and electricity by only washing full loads (the exact amount depends upon
the cycle used).
Specification
English 53 Untitled-6 53
3/31/2017 12:16:42 PM
Specification
Specification sheet
“*” Asterisk(s) means variant model and can be varied (0-9) or (A-Z).
Type
Front loading washing machine
Model name
WW9*J6******
Dimensions
W 600 x D 550 x H 850 (mm)
Water pressure
50 kPa - 800 kPa
Net weight
61.0 kg
Wash and spin capacity
9.0 kg
Power
consumption
Washing and
heating
Spin revolutions
220 V
2000 W
240 V
2400 W
1400 rpm
NOTE
The design and specifications are subject to change without notice for quality
improvement purposes.
Specification
54 English
Untitled-6 54
3/31/2017 12:16:42 PM
According to Regulation (EU) No. 1061/2010
“*” Asterisk(s) means variant model and can be varied (0-9) or (A-Z).
Samsung
Model Name
Capacity
kg
WW9*J6******
9.0
Energy Efficiency
A + + + (highest efficiency) to D (least efficient)
A+++
Energy Consumption
Annual Energy Consumption (AE_C) 1)
Energy consumption (E_t.60) Cotton 60 °C at full load
Energy consumption (E_t.60.1/2) Cotton 60 °C with partial
load
Energy consumption (E_t.40.1/2) Cotton 40 °C with partial
load
Weighted power off-mode (P_o)
Weighted Power in left-on mode (P_l)
Annual water consumption (AW_c) 2)
kWh/yr
kWh
130
0.65
kWh
0.51
kWh
0.51
W
W
L/yr
0.48
5.00
9400
rpm
%
A
1400
44
Spin efficiency class 3)
A (most efficient) to G (least efficient)
Maximum Spin Speed
Residual moisture
Cycles to which the information on the label and the Sheet relate
COTTON 60 °C and 40 °C 4)
Cycles duration of the standard cycles
COTTON 60 °C at full load
COTTON 60 °C for partial load
COTTON 40 °C with partial load
Weighted time in left-on mode
min
min
min
min
294
284
284
2
dB (A) re 1 pW
dB (A) re 1 pW
53
74
Airborne noise emissions
Wash
Spin
NOTE
2. Annual water consumption is based on 220 standard washing cycles for COTTON
cycle at 60 °C and 40 °C at full and partial load. Actual water consumption will depend
on how the appliance is used.
3. Spin extraction is very important when you use a clothes dryer to dry your clothes. The
energy for drying costs much higher than the energy for washing. Washing with the
high spin saves more energy than drying your clothes in a clothes dryer.
English 55 Untitled-6 55
3/31/2017 12:16:42 PM
Specification
1. Annual energy consumption is based on 220 standard washing cycles for COTTON
cycle at 60 °C and 40 °C at full and partial load, and the consumption of off and left-on
modes. Actual energy consumption will depend on how the appliance is used.
Specification
4. The COTTON 60 °C and COTTON 40 °C cycles are the ‘standard cotton 60 °C cycle’
and the ‘standard cotton 40 °C cycle’. They are suitable to clean normally soiled cotton
laundry and they are the most efficient (concerning water and energy consumption)
for this type of laundry. Please run Calibration Mode after the installation (refer to the
“Run Calibration (recommended)” section on page 26). In these cycles the actual water
temperature may differ from the declared temperature.
Information of main washing cycles
Model
Cycles
COTTON
WW9*J6******
COTTON
SYNTHETICS
Temperature
(°C)
Capacity
(kg)
Cycle Time
(min)
20
40
4.5
4.5
4.5
9.0
4.0
137
284
284
294
154
60
40
Residual
Water
Energy
Moisture Consumption Consumption
Content (%)
(L/cycle)
(kWh/Cycle)
56
65
0.36
44
39
0.51
44
39
0.51
44
47
0.65
35
68
0.65
The values on the table have been measured under the conditions specified in Standard
IEC60456/EN60456. Actual values will depend on how the appliance is used.
Specification
56 English
Untitled-6 56
3/31/2017 12:16:42 PM
Memo
Untitled-6 57
3/31/2017 12:16:42 PM
Memo
Untitled-6 58
3/31/2017 12:16:42 PM
Memo
Untitled-6 59
3/31/2017 12:16:42 PM
QUESTIONS OR COMMENTS?
COUNTRY
RUSSIA
BELARUS
GEORGIA
ARMENIA
AZERBAIJAN
KAZAKHSTAN
CALL
8-800-555-55-55
(VIP care 8-800-555-55-88)
810-800-500-55-500
0-800-555-555
0-800-05-555
0-88-555-55-55
8-10-800-500-55-500
UZBEKISTAN
KYRGYZSTAN
TAJIKISTAN
MONGOLIA
(GSM: 7799, VIP care 7700)
00-800-500-55-500 (GSM: 7799)
00-800-500-55-500 (GSM: 9977)
8-10-800-500-55-500
+7-495-363-17-00
UKRAINE
0-800-502-000
MOLDOVA
0-800-614-40
OR VISIT US ONLINE AT
www.samsung.com/ru/support
www.samsung.com/support
www.samsung.com/support
www.samsung.com/support
www.samsung.com/support
www.samsung.com/kz_ru/support
www.samsung.com/support
www.samsung.com/support
www.samsung.com/support
www.samsung.com/support
www.samsung.com/ua/support (Ukrainian)
www.samsung.com/ua_ru/support (Russian)
www.samsung.com/support
DC68-03580U-02
Untitled-6 60
3/31/2017 12:16:43 PM
Download PDF

advertising