Samsung | AM028JNVDEH/TK | Samsung AM071JNVDEH/TK Operating instrustions

Features of your new air conditioner
Turbo function
You can set the Turbo function to provide fast and powerful cooling (heating).
Easy Filter
There is no grille to remove before separating the filter from the air conditioner! Therefore, filter can
be cleaned easily, more frequently! Frequent filter cleaning will prevent dust from entering into the
product or accumulating on the filter.
function
function will allow you to have deep, good night’s sleep by adjusting the
temperature, fan speed and air flow direction.
Easy Installation
It’s so easy to install! You can easily hang the product on the wall and connect the pipes and wires
by opening the cover on the bottom of the product. Now you won’t have to tilt the product to
connect the pipe and the wires!
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB
cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to
promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for details of
where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic
accessories should not be mixed with other commercial wastes for disposal.
English-2
Contents
Preparation
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Checking before use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Checking the name of the parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Using the remote controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Basic operation
Basic operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Timer
Setting the On/Off timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Setting the good'sleep mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Options
Using the Turbo function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Using the Purity function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Settings
Selecting an indoor unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Selecting a blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Others
Cleaning the air conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Maintaining the air conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Instruction for packing and unpacking the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
English-3
Safety precautions
Before using your new air conditioner, please read this manual thoroughly to ensure
that you know how to safely and efficiently operate the extensive features and
functions of your new appliance.
Because the following operating instructions cover various models, the
characteristics of your air conditioner may differ slightly from those described in this
manual. If you have any questions, call your nearest contact center or find help and
information online at www.samsung.com.
Important safety symbols and precautions:
WARNING
CAUTION
Hazards or unsafe practices that may result in severe
personal injury or death.
Hazards or unsafe practices that may result in minor
personal injury or property damage.
Follow directions.
Cut-off the power supply.
Do NOT attempt.
Do NOT disassemble.
Make sure the machine is grounded to prevent electric shock.
FOR INSTALLATION
WARNING
Use the power line with the power specifications of the product or higher
and use the power line for this appliance only. In addition, do not use an
extension line.
 Extending the power line may result in electric shock or fire.
 Do not use an electric transformer. It may result in electric shock or fire.
 If the voltage/frequency/rated current condition is different, it may cause fire.
The installation of this appliance must be performed by a qualified
technician or service company.
 Failing to do so may result in electric shock, fire, explosion, problems with the
product, or injury and may also void warranty on the installed product.
Install a Isolation Switch next to the Air Conditioner (but not on the panels
of the Air Conditioner)and circuit breaker dedicated to the air conditioner.
 Failing to do so may result in electric shock or fire.
Fix the outdoor unit firmly so that the electric part of the outdoor unit is not
exposed.
 Failing to do so may result in electric shock, fire, explosion, problems with the
product.
English-4
FOR INSTALLATION
CAUTION
Install your appliance on a level and hard floor that can support its weight.
 Failing to do so may result in abnormal vibrations, noise, or problems with the
product.
Install the draining hose properly so that water is drained correctly.
 Failing to do so may result in water overflowing and property damage. Avoid
adding drain to waste pipes as odours may arise in the future.
When installing the outdoor unit, make sure to connect the draining hose
so that draining is performed correctly.
 The water generated during the heating operation by the outdoor unit may
overflow and result in property damage.
In particular, in winter, if a block of ice falls, it may result in injury, death or
property damage.
FOR POWER SUPPLY
WARNING
When the circuit breaker is damaged, contact your nearest service center.
Do not pull or excessively bend the power line. Do not twist or tie the
power line. Do not hook the power line over a metal object, place a heavy
object on the power line, insert the power line between objects, or push
the power line into the space behind the appliance.
 This may result in electric shock or fire.
English-5
01 PREPARATION
Do not install this appliance near a heater, inflammable material. Do
not install this appliance in a humid, oily or dusty location, in a location
exposed to direct sunlight and water (rain drops). Do not install this
appliance in a location where gas may leak.
 This may result in electric shock or fire.
Never install the outdoor unit in a location such as on a high external wall
where it could fall.
 If the outdoor unit falls, it may result in injury, death or property damage.
This appliance must be properly grounded. Do not ground the appliance to a
gas pipe, plastic water pipe, or telephone line.
 Failure to do so may result in electric shock, fire, and explosion.
 Make sure to use a socket-outlet with ground.
Safety precautions
FOR POWER SUPPLY
CAUTION
When not using the air conditioner for a long period of time or during a
thunder/lightning storm, cut the power at the circuit breaker.
 Failing to do so may result in electric shock or fire.
FOR USING
WARNING
If the appliance is flooded, please contact your nearest service center.
 Failing to do so may result in electric shock or fire.
If the appliance generates a strange noise, a burning smell or smoke, cutoff the power supply immediately and contact the nearest service center.
 Failing to do so may result in electric shock or fire.
In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate
immediately without touching the power line. Do not touch the appliance
or power line.
 Do not use a ventilating fan.
 A spark may result in an explosion or fire.
To reinstall the air conditioner, please contact your nearest service center.
 Failing to do so may result in problems with the product, water leakage,
electric shock, or fire.
 A delivery service for the product is not provided. If you reinstall the product in
another location, additional construction expenses and an installation fee will
be charged.
 Especially, when you wish to install the product in an unusual location such as
in an industrial area or near the seaside where it is exposed to the salt in the air,
please contact your nearest service center.
Do not touch the circuit breaker with wet hands.
 This may result in electric shock.
Do not turn the air conditioner off with the circuit breaker while it is
operating.
 Turning the air conditioner off and then on again with the circuit breaker may
cause a spark and result in electric shock or fire.
After unpacking the air conditioner, keep all packaging materials well
out of the reach of children, as packaging materials can be dangerous to
children.
 If a child places a bag over its head, it may result in suffocation.
English-6
FOR USING
WARNING
Do not place an object near the outdoor unit that allows children to climb
onto the machine.
 This may result in children seriously injuring themselves.
Do not use this air conditioner for long periods of time in badly ventilated
locations or near infirm people.
 Since this may be dangerous due to a lack of oxygen, Open a window at least
once an hour.
If any foreign substance such as water has entered the appliance, cut-off
the power supply and contact the nearest service center.
 Failing to do so may result in electric shock or fire.
Do not attempt to repair, disassemble, or modify the appliance yourself.
 Do not use any fuse (such as cooper, steel wire, etc.)other than the standard
fuse.
 Failing to do so may result in electric shock, fire, problems with the product, or
injury.
English-7
01 PREPARATION
Do not insert your fingers or foreign substances into the outlet when the air
conditioner is operating.
 Take special care that children do not injure themselves by inserting their
fingers into the product.
Do not touch the air flow blade with your hands or fingers during the
heating operation.
 This may result in electric shock or burns.
Do not insert your fingers or foreign substances into the air inlet/outlet of
the air conditioner.
 Take special care that children do not injure themselves by inserting their
fingers into the product.
Do not strike or pull the air conditioner with excessive force.
 This may result in fire, injury, or problems with the product.
Safety precautions
FOR USING
CAUTION
Do not place objects or devices under the indoor unit.
 Water dripping from the indoor unit may result in fire or property damage.
(example electrical appliances)
Check that the installation frame of the outdoor unit is not broken at least
once a year.
 Failing to do so may result in injury, death or property damage.
Max current is measured according to IEC standard for safety and current is
measured according to ISO standard for energy efficiency.
Do not stand on top of the appliance or place objects (such as laundry,
lighted candles, lighted cigarettes, dishes, chemicals, metal objects, etc.) on
the appliance.
 This may result in electric shock, fire, problems with the product, or injury.
Do not operate the appliance with wet hands.
 This may result in electric shock.
Do not spray volatile material such as insecticide onto the surface of the
appliance.
 As well as being harmful to humans, it may also result in electric shock, fire or
problems with the product.
Do not drink the water from the air conditioner.
 The water may be harmful to humans.
Do not apply a strong impact to the remote controller and do not
disassemble the remote controller.
Do not touch the pipes connected with the product.
 This may result in burns or injury.
Do not use this air conditioner to preserve precision equipment, food,
animals, plants or cosmetics, or for any other unusual purposes.
 This may result in property damage.
Avoid directly exposing humans, animals or plants from the air flow from
the air conditioner for long periods of time.
 This may result in harm to humans, animals or plants.
English-8
FOR CLEANING
WARNING
Do not clean the appliance by spraying water directly onto it. Do not use
benzene, thinner or alcohol to clean the appliance.
 This may result in discoloration, deformation, damage, electric shock or fire.
Before cleaning or performing maintenance, cut-off the power supply and
wait until the fan stops.
 Failing to do so may result in electric shock or fire.
FOR CLEANING
CAUTION
Take care when cleaning the surface of the heat exchanger of the outdoor
unit since it has sharp edges.
 This should be done by a qualified technician please contact your installer or
service center.
Do not clean the inside of the air conditioner by yourself.
 For cleaning inside the appliance, contact your nearest service center.
 When cleaning the internal filter, refer to the descriptions in the ‘Cleaning the
air conditioner’ section.
 Failure to do may result in damage, electric shock or fire.
English-9
01 PREPARATION
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
appliance.
For use in Europe : This appliance can be used by children aged from 8
years and above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe way
and understand the hazards involved. Children shall not play with the
appliance. Cleaning and user maintenance shall not be made by children
without supervision.
Checking before use
Operation ranges
The table below indicates the temperature and humidity ranges the air
conditioner can be operated within. Refer to the table for efficient use.
OPERATIONAL TEMPERATURE
MODE


INDOOR HUMIDITY
IF OUT OF CONDITIONS
-5˚C to 48˚
80% or less
Condensation may occur on the indoor unit
with risk to have either water blow off or drops
on the floor.
27˚C or less
-20˚C to 24˚C
-
Internal protection triggers and the air
conditioner will stop.
16˚C to 32˚C
-5˚C to 48˚C
-
Condensation may occur on the indoor unit
with risk to have either water blow off or drops
on the floor.
INDOOR
OUTDOOR
COOLING
16˚C to 32˚C
HEATING
DRYING
The standardized temperature for heating is 7˚C. If the outdoor temperature drops to 0˚C or below, the heating capacity can
be reduced depending on the temperature condition.
If the cooling operation is used at over 32˚C(indoor temperature), it does not cool at its full capacity.
Maintaining your air conditioner
Internal protections via the unit control system
 This internal protection operates if an internal fault occurs in the air conditioner.
Type
Against cold air
Defrost cycle
Protect compressor
Description
The internal fan will be off to prevent cold air when the heat pump is heating.
The internal fan will be off to defrost ice when the heat pump is heating.
Vertical air flow blade will be closed during defrost cycle and it will open again during
heating operation after defrost cycle.
The air conditioner does not start operating immediately to help protect the compressor
of the outdoor unit after it has been started.
• If the heat pump is operating in Heat mode, defrost cycle is actuated to help remove frost from an outdoor unit that
may have deposited at low temperatures.
The internal fan is switched off automatically and restarted only after the defrost cycle is completed.
CAUTION
•Please cover the air conditioner with PE BAG after installation,
and remove it when you start to run air conditioner.
English-10
Checking the name of the parts
Main parts
Air filter
Air flow blade
(up and down)
Air intake
Air flow blade
(left and right)
Display
Operation indicator
Timer/Auto clean indicator
Power button/
Remote controller receiver
Turbo indicator
English-11
01 PREPARATION
Room
temperature
sensor
Using the remote controller
ffPoint the remote controller towards the remote controller receiver of the indoor unit.
ffWhen you press the button on the remote controller correctly, you will hear beep sound from the indoor unit and a
transmit indicator( ) appears on the remote controller display.
Remote controller buttons
Air flow direction (Up and down)
Adusts the air flow direction up and down
(Not applicable to Duct type models).
Power
Turns the air conditioner on or off.
Mode
Selects operation mode.
Temperature
Fan speed
Adjusts the temperature.
Adjusts the fan speed.
Options
Air flow direction (Left and right)
Selects options during operation.
Adjusts the air flow direction left and right.
Timer
Settings
Sets timer option.
Selects settings.
SET
Selects or cancels an option.
Direction
Moves to select and set an option.
NOTE
• In case you wish to cancel the options or settings that you have just set, press the Options or Settings button
again, then the most recently selected item will blink and you may simply cancel it by pressing the SET button
while selected item is blinking.
English-12
Remote controller display
Remote controller
transmission
Low battery
Set temperature or on/off set
time with the timer function
Fan speed
On/Off timer
Air flow direction
Options
Settings
NOTE
• For MR-EH00U/MR-EC00U model, the temperature unit will be indicated by "°F" on the display.
• When turning off and turning on the remote controller, the Timer, Options and Settings set before turning off
the remote controller are cancelled. However, the fan direction does not change.
Battery changing time
When the battery is exhausted, ( ) will be displayed on the remote controller display. When the icon appears, change the
batteries.
The remote controller requires two 1.5V AAA type batteries.
Storing the remote controller
When you do not use the remote controller for a long time, remove the batteries from the remote controller
and store it in the remote controller holder.
English-13
01 PREPARATION
Operation mode
*Heat mode is applicable to
MR-EH00/MR-EH00U model
only.
Using the remote controller
Inserting the batteries
1. Open the battery cover of the remote controller.
-- Press the (
) part gently and lift it up in the arrow direction.
2. Insert the batteries.
-- Check and match the (+)and (-) signs accordingly.
3. Close the battery cover.
-- Match the cover and bottom part of the remote controller and press it until you hear click
sound.
CAUTION
NOTE
• Make sure that water is not allowed to enter the remote controller.
• There is a possibility that the air conditioner will not operate by remote controller near strong light such as a
fluorescent lamp or neon sign. In this case, use the remote controller in front of the remote controller receiver of
the indoor unit.
• If other electrical products are operated by the remote controller, call your nearest service center.
• Filter reset : When the filter reset indicator is turned on the indoor unit display, clean the filter and press the
Settings  <, > or Settings  (Filter Reset) blinking  SET button.
• Beep off : To silence the beep sound, press the Settings  <, > or Settings  (Beep) blinking  SET button. If
you press the Settings  <, > or Settings  (Beep) blinking  SET button again, the beep sound
will ring again.
Correct disposal of batteries in this product
(Applicable in countries with separate collection systems)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed
of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb
indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If
batteries are not properly disposed of, these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste and
recycle them through your local, free battery return system.
English-14
Basic operation
Basic operation is an operation mode that can be selected by pressing the Mode button.
Auto
Cool
Cool mode is frequently used and you can freely control the temperature, fan speed, and air flow direction in Cool mode.
ffWhen you select the Heat mode while the Cool mode is on, the Cool mode is cancelled.
Dry
The air conditioner in Dry mode acts like a dehumidifier by removing moisture from the indoor air. The Dry mode will provide
you with fresh air even on a rainy day.
Fan
Fan mode provides you with a breeze just like a fan to make fresh environment for you.
Heat (MR-EH00/MR-EH00U)
In Heat mode, you can warm your room even in the fall and winter.
ffThe fan may not commence immediately to avoid generating a cold breeze.
ffDuring the Heat mode, defrost operation may be performed to remove the frost formed on the outdoor unit. (When the
frost is removed by the defrost operation in Heat mode, steam is generated from the outdoor unit.)
ffIf you stop operating the air conditioner after heating operation, the fan will operate for some time to cool the indoor
unit.
ffWhen you select the Cool mode while the Heat mode is on, the Heat mode is cancelled.
NOTE
• When the outdoor temperature is low and humidity is high during the heat mode, the outdoor unit's heating
capacity may decrease due to the frost formed on the outdoor heat exchanger. The defrost operation removes
the frost formed on the heat exchanger of the outdoor unit for 5 ~ 12 minutes. During the defrost operation, the
indoor unit does not generate breeze in order to prevent cold breeze blowing out.
❋❋ The interval between the defrost operation can decrease depending on the amount of the frost formed on the
outdoor unit.
❋❋ The interval between defrost operation can also decrease by humidity level with rain or snow.
English-15
02 BASIC OPERATION
In Auto mode, the air conditioner will automatically adjust the temperature and fan speed to maintain your fresh
environment.
ffWhen the indoor temperature is too high, the powerful cool breeze is generated and when the indoor room becomes
cool enough, the soft breeze is generated.
Basic operation
Turning the air conditioner on
Press the
button to operate the air conditioner.
Selecting the operation mode
Press the
button to select an operation mode.
❋❋ Heat mode operates with MR-EH00/MR-EH00U model only.
Adjusting the temperature
Press the
button to adjust the temperature.
Auto
Temperature can be adjusted by 1 °C(1 °F) within the range of 18 °C(65 °F)~30 °C(86 °F).
Cool
Temperature can be adjusted by 1 °C(1 °F) within the range of 18 °C(65 °F)~30 °C(86 °F).
Dry
Temperature can be adjusted by 1 °C(1 °F) within the range of 18 °C(65 °F)~30 °C(86 °F).
Fan
Temperature cannot be adjusted.
Heat
Temperature can be adjusted by 1 °C(1 °F) within the range of 16 °C(61 °F) ~30 °C(86 °F).
Selecting the fan speed
Press the
Auto
Cool
Dry
Fan
Heat
button to adjust the fan speed.
(Auto)
(Auto),
(Low),
(Med),
(Low),
(Med),
(High)
(Auto),
(Low),
(Med),
(High)
(Auto)
(High)
English-16
Selecting air flow direction
This function allows you to shift the air flow direction up and down or left and right.
ffWhen the blade reaches the desired position, press the
or
button one
more time to set the air flow direction. The up/down and left/right tilting of the
blade will stop.
❋❋ Duct type model cannot adjust air flow direction up and down.
❋❋
button not available on RAC.
Remote controller display
English-17
02 BASIC OPERATION
Press the
or
button to move the air flow direction up and down or left and right while
the air conditioner is turned on.
Setting the On/Off timer
You can set the air conditioner to be turned on or off automatically at desired time.
Setting the On timer
When the air conditioner is turned off.
1. Press the Timer button to select (On).
-- (On) indicator will keep blinking and you can set the time.
2. Press the < or > button to set the time.
-- You can set the time in half hour unit from 30 minutes (0.5 on the display) ~
3 hours and hour unit from 3 ~ 24 hours.
-- Time can be set from minimum 30 minutes to maximum 24 hours.
3. Press the SET button to complete the On timer setting.
-- (On) indicator and the set time of the timer will be displayed on the remote
controller display.
-- On timer setting will be cancelled if you don't press the SET button within
10 seconds after setting the time. Therefore, check for the (On) indicator on the
remote controller display.
Cancel
ffPress the Timer button  select (On)  press the < or > button 
set the timer to
 press the SET button.
Remote controller display
Additional options available in On timer
Select the mode from (Auto)  (Cool)  (Dry)  (Fan) and  (Heat).
❇❇ Heat mode operates with MR-EH00/MR-EH00U model only.
You can adjust the temperature after timer setting is completed.
Temperature adjustment is only available in Auto/Cool/Dry/Heat mode. In Fan mode, temperature cannot be
adjusted.
❇❇ Heat mode operates with MR-EH00/MR-EH00U model only.
NOTE
• When On timer setting is completed, the set status will be displayed for 3 seconds, and then only (On) indicator
will remain on the remote controller display thereafter.
English-18
Setting the Off timer
When the air conditioner is turned on
ffPress the Timer button  select (Off)  press the < or > button 
set the timer to
 press the SET button.
Cancel
NOTE
• Only the latest setting timer will be applied between the Off Timer and
good’ sleep off timer functions.
Remote controller display
Combining On timer and Off timer
When the air conditioner is turned off
When the air conditioner is turned on
When set time on On timer is shorter than Off timer
e.g. On timer: 3 hours, Off timer: 5 hours
• The air conditioner will be turned on after 3 hours from the
moment you have set the timer and the air conditioner will
remain on for 2 hours and then be turned off automatically.
NOTE
When set time on On timer is longer than Off timer
e.g. On timer: 3 hours, Off timer: 1 hour
• The air conditioner will be turned off after 1 hour from the
moment you have set the timer and will be turned on after
2 hours from the moment it was turned off.
• Set time for the On timer and the Off timer should be different from each other.
• When the On timer or the Off timer is set, setting can be cancelled by pressing the Power button.
English-19
03 TIMER
1. Press the Timer button to select (Off).
-- (Off) indicator will keep blinking and you can set the time.
2. Press the < or > button to set the time.
-- You can set the time in half hour unit from 30 minutes (0.5 on the display) ~
3 hours and hour unit from 3 ~ 24 hours.
-- Time can be set from minimum 30 minutes to maximum 24 hours.
3. Press the SET button to complete the Off timer setting.
-- (Off) indicator and the set time of the timer will be displayed on the remote
controller display.
-- Off timer setting will be cancelled if you don't press the SET button within
10 seconds after setting the time. Therefore, check for the (Off) indicator on the
remote controller display.
Setting the good’sleep mode
For a comfortable sleep, the air conditioner will operate in 3 stages in order of ‘Fall asleep  Sound sleep  Wake up’ stages.
When the air conditioner is operating in Cool mode;
1. Press the Timer button to select ( ).
-- (
) indicator will keep blinking and you can set the time.
2. Press the < or > button to set the time.
-- You can set the time in half hour unit from 30 minutes (0.5 on the display) ~
3 hours and hour unit from 3 ~ 12 hours.
-- Time can be set from minimum 30 minutes to maximum 12 hours.
-- Default time setting for the good'sleep mode is 8 hours.
3. Press the SET button to complete the good'sleep mode setting.
-- (
) indicator and the set time of the good'sleep mode will be displayed on
the remote controller display.
-- good'sleep mode will be cancelled if you don't press the SET button within
10 seconds after setting the time. Therefore, check for the (
) indicator on the
remote controller display.
Cancel
ffPress the Timer button  select ( )  press the < or > button 
set the timer to
 press the SET button.
Remote controller display
Additional options available in good'sleep mode
Temperature can be adjusted by 1 °C(1 °F) within the range of 18 °C(65 °F)~30 °C(86 °F).
English-20
Temperature and Fan speed change in good’sleep mode
NOTE
• Fan speed and the air flow direction will be adjusted automatically in good'sleep mode.
• Recommended set temperature is between 25 °C(77 °F) ~ 27 °C (81 °F) and 26 °C(79 °F) is the most ideal
temperature.
• If the set temperature is too low, you may feel cold during sleep or catch a cold.
• Optimal operation hour of good'sleep mode is 8 hours. Therefore, if the time is set too short or long, you may not
feel as comfortable as you would expect.
• If the good'sleep mode is set over 5 hours, Wake up stage will begin when 1 hour is remaining in the operation
time and the air conditioner will stop automatically.
• When the On timer and the good'sleep mode are set simultaneously, the air conditioner will only apply the
function that was set later.
• While good'sleep mode is operating, mode can be set additionally by pressing the Options button.
• If you press the Options button and select the Turbo/Quiet function, the good'sleep mode will be cancelled and
the selected mode will begin operation.
• If you press the Mode button, the good'sleep mode will be cancelled and the selected mode will begin
operation.
English-21
03 TIMER
1. Fall asleep mode : Provides you with comfortable environment for a good sleep by rapid cooling and hypnagogue
expedition breeze.
2. Sound sleep mode : The sound sleep mode adjusts temperature and air flow in waves to maintain healthy skin
temperature while it aids deep sleep. According to the change of good’ sleep operation hours, the sound sleep hour can
be longer or shorter.
3. Wake up from good’sleep mode : Provides you with the air flow that adjusts your body temperature to wake you up in a
fresh status.
Using the Turbo function
You can set the Turbo function to provide fast and powerful cooling (heating).
When the air conditioner is operating in Cool or Heat mode;
1. Press the Options button.
2. Press the <, > or Options button until (Turbo) indicator starts to blink.
3. Press the SET button to set the Turbo function.
-- (Turbo)  (Turbo) indicator will be displayed on the remote controller display
and Turbo function will operate for 30 minutes.
Cancel
NOTE
ffPPress the Options button  press the <, > or Options button to
make the (Turbo) indicator blink and press the SET button.
• Turbo function is only available in Cool/Heat mode.
❋❋ Heat mode operates with MR-EH00/MR-EH00U model only.
• If the Turbo function is selected while Quiet function is on, the Quiet
function will be cancelled.
• Air flow direction can be adjusted with every direction.
❋❋ Duct type model cannot adjust air flow direction up and down.
• Temperature and fan speed cannot be adjusted.
Remote controller display
English-22
Using the Purity function
Purity function will remove harmful materials in the air to provide you clean and healthy environment.
You can select this function additionally while the air conditioner is in operation.
When the air conditioner is turned on
ffPress the Options button  press the <, > or Options button to
make the ( ) indicator blink and press the SET button.
Cancel
NOTE
Remote controller display
• You may select the purity function additionally during Auto/Cool/Dry/
Heat mode and you can adjust the temperature.
❋❋ Heat mode operates with MR-EH00/MR-EH00U model only.
• If the purity function is selected additionally in fan mode, the temperature
cannot be adjusted.
• When the air conditioner and the purity function are turned on
simultaneously and you press the Power button, both air conditioner and
purity function will stop operation.
• You can still use the purity function when the On timer is set with the air
conditioner is turned off.
• There will not be much difference on energy consumption and operating
noise when the purity function is selected additionally while the air
conditioner is turned on.
When the air conditioner is turned off
1. Press the Options button.
2. Press the SET button when ( ) indicator blinks to begin purity function.
-- ( )  ( ) indicator will be displayed on the remote controller display and
Virus doctor function will begin.
Cancel
ffPress the Options button to make the (
the SET button.
Remote controller display
English-23
) indicator blink and press
04 OPTIONS
1. Press the Options button.
2. Press the <, > or Options button until ( ) indicator starts to blink.
3. Press the SET button to set the Purity function.
-- ( )  ( ) indicator will be displayed on the remote controller display and
Virus Doctor function will begin.
Selecting an indoor unit
You can select and operate individual indoor units out of 4 indoor units.
When the air conditioner is turned on
1. Press the Settings button.
2. Press the <, > or Settings button until (Zone) indicator starts to blink.
3. Press the SET button to select the indoor unit you want to operate.
-- You can select individual units in order (1~4) or select all indoor units at one time.
❋❋ Before Selectiing an Indoor unit ,you need setting indoor zone .Reference
installation manual 02 series installation option.
Remote controller display
Selecting a blade
You can select and operate individual blades out of 4 blades.
When the air conditioner is turned on
1. Press the button.
-- Blade 1234 will be displayed.
2. Press the Settings button.
3. Press the <, > or Settings button until (Blade) indicator starts to blink.
4. Press the SET button to select the blade you want to operate.
-- You can select the individual blades in order (1~4) or select all blades at one time.
❋❋
NOTE
button not available on RAC.
• To cancel the selected blade, press the
• When selecting the blade individually,
Remote controller display
English-24
button.
button will not work.
Cleaning the air conditioner
•Make sure to turn off the power of the indoor unit and cut-off
the power supply before cleaning the air conditioner.
Cleaning the indoor unit

Wipe the surface of the unit with a slightly damp micro fiber cloth when
needed.
• C
ontact the service center when you clean the indoor unit
heat exchanger because it needs to be disassembled.
• Since the panel of the indoor unit is easily scratched, you
should use a micro fiber cloth to clean the panel.
When you use the micro fiber cloth, slightly dampen the cloth
and remove any debris on the cloth to avoid scratches.
•Do not clean the display using alkaline detergent.
CAUTION •Do not use sulfuric acid, hydrochloric acid, organic solvents
(such as thinner, kerosene and acetone etc.) to clean the
surface of the product or put any stickers on it.
They may damage the surface of the air conditioner.
English-25
05 SETTINGS
CAUTION
Cleaning the air conditioner
Removing the Air filter
There is a hole on the bottom right side of the filter. Put your
finger in that hole to get a grip on the filter and slightly push it up
to release the hooks from the bottom side. Then, pull it down to
remove the filter from the main body.
Air filter
Cleaning the air filter
Washable foam based air filter captures large particles from the air. The filter is cleaned with a vacuum or by hand washing.
Remove the Air filter from the main body.
Clean the Air filter with a vacuum cleaner or soft brush.
If dust is too heavy, rinse it with running water.
Insert the Air filter back in its original position.
Dry the Air filter in a ventilated area.
• C
lean the Air filter every 2 weeks. Cleaning term may differ depending on the usage and environmental conditions.
In dusty area, clean it once a week.
• If the Air filter dries in a confined (or humid) area, odors may generate. If it occurs, re-clean and dry it in a
well-ventilated area.
• When the filter clean reminder is on, please press the 2nd F button and then press the Single User button on remote
controller.
English-26
Reassembling the Air filter
2. There’s one hook in both side of the filter, press the surface of
the Air filter softly and get the hooks into the main body. 
3. Press the bottom of the filter lightly to securely fix the main
body. 
English-27
Air filter
06 OTHERS
1. Put the filter on the main body and insert the hooks which are
in the top of the Air filter into the the main body. 
Maintaining the air conditioner
If the air conditioner will not be used for an extended period of time, dry the air conditioner to maintain it in best condition.
1.Dry the air conditioner thoroughly by operating in Fan mode for 3 to 4 hours
and cut-off the power supply. There may be internal damage if moisture is left
in components.
2.Before using the air conditioner again, dry the inner components of the air
conditioner again by running in Fan mode for 3 to 4 hours. This helps remove
odors which may have generated from dampness.
Periodical checks
Refer to the following chart to maintain the air conditioner properly.
Type
Every 2
weeks
Description
Clean the air filter (1)
Indoor
unit
Every 3
months
Every 4
months

Clean the condensate drain pan (2)

Thoroughly clean the heat exchanger (2)

Clean the cross fan (2)

Clean the condensate drain pipe (2)

Replace the remote controller batteries (1)

Clean the heat exchanger on the outside of the unit (2)
Outdoor
unit
Once a year

Clean the heat exchanger on the inside of the unit (2)

Clean the electric components with jets of air (2)

Verify that all the electric components are firmly
tightened (2)

Clean the fan (2)

Verify that all the fan assembly is firmly tightened (2)

Clean the condensate drain pan (2)

 : This check mark requires checking the indoor/outdoor unit periodically.
Follow the description to maintain the air conditioner properly.
(1) The described operations should be performed more frequently if
the area of installation is very dusty.
CAUTION
(2) These operations must always be performed by qualified personnel.
For more detailed information, see the installation part in the
manual.
English-28
Troubleshooting
Refer to the following chart if the air conditioner operates abnormally. This may save
time and unnecessary expenses.
SOLUTION
The air conditioner
does not work at all.
• Check power status and then operate the air conditioner again.
• Plug in or switch on the circuit breaker and then operate the air
conditioner again.
• Ensure Isolator is switch on.
• Check if you have set the Off Timer. Operate the air conditioner
again by pressing the Power button.
The temperature
adjustment is not
working.
• Check if you have selected Fan/Fast mode. In these modes, desired
temperature is set to auto and you cannot adjust the temperature.
Cool/Warm air does
not come out of the
air conditioner.
• Check if the set temperature is higher(during Cool mode)/
lower(during Heat mode) than the current temperature. Press the
Temp + or - button on the remote controller to change the set
temperature.
• Check if the Air filter is blocked by dirt. If there is a lot of dust on
the Air filter, cooling(heating) performance may decrease. Clean
them frequently.
• Check if the outdoor unit is covered or installed near the obstacle.
Take the cover off and take the obstacle away.
• Check if the air conditioner is operating in defrost mode. When the
ice formed in winter or the outdoor temperature is too low, the
air conditioner operates in defrost mode automatically. In defrost
mode, indoor fan stops and warm air does not come out.
• If the doors or windows are open, it may cause bad cooling
(heating) performance.
Close the doors and windows.
• Check if the air conditioner has just been turned on after stopping
cooling or heating operation. In this case, just a fan will run to
protect the outdoor unit compressor.
• Check if the pipe length is too long. When the pipe length exceeds
maximum allowable pipe length, cooling (heating) performance
may decrease.
Air flow adjustment
is not working.
• Check if you have selected
mode. In cool mode, you
mode is
cannot adjust the air flow direction. (If the
operating in Heat mode, you can adjust the air flow direction.)
English-29
06 OTHERS
PROBLEM
Troubleshooting
PROBLEM
SOLUTION
Fan speed
adjustment is not
working.
• Check if you have selected Auto/Dry/
mode. In these
mode, fan speed is set to Auto and you cannot adjust the fan
speed.
Remote controller is
not working.
• Check if your batteries are depleted.
• Make sure nothing is blocking your remote controller sensor.
• Check that there are strong lighting apparatus near the air
conditioner. Strong light which comes from fluorescent bulbs or
neon signs may interrupt the electric waves.
Timer function does
not set.
• Check if you press the Set/Cancel button on the remote
controller after you have set the time.
The indicator
is blinking
continuously.
• Press the Power button or disconnect the power plug/switch
off the auxiliary power switch.
If the indicator is still blinking, contact the service center.
Odors permeate in
the room during
operation.
• Check if the appliance is running in a smoky area. Ventilate the
room or operate the air conditioner in Fan mode for 1~2 hours.
(We do not use smelly components in the air conditioner.)
• Check the Drains have been cleared Regular Maintenance.
Error is indicated.
• When an indoor unit indicator blinks, contact the nearest service
center. Please ensure the error code is passed onto the service
center when booking the service call.
Noise is generated.
• Depending on the status of the air conditioner usage, noise can
be heard when refrigerant flow movement changes. It is normal.
Smoke is generated
from the outdoor
unit.
• If may not be a fire but it can be a steam generated by the defrost
operation from outdoor heat exchanger during Heat mode in
winter.
Water is dropping
• Water may be generated because of the temperature difference.
from the outdoor unit
It is normal.
piping connection.
English-30
Instruction for packing and unpacking the unit
06 OTHERS
► Packing the unit as below procedure
1. Assemble Cushion Left and Cushion Right to the both sides of indoor unit.
2. Place the Pad-Cushion on the both front and back of the Indoor Unit.
3. Open the Packing Case and entirely wrap the set up from the side of it.
4. Seal the Packing Case by adhesive tape.
► Unpacking the unit as below procedure
1. Peel adhesive tape off from the Packing Case.
2. Open the Packing Case and move the set.
3. Disassemble Cushion Left and Cushion Right from the both sides of indoor unit.
Technical Specifications
MODEL
AM015JNVDEH/TK
CLIMATES CLASS
RATED VOLTAGE & FREQUENCY
RATED CURRENT
RATED POWER INPUT
COOLING
T3
220 - 240 V~ 50 Hz
0.12 A
HEATING (H1)
COOLING
0.12 A
AM022JNVDEH/TK
T1
T3
220 - 240 V~ 50 Hz
0.13 A
0.13 A
14.00 W
HEATING (H1)
COOLING
EER
T1
14.00 W
15.00 W
16.00 W
15.00 W
18.00 W
-
-
HEATING (H1)
0.13 A
0.15 A
-
-
-
-
NET WEIGHT
8.1 kg
8.1 kg
DIMENSIONS OF THE UNIT [W×H×D]
750×249×246 mm
750×249×246 mm
COUNTRY OF ORIGIN
MADE IN CHINA
MADE IN CHINA
MODEL
AM028JNVDEH/TK
AM036JNVDEH/TK
CLIMATES CLASS
RATED VOLTAGE & FREQUENCY
RATED CURRENT
RATED POWER INPUT
EER
COOLING
T1
T3
220 - 240 V~ 50 Hz
0.13 A
HEATING (H1)
COOLING
HEATING (H1)
T3
220 - 240 V~ 50 Hz
0.15 A
0.19 A
16.00 W
HEATING (H1)
COOLING
0.13 A
T1
0.15 A
0.20 A
16.00 W
20.00 W
-
-
24.00 W
-
20.00 W
28.00 W
-
-
NET WEIGHT
8.2 kg
9.8 kg
DIMENSIONS OF THE UNIT [W×H×D]
750×249×246 mm
826×261×261 mm
COUNTRY OF ORIGIN
MADE IN CHINA
MADE IN CHINA
English-31
Technical Specifications
MODEL
AM045JNVDEH/TK
CLIMATES CLASS
RATED VOLTAGE & FREQUENCY
RATED CURRENT
RATED POWER INPUT
COOLING
T3
220 - 240 V~ 50 Hz
0.24 A
HEATING (H1)
COOLING
AM056JNVDEH/TK
T1
T3
220 - 240 V~ 50 Hz
0.24 A
0.21 A
31.00 W
27.00 W
0.31 A
31.00 W
HEATING (H1)
COOLING
EER
T1
0.29 A
41.00 W
27.00 W
37.00 W
-
-
HEATING (H1)
0.21 A
-
-
-
-
NET WEIGHT
9.8 kg
14.6 kg
DIMENSIONS OF THE UNIT [W×H×D]
826×261×261 mm
1065×301×294 mm
COUNTRY OF ORIGIN
MADE IN CHINA
MADE IN CHINA
MODEL
AM071JNVDEH/TK
CLIMATES CLASS
RATED VOLTAGE & FREQUENCY
RATED CURRENT
RATED POWER INPUT
EER
COOLING
T1
T3
220 - 240 V~ 50 Hz
0.31 A
HEATING (H1)
COOLING
HEATING (H1)
T3
220 - 240 V~ 50 Hz
0.42 A
0.41 A
41.00 W
HEATING (H1)
COOLING
0.31 A
AM082JNVDEH/TK
T1
0.42 A
0.55 A
41.00 W
55.00 W
53.00 W
-
55.00 W
72.00 W
-
-
-
-
-
NET WEIGHT
14.6 kg
14.6 kg
DIMENSIONS OF THE UNIT [W×H×D]
1065×301×294 mm
1065×301×294 mm
COUNTRY OF ORIGIN
MADE IN CHINA
MADE IN CHINA
English-32
06 OTHERS
English-33
QUESTIONS OR COMMENTS?
COUNTRY
CALL
U.A.E
800-SAMSUNG (800 - 726 7864)
OMAN
800-SAM CS (800-72627)
KUWAIT
183-CALL (183-2255)
BAHRAIN
8000-GSAM (8000-4726)
QATAR
800-CALL (800-2255)
EGYPT
08000-7267864
16580
ALGERIA
3004
TUNISIA
80 1000 12
MOROCCO
080 100 22 55
PAKISTAN
0800-Samsung (72678) JORDAN
0800-22273
06 5777444
SYRIA
962 5777444
Lebanon
1299
OR VISIT US ONLINE AT
www.samsung.com/ae/support (English)
www.samsung.com/ae_ar/support (Arabic)
www.samsung.com/eg/support
www.samsung.com/n_africa/support
www.samsung.com/pk/support
www.samsung.com/levant/support
Iraq
80010080
IRAN
021-8255 [CE]
021-42132 [HHP]
www.samsung.com/iran/support
SAUDI ARABIA
(+966) 8002474357 (800 24/7 HELP)
www.samsung.com/sa/home
www.samsung.com/sa_en
Israel
*6963
www.samsung.com/il/support/
TURKEY
444 77 11
www.samsung.com/tr/support
RUSSIA
8-800-555-55-55
(VIP care 8-800-555-55-88)
www.samsung.com/ru/support
GEORGIA
0-800-555-555
www.samsung.com/support
ARMENIA
0-800-05-555
www.samsung.com/support
AZERBAIJAN
0-88-555-55-55
www.samsung.com/support
KAZAKHSTAN
8-10-800-500-55-500
(GSM: 7799, VIP care 7700)
www.samsung.com/kz_ru/support
UZBEKISTAN
00-800-500-55-500 (GSM: 7799)
www.samsung.com/support
KYRGYZSTAN
00-800-500-55-500 (GSM: 9977)
www.samsung.com/support
TAJIKISTAN
8-10-800-500-55-500 (GSM: 8888)
www.samsung.com/support
MONGOLIA
1800-25-55
www.samsung.com/support
UKRAINE
0-800-502-000
www.samsung.com/ua/support (Ukrainian)
www.samsung.com/ua_ru/support (Russian)
BELARUS
810-800-500-55-500
www.samsung.com/support
MOLDOVA
0-800-614-40
www.samsung.com/support
INDONESIA
021-5699-7777
0800-112-8888 (All Product, Toll Free)
0800-112-7777 (Only for HHP, Toll Free)
www.samsung.com/id/support
AR✴✴FSSSBWK
AMJNVDSeries
Series
AR✴✴FSSSCUR Series
Air Conditioner
Conditioner
Air
user &user
installation
manualmanual
This manual is made with 100% recycled paper.
imagine the possibilities
Thank
thisthis
Samsung
product.
Thankyou
youfor
forpurchasing
purchasing
Samsung
product.
DB68-04987A-07
Download PDF