Samsung | SGH-P850 | Samsung SGH-P850 User guide

SGH-P850
User’s Guide
* Your phone may not appear exactly as the phone image above.
Drive safely at all times
Do not use a hand-held phone while driving. Park
the vehicle first.
Important
safety
precautions
Failure to comply with the following
precautions may be dangerous or illegal.
Switch off the phone when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switch off in an aircraft
Wireless phones can cause interference. Using
them in an aircraft is both illegal and dangerous.
Switch off the phone near all medical
equipment
Hospitals or health care facilities may be using
equipment that could be sensitive to external radio
frequency energy. Follow any regulations or rules
in force.
Keep your phone away from small children
All wireless phones may be subject to interference,
which could affect their performance.
Keep the phone and all its parts, including accessories,
out of the reach of small children.
Be aware of special regulations
Accessories and batteries
Meet any special regulations in force in any area and
always switch off your phone whenever it is forbidden
to use it, or when it may cause interference or danger.
Use only Samsung-approved accessories and
batteries. Use of any unauthorised accessories could
damage your phone and may be dangerous.
Water resistance
Your phone is not water-resistant. Keep it dry.
Sensible use
Use only in the normal position (held to the ear). Avoid
unnecessary contact with the antenna when the phone
is switched on.
Emergency call
Key in the emergency number for your present
location, then press
.
Important safety precautions
Interference
• The phone could explode if the battery is replaced
with an incorrect type.
• Dispose of used batteries according to the
manufacturer’s instructions.
Qualified service
Only qualified service personnel may repair your
phone.
For more detailed safety information, see "Health and
safety information" on page 99.
1
About this Guide
This User’s Guide provides you with condensed
information about how to use your phone. To quickly
learn the basics for your phone, please refer to “Get
started” and “Step outside the phone.”
In this guide, the following instruction icons appear:
Indicates that you need to pay careful attention
to the subsequent information regarding safety
or phone features.
Indicates that you can get more information on
the referenced page.
→
Indicates that you need to press the Navigation
keys to scroll to the specified option and then
select it.
[
]
< >
2
Indicates a key on the phone.
]
For example, [
Indicates a soft key, whose function is displayed
on the phone screen. For example, <Menu>
•
Camera and camcorder
Use the camera module on your
phone to take a photo or record a
video.
Special features of your phone
•
MP3 player
Play MP3 music files using your
phone as an MP3 player.
•
Bluetooth
Send photos, images, videos, and
other personal data, and connect to
other devices using free, wireless
Bluetooth technology. You can also
use a Bluetooth stereo headset to
let you enjoy music with high
quality stereo sound.
•
•
•
Phone to TV
View photos and video clips
captured with the phone on your TV
screen.
Image editor
Crop, resize, rotate, and decorate
your photos.
Get Personal with photo caller
ID
See who’s calling you when their
very own photo displays.
•
Name card
Create name cards with your
number and profile.
•
Multimedia Message Service (MMS)
Send and receive MMS messages with a
combination of text, images, video, and audio.
•
E-mail
Send and receive e-mails with images, video, and
audio attachments.
•
Java game
Enjoy Java™-based embedded
games and download new games.
•
Calendar
Keep track of your daily, weekly,
and monthly schedule.
•
Voice recorder
Record memos or sounds.
Special features of your phone
•
Web browser
Access the wireless web to get updo-the-minute information and a
wide variety of media content.
3
Contents
Unpack
6
Make sure you have each item
Your phone
6
Buttons, features, and locations
Get started
7
First steps to operating your phone
4
Browse on the web .................................................
Use Phonebook ......................................................
Send messages ......................................................
View messages.......................................................
Use Bluetooth ........................................................
Watch the phone display on a TV ..............................
Use a memory card.................................................
18
18
19
21
22
23
25
Enter text
27
T9, ABC, Number, and Symbol modes
Call functions
Install and charge the phones.................................... 7
Power on or off........................................................ 8
Keys and display ..................................................... 9
Access menu functions ............................................ 11
Customise your phone............................................. 12
Make/Answer calls .................................................. 14
Advanced calling features
Step outside the phone
Help and personal needs
14
Menu functions
30
34
All menu options listed
Solve problems
Begin with your camera, the MP3 player, the web, and other
special features
Health and safety information
Use the camera ...................................................... 14
Play MP3s .............................................................. 17
Index
97
99
106
Overview of menu functions
To access Menu mode, press <Menu> in Idle mode.
1 Call records
p.34
3 Applications
p.41
5 Messages
p.53
8 Camera
p.79
1
2
3
4
5
6
7
p.34
p.35
p.35
p.35
p.35
p.35
p.36
1 MP3 player
2 Voice recorder
3 Image editor
4 Java world
5 World time
6 Alarm
7 Calculator
8 Convertor
9 Timer
10 Stopwatch
11 SIM AT*
p.41
p.44
p.45
p.46
p.47
p.47
p.48
p.49
p.49
p.50
p.50
1
2
3
4
5
6
7
p.54
p.57
p.61
p.62
p.62
p.68
p.68
1
2
3
4
p.79
p.82
p.85
p.85
4 Browser
p.50
1
2
3
4
5
6
p.50
p.51
p.52
p.52
p.52
p.53
Recent contacts
Missed calls
Dialled calls
Received calls
Delete all
Call time
Call costs*
2 Phonebook
p.36
1
2
3
4
5
6
7
8
9
p.36
p.37
p.38
p.38
p.39
p.39
p.40
p.40
p.40
Contact list
FDN list
Add new contact
Group
Speed dial
My name card
Own number
Management
Service number*
Home
Bookmarks
Go to URL
Clear cache
Profile settings
Current profile
Create new message
My messages
Templates
Delete all
Settings
Broadcast messages
Memory status
6 File manager
p.68
1
2
3
4
5
6
7
p.69
p.70
p.71
p.72
p.73
p.75
p.75
Images
Videos
Music
Sounds
Other files
Memory card**
Memory status
7 Calendar
p.75
1 Month view
2 Week view
3 Day view
p.75
p.78
p.78
Take a photo
Record video
Go to photos
Go to videos
9 Settings
p.86
1
2
3
4
5
6
7
8
9
p.86
p.86
p.88
p.89
p.90
p.93
p.95
p.97
p.97
Time & Date
Phone settings
Display settings
Sound settings
Network services
Bluetooth
Security
Memory status
Reset settings
* Shows only if supported by your
SIM card.
** Shows only if a memory card
is inserted into the phone.
5
Unpack
Your phone
Make sure you have each item
Buttons, features, and locations
Earpiece
Speaker
Phone
Travel Adapter
Main display
External
display
Confirm key
Battery
User’s Guide
Left soft key
You can obtain various accessories from
your local Samsung dealer.
Headset jack
Dial key
The items supplied with your phone and
the accessories at your Samsung dealer
may vary, depending on your country or
service provider.
Alphanumeric
keys
Memory
card slot
Special
function keys
6
Navigation keys
(Up/Down/Left/
Right)
Right soft key
Power on/off/
Menu exit key
Delete key
Microphone
Camera lens
Camera flash
Volume/
Zoom keys
MENU key
CAMERA key
Get started
Install the battery.
First steps to operating your phone
Plug the travel adapter
into the phone.
SIM card information
When you subscribe to a cellular network, you receive
a plug-in SIM (Subscriber Identity Module) card
loaded with your subscription details, such as your
PIN, and available optional services.
Install and charge the phones
Remove the battery.
Insert the SIM card.
Plug the adapter into a standard AC wall outlet.
When the phone is completely charged (the
battery icon becomes still), unplug the adapter
from the power outlet.
If the phone is already
on, first turn it off by
pressing and holding
[
].
Make sure that the goldcoloured contacts on the
card are face down.
7
Get started
Remove the adapter from the phone.
Power on or off
Power on
1. Open the phone.
2. Press and hold [
the phone.
Low battery indicator
When the battery is low:
• a warning tone sounds,
• the battery low message displays, and
• the empty battery icon
blinks.
If the battery level becomes too low, the phone
automatically turns off. Recharge your battery.
8
] to turn on
Do not turn on the
phone when
mobile phone use
is prohibited.
3. If necessary, enter the PIN and
press <OK>.
Power off
1. Open the phone.
2. Press and hold [
].
Keys and display
Keys
In Idle mode, access your favourite menus
directly.p. 86
In Menu mode, scroll through menu options.
In Idle mode, launch the web browser.
In Menu mode, select the highlighted menu
option or confirm input.
Make or answer a call.
In Idle mode, retrieve numbers recently
dialled, missed, or received.
Delete characters from the display or an
item in an application.
Press and hold to switch the phone on and
off.
End a call.
In Menu mode, cancel input and return the
phone to Idle mode.
Get started
Perform the function indicated on the bottom
line of the display.
Enter numbers, letters, and some special
characters.
In Idle mode, press and hold [1] to access
your voicemail server. Press and hold [0] to
enter an international call prefix.
Enter special characters.
In Idle mode, press and hold [ ] to activate
or deactivate Quiet mode. Press and hold
[ ] to enter a pause between numbers.
Adjust the phone volume.
In Idle mode, with the phone open, adjust
the keypad tone volume. With the phone
closed, press and hold to turn on the
backlight.
In Camera mode, zoom in or out.
In Camera mode, access camera options.
In Idle mode, access the Camera menu.
Press and hold to turn on the camera.
In Camera mode, take a photo or record a
video.
9
Get started
Display
Alarm setp. 47
Layout
Icons
display various icons.
Text and graphics
display messages,
instructions, and
information you enter.
Menu
Icons*
Contacts
Soft key function
indicators
show the current
functions assigned to
the soft keys.
New multimedia message
New e-mail
One of the message Inboxes full
New voicemail
Call diverting feature active
p. 90
Bluetooth activep. 93
Connected to Bluetooth
hands-free car kit or headset
Received signal strength
Memory card inserted
Call in progress
Synchronised with PC
Out of your service area; you
cannot send or receive calls
GPRS network
Home Zone, if registered for the
appropriate service
10
New text message
Call ringer set to vibratep. 89
Quiet mode
Battery power level
* Depending on your country or service provider, the
icons shown on the display may vary.
Access menu functions
The roles of the soft keys vary
depending on the function you are
using. The bottom line of the
display indicates their current role.
Select
1. Press a desired soft key.
2. Press the Navigation keys to
move to the next or previous
option.
Get started
Use the soft
keys
Select an
option
3. Press <Select> or [
] to
confirm the function displayed
or option highlighted.
Back
4. To exit, choose either of the
following methods:
• Press <Back> to move up
one level.
• Press [
] to return to Idle
mode.
Press the left soft Press the right soft
key to select the
key to return to the
highlighted option. previous menu level.
Use shortcuts
Press the number key
corresponding to the option you
want. For the index number 10 and
11, press [0] and [ ], respectively.
11
Get started
Customise your phone
Display
language
1. In Idle mode, press <Menu>
and select Settings → Phone
settings → Language.
2. Select a language.
Call ringer
melody
1. In Idle mode, press <Menu>
and select Settings → Sound
settings → Incoming call →
Ring tone.
2. Select a ringtone category.
3. Select a ringtone.
4. Press <Save>.
Idle mode
Wallpaper
You can set wallpaper for the idle
screen on each display.
For the main display:
1. In Idle mode, press <Menu>
and select Settings → Display
settings → Wallpaper → Main
display.
2. Select an image category.
3. Select an image.
For the external display:
1. In Idle mode, press <Menu>
and select Settings → Display
settings → Wallpaper →
Cover display.
2. Select an image type.
3. For Clock, select a clock type.
For Cover title, enter a
greeting and press [
].
12
Menu
shortcuts
You can set the Navigation keys to
function as shortcuts to access
your favourite menus.
1. In Idle mode, press <Menu>
and select Settings → Phone
settings → Short cut.
2. Select a key.
3. Select a menu to be assigned to
the key.
Quiet mode
You can switch the phone to Quiet
mode to avoid disturbing other
people with your phone sounds.
Press and hold [ ] in Idle mode.
Phone lock
You can protect the phone against
unauthorised use with a phone
password. The phone will require
the password on power-up.
Get started
For Wallpaper images, select
an image category and then an
image.
1. In Idle mode, press <Menu>
and select Settings →
Security → Change
password.
2. Enter the default password,
00000000, and press <OK>.
3. Enter a new 4- to 8-digit
password and press <OK>.
4. Enter the new password again
and press <OK>.
5. Select Phone lock.
6. Select Enable.
7. Enter the password and press
<OK>.
13
Make/Answer calls
Make a call
Step outside the phone
1. Enter an area code and phone
number.
Begin with your camera, the MP3 player, the web, and
other special features
2. Press [
Use the camera
].
3. To end the call, press [
Answer a call
1. When the phone is ringing,
press [ ].
2. To end the call, press [
Adjust the
volume during
a call
14
].
Take a photo
1. Open the phone.
2. Turn the display to the left and
close the phone, as shown.
].
Press [Volume].
The camera turns on and the
preview screen appears in
Landscape view.
5. Press [CAMERA] to take a
photo. The photo is saved in the
Photos folder.
Step outside the phone
3. Hold the phone horizontally, as
shown. Make sure that the lens
is not blocked by your fingers.
6. Press [CAMERA] to take
another photo.
View a photo
4. Aim the lens at the subject and
make any desired adjustments.
• Press [MENU] to access
camera options.p. 80
• Press [Volume] to zoom in
or out.
1. With the phone reversed, press
[MENU].
2. Scroll to Go to photos and
press [CAMERA].
3. Select the photo you want.
15
Step outside the phone
Record a video
16
1. Open the phone.
2. Turn the display to the left and
close the phone.
The camera turns on and the
preview screen appears in
Landscape view.
3. Hold the phone horizontally.
Make sure that the lens is not
blocked by your fingers.
4. To switch to Record mode,
press [MENU] and select
Record video.
5. Aim the lens at the subject and
make any desired adjustments.
• Press [MENU] to access
camera options.p. 83
• Press [Volume] to zoom in
or out.
6. Press [CAMERA] to start
recording.
7. Press [MENU] to stop
recording. The video clip is
saved in the Videos folder.
8. Press [CAMERA] to play back
the video clip.
Play a video
1. With the phone reversed, press
[MENU].
1. Scroll to Go to videos and
press [CAMERA].
2. Select the video you want.
Play MP3s
Create a play
list
Use these methods:
• Download from the wireless
webp. 50
• Download from a computer
using the optional Samsung PC
Studio Samsung PC Studio
User’s Guide
• Receive via Bluetoothp. 93
• Copy files to a memory card
and insert the card into the
phonep. 25
1. In Idle mode, press <Menu>
and select Applications →
MP3 player.
2. Press <Options> and select
Add music from → Phone or
Memory card.
Play MP3 files
Step outside the phone
Copy MP3 files
to the phone
3. Press [
] to select the files
you want and press <Add>.
1. From the MP3 player screen,
press [
].
2. During playback, use the
following keys:
•
: pauses or resumes
playback.
• Up: opens the play list.
• Left: returns to the previous
file. Moves backward in a
file when held down.
• Right: skips to the next file.
Skips forward in a file when
held down.
• Volume: adjusts the
volume.
• Down: stops playback.
17
Step outside the phone
Browse on the web
Use Phonebook
Using a built-in web browser, you can get easily access
the wireless web to get a variety of up-to-date
services and information and to download web
content.
Launch the
web browser
In Idle mode, press [
Navigate the
web
•
•
•
•
•
18
].
To scroll through browser items,
press [Up] or [Down].
To scroll page by page, press
[Volume].
To select an item, press <
>.
To return to the previous page,
press <Back> or [C].
To access options, press
<Menu> and select Menu, or
select
on the top of the
screen.
Add an entry
To the phone’s memory:
1. In Idle mode, enter a phone
number and press [
].
2. Select Phone → a number type.
3. Specify contact information:
First name, Last name, Mobile,
Home, Office, Fax, Other, Email,
Graphic ID, Ringtone, Group,
and Notes.
4. Press [
] or <Save> to
save the entry.
To the SIM card:
1. In Idle mode, enter a phone
number and press [
].
2. Select SIM.
3. Enter a name.
4. Press [
] or <Save> to
save the entry.
Find an entry
1. In Idle mode, press
<Contacts>.
3. Select an entry.
1. In Idle mode, press <Menu>
Send a text
and select Messages → Create
message (SMS)
new message → Text
message.
2. Enter the message text.
4. Scroll to a number, and press
[ ] to dial or press [
] to
edit contact information.
Create and
send a name
card
3. Press <Options> and select
Send only or Save and send.
4. Enter destination numbers.
1. In Idle mode, press <Menu>
and select Phonebook → My
name card.
2. Specify your contact
information.
3. Press <Save> to save the
name card.
4. To send the name card, press
<Options> and select Send
via → a sending method.
Step outside the phone
2. Enter the first few letters of the
name you want.
Send messages
5. Press [
] to send the
message.
Send a
multimedia
message
(MMS)
1. In Idle mode, press <Menu>
and select Messages → Create
new message → Multimedia
message.
2. Select Subject.
3. Enter the message subject and
press [
].
19
Step outside the phone
4. Select Picture & Video or
Send a
Sound.
multimedia
5. Add an image, video, or sound
message
file.
(MMS) (continued)
6. Select Message.
Send an e-mail
1. In Idle mode, press <Menu>
and select Messages → Create
new message → Email.
2. Select Subject.
3. Enter the e-mail subject and
press [
].
7. Enter the message text and
press [
].
4. Select Message.
8. Press <Options> and select
Send.
5. Enter the e-mail text and press
[
].
9. Enter destination numbers or
addresses.
6. Select File attach.
10. Press [
] to send the
message.
7. Add image, video, sound, music
files, or document files.
8. Press <Options> and select
Send.
9. Enter destination addresses.
10. Press [
20
] to send the e-mail.
View messages
1. In Idle mode, press <Menu>
and select Messages → My
messages → Inbox.
When a notification appears:
1. Press <View>.
2. Select the message from the
Inbox.
From the Inbox:
1. In Idle mode, press <Menu>
and select Messages → My
messages → Inbox.
2. Select an SMS message.
View a
multimedia
message
When a notification appears:
1. Press <View>.
2. Select the message from the
Inbox.
Step outside the phone
View a text
message
From the Inbox:
2. Select an MMS message.
View an e-mail
1. In Idle mode, press <Menu>
and select Messages → My
messages → Email box.
2. Select Check new mail.
3. Select an e-mail or a header.
4. If you selected a header, press
<Options> and select
Retrieve to view the body of
the e-mail.
21
Step outside the phone
Use Bluetooth
3. Enter a Bluetooth PIN or the
other device’s Bluetooth PIN, if
it has one, and press <OK>.
When the owner of the other
device enters the same code,
pairing is complete.
Your phone is equipped with Bluetooth technology,
enabling you to connect the phone wirelessly to other
Bluetooth devices and exchange data with them, talk
hands-free, or control the phone remotely.
Turn on
Bluetooth
Search for and
pair with a
Bluetooth
device
In Idle mode, press <Menu> and
select Settings → Bluetooth →
Activation → On.
1. In Idle mode, press <Menu>
and select Settings →
Bluetooth → My devices →
Search new device.
2. Select a device.
Send data
1. Access an application,
Phonebook, File manager, or
Calendar.
2. Select an item.
3. Press <Options> and select
Send via → Bluetooth.
4. Select a device.
5. If necessary, enter the
Bluetooth PIN and press <OK>.
22
Receive data
If necessary, press <Yes> to
confirm that you are willing to
receive.
Watch the phone display on a TV
You can view the display of your phone on a screen by
connecting the phone and TV with a TV out cable. This
enables you to enjoy the photos, videos and music
stored in the phone’s memory with your family or
friends on a larger screen.
Important TV
information
•
•
•
Step outside the phone
To receive data via Bluetooth, your
phone’s Bluetooth feature must be
active and its visibility must be
enabled.
Depending on your particular
TV model, the location and
shape of the video input and
audio output ports may vary.
Match cable connector and TV
port colours.
Depending on the video system,
the image may vibrate or in
some other way be less than
optimal.
Depending on the image or
video quality, some image or
video files may not display.
23
Step outside the phone
•
•
You cannot use the Bluetooth
stereo headset or the zooming
feature in TV Out mode.
When you receive a call while in
TV Out mode, the phone will not
display the caller’s information
and will play the default
ringtone, not the specified call
ringer, to protect the other
person’s privacy.
Transfer
phone display
to a TV
1. With the TV switched on,
connect your phone to the TV
with a TV out cable, as shown.
2. Switch the TV to External Input
mode.
The display switches to TV Out
mode and you can view the
phone’s display on the TV
screen.
3. If necessary, set the video
system for your TV in the TVout menu.p. 89
4. Access the application you want
and open files.
24
Use a memory card
•
You can use an optional microSD memory card to
enlarge your phone’s memory capacity.
• Frequent erasing and writing will
shorten a card’s lifespan.
• Removing the card from the
phone or turning the phone off
while data is being accessed or
transferred may result to loss of
data and/or damage to the card
or phone.
• Do not subject cards to strong
shocks.
Insert a
memory card
Step outside the phone
Important
memory card
information
•
Keep cards away from small
children or pets.
Do not expose cards in a place
subject to electrostatic
discharge and/or electrical
noise.
1. Slide a memory card into the
memory card slot, with the
label side face down.
2. Press the card until it locks into
place.
• Do not touch card terminals with
your fingers or metal objects. If
dirty, wipe the card with a soft
cloth.
25
Step outside the phone
Use a card
adapter
Using a card adapter and a USB
card reader/writer, you can read
the card on a computer.
1. Insert a memory card into a
card adapter, and then the
adaptor into a card reader/
writer.
2. Plug the USB connector of the
adapter into the USB port on
your computer.
3. Access the appropriate memory
disk and copy to and from the
card.
If a file name is more than 47
characters, the file will not display
on your phone. The number of
characters is subject to change
depending on the language or
symbols you use.
26
Enter text
T9, ABC, Number, and Symbol modes
You can enter text for some features, such as
Messages, Phonebook, or Calendar, using ABC mode,
T9 mode, Number mode, and Symbol mode.
Changing the text input mode
•
•
•
Press and hold [ ] to switch between T9 mode and
ABC mode.
Press [ ] to change case or switch to Number
mode.
Press and hold [ ] to switch to Symbol mode.
Using T9 mode
T9 is a predictive text input mode that allows you to
key in any character using single keystrokes.
Entering a word in T9 mode
1. Press [2] to [9] to start entering a word. Press
each key once for each letter.
Example: Press [4], [3], [5], [5], and [6] to
enter Hello.
T9 predicts the word that you are typing, and it
may change with each key that you press.
2. Enter the whole word before editing or deleting the
characters.
3. When the word displays correctly, go to step 4.
Otherwise, press [0] to display alternative word
choices for the keys that you have pressed.
For example, Of and Me use [6] and [3].
4. Press [ ] to insert a space and enter the next
word.
27
Enter text
Other T9 mode operations
Using ABC mode
•
Press the appropriate key until the character you want
appears on the display.
•
•
•
Press [1] to enter periods or apostrophes
automatically.
Press [ ] to insert a space.
Press the Navigation keys to move the cursor.
Press [C] to delete characters one by one. Press
and hold [C] to clear the entire display.
Adding a new word to the T9 dictionary
This feature may not be available for some languages.
1. Enter the word that you want to add.
2. Press [0] to display alternative words for your key
presses. When there are no more alternative
words, Spell displays on the bottom line.
3. Press <Spell>.
4. Enter the word you want using ABC mode and
press <Add>.
28
Key
Characters in order displayed
Upper case
Lower case
Other ABC mode operations
Using Symbol mode
•
Symbol mode enables you to insert symbols.
Using Number mode
To
Press
display more symbols
[Up] or [Down].
select a symbol
the corresponding
number key.
clear the entered symbols
[C].
insert the symbols
<OK>.
Enter text
•
•
•
To enter the same letter twice or to enter a
different letter on the same key, wait for the cursor
to move to the right automatically or press [Right].
Then, enter the next letter.
Press [ ] to insert a space.
Press the Navigation keys to move the cursor.
Press [C] to delete characters one by one. Press
and hold [C] to clear the display.
Number mode enables you to enter numbers.
Press the keys corresponding to the digits you want.
29
Redialling recent numbers
Call functions
1. In Idle mode, press [ ] to display the list of
recent numbers.
2. Scroll to the number you want and press [ ].
Advanced calling features
Making a call
1. In Idle mode, enter the area code and phone
number.
• Press [C] to clear the last digit or press and
hold [C] to clear the whole display. You can
move the cursor to edit an incorrect digit.
• Press and hold [ ] to enter a pause between
numbers.
2. Press [ ].
3. To end the call, press [
].
Making an international call
1. In Idle mode, press and hold [0]. The + character
appears.
2. Enter the country code, area code, and phone
number, then press [ ].
30
Making a call from Phonebook
Once you have stored a number in Phonebook, you
can dial the number by selecting it from Phonebook.
p. 36
You can also use the speed dial feature to assign your
most frequently called numbers to specific number
keys. p. 39
You can quickly dial a number from the SIM card using
its location number assigned when stored.
1. In Idle mode, enter the location number for the
phone number you want and press [ ].
2. Press [Left] or [Right] to scroll through other
numbers.
3. Press <Dial> or [ ] to dial the number you want.
Viewing missed calls
When you receive an incoming call, the phone rings
and displays the incoming call image.
If you have missed calls, the screen displays how
many calls you have missed.
1. Press <View>.
2. If necessary, scroll through the missed calls.
3. Press [ ] to dial the number you want.
Press <Accept> or [
] to answer the call.
Tips for answering a call
•
•
•
•
When Anykey answer is active, you can press
any key, except <Reject> and [ ].p. 87
When Active folder is active, you can simply open
the phone.p. 87
Press <Reject> or [ ] to reject a call.
Press and hold [Volume] to reject a call or mute
the call ringer, depending on the Volume key
setting.p. 87
Call functions
Answering a call
Using the headset
Use the headset to make or answer calls without
holding the phone.
Connect the headset to the jack on the left side of the
phone. The button on the headset works as follows:
To
Press
redial the last call
the button and then press
and hold it again.
answer a call
and hold the button.
end a call
and hold the button.
31
Call functions
Options during a call
5. To end the current call, press [
You can access a number of functions during a call.
Answering a second call
Adjusting the volume during a call
Press <Hold> or <Retrieve> to place a call on hold
or retrieve the call.
You can answer an incoming call while already on the
phone, if your network supports it and you have
activated the call waiting feature.p. 92
1. Press [ ] to answer the call. The first call is
automatically put on hold.
2. Press <Swap> to switch between the calls.
3. Press <Options> and select End held call to end
the call on hold.
4. To end the current call, press [ ].
Making a second call
Using the speakerphone feature
You can make another call if your network supports it.
1. Press <Hold> to put the call on hold.
2. Make the second call in the normal way.
3. Press <Swap> to switch between the calls.
4. Press <Options> and select End held call to end
the call on hold.
Press [
Press [
Use [Volume] to adjust the earpiece volume during a
call.
Press [Volume up] to increase the volume level and
[Volume down] to decrease the volume level.
Placing a call on hold/Retrieving
32
].
Use the phone as a speakerphone to talk and listen
with the phone a short distance away.
] to activate the speakerphone feature.
] again to switch back to the earpiece.
Using In-call options
To communicate with answering machines or
computerised telephone systems, Send keys
must be selected.
•
•
•
•
•
Phonebook: access the contact list.
•
Send DTMF: send the DTMF (Dual tone multifrequency) tones as a group. The DTMF tones are
the tones used in phones for tone dialling,
sounding when you press the number keys. This
option is helpful for entering a password or an
account number when you call an automated
system, like a banking service.
Message: create a new SMS message or access
the messages in the Inbox.
Join: set up a multi-party call by adding a caller
on hold to a currently active call. You can include
up to five people on a multi-party call.
Split: have a private conversation with one multiparty call participant. The other participants can
converse with each other. After the private
conversation, select Join to return both all private
participants to the multi-party call.
Transfer: transfer the currently active call to a
caller on hold. The two callers can talk to each
other but you are disconnected from the call.
Call functions
Press <Options> to access the following options
during a call:
• Voice clarity on/Voice clarity off: remove
extraneous noise and increases call quality so that
the person with whom you are speaking can hear
you clearly even if you are in a noise place.
• Mute/Unmute: switch off the phone's microphone
so that the other person on the phone cannot hear
you, or switch it back on.
• Mute keys/Send keys: switch the key tones off
or on.
33
•
•
•
•
Remove: disconnect one multi-party call
participant.
End held call: disconnect the call currently on
hold.
SIM service: access special services, such as
news, weather forecasts, entertainment, and
location services, provided by your SIM card. This
option is available when you use a SIM card
supporting SIM Application Toolkit menus.
Switch to headset/Switch to phone: switch the
call to a Bluetooth stereo headset or hands-free
car kit or back to the phone.
Menu functions
All menu options listed
Call records
(Menu 1)
Use this menu to view the calls you have dialled,
received, or missed, and the length of the calls. You
can also check the cost of your calls, if your SIM card
supports this function.
To access this menu, press <Menu> in Idle mode and
select Call records.
Recent contacts (Menu 1.1)
This menu displays the most recent calls dialled,
received, or missed.
Accessing a call record
1. Press [Left] or [Right] to move to another call
type.
2. Press [Up] or [Down] to scroll through the call list.
34
3. Press [
] to view the details of a call, or press
[ ] to dial a number.
Using call record options
This menu displays the most recent calls you did not
answer.
Dialled calls (Menu 1.3)
This menu displays the most recent calls you have
dialled.
Delete all (Menu 1.5)
Use this menu to delete all of the records in each call
type.
1. Press [
] to select the call types to be cleared.
2. Press <Delete>.
3. Press <Yes> to confirm the deletion.
Call records (Menu 1)
Missed calls (Menu 1.2)
This menu displays the most recent calls you have
received.
Menu functions
While viewing call details, press <Options> to access
the following options:
• Save as contacts: save the number to
Phonebook.
• Send message: send an SMS or MMS message to
the selected number.
• Delete: delete the selected call record or all
records.
Received calls (Menu 1.4)
Call time (Menu 1.6)
This menu displays the time log for calls made and
received. The actual time invoiced by your service
provider will vary.
• Last call time: check the length of your last call.
• Total sent: check the total length of all the calls
you have dialled.
• Total received: check the total length of all the
calls you have received.
35
Menu functions
•
Reset timers: reset the call timers. You need to
enter the phone password.
The password is preset to 00000000. You can
change this password.p. 96
Call costs (Menu 1.7)
This network feature displays the cost of calls. This
menu is available only if supported by your SIM card.
Note that this is not intended to be used for billing
purposes.
• Last call cost: check the cost of your last call.
• Total cost: check the total cost of all of your calls.
If the total cost exceeds the maximum cost set in
Set max cost, you must reset the counter before
you can make another call.
• Max cost: check the maximum cost limit set in
Set max cost.
• Reset counters: reset the cost counters.
• Set max cost: set the maximum cost authorised
for your calls.
36
•
Price/Unit: set the price per unit that is applied
when the cost of your calls is calculated.
Phonebook
(Menu 2)
You can store phone numbers on your SIM card and in
your phone’s memory. The SIM card and phone’s
memory are physically separate, but they are used as
a single entity called Phonebook.
To access this menu, press <Menu> in Idle mode and
select Phonebook.
Contact list (Menu 2.1)
Use this menu to search for numbers in Phonebook.
Finding an entry
1. Enter the first few letters of the name that you
want to find.
2. Select the name from the list.
3. Scroll to a number, and press [ ] to dial or press
[
] to edit contact information.
FDN list (Menu 2.2)
While viewing contact details, press <Options> to
access the following options:
• Edit: edit contact information.
• Send message: send an SMS or MMS message to
the selected number, or an e-mail to the selected
e-mail address.
• Copy: copy the selected number to the phone’s
memory, SIM card, or FDN list.
• Send via: send the contact via SMS, MMS, e-mail,
or Bluetooth.
• Delete: delete the contact.
• Print via Bluetooth: print contact information via
a Bluetooth-compatible printer.
Use this menu to create a list of contacts to be used in
FDN (Fixed Dialling Number) mode, in which the
phone allows outgoing calls only to the specified
phone numbers, if your SIM card supports this
feature. You can activate FDN mode in the FDN mode
menu.p. 96
Menu functions
Using Phonebook options
Adding a contact
Phonebook (Menu 2)
1. From the FDN list screen, press <Options> and
select Add.
2. Enter your PIN2 and press <OK>.
3. Enter information about the contact.
• Name: assign a name.
• Phone number: enter a number.
• Location: assign a location number.
4. Press <Save> to save the contact.
Using contact options
You can access contact options by pressing
<Options> while viewing contact details. Refer to
“Using Phonebook options.”
37
Menu functions
Add new contact (Menu 2.3)
Storing a number on the SIM card
Use this menu to add a new contact to Phonebook.
1. Select SIM.
2. Enter information about the contact.
• Name: assign a name.
• Phone number: enter a number.
• Location: assign a location number.
Storing a number in the phone’s memory
1. Select Phone.
2. Change the settings or enter information about the
contact.
• First name/Last name: assign a name.
• Mobile/Home/Office/Fax/Other: add a
number in any type.
• Email: assign an e-mail address.
• Graphic ID: assign an image to alert you to a
call from the person.
• Ringtone: assign a ringtone to alert you to a
call from the person.
• Group: assign the contact to a caller group.
• Notes: add a memo about the person.
3. Press [
] or <Save> to save the contact.
38
To assign a caller ID image, ringtone, or group,
the contact must be saved to the phone’s
memory.
3. Press [
] or <Save> to save the contact.
Group (Menu 2.4)
Use this menu to organise your contacts in caller
groups.
Adding members to a caller group
1.
2.
3.
4.
Select a group.
Press <Add>.
Press [
] to select the contacts to be added.
Press <Add>.
Managing speed dial entries
While viewing the group list, press <Options> to
access the following options:
• View: display the members of the selected group.
• Add: add a new group.
• Edit: change the group properties.
• Send message: send an SMS, MMS, or e-mail
message to the group members you want.
• Delete: delete the selected group. Group
members, however, will not be deleted from
Phonebook.
From the Speed dial screen, press <Options> to
access the following options:
• Add: assign a number to an unassigned key.
• View: check the name and number assigned to a
key.
• Change: assign a different number to a key.
• Remove: clear the speed dial setting for a key.
Speed dial (Menu 2.5)
My name card (Menu 2.6)
Use this menu to assign speed dial numbers (2 to 9)
for 8 of your most frequently called numbers.
Use this menu to create a name card and send it to
other people.
Assigning speed dial numbers
Saving your name card
1. Select a key location from 2 to 9. Key 1 is reserved
for your voicemail server.
2. Select a contact from the contact list.
3. Select a number, if the contact has more than one
number.
The procedure for creating your name card is the
same as the one for saving a phone number in the
phone’s memory.p. 38
Menu functions
Managing caller groups
Phonebook (Menu 2)
Dialling speed dial numbers
In Idle mode, press and hold the appropriate key.
39
Menu functions
Using name card options
After saving your name card, press <Options> to
access the following options:
• Edit: edit the name card.
• Send via: send the name card via SMS, MMS,
e-mail, or Bluetooth.
• Exchange namecard: exchange name cards with
another person via Bluetooth.
• Remove: delete the name card.
• Print via Bluetooth: print your contact
information via a Bluetooth-compatible printer.
Own number (Menu 2.7)
Use this feature to check your phone numbers, or to
assign a name to each of the numbers. Changes made
here do not affect the actual subscriber numbers on
your SIM card.
Management (Menu 2.8)
Use this menu to manage Phonebook entries.
40
•
•
•
•
•
Default saving: select a default memory location
to save contacts. If you select Ask on saving, the
phone will ask you to select a memory location
each time you save a number.
Copy all to phone: copy all of the contacts stored
on the SIM card to the phone’s memory.
Sort by contacts: change the sort order of the
contact list.
Delete all: delete all of the contacts from your
phone’s memory, SIM card, or FDN list.
Memory status: check the number of contacts
you have stored in the phone’s memory, SIM card,
and FDN list.
Service number (Menu 2.9)
Use this menu to view the list of Service Dialling
Numbers (SDN) assigned by your service provider,
including emergency numbers and numbers for
directory enquiries. This menu is available if your SIM
card supports SDN.
1. Scroll to the number you want and press <View>.
2. Press <Dial> or [ ].
Applications
(Menu 3)
To access this menu, press <Menu> in Idle mode and
select Applications.
MP3 player (Menu 3.1)
To enjoy high quality music, you can use an optional
Bluetooth stereo headset.
Normal headsets are not compatible with the MP3
player.
Downloading or receiving music files
Use the following methods to save music files to your
phone’s memory:
• Download from the wireless webp. 50
The downloaded or received files are stored in the
Music folder.p. 71
Creating a play list
Applications (Menu 3)
Use this menu to enjoy music. First, you need to save
MP3 files in your phone’s memory.
•
•
Download from a computer using the optional
Samsung PC StudioSamsung PC Studio User’s
Guide
Receive via an active Bluetooth connectionp. 93
Copy to a memory card and insert the card into the
phone.p. 25
Menu functions
Use this menu to play music files, to record voice
memos, to edit photos, to play Java games, and to set
time zones and alarms. You can also use the phone as
a calculator, convertor, timer, and stopwatch.
•
1. From the MP3 player screen, press <Options>
and select Add music from → Phone or Memory
card.
2. Press [
] to select the files to be added.
3. Press <Add>.
Playing music files
1. From the MP3 player screen, press <Options>
and select Play via.
2. Select Phone to use the phone speaker.
41
Menu functions
Select A/V headset to use a Bluetooth stereo
headset and then search for and connect the
phone to the headset.
Key
Function
4
Turns 3D sound on or off.
5
Changes the skin type.
Function
6
Turns Shuffle mode on or off.
Pauses or resumes playback.
7
Marks the beginning and ends of the
section you want to repeat.p. 43
During playback, use the following keys:
Key
42
Left
Returns to the previous file. Moves
backward in a file when held down.
Right
Skips to the next file. Skips forward in a
file when held down.
Up
Opens the play list of the current
album.
Volume
Adjusts the volume.
Down
Stops playback.
1
Changes the equaliser mode.
2
Changes the playback animation.
3
Changes the repeat mode.
Using MP3 player options
During playback, press <Options> to access the
following options:
• Pause/Play: pause or resume playback.
• Transfer to A/V headset: switch the sound
output to a Bluetooth stereo headset.
• Open: access the play list of the current album, or
album list. On the album list, you can set up
multiple albums.
• Remove from play list: remove the selected file
from the play list.
•
You can select a section of the playing file and repeat
the section indefinitely.
1. During playback, press [7] to mark the beginning
of the section you want to repeat.
The marked section is coloured in the playback
progress bar.
Accessing the play list
From the MP3 player screen, press [Up].
Press <Options> to access the following options:
• Play via: play the currently selected file.
• Add music from: add files to the play list.
• Go to Album list: access the album list.
• Move to: move the selected file to another album.
• Copy to: copy the selected file to another album.
• Change order: move the selected file to the
position you want within the play list.
• Remove: remove the selected file or all files from
the play list.
• Properties: access the file properties.
43
Applications (Menu 3)
Repeating a section of a track
2. Press [7] again to mark the end of the section you
wish to repeat. The player repeats the marked
section.
3. To stop repeating, press [7].
Menu functions
•
Settings: change the default settings for playing
music files.
Repeat: select a repeat mode.
Shuffle: set the MP3 player to play music at
random.
Equalize: select an equaliser setting.
3D sound: turn 3D sound on or off.
Visualization: change the playback animation.
MP3 skin: select a skin type.
Volume: select a volume level.
Properties: access the file properties.
Menu functions
Voice recorder (Menu 3.2)
Key
Function
Use this menu to record voice memos. A voice memo
can be up to one hour long.
Left
Moves backward in a memo.
Right
Skips forward in a memo.
Volume
Adjusts the volume.
Down
Stops playback.
Recording a voice memo
1. Press [
] to start recording.
2. Speak into the microphone.
Press [
] to pause or resume the recording.
3. Press <Save> or [Down] to end recording. The
voice memo is saved automatically.
4. Press [
] to review the voice memo, or press
[Up] to record a new voice memo.
Playing a voice memo
1. From the Voice recorder screen, press <Options>
and select Go to voice list.
2. Select a voice memo.
During playback, use the following keys:
Key
Function
Pauses or resumes playback.
44
Changing voice recorder settings
You can change the default settings for the voice
recorder. Before recording a voice memo, press
<Options> and select Settings to access the
following options:
• Recording time: select a recording time.
1 hour: record a voice memo of up to one hour.
Limit of MMS: record a voice memo for adding to
an MMS message.
• Volume: select a volume level.
• Default name: change the default prefix for file
names.
• Visualization: select a playback animation.
Image editor (Menu 3.3)
Use this menu to edit your photos using various
editing tools.
Transforming
1. Select a photo or take a new photo, and press
<Load>.
2. Press <Options> and select Transform → an
option:
4.
5.
6.
7.
Adjusting an effect
Applications (Menu 3)
1. Press <Options> and select New image → Open
or Take a photo.
2. Select a photo or take a new photo, and press
<Load>.
3. Press <Options> and select Effects → an effect
option.
4. Press <Done>.
5. Press <Options> and select Save as.
6. Press <Yes>.
7. Enter a new file name and press [
].
Menu functions
Applying an effect
3.
• Rotate: rotate the photo 90 degrees.
• Flip: flip the photo.
Press the Navigation keys to rotate or flip the
photo.
Press <Done>.
Press <Options> and select Save as.
Press <Yes>.
Enter a new file name and press [
].
You can adjust the brightness, contrast, or colour.
1. Select a photo or take a new photo, and press
<Load>.
2. Press <Options> and select Adjust → an effect.
3. Press [Left] or [Right] to adjust the effect.
4. Press <Done>.
5. Press <Options> and select Save as.
6. Press <Yes>.
7. Enter a new file name and press [
].
45
Menu functions
Adding visual features
Accessing an embedded game
You can decorate photos by adding a frame or an
image.
1. Select a photo or take a new photo, and press
<Load>.
2. Press <Options> and select Insert → a feature
type.
3. Select an item to be inserted.
4. Adjust the position of the inserted item and press
<Done>.
5. Press <Options> and select Save as.
6. Press <Yes>.
7. Enter a new file name and press [
].
Select a game from the game list and follow the
onscreen instructions. The procedure may differ from
game to game.
Java world (Menu 3.4)
Use this menu to access the embedded Java games
and to change the network settings required for
accessing Java services.
46
Using Java application options
From the application list, press <Options> to access
the following options:
• Start: launch the application.
• Delete: delete the application.
• Properties: access the application properties.
• Permission: set permission settings for services
charging you additional costs, such as network
access and SMS.
• Upgrade: upgrade the application to the latest
version.
• Send information via SMS: send the URL
containing the application via SMS.
• Memory status: access memory information for
applications.
•
World time (Menu 3.5)
Use this menu to find out what time it is in another
part of the world.
Menu functions
Viewing world time
1. From the world map, press [Left] or [Right] to
scroll to the city you want. As the time line moves,
the time and date of the given zone display.
2. Press [
] to save the city as your local time
zone.
Applications (Menu 3)
Network settings: set up a connection profile to
be used for applications requiring network access.
APN: enter the access point name.
Login ID: enter the login ID.
Password: enter the login password.
Proxy: activate or deactivate the proxy server.
Depending on this setting, options in Proxy
settings vary.
Proxy settings: provide you with the following
options:
When the proxy is set to Enable:
- IP address: enter the IP address of the proxy
server.
- Port: enter the port number of the proxy server.
When the proxy is set to Disable:
- DNS1: enter the primary DNS address.
- DNS2: enter the secondary DNS address.
Applying daylight savings time
1. From the world map, press <Options> and select
Set daylight saving time.
2. Press [
] to select the time zones you want.
3. Press <Save>.
Alarm (Menu 3.6)
Use this menu to set alarms. The alert type for a
normal alarm corresponds to the call alert type
settings. A wake-up alarm is not affected by your
sound setting.
47
Menu functions
Setting an alarm
Deactivating an alarm
1. Select the type of alarm.
2. Set each alarm option:
• Alarm: activate the alarm.
• Alarm time: enter the time for the alarm to
sound.
• AM/PM: select AM or PM in 12-hour format.
• Alarm day: select the days on which the alarm
sounds. If you select Once alarm, the alarm
sounds at the specified time and then is
deactivated.
• Alarm tone: select an alarm tone.
3. Press <Save>.
1. Select the alarm you want to deactivate.
2. Select Off on the Alarm line.
3. Press <Save>.
Stopping an alarm
•
•
48
For a non-wake-up alarm, press any key.
].
For a wake-up alarm, press <Confirm> or [
Press any key, except <Confirm> and [
], to
cause it to sound again after 5 minutes. You can do
this a maximum of 5 times.
Setting an alarm to sound even if the phone is
off
From the Alarm screen, select Auto power → On.
If the phone is off when it is time for the alarm to ring,
the phone switches on and sounds the alarm.
Calculator (Menu 3.7)
Use this menu to perform basic arithmetic functions
such as addition, subtraction, multiplication, and
division.
1. Enter the first number.
• Press <.()> to insert a decimal point or
bracket.
• Press [ ] or [ ] to move the cursor.
2. Press one of the Navigation keys to access the
math function you want.
Convertor (Menu 3.8)
Use this menu for common conversions, such as
currency and temperature.
1. Select a convertor.
2. Press [Left] or [Right] to select the original unit
and press [Down].
3. Enter the value to be converted and press [Down].
• Press [ ] to insert a decimal point.
• Press [ ] to change the temperature to above
zero (+) or below zero (-).
4. Press [Left] or [Right] to select the unit to which
you want to convert.
The equivalent value for the amount you entered
displays.
Press <Options> to access the following options:
• Clear: clear the current values.
• Reverse: reverse the conversion.
• Currency rates: view the currency rate list.
Timer (Menu 3.9)
Use this menu to set a period of time for the phone to
count down. The phone will sound an alarm when the
specified period of time has expired.
Applications (Menu 3)
Performing a conversion
Using convertor options
Menu functions
3. Enter the second number.
4. Press [
] to view the result.
5. If necessary, repeat from step 2 to continue the
calculation.
Starting the timer
1. Press <Set>.
2. Enter the length of time you want to count down
and press <OK>.
3. Press [
] to start counting down.
Stopping the timer
•
•
Press any key when the timer sounds.
Press [
] on the Timer screen before the timer
sounds.
49
Menu functions
Stopwatch (Menu 3.10)
Browser
Use this menu to measure elapsed time. The
maximum time is 10 hours.
1. Press [
] to start the timer.
2. Press [
] to check an interval. You can repeat
this step for a total of 4 intervals.
The Wireless Application Protocol (WAP) browser on
your phone allows you to access the wireless web.
From the wireless web, you can access up-to-date
information and a wide variety of media content, such
as games, wallpapers, ringtones, and music files.
SIM AT (Menu 3.11)
To access this menu, press <Menu> in Idle mode and
select Browser.
This menu is available if you use a SIM AT card that
supports SIM Application Toolkit menus and provides
additional services, such as news, weather, sports,
entertainment, and location services. Available
services may vary, depending on your service
provider’s plans. For details, see your SIM card
instructions or contact your service provider.
(Menu 4)
Home (Menu 4.1)
Use this menu to connect your phone to the network
and load the homepage of the wireless web service
provider. You can also press [
] in Idle mode.
Navigating the web browser
To
50
Press
scroll through browser items
[Up] or [Down].
scroll page by page
[Volume].
select a browser item
<
>.
To
Press
return to the previous page
<Back> or [C].
•
•
•
Accessing other phone menus
•
Exiting the browser
Press [ ] to end the network connection and exit the
browser.
Browser (Menu 4)
From any web page, press <Menu> and select Menu,
or select
on the top of the screen to access the
following options:
• Back: return to the previous page.
• Home: return to the homepage.
• Exit: exit the browser.
• Reload: reload the current page with updated
information.
• Show URL: display the URL address of the current
page. You can also set the current page as the
homepage for the web browser.
• About...: access version and copyright information
about the browser.
Menu functions
Using browser menu options
Go to URL: enter a URL address manually.
Bookmarks: access the bookmark list.
Messages: access the messages you have
received. You can also create and send a new SMS
message.
File manager: access the File manager menu.
Bookmarks (Menu 4.2)
Use this menu to save URL addresses in order to
quickly access web pages.
Adding a bookmark
1. Select an empty location.
2. Enter a name for the bookmark and press [Down].
3. Enter a URL address and press [
].
From any web page, press [ ] to access the following
options:
51
Menu functions
Accessing a bookmarked page
Profile settings (Menu 4.5)
Selecting a bookmark item launches the web browser
and accesses the associated web page.
Use this menu to set up a connection profile to be
used for accessing the wireless web. Contact your
service provider for details about your setting options.
Using bookmark options
After saving an item, press <Options> to access the
following options:
• Go: access the bookmarked web page.
• Edit: edit the URL address and name of the
bookmark.
• Delete: delete the selected bookmark or all
bookmarks.
Go to URL (Menu 4.3)
Use this menu to manually enter a URL address and
access the associated web page.
Clear cache (Menu 4.4)
Use this menu to clear information stored in the cache.
A cache is a temporary memory that stores recently
accessed web pages.
52
For each profile, the following options are available:
• Profile name: enter a profile name.
• Home URL: enter the URL address of the page to
be used as your homepage.
• Bearer: select the network bearer type.
• Proxy: activate or deactivate the proxy server.
• GPRS settings: customise the following GPRS
network settings:
When the proxy is set to Enable:
Proxy IP: enter the IP address of the proxy
server.
Proxy port: enter the port number of the proxy
server.
APN: enter the access point name.
Login ID: enter the login ID.
Password: enter the login password.
When the proxy is set to Disable:
DNS1: enter the primary DNS address.
DNS2: enter the secondary DNS address.
Dial number: enter the PPP server phone number.
Login ID: enter the login ID.
Password: enter the login password.
Data call type: select a call type for data
transmission.
Messages (Menu 5)
Current profile (Menu 4.6)
Use this menu to select a connection profile to be used
for accessing the wireless web.
Messages
Menu functions
•
When the proxy is set to Disable:
DNS1: enter the primary DNS address.
DNS2: enter the secondary DNS address.
APN: enter the access point name.
Login ID: enter the login ID.
Password: enter the login password.
GSM settings: customise the following GSM
network settings:
When the proxy is set to Enable:
Proxy IP: enter the IP address of the proxy
server.
Proxy port: enter the port number of the proxy
server.
Dial number: enter the PPP server phone number.
Login ID: enter the login ID.
Password: enter the login password.
Data call type: select a call type for data
transmission.
(Menu 5)
Use the Messages menu to send and receive text
messages, multimedia messages, and e-mails. You
can also use push message, voicemail, and Cell
broadcast message.
To access this menu, press <Menu> in Idle mode and
select Messages.
53
Menu functions
Create new message (Menu 5.1)
Use this menu to create and send messages.
Text message (Menu 5.1.1)
Short Message Service (SMS) allows you to send or
receive text messages that may include simple
pictures, animated images, and melodies.
1. Enter your message.
The maximum number of characters allowed in a
message varies by service provider. If your
message exceeds the maximum number of
characters, the phone will split the message.
2. Press <Options> to access the following options:
• Send only: send the message.
• Save and send: save a copy of the message in
the Sentbox folder and send the message.
• Insert: insert a template, Phonebook entry, or
bookmark into text.
• Add picture/Add animation/Add melody:
add a simple image, animated image, or a
melody.
54
•
Attach: attach a Phonebook entry as a name
card or calendar data as a data format
attachment.
• Save to: save the message in the Draft or My
folder box.
• Language select: change the language used
in T9 input mode.
• Text style: change the text attributes.
3. When you have finished, press <Options> and
select Send only or Save and send.
4. Enter a destination number.
To send the message to more than one recipient,
fill in the destination fields.
5. Press [
] to send the message.
Multimedia message (Menu 5.1.2)
Multimedia Message Service (MMS) delivers messages
containing a combination of text, image, video, and
audio, from phone to phone or from phone to e-mail.
1. Select the Subject line.
2. Enter the message subject and press [
].
3. Select the Picture & Video or Sound line and add
an image, a video, or a sound file.
Messages (Menu 5)
4. Select the Message line.
5. Enter the message text and press [
].
6. Press <Options> to access the following options:
• Edit: edit the subject or text of your message.
• Change image/Change video/Change
sound: change an added item.
• Add image/Add video: add an image or
video.
• Preview: view the message as it will be shown
on the recipient’s phone.
• Send: send the message.
• Save to: save the message in the Draft or My
folder folder, or save it as a template.
Add page: add pages. Move to each page by
pressing [Left] or [Right] on the message
screen.
• Delete page: delete the added page.
• Edit page: change the duration of page display
or move the forward or backward among the
other pages.
• Attach: attach a Phonebook entry as a name
card, calendar data as a data attachment, or a
document files stored in the Other files folder.
• Remove subject/Remove media/Remove
sound/Remove message: remove an added
item.
7. When you have finished, press <Options> and
select Send.
8. Enter a phone number or e-mail address.
To send the message to more than one recipient,
fill in additional destination fields.
9. Press [
] to send the message.
Menu functions
• The maximum size allowed for a message can
differ depending on your service provider.
• Depending on the file type or DRM (Digital
Rights Management) system, some files may
not be able to be forwarded.
•
55
Menu functions
Email (Menu 5.1.3)
You can send and receive e-mails that include text,
audio, and images. To use this feature, you need to
subscribe to an e-mail service and set up your e-mail
account and profile.p. 66
1. Select the Subject line
2. Enter the subject of your e-mail and press [
].
3. Select the Message line
4. Enter the e-mail text and press [
].
5. Select the File attach line and access the
following options:
• Add image/Add videos/Add sounds/Add
music/Add other files: add images, videos,
sounds, music files, or document files.
• Add from memory card: access a memory
card, if inserted into the phone, and add files.
• Send: send the message.
• Save to: save the message in the Draft or My
folder box.
• Attach: add Phonebook entries as name cards
or calendar items.
56
6. After adding items, press <Options> to access
the following options:
• Edit: edit the subject or text.
• View: display or play the attached file.
• Add image/Add videos/Add sounds/Add
music/Add other files: add images, videos,
sounds, music files, or document files.
• Add from memory card: access a memory
card, if inserted into the phone, and add files.
• Send: send the message.
• Save to: save the message in the Draft or My
folder box.
• Attach: add Phonebook entries as name cards
or calendar items.
• Remove subject/Remove message: clear
the subject or text.
• Remove: delete the selected attachment or all
attachments.
• Remove all attachments: delete all
attachments.
7. When you have finished, press <Options> and
select Send.
My messages (Menu 5.2)
Use this menu to access messages you have received,
sent, or which have failed in sending.
This folder stores all of the messages you have
received, except for e-mails.
Viewing a message
The following icons may appear on the message list to
show the message type:
•
SMS
•
MMS notification
•
MMS
•
Push message from the web servers/
Configuration message, containing network
parameters from your service provider
Using message options
While viewing a message, press <Options> to access
the following options:
SMS messages
• Reply via: reply to the sender via SMS or MMS.
• Forward: forward the message to other people.
• Delete: delete the message.
• Move to phone/Move to SIM: move the
message between the SIM card and the phone’s
memory.
• Add to block list: add the sender’s number to the
Block list to reject the messages from the sender.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
Messages (Menu 5)
Inbox (Menu 5.2.1)
• According to the DRM (Digital Rights
Management) system, messages having web
content may not be able to be forwarded.
• A ! icon next to a message means that the
message is of high priority. A grey-coloured
message icon indicates low priority.
Menu functions
8. Enter an e-mail address.
To send the e-mail to more than one recipient, fill
in additional destination fields.
9. Press [
] to send the e-mail.
57
Menu functions
•
•
•
Cut media: save media content from the message
to your phone’s memory.
Print via Bluetooth: print the message via a
Bluetooth-compatible printer.
Protection: protect the message from being
deleted. You can protect only those messages
stored in the phone’s memory.
MMS notifications/MMS messages
• Retrieve: retrieve the MMS message from the
MMS server.
• Reply via SMS: reply to the sender via SMS.
• Reply via MMS to: reply to the sender via MMS.
• Forward: forward the message to other people.
• Delete: delete the message.
• Add to block list: add the sender’s number to the
Block list to reject the messages from the sender.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
58
•
•
Cut media: save media content from the message
to your phone’s memory.
Properties: access the message properties.
Push messages
• Go to URL: connect to the URL specified in the
message.
• Delete: delete the message.
• Cut address: extract URL, e-mail addresses, or
phone numbers from the message.
Delivery report
• Delete: delete the message.
Configuration messages
• Install: apply the configuration specified in the
message to your phone.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
• Print via Bluetooth: print the message via a
Bluetooth-compatible printer.
• Delete: delete the message.
This folder stores messages that the phone is
attempting to send or has failed to send.
While viewing the message list, press <Options> to
access the following options:
• View: view the message.
• Edit: edit the message.
• Send: send the message.
• Delete: delete the selected message or all
messages.
• Move to my folder: move the message to My
folder.
• Sort by: change the sort order of messages.
• Protection: protect the message from being
deleted.
• Properties: access the message properties.
While viewing a message, press <Options> to access
the following options:
• Open file: open the attached file.
• Save file: save the attached file in your phone’s
memory.
• Send again: resend the message.
• Forward: forward the message to other people.
• Delete: delete the message.
• Move to phone/Move to SIM: move the
message between the SIM card and the phone’s
memory.
• Print via Bluetooth: print the message via a
Bluetooth-compatible printer.
• Protection: protect the message from being
deleted.
• Properties: access the message properties.
Messages (Menu 5)
Outbox (Menu 5.2.3)
This folder stores messages you have saved to send at
a later time.
Menu functions
Draft (Menu 5.2.2)
59
Menu functions
60
Sentbox (Menu 5.2.4)
Email box (Menu 5.2.5)
This folder stores messages that you have sent.
This folder stores e-mails that you have received.
While viewing a message, press <Options> to access
the following options:
• Open file: open the attached file.
• Save file: save the attached file from the e-mail to
your phone’s memory.
• Forward: forward the message to other people.
• Delete: delete the message.
• Move to phone/Move to SIM: move the
message between the SIM card and the phone’s
memory.
• Print via Bluetooth: print the message via a
Bluetooth-compatible printer.
• Protection: protect the message from being
deleted.
• Properties: access the message properties.
Viewing an e-mail
1. Press <Select> when Check new mail
displays.The phone checks the e-mail server and
downloads new e-mails.
The following icons may appear on the list to show
the e-mail status:
•
Retrieved from the server
•
Being retrieved
•
Failed to retrieve
A ! icon next to an e-mail means that the
message is of high priority. A grey-coloured
message icon indicates low priority.
2. Select an e-mail or a header.
3. Press [Volume] to view other pages in the
e-mail.
Press and hold [Volume] to move to the first or last
page.
4. Press [ ] or [ ] to scroll to the next or previous
e-mail.
Using e-mail options
•
•
•
Print via Bluetooth: print the e-mail via a
Bluetooth-compatible printer.
Protection: protect the e-mail from being deleted.
Properties: access the e-mail properties.
Menu functions
My folder (Menu 5.2.6)
Use this menu to access the messages you have
moved using the Move to my folder option while
viewing a message list.
Templates (Menu 5.3)
Messages (Menu 5)
While viewing the e-mail or header, press <Options>
to access the following options:
• Retrieve: retrieve the body of the e-mail from the
e-mail server.
• Open file: open the attached file.
• Save file: save the attached file in your phone’s
memory.
• Reply to: send a reply to the sender or to the
sender and all of the recipients.
• Forward: forward the e-mail to other people.
• Delete: delete the e-mail from the phone’s
memory or from both the phone’s memory and the
e-mail server.
• Add to block list: add the sender’s e-mail
address or subject to the Block list to reject
e-mails from that address or containing that
subject.
• Cut address: extract URL, e-mail addresses, or
phone numbers from the e-mail.
Use this menu to make and use templates of
frequently used messages.
Text template (Menu 5.3.1)
You can create SMS templates with the sentences you
use frequently so that you can retrieve and insert
them when composing an SMS message.
Creating a template
1. Select an empty location.
2. Enter a message and press [
].
61
Menu functions
Using template options
Delete all (Menu 5.4)
From the template list, press <Options> to access
the following options:
• Edit: edit the template.
• Send message: create and send a new message
using the template.
• Delete: delete the template.
Use this menu to delete all messages in each message
folder or message type at once.
1. Press [
] to select the message folders or
message types to be cleared.
2. Press <Delete>.
3. Press <Yes> to confirm the deletion.
MMS Template (Menu 5.3.2)
Settings (Menu 5.5)
You can access embedded MMS templates or ones you
have saved so that you can use them in composing an
MMS message.
From the template list, press <Options> to access
the following options:
• View: open the template.
• Send message: send a new message using the
template.
• Edit: edit the template.
• Add new: add a new template.
• Delete: delete the selected template or all
templates, except for embedded ones.
62
Use this menu to set up various options for using the
messaging services.
Text message (Menu 5.5.1)
You can configure SMS settings.
• Send settings: set up the options for sending
SMS messages:
Reply path: allow recipients to reply to you
through your SMS server.
Delivery report: set the network to inform you
when your messages have been delivered.
You can configure MMS settings.
• Send settings: set up the options for sending
MMS messages:
Messages (Menu 5)
Multimedia message (Menu 5.5.2)
•
Delivery report: set the network to inform you
when your messages have been delivered.
Address hiding: set your address to be hidden
from the recipient’s phone.
Read reply: send a read-reply request along with
your messages.
Priority: set the priority level of messages.
Expiry date: set the length of time messages are
stored in the MMS server.
Delivery after: set a time delay before messages
are sent.
Send size: select a maximum size of attached
items allowed for messages.
Receive settings: set up the options for receiving
MMS messages:
Anonymous reject: reject messages from
unknown senders.
Advert allowed: accept advertisements.
Report allowed: set the network to inform the
sender when a message has been delivered to you.
Menu functions
•
Character support: select a character encoding
type. If you select Auto, the phone switches the
encoding type from GSM-alphabet to Unicode if
you enter a Unicode character. Use of Unicode
encoding will reduce the maximum number of
characters in a message to about half. If this menu
is not shown, your phone provides automatic
character encoding by default.
Validity period: set the length of time your
messages are stored in the SMS server.
Message type: set the default message type. The
network can convert messages into the selected
format.
Service centre: store or change the number of
your SMS server.
Block number: store the phone numbers from
which you want to reject messages.
63
Menu functions
•
64
Home reception: determine if your phone
retrieves new messages automatically when you
are in your home service area.
Roaming reception: determine if your phone
retrieves new messages automatically when you
are roaming on another network.
Reception within home network or abroad has the
following options:
- Automatic: the phone automatically retrieves
messages from the server.
- Reject: the phone rejects all messages.
- Manual: the phone displays notifications. Use
the Retrieve option to manually download new
messages.
MMS profiles: set up a connection profile and
select a profile to be used for MMS.
Current profile: select a profile.
Profile settings: customise the following options
for each profile:
- Profile name: enter a profile name.
- Server URL: enter the address of your MMS
server.
- Proxy: activate or deactivate the proxy server.
- GPRS settings: customise the settings required
for connecting to the GPRS network.
When the proxy is set to Enable:
IP address: enter the IP address.
Port: enter the port number.
APN: enter the access point name.
Login ID: enter the user ID.
Password: enter the password.
When the proxy is set to Disable:
DNS1: enter the primary DNS address.
DNS2: enter the secondary DNS address.
APN: enter the access point name.
Login ID: enter the login ID.
Password: enter the login password.
- Version: select an available OMA version and
maximum size limit for sending or receiving
messages.
•
Block number: store the phone numbers from
which you want to reject messages.
You can configure default e-mail settings.
You cannot change e-mail profile and account
settings while e-mails are being sent or retrieved.
•
Send settings: set up the options for sending
e-mails:
Send copy to self: send a copy of your e-mails to
your e-mail account.
Delivery confirm: set the network to inform you
when your e-mails have been delivered.
•
Messages (Menu 5)
Email (Menu 5.5.3)
Menu functions
Depending on your service provider, it may not
be possible to support the maximum limit
295KB. In this case, try again after changing
the setting to 100KB.
Read confirm: send a read-reply request along
with e-mails.
Priority: select the priority level of e-mails.
Include signature: attach your name, phone
number, a simple memo, or a tag line to your
e-mails.
Edit name: edit the name in your signature.
Edit telephone number: edit the phone number
in your signature.
Edit note: edit the tag line in your signature.
Receive settings: set up the options for receiving
e-mails:
Check interval: determine how often the phone
checks the server for incoming e-mails. If you
select Not used, use the Check new mail option
to receive new e-mails manually.
Read reply: determine whether or not the phone
sends a read-reply when an incoming e-mail has
been read.
65
Menu functions
•
66
Retrieve option: set whether the phone
downloads e-mail headers only or the complete
e-mail.
Delete option: determine whether e-mails are
deleted immediately or the next time you connect
to the server.
Reject if over: determine the maximum size for
incoming e-mails. Your phone will reject e-mails
that exceed the specified size.
Leave a copy of messages on the server: leave
copies of e-mails on the e-mail server after
retrieving.
Email account: configure an e-mail account and
select an account to be used.
Current account: select an account.
Account settings: set up an e-mail account using
different e-mail servers. Set the options for each
account:
- In use: select this option to use the account and
to display the account in Email box.
- Account name: enter a name for the currently
selected account.
- User name: enter a user name.
- Email address: enter your e-mail address.
- Reply address: enter the e-mail address to
which you want recipients to send reply
messages.
- User ID: enter an e-mail ID.
- Password: enter your e-mail password.
- SMTP server: enter the IP address or host name
of the outgoing e-mail server.
- SMTP port: enter the SMTP port number.
- Protocol type: select the protocol for the
incoming e-mail server. The remaining options
depend on the protocol type setting.
When the protocol type is POP3:
- POP3 server: enter the IP address or host name
of the server that receives your e-mail.
- POP3 port: enter the POP3 port number.
•
- Profile name: enter a profile name.
- APN: enter the access point name.
- Login ID: enter the login ID.
- Password: enter the login password.
- DNS1: enter the primary DNS address.
- DNS2: enter the secondary DNS address.
Block list: specify e-mail addresses from which
messages will not be accepted. You can also
specify message subjects that you will not accept.
Menu functions
Messages (Menu 5)
•
- APOP login: connect to the server by using the
APOP login scheme.
- Secure connection: use a secure connection for
the e-mail service.
When the protocol type is IMAP4:
- IMAP4 server: enter the IP address or host
name of the server that receives your e-mail.
- IMAP4 port: enter the IMAP4 port number.
- Include attachments: select this option to
receive attachments with e-mails.
- Max. Emails retrieved: set the number of
headers you will retrieve from the server.
- Secure connection: use a secured connection
for e-mail service.
Email profile: set up a connection profile and
select a profile to be used for e-mail services.
Current profile: select a profile.
Profile settings: set up an e-mail profile. For
each profile, the following options are required to
connect to the GPRS network:
Push message (Menu 5.5.4)
You can change the settings for receiving push
messages from the wireless web server.
• Receive: set how your phone receives push
messages.
• Service centre: enter the address of the server
from which you want to receive push messages,
when the Receive option is set to the SMS-C
specific.
67
Menu functions
68
Broadcast messages (Menu 5.6)
Memory status (Menu 5.7)
You can change the settings for receiving CB
messages.
• Read: open received messages.
The Archive box saves network messages
indefinitely. Press <Options> and select Save to
save messages to the Archive box when a text
notification appears.
The Temporary box saves network messages until
the phone is switched off.
• Receive: select to receive CB messages, or not.
• Channel: indicate the channels from which you
wish to receive CB messages. Please contact your
service provider for further details.
• Language: select the preferred languages in
which CB messages display.
Use this menu to view the number of messages or the
amount of memory currently in use for each message
type in each folder.
You can also access a message box by selecting it
from this menu.
File manager
(Menu 6)
The File manager menu allows you to access images,
videos, music files, and sound files stored in the
phone’s memory or on a memory card.
To access this menu, press <Menu> in Idle mode and
select File manager.
Tips for Digital Rights Management
As a result of the Digital Rights Management (DRM)
system, some of the media items you download from
the Internet or receive by MMS may require a licence
key to access them.
You can acquire the key from the website which owns
the rights to the content; use the Activate key
option.
Images (Menu 6.1)
This menu displays photos you have taken and images
you have downloaded, received in messages, or
imported from your computer.
Viewing an image
1. Select an image folder.
2. Select an image.
Using image options
File manager (Menu 6)
Your service provider supports only count-based or
unlimited-access DRM files.
You can view your photos as a slide show, a sequential
presentation of each photo in the current folder.
1. Select Photos.
2. Press <Options> and select Slide show.
3. Select a time interval between photos. The slide
show begins.
4. Press <Back> to stop the slide show.
Menu functions
Note the following icons on the list:
•
: Forwardable item with a valid key.
•
: Forwardable item without a valid key.
•
: Unforwardable item with a valid key.
•
: Unforwardable item without a valid key.
Viewing a slide show
While viewing an image, press <Options> to access
the following options:
• List: return to the image list.
• Send via: send the file via MMS, e-mail, or
Bluetooth.
• Set as: set the image as wallpaper for the displays
or as a caller ID image for a Phonebook entry.
• Edit: edit the image using the Image editor, if it is
a photo taken by the camera on the phone.
p. 45
69
Menu functions
•
•
•
•
•
•
•
•
•
•
•
70
Activate key: get a new licence key when the key
for the selected DRM file expires.
Reactivate key: get another licence key even
when the key for the selected DRM file has not
expired.
Move to: move the file to another folder or to a
memory card.
Copy to card: copy the file to a memory card.
Delete: delete the file
Rename: change the file name.
Slide show: set all photos to display as a slide
show.
Share for Bluetooth: share the file with other
Bluetooth devices.
Print via: print the image by connecting the
phone to a printer via Bluetooth or USB. To print
via USB, first switch the phone to a Pictbridge
mode. p. 87
Protection: protect the file from being deleted.
Properties: access the file properties.
Videos (Menu 6.2)
This menu displays video clips you have recorded,
downloaded, received in messages, or imported from
your computer.
Playing a video clip
1. Select a video folder.
2. Select a video clip.
During playback, you can use the following keys:
Key
Function
Pauses or resumes playback.
Left
Returns to the previous file. Moves
backward in a file when held down.
Right
Skips to the next file. Skips forward in a
file when held down.
Up
Opens the file list.
Volume
Adjusts the volume.
Down
Stops playback.
Using video options
•
•
•
•
•
Rename: change the file name.
Sort by: change the sort order of files.
Share for Bluetooth: share the selected file or all
files with other Bluetooth devices.
Protection: protect the file from being deleted.
Properties: access the file properties.
Menu functions
Music (Menu 6.3)
This menu displays MP3 files you have downloaded or
imported from your computer.
File manager (Menu 6)
While viewing the video list, press <Options> to
access the following options:
• Play: play the selected file.
• Display mode: change the view mode in the file
list.
• Send via: send the file via MMS, e-mail, or
Bluetooth.
• Set as caller ID: set the video clip as a caller ID
image for a Phonebook entry.
• Activate key: get a new licence key when the key
for the selected DRM file expires.
• Reactivate key: get another licence key even
when the key for the selected DRM file has not
expired.
• Move to: move the file to another folder or a
memory card.
• Copy to card: copy the file to a memory card, if
one has been inserted.
• Delete: delete the selected file or all files.
Select a file from the Music folder. The MP3 player
opens.p. 41
Using music options
While viewing the music file list, press <Options> to
access the following options:
• Play via: play the selected file.
• Send via: send the file via e-mail or Bluetooth.
• Add to play list: add the selected file to the play
list you want.
71
Menu functions
•
•
•
•
•
•
•
•
•
•
•
•
Set as: set the music file as your ringtone, a
ringtone for a Phonebook entry, or alarm tone.
Activate key: get a new licence key when the key
for the selected DRM file expires.
Reactivate key: get another licence key even
when the key for the selected DRM file has not
expired.
Move to card: move the file to a memory card.
Copy to card: copy the file to a memory card.
Delete: delete the selected file or all files.
Settings: change the default settings for playing
music files. p. 43
Rename: change the file name.
Sort by: change the sort order of files.
Share for Bluetooth: share the selected file or all
files with other Bluetooth devices.
Protection: protect the file from being deleted.
Properties: access the file properties.
Sounds (Menu 6.4)
This menu displays voice memos you have recorded
and sound clips you have downloaded, received in
messages, or imported from your computer.
Playing a sound clip
1. Select a sound folder.
2. Select a sound clip.
For a voice memo, see Voice recorder.p. 44
During playback, use the following keys:
Key
Function
Left
Returns to the previous file.
Right
Skips to the next file.
Up/Down OR
Volume
Adjusts the volume.
Using sound options
While viewing the sound list, press <Options> to
access the following options:
72
•
•
•
•
•
•
•
•
•
•
•
Use this menu to view various document files and files
stored in the phone’s memory or a memory card
without corruption. Available file formats are DOC,
XLS, PPT, PDF, and TXT.
Viewing a document
Select a document. Picsel File Viewer runs to open the
document.
• Depending on the file size or memory capacity of
the Picsel File Viewer, some files may not open
properly.
• If a document file contains languages unsupported
by the Picsel File Viewer, the content of the
document will not display correctly.
File manager (Menu 6)
•
Other files (Menu 6.5)
Menu functions
•
Play: play the file.
Send via: send the file via MMS, e-mail, or
Bluetooth.
Set as: set the sound clip or voice memo as your
ringtone, a ringtone for a Phonebook entry, or
alarm tone.
Activate key: get a new licence key when the key
for the selected DRM file expires.
Reactivate key: get another licence key even
when the key for the selected DRM file has not
expired.
Move to: move the file to another folder or a
memory card.
Copy to card: copy the file to a memory card.
Delete: delete the selected file or all files.
Rename: change the file name.
Sort by: change the sort order of files.
Share for Bluetooth: share the selected file or all
files with other Bluetooth devices.
Protection: protect the file from being deleted.
Properties: access the file properties.
Use the following keys to view the document:
Key
Function
Up/Down/
Left/Right
Pans around the page.
Volume
Zooms in or out.
73
Menu functions
Key
Function
Fits the document to the page size.
1
Changes the panning mode.
2
Returns to the first page.
4
Returns to the previous page.
5
Rotates the document.
6
Moves to the next page.
7
Changes the view mode to the screen
width.
8
Moves to the last page.
9
Changes the view mode to the screen
height.
Changes the display to Full screen
view or Normal screen view.
Hides or displays the shortcut tool
bar. This key is only available in Full
screen mode.
74
Using document options
While viewing a document, press <Options> to
access the following options:
• Full screen view/Normal screen view: change
the view mode.
• Zoom: zoom in or out.
• Fit to: fit the document to the page size, screen
width, or screen height.
• Go to: move to another page of the document.
• Rotate: rotate the document.
• Screen panning/Normal panning: change the
panning mode to by screen or by preset pixel.
• Hide control bar/Show control bar: hide or
display the shortcut tool bar in Full screen view.
• Send via: send the file via MMS, e-mail, or
Bluetooth.
• Move to card: move the file to a memory card.
• Copy to card: copy the file to a memory card.
• Delete: delete the file.
• Rename: change the file name.
•
•
Memory card (Menu 6.6)
Your phone is preset to use FAT16-formatted
memory cards. If you insert a FAT32-formatted
memory card, the phone will ask you to reformat the
memory card. If you do not, you will not be able to
access the card from the phone.
Memory status (Menu 6.7)
Use this menu to view memory information for media
items in the phone’s memory or on a memory card.
(Menu 7)
The Calendar menu enables you to keep track of your
schedule.
To access this menu, press <Menu> in Idle mode and
select Calendar.
Month view (Menu 7.1)
Use this menu to keep track of your monthly schedule.
Consulting the calendar
Calendar (Menu 7)
Use this menu to access the files stored in a memory
card. This menu is shown only when a memory card is
inserted into the phone.
Calendar
Menu functions
•
•
Share for Bluetooth: share the selected file with
other Bluetooth devices.
Print via: print the image file by connecting the
phone to a printer via Bluetooth or USB.
Protection: protect the file from being deleted.
Properties: access the file properties.
When you enter the Calendar menu, the calendar in
Month view appears with today’s date indicated by a
green box.
Selecting a day
• Press [Left] or [Right] to move by day.
• Press [Up] or [Down] to move by week.
• Press [Volume] to move by month.
Using calendar options
Press <Options> to access the following options:
75
Menu functions
•
•
•
•
•
•
•
View mode: change the view mode of the
calendar.
Create: add a new item. p. 76
Go to: go to today’s date or enter the specific date
you want.
Sort by: sort items by type of item.
Delete: delete the items stored on the calendar
for the specific period.
Missed alarm events: access items whose
alarms you have missed.
Memory status: access memory information for
the items stored on the calendar.
Creating an item
You can store schedule items, miscellaneous items,
anniversaries, and To-do items on the calendar. More
than one item per day can be stored.
Entering a new schedule item or miscellaneous
item
1. Select a date on the calendar.
76
2. Press <Options> and select Create → Schedule
or Miscellaneous.
3. Enter information or change the settings:
• Subject: enter a title of the item.
• Details: enter item details.
• Start date and Start time: enter the starting
date and time for the item.
• AM/PM: select AM or PM in 12-hour time
format.
• End date and End time: enter the ending date
and time for the item.
• AM/PM: select AM or PM in 12-hour time
format.
• Location: (for Schedule) enter information
about the item location.
• Alarm: set an alarm for the item.
• before: set how long before the item the alarm
is to alert you.
• Alarm tone: select an alarm tone.
• Repeat: (for Schedule) select to set the item
to recur.
•
until: (for Schedule) set the ending date, if
the item will recur.
4. Press <Save> to save the item.
Calendar (Menu 7)
Viewing an item
Once you have scheduled things, the following icons
and the number of items for a specific day appear at
the bottom of the calendar.
•
Schedule item
•
Anniversary
•
To-do item
•
Miscellaneous item
Menu functions
Entering a new anniversary
1. Select a date on the calendar.
2. Press <Options> and select Create →
Anniversary.
3. Enter information or change the settings:
• Occasion: enter information about the
anniversary.
• Date: enter the date for the anniversary.
• Alarm: set an alarm for the anniversary.
• before: set how long before the anniversary
the alarm is to alert you.
• Alarm time: enter an alarm time.
• AM/PM: select AM or PM in 12-hour time
format.
• Alarm tone: select an alarm tone.
• Repeat every year: set the phone to remind
you of the anniversary every year.
4. Press <Save> to save the anniversary.
Entering a new To-do item
1. Select a date on the calendar.
2. Press <Options> and select Create → To do.
3. Enter information or change the settings:
• To do: enter information about the To-do item.
• Start date: enter the starting date.
• Due date: enter the ending date.
• Priority: select a priority level.
4. Press <Save> to save the To-do item.
1. Select a date on the calendar to display the items
for the day.
2. Select an item to view its details.
77
Menu functions
3. Press [Left] or [Right] to access the other items
scheduled for the selected day.
Using options
While viewing an item, press <Options> to access
the following options:
• Edit: edit the item.
• Create: add a new item.
• Send via: send the item via SMS, MMS, e-mail, or
Bluetooth.
• View mode: change the view mode of the
calendar.
• Done/Undone: (for To do) change the status of
the To-do item.
• Delete: delete the item.
• Print via Bluetooth: print the item details via a
Bluetooth-compatible printer.
78
Week view (Menu 7.2)
You can view items for the selected week. A cell on the
timetable indicates the presence of a schedule item
and miscellaneous item. Select a cell for the date you
want.
Day view (Menu 7.3)
You can view items for the selected date. Select an
item to view its details.
The following icons may display to indicate the item
status:
•
Alarm set
•
Recurring item
•
Completed To do item
•
To-do item priority (Red: high, Blue: normal,
and Grey: low)
Camera
(Menu 8)
You can use the camera module embedded in your
phone to take photos and record videos.
Take a photo (Menu 8.1)
Use this menu to take photos in various modes. The
camera produces JPEG photos.
When you take a photo in direct sunlight or in bright
conditions, shadows may appear on the photo.
5. To
Camera (Menu 8)
• Do not take photos of people without their
permission.
• Do not take photos in a place where cameras are
not allowed.
• Do not take photos in a place where you may
interfere with another person’s privacy.
1. Access the Take a photo menu to turn on the
camera and switch the display to Capture mode.
You can also press and hold [CAMERA].
The preview screen appears in Landscape view.
2. Hold the phone horizontally.
3. Make any desired adjustments.
• Press [MENU] or <
> to access camera
options.p. 80
• Use the keypad to change the camera settings
or switch to other modes.p. 81
] to take a photo. The
4. Press [CAMERA] or [
photo is saved in the Photos folder.
Menu functions
To access this menu, press <Menu> in Idle mode and
select Camera, or press [CAMERA].
Taking a photo
Press
access photo options
[MENU] or <Options>.
p. 82
delete the photo
[C] and then <Yes>.
return to Capture mode
[CAMERA], [
<Back>.
], or
79
Menu functions
Using the auto focus function
In Capture mode, press and hold [CAMERA] to
automatically adjust the focus. The colour of the focus
frame changes briefly to green.
Using camera options in Capture mode
In Capture mode, press [MENU] or <
> to access
the following options:
• Record video: switch to Record mode.
• Shooting mode: take a photo in the following
modes:
Single shot: take a photo in normal mode. You
can select whether or not the camera automatically
saves a photo.
Multi shot: take a series of action stills. You can
select the number of still images the camera will
take and shooting speed.
Mosaic shot: take several stills and save them in
one frame. You can select the layout.
• Effects: change the colour tone or apply a special
effect.
80
•
•
•
•
•
Frames: apply a decorative frame.
Flash: determine the use of the flash.
Timer: set a time delay before the camera takes a
photo.
Go to photos: access the Photos folder.
Settings: change the default settings for taking a
photo.
Function: change the following image settings:
- Size: select an image size.
- Quality: select an image quality.
- View finder: select a preview screen mode.
- Scene programs: select a scene mode, Normal
shot mode or Night shot mode.
- Metering exposure: select a method to
determine the exposure of an image, based on a
specific area of the image.
- White balance: adjust the colour balance of the
image. You can make your photo appear warmer
or cooler.
Using the keypad in Capture mode
You can use the keypad to customise your camera
settings in Capture mode.
Key
Menu functions
Function
Up/Down or Zooms in or out.
Volume
Left/Right
Adjusts the brightness.
1
Switches to Record mode.p. 82
2
Changes the image size.
3
Changes the image quality.
4
Changes the shooting mode.
5
Changes the colour tone or applies a
special effect.
6
Changes the ISO setting.
7
Selects a decorative frame.
8
Sets the timer.
Camera (Menu 8)
•
- ISO: change the ISO setting, which controls the
sensitivity of your camera. For low light
situations, select a higher ISO number. The
higher the ISO number, the faster the camera
shutter functions and the more sensitive the
camera is to light. Higher ISO settings may bring
some distortion to an image.
Setup: change the following camera settings:
- Shutter sound: select the sound that you hear
when you press the shutter release.
- Zoom sound: turn the sound effect for zooming
on or off.
- Brightness sound: turn the sound effect for
brightness adjustment of or off.
- Focus sound: turn the sound effect for focus
adjustment on or off.
- Default name: change the default prefix of file
names.
Camera short cuts: view the functions of the
keys you can use in Capture mode.
81
Menu functions
Key
Function
•
9
Goes to the Photos folder.
•
•
•
Changes a preview screen.
0
Determines the use of the flash.
Changes the white balance.
•
Using photo options
After saving a photo, press <Options> or [MENU] to
access the following options:
• Take another: switch to Capture mode.
• Send via: send the file via MMS, e-mail, or
Bluetooth.
• Set as: set the photo as wallpaper for the displays
or caller ID image for a Phonebook entry.
• Edit: edit the photo using the Image editor.
p. 45
• Delete: delete the file.
82
•
•
Multi shot delete all: delete the multi-shot
photos you select or all photos.
Rename: change the file name.
Go to photos: access the Photos folder.
Share for Bluetooth: share the file with other
Bluetooth devices.
Print via: print the image by connecting the
phone to a printer via Bluetooth or USB. To print
via USB, first switch the phone to a Pictbridge
mode. p. 87
Protection: protect the file from being deleted.
Properties: access the file properties.
Record video (Menu 8.2)
You can record a video of what is displayed on the
camera screen and save it.
Recording a video
1. Access the Record video menu to turn on the
camera and switch the display to Record mode.
The preview screen appears in Landscape view.
Press
play back the video clip
[
].
access video options
[MENU] or <
p. 85
return to Record mode
<
delete the video clip
[C] and then <Yes>.
>.
>.
In Record mode, press and hold [CAMERA] to
automatically adjust the focus. The colour of the focus
frame changes briefly to green.
Using camera options in Record mode
In Record mode, press [MENU] or <
> to access the
following options:
• Take a photo: switch to Capture mode.
• Effects: change the colour tone or apply a special
effect to a video.
• Flash: determine the use of the flash.
• Timer: set a time delay before the camera starts
recording a video.
• Go to videos: access the Videos folder.
• Settings: change the following settings for
recording a video:
Recording mode: select a video recording mode.
Select Normal to record a video within the limit of
the currently available memory.
Camera (Menu 8)
6. To
Using the auto focus function
Menu functions
2. Hold the phone horizontally.
3. Make any desired adjustments.
• Press [MENU] or <
> to access camera
options.p. 83
• Use the keypad to change the camera settings
or switch to other modes.p. 84
4. Press [CAMERA] or [
] to start recording.
To pause or resume, press [CAMERA] or [
].
5. Press < > to stop recording. The video clip is
saved in the Videos folder.
83
Menu functions
Select Limit of MMS to record a video suitable for
an MMS message.
Size: select an image size.
Quality: select an image quality.
View finder: select a preview mode, either Full
screen mode or normal mode with actual ratio.
Audio rec.: turn on or off the audio.
White balance: adjust the colour balance of the
image. You can make your photo appear warmer
or cooler.
Scene programs: select a scene mode, Normal
shot mode or Night shot mode.
Zoom sound: turn the sound effect for zooming
on or off.
Brightness sound: turn the sound effect for
brightness adjustment of or off.
Focus sound: turn the sound effect for focus
adjustment on or off.
Default name: change the default prefix of file
names.
84
•
Camcorder short cuts: view the functions of the
keys you can use in Record mode.
Using the keypad in Record mode
You can use the keypad to customise your camera
settings in Record mode:
Key
Function
Up/Down or Zooms in or out.
Volume
Left/Right
Adjusts the brightness.
1
Switches to Capture mode.p. 79
2
Changes the image size.
3
Changes the image quality.
4
Changes the video recording mode.
5
Changes the colour tone or applies a
special effect.
6
Turns the audio on or off.
Function
7
Changes a scene mode.
8
Sets the timer.
9
Goes to the Videos folder.
Changes a preview screen.
0
•
•
•
•
•
Rename: change the file name.
Go to videos: access the Videos folder.
Share for Bluetooth: share the file with other
Bluetooth devices.
Protection: protect the file from being deleted.
Properties: access the file properties.
Go to photos (Menu 8.3)
Changes the white balance.
Use this menu to access a list of photos you have
taken.p. 69
Using video options
After saving a video clip, press [MENU] or <
> to
access the following options:
• Record another: switch to Record mode.
• Send via: send the file via MMS, e-mail, or
Bluetooth.
• Set as caller ID: set the video clip as a caller ID
image for a Phonebook entry.
• Delete: delete the file.
Camera (Menu 8)
Determines the use of the flash.
Menu functions
Key
Go to videos (Menu 8.4)
Use this menu to access a list of videos you have
recorded. p. 70
85
Menu functions
Settings
(Menu 9)
The Settings menu provides you with various setting
options to customise the phone to your preferences
and needs. You can also reset the settings to their
default status.
To access this menu, press <Menu> in Idle mode and
select Settings.
Time & Date (Menu 9.1)
Use this menu to change the time and date displayed
on your phone. Before setting the time and date,
specify your time zone in Home zone.
• Time: enter the current time.
• Home zone: set your local time zone and find out
what time it is in another part of the world.
To apply daylight savings time to time zones,
select Set daylight saving time.
•
•
86
•
AM/PM: select AM or PM in 12-hour time format.
Time format: select the 12-hour or 24-hour time
format.
Set date: enter the current date.
•
•
•
Date format: select a date format.
Week start day: set which day of the week the
calendar starts with.
Auto update: set the current time automatically if
Home zone is changed.
Phone settings (Menu 9.2)
Many different features of your phone’s system can be
customised to suit your preferences.
Language (Menu 9.2.1)
Use this menu to select one of several languages for
the display text.
Greeting message (Menu 9.2.2)
Use this menu to enter the greeting that is displayed
briefly when your phone is switched on.
Short cut (Menu 9.2.3)
You can use the Navigation keys as shortcuts to access
specific menus directly from Idle mode. Use this menu
to assign a shortcut to a key.
Assigning a shortcut menu
1. Select a key to be used as a shortcut key.
2. Select a menu to be assigned to the key.
•
Using shortcut options
You can turn the automatic redialling or answering
features on or off, or activate the voice clarity feature.
• Auto redial: set the phone to make up to ten
attempts to redial a phone number after an
unsuccessful call.
• Anykey answer: answer an incoming call by
pressing any key, except [ ] and <Reject>.
• Voice clarity: remove extraneous noise and
increase call quality so that the person with whom
you are speaking can hear you clearly even if you
are in a noisy place.
• Active folder: answer an incoming call by opening
the phone.
Use this menu to set whether the phone mutes the call
ringer or rejects a call if you press and hold [Volume]
when a call comes in.
USB settings (Menu 9.2.5)
Use this menu to select a USB mode.
• Modem: use the phone as a modem.
• Mass storage: use the phone as an external
memory disk, if a memory card is inserted into the
phone.
Settings (Menu 9)
Volume key (Menu 9.2.4)
Extra settings (Menu 9.2.6)
Menu functions
Press <Options> to access the following options:
• Change: assign or change a shortcut menu.
• Remove: deactivate the shortcut assignment to
the selected key.
• Remove all: deactivate all shortcut assignments.
Pictbridge: connect the phone to a Pictbridgecompatible printer via USB.
87
Menu functions
Offline mode (Menu 9.2.7)
Text display (Menu 9.3.2)
Use this menu to switch the phone to Offline mode, in
which the phone functions requiring network
connections are deactivated. You can use non-wireless
functions, such as, calendar, games, contacts, and
voice recorder on an airplane during flight.
You can change the display settings for the text
displayed on the idle screen.
• Text position: select a text position. If you don’t
want to display text in Idle mode, select Off.
• Text style: select a font style.
• Text colour: select a font colour.
Display settings (Menu 9.3)
88
Use this menu to change settings for the display and
backlight.
Skin (Menu 9.3.3)
Wallpaper (Menu 9.3.1)
LCD brightness (Menu 9.3.4)
You can set up the idle screen on both displays.
• Main display: select an image to be displayed on
the main display.
• Cover display: select an image type to be
displayed on the external display.
Clock: select a clock type.
Cover title: enter the text you want.
Wallpaper images: select an image.
You can adjust the brightness of the display for
varying lighting conditions.
You can select a skin colour pattern for Menu mode.
Backlight (Menu 9.3.5)
You can select the length of time the backlight and the
display stay on.
• Main LCD on: select the length of time the
backlight stays on at times of inactivity.
•
•
Dialling display (Menu 9.3.6)
TV-out (Menu 9.3.9)
Use this menu to select the default video system for a
TV.
Sound settings (Menu 9.4)
Use this menu to customise various sound settings.
Incoming call (Menu 9.4.1)
Show caller information (Menu 9.3.8)
Keypad tone (Menu 9.4.2)
Use this menu to set the phone to display missed call
notifications with the most recently missed caller’s
information. To set the external display to show caller
information, select With cover display.
Use this menu to select the tone that the phone
sounds when you press a key.
Calendar (Menu 9.3.7)
Settings (Menu 9)
Use this menu to display the current calendar on the
idle screen.
Use this menu to change the sound settings for
incoming calls.
• Ring tone: select a ringtone to be used for the call
ringer.
• Volume: select a ringtone volume.
• Alert type: specify how you are to be informed of
incoming calls.
Use this menu to select a font colour and size for the
numbers entered and the background colour of the
display while dialling.
Menu functions
•
Main LCD dim: select the length of time the
display stays in Dim mode after the backlight turns
off. After a specified time, the display turns off.
Show cover indicators: set whether or not the
icons are shown on the external display.
During charging: set whether or not the display
stays in Dim mode while charging.
You can adjust the keypad tone volume using
[Volume] in Idle mode.
89
Menu functions
Message tone (Menu 9.4.3)
Extra tones (Menu 9.4.7)
Use this menu to change the sound settings for
incoming messages or e-mails.
• Tone: select one of several message tones.
• Alert type: specify how you are to be informed
when a message comes in.
• Repetition: specify how often the phone informs
you of a new message.
Use this menu to customise additional tones for the
phone.
• Minute minder: set the phone to beep every
minute during an outgoing call to keep you
informed of the length of your call.
• Connection tone: set the phone to beep when an
outgoing call is connected the system.
• Alerts on call: set the phone to beep when you
receive a new message or when the time for an
alarm comes during a call.
• Indicative tones: set the phone to beep when a
pop-up window displays.
Power on/off (Menu 9.4.4)
Use this menu to select the melody that the phone
sounds when it is switched on or off.
Folder tone (Menu 9.4.5)
Use this menu to select the tone that the phone
sounds when you open or close it.
Quiet mode (Menu 9.4.6)
Use this menu to set how the phone acts to alert you
to a specific event while in Quiet mode.
Network services (Menu 9.5)
Use this menu to access network services. Please
contact your service provider to check their availability
and subscribe to them, if you wish.
Call diverting (Menu 9.5.1)
This network service reroutes incoming calls to a
phone number that you specify.
90
Call barring (Menu 9.5.2)
Settings (Menu 9)
This network service allows you to restrict your calls.
1. Select a call barring option:
• All outgoing: prohibit outgoing calls.
• International: prohibit international calls.
• International except home: only allow calls
to numbers within the current country when
you are abroad, and to your home country.
• All incoming: prohibit incoming calls.
• Incoming while abroad: prohibit incoming
calls when you use your phone outside of your
home service area.
• Cancel all: cancel all call barring settings,
allowing to be sent and received normally.
• Change barring password: change the call
barring password obtained from your service
provider.
2. Select the type of calls to be barred.
3. Select Activate. To deactivate call barring, select
Deactivate.
4. Enter the call barring password supplied by your
service provider and press <OK>.
Menu functions
1. Select a call diverting option:
• Divert always: divert all calls.
• Busy: divert calls when you are on another
call.
• No reply: divert calls when you do not answer
the phone.
• Unreachable: divert calls when you are not in
an area covered by your service provider or
when your phone is switched off.
• Cancel all: cancel all call diverting options.
2. Select the type of calls to be diverted.
3. Select Activate. To deactivate call diverting, select
Deactivate.
4. Move to the Divert to line.
5. Enter the number to which calls are to be diverted.
6. If you selected No reply, move to the Sec line and
select the length of time the network delays before
diverting a call.
7. Press <OK>.
91
Menu functions
Call waiting (Menu 9.5.3)
This network service informs you when someone is
trying to reach you while you are on another call.
1. Select the type of calls to which the call waiting
option will apply.
2. Select Activate. To deactivate call waiting, select
Deactivate.
Some networks do not allow the user to change this
setting.
Voice mail server (Menu 9.5.6)
Use this menu to store the number of the voicemail
server and access your voicemails.
You must enter the voicemail server number before
you can access your voicemails. Your service
provider can give this number.
Network selection (Menu 9.5.4)
This network service allows you to manually select the
network to be used while roaming outside of your
home area, or to let the network be chosen
automatically. You can select a network other than
your home network only if there is a valid roaming
agreement between the two.
Caller ID (Menu 9.5.5)
This network service allows you to prevent your phone
number from being displayed on the phone of the
person being called. If you select Default, the phone
will use the default setting provided by the network.
92
•
•
Connect to voice mail: connect to the voicemail
server to listen to your messages.
Voice server number: enter the voicemail server
number.
Band selection (Menu 9.5.7)
For the phone to make and receive phone calls, it
must register with an available network. Your phone
can handle any of the following types of networks:
GSM 1900, Combined GSM 900/1800, and Tri band
(GSM 900/1800/1900).
Bluetooth (Menu 9.6)
Using Bluetooth wireless, you can connect the phone
wirelessly to other Bluetooth devices and exchange
data with them, talk hands-free, or control the phone
remotely.
• If there are obstacles between the devices, the
maximum operating distance may be reduced.
• It is recommended that you don't use the
Bluetooth feature while using multimedia features
such as voice recorder, camera, and MP3 player,
or vice versa for a good performance.
• Some devices may not be compatible with your
phone.
The Bluetooth menu provides the following options:
• Activation: activate or deactivate the Bluetooth
feature.
• My devices: search for connectable Bluetooth
devices.
• My phone’s visibility: allow other Bluetooth
devices to locate your phone, or not.
• My phone’s name: assign a Bluetooth device
name to your phone, which is then displayed on
other devices.
• Secure mode: determine if the phone asks for
your confirmation when other devices access your
data.
• Bluetooth services: display available Bluetooth
services.
Settings (Menu 9)
Bluetooth technology allows free wireless connections
between all Bluetooth-compliant devices within a
range of 10 metres. Since the devices communicate
using radio waves, they do not need to be in line of
sight to each other.
Setting up the Bluetooth feature
Menu functions
The country where you purchased your phone
determines the default band that it uses. When you
travel abroad, you may need to change to an
appropriate band.
Searching for and pairing with a Bluetooth
device
1. From the Bluetooth setting options, select My
devices.
93
Menu functions
2. Select Search new device.
After searching, a list of devices to which you can
connect displays. The following icons indicate the
type of device:
•
Mobile phone
•
•
Computer
•
•
Printer
•
PDA
Headset or handsfree car kit
Unknown device
The colour of the icon indicates the status of the
device:
• Grey for unpaired devices
• Blue for paired devices
• Red for devices that are currently connected to
your phone
3. Select a device.
4. Enter a Bluetooth PIN and press <OK>. This code
is used just once and you don’t need to memorise it.
When the owner of the other device enters the
same code, pairing is complete.
94
Some devices, especially headsets or hands-free car
kits, may have a fixed Bluetooth PIN, such as 0000.
If the other device has one, you must enter the
code.
Using device options
From the device list, press <Options> to access the
following options:
• Connect: connect to a headset or hands-free car
kit.
• Disconnect: end the connection with the
connected device.
• Browse files: search for data from the device and
import data directly to your phone.
• Service list: access the Bluetooth service list of
the device.
• Rename: rename the paired device.
• Authorize device/Unauthorize device:
determine whether or not the phone asks you to
permit connection when other devices try to
connect to your phone.
•
Delete: remove the selected device or all devices
from the list.
Sending data via Bluetooth
To receive data via Bluetooth, your phone’s Bluetooth
feature must be active and its visibility must be
enabled.
Security (Menu 9.7)
Use this menu to protect the phone against
unauthorised use by managing the several access
codes of your phone and SIM card.
If you enter an incorrect PIN/PIN2 three times in
succession, the SIM card is blocked. To unblock it,
you need to enter your PUK/PUK2 (Personal
Unblocking Key). The codes are supplied by your
service provider.
Settings (Menu 9)
Receiving data via Bluetooth
Menu functions
1. Activate the Bluetooth feature.
2. Select the application in which the item you want
to send is stored.
3. Select the item you want.
4. Press <Options> and select Send via →
Bluetooth.
The phone searches for devices within range and
displays a list of available devices.
5. Select a device.
6. If necessary, enter the Bluetooth PIN needed for
pairing and press <OK>.
If an unauthorised Bluetooth device sends data to your
phone, press <Yes> to allow the device to access
your phone.
PIN check (Menu 9.7.1)
The 4-to 8-digit PIN (Personal Identification Number)
protects your SIM card against unauthorised use.
When this feature is enabled, the phone requires your
PIN each time it is switched on.
Change PIN (Menu 9.7.2)
Use this menu to change your PIN. The PIN check
feature must be enabled to change the PIN.
95
Menu functions
Phone lock (Menu 9.7.3)
SIM lock (Menu 9.7.6)
Use this menu to protect the phone from unauthorised
use. When this feature is enabled, you must enter a 4to 8-digit phone password each time the phone is
switched on.
This menu allows your phone to work only with the
current SIM card by assigning a SIM lock code. You
must enter the SIM lock code to use a different SIM
card.
The password is preset to 00000000. To change the
password, use the Change password menu.
FDN mode (Menu 9.7.7)
Change password (Menu 9.7.4)
Use this menu to change your phone password.
Privacy (Menu 9.7.5)
Use this menu to lock access to call records,
Phonebook entries, messages, or media files in the
phone’s memory or on a memory card. When a
privacy option is enabled, you must enter the phone
password to access the locked items.
96
If supported by your SIM card, Fixed Dialling Number
(FDN) mode restricts your outgoing calls to a limited
set of phone numbers. When this feature is enabled,
you can make calls only to phone numbers stored on
the SIM card.
Change PIN2 (Menu 9.7.8)
If supported by your SIM card, use this menu to
change your current PIN2.
Memory status (Menu 9.8)
Use this menu to check the amount of memory for
messages, media and document files, calendar items,
Phonebook entries, and Java applications. You can also
check the shared memory for MMS, Email, and File
manager.
Reset settings (Menu 9.9)
Use this menu to reset the phone’s settings you have
changed.
1. Press [
] to select the setting categories to be
reset.
2. Press <Reset>.
3. Press <Yes> to confirm the reset.
4. Enter the phone password and press <OK>.
The password is preset to 00000000. You can
change this password.Change password
Solve problems
Help and personal needs
To save the time and expense of an unnecessary service
call, perform the simple checks in this section before
contacting a service professional.
When you switch on your phone, the following
messages may appear:
“Insert SIM”
• Be sure that the SIM card is correctly installed.
“Phone lock”
• The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
“Enter PIN”
• You are using your phone for the first time. You
must enter the PIN supplied with the SIM card.
• The PIN check feature is enabled. Every time the
phone is switched on, the PIN has to be entered.
To disable this feature, use the PIN check menu.
97
Solve problems
“Enter PUK”
• The PIN has been entered incorrectly three times
in succession, and the SIM card is now blocked.
Enter the PUK supplied by your service provider.
•
“No Service,” “Network Failure,” or “Not Done”
displays
• The network connection has been lost. You may be
in a weak signal area. Move and try again.
• You are trying to access an option for which you
have no subscription with your service provider.
Contact the service provider for further details.
Your correspondent cannot hear you speaking
• Be sure that you have switched off the
microphone.
• Be sure that you are holding the phone close
enough to your mouth. The microphone is located
at the bottom of the phone.
You have entered a number but it was not dialled
• Be sure that you have pressed [ ].
• Be sure you have accessed the right cellular
network.
• Be sure that you have not set an outgoing call
barring option.
Your correspondent cannot reach you
• Be sure your phone is switched on. ([ ] pressed
for more than one second.)
98
•
Be sure you are accessing the correct cellular
network.
Be sure that you have not set an incoming call
barring option.
The phone starts beeping and “Battery low”
flashes on the display
• Your battery is insufficiently charged. Recharge the
battery.
The audio quality of the call is poor
• Check the signal strength indicator on the display
(
). The number of bars indicates the signal
strength from strong (
) to weak ( ).
• Try moving the phone slightly or moving closer to a
window if you are in a building.
No number is dialled when you re-call a
Phonebook entry
• Use the Contact list menu to ensure the number
has been stored correctly.
• Re-store the number, if necessary.
The battery doesn’t charge properly or the phone
sometimes turns itself off
• Wipe the charging contacts both on the phone and
on the battery with a clean soft cloth.
If the above guidelines do not help you to solve
the problem, take note of:
• The model and serial numbers of your phone
• Your warranty details
• A clear description of the problem
Then contact your local dealer or Samsung after-sales
service.
Health and safety information
SAR certification information
This phone meets European Union (EU) requirements
concerning exposure to radio waves.
Your mobile phone is a radio transmitter and receiver. It is
designed and manufactured to not exceed the limits for
exposure to radio-frequency (RF) energy, as
recommended by the EU Council. These limits are part of
comprehensive guidelines and establish permitted levels
of RF energy for the general population. The guidelines
were developed by independent scientific organisations
through the periodic and thorough evaluation of scientific
studies. The limits include a substantial safety margin
designed to ensure the safety of all persons, regardless of
age and health.
The exposure standard for mobile phones employs a unit
of measurement known as Specific Absorption Rate (SAR).
The SAR limit recommended by the EU Council is 2.0
W/kg.*
The highest SAR value for this model phone was 0.611
W/kg.
99
Health and safety information
SAR tests are conducted using standard operating
positions with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified
power level, the actual SAR level of the phone while
operating can be well below the maximum value. This is
because the phone is designed to operate at multiple
power levels so as to use only the power required to reach
the network. In general, the closer you are to a base
station, the lower the power output of the phone.
Before a new model phone is available for sale to the
public, compliance with the European R&TTE Directive
must be shown. This directive includes as one of its
essential requirements the protection of the health and
safety of the user and any other person.
Precautions when using batteries
•
•
•
•
•
•
* The SAR limit for mobile phones used by the public is 2.0 watts/
kilogram (W/kg) averaged over ten grams of body tissue. The limit
incorporates a substantial margin of safety to give additional
protection for the public and to account for any variations in
measurements. The SAR values may vary, depending on national
reporting requirements and the network band.
100
Never use a charger or battery that is damaged in any
way.
Use the battery only for its intended purpose.
If you use the phone near the network’s base station,
it uses less power. Talk and standby time are greatly
affected by the signal strength on the cellular network
and the parameters set by the network operator.
Battery charging time depends on the remaining
battery charge, the type of battery, and the charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out. When
the operation time is noticeably shorter than normal, it
is time to buy a new battery.
If left unused, a fully charged battery will discharge
itself over time.
Use only Samsung-approved batteries, and recharge
your battery only with Samsung-approved chargers.
Disconnect the charger from the power source when it
is not in use. Do not leave the battery connected to a
charger for more than a week, since overcharging may
shorten its life.
•
•
•
Road safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility.
When using your wireless phone while driving, follow local
regulations in the country or region you are in.
Operating environment
Remember to follow any special regulations in force in the
area you are in, and always switch off your phone
whenever it is forbidden to use it, or when it may cause
interference or danger.
Health and safety information
•
Extreme temperatures will affect the charging capacity
of your battery: it may require cooling or warming
first.
Do not leave the battery in hot or cold places because
the capacity and lifetime of the battery will be
reduced. Try to keep the battery at room temperature.
A phone with a hot or cold battery may not work
temporarily, even when the battery is fully charged. Liion batteries are particularly affected by temperatures
below 0°C (32°F).
Do not short-circuit the battery. Accidental shortcircuiting can occur when a metallic object like a coin,
clip or pen causes a direct connection between the +
and – terminals of the battery (metal strips on the
battery). For example, do not carry a spare battery in
a pocket or bag where the battery may contact metal
objects. Short-circuiting the terminals may damage
the battery or the object causing the short-circuiting.
Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
When connecting the phone or any accessory to another
device, read its user’s guide for detailed safety
instructions. Do not connect incompatible products.
As with other mobile radio transmitting equipment, users
are advised that for the satisfactory operation of the
equipment and for the safety of personnel, it is
recommended that the equipment should only be used in
the normal operating position (held to your ear with the
antenna pointing over your shoulder).
101
Health and safety information
Electronic devices
Other medical devices
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic
equipment may not be shielded against the RF signals
from your wireless phone. Consult the manufacturer to
discuss alternatives.
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is
adequately shielded from external RF energy.
Pacemakers
Switch off your phone in health care facilities when
regulations posted in these areas instruct you to do so.
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations
are consistent with the independent research and
recommendations of Wireless Technology Research. If you
have any reason to suspect that interference is taking
place, switch off your phone immediately.
Hearing aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
wish to consult your hearing aid manufacturer to discuss
alternatives.
102
Your physician may be able to assist you in obtaining this
information.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with
the manufacturer or its representative regarding your
vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted facilities
Switch off your phone in any facility where posted notices
require you to do so.
Emergency calls
Switch off your phone when in any area with a potentially
explosive atmosphere, and obey all signs and instructions.
Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
This phone, like any wireless phone, operates using radio
signals, wireless, and landline networks as well as userprogrammed functions, which cannot guarantee
connection in all conditions. Therefore, you should never
rely solely on any wireless phone for essential
communications like medical emergencies.
Users are advised to switch off the phone while at a
refuelling point (service station). Users are reminded of
the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution
areas), chemical plants, or where blasting operations are
in progress.
Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include the areas
below decks on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas, such as
propane or butane, areas where the air contains chemicals
or particles, such as grain, dust or metal powders, and any
other area where you would normally be advised to turn
off your vehicle engine.
To make or receive calls, the phone must be switched on
and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless phone
networks or when certain network services and/or phone
features are in use. Check with local service providers.
To make an emergency call:
1. Switch on the phone.
2. Key in the emergency number for your present
location. Emergency numbers vary by location.
3. Press [ ].
Health and safety information
Potentially explosive environments
Certain features like Call Barring may need to be
deactivated before you can make an emergency call.
Consult this document and your local cellular service
provider.
103
Health and safety information
Other important safety information
Care and maintenance
•
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for many
years.
•
•
•
•
•
104
Only qualified personnel should service the phone or
install the phone in a vehicle. Faulty installation or
service may be dangerous and may invalidate any
warranty applicable to the device.
Check regularly that all wireless phone equipment in
your vehicle is mounted and operating properly.
Do not store or carry flammable liquids, gases, or
explosive materials in the same compartment as the
phone, its parts, or accessories.
For vehicles equipped with an air bag, remember that
an air bag inflates with great force. Do not place
objects, including installed or portable wireless
equipment, in the area over the air bag or in the air
bag deployment area. Improperly installed wireless
equipment could result in serious injury if the air bag
inflates.
Switch off your phone before boarding an aircraft. It is
dangerous and illegal to use wireless phones in an
aircraft because they can interfere with the operation
of the aircraft.
Failure to observe these instructions may lead to the
suspension or denial of telephone services to the
offender, or legal action, or both.
•
•
•
•
•
Keep your phone and all its parts and accessories out
of the reach of small children and pets. They may
accidentally damage these things or choke on small
parts.
Keep the phone dry. Precipitation, humidity, and
liquids contain minerals that corrode electronic
circuits.
Do not use the phone with a wet hand. Doing so may
cause an electric shock to you or damage to the
phone.
Do not use or store the phone in dusty, dirty areas, as
its moving parts may be damaged.
Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt certain
plastics.
•
•
•
•
•
•
•
•
Use only the supplied or an approved replacement
antenna. Unauthorised antennas or modified
accessories may damage the phone and violate
regulations governing radio devices.
If the phone, battery, charger, or any accessory is not
working properly, take it to your nearest qualified
service facility. The personnel there will assist you, and
if necessary, arrange for service.
Health and safety information
•
Do not store the phone in cold areas. When the phone
warms up to its normal operating temperature,
moisture can form inside the phone, which may
damage the phone’s electronic circuit boards.
Do not drop, knock, or shake the phone. Rough
handling can break internal circuit boards.
Do not use harsh chemicals, cleaning solvents, or
strong detergents to clean the phone. Wipe it with a
soft cloth slightly dampened in a mild soap-and-water
solution.
Do not paint the phone. Paint can clog the device’s
moving parts and prevent proper operation.
Do not put the phone in or on heating devices, such as
a microwave oven, stove, or radiator. The phone may
explode when overheated.
When the phone or battery gets wet, the label
indicating water damage inside the phone changes
colour. In this case, phone repairs are no longer
guaranteed by the manufacturer's warranty, even if
the warranty for your phone has not expired.
If your phone has the flash or light, do not close it too
close to the eyes of people or animals. This may cause
damage to their eyes.
105
Index
A
ABC mode, text input • 28
Active folder • 87
Alarm • 47
Answering
call • 31
second call • 32
Anykey answer • 87
Auto redial • 87
B
Background image • 88
Backlight time, set • 88
Band selection • 92
Barring, calls • 91
Battery
charging • 7
low indicator • 8
precautions • 100
Bluetooth
receiving, data • 95
sending, data • 95
settings • 93
Broadcast messages • 68
Browser, web • 50
106
C
Calculator • 48
Calendar • 75
Call costs • 36
Call records
dialled • 35
missed • 35
received • 35
Call time • 35
Caller group • 38
Caller ID • 89, 92
Calls
answering • 31
barring • 91
diverting • 90
holding • 32
making • 30
redialling • 30
rejecting • 31
waiting • 92
Camera
photos • 79
videos • 82, 83
CB (Cell Broadcast) messages •
68
Characters, enter • 27
Configuration messages • 58
Connection tone • 90
Convertor • 49
Creating messages
e-mail • 56
MMS • 54
SMS • 54
language • 86
layout • 10
settings • 88
Diverting, calls • 90
Document files • 73
DRM (Digital Rights
Management) • 68
DTMF tones, send • 33
D
E
Date, set • 86
Deleting
call records • 35
e-mail • 60, 61, 62
events • 78
MMS • 58, 60, 62
phonebook • 37, 40
SMS • 57, 60, 62
Delivery reports, message •
58, 62
Dialled calls • 35
Display
backlight, set • 88
brightness • 88
icons • 10
E-mails
creating/sending • 56
deleting • 61
setting • 65
viewing • 60
Emergency calls • 103
F
FDN (Fixed Dialling Number)
mode • 96
File manager • 68
File viewer • 73
Folder tone • 90
G
Games • 46
Greeting message • 86
H
Health and safety • 99
Holding, call • 32
Icons, description • 10
Image editor • 45
Images, downloaded • 69
Inbox, messages
e-mail • 60
SMS/MMS • 57
International calls • 30
Internet • 50
J
Java applications • 46
K
Keypad tones
selecting • 89
sending/muting • 33
volume • 89
L
Language, select • 86
Last number, redial • 30
Locking
M
Memory card
accessing files • 75
inserting • 25
Memory status
file manager • 75
messages • 68
phonebook 40
Message tone • 90
Messages
cell broadcast • 68
configuration • 58
e-mail • 56
greeting • 86
MMS • 54, 58
push • 67
SMS • 54, 57
Minute minder • 90
Missed calls • 35
MMS messages
creating/sending • 54
deleting • 58
setting • 63
viewing • 57
MP3 player • 41
Multi-party call • 33
Music, downloaded • 71
N
Names
entering • 27
searching • 36
Network band, select • 92
Network selection • 92
Network services • 90
O
Outbox, messages • 59
P
Password
call barring • 91
phone • 96
Phone
care and maintenance •
104
display • 10
icons • 10
locking • 96
password • 96
resetting • 97
switching on/off • 8
unpacking • 6
Phonebook
copying • 37
deleting • 40
editing • 37
managing • 40
options • 37
speed-dialling • 39
Photos
editing • 45
taking • 79
viewing • 69, 85
PIN, change • 95
PIN2, change • 96
Power on/off tone • 90
Privacy • 96
Problems, solve • 97
Push messages • 58, 67
Index
I
phone • 96
SIM card • 96
Low battery indicator • 8
R
Received calls • 35
Received messages
e-mail • 60
SMS/MMS • 57
Recording
videos • 82
107
Index
voice memos • 44
Redialling
automatically • 87
manually • 30
Resetting phone • 97
Ringer
incoming calls • 89
messages • 90
Road safety • 101
Roaming • 92
S
Safety
information • 99
precautions • 1
Security, calls • 95
Sent messages • 60
SIM card
inserting • 7
locking • 96
SMS messages
creating/sending • 54
deleting • 57
settings • 62
viewing • 57
Sound settings • 89
Sounds, downloaded • 72
108
Speed-dial • 39
Stopwatch • 50
Switching on/off
microphone • 33
phone • 8
T
Templates, message • 61
Text, enter • 27
Time, set • 86
Timer • 49
TV out • 23, 89
V
Videos
recording • 82
viewing • 70, 85
Voice mail server
editing • 92
Voice memos
playing • 44
recording • 44
W
Waiting call • 92
Web browser • 50
World time • 47
* Depending on the software installed or your service provider or country,
some of the descriptions in this guide may not match your phone exactly.
* Depending on your country, your phone and accessories may appear
different from the illustrations in this guide.
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.:GH68-09528A
English(CEN). 03/2006. Rev. 1.0
Download PDF