Samsung | DVD-V642K | Samsung DVD-V642K الدليل السريع

DVD-VCR
Instruction Manual
DVD-V645K
DVD-V642K
Foreword
DVD-VCR Overviews
Connecting Your
DVD-VCR
Setting Up Your
DVD-VCR
KARAOKE Functions
Solving Problems
www.samsungvcr.com
PAL/NTSC
2
3
5
7
8
9
Foreword
This product incorporates copyright protection technology that is
protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation and
other rights owners.
Use of this copyright protection technology must by authorized by
Macrovision Corporized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
The following illustrations represent precautions.
The lightning bolt is a warning sign alerting you to dangerous
voltage inside the product.
DO NOT OPEN THE DVD-VCR. Refer to service personnel.
10%
75%
40°C
H
H
5°C
Foreword
Safety Instructions
❿ Disc Markings
~
• Playback
Region
Number
STEREO
• Stereo
disc
PAL
• PAL colour
system in
Australia,
Newzealand, etc.
NTSC
• NTSC broadcast
system in U.S.A,
Canada, Korea,
Japan, etc.
• Dolby
Digital
disc
• DTS disc
• Disc contains a
Divx software
product
DIGITAL
SOUND
• Digital
Audio disc
Do NOT expose the DVD-VCR
to extreme temperature conditions (below 5°C and above
40°C) or to extreme humidity
conditions (less than 10% and
more than 75%).
Do NOT expose the DVD-VCR
to direct sunlight.
Do NOT expose the DVD-VCR
to any liquids.
Do NOT place any objects on
the DVD-VCR or remote
control.
During a storm and/or lightning, unplug the DVD-VCR
from the mains socket and
aerial.
If the remote control is not
used for a long period of time,
remove the batteries and store
it in a cool, dry place.
❿ Play Region Number
Both the DVD player and the discs are coded by region. These regional codes
must match in order for the disc to play. If the codes do not match, the disc will
not play.
The Region Number for this player is described on the rear panel of the
player.
❿ Progressive Scan Outputs (525p/625p)
“Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture,
in case of 525 or 625 progressive scan picture problems, it is recommended
that the user switch the connection to the ‘STANDARD DEFINITION’ output. If
there are questions regarding our TV set compatibility with this model 525p and
625p DVD player, please contact our customer servise center.”
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL
ENVIRONMENTS
2
DVD-VCR Overviews
Accessories
This DVD player is capable of playing the following types of discs with the corresponding logos :
Disc Types
(Logos)
Recording
Types
Max.
Playing
Time
12 Cm
Single-sided
240 min.
Double-sided
480 min.
Characteristics
REMOTE CONTROL
& BATTERIES
AUDIO & VIDEO
CABLE ★(DVD-V645K only)
AUDIO & VIDEO
CABLE ★(DVD-V642K only)
OWNER’S
INSTRUCTIONS
/ON
DBY
STAN
Disc Size
You have just purchased a SAMSUNG Video Cassette Recorder (DVD-VCR).
Together with your DVD-VCR, you will find the following accessories in the box.
Audio
+
Video
8 Cm
Single-sided
80 min.
Double-sided
160 min.
• DVD contains excellent
sound and video due to
Dolby Digital and MPEG-2
system.
• Various screen and audio
functions can be easily
selected through the onscreen menu.
E
/CLOS
OPEN
DVD
Front View of the DVD-VCR
1
VIDEO-CD
12 Cm
3
4
74 min.
• Video with CD sound, VHS
quality & MPEG-1 compression technology.
Audio
+
Video
8 Cm
AUDIO-CD
2
20 min.
12 Cm
74 min.
8 Cm
20 min.
Audio
• An LP is recorded as an
analog signal with more
distortion. CD is recorded
as a Digital Signal with
better audio quality, less
distortion and less deterioration of audio quality
over time.
* DO NOT play CD-ROM, CD-I and DVD-ROM in this player!
(CDGs play audio only, not graphics.)
* It may not be to play CD-R,CD-RW and DVD-R in all cases due to the type of disc or condition of the recording.
5
1
2
3
4
5
6
7
8
6
7 8 9 10 11
12
DVD DECK
OPEN / CLOSE BUTTON
VIDEO CASSETE COMPARTMENT
EJECT BUTTON
STANDBY / ON BUTTON
REW / SKIP BACK BUTTON
STOP BUTTON
PLAY / STILL BUTTON
14
9
10
11
12
13
14
15
16
13
14
15
16
DVD-VCR Over views
Disc Type and Characteristics
F.F / SKIP NEXT BUTTON
RECORD BUTTON
COPY BUTTON
DVD / VCR SELECT BUTTON
PROGRESSIVE BUTTON
VOLUME + / - BUTTON
ECHO BUTTON
MIC JACK
3
DVD-VCR Overviews
Infrared Remote Control
1
2
STANDBY/ON
OPEN/CLOSE
1
3
4
5
6
7
17
18
2
1
STANDBY/ON
2
SHUTTLE << / >>
3
CLEAR
4
DVD VIEW
5
VCR VIEW
6
AUDIO
7
VOLUME
8
REWIND, SKIP BACK
9
STOP
10
SUBTITLE
11
MENU
12
OK/DIRECTION
13
SPEED
KARAOKE SEARCH
1
2
3
4
LINE IN 1
LINE OUT TO TV (COMPOSITE)
AUDIO LINE OUT TO TV
(S-VIDEO OR COMPONENT)
DIGITAL AUDIO OUT SOCKET
(COAXIAL)
5
6
7
COMPONENT VIDEO OUT
DIGITAL AUDIO OUT SOCKET
(OPTICAL)
S-VIDEO OUT JACK
Rear View of the DVD-VCR (DVD-V642K)
1
KARAOKE
3
19
4
5
20
PROG / TRK
VOLUME
6
21
7
22
14
RECORD
8
9
23
15
TEST
24
25
16
ANGLE/IPC
26
17
OPEN/CLOSE
10
11
2
18
0-9 NUMBER
12
19
KARAOKE
13
14
15
16
20
INPUT SEL.
21
F.ADV/STEP
22
PROG/TRK
23
FAST-FORWARD, SKIP NEXT
24
PLAY/STILL
25
IMFO.
26
RETURN
27
EZ VIEW
28
DISC MENU
29
MARK/SEARCH
30
MODE/REPEAT
OK
3
1
2
3
4
LINE IN 1
LINE OUT TO TV (COMPOSITE)
AUDIO LINE OUT TO TV
(S-VIDEO OR COMPONENT)
DIGITAL AUDIO OUT SOCKET
(COAXIAL)
5
6
7
4
5
6
7
COMPONENT VIDEO OUT
DIGITAL AUDIO OUT SOCKET
(OPTICAL)
S-VIDEO OUT JACK
27
28
29
30
DVD-VCR Over views
Rear View of the DVD-VCR (DVD-V645K)
/
4
Connecting Your DVD-VCR
Connecting DVD-VCR to a Satellite
Receiver or Other Equipment
You can connect your DVD-VCR to the television using the
A/V cable if the appropriate input is available on the television. You thus:
• Obtain better quality sound and pictures
• Simplify the setting up procedure of your DVD-VCR
• Regardless of the type of connection chosen, you must
always connect the coaxial cable supplied. Otherwise, no
picture will be visible on the screen when the DVD-VCR is
switched off.
• Make sure that both the television and the DVD-VCR are
switched off before connecting the cables.
1. Connect the coaxial cable as indicated in the above
section.
2. Connect one end of the Audio/Video cable to the Video
output and Audio L, R output socket on the rear of the
DVD-VCR.
3. Plug the other end into the appropriate connector on the
television.
4. To view DVD-VCR, you must select AV mode on your TV.
You can connect other audio and/or video equipment to your
DVD-VCR in different ways. The following illustrations give a
few examples of the connection possibilities.
• The AV input/output connectors on the rear of the DVDVCR are used for equipment, such as camcorders, VCRs
or sound systems.
Connecting Your DVD-VCR
Connecting DVD-VCR to the TV using the
A/V Cable
CAMCORDER
R
L
AUDIO
VIDEO
VIDEO
R
L
AUDIO
R
L
AUDIO OUT
Y
PR
PB
COMPONENT VIDEO OUT
5
Setting Up Your DVD-VCR
Selecting the Cassette Type
The DVD-VCR allows you to copy the contents of a DVD to a VHS tape with a press of the
COPY button.
If you wish to use the tape counter to display the time remaining on a cassette, you
must indicate the type of cassette inserted.
If the DVD you are attempting to copy is copy protected, you will not be able to copy the disc. It
is not permitted to copy Macrovision® encoded DVDs.
1 After pressing the menu press the corresponding ❷ buttons to select the VCR
option.
2 Press the OK or ❿ buttons to select this option.
Result: The VCR Setup menu is displayed.
3 Press the corresponding or ❷ buttons, until the Tape Select option is selected.
4 Press the OK or ❿ buttons as many times as required, until the correct cassette
length is displayed.
E180
E240
E 300
E260
5 Press RETURN twice to exit the menu.
1 Insert Disc
Insert the disc you wish to copy in the DVD deck and close the drawer.
2 Insert VHS Tape
Insert a blank VHS videotape into the VCR deck.
3 Copy the DVD to VHS Tape
Press the COPY button on the DVD-VCR front panel.
• The DVD will go into Play mode and the VCR will go into Record mode.
• If the DVD disc menu appears, you may need to press the PLAY button manually to
begin copying.
4 Stop the Copy Process
When the DVD is finished playing, press the VCR button on the remote control and then
press the STOP button to end the copy.
• You must stop the Copy process manually when the DVD movie ends or the DVD may
replay and record over and over again.
Repeat Play
You can set repeat play to repeat the tape continuously from beginning to end.
To...
Press OK or ❿, until...
Repeat play
On is displayed.
Do not wish to repeat play Off is displayed.
Setting Up Your DVD-VCR
Copying from DVD to VCR
6
Setting Up Your DVD-VCR
You can record a cassette at two different speeds:
◆ SP (Standard Play)
◆ LP (Long Play)
In Long Play modes:
◆ Each cassette lasts twice as long
◆ The recording is of a slightly lower quality
To record a cassette...
Press the SPEED button on the
remote control, until...
In standard play mode
SP is displayed.
In long play mode
LP is displayed.
Type
Recording Time (in SP)
E-180
180 mins. or 3 hours
E-240
240 mins. or 4 hours
E-260
260 mins. or 4 hours
and 20 mins.
E-300
300 mins. or 5 hours
Setting Up the Language Features
If you set the player menu’s, disc menu, audio and subtitle language in advance,
they will come up automatically every time you watch a movie.
❿ Using the Disc Menu Language
This function changes the text language only on the disc menu screens.
❿ Using the Audio Language
1
2
3
4
5
With the unit in Stop mode, press the MENU button.
Select DVD using ❷ buttons, then OK or ❿ button.
Select Language Setup using ❷ buttons, then press the OK or ❿ button.
Select Audio using ❷ buttons, then press the OK or ❿ button.
Press the ❷ buttons to select English.
- Select “Original” if you want the default soundtrack language to be the original
language the disc is recorded in.
- Select “Others” if the language you want is not listed..
6 Press the OK button.
- English is selected and the screen returns to Language Setup menu.
❿ Using the Subtitle Language
Setting Up Your DVD-VCR
Selecting the Recording Speed
1
2
3
4
5
With the unit in Stop mode, press the MENU button.
Select DVD using ❷ buttons, then OK or ❿ button.
Select Language Setup using ❷ buttons, then press the OK or ❿ button.
Select Subtitle using ❷ buttons, then press the OK or ❿ button.
Use the ❷ buttons to select English.
- Select “Automatic” if you want the subtitle language to be the same as the
language selected as the audio preference.
- Select “Others” if the language you want is not listed. Some discs may not
contain the language you select as your initial language; in that case the disc
will use its original language setting.
6 Press the OK button.
- English is selected and the screen returns to Language Setup menu.
1
2
3
4
5
With the unit in Stop mode, press the MENU button.
Select DVD using ❷ buttons, then OK or ❿button
Select Language Setup using ❷ buttons, then press the OK or ❿ button.
Select Disc Menu using ❷ buttons, then press the OK or ❿ button.
Use the ❷ buttons to select ‘English’.
- Select “Others” if the language you want is not listed.
6 Press the OK button.
- English is selected and the screen returns to Language Setup menu.
7
KARAOKE Functions
DVD Functions
Using the KARAOKE Function
Beginning Karaoke Functions
1 Press the standby/on button and insert KARAOKE tape.
2 Connect Mic into MIC1 or MIC2 jack.
Then the KARAOKE mode is transferred “ON” mode.
◆ Disconnect the Mic makes the KARAOKE mode transfer to “OFF” mode automatically.
◆ Press the KARAOKE button on the remote control.
Press the ➛ or ❿ button to select KARAOKE mode “ON”.
3 Adjust the Mic volume and ECHO level.
4 Sing with accompaniment.
1 Connect the Mixed Audio Out terminals with the TV or AMP.
2 Press the STANDBY/ON button.
3 Connect Mic into Mic 1 or Mic 2 jack. Then the karaoke mode is transferred
to ON mode.
- To disconnect the Mic makes the karaoke mode transfer to OFF mode automatically.
➢ • This function operates only in DVD, VCD, and CD DISC.
• This function cannot operate according to the disc type.
Key Control
SCORE Function
1 Press the KARAOKE button on the remote
control.
2 Press the corresponding or ❷ buttons to
select the SCORE mode.
3 Press the ➛ or ❿ buttons to select the SCORE
KARAOKE :ON ➛❿
:ON ➛❿
❿ SCORE
mode “ON”.
4 Score will pop up whenever a song is completed.
KARAOKE SEARCH Function
1 Press the STANDBY/ON button and insert KARAOKE tape.
2 Press the KARAOKE button on the remote control.
Press the ➛ or ❿ button to select KARAOKE mode “ON”.
3 Press ❿II to start playing the cassette.
4 When you want the next song during playing a song, press the KARAOKE
SEARCH ➛➛ or KARAOKE SEARCH ❿❿ buttons on the remote control.
1 Press the KARAOKE button.
2 Select the “Keycon” using the ➛ or ❿ buttons.
3 By use of the ➛ or ❿ buttons, change to the desired tone.
- : To let 7 scales down by half scale.
- : Original scale.
- # : To let 7 scales up by half scale.
➢ • This function operates only in DVD, VCD, and CD DISC.
• This function cannot operate according to the disc type.
KARAOKE Functions
VCR Functions
Reserving a Song
It is the function to reserve the desired song in advance by use of Karaoke
function.
1
2
3
4
Playback the Karaoke Disc containing the wanted songs.
Press the KARAOKE button on the remote control.
Select the “Request” using the ➛ or ❿ buttons, then press OK button.
Input the number (Track No.) of the desired song into the flickering part(--).
- You can reserve up to 10 songs.
3 When you want the next reserved song during playing a song, press the ❿I
button.
➢ When the request is ended, the mode changes to STOP mode.
8
Solving Problems
Troubleshooting Guide (DVD)
Problem
No power
Before requesting service (troubleshooting)
Explanation/Solution
Check that the power plug is connected to a wall outlet.
Disc does not
play.
Ensure that the disc is installed with the label side facing up.
Check the region number of the DVD.
This player cannot play CD-ROMs, DVD-ROMs, etc. Insert a DVD, a CD.
5.1 channel sound
is not being
reproduced.
5.1 channel sound is reproduced only when the following conditions are met. :
1) The DVD-VCR player is connected with the proper amplifier
2) The disc is recorded with 5.1 channel sound.
Check whether the disc being played has the “Dolby 5.1 ch” mark on the outside.
Check if your audio system is connected and working properly.
Have you pressed the STANDBY/ON button?
You cannot insert a video cassette
A video cassette can only be inserted with the window
side up and the safety tab facing you.
You cannot insert a video cassette
A video cassette can only be inserted with the window
side up and the safety tab facing you.
No playback picture or the picture
Check to see if you are using a prerecorded tape.
The
icon
appears on
screen.
is distorted
Noise bars or streaks on playback
Press the TRK (
or ) buttons to minimize this effect.
When the ❿II button is pressed
A still picture may have “noise bars”, depending on the
during playback, the still picture
condition of the tape. Press the TRK (
has severe “noise bars” streaks
buttons during SLOW motion to minimize this effect.
Video Head Cleaning
If poor pictures appear on a variety of cassettes, the
or
)
Playback mode differs from the Setup
Menu selection.
Some of the functions selected in the Setup Menu may not work properly
if the disc is not encoded with the corresponding function.
The screen ratio
cannot be changed.
The Screen Ratio is fixed on your DVDs.
No audio.
Make sure you have selected the correct Digital Output in the Audio
Options Menu.
Forgot password
Press power on from a cold start with no disc in the unit. Press the ➛➛
and ❿❿ buttons simultaneously on the front panel for five seconds. Switch
off and on the DVD-VCR by pressing STANDBY/ON button. The Parental
Mode is now unlocked as indicated on the display. You can now set your
rating level and change your password to a new number.
If you experience
other problems.
Go to the contents and find the section of the instruction book that contains
the explanations regarding the current problem, and follow the procedure
once again.
If the problem still cannot be solved, please contact your nearest
authorized service center.
video heads may need cleaning. This is not a
common problem and unless it appears, the heads
The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is out of
range.
Solving Problems
Problems and Solutions (VCR)
Before contacting the Samsung after-sales service, perform the following simple checks.
should not be cleaned. When cleaning the video
heads, read all instructions provided with the head
cleaning cassette. Incorrect head cleaning can
permanently damage the video heads.
If you are unable to solve the problem after reading the above instructions, note:
The model and serial number on the rear of your DVD-VCR
The warranty information
A clear description of the problem
Then contact your nearest SAMSUNG after-sales service.
9
Download PDF

advertising