Samsung | SC6780 | Samsung SC6780 دليل المستخدم (TAWIL)

Vacuum Cleaner
user manual
✻ Before operating this unit, please read the instructions carefully.
✻ For indoor use only.
English
imagine the possibilities
Thank you for purchasing a Samsung product.
To receive a more complete service,
please register your product at
www.samsung.com/register
Code No. DJ68-00474M REV(0.0)
DJ68-00474M.indb
1
2009.9.7
5:5:14 PM
safety information
SAFETY INFORMATION
•
•
WARNING
Before operating the appliance, please read this manual thoroughly and retain
it for your reference.
WARNING
Because these following operating instructions cover various models,
the characteristics of your vacuum cleaner may differ slightly from those
described in this manual.
CAUTION/WARNING SYMBOLS USED
WARNING
CAUTION
Indicates that a danger of death or serious injury exists.
Indicates that a risk of personal injury or material damage exists.
OTHER SYMBOLS USED
Represents something you must NOT do.
Represents something you must follow.
Indicates that you must disconnect the power plug from the socket.
2_ safety information
DJ68-00474M.indb
2
2009.9.7
5:5:15 PM
safety information
IMPORTANT SAFEGUARDS
1. Read all instructions carefully. Before switching on, make sure that the voltage of your
electricity supply is the same as that indicated on the rating plate on the bottom of the
cleaner.
2. WARNING : Do not use the vacuum cleaner when rug or floor is wet.
Do not use to suck up water.
3. Close supervision is necessary when any appliance is used by or near children. Do not
allow the vacuum cleaner to be used as a toy. Do not allow the vacuum cleaner to run
unattended at any time. Use the vacuum cleaner only for its intended use as described
in these instructions.
4. Do not use the vacuum cleaner without a dust bin. Empty the dust bin before it is full in
order to maintain the best efficiency.
5. Slide to the Stop(or Min)position before inserting a plug into the electrical outlet.
6. Do not use the vacuum cleaner to pick up matches, live ashes or cigarette butts. Keep
the vacuum cleaner away from stoves and other heat sources. Heat can deform and
discolour the plastic parts of the unit.
7. Avoid picking up hard, sharp objects with the vacuum cleaner as they may damage
the cleaner parts. Do not stand on the hose assembly. Do not put weight on the hose.
Do not block the suction or the exhaust port.
8. Switch the vacuum cleaner off on the body of the machine before unplugging from the
electrical outlet. Disconnect the plug from the electrical outlet before changing the dust
bag or dust container. To avoid damage, please remove the plug by grasping the plug
itself, not by pulling on the cord.
9. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
10. The plug must be removed from the socket outlet before cleaning or maintaining the
appliance.
11. The use of an extension cord is not recommended.
12. If your vacuum cleaner is not operating correctly, switch off the power supply and
consult an authorized service agent.
13. If the supply cord is damaged, it must be replaced by the manufacturer or its service
agent or a similarly qualified person in order to avoid a hazard.
14. Don’t carry the vacuum cleaner by holding the hose. Use the handle on the vacuum
cleaner set.
safety information _3
DJ68-00474M.indb
3
2009.9.7
5:5:15 PM
contents
assembling the cleaner
05
Assembling the Cleaner
06
07
Power cord
Power control
08
09
11
12
14
14
Using accessory
Maintain floor tools
Emptying the dust bin
Cleaning the dust pack
Cleaning the motor protection filter
Cleaning the outlet filter
05
operating the cleaner
06
maintain tools and filter
08
troubleshooting
16
4_ contents
DJ68-00474M.indb
4
2009.9.7
5:5:15 PM
assembling the cleaner
OPTION
OPTION
▼
01 ASSEMBLING THE CLEANER
Features may vary according to model.
• P
lease do not press the button
of dust bin handle when carrying
machine.
• For storage, park the floor nozzle.
assembling the cleaner _5
DJ68-00474M.indb
5
2009.9.7
5:5:18 PM
operating the cleaner
POWER CORD
CAUTION
• When removing the plug from the electrical outlet, grasp the
plug, not the cord.
6_ operating the cleaner
DJ68-00474M.indb
6
2009.9.7
5:5:19 PM
POWER CONTROL
02 operating the cleaner
SILDE CONTROL TYPE ONLY (Optional)
• SLIDE TO THE STOP POSITION
Vacuum-cleaner switches off (stand by mode)
• SLIDE FORWARD TO MAX
Suction capacity increases smoothly up to maximum.
BODY-CONTROL TYPE / ON/OFF TYPE
To reduce suction for cleaning draperies, small rugs,
and other light fabrics, pull the tap air until the hole is
open.
BODY-control type (Only)
On/Off type (Only)
MIN = For delicate surface e.g. net
curtains.
MAX = For hard floors and heavily
soiled carpets.
operating the cleaner _7
DJ68-00474M.indb
7
2009.9.7
5:5:22 PM
maintain tools and filter
using accessory
Accessory (option)
• P
ush the accessory on to the end of the hose handle.
• Pull out and turn the dusting brush for cleaning delicate areas.
• T
o use the upholstery tool, push the accessory on to the end of the hose handle in the
opposite direction.
Pipe
• Adjust the length of the telescopic pipe by sliding
the length control button located in the center of the
telescopic pipe back and forth.
• T
o check for blockages, separate the telescopic pipe
and adjust to shorten. This allows for easier removal
of waste clogging the tube.
8_ maintain tools and filter
DJ68-00474M.indb
8
2009.9.7
5:5:30 PM
MAINTAIN FLOOR TOOLS (Option)
< Option >
03 maintain tools and filter
Carpet Cleaning
Floor Cleaning
• Adjust the inlet lever according to the floor surface.
• Remove waste matter completely if the inlet is blocked.
< Option >
1
For improved
pickup of pet
hair and fibre on
carpets
4
2
5
3
6
Frequent vacuuming of hair or pet fur may cause a falling-off of the rotation due to
matters tangled around the drum. In this case, clean the drum with care.
1. Push the Open button of the transparent screen cover to separate the cover.
2. Remove the brushbar from the transparent screen.
3. Remove waste matter such as dust and hair tangled around the brushbar using scissors.
4. Remove dust inside the brush housing using a dry duster or crevice tool.
5. Insert brushbar into rotating belt and assemble.
6. Click the transparent screen cover back into place to reassemble.
maintain tools and filter _9
DJ68-00474M.indb
9
2009.9.7
5:5:41 PM
maintain tools and filter
< Option >
• Detach transparent drum cover for easy cleaning.
< Option >
1
For picking up pet hair
and fibre on upholstery
and bed linen.
2 Turbine
3
Brush
Clogs on turbine keeps brush from turning, and in this case, take care of it.
1. Remove waste matter completely when inlet is blocked.
2. Turn the lock button to ‘UNLOCK’, and remove
3. To reassemble, align the cover to the front of the main body and close. After closing the
cover, ensure that the lock button is turned to the ‘LOCK’ position.
WARNING
Use for bedclothes only. Be cautious not to damage brush during unclogging.
10_ maintain tools and filter
DJ68-00474M.indb
10
2009.9.7
5:5:46 PM
emptying the dust bin
2
3
Once dust reaches the dust full
mark, or once the dust full light
is on, empty the dust bin.
Take the dust bin out by
pressing the button.
Separate the dust bin cover.
4
5
6
Close the dust bin cover.
Before use, push the dust bin
into the main body of the
vacuum cleaner and push cover
until you hear the "click" sound.
Throw away dust in the bin.
03 maintain tools and filter
1
- Empty into a plastic bag
(recommended for asthma/allergy sufferers)
You may rinse the dust bin
with cold water.
maintain tools and filter _11
DJ68-00474M.indb
11
2009.9.7
5:5:55 PM
maintain tools and filter
CLEANING THE DUST PACK
WHEN TO CLEAN THE DUST PACK
• If suction is noticeably reduced during cleaning, please check the dust pack as
indicated below.
Turn the vacuum power to 'MAX'.
Handle Control
POWER CONTROL
• If the filter check indicator turns red with the inlet floating
10 cm above flat floor, clean it.
• W
hen the indicator light comes on, please empty the
Dust Pack as shown in the following illustrations.
12_ maintain tools and filter
DJ68-00474M.indb
12
2009.9.7
5:6:0 PM
CLEANING THE DUST PACK
2
3
Remove the dust bin and
dust pack as shown.
Remove the fixed frame
of the dust pack cover.
Remove the sponge and
filter from the dust pack.
4
5
6
Wash the sponge and the
filter of the dust pack with
water.
Let the sponge and filter dry
in the shade for more than
12 hours.
Put the sponge and filter into
the dust pack.
7
8
Before reassembly, align the
dust pack cover and dust
pack correctly.
Put the assembled dust pack into the main body.
03 maintain tools and filter
1
Make sure the filter is completely dry before putting it back into the vacuum
cleaner. Allow 12 hours for it to dry.
maintain tools and filter _13
DJ68-00474M.indb
13
2009.9.7
5:6:4 PM
maintain tools and filter
CLEANING THE MOTOR PROTECTION FILTER
• Take out both the dust bin and the dust pack.
• R
emove the motor protection filter from the vacuum
cleaner. Shake and tap the dust from it and put back
in machine.
CLEANING THE OUTLET FILTER
1. Press the fixed frame part at the back of the main
body to remove.
2. P
ull out the HEPA Filter using the tab.
Clean the HEPA filter.
1
2
3. P
ut the HEPA filter into the main body until you hear a
‘click’ sound.
3
14_ maintain tools and filter
DJ68-00474M.indb
14
2009.9.7
5:6:5 PM
MICRO CARBON FILTER (OPTION)
Remove and replace the blocked
outlet filter.
03 maintain tools and filter
Replacement filters are available at
your local Samsung distributor.
maintain tools and filter _15
DJ68-00474M.indb
15
2009.9.7
5:6:6 PM
troubleshooting
- IF YOU HAVE A PROBLEM
PROBLEM
REMEDY
Motor does not start.
Check cable, plug and socket.
Leave to cool.
Suction force is gradually
decreasing.
Check for blockage and remove.
Cord does not rewind fully.
Pull the cord out 2-3m and push down the cord rewind
button.
Vacuum cleaner does not pick
up dirt.
Check hose and replace if required.
Low or decreasing suction.
Please check filter and, if required, clean as illustrated
in the instructions. if filters are out of condition change
them to new ones.
Body overheating.
Please check filters, If required clean as illustrated in the
instruction.
Static electicity discharge.
Please decrease power suction.
DJ68-00474M.indb
16
2009.9.7
5:6:6 PM
www.samsung.com/ae
DJ68-00474M.indb
1
2009.9.7
5:6:10 PM
DJ68-00474M.indb
2
2009.9.7
5:6:11 PM
DJ68-00474M.indb
3
2009.9.7
5:6:13 PM
DJ68-00474M.indb
4
2009.9.7
5:6:16 PM
DJ68-00474M.indb
5
2009.9.7
5:6:18 PM
DJ68-00474M.indb
6
2009.9.7
5:6:27 PM
DJ68-00474M.indb
7
2009.9.7
5:6:34 PM
DJ68-00474M.indb
8
2009.9.7
5:6:47 PM
DJ68-00474M.indb
9
2009.9.7
5:6:55 PM
DJ68-00474M.indb
10
2009.9.7
5:6:58 PM
DJ68-00474M.indb
11
2009.9.7
5:7:0 PM
DJ68-00474M.indb
12
2009.9.7
5:7:4 PM
DJ68-00474M.indb
13
2009.9.7
5:7:4 PM
DJ68-00474M.indb
14
2009.9.7
5:7:5 PM
DJ68-00474M.indb
15
2009.9.7
5:7:6 PM
Code No. DJ68-00474M REV(0.0)
DJ68-00474M.indb
16
2009.9.7
5:7:7 PM
Download PDF