Samsung | CS-21K9ML | Samsung CS-21K9ML User guide

KS1A(03123A)ENG_UMG
12/29/03
6:51 PM
ELECT
Page 1
COLOUR
TELEVISION
CS14C8/14F3/14F10/14H4/14Y5
CS15K2/15K5/15K8/15K9/15M16
CS17A11/17N11
CS2038/2039/2073/2085
20F1/20F3/20F10/20H4/20S1/20V5
CS2139/2173/2185/21D8/21D9
21F3/21F5/21F10/21H4/21K2/21K3/21K5/21K9
21M16/21M20/21S4/21V5/21V10
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
REMOTE CONTROL
ON-SCREEN MENUS
ENJOY GAME (depending on the model)
TELETEXT FUNCTION (depending on the model)
KS1A(03123A)ENG_UMG
12/29/03
6:51 PM
Page 2
Safety Instructions
ENG
◆ Do not expose the television to extreme temperature conditions or to extreme humidity conditions.
◆ Do not expose the television to direct sunlight and other sources of heat.
◆ Do not expose the television to any liquids.
◆ Never put objects of any kind into the television, and do not place a water-containing vessel on the
television.
◆ During a storm conditions (especially when there is lightning) unplug the television from the mains
socket and aerial.
◆ Do not step on or twist the power cord.
◆ Do not overload wall outlets or extension cords as this can result in a risk of fire or electric shock.
◆ Please use a soft and dry cloth (not containing volatile matter) when you clean the TV.
◆ If the television is broken, do not try to repair it yourself. Contact qualified service personnel.
◆ If the remote control is not used for a long period of time, remove the batteries and store it in a
cool, dry place.
◆ Do not drop the remote control.
This device is not for use in industrial environments.
Caution
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
CAUTION: TO PREVENT ELECTRICAL SHOCK, DO
NOT REMOVE REAR COVER, NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
WARNING:
TO PREVENT DAMAGE WHICH MAY
RESULT IN FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
2
The lightning flash and arrow head
within the triangle is a warning sign
alerting you of “dangerous voltage”
inside the product.
The exclamation point within the
triangle is a warning sign alerting
you of important instructions
accompanying the product.
☛
!
The main voltage is indicated on the rear
of the TV set and the frequency is 50 or
60Hz.
KS1A(03123A)ENG_UMG
12/29/03
6:51 PM
Page 3
ENG
Contents
◆ PREPARING YOUR TELEVISION
■
Safety Instructions .........................................................................................
■
Caution ..........................................................................................................
■
Front Panel Controls (depending on the model)............................................
■
Using the Buttons on the Front Panel............................................................
■
Connection Panels ........................................................................................
■
Infrared Remote Control (All Functions Except Teletext) ..............................
■
Infrared Remote Control (Teletext Functions) ...............................................
■
Inserting the Batteries in the Remote Control................................................
■
Connecting the Aerial or Cable Television Network ......................................
■
Switching Your Television On and Off...........................................................
■
Placing Your Television in Standby mode .....................................................
■
Plug & Play Feature (depending on the model).............................................
■
Choosing Your Language..............................................................................
2
2
4
4
5
6
7
8
8
9
9
10
11
◆ SETTING UP THE CHANNELS
■
Storing the Channels Automatically...............................................................
■
Selecting a Channel Numbered Ten or Over ................................................
■
Storing the Channels Manually......................................................................
■
Skipping Unwanted Channels .......................................................................
■
Fine tuning Channel Reception .....................................................................
■
Sorting the Stored Channels .........................................................................
12
12
13
14
15
16
◆ USING THE TELEVISION
■
Changing the Picture Standard .....................................................................
■
Selecting the Picture Format (depending on the model) ...............................
■
Adjusting the Picture Settings .......................................................................
■
Changing the Sound Standard (depending on the model) ............................
■
Adjusting the Sound Settings (depending on the model) ..............................
■
Adjusting the Volume (depending on the model)...........................................
■
Extra Sound Settings (depending on the model)...........................................
(Auto Volume/Melody/Pseudo Stereo/Turbo Sound)
■
Selecting the Sound Mode (depending on the model) ..................................
■
Switching the Sound Off Temporarily ............................................................
■
Setting the Sleep Timer .................................................................................
■
Setting and Displaying the Current Time (depending on the model).............
■
Switching the Television On and Off Automatically (depending on the model) ...
■
Activating the Child Lock ...............................................................................
■
Setting the Blue Screen Mode.......................................................................
■
Enjoying Games (depending on the model) ..................................................
22
23
23
24
25
26
27
28
◆ USING THE TELETEXT FUNCTION (depending on the model)
■
Teletext Decoder ...........................................................................................
■
Displaying Teletext Information .....................................................................
■
Selecting a Specific Teletext Page ................................................................
■
Using FLOF to Select a Teletext Page ..........................................................
■
Storing Teletext Pages ..................................................................................
29
29
30
31
31
◆ INFORMATION ON CONNECTIONS AND RECOMMENDATIONS FOR USE
■
Viewing Pictures From External Sources ......................................................
■
Connecting to the Audio/Video Input/Outputs ...............................................
■
Automatic Degaussing to Remove Color Patches.........................................
■
Troubleshooting: Before Contacting Service Personnel................................
32
33
34
34
Symbols
Press
☛
➢
Important
Note
3
17
17
18
19
20
20
21
KS1A(03123A)ENG_UMG
12/29/03
6:51 PM
Page 4
Front Panel Controls (depending on the model)
➣
ENG
1
2
1
Buttons and markings are subject to change.
4
3
1
6
2
5
4
3
2
5
6
5
3
6
4
!
MENU DISPLAY
$
REMOTE CONTROL SENSOR
@
VOLUME ADJUSTMENT
%
STAND-BY INDICATOR
#
CHANNEL SELECTION
^
POWER
Using the Buttons on the Front Panel
If your remote control no longer works or you have lost it, you can
use the controls on the front panel of the television to:
◆ Switch on the television when it is in Standby mode and
select channels ( ▼ CH ▲ )
◆ Access the main menu ( MENU )
◆ Adjust the volume ( - VOL + )
Buttons on the front panel have the same function as corresponding
buttons on the remote control.
4
KS1A(03123A)ENG_UMG
12/29/03
6:51 PM
Page 5
Connection Panels
➢
The actual configuration on your TV may be different, depending on
your model.
ENG
Front (or Side) of TV
RCA AUDIO/VIDEO INPUT
CONNECTORS
➢
Connecting earphones (
) /headphones (
)
◆ You can connect a set of earphones/headphones to your television if you wish to watch a
television programme without disturbing the other people in the room.
◆ Prolonged use of earphones/headphones at a high volume may damage your hearing.
Rear of TV
VIDEO
OUTPUT
AUDIO
VIDEO
INPUT
INPUT
A
OUTPUT
AUDIO
B
C
B
C
B
B
C
C
B
(MONO)
VIDEO AUDIO
VIDEO L-AUDIO-R
MONITOR
-OUT
MONITOR
-OUT
INPUT
INPUT
A) SCART AUDIO/VIDEO INPUT/OUTPUT CONNECTOR
B) 75Ω COAXIAL CONNECTOR FOR AERIAL/CABLE NETWORK
C) RCA AUDIO/VIDEO INPUT/OUTPUT CONNECTORS
5
KS1A(03123A)ENG_UMG
12/29/03
6:52 PM
Page 6
Infrared Remote Control (All Functions Except Teletext)
➣
ENG
Buttons and markings are subject to change.
POWER
DIRECT CHANNEL SELECTION
ONE/TWO-DIGIT CHANNEL
SELECTION
VOLUME INCREASE
TEMPORARY SOUND SWITCHOFF
SWITCH REPEATEDLY
BETWEEN THE LAST TWO
CHANNELS DISPLAYED
NEXT CHANNEL
EXTERNAL INPUT SELECTION
VOLUME DECREASE
PREVIOUS CHANNEL
TUNER/CABLE NETWORK
SELECTION
ON-SCREEN DISPLAY
EXIT FROM ANY DISPLAY
MENU DISPLAY
MOVE TO THE REQUIRED
MENU OPTION/
ADJUST AN OPTION VALUE
RESPECTIVELY
CHANGE CONFIRMATION/
SOUND MODE SELECTION
(OPTION)
GAME DISPLAY (OPTION)
PICTURE SIZE
AUTOMATIC SWITCH-OFF
TURBO SOUND ON/OFF
(OPTION)
PICTURE STANDARD
SOUND MENU DISPLAY
(OPTION)
SOUND STANDARD (OPTION)
➣
Operation of remote control may be affected by bright artificial light near to the TV set.
6
KS1A(03123A)ENG_UMG
12/29/03
6:52 PM
Page 7
Infrared Remote Control (Teletext Functions)
➣
Buttons and markings are subject to change.
ENG
TELETEXT HOLD
TELETEXT NEXT PAGE
LIST/FLOF MODE SELECTION
TELETEXT PREVIOUS PAGE
TELETEXT REVEAL
PROGRAMME SELECTION BY
NAME
TELETEXT SUB-PAGE
TELETEXT DISPLAY/MIX
PICTURE SIZE
TELETEXT STORE
FASTEXT TOPIC SELECTION
7
KS1A(03123A)ENG_UMG
12/29/03
6:52 PM
Page 8
Inserting the Batteries in the Remote Control
ENG
You must insert or replace the batteries in the remote control when
you :
◆ Purchase the television.
◆ Find that the remote control is no longer operating
correctly.
1
Remove the cover of the remote control by pressing the symbol
( ) and pulling the cover in the direction of the arrow.
2
Insert batteries, taking care to respect the polarities:
◆
◆
3
+ on the battery with + on the remote control
- on the battery with - on the remote control
Replace the cover by pushing it in the direction of the arrow.
Connecting the Aerial or Cable Television Network
To view television channels correctly, a signal must be received by
the set from one of the following sources:
◆ An outdoor aerial
◆ A cable television network
◆ A satellite network
Plug the aerial or cable network input cable to the 75Ω coaxial socket
on the rear of the television.
75Ω
or
Cable
Television
Network
Rear of TV
8
KS1A(03123A)ENG_UMG
12/29/03
6:52 PM
Page 9
Switching Your Television On and Off
ENG
The mains lead is attached to the rear of the television.
1
2
Plug the mains lead into an appropriate socket.
➢
The main voltage is indicated on the rear of the TV set and
the frequency is 50 or 60Hz.
Press the “
Result:
3
The Standby indicator lights up on the front panel.
Press the POWER (
television on.
Result:
4
” (ON/OFF) button on the front of the television.
) button on the remote control to switch the
The programme that you were watching last is reselected automatically.
To switch your television off, press the “
on the front of the television.
” (ON/OFF) button again
Placing Your Television in Standby mode
Your television can be placed in Standby mode, in order to reduce:
◆ Power consumption
◆ Wear of the cathode ray tube
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
The television is placed automatically in Standby mode when you
turn it on.
1
Press the POWER (
Result:
2
) button on the remote control.
The screen is turned off and the Standby indicator on
the front of the television lights up.
To switch the screen back on, simply press the POWER (
again on the remote control.
➣ You can also switch on by pressing the P
➣
or
) button
button.
Do not leave your television in standby mode for long
periods of time (when you are away on holiday, for example).
In this case, you should switch it off completely.
9
KS1A(03123A)ENG_UMG
12/29/03
6:52 PM
Page 10
Plug & Play Feature (depending on the model)
ENG
When the television is initially powered on, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
1
If the television is in Standby mode, press the POWER (
on the remote control.
Result:
2
Plug & Play
Engllish
Indonesia
Malaysia
3
Adjust
The message Plug & Play is displayed. It flickers for a
little while and then the Language menu is automatically
displayed.
Press the ▲ or ▼ button to select required language. Press the
MENU ( ) button to enter the language, and then the message
Ant. Input Check is displayed.
➣
Language
) button
If any language is not selected on the Language menu, the
Language menu will be displayed about 30 seconds later.
Make sure that the antenna is connected to the TV. And then press
the œ or √ button to store the channels (refer to Storing the
Channels Automatically on page 12).
Select
Result:
Ant. Input Check
Auto Store
Exit
P1
471 MHz
The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range.
4
When searching and storing is complete, the Time menu is
displayed.
5
Press the œ or √ button to move to the hour or minute. Set the
hour or minute by pressing the ▲ or ▼ button (refer to Setting
and Displaying the Current Time on page 24).
6
When you have finished, press the MENU (
48 %
) button.
Exit
Result:
The message ENJOY YOUR WATCHING is displayed, and
then the channel which has been stored will be
activated.
Time
Clock
Move
- - : - - am
Exit
7
If you want to reset this feature...
1
Press the MENU (
2
Press the ▲ or ▼ button to select the Function, and then
press the œ or √ button.
3
Select the Plug & Play by pressing the ▲ or ▼ button, and
then press the œ or √ button.
ENJOY YOUR WATCHING
Function
Language : English
Time
√
Plug & Play
√
Blue Screen
: Off
Child Lock
√
Select
Enter
10
Exit
Result:
) button.
The message Plug & Play is displayed.
KS1A(03123A)ENG_UMG
12/29/03
6:52 PM
Page 11
Choosing Your Language
ENG
When you start using your television for the first time, you must
select the language which will be used for displaying menus and
indications.
Picture
Mode
Adjust
Size
1
Press the MENU (
2
Press the ▲ or ▼ button to select the Function.
3
Press the œ or √ button to select the Language.
4
Select a particular language by pressing the œ or √ button
repeatedly.
5
When you have finished, press the EXIT (
MENU ( ) button repeatedly to return to
normal viewing.
) button.
Select
œ
√
Custom
√
: Normal
Enter
Exit
Function
) button or, press the
Language : English
Time
√
Plug & Play
√
Blue Screen
: Off
Child Lock
√
Select
Adjust
11
Exit
KS1A(03123A)ENG_UMG
12/29/03
6:52 PM
Page 12
Storing the Channels Automatically
ENG
You can scan the frequency ranges available on your television and
in your country and store all the channels found automatically.
Picture
Mode
Adjust
Size
Select
œ
√
Custom
√
: Normal
Enter
Exit
Channel
√
√
√
√
√
Auto Store
Manual Store
Add/Erase
Fine Tune
Sort
Select
Enter
The channels are stored in the order in which they appear in the
frequency bands. It is possible that the automatically allocated
numbers may not correspond to those by which you wish to
identify the channels. If this is the case, refer to “Sorting the Stored
Channels” on page 16.
1
Press the MENU (
2
Press the ▲ or ▼ button to select the Channel.
3
Press the œ or √ button to select the Auto Store.
4
Press the œ or √ button again.
Result: The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range. Finally, the search will end automatically.
Exit
5
P1
471 MHz
48 %
Exit
Channel
Sort
From
To
Store
Select
: P 1
: P-: ?
Adjust
) button.
➣
When searching and storing is complete, the Sort menu is
displayed.
To...
Then...
Sort the stored channels
into the desired numerical order
Go to Step 4 of the Sorting
the Stored Channels
procedure on page 16.
Exit the channel store function
without sorting the channels
Press the MENU ( )
button repeatedly until the
menus disappear.
If sound does not work regularly after storing channels, select
the sound system which best corresponds in Manual Store
menu (refer to the opposite page).
Exit
Selecting a Channel Numbered Ten or Over
When using the numeric buttons to select a channel stored at
programme position ten or higher, follow the instructions below.
1
Press the -/-- button.
Result:
2
The “--” symbol is displayed.
Enter the two-digit channel number.
Example: To select channel 42, press 4, followed by 2.
12
KS1A(03123A)ENG_UMG
12/29/03
6:52 PM
Page 13
Storing the Channels Manually
ENG
When storing channels manually, you can choose:
◆ Whether or not to store each of the channels found.
Channel
◆ The number by which you wish to identify each stored
channel.
1
Press the MENU (
2
Press the ▲ or ▼ button to select the Channel and press the œ or
√ button.
3
Press the ▲ or ▼ button to select the Manual Store and press the
œ or √ button.
Result:
4
) button.
The Manual Store menu is displayed with the Color
System selected.
Press the œ or √ button repeatedly until the color is of the best
quality.
Result:
Select
Enter
Manual Store
Color System
Sound System
Search
Prog.No.
Store
Channel
➞
➞
NTSC4.43 is a “trick” playback mode used by
special VCR’s to play PAL-recorded videos in
NTSC mode.
Color System
Sound System
Search
Prog.No.
Store
Select
Adjust
Manual Store
Color System
Sound System
Search
Prog.No.
Store
If sound does not work regularly after storing
channels, select the sound system which best
corresponds.
To start the search, select the Search and then press the œ or √
button.
The tuner scans the frequency range until the first
channel or the channel that you selected is received on
your screen.
7
To assign a programme number to the channel, select the
Prog.No.. Press the œ or √ button until you find the correct
number.
8
To store the channel and associated programme number, select
the Store and press the œ or √ button.
Result:
Exit
Channel
➞
➞
➣
Result:
: AUTO
: B/G
: -/+
: 18
: ?
The Sound System is changed (depending on the
model).
B/G - I - D/K - M
6
Exit
Manual Store
Press the ▲ or ▼ button to select the Sound System and press the
œ or √ button repeatedly until the sound is of the best quality.
Result:
: AUTO
: B/G
: -/+
: 18
: ?
Adjust
AUTO - PAL - SECAM - NTSC4.43 - NTSC3.58
5
Exit
Channel
Select
The Color System is changed (depending on the
model).
➣
√
√
√
√
√
Auto Store
Manual Store
Add/Erase
Fine Tune
Sort
Select
: AUTO
: B/G
: -/+
: 18
: ?
Adjust
Exit
Channel
Manual Store
Color System
Sound System
Search
Prog.No.
Store
Select
: AUTO
: B/G
: -/+
: 18
: ?
Adjust
Exit
OK is displayed.
9
Repeat Steps 6 to 8 for each channel to be stored.
10
When you have finished manual storage, press the EXIT (
button or, press the MENU ( ) button repeatedly to return to
normal viewing
Channel
Manual Store
)
Color System
Sound System
Search
Prog.No.
Store
Select
Adjust
13
: AUTO
: B/G
: -/+
: 18
: OK
Exit
KS1A(03123A)ENG_UMG
12/29/03
6:52 PM
Page 14
Skipping Unwanted Channels
ENG
You can exclude the channels of your choice from the channel scan
operation. When you scan through the stored channels, those you
have chosen to skip are not displayed.
Channel
√
√
√
√
√
Auto Store
Manual Store
Add/Erase
Fine Tune
Sort
Select
Enter
Exit
All channels that you do not specifically choose to skip are
displayed during scanning.
1
Press the MENU (
2
Press the ▲ or ▼ button to select the Channel and press the œ or
√ button.
3
Press the ▲ or ▼ button to select the Add/Erase and press the œ
or √ button.
Channel
Add/Erase
P1
P2
P3
P4
Select
: Added
: Added
: Added
: Added
Result:
Adjust
Exit
Channel
Add/Erase
P1
P2
P3
P4
Select
: Erased
: Added
: Added
: Added
Adjust
14
Exit
) button.
The Add/Erase menu is displayed.
4
Press the ▲ or ▼ button to select the required channel.
5
To add or erase the desired channel by pressing the œ or √ button.
6
When you have finished adding and erasing channels, press the
EXIT ( ) button or, press the MENU ( ) button repeatedly to
return to normal viewing
KS1A(03123A)ENG_UMG
12/29/03
6:52 PM
Page 15
Fine tuning Channel Reception
ENG
If the reception is clear, you do not have to fine-tune the channel,
as this is done automatically during the search and store operation.
If however the signal is weak or distorted, you may have to finetune the channel manually.
1
Press the MENU (
2
Press the ▲ or ▼ button to select the Channel and press the œ or
√ button.
3
Press the ▲ or ▼ button to select the Fine Tune and press the œ
or √ button.
Result:
4
) button.
The Fine Tune menu is displayed with the Tune
selected.
To...
Press the...
obtain a sharp and
clear picture and
good sound quality
◆ œ or √ button.
Result: The horizontal bar’s
cursor moves to the left
or right.
memorise adjusted
picture or sound
◆ ▲ or ▼ button to select the Store.
◆ œ or √ button.
Result: OK is displayed.
erase adjusted
picture or sound
◆ ▲ or ▼ button to select the Erase.
◆ œ or √ button.
Result: OK is displayed.
Channel
√
√
√
√
√
Auto Store
Manual Store
Add/Erase
Fine Tune
Sort
Select
Enter
Exit
Channel
Fine Tune
Tune
Store
Erase
Select
: -/+
: ?
: ?
Adjust
Exit
Fine Tune
Channel
Fine Tune
5
When you have finished, press the EXIT (
MENU ( ) button repeatedly to return to
normal viewing.
) button or, press the
Tune
Store
Erase
Select
: -/+
: OK
: ?
Adjust
Exit
Channel
Fine Tune
Tune
Store
Erase
Select
: -/+
: ?
: OK
Adjust
15
Exit
KS1A(03123A)ENG_UMG
12/29/03
6:52 PM
Page 16
Sorting the Stored Channels
ENG
You can exchange the numbers of two channels, in order to:
◆ Modify the numeric order in which the channels have
been automatically stored.
Channel
√
√
√
√
√
Auto Store
Manual Store
Add/Erase
Fine Tune
Sort
Select
Enter
Exit
◆ Give easily remembered numbers to the channels that
you watch most often.
1
Press the MENU (
2
Press the ▲ or ▼ button to select the Channel and press the œ or
√ button.
3
Press the ▲ or ▼ button to select the Sort and press the œ or √
button.
Channel
Sort
From
To
Store
: P 1
: P-: ?
Result:
4
Select
Adjust
Exit
The Sort menu is displayed with the From selected.
Press the œ or √ button until the channel number that you wish to
change is displayed.
Result:
Channel
) button.
The selected channel’s picture is displayed.
5
Press the ▲ or ▼ button to select the To.
6
Press the œ or √ button until the new number by which you wish to
identify the channel is displayed.
Sort
From
To
Store
: P 1
: P 3
: ?
Result:
Select
Adjust
Exit
Example: If you select P 1 for the From and P 3 for the To:
◆ Channel 1 becomes channel 3.
◆ Channel 3 becomes channel 1.
Channel
7
Sort
From
To
Store
Select
: P 3
: P 1
: OK
Adjust
To...
Press the...
Confirm the exchange
of channel numbers
◆ ▲ or ▼ button to select the Store.
◆ œ or √ button.
Result: OK is displayed.
➣ You can exchange other
Exit
channel numbers by selecting
From and returning to step 4.
8
16
The selected channel is exchanged with the one
previously stored to the chosen number.
When you have finished sorting channels, press the EXIT (
button or, press the MENU ( ) button repeatedly to return to
normal viewing
)
KS1A(03123A)ENG_UMG
12/29/03
6:52 PM
Page 17
Changing the Picture Standard
ENG
You can select the type of picture which best corresponds to your
viewing requirements. The following picture effects are available in
the order given:
Picture
Mode
Adjust
Size
◆ Custom, Standard, Sports, Natural, Mild.
1
Press the MENU (
Result:
2
The Picture menu is displayed.
Select
Adjust
Exit
The Mode menu is selected.
3
Select to satisfy your preference by pressing the œ or √ button.
4
When you have been finished, press the EXIT (
press the MENU ( ) button repeatedly to return to
normal viewing.
➣
√
Custom
√
: Normal
) button.
Press the œ or √ button.
Result:
œ
) button or,
You can select the required picture effect by simply
pressing the “P.MODE” (Picture Mode) button on the
remote control.
Selecting the Picture Format (depending on the model)
You can select the picture format which best corresponds to your
viewing requirements. The following picture formats are available
in the order given:
Picture
Mode
Adjust
Size
◆ Normal
◆ Zoom
œ
√
Custom
√
: Normal
◆ 16:9 (Option)
1
Press the MENU (
Result:
) button.
Adjust
The Picture menu is displayed.
2
Press the œ or √ button.
3
Press the ▲ or ▼ button to select the Size.
4
Select to satisfy your preference by pressing the œ or √ button.
5
When you have been finished, press the EXIT (
) button or,
press the MENU (
) button repeatedly to return to normal
viewing.
➣
Select
You can select the required picture format by simply
pressing the “P.SIZE ( )” (Picture size) button on the
remote control.
17
Exit
KS1A(03123A)ENG_UMG
12/29/03
6:52 PM
Page 18
Adjusting the Picture Settings
ENG
Your television has several settings which allow you to control picture
quality:
Picture
Mode
Adjust
Size
œ
◆ Color Tone, Contrast, Brightness, Sharpness, Color, Tint
(NTSC only)
√
Custom
√
: Normal
1
Press the MENU (
Result:
Select
Enter
Exit
) button.
The Picture menu is displayed.
2
Press the œ or √ button to select the custom mode.
3
Press the ▲ or ▼ button to select the Adjust, and then press the œ
or √ button.
Picture
Result:
Adjust
Color Tone : Normal
Contrast
100
Brightness
50
Sharpness
50
Color
50
Select
Adjust
4
Adjust
Color Tone : Normal
Contrast
100
Brightness
50
Sharpness
50
Color
50
Adjust
5
100
➣
18
Press the...
◆ Color Tone
◆ œ or √ button.
Result: You select the required option
(Normal, Warm1/2, Cool1/2).
◆
◆
◆
◆
◆
◆ œ or √ button.
Result: The horizontal bar is displayed.
Contrast
Brightness
Sharpness
Color
Tint (NTSC only)
When you are satisfied with the settings, press the EXIT ( ) button
or, press the MENU (
) button repeatedly to return to normal
viewing.
Exit
➣
Contrast
To adjust the...
Exit
Picture
Select
When select the Mode to Custom, the Adjust menu is
displayed.
The television has an “automatic degaussing” system that is
activated if magnetic interference is present. To degauss the
television screen, switch power off by pressing the “ ”
(ON/OFF) button on the front panel (refer to “Automatic
Degaussing to Remove Color Patches” on page 34).
If you make any changes to the Adjust settings, the picture
standard is automatically switched to Custom.
KS1A(03123A)ENG_UMG
12/29/03
6:52 PM
Page 19
Changing the Sound Standard (depending on the model)
ENG
You can select the type of special sound effect to be used when
watching a given broadcast. The following sound effects are
available in the order given:
œ
Mode
Custom
Adjust
√
Auto Volume
: Off
Melody
: Off
Pseudo Stereo : Off
Turbo Sound
: Off
◆ Custom, Standard, Music, Movie, Speech.
1
Press the MENU (
2
Press the ▲ or ▼ button to select the Sound and press the œ or √
button.
Result:
) button.
Select
Adjust
The Mode menu is selected.
3
Select to satisfy your preference by pressing the œ or √ button.
4
When you have been finished, press the EXIT (
press the MENU ( ) button repeatedly to return to
normal viewing.
➣
Sound
) button or,
You can select the required sound effect by simply pressing
the “S.MODE” (Sound Mode) button on the remote
control.
19
√
Exit
KS1A(03123A)ENG_UMG
12/29/03
6:52 PM
Page 20
Adjusting the Sound Settings (depending on the model)
ENG
The sound settings can be adjusted to suit your personal preferences.
Sound
œ
Mode
Custom
Adjust
√
Auto Volume
: Off
Melody
: Off
Pseudo Stereo : Off
Turbo Sound
: Off
Select
Enter
√
1
Press the MENU (
2
Press the ▲ or ▼ button to select the Sound and press the œ or √
button to selet the custom mode.
3
Press the ▲ or ▼ button to select the Adjust and press the œ or √
button.
Exit
Result:
Sound
Bass
Treble
Balance
L 50
50
50
R 50
5
Press the œ or √ button.
Result:
Select
Adjust
Balance
Exit
L 49
When select the Mode to Custom, the Adjust menu is
displayed.
Select the required option by pressing the ▲ or ▼ button and
adjust to satisfy your preference by pressing the œ or √ button.
4
Adjust
) button.
6
The horizontal bar is displayed.
When you are satisfied with the settings, press the EXIT (
or, press the MENU ( ) button repeatedly to return to
normal viewing.
) button
R 51
➢
You can display the sound adjust menu directly by pressing
the “S.MENU” (Sound menu) button on the remote control.
Adjusting the Volume (depending on the model)
You can adjust the volume by pressing the
remote control.
or
button on the
◆ Press the
button to increase the volume (cursor moves to the right)
◆ Press the
button to decrease the volume (cursor moves to the left)
➣
The volume setting is retained:
◆ When you switch the television to standby mode
◆ When you switch the television off using the “
(ON/OFF) button on the front panel
◆ If there is a power failure.
20
”
KS1A(03123A)ENG_UMG
12/29/03
6:52 PM
Page 21
Extra Sound Settings (depending on the model)
ENG
The following sound settings can be adjusted to suit your personal
preferences.
Sound
◆ Auto Volume
Each broadcasting station has its own signal conditions,
and so it is not easy for you to adjust the volume every
time the channel is changed. Auto Volume lets you
automatically adjust the volume of the desired channel by
lowering the sound output when the modulation signal is
high or by raising the sound output when the modulation
signal is low.
Adjust
Exit
œ
Mode
Custom
Adjust
√
Auto Volume
: Off
Melody
: On
Pseudo Stereo : Off
Turbo Sound
: Off
You can hear clear melody sound when the TV is
powered ON or OFF.
◆ Pseudo Stereo
Pseudo Stereo converts a monaural sound signal into
two identical left and right channels.
Once the Pseudo Stereo is set to On or Off, the setting
applies to the sound effects such as Standard, Music,
Movie and Speech.
Select
Adjust
Exit
œ
Mode
Custom
Adjust
√
Auto Volume
: Off
Melody
: Off
Pseudo Stereo : On
Turbo Sound
: Off
You can enjoy more magnificent and dynamic sound
when watching music, movie or other channel. Turbo
Sound suitably emphasizes both higher and lower bands
of sound (and includes other effects).
Select
1
Press the MENU (
2
Press the ▲ or ▼ button to select the Sound and press the œ or √
button.
3
To...
Press the...
Change an option
▲ or ▼ button.
Adjust
) button.
Select the required option (On/Off)
√
Sound
◆ Turbo Sound
➢
Select
√
Sound
◆ Melody
4
œ
Mode
Custom
Adjust
√
Auto Volume
: On
Melody
: Off
Pseudo Stereo : Off
Turbo Sound
: Off
√
Exit
Sound
œ
Mode
Custom
Adjust
√
Auto Volume
: Off
Melody
: Off
Pseudo Stereo : Off
Turbo Sound
: On
Select
Adjust
œ or √ button.
When you are satisfied with the settings, press the EXIT (
button or, press the MENU ( ) button repeatedly to return to
normal viewing.
)
You can select the turbo sound by simply pressing the
“TURBO” button on the remote control.
21
√
Exit
KS1A(03123A)ENG_UMG
12/29/03
6:52 PM
Page 22
Selecting the Sound Mode (depending on the model)
ENG
The “DUAL I-II” button displays/controls the processing and
output of the audio signal. When power is switched ON, the mode
is automatically preset to either “Dual-I” or “STEREO”, depending
on the current transmission.
On-screen indication
Regular broadcast
(Standard audio)
MONO (Normal use)
Regular +
NICAM Mono
MONO
NICAM
NICAM Stereo
STEREO
NICAM
↔
Regular broadcast
(Standard audio)
A2
Stereo
Bilingual or Dual-I/II
Stereo
➣
MONO
(Normal)
MONO
(Normal)
Dual-I → Dual-II → MONO
NICAM NICAM (Normal)
→
NICAM Dual-I/II
↔
→
NICAM
Stereo
Type of broadcast
MONO (Normal use)
Dual-I
STEREO
↔
Dual-II
↔
MONO
(Forced Mono)
◆ If the receiving conditions deteriorate, listening will be
easier if the mode is set to the MONO position using the
DUAL I-II button.
◆ If the stereo signal is weak (or if intermittent Stereo-Mono)
and automatic switching occurs, then switch to the MONO
mode.
◆ When receiving mono sound in the AV mode, connect to
the “L” input jack on the panels. If the mono sound
comes out only from the left speaker, then press the
DUAL I-II button.
22
KS1A(03123A)ENG_UMG
12/29/03
6:52 PM
Page 23
Switching the Sound Off Temporarily
ENG
You can switch the sound off temporarily, for example you may
wish to answer the telephone.
1
Press the MUTE (
Result:
2
) button.
The sound is switched off and “
” is displayed.
When you wish to turn the sound back on at the same volume as
before, press the MUTE ( ) button again (or either of the volume
buttons).
Setting the Sleep Timer
You can select a time period of between 30 and 180 minutes after
which the television automatically switches to Standby mode by
pressing the “SLEEP ( )” button.
1
Press the SLEEP (
) button on the remote control.
Result:
2
If the sleep timer is...
The screen displays...
Already set
Time remaining before the television
will be placed in standby mode.
Not yet set
Word Off.
Press the SLEEP ( ) button repeatedly and cycle through the
preset time intervals (30, 60, 90, 120, 150, 180).
Result:
3
The television automatically switches to standby mode
when the timer reaches 0.
To cancel the sleep timer function, press the SLEEP (
repeatedly and select Off.
) button
23
KS1A(03123A)ENG_UMG
12/29/03
6:52 PM
Page 24
Setting and Displaying the Current Time (depending on the model)
ENG
Function
Language : English
Time
√
Plug & Play
√
Blue Screen
: Off
Child Lock
√
Select
Enter
Exit
You can set the television’s clock so that the current time is displayed
when you press the “INFO ( )” button.
You must also set the time if you wish to use the automatic On/Off
timers.
➣
1
Press the MENU (
2
Press the ▲ or ▼ button to select the Function and press the œ or
√ button.
3
Press the ▲ or ▼ button to select the Time, and press the œ or √
button.
Function
Time
Clock
Timer
12 : 00 am
Off
Result:
4
Adjust
Move
Exit
) button.
The Time menu is displayed with the Clock selected.
To...
Press the...
Move to the hour or minute
œ or √ button.
Set the hour or minute
▲ or ▼ button.
5
When you have finished, press the EXIT ( ) button or, press the
MENU ( ) button repeatedly to return to normal viewing.
6
To display the...
Press the “INFO (
Channel information
Once.
Current time
Twice.
7
24
The clock setting will be re-activated when pressing the
“ ” (ON/OFF) button on the front panel.
To remove the display, press the INFO (
)” button...
) button again.
KS1A(03123A)ENG_UMG
12/29/03
6:52 PM
Page 25
Switching the Television On and Off Automatically (depending on the model)
ENG
You can set the On/Off timers so that the television will:
◆ Switch on automatically and tune to the channel of your
choice at the time you select
◆ Switch off automatically at the time you select
➣
The first step is to set the television’s clock (refer to
Setting and Displaying the Current Time on the
previous page). If you have not yet set the clock, the
message Set the clock first is displayed.
1
Press the MENU (
2
Press the ▲ or ▼ button to select the Function and press the œ or
√ button.
Function
Language : English
Time
√
Plug & Play
√
Blue Screen
: Off
Child Lock
√
Select
Enter
Exit
) button.
Function
3
Press the ▲ or ▼ button to select the Time, and press the œ or √
button.
Result:
The Time menu is displayed.
Time
Clock
Timer
Select
4
Press the ▲ or ▼ button to select the Timer.
5
Press the œ or √ button to set the mode to On.
11 : 35 am
Off
Adjust
Exit
Function
Time
Result:
The On Time and Off Time options are displayed.
6
Press the ▲ or ▼ button to select the On Time.
7
Set the time at which you wish the television to be switched On.
Clock
Timer
On time
Off time
Select
To...
Press the...
Move to the hour or minute
œ or √ button.
Adjust the hour or minute
▲ or ▼ button.
8
In the same way, set the time at which you wish the television to be
switched Off.
9
When you have finished setting the On/Off time, press the EXIT
( ) button or, press the MENU ( ) button repeatedly to return to
normal viewing.
➣
11 : 35 am
On
- - : - - am
- - : - - am
Adjust
Function
Time
Clock
Timer
On time
Off time
Select
11 : 35 am
On
07 : 00 am
- - : - - am
Adjust
Absent Power Off
When you set the timer “On”, your television will
eventually be turned off, if you do not operate any controls
during the 3 hours after the TV is turned on by timer.
This function is available in only the timer “On” mode and
will prevent a leakage accident or overheating, caused by
your TV left on for a long time due to the timer “On”
(when you are away on holiday, for example).
Exit
Exit
Function
Time
Clock
Timer
On time
Off time
Select
11 : 35 am
On
07 : 00 am
11 : 00 pm
Adjust
25
Exit
KS1A(03123A)ENG_UMG
12/29/03
6:52 PM
Page 26
Activating the Child Lock
ENG
You can restrict viewing by locking the channels of your choice.
Example: You can prevent your children from watching
unsuitable programmes.
Function
Language : English
Time
√
Plug & Play
√
Blue Screen
: Off
Child Lock
√
Select
Enter
1
Press the MENU (
2
Press the ▲ or ▼ button to select the Function and press the œ or
√ button.
3
Press the ▲ or ▼ button to select the Child Lock and press the œ
or √ button.
Exit
Function
Result:
) button.
The Child Lock menu is displayed.
Child Lock
Child Lock
: Off
4
Set to On by pressing the œ or √ button.
➣
Select
Adjust
If you want to unlock a channel, set to Off.
5
Press the ▲ or ▼ button to select the Prog.No.. Select the number
of the channel to be locked by pressing the œ or √ button.
6
Press the ▲ or ▼ button to select the Lock and press the œ or √
button.
Exit
Function
Result:
Locked is displayed.
Child Lock
Child Lock
Prog.No.
Lock
Select
: On
: 1
: ?
Adjust
Exit
Function
Child Lock
Child Lock
Prog.No.
Lock
Select
: On
: 1
: Locked
Adjust
Exit
P1
Child Lock
: Locked
26
7
When you have finished, press the EXIT ( ) button or, press the
MENU ( ) button repeatedly to return to normal viewing.
➣
If any channel is locked, you can not enter the Channel
menu by using the control buttons on the television, and
the message “Not available” is displayed. You can access
by using the remote control only.
KS1A(03123A)ENG_UMG
12/29/03
6:52 PM
Page 27
Setting the Blue Screen Mode
ENG
If no signal is being received or the signal is very weak, a blue
screen automatically replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the
“Blue Screen” mode to “Off”.
1
Press the MENU (
2
Press the ▲ or ▼ button to select the Function and press the œ or
√ button.
3
Press the ▲ or ▼ button to select the Blue Screen.
4
Press the œ or √ button to select the required option (On/Off).
5
When you are satisfied with the settings, press the EXIT (
)
button or, press the MENU (
) button repeatedly to return to
normal viewing.
) button.
Function
Language : English
Time
√
Plug & Play
√
Blue Screen
: Off
Child Lock
√
Select
Adjust
27
Exit
KS1A(03123A)ENG_UMG
12/29/03
6:52 PM
Page 28
Enjoying Games (depending on the model)
ENG
You can enjoy the game (Chicken Farm), programmed in this TV.
1
Press the GAME button to enter the Game mode.
Result:
The READY window will be displayed.
2
Press the œ or √ button to run the game.
3
Move the farmer to catch eggs by using the œ or √ button. Every
time the scores go up, the speed of game becomes faster bit by bit.
4
Every time you catch fifty eggs (i.e., 50, 100, 150 ...), if any broken
egg exists, one egg can be restored. When five eggs are lost, the
game will be over and simultaneously the final score window will be
displayed.
5
If you want to stop during the game, press the MENU (
Then, the final score window will be displayed.
6
If you want to re-start the game, press the MENU ( ), œ or √
button. Then, the final score window will be switched to the READY
window.
7
To exit the Game mode, press the GAME button.
READY
SCORE 0
SCORE 16
28
) button.
KS1A(03123A)ENG_UMG
12/29/03
6:52 PM
Page 29
Teletext Decoder (depending on the model)
ENG
Most television channels carry “teletext,” pages of written
information that provide information such as:
◆ Television programme times
◆ News bulletins
◆ Weather forecasts
◆ Sports results
◆ Subtitles for the hard of hearing
The teletext pages are organized according to six categories:
Part
Contents
A
Selected page number.
B
Broadcasting station identity.
C
Current page number or search status
D
Date and time.
E
Text.
F
Status information.
Displaying Teletext Information (depending on the model)
You can display teletext information at any time, but signal
reception must be good. Otherwise:
◆ Information may be missing
◆ Some pages may not be displayed
To activate the teletext mode and display the contents page:
1
Using the
( ) or
the teletext service.
(
2
Press the TTX/MIX (
) button to activate the teletext mode.
Result:
) button, select the channel providing
The contents page (page 100) is displayed. It can be
redisplayed at any time by pressing the
(index)
button.
3
To display the actual broadcast simultaneously with the teletext
page, press the TTX/MIX (
) button.
4
To return to normal viewing press the TV (
) button.
29
KS1A(03123A)ENG_UMG
12/29/03
6:52 PM
Page 30
Selecting a Specific Teletext Page (depending on the model)
ENG
Press the number buttons on the remote control to enter the page
number directly:
1
Enter the three-digit page number listed in the contents by pressing
the corresponding numeric buttons.
Result:
30
The current page counter is incremented and the page is
then displayed.
2
If the selected page is linked with several secondary pages, the
secondary pages are displayed in sequence. To freeze the display
on a given page, press the
(hold) button. Press the
(hold)
button again to resume.
3
Using the various display options:
To display...
Press the...
◆ Both teletext information and
the normal broadcast
TTX/MIX (
)
◆ Hidden text
(answers to quiz games, for example)
(reveal)
◆ The normal screen
(reveal) again
◆ A secondary page, by entering its
4-digit number
(sub-page)
◆ The next page
(page up)
◆ The previous page
(page down)
◆ Double-size letters in the:
• Upper half of the screen
• Lower half of the screen
(size)
◆ Once
◆ Twice
◆ Normal screen
◆ Three times
KS1A(03123A)ENG_UMG
12/29/03
6:52 PM
Page 31
Using FLOF to Select a Teletext Page (depending on the model)
ENG
The various topics included in the teletext pages are color-coded,
and can be selected by pressing the colored buttons on the remote
control.
1
Display the teletext contents page by pressing the TTX/MIX (
button.
2
Press the colored button corresponding to the topic that you wish to
select (The available topics are listed on the status information
line).
Result:
3
4
)
The page is displayed with additional color-coded
information that can be selected in the same way.
To display the:
Press the:
Previous page
Red button.
Next page
Green button.
When you have finished, press the TV (
normal broadcast.
) button to return to the
Storing Teletext Pages (depending on the model)
Up to four teletext pages can be stored.
1
Select the LIST mode.
Result:
Four 3-digit numbers are displayed in different colors at
the bottom of the screen.
2
Press the colored button corresponding to the page that will be
replaced.
3
Enter the new page number using the numeric buttons.
4
Repeat steps 2 and 3 for each page to be stored, using a different
colored button each time.
5
Press the
(store) button until the corresponding blocks are
displayed in white.
➣
The
(List) button is used to switch between:
◆ LIST mode
◆ FLOF mode
31
KS1A(03123A)ENG_UMG
12/29/03
6:52 PM
Page 32
Viewing Pictures From External Sources
ENG
Once you have connected up your various audio and video systems,
you can view the different sources by selecting the appropriate input.
1
Check that all the necessary connections have been made.
2
Switch the television on and if necessary, press the VIDEO (
button one or more times until the required input is displayed.
➢
➢
32
)
Depending on the source selected, the pictures may appear
automatically.
To watch television programmes again, press the TV ( )
button and select the number of the channel required.
KS1A(03123A)ENG_UMG
12/29/03
6:52 PM
Page 33
Connecting to the Audio/Video Input/Outputs
➢
The actual configuration on your TV may be different, depending on
your model.
Rear of TV
AV cable
(depending on the model)
(depending on the model)
ENG
VCR
VIDEO
OUTPUT
AUDIO
INPUT
Decoder/
Video game device
Video disc player
VIDEO AUDIO
MONITOR
-OUT
Camcorder
INPUT
Satellite receiver
(MONO)
VIDEO L-AUDIO-R
MONITOR
-OUT
INPUT
➢
The Audio/Video connector on the rear of the television is
used for equipment with an RGB output.
Front (or Side) of TV
AV cable
(depending on the model)
(depending on the model)
Camcorder
Video disc player
Decoder/
Video game device
➢
◆ The Audio/Video connector on the front (or side) of the television is
used for equipment, such as camcorders, video disc players and
certain video games.
◆ When both the front (or side) and rear connectors are connected to external equipment,
the front (or side) AV has the priority.
33
KS1A(03123A)ENG_UMG
12/29/03
6:52 PM
Page 34
Automatic Degaussing to Remove Color Patches
ENG
A degaussing coil is mounted around the picture tube, so you do not normally need to degauss the
television manually.
If you move the television to a different position and color patches appear on the screen, you must:
◆ Switch the television off by pressing the “
” (ON/OFF) button on the front panel
◆ Unplug the television from the wall socket
◆ Leave the television power-off (stand-by) for about 30 minutes so that the automatic degauss
function can be activated, and then press the POWER (
) button on the remote control.
☛
If your television will be left unattended, press the “
television off.
” (ON/OFF) button to turn your
Troubleshooting: Before Contacting Service Personnel
Before contacting Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of the
television and contact your local dealer.
No sound or picture
◆
◆
◆
◆
Normal picture but no sound
◆ Check the volume.
◆ Check whether the MUTE (
remote control.
Check that the mains lead has been connected to a wall socket.
Check that you have pressed the “ ” (ON/OFF) button.
Check the picture contrast and brightness settings.
Check the volume.
) button has been pressed on the
No picture or black and white picture
◆ Adjust the colour settings.
◆ Check that the broadcast system selected is correct.
Sound and picture interference
◆ Try to identify the electrical appliance that is affecting the television
and move it further away.
◆ Plug your television into a different mains socket.
Blurred or snowy picture,
distorted sound
◆ Check the direction, location and connections of your aerial.
This interference is often due to the use of an indoor aerial.
Remote control malfunctions
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control (transmission window).
◆ Check the battery terminals.
34
KS1A(03123A)ENG_UMG
12/29/03
6:52 PM
Page 35
Memo
ENG
35
KS1A(03123A)ENG_UMG
12/29/03
6:52 PM
Page 36
- AFTER SALES SERVICE
- Do not hesitate to contact your retailer or service agent
if a change in the performance of your product indicates
that a faulty condition may be present.
ELECTRONICS
AA68-03123A-00
Download PDF

advertising