Samsung | SL-C4010ND | Samsung 컬러 레이저프린터 40 ppm SL-C4010ND 사용자 매뉴얼

User Guide for Mac/Linux/UNIX User
Thank
you for purchasing a Samsung product.
Copyright
© 2017 Samsung Electronics Co., Ltd. All rights reserved.
This user guide is provided for information purposes only. All information included herein is subject to change without notice.
Samsung Electronics is not responsible for any direct or indirect damages, arising from or related to use of this user’s guide.
•
Samsung and the Samsung logo are trademarks of Samsung Electronics Co., Ltd.
•
iPad, iPhone, iPod touch, Mac and Mac OS are trademarks of Apple Inc., registered in the U.S and other countries.
•
All other brand or product names are trademarks of their respective companies or organizations.
REV. 1.00
Copyright
2
1. Introduction
About this user guide
5
System requirements
6
2. Software Installation
Installing the driver locally
9
Installing driver over the network
11
Reinstalling driver
14
3. Printing/Scanning/Faxing
Printing
16
Scanning (only user with scan machine)
22
Faxing (only user with scan machine)
23
4. Troubleshooting
Common Mac problems
25
Common Linux problems
26
3
1. Introduction
This user guide provides information for your basic understanding of the machine as well as detailed steps to explain
Mac, Linux, and UNIX OS usage.
• About this user guide
5
• System requirements
6
About this user guide
The procedures in this user guide are mainly based on Mac, Linux, and UNIX.
•
If you are a Mac, Linux or UNIX operating systems user, refer to the User Guide from the Samsung website, http://www.samsung.com > find your product >
Support or Downloads or http://www.samsung.com/printersetup.
•
If you have Internet access, you can get help, support application, machine drivers, manuals, and order information from the Samsung website,
www.samsung.com > find your product > Support or Downloads.
1
Conventions
Some terms in this guide are used interchangeably, as below:
•
Document is synonymous with original.
•
Paper is synonymous with media, or print media.
•
Machine refers to printer or MFP.
2
General icons
Icon
Text
Warning
Caution
Note
Description
Used to alert users to the possibility of personal injury.
Gives users information to protect the machine from possible mechanical damage or malfunction.
Provides additional information or detailed specification of the machine function and feature.
1. Introduction
5
System requirements
• Printer software are occasionally updated due to release of new operating system and etc. If needed, download the latest version from the Samsung website.
• For information about future operating system releases and support, visit the Samsung online support website.
• Supported operating system may differ according to your model.
3
Mac
Requirements (Recommended)
Operating system
CPU
RAM
Free HDD space
Mac OS X 10.6
• Intel® processors
1 GB (2 GB)
1 GB
Mac OS X 10.7-10.11
• Intel® processors
2 GB
4 GB
1. Introduction
6
System requirements
4
Linux
Items
Requirements
Red Hat Enterprise Linux 5, 6, 7
Fedora 16, 17, 18, 19, 20, 21, 22, 23, 24
OpenSUSE 12.1, 12.2, 12.3, 13.1, 13.2, 42.1
Operating system
Ubuntu 11.10, 12.04, 12.10, 13.04, 13.10, 14.04, 14.10, 15.04, 15.10, 16.04
SUSE Linux Enterprise Desktop 11, 12
Debian 7, 8
CPU
RAM
Free HDD space
Mint 13, 14, 15, 16, 17, 18
Pentium IV 2.4 GHz (Intel Core™ 2)
512 MB (1 GB)
1 GB (2 GB)
5
UNIX
Items
Requirements
Sun Solaris 9, 10, 11 (x86, SPARC)
Operating system
HP-UX 11.0, 11i v1, 11i v2, 11i v3 (PA-RISC, Itanium)
IBM AIX 5.1, 5.2, 5.3, 5.4, 6.1, 7.1 (PowerPC)
Free HDD space
Up to 100 MB
1. Introduction
7
2. Software Installation
This chapter provides instructions for installing essential and helpful software for use in an environment where the
machine is connected via a cable.
• Installing the driver locally
9
• Installing driver over the network
11
• Reinstalling driver
14
Supported operating system may differ according to your model.
Installing the driver locally
1
2
Mac
Linux
1
Make sure that the machine is connected to your computer and
powered on.
2
Download the software from the Samsung website then unpack and
install it (http://www.samsung.com > find your product > Support or
Downloads).
3
4
5
6
You need to download Linux software packages from the Samsung website to
install the printer software (http://www.samsung.com > find your product >
Support or Downloads).
Installing the Unified Linux Driver
Turn on the machine.
You must log in as a super user (root) to install the machine software. If you
are not a super user, ask your system administrator.
Double-click the Install Software icon.
Read the license agreement and check installation agreement button.
Click Next and then follow the instructions in the installation window.
1
Make sure that the machine is connected to your computer and
powered on.
To install the fax driver:
2
3
Copy Unified Linux Driver package to your system.
4
5
6
Extract the package.
1 Open the Applications folder > Samsung > Fax Queue Creator.
2 Your machine appears on the Printer List.
3 Select machine to use and click Create button.
Open Terminal program and go to the folder that you copied the
package to.
Move to uld folder.
Execute "./install.sh" command (If you're not logged in as root, execute
the command with "sudo" as "sudo ./install.sh").
2. Software Installation
9
Installing the driver locally
7
8
9
10
11
Proceed with installation.
When installation finished, launch printing utility (Go to System >
Administration > Printing or execute "system-config-printer"
command in Terminal program).
Click Add button.
Select your printer.
Click Forward button and add it to your system.
2. Software Installation
10
Installing driver over the network
You must install the printer driver software for printing. The software includes
drivers, applications, and other support programs.
Make sure that the network setup for your machine is completed. All
applications should be closed on your computer before beginning installation.
3
Mac
1
Make sure that the machine is connected to your computer and
powered on.
2
Download the software from the Samsung website then unpack and
install it (http://www.samsung.com > find your product > Support or
Downloads).
3
4
5
6
7
8
9
Turn on the machine.
Double-click the Install Software icon.
Read the license agreement and check installation agreement button.
Click Next.
Select Network on the Printer Connection Type.
4
Linux
You need to download Linux software packages from the Samsung website to
install the printer software (http://www.samsung.com > find your product >
Support or Downloads).
1
Make sure that the machine is connected to your network and powered
on. Also, your machine’s IP address should have been set.
2
3
Copy Unified Linux Driver package to your system.
4
5
6
Extract the package.
Move to uld folder.
Execute ” ./install.sh“ command (If you are not logged in as root,
execute the command with “sudo” as “sudo ./install.sh”).
7
8
Proceed with installation.
9
Click Add button.
Click Next.
Follow the instructions in the installation window.
Open Terminal program and go to the folder that you copied the
package to.
When installation finished, launch Printing utility (Go to System >
Administration > Printing or execute “system-config-printer“
command in Terminal program).
2. Software Installation
11
Installing driver over the network
10
11
Select AppSocket/HP JetDirect and enter your machine’s IP address.
1
From the Samsung website, download and unpack the UNIX Printer
Driver package to your computer.
2
Acquire root privileges.
Click Forward button and add it to your system.
“su -”
5
UNIX
3
• Make sure your machine supports the UNIX operating system before
installing the UNIX printer driver (see "System requirements" on page 6).
• The commands are marked with “”, when typing the commands, do not
type “”.
• Some features and optional goods may not be available depending on
model or country.
Copy the appropriate driver archive to the target UNIX computer.
See administration guide of your UNIX OS for details.
4
Unpack the UNIX printer driver package.
For example, on IBM AIX, use the following commands.
“gzip -d < enter the package name | tar xf -”
To use the UNIX printer driver, you have to install the UNIX printer driver
package first, then setup the printer. You can download the UNIX printer driver
package from the Samsung website (http://www.samsung.com > find your
product > Support or Downloads).
5
6
Go to the unpacked directory.
Run the install script.
“./install –i”
install is the installer script file which is used to install or uninstall the
UNIX Printer Driver package.
Installing the UNIX printer driver package
Use “chmod 755 install” command to give the permission to the
installer script.
The installation procedure is common for all variants of UNIX OS mentioned.
7
Execute the “. /install –c” command to verify installation results.
2. Software Installation
12
Installing driver over the network
8
Run “installprinter” from the command line. This will bring up the Add
Printer Wizard window. Setup the printer in this window referring to
the following procedures.
On some UNIX OS, for example on Solaris 10, just added printers may not be
enabled and/or may not accept jobs. In this case run the following two
commands on the root terminal:
“accept <printer_name>”
“enable <printer_name>”
Setting up the printer
To add the printer to your UNIX system, run ‘installprinter’ from the command
line. This will bring up the Add Printer Wizard window. Setup the printer in this
window according to the following steps:
1
2
3
Type the name of the printer.
4
5
Specify any printer description in the Description field. This is optional.
6
Type the IP address or DNS name of the printer in the Device textbox for
network-connected printers. On IBM AIX with jetdirect Queue type,
only the DNS name is possible-numeric IP address is not allowed.
7
Queue type shows the connection as lpd or jetdirect in the
corresponding list box. Additionally, usb type is available on Sun Solaris
OS.
8
9
10
11
12
Select Copies to set the number of copies.
Check the Collate option to receive copies already sorted.
Check the Reverse Order option to receive copies in the reverse order.
Check the Make Default option to set this printer as default.
Click OK to add the printer.
Select the appropriate printer model from the model list.
Enter any description corresponding to the type of the printer in the
Type field. This is optional.
Specify the printer location in the Location field.
2. Software Installation
13
Reinstalling driver
6
Mac
If the printer driver does not work properly, uninstall the driver and reinstall it.
3
Execute "./uninstall.sh" command (If you're not logged in as root,
execute the command with "sudo" as "sudo ./uninstall.sh").
4
Proceed with uninstallation.
8
1
Open the Applications folder > Samsung > Printer Software
Uninstaller.
2
3
4
5
To uninstall printer software, click Continue.
The utility should be used to delete the printer installed in the system.
Check the program you want to delete and click Uninstall.
To re-install it, use the command “. /install –i” to reinstall the binaries.
UNIX
Enter the password and click OK.
After the uninstallation is finished, click Close.
1
Run “uninstallprinter” command from the terminal.
It will open the Uninstall Printer Wizard.
The installed printers are listed in the drop-down list.
If a machine has already been added, delete it from the Print Setup Utility
or Print & Fax.
7
Linux
If the printer driver does not work properly, uninstall the driver and reinstall it.
1
2
2
3
4
5
Select the printer to be deleted.
Click Delete to delete the printer from the system.
Execute the “. /install –d” command to uninstall the whole package.
To verify removal results, execute the “. /install –c” command.
Open Terminal program.
Move to uld folder extracted from Unified Linux Driver package.
2. Software Installation
14
3. Printing/Scanning/
Faxing
This chapter explains common printing, scanning, and faxing tasks.
This chapter includes:
• Printing
16
• Scanning (only user with scan machine)
22
• Faxing (only user with scan machine)
23
Supported operating system may differ according to your model.
Printing
Changing the machine settings
1
Mac
You can use advanced printing features when using your machine.
Some features may not be available depending on models or options. It
means that the features are not supported.
Printing a document
When you print with a Mac, you need to check the printer driver settings in each
application you use. Follow the steps below to print from a Mac:
1
2
Open the document to print.
3
Choose your paper size, orientation, scaling, other options, and make
sure that your machine is selected. Click OK.
4
5
6
Open the File menu and click Page Setup (Document Setup in some
applications).
Open the File menu and click Print.
Choose the number of copies and indicate which pages to print.
Click Print.
Open an application and select Print from the File menu. The machine name,
which appears in the printer properties window, may differ depending on the
machine in use. Except for the name, the composition of the printer properties
window is similar to the following.
• The setting options may differ depending on printers and Mac OS
version.
• The following panes may differ, depending on your operating system or
the application you are using.
Layout
You can select various ways to layout your document. Also, you can print
multiple pages on one sheet of paper.
Paper Handling
You can select collate, pages to print, page order, and scale page size.
Paper Feed
You can change tray to print.
3. Printing/Scanning/Faxing
16
Printing
Graphic/Paper
Advanced Options
This will let you get the best quality printout. If you load a different type of print
material, select the corresponding paper type. Also, use the Quality options to
adjust the print quality for your specific printing needs.
You can use advanced printing features such as watermark, poster, and booklet.
Special Page (Cover Page)
Job Handling
This option allows you to choose how to print the printing file by using the hard
disk drive in your machine. This option allows you to choose how to print or save
the printing file by using the HDD in your machine. This option allows you to
print with the given permission.
• If you want to encrypt job accounting password, refer to the question
mark on the bottom left corner of the printer properties pane.
• Administrators can enable job accounting and configure permissions in
the control panel or SyncThru™ Web Service. For the detailed
information about them, refer to the User Guide on the supplied CDROM.
Finishing
This feature is available only when the optional standard finisher or booklet
finisher is installed.
Some models are only supporting cover page option.
You can select the add cover page, insert page, set exception page and etc.
Two-sided Printing (Manual)
Some models are not supporting automatic duplex printing.
You can duplex printing manually with this option.
Printing multiple pages on one sheet
You can print more than one page on a single sheet of paper. This feature
provides a cost-effective way to print draft copies.
You can set various finishing options. You can select the print output options
such as staple, offset and etc.
3. Printing/Scanning/Faxing
17
Printing
1
2
3
4
Open an application, and select Print from the File menu.
Select Layout from the drop-down list under Orientation. In the Pages
per Sheet drop-down list, select the number of pages you want to print
on one sheet of paper.
3
4
5
Select a binding orientation from the Two-Sided option.
Select the other options to use.
Click Print and the machine prints on both sides of the paper.
Select the other options to use.
Click Print.
If you print more than 2 copies, the first copy and the second copy might
print on the same sheet of paper. Avoid printing on both sides of paper
when you are printing more than 1 copy.
The machine prints the selected number of pages to print on one sheet
of paper.
Printing on both sides of the paper
Some features may not be available depending on models or options. It
means that the features are not supported.
Using help
Click the question mark on the bottom-left corner of the window and click on
the topic you want to know about. A pop-up window appears with information
about that option's feature, which is provided from the driver.
Before printing in the duplex mode, decide on which edge you will be binding
your finished document. The binding options are, as follows:
•
Long-Edge Binding: This option is the conventional layout used in book
binding.
•
Short-Edge Binding: This option is the type often used with calendars.
1
2
From your Mac application, select Print from the File menu.
Select Layout from the drop-down list under Orientation.
3. Printing/Scanning/Faxing
18
Printing
2
Linux
Some features may not be available depending on models or options. It
means that the features are not supported.
7
8
Change other printing options in each tab, if necessary.
Click Print.
Automatic/manual duplex printing may not be available depending on
models. You can alternatively use the lpr printing system or other
applications for odd-even printing.
Printing a document
Printing files
There are a lot of Linux documents that allow you to print using Common UNIX
Printing System (CUPS). You can print on your machine from any such
application.
1
2
You can print text, image, pdf files on your machine using the standard
CUPS directly from the command line interface. The CUPS lp or lpr utility allows
you to do that. You can print these files by using below command format.
Open the document to print.
"lp -d <printer name> -o <option> <file name>"
Open the File menu and click Page Setup (Print Setup for some
Please refer to lp or lpr main page on your system for more details.
applications).
3
Choose your paper size, orientation, and make sure that your machine is
selected. Click Apply.
4
5
6
Open the File menu and click Print.
Configuring Printer Properties
You can change the default printing options or connection type with Printing
utility supplied by o/s.
Select your machine to print.
Choose the number of copies and indicate which pages to print.
3. Printing/Scanning/Faxing
19
Printing
1
Launch Printing utility(Go to System > Administration > Printing
menu or execute "system-config-printer" command in Terminal
program).
1
Execute “printui <file_name_to_print>” command.
For example, if you are printing “document1”
printui document1
2
3
4
Select your printer and double-click it.
This will open the UNIX Printer Driver Print Job Manager in which the
user can select various print options.
Change default printing options or connection type.
Click Apply button.
3
Unix
2
3
4
Select a printer that has been already added.
Select the printing options from the window such as Page Selection.
Select how many copies are needed in Number of Copies.
To take advantage of the printer features provided by your printer driver,
press Properties.
Some features may not be available depending on models or options. It
means that the features are not supported.
5
Press OK to start the print job.
Proceeding the print job
Changing the machine settings
After installing the printer, choose any of the image, text, or PS files to print.
The UNIX printer driver Print Job Manager in which the user can select various
print options in printer Properties.
The following hot keys may also be used: “H” for Help, “O” for OK, “A” for Apply,
and “C” for Cancel.
3. Printing/Scanning/Faxing
20
Printing
General tab
Text tab
•
Paper Size: Set the paper size as A4, Letter, or other paper sizes, according
to your requirements.
Set the character margin, line space, or the columns of the actual print output.
•
Paper Type: Choose the type of the paper. Options available in the list box
are Printer Default, Plain, and Thick.
Margins tab
•
Paper Source: Select from which tray the paper is used. By default, it is Auto
Selection.
•
Orientation: Select the direction in which information is printed on a page.
•
Duplex: Print on both sides of paper to save paper.
•
Use Margins: Set the margins for the document. By default, margins are not
enabled. The user can change the margin settings by changing the values in
the respective fields. Set by default, these values depend on the page size
selected.
•
Unit: Change the units to points, inches, or centimeters.
Printer-Specific Settings tab
Automatic/manual duplex printing may not be available depending on
models. You can alternatively use the lpr printing system or other
applications for odd-even printing.
•
Multiple pages: Print several pages on one side of the paper.
•
Page Border: Choose any of the border styles (e.g., Single-line hairline,
Double-line hairline)
Select various options in the JCL and General frames to customize various
settings. These options are specific to the printer and depend on the PPD file.
Image tab
In this tab, you can change the brightness, resolution, or image position of your
document.
3. Printing/Scanning/Faxing
21
Scanning (only user with scan machine)
4
5
Mac
You can scan documents using Image Capture program. Mac OS X offers Image
Capture program.
Linux
1
Make sure that the machine is connected to your computer and
powered on.
1
2
Make sure that your machine is connected to a network.
2
Place a single document face down on the document glass, or load the
documents face up into the document feeder.
Place a single document face down on the document glass, or load the
documents face up into the document feeder.
3
3
4
5
6
Open the Applications folder and run Image Capture.
Launch a scan application such as xsane or simple-scan (If it's not
installed, please install it manually to use scan features. For example, you
may use "yum install xsane" for rpm package systems and "apt-get install
xsane" for deb package systems to install xsane).
4
5
Select your device from the list and set the scan options to apply.
Select your device below SHARED.
Set the scan options on this program.
Click the Scan button.
Scan and save your scanned image.
• If scanning does not operate in Image Capture, update Mac OS to the
latest version.
• For more information, refer to the Image Capture’s help.
• You can also scan using TWAIN-compliant software, such as Adobe
Photoshop.
• You can scan using Samsung Easy Document Creator software. Open
the Applications folder > Samsung folder > Samsung Easy Document
Creator.
3. Printing/Scanning/Faxing
22
Faxing (only user with scan machine)
6
Sending a fax (Mac)
10
If necessary, you can send the fax with cover page, check Use Cover
Page.
Enter the subject and message of the fax job.
To send a fax from your computer, the Fax Utilities program must be installed.
This program is installed when you install the printer driver.
You can set more detailed options for cover page option in Samsung Fax
Cover Page. Select Samsung Fax Cover Page from the drop-down list
under Orientation.
The following steps are based on the Mac OS X 10.6. Depending on the OS
version, the following steps will be different.
1
2
Make sure that your machine is connected to a network.
Place a single document face down on the document glass, or load the
documents face up into the document feeder.
11
12
Click Fax.
The Fax Journal icon (
) appears on your Mac dock. Click the icon.
You can see the status of the fax job. You can also delete, hold, resume,
3
4
5
6
7
8
9
Open the document to be sent.
and pause the fax job.
Select Print from the File menu.
Select your printer name from the drop-down list in Printer.
Choose the number of copies and pages.
Choose your paper size, orientation, and scale.
Enter the recipients’ fax number into To’s input area. You can also use
Addresses pressing
button, if you have stored frequently used fax
numbers.
If necessary, enter the access code in Dialing Prefix input area.
3. Printing/Scanning/Faxing
23
4. Troubleshooting
This chapter gives helpful information for what to do if you encounter an error. If you cannot find a solution in the User's
Guide or the problem persists, call for service.
This chapter includes:
• Common Mac problems
25
• Common Linux problems
26
Common Mac problems
Condition
The machine does not print PDF files
correctly. Some parts of graphics, text, or
illustrations are missing.
Suggested solutions
Printing the PDF file as an image may enable the file to print. Turn on Print As Image from the Acrobat printing options.
It will take longer to print when you print a PDF file as an image.
Some letters are not displayed normally
during cover page printing.
Mac OS cannot create the font while printing the cover page. The English alphabet and numbers are displayed normally on
the cover page.
When printing a document in Mac with
Acrobat Reader 6.0 or higher, colors print
incorrectly.
Make sure that the resolution setting in your machine driver matches the one in Acrobat Reader.
Refer to the Mac OS User Guide that came with your computer for further information on Mac error messages.
4. Troubleshooting
25
Common Linux problems
Condition
Suggested solutions
When printing more than one
copy, the second copy does not
print.
The problem occurs on Ubuntu 12.04 due to the problem in standard CUPS filter 'pdftops'. Update 'cups-filters' package to version
1.0.18 to fix the problem ('pdftops' is a part of 'cups-filters' package).
Unchecking the collate option in
the Print Dialog does not work.
For some distributions, GNOME Print Dialog has an issue handling the collate option. As Workaround, set the default value of collate
option to False using the system's printing utility(execute "system-config-printer" in the Terminal program).
Printing always works with
duplex.
This duplex issue was in Ubuntu 9.10 CUPS package. Update CUPS version to 1.4.1-5ubuntu2.2.
Printer is not added through
system's printing utility.
The problem occurs on Debian 7 due to the defect in 'system-config-printer' package of the Debian 7 (http://bugs.debian.org/cgibin/
bugreport.cgi?bug=662813 in Debian bug tracking system). Please use another way to add printer (CUPS WebUI for example)
Paper size and orientation are
disabled in the Print Dialog when
opening text files.
The problem occurs on Fedora 19 and it's related to 'leafpad' text editor on Fedora 19. Please use other text editors like 'gedit'.
Refer to the Linux OS User Guide that came with your computer for further information on Linux error messages.
4. Troubleshooting
26
Index
C
common Mac problems
convention
printing
system requirements
Unix
11
general icons
5
scanning
driver installation for network connected 11
driver installation for USB cable connected
9
printer properties
19
printing
19
scanning
22
system requirements
linux scanning
M
Mac
7
22
22
Linux
19
Mac
16
UNIX
20
network
scanning
Linux
26
6
S
driver installation
Linux
Mac
UNIX
11
11
12
n-up printing
Mac
20
printing a document
N
L
common Linux problems
UNIX
Macintosh
12
G
16
18
Mac
driver installation for network connected 11
5
D
driver installation
25
Linux scanning
22
Macintosh
22
U
UNIX
17
driver installation for network connected 12
printing
P
20
system requirements
printer preferences
Linux
7
USB cable
19
printing
driver installation
9
using help
Linux
19
Mac
16
multiple pages on one sheet of paper
Mac
17
18
W
Windows
printing
15
printing on both sides of paper
Index
27
Download PDF

advertising