Samsung | T27A950 | Samsung T27A950 사용자 매뉴얼

E-MANUAL
Contents
Channel Menu
• Blocking Programs
97
• Using Samsung Apps
211
• View Channel Info.
1
• Economical Solutions
100
• Smart Hub Troubleshooting
216
• Using the Channel Menu
2
• Picture In Picture (PIP)
101
• About AllShare™
219
• Using the Favorites Channels
19
• Other Features
104
• Setting Up AllShare™
221
• Memorizing Channels
21
• Support Menu
116
• What is Anynet+
227
• Other Features
24
• Setting Up Anynet+
232
• Switching between Anynet+ Devices
234
• Listening through a Receiver
235
• Troubleshooting for Anynet+
237
Advanced Features
Basic Features
• Using the 3D function
125
• Changing the Preset Picture Mode
25
• Getting Started with Smart Hub
139
• Adjusting Picture Settings
27
• Smart Hub
140
• Changing the Picture Size
29
• Configuring the Smart Hub
163
Other Information
• Changing the Picture Options
34
• Using Smart Hub
167
• Troubleshooting
240
• Using the TV with Your PC
47
• Connecting a USB Device
168
• Anti-theft Kensington Lock
251
• Changing the Preset Sound Modes
49
• Connecting to a PC through a network
173
• License
253
• Adjusting Sound Settings
50
• Screen Display
176
• Recorded TV
177
• Videos
192
Preference Features
• Music
199
• Connecting to a Wired Network
60
• Photos
203
• Connecting to a Wireless Network
70
• Smart Hub - Additional Functions
204
• Setting the Time
91
Channel Menu
❑❑ View Channel Info.
You can view detailed information about the current channel and the
upcoming program.
Press the 정보표시 button. To view the information of a program while
watching TV, use l and r.
Tue, Jan 4 7:54 pm
DTV Cable
Added Ch.
Dolby Digital
Korean
No detailed information.
Information
•• This may differ depending on the broadcast signal.
English
▶
Channel Menu
❑❑ Using the Channel Menu
Press the 스마트허브 button and select
a menu.
Search
Recommended
The corresponding menu screen appears.
Favorites
Music
Channel
Schedule Manager
Guide
Source
Web Browser
Videos
Photos
AllShare
a Login
b Sort by
{ Edit Mode
} Settings
●● The displayed image may differ depending
on the model.
◀
▶
English
■■ Guide
Press the 방송안내 button to view the program schedule of each
channel.
NN You can only set it for digital broadcasts.
●● aRed (Schedule Mgr): Shows the reserved program list. Press
the 정보표시 button to view the detailed information and cancel a
reservation.
◀
●● bGreen (-2 Hours): You can view the broadcast information up to 2
hours ago.
English
▶
●● { Yellow (+2 Hours): You can view the broadcast information for the
next 2 hours.You can view the broadcast information up to 2 hours
into the future.
●● } Blue (Exit): The Guide screen is closed.
●● ` (Information): Shows detailed information about the selected
digital broadcast.
◀
However, this is only displayed when it is provided by the
broadcasting station.
●● E (Watch / Schedule): If you select a program that is currently
being broadcast, you can watch the selected program.
If you select a program to be broadcast, you can reserve the
selected program. To cancel a schedule, press the ENTERE button
again and select Cancel schedule.
English
▶
■■ Schedule Manager
OO 스마트허브 → Schedule Manager → ENTERE
You can set or modify the time for Timer Viewing or cancel the setting.
To open the program guide screen, select Guide at the top right
corner of the screen.
●●
Guide: The Guide screen will appear. Refer to "Program Guide"
in the e-Manual for details.
◀
▶
English
Using the Timer Viewing
If you reserve a channel at a date and time in advance, the channel
is automatically tuned to the reserved channel at that time even when
you are watching another channel.
1. Select Schedule Manager. The Schedules screen appears.
2. Press the Select ENTERE button and select Timer Viewing using
the l or r button.
◀
3.Configure the Antenna, Channel, Repeat and Start Time settings.
●● Antenna: Select an antenna to watch.
●● Channel: Select the desired channel.
English
▶
●● Repeat: Select Once, Manual, Sat~Sun, Mon~Fri or EveryDay. If
you select Manual, you can set the day you want.
NN The c mark indicates a day you selected.
●● Date: You can set a desired date.
NN Date is available only when you select Once in Repeat.
●● Start Time: You can set the start time to a particular time.
◀
NN You can only reserve Added Channels.
NN To modify or cancel the reserved channel information, select a
reserved schedule, and in the Information window, select either
Cancel schedule or Edit.
NN Press the 복귀 button to return to the Schedule Manager screen.
English
▶
■■ Channel List
You can see the channel list of the Added
Channels and Favorites 1~5 items.
NN Press the 채널목록 button to view the
Channel List screen.
●● Added Channels: Show all added
channels.
◀
●● Favorites 1~5: You can view the channels
Channel List
Added Channels
6-1
SBS HD
7-1
KBS HD
)%ᙹ༊ऽ௝ษ⥥౩ḡ޹✙
04#%57
,#4)%
&#4%57
.#$%57
-----⾄ᯝၹ
-----⾄ᯝၹ
-----⾄ᯝၹ
-----⾄ᯝၹ
-----⾄ᯝၹ
-----⾄ᯝၹ
Cable
a Antenna { Program View L CH Mode E Watch k Page
●● The displayed image may differ depending
on the model.
registered to the Favorites.
NN If you want to view the list of favorite channels, press the
채널목록 button, and then press the r (CH Mode) button to display
Favorites 1~5. Press the l button to return to the Added Channels.
English
▶
NN Using the colored and function buttons with the Channel List.
●● a Red (Antenna): Switches the broadcast signal.
●● { Yellow (Program View / Channel View): You can view the program
schedule for the selected digital channel. If you press this button
again, the Channel List is displayed.
●● L (CH Mode / Channel): If you register frequently viewed channels
◀
to the Favorites, you can set the CH Mode to Added Channels or
Favorites 1~5.
NN { Press (Program View). You can move to another digital channel
using the l or r button.
●● E (Watch): You can watch the selected channel.
●● k (Page): You can move to the previous or next page.
English
▶
Channel Status Display Icons
Icon
Description
a
An analog Channel
)
Scheduled Program
\
Locked channel
◀
▶
English
How to use Timer Viewing in Channel List (digital channels only)
In the Channel List, you can reserve viewing a program by using Program
View.
1. Press the 채널목록 button.
2 Select the channel to reserve a program viewing for and press
{ (Program View).
◀
3 Press the u or d buttons to select the desired program, and then
press the INFO button.
4.Select Timer Viewing.
NN To cancel a schedule, select Cancel Schedules in the Information
window of the program.
English
▶
■■ Channel
OO 스마트허브 → Channel → ENTERE
Select a channel list from among All Channels
and Added Channels. Using the menu at the
top right of the screen, you can change the
broadcast signal or edit the channels.
●●
◀
Antenna: Switches the broadcast
signal.
Channel
All Channels
,#4)%
,#4)%
)%ᙹ༊ऽ௝ษ
)%ᝁ֥✚Ḳ݅
<)%>ᙹ༊ၙ‫‘ܩ‬..
0#4%57
0#4✚ᄥʑ⫮
&#4%57
&#4݅Ƚ⥥௝
.#4%57
ᯝၹ
ᯝၹ
ᯝၹ
ᯝၹ
ᯝၹ
ᯝၹ
ᯝၹ
ᯝၹ
ᯝၹ
ᯝၹ
ᯝၹ
ᯝၹ
Added Channels
●● The displayed image may differ depending on the
model.
selected signal
Edit Mode: Switches the mode to Edit Mode.
English
ऽ௝ษᜅ⟹ᖽ
NN The icon may differ depending on the
●●
4#4)%
▶
●● Select All: To select all the channels in the current page, choose
Select All at the top left corner of the screen and then press
ENTERE.
NN To switch the channel mode, place the pointer over the
All Channels or Added Channels item at the top or bottom and press
the ENTERE button. The corresponding channel list appears.
◀
▶
English
Utilizing the Edit Menu
1 Press ENTERE on the Edit Mode icon at the top right corner of
the screen. The Edit Mode window will appear at the bottom.
2 Move to the channel you want and press ENTERE. The c mark
will appear to the next of the selected channel, and the Edit Mode
menu at the bottom will become active.
–– More than one channel can be selected.
◀
–– To deselect a channel, press ENTERE.
3 Press the d button to move to the Edit menu window at the
bottom, and press ENTERE. The available Edit Favorites, Lock /
Unlock, and Registered / Delete menus will become active.
4 Press a menu to configure its settings.
English
▶
NN In the Channel screen, press the 간편메뉴 button to use the
following functions.
●● Upcoming Program (digital channels only): In the Channel List,
you can view the current and Upcoming Programs of the selected
channel.
NN Upcoming Programs are only displayed when the current time
is set and the corresponding program information exists.
◀
●● Add / Delete
간편메뉴T
: You can Add or delete a selected channel.
English
▶
NN NOTE
●● You can view the channels deleted from the Added
Channels in the All Channels item.
●● The gray channels are deleted channels.
●● Add only appears if you have selected a deleted channel
on the All Channels list.
●● Delete only appears if you have selected an Added
◀
Channels on the Added Ch. or All Channels list.
English
▶
●● Lock / Unlock: You can lock some of the channels so that your
children cannot watch inappropriate programs.
NN Channel Lock must be set to On in the (System → Security)
menu to use Lock.
●● Edit Favorites
간편메뉴T
: You can register frequently watched channels
to the Favorites.
NN Channels registered to the Favorites are marked by “F”.
◀
NN To register multiple channels to the Favorites, refer to the
“Using the Favorites Channels” section.
English
▶
●● Channel Name Edit (analog channels only): You can rename a
channel.
Channel Status Display Icons
Icon
◀
Operation
a
An analog channel
c
A selected channel
F
A favorite channel
\
Locked channel
▶
English
❑❑ Using the Favorites Channels
■■ Favorites
OO 스마트허브 → Favorites → ENTERE
You can register frequently watched channels to the Favorites so that
you can select them quickly. To select one of the Favorites 1~5, move
to an item and press the ENTERE button.
●●
◀
●●
View Mode: You can change the viewing mode to List View or
Thumbnail View.
Antenna: Switches the broadcast signal.
NN The icon may differ depending on the selected signal.
●●
Sort: You can sort the channels by the Type or Name.
●●
Edit Mode: You can remove a channel from the Favorites list.
English
▶
Setting Favorites
1. In the Channel screen, select
appears.
Edit Mode. The Edit Mode window
2. Select a channel to be registered to the Favorites and press the
ENTERE button.
NN Select Select All to select all the channels in the corresponding
channel list.
◀
NN The c mark indicates a day you selected.
3.After selecting a channel, select Edit Favorites.
4.Select an item from Favorites 1~5.
NN You can select more than one Favorites list.
5.Select OK. When the Favorites setting is complete, the configured
channels appear in the corresponding Favorites list.
English
▶
❑❑ Memorizing Channels
OO 메뉴m → Channel → ENTERE
■■ Antenna (Air / Cable)
간편메뉴T
You can set the DTV Channel to Air or Cable.
◀
▶
English
■■ Auto Program
간편메뉴T
Automatically search and save all received channels.
NN The Auto Program operation takes about 6~7 minutes.
NN If Channel Lock is set to On in the (System → Security) menu, you must
enter your password. The initial PIN is “0-0-0-0”.
◀
▶
English
NN NOTE
●● DTV Air refers to digital broadcast channels that are carried over
the terrestrial broadcast UHF band and can be received by a
UHF antenna.
●● DTV Cable refers to digital broadcast channels that are forwarded
by the local cable TV network company on the network
company allocated band over cable.
◀
▶
English
❑❑ Other Features
OO 메뉴m → Channel → Fine Tune → ENTERE
■■ Fine Tune
(analog channels only)
For analog channels, when the reception is bad, you can make the
screen sharper.
◀
NN If you do not save the fine tuning data, and you move to another
channel and then return to the channel that you have just finetuned, the channel will no longer be fine-tuned. For fine-tuned
channels, the channel number is marked with <*>.
NN To initialize a fine-tuned channel, select Reset in the Fine Tune
window.
English
▶
Basic Features
❑❑ Changing the Preset Picture Mode
OO 메뉴m → Picture → Picture Mode → ENTERE
■■ Picture Mode
간편메뉴T
If playing a movie or watching TV in a bright lightening condition,
switch the picture mode according to the viewing conditions for the
optimal performance.
◀
NN HDMI1/DVI mode(when a PC is connected), you can only set the
Picture Mode to either Standard or Entertain.
English
▶
●● Dynamic: Select this mode when the TV is installed in a shop or
on a office wall and the ambient illumination is bright. You can see
the picture more sharply.
●● Standard: Select this mode when you watch TV at home in a
normal viewing environment.
●● Natural: Select this mode to view pictures in a natural mode as you
actually see them and in a quality comfortable for your eyes.
◀
●● Movie: Select this mode when you are watching a movie. You can
view the picture comfortably even when the ambient illumination is
dark or your eyes are strained.
●● Entertain: Select this mode when you are playing a game in HDMI1/
DVI mode(when a PC is connected) or you are watching a video.
You can view pictures with lots of movement.
NN It is available in HDMI1/DVI mode(when a PC is connected).
English
▶
❑❑ Adjusting Picture Settings
OO 메뉴m → Picture → ENTERE
■■ Samsung MagicAngle
◀
This feature allows you to see optimal screen quality according to
your viewing position. When viewing the screen at an angle from
below, above or the side of the TV, by setting the appropriate mode
for each position you can obtain a similar picture quality as viewing
the screen directly from the front.
●● Samsung MagicAngle (Off / Lean Back Mode / Standing Mode): Select
the viewing from the front, a slightly or the upper position.
●● Mode(1-10): You can set suitable picture quality as needed.
English
▶
■■ Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R)
You can adjust the visual quality of the screen according to the
Picture Mode.
NN Select a Picture Mode. Then, if you adjust an item, the changed
setting is saved in the selected Picture Mode.
NN In HDMI1/DVI mode(when a PC is connected), you can adjust the
Backlight, Contrast, Brightness and Sharpness.
◀
NN Lowering picture brightness reduces power consumption.
English
▶
❑❑ Changing the Picture Size
OO 메뉴m → Picture → Screen Adjustment →
ENTERE
■■ Screen Adjustment
●● Picture Size: You can choose a picture size according to the
content.
NN You can select a picture size using the 화면크기 button. When-
ever you press the button, the Picture Size is changed.
◀
16:9: The 16:9 aspect ratio for DVD or wide-broadcasts.
Zoom1: This is the aspect ratio that stretches the 16:9 ratio
vertically.
Zoom2: This is the aspect ratio that vertically stretches the Zoom1
setting.
Wide Fit: This is the aspect ratio that automatically fits the 4:3
aspect ratio picture to the screen when you are watching a digital
broadcast.
NN Available with HD 1080i / 720p signals in 16:9 mode.
English
▶
4:3: This is the 4:3 aspect ratio for a video or normal broadcast. If
you select the 4:3 setting, the black spaces on the left and right
may differ.
NN If you watch a still picture or video in the 4:3 aspect ratio for
a long period of time, a persistent image may remain on the screen.
Since this problem is not covered by the warranty, watching content in
full screen is recommended.
◀
Screen Fit: This is the picture size that shows the original picture
without cutting any part of the picture when you watch HDMI,
component or DTV input.
NN With some products, lines may appear around the edges.
NN This works in HDMI (720p, 1080i, 1080p), Component (1080i,
1080p) and DTV (1080i).
Smart View 1: Reduces the 16:9 picture by 50%.
Smart View 2: Reduces the 16:9 picture by 25%.
English
▶
NN You can only select Smart View 1 in HDMI mode, and you can
select Smart View 2 in HDMI mode or when you watch DTV.
NN When you play content on the Smart Hub, the supported picture
size may differ depending on the input source.
●● Position: Adjusts the picture position. You can configure it when the
Zoom1, Zoom2 or Wide Fit setting is selected.
NN Select Zoom1, Zoom2 or Wide Fit and then select Position. Please
◀
complete the following in the Position screen.
1 Select Position, and press ENTERE twice.
2 Press the u or d button to move the picture up or down.
3 Press the ENTERE button.
NN Position can be configured in HDMI (1080i, 1080p) or Component
(1080i, 1080p) mode.
English
▶
NN If you select Screen Fit in HDMI (1080i/1080p) or Component
(1080i/1080p) mode, the screen should be located at the center.
Select Position and complete the following in the Position screen.
1 Select Position, and press ENTERE twice.
2 Press the u, d, l or r button to move the picture.
3 Press the ENTERE button.
NN If you want to reset the pictures to its original position, select
◀
Reset in the Position screen. The picture will be set to its default
position.
English
▶
●● Available picture size by input mode. The available picture size
may differ depending on the external input mode of the TV.
◀
Input Source
Picture Size
ATV, AV, Component (480i, 480p)
16:9, Zoom1, Zoom2, 4:3
HDMI (720p, 1080i, 1080p)
Smart View 1
DTV (1080i), HDMI (720p, 1080i, 1080p)
Smart View 2
DTV (1080i), Component (1080i, 1080p),
HDMI (720p, 1080i, 1080p)
16:9, 4:3, Wide Fit, Screen Fit
HDMI1/DVI
16:9, 4:3
NN For analog and digital broadcasts, the available picture sizes
differ.
NN The Picture Position menu may not appear depending on the
picture size.
English
▶
❑❑ Changing the Picture Options
■■ Advanced Settings
OO 메뉴m → Picture → Advanced Settings → ENTERE
(All Advanced Settings are available in the Standard or Movie modes.)
You can create a picture by adjusting the
color, contrast and so on.
◀
NN In HDMI1/DVI mode(when a PC is connect-
ed), you can only use the Gamma or White
Balance setting.
Advanced Settings
Black Tone
Dynamic Contrast
Off
Medium
Shadow Detail
-2
Gamma
0
Expert Pattern
Off
RGB Only Mode
Off
Color Space
Native
●● The displayed image may differ
depending on the model.
English
▶
●● Black Tone (Off / Slightly Dark / Dark / Darkest): Adjusts the black
tone to enhance the depth of the picture.
●● Dynamic Contrast (Off / Low / Medium / High): Automatically adjusts
the screen contrast to balance the brightness. Using this function,
you can keep the screen contrast at an optimal level.
●● Shadow Detail (-2 ~ +2): Adjusts the brightness of a dark picture.
●● Gamma: Adjusts the intermediate brightness of a picture.
◀
▶
English
●● Expert Pattern (Off / Pattern1 / Pattern2): You can adjust the screen
without using a pattern generator or filter equipment. If the menu
window disappears or another menu window appears when you
adjust the screen, the changed value is saved and the Expert
Pattern window disappears.
Off: Turns the Expert Pattern function off
Pattern1: You can adjust the contrast level and the brightness level
using this pattern.
◀
Pattern2: You can adjust the color saturation and the tint using this
pattern.
NN When the Expert Pattern is running, there is no sound.
NN You can only use this in DTV, Component or HDMI mode.
English
▶
●● RGB Only Mode (Off / Red / Green / Blue): This is a function for
experts. You can select one of the R, G and B colors to adjust the
color saturation and the tint of a device such as a DVD player,
home theater and so on.
●● Color Space (Auto / Native / Custom): You can select an available
color space.
Auto: Automatically sets the color range depending on the input
video source.
◀
Native: Sets a wider color range than that of the input video
source.
Custom: Adjusts the color range to suit your preference.
NN If you select Custom, you can reset the Red, Green and Blue
ranges.
English
▶
●● White Balance: Adjusts the red, green, and blue brightness so that
the brightest point of a picture becomes white.
R-Offset / G-Offset / B-Offset: You can adjust the offsets of the
Red, Green and Blue colors of the dark parts of a picture.
R-Gain / G-Gain / B-Gain: You can adjust the gains of the Red,
Green and Blue colors of the bright parts of a picture.
Reset: Resets the White Balance settings to the default settings.
◀
▶
English
●● 10p White Balance (Off / On): You can adjust the white balance of each
section of the Red, Green and Blue colors by dividing the colors into 10
sections.
NN Some external devices may not support this function.
NN Available for all inputs when you set the Picture Mode to Movie.
Interval: Select interval to adjust.
Red: Adjust the red level.
◀
▶
Green: Adjust the green level.
Blue: Adjust the blue level.
Reset: Resets the 10p White Balance to its default settings.
English
●● Flesh Tone: You can adjust the flesh tone to be more or less red.
●● Edge Enhancement (Off / On): You can sharpen the edge detail.
●● Motion Lighting (Off / On): Reduces the power consumption by
controlling the brightness according to the amount of movement in
the picture.
NN If Backlight, Contrast or Brightness is changed, the Motion Lighting
function will automatically be disabled.
◀
NN 3D is not supported.
▶
English
■■ Picture Options
OO 메뉴m → Picture → Picture Options → ENTERE
NN In HDMI1/DVI mode(when a PC is connected), you can only use the
Color Tone setting.
●● Color Tone (Cool / Medium / Warm1
/ Warm2): You can control the color
temperature.
◀
NN When the Picture Mode is Dynamic, you
can only set the Color Tone setting to
Cool or Standard.
Picture Options
Color Tone
Standard
Digital Noise Filter
Auto
MPEG Noise Filter
Auto
HDMI Black Level
Medium
Film Mode
Auto Motion Plus Standard
NN The changed value is saved in the se-
lected Picture Mode. (Sharp, Standard,
Natural and Movie Picture Modes)
English
Off
●● The displayed image may differ
depending on the model.
▶
●● Digital Noise Filter (Off / Low / Medium / High / Auto / Auto Visualization):
Use this function when there is interference on the picture such as a
spot or the picture trembles.
Auto / Auto Visualization: Automatically detects and removes the noise
on the screen.
Low / Medium / High : You can select the level of the screen noise
reduction function.
◀
NN You can only select Auto Visualization mode for analog channels.
●● MPEG Noise Filter (Off / Low / Medium / High / Auto): Use this function
when there is noise in the video such as a spot or the picture
trembles.
Auto: Automatically detects and removes the noise on the screen.
Low / Medium / High: You can select the level of the video noise
reduction function.
NN This is not supported in HDMI1/DVI mode(when a PC is connected).
English
▶
●● HDMI Black Level (Normal / Low): When you watch TV by connecting
an external device such as a DVD player or set-top box, the
visual quality may deteriorate (black level, lower contrast, dimmed
color, etc.) depending on the connected external device. At this
time, adjust the HDMI Black Level to control the visual quality.
NN You can only adjust the HDMI Black Level when the external in-
put is HDMI and the input signal is RGB.
●● Film Mode (Off / Auto1 / Auto2): This mode is appropriate for viewing
◀
movies. If you set the Film Mode to Auto, the visual quality is
automatically set to the optimal setting for movies.
Auto1: Automatically runs the Film Mode function depending on the
input video.
Auto2: Provides the visual quality optimized for viewing captions.
NN This function only works in TV, AV, Component (480i/1080i) and
HDMI(480i/1080i).
English
▶
●● Auto Motion Plus (Off / Clear / Standard / Smooth / Custom / Demo):
Removes the drag from fast scenes that have a lot of movement to
provide a clearer picture.
NN The Information screen of the TV shows the resolution and
frequency of the received video signal (60 Hz). At this time, the
frequency is not the same as the one displayed by the TV when
the Auto Motion Plus function runs.
NN If noise appears on the screen, set Auto Motion Plus to Off. If
◀
you set Auto Motion Plus to Custom, you can manually
configure the Blur Reduction, Judder Reduction and Reset
settings.
NN If Auto Motion Plus is Demo, you can compare the difference be-
tween on and off modes.
English
▶
Blur Reduction: Adjusts the blur reduction level from video sources.
Judder Reduction: Adjusts the judder reduction level from video
sources when playing films.
Reset: Reset the custom settings.
◀
▶
English
■■ Reset Picture (Yes / No)
Resets the picture settings to the default settings.
◀
▶
English
❑❑ Using the TV with Your PC
You can use the TV as a high-quality, wide PC monitor. You can
watch a TV program through the PIP window while watching a file
saved on the PC on the Sub of the TV.
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
◀
Depending on the version of Windows and the graphics card, the basic
settings and the actual screens on your PC may differ. (In this case,
contact your computer manufacturer or Samsung dealer.)
English
▶
1. From the Windows start menu, click “Control Panel”.
2. Click on “Appearance and Themes” in the “Control Panel” window and
a display dialog-box will appear.
3.Click on “Display” and a display dialog box will appear.
4.Select the “Settings” tab in the Display window.
●● The correct size setting (resolution) [Optimum: 1920 X 1080 pixels]
●● If a vertical-frequency option exists in the dialog box of your
◀
display settings, the correct value is “60” or “60 Hz”. Otherwise,
just click “OK” and close the dialog box.
English
▶
❑❑ Changing the Preset Sound Modes
OO 메뉴m → Sound → Sound Mode → ENTERE
■■ Sound Mode
간편메뉴T
Use the up and down arrow keys to select an option, and then press
ENTERE.
●● Standard: Selects the normal sound mode.
◀
●● Music: Emphasizes music over voices.
●● Movie: Provides the best sound for movies.
●● Clear Voice: Emphasizes voices over other sounds.
●● Amplify: Increase the intensity of high-frequency sound to allow a
better listening experience for the hearing impaired.
NN If Speaker Select is set to External Speaker, Sound Mode
is disabled.
English
▶
❑❑ Adjusting Sound Settings
OO 메뉴m → Sound → Sound Effect → ENTERE
■■ Sound Effect
You can apply a sound effect to the audio stream output from the TV.
NN This function is not supported when the audio is set to External
speakers.
◀
NN Available only when Sound Mode is set to Standard.
●● SRS TruSurround HD (Off / On)
This function provides a virtual 5.1 channel surround sound
experience through a pair of speakers using HRTF (Head Related
Transfer Function) technology.
English
▶
●● SRS TruDialog (Off / On)
If you turn this option On, voice is emphasized while the
background sound is maintained evenly.
●● SRS CS Headphone (Off / On): You can hear virtual 5.1ch surround
sound over the headphones.
●● Equalizer
You can adjust the balance and the level of the sound frequency.
◀
●● Balance L/R: Adjusts the balance between the right and left
speaker.
●● 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts
the volume level of specific bandwidth frequencies.
●● Reset: Resets the Equalizer to its default settings.
NN If Speaker Select is set to External Speaker, Equalizer is disabled.
English
▶
■■ 3D Audio (Off / Low / Medium / High)
3D Audio technology provides stereophonic sound by controlling the
audio depth so that users can concentrate on 3D video.
NN This function is only supported when you watch 3D content.
◀
▶
English
■■ Broadcast Audio Options
●● Preferred Language
(Digital Broadcast)
◀
Since digital broadcasts may contain more than one audio
language, you can select a language from either Korean, Japanese
or English. If the program contains the configured language,
you can watch the program in the configured language without
changing the configuration.
NN If the program does not contain the configured language, the
program will be displayed with the default language (Korean)
determined by the broadcasting station.
English
▶
●● Auto Stereo
(Analog Broadcast)
If Auto Stereo is set to Auto, the audio is automatically switched to
stereo or mono according to the broadcast signal of the channel
even if you change the channel.
Auto: The audio is automatically switched to stereo or mono
according to the current broadcast signal.
◀
Manual: The audio of the current channel is switched to mono. This
setting is applied to all channels in the same manner.
NN If the sound quality of the stereo program is not good, switch
the audio to Manual. (Manual Setup)
English
▶
●● Multi-Track Sound
(analog channels only)
If the current program has multi-track sound, you can select
multi-track sound to listen to the foreign language only or to both
languages. If the current program is stereo, you can set the sound
to mono or stereo.
Mono: Sets the multi-track sound to mono.
◀
Stereo: Sets the multi-track sound to stereo.
NN Press the 정보표시 button to view the audio information of the
current program.
English
▶
■■ SPDIF Output
If a Dolby Digital audio device is connected, you can hear the audio
in Dolby Digital when you watch Dolby Digital content.
●● Audio Format (PCM / Dolby Digital): You can select a digital audio
output format.
NN The digital audio format may differ depending on the video
signal input.
◀
●● Audio Delay: When you watch TV or video by connecting the digital
audio output to an external device such as an AV receiver, you
can match the lip movements with the voice (lip-sync) when they
do not match due to an audio delay.
English
▶
■■ Speaker Settings
●● Speaker Select (External Speaker / TV Speaker)
Even when you are watching TV, you can listen to the sound
through the speakers of the home theater instead of the TV
speakers.
NN If Speaker Select is set to External Speaker, you can control the
◀
volume with the volume buttons of the TV remote control. In this
case, control the volume with the volume buttons of the home
theater.
NN If Speaker Select is set to External Speaker, the audio setting
function is restricted.
English
▶
●● Auto Volume (Off / Normal / Night)
The volume of each channel may differ. This function equalizes the
volume of all channels to the same level.
Off: Turns the Auto Volume off.
Normal: The Auto Volume function works in normal mode. For day
and night, select Normal.
◀
Night: The Auto Volume function is set to Night mode so that the
volume is set to lower than Normal mode. This mode is effective
when you often watch TV at night.
English
▶
■■ Reset Sound
Reset all sound settings to the factory defaults.
◀
▶
English
Preference Features
❑❑ Connecting to a Wired Network
There are three ways to attach your TV to your LAN using cable:
●● Connect the cable as shown by the figure below when you use an
external-type modem.
The Modem Port on the Wall
External Modem
(ADSL / VDSL / Cable TV)
TV Rear Panel
◀
▶
Modem Cable
LAN Cable
English
●● Connect the cable as shown by the figure below when you use an
external-type modem and an IP sharer.
The Modem Port
on the Wall
TV Rear Panel
External Modem
(ADSL / VDSL / Cable TV)
◀
Modem Cable
LAN Cable
English
IP Sharer (having
DHCP server)
LAN Cable
▶
●● Connect the cable as shown by the figure below when you are
directly connecting it to the LAN port on the wall.
The LAN Port on the Wall
TV Rear Panel
◀
▶
LAN Cable
English
●● If you have a Dynamic Network, you should use an ADSL modem
or router that supports the Dynamic Host Configuration Protocol
(DHCP). Modems and routers that support DHCP automatically
provide the IP address, subnet mask, gateway, and DNS values
your TV needs to access the Internet so you do not have to enter
them manually. Most home networks are Dynamic Networks.
NN You can also view the network information for the static IP
address on the computer.
◀
▶
English
■■ Network Settings
OO 메뉴m → Network → Network Settings → ENTERE
Set the network connection to use various Internet services such as
Smart Hub, AllShare and perform software upgrades.
■■ Network Status
OO 메뉴m → Network → Network Status → ENTERE
◀
You can check the current network and Internet status.
■■ AllShare Settings
OO 메뉴m → Network → AllShare Settings → ENTERE
Selects whether to use the call arrivals text message contents and
schedules set on the network. For details on set up options, refer to
the "AllShare" instructions.
English
▶
■■ Automatic Network Setup
Use the Automatic Network Settings when connecting your TV to a
network that supports DHCP. To set up your TV's cable network
connection automatically, follow these steps:
How to set up automatically
1. In the Network Setup screen, press
Start. The network setup begins.
◀
Network Settings
Select a network connection type.
Wired
2. Select Wired and then Next.
Wireless (General)
WPS(PBC)
3. The network test screen appears
and verifies the network connection.
When the connection has been
verified, the "Internet connection
successful." message appears.
English
One Foot Connection
Previous
Connect to the network using
LAN cable. Please make
Next
sure that the LAN cable is
connected.
●● The displayed image may differ
depending on the model.
Cancel
▶
NN If the connection process fails, check
the LAN port connection.
Network Setting
6/6
Wired network and Internet connection completed.
MAC Address
IP Address
NN If the network information cannot be
automatically retrieved or you want to
manually set the IP address, select “Manual
Network Setup.”.
◀
00:12:fb:2b:56:4d
Subnet Mask
SEC_LinkShare
192.168.11.4
255.255.255.0
Gateway
192.168.11.1
DNS Server
192.168.11.1
Internet is connected successfully.
If you have a problem with using Internet Service, contact your Internet service
IP Setting
OK
provider.
●● The displayed image may differ
depending on the model.
▶
English
■■ Manual Network Setup
Use the Manual Network Setup when connecting your TV to a network
that requires a Static IP address.
Getting the Network Connection Values
To view the Network connection values on most Windows computers,
follow these steps:
1. Right click the Network icon on the bottom right of the screen.
◀
2. In the pop-up menu that appears, click Status.
3. On the dialog that appears, click the Support tab.
4. On the Support Tab, click the Details button. The Network
connection values are displayed.
English
▶
How to set up manually
1. Go to Network Settings screen, press
Start. The Network Setup begins.
2. Select Wired, and then Select Next.
3. Try the network connection. At this
time, select Cancel. The connection is
stopped.
◀
4. When the connection is stopped,
select IP Setup. The IP Setup screen
appears.
English
IP Settings
IP Mode
Manual
IP Address
0.0.0.0
Subnet Mask
0.0.0.0
Gateway
0.0.0.0
DNS Mode
Manual
DNS Server
0.0.0.0
OK
● The displayed image may differ
depending on the model.
▶
5. Set the IP Mode to Manual and enter the network information that
you saw on the PC.
NN DNS Mode is automatically changed if the IP Mode is changed.
6.If you have finished entering the information, select OK. Then the
connection to the network with the entered network information is
re-attempted.
◀
7. When the connection is established, the "Internet is connected
successfully." message appears.
English
▶
❑❑ Connecting to a Wireless Network
You can connect to the Internet by connecting the TV and the
wireless Internet sharer using a Samsung wireless LAN adapter
(WIS09ABGN, WIS09ABGN2 or WIS10ABGN).
The LAN Port
on the Wall
Wireless IP sharer
(router having DHCP
server)
TV Rear Panel
Samsung
Wireless
LAN adapter
◀
LAN Cable
English
▶
The Samsung wireless LAN adapter is optional. To purchase this,
contact a Samsung Electronics dealer or the service center (1588-3366).
Samsung's wireless LAN adapter supports the IEEE 802.11 a/b/g and n
protocols. Samsung Electronics recommends the IEEE 802.11n protocol. If
the connection is established through the IEEE 802.11b/g protocol, videos
may not be played smoothly.
NN NOTE
●● You must use the "Samsung Wireless LAN adapter" (WIS09ABGN,
◀
WIS09ABGN2 or WIS10ABGN) to use a wireless network.
●● To use a wireless network, your TV must be connected to a
wireless IP sharer (either a router or a modem). If the wireless
IP sharer supports DHCP, your TV can use a DHCP or static IP
address to connect to the wireless network.
●● The Samsung Wireless LAN Adapter and the USB extension Cable
are sold separately and are offered by select retailers, Ecommerce
sites and Samsungparts.com.
English
▶
●● Select a channel for the wireless IP sharer that is not currently
being used. If the channel set for the wireless IP sharer is
currently being used by another device nearby, this will result in
interference and communication failure.
–– If you select the Pure High-throughput (Greenfield) 802.11n
◀
mode and the Encryption type is set to WEP, TKIP or TKIP
AES (WPS2Mixed) on your AP or wireless router, Samsung TVs
will not support a connection in compliance with new Wi-Fi
certification specifications.
●● If your wireless router supports WPS (Wi-Fi Protected Setup), you
can connect to the network via PBC (Push Button Configuration)
or PIN (Personal Identification Number). WPS will automatically
configure the SSID and WPA key in either mode.
●● If your router, modem, or device is not certified, it may not
connect to the TV via the "Samsung Wireless LAN adapter."
English
▶
●● Ensure the TV is turned on before you connect the Samsung
Wireless LAN adapter.
●● Connection Methods: You can set up the wireless network
connection in five ways:
–– Auto Setup (Using the Auto Network Search function)
–– Manual Setup
–– WPS (PBC)
◀
–– One Foot Connection
▶
–– Plug & Access
●● The Samsung Wireless LAN adapter may not be recognized when
using a connection via a USB hub or via a USB extension cable
other than the cable supplied.
English
■■ Automatic Network Setup
If a security key (PIN) is set in the wireless sharer, the security key
is required. If you are using a wireless Internet service, ask your
service provider for the security key.
How to set up automatically
Network Settings
1. In the Network Setup screen, press
Start. The Network Setup begins.
◀
2. Select Wireless(General) and then
Next.
2/6
Select a network connection type.
Wired
Wireless(General)
WPS(PBC)
One Foot Connection
Previous
Set up wireless network by
selecting your Access Point. You
depending on the setting of the
Access Point.
●● The displayed image may differ
depending on the model.
English
Next
may need to enter security key
Cancel
▶
3.The Network function searches for available wireless networks.
When done, it displays a list of the available networks.
4. In the list of networks, press the u or d button to select a
network, and then press the ENTERE button twice.
NN If the wireless router is set to Hidden (Invisible), you have to
select Add Network and enter the correct Network Name (SSID)
and Security key to establish the connection.
◀
5.If the Security Key screen appears, go to step 6. If you select a
wireless router that does not have security, go to step 7.
English
▶
6.If the Enter wireless router has
security, enter the Security key
(Security key or PIN).
Network Settings
4/6
Enter security key
7. If the input is complete, select
Next. Then the connections to the
wireless sharer and the Internet are
attempted.
0 entered
a
b
c
d
e
f
1
2
3
g
h
i
j
k
l
4
5
6
m
n
o
p
q
r
7
8
9
s
t
u
v
w
x
y
z
0
a/A
Delete
Previous
Next
Cancel
Space
●● The displayed image may differ
depending on the model.
NN Even if the TV has been connect-
◀
ed to the wireless router, it may not be connected to the Internet. In this case, check the Internet connection of the wireless
router.
8.When the connection is established, the "Internet is connected
successfully." message appears.
English
▶
■■ Manual Network Setup
Use the Manual Network Setup when connecting your TV to a network
that requires a Static IP address or if the automatic connection
process has failed.
Getting the Network Connection Values
To view the Network connection values on most Windows computers,
follow these steps:
◀
1. Right click the Network icon on the bottom right of the screen.
2. In the pop-up menu that appears, click Status.
3. On the dialog that appears, click the Support tab.
4. On the Support Tab, click the Details button. The Network
connection values are displayed.
English
▶
How to set up manually
1. Go to Network Settings screen, press Start. The network setup begins.
2. Select Wireless (General), and the Select
Next.
◀
3. The Network function searches for
available wireless networks. When
done, it displays a list of the available
networks.
4. In the list of networks, press the u or
d button to select a network, and then
press the ENTERE button.
IP Settings
IP Mode
Manual
IP Address
0.0.0.0
Subnet Mask
0.0.0.0
Gateway
0.0.0.0
DNS Mode
Manual
DNS Server
0.0.0.0
OK
● The displayed image may differ
depending on the model.
N If there is a particular wireless sharer
you are looking for, select the Search option again to search for
the wireless sharer. If the wireless sharer is not found after the
second search, select Add Network and then Next to manually add
the wireless sharer.
English
▶
5. If the Enter Security key screen appears, go to step 6. If you selected an
AP that does not have security, go to step 7.
6. If the wireless sharer is protected by a security key, enter the security
key (PIN).
7. If the input is complete, select Next. Then the connections to the wireless
sharer and the Internet are attempted.
8. While connecting to the network, select Cancel. The connection is
stopped.
◀
9. When the connection is stopped, select IP Settings. The IP Settings screen
appears.
English
▶
10. Set the IP Mode to Manual and enter the network information that you saw
on the computer.
–– DNS Mode is automatically changed if the IP Mode is changed.
11. If you have finished entering the information, select OK. Then the
connection to the network with the entered network information is reattempted.
12. When the connection is established, the "Internet is connected successfully."
message appears.
◀
▶
English
■■ WPS(PBC) Network Setup
How to set up using WPS(PBC)
If your router has a WPS(PBC) button, follow these steps:
1. In the Network Setup screen, press
Start. The Network Setup begins.
2. Select WPS(PBC) and press Next.
◀
3. Press the WPS(PBC) button on
your router within 2 minutes. Your
TV automatically acquires all the
network setting values it needs and
connects to your network.
Network Settings
2/6
Select a network connection type.
Wired
Wireless (General)
WPS(PBC)
One Foot Connection
Previous
Connect to the Access
Point easily by pressing the
if your Access Point supports
Push Button Configuration(PBC)
●● The displayed image may differ
depending on the model.
4. When the connection is established, the “Internet is connected
successfully.” message appears.
English
Next
WPS(PBC) button. Choose this
Cancel
▶
■■ One Foot Connection Network Setup
The One Foot Connection function lets you connect your Samsung TV
automatically to a Samsung wireless router. If your wireless router
does not support One Foot Connection, you must connect using one of
the other methods.
NN You can check for equipment that supports One Foot Connection on
www.samsung.com/sec.
◀
▶
English
How to set up using One Foot Connection
Turn the wireless sharer and the TV on.
1. In the Network Setup screen, press Start.
The Network Setup begins.
Network Settings
2/6
Select a network connection type.
Wired
2. Select the One Foot Connection function
and then Next.
◀
3. Place the wireless sharer 25 cm from
the TV or the Samsung wireless LAN
adapter and place them at the same
level
English
Wireless(General)
Previous
WPS(PBC)
Connect to the wireless network
One Foot Connection
Next
automatically if your access point
supports One Foot Connection.
Cancel
Select this connection type after
placing the Access Point within 10
inches (25cm) of your TV.
●● The displayed image may differ depending
on the model.
▶
4.Wait for the completion of the connection setup.
–– If the LAN cable of the wireless sharer is connected to the WAN
port, the connection to the wireless sharer and the Internet is
performed. If the LAN cable is not connected to the wireless
sharer, connecting to the sharer is performed.
5.When the connection is established, the "nternet is connected successfully."
message appears. Move the wireless sharer to your desired location.
◀
–– If the connection fails, initialize the wireless sharer, reconnect the
Samsung wireless LAN adapter and then restart the procedures
again from Step 1.
–– If you change the settings of the wireless sharer or install a new
wireless sharer, you have to configure the network again.
English
▶
■■ Plug & Access Network Setup
The Plug & Access function lets you easily connect your Samsung
TV to your Samsung wireless router by using a USB memory stick to
transfer the setup information from the router to the TV. If your nonSamsung AP does not support Plug & Access, you must connect
using one of the other methods.
NN You can check for equipment that supports Plug & Access on
www.samsung.com/sec.
◀
▶
English
How to set up using the Plug & Access function
Turn on the Samsung wireless router and your TV.
1. Insert a USB memory stick into the USB port in your Samsung
wireless router. Check the router's LED's to make sure it is on
(Blinking → on).
◀
2. Take the USB memory stick out of the router, and then insert it
into a USB port on your Samsung TV. The memory stick downloads
the connection information.
3. Wait until the connection is automatically established.
4. When the connection is established, the "Internet is connected
successfully." message appears.
–– If the connection fails, initialize the wireless sharer and then try
again from Step 1.
–– If you change the settings of the wireless sharer or install a
new wireless sharer, you have to configure the network again.
English
▶
Priority QOS
Samsung wireless routers are optimized to stream HD AV to Samsung DTVs.
This Priority QOS function is unique to Samsung wireless routers. You can
connect a Samsung wireless router to many devices, such as laptops,
mobile phones, BD players etc. But, when you connect a Samsung TV
to a Samsung wireless router, the Samsung wireless router gives the
Samsung TV a priority connection. This ensures you get the highest
quality streaming contents and the fastest throughput speed.
◀
●● Priority QOS makes your TV faster by giving it priority bandwidth.
(Priority QOS is optional. You can turn it on and off.)
●● Because your Samsung TV has a priority connection, you can enjoy
HD content without buffering.
●● The connection speed may vary based on the network
environment.
English
▶
■■ Ad hoc Network Setup (Ad hoc)
You can only connect the device when the device supports an Ad hoc
connection.
NN The functions that use a network connection may be restricted in
this connection mode.
How to set up using Ad hoc
◀
1. In the Network Setup screen, press Start. The Network Setup
begins.
2. Select Wireless(General) and then Next.
3. Select Ad hoc. The message "Ad hoc service supports a direct
connection with Wi-Fi compatible devices like a cell phone or PC. Other
network services may be limited. Do you want to change the network
connection?" is displayed.
English
▶
4.Select OK, The Network Name (SSID) and the security key appears.
5. Select OK. and find the Network Name (SSID) that is displayed on
the TV on the device to be connected and then set the security
key displayed on the TV for the device. After that, make a
connection.
NN If network does not operate normally, check the Network Name
(SSID) and Security key again. An incorrect Security key may
cause a malfunction.
◀
NN If a device is connected once, it is displayed in the Network
Setting list. When you connect to it again, you can find it in the
List.
English
▶
If Your TV Fails to Connect to the Internet
Your TV may not be able to connect to the Internet because your ISP has permanently registered the MAC address (a unique identifying number) of your PC or modem, which it then
authenticates each time you connect to the Internet as a way of preventing unauthorized
access. As your TV has a different MAC address, your ISP can not authenticate its MAC address, and your TV can not connect.
To resolve this problem, ask your ISP about the procedures required to connect devices
other than a PC (such as your TV) to the Internet.
◀
If your Internet service provider requires an ID or password to connect to the Internet, your
TV may not be able to connect to the Internet. If this is the case, you must enter your ID or
password when connecting to the Internet.
The internet connection may fail because of a firewall problem. If this is the case, contact
your Internet service provider.
If you cannot connect to the Internet even after you have followed the procedures of your
Internet service provider, please contact Samsung Electronics at 1-800-SAMSUNG.
English
▶
❑❑ Setting the Time
OO 메뉴m → System → Time → ENTERE
■■ Time
●● Clock: Set the clock to use the various timer features of the TV.
NN The current time will appear every time you press the 정보표시
button.
◀
NN If you disconnect the power cord, you have to set the clock
again.
–– Clock Mode (Auto / Manual)
Auto: Have the TV set the current time automatically using the
time from a digital channel.
NN You must have the cable or an antenna connected to the TV
to set the time automatically.
English
▶
Manual: Set the current time manually.
–– Clock Set: Set the current date and time.
NN Available only when Clock Mode is set to Manual.
Using the Sleep Timer
OO 메뉴m → System → Time → Sleep Timer → ENTERE
●● Sleep Timer
◀
: Automatically shuts off the TV after a preset
period of time. (30, 60, 90, 120, 150 and 180 minutes).
간편메뉴T
NN To cancel Sleep Timer, select Off.
English
▶
Setting the On / Off Timer
O 메뉴m → System → Time → ENTERE
● On Timer: You can set up three
On Timer 1
separate On Timer configurations. You
must set the clock first.
◀
Setup: Select Off, Once, Everyday,
Mon~Fri, Mon~Sat, Sat~Sun or Manual.
If you select Manual, you can choose
the days you want On Timer to turn on
your TV.
N The c mark indicates days you've
selected.
English
Setup
Off
Sun
Mon
Tur
Wed
The
Time
Fri
Sat
12:00 am
Volume
20
Source
TV
Antenna
Cable
Channel
3
Close
● The displayed image may differ
depending on the model.
▶
Time: Specify the time to turn the TV on.
Volume: Set the desired volume level. Use the left and right arrow
buttons to change the volume level.
Source: Sets the input source to TV or USB when it is turned on
by the On Timer.
NN You can only select USB when a USB device is connected to
the TV.
◀
Antenna (when the Source is set to TV): Select Air or Cable.
Channel (when the Source is set to TV): Select the desired channel.
Music / Photo (when the Source is set to USB): Select a folder in
the USB device containing music or photo files you want played
when the TV turns on automatically.
NN You can only use this function when a USB device is connected.
English
▶
NN NOTE
●● If there is no music file on the USB device or you don't
select a folder containing a music file, the Timer function
does not operate correctly.
●● If there is only one photo file in the USB, the Slide Show will
not play.
●● If a folder name is too long, the folder cannot be selected.
◀
Each USB you use is assigned its own folder. When using
more than one of the same type of USB, make sure the
folders assigned to each USB have different names.
●● We recommend that you use a USB memory stick and a
multi card reader when using On Timer. The On Timer function
may not work with USB devices with a built-in battery, MP3
players, or PMPs made by some manufacturers because the
TV can take too long to recognize these devices.
English
▶
● Off Timer: You can configure the On
Off Timer 1
Timer in three ways. Set the current
time first to use this function.
Setup: Select Off, Once, Everyday,
Mon~Fri, Mon~Sat, Sat~Sun or Manual.
If you select Manual, you can choose
the days you want Off Timer to turn off
your TV.
◀
Setup
Sun
English
Sun
Tur
Wed
Thu
Time
Fri
Sat
12:00 am
Close
● The displayed image may differ
depending on the model.
N The c mark indicates days you've selected.
Time: Specify the time to turn the TV off.
Off
▶
❑❑ Blocking Programs
OO 메뉴m → System → Security → ENTERE
■■ Security
The PIN input screen appears. Enter the 4 digit PIN.
●● Channel Lock (Off / On): When turned on, the Channel Lock feature
can automatically block programs that you deem inappropriate for
your children.
◀
▶
NN Available in TV mode only.
NN The default PIN number for a new TV set is “0-0-0-0”.
English
Using Channel Lock
1. Press the 스마트허브 button and select Channel.
2. Select a channel to be locked from the channel list and press the
간편메뉴 button.
3.Select Lock. The PIN input window appears.
4.Enter the 4 digit PIN. The Channel Lock function is set.
NN To select and lock multiple channels, go to Channel > Edit.
◀
●● You can change the PIN. Enter a 4-digit PIN and then re-enter the
PIN. The PIN is set to the new PIN.
English
▶
●● Change password: You can change the PIN. Enter a 4-digit PIN and
then re-enter the PIN. The PIN is set to the new PIN.
How to watch a restricted program or movie
If you try to watch a locked channel, a blank screen appears and the
"The channel is locked." message appears.
1. Press the 스마트허브 button and select Channel.
◀
2. In the corresponding channel, press the 간편메뉴 button and select
Unlock.
3.The PIN input window appears. Please enter the PIN to unblock.
4.If you enter the correct PIN, the channel is unlocked.
NN If you forget the PIN, press the remote-control buttons in the
following sequence, which resets the pin to "0-0-0-0:" 전원 (off)
→ 조용히 → 8 → 2 → 4 → 전원 (on)
English
▶
❑❑ Economical Solutions
■■ Eco Solution
OO 메뉴m → System → Eco Solution → ENTERE
●● Energy Saving (Off / Low / Medium / High / Picture Off): Lets you
◀
adjusts the brightness of the TV in order to reduce power
consumption. If you select Picture Off, the screen is turned off, but
the sound remains on. Press any button except the volume button
to turn on the screen.
●● No Signal Power Off (Off / 15 min. / 30 min. / 60 min.): To avoid
unnecessary energy consumption, you can set how long you want
the TV to remain on if it's not receiving a signal.
NN Disabled when an attached PC is in power saving mode.
●● Auto Power Off (Off / On): Saves power by turning TV off
automatically when no user operation is received for 4 hours.
English
▶
❑❑ Picture In Picture (PIP)
OO 메뉴m → System → PIP → ENTERE
■■ PIP
간편메뉴T
NN Using PIP, you can watch a program whose signal passes through the TV's
◀
tuner and video from one external video source simultaneously. For example,
if you have a cable box connected to the Cable In jack (whose signal passes
throught the tuner) and a Blu-ray player connected to the HDMI In jack, you
can use PIP to watch a program from the cable box and a movie from the
Blu-ray player.
NN NOTE
●● For PIP sound, refer to the Sound Select instructions.
●● If you turn the TV off while watching in the PIP mode, the PIP
function is reset to off. When you turn your TV on, you must
turn PIP on again to watch in the PIP mode.
English
▶
●● You may notice that the picture in the PIP window becomes
slightly unnatural when you use the Main to view a game or
karaoke.
●● The PIP function is not available when Smart Hub is running.
●● The PIP function is not available in 3D mode.
●● PIP Settings
◀
Main
Sub
Component, HDMI1/DVI, HDMI2
TV
English
▶
●● PIP (Off / On): Activate or deactivate the PIP function.
●● Channel: Select the channel for the Sub.
●● Size (õ / ã / à / Œ): Select a size for the Sub.
●● Position (ã / – / — / œ): Select a position for the Sub.
NN In Double (à, Œ) mode, you cannot select Position.
●● Sound Select (Main / Sub): You can choose to listen to the sound
from the Main picture or the Sub picture.
◀
▶
English
❑❑ Other Features
OO 메뉴m → System → ENTERE
■■ Menu Language
Set the menu language.
1. Select Menu Language, and then press the ENTERE button.
2. Choose a language, and then press the ENTERE button.
◀
NN Choose from 한국어, and English.
English
▶
■■ Caption
You can show or hide captions. If no captions are provided, no
captions will be displayed regardless of the caption setting.
●● Caption (Off / On): You can switch the caption function on or off.
If captions are not available, they will not be displayed on the
screen.
NN The Caption feature does not work with devices connected to
◀
the TV through the Component, HDMI or PC input jacks.
●● Caption Mode: You can select a caption mode from the list. If
the selected captions are not provided, the captions will not be
displayed.
NN If no captions are provided, no captions will be displayed.
Default / English / Korean: (analog channels only) You can select
Default, English or Korean. The Default is Korean captions.
English
▶
NN If the broadcasting station or video content does not provide
caption data, no captions will be displayed even when you select captions.
NN When you watch a DVD title, captions are only displayed when
the DVD player is connected to the AV jack.
NN If you watch a program with English captions in Korean caption
mode, the displayed caption characters may be broken. In this
case, set the caption mode to English.
◀
NN If you connect an external device (cable / satellite / digital
broadcast receiver) to the HDMI or Component jack, captions
are not supported.
Default / Service 1~6: (For digital broadcasts) You can select
Service 1 to Service 6. Since, only Service 1 is supported by
broadcasts in Korea, set it to Default or Service 1.
English
▶
●● Caption Options: You can configure the size and color of the captions.
Configure the following options and select Close. To reset the option to
the default of the broadcast, select Default at the bottom of the screen.
Size: Options include Default, Small, Standard and Large. The default is
Standard.
NN When you watch an analog broadcast, you cannot change the Size.
◀
▶
English
Font Style: Options include Default and Styles 0 to 7. The default is Style
0.
Foreground Color: You can change the color of the letters. Options
include Default, White, Black, Red, Green, Blue, Yellow, Magenta and
Cyan. The default is White.
Background Color: You can change the background color of the
caption.Options include Default, White, Black, Red, Green, Blue, Yellow,
◀
Magenta and Cyan. The default is Black.
Foreground Opacity: This adjusts the opacity of text. Options include
Default, Transparent, Translucent, and Solid.
Background Opacity: This adjusts the opacity of the caption
background. Options include Default, Transparent, Translucent, and
Solid.
English
▶
NN NOTE
●● The availability of captions depends on the program being
broadcasted.
●● The Default setting follows the standards set by the
broadcaster.
●● You cannot set the Foreground and Background to the same
color.
◀
●● You cannot set both the Foreground Opacity and the
Background Opacity to the same color.
English
▶
■■ Auto Protection Time (Off / 2 hours / 4 hours / 8 hours / 10 hours)
OO 메뉴m → System → Auto Protection Time → ENTERE
If the picture is still for the specified period of time configured in
the Auto Protection Time, the screen protection function will be
activated.
◀
▶
English
■■ General
●● Max. Power Saving (Off / On): Conserve power by turning the monitor
off when the PC is not used for a specified period.
NN Available only HDMI1/DVI mode(when a PC is connected).
●● Game Mode (Off / On): When you have connected a game console such as
a PlayStation™ or Xbox™ to the TV, you can enjoy a more realistic gaming
experience if you set Game Mode on.
◀
NN Precautions and limitations for Game Mode:
–– Before disconnecting a game console and connecting another
external device, set Game Mode to Off in the System menu.
NN Game Mode is not available in TV mode or HDMI1/DVI mode (when
a PC is connected).
NN If you connect another external device to the jack where the
game console was connected, and the picture quality is not
good, set Game Mode to Off.
English
▶
●● BD Wise (Off / On): If you connect a Samsung DVD, Blu-ray player
or home theater that supports the BD wise function, you can even
enjoy DVD titles that have insufficient color depth, with a rich color
depth and high quality like a Blu-ray disc title.
NN Connect a product that supports BD Wise to the HDMI jack.
NN Only when an external device that supports the BD Wise
function is connected, is BD Wise enabled.
◀
●● Boot Logo (Off / On): Displays the Samsung logo when the TV is
turned on.
●● TV Name: Sets the TV name so you can find it easily on a mobile
device.
NN If you select User Input, you can type on the TV using the OSK
(On Screen Keyboard).
English
▶
■■ Anynet+(HDMI-CEC)
For details on set up options, refer to the "Anynet+(HDMI-CEC)"
instructions.
◀
▶
English
■■ DivX® Video On Demand
Shows the registration code authorized for the TV. If you connect to
the DivX web site and register using that code, you can download
the VOD registration file. If you activate the VOD registration using My
Contents, the registration is completed.
NN For more information about DivX® VOD, visit "http://vod.divx.com".
◀
▶
English
■■ Network Remote Control (On / Off)
Turn on/off or give permission to Samsung mobile phone devices to
connect with and control the TV.
You must have a Samsung Mobile phone/device which supports
Wireless Remote Control. For more details, refer to each device's
manual.
◀
▶
English
❑❑ Support Menu
OO 메뉴m → Support → ENTERE
■■ e-Manual
The e-Manual is built into your TV. Open the e-Manual to learn how
to use your TV's many features.
NN For the detailed information about the e-Manual Screen, refer to
◀
"How to view the e-Manual" in the Users Manual.
English
▶
■■ Self Diagnosis
If there is a problem on the screen or with the sound, you can check
if the TV video and audio signals are output normally.
●● Picture Test: Use to check for picture problems. Picture test displays
a high definition picture that you can examine for flaws or faults.
◀
▶
English
●● Sound Test: Use the built-in melody to check for sound problems.
NN NOTE
●● If the test video or audio is normal, it may indicate a problem
with the broadcast signal, the connection with the external
device or the operation.
●● If the problem continues, check the broadcast signal and
refer to the user manual of the external device.
◀
●● If the problem continues in the test video or audio, contact
a Samsung service center and give the consultant the TV
information on the screen.
English
▶
●● Signal Information: (digital channels only) You can view the
information about the current digital broadcast signal.
●● Troubleshooting: Provides procedures to troubleshoot the problems
that may occur on the TV.
NN If none of these troubleshooting tips apply, contact the Samsung
customer service centre.
◀
▶
English
■■ Software Upgrade
You can perform a Software Upgrade over the network or by
downloading the latest firmware to a USB device and connecting the
USB device to the TV.
◀
▶
English
Installing the Latest Version
●● By USB: Insert a USB device
TV Rear Panel
containing the firmware upgrade
file that was downloaded from
"www.Samsung.com/sec" into the TV.
●● Please be careful not to disconnect
the power or remove the USB drive
until upgrades are complete.
◀
USB
●● The displayed image may differ
depending on the model.
●● The TV will be turned off and on automatically after completing the
firmware upgrade.
●● After the firmware upgrade, the picture and sound settings are
initialized. We advise you to to write down your settings so that
you can easily reset them after the upgrade.
English
▶
●● By Online: You can download the firmware file over the Internet and
upgrade the firmware.
NN First, configure your network. For more information on config-
uring the network, refer to the descriptions in "Wired / Wireless
Network Connection".
NN If the internet connection does not operate properly, the con-
◀
nection may be broken. Please retry downloading. If the problem persists, download the file to a USB device and perform the
upgrade from the USB device.
●● By Channel: You can upgrade the firmware by downloading the
latest version over the broadcast signal.
●● Alternative Software (Backup): Shows the version of the firmware that
has been upgraded over the Internet. You can use this function
when you aborted the upgrade before it is complete.
English
▶
●● Standby Mode Upgrade (Off / 45 min. / 06:00 / 10:00 / 02:00 /
04:00): You can download the latest version firmware over the
broadcast signal when the TV is in standby mode.
◀
▶
English
■■ Contact Samsung
View this information when your TV does not work properly or when
you want to upgrade the software. You can find information regarding
our call centers and how to download products and software.
◀
▶
English
Advanced Features
❑❑ Using the 3D function
OO 메뉴m → Picture → 3D →선택E
■■ 3D
This feature allows you to view 3D content such as 3D broadcasts
or movies. You can view 3D content using (SyncMaster-dedicated)
Samsung 3D glasses.
◀
NN You can purchase SyncMaster-dedicated 3D glasses (model name:
SSG-M3750CR) separately. Contact the dealer you purchased the
product from for details about purchasing the 3D glasses.
NN The product may not be compatible with 3D glasses other than the
model specified above.
NN Power off the 3D glasses when not in use. Otherwise, the battery
lifespan will decrease.
English
▶
IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES.
Read and understand the following safety information before using the TV's
3D function.
[[ WARNING
●● Some viewers may experience dizziness, nausea, or headache
when viewing 3D video. If this occurs, stop viewing 3D TV
immediately, take off the 3D glasses, and rest.
◀
●● Watching 3D video for an extended period of time may
cause eye fatigue. If eye fatigue occurs, stop viewing 3D TV
immediately, take off the 3D glasses, and rest.
English
▶
●● Children need to be checked frequently by adults when using
the 3D function. If your child shows any symptom such as eye
fatigue, headache, dizziness, or nausea, have the child stop
watching 3D TV immediately and rest.
●● Do not use the 3D Active Glasses for other purposes (such as
general eyeglasses, sunglasses, protective goggles, etc.)
●● Do not use the 3D function or 3D glasses while moving. You
◀
may trip or fall and become injured.
English
▶
●● 3D Mode: Select the 3D input format.
NN Put on the 3D glasses, and select a 3D mode that offers the
best 3D effect from the following 3D modes under 3D Mode.
3D Mode
3D
◀
Functions
Off
Turns the 3D function off.
2D → 3D
Changes a 2D image to 3D.
Left & Right
Displays the left and right images overlapping each
other to allow you to experience the 3D effect.
Top & Bottom
Displays the top and bottom images overlapping each
other to allow you to experience the 3D effect.
NN Some file formats may not support "2D → 3D."
NN The
and
modes are only available when a PC is connected
via the HDMI 입력 1 (DVI) port or when the resolution of the content
from a DTV broadcast, a source device connected via the HDMI
port, or a USB storage device connected is 720p, 1080i or 1080p.
English
▶
●● 3D Perspective (-5 ~ +5): Adjust overall 3D perspective of on-
screen image.
●● Depth (1~10): Adjust overall depth.
●● L/R Change (L/R Image / R/L Image): Swap the left and right pictures.
●● 3D → 2D (Off / On): Displays the image for the left eye only.
NN This function is deactivated when 3D Mode set to “
◀
” or “
Supported Resolutions in HDMI PC Mode
HDMI PC Mode is optimized to 1920 x 1080 input. If the resolution is
not 1920 x 1080, the 3D picture is not properly displayed and you
cannot watch the 3D picture in full screen.
English
3D
”.
▶
Watching 3D Video
You may not use 3D Mode depending on the format of the input video.
NN Turn the 3D glasses on and watch 3D video.
1. Press the 메뉴 button, select a screen
using the u or d button and press the
Select ENTERE button.
◀
2. Use the u or d button to select 3D, and
then press the ENTERE button.
3D
3D Mode
3D Perspective
0
Depth
5
L/R ChangeL/R Image
3D → 2D
●● The displayed image may differ
depending on the model.
English
3D
Off
▶
3.Use the u or d button to select 3D
mode, and then press the ENTERE
button.
4.Select a mode from among the
supported 3D modes using the
l or r button.
3D mode
Close
●● The displayed image may differ
depending on the model.
◀
▶
English
Standard HDMI-compatible formats
NN The 3D formats listed below are recommended by the HDMI association
and must be supported by 3D TVs.
Source signal format
Standard HDMI 3D
1920x1080p@24Hz
1920x2205p@24Hz
1280x720p@60Hz
1280x1470p@60Hz
NN For the Standard HDMI 3D format with 24Hz, the TV is optimized
◀
as follows:
–– To optimize the resolution of a video: Select Off, Clear, or Standard
in Auto Motion Plus mode.
–– To view a natural video without shaking: Select Smooth or configure
Custom in Auto Motion Plus mode.
English
▶
Resolution compatible with PC input (connected via the HDMI IN 1 (DVI) port)
PC input is optimized for video in 1920 x 1080 resolution. Videos with
a resolution other than 1920 x 1080 will not be viewable in 3D or full
screen mode.
Playing a 3D Game on a PC
First, install the SyncMaster 3D Game Launcher(TriDef 3D) software.
◀
NN SyncMaster 3D Game Launcher(TriDef 3D) is a game driver that allows you
to play PC games in 3D.
1. Set your monitor as the default monitor for the PC.
2. Install the SyncMaster 3D Game Launcher(TriDef 3D) software provided
on a CD.
–– Follow the instructions displayed on the screen.
–– You can also download the program from www.tridef.com/
syncmaster and install it.
English
▶
3.Select Start -> All Programs -> TriDef 3D, and run SyncMaster 3D Game
Launcher(TriDef 3D).
4.Press the "Search" button. Compatible games will be added to
SyncMaster 3D Game Launcher(TriDef 3D). You can also add games
using the following methods.
–– Drag the icon or execution file of a game on the desktop into
the SyncMaster 3D Game Launcher(TriDef 3D) window.
◀
–– Go to "File" and select "Add Games…"
5.To play a game in 3D mode, double-click the game icon or select the game
and click "Start."
English
▶
6.Play the game wearing 3D glasses.
NN Activate the 3D function on the product, and enjoy the game
wearing the 3D Active Glasses.
NN Refer to "Online Help" for PC system requirements and details about how
to use SyncMaster 3D Game Launcher(TriDef 3D).
NN If you start a game from the desktop and not from SyncMaster
◀
3D Game Launcher(TriDef 3D), the game will not be displayed in
3D.
NN A game whose system requirements exceed the PC cannot be
started.
English
▶
NN The minimum PC system requirements may vary depending on
the 3D game. For details, refer to the home page or user guide
for the 3D game you want to play.
NN SyncMaster 3D Game Launcher(TriDef 3D) does not support PCs
that are based on Macintosh or Linux operating systems.
NN Further Information
–– For further details about TriDef 3D Games for SyncMaster(TriDef
◀
3D), contact DDD USA Inc. (www.tridef.com).
–– For further details about the product, contact Samsung
Electronics.
TriDef® 3D and all related indicia are trademarks of DDD Group PLC.
ⓒ 2010. All Rights Reserved.
English
▶
Precautions when viewing 3D video
–– The 3D effect may be experienced differently depending on the
viewer. You may not notice the 3D effect at all if you have a
prescription for one eye that is very different from the other eye.
–– When viewing a 3D video under a fluorescent lamp or
3-wavelength lamp, you may notice a small amount of screen
flickering.
◀
–– Interference may cause the 3D glasses to malfunction if there is
any other 3D product or electromagnetic device (a microwave or a
device that uses 2.4 Ghz-bandwidth frequency such as an Internet
router) turned on nearby. Even if the 3D function not works
properly, it is best to remove other electromagnetic devices or
wireless communications devices nearby.
English
▶
–– Visually-sensitive viewers may notice a slight screen flickering
when viewing bright images in 50 Hz 3D video.
–– As the TV turns on, the left and right sides of 3D pictures may
overlap more than usual. It may take time until the picture quality
is optimized.
–– 3D Mode is set to Off automatically when the input source is
changed or when you access Smart Hub or e-Manual functions.
◀
–– PIP is not supported in 3D mode.
–– Some Picture functions are disabled in 3D mode.
English
▶
❑❑ Getting Started with Smart Hub
Functions (Depending on the model)
◀
Search All
Social TV
You can more easily
search various sources
(e.g. Apps, AllShare) and
access the contents.
You can share your TV
viewing experience with
your friends through the
social network service.
Your Video
▶
You can enjoy movies
through the custom VOD
recommendation service.
* This function is
restricted to specific
areas
English
❑❑ Smart Hub
Using Smart Hub, you can stream movies,
videos, and music from the Internet,
access various for pay or free-of-charge
applications and view them on your TV.
Application content includes news, sports,
weather forecasts, stock market quotes,
maps, photos, and games.
◀
English
Search
Recommended
Favorites
Music
Channel
Schedule Ma...
Guide
Source
Recorded TV
Videos
Photos
AllShare
a Login
b Sort by
{ Edit Mode
} Settings
●● The displayed image may differ depending on
the model.
▶
Smart Hub at a Glance
You can search for
various types of
content that can be
used on your TV.
Enter a keyword to
search for media,
various applications, or
online information that
you can use on the
TV.
◀
TV Screen: Displays
the current input
source screen..
Exit: Exits the SMART HUB.
Search
Samsung Apps : You can
download various for
pay or free-of-charge
application services.
Recommended
Favorites
Music
Channel
Schedule Ma...
Guide
Source
Recorded TV
Videos
Photos
AllShare
a Login
Information: Displays
notices, new
applications, and
advertisements brought
to you by Samsung
product introductions.
b Sort by
{ Edit Mode
} Settings
Recommended : Displays
recommended contents
managed by Samsung.
My Applications: Displays
your personal gallery of
applications which you
can add to, modify, and
delete.
Controls:
●● a Red (Login / Logout): To log in to Smart Hub.
●● b Green (Sort by): To sort the applications.
●● { Yellow (Edit Mode): To edit the applications.
●● } Blue (Settings): To change the settings of Smart
Hub.
NN The colored buttons may work differently depending
on the application.
English
▶
NN NOTE
●● Samsung Electronics takes no legal responsibility for any
interruption of the Smart Hub service caused by the service
provider for any reason.
●● The Smart Hub service downloads and processes data via the
◀
Internet so that you can enjoy the Internet contents on your TV
screen. If the Internet connection is unstable, the service may
be delayed or interrupted. Furthermore, the player may turn off
automatically in response to conditions on the Internet. If this
occurs, check the Internet connection and try again.
●● Application services may be provided in English only and the
contents available may vary, depending on your area.
English
▶
●● For more information about a Smart Hub service, visit the web site
of the applicable service provider.
●● The services provided are subject to change by the Smart Hub
service provider without notice.
●● The Smart Hub service contents may differ depending on the
player's firmware version.
●● For pay DivX contents with copy protection can only be played
◀
through a composite, a component or an HDMI cable.
English
▶
Account Login
If you select ^ instead of directly entering
the Smart TV ID, you can select an ID from
the previously logged-in ID list.
NN If you have a Smart TV ID, you can use the Smart Hub more conve-
niently.
NN For more information on creating an account, refer to "How to create a
◀
▶
Smart Hub ID".
English
1. On the Smart Hub home page, press the a button.
2. Move the pointer over the Smart TV ID and press the Select button.
You can directly enter an account ID through the keypad OSD.
If you have attempted to login before, select ^. The previously
logged-in IDs are listed.
NN If you do not have an account, select Create Account. The Create
Account screen appears.
◀
3.Enter a user account and press the ENTERE button.
4.Enter the password in the same manner. When you finish, select
Login.
NN When the login has been completed successfully, the user account
appears at the bottom left of the screen.
Select Remember my Smart TV ID and password. before logging in to
make it easier to log in later.
English
▶
How to create a Smart Hub ID
1. Press the a button. The login screen will appear.
2. Select Create Account. The Create Account screen appears.
3.To enter the Smart Hub ID, press the ENTERE button. The Keypad
screen appears.
4.Enter the Smart Hub ID using the keypad OSD.
NN You have to create a Smart Hub ID in the format of "sample@sam-
◀
▶
ple.com".
English
Using the Keypad
Pressing the - button on the remote while you are using the Screen
Keypad enables you to change the text fields to lower case, upper
case, numbers and icons.
In various Smart Hub services, you can use the keypad OSD.
4-1. For example, suppose that you want to input "105Chang".
4-2. Press the - button 3 times to switch the input mode.
◀
4-3. Press the 1, 0 and 5 buttons in sequence.
English
▶
4-4. Press the - button on the remote 4 times to change the input
mode from numbers to upper case.
4-5. Press the 2 button 3 times to enter "C".
4-6. Press the - button 4 times to change the input mode from
upper case to lower case.
4-7. Enter the remaining characters of "Chang". When done, press
the ENTERE button.
◀
▶
English
5.Enter the password. When the input is complete, enter the same
password again.
●● The password should be between 6~12 characters.
●● You can delete entered characters using the 이전 채널 button.
●● π (REW) or µ (FF) button, you can select icon you want to enter
in icon keypad screen.
◀
6.If the input is complete, select Create Account. The account is created.
If you already have an account for the downloaded service, and you
register the user account with the service site, you can automatically
login when the Smart Hub is launched. Select Go Register.
NN To register the service later, select Register Later.
English
▶
7. Select a service for which you have an account and press the
ENTERE button.
8.Enter the account and password of the service. When the input is
complete, press OK.
9.The registration is completed. To register another service, select a
service from the list and enter the account and password for the
service.
◀
10.When you finish the procedure, press OK.
English
▶
■■ Sort by
The functions in the Sort Menu let you sort the applications in My
Applications by Name, Date, Frequency (of use), and Category. If you
manually change the position of an application, the Sort menu is set
to User Defined automatically.
To sort the applications in My Applications, follow these steps:
1. Press the b button on your remote.
◀
2. Press the l / r to select a sorting method, and then press the
ENTERE button. Smart Hub sorts the applications by the method
you have chosen.
English
▶
■■ Edit Mode
The functions in the Edit Mode menu let you manipulate the
applications in the My Applications section of the Smart Hub screen.
Using these functions, you can lock and unlock access to some
applications, create folders and move applications to them, rename
folders, delete applications, and change the position of applications
on the screen. To access the Edit Mode Menu, and then select a
menu item, follow these steps:
◀
1. Press the { button on your remote. The Edit Mode menu bar
appears on the bottom of the screen.
2. Press the u / d / l / r to select a menu item, and then press
the ENTERE button.
English
▶
The functions in the Edit Mode Menu bar are described below.
NN NOTE
●● Some menu items may not appear on the screen. To see these
items, press the l / r to move to the screen edge, and then
press one more time to reveal the items.
●● You can close the bar by highlighting the X on the bottom right
side, and then pressing the ENTERE button.
◀
▶
English
●● Move
The Move function lets you change the screen position of an
application. To use the Move function, follow these steps:
1. Press the { button on your remote.
2. Select an application, and then press the ENTERE button.
A c appears above the application.
◀
3.Press the u / d / l / r to select Move, and then press the
ENTERE button. A position change icon appears above the
application.
4.Press the u / d / l / r to move the icon. Press the ENTERE
button when the icon is in the position of your choice. The
application moves to its new location.
English
▶
●● Move to Folder
The Move to Folder function lets you move an application to a
folder. To use the Move to Folder function, follow these steps:
1. Press the { button on your remote.
2. Select an application, and then press the ENTERE button.
3.Press the u / d / l / r to select Move to Folder, and then
press the ENTERE button. The Move to Folder screen opens.
◀
4.Press the u / d / l / r to select a folder, and then press the
ENTERE button. The Moved to Folder message appears, and
then closes. The application has been moved to the folder.
English
▶
To access an application in a Folder
1. Close the Edit Mode menu.
2. In My Applications, press the u / d / l / r to select a folder,
and then press the ENTERE button. The folder opens.
3.Select an application, and then press the ENTERE button. The
application service starts.
To Edit Items in a Folder
◀
Select a folder, and then press the ENTERE button. The folder
opens. Press the { button on your remote. The Edit buttons appear
at the bottom of the screen.
English
▶
These buttons work the same as the Edit Mode menu buttons on the
main screen. For example, to move an application back to the My
Apps main screen:
1. Select the application.
2. Select Move to Folder, and then press the ENTERE button. The
Move to Folder screen appears.
◀
3.Select My Apps, and then press the ENTERE button. The Move
to Folder screen closes and the application returns to the main My
Applications screen.
English
▶
●● New Folder
The New Folder function lets you create and name new folders.
Once you have created a folder, you can move applications into it.
To use the New Folder function, follow these steps:
1. Press the { button on your remote.
◀
2. Press the u / d / l / r to move the cursor to New Folder, and
then press the ENTERE button. The New Folder screen and a
keypad appear.
3.Use the keypad to enter the name of the folder.
4.Press the ENTERE button. The New Folder screen closes and
the New Folder appears on the Smart Hub screen.
English
▶
●● Rename Folder
The Rename Folder function lets you rename folders. To use the
Rename Folder function, follow these steps:
1. Press the { button on your remote.
2. Press the u / d / l / r to select a folder, and then press the
ENTERE button.
◀
3.Press the u / d / l / r to select Rename Folder, and then
press the ENTERE button. The Rename Folder screen and a
keyboard appears.
4.Use the key board to enter a new name.
5.Press the ENTERE button. The Rename window closes and the
new name appears below the folder.
English
▶
●● Lock
The Lock function lets you lock some application in My Applications
so they can not be opened without entering the password.
To use the Lock function, follow these steps:
1. Press the { button on your remote.
2. Press the u / d / l / r to select an application, and then
press the ENTERE button.
◀
3.Press the u / d / l / r to select Lock, and then press the
ENTERE button. The Lock Service screen appears.
4.Enter your password. If you do not changed a password, enter
“0-0-0-0”.
5.Press the ENTERE button. A confirming message screen appears. A
lock symbol appears next to the application.
English
▶
●● Unlock
1. Press the { button on your remote.
2. Press the u / d / l / r to select a locked application, and
then press the ENTERE button.
3.Press the u / d / l / r to select Unlock, and then press the
ENTERE button. The Lock Service screen appears.
◀
4.Enter your password. If you have not changed a password, enter
“0-0-0-0”.
5.Press the ENTERE button. A confirming message screen appears. A
lock symbol disappears next to the application.
English
▶
●● Delete
The Delete function lets you delete application from My
Applications. To use the Delete function, follow these steps:
1. Press the { button on your remote.
2. Press the u / d / l / r to select an application, and then
press the ENTERE button.
◀
3.Press the u / d / l / r to select Delete, and then press the ENTERE
button. The message, “Do you want to delete selected item(s)?”
appears.
4.Select Yes, and then press the ENTERE button. The application is
deleted.
English
▶
❑ Configuring the Smart Hub
■ Settings
You can edit and configure the Smart
Hub and downloaded service settings
Account Management
Service Manager
● Account Management
◀
Settings
Reset
Register Service Account: Register login
information for service sites.
Change Your Password: Changes the
account password.
Properties
Close
● The displayed image may differ
depending on the model.
Remove account from the list: Delete an
account from the list of accounts.
Withdrawal: Withdraw membership from Smart Hub.
English
▶
●● Service Manager
Ticker Autorun: If you set the Ticker Autorun option to On, the ticker
is automatically run when the TV is turned on.
Ticker services refers to a function that shows the latest information
such as stock news, the weather and the news in real-time on the
TV screen. If the service runs, you can view the information you
are interested in while watching TV.
◀
An application that provides the ticker service must be previously
installed. The Yunhap news ticker is installed on this product by
default.
Channel Bound Service (Off / On): You can use this service when
you watch a channel that supports the Internet data service.
NN This is only available if supported by the broadcasting station.
English
▶
●● Reset: Resets the Smart Hub settings. If you want reset Smart Hub,
Enter password.
NN The default password set is “0-0-0-0.”
NN If you forget the password you created, press the following sequence of
remote control buttons to reset the password to “0-0-0-0”: 전원 (Off) →
조용히 → 8 → 2 → 4 → 전원 (On).
◀
▶
English
●● Properties
Detail: Shows the Smart Hub information.
Smart Hub Service User Agreement: Shows the user agreement on
the Internet TV service.
◀
▶
English
❑❑ Using Smart Hub
Enjoy photos, music and/or movie files
saved on a USB Mass Storage Class
(MSC) device and/or your PC.
1. Press the 스마트허브 button.
◀
Search
Recommended
Favorites
2. Press the l / r / u / d button to
select Recorded TV, Videos, Photos, or
Music, and then press the ENTERE
button.
English
Music
Channel
Schedule Ma...
Guide
Source
Recorded TV
Videos
Photos
AllShare
a Login
b Sort by
{ Edit Mode
} Settings
●● The displayed image may differ
depending on the model.
▶
❑❑ Connecting a USB Device
1. Turn on your TV.
2. Connect a USB device containing
recorded TV, photo, music and/or
movie files to the USB port on the
back or side panel of the TV.
◀
3. When a USB device is connected to
the TV, the Connected Device window
appears. Select a connected device,
and then press ENTERE.
English
TV Rear Panel
USB Drive
●● The position of the USB port may differ
depending on the model.
▶
Read this information before using Smart Hub with a USB device .
NN This might not work properly with unlicensed multimedia files.
NN Important information before using the Smart Hub.
●● MTP (Media Transfer Protocol) is not supported.
●● The file system supports FAT16, FAT32 and NTFS. Note that the supported
maximum file size is 2GB for FAT16 and 4GB for FAT32.
●● Certain types of USB Digital camera and audio devices may not be
◀
▶
compatible with this TV.
●● Smart Hub supports only the Sequential jpeg format. It does not
support the Progressive jpeg format.
●● Smart Hub supports only USB Mass Storage Class (MSC) devices.
MSC is a Mass Storage Class Bulk-Only Transport device.
Examples of MSC are Thumb drives, Flash Card Readers and USB
HDD (USB HUB are not supported). Devices should be connected
directly to the TV's USB port.
English
●● Before connecting your device to the TV, please back up your
files to prevent them from damage or loss of data. SAMSUNG is not
responsible for any data file damage or data loss.
●● Connect a USB HDD to the dedicated USB 2(HDD) port.
●● Do not disconnect the USB device while it is loading.
●● The higher the resolution of the image, the longer it takes to
display on the screen.
◀
●● The maximum supported JPEG resolution is 15360 X 8640 pixels.
●● If a file is corrupted or the TV does not support the file type, the
"Not Supported File Format." message apears.
●● If the files are sorted by Folder View, up to 1000 files can be
displayed in each folder.
English
▶
●● MP3 files with DRM that have been downloaded from a pay site
cannot be played. Digital Rights Management (DRM) is a technology
that supports the creation of content, the distribution and
management of the content in an integrated and comprehensive
way, including the protection of the rights and interests of the
content providers, the prevention of the illegal copying of contents,
as well as managing billings and settlements.
●● If more than 2 PTP devices are connected, you can only use one
◀
at a time.
●● If more than two MSC devices are connected, some of them may
not be recognized. A USB device that requires high power (more
than 500mA or 5V) may not be supported.
●● If an over-power warning message is displayed while you are
connecting or using a USB device, the device may not be
recognized or may malfunction.
English
▶
●● If the TV has no input during the time set in Auto Protection Time,
the Screensaver will run.
●● The power-saving mode of some external hard disk drives may be
released automatically when you connect them to the TV.
●● If you connect a USB device with a USB extension cable, the TV
may not recognize the USB device or read the files on the device.
●● If a USB device you connect to the TV is not recognized, the files
◀
on the device are corrupted, or a file in the list is not played,
connect the USB device to a PC, format the device and check the
connection.
●● If a file you deleted from the PC is still found when you run
Smart Hub, use the "Empty the Recycle Bin" function on the PC to
permanently delete the file.
English
▶
❑❑ Connecting to a PC through a network
You can play pictures, music, and videos saved in your PC through a
network connection in the AllShare mode.
1. For more information on how to configure your network, refer to the 'Network
Connection'.
●● It is recommended that you locate both the TV and the PC on the same
◀
subnet. The first 3 parts of the subnet address of the TV and the PC IP
addresses should be the same and only the last part (the host address)
should be changed. (e.g. IP Address: 123.456.789.**)
2. Using a LAN cable, connect between the external modem and the PC onto
which the Samsung PC Share Manager Program will be installed.
●● You can connect the TV to the PC directly without connecting it through a
Sharer (Router).
NN You can download the Samsung PC Share Manager program from
www.Samsung.com/sec
English
▶
NN The following Smart Hub functions are not supported when you are
playing media from a PC connected through a network:
●● The Background Music and Background Music Setting functions.
●● Sorting files by preference in the Photos, Music, and Videos folders.
●● The π (REW) or µ (FF) button while a movie is playing.
NN Divx DRM, Multi-audio, embedded captions are not supported.
NN Set your PC firewall program so that Samsung PC Share Manager is a
◀
permitted program.
▶
English
NN Depending on the Internet server, when you use My Contents through
a network connection:
●● The sorting method may vary.
●● The Scene Search function may not be supported.
●● The Resume function, which resumes playing of a video, may not
be supported.
–– The Resume function does not support multiple users.
◀
(It memorizes only the point where the most recent user stopped
playing a video.)
●● The l or r button may not work depending on the content
information.
NN You may experience file stuttering while playing a video in Smart Hub
through a network connection.
English
▶
❑❑ Screen Display
Move to the file you want to play using the l / r / u / d /buttons,
and then press the ENTERE or ∂ (Play) button. The file is played.
Device name: Displays
the name of the
connected device
◀
File List Section:
Displays files sorted
according to your
criteria.
Music
Home: Return to content
home
SUM
Upper Folder
Sweet Candy
I Love Music
Music_5
Ming
No Singer
Music_1
Music_6
No Singer
No Singer
Music_2
Music_7
No Singer
No Singer
Music_3
Music_8
No Singer
No Singer
Music_4
Music_9
No Singer
No Singer
Move to another page containing a list of files.
English
Change Content/Device:
Changes the content
type or connected
device.
Sorting: Displays sort
criteria. Sort criteria
differ, depending on the
content.
Edit Mode: Select and
play multiple files or
assign them to My
Playlist. This function is
available only for Music.
▶
❑❑ Recorded TV
■■ Timeshift Function
You can pause a live TV or start watching the TV program from the
beginning point you started Timeshift function.
Start Timeshift function with PAUSE button
◀
1. When you are watching a TV channel, press the ∑ (PAUSE)
button.
2. The image of TV program will be paused, and then Timshift bar will
appear. Live TV is displayed on the left side of Timeshift bar.
English
▶
Start Timeshift fuction with PLAY button
1. When you are watching a TV channel, press the ∂ (PLAY) button.
2. The Timeshift function starts and the Timeshift bar will appear. Live
TV is displayed on the left side of Timeshift bar.
◀
▶
English
Timeshift information
You can see current information about Timeshift function.
1. Press the ENTERE button on your remote while Timeshift function
is enabled.
2. Timeshift bar appears as below.
●● Timeshift Screen
◀
Shows current playback point.
Mode Display: Shows current
states of Timeshift function. The
past icon appears when current
scene is the previous
Shows recorded time
by Timeshift function.
Shows progress bar.
English
▶
Playback control button during Timeshift function is enabled
●● Each time press the SEARCH (π, µ) button, the playback speed
change as follows. (π1 π2 → ····· π6 π7 / µ1 µ2 → ·····
µ6 µ7)
●● l button: Jump to - 20 sec from current position
●● r button: Jump to + 20 sec from current position
●● ∑ (PAUSE) button : Pause the scene while keeping Timeshift
◀
operation.
–– In pause (∑) mode, press the SEARCH (π, µ) button. If
you press the SEARCH (π, µ) button, the playback speed is
reduced to (ƒ)1/8 (ƒ)1/4 (ƒ)1/2 / („)1/8 („)1/4 („)1/2.
●● ∫ (STOP) button : If you are watching the past scene, playback
point will jump to the same scene with Live TV. If you are
watching the same scene with Live TV, the Timeshift function will
be stopped.
English
▶
●● In pause mode, press the PAUSE (∑)button. Each time the PAUSE
(∑) button is pressed, a new frame will be appear.
●● To return to nomal speed playback, press the PLAY (∂) button.
NN NOTE
●● The product does not play sound in step mode.
●● Step motion operates only in the forward direction.
◀
To stop Timeshift
1. If Timeshift bar is not in ∑ (PAUSE) or PAST mode, press ∫ (STOP)
button.
2. If the Timshift bar is in ∑ (PAUSE) or PAST mode, Timeshift mode
will be changed into Live TV when you press ∫ (STOP) button
first time.
3.Select YES button and press ENTERE button to stop Timeshift.
English
▶
To use the recording or Timeshift function, the connected USB device
must be available for recording. Device format is recommended to use
USB HDD.
NN During the Device formatting, do not disconnect the device while
formatting is in progress. If you format the device, all files will be
deleted.
NN Before formatting your device to the TV, please back up your files
◀
to prevent them from damage or loss of data. SAMSUNG is not
responsible for any data file damage or data loss.
English
▶
■■ Timer Recording
You can reserve a recording of a program in the Schedule Manager.
To use this function, you have to set the current time first.
Using the Timer Recording (digital channels only)
1. Enter the Smart Hub and select Schedule Manager.
2. To add a recording reservation, press the ENTERE button.
◀
▶
English
3.In the Select window, select Timer Recording using the l or r
button.
NN A USB HDD of 5,400 rpm or higher is recommended. However,
a RAID USB HDD is not supported.
NN You can only make a recording reservation for a USB device for
which a device performance test has been completed.
◀
4.Configure the Antenna, Channel, Date and Start Time for the
recording reservation.
English
▶
Instant Recording
You can instantly record the current program.
1. While watching TV, to make a recording, press the ∏ (REC).
NN A USB HDD of 5,400 rpm or higher is recommended. However,
a RAID USB HDD is not supported.
NN You can only make a recording for a USB device for which a
Device Performance Test has been completed.
◀
2. If the Length window appears, set the recording length and select
OK.
English
▶
Using the Timeshift Function
You can pause and rewind live broadcasts in the same way as a DVD
title.
1. To start the Timeshift function while watching TV, press the ∂ (Play) button.
The Timeshift function runs.
2. To stop the function, press the ∫ (Stop) button.
NN The Timeshift function works up to 90 minutes.
◀
NN After the Timeshift mode function has run for the maximum time, the time
information will be fixed to "00:00:00."
NN The Timeshift function is not supported for analog channels.
NN The Timeshift functions are disabled for channels locked with
Channel Lock.
English
▶
Before Using the Timeshift and Recording Functions...
[[ Since the digital rights management (DRM) technology is applied to the
recorded data, it cannot be played on a PC or different TV. In addition,
the recorded data is not played if the video board of the TV has been replaced.
NN NOTE
●● A USB HDD of 5,400 rpm or higher is recommended. However,
◀
a RAID USB HDD is not supported.
●● Depending on the free space and the visual quality of the
recording of the USB storage device, the time supported by the
recording and the Timeshift may differ.
●● Even if you pause the current program, it may automatically
resume if the Timeshift function is overloaded.
English
▶
●● If the free space of the USB device reaches 5% while recording,
the recording will be stopped.
●● The picture while a file is playing or the Timeshift operation is
running is affected by the TV settings.
●● If you change the input source while recording, the screen will
go blank until the change is completed.
●● When recording in the Guide or a Channel, and the Device
◀
Performance Test for the USB device has failed, the Device Format
and Device Performance Test for the device are performed again.
●● The Timeshift function can only be used when a USB device
for which the Device Performance Test has been completed, is
connected.
English
▶
●● To record the current program or to perform a Timer Recording,
the recording start time may differ by 1 or 2 seconds depending
on the command execution time.
●● If you connect a USB device for TV recordings, the corrupted
Timeshift or recording files are automatically deleted.
●● If you change the input source while recording, although the
recording continues, you cannot use the ∏ (REC) button.
◀
●● If the Off Timer or Auto Turn Off function is set and a recording
is in progress, the TV is turned off when the recording is
complete.
●● To use the recording function, set Max. Power Saving to Off.
Recording will stop if the PC switches to standby mode when
Max. Power Saving is set to On and the monitor is connected to
the HDMI1/DVI port on the PC.
English
▶
Playing a recorded TV program
1. In the Smart Hub, select Recorded TV.
2. Select a file from the saved files, press the ENTERE button or the
∂ (Play) button.
●● While playing a file, you can search the file using the l or r
button.
●● You can use the a π (REW) or µ (FF) button
◀
▶
English
Recorded TV: Device Management
Go to Smart Hub > Recorded TV, and select
using the
l / r / u / d buttons.
Device Management
● Device Format: Formats a USB storage device connected to the TV
according to the Recorded TV format.
● Checking Device: Tests a USB storage device to check that the
◀
device is compatible with the Recorded TV format.
● Device Performance Test: Tests the performance of a USB storage
device connected to the TV to check that the device is compatible
with the recording and Timeshift functions.
● Default Recording Device: Selects a USB storage device to save a
recorded TV program to when multiple USB storage devices are
connected to the TV.
● Device Information: Displays the information for a USB storage
device that is currently using the Recorded TV function.
English
▶
■■ Videos
Playing a Video
1. Press the l / r / u / d button to select
the desired video in the file list.
Play
1:02:15 / 2:04:10
Movie 1.avi
2. Press the ENTERE button or ∂ (Play)
button.
●● The file name appears on the top with
◀
its playing time.
●● If video time information is unknown,
●● The displayed image may differ
depending on the model.
the playing time and progress bar are
not displayed.
●● During video playback, you can search using the l and r
buttons.
●● You can use the π (REW), µ (FF), Pause, Stop, and Play
buttons on the bottom of your remote during playback.
English
▶
●● Supported Video Subtitle Formats
Name
File extension
Format
MPEG-4 time-based text
.txt
XML
SAMI
.smi
HTML
SubRip
.srt
string-based
SubViewer
.sub
string-based
Micro DVD
.sub or .txt
string-based
◀
▶
English
●● Supported Video Formats
File
Extension
*.avi
*.mkv
◀
*.asf
*.wmv
*.mp4
Container
AVI
MKV
ASF
ASF
MP4
Video Codec
Resolution
Frame
rate (fps)
Bit rate
(Mbps)
Divx 3.11 / 4.x / 5.1 / 6.0
1920x1080
6 ~ 30
8
XviD
1920x1080
6 ~ 30
8
H.264 BP / MP / HP
1920x1080
6 ~ 30
25
MPEG4 SP / ASP
1920x1080
6 ~ 30
8
Motion JPEG
1920x1080
6 ~ 30
8
Divx 3.11 / 4.x / 5.1 / 6.0
1920x1080
6 ~ 30
8
XviD
1920x1080
6 ~ 30
8
H.264 BP / MP / HP
1920x1080
6 ~ 30
25
MPEG4 SP / ASP
1920x1080
6 ~ 30
8
Motion JPEG
800x600
6 ~ 30
8
Window Media Video
v9
1920x1080
6 ~ 30
25
WMA
H.264 BP / MP / HP
1920x1080
6 ~ 30
25
MPEG4 SP / ASP
1920x1080
6 ~ 30
8
XVID
1920x1080
6 ~ 30
8
MP3 /
ADPCM /
AAC
English
Audio
Codec
MP3 / AC3
/ LPCM /
ADPCM /
DTS Core
MP3 / AC3
/ LPCM /
ADPCM /
WMA
▶
File
Extension
*.3gp
*.vro
◀
*.mpg
*.mpeg
*.ts
*.tp
*.trp
Container
3GPP
VRO
VOB
PS
TS
Video Codec
Resolution
Frame
rate (fps)
Bit rate
(Mbps)
Audio
Codec
H.264 BP / MP / HP
1920x1080
6 ~ 30
25
MPEG4 SP / ASP
1920x1080
6 ~ 30
8
ADPCM /
AAC / HEAAC
MPEG1
352x288
24 / 25 /
30
30
MPEG2
1920x1080
24 / 25 /
30
30
MPEG1
352x288
24 / 25 /
30
30
MPEG2
1920x1080
24 / 25 /
30
30
H.264
1920x1080
6 ~ 30
25
MPEG2
1920x1080
24 / 25 /
30
30
H.264
1920x1080
6 ~ 30
25
VC1
1920x1080
6 ~ 30
25
English
AC3 /
MPEG /
LPCM
AC3 /
MPEG /
LPCM /
AAC
AC3 / AAC
/ MP3 /
DD+ / HEAAC
▶
Other Restrictions
NN NOTE
●● Video content will not play, or not play correctly, if there is an
error in the content or the container.
●● Sound or video may not work if the contents have a standard
bitrate/frame rate above the compatible Frame/sec listed in the
table above.
◀
●● If the Index Table is in error, the Seek (Jump) function is not
supported.
●● You may experience file stuttering while playing a video through a
network connection.
English
▶
●● The menu may take longer to appear if the video's bit rate
exceeds 10Mbps.
●● Some USB/digital camera devices may not be compatible with the
player.
Video Decoder
Audio Decoder
•• Supports up to H.264, Level 4.1
•• H.264 FMO / ASO / RS, VC1 SP / MP /
•• Supports up to WMA 7, 8, 9, STD
•• WMA 9 PRO does not support 2 channel
excess multi channel or lossless audio.
AP L4 and AVCHD are not supported.
◀
•• WMA sampling rate 22050Hz mono is not
•• XVID, MPEG4 SP, ASP:
supported.
−− Below 1280 x 720: 60 frame max
−− Above 1280 x 720: 30 frame max
•• GMC 2 over is not supported.
English
▶
Using the Play Continuously Function (Resume Play)
If you exit a movie when it is playing, you can play the movie later from
the point where you stopped it.
NN The Resume function does not support multiple users. (It will only
memorize the point where the most recent user stopped playing.)
1. Select the movie file you stopped and want to resume by pressing
the l or r button.
◀
2. Press the ∂ (Play) or ENTERE button.
NN When playing begins, the triangle icon appears in the progress
display bar.
3.Press the 간편메뉴 button and select Resume. The movie will begin to
play from where it was stopped.
English
▶
■■ Music
Playing Music
1. Press the l / r / u / d button to select the
desired music file in the file list.
2. Press the ENTERE button or ∂ (Play)
button.
◀
Music
Playlist
I Love You
Ming
NN Smart Hub only displays files with MP3 file
Music_1
No Singer
Music_2
No Singer
Music_3
No Singe
g r
Love
R&B
2011-01-01
1.2MB
01:01/03
03:12
:12
●● When the music is playing, you can search
using the π (REW) and µ (FF) button.
13/30
I Love You
Ming
Music_4
No Singer
Music_5
No Singer
Music_6
No Singer
Music_7
No Singer
Music_8
No Singer
●● The displayed image may differ
depending on the model.
extensions. Other file extensions are not
displayed, even if they are saved on the same USB device.
NN If the sound is abnormal when you play MP3 files, adjust the Equalizer in the
Sound menu. (An over-modulated MP3 file may cause a sound problem.)
English
▶
Creating My Playlist
1. On the Music screen in the Smart Hub menu, press the l / r / u / d
Edit Mode, and then press the ENTERE button.
button to select
2. Press the l / r / u / d button to select the tracks you want to add,
and then press the ENTERE button.
NN A c mark appears in the left of selected file(s).
NN To select all the files on the current page, select Select All at the
◀
top left of the screen.
3.Press the l / r / u / d button to select Add My Playlist.
NN If you select Delete All Playlists, the My Playlist returns to the default
playlist.
English
▶
4.Press the ENTERE button. The "Selected items were added to My
Playlist." message appears.
5.The newly created or updated playlist will be on the main Music
page.
Playing My Playlist
◀
Select the My Playlist folder and it will play automatically. Press the u or
d button to play a different music file within the play list.
NN To delete a file from My Playlist, select the recycle bin icon next to
the file you want to delete by using the direction buttons, and then
press ENTERE. The file will be deleted from My Playlist.
English
▶
Playing Selected Music Files
1. On the Music screen in the Smart Hub menu, press the l / r / u / d
Edit Mode on the far right side of the screen, and
button to select
then press the ENTERE button.
2. Select a music file from the file list by pressing the l / r / u / d
button and press the ENTERE button.
NN NOTE
◀
●● The c mark appears to the left of the selected files.
●● To select all the files on the current page, select Select All at
the top left of the screen.
●● To cancel a selection, press the ENTERE button again.
3.Press the l / r / u / d button to play the selected music file.
English
▶
■■ Photos
Viewing a Photo (or Slide Show)
1. Press the l / r / u / d button to select the
desired file in the file list.
Normal
Friends.jpg
1024 X 768
2011/01/03
2. Press the ENTERE button.
●● Press the ∂ (Play) button in the file list to
◀
immediately start a slide show.
●● All files in the file list section will be
displayed in the slide show.
●● The displayed image may differ
depending on the model.
NN Music files can be automatically played during the Slide Show if the
Background Music is set to On.
NN The Background Music cannot be changed until the BGM has finished
loading.
English
▶
❑❑ Smart Hub - Additional Functions
Sorting the file lists
To sort files on the file list, press ENTERE on
l / r / u / d buttons.
Sort Criteria
◀
Folder View
Default
Title
Latest Date
Sorting using the
Recorded
TV
Operation
Displays the whole folder. You
can view the file name and
thumbnail by selecting the
folder.
Default is sorted by Title
without Group.
Sorts and displays the file title
in Symbol/Number/Alphabet/
Special order.
Sorts and shows files by the
latest date.
English
Videos
Music
Photos
>
>
>
>
>
>
>
>
>
>
>
▶
Sort Criteria
◀
Operation
Recorded
TV
Videos
>
>
Music
Earliest Date
Sorts and shows files by the
earliest date.
Artist
Sorts the music file by artist in
alphabetical order.
>
Album
Sorts the music file by album
in alphabetical order.
>
Genre
Sorts music files by the genre.
>
Monthly
Sorts and shows photo files by
month.
Weekly
Sorts and shows recorded
program files by week.
>
Channel
Sorts and shows recorded
program files by channel.
>
English
Photos
>
>
▶
Recorded TV/Videos/Music/Photos Play Option menu
When playing recorded TV, video or photo files, you can press the
간편메뉴 button to display an Options menu. Below are a series of tables
listing the options available and the media each option applies to.
Option Name
◀
Operations
List
Return to the file list.
Previous / Next
Go to previous / next photo file.
Shuffle
You can play the music
sequentially or randomly.
Play
Continuously
Resume
Recorded
TV
Videos
Music
Photos
>
>
>
>
>
>
You can restart a recorded
program from where you stopped
it.
You can restart a movie file from
where you stopped it.
English
>
>
▶
Option Name
Section Repeat
◀
Recorded
TV
Operations
You can set up the function to
repeat some section.
You can also watch some section
you want to.
Videos
Photos
>
Edit Favorites
You can register frequently
watched recorded TV program to
the Favorites so that you can select
them quickly.
>
Scene Search
You can search for a particular
scene by dividing the file into 5
chapters.
>
>
Title Search
You can move directly to another
Title.
>
>
Time Search
You can search the movie using
l and r buttons at intervals of 10
seconds.
>
>
English
Music
▶
Option Name
◀
Recorded
TV
Operations
Videos
Subtitle
You can view a subtitle. You can
select a specific language if
the subtitle file contains multiple
languages.
Repeat Mode
You can play movie and music
files repeatedly.
>
>
Picture Size
You can adjust the picture size to
your preference.
>
>
Picture Mode
You can change the Picture Mode.
Sound Mode
You can change the Sound Mode.
Audio Language
You can enjoy video in one of
supported languages. The function
is enabled only when you play
stream-type files which support
multiple audio formats.
>
Subtitle Setting
Displays the Subtitle Setting. You
can set up a subtitle option.
>
English
Music
Photos
>
>
>
>
>
>
>
>
▶
Option Name
◀
Operations
Recorded
TV
Videos
Music
>
>
>
Photos
Play / Pause
You can play or pause when
playback a file. Alternatively,
use the ∂ or ∑ button on the
remote.
Start Slide Show /
Stop Slide Show
You can start or stop a slide
show.
>
Slide Show Speed
Yo u c a n s e l e c t t h e s l i d e s h o w
speed during the slide show.
Alternatively, use the π or µ
button on the remote.
>
Slide Show Effect
You can set various slide show
effects.
>
Background Music
On / Off
You can start or stop background
music.
>
English
▶
Option Name
◀
Recorded
TV
Operations
Videos
Music
Photos
Background Music
Setting
You can set and select
background music when watching
a photo file or slide show.
>
Zoom
You can zoom into images in full
screen mode.
>
Rotate
You can rotate images.
>
NN Pressing the 정보표시 button while a device name is selected will
display information about the selected device.
NN Pressing the 정보표시 button while a file is selected will display
information about the selected file.
English
▶
❑❑ Using Samsung Apps
■■ Samsung Apps
Samsung Apps is a store from which you can download applications to
use on Samsung TV/AV equipment.
You can enjoy a variety of contents such as videos, music, photos,
games, useful information etc. using the downloaded applications.
◀
New applications are added regularly.
English
▶
NN Using the colored buttons with Samsung Apps.
●● a Red (Login): To log in to the
Internet service.
What's New?
What's New?
Video
Game
●● b Green (List View / Thumbnail
View): To toggle the view between
List and Thumbnail.
Sports
Lifestyle
Accu Weather
TV store Test User001
World Clock
TV store Test User002
Twitter
Information
TV store Test User003
Other
Facebook
My Account
Help
TV store Test User004
Picasa Web
TV store Test User005
a Login
●● } Blue (Sort by): To sort the
◀
applications by Recommended, Most
downloaded, Most recent or Name.
b Thumbnail View
●● The displayed image may differ
depending on the model.
NN This button can be used in all categories except for What's
New.
●● πµ (Page): Move to previous or next page.
●● R Return: Moves to previous menu.
English
ăµ page
R Return
▶
Using Samsung Apps by category
The following categories are available:
●● What's New?: Displays newly registered applications.
●● Video: Displays apps that provide video media such as movies, TV
shows and short length videos.
●● Game: Displays various game apps such as sudoku and chess.
●● Sports: Displays apps that provide sports content such as game
◀
results, images and short length video.
●● Lifestyle: Includes apps that provide lifestyle media services such as
music, personal photo management tools, and social networking such
as Facebook and Twitter.
English
▶
●● Information: Includes apps that provide information content such as
news, financial information, stock quotes, weather, etc.
●● Other: Includes other miscellaneous apps.
●● My Account: Displays the application list and your cyber cash balance.
NN Starting in the middle of 2010 (US and Korea only), you can
purchase cyber-cash that you can use to buy applications through
tv.samsung.com.
◀
●● Help: If you have questions about Smart Hub, check this section first.
English
▶
[Legal Statement]
Due to the various capabilities of products featuring the Samsung
Smart Hub - Content Service, as well as limitations in the available
content, certain features, applications, and services may not be
available on all devices or in all territories.
◀
Some features on Smart Hub may also require additional peripheral
devices or membership fees that are sold separately. Please visit
www.samsung.com/sec for more information on specific device
information and content availability. The services and availability of
content through Smart Hub are subject to change from time to time
without prior notice.
English
▶
❑❑ Smart Hub Troubleshooting
◀
Issues
Possible Solutions
Some application contents only
appear in English. How can I
change the language?
Application content language may be different from
application user interface language.
Some application services do
not work.
Check with that service provider.
When a network error occurs, I
can only use the setting menu.
If network connection doesn't work, your service might
be limited, as all functions except the setting menu are
needed to connect to the internet.
The ability to change the language depends on the
service provider.
Refer to help website for application service provider
information.
English
▶
All content and services accessible through this device belong to third parties and are
protected by copyright, patent, trademark and/or other intellectual property laws. Such
content and services are provided solely for your personal noncommercial use. You may
not use any content or services in a manner that has not been authorized by the content
owner or service provider. Without limiting the foregoing, unless expressly authorized by
the applicable content owner or service provider, you may not modify, copy, republish,
upload, post, transmit, translate, sell, create derivative works, exploit, or distribute in any
manner or medium any content or services displayed through this device.
◀
YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT USE OF THE DEVICE IS AT YOUR SOLE
RISK AND THAT THE ENTIRE RISK AS TO SATISFACTORY QUALITY, PERFORMANCE AND
ACCURACY IS WITH YOU. THE DEVICE AND ALL THIRD PARTY CONTENT AND SERVICES
ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED.
SAMSUNG EXPRESSLY DISCLAIMS ALL WARRANTIES AND CONDITIONS WITH RESPECT
TO THE DEVICE AND ANY CONTENT AND SERVICES, EITHER EXPRESS OR, IMPLIED,
INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY, OF SATISFACTORY
QUALITY, FITNESS FOR A PARTICULAR PURPOSE, OF ACCURACY, OF QUIET ENJOYMENT,
AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SAMSUNG DOES NOT GUARANTEE
THE ACCURACY, VALIDITY, TIMELINESS, LEGALITY, OR COMPLETENESS OF ANY CONTENT
OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND DOES NOT WARRANT THAT
THE DEVICE, CONTENT OR SERVICES WILL MEET YOUR REQUIREMENTS, OR THAT
OPERATION OF THE DEVICE OR SERVICES WILL BE UNINTERRUPTED OR ERROR-FREE.
English
▶
UNDER NO CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL SAMSUNG BE LIABLE,
WHETHER IN CONTRACT OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL
OR CONSEQUENTIAL DAMAGES, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES
ARISING OUT OF, OR IN CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR AS A
RESULT OF THE USE OF THE DEVICE, OR ANY CONTENT OR SERVICE ACCESSED BY YOU
OR ANY THIRD PARTY, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
◀
Third party services are subject to be changed, delayed, removed, stopped or cease
and the access to the services can be deactivated at anytime without prior notice.
Samsung Electronics does not express nor guarantee the terms of any contents or
services. Content and services are transmitted by third parties by means of networks and
transmission facilities over which Samsung has no control. Without limiting the generality of
this disclaimer, Samsung expressly disclaims any responsibility or liability for any change,
interruption, disabling, removal of or suspension of any content or service made available
through this device. Samsung may impose limits on the use of or access to certain
services or content, in any case and without notice or liability.
Samsung is neither responsible nor liable for customer services related to the content and
services. Any questions or requests for services relating to the content or services should
be made directly to the respective content and service providers.
English
▶
❑❑ About AllShare™
AllShare connects your TV and compatible Samsung mobile phones/
devices through a network. On your TV, you can view call arrivals
and SMS messages received by your mobile phones. In addition, you
can play media contents including videos, photos, and music saved
on your mobile phones or the other devices (such as your PC) by
controlling them on the TV via the network. Additionally, you can use
your TV for browsing web pages on your mobile phones.
◀
NN For more information, visit "www.samsung.com/sec" or contact the
Samsung call center. Mobile devices may need additional software
installation. For details, refer to each device's user's guide.
English
▶
NN If your Samsung TV connects to a non-Samsung DLNA server, a
compatibility issue may occur during video playback.
NN By connecting your Samsung TV to a network via AllShare™, you
can use Samsung’s original functions as follows:
–– Playback of various video formats (DivX,XVID, MP4, 3GPP, AVI,
ASF, MKV, etc.)
–– Video thumbnail feature
–– Bookmark function (to resume video playback)
◀
–– Auto-chaptering (scene navigation)
–– Digital content management
–– Compatibility with various subtitle formats (SRT, SMI, SUB, TXT,
TTXT)
–– Search with file names
–– And many others
English
▶
❑❑ Setting Up AllShare™
■■ AllShare Settings
●● Media (On / Off): Enables or disables the media
function. When the media function is on, you can
control Media contents play using mobile phones
or other devices that support DLNA DMC.
AllShare Settings
Media
Message
●● Message (On / Off): Enables or disables the
◀
message function (for call arrivals and SMS
messages received by your mobile phones).
▶
●● The displayed image may differ
depending on the model.
English
■■ Media / Message
Shows a list of mobile phones or connected devices which have been
set up to use the Media or Message function with this TV.
NN The Media function is available in all devices which support DLNA
DMC.
●● Allowed / Denied: Allows/Blocks the devices.
●● Delete: Deletes the devices from the list.
◀
NN This function only deletes the name of the device from the list.
If the deleted device is turned on or tries to connect to the TV,
it may appear on the list again.
English
▶
Using the Media Function
In addition, you can play media contents including videos, photos and
music saved on your mobile phones or the other devices (such as your
PC) by controlling them on the TV via the network.
●● If the media function is executed for the first time, the warning
popup window appears. Press the ENTERE button to select Allow,
then you can use the Media function on that device.
◀
●● To prevent media content transmission from the mobile phone, set
Media to Off in the AllShare Settings.
●● Content may not be played on your TV depending on the
resolution and format.
●● Depending on the type of media content, the ENTERE and l / r
buttons may not work.
●● Using the mobile device, you can control the media. For more
details, refer to the manual of each device.
English
▶
Using the Message Function
Using this function, you can view the arrived calls and messages of the
mobile phone through the alarm window while watching TV.
NN Note
●● To deactivate the alarm window, set the Message to Off in the
AllShare Settings.
●● If OK is selected, or if OK is not selected after the message has
◀
appeared once, the message will be deleted. The message is not
deleted from the mobile phone.
●● If a message of an unknown mobile phone is displayed, select the
mobile phone in the Message menu of the AllShare Settings and
select Blocked to block the message from the mobile phone.
English
▶
Message View
If a new SMS message arrives while you are watching TV, the alarm
window appears. If you select the OK button, the contents of the
message are displayed.
NN You can configure the viewing settings for SMS messages on your
mobile phones. For the procedures, refer to the mobile phone
manual.
◀
NN Some types of characters may be displayed as blank or broken
characters.
English
▶
Call Arrival Alarm
If a call arrives while you are watching TV, the alarm window
appears.
Schedule Alarm
While you are watching TV, the alarm window appears to display the
registered event.
◀
NN You can configure the viewing settings for schedule contents on
your mobile phones. For the procedures, refer to the mobile phone
manual.
NN Some special characters may be displayed as blank or broken
characters.
English
▶
Anynet+
What is Anynet+
간편메뉴T
Anynet+ is a function that enables you to control all connected Samsung devices
that support Anynet+ with your Samsung TV's remote. The Anynet+ system can be
used only with Samsung devices that have the Anynet+ feature. To be sure your
Samsung device has this feature, check if there is an Anynet+ logo on it.
NN NOTE
●● You can only control Anynet+ devices using the TV's remote
◀
control, not the buttons on the TV.
●● The TV remote control may not work under certain conditions. If
this occurs, reselect the Anynet+ device.
●● The Anynet+ functions do not operate with other manufacturers'
products.
English
▶
●● For detailed procedures to connect Anynet+ devices, refer to the
manual of the respective device.
●● Anynet+ only works when the AV device that supports Anynet+ is
in the standby state or is turned on.
●● Up to 12 AV devices supporting Anynet+ are connected. However,
only up to 3 of the same type of devices can be connected.
●● Only one home theater can be connected.
◀
▶
English
●● However, you can connect only one Anynet+ Home Theater. To
connect an Anynet+ Home Theate, connect the Home Theater to
the TV using an HDMI cable then:
–– To hear sound from the Home Theater’s Front, Left and Right
speakers, and the subwoofer only, connect a Digital Optical
cable between the 디지털 음성 출력 (옵디칼) jack on your TV and
the Digital Audio Input on the Home Theater.
–– To hear 5.1 channel audio, connect HDMI cables to your
◀
Anynet+ DVD player, satellite box, etc. Then, connect the 디지털
음성 출력 (옵디칼) jack on your DVD player, Satellite Box, etc. (i.e.
Anynet + Device 1 or 2) directly to the Home Theater, not the
TV
English
▶
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the
Anynet+ devices connected to the TV.
Anynet+ Menu
View TV
Device List
(device_name) MENU
◀
Description
•• Changes Anynet+ mode to TV broadcast mode.
•• Shows the Anynet+ device list.
•• Shows the menu of the connected device. E.g. if a DVD
player is connected, the disc menu of the DVD player will
appear.
(device_name) Tools
•• Shows the tools menu of the connected device. E.g. if a
DVD player is connected, the tools menu of the DVD player
will appear.
NNDepending on the device, this menu may not be
available.
English
▶
Anynet+ Menu
(device_name) Title Menu
Description
•• Shows the title menu of the disc in the connected device. E.g.
If a DVD player is connected, the title menu of the movie in
the DVD player will appear.
NNDepending on the device, this menu may not be
available.
Receiver
•• Sound is played through the receiver.
◀
▶
English
❑❑ Setting Up Anynet+
OO 메뉴m → System → Anynet+ (HDMI-CEC) → ENTERE
■■ Anynet+ (HDMI-CEC) (Off / On)
To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.
NN When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+
related operations are deactivated.
◀
▶
English
■■ Auto Turn Off (No / Yes)
Set an Anynet+ Device to turn off automatically when the TV is
turned off.
NN If Auto Turn Off is set to Yes, running external devices will turn off
at the same time as the TV powers off.
NN May not be enabled depending on the device.
■■ Receiver (Off / On)
◀
You can listen to sound through a receiver (i.e. Home Theater)
instead of the TV speaker.
English
▶
❑❑ Switching between Anynet+ Devices
1. Press the 간편메뉴 button, select Anynet+ (HDMI-CEC), and then
press ENTERE.
2. Select Device List, and then press the ENTERE button.
NN If you cannot find a device you want, select Refresh to refresh
the list.
◀
3.Select a device, and then press the ENTERE button. You can
switch to the selected device.
NN The Device List menu appears only when you set Anynet+ (HDMI-
CEC) to On in the System menu.
●● Switching to the selected device may take up to 2 minutes.
You cannot cancel the switching operation while switching is in
progress.
●● If you have selected an Anynet+ device by pressing the TV/
외부입력 button and then selecting its input source, you cannot
use the Anynet+ function. Make sure to switch to an Anynet+
device by using the Device List.
English
▶
❑❑ Listening through a Receiver
You can listen to sound through a receiver (i.e Home Theater) instead
of the TV Speaker.
1. Select Receiver and set to On.
2. Press the 종료 button to exit.
NN If your receiver supports audio only, it may not appear in the
device list.
◀
NN The receiver will work when you have properly connected the
optical in jack of the receiver to the 디지털 음성 출력 (옵디칼) jack
of the TV.
NN When the receiver (i.e Home Theater) is set to On, you can
hear sound output from the TV's Optical jack. When the TV is
displaying a DTV (air) signal, the TV will send out 5.1 channel
sound to the receiver. When the source is a digital component
such as a DVD player and it is connected to the TV via HDMI,
you will hear only 2 channel sound from the receiver.
English
▶
Using the ARC function
You can listen to sound through a receiver connected using an HDMI
cable without connecting a separate optical cable.
1. Select Receiver and set to On.
2. Press the 종료 button to exit.
NN To use the ARC function, a receiver which supports the HDMI-CEC
and ARC features must be connected to the HDMI 입력 2 (ARC) port.
◀
NN To disable the ARC function, set the Receiver to Off. Even if the TV
transmits the ARC signal continuously, the receiver will be blocked
from receiving the signal.
English
▶
❑❑ Troubleshooting for Anynet+
Problem
Anynet+ does not work.
Possible Solution
•• Check if the device is an Anynet+ device. The Anynet+
system supports Anynet+ devices only.
•• You can connect only one receiver (home theater).
•• Check if the Anynet+ device power cord is properly
connected.
•• Check the Anynet+ device's Video/Audio/HDMI cable
connections.
◀
•• Check whether Anynet+ (HDMI-CEC) is set to On in the
Anynet+ setup menu.
•• Check whether the TV remote control is in TV mode.
•• Check whether the remote control is Anynet+ compatible.
•• Anynet+ doesn't work in certain situations. (Searching
channels, operating Smart Hub or Plug & Play (initial setup),
etc.)
•• If you have removed and then reconnected the HDMI
cable, please make sure to search devices again or turn
your TV off and on again.
•• Check if the Anynet+ function of the Anynet device is set
on.
English
▶
I want to start Anynet+.
•• Check if the Anynet+ device is properly connected to the
TV and check if the Anynet+ (HDMI-CEC) is set to On in
the Anynet+ Setup menu.
•• Press the 간편메뉴 button to display the Anynet+ menu
and select a menu you want.
I want to exit Anynet+.
•• Select View TV in the Anynet+ menu.
•• Press the TV/외부입력 button on the TV remote control
and select a non- Anynet+ device.
•• Press < 채널 > and 이전채널 to change the TV mode.
◀
(Note that the channel button operates only when a
tuner-embedded Anynet+ device is not connected.)
The message "Connecting
to Anynet+ device..."
appears on the screen.
•• You cannot use the remote control when you are
configuring Anynet+ or switching to a view mode.
•• Use the remote control after the TV has completed
Anynet+ configuration or has finished switching to
Anynet+.
The Anynet+ device does
not play.
•• You cannot use the play function when Plug & Play (initial
setup) is in progress.
English
▶
The connected device is
not displayed.
•• Check whether or not the device supports Anynet+
functions.
•• Check whether or not the HDMI cable is properly
connected.
•• Check whether Anynet+ (HDMI-CEC) is set to On in the
Anynet+ setup menu.
•• Search Anynet+ devices again.
•• Anynet+ requires an HDMI connection. Make sure the
device is connected to your TV with an HDMI cable.
•• Some HDMI cables may not support Anynet+ functions.
•• If the connection is terminated because there has been a
◀
power failure or the HDMI cable has been disconnected,
please repeat the device scan.
The TV sound is not
output through the
receiver.
•• Connect the optical cable between TV and the receiver.
•• The ARC function enables digital output of sound using
the HDMI 입력 2(ARC) port and can only be operated when
the TV is connected to an audio receiver that supports
the ARC function.
English
▶
Other Information
❑❑ Troubleshooting
If you have a question about using the TV, please check this list first. If
you cannot find the item you want in this troubleshooting guide, please visit
"www.samsung.com/sec" and click Support or contact the service center printed on
the back cover of user manual.
Issues
Solutions and Explanations
Visual Quality
•• First of all, please perform the Picture Test and confirm that
your TV is displaying the test image properly. (Select 메뉴
- Support - Self Diagnosis - Picture Test.) If the test picture
is displayed properly, it indicates that the problem is in the
source or the signal.
◀
The TV image does not
look as good as it did in
the store.
•• If you are using an analog cable TV network or set-top-box,
upgrade it to digital one. Use HDMI or Component cables to
deliver HD (high definition) picture quality.
•• Cable/Satellite subscribers: Try HD stations from the channel
line up.
•• Antenna connection: Try HD stations after performing the Auto
program operation.
English
▶
Issues
Solutions and Explanations
The picture is distorted. A
macro block error, small
blocks, dots or pixelization
appears.
•• Compressing the video contents may cause picture distortion,
especially in fast moving pictures such as sports and action
movies.
•• The picture may be distorted by a low level signal and the
visual quality of the source. This is not a problem with the
TV.
•• Mobile phones used close to the TV (Up to 1m) may cause
noise in picture on analog and digital TV.
◀
There is poor color or
brightness.
•• Adjust the Picture options in the TV menu. (Select Picture
Mode / Color / Brightness / Sharpness.)
•• Change the Energy Saving option in the TV menu.
(Select 메뉴 → System → Eco Solution → Energy Saving.)
•• Initialize the screen with the default picture settings.
(Select 메뉴 - Picture - Reset Picture.)
There is a dotted line on
the edge of the screen.
•• If the Picture Size is Screen Fit, change it to 16:9.
•• Change cable/satellite box resolution.
English
▶
Issues
Solutions and Explanations
The picture is black and
white.
•• If you are using an AV composite input, connect the video
When changing channels,
the picture freezes or is
distorted or delayed.
•• If the TV is connected with a cable TV set-top-box, please
Color is wrong or missing.
cable (yellow) to the Green jack of component input 1 on the
TV.
reset it (reconnect the AC cord and wait until the cable box
reboots. This may take up to 20 minutes.)
•• Set the output resolution of the cable box to 1080i or 720p.
•• If you’re using a Component connection, make sure the
component cables are connected to the correct jacks.
Incorrect or loose connections may cause color problems or
a blank screen.
◀
Sound Problem
First of all, perform the Sound Test to check if the TV audio
is working properly. (Select 메뉴 - Support - Self Diagnosis Sound Test.)
If the audio is OK, the sound problem may be caused by the
source or signal.
There is no sound or
the sound is too low at
maximum volume.
•• Please check the volume of the device (Cable/Sat Box, DVD,
Blu-ray etc) connected to your TV.
English
▶
Issues
Solutions and Explanations
The picture is good but
there is no sound.
•• In the Sound menu, set the Speaker Select option to TV
Speaker.
•• If you are using an external device, make sure the audio
cables are connected to the correct audio input jacks on the
TV.
•• If you are using an external device, check the audio output
option of the device. (For example, if the TV is connected
with an HDMI device, you may have to change the audio
option of the cable TV set-top-box to HDMI.)
◀
•• If you are using a DVI to HDMI cable, a separate audio cable
is required.
•• If your TV has a headphone jack, make sure there is nothing
plugged into it.
•• Reboot the connected device by reconnecting the device’s
power cable.
English
▶
Issues
Solutions and Explanations
The speakers are making
an inappropriate noise.
•• Check the cable connections. Make sure a video cable is not
connected to an audio input.
•• For antenna or cable connections, check the signal strength.
A low level signal may cause sound distortion.
•• According to the procedures above, perform the Sound Test.
RF(Cable/Antenna)
Connection
The TV is not receiving all
channels.
◀
•• Make sure the coaxial cable is connected securely.
•• Please run the Auto Program operation to add all available
channels to the channel list. Select 메뉴 - Channel - Auto
Program and check if the correct cable TV signal type is set
in the menu.
•• Verify that the Antenna is positioned correctly.
English
▶
Issues
Solutions and Explanations
No Caption on digital
channels.
•• Check the Caption setting. If you cannot see captions
The picture is distorted. A
macro block error, small
blocks, dots or pixelization
appears.
even if you set the Caption Mode to Default or Korean, the
broadcasting station may not provide captions.
•• Some channels may not have caption data.
•• Compressing the video contents may cause picture distortion,
especially in fast moving pictures such as sports and action
movies.
•• A low signal level can cause picture distortion. This is not a
problem with the TV.
◀
PC Connection
The “Mode Not Supported”
message appears.
•• Set your output resolution of your PC so it matches the
"PC" is always shown in the
source list, even if a PC is
not connected.
•• This is normal. This is normal; "PC" is always shown in the
resolutions supported by the TV.
source list, regardless of whether a PC is connected.
English
▶
Issues
Solutions and Explanations
The video is OK but there
is no audio.
•• If you are using a HDMI connection, check the audio output
setting on your PC.
Network Connection
The wireless network
connection failed.
◀
Software Upgrade over the
network fails.
•• A Samsung Wireless USB dongle is required to use a wireless
network.
•• Check if the Network Connection is set to Wireless.
•• Make sure the TV is connected to a Wireless IP Sharer (router).
•• In the Network menu, select Network Test.
•• If you have latest SW version, SW upgrade will not proceed.
English
▶
Issues
Solutions and Explanations
Other
Purple/green rolling
horizontal bars and buzzing
noise from the TV speakers
with Component cable
connection.
•• Remove the left and right audio connections from the set-
The picture won’t display
in full screen.
•• HD channels will have black bars on either side of the screen
top-box. If the buzzing stops, this indicates that the set-topbox has a grounding issue. Replace the Component video
cables with an HDMI connection.
when displaying up-scaled SD (4:3) content.
•• Black bars at the Top & Bottom will appear during movies
◀
that have aspect ratios different from your TV.
•• Adjust the picture size options on your external device or TV
to full screen.
English
▶
Issues
Solutions and Explanations
The “Mode Not Supported”
message appears.
•• Check the supported resolution of the TV, and adjust the
The Caption item in the TV
menu is greyed out.
•• When you use an HDMI or Component connection, you cannot
external device’s output resolution accordingly. Refer to the
resolution setting table in the user manual.
select Caption from the TV menu.
•• You have to enable Caption on the external device.
◀
▶
English
◀
Issues
Solutions and Explanations
There is a plastic smell
from the TV.
•• This smell is normal and will dissipate over time.
In the Self Diagnosis Test
menu, I cannot use the TV
Signal Information.
•• This function is only available with digital channels from an
The TV is tilted to the side.
•• Remove the base stand from the TV and reassemble it.
The channel menu is
greyed out (unavailable).
•• The Channel menu is only available when the TV source is
Your settings are lost after
30 minutes or every time
the TV is turned off.
•• If the TV is in Store Demo mode, it will reset the audio
Antenna / RF/Coax connection.
selected.
and picture settings every 30 minutes. In the Plug & Play
procedures, change the Store Mode to Home Use. Press the
TV/외부입력 button to select TV mode and select 메뉴 →
System → Plug & Play → ENTERE.
English
▶
Issues
Solutions and Explanations
You have intermittent loss
of audio or video.
•• Check the cable connections and reconnect them.
•• Audio or video loss can be caused by using overly rigid or
thick cables. Make sure the cables are flexible enough for
long term use. If you mount the TV to a wall, we recommend
using cables with 90 degree connectors.
◀
You see small particles
when you look closely at
the edge of the frame of
the TV.
•• This is part of the product design and is not a defect.
The PIP menu is not
available.
•• PIP functionality is only available when you are using an
POP (TV’s internal banner
ad) appears on the screen.
•• In Plug & Play mode, select Home Use. For more information,
HDMI, PC or Component source.
refer to the description about the Plug & Play function.
English
▶
❑❑ Anti-theft Kensington Lock
◀
The Kensington Lock is not supplied
<TV Rear>
by Samsung. This is a device used
1
to physically secure the system when
using it in a public location. The
appearance and locking method may
differ from the illustration depending
<Optional>
on the manufacturer. Refer to the
manual provided with the Kensington Lock for additional information
on its proper use.
NN Please find a “K” icon at the back of the TV. A kensington slot is next to the
“K” icon.
English
▶
To lock the product, follow these steps:
1. Wrap the Kensington lock cable around a large, stationary object
such as a desk or chair.
2. Slide the end of the cable with the lock attached through the looped
end of the Kensington lock cable.
3.Insert the locking device into the Kensington slot on the product 1.
4.Lock the lock.
◀
NN These are general instructions. For exact instructions, refer to the
User manual supplied with the locking device.
NN The locking device has to be purchased separately.
NN The location of the Kensington slot may be different depending on the
TV model.
English
▶
❑❑ License
TheaterSound, SRS and the
symbol are trademarks of SRS Labs, Inc.
TheaterSound technology is incorporated under license form SRS Labs, Inc.
Manufactured under license from Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.
◀
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued &
pending. DTS and the Symbol are registered trademarks. & DTS 2.0+ Digital
Out and the DTS logos are trademarks of DTS, Inc. The product includes
software. ⓒ DTS, Inc. All Rights Reserved.
English
▶
DivX Certified to play DivX video up to HD 1080p, including premium
content.
DivX®, DivX Certified® and the related logos are trademarks of DivX, Inc.
and are used under license.
ABOUT DIVX VIDEO: DivX® is a digital video format developed by DivX, Inc. This product
is an officially authorized DivX device that can play DivX videos. Visit www.divx.com for
more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order
to play purchased DivX Video-on-Demand (VOD) content. To receive the registration code,
locate the DivX VOD section in the device setup menu. For more information to register,
refer to vod.divx.com.
◀
One or more of the following U.S. patents have been applied. 7,295,673; 7,460,668;
7,515,710; 7,519,274
Open Source License Notice
In the case of using open source software, Open Source Licenses are available on the
product menu.
English
❑❑ How to view the e-Manual
You can find instructions about your
TV’s features in the e-Manual in your
TV. To use the e-Manual, press the
E-설명서 button on your remote. Move the
cursor using the u / d / l / r buttons
to highlight a category, then a topic, and
then press the ENTERE button. The e-Manual displays the page you
want to see.
Basic Features
Changing the Preset Picture Mode
Adjusting Picture Settings
Changing the Picture Size
Changing the Picture Options
Setting up the TV with Your PC
Help
You can also access it through the menu:
OO 메뉴m → Support → e-Manual → ENTERE
NN If you want to return to the e-Manual, press the E-설명서 button on
your remote.
NN You can’t use the Try Now function if the menu is not activated.
English
Index
▶
Screen Display
TV Screen: Displays
the program, movie,
video, etc. you are
currently watching.
The category
list. Press l or r
button to select the
category you want.
Basic Features
Changing the Preset Picture Mode
Displays the sub-menu
list. Use the arrow
buttons on your remote
to move the cursor.
Press the ENTERE
button to select the
sub-menu you want.
Adjusting Picture Settings
Changing the Picture Size
◀
Changing the Picture Options
Setting up the TV with Your PC
Index
Help
Help: Displays the
e-Manual Guide or
Product Guide. Press
ENTERE button.
Operation Buttons:
Index: Displays index screen.
X: Exit the e-Manual.
English
▶
Using the Help
Display the e-Manual Guide & the Product Guide by pressing Help.
❑❑ How to view the e-Manual
You can read the introduction and
instructions about the TV features
stored in your TV.
OO MENUm → Picture → Picture Mode
→ ENTERE
Sync media from multiple devices with AllShare
Basic Features
AllShareTM syncs your digital devices so you can
enjoy music, movies and photos from your PC,
camera and mobile devices, on your larger TV
screen. Connects you to multiple PCs, as well.
Changing the Preset Picture Mode
Adjusting Picture Settings
Changing the Picture Size
Changing the Picture Size
Changing the Picture Size
Help
Return
◀
Return
<e-Manual Guide>
The e-Manual guide appears as above.
<Product Guide>
The product guide appears as above.
English
▶
How to toggle between an e-Manual topic and the corresponding menu(s).
Picture
Basic Features → Changing the Preset Picture Mode (1/1)
❑❑ Changing the Preset Picture Mode
Picture Mode
OO 메뉴m → Picture → Picture Mode → ENTERE
■■ Picture Mode t
If playing a movie or watching TV in a bright lightening
condition, switch the picture mode according to the viewing
conditions for the optimal performance.
E-설명서
Standard
Samsung MagicAngle
Off
Backlight
95
Contrast
99
Brightness
41
Sparpness
50
Color
50
NN HDMI1/DVI mode(when a PC is connected), you
can only set the Picture Mode to either Standard or
Entertain.
Try Now
Help
◀
Try Now
Home
Zoom
●● The displayed image may differ
depending on the model.
Method 1
Method 2
1. Select Try Now, if you want to execute the
corresponding menu(s).
1. Press the ENTERE button when viewing a
topic. The “Do you want to execute this?”
is displayed. Select Yes and then press the
ENTERE button. The OSD window will be
displayed.
2. To return to the e-Manual screen, press
the E-설명서 button.
2. To return to the e-Manual screen, press the
E-설명서 button.
English
▶
Viewing the Contents
Basic Features → Changing the Preset Picture Mode (1/1)
❑❑ Changing the Preset Picture Mode
OO 메뉴m → Picture → Picture Mode → ENTERE
■■ Picture Mode t
If playing a movie or watching TV in a bright lightening
condition, switch the picture mode according to the viewing
conditions for the optimal performance.
NN HDMI1/DVI
mode(when a PC is connected), you can only
set the Picture Mode to either Standard or Entertain.
◀
Home
Contents Area: Contains
the topic contents if you
selected a sub-menu. To
move to the previous or
next page, press the l
or r button.
Index
Try Now: Displays the OSD menu that corresponds to the
topic.
Home: Moves to the e-Manual home screen.
Zoom: Magnifies a screen.
Index: Displays index screen.
English
▶
Using the Zoom mode
Select the Zoom, and then press
ENTERE to magnify the screen. You can
scroll through the magnified screen by
using the u or d buttons.
NN To return the screen to normal size,
❑❑ Changing the Preset Picture Mode
OO 메뉴m → Picture → Picture Mode → ENTERE
■■ Picture Mode t
If playing a movie or watching TV in a bright
lightening condition, switch the picture mode
according to the viewing conditions for the optimal
performance.
press the RETURN button.
Return
●● The displayed image may differ
depending on the model.
◀
English
▶
How to search for a topic on the index page
1. To search for a topic, press the l
or r arrow button to select a letter,
and then press ENTERE. The Index
displays a list of topics and keywords
that begin with the letter you selected.
◀
2. Press the u or d button to select a
keyword or topic, and then press the
ENTERE button.
Index
F
P
R
S
T
Self Doagnosis
Security
Sharpness
Signal Information
Sleep Timer
Close
●● The displayed image may differ
depending on the model.
3. The e-Manual page with the topic appears.
NN To close the Index screen, press the Close button.
English
M
Cinema-quality 3D experience
3-Dimensional TVs add new depth and
dimension to create larger-than-life
experiences. 3D Active Glasses sync up with
the 3D TV to produce 3D images that virtually
leap off the screen. Favorite shows can even
be transformed to 3D in real time for the
ultimate “reality” TV.
▶
Sync media from multiple devices with AllShare
AllShare™ syncs your digital devices so
you can enjoy music, movies and photos
from your PC, camera and mobile devices,
on your larger TV screen. Connects you to
multiple PCs, as well.
◀
English
Download PDF

advertising