Samsung | SPF-83B | Samsung SPF-83B 사용자 매뉴얼

SPF-83B
|
Safety Symbols
|
Power
| Installation |
Using and
Cleaning
|
Safety Symbols
Make sure to follow the directions below to prevent accidents and damage to the product.
Failure to follow the accompanying directions may lead to serious injury or death.
Failure to follow the accompanying directions may lead to minor personal injury or property damage.
|
Safety Symbols
|
Power
| Installation |
Using and
Cleaning
|
Power
The images here are for reference only, and are not applicable in all cases (or countries).
Insert the power plug correctly until it is firmly in place.
z
Failing to do so, may cause fire.
Do not use a damaged power plug, cord or outlet, as this may cause electric shock
or fire.
Do not touch the power plug with wet hands, as this may cause electric shock.
Do not connect more than one appliance to a single outlet, as an overheated outlet
may cause fire.
Do not use force to pull the power cord. Don't place anything heavy on the power
cord, as this may cause electric shock or fire.
Make sure to turn the power off and disconnect the power plug from the outlet
before moving the product. Make sure to disconnect the connection cables from
other devices as well.
z
Moving the product without disconnecting the power cord may damage it while
moving, and may cause electric shock or fire.
Hold and pull out the plug by its body when disconnecting it from the outlet, as
pulling the plug out by the cord may cause it to be damaged.
z
Failing to do so, may cause fire, or the product may not turn on normally.
Ensure that the power plug is disconnected before cleaning the product.
z
Failing to do so, may cause electric shock or fire.
Keep the product away from places exposed to oil, smoke or moisture; do not
install inside a vehicle.
z
This may cause a malfunction, electric shock or fire.
z
In particular, avoid operating the monitor near water or outdoors where it could be
exposed to snow or rain.
Do not install the product near any heating appliance.
z
There is a risk of fire.
|
Safety Symbols
|
Power
| Installation |
Using and
Cleaning
Installation
When installing the product on a cabinet or shelf, do not let the front end of the
product project beyond its front edge.
z
Failing to do so, may cause the product to fall, resulting in a product malfunction or
personal injury.
Do not place the power cord near a heater, as the power cord may melt, causing
electric shock or fire.
Do not install the product in a car or a location exposed to oil, smoke, moisture,
water, or rainwater.
z
Any contact of these materials with the product may cause electric shock or fire.
Disconnect the power plug when there is thunder or lightning.
z
Failing to do so, may cause electric shock or fire.
Place the product down gently when installing it.
z
Failing to do so may cause product damage or personal injury.
Avoid dropping the product when moving, as this may cause product damage or
personal injury.
Do not install the product in a location easily reached by children.
z
As the product may fall and cause personal injury.
|
|
Safety Symbols
|
Power
| Installation |
Using and
Cleaning
|
Using and Cleaning
Do not insert any metal objects such as forks, wire, or gimlets, or flammable items
such as paper or matches into the ports at the back of the product, as this may
cause electric shock or fire.
z
If water or any foreign substance enters the product, make sure to turn the product
off disconnect the power plug from the outlet, and contact a service center.
Never disassemble, repair, or modify the product yourself.
z
If you need to repair your product, contact a service center. An attempt at repairing
this product may cause electric shock or fire.
If you hear a strange sound, smell anything burning, or see smoke, disconnect the
power plug immediately and contact a service center.
z
Failing to disconnect the power plug may cause electric shock or fire.
Always remove dust and water from the pins and connections of the power plug.
z
Failing to do so may cause electric shock or fire.
When cleaning the product, first disconnect the power plug and clean it with a soft,
dry cloth.
z
Do not use any chemicals such as benzene, alcohol, thinners, mosquito repellant,
aromatic, lubricant, detergent or wax.
When not using the product for a long time, make sure to disconnect the power plug.
z
Heavy accumulated dust may cause electric shock or fire.
If the product needs to be installed in a location that doesn't satisfy general
conditions, make sure to contact one of our service engineers about the installation
as the product may encounter serious quality problems due to its environment.
z
This refers to locations exposed to conditions such as heavy fine dust, chemicals, high or
low temperature, moisture, or when the product needs to be used continually without a
break over a long time.
If the product has been dropped or the product casing is damaged, turn it off and
disconnect the power plug.
z
Using the product without verifying that it has not been damaged may cause electric
shock or fire. Please contact a service center.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment) - Europe only
(Applicable in the European Union and other European countries with separate
collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed
with other household waste at the end of its working life. To prevent possible harm to the
environment or damage to health from uncontrolled waste disposal, please separate this from
other types of waste and recycle it responsibly to promote the sustainable reuse of material
resources.
Household users should contact either the retailer where they purchased this product, or their
local government office, for details of where and how they can take this item for
environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product should not be mixed with other commercial wastes for
disposal.
| Features
| Components |
Front
|
Back
|
Side
|
Features
Expand the memory capacity with a memory card. Enjoy stored images immediately.
By connecting a CF or SD/MS memory card of your digital camera to your digital photo frame, you can enjoy the
images on your digital photo frame quickly and easily. This also provides a way to expand the memory capacity of
your digital photo frame.
Stylish design
With its sleek and clean, high class design, your digital photo frame doubles as an ornament for your desk or table.
A 360 degree rotating stand allows both horizontal and vertical installations.
| Features
| Components |
Front
|
Back
|
Side
Please check that all components are contained in the delivered package.
If anything is omitted, contact the local distributor where the product was purchased. For optional items, contact a service center.
Never use a power adapter other than the adapter provided with the product.
Components
Digital Photo Frame
(Colors may differ for each product.)
Manual
|
Quick Start
Warranty
User Manual
(Not available in all locations)
Cables
Power cord
USB cable
Power Adapter
(A-mini B type)
| Features
| Components |
Front
|
Back
|
Side
|
| Features
| Components |
Front
|
Back
|
Side
|
Front
Back
The Kensington lock is a device used to physically secure the system when using it in a
public place. (The locking device has to be purchased separately.)
Kensington lock
For using a locking device, contact where you purchase it.
Connect the power adapter to this jack.
DC –In Jack
Connect the power cord to the power terminal of the power adapter.
Connect a PC or an external device using a USB cable.
USB connection
Up stream
Connect your digital photo frame to a PC's USB terminal with a USB
terminal
terminal
cable. (Compatible to USB 1.1(host))
Make sure to use the USB cable (A-mini B type) provided with the product when
connecting your digital photo frame to a PC through the up stream terminal.
Stand
A stand allows both horizontal and vertical installations.
If your digital photo frame is installed vertically, you can rotate your photos using the
rotation function to fit to the vertical installation.
Sliding Prevention
Supports the product so that it stays firmly in place on slippery surfaces.
Holder
Connect your headphones to the Headphone connection jack.
Headphone
connection jack
Speaker
You can listen to music files and movies.
| Features
Side
| Components |
Front
|
Back
|
Side
|
[
] Power Button
Turns the product on or off.
Hold down the power button at the right of the product for about 2 seconds.
Power Indicator
Connect the power cord to the power terminal of the power adapter.
Shows the power status. When the product is powered on, the power light turns
on.
[MENU] Menu Button
Displays the menu window at the bottom left corner of the screen.
[VOL +] Volume Button
Adjusts the sound volume when playing music files or movies.
[
] Up Button
Used for moving up.
[ ] Left Button
Used for moving left.
[ ] Right Button
Used for moving right.
[VOL -] Volume Button
Adjusts the sound volume when playing music files or movies.
[
Used for moving down.
] Down Button
[ENTER(
)] Enter Button
Used for selection.
[▶ll] Play / Pause Button
Play / Pause during playback.
[BACK] Back Button
Return to the previous menu.
You can insert a CF, SD, MS card into this slot to view and use the contents stored on it.
Connect a PC or an external device using a USB cable.
Down stream terminal
Connect your digital photo frame to a USB-supporting storage device
with a USB cable.
|
Power
|
USB
|
Memory Card
|
|
USB
|
Memory Card
|
Connecting the Power
Connect the power adapter to the
terminal at the back of the product.
Connect the power cord to the power adapter.
Plug the power cord for the product into a nearby outlet.
Press the
button at the right of the product to turn the product on.
|
Connecting via USB
Power
Up Stream
Used to connect your digital photo frame to a PC.
When connecting your digital photo frame to a PC through the up stream terminal, make sure to use
Terminal
the USB cable provided with the product.
Down Stream
Used to connect an external USB-supporting device to your digital photo frame.
Terminal
Some USB devices may not support Digital Photo Frame.
This product does not support USB card readers. Only USB storage is supported.
The external devices connected to your Digital Photo Frame are not recognized by your PC.
When connecting an external device to the down stream terminal, use the USB cable provided with
the external device. (For more information on external devices and their cables, contact a relevant
service center.)
Samsung carries no liability for external device malfunctions caused by using any cable except the
standard cables specified for each device.
Some external products provide a cable that does not meet USB standards. Hence, they may cause a
malfunction.
If an external storage device does not work normally when connected to your digital photo frame, try
to connect it to your PC. If it still does not work normally when connected to your PC, contact a service
center for that external device or your PC.
Connect to the upstream jack of your digital photo frame.
Connect the USB terminal of your PC.
Folder Structure
When connecting this product to your PC, it is displayed as a removable disk (E:), as shown in the figure below.
You can save and play all music and movie files in the following folders.
You can also add and delete folders as required. (However, if you delete the following default folders, they are automatically
created when your product is turned on again.)
images
A default folder created by the product
(The full path displayed in the Digital Photo Frame: Photos /
frame memory / images)
Favorites
Mainly stores photos.
Recent
Temporarily stores the last displayed photo.
The capacity of this product is 64 MB.
If the capacity is exceeded, no further files can be stored.
Do not turn off the product while saving, playing, or deleting a file.
The volume name of the removable disk (for example, E:, F:, G:) may differ
depending on your computer environment.
|
Power
|
USB
Connecting a Memory Card
CF/SD/MS CARD
Slide the card in the direction marked on the top of the card.
Removing the memory card while playing MP3s, movies, or photos, may
cause the product to operate abnormally. In this case, turn the product off
and on.
|
Memory Card
|
|
Buttons
Photos
|
|
Music
|
Video
|
Settings
|
Settings
|
Buttons
Control Buttons
Button
Description
Turns the product on or off.
Hold down the power button on the side of the product for about 2 seconds.
MENU
Opens the on-screen menu and exits from the menu.
VOL +, VOL -
These buttons allow you to adjust items in the menu.
ENTER(
Activates a highlighted menu item.
)
BACK
|
Push the button to adjust volume.
∧,∨,<,>
Buttons
|
Use this button to step one step back in the menu.
Photos
|
Music
|
Video
|
Photos
List Menu
When pressing the MENU button, the on-screen menu is displayed on the screen.
When a file or folder name includes letters and numbers other than English, it may be displayed as '*'. This is neither an error
of the product nor of the file.
Sub OSD
Upper OSD
Description
Memory Card, CF Card, USB Disk, Frame Memory
Show Pictures From
Select a connected storage media.
You can only select an external device which is currently connected.
Thumbnail List Menu
When pressing the MENU button, the on-screen menu is displayed on the screen.
When a file or folder name includes letters and numbers other than English, it may be displayed as '*'. This is neither an error
of the product nor of the file.
Sub OSD
Upper OSD
Start Slide Show
Description
Start Slide Show
Copy File, Copy All Files
Copy
You can copy the selected file to other connected storage devices.
Yes, No
Delete
Delete the file.
Set as Background
Sets the currently selected image as the Home Background for the main screen.
At this time, the Home Background in the Settings menu is automatically set to Custom.
On, Off, Setting
Background Music
Set the Background Music to On by pressing the Menu button. Then set the Background Music to
Setting by pressing the Menu button again and selecting the music you want from among the music
files saved on the Frame Memory or the connected external memory.
When copying photos from an external memory storage device (SD/MS, CF, USB memory) to the internal memory, the size of
each photo is automatically reduced to fit the size of the screen. Therefore only use the photos stored on the internal memory
with a digital photo frame.
When copying photos to the internal memory, the EXIF information (camera-related information) stored in the photo is
removed and this may take a long time if a lot of files are copied at the same time.
Slideshow Menu
Upper OSD
Pause Slide Show/
Resume Slide Show
Sub OSD
Detail OSD
Description
Pause Slide Show/Resume Slide Show
Transition
Fade, Wipe, Slide, Blind, Checker, Random, None
Select an effect for your slide show when transitioning between images.
Interval
Slide Show Settings
5 Seconds, 10 Seconds, 20 Seconds
Controls the time intervals between image files for a slide show.
Repeat
On, Off
Select the Repeat for displaying images.
Shuffle
On, Off
Select whether to playback the files sequentially or in shuffle mode.
Brightness
0~100
Adjust the brightness from 0 to 100.
Rotate
Original, 90°, 180°, 270°
You can rotate an image 90°, 180°, or 270°. You can also keep the image as is by selecting Original.
Aspect Ratio
Original, Auto Fit, Fit To Width, Fit To Screen
Select an aspect ratio for images to display.
Delete
This function deletes a picture being used for the current SlideShow.
Set as Background
Sets the image being displayed in the slide show as the Home Background for the main screen.
On, Off, Setting
Background Music
You can specify the background music for your slide shows.
Select On and move to Settings. Then select the music you want to play.
You can adjust the volume using the ∧∨ buttons to the right of your digital photo frame.
Direct Functions (Slide Show)
Button
Description
>
Play the next file in the list.
<
Play the previous file in the list.
▶ ll
Pressing the ▶ ll button alternately plays and pauses the file.
MENU
|
Buttons
Opens the on-screen menu and exits from the menu.
|
Photos
|
Music
|
Video
|
Settings
|
Music
List Menu
When pressing the MENU button, the on-screen menu is displayed on the screen.
When a file or folder name includes letters and numbers other than English, it may be displayed as '*'. This is neither an error
of the product nor of the file.
Sub OSD
Upper OSD
Description
Memory Card, CF Card, USB Disk, Frame Memory
Music Source
Select a connected media storage device.
You can only select an external device which is currently connected.
Playback Mode
Once, Repeat, Repeat Once, Shuffle
Select to playback music files either Once, repeatedly or randomly.
Copy File, Copy All Files
Copy
You can copy the selected file to other connected storage devices.
Delete
Delete the file.
Play Menu
When pressing the MENU button, the on-screen menu is displayed on the screen.
When a file or folder name includes letters and numbers other than English, it may be displayed as '*'. This is neither an error
of the product nor of the file.
Sub OSD
Upper OSD
Playback Mode
Description
Once, Repeat, Repeat Once, Shuffle
Select to playback music files either Once, repeatedly or randomly.
0~100
Brightness
Adjust the brightness from 0 to 100.
Direct Functions
Plays the next file.
>
<
Plays the previous.
∧,∨
Adjusts the volume.
Plays and Pauses a file.
▶ll
Displays the menu.
MENU
|
Buttons
Exits the menu.
|
Photos
|
Music
|
Video
|
Settings
|
Video
List Menu
When pressing the MENU button, the on-screen menu is displayed on the screen.
When a file or folder name includes letters and numbers other than English, it may be displayed as '*'. This is neither an error
of the product nor of the file.
Sub OSD
Upper OSD
Description
Memory Card, CF Card, USB Disk, Frame Memory(:default value)
Video Source
Select a connected media storage device. You can only select an external device which is currently
connected.
Playback Mode
Once, Continuous
You can playback movie files either Once or Continuously.
Copy File, Copy All Files
Copy
You can copy the selected file to other connected storage devices.
Delete
Delete the file.
Play Menu
When pressing the MENU button, the on-screen menu is displayed on the screen.
When a file or folder name includes letters and numbers other than English, it may be displayed as '*'. This is neither an error
of the product nor of the file.
Sub OSD
Upper OSD
Playback Mode
Description
Once, Continuous
Select a mode among Once, Continuous.
0~100
Brightness
Adjust the brightness from 0 to 100.
Direct Functions
>
Play the next file.
<
Play the previous.
Adjust volume.
∧,∨
▶ll
Plays and Pauses a file.
Displays the menu.
MENU
|
Buttons
Exits the menu.
|
Settings
Set the Settings
Photos
|
Music
|
Video
|
Settings
|
Sub OSD
Upper OSD
Description
English, Deutsch, Español, Français, Italiano, Русский, Português, Türkçe, 繁體中文, 简体中文,
Language
한국어
Select a language to use for your product.
Starting Mode
Home, Last Mode
You can select the menu which is displayed when your Digital Photo Frame starts.
On, Off
Auto Rotation
On : If you set the frame on its edge, the sensor detects the change and rotates the picture
automatically.
Off : If you set the frame on its edge during a SlideShow, even if the sensor detects the change, the
picture does not rotate accordingly.
MagicNet Settings
Sever Connection, IP Address, Server Name, Client Name
Enable this setting to use MagicNet.
Wireless Network (SSID)
Proxy Server
Proxy Required
Displays a list of available SSIDs when an access point exists in your vicinity.
Displays the address of the currently configured proxy server.
Yes, No
You can specify whether to use a proxy server.
Month, Day, Year, Hour, Minute, am/pm
Date and Time
Enter and set Month, Day, Year, Hour, Minute or am/pm. Whenever the power plug is disconnected,
the Date and Time information is lost. Therefore, you need to reset them each time
Time Zone
Daylight Saving Time
You can select the Time Zone that you are in. Select a Time Zone.
On, Off
Selects whether to apply Daylight Saving Time depending on the Time Zone and Summer Time.
12 Hours, 24 Hours
Time Format
You can select whether to display the time in the 12 or 24 Hours mode.
In 24 Hours, am and pm will not be displayed.
Alarm
Activation, Hour, Minute, am/pm, Repeat, Sound, Volume
You can set alarms.
Activation, Hour, Minute, am/pm
Your product will turn on at the specified time automatically.
Your product will turn off at the specified time automatically.
Auto Picture On/Off
If the screen was turned off at the Off Time, it turns on again when a key other than the Power key is
pressed.
When your Photo Frame is connected to your PC as a Mass Storage device using a Mini-Monitor
or USB cable, the screen will not be turned off even at the Off Time.
OSD Color Theme
Violet Style, Blue Style, Green Style, Orange Style
You can select a color theme for the OSD background.
Home Background
Default, Custom
You can reset the Home Background of the main menu to the default image.
1 Minute, 3 Minutes, 5 Minutes
Select the time for the screensaver to start.
Timeout
However, if no button is operated for one minute, the screensaver starts, regardless of the Timeout
Settings on the Main menu.
Brightness
0~100
Adjust the brightness from 0 to 100.
Button Sound
On, Off
You can turn the sound of the operation buttons on or off.
Firmware Update
Reset Settings
Update the product using external memory(CF/SD/MS,USB).
Please visit www.samsung.com for the latest firmware update.
Yes, No
Reverts the product Settings to factory defaults.
Product Information
Model, Firmware Version, Copyright
View the product information.
Initial Settings
I want to update firmware.
I want to connect to a monitor by using Mini-Monitor program. (Windows XP only)
MagicInfo Pro
Initial Settings
To use the wireless sharing function of this product, a wireless LAN access point (AP) must be connected to your PC.
If you turn on the product for the first time after you have purchased the product or if you turn the product off and on after
selecting "Settings"-"Reset Settings", the settings screen is displayed as shown in the figure below.
1. Choose Your Language
Turn on your Digital Photo Frame and select a language. You can
change the language via Settings -> Language.
2. Choose Your WiFi Network
A list of APs is displayed.
(If there are no APs displayed, click “Refresh Networks” to update the
list.)
Select an AP to connect to. The connection state is displayed in a popup
window and you will be moved to the main screen.
I want to update firmware.
Preparations
Digital Photo Frame
Firmware update file.
USB memory or external memory devices (CF, SD/MS)
Please visit www.samsung.com for the latest firmware update.
Connect USB
memory to PC
If you are ready, connect the USB memory to your PC.
Copy the firmware update file you downloaded to the USB memory.
(Make sure to copy the firmware update file to the root directory.)
Connect USB
memory to Digital
Photo Frame
Remove the USB memory from your PC, and connect it to your Digital Photo Frame.
If your Digital Photo Frame is off, turn it on.
Select Update
Select Firmware Update of Settings.
Updating
The update progression is displayed on the screen.
After boot-up, turn your Digital Photo Frame off, remove the USB memory, and turn
your Digital Photo Frame on again, for maximum safety.
Do not remove the USB memory during the update operation.
Do not press any key during the update operation.
Do not insert any other card during the update operation.
Do not turn your Digital Photo Frame off during the update operation.
You can identify whether the update operation has finished successfully or not by
checking the firmware version of your Digital Photo Frame is changed to the version
of the firmware update.
I want to connect to a monitor by using Mini-Monitor program. (Windows XP only)
The Digital Photo Frame not only allows you to appreciate photos but also provides an additional
Mini-Monitor function. The Mini-Monitor is a function for using the Digital Photo Frame as an
auxiliary monitor. Its usage is simple as the Digital Photo Frame connects to your PC via a USB cable.
This function allows you to work more efficiently at your PC by using an additional monitor. To use
your digital photo frame as a Mini-Monitor, first install the Frame Manager program. (However,
please note that you can use only one digital photo frame as a Mini-Monitor.)
Installing Frame Manager
Frame Manager User's Manual
Using your digital photo frame as a Mini-Monitor.
Using your digital photo frame as Mass Storage.
Changing the current mode to another mode
Adjusting the brightness
Updating the firmware
System Requirements
z
OS : Windows XP SP2
z
System Processor Speed : 1.5 GHz
z
USB : Extended Host Controller (EHCT) for USB 2.0
z
RAM : 256 MB or above
Caution
1.
Windows XP Service Pack 2 must be installed.
It might not operate with any operating systems other than Windows XP SP2. We are not liable for problems that may
occur when installing it on an operating system other than Windows XP SP2.
2.
We recommend a CPU speed of 2.4 GHz or higher.
Your digital photo frame might not operate normally if the performance specifications of your PC are lower than the
recommendations.
3.
Make sure to install it correctly as directed in the Installation Guide.
4.
Do not use your Mini-Monitor as a primary monitor.
We are not liable for any problems that may occur if you do not follow the directions. If it is used as a primary monitor,
the screen may be blank.
5.
Make sure to use the provided USB cable.
6.
When using your digital photo frame as a Mini-Monitor, all buttons except for the Power button will not operate.
7.
Move the programs displayed and used on the Mini-Monitor to the primary monitor after you have finished using it.
8.
With some video cards, Mini-Monitor may not operate normally. In this case, set Hardware acceleration to Full.
To set Hardware acceleration to Full: Right-click on the Windows Desktop and select Properties from the displayed
menu. The Display Properties window appears. Click the Settings > Advanced > Troubleshoot tab. Move the
Hardware acceleration slide to Full.
Limitation and Recommendation
z
Limitation : Hardware graphics acceleration such as DirectX or OpenGL is not supported on the Mini-MonitorDisplay as it
would require the emulation of a graphics processor by your standard CPU which would not be favourable. Media
players which are using DirectX will not work properly on Mini-Monitor Display.
> Example: GOM player,VLC Player
z
Recommedation : Do not use/run directX or openGL application on Mini-Monitor display.
MagicNet Pro
System Requirements
CPU
RAM
Minimum
P1.8
256M
Recommended
P3.0Ghz
512M
Ethernet
OS
Application
Windows XP
100M/1G
Windows 2000
WMP 9 or later
(Service Pack 4)
Connecting to an AP
Select [Setting] from the main menu.
Select [Wireless Network (SSID)] from the [Setting].
Select the SSID to connect to.
If the SSID you want to connect to is not displayed, click [Refresh network list] to update the list.
If a security key is set to the selected SSID, enter it in the Security Key Settings screen and click Done.
When the network connection is established, the results are displayed on the screen.
Installing MagicNet Pro
Insert your Setup CD into the CD-ROM drive.
Double-click the MagicInfo Pro setup program.
Select installation Language, Click "Next".
When the Setup Wizard appears, click Next.
Select the ‘I agree to the terms of this license agreement’ item and click Next.
The MagicInfo Pro server program requires a login. Enter a password to use when logging into the server. You can
change your password when you are logged in.
Select the folder to install MagicInfo Pro to.
Click Install.
The installation progress is displayed.
For the MagicInfo Pro Server program to operate correctly, we recommend restarting your computer after the setup is
finished. Click Finish.
When the setup is finished, a shortcut to the MagicInfo Pro Server program is created on the Desktop.
Double-click the icon to run the program.
Connecting to MagicNet Pro
Ensure that the network connection is normal.(
Refer to Connecting to an AP )
Select [Setting] from the main menu.
Select [MagicInfo Pro Settings] from the [Setting].
Enter the same [Server Connection] and [Server Name] settings which match the options of the server you want to
connect to.
If the [Server Connection] is set to [Direct], enter the IP address of the server you want to connect to in the [IP
Address] field.
If the server is running MagicInfo Pro and the icon in front of the Digital Photo Frame name is displayed in blue in the
"Schedule" screen, it means that the connection has been established successfully.
MagicInfo Pro User Manual
Changing the Mode from the Server (Digital Photo Frame ⇔ MagicInfo Pro )
Your Digital Photo Frame can have thee modes when connected to a server.
"Player" Mode: Operates as a Digital Photo Frame.
"Scheduler" Mode: Connected to MagicInfo Pro .
Unknown Mode: The server and your Digital Photo Frame are connected in an unknown mode.
Click on your Photo Frame in the "Schedule" screen of MagicInfo Pro and then right-click on it. You can
change the mode using the menu displayed.
When your Digital Photo Frame is in "Scheduler" mode, you can configure the "Schedule" and "Remote
Management" settings.
Changing the mode in your Digital Photo Frame. (MagicInfo Pro ⇔ Digital Photo Frame)
Hold down the MENU button of your Digital Photo Frame for five (5) seconds.
|
Specifications
|
Supported Files
Specifications
Items
Model Name
Panel
Specifications
SPF-83B
Type
8 "(20 cm)TFT
Resolution
800 x 600
Interface
Digital 6 bit
Support for MPEG1, 4, and WMV9 scaled up to 1024x768
MPEG4 SP, ASP/L3,L5 (720x480, 2Mbps, 30fps)
Supported Formats
WMV9 SP, MP/medium level (720x480, 2Mbps, 30fps)
JPEG max Image Resolution 3200x2400(8Mb)
(Progressive JPEG is not supported.)
Built-in Memory
64 Mb
Audio
1 W x 1 built-in speaker
USB 2.0
USB 2.0
(One up stream (device 2.0) and one down stream (host 1.1),
External Memory Reader is not supported)
2 in 1(SD≤4Gb / MS≤32Gb), CF
Media (Memory Card)
SDHC (High-Capacity) cards are not supported.
Power
External Power Adapter (12 V, 2 A, 24 W)
Power
Consumption
Max 12W, Normal 10W,
Off mode(Power Switch Off) under 1W
Dimensions (WxHxD)
230.5 x 182.4 x 120 mm / 9.07 x 7.18 x 4.72 inch
Weight
650 g / 1.43 lb
The product design may differ according to the model, and specifications are subject to change without prior
notice for product performance enhancement.
|
Class B Equipment (Information Communication equipment for residential use)
This product complies with the Electromagnetic Compatibility Directives for residential Use and can be
used in all areas including common residential areas. (Class B equipment radiates less electromagnetic
influences than class A equipment.)
|
Specifications
|
Supported Files
Supported Files
The Digital Photo Frame uses these modules:
WinCE 5.0
For more information, visit the following web sites:
RMI Alchemy Developer Support Site(http://209.254.132.52/RMI/EmbeddedDeveloper.nsf)
|
| Troubleshooting |
Terminology
|
Service Centers
|
Troubleshooting
This section lists various problems and solutions encountered by users while using the digital photo frame. When encountering a problem,
first check the list below and follow the suggested action if one matches your problem. If the problem still persists, contact or visit the
nearest service center.
Symptoms
My Digital Photo Frame does not turn
on.
Possible Causes and Suggested Actions
Check the power connection between the product and the power adapter.
Check whether the Samsung logo is displayed in full screen mode when
pressing the power button.
Check the memory card type. If this is not inserted correctly or is not of a
supported type, the photo may not display on the screen. (This product
The power turns on but the screen is
supports USB memory and CF/SD/MS cards only.)
blank.
Check the file extensions if the card and other connections are correct. (This
product supports the JPEG image format, MPG1, MPEG4 and WMV9 movie
formats, and MP3 music file format only. See Specifications.)
It takes some time to display an image
Loading a file from an external memory card may take several seconds. (This
after the digital photo frame turns on.
depends on the file format and size.)
No screen is displayed and just sound is
Loading a large sized file may take quite a long time. (This is a matter of
heard for MPEG4 and WMV9 movies.
specifications.)
Select one of the four values in the Menu>Aspect Photo >Original, Auto Fit, Fit
The aspect ratio of the screen looks
abnormal.
To Width, Fit To Screen menu using the buttons on the right side of the
product.
(See Menu>Aspect Photo>Original, Auto Fit, Fit To Width, Fit To
Screen)
Adjust the brightness in the Settings>Brightness menu using the buttons on
The screen color is dimmed or too strong.
the right side of the product.
(See Settings>Brightness)
Check the cable connection between the product and the external device.
I have connected an external device (USB
Check whether the external device works as a standalone, and check the
memory device or MP3 player), but it
format of the files stored on it.
does not work.
Only USB devices supporting Windows CE 5.0 can be supported.
Please check that your USB device supports Windows CE 5.0.
The screen is displayed but there is no
sound for MPEG4 and WMV9 movies.
The screen is displayed but there is no
Try to check the original movie contents file on your PC.
If there is no noticeable error in the settings, it may take some time to switch
to the next file depending on the file size and format.
Try to change the Volume menu using the buttons on the right side of the
sound for MPEG4 and WMV9 movies.
product.
Freezing may happen depending on the status of the movie file.
Breakings could happen during playback depending on the type and size of
The movie freezes at some points.
movie file.(High bps contents)
Movie file formats : MPEG 4, WMV9
Resolution : Less than 1024 x 768
A menu is not displayed immediately
Displaying the menu and other operations may take some time while the
when I press the menu button.
product is loading an image to display on the screen.
File or folder names are not displayed
correctly.
When a file or folder name includes letters and numbers other than English, it
may be displayed as '*'. If you need a file or folder name to be displayed
correctly, and not as '*', change it to English letters and numbers only.
| Troubleshooting |
Terminology
|
Service Centers
Terminology
Terms
Description
MPEG4 is a movie compression technology for video communications which
MPEG4
(Motion Picture Expert Group4)
enables implementing bi-directional multimedia. It was developed to make it
possible to transmit movies over low speed lines on the Internet or for mobile
communications. It is used widely on PCs, TVs and cell phones. A movie file
formatted in the MPEG4 format is called an MPG or MPEG file.
WMV9
(Window Media Video9)
A video codec in the MPEG4 format developed by Microsoft
MP3 is a high quality audio compression technology. It provides a 50 times
MP3
(MPEG Audio Layer-3)
higher compression than CD. Because it provides high quality and a low size
for its compression ratio, it is commonly used on the Internet and for FM radio
transmissions, etc. An audio file formatted in the MP3 format is called an MP3
file.
JPEG is an image compression technology. It provides the smallest loss of all
JPEG
(Joint Photographic Coding Expert
Group)
image compression technologies. It is used widely to transmit multimedia files
on the Internet and for other uses. An image file formatted in the JPEG format
is called a JPEG or JPG file. Usually, a JPEG file is created by taking a picture
with a digital camera, by drawing on a computer, or by a graphic package and
then by compressing the graphics image into the JPEG format.
A CF card provides a higher capacity than other types of memory card.
CF Card
Because the controller is embedded in the memory, it provides high
(CompactFlash Card)
compatibility. It is widely used in various digital products such as PDAs, digital
cameras, MP3 players, cell phones, and notebook PCs.
An SD card is a Flash memory card the size of a postage stamp. It provides
SD Card
(Secure Digital Card)
high stability and high capacity. It is widely used in various digital products
such as PDAs, digital cameras, MP3 players, cell phones, and notebook PCs. Its
appearance is similar to that of MMC, but the number of pins and their
thickness is different. It also has a password setting function for data security.
Use the up stream terminal when connecting to a PC. This product supports
USB 2.0. An A-mini B type cable which is used to connect your digital photo
USB Cable
frame to a PC is provided with the product. The A type is the USB connector
1) A-mini B type
used to connect to a PC. The B type is the USB connector used to connect to
an external device. You can connect your digital photo frame to a PC using an
A-mini B type USB cable.
USB Cable
2) Cable for Connecting Other Devices
Use this type of cable when using the down stream terminal. This product
supports USB 2.0. When connecting an external device to the down stream
terminal, use the USB cable provided with the external device.
|
| Troubleshooting |
Terminology
|
Service Centers
Service Centers
If you need a product service, contact or visit a Samsung service center.
For services for network connection and the Server.
Services
Samsung Electronics web site
Contacts
http://www.samsung.com
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care center.
North America
U.S.A
1-800-SAMSUNG (7267864)
http://www.samsung.com/us
CANADA
1-800-SAMSUNG (7267864)
http://www.samsung.com/ca
MEXICO
01-800-SAMSUNG (7267864)
http://www.samsung.com/mx
Latin America
ARGENTINE
BRAZIL
0800-333-3733
http://www.samsung.com/ar
0800-124-421
http://www.samsung.com
4004-0000
CHILE
800-SAMSUNG(726-7864)
http://www.samsung.com/cl
COLOMBIA
01-8000112112
http://www.samsung.com/co
COSTA RICA
0-800-507-7267
http://www.samsung.com/latin
ECUADOR
1-800-10-7267
http://www.samsung.com/latin
EL SALVADOR
800-6225
http://www.samsung.com/latin
GUATEMALA
1-800-299-0013
http://www.samsung.com/latin
HONDURAS
800-7919267
http://www.samsung.com/latin
JAMAICA
1-800-234-7267
http://www.samsung.com/latin
NICARAGUA
00-1800-5077267
http://www.samsung.com/latin
PANAMA
800-7267
http://www.samsung.com/latin
PUERTO RICO
1-800-682-3180
http://www.samsung.com/latin
REP. DOMINICA
1-800-751-2676
http://www.samsung.com/latin
TRINIDAD & TOBAGO
1-800-SAMSUNG(726-7864)
http://www.samsung.com/latin
VENEZUELA
0-800-100-5303
http://www.samsung.com/latin
Europe
AUSTRIA
0800-SAMSUNG(726-7864)
http://www.samsung.com/at
|
BELGIUM
02 201 2418
http://www.samsung.com/be
CZECH REPUBLIC
800-726-786 (800 - SAMSUNG)
http://www.samsung.com/cz
DENMARK
70 70 19 70
http://www.samsung.com/dk
EIRE
0818 717 100
http://www.samsung.com/ie
FINLAND
030-6227 515
http://www.samsung.com/fi
FRANCE
GERMANY
3260 SAMSUNG (€ 0,15/Min)
08 25 08 65 65 (€ 0,15/Min)
01805 -SAMSUNG(726-7864)
(€ 0,14/Min)
http://www.samsung.com/fr
http://www.samsung.de
HUNGARY
06-80-SAMSUNG(726-7864)
http://www.samsung.com/hu
ITALIA
800-SAMSUNG(726-7864)
http://www.samsung.com/it
LUXEMBURG
02 261 03 710
http://www.samsung.com/lu
NETHERLANDS
0900-SAMSUNG (726-7864 € 0,10/Min)
http://www.samsung.com/nl
NORWAY
815-56 480
http://www.samsung.com/no
POLAND
0 801 801 881
http://www.samsung.com/pl
022-607-93-33
PORTUGAL
80820-SAMSUNG(726-7864)
http://www.samsung.com/pt
SLOVAKIA
0800-SAMSUNG (7267864)
http://www.samsung.com/sk
SPAIN
902-1-SAMSU(72678)
http://www.samsung.com/es
SWEDEN
0771-400 200
http://www.samsung.com/se
SWITZERLAND
0800-SAMSUNG(726-7864)
http://www.samsung.com/ch
U.K
0845 SAMSUNG (7267864)
http://www.samsung.com/uk
CIS
ESTONIA
800-7267
http://www.samsung.ee
LATVIA
8000-7267
http://www.samsung.com/lv
LITHUANIA
8-800-77777
http://www.samsung.lt
KAZAKHSTAN
8-10-800-500-55-500
http://www.samsung.kz
KYRGYZSTAN
00-800-500-55-500
RUSSIA
8-800-555-55-55
TADJIKISTAN
8-10-800-500-55-500
UKRAINE
8-800-502-0000
http://www.samsung.ua
UZBEKISTAN
8-10-800-500-55-500
http://www.samsung.com/kz_ru
http://www.samsung.ru
Asia Pacific
AUSTRALIA
1300 362 603
http://www.samsung.com/au
800-810-5858
CHINA
400-810-5858
010-6475 1880
http://www.samsung.com/cn
HONG KONG : 3698-4698
http://www.samsung.com/hk
3030 8282
INDIA
http://www.samsung.com/in
1800 110011
1-800-3000-8282
INDONESIA
0800-112-8888
http://www.samsung.com/id
JAPAN
0120-327-527
http://www.samsung.com/jp
MALAYSIA
1800-88-9999
http://www.samsung.com/my
NEW ZEALAND
0800 SAMSUNG (0800 726 786)
http://www.samsung.com/nz
PHILIPPINES
1800-10-SAMSUNG(726-7864)
http://www.samsung.com/ph
SINGAPORE
1800-SAMSUNG(726-7864)
http://www.samsung.com/sg
THAILAND
1800-29-3232
http://www.samsung.com/th
02-689-3232
TAIWAN
0800-329-999
http://www.samsung.com/tw
VIETNAM
1 800 588 889
http://www.samsung.com/vn
Middle East & Africa
SOUTH AFRICA
0860-SAMSUNG(726-7864)
http://www.samsung.com/za
TURKEY
444 77 11
http://www.samsung.com/tr
U.A.E
800-SAMSUNG (726-7864)
8000-4726
http://www.samsung.com/ae
Download PDF

advertising