Samsung | DVD-E238S | Samsung DVD-E138A 사용자 매뉴얼

E138A 00141X(Cover)XSS
4/22/03 2:12 PM
Page 2
DVD PLAYER
DVD-E138A
DVD-1010
DVD-E138B
DVD-E238
DVD-E338K
DVD-P538K
ENG
AK68-00141X
E138A 00141X-1(GB)XSS
4/22/03 2:11 PM
Page 2
Precautions
Precautions
1. Setting
Setting up
up
1
Ensure that the mains supply in your house complies with that indicated on the identification sticker
located at the back of your play. Install your player horizontally, on a suitable base (furniture),
with enough space around it for ventilation (7~10cm). Make sure the ventilation slots are not
covered. Do not stack other, or heavy devices on top of the player. Do not place the player on
amplifiers or other equipment which may become hot. Before moving the player ensure the disc
tray is empty. This player is designed for continuous use.
Switching off the DVD player to the stand-by mode does not disconnect the electricity supply In
order to separate the player completely from the mains,it has to be disconnected by unplugging the
main plug, especially when left unused for a long period of time.
1. For
Setting
2.
yourup
safety
Never open the player or any of its components. It can be dangerous for you or certain fragile
components. You could receive an electric shock or touch the laser beam. Do not place your eyes
close to the opening of the disc tray or any other opening to look inside the player.
1. Caution
Setting up
3.
Protect the player from moisture (dripping or splashing and objects filled with liquids), and excess
heat (e.g.fireplace) or equipment creating strong magnetic or electric fields (i.e.speakers...).
Disconnect the power cable from the mains electricity supply if the player malfunctions.
Your player is not intended for industrial use but for domestic purposes only. Use of this product is
for personal use only. If your player or disc has been stored in a cold atmosphere for example
during transportation in the winter, wait for approximately 2 hours until they have reached room
temperature, before use.
2
3
4
5
1. Disc
Setting up
4.
Be careful handle your discs with care. Hold a disc with finger on the border or hole. Always place
disc with the label facing upward (in case of a single side disc). Always use a soft cloth to clean
disc if necessary, wipe from the centre to the border. Always put disc back into their cases after
playing and store in vertical position. Always place the disc properly into the tray using the proper
guide area. Never use record cleaning sprays, benzine, static electricity liquids or any other solvent,
if the disc surface is dirty. Wipe gently with a soft damp (water only) cloth, never wipe the disc in a
circular motion, since circular scratches are likely to occur and could cause noise during playback.
1. Environmental
Setting up
5.
info
Batteries: The battery used in this product contains chemicals that are harmful to the environment.
Do not dispose of batteries in the general domestic waste. It is recommended that the replacement
of the battery should be done by a technician.
Disposal of old equipment and packaging: Old equipment and packaging should not be disposed of
as domestic waste, but in accordance with the appliable regulations.
6. Maintenance of Cabinet
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.
• Do not use benzene, thinner, or other solvents for cleaning.
• Wipe the cabinet with a soft cloth.
2
3
E138A 00141X-1(GB)XSS
4/22/03 2:11 PM
Page 4
Before you start
Table of contents
SETUP
Setup
CONNECTIONS
General Features ........................................................................................................6
Disc Type and Characteristics ......................................................................................7
Description-Front Panel ................................................................................................8
Display Indicators ....................................................................................................10
Description-Rear Panel ..............................................................................................11
Tour of the Remote Control ........................................................................................14
Accessories
Connections
Choosing a Connection ..............................................................................................20
Remote Control
Basic Functions
Playing a Disc ............................................................................................................23
Using the Search & Skip Functions ..........................................................................25
Using the Display Function ........................................................................................26
Using the Disc and Title Menu ..................................................................................27
Using the Function Menu ..........................................................................................28
Repeat Play ................................................................................................................29
BASIC
FUNCTIONS
Batteries for
Remote Control (AA Size)
Advanced Functions
Install Batteries in the
Remote
3 Replace the battery cover.
• Check the polarity + - of the
batteries (Dry-Cell)
• Check if the batteries are drained.
• Check if remote sensor is blocked
by obstacles.
• Check if there is any fluorescent
lighting nearby.
Karaoke Functions
Beginning Karaoke Functions ..................................................................................44
Reserving a Song ......................................................................................................45
Vocal Function ..........................................................................................................46
CHANGING
SETUP MENU
correctly.
If remote doesn’t operate
properly:
Adjusting the Aspect Ratio (EZ View) ........................................................................30
Slow Repeat play ........................................................................................................32
Selecting the Audio Language ....................................................................................33
Selecting the Subtitle Language ................................................................................34
Changing the Camera Angle ......................................................................................35
Using the Instant Replay/Skip Function ....................................................................36
Using the Bookmark Function ....................................................................................37
Using the Zoom & 3D Sound Functions..........................................................................38
MP3/WMA Play ..........................................................................................................39
Program Play & Random Play ....................................................................................41
Picture CD Playback ..................................................................................................42
KARAOKE
FUNCTIONS
the battery cover on the back of
1 Open
the remote.
two AA batteries. Make sure that
2 Insert
the polarities (+ and -) are aligned
Video/Audio Cable
ADVANCED
FUNCTIONS
User’s Manual
Changing Setup menu
REFERENCE
Using the Setup Menu ................................................................................................47
Setting Up the Language Features ............................................................................48
Setting Up the Audio Options ....................................................................................50
Surround Sound Speaker Setup ..............................................................................51
Setting Up the Display Options ..................................................................................52
Setting Up the Parental Control..................................................................................54
Controlling a TV with the remote ..............................................................................55
Reference
Troubleshooting ..........................................................................................................56
Specifications ..............................................................................................................57
4
5
E138A 00141X-1(GB)XSS
4/22/03 2:11 PM
Page 6
General Features
Screen
Video with MPEG-2 compression technology.
Both regular and widescreen(16:9) pictures
can be viewed.
Slow Motion
An important scene can be viewed in slow
motion.
Programmed Play
You can program tracks to play in desired
order. (CD, WMA, MP3)
Parental Control
The parental control allows users to set the
level necessary to prohibit children from
viewing harmful movies such as those with
violence, adult subject matter, etc.
Various On-Screen Menu Functions
You can select various languages
(Audio/Subtitle) and screen angles while
enjoying movies.
Easy View
Easy View can convert Letter Box images to
full screen viewing on your conventional TV.
Digital Photo Viewer (JPEG)
You can view the Digital Photos on your TV.
Repeat
You can repeat a song or movie simply by
pressing the REPEAT button.
MP3/WMA
This unit can play discs created from
MP3/WMA files.
This DVD player is capable of playing the following types of discs with the
corresponding logos:
Disc Types
(Logos)
Recording Disc Size
Max.
Playing Time
Types
DVD
12 Cm
Audio
+
Video
Instant Replay
This function is used to replay the previous
10 seconds of the movie from the current
position.
Instant Skip
This function skips playback ahead 10 seconds.
8 Cm
VIDEO-CD
12 Cm
Audio
+
Video
Progressive Scan (DVD-P538K Only)
Progressive scanning creates an improved
picture with double the scan lines of a
conventional interlaced picture.
NOTE
SETUP
Excellent Sound
Dolby Digital, a technology developed by
Dolby Laboratories provides crystal clear
sound reproduction.
Disc Type and Characteristics
AUDIO-CD
Single-sided • DVD contains excellent
240 min.
sound and video due to
Double-sided
Dolby Digital and MPEG-2
480 min.
system.
Single-sided • Various screen and audio
functions can be easily
80 min.
Double-sided selected through the onscreen menu.
160 min.
74 min.
• Video with CD sound, VHS
quality & MPEG-1
compression technology.
8 Cm
20 min.
12 Cm
74 min.
8 Cm
20 min.
* Discs which cannot be played with this player.
Audio
• DVD-ROM
• DVD-RAM
• CD-ROM
• CDV
• CDI
• HD layer of super Audio CD
• CDGs play audio only, not graphics.
Characteristics
• CD is recorded as a
Digital Signal with better
audio quality, less
distortion and less
deterioration of audio
quality over time.
* Ability to play back may depend on recording conditions.
• DVD-R, +R
• DVD+RW, -RW
• CD-RW
Disc Markings
~
COPY PROTECTION
• Many DVD discs are encoded with copy protection. Because of this, you should only connect your
DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from
copy-protected DVD discs.
• This product incorporates copyright protection technology that is protected by methods claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
6
• Play
Region
Number
PAL
• PAL broadcast • Dolby
system in U.K, Digital disc
France,
Germany, etc.
STEREO
DIGITAL
SOUND
• Stereo disc • Digital
Audio disc
• DTS disc
• MP3 disc
Play Region Number
Both the DVD player and the discs are coded by region. These regional codes must match in order for the
disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is described on the rear panel of the player.
7
E138A 00141X-1(GB)XSS
4/22/03 2:11 PM
Page 8
Description-Front Panel
Description-Front Panel
7
6
1
SETUP
DVD-E138A/DVD-1010
DVD-P538K
8 9 10 11
12
1
2 3 4 5
6
7
8 910 11 12
13
DVD-E138B
Front Panel Controls
1. STANDBY/ON
• When the unit is first plugged in, the indicator lights. When STANDBY/ON is pressed on again,
the light goes out and the player is turned on.
2. MIC 1
• Connect microphone 1 for Karaoke functions.
7
6
1
8 9 10 11
12
3. MIC 2
• Connect microphone 2 for Karaoke functions.
4. VOLUME
• Use to adjust microphone volume level.
DVD-E238
5. DIGITAL ECHO
• Use to adjust echo delay.
6. DISC TRAY
• Load the disc here.
7. DISPLAY
• Operation indicators are displayed here.
8. OPEN/CLOSE
• Press to open and close the disc tray.
6
1
7
8 9 10 11
12
DVD-E338K
9. PLAY/PAUSE (
)
• Begin or pause disc play.
10. STOP (
)
• Stops disc play.
11. SKIP (
/
)
• Use to skip a scene or music.
12. EZ VIEW
• Easy View can convert Letter Box images to full screen viewing on your conventional TV.
13. SHUTTLE
• Use during DVD and CD play to fast forward or reverse.
1
8
2 3 4 5
6
7
8 9 10 11
12
9
E138A 00141X-1(GB)XSS
4/22/03 2:11 PM
Page 10
Display Indicators
Description-Rear Panel
SETUP
DVD-P538K
1
2
3
Front Panel Display
1. Disc type indicators
2. Play / Pause / Forward play
3. Displays various messages concerning operations such as
PLAY, STOP, LOAD ...
no DISC : No disc loaded.
OPEN : The disc tray is open.
LOAD : Player is loading disc information.
1
2
3
4
5
6
7
Rear Panel
1. DIGITAL AUDIO OUT JACKS
• Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver.
Use to connect to an A/V Amplifier that contains a Dolby Digital or DTS decoder.
2. 5.1CH ANALOG AUDIO OUT JACKS
• Connect to an amplifier with 5.1ch analog input jacks.
3. MIXED AUDIO OUT JACKS
• Connect to the Audio input jacks of your television, audio/video receiver.
4. VIDEO OUT JACK
• Use a video cable to connect to the Video input jack on your television.
• The VIDEO OUT SELECT switch must be set to the 525i(480i) or S-VIDEO position.
5. S-VIDEO OUT JACK
• Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher quality picture.
• The VIDEO OUT SELECT switch must be set to the S-VIDEO position.
6. COMPONENT VIDEO OUT JACKS
• Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr, Pb and Y
video. Along with S-Video, Component Video provides the best picture quality.
• If 525P(480P) VIDEO is selected, progressive scan mode will work.
• If 525i(480i) VIDEO is selected, interlaced scan mode will work.
7. VIDEO OUT SELECT SWITCH
• Use this switch to set video out.
• If 525P(480P) VIDEO is selected, VIDEO and S-VIDEO will not work.
Important Note
10
• Consult your TV User’s Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV User’s Manual’s instructions regarding
Progressive Scan settings in the TV’s menu system.
• If 525P(480P) VIDEO OUT is selected, VIDEO and S-VIDEO will not work.
• Select the VIDEO OUT SELECT switch in the Stop or Power Off mode.
• Only NTSC discs can be played with Progressive scan.
11
E138A 00141X-1(GB)XSS
4/22/03 2:11 PM
Page 12
Description-Rear Panel
Description-Rear Panel
SETUP
DVD-E138A/DVD-1010/DVD-E138B/DVD-E238
Rear Panel
1. DIGITAL AUDIO OUT JACKS
• Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver.
Use to connect to an A/V Amplifier that contains a Dolby Digital or DTS decoder.
2. ANALOG AUDIO OUT JACKS
• Connect to the Audio input jacks of your television, audio/video receiver.
3. VIDEO OUT JACKS
• Use a video cable to connect to the Video input jack on your television.
1
2
3
4
5
6
4. S-VIDEO OUT JACK
• Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher
quality picture. The S-Video must be selected in the VIDEO OUT SELECT.
5. COMPONENT VIDEO OUT JACKS
• Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr, Pb and
Y video. Along with S-Video, Component Video provides the best picture quality.
The COMPONENT must be selected in the VIDEO OUT SELECT.
DVD-E338K
6. VIDEO OUT SELECT SWITCH
• Use the switch to set video out. If COMPONENT is selected, S-Video may not work. If S-Video is
selected, COMPONENT may not work.
1
2
3
4
5
6
NOTE
* Select the VIDEO OUT SELECT switch in the Stop or Power Off mode.
12
13
E138A 00141X-1(GB)XSS
4/22/03 2:11 PM
Page 14
Tour of the Remote Control
Tour of the Remote Control
SETUP
DVD-E138A/DVD-1010/DVD-E138B/DVD-E238
DVD Function Buttons
1
13
1. DVD POWER Button
16. PLAY/PAUSE Button (
• Turns the power on or off.
2. NUMBER Buttons
2
17. SKIP Buttons (
• This function is used to replay the previous 10
seconds of the movie from the current position.
9
14
5. EZ VIEW Button
15
6. SEARCH Buttons (
• Easy View can convert Letter Box images to full
screen viewing on your conventional TV.
/
)
• Allows you to search forward/backward through a
disc.
16
17
18
7. STOP Button (
19
20
9. TITLE MENU Button
)
8. DISC MENU Button
• Brings up the Disc menu.
• Brings up the Title menu.
10. CLEAR Button
• Use to remove menus or status displays from the
screen.
11. BOOKMARK Button
10
11
12
14
21
12. MENU Button
22
23
24
13. OPEN/CLOSE Button
25
26
27
)
18. RETURN Button
• Returns to a previous menu.
4. I.REPLAY Button
8
/
• Use to skip the title, chapter, or track.
3. STEP Button
• Advances play one frame at a time.
3
4
5
6
7
)
• Begin/Pause disc play.
• Brings up the DVD player’s setup menu.
19. INFO Button
• Displays the current disc mode.
20. ENTER/DIRECTION Button
(UP/DOWN or LEFT/RIGHT Buttons)
• This button functions as a toggle switch.
21. ANGLE Button
• Use to access various camera angles on a DVD.
22. MODE Button
• Allows you to program a specific order.
23. SUBTITLE Button
24. AUDIO Button
• Use this button to access various audio functions on
a disc.
25. REPEAT A-B Button
• Use to mark a segment to repeat between A and B.
26. REPEAT Button
• Allows you to repeat play a title, chapter, track, or
disc.
27. ZOOM Button
• Enlarges the DVD picture.
• To open and close the disc tray.
14. 3D Button
15. I.SKIP Button
• This function skips playback ahead 10 seconds.
15
E138A 00141X-1(GB)XSS
4/22/03 2:11 PM
Page 16
Tour of the Remote Control
Tour of the Remote Control
DVD Function Buttons
1. DVD POWER Button
1
13
16. PLAY/PAUSE Button (
• Turns the power on or off.
17. SKIP Buttons (
• Advances play one frame at a time.
• This function is used to replay the previous 10
seconds of the movie from the current position.
8
9
5. EZ VIEW Button
• Easy View can convert Letter Box images to full
screen viewing on your conventional TV.
6. SEARCH Buttons (
/
)
• Allows you to search forward/backward through a
disc.
16
17
18
7. STOP Button (
19
20
9. TITLE MENU Button
)
8. DISC MENU Button
• Brings up the Disc menu.
• Brings up the Title menu.
10. CLEAR Button
• Use to remove menus or status displays from the
screen.
11. BOOKMARK Button
21
10
11
12
16
22
23
24
25
26
27
)
18. RETURN Button
• Returns to a previous menu.
4. I.REPLAY Button
15
/
• Use to skip the title, chapter, or track.
3. STEP Button
14
)
• Begin/Pause disc play.
2. NUMBER Buttons
2
3
4
5
6
7
SETUP
DVD-E338K
12. MENU Button
• Brings up the DVD player’s setup menu.
13. OPEN/CLOSE Button
19. INFO Button
• Displays the current disc mode.
20. ENTER/DIRECTION Button
(UP/DOWN or LEFT/RIGHT Buttons)
• This button functions as a toggle switch.
21. ANGLE Button
• Use to access various camera angles on a DVD.
22. MODE Button
• Allows you to program a specific order.
23. SUBTITLE Button
24. AUDIO Button
• Use this button to access various audio functions on
a disc.
25. KARAOKE Button
• Use to begin Karaoke functions.
26. REPEAT Button
• Allows you to repeat play a title, chapter, track, or
disc.
27. ZOOM Button
• Enlarges the DVD picture.
• To open and close the disc tray.
14. 3D Button
15. I.SKIP Button
• This function skips playback ahead 10 seconds.
17
E138A 00141X-1(GB)XSS
4/22/03 2:11 PM
Page 18
Tour of the Remote Control
Tour of the Remote Control
SETUP
DVD-P538K
DVD Function Buttons
1
18
2
19
3
1. DVD POWER Button
• Turns the power on or off.
2. ZOOM Button
• Enlarges the DVD picture.
5
6
7
8
9
21
22
23
24
10
25
26
4. MENU Button
22. CHANNEL Buttons
• This function skips playback ahead 10 seconds.
6. TV/VIDEO Button
27
• This function is used to replay the previous 10
seconds of the movie from the current position.
13
14
15
28
29
30
31
32
25. SKIP Buttons (
/
)
• Use to skip the title, chapter, or track.
26. RETURN Button
8. EZ VIEW Button
• Easy View can convert Letter Box images to full
screen viewing on your conventional TV.
)
10. DISC MENU Button
11. TITLE MENU Button
• Brings up the Title menu.
12
)
• Begin/Pause disc play.
7. I.REPLAY Button
9. STOP Button (
23. I.SKIP Button
24. PLAY/PAUSE Button (
• Brings up the Disc menu.
11
20. 3D Button
21. OPEN/CLOSE Button
5. VOLUME Buttons
20
19. SLOW Button
3. NUMBER Buttons
• Brings up the DVD player’s setup menu.
4
18. TV POWER Button
12. ENTER/DIRECTION Button
(UP/DOWN or LEFT/RIGHT buttons)
• This button functions as a toggle switch.
13. CLEAR Button
• Use to remove menus or status displays from the
screen.
• Returns to a previous menu.
27. INFO Button
• Displays the current disc mode.
28. ANGLE Button
• Use to access various camera angles on a DVD.
29. MODE Button
• Allows you to program a specific order.
30. SUBTITLE Button
31. AUDIO Button
• Use this button to access various audio functions on
a disc.
32. KARAOKE Button
• Use to begin Karaoke functions.
14. BOOKMARK Button
15. REPEAT Button
16
17
• Allows you to repeat play a title, chapter, track, or
disc.
16. JOG DIAL
• Operates frame by frame play. In CD mode,
performs track search.
17. SHUTTLE DIAL
• Performs fast motion play.
18
19
E138A 00141X-1(GB)XSS
4/22/03 2:11 PM
Page 20
Choosing a Connection
Choosing a Connection (DVD-P538K only)
The following show examples of connections commonly used to connect the DVD player
with a TV and other components.
Connection to a TV (For Video)
• Always turn off the DVD player, TV, and other components before you
connect or disconnect any cables.
• Refer to the owner’s manual of the additional components you are connecting for
more information on those particular components.
Basic Audio
Method 1
Method 2
Method 3
Method 4
Good
picture
Better
picture
Best
picture
Optimum
picture
CONNECTIONS
TV (Normal, Widescreen, Projection, etc..)
Before Connecting the DVD Player
TV
Connection to an Audio System
Method 1
Method 2
Method 3
AV Cable
S-Video
Cable
Video Cables
OR
OR
AUDIO
SYSTEM
2ch Amplifier
5.1ch Analog Amplifier
Dolby Digital Decoder
Audio Input Jacks
Audio Input Jacks
Digital Audio Input Jacks
DVD
PLAYER
Audio Output Jacks
OR
DVD
PLAYER
e.g) DVD-P538K
Mixed Audio Out
Analog Audio Out
Video Output Jack
S-Video Jack
Component Video Jacks
Component Video Jacks
Method 1
DVD Player + TV with Video Input Jack
(The VIDEO OUT SELECT switch must be set to the S-VIDEO position.)
Method 2
DVD Player + TV with S-Video Input Jack
(The VIDEO OUT SELECT switch must be set to the S-VIDEO position.)
Method 3
DVD Player + TV with Component Video Jacks
(The VIDEO OUT SELECT switch must be set to the 525i(480i) position.)
Method 4
DVD Player + TV with Progressive Scan Jacks.
(The VIDEO OUT SELECT switch must be set to the 525P(480P) position).
• If 525P(480P) VIDEO OUT is selected, VIDEO and S-VIDEO will not work.
• Depending on your TV, your hookup for Method 4 may differ from the illustration.
Digital Audio Out
Important Note
Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive
Scan is supported, follow the TV User’s Manual’s instructions regarding Progressive Scan settings
in the TV’s menu system.
Only NTSC discs can be played with Progressive scan.
20
21
E138A 00141X-1(GB)XSS
4/22/03 2:11 PM
Page 22
Choosing a Connection
Playing a Disc
(DVD-E138A/DVD-1010/DVD-E138B/DVD-E238/DVD-E338K only)
Before Play
Connection to a TV (For Video)
TV (Normal, Widescreen, Projection, etc..)
Basic Audio
Method 1
Method 2
Method 3
Good
picture
Better
picture
Best
picture
• Turn on your TV and press the TV/VIDEO button to select the video
mode.
• Turn on your Audio System and select AUX, CD or DVD.
After plugging in the player, the first time you press the DVD
POWER button, this screen comes up :
If you want to select the language, press a NUMBER button.
(This screen will only appear the very first time you plug in the player.)
BASIC
FUNCTIONS
TV
AV Cable
S-Video
Cable
OR
Video Cables
Play
1 Press the OPEN/CLOSE button.
a disc gently into the tray with the disc’s label
2 Place
facing up.
OR
The STANDBY indicator light goes out and the tray opens.
R2
L2
the PLAY/PAUSE (
3 Press
button to close the disc tray.
DVD
PLAYER
) button or OPEN/CLOSE
1
R1
e.g) DVD-E338K
L1
Audio
Output
MIXED AUDIO
OUT
Jacks
Video Output
Jack
S-Video Jack
Component Video
Jacks
4 Stopping Play
5 Removing Disc
6 Pausing Play
Press the STOP (
) button during play.
Press the OPEN/CLOSE button.
Method 1
DVD Player + TV with Video Input Jack
Method 2
DVD Player + TV with S-Video Input Jack
(If S-Video is selected in the VIDEO OUT SELECT.)
Method 3
DVD Player + TV with Component Video Jacks
(If COMPONENT is selected in the VIDEO OUT SELECT.)
Press the PLAY/PAUSE (
) or STEP button on the remote during play.
- Screen stops, no sound.
- To resume again, press PLAY/PAUSE (
) button once again.
NOTE
• If COMPONENT is selected, S-Video will not work.
• If S-Video is selected, COMPONENT will not work.
22
23
E138A 00141X-1(GB)XSS
4/22/03 2:11 PM
Page 24
Playing a Disc
7 Step Motion Play (Except CD)
DVD-P538K : If turning Jog Dial, you can view one by one.
DVD-E138A/DVD-1010/DVD-E138B/DVD-E238/DVD-E338K : Press the STEP button on the remote
during play.
- Each time the button is pressed, a new frame will appear.
- No sound is heard during STEP mode.
- Press PLAY/PAUSE (
) to resume normal play.
(You can only perform step motion play in the forward direction.)
Using the Search & Skip Functions
During play, you can search quickly through a chapter or track or use the skip
function to jump to the next selection.
Searching through a Chapter or Track
1
DVD-E138A/DVD-1010/DVD-E138B/DVD-E238/DVD-E338K : Press the
button on the remote
during PAUSE or STEP mode. By pressing the
button, you can select slow motion play for 1/8, 1/4
or 1/2 of normal speed.
DVD-P538K : Press and hold the
button to choose the play speed between 1/8X, 1/4X and 1/2X of
normal during PAUSE or STEP mode, or press the SLOW button you can play slow motion for 1/8 of
normal speed.
- No sound is heard during slow mode.
- Press PLAY/PAUSE (
) to resume normal play.
- When playing a DVD/VCD, reverse slow motion play will not work.
RESUME function
When you stop disc play, the player remembers where you stopped, so when you press PLAY (
) again,
it will pick up where you left off. (unless the disc is removed, the STOP (
) button is pressed twice or the
player is unplugged.)
NOTE
• If the player is left for 5 minutes in pause mode, it will stop.
• If the player is left in the stop mode for more than 30 minutes, the power will automatically shut off.
(Automatic Power-Off Function) (DVD-E138A/DVD-1010/DVD-E138B/DVD-E238 only)
• If the player is left in the stop mode for more than one minute without any user interaction, a screen
saver will be activated, and the TV screen will fade in and out repeatedly. Press the PLAY (
)
button to resume normal play.
• This
icon indicates an invalid button press.
24
button on
DVD-P538K : Turn the shuttle dial of remote control during disc play.
BASIC
FUNCTIONS
8 Slow Motion Play (Except CD)
DVD-E138A/DVD-1010/DVD-E138B/DVD-E238/DVD-E338K : Press the
or
the remote and press again to search at a faster speed on the DVD, VCD, CD.
Turn the shuttle dial on the front can a multiple-speed operation if desiring to use the key on
the front.
DVD 2X, 4X, 8X, 16X, 32X, 128X
VCD 4X, 8X
CD
2X, 4X, 8X
Skipping Tracks
1 During play, press the
or
button.
• When playing a DVD, if you press the
button, it moves to the next chapter.
If you press the
button, it moves to the beginning of the chapter.
One more press makes it move to the beginning of the previous chapter.
• When playing a VCD 2.0 in MENU OFF mode, a VCD 1.1 or a CD, if you
press the
button, it moves to the next track. If you press the
button,
it moves to the beginning of the track.
One more press makes it move to the beginning of the previous track.
• If a track exceeds 15 minutes when playing a VCD and you press the
button, it moves forward 5 minutes. If you press the
button, it moves
backward 5 minutes.
25
E138A 00141X-1(GB)XSS
4/22/03 2:11 PM
Page 26
Using the Display Function
Using the Disc and Title Menu
When Playing a DVD/VCD/CD
1 During play, press the INFO button on the remote.
the UP/DOWN buttons to select the desired
2 Use
item.
Using the Disc Menu
the playback of a DVD disc, press the
1 During
MENU button on the remote.
DVD
Title
01
Chapter 02
Time
0:00:13
2
Select Disc Menu using the UP/DOWN buttons,
then press the RIGHT or ENTER button.
ENG 5.1CH
Audio
the LEFT/RIGHT buttons to make the desired
3 Use
setup, then press ENTER.
DVD
Disc Menu
DVD
Function
Setup
ENTER
Subtitle Off
RETURN
MENU
Off
• You may use the number buttons of the remote control to
directly access a title, chapter or to start the playback from
the desired time.
BASIC
FUNCTIONS
3D Sound
Press ENTER key
for Disc Menu
Title Menu
ENTER
VCD
4
To make the screen disappear, press the INFO
button again.
VCD
Track 01
Time 0 : 0 0 : 4 8
To access the desired title when there is more than
Title one in the disc. For example, if there is more than one
3D Sound
ENTER
movie on a DVD, each movie will be identified.
Most of DVD discs are recorded in chapters so that
Chapter you can quickly find a specific passage. (similar to
tracks on an audio CD).
Allows playback of the film from a desired time.
Time You must enter the starting time as a reference.
Using the Title Menu
Off
the playback of a DVD disc, Press the
1 During
MENU button on the remote.
DVD
Disc Menu
Press ENTER key
for Title Menu
Title Menu
Title Menu using the UP/DOWN buttons,
2 Select
then press the RIGHT or ENTER button.
CD
Function
Setup
ENTER
RETURN
MENU
CD
Track 01
Refers to the language of the film soundtrack. In the
Audio example, the soundtrack is played in English 5.1CH.
A DVD disc can have up to eight different
soundtracks.
Time 0 : 0 0 : 4 8
3D Sound
Off
ENTER
Refers to the subtitle languages available in the disc.
Subtitle You will be able to choose the subtitles language or, if
you prefer, turn them off from the screen. A DVD disc
can have up to 32 different subtitles.
A surround sound effect is generated using only two
3D Sound front speakers.
NOTE
* When in VCD 2.0 mode (MENU ON mode), this function does not work.
Using DISC MENU button in VCD 2.0, select Menu On/Off.
26
NOTE
• Depending on the disc, the Title and Disc Menus may not work.
• Title Menu will only be displayed if there are at least two titles in the disc.
• You can also use the Title Menu and the Disc Menu, using the TITLE MENU and the DISC MENU buttons
on the remote.
• In VCD2.0, the DISC MENU button works as a conversion switch between Menu On and Menu Off mode.
27
E138A 00141X-1(GB)XSS
4/22/03 2:11 PM
Page 28
Using the Function Menu
Repeat Play
Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc.
Using the Function Menu
1 Press the MENU button during playback.
the UP/DOWN buttons to highlight Function,
2 Use
then press the RIGHT or ENTER button.
DVD
Disc Menu
Info
When playing a DVD
Zoom
Title Menu
Function
Bookmark
DVD
Repeat
EZ View
selection screen appears, Info, Zoom,
3 Function
Bookmark, Repeat and EZ View.
ENTER
Info (See Page 26)
Zoom (See Page 38)
Bookmark (See Page 37)
Repeat (See Page 29)
EZ View (See Page 30~31)
the UP/DOWN button to highlight one of the 5
4 Use
functions. Then press the RIGHT or ENTER button
to access the function.
RETURN
MENU
1
Off
Of
Chapter Title A - B
ENTER
Track Disc A - B
ENTER
BASIC
FUNCTIONS
-
Setup
Press the REPEAT button on the remote.
Repeat screen appears.
Chapter, Title or A-B using the
2 Select
LEFT/RIGHT buttons.
* REPEAT A-B
• Press the REPEAT button. Select A-B on screen with the
LEFT/RIGHT buttons or press the REPEAT A-B (DVDE138A/DVD-1010/DVD-E138B/DVD-E238 only) button on
the remote.
• Press ENTER at the point where you want the repeat play to
start (A). The B is automatically highlighted.
• Press ENTER at the point where you want the repeat play to
stop (B).
• To terminate the function, press the CLEAR button or the
REPEAT A-B (DVD-E138A/DVD-1010/DVD-E138B/
DVD-E238 only) button again.
• A-B REPEAT does not allow you to set point (B) until at least
5 seconds has elapsed after point (A) has been set.
VCD/CD
Off
Of
3 Press ENTER.
to normal play, press REPEAT again,
4 Tothenreturn
press the LEFT/RIGHT buttons to select Off.
Press ENTER, then press the PLAY/PAUSE(
button.
NOTE
• You can also directly select these functions using thier respective buttons on the remote.
28
)
NOTE
• DVD repeats play by chapter or title, CD and VCD repeat play by disc or track.
• Depending on the disc, the Repeat function may not work.
• When in VCD 2.0 mode (MENU ON mode), this function does not work.
29
E138A 00141X-1(GB)XSS
4/22/03 2:11 PM
Page 30
Adjusting the Aspect Ratio (EZ View)
To play back using aspect ratio (DVD)
1 Press the EZ VIEW button.
• The screen size changes when the button is pressed repeatedly.
• The screen zoom mode operates differently depending on the screen
setting in the initial setup menu.
• To ensure correct operation of the EZ VIEW button, you should set the
correct aspect ratio in the initial setup (See page 53).
For 16:9 aspect ratio discs
• Wide Screen
Displays the content of the DVD title in 16:9 aspect ratio.
• Screen Fit
The top and bottom of the screen are cut off. When playing a
2.35:1 aspect ratio disc, the black bars at the top and bottom of the
screen will disappear. The picture will look vertically stretched.
(Depending on the type of disc, the black bars may not disappear
completely.)
• Zoom Fit
The top, bottom, left and right of the screen are cut off and the central
portion of the screen is enlarged.
For 4:3 aspect ratio discs
• Normal Wide
Displays the content of the DVD title in 16:9 aspect ratio. The picture
will look horizontally stretched.
• Screen Fit
The top and bottom of the screen are cut off and the full screen
appears. The picture will look vertically stretched.
If you are using a 4:3 TV
For 16:9 aspect ratio discs
• 4:3 Letter Box
Displays the content of the DVD title in 16:9 aspect ratio.
The black bars will appear at the top and bottom of the screen.
• 4:3 Pan Scan
The left and right of the screen are cut off and displays the central
portion of the 16:9 screen.
• Screen Fit
The top and bottom of the screen are cut off and the full screen
appears. The picture will look vertically stretched.
BASIC
FUNCTIONS
If you are using a 16:9 TV
Adjusting the Aspect Ratio (EZ View)
• Zoom Fit
When a 4:3 DVD is viewed on a 16:9 TV, black bars will appear at
the left and right of the screen in order to prevent the picture from
looking horizontally stretched.
For 4:3 aspect ratio discs
• Normal Screen
Displays the content of the DVD title in 4:3 aspect ratio.
• Screen Fit
The top and bottom of the screen are cut off and the full screen
appears. The picture would look vertically stretched.
• Zoom Fit
The top, bottom, left and right of the screen are cut off and the central
portion of the screen is enlarged.
NOTE
• This function may behave differently depending on the type of disc.
• Zoom Fit
The top, bottom, left and right of the screen are cut off and the central
portion of the screen is enlarged.
• Vertical Fit
When a 4:3 DVD is viewed on a 16:9 TV, black bars will appear at
the left and right of the screen in order to prevent the picture from
looking horizontally stretched.
30
31
E138A 00141X-1(GB)XSS
4/22/03 2:11 PM
Page 32
Slow Repeat play
This feature allows you slowly repeat scenes containing sports, dancing,
musical instruments being played etc. so you can study them more closely.
When playing a DVD
1 During play, press the PLAY/PAUSE ( ) button.
and hold the
button to choose the play speed between 1/8X, 1/4X and
2 Press
1/2X of normal. (DVD-P538K only)
Press the
button to choose the play speed between 1/8X, 1/4X and 1/2X
of normal. (DVD-E138A/DVD-1010/DVD-E138B/DVD-E238/DVD-E338K only)
You can select a desired language quickly and easily with the AUDIO button.
Using the AUDIO button
DVD
1 Press the AUDIO button.
the LEFT/RIGHT buttons to select the
2 Use
desired language on a DVD.
- The audio languages are represented by abbreviations.
the LEFT/RIGHT buttons to select Stereo,
3 Use
LEFT or RIGHT. (On VCD/CD)
VCD/CD
ADVANCED
FUNCTIONS
3
Press the REPEAT or REPEAT A-B(DVD-E138A/DVD-1010/DVD-E138B/DVD-E238
only) button to select the point where the function starts. (A) (See Page 29)
Selecting the Audio Language
the REPEAT or REPEAT A-B(DVD-E138A/DVD-1010/DVD-E138B/DVD-E238
4 Press
only) button to select the point where the function ends. (B) (See Page 29)
NOTE
• The disc will play from A to B repeatedly at the speed you chose.
• To terminate the function, press the CLEAR button or the REPEAT or REPEAT A-B(DVD-E138A/
DVD-1010/DVD-E138B/DVD-E238) button again.
• A-B REPEAT does not allow you to set point (B) until at least 5 seconds has elapsed after point (A) has been set.
32
NOTE
• This function depends on what languages are encoded on the disc and may not work with all DVDs.
• A DVD disc can contain up to 8 audio languages.
• How to have the same audio language come up whenever you play a DVD;
Refer to “Setting Up the Language Features” on page 49.
33
E138A 00141X-1(GB)XSS
4/22/03 2:11 PM
Page 34
Changing the Camera Angle
Selecting the Subtitle Language
You can select a desired subtitle quickly and easily with the SUBTITLE button.
Using the ANGLE button
Using the SUBTITLE button
1 Press the SUBTITLE button.
the LEFT/RIGHT buttons to select the
2 Use
desired subtitle language.
ENG
On
Press the ANGLE button to see if an ANGLE
(
) mark is present at the upper left hand
corner of the screen.
an ANGLE mark is shown, press the
1 When
ANGLE button, then an ANGLE select icon
the UP/DOWN buttons to determine
3 Use
whether or not the subtitle will be displayed.
- Initially, the subtitling will not appear on screen.
- The subtitle languages are represented by abbreviations.
When a DVD contains multiple angles of a particular scene, you can select the Angle
function.
will appear at the upper left hand corner of
the screen.
ENG
Off
ADVANCED
FUNCTIONS
the LEFT/RIGHT buttons to select the
2 Use
desired screen angle.
turn off the display, press the ANGLE
3 Tobutton
again.
Changing the Subtitle color (DVD-P538K only)
the MODE button to change the subtitle
1 Press
color only when the player is in progressive
video mode.
NOTE
• This function depends on what languages are encoded on the disc and may not work with all DVDs.
• A DVD disc can contain up to 32 subtitle languages.
• How to have the same subtitle language come up whenever you play a DVD;
Refer to “Setting Up the Language Features” on page 49.
34
35
E138A 00141X-2(GB)XSS
4/22/03 2:11 PM
Page 36
Using the Instant Replay/Skip Function
Using the Instant Replay function (DVD)
If you miss a scene, you can see it again using
this function.
you press the I.REPLAY button, the current
1 Ifscene
moves backward about 10 seconds,
and plays back.
- Depending on the disc, the Instant Replay
function may not work.
Using the Bookmark Function
This feature lets you bookmark sections of a DVD or VCD (MENU OFF mode) so you can
quickly find them at a later time.
Using the Bookmark Function (DVD/VCD)
play, press the BOOKMARK button on the
1 During
remote. The Bookmark icons will be displayed.
the LEFT/RIGHT buttons to move to the
2 Use
desired bookmark icon.
you reach the scene you want to mark,
3 When
press the ENTER button. The icon will change to
ENTER
a number (1, 2, or 3).
Use this function to skip playback 10 seconds
ahead of the current scene.
1
ADVANCED
FUNCTIONS
Using the Instant Skip function (DVD)
the BOOKMARK button to turn off the
4 Press
display.
Recalling a Marked Scene
Press the I.SKIP button.
play, press the BOOKMARK button
1 During
on the remote.
- Playback will skip ahead 10 seconds.
- Depending on the disc, this feature may not work.
the LEFT/RIGHT buttons to select a
2 Use
marked scene.
the PLAY/PAUSE (
3 Press
to the marked scene.
1 – –
CLEAR
) buttons to skip
Clearing a Bookmark
1
the LEFT/RIGHT buttons to select the
2 Use
bookmark number you want to delete.
the CLEAR button to delete a
3 Press
bookmark number. Press the BOOKMARK
During play, press the BOOKMARK button
on the remote.
NOTE
• Up to three scenes may be marked
at a time.
• When in VCD 2.0 mode (MENU ON
mode), this function does not work.
• Depending on the disc, the
Bookmark function may not work.
button to turn off the display.
36
37
E138A 00141X-2(GB)XSS
4/22/03 2:11 PM
Page 38
Using the Zoom & 3D Sound Functions
MP3/WMA Play
When an MP3/WMA Disc is inserted into the DVD player, the first song file of the first folder
plays.
Using the Zoom Function (DVD)
play or pause mode, press the ZOOM button
1 During
on the remote.
• If more than two file extensions are present, select the media
of your choice by pressing UP/DOWN, then press the ENTER
button.
• To change the currently playing media, press the STOP ( )
button twice and then press the DISC MENU button.
• If no button on the remote controller is pressed for 60 seconds,
the menu will disappear and the selected item will be played.
A zoom mark will be displayed on screen.
the UP/DOWN or LEFT/RIGHT buttons to select
2 Use
the part of the screen you want to zoom in on.
3 Press the ENTER button.
ENTER
MP3/WMA Play Function
- During DVD play, press ENTER to zoom in 2X/4X/2X/Normal in
order.
- During VCD play, press ENTER to zoom in 2X/Normal in order.
the first song file is playing, the music
1 When
folder menu will appear on the right side of the
Using the 3D Sound Function
ENTER
The simulated surround effect depends on the disc
contents. If you connect the unit to your stereo
system, you can enhance sound quality and
produce a greater surround effect.
This feature is useful when you are using the DVD
player with a two channel stereo through the
analog outputs.
(Discs which are recorded with LPCM or DTS will
not work. )
Off
RETURN
ADVANCED
FUNCTIONS
screen.
Up to 8 music folders can be displayed at a
time. If you have more than 8 folders on a
disc, press the LEFT/RIGHT buttons to bring
them up on the screen.
MENU
the UP/DOWN buttons to select the
2 Use
desired music folder, then press ENTER.
Use the UP/DOWN buttons again to select a
song file. Press ENTER to begin playback of
the song file.
Program/Random playback
1
During play, press the 3D button.
The 3D SOUND mark will be displayed on
screen.
the UP/DOWN buttons to turn the
2 Press
3D Sound feature on or off.
NOTE
• 3D Sound is possible only on discs
recorded using DOLBY SURROUND
or DOLBY DIGITAL. However, some
of these discs do not contain rear
channel sound signals.
Press the MODE button to switch between the
PROGRAM and RANDOM modes. See page 41
for more information on these modes.
PROGRAM
RANDOM
• Depending on the disc, the Zoom and
3D Sound functions may not work.
NOTE
• Press the REPEAT button to hear only music continuously and press it once again to release.
• PROGRAM/RANDOM playback cannot be used if the disc contains more than two types of file extensions.
38
39
E138A 00141X-2(GB)XSS
4/22/03 2:11 PM
Page 40
MP3/WMA Play
Program Play & Random Play
Program Play (CD/MP3/WMA)
CD-R MP3/WMA discs
When playing CD-R/MP3 or WMA discs, please follow all the recommendations for CD-R
above, plus the comments below:
• Your MP3 or WMA files should be ISO 9660 or JOLIET format.
ISO 9660 format and Joliet MP3 or WMA files are compatible with Microsoft's DOS and Windows,
and with Apple's Mac. These two formats are the most widely used.
• When naming your MP3 or WMA files do not exceed 8 characters, and place ".mp3, .wma" as
the file extension.
General name format of: Title.mp3. or Title.wma. When composing your title, make sure that you use
8 characters or less, have no spaces in the name, and avoid the use of special characters including:
(.,/,\,=,+).
1 Press the MODE button.
the LEFT/RIGHT buttons to select
2 Use
PROGRAM. Press the ENTER button.
Press the ENTER button. The selection
numbers appear in the Program Order box.
PROGRAM 01
4
Press the PLAY/PAUSE (
) button.
The disc will be played in programmed order.
• Important: The above recommendations cannot be taken as a guarantee that the DVD player will
play MP3 recordings, or as an assurance of sound quality.
You should note that certain technologies and methods for MP3 file recording on CD-Rs prevent
optimal playback of these files on your DVD player (degraded sound quality and in some cases,
inability of the player to read the files).
• This unit can play a maximum of 500 files and 300 folders per disc.
40
Program Order
Track
01
05
09
13
02
06
10
14
03
07
11
15
------
04
08
12
16
ENTER
------
RETURN
------
------
ADVANCED
FUNCTIONS
• Do not try recording copyright protected MP3 files.
Certain "securized" files are encrypted and code protected to prevent illegal copying. These files are
of the following types: Windows MediaTM (registered trade mark of Microsoft Inc) and SDMITM
(registered trade mark of The SDMI Foundation). You cannot copy such files.
RANDOM
the UP/DOWN/LEFT/RIGHT buttons to
3 Use
select the first track to add to the program.
• Use a decompression transfer rate of at least 128 Kbps when recording MP3 files.
Sound quality with MP3 files basically depends on the rate of compression/decompression you
choose. Getting audio CD quality sound requires an analog/digital sampling rate, that is conversion to
MP3 format, of at least 128 Kbps and up to 160 Kbps. However, choosing higher rates, like 192 Kbps
or more, only rarely give better sound quality.
Conversely, files with decompression rates below 128 Kbps will not be played properly.
• Use a decompression transfer rate of at least 64Kbps when recording WMA files.
Sound quality with WMA files basically depends on the rate of compression/decompression you
choose. Getting audio CD quality sound requires an analog/digital sampling rate, that is conversion to
WMA format, of at least 64Kbps and up to 192Kbps.
Conversely, files with decompression rates below 64Kbps or over 192Kbps will not be played
properly.
PROGRAM
CLEAR
Random Play (CD/MP3/WMA)
1 Press the MODE button.
the LEFT/RIGHT buttons to select
2 Use
RANDOM. Press the ENTER button.
PROGRAM
RANDOM
The disc will be played in random order.
NOTE
• Depending on the disc, the Program and Random Play functions may not work.
• To resume normal play, press the CLEAR button.
• PROGRAM/RANDOM playback cannot be used if the disc contains more than two types of file extensions.
• This unit can support a maximum of 99 programmed order.
41
E138A 00141X-2(GB)XSS
4/22/03 2:11 PM
Page 42
Picture CD Playback
Picture CD Playback
1 Open the disc tray.
2 Load the disc on the tray.
3 Close the tray.
CD-R JPEG Discs
- Load the disc with the labeled side up.
- The tray closes and you should get a screen that looks like the
one to the right.
• Select JPEG in the menu to view a Photo CD.
• Use the UP/DOWN or LEFT/RIGHT buttons on the remote controller
to select the picture you want to view and then press the ENTER
button. (Press the PLAY/PAUSE (
) button if you want to play it
in the Slide Show mode.)
• To see the next 6 pictures, press the
button.
• To see the previous 6 pictures, press the
button.
•
: Return to the Album Screen.
Press the UP/DOWN or LEFT/RIGHT buttons on the remote
controller to display the menu again.
: Each time the ENTER button is pressed, the picture rotates
90 degrees clockwise.
•
: Each time the ENTER button is pressed, the picture is
enlarged up to 2X. (Normal ➝ 2X ➝ Normal)
ALBUM
PHOTO: 1 /215
ENTER
PHOTO: 1 /215
• If a number of folders in 1 Disc is over 300, only JPEG files in 300 folders can be played.
PHOTO: 1 /215
ADVANCED
FUNCTIONS
•
ENTER
• Only files with the ".jpg" and ".JPG" extensions can be played.
• If the disc is not closed, it will take longer to start playing and not all of the recorded files may be
played.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
• The name of the JPEG file may not be longer than 8 characters and should contain no blank spaces
or special characters (. / = +).
• Only a consecutively written multisession disc can be played. If there is a blank segment in the
multisession disc, the disc can be played only up to the blank segment.
• A maximum of 500 images can be stored on a single CD.
• Only Kodak Picture CDs can be played.
• When playing a Kodak Picture CD, only the JPEG files in the pictures folder can be played.
• Picture discs other than Kodak Picture CD may take longer to start playing or may not play at all.
• If a number of files in 1 Disc is over 500, only 500 JPEG file can be played.
ENTER RETURN
PHOTO: 1 /215
•
: The unit enters slide show mode.
*Press the RETURN button to return to the album screen.
*Before the Slide Show can begin, the picture interval must be set.
•
: When this icon is selected and ENTER is pressed, the
pictures change automatically with about an 6 second
interval.
•
: The pictures change automatically with about an 12 second
interval.
TIMER:
ENTER RETURN
•
: The pictures change automatically with about an
18 second interval.
*Depending on the file size, each interval between images may take
longer or shorter than the manual suggests.
• To change the currently playing media, press the STOP ( ) button twice and then press the DISC MENU
button.
• If no button on the remote controller is pressed for 60 seconds, the menu will disappear and the selected
item will be played.
NOTE
• Press the TITLE MENU button to return to the album screen.
• Press the RETURN button to return to the slide show.
• If no buttons on the remote controller pressed for 10 seconds, the menu will disappear.
Press the UP/DOWN or LEFT/RIGHT buttons on the remote controller to display the menu again.
42
43
E138A 00141X-2(GB)XSS
4/22/03 2:12 PM
Page 44
Beginning Karaoke Functions (DVD-E338K/DVD-P538K only)
Reserving a Song (DVD-E338K/DVD-P538K only)
It is the function to reserve the desired song in advance by use of Karaoke function.
Operation Sequence
the Mixed Audio Out terminals with
1 Connect
the TV or AMP.
2 Connect Mic into Mic 1 or Mic 2 jack.
- When the MIC should be connected, karaoke function
can operate.
Sequence of reservation
the Karaoke Disc containing the
1 Playback
wanted songs.
2 Press the KARAOKE button.
the "Request" using the LEFT/RIGHT
3 Select
buttons.
the number (Track No.) of the desired
4 Input
song into the flickering part(--).
- You can reserve up to 10 songs.
Key Control
1 Press the KARAOKE button.
the "Keycon" using the LEFT/RIGHT
2 Select
buttons.
: To let 7 scales down by half scale.
: Original scale.
: To let 7 scales up by half scale.
NOTE
button.
Cancellation of reservation
KARAOKE
FUNCTIONS
3
By use of the LEFT/RIGHT buttons, change
to the desired tone.
you want the next reserved song
5 When
during playing a song, press the SKIP
by pressing the CLEAR button of the
1 Cancel
remote.
- The last reserved song will be erased first.
pressing of the CLEAR button
2 Continuous
can cancel the next reserved song.
the reservation is required again, input the
3 Ifsong
number in the flickering part.
• If you hear strange noises(squealing or howling) while using the karaoke feature, move the microphone
away from the speakers. Turning down the microphone volume or the speaker volume is also effective.
• The next music plays if performing SEARCH with SCORE displayed in the Score On MODE for CD or
VCD.
NOTE
• When playing MP3 disc, MIC & Karaoke functions are not operate.
• When using "SKIP" button, it can not work at the last song.
• When playing LPCM disc, karaoke functions are not operate.
• When using Request function, the "DISPLAY" and “REPEAT” function does not work.
• When the MIC is connected, Digital Out does not work.
44
45
E138A 00141X-2(GB)XSS
4/22/03 2:12 PM
Page 46
Using the Setup Menu
Vocal Function (DVD-E338K/DVD-P538K only)
Sequence of reservation
The Setup menu lets you customize your DVD player by allowing you to select various
language preferences, set up a parental level, even adjust the player to the type of
television screen you have.
the KARAOKE button twice displays the
1 Pressing
following:
the unit in Stop mode, press the MENU button
1 With
on the remote. Select Setup using UP/DOWN
Vocal Fader
buttons, then press the RIGHT or ENTER button.
– The function to make the music only sound by cancelling
vocal when playing a Karaoke disc.
VOCAL FADER
Remark
V1
CH1. Vocal Cancel
↓
V2
CH2. Vocal Cancel
↓
1+2
CH1, CH2. Vocal Cancel
↓
OFF
Vocal Fader Off
Disc Menu
Title Menu
Language Setup : Setup of the Language.
↓
DVD
Audio Setup : Setup of the Audio Options
Function
Setup
Display Setup : Setup of the Display Options
Use to select which type of screen you want to
watch and several display options.
– In VCD, CVD or CD, you can select only the On or Off.
Parental Setup : Setup of the Parental Level
Allows users to set the level necessary to
prevent children from viewing unsuitable movies
such as those with violence, adult subject
matter, etc.
Guide Melody
– To guide melody through xylophone and piano help you sing
easily.
– This function works only on the DVD Karaoke disc on which
the guide melody is recorded.
the UP/DOWN buttons on the remote to access
2 Use
the different features.
3 Press the ENTER button to access the sub features.
Score Function
Press KARAOKE button twice to turn the Score Mode On.
- Score will pop up whenever a song is completed.
CAUTIONS
To make the setup screen disappear after setting up, press the
MENU button again.
Types of Karaoke disc
• DVD Karaoke Disc
• CVD, VCD Karaoke Disc
Karaoke
-Channel
5CH. DVD
2CH. DVD
Channel
1 CH
L
Left stereo music
Left stereo music + Vocal
1 CH
CH1 LEFT
2 CH
R
Right stereo music Right stereo music + Vocal
1 CH
CH1 RIGHT Right stereo music + Vocal
3 CH
M
Guide melody
-
4 CH
V1
Vocal track
-
2 CH
CH2 LEFT
5 CH
V2
Vocal track
-
2 CH
CH2 RIGHT Right stereo music
Channel
46
CHANGING
SETUP MENU
- Make sure to disconnect MIC to play a movie disc or play in a general mode. If you play a movie disc
with the Score On, a score will show up every time when a chapter is over.
Karaoke
-Channel
CVD
Left stereo music + Vocal
VCD, CD
Left stereo music
Right stereo music
+ Vocal
Left stereo music
-
NOTE
Depending on the disc, some Setup Menu selections may not work.
-
47
E138A 00141X-2(GB)XSS
4/22/03 2:12 PM
Page 48
Setting Up the Language Features
Setting Up the Language Features
If you set the player menu, disc menu, audio and subtitle language in advance,
they will come up automatically every time you watch a movie.
Using the Player Menu Language
e.g) Setting up in English.
1 With the unit in Stop mode, press the MENU button.
Setup using UP/DOWN buttons, then RIGHT
2 orSelect
ENTER button.
Language Setup using UP/DOWN buttons,
3 Select
then press the RIGHT or ENTER button.
Select Player Menu using UP/DOWN buttons, then
4 press
the RIGHT or ENTER button.
5 Use the UP/DOWN buttons to select ‘English’.
6 Press the ENTER button.
LANGUAGE SETUP
6 Press the ENTER button.
- English is selected and the screen returns to SETUP menu.
Using the Subtitle Language
- English is selected and the screen returns to SETUP menu.
48
e.g) Setting up in English.
DISC MENU LANGUAGE
Disc Menu
1 With the unit in Stop mode, press the MENU button.
Setup using UP/DOWN buttons, then RIGHT
2 orSelect
ENTER button.
Language Setup using UP/DOWN buttons,
3 Select
then press the RIGHT or ENTER button.
Select Subtitle using UP/DOWN buttons, then press
4 the
RIGHT or ENTER button.
5 Use the UP/DOWN buttons to select ‘English’.
- Select “Automatic” if you want the subtitle language to be the
same as the language selected as the audio preference.
- Select “Others” if the language you want is not listed.
Some discs may not contain the language you select as
your initial language; in that case the disc will use its
original language setting.
6 Press the ENTER button.
CHANGING
SETUP MENU
- Select “Others” if the language you want is not listed.
Audio using UP/DOWN buttons, then press
4 Select
the RIGHT or ENTER button.
5 Press the UP/DOWN buttons to select ‘English’ .
- Select “Others” if the language you want is not listed.
Using the Disc Menu Language
1 With the unit in Stop mode, press the MENU button.
Setup using UP/DOWN buttons, then RIGHT
2 orSelect
ENTER button.
Select Language Setup using UP/DOWN buttons,
3 then
press the RIGHT or ENTER button.
Select Disc Menu using UP/DOWN buttons, then
4 press
the RIGHT or ENTER button.
5 Use the UP/DOWN buttons to select ‘English’.
6 Press the ENTER button.
1 With the unit in Stop mode, press the MENU button.
Setup using UP/DOWN buttons, then RIGHT
2 orSelect
ENTER button.
Language Setup using UP/DOWN buttons,
3 Select
then press the RIGHT or ENTER button.
- Select “Original” if you want the default soundtrack language to
be the original language the disc is recorded in.
- English is selected and the screen returns to SETUP menu.
- To make the SETUP menu disappear, press the RETURN or
LEFT button.
This function changes the text language only on the disc
menu screens.
Using the Audio Language
NOTE
• If the selected language is not
recorded on the disc, the original
pre-recorded language is selected.
• How to make the SETUP menu
disappear or return to menu screen
during set up; Press RETURN or
LEFT button.
- English is selected and the screen returns to SETUP menu.
49
E138A 00141X-2(GB)XSS
4/22/03 2:12 PM
Page 50
Setting Up the Audio Options
Surround Sound Speaker Setup (DVD-P538K only)
1 With the unit in Stop mode, press the MENU button.
Setup using UP/DOWN buttons, then RIGHT
2 orSelect
ENTER button.
Select Audio Setup using UP/DOWN buttons, then
3 press
the RIGHT or ENTER button.
the UP/DOWN buttons to select the desired
4 Use
item. Then press the RIGHT or ENTER button.
AUDIO SETUP
Dolby Digital Out
MPEG-2 Digital Out
: PCM
1. PCM :
Converts to PCM(2CH) audio.
Select PCM when using the Analog Audio Outputs.
2. Bitstream :
Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital Audio Output.
DTS
: Off
Dynamic Compression
PCM Down Sampling
Multi Channel Output
Speaker Setup
: On
: On
: Digital
NOTE
• Be sure to select the correct Digital Output
or no audio will be heard.
• When Multi Channel Output select Digital.
Dolby & MPEG-2 Digital Out works.
DTS
1. Off : Doesn’t output digital signal.
2. On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
Dynamic Compression
1. On : To select dynamic compression.
2. Off : To select the standard range.
MPEG-2 Digital Out
1. PCM :
Converts to PCM(2CH) audio.
Select PCM when using the Analog
Audio Outputs.
2. Bitstream :
Converts to MPEG-2 Digital
Bitstream (5.1CH or 7.1CH).
Select Bitstream when using the
Digital Audio Output.
PCM Down Sampling
Multi Channel Output (DVD-P538K only)
1. Digital : Select this when using the multichannel digital audio output.
2. Analog : Select this when using the multichannel analog audio output.
Speaker Setup (DVD-P538K only)
NOTE
• How to make the SETUP menu disappear or return to menu screen during set up;
Press RETURN or LEFT button.
• Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
• “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
The default settings : FRONT L , R (Large), CENTER(None),
SURROUND (None)
Select the size of the speakers to be connected.
• Front (FL , FR)
- Large: Normally select this.
- Small: When the sound cracks or the surround sound effects are
difficult to hear, select this. This activates the Dolby Digital bass
redirection circuitry and outputs the bass frequencies of the speaker
from the subwoofer.
• Center
- None: If you do not connect a center speaker, select this.
- Large: Normally select this.
- Small: When the sound cracks, select this. This activates the Dolby
Digital bass redirection circuitry and outputs the bass frequencies of
the center speaker from other speakers.
• Surround (SL, SR)
- None: If you do not connect a center speaker, select this.
- Large (Rear/Side): Normally select either of these according to the
rear speaker’s position.
- Small (Rear/Side): When the sound cracks or the surround sound
effects are difficult to hear, select either of these according to the
rear speaker’s position. This activates the Dolby Digital bass
redirection circuitry and outputs the bass frequencies of the rear
speaker from other speakers.
Setting up TEST
The test output signals come clockwise starting from the Front
Speaker(L). Adjust Channel Balance to match to the volume of test
signals memorized in the system.
FRONT(L)
CENTER
SURROUND(R)
SUBWOOFER
SURROUND(L)
FRONT(R)
AUDIO SETUP
Dolby Digital Out
: PCM
MPEG-2 Digital Out
: PCM
DTS
: Off
Dynamic Compression
PCM Down Sampling
Multi Channel Output
Speaker Setup
: On
: On
: Analog
Dolby Digital Out
: PCM
MPEG-2 Digital Out
: PCM
DTS
Dynamic Compression
PCM Down Sampling
Multi Channel Output
:
:
:
:
AUDIO SETUP
Off
On
On
Analog
Speaker Setup
NOTE
• How to make the SETUP
menu disappear or return to
menu screen during set up.
Press RETURN or LEFT button.
• The subwoofer test output
signal is lower than the other
speakers.
• The MPEG Multichannel logo
is a trademark registered by
PHILIPS Corporation.
51
CHANGING
SETUP MENU
1. On : Select this when the amplifier connected to the player is not 96KHz compatible.
In this case, the 96KHz signals will be down converted to 48KHZ.
2. Off : Select this when the amplifier connected to the player is 96KHz compatible.
In this case, all signals will be output without any changes.
50
: PCM
Dolby Digital Out
the unit in Stop mode, press the MENU button.
1 With
Select Setup using UP/DOWN buttons,
2 then RIGHT or ENTER button.
Select Audio Setup using UP/DOWN buttons,
3 then
press the RIGHT or ENTER button.
Select Multi Channel Output using UP/DOWN
4 buttons. Then select Analog pressing the RIGHT
or ENTER button.
the UP/DOWN buttons to select Speaker Setup.
5 Use
Then press the RIGHT or ENTER button.
the UP/DOWN or LEFT/RIGHT buttons to select
6 Use
the desired item. Then press the ENTER button.
E138A 00141X-2(GB)XSS
4/22/03 2:12 PM
Page 52
Setting Up the Display Options
Setting Up the Display Options
1 With the unit in Stop mode, press the MENU button.
Setup using UP/DOWN buttons, then RIGHT
2 orSelect
ENTER button.
Display Setup using UP/DOWN buttons,
3 Select
then press the RIGHT or ENTER button.
the UP/DOWN buttons to select the desired
4 Use
item. Then press the RIGHT or ENTER button.
DISPLAY SETUP
TV Aspect
: 4:3 L - Box
TV Aspect
Still Mode
: Auto
Screen Messages : On
Still Mode
Front Display
: Auto Dim
Black Level
: Off
NTSC Disc Output : PAL 60 Hz
Screen Messages
Front Display
TV ASPECT
4:3 Letter Box
Black Level
4:3 Pan Scan
TV Aspect
Depending on the type of television you have, you may want to adjust the screen
setting (aspect ratio).
1. 4:3 Letter Box :
Select when you want to see the total 16:9 ratio screen DVD supplies, even though
you have a TV with a 4:3 ratio screen.
Black bars will appear at the top and bottom of the screen.
2. 4:3 Pan Scan :
Select this for conventional size TVs when you want to see the central portion of the
16:9 screen. (Extreme left and right side of movie picture will be cut off.)
3. 16:9 Wide :
You can view the full 16:9 picture on your widescreen TV.
Still Mode
These options will help prevent picture shake in still mode and display small text
clearer.
1. Auto : When selecting Auto, Field/Frame mode will be automatically converted.
2. Field : Select this feature when the screen shakes in the Auto mode.
3. Frame : Select this feature when you want to see small letters more clearly in the
Auto mode.
16:9 Wide
NTSC Disc Output
Screen Messages
Use to turn on-screen messages On or Off.
CHANGING
SETUP MENU
Front Display
Adjust the brightness of the unit’s front panel display.
1. Auto Dim : Makes the Front Panel Display dim automatically when playing a DVD.
2. Bright : Makes the Front Panel Display bright.
3. Dim : Makes the Front Panel Display dim.
Black Level
Adjusts the brightness of the screen.(On/Off)
NOTE
• How to make the SETUP menu disappear or return to menu screen during set up;
Press the RETURN or LEFT button.
52
NTSC Disc Output
“NTSC” if the screen only has one NTSC-video entrance. If this is not the case, you
can choose to leave “ PAL 60Hz” as is.
53
E138A 00141X-2(GB)XSS
4/22/03 2:12 PM
Page 54
Setting Up the Parental Control
Controlling a TV with the Remote (DVD-P538K only)
The Parental Control function works in conjunction with DVDs that have been assigned
a rating - which helps you control the types of DVDs that your family watches.
There are up to 8 rating levels on a disc.
1 With the unit in Stop mode, press the MENU button.
Setup using UP/DOWN buttons, then RIGHT
2 orSelect
ENTER button.
Select Parental Setup using UP/DOWN buttons,
3 then
press the RIGHT or ENTER button.
RIGHT or ENTER to select Yes if you want to
4 Use
use a password. The Enter Password screen
TV Codes
CODE
01
02
PARENTAL SETUP
Use Password
: No
appears.
your password. The Re-enter Password
5 Enter
screen appears to confirm the password.
ENTER
Enter your password again.
The Parental Control screen appears.
About the Rating Level ;
The Rating Level will work only when Use Password
is set to Yes. To unlock the player, use UP/DOWN to
select No. Use RIGHT or ENTER to select Rating
Level. Press ENTER.
RETURN
MENU
CREATE PASSWORD
- - - -
0~9
RETURN
PARENTAL SETUP
About the Change Password ;
e.g) Setting up in LEVEL6.
15
16
17
18
BRAND
SAMSUNG_4
SAMSUNG_6, LG, LOEWE, PHILIPS,
FINLUX, YOKO, LOEWE OPTA,
MITSUBISHI, PHONOLA, RADIOLA,
SCHNEIDER
SAMSUNG_1
SAMSUNG_2
SAMSUNG_3
SAMSUNG_5
TOSHIBA
PANASONIC_4
GRUNDIG, BLAUPUNKT, SIEMENS
SHARP
HITACHI
SANYO, AKAI, FISHER
HITACHI, SABA, THOMSON, NORDMENDE
HITACHI, NORDMENDE, SABA,
TELEFUNKEN, THOMSON, BRANDT,
FERGUSON, PIONEER, TELEAVA
SONY
TOSHIBA, SANYO, SHARP, SONY,
MITSUBISHI
TOSHIBA, GRUNDIG, FINLUX
TOSHIBA
1 Turn on the TV.
2 Point the DVD’s remote at the TV.
holding the TV POWER button
3 While
down, enter the code for your brand.
CODE
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
BRAND
TOSHIBA
PHILIPS, PHONOLA, RADIOLA
TOSHIBA, GRUNDIG, CGE,
IMPERIAL, MIVAR
PHILIPS, SABA, BANG&OLUFSEN,
BRIONVEGA, FINLUX,
FORMENTI, LOEWE OPTA, METZ,
WEGA, PHONOLA, RADIOMARELLI,
SINGER, SINUDYNE
NOKIA, PANASONIC, SABA, PIONEER,
REZ, SELECO, SALORA
HITACHI, NORDMENDE, PANASONIC,
SABA,TELEFUNKEN, THOMSON,
CONTINENTAL, EDISON
PANASONIC_2
PANASONIC_3
PANASONIC_6
TELEFUNKEN
MIVAL
LG_2
SHARP_2
JVC
THOMSON ASIA
THOMSON ASIA
4 If the TV turns off, setup is complete.
Enter other codes of the same brand
if the first code does not work.
operate the TV, use the “TV Function
5 ToButtons”
described on page 19.
RATING LEVEL
NOTE
Level 8 Adult
Level 7
Level 6
Level 5
Level 4
Level 3
Level 2
Level 1 Kids Safe
e.g) For SAMSUNG 4 TVs
While holding down the TV POWER button,
enter 0 and then 1.
NOTE
The remote may not be able to control every
model TV of the brands listed.
55
CHANGING
SETUP MENU
- Use UP/DOWN to select Change Password.
Press ENTER. The Change Password screen appears.
- Enter your new password. Re-enter the new password again.
54
03
04
05
06
07
08
09
10
11
12
13
14
Enter Password
- Use UP/DOWN to select the level(e.g. Level 6) and press
ENTER. Discs that contain Level 7 will now not play.
- To cancel the rating level, use RIGHT or ENTER to select No in
Use Password.
• How to make the SETUP menu disappear or return to
menu screen during set up;
Press RETURN or LEFT button.
• If you have forgotten your password, see Forget Password in
the Troubleshooting Guide.
The remote can also be set up to control most TVs. To program the remote, use the
code that corresponds to your brand.
E138A 00141X-2(GB)XSS
4/22/03 2:12 PM
Page 56
Troubleshooting
Specifications
General
Before requesting service (troubleshooting), please check the following.
Problem
No operations can be
performed with remote.
Action
• Check the batteries in the remote. May need replacing.
• Operate the remote control at a distance of no more than 20 feet.
• Remove batteries and hold down one or more buttons for several
minutes to drain the microprocessor inside the remote to reset it.
Reinstall batteries and try remote again.
Disc does not play.
• Ensure that the disc is installed with the label side facing up.
• Check the region number of the DVD.
5.1 channel sound is not
being reproduced.
• 5.1 channel sound is reproduced only when the following conditions
are met. :
1) The DVD player is connected with the proper amplifier
2) The disc is recorded with 5.1 channel sound.
• Check whether the disc being played has the “Dolby 5.1 ch” mark
on the outside.
• Check if your audio system is connected and working properly.
• In a SETUP Menu, is the Audio Output set to Bitstream?
The
icon appears on
screen.
• The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is
out of range.
Page
Power Requirements
AC 110~240V, 50/60 Hz
Power Consumption
12 W
Weight
2.4 Kg
Dimensions
P4
+5°C to +35°C
Operating Humidity Range
10 % to 75 %
DVD
P7
Disc
(DIGITAL VERSATILE DISC)
(COMPACT DISC)
CD : 8Cm
P20
(COMPACT DISC)
P50~51
VCD : 12Cm
Approx. Play Time
Reading Speed : 1.2 to 1.4 m/sec.
Maximum Play Time : 74 min.
Reading Speed : 1.2 to 1.4 m/sec.
Maximum Play Time : 20 min.
Reading Speed : 1.2 to 1.4 m/sec.
Maximum Play Time : 74 min. (Video + Audio)
P24
Video
Output
Composite Video
1 channel : 1.0 Vp-p (75 Ω load)
Component Video
Y : 1.0 Vp-p (75 Ω load)
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
• Check if the disc has a Menu.
P47~48
S-VIDEO
Play mode differs from the
Setup Menu selection.
• Some of the functions selected in the Setup Menu may not work
properly if the disc is not encoded with the corresponding function.
P47~54
2 channel
The screen ratio cannot
be changed.
• The Screen Ratio is fixed on your DVDs.
P52~53
No audio.
• Make sure you have selected the correct Digital Output in the Audio
Options Menu.
P50~51
Forgot password
• Press power on from a cold start with no disc in the unit. Press the
STOP ( ) and PLAY (
) buttons simultaneously on the front panel
for three seconds. The Select Menu Language display will appear.
Select the desired language button. Press the MENU button on the
remote control to select the Parental Mode. The Parental Mode is now
unlocked as indicated on the display. Press the DOWN button to select
Parental. Press ENTER and the Create Password display will appear.
You can now set your rating level and change your password to a new
number.
Luminance Signal : 1.0 Vp-p (75 Ω load)
Chrominance Signal : 0.286 Vp-p (75 Ω load)
L(1/L), R(2/R)
48 kHz Sampling : 4 Hz to 22 kHz
• Go to the contents and find the section of the instruction book that
contains the explanations regarding the current problem, and follow
the procedure once again.
• If the problem still cannot be solved, please contact your nearest
authorized service center.
*Frequency Response
Audio
Output
110 dB (DVD-E138A/DVD-1010/DVD-E138B/DVD-E238)
*S/N Ratio
105 dB (Karaoke off Mode DVD-E338K/DVD-P538K)
100 dB (DVD-E138A/DVD-1010/DVD-E138B/DVD-E238)
*Dynamic Range
P54
96 kHz Sampling : 4 Hz to 44 kHz
96 dB (Karaoke off Mode DVD-E338K/DVD-P538K)
0.004 % (DVD-E138A/DVD-1010/DVD-E138B/DVD-E238)
*Total Harmonic Distortion
0.004 % (Karaoke off Mode DVD-E338K/DVD-P538K)
*: Nominal specification
• Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
• Weight and dimensions are approximate.
REFERENCE
56
Reading Speed : 3.49 m/sec.
(Single Sided, Single Layer Disc) : 135 min.
CD : 12Cm
Disc Menu doesn’t appear.
If you experience other
problems.
430mm (W) X 240mm (D) X 60mm (H)
Operating Temperature Range
57
Download PDF

advertising