Samsung | YP-T6H | Samsung YP-T6H 사용자 매뉴얼

T6kal ENG Cover
11/12/04 2:44 PM
Page 1
-
AH68-01633A (Rev 0.0)
MP3, WMA , ASF and Ogg Playback
Removable Storage Device
Direct MP3 Recording
FM Reception
3D Sound
USB 2.0 Support
Upgradable
20 Hours of Continuous Play
Voice Recording Function
11/12/04 2:43 PM
Page 2
Contents
I Preparations
Safety Instructions................................................................................................................................................4
Features ..............................................................................................................................................................6
Components ........................................................................................................................................................8
Location of Controls ............................................................................................................................................9
I Connection to Computer
Connecting the player to PC ..............................................................................................................................11
Manual Installation of USB Driver ......................................................................................................................15
Using the removable storage(PC)......................................................................................................................18
● Downloading/Uploading files ........................................................................................................................18
● Disconnecting the USB cable........................................................................................................................18
● Formatting ....................................................................................................................................................19
Installing yepp Studio ........................................................................................................................................20
To View Help on yepp Studio ............................................................................................................................21
I Basic Usage
Playing Music and Turning Off the Device ........................................................................................................22
Hold Function ....................................................................................................................................................23
Recording Voice ................................................................................................................................................23
MP3 Encoding ....................................................................................................................................................24
Searching for Music/Voice Files ........................................................................................................................25
Listening to FM Radio ........................................................................................................................................26
FM Encoding ......................................................................................................................................................28
Contents
I Additional Usage
English
T6kal ENG0.0
Loop Repeating ..................................................................................................................................................28
MENU Options ..................................................................................................................................................29
Using Navigation ................................................................................................................................................30
Setting Playlist....................................................................................................................................................33
Setting the Advanced Functions ........................................................................................................................34
Selecting the Playmode......................................................................................................................................35
Setting the EQ mode..........................................................................................................................................36
● Preset EQ......................................................................................................................................................36
● Bass Booster ................................................................................................................................................36
● WOW Set ......................................................................................................................................................37
● User EQ Set ..................................................................................................................................................38
Display................................................................................................................................................................39
● Scroll Speed ..................................................................................................................................................39
● Display Time..................................................................................................................................................39
● Backlight........................................................................................................................................................40
● Contrast ........................................................................................................................................................40
● Tag ................................................................................................................................................................41
● Language ......................................................................................................................................................41
Setting the System ............................................................................................................................................42
Encoding ............................................................................................................................................................44
Power Off Time ..................................................................................................................................................45
Managing Files ..................................................................................................................................................46
I Appendix
MENU Table ......................................................................................................................................................47
I Customer Support
Troubleshooting..................................................................................................................................................48
Specifications ....................................................................................................................................................50
2
3
11/12/04 2:43 PM
Page 4
Safety Instructions
Safety Instructions
Read and understand all the instructions to avoid injury to yourself and damage to the equipment.
Do not expose to extreme temperatures (above 95°F or below 23°F).
Do not expose to moisture.
Do not subject the unit to severe
impact, or place heavy objects
on it.
Do not let any foreign matter spill
into the device.
I Earphones
English
T6kal ENG0.0
Follow Traffic Safety Instructions
● Do not use the earphones while driving an automobile or riding a bicycle.
It’s not only dangerous, but also against the law.
● It may cause an accident if you turn up the volume of the earphones while walking.
especially when crossing intersections.
Protect your ears
● Do not turn up the volume too high. Doctors warn against prolonged exposure to high volume.
● Stop using the device or turn the volume down if you have ringing in your ears.
Be careful not to subject the player to excessive pressure when
wearing it round your neck.
Do not expose to chemicals such
as benzene and thinners.
Remove batteries when the
device is left unused for a long
period of time.
I Ambient operating conditions
● Ambient temperature : 5°C ~ 35°C (41°F ~ 95°F)
Humidity : 10 ~ 75%
I Environmental Information
Do not expose to direct sunlight
or heat sources.
Do not store in dusty areas.
Do not try to disassemble and
repair the device yourself.
● Follow local guidelines for waste disposal when discarding packages, batteries,
and old electronic appliances.
● Your player is packaged with cardboard, polyethylene etc., and does not use any unnecessary materials.
✽ Please be aware that we claim no responsibility for damage from data loss
due to breakdown, repair or other causes.
4
5
11/12/04 2:43 PM
Page 6
Features
MP3, WMA , ASF and Ogg Playback
●
The player supports playback of MP3, WMA, ASF and Ogg.
Removable Storage Device
●
You can easily copy and paste files to the player using Windows Explorer.
Features
USB 2.0 Support
●
Direct MP3 Recording
6
20 Hours of Continuous Play
●
Listening to an FM program is made easy with Auto Search and
Frequency Memory functions.
3D Sound
●
You can upgrade the built-in programs when available.
Add functions, CODEC, etc. Please check the home page
(www.samsung.com) for upgrades.
You can convert music from CDs, cassettes, and radio into
MP3 files without a PC.
FM Reception
●
Maximum data speed transfer of 18 Mbps.
Upgradable
●
●
English
T6kal ENG0.0
The 3D surround feature adds spaciousness to the sound.
This player uses one AAA/LR03 alkaline battery. Operation can last up to 20hours.
Actual playing time may vary according to the type and capacity of the battery.
Voice Recording Function
●
You can make high quality voice recordings.
7
11/12/04 2:43 PM
Page 8
Components
Location of Controls (yepp)
English
T6kal ENG0.0
Neck strap Hook
Display
Earphone
Carrying case
Neck Strap
Installation CD
MENU, Navigation button/
Move to Track/Speed Search/
Volume Button
Charger
Loop Repeating Button
Play/Pause Button
Recording Button
Player
Rechargeble Bettery
(Ni-MH,AAA)
Line In Cable
USB Cable
Direct Connect
USB Adaptor
Microphone
Model
YP-T6 H
YP-T6 V
YP-T6 X
YP-T6 Z
Built-in memory
128MB
256MB
512MB
1GB
● The capacity of the useable built-in memory is less than indicated as the internal firmware
uses a part of the memory as well.
● Design of accessories is subject to change for the purposes of improvement, without notice.
8
Hold Switch
User manual
USB Cable
Connection Port
ENC Jack
Battery Cover
Earphone Jack
Continued...
9
11/12/04 2:43 PM
Page 10
Location of Controls (yepp)
I Display
¤ System Requirements.
Track Number indicator
Play/Stop/Pause indicator
Play mode indicator
Remaining Battery Power indicator
Title (track & artist) indicator
Playtime indicator
I Installing software
1 Slide the cover in the direction of
1 Insert the Installation CD into the
the arrow to open.
+ , – and push-close the cover in
the direction of the arrow as indicated.
✍ Note
- Do not place heavy objects on the cover.
● Pentium 200MHz or greater
● Windows 98 SE/ME/2000/XP
● 40MB of available hard disk space
● CD-ROM drive
(double speed or greater)
● USB port (2.0) supported
● VGA graphic
- Install the operating system in Administrator Account mode
for Windows 2000 or XP. Otherwise, installation will not be
completed.
- Windows ME, 2000 and XP can recognize the driver
without installing the provided program. However,
you must install the program in order to format yepp and
upgrade firmware.
- If the YP-T6 program has not been installed in Windows
98, then it will not communicate with your removable disk.
You must install the USB driver file first.
Before connecting yepp to PC, make sure to install USB driver. If “Add New Hardware Wizard”
appears, press the [Cancel] button and install the USB driver.
I Inserting a Battery
2 Insert a battery to the right poles
✍ Note
The PC system must meet the
following specifications:
Equalizer, SRS indicator
10
Connecting the player to PC
English
T6kal ENG0.0
k
CD-ROM drive.
Select [Install yepp USB Driver].
✍ Note
- Lyrics Station is currently
available only in Korea and China.
- Coolgate is currently available
only in Korea.
Continued...
11
11/12/04 2:43 PM
Page 12
Connecting the player to PC
2 Follow the instructions in the window to complete the installation.
Connecting the player to PC
I Connecting yepp to PC with the USB cable
English
T6kal ENG0.0
1 Connect the USB cable to the USB port on the computer.
k
k
2 Connect the other end of the USB cable to the USB cable connection port on
the bottom of the player.
● If you disconnect the USB cable from your PC while implementing a
command or initializing during USB driver installation, your PC may not
function correctly.
3 The USB driver is installed with a message saying that it is searching for a new
k
k
device. You may not see the display screen during installation.
Go to the device manager to check that installation has been successfully
completed.
4 Upon installation of the USB driver "Samsung yepp YP-T6 USB Device" will
appear in the [System Properties] ➝ [Device Manager].
12
Continued... 13
11/12/04 2:43 PM
Page 14
Connecting the player to PC
How to check USB driver
Windows 98:
Control Panel ➝ System ➝ Device Manager ➝ Disk Drives ➝ Samsung yepp YP-T6
Windows 2000:
Control Panel ➝ System ➝ Hardware ➝ Device Manager ➝ Disk Drives ➝
Samsung yepp YP-T6 USB Device
Windows XP:
Control Panel ➝ System ➝ Hardware ➝ Device Manager ➝ Universal Serial Bus controllers ➝
Disk Drives ➝ Samsung yepp YP-T6 USB Device
Manual Installation of USB Driver
Go to “Downloading/Uploading files” if the USB driver is in installed.
Follow these steps if the USB driver is not in installed :
English
T6kal ENG0.0
I When an error occurs during installation of the USB driver
1 Check the device manager.
Windows 98,ME:
Control Panel ➝ System ➝ Device Manager
Windows 2000:
Control Panel ➝ System ➝ Hardware ➝
Device Manager
Windows XP:
Control Panel ➝ System ➝ Hardware ➝
Device Manager
2 Check if there is a device listed with an exclamation point or a question mark
(displayed as unknown device or USB device).
3 Double click on the device listed with an exclamation point or a question mark.
✍ Note
5 When the USB driver is not installed automatically, refer to the next page.
14
- If you are using Windows 2000 and your version of Windows does not recognize the USB driver
please download and install the latest service pack from windowsupdate.microsoft.com
- The installation method may vary depending on the type of PC or operating system.
Contact your PC dealer or service center for installation information.
- If errors occur continuously when you install the USB driver, reconnect the USB cable after
rebooting your system.
15
11/12/04 2:43 PM
Page 16
Manual Installation of USB Driver
4 After selecting the driver,
5 Click [Next].
click [Update Driver].
Manual Installation of USB Driver
I In Windows 98
English
T6kal ENG0.0
Follow the instructions in the window to complete the installation.
k
k
USB driver location
[CD ROM]\setup\Drivers
6 Select
[Search for a suitable driver
for my device] and then click [Next].
7 Click [Next] to finish.
k
: You must reboot your computer to complete the installation.
✍ Note
- You cannot use it as a removable disc in Windows 98 if the YP-T6 program is not installed.
Make sure to install the USB driver file first.
16
17
11/12/04 2:43 PM
Page 18
Using the removable storage(PC)
I Downloading/Uploading files
1 Connect the player to your PC with the supplied USB cable.
2 Open Windows Explorer on PC.
● Removable Disc is displayed in Windows Explorer.
Using the removable storage(PC)
2 When the
[Stop a Hardware device]
message appears, press
the [OK] button and
disconnect the USB cable.
English
T6kal ENG0.0
k
3 Select the file to save and drag-and-drop it into the removable disk icon.
(In numerical, alphabetical order)
● If you change the name of music files in Windows Explorer like 001* * * , 002* * *...,
music files will be played in the order of number indicated.
✍ Notice
- The “WRITING/READING” message will appear during
file download or upload. Disconnecting the USB cable
while “WRITING/READING” is displayed may cause
malfunction of the unit.
I Formatting
1 Select the removable disc icon
and click the right mouse button
to select [Format].
2 Press the [Start] button.
● All saved files will be formatted.
● You can change the name of removable disc
by selecting [Volume label].
- The order of music files is not relative to the replay order
when you select a Removable Disc in Windows Explorer.
I Disconnecting the USB cable
After completing the file transfer, you must disconnect the cable in the following way:
1 Double-click on the green arrow in the taskbar on the
bottom right of the window.
✍ Note
- By formatting, all previously preset menus will be initialized.
- Care must be taken as formatted files can not be recovered.
18
Continued...
19
11/12/04 2:43 PM
Page 20
Installing yepp Studio
To View Help on yepp Studio
yepp Studio is the program that can convert and play back the music files in PC.
1 Insert the Installation CD into CD-ROM drive.
2 Select language
Select [Install yepp Studio].
Run yepp Studio and press F1.
● Help will appear.
English
T6kal ENG0.0
Move the arrow to the top of yepp Studio and right click on the
mouse. The following selection window will appear.
● Click on Help and the Help window will appear.
k
3 Follow the instructions in the window to complete the installation.
● Please refer to Help for more information on how to use yepp Studio.
✍ Note
- Music recognition technology and related data are provided by Gracenote and Gracenote
CDDB® Music Recognition ServiceSM.
- CDDB is a registered trademark of Gracenote. The Gracenote logo and logotype,
the Gracenote CDDB logo and logotype, and the "Powered by Gracenote CDDB" logo are
trademarks of Gracenote. Music Recognition Service and MRS are service marks of Gracenote.
✍ Note
20
- If [Register Serial Number] window appears when you install the yepp Studio for the first time,
enter the Serial Number (S/N) attached on the back of the player.
21
11/12/04 2:43 PM
Page 22
Playing Music and Turning Off the Device
I Turning Power On and Off
Power On : Press the
button to turn on the power.
Power Off : Press and hold the
button to turn off the power.
HOLD Function
In Hold mode, all buttons are disabled.
Slide the
English
T6kal ENG0.0
switch in the direction of the arrow.
❈ When the button is pressed, the “
HOLD!” message will appear on the display.
I Playing Music (Power On)
Press the
button.
Recording Voice
● Playback starts.
I Pausing Music (Power Off)
Press the
button to pause playback.
● If no buttons are pressed within 10 seconds (changes depending on settings),
the player automatically powers off.
● While in Pause mode, press the
button again to resume playback.
✽ To move to other modes from the Voice mode,
refer to “Changing Mode”.
1 Press and hold the REC button to start voice recording.
2 Press the REC button again to stop the recording and save the voice file.
I Adjusting the Volume
Press the joystick up or down to adjust the volume from 00 to 30.
✍ Note
- If the file name is not displayed correctly, move to [Settings] ➔ [Display] ➔ [Language] and
then change the language setting.
- WMA files can only be played as music files with a compression rate of 48Kbps-192Kbps.
- The power off time can be set in the menu.
22
✍ Note
- The files are recorded in the order of V001,V002......,
and saved as WAV file in the VOICE folder after recording.
- If the Memory is full, Voice Recording is stopped automatically.
- Voice Recording does not work in FM Mode or when the Line In cable is connected.
23
11/12/04 2:43 PM
Page 24
MP3 Encoding
Searching for Music/Voice Files
✽ To move to other modes from LINE_ENC mode,
refer to “Changing Mode”.
1 Connect the Audio Output port on the external audio source
(or the Line Out port) to the ENC port on the device with the Line cable.
¤ To search for specific parts during play
English
T6kal ENG0.0
● Press and hold the joystick left or right during playback to search for
the part you want to listen to.
● Release the joystick to resume play normally.
¤ To change tracks during play
2 Press and hold the REC button to start MP3 encoding.
● If the
button is pressed, encoding is paused and if the
the encoding resumes.
button is pressed again,
3 If the REC button is pressed during encoding, the encoding stops and an
encoding file is created.
● The files are encoded in the order of L001, L002....
and saved as MP3 file in LINE_ENC folder after encoding.
✍ Note
- Bit Rates can be set within the range of 32Kbps~128Kbps.
- Volume can be adjusted while monitoring the Encoding.
✍ Notice
24
- Do not disconnect the Line cable during Encoding.
- If the battery is not sufficiently charged, the player will not completely encode the file.
- Adjust the volume of the external audio source to a suitable level and encode it.
If the volume level is too high, the sound quality may be poor.
● Press the joystick to the
position briefly during playback to play the next track.
● Press the joystick to the
position briefly within 5 seconds after playback starts,
to move to and play the previous track. Press the joystick to the
position briefly
after five seconds to play the current track from the beginning.
¤ To change tracks when stopped
● Press the joystick left or right in stop mode to move
to the previous/next track.
✍ Note
- VBR(Variable Bit Rate) file: A file that constantly changes the compression rate according
to the type of sounds, such as their pitch, in the file.
- In the case of a VBR file, you cannot move to and play the previous track even if you press
the joystick to the
position within 5 seconds after playback starts.
- Files that were downloaded in MP2 or MP1 and had their file extension changed to MP3
may not play.
25
11/12/04 2:43 PM
Page 26
Listening to FM Radio
First, press the
Listening to FM Radio
key to display the menu screen and select FM Radio.
I Manual Search for a Frequency
I Searching Stored Frequencies
1 Press the
● Press the joystick left or right briefly to search manually for
the frequency you want.
English
T6kal ENG0.0
button in FM Mode.
● PRESET screen will appear.
2 Use
,
to move to the frequency you want.
I Automatic Search for a Frequency
● Press and hold the joystick left or right to search for and stop at
frequencies with reception.
● After searching manually for the frequency you want,
press the A↔B button to display the save screen.
● Press joystick left or right to select the number you
want to assign to save the frequency and then
press the A↔B button.
2 After selecting the “Y”, press the
- To exit from FM Mode press the
button in the center.
- Mono (MO) or Stereo (ST) is automatically selected.
26
button.
● The saved PRESET number will be deleted.
I Mute Function
1 Press the
I Automatic Storage of a Frequency
✍ Note
1 After moving to the PRESET number you want to delete,
press and hold the A → B button.
I Manual Storage of a Frequency
● Press and hold the A↔B button while in FM Mode.
● Frequencies within the range of 87.5MHz to
108.0MHz are automatically selected and stored.
● Frequencies are automatically stored, starting from 1.
I Deleting Stored Frequencies
button in FM mode.
● ”MUTE” is displayed and no sound is heard.
2 Press the
button again.
● Mute function is released.
Number of channels saved.
✍ Note
- You can store up to 20 frequencies.
- Press the
button in the PRESET screen to exit the PRESET mode.
27
T6kal ENG0.0
11/12/04 2:43 PM
Page 28
FM Encoding
MENU Options
● Encoding of the currently transmitted FM broadcast begins.
Press and hold the
2 Press the REC button again.
Use
● A file is created and the encoding stops.
● Files are encoded in the order F001, F002, F003...and saved as MP3 files in FM_ENC
folder.
,
button to switch to MENU mode.
to move and press the
Press and hold the
English
1 Press and hold the REC button during FM reception.
button briefly to select the menu you want.
button to exit the MENU mode.
Loop Repeating
¤ Starting Point
While playing music files, press the A↔B button
briefly at the beginning of the loop you want to set.
● Now playing : To check the file currently playing.
● FM Radio : To listen to FM radio
● Navigation : To move to Navigation Mode
● Playlist : To play back only the files you want
● Settings : To set the yepp functions
● Exit : To exit MENU
A↔ appears in the display.
¤ Ending Point
Press the A↔B button briefly again to set the
end of the loop.
A↔B appears in the display.
The loop is played repeatedly.
✍ Note
✍ Note
- Menu mode will be cancelled if no buttons are pressed within 15 seconds
- Press the A↔B button briefly to cancel the loop.
- Loop Repeat is automatically released if you Speed Search with
28
,
.
29
11/12/04 2:43 PM
Page 30
Using Navigation
You can easily search for files or switch modes using the Navigation function.
1 Press the
button to enter Navigation mode.
or press and hold the
button to move to Menu and then select
Navigation in Menu.
2 Select the file or folder that you want to play.
●
●
●
●
: When moving to a higher-level folder.
: When moving to a lower-level folder.
, : When moving to a file or folder in the same directory.
: Move to the next folder down. When there is not a lower folder,
the selected file will be designated as part of the playlist.
3 Press the
I Changing Mode
You can change the mode in the following method.
Ex) To change from the Voice mode to the Music mode
1 Press the
✍ Note
button in Navigation mode to exit the Navigation mode.
button in the
Voice mode.
2 Use
3 Use
button.
● The selected file will be played.
- Press and hold the
Using Navigation
English
T6kal ENG0.0
to move to the upper folder.
,
to move to the music file you want and press the
button.
● As it is changed to the Music mode, the selected file will be played.
✍ Note
- To change to the FM mode, refer to “Menu Options”.
30
31
11/12/04 2:43 PM
Page 32
Using Navigation
Setting Playlist
I Playing/Exiting Folder
I Setting Playlist
- Move to the file you want in Navigation mode and press the
¤ Playing Folder
1 Press the
2 Use
,
● When "
English
T6kal ENG0.0
button.
● The selected file will be marked.
button to move to the Navigation mode.
to move to the folder you want and press the
● To exit the playlist setting,
move to the marked file in Navigation mode and press the
button again.
button.
" appears, the selected file will be played.
I Playing Playlist
¤ Exiting Folder Play
1 Press the
1 Press and hold the A↔B button in music mode or select Playlist in Menu.
button during folder playback to move to the Navigation mode.
● The playlist you set will be displayed.
2 Move to the file you want to play and press the
2 Use
,
to move to the file you want and press the
● After folder play is released, "
32
button.
●“
button.
” mark appears and the selected file will be played.
" mark will appear and the selected file will be played.
33
11/12/04 2:43 PM
Page 34
Setting the Advanced Functions
Selecting the Playmode
1 Select Settings in the MENU. (refer to “MENU Options”)
1 Select Play mode in Settings.
2 In Settings, use
2 In Play mode, use
press the
, to move to the function you want and
button to select.
● To move to a previous menu, use
the
English
T6kal ENG0.0
, to move to the mode you want and press
button to select.
or select Return.
● Normal: To play all the tracks in order one time.
● Repeat one: To repeat one track.
● Repeat all: To repeat all tracks.
● Shuffle: To play tracks at random.
● Intro: To listen to the first part of all saved tracks for 10 seconds.
● Return: To move to a previous menu
34
35
11/12/04 2:43 PM
Page 36
Setting the EQ mode
Setting the EQ mode
1 Select My Sound in Settings.
2 In My Sound, use , to move to the sound mode you want and press
the
I WOW Set
English
T6kal ENG0.0
● Use
, to select the SRS function you want and
then press the
button.
button.
● The SRS function is applied only when you select the
SRS, TruBass or WOW in the Preset EQ.
● SRS :
I Preset EQ
● Use , to move to the sound mode you want and then press the
● SRS → TruBass → WOW → Normal → Classic → Jazz → Rock → User
● Select User EQ Set to set the EQ as dedired.
button.
● TruBass : This is a bass boost feature that adds fullness
to the sound.
Use , to adjust TruBass from 0 to 10.
● Focus :
I Bass Booster
● Use , to select Bass Booster On or Off and then
press the
button.
● Bass Booster function is applied only when you select
Normal, Classic, Jazz or Rock in the Preset EQ.
● On: When the music is played back, the bass is
enhanced in the preset sound.
● Off: Music is played back in the preset sound.
36
You will hear 3D Stereo sound.
Use , to adjust SRS from 0 to 10.
You can enjoy clearer tone during playback.
Use , to set Focus and then
press the
button.
High → Middle → Low
● Optimum : Optimize the SRS function according to the device
connected to the main unit.
Use , to move to the connected device and
then press the
button.
Earphone → Headphone → Speaker → Carpack
37
11/12/04 2:43 PM
Page 38
Setting the EQ mode
I User EQ Set
● If User is selected in Preset EQ, EQ can be set to your
preference in the User EQ Set.
● Use , to move to right or left and use
,
to
adjust the level.
Press the
is a trademark of SRS Labs, Inc.
WOW technology is incorporated under license from SRS labs, Inc..
- Please adjust the volume to a suitable level, as the volume may increase in the SRS setting.
- This unit supports sampling frequencies of 32KHz, 44.1KHz or 48KHz.
- The SRS function is not set for voice recording files.
38
Select Display in Settings.
¤ Scroll Speed
● Use
, to set the scroll speed from X1 to X5 to adjust
the speed of the track title movement.
key after completing the setting.
✍ Note
-
Display
English
T6kal ENG0.0
¤ Display Time
● Use
, to select the display time.
● Count Up: Current playback time is displayed.
● Count Down: Remaining time from total playback time is
displayed.
● Total Time: Total playback time is displayed.
39
11/12/04 2:43 PM
Page 40
Display
¤ Backlight
[ Jog ]
● Use
, to set the
Light-On time from
Off to 60 seconds.
● When set to On, the Light stays on continuously.
Display
¤ Tag
English
T6kal ENG0.0
● Use , to select Tag On or Off.
● On: Display the Tag information if the music file has Tag
information. Display the file name if the music file has no
Tag information.
● Off: Display the name of music file.
[ LCD ]
● Use
, to set the LCD Light-Off time from
Off to 60 seconds
● When set to On, the Light stays on continuously.
¤ Language
● Use , keys to select the language for displaying Tag information and menu.
● Chinese(S) → Chinese(T) → English → French → German →
Italian → Japanese → Korean → Rusian → Spanish
¤ Contrast
● Use
, to set the contrast from 0 to 10 to adjust the
brightness of the screen.
40
41
T6kal ENG0.0
11/12/04 2:43 PM
Page 42
Setting the System
Setting the System
Select System in Settings.
● Use , to select Resume On or Off.
● On: Play back music from the part of music you listened last
if you play it back again after stopping.
● Off: Play back music from the beginning of music if you play
it back again after stopping.
¤ Tuner Level
English
¤ Resume
● Use , to select FM Tuner Sensitivity.
● The higher the FM Tuner Sensitivity,
the more frequency it can receive .
● High → Middle → Low
¤ Default Set
¤ Default vol
● Use , to set the default volume from 0 to 30(Max).
● If the power is turned on again after having adjusted the
volume above the default value, music is played at the
default volume.
● If the power is turned on again after the volume was set to
within the default value, the music is replayed at the previously
played volume.
● Use , to select Default Set Yes or No.
● Yes : All settings selected will be initialized.
● No : All settings selected will remain as they are.
¤ About
● If you select About, you can check version information,
total number of tracks and remaining capacity.
¤ Tuner Region
● Use , to select FM Tuner Region.
● Worldwide : Search FM frequency between 87.5MHz to
108.00MHz in the increase of 50 KHz.
● US : Search FM frequency between 87.5MHz to108.0MHz in
the increase of 100 KHz.
● Japan : Search FM frequency between 76.0MHz to 108.0MHz
in the increase of 100 KHz.
42
43
T6kal ENG0.0
11/12/04 2:43 PM
Page 44
Encoding
Power Off Time
Select Record in Settings.
● Use , to set the encoding bit rate.
● When encoding music into an MP3 file, you can select
one of the following bit rates: 32Kbps, 48Kbps, 64Kbps,
96Kbps and 128Kbps.
¤ AutoSync
● Use , to set the AutoSync Time from 1 to 5 seconds.
● AutoSync Time is a function for separating and saving
MP3 files when there is no sound for a set time during
MP3 encoding.
● In SYNC 1 setting, encoding stops and it moves to Music Mode when
there is no sound for over 1 second during encoding.
● If AutoSync Time is set to Off, encoding keeps going even if there is
no sound, and then it is saved as one file.
English
Select Time in Settings.
¤ Bitrate
¤ Power Off
● Use , to set the Power-Off time from 0 to 30 minites.
● If no button is pressed after play stops, the player will
automatically turn off after the time you set.
● When set to Off, it will not turn off automatically.
10
¤ Auto Sleep
● Use , to set the Sleep time to 15, 30, 60, 90, or 120.
The player will automatically turn off after the time you set.
● 15, 30, 60, 90 and 120 minutes are available for
sleep time, and it will automatically turn off after the
time you set.
● When set to Off, it does not turn off automatically.
¤ Intro Time
● Use , to set the Intro time to 10, 20, 30, or 60 seconds.
● When you select the Intro function, the beginning of all files
will be played back for the seconds you set.
44
45
T6kal ENG0.0
11/12/04 2:43 PM
Page 46
Managing Files
MENU Table
English
Select File in Settings.
I Deleting
MENU
1 Select Delete in File.
2 Use , to move to the file you want to delete and
then press the
Now playing
FM Radio
Navigation
Playlist
Settings
Exit
button.
3 Use
, to move to Confirm and then
press the
button.
● The selected file will be cleared.
I Formatting
1 Select Format in File.
2 Use , to move to Confirm and then
press the
button.
● The player will be formatted.
Play Mode
My Sound
Display
System
Record
Time
File
Normal
Preset EQ
Scroll
Resume
Bit Rate
Power Off
Delete
Repeat One
Bass Booster
Display Time
Default Vol
Auto Sync
Auto Sleep
Format
Repeat All
WOW Set
Backlight
Tuner Region
Shuffle All
User EQ Set
Contrast
Tuner Level
Tag
Default Set
Language
About
Intro
✍ Note
Return
Intro Time
- All files will be deleted when formatting the built-in memory.
- It is recommended that formatting be carried out on a PC that has the provided program installed
as formatting in the Menu may take a long time.
●
46
Use the
button to move and select.
47
11/12/04 2:43 PM
Page 48
Troubleshooting
Troubleshooting
The software doesn’t work
The player keeps being turned off.
● Refer to the System Requirements
● In Stop mode, the power is automatically turned off after ten seconds
(changes depending on settings).
● Check to see if there are files saved in it.
The player does not work and the LCD displays nothing.
● Check the battery capacity
● Check to see if the battery is inserted to the right poles ( + , – )
● After connecting it to PC, execute YP-T6 Updater in the desktop to update the product.
In PLAY mode, music is not played after pressing the
● Check to see if MP3 or WMA files are saved in the built-in memory.
● Check to see if the HOLD button is locked.
Files cannot be downloaded.
● Check to see if the driver is installed correctly in the computer.
● Check the connection between the player and PC.
● Check and/or replace the battery, turn on the play's power.
● Operating system limits the number of files you can save.
Please save your music files by creating a subfolder.
● Check if the memory is full.
Backlight does not work.
● Check the backlight setup.
● When the battery power is low, the backlight will go out.
The buttons do not work.
● Check setting of Hold switch.
● Remove the battery once and then insert it again.
48
button
English
T6kal ENG0.0
Something’s wrong with play time displayed during Play mode.
● “VBR SONG” message is displayed while VBR (Variable Bit Rate) file is playing.
LCD window is dark
● Check Contrast
The file name is not displayed correctly.
● Move to [Settings] ➔ [Display] ➔ [Language] in the Menu and then change the
language setting.
There is a file saved in yepp, but “No File” appears in the screen.
● After checking whether the folder is played, use the Navigation function to change
the folder.
● After connecting it to PC, execute YP-T6 Updater in the desktop to update the product.
I cannot properly connect it to PC.
● Win98 : try to connect again after installing yepp Driver.
● WinME : remove the yepp Driver program and press the Start in the desktop to execute
Windows Update. After selecting important update and service pack, execute update all.
● Win2000/XP : Try to connect it again after rebooting PC.
49
11/12/04 2:43 PM
Page 50
Specifications
Model
Built-in Memory capacity
Voltage
Playing time
Dimensions/Weight
Case
Noise Ratio
Earphones Jack Output Power
Output Frequency Range
YP-T6
128MB(YP-T6 H), 256MB(YP-T6 V), 512MB(YP-T6 X), 1GB(YP-T6 Z)
1.5V X 1 (AAA/LR03 size alkaline battery)
lasts up to 20hours (Alkaline battery, MP3 128Kbps, Vol level 15)
22 X 55 X23 mm / 30 g (without battery)
Plastic/Aluminuma
89dB with 20KHz LPF
10mW/CH (16 Ω)
20Hz~20KHz
Operating Temperature Range
-5 ~ +35°C(23~95°F)
FM Frequency
87.50 ~ 108.00 MHz
FM Signal to Noise Ratio
FM T.H.D
FM Useable Sensitiivity
File Support
MEMO
English
T6kal ENG0.0
62dB
1%
10dB
MPEG1/2/2.5 Layer3(8Kbps ~ 320Kbps, 8KHz ~ 48KHz)
WMA, ASF (8Kbps ~ 192Kbps, 8KHz ~ 48KHz), Ogg
50
51
Download PDF