Samsung | SP-43T8HL | Samsung SP-43T8HL 사용자 매뉴얼

BP68-00303A(J60A_Asia_ENG)
5/4/04
5:24 PM
Page 1
COLOR
TELEVISION
SP42Q2
SP43W6
SP43T7
SP43T8/54T8
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
TELETEXT
SELF FOCUS
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:24 PM
Page 2
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:24 PM
Page 3
Important Warranty Information Regarding Television
Format Viewing
ENG
Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are
primarily designed to view standard format full-motion video. The images displayed on them
should primarily be in the standard 4:3 ratio format and constantly moving. Displaying stationary
graphics and images on screen, such as the dark top and bottom letterbox bars (wide screen
pictures), should be limited to no more than 15% of the total television viewing per week.
Wide screen format televisions (16:9, the aspect ratio of the screen width to height) are
primarily designed to view wide screen format full-motion video. The images displayed on them
should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your
model offers this feature, and constantly moving. Displaying stationary graphics and images on
screen, such as the dark side-bars on non-expanded standard format television video and
programming, should be limited to no more than 15% of the total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video
game displays, station logos, web sites or computer graphics and patterns, should be limited as
described above for all televisions. Displaying any stationary images that exceed the above
guidelines can cause uneven aging of picture tubes (CRTs) that leave subtle, but permanent
burned-in ghost images in the television picture. To avoid this, vary the programming and
images, and primarily display full screen moving images, not stationary patterns or dark bars.
On television models that offer picture sizing features, use these controls to view the different
formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven CRT
aging as a result of format selection and use, as well as other burned-in images, is not covered by
your Samsung limited warranty.
3
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:24 PM
Page 4
ENG
Contents
◆ FOREWORD
■
Important Warranty Information Regarding Television Format Viewing ........
3
◆ CONNECTING AND PREPARING YOUR TELEVISION
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Control Panels (depending on the model) .....................................................
6
Connection Panels (depending on the model) ..............................................
7
Using a Display Deck (depending on the model) ..........................................
8
Inserting the Batteries in the Remote Control................................................
8
Infrared Remote Control ................................................................................
9
Connecting to an Aerial or Cable Television Network ...................................
10
Connecting a Satellite Receiver or Decoder..................................................
11
Switching Your Television On and Off...........................................................
12
Placing Your Television in Standby Mode .....................................................
12
Becoming Familiar with the Remote Control .................................................
13
Plug and Play Feature ................................................................................... 14~15
Displaying Information ...................................................................................
15
Choosing Your Language..............................................................................
16
Adjusting the Screen Automatically (Self Focus)...........................................
17
Deactivating the Automatic Execution of the Self Focus ...............................
18
Removing the “Self Focus” from the Display .................................................
19
◆ SETTING THE CHANNELS
■
■
■
■
■
Storing Channels Automatically.....................................................................
20
Sorting the Stored Channels .........................................................................
21
Storing Channels Manually............................................................................ 22~23
Skipping Unwanted Channels .......................................................................
24
Fine Tuning Channel Reception ....................................................................
25
◆ USING YOUR TELEVISION
■
■
■
■
■
■
■
■
■
■
■
■
4
Using the LNA (Low Noise Amplifier) Feature...............................................
26
Changing the Picture Standard .....................................................................
27
Customizing the Picture Settings...................................................................
28
Selecting the Picture Size (4:3 Model) ..........................................................
29
Selecting the Picture Size (Wide Model) ....................................................... 30~31
Selecting the Scan Mode...............................................................................
32
Using the Digital NR (Digital Noise Reduction) Feature ................................
32
Locking the Channel......................................................................................
33
Setting the Blue Screen Mode.......................................................................
34
Freezing the Current Picture .........................................................................
34
Changing the Sound Standard ......................................................................
35
Adjusting the Sound Settings ........................................................................
36
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:24 PM
Page 5
ENG
Contents (continued)
◆ USING YOUR TELEVISION (continued)
■
■
■
■
■
■
■
Extra Sound Settings.....................................................................................
- AUTO VOLUME
- VIRTUAL SURROUND
Setting the Melody Sound .............................................................................
Selecting the Sound Mode (depending on the model) ..................................
Setting and Displaying the Current Time.......................................................
Setting the Sleep Timer .................................................................................
Switching the Television On and Off Automatically .......................................
Viewing an External Signal Source ...............................................................
37
38
39
40
41
42
43
◆ USING THE TELETEXT FEATURE
■
■
■
■
■
Teletext Feature ............................................................................................
Displaying the Teletext Information ...............................................................
Selecting Display Options..............................................................................
Selecting a Teletext Page..............................................................................
Storing Teletext Pages (depending on the model) ........................................
44
45
46
47
48
◆ ADDITIONAL INFORMATION ON CONNECTIONS
■
■
■
■
Connecting to the External Devices ..............................................................
Connecting to the Audio Outputs...................................................................
Connecting to the S-Video Input....................................................................
Connecting to the Component Input..............................................................
49
50
51
52
◆ RECOMMENDATIONS FOR USE
■
■
Programming the Remote Control for Other Components ............................ 53~54
- VCR Remote Control Codes ......................................................................
54
- Cable Box (CATV) Remote Control Codes ................................................
54
- DVD Remote Control Codes ......................................................................
54
Troubleshooting: Before Contacting Service Personnel................................
55
Symbols
Press
☛
Important
➢
Note
5
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:24 PM
Page 6
Control Panels (depending on the model)
➢
ENG
The actual configuration on your TV may be different, depending on
your model.
SP43T7
SP43T8
SP54T8
SP43W6
SP42Q2
( a ) Switch among video input modes
Standby & Timer indicator
( b ) Display the on-screen menu
( g ) Remote control sensor
( c ) Select the channels
( h ) Access to the selected option on the
menu system
( d ) Adjust the volume
( e ) Switch the TV on and off
➢
(f)
(i)
Place the TV in standby mode
◆ You can use the
CH
buttons to switch on the TV when it is in standby mode depending on
the model.
◆ The - VOL + and
CH
buttons have the same function as the ▲/▼/œ/√ buttons
on the remote control.
◆ If the remote control no longer works or your have lost it, you can use controls on the panel of the TV.
6
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:24 PM
Page 7
Connection Panels (depending on the model)
➢
The actual configuration on your TV may be different, depending on
your model.
ENG
Side of the TV
( a ) Video Input
( b ) Audio Input
( c ) S-Video Input
Rear of the TV
( a ) ANT IN VHF/UHF (75Ω)
d
( b ) AV INPUT
(VIDEO/L-AUDIO-R)-1, 2
( c ) AV OUTPUT
(VIDEO / L-AUDIO-R)
( d ) COMPONENT
VIDEO/AUDIO INPUT
c
a
➢
☛
b
For further details about connection, refer to pages 49~52.
Whenever you connect an audio or video system to your television, ensure that all elements are
switched off. Refer to the documentation supplied with your equipment for detailed connection
instructions and associated safety precautions.
.
7
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:24 PM
Page 8
Using a Display Deck (depending on the model)
ENG
You can display a VCR or DVD Player, etc. by using the display
deck.
SP43W6
SP54T8
1
Hold the center of the door and lift it up in the direction of arrow.
2
After placing a component you have in the display deck, hold the
center of the door and pull it down.
➢
SP54T8
You should display only the component that is within
126mm high. When displaying a component in the
display deck, please space it out 30mm from the front,
20mm from either end.
Inserting the Batteries in the Remote Control
You must insert or replace the batteries in the remote control when
you:
◆ Purchase the television
◆ Find that the remote control is no longer operating
correctly
8
1
Remove the cover on the rear of the remote control by pressing
the symbol ( ) downwards and then pulling firmly to remove it.
2
Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking
care to respect the polarities:
◆ + on the battery against + on the remote control
◆ - on the battery against - on the remote control
3
Replace the cover by aligning it with the base of the remote
control and pressing it back into place.
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:24 PM
Page 9
Infrared Remote Control
ENG
TELEVISION STANDBY
PICTURE SIZE/
TELETEXT SIZE SELECTION
TUNER/CABLE NETWORK
SELECTION
MAKE THE REMOTE CONTROL WORKS
FOR TV, STB, VCR, CABLE, DVD
PLAYER
DIRECT CHANNEL SELECTION
ONE OR TWO-DIGIT CHANNEL
SELECTION/
TELETEXT STORE
VOLUME INCREASE
TEMPORARY SOUND SWITCH-OFF
VOLUME DECREASE
TELETEXT DISPLAY/
MIX BOTH TELETEXT INFORMATION
AND THE NORMAL BROADCAST
SWITCH REPEATEDLY BETWEEN THE
LAST TWO CHANNELS DISPLAYED
NEXT CHANNEL/
TELETEXT NEXT PAGE
EXTERNAL INPUT SELECTION/
TELETEXT MODE (LIST/FLOF)
SELECTION
PREVIOUS CHANNEL/
TELETEXT PREVIOUS PAGE
INFORMATION DISPLAY/
TELETEXT REVEAL
EXIT FROM ANY DISPLAY
MENU DISPLAY/
TELETEXT INDEX
CONTROL THE CURSOR
IN THE ON-SCREEN MENU
SOUND EFFECT SELECTIOND
SURROUND ON/OFF DIRECTLY
SELF FOCUS
PICTURE FREEZE
TELETEXT SUB-PAGE
REMOTE CONTROL SETUP
CONFIRM YOUR CHOICE
(STORE OR ENTER)
PICTURE EFFECT SELECTION
SOUND MODE SELECTION
FASTEXT TOPIC SELECTION
AUTOMATIC SWITCH-OFF
VCR/DVD FUNCTIONS;
- REWIND (
)
- STOP ( )
- PLAY/PAUSE (
)
- FAST FORWARD (
)
TELETEXT CANCEL
IF YOUR REMOTE CONTROL IS
NOT FUNCTIONING PROPERLY,
TAKE OUT THE BATTERIES AND
PRESS THE RESET BUTTON FOR
ABOUT 2~3 SECONDS. RE-INSERT
THE BATTERIES AND TRY USING
THE REMOTE CONTROL AGAIN.
➢
TELETEXT PAGE HOLD
The performance of the remote control may be affected by bright light.
9
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:24 PM
Page 10
Connecting to an Aerial or Cable Television Network
ENG
To view television channels correctly, a signal must be received by
the set from one of the following sources:
◆ An outdoor aerial
◆ A cable television network
◆ A satellite network
Rear of the TV
or
Cable Television
Network
10
1
In the first three cases, connect the aerial or network input cable to
the 75Ω coaxial socket on the rear of the television.
2
If you are using an indoor aerial, you may need to turn it when
tuning your television until you obtain a picture that is both sharp
and clear.
For further details, refer to:
◆ “Storing Channels Automatically” on page 20
◆ “Storing Channels Manually” on page 22.
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:24 PM
Page 11
Connecting a Satellite Receiver or Decoder
ENG
In order to watch television programmes broadcast via a satellite
network, you must connect a satellite receiver to the rear of TV.
Also, in order to descramble a coded transmission signal, you must
connect a decoder to the rear of TV.
Rear of the TV
Using a Coaxial cable
Connect a coaxial cable to the:
◆ Receiver (or Decoder) output socket.
◆ Television aerial input socket.
➢
If you wish to connect both a satellite receiver (or decoder)
and a VCR, you should connect the:
◆ Receiver (or Decoder) to the VCR
◆ VCR to the television
Otherwise, connect the receiver (or decoder) directly to the
television.
Satellite receiver/
Decoder
11
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:24 PM
Page 12
Switching Your Television On and Off
ENG
The mains lead is attached to the rear of your television.
1
Plug the mains lead into an appropriate socket.
➢
2
The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
Press the “ I ” button (On/Off) on the front or side of the television.
Result:
3
Press the POWER (
television on.
Result:
➢
4
The Standby indicator on the front of the television
lights up.
) button on the remote control to switch the
The programme that you were watching last is reselected automatically.
If you have not yet stored any channels, No clear picture
appears. Refer to “Storing Channels Automatically” on page
20 or “Storing Channels Manually” on page 22.
To switch your television off, press the “ I ” button (On/Off) again.
Placing Your Television in Standby Mode
Your television can be placed in Standby mode, in order to reduce
the power consumption.
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1
Press the POWER (
Result:
2
The screen is turned off and the Standby indicator on
the front of the television lights up in red.
To switch the television back on, simply press the POWER (
button again.
➢
☛
12
) button on the remote control.
You can also switch on by pressing the TV (
button.
) or P
)
/
Do not leave your television in Standby mode for long
periods of time (when you are away on holiday, for
example). Turn your television off by pressing the “ I ”
button (On/Off) on the front or side of the television. It is
best to unplug the set from the mains and aerial.
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:24 PM
Page 13
Becoming Familiar with the Remote Control
ENG
The remote control is used mainly to:
◆ Change channels and adjust the volume
◆ Set up the television using the on-screen menu system
The following table presents the most frequently used buttons and
their functions.
Button
to
Viewing Function
Menu Function
Used to display the next
stored channel.
-
Used to display the
previous stored channel.
-
Used to display the corresponding channels.
For double digit channels, the second digit must be
pushed immediately after the first. Failure to do this will
result in a single digit channel being displayed.
➢
-/--
Used to select a channel numbered ten or over.
Press this button, and the “--” symbol is displayed.
Enter the two-digit channel number.
PRE-CH
(
)
Press the PRE-CH button. The TV will switch to the last
channel viewed.
To quickly switch between two channels that are far apart,
tune to one channel, then use the numeric buttons to select
second channel. Then, use the PRE-CH button to quickly
alternate between them.
Used to increase the
volume.
-
Used to decrease the
volume.
-
MUTE
(
)
Used to switch the sound off temporarily.
To turn the sound back on, press this button again, or
press the
or
button.
MENU
( )
Used to display the
on-screen menu system.
Used to return to the previous
menu or normal viewing.
-
Used to:
◆ Display a submenu
containing selections for
the current menu option.
◆ Increase/decrease a
menu option value.
-
Used to confirm your choice.
TV
(
)
EXIT
(
)
➢
Used to switch the
television on when it is
in Standby mode.
-
Used to exit from the menu
system and return to normal
viewing directly.
Used to exit from the any
display.
13
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:24 PM
Page 14
Plug and Play Feature
ENG
When the television is initially powered ON, several basic customer
settings proceed automatically and subsequently. The following
settings are available.
PLUG & PLAY
1
LANGUAGE
If the television is in Standby mode, press the POWER (
button on the remote control.
Result:
ENGLISH
2
➢
ENTER
3
ANT. INPUT : CHECK
œ √ SELECT
4
AUTO STORE
TV
AREA
:
CHINA
ASIA W/EUROPE
SEARCH
CHINA
The AUTO STORE menu is displayed with AREA is
selected
Select your area by pressing the ▲ or ▼ button. Press the ENTER
(
) button to confirm your choice.
Result:
5
AUSTRALIA
† MORE
ENTER
RETURN
The AUTO STORE menu is displayed again.
To search the channels, select SEARCH by pressing the ▼ or ▲
button, and then press the œ or √ button. To stop the search
before it has finished or return to normal viewing, press the MENU
(
) button.
Result:
➢
SEARCH
P 1 C-106 MHZ
0 %
RETURN
The options available in the TIME group are displayed
with CLOCK is selected.
Refer to “Storing Channels Automatically” on page 20.
6
Press the ENTER (
7
Press the œ or √ button to move to the hour or minute.
Set the hour or minute by pressing the ▲ or ▼ button.
➢
CLOCK
TV
Make sure that the antenna is connected to the TV, and then
press the œ or √ button.
CIS E/EUROPE
-/+
:
HONKONG U/K
MOVE
The message ANT. INPUT : CHECK is displayed.
If any language is not selected on the LANGUAGE menu, the
LANGUAGE menu will disappear about 30 seconds later.
Result:
RETURN
The message PLUG & PLAY is displayed. It flickers for
a little while and then LANGUAGE menu is automatically
displayed.
Select the appropriate language by pressing the ▼ or ▲ button.
Press the MENU (
) button to enter the language.
Result:
SELECT
8
) button.
Refer to “Setting and Displaying the Current Time” on page
40.
When you have finished, press the MENU (
) button.
CLOCK
11
ADJUST
)
:
00
œ √ MOVE
ENJOY YOUR WATCHING
14
Result:
AM
RETURN
The message ENJOY YOUR WATCHING is displayed,
and then the channel which has been stored will be
activated.
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:24 PM
Page 15
Plug and Play Feature (continued)
ENG
If you want to reset this feature...
SETUP
TV
1
Press the MENU (
Result:
2
) button.
The main menu is displayed.
LANGUAGE
Press the ▲ or ▼ button until the SETUP is selected.
Result:
▼
The options available in the SETUP group are displayed.
Press the ENTER (
4
Press the ▲ or ▼ button until the PLUG & PLAY option is selected.
Press the ENTER (
) button.
Result:
) button.
√
PLUG & PLAY
SELF FOCUS
3
5
√
TIME
BLUE SCREEN
:
ENGLISH
:
OFF
√
√
√
MORE
MOVE
ENTER
This feature starts with the message PLUG & PLAY is
displayed.
For further details on how to set, refer to the opposite page.
Displaying Information
You can view the channel information and setting status you select
by pressing the “INFO (
)” button on the remote control.
P 1
Mono
Picture
Sound
Time
: Dynamic
: Standard
: -- : -- am
15
RETURN
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:24 PM
Page 16
Choosing Your Language
ENG
SETUP
TV
√
TIME
√
PLUG & PLAY
LANGUAGE
:
ENGLISH
▼
MOVE
√
1
√
SELF FOCUS
BLUE SCREEN
When you start using your television for the first time, you must
select the language which will be used for displaying menus and
indications.
:
OFF
Result:
√
MORE
2
ENTER
16
Press the MENU (
RETURN
) button.
The main menu is displayed.
Press the ▲ or ▼ button until the SETUP is selected.
Result:
The options available in the SETUP group are displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the LANGUAGE is selected.
Select your language by pressing the ENTER (
) button.
) button.
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:24 PM
Page 17
Adjusting the Screen Automatically (Self Focus)
ENG
The “Self Focus” feature automatically finds the optimum picture
quality when blurring, overlapping colors or incorrect focus occurs.
These conditions may be caused by moving your TV.
SETUP
TV
√
TIME
1
Press the MENU (
Result:
) button.
LANGUAGE
The main menu is displayed.
Press the ▲ or ▼ button until the SETUP is selected.
Result:
▼
The options available in the SETUP group are displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the SELF FOCUS is selected.
Press the ENTER (
) button.
5
Result:
➢
➢
:
OFF
√
√
√
MOVE
ENTER
RETURN
) button.
The SELF FOCUS is selected.
Press the ENTER (
ENGLISH
MORE
SELF FOCUS
TV
Result:
:
SELF FOCUS
BLUE SCREEN
2
√
PLUG & PLAY
√
SELF FOCUS
AUTO
:
ON
√
MESSAGE
:
ON
√
) button again
The self focus process begins with the message SELF
FOCUS and horizontal bar is displayed. During the
process, minor distortions of the picture may occur. At
this time, the colors may diffuse and a searching action
will appear on the edges of the screen. This is a normal
part of the adjustment. When it is finished, all of things
will disappear and the optimum picture quality can be
enjoyed.
MOVE
ENTER
RETURN
SELF FOCUS
You can also set these options simply by pressing the
SELF FOCUS button.
◆ Changing channels and any other signal changes will
pause the self focus until a stable signal has returned.
It resumes after the signal has been stabilised. This
feature will not work without a signal.
◆ Ambient light that is too bright may affect the self focus.
If this occurs, darken the environment and try again.
17
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:24 PM
Page 18
Deactivating the Automatic Execution of the Self Focus
ENG
SETUP
TV
√
TIME
√
PLUG & PLAY
LANGUAGE
:
ENGLISH
:
OFF
BLUE SCREEN
▼
√
√
SELF FOCUS
The “Self Focus” feature starts on default. It will automatically
begin 1 minutes after switching on the power and the appearance of
the screen image. To set the optimum picture quality, the
“Self Focus” will automatically begin again after another 10
minutes, as the screen image is then fully stabilised.
1
Result:
MORE
MOVE
Press the MENU (
ENTER
RETURN
2
SELF FOCUS
√
SELF FOCUS
AUTO
:
MESSAGE
:
ON
OFF
ON
ON
√
√
ENTER
18
RETURN
The options available in the SETUP group are displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the SELF FOCUS is selected.
Press the ENTER (
) button.
Result:
MOVE
The main menu is displayed.
Press the ▲ or ▼ button until the SETUP is selected.
Result:
TV
) button.
√
) button.
The options available in the SELF FOCUS group are
displayed.
5
Press the ▲ or ▼ button until the AUTO is selected.
Press the ENTER (
) button.
6
To turn off the automatic execution of the self focus feature, select
OFF by pressing the ▲ or ▼ button. Press the ENTER (
)
button to confirm.
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:24 PM
Page 19
Removing the “SELF FOCUS” from the Display
ENG
1
Press the MENU (
) button.
SETUP
TV
Result:
2
The main menu is displayed.
√
TIME
Press the ▲ or ▼ button until the SETUP is selected.
PLUG & PLAY
Result:
SELF FOCUS
LANGUAGE
The options available in the SETUP group are displayed.
BLUE SCREEN
3
Press the ENTER (
4
Press the ▲ or ▼ button until the SELF FOCUS is selected.
Press the ENTER (
) button.
Result:
5
6
) button.
The options available in the SELF FOCUS group are
displayed.
Press the ▲ or ▼ button until the MESSAGE is selected. Press the
ENTER (
) button.
To remove the message SELF FOCUS and horizontal bar on the
screen during the self focus process, select OFF by pressing the
▲ or ▼ button. Press the ENTER (
) button to confirm.
▼
√
:
ENGLISH
:
OFF
√
√
√
MORE
MOVE
ENTER
RETURN
SELF FOCUS
TV
√
SELF FOCUS
AUTO
:
ON
√
MESSAGE
:
ON
OFF
√
ON
MOVE
ENTER
19
RETURN
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:24 PM
Page 20
Storing Channels Automatically
ENG
CHANNEL
TV
AUTO STORE
√
MANUAL STORE
√
ADD/DELETE
√
SORT
√
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or desired
programme numbers. However you can sort numbers manually and
clear any channels you do not wish to watch.
√
FINE TUNE
LNA
:
√
OFF
1
Press the MENU (
Result:
MOVE
ENTER
:
SEARCH
3
CIS E/EUROPE
-/+
CHINA
AUSTRALIA
4
† MORE
ENTER
AREA
:
ASIA W/EUROPE
√
SEARCH
:
-/+
√
) button again.
The AUTO STORE menu is displayed with Area option
selected.
5
Press the ENTER (
) button once again. Select your country
by pressing the ▲ or ▼ button.
The countries are displayed in the following order:
ASIA W/EUROPE - CIS E/EUROPE - CHINA - HONKONG U/K AUSTRALIA - NZ/INDONESIA - SOUTH AFRICA - AMERICA.
6
Press the ENTER (
7
Press the ▲ or ▼ button until the SEARCH is selected. Press the œ
or √ button to start the search.
7
œ √ SEARCH
) button.
The AUTO STORE is selected.
Press the ENTER (
Result :
RETURN
AUTO STORE
MOVE
Press the ENTER (
Result :
HONKONG U/K
TV
The options available in the CHANNEL group are
displayed.
CHINA
ASIA W/EUROPE
:
MOVE
Press the ▲ or ▼ button until the CHANNEL is selected.
Result :
AUTO STORE
AREA
The main menu is displayed.
RETURN
2
TV
) button.
RETURN
) button to confirm your choice
Result :
SEARCH
P 1 C-106 MHZ
➢
20 %
RETURN
9
When searching and storing are complete, the SORT menu is
displayed.
◆ To sort the stored channels into the desired numerical order,
go to Step 6 of the “Sorting the Stored Channels” procedure
on page 21.
◆ To exit from the channel store function without sorting the
channels, press the MENU (
) button repeatedly until the
menus disappear.
10
When the channels have been stored, you can:
◆ Sort them in the order required (see page 21)
◆ Clear a channel (see page 24)
◆ Fine-tune channel reception if necessary (see page 25)
◆ Activate/deactivate the LNA (Low Noise Amplifier) feature
(see page 26)
◆ Activate/deactivate the Digital NR (Digital Noise Reduction)
feature (see page 32)
SORT
TV
FROM
: P 1
TO
: P--
STORE
: ?
MOVE
œ √ ADJUST
20
RETURN
The search will end automatically. Channels are sorted
and stored in an order which reflects their position in
the frequency range, (with lowest first and highest last).
The programme originally selected is then displayed.
To stop the search before it has finished or return to normal
viewing, press the MENU (
) button.
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:24 PM
Page 21
Sorting the Stored Channels
ENG
This operation allows you to change the programme numbers of
stored channels. This operation may be necessary after using auto
store. You can delete the channels you do not want to keep.
1
Press the MENU (
Result:
CHANNEL
TV
) button.
The main menu is displayed.
AUTO STORE
√
MANUAL STORE
√
ADD/DELETE
√
SORT
√
LNA
2
MOVE
The options available in the CHANNEL group are
displayed.
Press the ENTER (
) button.
Press the ▲ or ▼ button until the SORT is selected. Press the
ENTER (
) button.
Result:
Select the channel number that you wish to change by pressing
the œ or √ button repeatedly.
6
Press the ▲ or ▼ button until the TO is selected. Select the new
channel number which you wish to identify by pressing the œ or √
button repeatedly.
ENTER
RETURN
: P 1
TO
: P--
STORE
: ?
MOVE
FROM
The selected channel is exchanged with the one
previously stored to the chosen number.
For all the channels to move to the required channel numbers,
repeat steps 5 to 7 after selecting the FROM by pressing the ▲ or
▼ button.
œ √ ADJUST
RETURN
SORT
TV
Press the ▲ or ▼ button until the Store is selected. Select OK to
confirm the exchange of channel numbers by pressing the ENTER
(
) button.
Result:
8
√
The options available in the SORT group are displayed
with FROM is selected.
5
7
OFF
SORT
TV
FROM
4
:
Press the ▲ or ▼ button until the CHANNEL is selected.
Result :
3
√
FINE TUNE
: P 1
TO
: P 3
STORE
: ?
MOVE
œ √ ADJUST
RETURN
SORT
TV
FROM
: P 3
TO
: P 1
STORE
: OK
MOVE
ENTER
21
RETURN
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:24 PM
Page 22
Storing Channels Manually
ENG
You can store the television channels, including those received via
cable networks.
CHANNEL
TV
AUTO STORE
√
MANUAL STORE
√
ADD/DELETE
√
SORT
√
◆ Whether or not to store each of the channels found
◆ The programme number of each stored channel which
you wish to identify
√
FINE TUNE
LNA
:
MOVE
When storing channels manually, you can choose:
√
OFF
ENTER
RETURN
1
Press the MENU (
Result:
) button.
The main menu is displayed.
MANUAL STORE
TV
2
PROG.NO.
:
P 1
COLOR SYSTEM
:
AUTO
√
SOUND SYSTEM
:
BG
√
SEARCH
:
105MHZ
CHANNEL
:
C 1
STORE
:
?
MOVE
œ √ ADJUST
RETURN
Press the ▲ or ▼ button until the CHANNEL is selected.
Result:
3
Press the ENTER (
4
Press the ▲ or ▼ button until the MANUAL STORE is selected.
Press the ENTER (
) button.
Result:
MANUAL STORE
TV
PROG.NO.
:
P 1
COLOR SYSTEM
:
SOUND SYSTEM
:
AUTO
AUTO
BGPAL
SEARCH
:
CHANNEL
:
STORE
:
MOVE
√
ENTER
6
Press the ▲ or ▼ button until the COLOR SYSTEM is selected.
Press the ENTER (
) button. Indicate the broadcasting
standard required by pressing the ▲ or ▼ button.
RETURN
Result:
:
P 1
COLOR SYSTEM
:
AUTO
√
SOUND SYSTEM
:
BGBG
105MHZ
DK
√
:
CHANNEL
:
STORE
:
MOVE
ENTER
7
Press the ENTER (
8
Press the ▲ or ▼ button until the SOUND SYSTEM is selected.
Press the ENTER (
) button. Select the sound standard
required by pressing the ▲ or ▼ button.
C 1I
? M
Result:
RETURN
9
22
The color standards are displayed in the following
order.
AUTO - PAL - SECAM - NT4.43- NT3.58.
PROG.NO.
SEARCH
The options available in the MANUAL STORE group are
displayed with PROG.NO. is selected.
To assign a programme number to a channel, find the correct
number by pressing the œ or √ button.
MANUAL STORE
TV
) button.
5
√
105MHZ
SECAM
CNT4.43
1
?
NT3.58
The options available in the CHANNEL group are
displayed.
) button to confirm.
The sound standards are displayed in the following
order:
BG - DK - I - M.
Press the ENTER (
) button to confirm.
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:24 PM
Page 23
Storing Channels Manually (continued)
ENG
10
If you know the number of the channel to be stored, see the
following steps.
MANUAL STORE
TV
◆ Press the ▲ or ▼ button until the CHANNEL is selected.
PROG.NO.
:
P 1
COLOR SYSTEM
:
AUTO
√
◆ Press the œ or √ button.
SOUND SYSTEM
:
BG
√
SEARCH
:
105MHZ
CHANNEL
:
C 1
STORE
:
?
◆ Press the ▲ or ▼ button to select C (Air channel) or S (Cable
channel).
◆ Press the œ or √ button.
ADJUST
œ √ MOVE
RETURN
◆ Press the ▲ or ▼ button to select the required number.
➢
11
If no sound or abnormal sound can be heard, re-select the
sound standard required.
If you do not know the channel numbers, select SEARCH by
pressing the ▲ or ▼ button. Press the œ or √ button to start the
search.
Result:
12
13
☛
The tuner scans the frequency range until the first
channel or the channel that you selected is received
on your screen.
To store the channel and associated programme number, select
STORE by pressing the ▲ or ▼ button. Set to OK by pressing the
ENTER (
) button.
◆ S (Cable channel mode): You can select a channel by
entering the assigned number for each cable channel in this
mode.
:
P 1
COLOR SYSTEM
:
AUTO
√
SOUND SYSTEM
:
BG
√
SEARCH
:
105MHZ
CHANNEL
:
C 1
STORE
:
?
œ √ MOVE
RETURN
MANUAL STORE
TV
Channel mode
◆ C (Real channel mode): You can select a channel by
entering the assigned number to each air broadcasting station
in this mode.
PROG.NO.
ADJUST
Repeat Steps 10 to 12 for each channel to be stored.
◆ P (Programme mode): When completing tuning, the
broadcasting stations in your area have been assigned to
position numbers from P00 to max P99. You can select a
channel by entering the position number in this mode.
MANUAL STORE
TV
PROG.NO.
:
P 1
COLOR SYSTEM
:
AUTO
√
SOUND SYSTEM
:
BG
√
SEARCH
:
105MHZ
CHANNEL
:
C 1
STORE
:
?
ADJUST
œ √ SEARCH
RETURN
MANUAL STORE
TV
PROG.NO.
:
P 1
COLOR SYSTEM
:
AUTO
√
SOUND SYSTEM
:
BG
√
SEARCH
:
105MHZ
CHANNEL
:
C 1
STORE
:
OK
MOVE
ENTER
23
RETURN
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:24 PM
Page 24
Skipping Unwanted Channels
ENG
CHANNEL
TV
AUTO STORE
√
MANUAL STORE
√
ADD/DELETE
√
SORT
√
√
FINE TUNE
LNA
You can exclude the channels you chosen from the channels you
scanned. When you scan through the stored channels, those you
have chosen to skip are not displayed.
All of the channels that you do not specifically choose to skip are
displayed during scanning.
:
OFF
√
1
Press the MENU (
Result:
MOVE
ENTER
Press the ▲ or ▼ button until the CHANNEL is selected.
Result:
ADD/DELETE
P 1
:
DELETED
√
P 2
:
DELETDE
√
P 3
:
DELETDE
√
P 4
:
DELETDE
√
Press the ENTER (
4
Press the ▲ or ▼ button until the ADD/DELETE is selected. Press
the ENTER (
) button.
Result:
ENTER
TV
RETURN
:
ADDED
DELETED
√
P 2
:
DELETDE
DELETED
√
P 3
:
DELETDE
√
P 4
:
DELETDE
√
▼
MOVE
ENTER
24
RETURN
) button.
The ADD/DELETE menu is displayed with the current
channel selected.
5
Press the ▲ or ▼ button to delete or add the required channel.
Press the ENTER (
) button.
6
Select DELETED or ADDED by pressing the ▲ or ▼ button.
Press the ENTER (
) button to confirm.
7
Repeat Step 5 for each channel to be erased or added.
ADD/DELETE
P 1
The options available in the CHANNEL group are
displayed.
3
▼
MOVE
The main menu is displayed.
RETURN
2
TV
) button.
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:24 PM
Page 25
Fine Tuning Channel Reception
ENG
If the reception is clear, you do not have to fine tune the channel,
as this is done automatically during the search and store operation.
If the signal is weak or distorted, you may have to fine tune the
channel manually.
1
Press the MENU (
CHANNEL
TV
) button.
AUTO STORE
√
MANUAL STORE
√
ADD/DELETE
√
SORT
√
√
FINE TUNE
Result:
2
The main menu is displayed.
Press the ▲ or ▼ button until the CHANNEL is selected.
Result:
Press the ENTER (
4
Press the ▲ or ▼ button until the FINE TUNE is selected.
Press the ENTER (
) button.
Result:
6
7
MOVE
) button.
TUNE
:
-/+
STORE
:
?
ERASE
:
?
MOVE
ENTER
RETURN
The horizontal bar is displayed.
FINE TUNE
P 2
To memorise adjusted picture or sound, select STORE by pressing
the ▼ or ▲ button. Press the ENTER (
) button.
0
MOVE
œ √ ADJUST
RETURN
OK is displayed.
FINE TUNE
TV
8
RETURN
FINE TUNE
TV
) button.
To obtain a sharp and clear picture and good sound quality, press
the œ or √ button until you reach the setting.
Result:
ENTER
√
OFF
The options available in the FINE TUNE group are
displayed with TUNE is selected.
Press the ENTER (
Result:
:
The options available in the CHANNEL group are
displayed.
3
5
LNA
To erase adjusted picture or sound, select ERASE by pressing the
▼ or ▲ button. Press the ENTER (
) button.
TUNE
:
-/+
STORE
:
OK
Result:
ERASE
:
?
OK is displayed.
MOVE
ENTER
25
RETURN
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:24 PM
Page 26
Using the LNA (Low Noise Amplifier) Feature
ENG
This feature is very useful in the situation that the TV is used in a
weak signal, and amplifies the TV signal in the weak signal area,
but not noise.
CHANNEL
TV
AUTO STORE
√
MANUAL STORE
√
ADD/DELETE
√
SORT
√
√
FINE TUNE
LNA
:
OFF
√
This feature is working only in a weak signal condition, and that is
memorized on relevant channel’s additional information.
1
Press the MENU (
Result:
MOVE
ENTER
Press the ▲ or ▼ button until the CHANNEL is selected.
Result:
CHANNEL
AUTO STORE
√
MANUAL STORE
√
ADD/DELETE
√
√
SORT
√
FINE TUNE
LNA
MOVE
:
ENTER
26
The main menu is displayed.
RETURN
2
TV
) button.
OFF
OFF
ON
3
Press the ENTER (
4
Press the ▲ or ▼ button until the LNA is selected. Press the
ENTER (
) button.
5
Select OFF or ON by pressing the ▲ or ▼ button. Press the
ENTER (
) button to confirm.
√
RETURN
The options available in the CHANNEL group are
displayed.
) button.
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:24 PM
Page 27
Changing the Picture Standard
ENG
You can select the type of picture which best corresponds to your
viewing requirements.
PICTURE
TV
MODE
1
Press the MENU (
Result:
2
COLOR TONE
:
SIZE
:
SCAN MODE
:
DIGITAL NR
:
MOVE
ENTER
) button.
) button again.
The options available are listed.
Select the required option by pressing the ▲ or ▼ button.
Result:
6
:
CUSTOM
The MODE is selected.
Press the ENTER (
Result:
5
The options available in the PICTURE group are
displayed.
Press the ENTER (
Result:
4
The main menu is displayed.
Press the ▲ or ▼ button until the PICTURE is selected.
Result:
3
) button.
The following modes are available:
DYNAMIC - STANDARD - MOVIE - CUSTOM
Press the ENTER (
) button to confirm.
DYNAMIC
➢
You can select these options by simply pressing the
P.MODE (
: Picture Mode) button on the remote
control.
27
DYNAMIC
DYNAMIC
√
STANDARD
NORMAL
MOVIE
√
NORMAL
CUSTOM
AUTO
√
ON
√
√
√
RETURN
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:24 PM
Page 28
Customizing the Picture Settings
ENG
Your television has several settings options that allow you to
control picture quality.
PICTURE
TV
MODE
:
DYNAMIC
√
√
CUSTOM
COLOR TONE
:
√
NORMAL
SIZE
:
NORMAL
√
SCAN MODE
:
AUTO
√
DIGITAL NR
:
ON
√
MOVE
ENTER
1
Press the MENU (
Result:
2
Press the ▲ or ▼ button until the PICTURE is selected.
Result:
RETURN
) button.
The main menu is displayed.
The options available in the PICTURE group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the CUSTOM is selected. Press the
ENTER (
) button.
) button.
CUSTOM
TV
CONTRAST
:
100
√
BRIGHTNESS
:
45
√
SHARPNESS
:
75
√
COLOR
:
55
√
Result:
5
MOVE
ENTER
RETURN
The CUSTOM menu is displayed.
Select the option (CONTRAST, BRIGHTNESS, SHARPNESS, COLOR or
TINT-NTSC only) to be adjusted by pressing the ▲ or ▼ button.
Press the ENTER (
) button.
Result:
The horizontal bar is displayed. Move the horizontal
bar’s cursor left or right by pressing the œ or √ button.
Contrast
100
MOVE
œ √ ADJUST
MODE
:
COLOR TONE
:
SIZE
:
SCAN MODE
:
DIGITAL NR
:
MOVE
ENTER
28
7
Select the required option by pressing the ▲ or ▼ button.
Result:
DYNAMIC
CUSTOM
Press the MENU (
) button to return the PICTURE menu.
Press the ▲ or ▼ button until the COLOR TONE is selected. Press
the ENTER (
) button.
RETURN
PICTURE
TV
6
NORMAL
NORMAL
WARM1
√
√
√
NORMAL
WARM2
AUTO
COOL2
√
ON
COOL1
√
√
RETURN
The following modes are available:
NORMAL - WARM 1 - WARM 2 - COOL 2 - COOL 1
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:25 PM
Page 29
Selecting the Picture Size (4:3 Model)
ENG
You can select the picture size which best corresponds to your
viewing requirements.
PICTURE
TV
1
2
Press the MENU (
) button.
The main menu is displayed.
Result:
MODE
Press the ▲ or ▼ button until the PICTURE is selected.
Result : The options available in the PICTURE group are
displayed.
Press the ENTER (
4
Press the ▲ or ▼ button until the SIZE is selected. Press the
ENTER (
) button.
Result : The SIZE menu is displayed.
5
NORMAL
Adjusts the picture to fit into a 4:3 normal aspect
ratio. (Prolonged use in 4:3 mode may cause the
lifespan of the CRT to be reduced.)
ZOOM1
Vertically enlarges the picture approximately 130%.
ZOOM2
Vertically enlarges the picture about approximately
150%.
CINEMA
When the top and bottom of the screen margin are
black (blank), they will change to gray.
➢
√
:
NORMAL
√
SIZE
:
NORMAL
√
SCAN MODE
:
AUTO
√
DIGITAL NR
:
ON
√
ENTER
NORMAL
ZOOM1
ZOOM2
CINEMA
MOVE
ENTER
You can select these options by simply pressing
the P.SIZE (
) button on the remote control.
4:3 Signal
ZOOM1
ZOOM2
CINEMA
ZOOM1
ZOOM2
CINEMA
16:9 Signal
NORMAL
RETURN
SIZE
TV
Lifting is available in the ZOOM1 or ZOOM2 mode by pressing
the ▲ or ▼ button
NORMAL
√
) button.
Select the required mode by pressing the ▲ or ▼ button. Press
the ENTER (
) button.
Result : The following modes are available:
➢
DYNAMIC
COLOR TONE
MOVE
3
:
CUSTOM
29
RETURN
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:25 PM
Page 30
Selecting the Picture Size (Wide Model)
ENG
You can select the picture size which best corresponds to your
viewing requirements.
PICTURE
TV
MODE
:
DYNAMIC
COLOR TONE
√
√
CUSTOM
:
NORMAL
√
SIZE
:
16:9
√
SCAN MODE
:
AUTO
√
DIGITAL NR
:
ON
√
MOVE
ENTER
16:9
PANORAMA
ZOOM1
ZOOM2
4:3
CINEMA1
CINEMA2
MOVE
Press the MENU (
) button.
Result:
The main menu is displayed.
2
Press the ▲ or ▼ button until the PICTURE is selected.
Result:
The options available in the PICTURE group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the SIZE is selected. Press the
ENTER (
) button.
Result:
The SIZE menu is displayed.
5
Select the required mode by pressing the ▲ or ▼ button. Press
the ENTER (
) button.
RETURN
SIZE
TV
1
Result :
ENTER
RETURN
) button.
The following modes are available:
16:9
Adjusts the picture to fit into the 16:9 wide aspect
ratio.
PANORAMA
Adjusts a Wide picture to appear natural.
ZOOM1
Vertically enlarges the picture approximately 130%.
ZOOM2
Vertically enlarges the picture about approximately
150%.
4:3
Adjusts the picture to fit into a 4:3 normal aspect
ratio. (Prolonged use in 4:3 mode may cause the
lifespan of the CRT to be reduced.)
CINEMA1
To maintain optimum screen display, the picture is
vertically enlarged and the letterboxed (black margin)
area is filled with gray instead.
CINEMA2
When the top and bottom of the screen margin are
black (blank), they will change to gray.
➢
◆ Lifting is available in the ZOOM1 or ZOOM2 mode by
pressing the ▲ or ▼ button.
◆ Subtitles may be cut-off or hidden below the screen area
in ZOOM1, Zoom2,
Zoom2 CINEMA1 and CINEMA2 modes.
➢
30
You can select these options by simply pressing the
P.SIZE (
) button on the remote control.
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:25 PM
Page 31
Selecting the Picture Size (Wide Model) (continued)
ENG
4:3 Signal
16:9
PANORAMA
ZOOM1
16:9
Panorama
Zoom1
4:3
CINEMA1
4:3
Cinema1
Cinema2
16:9
PANORAMA
ZOOM1
16:9
Panorama
Zoom1
4:3
CINEMA1
4:3
Cinema1
ZOOM2
Zoom2
CINEMA2
16:9 Signal
ZOOM2
Zoom2
CINEMA2
Cinema2
31
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:25 PM
Page 32
Selecting the Scan Mode
ENG
PICTURE
TV
MODE
:
DYNAMIC
√
√
CUSTOM
COLOR TONE
:
NORMAL
√
SIZE
:
NORMAL
√
SCAN MODE
:
AUTO
√
DIGITAL NR
:
ON
√
MOVE
ENTER
RETURN
You will normally find that scan mode is best set to Natural to
reduce any slight picture flicker. However, it is possible that some
occasional broadcasts (NTSC-M) may benefit by changing the scan
mode.
1
Press the MENU (
Result:
2
PICTURE
MODE
:
DYNAMIC
The options available in the PICTURE group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the SCAN MODE is selected.
Press the ENTER (
) button.
) button.
√
CUSTOM
COLOR TONE
:
SIZE
:
SCAN MODE
:
DIGITAL NR
:
MOVE
√
The main menu is displayed.
Press the ▲ or ▼ button until the PICTURE is selected.
Result:
TV
) button.
NORMAL
AUTO
NORMAL
NATURAL
√
AUTO
DIGITAL
ON
PROG.
√
ENTER
√
√
5
Select the required option by pressing the ▲ or ▼ button.
Result:
RETURN
6
The following modes are available:
AUTO - NATURAL - DIGITAL - PROG.
Press the ENTER (
) button to confirm.
Using the Digital NR (Digital Noise Reduction) Feature
If the signal received by your television is weak, you can activate
this feature to help reduce any static and ghosting that may appear
on the screen.
PICTURE
TV
MODE
:
DYNAMIC
√
√
CUSTOM
COLOR TONE
:
NORMAL
√
SIZE
:
NORMAL
√
SCAN MODE
:
AUTO
√
DIGITAL NR
:
ON
√
1
Result:
2
MOVE
ENTER
RETURN
PICTURE
TV
MODE
:
DYNAMIC
:
NORMAL
√
SIZE
:
NORMAL
√
SCAN MODE
:
√
DIGITAL NR
:
AUTO
OFF
ONON
COLOR TONE
MOVE
ENTER
32
) button.
The main menu is displayed.
Press the ▲ or ▼ button until the PICTURE is selected.
Result:
The options available in the PICTURE group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the DIGITAL NR is selected.
Press the ENTER (
) button.
5
Select OFF or ON by pressing the ▲ or ▼ button. Press the
ENTER (
) button to confirm.
) button.
√
√
CUSTOM
Press the MENU (
√
RETURN
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:25 PM
Page 33
Locking the Channel
ENG
This feature allows you to lock the television so that it cannot be
switched on via the front panel. It can, however, still be switched
on via the remote control. Thus, by keeping the remote control
away from unauthorised users, such as children, you can prevent
them from watching unsuitable programmes.
SETUP
TV
▲
MORE
MELODY
:
√
ON
√
CHILD LOCK
1
Press the MENU (
Result:
) button.
The main menu is displayed.
MOVE
2
ENTER
Press the ▲ or ▼ button until the SETUP is selected.
Result:
The options available in the SETUP group are displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the CHILD LOCK is selected.
Press the ENTER (
) button.
Result:
CHILD LOCK
TV
) button.
6
7
:
ON
OFF
PROG.NO.
:
PON 2
LOCK
:
?
The CHILD LOCK menu is displayed with CHILD LOCK
option is selected.
Press the ENTER (
) button again.
To activate this feature, select OFF or ON by pressing the ▲ or ▼
button. Press the ENTER (
) button to confirm.
Press the ▲ or ▼ button until the LOCK is selected.
To lock the channel selected, press the ENTER (
➢
ENTER
RETURN
CHILD LOCK
TV
Press the ▲ or ▼ button until the PROG.NO. is selected.
Select the channel to be locked by pressing the œ or √ button.
Result:
√
CHILD LOCK
MOVE
5
RETURN
CHILD LOCK
:
ON
PROG.NO.
:
P
LOCK
:
?
√
2
) button.
The LOCKED is displayed.
If you want to unlock the channel selected, set CHILD
LOCK to OFF.
MOVE
œ √ ADJUST
RETURN
CHILDLOCK
TV
√
CHILD LOCK
:
ON
PROG.NO.
:
P
LOCK
:
LOCKED
MOVE
ENTER
33
2
RETURN
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:25 PM
Page 34
Setting the Blue Screen Mode
ENG
SETUP
TV
√
TIME
√
PLUG & PLAY
LANGUAGE
:
ENGLISH
:
OFF
BLUE SCREEN
▼
√
√
SELF FOCUS
If no signal is being received or the signal is very weak, a blue
screen automatically replaces the noisy picture background. If you
wish to continue viewing the poor picture, you must set the BLUE
SCREEN mode to OFF.
1
√
Result:
MORE
MOVE
ENTER
RETURN
Press the MENU (
2
SETUP
√
TIME
√
PLUG & PLAY
LANGUAGE
:
ENGLISH
:
OFF
OFF
▼
MOVE
The options available in the SETUP group are displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the BLUE SCREEN is selected.
Press the ENTER (
) button.
5
Select OFF or ON by pressing the ▲ or ▼ button. Press the
ENTER (
) button to confirm.
√
) button.
√
SELF FOCUS
BLUE SCREEN
The main menu is displayed.
Press the ▲ or ▼ button until the SETUP is selected.
Result:
TV
) button.
√
ON
MORE
ENTER
RETURN
Freezing the Current Picture
You can freeze the picture when watching a television programme
simply by pressing the “STILL (
)” button. To return to normal
viewing, press it again.
34
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:25 PM
Page 35
Changing the Sound Standard
ENG
You can select the type of special sound effect to be used when
watching a given broadcast.
SOUND
TV
1
Press the MENU (
Result:
) button.
The main menu is displayed.
MODE
:
EQUALIZER
AUTO VOLUME
DOLBY VIRTUAL
2
ENTER
) button.
The MODE is selected.
4
Press the ENTER (
5
Select the required option by pressing the ▲ or ▼ button.
Result:
) button again.
The following modes are available:
STANDARD - MUSIC - SPEECH - MOVIE CUSTOM.
6
Press the ENTER (
) button to confirm.
STANDARD
➢
√
√
The options available in the SOUND group are displayed.
Press the ENTER (
Result:
√
CUSTOM
MOVE
3
√
MUSIC
: SPEECH
OFF
: MOVIE
OFF
Press the ▲ or ▼ button until the SOUND is selected.
Result:
STANDARD
OFF
You can select these options by simply pressing the
S.MODE (
: Sound Mode) button on the remote
control.
35
RETURN
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:25 PM
Page 36
Adjusting the Sound Settings
ENG
The sound settings can be adjusted to suit your personal preferences.
SOUND
TV
MODE
:
STANDARD
√
1
Result:
√
EQUALIZER
AUTO VOLUME
:
OFF
√
DOLBY VIRTUAL
:
OFF
√
Press the MENU (
2
ENTER
TV
RETURN
The main menu is displayed.
Press the ▲ or ▼ button until the SOUND is selected.
Result:
MOVE
) button.
The options available in the SOUND group are displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the EQUALIZER is selected.
Press the ENTER (
) button.
) button.
EQUALIZER
Result:
R
5
L
100 300 1K
ADJUST
œ √ MOVE
36
3K
The EQUALIZER menu is displayed with the current
option.
Select the option to be adjusted by pressing the œ or √ button.
Press the ▲ or ▼ button to reach the required setting.
10K
RETURN
➢
If you make any changes to these settings, the sound
standard is automatically switched to Custom.
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:25 PM
Page 37
Extra Sound Settings
ENG
◆ AUTO VOLUME
Each broadcasting station has its own signal conditions, and
so it is not easy for you to adjust the volume every time the
channel is changed. This feature lets you automatically adjust
the volume of the desired channel by lowering the sound
output when the modulation signal is high or by raising the
sound output when the modulation signal is low.
SOUND
TV
MODE
◆ DOLBY VIRTUAL
STANDARD
:
DOLBY VIRTUAL
:
Press the MENU (
Result:
2
ENTER
RETURN
MODE
:
STANDARD
√
√
AUTO VOLUME
:
OFF
√
DOLBY VIRTUAL
:
OFF
OFF
√
ON
The main menu is displayed.
MOVE
ENTER
The options available in the SOUND group are displayed.
3
Press the ENTER (
4
Select the required option (AUTO VOLUME or DOLBY VIRTUAL) by
pressing the ▲ or ▼ button.
5
Press the ENTER (
6
To activate each feature, select ON by pressing the ▲ or ▼
button. Press the ENTER (
) button.
➢
√
SOUND
TV
) button.
Press the ▲ or ▼ button until the SOUND is selected.
Result:
√
OFF
OFF
ONOFF
EQUALIZER
1
√
√
AUTO VOLUME
MOVE
This feature converts a monaural sound signal into two
identical left and right channels. Once the DOLBY VIRTUAL
is set to OFF or ON, the setting applies to the sound effects
such as STANDARD, MUSIC, SPEECHand MOVIE.
:
EQUALIZER
) button.
) button.
Manufactured under license from Dolby
Laboratories. “Dolby’ and the double-D
symbol
are trademarks of Dolby
Laboratories.
37
RETURN
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:25 PM
Page 38
Setting the Melody Sound
ENG
You can hear clear melody sound when the television is powered
on or off.
SETUP
TV
▲
MORE
MELODY
:
ON
√
1
√
CHILD LOCK
2
MOVE
ENTER
▲
:
CHILD LOCK
MOVE
ENTER
38
ON
OFF
√
ON
√
RETURN
The options available in the SETUP group are displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the MELODY is selected. Press the
ENTER (
) button.
5
Select the required option (OFF or ON) by pressing the ▲ or ▼
button.
6
Press the ENTER (
MORE
MELODY
) button.
The main menu is displayed.
Press the ▲ or ▼ button until the SETUP is selected.
Result:
RETURN
SETUP
TV
Press the MENU (
Result:
) button.
) button to confirm.
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:25 PM
Page 39
Selecting the Sound Mode (depending on the model)
ENG
The “DUAL I-II” button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either “DUAL I ” or “STEREO”, depending on
the current transmission.
Regular broadcast
(Standard audio)
MONO (Normal use)
Regular +
NICAM Mono
NICAM ↔ MONO
MONO
(Normal)
NICAM Stereo
NICAM ↔ MONO
STEREO
(Normal)
NICAM Dual I/II
NICAM → NICAM → MONO
DUAL I DUAL II (Normal)
A2
STEREO
Regular broadcast
(Standard audio)
MONO (Normal use)
Bilingual or Dual I/II
DUAL I ↔ DUAL II
Stereo
➢
→
On-screen indication
→
NICAM
STEREO
Type of broadcast
STEREO ↔ MONO
(Forced mono)
◆ If the receiving conditions deteriorate, listening will be
easier if the mode is set to the MONO.
◆ If the stereo signal is weak and an automatic switching
occurs, then switch to the MONO.
◆ When receiving a mono sound in the AV mode, connect
to the “AUDIO-L” input connector on the panel (front or
side). If the mono sound comes out only from left
speaker, press the DUAL I-II button.
39
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:25 PM
Page 40
Setting and Displaying the Current Time
ENG
SETUP
TV
√
TIME
➢
√
PLUG & PLAY
LANGUAGE
:
ENGLISH
√
√
SELF FOCUS
BLUE SCREEN
▼
You can set the television’s clock so that the current time is displayed
by pressing the “INFO (
)” button. You must also set the time if
you wish to use the automatic on or off timers.
:
√
OFF
MORE
1
MOVE
ENTER
When pressing the “ I ” button (On/Off) on the front of
the television, the clock setting will be reset.
Press the MENU (
Result:
2
TIME
TV
AM
:
-- : --
:
OFF
ON TIMER
:
-- : --
AM
√
-- : --
AM
√
MOVE
:
The main menu is displayed.
Press the ▲ or ▼ button until the SETUP is selected.
Result:
√
CLOCK
SLEEP TIMER
OFF TIMER
) button.
RETURN
The options available in the SETUP group are displayed.
√
ENTER
3
Press the ENTER (
4
Press the ▲ or ▼ button until the TIME is selected. Press the
ENTER (
) button.
Result:
RETURN
) button.
The options available in the TIME group are displayed
with CLOCK is selected.
5
Press the ENTER (
6
Press the ¦ or ‹button to move to the hour or minute. Set the
hour or minute by pressing the ▲ or ▼ button.
) button.
CLOCK
TV
CLOCK
11
ADJUST
:
œ √ MOVE
40
00
AM
RETURN
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:25 PM
Page 41
Setting the Sleep Timer
ENG
You can select a time period of between 30 and 180 minutes after
which the television automatically switches to Standby mode.
SETUP
TV
√
TIME
√
PLUG & PLAY
1
Press the MENU (
Result:
) button.
LANGUAGE
Press the ▲ or ▼ button until the SETUP is selected.
Result:
▼
Press the ENTER (
4
Press the ▲ or ▼ button until the TIME is selected. Press the
ENTER (
) button.
:
OFF
√
ENTER
The options available in the TIME group are displayed.
5
Press the ▲ or ▼ button until the SLEEP TIMER is selected.
Press the ENTER (
) button.
6
Select the preset time interval (OFF, 30, 60, 90, 120, 150, 180) for
staying on by pressing the ▲ or ▼ button.
Press the ENTER (
) button to confirm.
RETURN
TIME
11 : 35
SLEEP TIMER
:
OFF
ON TIMER
:
-- : --
AM
√
OFF TIMER
:
-- : --
AM
√
ENTER
√
RETURN
TIME
TV
SLEEP TIMER
ON TIMER
OFF TIMER
◆ If the sleep timer is not yet set, OFF is displayed.
If the sleep timer is already set, the remaining time
before which the television switches to Standby mode
is displayed.
√
:
CLOCK
◆ You can also set these options simply by pressing the
SLEEP ( ) button.
AM
CLOCK
MOVE
➢
√
) button.
TV
Result:
√
MORE
MOVE
The options available in the SETUP group are displayed.
3
ENGLISH
SELF FOCUS
The main menu is displayed.
BLUE SCREEN
2
:
MOVE
: OFF
11 : 35
: 30 OFF
60
: -- : -90
: 120
-- : -150
180
ENTER
OFF
41
AM
√
√
AM
√
AM
√
RETURN
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:25 PM
Page 42
Switching the Television On and Off Automatically
ENG
You can set the On/Off timers so that the television will:
√
◆ Switch on automatically and tune to the channel of your
choice at the time you select
√
◆ Switch off automatically at the time you select
SETUP
TV
TIME
PLUG & PLAY
LANGUAGE
:
ENGLISH
:
OFF
➢
√
SELF FOCUS
BLUE SCREEN
▼
√
√
MORE
MOVE
ENTER
RETURN
1
Press the MENU (
Result:
TIME
TV
CLOCK
:
11 : 35
SLEEP TIMER
:
30
AM
√
√
ON TIMER
:
-- : --
AM
√
OFF TIMER
:
-- : --
AM
√
MOVE
ENTER
Result:
4
Press the ▲ or ▼ button until the TIME is selected. Press the
ENTER (
) button.
5
Press the ▲ or ▼ button until the ON TIMER is selected. Press the
ENTER (
) button.
The options available in the ON TIMER group are
Result:
displayed.
6
Select the ON TIMER (hour or minute), PROG. (programme
number) or VOL. Press the œ or √ button to set these by pressing
the ▲ or ▼ button.
RETURN
7
To activate the ON TIME with the settings satisfied, select
ACTIVATION to by pressing the œ or √ button,then select YES by
pressing the ▲ or ▼ button.
√
8
Press the MENU (
) button.
Result:
The options available in the TIME group are displayed
again.
9
Press the ▲ or ▼ button until the OFF TIMER is selected. Press
the ENTER (
) button.
The OFF TIMER menu is displayed.
Result:
10
Set the OFF TIMER as methods for ON TIMER setting.
AM
VOL
P1
10
ACTIVATION
YES
ADJUST
œ √ MOVE
The options available in the SETUP group are displayed.
Press the ENTER (
ON TIMER
PROG.
The main menu is displayed.
3
RETURN
06 : 00
) button.
Press the ▲ or ▼ button until the SETUP is selected.
2
ON TIMER
TV
The first step is to set the television’s clock (refer to “Setting
the Current Time” on page 40). If you have not yet set the
clock, the message Set the clock first is displayed.
) button.
TIME
TV
:
SLEEP TIMER
:
30
ON TIMER
:
11 : 35
AM
√
OFF TIMER
:
-- : --
AM
√
MOVE
11 : 35
AM
CLOCK
ENTER
√
RETURN
➢
OFF TIMER
TV
OFF TIMER
06 : 00
AM
ACTIVATION
YES
ADJUST
œ √ MOVE
42
RETURN
Absent Power Off
When you set the timer “On”, your television will
eventually be turned off, if you do not operate any controls
during the 3 hours after the TV is turned on by timer.
This function is available in only the timer “On” mode and
will prevent a leakage accident or overheating, caused by
your TV left on for a long time due to the timer “On”
(when you are away on holiday, for example).
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:25 PM
Page 43
Viewing an External Signal Source
ENG
Use the remote control to switch between viewing signals from
connected equipment, such as VCR, DVD, Set-Top Box and the TV
source (broadcast or cable)
INPUT
TV
SOURCE LIST
:
√
TV
√
EDIT NAME
1
Press the MENU (
Result:
2
3
The options available in the INPUT group are
displayed.
Press the ENTER (
Result:
) button.
) button.
MOVE
ENTER
RETURN
The SOURCE LIST is selected.
Press the ENTER (
) button again.
SOURCE LIST
TV
TV
4
Press the ▲ or ▼ button to select signal source, then press the
ENTER (
) button.
➢
◆ When you connect equipment to the TV, you can choose
between the following sets of jacks : AV1, AV2,
COMPONENT1 or COMPONENT2 on the TV’s rear panel, and
AV3 or S-VIDEO on the TV’s side panel.
AV1
: ------
AV2
: ------
AV3
: ------
S-VIDEO
: ------
▼
MORE
MOVE
ENTER
RETURN
◆ You can select these options simply by pressing the
SOURCE (
) button.
INPUT
TV
5
Press the MENU (
Result:
) button.
Press the ▲ or ▼ button until the EDIT NAME is selected.
Press the ENTER (
) button.
7
Press the ▲ or ▼ button to select the external source to be edited.
Press the ENTER (
) button.
The device names available are listed.
Result:
VCR - DVD - CABLE STB - HD STB - SAT. STB AV RECV. - DVD RECV. - GAME - CAMCORDER DVD COMBO - DHR (DVD HDD Recorder).
Select the required device by pressing the ▲ or ▼ button.
Press the ENTER (
) button to confirm.
MOVE
√
TV
√
ENTER
RETURN
EDIT NAME
TV
AV1
: - - - --------
√
AV2
: - - - - -VCR
-
√
AV3
: - - - - -DVD
-
√
S-VIDEO
: - - -CABLE
- - - STB
: - - - -HD
- -STB
√
: - - -SAT.
- - - STB
† MORE
√
COMPONENT1
COMPONENT2
Move
➢
:
EDIT NAME
The options available in the INPUT group are
displayed again.
6
8
SOURCE LIST
Enter
If you change the external source while viewing, pictures
might take a short period of time to be switched.
43
√
Return
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:25 PM
Page 44
Teletext Feature
ENG
Most television channels provide written information services via
teletext. Information provided includes:
◆ Television programme times
◆ News bulletins and weather forecasts
◆ Sports results
◆ Travel information
This information is divided into numbered pages (see diagram).
Part
Contents
A
Selected page number.
B
Broadcasting channel identity.
C
Current page number or search indications.
D
Date and time.
E
Text.
F
Status information.
FASTEXT information.
➢
Teletext information is often divided between several pages
displayed in sequence, which can be accessed by:
◆ Entering the page number
◆ Selecting a title in a list
◆ Selecting a colored heading (FASTEXT system)
44
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:25 PM
Page 45
Displaying the Teletext Information
ENG
You can display Teletext information at any time on your television.
Teletext information to be displayed correctly,
☛ For
channel reception must be stable; otherwise:
◆ Information may be missing
◆ Some pages may not be displayed
1
Select the channel providing the Teletext service using the P
or
button.
2
Press the TTX/MIX (
) button to activate the teletext mode.
The contents page is displayed. It can be redisplayed
Result:
at any time by pressing the
(index) button.
3
Press the TTX/MIX (
) button again.
The screen will be split into two. This Double Teletext
Result:
feature lets you view the actual broadcast and teletext
information separately on the screen.
4
If you wish to display the actual broadcast at the same time as
the teletext page, press the TTX/MIX (
) button again.
5
Press the TV (
) button again to exit from the teletext display.
45
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:25 PM
Page 46
Selecting Display Options
ENG
When you have displayed a Teletext page, you can select various
options to suit your requirements.
To display...
◆ Hidden text
(answers to quiz games, for example)
(reveal)
◆ The normal screen
(reveal) again
◆ A secondary page
(sub-page)
◆ The broadcast when searching for a page
(cancel)
◆ The next page
(page up)
◆ The previous page
(page down)
◆ Double-size letters in the:
• Upper half of the screen
• Lower half of the screen
(size)
• Once
• Twice
◆ Normal screen
• Three times
➢
46
Press the...
To return to the normal display after using the reveal or
size feature, press the TV (
) button.
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:25 PM
Page 47
Selecting a Teletext Page
ENG
You can enter the page number directly by pressing the numeric
buttons on the remote control.
1
Enter the three-digit page number given in the content by
pressing the corresponding numeric buttons.
Result:
The current page counter is incremented and the
page is then displayed. If the selected page is linked
with several secondary pages, the secondary pages
are displayed in sequence. To freeze the display on a
given page, press the
(hold). Press it again to
resume.
2
If the FASTEXT system is used by the broadcasting company,
the different topics covered on a Teletext page are color-coded
and can be selected by pressing the colored buttons on the
remote control.
Press the colored button corresponding to the topic that you wish
to select; the available topics are given on the status line.
Result:
The page is displayed with other colored information
that can be selected in the same way.
3
To display the previous or next page, press the corresponding
colored button.
4
To display the subpage, see the following steps.
◆ Press the
(sub-page) button.
Result:
The available subpages appear.
◆ Select the required sub-page. Sub-pages can be scrolled by
pressing the
or
button.
5
When you have finished, press the TV (
your normal broadcast.
) button to return to
47
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:25 PM
Page 48
Storing Teletext Pages (depending on the model)
ENG
You can store up to four teletext pages to display them later at
leisure.
1
Select the LIST mode using the
Result:
➢
48
button.
Four 3-digit numbers are displayed in different colors.
The
button is used to switch between the LIST and
FLOF modes.
2
Press the colored button corresponding to the page that will be
replaced.
3
Enter the new page number using the numeric buttons.
4
Repeat steps 2 and 3 for each page to be stored, using a
different colored button each time.
5
Press the
(store) button until the corresponding blocks blink.
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:25 PM
Page 49
Connecting to the External Devices
ENG
Rear of the TV
(Input/Output)
VCR
②
Decoder /
Video game device
③
Video disc player
①
Satellite receiver
➃
① This end can be fitted with:
◆ Three RCA connectors (VIDEO + AUDIO-L and R)
② If you have a second VCR and wish to copy cassettes tape, connect the source VCR to “IN 1” and the
target VCR to “OUT” so that you can redirect the signal from source VCR to target VCR.
③ If you have a decoder, connect the decoder to the VCR and the VCR to the television.
➃ “OUT” is used for displaying the current picture to an external device. When you wish to record the
current picture, connect the VCR to “OUT”.
Side of the TV
(Input)
(depending on the model)
Camcorder
Video disc player
Video game device
☛
Whenever you connect an audio or video system to your
television, ensure that all elements are switched off.
Refer to the documentation supplied with your equipment
for detailed connection instructions and associated safety
precautions.
49
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:25 PM
Page 50
Connecting to the Audio Outputs
ENG
➢
The AUDIO-L and R connectors are used for equipment, such as an audio system or external amplifier
(to take full advantage of the Surround sound effect).
Rear of the TV
Audio System/
External Amplifier
50
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:25 PM
Page 51
Connecting to the S-Video Input
ENG
➢
The S-VIDEO (or S-VIDEO INPUT) and RCA (AUDIO3-L and R) connectors are used for
equipment with an S-Video output, such as a camcorder or VCR.
Side of the TV
(depending on the model)
①
Camcorder
and
VCR
①
and
① To play pictures and sound, both the S-VIDEO (or S-VIDEO INPUT) and RCA connectors must be used.
51
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:25 PM
Page 52
Connecting to the Component Input
ENG
Rear of the TV
①
②
➢
DVD
DTV receiver
The COMPONENT IN connectors are used for equipment with a DVD or DTV receiver output.
(480i, 480p, 576i,576p, 1080i)
52
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:25 PM
Page 53
Programming the Remote Control for Other Components
ENG
Your TV comes equipped with a universal remote control. In
addition to controlling the TV, the universal remote control can
also operate a VCR, Cable box, DVD and Set-Top Box made by
Samsung (even if your VCR, Cable box and DVD are made by
manufacturers other than Samsung).
➢
The remote control might not be compatible with all
VCRs, DVD players and Cable boxes.
1
Turn off your VCR (Cable box or DVD).
2
Press the SELECT button to switch the remote control to the VCR
(CABLE or DVD) mode.
➢
The remote control has five modes : TV, STB, VCR,
CABLE and DVD
3
Press the SET button.
4
Enter 3 digits of the VCR (Cable box or DVD) code listed on next
page for your VCR (Cable box or DVD).
Example: To enter the code “6”, press 0, 0, and 6.
To enter the code “76”, press 0, 7, and 6.
5
Press the POWER ( ) button. Your VCR (Cable box or DVD)
should turn on. If it turns on, your remote control is now set
correctly.
➢
6
If it does not turn on, repeat steps above, but try one of the
other codes listed for the brand of particular yours.
Once your remote control is set up, press the SELECT button any
time you want to use the remote control to operate VCR (Cable
box or DVD).
➢
◆ When your remote control is in the STB, VCR, CABLE
and DVD mode, the volume buttons still control your
television’s volume.
◆ When your remote control is in the TV mode, the VCR or
DVD control buttons (rewind, stop, play/pause and fast
forword) still operate your VCR or DVD.
53
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:25 PM
Page 54
Programming the Remote Control for Other Components
ENG
VCR Remote Control Codes
Cable Box (CATV) Remote Control Codes
DVD Remote Control Codes
54
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:25 PM
Page 55
Troubleshooting: Before Contacting Service Personnel
ENG
Before contacting Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of the
television and contact your local dealer.
No sound or picture
◆ Check that the mains lead has been connected to a wall socket.
◆ Check that you have pressed the “ I ” button (On/Off) and the
POWER ( ) button.
◆ Check the picture contrast and brightness settings.
◆ Check the volume.
Normal picture but no sound
◆ Check the volume.
◆ Check whether the volume MUTE (
control has been pressed.
) button on the remote
No picture or black and white picture
◆ Adjust the color settings.
◆ Check that the broadcast system selected is correct.
Sound and picture interference
◆ Try to identify the electrical appliance that is affecting the television,
then move it further away.
◆ Plug your television into a different mains socket.
Blurred or snowy picture,
distorted sound
◆ Check the direction, location and connections of your aerial.
This interference is often occurs to the use of an indoor aerial.
Remote control malfunctions
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control (transmission window).
◆ Check the battery terminals.
55
BP68-00303A(J60A_Asia_ENG)
5/4/04
5:25 PM
Page 56
- AFTER SALES SERVICE
- Do not hesitate to contact your retailer or service agent
if a change in the performance of your product indicates
that a faulty condition may be present.
ELECTRONICS
BP68-00303A-00
Download PDF

advertising