Samsung | UN55C7000WF | Samsung UN55C7000WF 55형 Full HD 3D LED 사용자 매뉴얼

LED TV user manual
LED TV
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
http://www.samsung.com/sec/
Model______________ Serial No.______________
© 2010 Samsung Electronics Co., Ltd. All rights reserved.
[BOOK-UC7000]Web Manual-Eng.indb 1
2010-03-31 오후 1:40:02
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Product design and specifications may be changed without notice.
Still image warning
Avoid displaying still images (such as jpeg picture files) or still image elements (such as TV channel logos, panorama or 4:3 image format, stock or news
bars at screen bottom etc.) on the screen. Constant displaying of still picture can cause ghosting of LED screen, which will affect image quality. To reduce
risk of this effect, please follow below recommendations:
• Avoid displaying the same TV channel for long periods.
• Always try to display a full screen image.
• Reducing brightness and contrast will help to avoid the appearance of after-images.
• Use all TV features designed to reduce image retention and screen burn, refer to proper user manual section for details.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
✎✎ When using a stand or wall-mount, use parts provided by Samsung Electronics only.
xx If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
The
✎✎ appearance may differ depending on the product.
Installation with a stand.
Installation with a wall-mount.
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
2
English
[BOOK-UC7000]Web Manual-Eng.indb 2
2010-03-31 오후 1:40:02
Contents
Getting Started
Advanced Features
yy
yy
yy
yy
yy
yy
yy Network Connection................................................ 28
List of Features.......................................................... 4
Accessories............................................................... 4
Viewing the Control Panel.......................................... 5
Viewing the Remote Control....................................... 6
Connecting to an Antenna......................................... 7
Plug & Play (Initial Setup)............................................ 7
Connecting to a Wired Network
Connecting to a Wireless Network
Using Data Service
yy Media Play............................................................... 35
Connecting a USB Device
Connecting to your PC through a network
Screen Display
Playing the Multiple Files Media Play Additional Function
Connections
yy
yy
yy
yy
Connecting to an AV Device....................................... 8
Connecting to an Audio Device................................ 10
Connecting to a PC................................................. 11
Changing the Input Source...................................... 12
How to Navigate Menus........................................... 12
Using the INFO button (Now & Next guide).............. 13
Planning Your Viewing.............................................. 13
Channel Menu........................................................ 14
Seeing Channels
Using Favorite Channels
Memorizing Channels
Editing Channels
Other Features
14
14
14
15
15
Setting Up Anynet+ Switching between Anynet+ Devices Recording Listening through a Receiver Troubleshooting for Anynet+
Changing the Preset Picture Mode
Adjusting Picture Settings
Economical Solutions
Changing the Picture Options
Viewing TV using the 3D function
Setting up the TV with Your PC
16
16
16
16
19
21
yy Sound Menu............................................................ 22
Changing the Preset Sound Mode
Adjusting Sound Settings
Sound Settings
22
22
22
45
45
46
46
47
yy Internet@TV............................................................. 48
Getting Started with Internet@TV
Setting up Internet@TV
Using the Internet@TV service
48
49
51
yy AllShare................................................................... 52
About AllShare
Setting Up AllShare
52
52
Other Information
yy
yy
yy
yy
Assembling the Cables............................................ 54
Installing the Wall Mount.......................................... 55
Anti-theft Kensington Lock....................................... 56
Securing the TV to the Wall...................................... 57
yy
yy
yy
yy
Troubleshooting....................................................... 58
License.................................................................... 61
Specifications.......................................................... 61
Index....................................................................... 62
To Avoid the TV from Falling ENGLISH
yy Picture Menu........................................................... 16
35
35
37
42
42
yy Anynet+................................................................... 44
Basic Features
yy
yy
yy
yy
28
30
34
57
yy Setup Menu............................................................. 23
Setting the Time
Using the Sleep Timer
Setting the On / Off Timer
Locking Programs
Other Features
Picture In Picture (PIP)
23
23
24
24
24
26
yy Support Menu.......................................................... 26
Check the Symbol!
e⠙ີ‫ە‬
t
This function can be used by pressing the
간편메뉴 button on the remote control.
Note
Step by Step Guide
Indicates additional information.
Check here for instructions on how to open
the relevant submenu within the OSD (on
screen display).
English
[BOOK-UC7000]Web Manual-Eng.indb 3
3
2010-03-31 오후 1:40:03
Getting Started
List of Features
yy Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed
without a cable box / STB (Set-Top-Box) satellite receiver.
yy Media Play: Allows you to play music files, pictures, and movies saved on a USB device (p. 37).
yy Internet@TV: You can use various internet services and view useful information and entertaining content (p. 48).
yy AllShare: AllShare connects your TV and compatible Samsung mobile phones/devices through a network (p. 55).
yy Self Diagnosis: You can check whether picture or sound operate normally (p. 28).
Accessories
✎✎Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.
✎✎The items' colors and shapes may vary depending on the models.
[[CAUTION: INSERT SECURELY LEST SHOULD BE DETACHED IN SET
yy Remote Control (BN68-01055A) & Batteries (AAA x 2)
yy Owner’s Instructions
yy Cleaning Cloth
yy Warranty Card / Safety Guide
(M4 X L8)
4
Blanking Bracket & Screw (1EA)
Program CD
Cable Tie
Holder-Wire (3EA)
Holder-Wire stand
Holder-Ring (4EA)
Antenna Adapter
AV Adapter
Component Sound in Adapter
LAN Adapter
Component Adapter
PC Adapter
Optical Adapter
Ferrite Core (1EA)
English
[BOOK-UC7000]Web Manual-Eng.indb 4
2010-03-31 오후 1:40:04
HDMI
HDMI-DVI
Component
Composite (AV)
Coaxial (RF)
01 Getting Started
Input Cables (Sold Separately)
VGA
✎ Ferrite Core: The ferrite cores are used to shield the cables from interference. When
connecting a cable, open the ferrite core and clip it around the cable near the plug as
shown in the figure.
AV Adapter
✎ For best cable connection to this product, be sure to use cables with a maximum thickness as below:
y Maximum thickness - 0.55 inches (14mm)
Viewing the Control Panel
✎ The product color and shape may vary depending on the model.
✎ External electrical noise or contact with objects other than your finger may switch on the LED touchpad.
Remote control sensor / Power Indicator
Speakers
Remote control sensor
Power Indicator
TV/외부입력E
메뉴m
- 음량 +
> 채널 <
P (Power)
Aim the remote control towards this spot on the TV.
Blinks and turns off when the power is on and lights up in standby mode.
Toggles between all the available input sources. In the on-screen menu, use this
button as you would use the ENTERE button on the remote control.
Displays an on-screen menu, the OSD (on screen display) of your TV’s features.
Adjusts the volume. In the OSD, use the - 음량 + buttons as you would use the ◄
and ► buttons on the remote control.
Changes the channels. In the OSD, use the > 채널 < buttons as you would use
the ▼ and ▲ buttons on the remote control.
Turns the TV on or off.
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount
of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
English
[BOOK-UC7000]Web Manual-Eng.indb 5
5
2010-03-31 오후 1:40:05
Getting Started
Viewing the Remote Control
Turns the remote control light on or
off. When on, the buttons become
illuminated for a moment when pressed.
(Using the remote control with this button
set to ON will reduce the battery usage
time.)
Turns the TV on and off.
Displays and selects the available video
sources (p. 13).
Press to directly access channels.
Press to select additional channels
(digital) being broadcasted by the same
station. For example, to select channel
“54-3”, press “54”, then press “–” and
“3”.
Returns to the previous channel.
Cuts off the sound temporarily.
Adjusts the volume.
Changes channels.
채널관리
Displays the channel list on the screen
(p. 14).
Brings up the OSD.
Displays the Content View, which
includes Channel List, Internet@TV,
Media Play, AllShare and 3D.
Quickly select frequently used functions.
Returns to the previous menu.
Buttons used in the Channel List,
Internet@TV, Media Play menu, etc.
Use these buttons in Media Play and
Anynet+ modes (p. 37, 44).
(�: Controls recording for Samsung
recorders that have the Anynet+ feature)
메뉴
ᯙ░֘
Link to various internet services (p. 48).
e⠙ີ‫ە‬
ᱶᅕ⢽᜽
Displays information on the TV screen.
ᅖȡ
᳦ഭ
⎹▱⊁
A
B
C
ມ❑ၙॵᨕ
ႊᘂᦩԕ
ᖁ⪙₥ձ
⪵໕Ⓧʑ
‫⪵ך‬
Selects the on-screen menu items and
changes the values seen on the menu.
Exits the menu.
D
3D
멀티미디어: Displays Media Play (p. 37).
방송안내: Displays the EPG (Electronic
Program Guide)
3D: Sets the 3D mode. (p. 20).
선호채널: Displays Favorite Channel Lists
on the screen (p. 14).
화면크기: Selects the picture size (p. 18).
button: Use it when you use Data
broadcasting services.
Installing batteries (Battery size: AAA)
✎✎NOTE
xx Use the remote control within 23 feet from the TV.
xx Bright light may affect the performance of the remote
control. Avoid use when nearby fluorescent lights or neon
signs.
xx The color and shape may vary depending on the model.
6
English
[UC7000]Web Manual-Eng.indd 6
2010-03-31 오후 1:46:55
01 Getting Started
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎✎Connecting the power cord and antenna.
VHF/UHF Antenna
Antenna Cable (Not Supplied)
Cable
or
ANT OUT
Antenna Adapter (Supplied)
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the 전원
P button. Plug & Play is available only when the Input source is set to TV.
✎✎To return to the previous step, press the Red button.
1
2
Selecting a language
3
Selecting a channel
4
5
6
Setting the Clock
Mode
Selecting Store Demo
or Home Use
Press the ▲ or ▼ button, then press the ENTERE button.
ᱥᬱ
Select the desired OSD (On Screen Display) language.
Press the ◄ or ► button, then press the ENTERE button.
yy Select the Home Use mode. Store Demo Mode is for retail
environments.
yy To return the unit’s settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you
see the volume OSD, press and hold 메뉴 for 5 sec.
Press the l or ▶ button, then press the ENTERE button.For more information, for more
information, refer to Channel → Auto Program (p. 14).
P
㥉⸨䖐㐐
✎✎
View the HD
Connection Guide
Enjoy the TV.
Press the ENTERE button at any time to interrupt the memorization process.
Set the Clock Mode automatically or manually.
yy Manual: Allows you to manually set the current date and time (p. 24).
The connection method for the best HD screen quality is displayed.
Press the ENTERE button.
If You Want to Reset This Feature...
OO 메뉴m → Setup → Plug & Play → ENTERE
English
[BOOK-UC7000]Web Manual-Eng.indb 7
7
2010-03-31 오후 1:40:07
Connections
Connecting to an AV Device
Using an HDMI or HDMI/DVI Cable: HD connection (up to 1080p)
We recommend using the HDMI connection for the best quality HD picture.
Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver
Device
HDMI Cable (Not Supplied)
HDMI OUT
Device
HDMI to DVI Cable (Not Supplied)
DVI OUT
Audio Cable (Not Supplied)
AUDIO OUT
R
W
Red
White
R-AUDIO-L
✎✎HDMI 입력 1(DVI), 2(ARC), 3, 4, PC/DVI 음성입력
xx When using an HDMI/DVI cable connection, you must use the HDMI 입력 1(DVI) jack for video. A DVD, Blu-ray
player, HD cable box, or HD STB satellite receiver may require a DVI-HDMI (DVI to HDMI) cable or DVI-HDMI
(DVI to HDMI) adapter. The PC/DVI 음성입력 jack is required for audio.
xx If an external device such as a DVD / Blu-ray player / HD cable box / HD STB satellite receiver supporting
HDMI version older than 1.4 is connected, the TV may operate abnormally (e.g. no screen display / no sound /
annoying flicker / abnormal color).
xx If there is no sound after connecting an HDMI cable, check the HDMI version of the external device. If you
suspect the version is older than 1.4, contact the provider of the device to confirm the HDMI version and
request an upgrade.
xx Samsung TVs support HDMI 1.4 (with 3D and Audio Return Channel). However, the ARC(Audio Return
Channel) function is only supported on HDMI 입력 2(ARC).
–– If 3D Auto View is On, some functions, such as Internet@TV, are disabled. To use these functions, set 3D
Auto View or 3D Mode to Off.
xx The ARC function enables digital output of sound using the HDMI 입력 2(ARC) port and can only be operated
when the TV is connected to an audio receiver that supports ARC.
–– The ARC mode is only enabled when the TV is connected to a device with an HDMI Standard cable, HDMI
High Speed cable, Hdmi Standard with Ethernet cable or HDMI High Speed with Ethernet cable.
–– When the Input Source is the TV, the ARC function allows audio to be heard from a receiver. The audio is sent
to a receiver from the TV via an HDMI cable without the need for a separate optical cable.
xx It is recommended you purchase an HDMI-certified cable. Otherwise, the screen may appear blank or a
connection error may occur.
8
English
[BOOK-UC7000]Web Manual-Eng.indb 8
2010-03-31 오후 1:40:07
02 Connections
Using a Component (up to 1080p) or Audio/Video (480i only) Cable
Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR
R
Red
W
R
B
G
R
W
Y
White
Red
Blue
Green
Red
White
Yellow
Device
AUDIO OUT
R-AUDIO-L
R
W
Device
COMPONENT OUT
PR
PB
Y
R
B
G
AUDIO OUT
VIDEO OUT
R-AUDIO-L
R
W
Y
W
R
Component Sound in
Adapter (Supplied)
Audio Cable
(Not Supplied)
Component Cable
(Not Supplied)
Audio Cable
(Not Supplied)
Video Cable
(Not Supplied)
R
Y
W
Component Adapter (Supplied)
G
B
R
AV Adapter (Supplied)
✎✎For better picture quality, the Component connection is recommended over the A/V connection.
Using an EX-Link Cable Connection
Available Devices: External devices that support EX-Link.
EX-LINK: Connector for service only.
English
[BOOK-UC7000]Web Manual-Eng.indb 9
9
2010-03-31 오후 1:40:08
Connections
Connecting to an Audio Device
Using an Optical (Digital) or Audio (Analog) Cable Connection
Available devices: Digital Audio System, Amplifier, DVD home theater
R
W
Red
White
Audio Cable (Not Supplied)
AUDIO IN
Amplifier /
DVD home theater
R-AUDIO-L
Digital Audio System
Optical Cable (Not Supplied)
OPTICAL
Optical Adapter (Supplied)
✎✎디지털 음성출력 (옵티컬)
xx When a Digital Audio System is connected to the 디지털 음성출력 (옵티컬) jack, decrease the volume of both
the TV and the system.
xx 5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
xx When the receiver (home theater) is set to on, you can hear sound output from the TV’s optical jack. When the
TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source is
a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is
connected to the TV via HDMI, only 2 CH audio will be heard from the home theater receiver. If you want to
hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite
receiver directly to an amplifier or home theater.
✎✎음성출력: Connects to the audio input jacks on your amplifier/DVD home theater.
xx When connecting, use the appropriate connector.
xx When an audio amplifier is connected to the 음성출력 jacks: Decrease the volume of the TV and adjust the
volume level with the amplifier’s volume control.
10
English
[BOOK-UC7000]Web Manual-Eng.indb 10
2010-03-31 오후 1:40:08
02 Connections
Connecting to a PC
Using an HDMI/DVI cable or a D-sub cable
HDMI to DVI Cable (Not Supplied)
DVI OUT
AUDIO OUT
Audio Cable (Not Supplied)
AUDIO OUT
D-Sub Cable (Not Supplied)
PC OUT
PC Adapter (Supplied)
Display Modes (D-Sub and HDMI/DVI Input)
Optimal resolution is 1920 X 1080 @ 60 Hz.
Mode
Resolution
Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
Pixel Clock Frequency
(MHz)
Sync Polarity
(H / V)
IBM
640 x 350
720 x 400
31.469
31.469
70.086
70.087
25.175
28.322
+/-/+
MAC
640 x 480
832 x 624
1152 x 870
35.000
49.726
68.681
66.667
74.551
75.062
30.240
57.284
100.000
-/-/-/-
VESA CVT
720 x 576
1152 x 864
1280 x 720
1280 x 960
35.910
53.783
56.456
75.231
59.950
59.959
74.777
74.857
32.750
81.750
95.750
130.000
-/+
-/+
-/+
-/+
VESA DMT
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1280 x 720
1280 x 800
1280 x 800
1280 x 960
1360 x 768
1440 x 900
1440 x 900
1680 x 1050
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
67.500
63.981
79.976
45.000
49.702
62.795
60.000
47.712
55.935
70.635
65.290
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.020
75.025
60.000
59.810
74.934
60.000
60.015
59.887
74.984
59.954
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
108.000
135.000
74.250
83.500
106.500
108.000
85.500
106.500
136.750
146.250
-/-/-/+/+
+/+
+/+
-/-/+/+
+/+
+/+
+/+
+/+
-/+
-/+
+/+
+/+
-/+
-/+
-/+
VESA GTF
1280 x 720
1280 x 1024
52.500
74.620
70.000
70.000
89.040
128.943
-/+
-/-
VESA DMT / DTV CEA
1920 x 1080p
67.500
60.000
148.500
+/+
✎✎NOTE
xx For HDMI/DVI cable connection, you must use the HDMI 입력 1(DVI) jack.
xx The interlace mode is not supported.
xx The set may operate abnormally if a non-standard video format is selected.
xx Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
English
[BOOK-UC7000]Web Manual-Eng.indb 11
11
2010-03-31 오후 1:40:09
Connections
Changing the Input Source
Edit Name
OO 메뉴m → Input → Edit Name → ENTERE
Source List
Use to select TV or an external input sources
such as a DVD / Blu-ray player / cable box /
STB satellite receiver.
57᫙ᇡ᯦ಆ
■■ VCR / DVD / Cable STB / Satellite STB / PVR STB /
AV Receiver / Game / Camcorder / PC / DVI PC / DVI
Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name
the device connected to the input jacks to make your
input source selection easier.
✎✎When a PC with a resolution of 1920 x 1080 @ 60Hz is
OO 메뉴m → Input → Source List → ENTERE
connected to the HDMI 입력 1(DVI) port, you should set
the TV to DVI PC mode under Edit Name.
✎✎When connecting an HDMI/DVI cable to the HDMI 입력
1(DVI) port, you should set the TV to DVI PC or DVI
Devices mode under Edit Name.
■■ TV / PC / AV / Component / HDMI1/DVI / HDMI2 /
HDMI3 / HDMI4 / USB
✎✎ You can only choose external devices that
are connected to the TV. In the Source List,
connected inputs will be highlighted.
✎✎ In the Source List, PC is always activated.
Basic Features
How to Navigate Menus
How to Operate the OSD (On Screen Display)
Before using the TV, follow the steps below to learn how to
navigate the menu and select채널관리
and adjust different functions.
1
메뉴
⎹▱⊁
ᱶᅕ⢽᜽
2
ᅖȡ
A
᳦ഭ
B
1
메뉴m
2
3
4
5
▲/▼
6
7
ENTER E
ᯙ░֘
e⠙ີ‫ە‬
3
The access step may differ depending on the selected menu.
C
4
D
1 메뉴 button: Displays the main on-screen menu.
ມ❑ၙॵᨕ
ႊᘂᦩԕ
ᖁ⪙₥ձ
⪵໕Ⓧʑ
ENTERE
▲/▼
◄/►
3D
2 ENTERE / Direction button: Move the cursor and
select an item. Confirm the setting.
3 복귀 button: Returns to the previous menu.
4 종료 button: Exits the on-screen menu.
종료 e
The main menu options appear on
the screen:
Picture, Sound, Channel, Setup,
Input, Application, Support.
Select an icon with the ▲ or ▼
button.
Press ENTERE to access the
sub-menu.
Select the desired submenu with
the ▲ or ▼ button.
Adjust the value of an item with the
◄ or ► button. The adjustment in
the OSD may differ depending on
the selected menu.
Press ENTERE to confirm the
selection.
Press 종료.
‫⪵ך‬
12
English
[BOOK-UC7000]Web Manual-Eng.indb 12
2010-03-31 오후 1:40:10
The display identifies the current channel and
the status of certain audio-video settings.
The Now & Next guide shows daily TV
program information for each channel
according to the broadcasting time.
yy Scroll ◄, ► to view information for a
desired program while watching the
current channel.
6%6+'
Dolby Digital
DTV Cable
6-1
Using Scheduled View
Guide
ᱶᅕ⢽᜽
Mon, Jan 1 12:30 pm
DTV 일반 6-1 SBS HD
일요일이 좋다
2:00 pm-3:30 pm
해피 선데이
9-1 KBS1 HD
Scheduled View
오늘
7-1
KBS2 HD
7-1
KBS2 HD
7:00 pm~ 8:00 pm
8:00 pm~ 9:00 pm
세계는 지금
HD 클래식 오디세이
03 Basic Features
Using the INFO button (Now & Next guide)
일요일이 좋다2(12)
도전 골든벨
Mon, 29 Sep 10:15 pm
SBS ⎨㏘ (HD)
10:06 pm - 12:10 am
1080i HD | Korean
View Mode
E Watch
Information
No detailed information.
4
Information
E Watch
5
7
1 Red (View Mode): View the list of programs that are
playing now or coming up.
Planning Your Viewing
Guide
The EPG (Electronic Program Guide)
information is provided by broadcasters.
Using program schedules provided by
broadcasters, you can specify programs you
want to watch in advance so that the channel
automatically changes to the selected
program channel at the specified time.
Program entries may appear blank or out of
date depending on a channel status.
1
Exit
ႊᘂᦩԕ
2
B Green (-2 Hours): Viewing the list of programs to be
broadcasted before 2 hours.
3
Yellow (+2 Hours): Viewing the list of programs to be
broadcasted after 2 hours.
4
Blue (Exit): Exits the guide.
5 Information: Displays details of the selected
program.
6 ENTERE button
–– When selecting the current program, you can watch
the selected program.
–– When selecting the future program, you can reserve to
watch the selected program. To cancel he schedule,
press the ENTERE button again and select Cancel
Schedules.
Using Channel View
Guide
Mon, Jan 1 12:30 pm
DTV 일반 6-1 SBS HD
일요일이 좋다
2:00 pm-3:30 pm
해피 선데이
9-1 KBS1 HD
Channel View
Today
6:00 pm - 7:00 pm
6-1
SBS HD
7-1
KBS2 HD
9-1
KBS1 HD
HD 열린 음악회
10-1
EBS DTV
아시아 테마기향
11-1
MBC DTV
일요일 일요일 밤에
View Mode
1
7:00 pm - 8:00 pm
일요일이 좋다(12)
해피 선데이
B
일요일이 좋다2(12)
도전 골든벨
-2 Hours
+2 Hours
2
3
HD..
Exit
4
Information E Watch
5
6
English
[BOOK-UC7000]Web Manual-Eng.indb 13
13
2010-03-31 오후 1:40:12
Basic Features
Channel Menu
¦¦ Using Favorite Channels
OO 메뉴m → Channel → Channel List → ENTERE
¦¦ Seeing Channels
Add to Favorite / Delete from Favorite
Channel List
Add, delete or set Favorite channels and use
the program guide for digital broadcasts.
t
₥ձšญ
OO 메뉴m → Channel → Channel List →
ENTERE
Added Channels
9-1 ♥KBS1 HD
10-1 ♥EBS DTV
HD KBS 뉴스
DTV 다큐 - 여자
11-1 MBC DTV
[HD] MBC 스포츠 뉴스
4
5
6
7
8
9
10
Air
일반
일반
일반
일반
일반
일반
일반
Antenna
B
2. Add or delete a channel using the Add to Favorite or
Delete from Favorite menu respectively.
9-1 ♥
10-1 ♥
Added Channels
Select a channel in the All Channels, Added
Channels, Favorite or Programmed screen
by pressing the ▲ / ▼ and ENTERE buttons.
Then you can watch the selected channel.
Set channels you watch frequently as Favorites.
1. Select a channel and press the 간편메뉴 button.
Air
KBS1 HD
EBS DTV
11-1
MBC DTV
4
5
6
7
8
9
10
일반
일반
일반
일반
일반
일반
일반
Antenna
B
Delete
Add to Favorite
Lock
Timer Viewing
Timer Recording
Select All
Zoom
Select kPage T Tools
To show all Favorite channels, click on the
button shown on the right.
Zoom
ᖁ⪙₥ձ
Select kPage T Tools
All Channels: Shows all currently available channels.
■■
■■
Added Channels: Shows all added channels.
■■
* Favorite: Shows all favorite channels.
■■
Programmed: Shows all currently reserved
programs.
✎✎Using the color buttons with the Channel List
xx Red (Antenna): Switches to Air or Cable.
xx B Green (Zoom): Enlarges or shrinks a channel
number.
xx
Yellow (Select): Selects multiple channel lists.
Select desired channels and press the Yellow button
to set all the selected channels at the same time. The
c mark appears to the left of the selected channels.
xx k (Page): Move to next or previous page.
xx T (Tools): Displays the Channel List option menu.
(The options menus may differ depending on the
situation.)
¦¦ Memorizing Channels
OO 메뉴m → Channel → ENTERE
Antenna (Air / Cable) t
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV (i.e. an Air or a Cable system).
Auto Program
The TV will begin memorizing all of the available channels.
✎✎NOTE
xx After all the available channels are stored, it starts
to remove scrambled channels. The Auto Program
menu then reappears.
Channel Status Display Icons
Icons
c
*
)
14
Operations
A channel selected.
A channel set as a Favorite.
A reserved Program.
English
[BOOK-UC7000]Web Manual-Eng.indb 14
2010-03-31 오후 1:40:13
OO 메뉴m → Channel → Channel List → ENTERE
Channel Name Edit
1. Select a channel and press the 간편메뉴 button.
2. Edit the channel name using the Channel Name Edit
menu.
3. Scroll up or down to adjust the settings in the box,
or use the numeric buttons on your remote to enter
the date and time.
✎✎ If you selected Once, Every Week or EveryDay
in Repeat you can enter the date you want.
4. Select OK, then press the ENTERE button when
done.
✎✎ NOTE
■■ Channel Name Edit (analog channels only): Assign your
own channel name.
xx Only memorized channels can be reserved.
xx Reserved programs will be displayed in the
¦¦ Other Features
xx When a digital channel is selected, press the ►
OO 메뉴m → Channel → ENTERE
Channel List
Channel List Option Menu
Set each channel using the Channel List menu options (Add
/ Delete, Timer Viewing, Select All / Deselect All). Option
menu items may differ depending on the channel status.
1. Select a channel and press the 간편메뉴 button.
2. Select a function and change its settings.
■■ Add / Delete: Delete or add a channel to display the
channels you want.
✎✎ NOTE
xx All deleted channels will be shown on the All
Channels menu.
xx A gray-colored channel indicates the channel
has been deleted.
xx The Add menu only appears for deleted
channels.
xx Delete a channel from the Added Channels or
Favorite menu in the same manner.
■■ Lock / Unlock: Lock a channel so that the channe
cannot be selected and viewed.
✎✎ This function is available only when the Child Lock
is set to On.
✎✎ The PIN input screen appears. Enter your 4-digit
PIN, the default of which is “0-0-0-0”. Change the
PIN using the Change PIN option.
■■ Timer Viewing: You can set a desired channel to be
displayed automatically at the reserved time. Set the
current time first to use this function.
1. Press the ◄ / ► / ▲ / ▼ buttons to select the
desired channel in Channel List.
03 Basic Features
¦¦ Editing Channels
Programmed menu.
button to view the digital program.
■■ Timer Recording (digital channels only): Allows you
to record a Program currently being broadcasted or
make a reservation to record a Program scheduled for
broadcast.
✎✎ A USB device with 4GB of memory or greater
must be connected to the TV.
✎✎ A USB storage device cannot record until it
completes the Device Performance Test.
■■ Select All: Select all the channels in the channel list.
■■ Deselect All: Deselect all the selected channels.
✎✎ You can only select Deselect All when one or
more channels are selected.
Programmed
(in Channel List)
You can view, modify or delete a show you have reserved
to watch. Programmed timer viewing is displayed here.
Highlight a program and press the 간편메뉴 button to
display Options.
■■ Change Info: Change a show you have reserved to
watch. Begin with step 3 of “Timer Viewing” above.
■■ Cancel Schedules: Cancel a show you have reserved
to watch.
✎✎ This deletes the highlighted or selected
program(s).
■■ Information: Display a show you have reserved
to watch. (You can also change the reservation
Information.)
✎✎ Alternatively, you can view Information by
highlighting a program and pressing the
ENTERE button.
■■ Select All / Deselect All: Select or deselect all reserved
programs.
2. Press the 간편메뉴 button, then select Timer
Viewing.
English
[BOOK-UC7000]Web Manual-Eng.indb 15
15
2010-03-31 오후 1:40:14
Basic Features
Fine Tune
¦¦ Economical Solutions
(analog channels only)
If the reception is clear, you do not have to fine tune the
channel, as this is done automatically during the search and
store operation. If the signal is weak or distorted, fine tune
the channel manually. Scroll to the left or right until the image
is clear.
The Eco Function can be used to enhance your power
savings.
✎✎Settings are applied to the channel you're currently
watching.
✎✎Fine tuned channels that have been saved are marked
with an asterisk “*” on the right-hand side of the
channel number in the channel banner.
✎✎To reset the fine-tuning, select Reset.
Picture Menu
¦¦ Changing the Preset Picture Mode
OO 메뉴m → Picture → Mode → ENTERE
Mode t
Select your preferred picture type.
■■ Dynamic: Suitable for a bright room.
■■ Standard: Suitable for a normal environment.
■■ Natural: Suitable for reducing eye strain.
✎✎ Natural is not available in PC mode.
Eco Solution
OO 메뉴m → Picture → Eco Solution → ENTERE
■■ Energy Saving (Off / Low / Medium / High / Picture
Off / Auto): This adjusts the brightness of the TV in order
to reduce power consumption. If you select Picture Off,
the screen is turned off, but the sound remains on. Press
any button except volume button to turn on the screen.
■■ Eco Sensor (Off / On): To enhance your power savings;
the picture settings will automatically adapt to the light
in the room.
✎✎ If you adjust the Backlight, the Eco Sensor will
be set to Off.
Min Backlight: When Eco sensor is On, the minimum
screen brightness can be adjusted manually.
If Eco Sensor is On, the display brightness may
change (become slightly darker in most cases)
depending on the surrounding light intensity.
✎✎
■■ No Signal Power Off (Off / 15 min. / 30 min. / 60
min.): To avoid unnecessary energy consumption,
set how long you want the TV to remain on if it's not
receiving a signal.
✎✎ Disabled when the PC is in power saving mode.
■■ Movie: Suitable for watching movies in a dark room.
¦¦ Changing the Picture Options
¦¦ Adjusting Picture Settings
Advanced Settings
OO 메뉴m → Picture → ENTERE
OO 메뉴m → Picture → Advanced Settings →
Backlight / Contrast / Brightness /
Sharpness / Color / Tint (G/R)
(Advanced Settings are available in Standard / Movie mode)
Compared to previous models, new Samsung TVs have a
more precise picture.
Your television has several setting options for picture quality
control.
✎✎NOTE
xx When you make changes to Backlight, Contrast,
Brightness, Sharpness, Color or Tint (G/R) the
OSD will be adjusted accordingly.
xx In PC mode, you can only make changes to
Backlight, Contrast and Brightness.
xx Settings can be adjusted and stored for each
external device connected to the TV.
ENTERE
✎✎In PC mode, you can only make changes to Dynamic
Contrast, Gamma, White Balance and LED Motion
plus.
Advanced Settings
Black Tone : Off ►
Dynamic Contrast
: Medium
Shadow Detail
: -2
Gamma
:0
Expert Pattern
: Off
RGB Only Mode
: Off
Color Space
: Native
▼
U Move E Enter R Return
16
English
[BOOK-UC7000]Web Manual-Eng.indb 16
2010-03-31 오후 1:40:14
■■ Dynamic Contrast (Off / Low / Medium / High): Adjust
the screen contrast.
■■ Shadow Detail (-2~+2): Increase the brightness of dark
images.
■■ Gamma: Adjust the primary color intensity.
■■ Expert Pattern (Off / Pattern1 / Pattern2): By
running the Expert Pattern function, the picture can
be calibrated. If the OSD menu disappears or a menu
other than the Picture menu is opened, the calibration is
saved and the Expert Pattern window disappears.
Off: Turns the Expert Pattern function off.
Pattern1: This is a test screen designed to demonstrate
the affects of display settings on shades.
Pattern2: This is a test screen designed to demonstrate
the affects of display settings on colors.
After selecting Pattern1 or Pattern2, you can
adjust any of the advanced settings to the desired
effect.
✎✎
✎✎ While the Expert Pattern is running, sound is not
■■ Flesh Tone: Emphasize pink “Flesh Tone.”
■■ Edge Enhancement (Off / On): Emphasize object
boundaries.
■■ xvYCC (Off / On): Setting the xvYCC mode on
increases detail and color space when watching movies
from an external device (e.g. BD/DVD player) connected
to the HDMI or Component IN jacks.
✎✎ Available when the picture mode is set to Movie
and when the external input is set to HDMI or
Component.
✎✎ Some external devices may not support this
function.
■■ LED Motion Plus (Off / On): Removes drag from fast
scenes with a lot of movement to provide a clear picture.
Picture Options
OO 메뉴m → Picture → Picture Options → ENTERE
✎✎In PC mode, you can only make changes to the Color
Tone, Size and Auto Protection Time.
output.
✎✎ Only enabled in DTV, Component and HDMI
modes.
■■ RGB Only Mode (Off / Red / Green / Blue): Displays
the Red, Green and Blue color for making fine
adjustments to the hue and saturation.
■■ Color Space (Auto / Native / Custom): Adjust the
range of colors available to create the image. To adjust
Color, Red, Green, Blue and Reset, set Color Space
to Custom.
■■ White Balance: Adjust the color temperature for a more
natural picture.
R-Offset / G-Offset / B-Offset: Adjust each color's
(red, green, blue) darkness.
R-Gain / G-Gain / B-Gain: Adjust each color's (red,
green, blue) brightness.
Reset: Resets the White Balance to it's default
settings.
03 Basic Features
■■ Black Tone (Off / Dark / Darker / Darkest): Select the
black level to adjust the screen depth.
Picture Options
Color Tone
: Normal ►
Size
: 16:9
Digital Noise Filter
: Auto
MPEG Noise Filter
: Auto
HDMI Black Level
: Normal
Film Mode
: Off
Auto Motion Plus : Standard
▼
U Move E Enter R Return
■■ Color Tone (Cool / Normal / Warm1 / Warm2)
✎✎Warm1 or Warm2 will be deactivated when the picture
mode is Dynamic.
✎✎Settings can be adjusted and stored for each external
device connected to an input on the TV.
■■ 10p White Balance (Off / On): Controls the white
balance in 10 point intervals by adjusting the red, green,
and blue brightness.
✎✎ Available when the picture mode is set to Movie
and when the external input is set to HDMI or
Component.
✎✎ Some external devices may not support this
function.
Interval: Select interval to adjust.
Red: Adjust the red level.
Green: Adjust the green level.
Blue: Adjust the blue level.
Reset: Resets the 10p White Balance to its default
settings.
English
[BOOK-UC7000]Web Manual-Eng.indb 17
17
2010-03-31 오후 1:40:15
Basic Features
■■ Size: Your cable box/satellite receiver may
have its own set of screen sizes as well.
However, we highly recommend you use
16:9 mode most of the time.
⪵໕Ⓧʑ
16:9 : Sets the picture to 16:9 wide
mode.
Zoom1: Use for moderate magnification.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture to fit
the entire screen.
Available with HD 1080i / 720p signals in 16:9
mode.
✎✎
4:3 : Sets the picture to basic (4:3) mode.
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and center
of the screen may cause image retention(screen
burn) which are not covered by the warranty.
✎✎
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are inputted.
✎✎NOTE
xx When Double (À, Œ) mode has been set in PIP
(Picture-in-Picture), the Picture Size cannot be set.
xx After selecting Zoom1, Zoom2 or Wide Fit:
xx Settings can be adjusted and stored for each
external device you have connected to an input on
the TV.
Input Source
ATV, AV,
Component (480i, 480p)
DTV(1080i),
Component (1080i, 1080p),
HDMI (720p, 1080i, 1080p)
PC
Picture Size
16:9, Zoom1,
Zoom2, 4:3
16:9, 4:3, Wide Fit,
Screen Fit
16:9, 4:3
■■ Digital Noise Filter (Off / Low / Medium / High / Auto
/ Auto Visualisation): If the broadcast signal received
by your TV is weak, you can activate the Digital Noise
Filter feature to reduce any static and ghosting that may
appear on the screen.
✎✎ When the signal is weak, try other options until the
best picture is displayed.
Auto Visualisation: When changing analog channels,
displays signal strength.
Only available for analog channels.
✎✎
✎✎ When bar is green, you are receiving the best
possible signal.
2. Press the ENTERE button.
■■ MPEG Noise Filter (Off / Low / Medium / High /
Auto): Reduces MPEG noise to provide improved
picture quality.
3. Press the ▲ or ▼ button to move the picture up
or down.
■■ HDMI Black Level (Normal / Low): Selects the black
level on the screen to adjust the screen depth.
1. Press the ► button to select Position.
4. Press the ENTERE button.
5. Press the ► button to select Reset.
6. Press the ENTERE button to reset the picture
to its default position.
xx After selecting Screen Fit in HDMI (1080i/1080p) or
Component (1080i/1080p) mode, you may need to
center the picture:
1. Press the ◄ or ► button to select Position.
2. Press the ENTERE button.
3. Press the ▲, ▼, ◄ or ► button to move the
picture.
4. Press the ENTERE button.
5. Press the ◄ or ► button to select Reset.
6. Press the ENTERE button.
xx HD (High Definition): 16:9 - 1080i/1080p (1920x1080),
720p (1280x720)
✎✎ Available only in HDMI mode.
■■ Film Mode (Off / Auto1 / Auto2): Sets the TV to
automatically sense and process film signals from all
sources and adjusts the picture for optimum quality.
✎✎ Available in TV, AV, COMPONENT (480i / 1080i)
and HDMI (480i / 1080i).
■■ Auto Motion Plus (Off / Clear / Standard / Smooth /
Custom / Demo): Removes drag from fast scenes with
a lot of movement to provide a clearer picture.
✎✎ If noise occurs on the screen, please set the
Auto Motion Plus to Off. If Auto Motion Plus
is Custom, you can set up the Blur Reduction,
Judder Reduction or Reset manually.
✎✎ If Auto Motion Plus is Demo, you can compare
the difference between on and off modes.
Blur Reduction: Adjusts the blur reduction level from
video sources.
Judder Reduction: Adjusts the judder reduction level
from video sources when playing films.
Reset: Reset the custom settings.
■■ Auto Protection Time (2 hours / 4 hours / 8 hours
/ 10 hours / Off): Set the time the screen remains idle
with a still image until the screen saver is activated. The
screen saver prevents the formation of ghost images on
the screen.
18
English
[BOOK-UC7000]Web Manual-Eng.indb 18
2010-03-31 오후 1:40:15
elderly, epileptic and those suffering from serious
physical conditions are advised to avoid utilizing the
unit’s 3D functionality.
Demo: Displays the difference between Smart LED on
and off modes.
xx We don't recommend watching 3D if you are in bad
physical condition, need sleep or have been drinking
liquor.
¦¦ Viewing TV using the 3D function
OO 메뉴m → Picture → 3D → ENTERE
xx Please take care to be aware of the world around
you. This product is designed to be immersive. DO
NOT use this product near open stairwells, cables,
balconies, or other objects that can be tripped over,
run into, knocked down, broken or fallen over. Being
startled or deluding yourself into thinking that the 3D
images are real may cause you to crush a nearby
object or get injured trying to move your body.
IMPORTANT SAFETY INFORMATION. READ THE
FOLLOWING WARNINGS BEFORE YOU OR YOUR
CHILD USE THE 3D FUNCTION
[[WARNING
xx As the TV turns on, the left and right sides of 3D
pictures may overlap more than usual. It may take
time until the picture quality is optimized.
xx Do not use the 3D Active Glasses for any other
purpose than for which it was designed. Wearing the
3D Active Glasses for any other purpose (as general
spectacles, sunglasses, protective goggles, etc.)
may physically harm you or weaken your eyesight.
xx The 3D effect may be experienced differently
depending on the viewer. You may not notice the 3D
effect at all if you have a prescription for one eye that
is very different from the other eye.
xx Immersive video can potentially have adverse effects
xx Parents’ careful supervision is required particularly
on the user including motion sickness, perceptual
after effects, disorientation, eye strain, and
decreased postural stability. Take frequent breaks to
lessen the potential of these effects, as is commonly
suggested for other items, such as keyboards and
computer monitors, that you may tend to fixate or
concentrate on. If your eyes show signs of fatigue or
dryness or if you have any of the above symptoms,
immediately discontinue use of this device and do
not resume using it for at least thirty minutes after
the symptoms have subsided.
when children or teenagers view 3D images.
xx Photosensitive Seizure Warning and Other Health
Risks
–– Some viewers may experience an epileptic seizure
or stroke when exposed to certain flashing images
or lights contained in certain television pictures or
video games. If you or any of your relatives has a
history of epilepsy or strokes, please consult with a
medical specialist before using the 3D function.
–– Do not watch 3D pictures when you feel
incoherent, sleepy, tired or sick. Avoid watching 3D
pictures for long hours.
–– Even those without a personal or family history
of epilepsy or stroke may have an undiagnosed
condition that can cause “photosensitive epileptic
seizures.”
–– If you experience any of the following symptoms
immediately stop watching 3D pictures and
consult a medical specialist: (1) altered vision; (2)
lightheadedness; (3) dizziness; (4) involuntary
movements such as eye or muscle twitching;
(5) confusion; (6) nausea; (7) loss of awareness;
(8) convulsions; (9) cramps; and/or (10)
disorientation. Parents should monitor and ask
their children about the above symptoms-children
and teenagers may be more likely than adults to
experience these symptoms.
03 Basic Features
xx Some 3D pictures may startle viewers. The pregnant,
■■ Smart LED (Off / Low / Standard / High / Demo):
Controls LED backlight to maximize picture clarity.
xx The ideal viewing distance should be three times
or more the height of the screen. We recommend
sitting with viewer's eyes on a level with the screen.
3D
This exciting new feature enables you to view
3D content. In order to fully enjoy this feature,
you must purchase a pair of Samsung 3D
Active Glasses (SSG-2100AB, SSG-2200AR,
SSG-2200KR) to view 3D video.
Samsung 3D Active Glasses are sold
separately. For more detailed purchasing
information, contact the retailer where you
purchased this TV.
3D
xx Note that watching TV while sitting too close to the
screen for an extended period of time may weaken
your eyesight.
xx Note that watching TV while wearing 3D Active
Glasses for an extended period of time may cause a
headache or fatigue. If you feel headache, fatigue or
dizziness, stop watching TV and rest.
3D emitter
English
[BOOK-UC7000]Web Manual-Eng.indb 19
19
2010-03-31 오후 1:40:16
Basic Features
✎✎If there is any obstacle between the emitter and 3D
Active Glasses, the proper 3D effect may not be
obtained.
■■ 3D Mode: Select the 3D input format.
✎✎ If you want to feel the 3D effect fully, please wear
the 3D Active Glasses first, and then select 3D
Mode from the list below that provides the best
3d viewing experience.
✎✎ When watching 3D images, turn on 3D Active
Glasses.
3D Mode
Operation
Off
Turns the 3D function off.
2D → 3D
Side by Side
Top & Bottom
Line by Line
Vertical Stripe
Checker
Board
Frequency
Changes a 2D image to 3D.
Displays two images next to
each other.
Displays one image above
another.
Displays the images for the left
and right eye alternately in rows.
Displays the images for the
left and right eye alternately in
columns.
Displays the images for the
left and right eye alternately in
pixels.
Displays the images for the
left and right eye alternately in
frames.
✎✎ “Side by Side” and “Top & Bottom” are available
when the resolution is 720p, 1080i and 1080p in
DTV, HDMI and USB mode or when set to PC
and the PC is connected through an HDMI/DVI
cable.
✎✎ “Vertical Strip”, “Line by Line” and “Checker
Board” are available when the resolution is set to
PC and the PC is connected through an HDMI/
DVI cable.
■■ 3D Auto View (Off / On): If 3D Auto View is set to On,
a “Side-By-Side” format HDMI signal with one of the
resolutions below is automatically switched to 3D. Here,
correct 3D information must be sent from the HDMI 1.3
transmitter.
✎✎ If a 3D failure occurs due to a 3D information error,
set 3D Auto View to Off and manually select a
3D Mode using the 3D button or corresponding
menu.
✎✎ Support resolution (16:9 only)
Resolution
1280 x 720p
1920 x 1080i
1920 x 1080p
Frequency (Hz)
60 Hz
60 Hz
24 / 30 / 60 Hz
Resolution supported for HDMI PC mode
The resolution for HDMI PC mode is optimized to 1920 x
1080 input.
An input resolution other than 1920 x 1080 may not be
displayed properly in 3D display or full screen mode.
How to watch the 3D image
3D
To watch in 3D, wear 3D glasses and
press the power button on the glasses.
Watching 3D picture for a long time may
cause eye fatigue and/or dizziness.
OK
Cancel
U Move E Enter e Exit
3D
3D
Using
Using the
the LEFT
LEFT // RIGHT
RIGHT keys
keys on
on the
the remote
remote control,
control,
select
select the
the icon
icon suitable
suitable for
for the
the picture
picture on
on screen.
screen.
✎✎ “Frequency” displays the frequency (60Hz only)
when the resolution is set to PC.
■■ 3D → 2D (Off / On): Displays the image for the left eye
only.
U Move E Enter e Exit
✎✎ This function is deactivated when 3D Mode set to
“2D → 3D” or Off.
■■ 3D View point: The overall adjustment of 3D
perspective.
✎✎ This function is deactivated when 3D Mode is set
to “2D → 3D” or Off.
■■ Depth: Adjusts focus / depth in “2D → 3D” mode.
✎✎ This function is only activated when the 3D Mode
is “2D → 3D”.
■■ Picture Correction: Adjusts the images for the left and
right eye.
20
English
[BOOK-UC7000]Web Manual-Eng.indb 20
2010-03-31 오후 1:40:17
2. Press the ◄ or ► button, then select 3D.
xx The 3D Active Glasses may not work properly if there
is any other 3D product or electronic devices turned
on near the glasses or TV. If there is a problem, keep
other electronic devices as far away as possible from
the 3D Active Glasses.
To watch in 3D, wear 3D Active Glasses and press the
power button on the glasses.
3. Select OK, then press the ENTERE button.
xx Photos of Media Play are shown in “2D → 3D”
4. Using the ◄ or ► buttons on your remote control, select
the 3D Mode of the image you want to view.
xx If lying on your side, the 3D-effects may not be
✎✎ Some 3D modes may not be available depending
on the format of the image source.
Supported formats and operating specifications for
HDMI 1.4
mode only.
displayed.
xx Be sure to stay within the viewing angle and optimum
TV viewing distance when watching 3D pictures.
–– Otherwise, you may not be able to enjoy proper 3D
effects.
Source signal format
Standard HDMI 1.4 3D
1920x1080p@24Hz x 2
1920x2205p@24Hz
Picture Reset (OK / Cancel)
1280x720p@60Hz x 2
1280x1470p@60Hz
Resets your current picture mode to its default settings.
The mode is automatically switched to 3D in one of the
source signal formats above.
For the HDMI 1.4@24Hz format, the TV is optimized as
follows:
–– Resolution First Display Mode: If Auto Motion Plus
is set to Off, Clear or Standard, you can watch the
video at a high resolution optimized to the resolution
of the source video.
–– Judder Reduction Display Mode: When Auto
Motion Plus is set to Smooth or Custom, you can
watch a smooth picture without judder.
03 Basic Features
1. Press the 콘텐츠 button, then the Content View menu
will appear.
¦¦ Setting up the TV with Your PC
Set the input source to PC.
OO 메뉴m → Picture → ENTERE
Auto Adjustment t
Adjust frequency values/positions and fine tune the settings
automatically.
✎✎Not available when connecting with an HDMI/DVI cable.
Before using 3D function...
✎✎NOTE
xx You may notice a small amount of screen flickering
when watching 3D images in poor light conditions
(from a strobe light, etc.), or under a fluorescent lamp
(50Hz ~ 60Hz) or 3 wavelength lamp. If so, dim the
light or turn the lamp off.
xx 3D mode is automatically disabled in following cases:
when changing a channel or the input source, or
accessing Media Play or Internet@TV.
xx Some Picture functions are disabled in 3D mode.
xx PIP is not supported in 3D mode.
xx Auto Program is disabled in 3D mode.
xx 3D Active Glasses from other manufacturers may not
be supported.
xx When the TV is initially powered on, may take some
time until the 3D display is optimized.
Screen
■■ Coarse / Fine: Removes or reduces picture noise. If the
noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (Coarse) and Finetune again. After the noise has been reduced, readjust
the picture so that it is aligned to the center of screen.
■■ Position: Adjust the PC’s screen positioning if it does
not fit the TV screen. Press the ▲ or ▼ button to adjust
the Vertical-Position. Press the ◄ or ► button to adjust
the Horizontal-Position.
■■ Image Reset: Resets the image to default settings.
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
Depending on the version of Windows and the video card,
the actual screens on your PC will probably look different, but
the same basic set-up information will apply in most cases.
(If not, contact your computer manufacturer or Samsung
Dealer.)
English
[BOOK-UC7000]Web Manual-Eng.indb 21
21
2010-03-31 오후 1:40:17
Basic Features
1. Click on “Control Panel” on the Windows start menu.
2. Click on “Appearance and Themes” in the “Control
Panel” window and a display dialog-box will appear.
3. Click on “Display” and a display dialog box will appear.
4. Navigate to the “Settings” tab on the display dialog-box.
yy The correct size setting (resolution) [Optimum: 1920 X
1080 pixels]
yy If a vertical-frequency option exists on your display
settings dialog box, the correct value is “60” or “60 Hz”.
Otherwise, just click “OK” and exit the dialog box.
Sound Menu
¦¦ Changing the Preset Sound Mode
OO 메뉴m → Sound → SRS TheaterSound →
¦¦ Sound Settings
OO 메뉴m → Sound → ENTERE
SRS TruSurround HD (Off / On) t
(standard sound mode only)
This function provides a virtual 5.1 channel surround sound
experience through a pair of speakers using HRTF (Head
Related Transfer Function) technology.
SRS TruDialog (Off / On)
(standard sound mode only)
This function allows you to increase the intensity of a voice
over background music or sound effects so that dialog can
be heard more clearly.
ENTERE
Preferred Language
SRS TheaterSound t
■■ Standard: Selects the normal sound mode.
■■ Music: Emphasizes music over voices.
■■ Movie: Provides the best sound for movies.
(digital channels only)
Digital-TV broadcasts are capable of simultaneous
transmission of many audio tracks (for example,
simultaneous translations of the program into foreign
languages).
■■ Clear Voice: Emphasizes voices over other sounds.
✎✎You can only select a language among the ones being
■■ Amplify: Increase the intensity of high-frequency sound
to allow a better listening experience for the hearing
impaired.
Auto Stereo (Manual / Auto))
¦¦ Adjusting Sound Settings
OO 메뉴m → Sound → Equalizer → ENTERE
broadcasted.
Automatically sets the sound to stereo or mono.
Multi-Track Sound (MTS) t
(analog channels only)
Adjusts the sound mode (standard sound mode only).
■■ Mono: Choose for channels that are broadcasting in
mono or if you are having difficulty receiving a stereo
signal.
■■ Balance L/R: Adjusts the balance between the right and
left speaker.
■■ Stereo: Choose for channels that are broadcasting in
stereo.
■■ 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth
Adjustment): Adjusts the level of specific bandwidth
frequencies.
■■ SAP: Choose to listen to the Separate Audio Program,
which is usually a foreign-language translation.
Equalizer
■■ Reset: Resets the equalizer to its default settings.
✎✎Depending on the particular program being broadcast,
you can listen to Mono, Stereo or SAP.
Auto Volume (Off / Normal / Night)
To equalize the volume level on each channel, set to Normal.
■■ Night: This mode provides an improved sound
experience compared to Normal mode, making almost
no noise. It is useful at night.
22
English
[BOOK-UC7000]Web Manual-Eng.indb 22
2010-03-31 오후 1:40:18
A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. In
this case, set the TV to External Speaker.
✎✎When Speaker Select is set to External Speaker, the
volume and 조용히 buttons will not operate and the
sound settings will be limited.
✎✎When Speaker Select is set to External Speaker.
xx TV Speaker: Off, External Speaker: On
03 Basic Features
Setup Menu
Speaker Select (External Speaker / TV
Speaker)
¦¦ Setting the Time
OO 메뉴m → Setup → Time → ENTERE
Time
■■ Clock: Setting the clock is for using various timer
features of the TV.
✎✎When Speaker Select is set to TV Speaker.
OO The current time will appear every time you press
✎✎If there is no video signal, both speakers will be mute.
✎✎ If you disconnect the power cord, you have to set
xx TV Speaker: On, External Speaker: On
SPDIF Output
SPDIF (Sony Philips Digital Interface) is used to provide digital
sound, reducing interference going to speakers and various
digital devices such as an A/V Receiver/Home theater.
■■ Audio Format: During the reception of a digital TV
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.
■■ Audio Delay: Correct audio-video sync problems, when
watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
Sound Reset (OK / Cancel)
Reset all sound settings to the factory defaults.
the 정보표시 button.
the clock again.
Clock Mode (Auto / Manual)
–– Auto: Set the current time automatically using the
time from a digital channel.
The antenna must be connected in order to set
the time automatically.
✎✎
–– Manual: Set the current time manually.
Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually.
✎✎
Clock Set: Set the Month, Day, Year, Hour, Minute and
am/pm manually.
Available only when Clock Mode is set to
Manual.
✎✎
✎✎ You can set the Month, Day, Year, Hour and
Minute directly by pressing the number buttons
on the remote control.
¦¦ Using the Sleep Timer
OO 메뉴m → Setup → Time → Sleep Timer →
ENTERE
■■ Sleep Timer t : Automatically shuts off the TV
after a preset period of time. (30, 60, 90, 120, 150 and
180 minutes).
✎✎ To cancel the Sleep Timer, select Off.
English
[BOOK-UC7000]Web Manual-Eng.indb 23
23
2010-03-31 오후 1:40:18
Basic Features
¦¦ Setting the On / Off Timer
OO 메뉴m → Setup → Time → Timer 1 → ENTERE
You can set the TV to turn on automatically at a preset time.
■■ Timer 1 / Timer 2 / Timer 3: Three different on / off
timer settings can be made. You must set the clock first.
Timer 1
On Time
▲
00
Inactivate
▼
00
00
Inactivate
00
Source
10
Repeat
Antenna
TV
Sun
Tue
¦¦ Locking Programs
am
OO 메뉴m → Setup → Security → ENTERE
Wed
1
Thu
Fri
Security
Sat
Once
L Move U Adjust E Enter R Return
On Time / Off Time: Set the hour, minute, and activate
/ inactivate. (To activate the timer with the setting you’ve
chosen, set to Activate.)
Volume: Set the desired volume level.
Source: Select TV or USB content to be played when
the TV is turned on automatically. (USB can be selected
only when a USB device is connected to the TV)
Antenna (when the Source is set to TV): Select Air or
Cable.
Channel (when the Source is set to TV): Select the
desired channel.
Contents (when the Source is set to USB): Select a
folder in the USB device containing music or photo files
to be played when the TV is turned on automatically.
NOTE
✎✎
on by the Timer): The TV will be automatically turned off
after 3 hours of being left idle to prevent overheating.
Channel
Cable
Mon
✎✎
✎✎Auto Power Off (available only when the TV is turned
am
Off Time
Volume
Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat,
Sat~Sun or Manual to set at you convenience. If you
select Manual, you can set up the day you want to
activate the timer.
The c mark indicates the day is selected.
xx If there is no music file on the USB device or the
folder containing a music file is not selected, the
Timer function does not operate correctly.
xx When there is only one photo file in the USB,
the Slide Show will not play.
The PIN input screen appears, Enter your 4 digit PIN number.
■■ Child Lock (Off / On): Lock channels in Channel List,
to prevent unauthorized users, such as children, from
watching unsuitable program.
✎✎ Available only when the Input source is set to TV.
■■ Change PIN: The Change PIN screen will appear.
Choose any 4 digits for your PIN and enter them. As
soon as the 4 digits are entered, the Confirm New
PIN screen appears. Re-enter the same 4 digits. When
the Confirm screen disappears, your PIN has been
memorized.
¦¦ Other Features
OO 메뉴m → Setup → ENTERE
Menu Language
Set the menu language.
1. Select Menu Language and press the ENTERE
button.
2. Choose desired language and press the ENTERE
button.
xx If a folder name is too long, the folder cannot be
✎✎Choose between English, Español and Français.
xx Each USB you use is assigned its own folder.
When using more than one of the same type of
USB, make sure the folders assigned to each
USB have different names.
Caption
selected.
(On-Screen Text Messages)
■■ Caption (Off / On): You can switch the caption function
on or off. If captions are not available, they will not be
displayed on the screen.
✎✎ The Caption feature doesn’t work in Component,
HDMI or PC modes.
24
English
[BOOK-UC7000]Web Manual-Eng.indb 24
2010-03-31 오후 1:40:18
✎✎ The availability of captions depends on the
program being broadcast.
Default / English / Korean: (analog channels only)
The Analog Caption function operates in either analog
TV channel mode or when a signal is supplied from
an external device to the TV. (Depending on the
broadcasting signal, the Analog Caption function may or
may not work with digital channels.)
Default / Service1~Service6: (digital channels only) The
Digital Captions function works with digital channels.
Service1~6 may not be available in digital caption
mode depending on the broadcast.
✎✎
■■ Digital Caption Options: (digital channels only)
Size: Options include Default, Small, Standard and
Large. The default is Standard.
Foreground Color: Options include Default, White,
Black, Red, Green, Blue, Yellow, Magenta and Cyan. You
can change the color of the letter. The default is White.
Background Color: Options include Default, White,
Black, Red, Green, Blue, Yellow, Magenta and Cyan.
You can change the background color of the caption.
The default is Black.
Foreground Opacity: This adjusts the opacity of text.
Options include Default, Transparent, Translucent, Solid
and Flashing.
Background Opacity: This adjusts the opacity of
the caption background. Options include Default,
Transparent, Translucent, Solid and Flashing.
Return to Default: This option sets each Size,
Foreground Color, Background Color, Foreground
Opacity and Background Opacity to its default.
NOTE
✎✎
xx Digital Caption Options are available only
when Default and Service1 ~ Service6 can be
selected in Caption Mode.
xx The availability of captions depends on the
program being broadcasted.
xx The Default setting follows the standards set by
the broadcaster.
xx The Foreground and Background cannot be set
to have the same color.
xx You cannot set both the Foreground Opacity
and the Background Opacity to Transparent.
Network (Network Type / Network Setup
/ Network Test / SWL (Samsung Wireless
Link) / SWL connect)
General
■■ Game Mode (Off / On): When connecting to a game
console such as PlayStation™ or Xbox™, you can enjoy
a more realistic gaming experience by selecting the
game menu.
✎✎NOTE
xx Precautions and limitations for game mode
03 Basic Features
■■ Caption Mode: You can select the desired caption
mode.
–– To disconnect the game console and connect
another external device, set Game Mode to Off in
the setup menu.
–– If you display the TV menu in Game Mode, the
screen shakes slightly.
xx Game Mode is not available when the input source
is set to TV or PC.
xx After connecting the game console, set Game Mode
to On. Unfortunately, you may notice reduced picture
quality.
xx If Game Mode is On:
–– Picture mode is set to Standard and Sound mode
is set to Movie.
–– Equalizer is not available.
■■ BD Wise (Off / On): Provides the optimal picture quality
for Samsung DVD, Blu-ray and Home Theater products
which support BD Wise. When BD Wise is turned On,
the picture mode is automatically changed to the optimal
resolution.
✎✎ Available when connecting Samsung products
that support BD Wise through a HDMI cable.
■■ Menu Transparency (Bright / Dark): Set the
Transparency of the menu.
■■ Auto Wall Mount: After installing your TV on the WallMount, you can adjust the location and angle of the TV
conveniently using the remote control.
■■ Melody (Off / Low / Medium / High): Set so that a
melody plays when the TV is turned on or off.
✎✎ Melody is disabled when FastStart is On.
■■ FastStart (Off / On): When the TV is powered on, the
screen will come on quickly with this feature.
Wireless Remote Control (Off / On)
Turn on/off or give permission to Samsung mobile phones/
devices.
You must have a Samsung Mobile phone/device which
supports Wireless Remote Control. For more details, refer
to each device's manual.
For details on set up options, refer to the “Network
Connection” instructions (p. 30).
English
[BOOK-UC7000]Web Manual-Eng.indb 25
25
2010-03-31 오후 1:40:19
Basic Features
Support Menu
¦¦ Picture In Picture (PIP)
OO 메뉴m → Support → ENTERE
PIP t
You can watch the TV tuner and one external video source
simultaneously. PIP (Picture-in-Picture) does not function in
the same mode.
OO 메뉴m → Setup → PIP → ENTERE
✎✎NOTE
xx For PIP sound, refer to the Sound Select
instructions.
xx If you turn the TV off while watching in PIP mode, the
PIP window will disappear.
xx You may notice that the picture in the PIP window
becomes slightly unnatural when you use the main
screen to view a game or karaoke.
xx While Internet@TV is in operation, the PIP function
cannot be used.
✎✎Self Diagnostic might take few seconds, this is part of
the normal operation of the TV.
■■ Picture Test: Use to check for picture problems.
Yes: If the test pattern does not appear or there is
noise in the test pattern, select Yes. There may be a
problem with the TV. Contact Samsung’s Call Center for
assistance (1-800-SAMSUNG).
No: If the test pattern is properly displayed, select No.
There may be a problem with your external equipment.
Please check your connections. If the problem persists,
refer to the external device’s user manual.
■■ Sound Test: Use the built-in melody sound to check for
sound problems.
✎✎ If you hear no sound from the TV’s speakers,
xx PIP Settings
Main picture
Component, HDMI1/DVI,
HDMI2, HDMI3, HDMI4,
PC
Self Diagnosis
Sub picture
TV
■■ PIP (Off / On): Activate or deactivate the PIP function.
■■ Air/Cable (Air / Cable): Select either Air or Cable as the
input source for the sub-screen.
■■ Channel: Select the channel for the sub-screen.
■■ Size (Õ / à / À / Œ): Select a size for the subpicture.
■■ Position (à / – / — / œ): Select a position for the
sub-picture.
✎✎ In Double (À, Œ) mode, Position cannot be
selected.
■■ Sound Select (Main / Sub): You can choose the
desired sound (Main / Sub) in PIP mode.
before performing the sound test, make sure
Speaker Select is set to TV Speaker in the
Sound menu.
✎✎ The melody will be heard during the test even if
Speaker Select is set to External Speaker or the
sound is muted by pressing the MUTE button.
Yes: If you can hear sound only from one speaker or not
at all during the sound test, select Yes. There may be a
problem with the TV. Contact Samsung’s Call Center for
assistance (1-800-SAMSUNG).
No: If you can hear sound from the speakers, select No.
There may be a problem with your external equipment.
Please check your connections. If the problem persists,
refer to the external device’s user manual.
■■ Signal Information: (digital channels only) An HD
channel’s reception quality is either perfect or the
channels are unavailable. Adjust your antenna to
increase signal strength.
■■ Troubleshooting: If the TV seems to have a problem,
refer to this description.
✎✎ If none of these troubleshooting tips apply, contact
the Samsung customer service center.
26
English
[BOOK-UC7000]Web Manual-Eng.indb 26
2010-03-31 오후 1:40:19
Software Upgrade can be performed by network
connection or downloading the latest firmware from “www.
samsung.com.” to a USB memory device.
Current Version - the software already installed in the TV.
✎✎Software is represented as “Year/Month/Day_Version.”
Software Upgrade
Current Version
2010/01/18_000001
By USB
By Online
By Channel
Standby Mode Upgrade : Off
Alternative Software
----/--/--_-----
►
U Move E Enter R Return
■■ By Channel: Upgrades the software using the
broadcasting signal.
■■ Standby Mode Upgrade: You can upgrade software
while in standby mode.
■■ Alternative Software (backup): Displays the software
version downloaded through By Online. During the
software upgrading, When the Upgrade will discontinue
from last step, this function be activated.
03 Basic Features
Software Upgrade
HD Connection Guide
Refer to this information when connecting external devices
to the TV.
Contact Samsung
View this information when your TV does not work properly
or when you want to upgrade the software. You can find
information regarding our call centers and how to download
products and software.
Installing the Latest Version
TV Rear Panel
■■ By USB: Insert a USB
drive containing the
firmware upgrade file,
downloaded from “www.
samsung.com,” into the
or
TV. Please be careful not
to disconnect the power or
remove the USB drive until
upgrades are complete.
USB Drive
The TV will be turned off
and on automatically after
completing the firmware upgrade. When software is
upgraded, video and audio settings you have made will
return to their default settings. We advise you to to write
down your settings so that you can easily reset them
after the upgrade.
■■ By Online: Upgrade the software using the Internet.
✎✎ First, configure your network. For detailed
procedures on using the Network Setup, refer to
the “Network Connection” instructions.
✎✎ If the internet connection doesn’t operate properly,
the connection may be broken. Please retry
downloading. If the problem persists, download by
USB and upgrade.
English
[BOOK-UC7000]Web Manual-Eng.indb 27
27
2010-03-31 오후 1:40:20
Advanced Features
Network Connection
You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless
connection.
¦¦ Connecting to a Wired Network
You can attach your TV to your LAN using cable in three ways:
yy You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat
5 cable. See the diagram below.
The Modem Port on the Wall
TV Rear Panel
External Modem
(ADSL / VDSL / Cable TV)
Modem Cable (Not Supplied)
LAN Cable (Not Supplied)
LAN Adapter (Supplied)
yy You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a IP Sharer which is connected
to an external modem. Use a Cat 5 cable for the connection. See the diagram below.
The Modem Port on the Wall
External Modem
(ADSL / VDSL / Cable TV)
Modem Cable (Not Supplied)
TV Rear Panel
IP Sharer
(having DHCP server)
LAN Cable (Not Supplied)
LAN Cable
(Not Supplied)
LAN Adapter (Supplied)
yy Depending on how your network is configured, you may be able to attach your TV to your LAN by connecting the LAN
port on the back of your TV directly to a network wall outlet using a Cat 5 cable. See the diagram below. Note that the wall
outlet is attached to a modem or router elsewhere in your house.
The LAN Port on the Wall
TV Rear Panel
LAN Cable (Not Supplied)
LAN Adapter (Supplied)
If you have a Dynamic Network, you should use an ADSL modem or router that supports Dynamic Host Configuration
Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway,
and DNS values your TV needs to access the Internet so you don’t have to enter them manually. Most home networks are
Dynamic Networks.
Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address,
subnet mask, gateway, and DNS values manually on your TV’s Cable Setup Screen when you set up the network
connection. To get the IP address, subnet mask, gateway, and DNS values, contact your Internet Service Provider (ISP). If
you have a Windows computer, you can also get these values through your computer.
You can use ADSL modems that support DHCP if your network requires a Static IP address. ADSL modems that
support DHCP also let you use Static IP addresses.
✎✎
28
English
[BOOK-UC7000]Web Manual-Eng.indb 28
2010-03-31 오후 1:40:21
Network Setup (Manual)
Use the Automatic Network Setup when connecting your
TV to a network that supports DHCP. To set up your TV’s
cable network connection automatically, follow these steps:
Use the Manual Network Setup when connecting your TV to
a network that requires a Static IP address.
How to set up automatically
To get the Network connection values on most Windows
computers, follow these steps:
1. Right click the Network icon on the bottom right of the
screen.
1. Connect your TV to your LAN as described in the
previous section.
2. Turn on your TV, press the 메뉴 button on your remote,
use the ▲ or ▼ button to select Setup, and then press
the ENTERE button.
3. Use the ▲ or ▼ button to select Network in the Setup
menu, and then press the ENTERE button. The
Network screen appears.
: Wired
►
Network Setup
Network Test
SWL (Samsung Wireless Link)
2. In the pop-up menu that appears, click Status.
3. On the dialog that appears, click the Support tab.
4. On the Support Tab, click the Details button. The
Network connection values are displayed.
How to set up manually
Network
Network Type
Getting the Network Connection Values
04 Advanced Features
Network Setup (Auto)
: Off
2. Set Internet Protocol Setup to Manual.
SWL connect
U Move E Enter R Return
4. On the Network screen, select Network Type.
5. Set Network Type to Wired.
6. Select Network Setup. The Network Setup screen
appears.
Network Setup
Internet Protocol Setup
: Auto
IP Address
:
Subnet Mask
:
Gateway
:
DNS
: Auto
DNS Server
:
To set up your TV’s cable network connection manually,
follow these steps:
1. Follow Steps 1 through 6 in the “How to set up
automatically” procedure.
3. Press the ▼ button on your remote to go to the first
entry field.
4. Enter the IP Address, Subnet Mask, Gateway, and
DNS Server values. Use the number buttons on your
remote to enter numbers and the arrow buttons to move
from one entry field to another.
5. When done, press the 복귀 button on your remote.
6. Select Network Test to check the Internet connectivity.
►
U Move E Enter R Return
7. Set Internet Protocol Setup to Auto.
8. Auto acquires and enters the needed Internet values
automatically.
9. Wait two minutes, and then press the 복귀 button on
your remote.
10. If the Network Function has not acquired the network
connection values, go to the directions for Manual.
English
[BOOK-UC7000]Web Manual-Eng.indb 29
29
2010-03-31 오후 1:40:21
Advanced Features
¦¦ Connecting to a Wireless Network
To connect your TV to your network wirelessly, you need a wireless router or modem and a Samsung Wireless LAN Adapter
(WIS09ABGN, WIS09ABGN2, WIS10ABGN), which you connect to your TV’s back or side panel USB jack. See the illustration
below.
✎✎ To use the SWL (Samsung Wireless Link) function, connect to the USB 1 (HDD) port.
The LAN Port on the Wall
Wireless IP Sharer
(AP having DHCP Server)
TV Rear Panel
or
LAN Cable (Not Supplied)
Samsung Wireless
LAN Adapter
Samsung’s Wireless LAN adapter is sold separately and is offered by select retailers, Ecommerce sites and Samsungparts.
com. Samsung’s Wireless LAN adapter supports the IEEE 802.11A/B/G and N communication protocols. Samsung
recommends using IEEE 802.11N. When you play video over a IEEE 802.11B/G connection, the video may not play smoothly.
✎✎NOTE
xx You must use the “Samsung Wireless LAN Adapter” (WIS09ABGN) to use a wireless network.
xx Samsung’s Wireless LAN Adapter is sold separately. The SAMSUNG Wireless LAN Adapter is offered by select
retailers, Ecommerce sites and Samsungparts.com.
xx To use a wireless network, your TV must connect wirelessly to a wireless IP sharer (either a router or a modem). If the
wireless IP sharer supports DHCP, your TV can use a DHCP or static IP address to connect to the wireless network.
xx Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer
is currently being used by another device nearby, this will result in interference and communication failure.
xx If you apply a security system other than the systems listed blow, it will not work with the TV.
xx If you select the Pure High-throughput (Greenfield) 802.11n mode and set your AP's Security Encryption type to WEP,
TKIP or TKIPAES (WPS2Mixed), your Samsung TV will not support the connection in compliance with new Wi-Fi
certification specifications.
xx If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button
Configuration) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in
either mode.
xx If your router, modem, or device isn’t certified, it may not connect to the TV via the “Samsung Wireless LAN Adapter.”
xx Connection Methods: You can setup the wireless network connection six ways.
––
––
––
––
––
––
Samsung Auto Configuration - For non-Samsung devices.
PBC (WPS)
Auto Setup (Using the Auto Network Search function)
Manual Setup
SWL (Samsung Wireless Link) - For Samsung devices only.
Ad-Hoc
xx The Samsung Wireless LAN Adapter may not be recognized or work properly when connecting via a USB hub or via
a USB extension cable other than the one available from Samsung.
30
English
[BOOK-UC7000]Web Manual-Eng.indb 30
2010-03-31 오후 1:40:23
The Samsung Auto Configuration function lets you connect
your Samsung TV automatically to non-Samsung wireless
APs. If your non-Samsung AP does not support Samsung
Auto Configuration, you must connect using one of the
other methods: PBC (WPS), auto configuration, or manual
configuration.
✎✎To use this function, you must set SWL (Samsung
Network Setup (PBC (WPS))
How to set up using PBC (WPS)
If your router has a PBC (WPS) button, follow these steps:
1. Connect your TV to your LAN as described in the
previous section.
2. Turn on your TV, press the 메뉴 button on your remote,
use the ▲ or ▼ button to select Setup, and then press
the ENTERE button.
Wireless Link) to Off in the TV’s on-screen menu.
3. Use the ▲ or ▼ button to select Network in the Setup
menu, and then press the ENTERE button.
Auto Configuration on www.samsung.com.
4. On the Network screen, select Network Type.
✎✎You can check for equipment that supports Samsung
How to set up using Samsung Auto Configuration
1. Place the AP and TV next to each other and turn them
on.
5. Set Network Type to Wireless.
6. Select Network Setup. The Network Setup screen
appears.
✎✎ Because AP booting times vary, you may have
to wait approximately two minutes for your AP to
boot up.
✎✎ Ensure the LAN cable is connected to the
WAN port of the AP during Samsung Auto
Configuration. If it is not connected, Samsung
Auto Configuration only confirms that the TV is
connected to the AP, but does not confirm it is
connected to the Internet.
2. After 2 minutes, connect the Samsung Wireless LAN
Adapter to the TV. When the Samsung Wireless LAN
Adapter establishes a connection with your TV, a pop-up
window appears.
3. As soon as a connection is established, place the AP
parallel to the Samsung Wireless LAN Adapter and not
farther than 9 and 7/8s inches (25cm) from it.
4. Wait until the connection is automatically established.
✎✎ If Samsung Auto Configuration does not connect
your TV to your AP, a pop-up window appears on
the screen notifying you of the failure. If you want
to try using Samsung Auto Configuration again,
reset the AP, disconnect the Samsung Wireless
LAN Adapter and then try again from Step 1. You
can also choose one of the other connection
setup methods: PBC (WPS), auto, or manual.
5. Place the AP in a desired location.
✎✎ If the AP settings change or you install a new
AP, you must perform the Samsung Auto
Configuration procedure again, beginning from
Step 1.
Network Setup
Select a network
: Not Selected ►
Internet Protocol Setup
: Auto
IP Address
:
Subnet Mask
:
Gateway
:
DNS
: Auto
DNS Server
:
PBC(WPS) U Move E Enter R Return
7. Press the Red button on your remote.
8. Press the PBC (WPS) button on your router within 2
minutes. Your TV player automatically acquires all the
network setting values it needs and connects to your
network.
9. After the network connection is set up, press the 복귀
button to exit the Network Setup screen.
Network Setup (Auto)
Most wireless networks have an optional security system
that requires devices that access the network to transmit
an encrypted security code called an Access or Security
Key. The Security Key is based on a Pass Phrase, typically
a word or a series of letters and numbers of a specified
length you were asked to enter when you set up security for
your wireless network. If you use this method of setting up
the network connection, and have a Security Key for your
wireless network, you will have to enter the Pass Phrase
during the setup process.
English
[BOOK-UC7000]Web Manual-Eng.indb 31
04 Advanced Features
Network Setup (Samsung Auto
Configuration)
31
2010-03-31 오후 1:40:24
Advanced Features
How to set up automatically
To set up the wireless connection automatically, follow these
steps:
1. Follow Steps 1 through 6 in the “How to set up using
PBC (WPS)” procedure.
2. Press the ▼ button to select Internet Protocol Setup,
and then press the ENTERE button. Press the ▲ or
▼ button to select Auto, and then press the ENTERE
button.
3. Press the ▲ button to go to Select a Network, and
then press the ENTERE button. The Network function
searches for available wireless networks. When done, it
displays a list of the available networks.
4. In the list of networks, press the ▲ or ▼ button to select
a network, and then press the ENTERE button.
✎✎ If the AP is set to Hidden (Invisible), you have
to select Add Network and enter the correct
Network Name (SSID) and Security Key to
establish the connection.
5. If the Security/PIN pop-up appears, go to Step 6. If the
Network Connecting Screen appears, go to Step 10.
6. Press the ▲ or ▼ button to select Security or PIN. For
most home networks, you would select Security (for
Security Key). The Security Screen appears.
Network Setup
Security Key
0 entered
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
0~9
Number
Lower case
B
9. When done, press the Blue button on your remote. The
Network Connecting screen appears.
10. Wait until the connection confirmation message is
displayed, and then press the ENTERE button. The
Network Setup screen re-appears.
11. To test the connection, press the 복귀 button to select
Network Test, and then press the ENTERE button.
Network Setup (Ad-Hoc)
You can connect to a mobile device without an access point
through the “Samsung Wireless LAN Adapter” by using a
peer to peer network.
✎✎This function is available when SWL (Samsung
Wireless Link) is set to Off in the TV’s on-screen
menu.
How to connect to new Ad-hoc device
1. Follow Steps 1 through 6 in the “How to set up using
PBC (WPS)” (p. 34).
2. Choose Select a network. A list of devices/networks
appears.
3. While in the device list, press the Blue button on the
remote.
✎✎ The message Ad-hoc is a direct Wi-Fi
connection with cell phone or PC. The existing
network system may have limited functionality.
Do you want to change the network
connection? is displayed.
4. Input the generated Network Name (SSID) and
Security Key into the device you want to connect.
Delete
How to connect an existing Ad-hoc device
Space
1. Follow Steps 1 through 6 in the “How to set up using
PBC (WPS)” (p. 34).
n Move E Enter R Return
7. On the Security screen, enter your network’s Pass
Phrase.
✎✎ You should be able to find the Pass Phrase on
one of the set up screens you used to set up your
router or modem.
8. To enter the Pass Phrase, follow these general
directions:
2. Choose Select a network. The Device/Network list
appears.
3. Select the device you want in the Device list.
4. If security key is required, input the security key.
✎✎ If network doesn’t operate normally, check
the Network Name (SSID) and Security Key
again. An incorrect Security Key may cause a
malfunction.
–– Press the number buttons on your remote to enter
numbers.
–– Use the direction buttons on your remote to move
from button to button on the Security Key screen.
–– Press the Red button to change case or display
symbols/characters.
–– To a enter letter or symbol, move to the letter or
symbol, and then press the ENTERE button.
–– To delete the last letter or number you entered, press
the Green button on your remote.
32
English
[BOOK-UC7000]Web Manual-Eng.indb 32
2010-03-31 오후 1:40:24
SWL (Samsung Wireless Link)
If the other methods do not work, you need to enter the
Network setting values manually.
This function lets you connect your TV to a Samsung device
(router, etc.) that supports PBC (WPS) . You can connect the
TV to the device even if a sharer is not connected to the TV.
Getting the Network Connection Values
To get the Network connection values on most Windows
computers, follow these steps:
1. Right click the Network icon on the bottom right of the
screen.
2. In the pop-up menu, click Status.
3. On the dialog that appears, click the Support tab.
4. On the Support tab, click the Details button. The
Network settings are displayed.
How to set up manually
To enter the Network connection values manually, follow
these steps:
1. Follow Steps 1 through 6 in the “How to set up using
PBC (WPS)” (p. 34).
2. Press the ▼ button to select Internet Protocol Setup,
and then press the ENTERE button. Press the ▲ or ▼
button to select Manual, and then press the ENTERE
button.
3. Press the ▼ button to go to the first entry field (IP
Address).
4. Use the number buttons to enter numbers.
5. When done with each field, use the ► button to move
successively to the next field. You can also use the other
arrow buttons to move up, down, and back.
6. Enter the IP Address, Subnet Mask, and Gateway
values.
7. Press the ▲ or ▼ button to go to DNS.
8. Press the ▼ button to go to the first DNS entry field.
Enter the numbers as above.
9. When done, press the ▲ button to go to Select a
Network. Select your network, and then press the
ENTERE button.
10. Go to Step 4 in the “How to set up automatically” (p.
34), and follow the directions from that point on.
✎✎For the TV to use Internet@TV, the AP (access point)
must be connected to the wireless network.
✎✎If a Samsung Wireless Lan Adapter is connected to the
USB 2 port, the network may not operate normally. We
recommend connecting it to the USB 1 (HDD) port.
04 Advanced Features
Network Setup (Manual)
✎✎Only sharers using the 2.4 Ghz band are supported.
Sharers using the 5 Ghz band are not supported.
SWL connect
You can directly connect the TV to a Samsung device that
supports PBC (WPS).
✎✎This function is available when SWL (Samsung
Wireless Link) is set to On.
✎✎To use the SWL (Samsung Wireless Link) function,
connect the Samsung Wireless LAN Adpater to the
USB 1 (HDD) port.
How to connect using Samsung Wireless Link
To connect using Samsung Wireless Link, follow these steps:
1. Follow Steps 1 through 5 in the “How to set up using
PBC (WPS)” (p. 34).
2. Select SWL(Samsung Wireless Link) by using the ▼
button, and then press the ENTERE button to turn it
On.
3. Select SWL connect by using the ▼ button, and then
press the ENTERE button.
4. If the “Press the PBC button on the device which
supports PBC button to connect within 120
seconds” message appears, press the PBC button on
the device to connect.
✎✎ For more information, refer to the wireless network
setup manual of the device to be connected.
5. If the TV connects properly to the device after the count
in the message box starts, then the message box
disappears automatically.
✎✎ If the connection fails, please retry after 2 minutes.
English
[BOOK-UC7000]Web Manual-Eng.indb 33
33
2010-03-31 오후 1:40:24
Advanced Features
If Your TV Fails to Connect to the Internet
Your TV may not be able to connect to the Internet
because your ISP has permanently registered the
MAC address (a unique identifying number) of your
PC or modem, which it then authenticates each time
you connect to the Internet as a way of preventing
unauthorized access. As your TV has a different MAC
address, your ISP can not authenticate its MAC address,
and your TV can not connect.
To resolve this problem, ask your ISP about the
procedures required to connect devices other than a PC
(such as your TV) to the Internet.
If your Internet service provider requires an ID or password
to connect to the Internet, your TV may not be able to
connect to the Internet. If this is the case, you must enter
your ID or password when connecting to the Internet.
The internet connection may fail because of a firewall
problem. If this is the case, contact your Internet service
provider.
If you cannot connect to the Internet even after you have
followed the procedures of your Internet service provider,
please contact Samsung Electronics at 1-800-SAMSUNG.
¦¦ Using Data Service
Allows the user to use information (text, still images,
graphics, documents, software, etc.) transmitted via
broadcast media.
Auto Run Data Service (On / Off)
Sets whether or not to automatically run data service. Auto
Run Data Service automatically runs data service without
user intervention.
✎✎If any other secondary function is under way, Auto Run
Data Service may not work.
Using Data Service
If the channel you are currently watching provides data
service, you can enjoy a variety of data services by pressing
the or red
button.
3. Move to a desired option by pressing the wheel
(▲/▼/◄/►) button on the data service screen and then
press OKE. The selected service will be started.
✎✎ If a Color button of a certain function appears on
the screen, you can use the offered function by
pressing the corresponded button.
4. If you press 종료 button, data service will be closed.
Main Data Service buttons and their functions
Button
Operation
Displays the Data Service list and
(Data Service) immediately starts Data Service.
Returns to the previous screen.
복귀 R
Perform functions corresponding to each
Color button image displayed on the
Color Button screen during Data Service.
Operations may differ depending on
the service provider.
Text can be inputted using the numbers
and letters printed on and above the
numeric keys on the remote control. If
you input the numeric keys on the remote
control one by one into the blank where
the cursor is located on the text input
screen, the corresponding lettering,
Symbol
numbers or special characters will be
displayed.
e.g., If you press the number 3 key in
rapid succession, then the assigned
letters (D, E, and F) and the number 3 will
alternately appear in order of input.
Switches to teletext mode or Returns to
the previous screen.
TEXT
Operations may differ depending on
the service provider.
Wheel
Moves the Data Service menu up,
(▲/▼/◄/►) down, left and right.
Runs a selected item.
ENTERE
Stops a running Data Service.
종료 e
✎✎
✎✎
✎✎Provided Data Service information may vary depending
on broadcast.
✎✎While using data service, changing the channel using the
numeric buttons may not be possible depending on the
service.
1. Press the
button. Select a desired service by
pressing the wheel (▲/▼/◄/►) and ENTERE buttons.
✎✎ If Auto Run Data Service is On, the data service
will automatically run with loading banner. In this
case, the
button does not work.
2. Press the red button. The data service screen will be
displayed.
34
English
[BOOK-UC7000]Web Manual-Eng.indb 34
2010-03-31 오후 1:40:25
ມ❑ၙॵᨕ
Enjoy photos, music and/or movie files saved on
a USB Mass Storage Class (MSC) device.
04 Advanced Features
Media Play
MediaPlay
Videos
O
메뉴m → Application → Content View
→ Media Play → ENTERE
SUM
Change Device
View Devices E Enter R Return
¦ Connecting a USB Device
1. Turn on your TV.
TV Rear Panel
2. Connect a USB device containing photo, music and/or movie files to the USB 1
(HDD) or USB 2 jack on the side of the TV.
3. When USB is connected to the TV, a popup window appears. Then you can
select Media Play.
or
USB Drive
¦ Connecting to your PC through a network
You can play pictures, music and videos saved on your PC through a network connection in the Media Play mode.
✎ If you want to use Media Play to play files saved on your PC over your TV, you should download “PC Share Manager”
and users manual from “www.samsung.com.”
TV Rear Panel
PC
LAN
or
LAN Adapter
(Supplied)
Samsung
Wireless
LAN Adapter
External Modem
(ADSL/VDSL/Cable TV)
LAN Cable (Not Supplied)
Wireless IP Sharer
Modem Cable (Not Supplied)
LAN Cable (Not Supplied)
LAN Cable (Not Supplied)
LAN Cable (Not Supplied)
1. For more information on how to configure your network, refer to “Network Connection” (p. 30).
– You are recommended to locate both the TV and the PC in same subnet. The first 3 parts of the subnet address of the
TV and the PC IP addresses should be the same and only the last part (the host address) should be changed. (e.g. IP
Address: 123.456.789.**)
2. Using a LAN cable, connect between the external modem and the PC onto which the Samsung PC Share Manager
Program will be installed.
– You can connect the TV to the PC directly without connecting it through a Sharer (Router).
English
[BOOK-UC7000]Web Manual-Eng.indb 35
35
2010-03-31 오후 1:40:27
Advanced Features
✎✎No supported functions when connecting to the PC through network:
xx The Background Music and Background Music Setting functions.
xx Sorting files by preference in the Photos, Music, and Videos folders.
xx The � (REW) or µ (FF) button while a movie is playing.
✎✎The Divx DRM, Multi-audio, embedded caption does not supported.
✎✎Samsung PC Share manager should be permitted by the firewall programme on your PC.
✎✎When you use Media Play mode through a network connection, According to functions of the provided server:
xx The sorting method may vary.
xx The scene search function may not be supported.
xx The Play Continuously function, which resumes playing of a video, may not be supported.
–– The Play Continuously function does not support multiple users. (It will have only memorised the point where the
most recent user stopped playing.)
xx The ◄ or ► button may not work depending on the content information.
xx You may experience file stuttering while playing a video in Media Play through a network connection.
✎✎It might not work properly with unlicenced multimedia files.
✎✎Need-to-Know List before using Media Play
xx MTP (Media Transfer Protocol) is not supported.
xx The file system supports FAT16, FAT32 and NTFS.
xx Certain types of USB Digital camera and audio devices may not be compatible with this TV.
xx Media Play only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class Bulk-Only
Transport device. Examples of MSC are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not
supported). Devices should be connected directly to the TV’s USB port.
xx Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data.
SAMSUNG is not responsible for any data file damage or data loss.
xx Connect a USB HDD to the dedicated port, USB 1 (HDD) port.
xx Do not disconnect the USB device while it is loading.
xx The higher the resolution of the image, the longer it takes to display on the screen.
xx The maximum supported JPEG resolution is 15360X8640 pixels.
xx For unsupported or corrupted files, the “Not Supported File Format” message is displayed.
xx If the files are sorted by Basic View, up to 1000 files can be displayed in each folder.
xx MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management
(DRM) is a technology that supports the creation of content, the distribution and management of the content in an
integrated and comprehensive way, including the protection of the rights and interests of the content providers, the
prevention of the illegal copying of contents, as well as managing billings and settlements.
xx If more than 2 PTP devices are connected, you can only use one at a time.
xx If more than two MSC devices are connected, some of them may not be recognized. A USB device that requires high
power (more than 500mA or 5V) may not be supported.
xx If an over-power warning message is displayed while you are connecting or using a USB device, the device may not
be recognized or may malfunction.
xx If the TV has been no input during time set in Auto Protection Time, the Screensaver will run.
xx The power-saving mode of some external hard disk drives may be released automatically when connected to the TV.
xx If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read.
xx If a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list is
not played, connect the USB device to the PC, format the device and check the connection.
xx If a file deleted from the PC is still found when Media Play is run, use the “Empty the Recycle Bin” function on the PC
to permanently delete the file.
36
English
[BOOK-UC7000]Web Manual-Eng.indb 36
2010-03-31 오후 1:40:28
Move to the file you desired using the up/down/right/left buttons and then press the ENTERE or � (Play) button. The file is
played.
✎✎Supports the View Devices and Home in Media Play homepage.
Information:
You can ascertain the selected
file name and the number of files
and page.
Videos
/Movie 01.avi
1/1 page
Movie 01
2010/01/10
Movie 03
Movie 02
2010/01/16
Movie 04
2010/01/12
2010/01/16
Movie 05
2010/01/12
Sort List Section:
Displays sorting standard.
04 Advanced Features
¦¦ Screen Display
File List Section:
You can confirm the files
and groups that is sorted by
each category.
✎✎ Sorting standard is
different depending on the
contents.
SUM
Change Device
Select
Sorting T Tools
Operation Buttons
Red (Change Device): Selects a connected device.
B Green (Preference): Sets the file preference. (not supported in Basic view)
Yellow (Select): Selects multiple files from file list. Selected files are marked with a symbol.
Blue (Sorting): Selects the sort list.
T Tools: Displays the option menu.
✎✎ Using the (REW) � or µ (FF) button, file list can move to next or previous page.
Recorded TV
To use the recording or Timeshift Mode function, the connected USB device must be available for recording. Device format
is recommended to use USB HDD.
✎✎During the Device formatting, do not disconnect the device while formatting is in progress. If you format the device, all
files will be deleted.
✎✎Before formatting your device to the tv, please back up your files to prevent them from damage or loss of data.
SAMSUNG is not responsible for any data file damage or data loss.
Playing Recorded TV Programme
1. Press the ◄ or ► button to select Recorded TV, then press
the ENTERE button in the Media Play menu.
Recorded TV / .../ American Chopper
1/8 Page
2. Press the ◄/►/▲/▼ button to select the desired file in the file
list.
3. Press the ENTERE button or � (Play) button.
–– The selected file is displayed on the top with its playing time.
–– During playing the recorded TV programme, you can search
using the ◄ and ► button.
Change Device
Select
Sorting T Tools
Using the Timeshift Mode function t
If you missed a live broadcast, you can see from the recorded broadcast using this feature.
When the Timeshift Mode is set to Auto, the TV stores the channel you watch currently to record automatically.
When the Timeshift Mode is set to Manual, if you press the � (Play) button, the TV stores the channel from the point of
view you want to record.
English
[BOOK-UC7000]Web Manual-Eng.indb 37
37
2010-03-31 오후 1:40:29
Advanced Features
✎✎NOTE
xx Recorded videos are DRM (digital rights management) protected and cannot be played on a PC or other TVs, nor can
they be played when the main board of the TV is changed.
xx Data broadcasts cannot be recorded.
xx The availability of both recording and the Timeshift Mode function may differ depending on picture quality and the
free space on the hard disk drive.
xx If you press the ▲ or ▼ button, you can see the current channel being on air, or can see the start point the recorded
broadcast.
xx The Timeshift Mode operates for a maximum of 90 minutes.
xx After the Timeshift Mode function has run for the maximum time, the time information will be fixed to “00:00:00.”
Note that if you have paused the recording the TV will automatically resume playback.
xx If the 5% free memory space limit of the USB storage device is reached, the current recording process will be closed.
xx When recording is performed by both the PVR (Personal Video Recorder) function and a device that supports the
HDMI-CEC feature, recording by the PVR function takes precedence.
xx During a playback or the Timeshift Mode, the picture will be displayed according to the display settings of the TV.
xx If you change the input source during recording, the screen will go blank until the change is completed.
xx An application which supports neither the recording nor the Timeshift Mode function will close automatically if you
try to use it during either function.
xx A message may appear in front of the application window indicating that the recording or the Timeshift Mode
function is closed.
xx Timeshift Mode function is not supported for radio channels.
xx The recording and the Timeshift Mode functions are disabled for channels locked with Child Lock.
xx If the USB device has failed the Device Performance Test, the USB device must go through the Device Format and
Device Performance Test again before you record with the Guide or Channel Manager.
xx The recording and Timeshift Mode functions can only be used with a USB storage device that completed the
Device Performance Test.
xx If you attempt the recording or Timeshift Mode function with a device that did not have the Device Performance
Test, the function will not start.
xx If you press � (REC) on the remote control while the Channel Manager screen is being displayed or record with
Timer Recording, the TV may start or stop recording 1 or 2 seconds later than you intended due to the time needed
to process the command.
xx If a USB device dedicated to recording is connected, existing Timeshift Mode or recording files that were saved
abnormally will automatically be deleted.
xx If you switch to external input mode during recording, the recording will continue but the � (REC) button will be
disabled.
xx If any function that turns off the TV (Sleep Timer, Off timer, etc.) is set for a time that conflicts with recording, the TV
will be turned off once the recording is complete.
38
English
[BOOK-UC7000]Web Manual-Eng.indb 38
2010-03-31 오후 1:40:29
04 Advanced Features
Videos
Playing Video
1. Press the ◄ or ► button to select Videos, then press the ENTERE button in the Media Play menu.
2. Press the ◄/►/▲/▼ button to select the desired file in the file list.
3. Press the ENTERE button or � (Play) button.
–– The selected file is displayed on the top with its playing time.
–– If video time information is unknown, play time and progress bar are not displayed.
–– During playing the video, you can search using the ◄ and ► button.
✎✎In this mode, you can enjoy movie clips contained on a Game,
but you cannot play the Game itself.
yy Supported Subtitle Formats
00:04:03 / 00:07:38
1/1
Movie 01.avi
Name
File extension
MPEG-4 time-based text
.ttxt
Format
XML
SAMI
.smi
HTML
SubRip
.srt
string-based
SubViewer
.sub
string-based
Micro DVD
.sub or .txt
string-based
E Chaptering L Jump T Tools R Return
SUM
yy Supported Video Formats
File Extension
*.avi
*.mkv
*.asf
*.wmv
*.mp4
Container
AVI
MKV
ASF
ASF
MP4
*.3gp
3GPP
*.vro
VRO
VOB
*.mpg
*.mpeg
PS
*.ts
*.tp
*.trp
TS
Video Codec
Resolution
Frame rate
(fps)
Bit rate
(Mbps)
Divx 3.11 / 4.x / 5.1 / 6.0
1920x1080
6 ~ 30
8
XviD
1920x1080
6 ~ 30
8
H.264 BP / MP / HP
1920x1080
6 ~ 30
25
MPEG4 SP / ASP
1920x1080
6 ~ 30
8
Motion JPEG
800x600
6 ~ 30
8
Divx 3.11 / 4.x / 5.1 / 6.0
1920x1080
6 ~ 30
8
XviD
1920x1080
6 ~ 30
8
H.264 BP / MP / HP
1920x1080
6 ~ 30
25
MPEG4 SP / ASP
1920x1080
6 ~ 30
8
Motion JPEG
800x600
6 ~ 30
8
Window Media Video v9
1920x1080
6 ~ 30
25
H.264 BP / MP / HP
1920x1080
6 ~ 30
25
MPEG4 SP / ASP
1920x1080
6 ~ 30
8
XVID
1920x1080
6 ~ 30
8
H.264 BP / MP / HP
1920x1080
6 ~ 30
25
MPEG4 SP / ASP
1920x1080
6 ~ 30
8
MPEG1
1920x1080
24 / 25 / 30
30
MPEG2
1920x1080
24 / 25 / 30
30
MPEG1
1920x1080
24 / 25 / 30
30
MPEG2
1920x1080
24 / 25 / 30
30
H.264
1920x1080
6 ~ 30
25
MPEG2
1920x1080
24 / 25 / 30
30
H.264
1920x1080
6 ~ 30
25
VC1
1920x1080
6 ~ 30
25
Audio Codec
MP3 / AC3 / LPCM /
ADPCM / DTS Core
MP3 / AC3 / LPCM /
ADPCM / WMA
WMA
MP3 / ADPCM / AAC
ADPCM / AAC / HE-AAC
AC3 / MPEG / LPCM
AC3 / MPEG / LPCM / AAC
AC3 / AAC / MP3 / DD+ /
HE-AAC
English
[BOOK-UC7000]Web Manual-Eng.indb 39
39
2010-03-31 오후 1:40:30
Advanced Features
Other Restrictions
✎✎ NOTE
xx If there are problems with the contents of a codec, the codec will not be supported.
xx If the information for a Container is incorrect and the file is in error, the Container will not be able to play
correctly.
xx Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec
listed in the table above.
xx If the Index Table is in error, the Seek (Jump) function is not supported.
Video Decoder
Audio Decoder
• Supports up to H.264, Level 4.1
• H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not
supported.
• XVID, MPEG4 SP, ASP :
–– Below 1280 x 720: 60 frame max
–– Above 1280 x 720: 30 frame max
• GMC 2 over is not supported.
• H.263 is not supported.
• Only Samsung Techwin MJPEG is supported.
• Supports up to WMA 7, 8, 9, STD
• WMA 9 PRO does not support 2 channel excess multi channel or
lossless audio.
• WMA sampling rate 22050Hz mono is not supported.
Playing recorded TV or movie file continuously (Resume Play)
If you exit the playing Recorded TV or Videos function, it can be played later from the point where it was stopped.
✎✎If you press the ENTERE button (Chaptering) during playing the file, you can explore scene divided into 5 chapters
you want.
1. Select the movie file you want to play continuously by pressing
the ◄ or ► button to select it from the file list section.
2. Press the � (Play) / ENTERE button.
00:04:03 / 00:07:38
1/1
Movie 01.avi
3. Select Play Continuously (Resume Play) by pressing the Blue
button. The Movie will begin to play from where it was stopped.
✎✎ The Blue button is available when resuming play.
✎✎ If the Continuous Movie Play Help function is set to On
Play continuously
Resumes playing from the last viewed
scene.
in the Settings menu, a pop-up message will appear
when you resume play a movie file.
SUM
40
Play continuously E Chaptering L Jump T Tools R Return
English
[BOOK-UC7000]Web Manual-Eng.indb 40
2010-03-31 오후 1:40:31
Playing Music
1. Press the ◄ or ► button to select Music, then press the
ENTERE button in the Media Play menu.
Playlist
2. Press the ◄/►/▲/▼ button to select the desired file in the file
list.
3. Press the ENTERE button or � (Play) button.
–– During playing the music, you can search using the ◄ and ►
button.
–– � (REW) and µ (FF) buttons do not function during play.
I Love You
Jhon
I Love you
Jhon
1st Album
Pop
2010
4.2MB
No Singer
Music 1
Music 2
No Singer
Music 3
No Singer
01:10 / 04:02
Music 4
No Singer
Music 5
✎✎Only displays the files with MP3 and PCM file extension. Other
file extensions are not displayed, even if they are saved on the
same USB device.
3/15
04 Advanced Features
Music
No Singer
E Pause L Jump T Tools R Return
SUM
✎✎If the sound is strange when playing MP3 files, adjust the Equalizer in the Sound menu. (An over-modulated MP3 file
may cause a sound problem.)
✎✎You can create My Playlist selecting the desired music in the file, and can play My Playlist.
Photos
Viewing a Photo (or Slide Show)
1. Press the ◄ or ► button to select Photos, then press the
ENTERE button in the Media Play menu.
Normal
Image1024.jpg
1024x768
2010/2/1
3/15
2. Press the ◄/►/▲/▼ button to select the desired file in the file
list.
3. Press the ENTERE button or � (Play) button.
–– While a photo list is displayed, press the � (Play) /
ENTERE button on the remote control to start slide show.
–– All files in the file list section will be displayed in the slide show.
–– During the slide show, files are displayed in order from
currently being shown.
✎✎Music files can be automatically played during the Slide Show if
SUM
E Pause L Previous/Next T Tools R Return
the Background Music is set to On.
✎✎The BGM Mode cannot be changed until the BGM has finished
loading.
English
[BOOK-UC7000]Web Manual-Eng.indb 41
41
2010-03-31 오후 1:40:32
Advanced Features
¦¦ Playing the Multiple Files
Playing the selected recorded TV/video/music/photo files
1. Press the Yellow button in the file list to select the desired file.
2. Repeat the above operation to select multiple files.
✎✎ NOTE
Videos
c
/Movie 01.avi
1 files selected 1/1 page
Movie 01
Movie 02
2010/01/10
xx The c mark appears to the left of the selected files.
xx To cancel a selection, press the Yellow button again.
xx To deselect all selected files, press the 간편메뉴 button
2010/01/16
Movie 03
Movie 04
2010/01/12
2010/01/16
Movie 05
2010/01/12
and select Deselect All.
3. Press the 간편메뉴 button and select Play Selected Contents.
SUM
Change Device
Select
Playing the recorded TV/video/music/photo file group
Sorting T Tools
1. While a file list is displayed, move to the any file in desired group.
2. Press the 간편메뉴 button and select Play Current Group.
¦¦ Media Play Additional Function
Sorting the file list
Press the Blue button in the file list to sort the files.
Category
Basic View
Operations
Recorded TV
It shows whole folder. You can view the photo by selecting the folder.
Videos
Music
Photos
>
>
>
>
>
>
>
>
Title
It sorts and displays the file title in Symbol/Number/Alphabet/Special order.
>
Preference
It sorts and displays the file by preference. You can change the file preference
in the file list section using the Green button.
>
>
Latest Date
It sorts and shows files by latest date.
>
>
Earliest Date
It sorts and shows files by earliest date.
>
>
Artist
It sorts the music file by artist in alphabetical.
>
Album
It sorts the music file by album in alphabetical order.
>
Genre
It sorts music files by the genre.
>
Mood
It sorts music files by the mood. You can change the music mood information.
>
Monthly
It sorts and shows photo files by month. It sorts only by month (from January
to December) regardless of year.
>
Channel
It sorts the recorded files by channel name.
>
42
>
>
>
English
[BOOK-UC7000]Web Manual-Eng.indb 42
2010-03-31 오후 1:40:34
During playing a file, press the 간편메뉴 button.
Recorded TV
Videos
Title
Category
You can move the other file directly.
Operations
>
>
Music
Photos
Repeat Mode
You can play recorded TV, movie and music files repeatedly.
>
>
Picture Size
You can adjust the picture size for preference.
>
>
Picture Setting
You can adjust the picture setting (p. 17~23).
>
>
Sound Setting
You can adjust the sound setting (p. 23, 24, 25).
>
>
Subtitle Setting
You can play the video file with Subtitle. This function only works if the
subtitles are the same file name as the video file.
>
>
Audio
You can enjoy video in one of supported languages as required. The function
is only enabled when stream-type files which support multiple audio formats
are played.
>
>
Audio Description
You can adjust the audio description (p. 24).
>
Stop Slide Show /
Start Slide Show
You can start or stop a slide show.
Slide Show Speed
You can select the slide show speed during the slide show.
>
Slide Show Effect
You can set variously the slide show effect.
>
Background Music
You can set and select background music when watching a slide show.
>
Zoom
You can zoom into images in full screen mode.
>
Rotate
You can rotate images in full screen mode.
>
Home Background
You can move the file to the Media Play desktop.
Information
You can see detailed information about the played file.
>
>
>
>
04 Advanced Features
Recorded TV/Videos/Music/Photos Play Option menu
>
>
>
>
>
>
Settings
Using the Setup Menu
■■ Background Setting: Select to display the background you want.
■■ Continuous Movie Play Help (Resume Play) (On / Off): Select to display the help pop-up message for continuous
movie playback.
■■ Get the DivX® VOD registration code: Shows the registration code authorized for the TV. If you connect to the DivX web
site and register the registration code with a personal account, you can download VOD registration file. If you play the VOD
registration using Media Play, the registration is completed.
✎✎ For more information on DivX® VOD, visit “www.DivX.com.”
■■ Get the DivX® VOD deactivation code: When DivX® VOD is not registered, the registration deactivation code is
displayed. If you execute this function when DivX® VOD is registered, the current DivX® VOD registration is deactivated.
■■ Information: Select to view information about the connected device.
English
[BOOK-UC7000]Web Manual-Eng.indb 43
43
2010-03-31 오후 1:40:35
Advanced Features
Anynet+
What is Anynet+? t
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung
TV’s remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your
Samsung device has this feature, check if there is an Anynet+ logo on it.
To connect to a Samsung Home Theater
Anynet+
Device 1
Home Theater
Anynet+ Device
2, 3, 4
TV Rear Panel
Optical Adapter (Supplied)
Optical Cable (Not Supplied)
HDMI Cable (Not Supplied)
HDMI Cable (Not Supplied)
HDMI Cable (Not Supplied)
1. Connect the HDMI 입력 (1(DVI), 2(ARC), 3 or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet+
device using an HDMI cable.
2. Connect the HDMI IN jack of the home theater and the HDMI OUT jack of the corresponding Anynet+ device using an
HDMI cable.
✎✎NOTE
xx Connect the Optical cable between the 디지털 음성출력 (옵티컬) jack on your TV and the Digital Audio Input on the
Home Theater.
xx The ARC function enables digital output of sound using the HDMI 입력 2(ARC) port and can only be operated when
the TV is connected to an audio receiver that supports the ARC function.
xx When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from
the Home Theater’s Front, Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect
the 디지털 음성출력 (옵티컬) jack on the DVD / Satellite Box (i.e. Anynet Device 1 or 2) directly to the Amplifier or Home
Theater, not the TV.
xx You can connect only one Home Theater.
xx You can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support Anynet+ functions.
xx Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.
xx Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
44
English
[BOOK-UC7000]Web Manual-Eng.indb 44
2010-03-31 오후 1:40:35
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet+ Menu
View TV
Device List
(device_name) MENU
(device_name) INFO
Recording: (*recorder)
Stop Recording: (*recorder)
Receiver
Description
Changes Anynet+ mode to TV broadcast mode.
Shows the Anynet+ device list.
Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of
the DVD recorder will appear.
Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the
play menu of the DVD recorder will appear.
Starts recording immediately using the recorder. (This is only available for devices that
support the recording function.)
Stops recording.
Sound is played through the receiver.
04 Advanced Features
Anynet+ Menu
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is
connected, it will be represented as (*device_name).
¦¦ Setting Up Anynet+
OO 메뉴m → Application → Anynet+ (HDMI-CEC) → ENTERE
■■ Setup
Anynet+ (HDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.
✎✎ When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.
Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off.
The active source on the TV must be set to TV to use the Anynet+ function.
✎✎
✎✎ Even if an external device is still recording, it may turn off.
¦¦ Switching between Anynet+ Devices
1. Anynet+ devices connected to the TV are listed.
✎✎ If you cannot find a device you want, press the Red button to refresh the list.
2. Select a device and press the ENTERE button. You can switch to the selected device.
✎✎ The Device List menu will only appear when you set Anynet+ (HDMI-CEC) to On in the Application menu.
xx Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching
operation.
xx If you have selected external input mode by pressing the TV/외부입력 button, you cannot use the Anynet+ function.
Make sure to switch to an Anynet+ device by using the Device List.
English
[BOOK-UC7000]Web Manual-Eng.indb 45
45
2010-03-31 오후 1:40:35
Advanced Features
¦¦ Recording
You can make a recording of a TV Program using a Samsung recorder.
1. Select Recording.
✎✎ When there are more than two recording devices
xx When multiple recording devices are connected, the recording devices are listed. Select one recording device in
the Device List.
✎✎ When the recording device is not displayed, select Device List and press the Red button to search devices.
2. Press the 종료 button to exit.
✎✎ You can record the source streams by selecting Recording: (device_name).
✎✎ Pressing the � (REC) button will record whatever you are currently watching. If you are watching video from
another device, the video from the device is recorded.
✎✎ Before recording, check whether the antenna jack is properly connected to the recording device. To properly
connect an antenna to a recording device, refer to the recording device’s users manual.
¦¦ Listening through a Receiver
You can listen to sound through a receiver (i.e Home Theater) instead of the TV Speaker.
1. Select Receiver and set to On.
2. Press the 종료 button to exit.
✎✎ If your receiver supports audio only, it may not appear in the device list.
✎✎ The receiver will work when you have properly connected the optical in jack of the receiver to the 디지털 음성출력
(옵티컬) jack of the TV.
✎✎ When the receiver (i.e Home Theater) is set to On, you can hear sound output from the TV’s Optical jack. When
the TV is displaying a DTV (air) signal, the TV will send out 5.1 channel sound to the receiver. When the source is a
digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from
the receiver.
✎✎NOTE
xx You can only control Anynet+ devices using the TV remote control, not the buttons on the TV.
xx The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.
xx The Anynet+ functions do not operate with other manufacturers’ products.
Using the ARC function
You can listen to sound through a receiver connected HDMI cable without the need for a separate optical cable.
1. Select Receiver and set to On.
2. Press the 종료 button to exit.
✎✎To use the ARC function, a receiver which supports the HDMI-CEC and ARC features must be connected to the HDMI
입력 2 (ARC) port.
✎✎To disable the ARC function, set the Receiver to Off. Even if the TV transmits the ARC signal continuously, the receiver
will be blocked from receiving the signal.
46
English
[BOOK-UC7000]Web Manual-Eng.indb 46
2010-03-31 오후 1:40:36
Problem
Possible Solution
Anynet+ does not work.
•
•
•
•
•
•
•
•
Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.
Only one receiver (home theater) can be connected.
Check if the Anynet+ device power cord is properly connected.
Check the Anynet+ device’s Video/Audio/HDMI cable connections.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Check whether the TV remote control is in TV mode.
Check whether the remote control is Anynet+ compatible.
Anynet+ doesn’t work in certain situations. (Searching channels, operating Media Play or Plug & Play (initial
setup), etc.)
• When connecting or removing the HDMI cable, please make sure to search devices again or turn your TV off
and on again.
• Check if the Anynet+ Function of Anynet+ device is set on.
I want to start Anynet+.
• Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to
On in the Anynet+ Setup menu.
• Press the 간편메뉴 button to display the Anynet+ menu and select a menu you want.
I want to exit Anynet+.
• Select View TV in the Anynet+ menu.
• Press the TV/외부입력 button on the TV remote control and select a non- Anynet+ device.
• Press > 채널 <, 이전채널, and 선호채널 to change the TV mode. (Note that the channel button
operates only when a tuner-embedded Anynet+ device is not connected.)
The message “Connecting to
Anynet+ device...” appears on the
screen.
• You cannot use the remote control when you are configuring Anynet+ or switching to a view mode.
• Use the remote control when the Anynet+ setting or switching to view mode is complete.
The Anynet+ device does not play.
• You cannot use the play function when Plug & Play (initial setup) is in progress.
The connected device is not
displayed.
•
•
•
•
•
The TV Program cannot be
recorded.
• Check whether the antenna jack on the recording device is properly connected.
The TV sound is not output
through the receiver.
• Connect the optical cable between TV and the receiver.
• The ARC function enables digital output of sound using the HDMI 입력 2(ARC) port and can only be operated
when the TV is connected to an audio receiver that supports the ARC function.
Check whether or not the device supports Anynet+ functions.
Check whether or not the HDMI cable is properly connected.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Search Anynet+ devices again.
You can connect an Anynet+ device using the HDMI cable only. Some HDMI cables may not support Anynet+
functions.
• If connection is terminated because there has been a power interruption or the HDMI cable has been
disconnected, please repeat the device scan.
English
[BOOK-UC7000]Web Manual-Eng.indb 47
04 Advanced Features
¦¦ Troubleshooting for Anynet+
47
2010-03-31 오후 1:40:36
Advanced Features
Internet@TV
¦ Getting Started with Internet@TV
ᯙ░֘
Recommended
Internet@TV brings useful and entertaining
contents and services directly from the web to
your TV.
O
My Applications
by Date 1/1
메뉴m → Application → Content View
→ Internet@TV → ENTERE
Samsung Apps
Settings
Login
B Mark as Favorite
Sort by
R Return
Screen Display
TV Screen:
Displays the current channel.
Recommended
Information:
Displays notices, new
applications, and
advertisements brought to
you by Samsung product
introductions.
My Applications
Recommended Applications:
Displays the recommended service by
Samsung. You are not able to add or
delete a service in this list.
by Date 1/1
Downloaded Applications:
Displays the downloaded applications
through the Samsung Apps.
Application service:
You can experience
various service by provided
samsung.
Samsung Apps
Settings
Login
Internet@TV Settings:
Edit and configure applications
and Internet@TV settings.
B
Mark as Favorite
Sort by
R Return
Controls:
Red (Login): To log in to Internet@TV.
•
• B Green (Mark as Favorite): To mark the applications as a favorite.
•
Blue (Sort by): To sort the applications.
• R Return: To return to the previous menu.
✎
The color buttons may work differently depending on the application.
✎ NOTE
x
Configure the network settings before using Internet@TV. For more information, refer to “Network Connection” (p.
30).
x
x
x
x
x
x
Unsupported fonts within the provider’s content will not display normally.
x
Depending on your country’s regulations, some applications may have limited service or not be supported.
48
Slow responses and/or interruptions may occur, depending on your network conditions.
Depending on the region, English may be the only language supported for application services.
This feature is not available in some locations.
If you experience a problem using a application, please contact the content provider.
According to circumstances of the contents provider, an application’s updates or the application itself may be
discontinued.
English
[BOOK-UC7000]Web Manual-Eng.indb 48
2010-03-31 오후 1:40:37
For an application with multiple accounts, use ◄ and ► to
access the different accounts.
Login
✎✎
✎✎ Depending on your country, Ticker application
admin
User account :
Ticker Autorun (Off / On): You can set Ticker Autorun
to come on when powering on the TV.
The Ticker application provides useful News,
Weather, and Stock Market information. The
Ticker application on Internet@TV must be
downloaded to use this feature.
may have a different service or not be supported.
Password :
Create [0~9] Enter PIN R Cancel
✎✎For a more enjoyable application experience, register
and log in to your account.
✎✎For instructions on creating an account, refer to
Channel Bound Service (Off / On): Some channels
support applications as an Internet data service, allowing
you to access the Internet service while watching TV.
Only available if supported by the broadcaster.
✎✎
Change the Service Lock password
The default password set is “0-0-0-0.”
✎✎
✎✎ If you forget the password you created, press
the following sequence of remote control buttons
to reset the password to “0-0-0-0”: 전원 (off) →
MUTE → 8 → 2 → 4 → 전원 (on).
Settings → Internet@TV ID → Create.
1. Press the Red button in the Internet@TV home page.
2. Select the desired User account, then press the
ENTERE button.
✎✎ If you want to create an account, press the Red
button; then the create account OSD window will
appear.
3. After selecting User account, enter the Password using
the number button on the remote control.
✎✎ When login succeeds, User account will be
displayed on the screen.
¦¦ Setting up Internet@TV
04 Advanced Features
■■ System Setup
Account Login
Reset: Resets Internet@TV settings to factory default
settings.
■■ Internet@TV ID
You can use this menu when creating and deleting
the account. You can control your account including
contents site’s account information.
Create: Create an account and link it with desired
service applications.
NOTE
✎✎
xx Maximum number of accounts is 10.
xx Maximum number of characters is 8.
Settings
Create IDs and configure Internet@TV settings from this
screen. Highlight Settings using the ▲ and ▼ buttons and
press the ENTERE button.
Settings
▪ System Setup
▪ Internet@TV ID
▪ Service Manager
▪ Properties
▪ Ticker Autorun
: Off
▪ Channel Bound Service
: Off
▪ Change the Service Lock password
▪ Reset
R Return
English
[BOOK-UC7000]Web Manual-Eng.indb 49
49
2010-03-31 오후 1:40:38
Advanced Features
How to create Internet@TV ID
Before creating a User account, you should download
the application first on the Samsung Apps.
1. Using the ▲/▼/◄/► button, select Settings. Then
press the ENTERE button.
2. Press the ▼ button to select Internet@TV ID, then
press the ENTERE or ► button.
3. Select Create. The Keypad screen will appear.
4. The keypad OSD will be displayed on the screen.
Using the Keypad
Pressing the – button on the remote while you are
using the Screen Keypad enables you to change the
text fields to lower case, upper case, numbers and
icons.
You can use this Screen Keypad in a several Internet@
TV applications.
Here is how to input characters.
4-1. For example, suppose that you want to input
“105Chang”.
4-2. Press the – button on the remote twice to
change the input mode from lower case to
numbers.
4-3. Press the 1, 0 and 5 button in numerical order.
4-4. Press the – button on the remote 3 times to
change the input mode from numbers to upper
case.
4-5. Press the 2 button on the remote 3 times to
input C.
4-6. Press the – button on the remote 3 times to
change the input mode from upper case to
lower case.
4-7. Press buttons on the remote to input the rest
of “Chang”. When done, press the ENTERE
button.
50
5. Using the number buttons, enter the User account
and Password.
xx Password must be numbers only.
xx You can delete the entered character using the
PRE-CH button.
xx Using the � (REW) or μ (FF) button, you
can select icon you want to enter in icon keypad
screen.
6. Account created. You can use the services provided
by all users of your Samsung TV with a single
login by linking the users’ account to the TV ID. If
you want to register a service site ID, select Yes.
Service Site list will appear on the screen.
7. Select Register of the Service Site you want, then
press the ENTERE button.
8. Using number buttons, enter your application site ID
and password. Then press the ENTERE button.
9. Registered successfully. If you add another service
site, select Yes. then press the ENTERE button,
go to step 5.
10. When completed, select OK. Then press the
ENTERE button.
Manager
–– Service Site: Register login information for service
sites.
–– Change Password: Change account password.
–– Delete: Delete the account.
■■ Service Manager: Delete and lock applications installed
to Internet@TV.
Lock: Lock the application.
✎✎ Accessing a locked application requires the
password.
Delete: Delete the application.
■■ Properties: Display information about Internet@TV. Use
the Check the speed of your internet connection
option to test your network connection.
English
[BOOK-UC7000]Web Manual-Eng.indb 50
2010-03-31 오후 1:40:38
Using the Samsung Apps by category
Samsung Apps
Samsung Apps is a store for downloading applications to be
used on Samsung TV/AV equipment.
Users can enjoy a variety of contents such as videos, music,
photos, games, useful information etc. using the downloaded
applications.
Additional applications will be available in the future.
Samsung Apps
What’s New?
Video
Sports
Featured
You Tube
Most downloaded
Most recent
Name
YouTube
Free
TV store Test User002
Game
Lifestyle
Information
The following categories are available:
yy What’s New?: Displays newly registered applications.
yy Video: Displays various video media such as movies, TV
shows and short length videos.
yy Sports: Displays various sports media such as match
information, images and short length video.
yy Game: Displays various games such as sudoku and
chess.
yy Lifestyle: Includes various lifestyle media services such
as music, personal photo management tools and social
networking such as Facebook and Twitter.
yy Information: Includes various information services such
as news, stocks and weather.
yy Other: Includes other miscellaneous services.
yy My Page: Displays the application list and your cyber
cash balance.
Starting in the middle of 2010 (US and Korea
only), you can purchase cyber-cash for buying
applications through tv.samsung.com.
04 Advanced Features
¦¦ Using the Internet@TV service
✎✎
Other
My Page
Help
Login
B Thumbnail View
Sort by
R Return
✎✎Using the color buttons with the Samsung Apps.
yy Help: If you have questions about Internet@TV, check
this section first.
xx Red (Login): To log in to the internet service.
xx B Green (Thumbnail View): To change the view
mode.
xx
Blue (Sort by): To sort the applications by
Featured, Most downloaded, Most recent or
Name.
xx R Return: Moves to previous menu.
English
[BOOK-UC7000]Web Manual-Eng.indb 51
51
2010-03-31 오후 1:40:39
Advanced Features
AllShare
Message / Media / ScreenShare
OO 메뉴m → Application → Content View → AllShare
→ ENTERE
Shows a list of mobile phones or connected devices which
have been set up with this TV for using the Message,
Media, or ScreenShare function.
✎✎The Media function is available in all mobile devices
¦¦ About AllShare
which support AllShare.
AllShare connects your TV and compatible Samsung mobile
phones/ devices through a network. On your TV, you can
view call arrivals, SMS messages and schedules set on your
mobile phones. In addition, you can play media contents
including videos, photos and music saved on your mobile
phones or the other devices (such as your PC) by controlling
them on the TV via the network. Additionally, you can use
your TV for browsing web pages in your mobile phones.
✎✎For more information, visit “www.samsung.com” or
contact the Samsung call center. Mobile devices may
need additional software installation. For details, refer to
each device’s user’s guide.
■■ Allowed / Denied: Allows/Blocks the mobile phone.
■■ Delete: Deletes the mobile phone from the list.
✎✎ This function only deletes the name of the mobile
from the list. If the deleted mobile device is turned
on or trys to connect to the TV, it may appear on
the list again.
Using the Message Function
Using this function, you view call arrivals, SMS messages
and schedules set on the mobile phone through the alarm
window while watching TV.
✎✎NOTE
xx To disable the alarm window, set Message to Off in
¦¦ Setting Up AllShare
Setup of AllShare.
xx If OK is selected, or if OK is not selected after the
Setup
■■ Message (On / Off): Enables or disables the message
function (for call arrivals, SMS messages and schedules
set on your mobile phones).
■■ Media (On / Off): Enables or disables the media
function. When the media function is on, it plays videos,
photos and music from a mobile phone or other device
that supports AllShare.
■■ ScreenShare (On / Off): Enables or disables the
ScreenShare function for using mobile phone as a
remote control.
■■ TV name: Sets the TV name so you can find it easily on
a mobile device.
✎✎ If you select User Input, you can type on the TV
using the OSK (On Screen Keyboard).
AllShare™
3/7
Setup
Message
: On
Message
Media
: On
Media
ScreenShare
: On
ScreenShare
TV name
: Home TV
message has appeared three times, the message
will be deleted. The message is not deleted from the
mobile phone.
xx The alarm window can be displayed while using
some applications such as Media Play etc. To view
the contents of a message, switch to TV viewing
mode.
xx When a message from an unknown mobile phone is
displayed, select the mobile phone on the message
menu in AllShare and select Denied to block the
phone.
Message View
If a new SMS message arrives while you are watching
TV, the alarm window appears. If you click the OK
button, the contents of the message are displayed.
You can configure the viewing settings for SMS
messages on your mobile phones. For the
procedures, refer to the mobile phone manual.
✎✎
✎✎ Some types of characters may be displayed as
blank or broken characters.
E Select R Return e Exit
Setup R Return
52
English
[BOOK-UC7000]Web Manual-Eng.indb 52
2010-03-31 오후 1:40:39
Using ScreenShare Function
If a call arrives while you are watching TV, the alarm
window appears.
Using ScreenShare, you can browse various web contents
provided by the mobile phone. For example, the image
below displays an access page for contents on a mobile.
You can read the mobile’s files and view the phone book and
calendar on the TV. Also, in the phone book, you can make a
call to another person, or send to SMS.
Schedule Alarm
While you are watching TV, the alarm window appears to
display the registered event.
You can configure viewing settings for schedule
contents on your mobile phones. For the
procedures, refer to the mobile phone manual.
✎✎
✎✎ Some special characters may be displayed as
blank or broken characters.
✎✎NOTE
xx You must have ScreenShare installed on your
Samsung Mobile phone/device to use this feature.
04 Advanced Features
Call Arrival Alarm
xx Doc Viewer can read files in doc format, but cannot
modify them.
xx The screen display may differ depending on the
Using the Media Function
An alarm window appears informing the user that the media
contents (videos, photos, music) sent from a mobile phone
will be displayed on your TV. The contents are played
automatically 3 seconds after the alarm window appears. If
you press the 복귀 or 종료 button when the alarm window
appears, the media contents are not played.
connected device.
My Mobile
✎✎NOTE
xx If the media function executes for the first time,
the warning popup window appears. Press the
ENTERE button to select Allow, then you can use
Media function on that device.
“Unknown Device 0” is requesting that the media file be allowed to play.
If you wish to allow the media file to be played at your device, please press
“Allow”, otherwise press “Deny”.
You can also change the setting (or resetting) of this feature at “AllShare
Setup”.
Warning: Please note that if your device is connected to unsecured or
unfamiliar network, unwanted or inappropriate contents might be played.
If you are not sure about the network's identity or content’s appropriateness,
we strongly recommend that you do not “Allow” the request to play.
Allow
Deny
Contacts
Calendar
Doc Viewer
E Select
Return
Using your Samsung phone to control your TV Simply
Before you can use this feature, you must connect to
a Samsung mobile phone that supports ScreenShare
functions. When operating the TV with your mobile phone,
only the 전원, - 음량 +, > 채널 < and 조용히 buttons
are supported.
✎✎Even if you keep pressing down on a control button
(channel or volume) on the mobile phone, the value will
only go up or down by one unit.
xx To turn off the media contents transmission from
the mobile phone, set Media to Off in the AllShare
setup.
xx Contents may not be played on your TV depending
on their resolution and format.
xx The ENTERE and ◄ / ► buttons may not work
depending on the type of media content.
xx Using the mobile device, you can control the media
playing. For details, refer to each mobile’s user’s
guide.
xx When you want to play media contents from
your PC, select the PC icon on the main display
of AllShare. Then the TV’s Media Play menu
automatically changes. For more detail information,
refer to “Media Play” (p. 37).
English
[BOOK-UC7000]Web Manual-Eng.indb 53
53
2010-03-31 오후 1:40:40
Other Information
Assembling the Cables
Stand Type
Enclose the cables in the Cable Tie so that the cables are not visible through the transparent stand.
1
1
2
2
3
3
Wall-Mount Type
✎✎Do not pull the cables too hard when arranging them. This may cause damage to the product’s connection terminals.
54
English
[BOOK-UC7000]Web Manual-Eng.indb 54
2010-03-31 오후 1:40:41
05 Other Information
Installing the Wall Mount
Attaching the Blanking Bracket
When installing the TV onto a wall, attach the Blanking Bracket as shown.
Blanking Bracket
Preparing before installing Wall-Mount
To install a wall-mount from another manufacturer, use the Holder-Ring.
Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the TV on the wall.
For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a technician for
assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage to the product or
injury to yourself or others if you elect to install the TV on your own.
Wall Mount Kit Specifications (VESA)
✎✎
The wall mount kit is not supplied, but sold separately.
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact
your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
✎✎NOTE
xx Standard dimensions for wall mount kits are shown in the table below.
xx When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.
xx Do not use screws that do not comply with the VESA standard screw specifications.
xx Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw
specifications. Screws that are too long may cause damage to the inside of the TV set.
xx For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ
depending on the wall mount specifications.
xx Do not fasten the screws too strongly; this may damage the product or cause the product to fall, leading to personal
injury. Samsung is not liable for these kinds of accidents.
xx Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or
the consumer fails to follow the product installation instructions.
xx Do not mount the TV at more than a 15 degree tilt.
xx Always use two people to mount the TV to a wall.
English
[BOOK-UC7000]Web Manual-Eng.indb 55
55
2010-03-31 오후 1:40:42
Other Information
Product Family
LED-TV
[Ultra-Slim]
inches
VESA Spec. (A * B)
Standard Screw
19~22
75 X 75
M4
23~29
200 X 100
32~37
200 X 200
40~55
400 X 400
56~65
600 X 400
Quantity
M8
4
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to
electric shock.
Anti-theft Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device used to
physically fix the system when using it in a public place. The appearance and
locking method may differ from the illustration depending on the manufacturer.
Refer to the manual provided with the Kensington Lock for additional
information on proper use.
<TV Rear>
1
✎✎Please find a “K” icon on the rear of the TV. A kensington slot is beside
the “K” icon.
To lock the product, follow these steps:
1. Wrap the Kensington lock cable around a large, stationary object such as
desk or chair.
<Optional>
2. Slide the end of the cable with the lock attached through the looped end
of the Kensington lock cable.
3. Insert the locking device into the Kensington slot on the product. (1)
4. Lock the lock.
✎✎These are general instructions. For exact instructions, see the User manual supplied with the locking device.
✎✎The locking device has to be purchased separately.
✎✎The location of the Kensington slot may be different depending on the TV model.
56
English
[BOOK-UC7000]Web Manual-Eng.indb 56
2010-03-31 오후 1:40:43
Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children
do not hang over or destabilize the TV; doing so may cause the TV to tip over, causing serious injuries or
death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install the
anti-fall device for safety purposes, as follows.
¦¦ To Avoid the TV from Falling
05 Other Information
Securing the TV to the Wall
1. Put the screws into the clamps and firmly fasten them onto the wall.
Confirm that the screws have been firmly installed onto the wall.
✎✎ You may need additional material such as an anchor depending on
the type of wall.
✎✎ Since the necessary clamps, screws, and string are not supplied,
please purchase these additionally.
2. Remove the screws from the back centre of the TV, put the screws into
the clamps, and then fasten the screws onto the TV again.
✎✎ Screws may not be supplied with the product. In this case, please
purchase the screws of the following specifications.
✎✎ Screw Specifications
xx For a 19 ~ 22 inch : M4
xx For a 23 ~ 65 inch : M8
3. Connect the clamps fixed onto the TV and the clamps fixed onto the wall
with a strong cable and then tie the string tightly.
✎✎ NOTE
xx Install the TV near to the wall so that it does not fall backwards.
xx It is safe to connect the string so that the clamps fixed on the
Wall
wall are equal to or lower than the clamps fixed on the TV.
xx Untie the cable before moving the TV.
4. Verify all connections are properly secured. Periodically check
connections for any sign of fatigue for failure. If you have any doubt about
the security of your connections, contact a professional installer.
English
[BOOK-UC7000]Web Manual-Eng.indb 57
57
2010-03-31 오후 1:40:43
Other Information
Troubleshooting
If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips
apply, visit “www.samsung.com,” then click on Support, or call Samsung customer service at 1-800-SAMSUNG.
Issues
Solutions and Explanations
Poor picture
First of all, please perform the Picture Test and confirm that your TV is properly displaying the test image.
(go to 메뉴 - Support - Self Diagnosis - Picture Test) (p. 28)
If the test image is properly displayed, the poor picture may be caused by the source or signal.
The TV image does not look as good as it
did in the store.
• If you have an analog cable/satellite box, upgrade to an HD digital set top box. Use HDMI or
Component cables to deliver HD (high definition) picture quality.
• Cable/Satellite subscribers: Try HD stations from the channel line up.
• Antenna connection: Try HD stations after performing Auto program.
✎✎ Many HD channels are up scaled from SD(Standard Definition) contents.
• Adjust the Cable/Sat box video output resolution to 1080i or 720p.
The picture is distorted: macro block error,
small block, dots, pixelization.
• Compression of video contents may cause picture distortion, especially in fast moving pictures such
as sports and action movies.
• Low signal level can cause picture distortion. This is not a TV problem.
• Mobile phones used close to the TV (cca up to 1m) may cause noise in picture on analog and digital
TV.
Color is wrong or missing.
• If you’re using Component connection, make sure the component cables are connected to the
correct jacks. Incorrect or loose connections may cause color problems or a blank screen.
There is poor color or brightness.
• Adjust the Picture options in the TV menu (go to Picture mode / Color / Brightness / Sharpness)
(p. 16)
• Adjust Energy Saving option in the TV menu (go to 메뉴 – Picture – Eco Solution – Energy Saving)
(p. 16)
• Try resetting the picture to view the default picture settings (go to 메뉴 - Picture - Picture Reset) (p.
22)
There is a dotted line on the edge of the
screen.
• If the picture size is set to Screen Fit, change it to 16:9 (p. 18).
• Change cable/satellite box resolution.
The picture is black and white.
• If you are using an AV composite input, connect the video cable (yellow) to the Green jack of
component input 1 on the TV.
When changing channels, the picture
freezes or is distorted or delayed.
• If connected to a cable box, please try to reset it. (reconnect the AC cord and wait until the cable box
reboots. It may take up to 20 minutes)
• Set the output resolution of the cable box to 1080i or 720p.
Sound Problem
First of all, please perform the Sound Test to confirm that your TV audio is properly operating.
(go to 메뉴 - Support - Self Diagnosis - Sound Test) (p. 28)
If the audio is OK, the sound problem may caused by the source or signal.
There is no sound or the sound is too low
at maximum volume.
• Please check the volume of the device (Cable/Sat Box, DVD, Blu-ray etc) connected to your TV.
The picture is good but there is no sound.
• Set the Speaker Select option to TV Speaker in the Sound menu (p. 23).
• If you are using an external device, make sure the audio cables are connected to the correct audio
input jacks on the TV.
• If you are using an external device, check the device’s audio output option (ex. you may need to
change your cable box’s audio option to HDMI when you have a HDMI connected to your TV).
• If you are using a DVI to HDMI cable, a separate audio cable is required.
• If your TV has a headphone jack, make sure there is nothing plugged into it.
• Reboot the connected device by reconnecting the device’s power cable.
The speakers are making an inappropriate
noise.
• Check cable connections. Make sure a video cable is not connected to an audio input.
• For antenna or Cable connections, check the signal strength. Low signal level may cause sound
distortion.
• Perform the Sound Test as explained above.
58
English
[BOOK-UC7000]Web Manual-Eng.indb 58
2010-03-31 오후 1:40:44
Solutions and Explanations
No Picture, No Video
The TV won’t turn on.
• Make sure the AC power cord is securely plugged in to the wall outlet and the TV.
• Make sure the wall outlet is working.
• Try pressing the 전원 button on the TV to make sure the problem is not the remote. If the TV turns on,
refer to “Remote control does not work” below.
The TV turns off automatically.
•
•
•
•
There is no picture/video.
• Check cable connections (remove and reconnect all cables connected to the TV and external
devices).
• Set your external device’s (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections
to the TV input. For example, if an external device’s output is HDMI, it should be connected to an
HDMI input on the TV.
• Make sure your connected devices are powered on.
• Be sure to select the TV’s correct source by pressing the TV/외부입력 button on the remote control.
• Reboot the connected device by reconnecting the device’s power cable.
Ensure the Sleep Timer is set to Off in the Setup menu (p. 24).
If your PC is connected to the TV, check your PC power settings.
Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
When watching TV from an antenna or cable connection, the TV will turn off after 10 - 15 minutes if
there is no signal.
05 Other Information
Issues
RF(Cable/Antenna) Connection
The TV is not receiving all channels.
• Make sure the coaxial cable is connected securely.
• Please try Auto Program to add available channels to the channel list. Go to 메뉴 - Channel - Auto
Program then select Auto and make sure the correct Cable TV signal type is set in the menu. There
are 3 options (STD, HRC and IRC) (p. 14)
• Verify the Antenna is positioned correctly.
No Caption on digital channels.
• Check Caption Setup menu. Try changing Caption Mode Service1 to CC1 (p. 26).
• Some channels may not have caption data.
The picture is distorted: macro block error,
small block, dots, pixelization.
• Compression of video contents may cause picture distortion, especially with fast moving pictures
such as sports and action movies.
• A low signal can cause picture distortion. This is not a TV problem.
PC Connection
A “Mode Not Supported” message
appears.
• Set your PC’s output resolution so it matches the resolutions supported by the TV (p. 12).
“PC” is always shown on the source list,
even if a PC is not connected.
• This is normal; “PC” is always shown on the source list, regardless of whether a PC is connected.
The video is OK but there is no audio.
• If you are using an HDMI connection, check the audio output setting on your PC.
Network Connection
The wireless network connection failed.
• The Samsung Wireless USB dongle is required to use a wireless network.
• Make sure the Network Connection is set to Wireless (p. 32).
• Make sure the TV is connected to a wireless IP sharer (router).
Software Upgrade over the network fails.
• Try network test in Setup menu (p. 27).
• If you have latest SW version, SW upgrade will not proceed.
Others
Purple/green rolling horizontal bars and
buzzing noise from the TV speakers with
Component cable connection.
• Remove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates
that the set-top-box has a grounding issue. Replace the Component video cables with an HDMI
connection.
The picture won’t display in full screen.
• HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3)
contents.
• Black bars on the Top & Bottom will be shown on movies that have aspect ratios different from your
TV.
• Adjust the picture size options on your external device or TV to full screen.
The remote control does not work.
• Replace the remote control batteries with the poles (+/–) in the right direction.
• Clean the sensor’s transmission window on the remote.
• Try pointing the remote directly at the TV from 5~6 feet away.
The cable/set top box remote control
doesn’t turn the TV on or off, or adjust the
volume.
• Program the Cable/Set remote control to operate the TV. Refer to the Cable/Set user manual for the
SAMSUNG TV code.
English
[BOOK-UC7000]Web Manual-Eng.indb 59
59
2010-03-31 오후 1:40:44
Other Information
Issues
Solutions and Explanations
A “Mode Not Supported” message
appears.
• Check the supported resolution of the TV, and adjust the external device’s output resolution
accordingly. Refer to the resolution settings on page 12 of this manual.
Caption on TV menu is greyed out.
• Caption can not be selected in the TV menu when connected via HDMI or Component (p. 26).
• Caption must be activated on the external device (p. 26).
There is a plastic smell from the TV.
• This smell is normal and will dissipate over time.
The TV Signal Information is unavailable
in the Self Diagnostic Test menu.
• This function is only available with digital channels from an Antenna / RF/Coax connection (p. 28).
The TV is tilted to the side.
• Remove the base stand from the TV and reassemble it.
The channel menu is greyed out
(unavailable).
• The Channel menu is only available when the TV source is selected.
Your settings are lost after 30 minutes or
every time the TV is turned off.
• If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Change
the settings from Store Demo mode to Home Use mode in the Plug & Play procedure. Press the
TV/외부입력 button to select TV mode, and go to 메뉴 → Setup → Plug & Play → ENTERE (p. 8).
You have intermittent loss of audio or
video.
• Check the cable connections and reconnect them.
• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are
flexible enough for long term use. If mounting the TV to a wall, we recommend using cables with 90
degree connectors.
You see small particles when you look
closely at the edge of the frame of the TV.
• This is part of the product’s design and is not a defect.
The PIP menu is not available.
• PIP functionality is only available when you are using a HDMI, PC or Component source.
POP (TV’s internal banner ad) appears on
the screen.
• Select Home Use under Plug & Play mode. For details, refer to Plug & Play Feature (p. 8).
✎✎This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However,
there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the
product.
60
English
[BOOK-UC7000]Web Manual-Eng.indb 60
2010-03-31 오후 1:40:44
05 Other Information
License
TheaterSound, SRS and the
symbol are trademarks of SRS Labs, Inc.
TheaterSound technology is incorporated under license form SRS Lab, Inc.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are
registered trademarks. & DTS 2.0+ Digital Out and the DTS logos are trademarks of DTS, Inc.
Product Includes software. © DTS, Inc. All Rights Reserved.
DivX Certified to play DivX video up to HD 1080p, including premium content.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.
com for more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play DivX Video-on-Demand (VOD) content.
To generate the registration code, locate the DivX VOD section in the device setup menu.
Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD. Pat. 7,295,673; 7,460,688; 7,519,274
Open Source License Notice
In the case of using open source software, Open Source Licenses are available on the product menu.
Open Source Licence Notice is written only English.
Specifications
Panel native
1920 x 1080 @ 60 Hz
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
50°F to 104°F (10°C to 40°C)
10% to 80%, non-condensing
-4°F to 113°F (-20°C to 45°C)
5% to 95%, non-condensing
Stand Swivel (Left / Right)
-20˚ ~ 20˚
Model Name
UN46C7000
UN55C7000
Screen Size
(Diagonal)
46 inches
55 inches
Sound
(Output)
10 W X 2
15 W X 2
Dimensions (WxDxH)
Body
1092.3 X 26.5 X 653.2 mm
1283.4 X 26.5 X 762.3 mm
With stand
1092.3 X 302.9 X 724.3 mm
1283.4 X 302.2 X 833.4 mm
16.8 kg
19.1 kg
22.2 kg
24.5 kg
Weight
Without Stand
With Stand
✎✎Design and specifications are subject to change without prior notice.
✎✎This device is a Class B digital apparatus.
✎✎For information about power supply, and more about power consumption, refer to the label attached to the product.
English
[BOOK-UC7000]Web Manual-Eng.indb 61
61
2010-03-31 오후 1:40:45
Other Information
Index
A
F
AllShare
Amplify
Antenna
Anynet+
AUDIO OUT Auto Adjustment
Auto Volume
55
22
14
44
11
22
23
7, 14
14
19
16
17
12
H
B
Background Music
Balance L/R
Basic View
Batteries
Black Tone
Blanking Bracket Brightness
43
22
42
7
17
58
16
C
Cable Tie 4, 57
Change PIN
26
Channel Menu
14
Clock
24
Color Tone
18
Component
10
Connecting to a PC
12
Connecting to an Audio Device 11
D
HDMI
Home Theater
I
Installation Space
Internet@TV 2
48
L
Language
License
26
64
M
Media Play
Melody
Menu Transparency
Mono
Music
11, 44
43
12
16
17
E
Eco Sensor
Edit Name
Editing Channels Energy Saving
Equalizer
External Speaker
16
13
15
16
22
23
Navigate
Network Connection
Network Setup
37
27
27
23
41
13
30
31
O
ON/OFF button
Optimal resolution
7
12
46
46
7
43
17
43
Select All
Self Diagnosis
Sharpness
Signal Information
Sleep Timer
Slide Show
Software Upgrade
Source List
Speaker Select
Specifications
Standby mode
Symbol
16
28
16
28
24
42
29
13
23
64
6
3
T
Timer
Title
Tools
Troubleshooting
TV Speaker
24
42
3
61
23
U
USB Drive
29, 37
V
Video Formats
Videos
Volume
40
39
6
W
P
Password
Photos
Picture Size
PIP (Picture in Picture)
Plug & Play
Power Indicator
Receiver
Recording
Remote Control
Repeat Mode
RGB Only Mode
Rotate
S
9, 44
11, 44
N
DIGITAL AUDIO OUT
DivX® VOD
D-sub
Dynamic
Dynamic Contrast
62
FAV.CH button
Favorite Channel
Film Mode
Fine Tune
Flesh Tone
Frequency
R
49
42
18, 43
28
8
6
Wall Mount
Warm
White Balance
Widget
58
18
17
53
English
[BOOK-UC7000]Web Manual-Eng.indb 62
2010-03-31 오후 1:40:46
This page is intentionally
left blank.
[BOOK-UC7000]Web Manual-Eng.indb 63
2010-03-31 오후 1:40:46
Download PDF

advertising