简体中文
镜头
使用说明书
SAMSUNG 60mm F2.8 Macro ED OIS SSA
此说明书专门为指导您了解镜头基本功能和特征而设计。
为保证安全、正确地使用,请仔细阅读此说明书。
AD68-08126A (1.5)
A
1
2
3
4
5
7 8
使用本产品前
使用 i-Function
感谢您购买 Samsung 镜头。根据相机型号不同,此说明书中描
述的一些功能可能不可用。更新相机机身和镜头的固件。请访问
www.samsung.com 以下载固件。
按下镜头上的 i-Function 按钮时,可以使用 E 模式或
Z,或者调整某些拍摄选项。在 E 模式中,可以
选择相机支持的场景或滤镜效果。相对于数码变焦,Z 在
放大时照片画质损失更少。只有当您的相机支持此功能时可用。
i-Scene 模式仅适用于部分相机型号。
拆开包装
镜头、镜头盖、镜头接口盖、遮光罩、镜头包、使用说明书
•另购项目:滤光镜
各部位名称(见图 A)
1 镜头连接指示 2 i-Function 圈 3 对焦圈
4 镜头盖接口指示 5 镜头 6 FULL/LIMIT 开关
7 i-Function 按钮 8 镜头信息触点
连接和移除镜头
► 要安装镜头,
6
1卸下镜头盖、镜头接口盖和机身盖。
2将相机机身红色标记对准镜头红色标记。然后如图
所示旋转镜头,直到其锁定到位。(见图 B)
► 要
卸下镜头,按住镜头释放按钮,然后如图所示旋转镜头。
(见图 C)
B
E
设置对焦距离(见图 D)
使用镜头上的 FULL/LIMIT 开关设置对焦距离。
•FULL: 自动设置对焦距离。(18.7 cm-无限远)
•LIMIT: 对焦于距离相机 40 cm-无限远的拍摄对象。
使用相机上的距离标尺功能在相机显示屏上显示拍摄
对象和相机的距离。有关更多详细信息,请参阅相机手
册。
设置对焦方式
C
在相机上设置对焦模式。
F
D
使用全时手动对焦:如果在相机上设置了自动对焦模式,可同时
使用自动对焦和手动对焦来更加精确地调整对焦。
相机在使用自动对焦 (AF) 时请勿对镜头前端太过用
力。否则可能会导致镜头故障。
使用手动对焦:如果设置了手动对焦,则只可通过旋转对焦环来
手动调整对焦。
设定 MF 辅助功能以协助手动对焦。有关更多详细信
息,请参阅相机说明书。
规格
1将模式旋钮旋转到 P、A、S、M 或 i。
2按镜头上的 [i-Function] 选择一个设置。
•可用设置可能因拍摄模式不同而异。
拍摄模式
设置
E
i
设置
光圈值
P、A、S、M、i 曝光值
白平
S、M
快门速度
衡,ISO
Z
拍摄模式
A、M
P、A、S
P、A、S、M
3旋转镜头上的 i-Function 环以调整设置(或在 Z
模式中更改变焦率)。
4对焦并拍摄相片。
•若想选择在您按下镜头上的 i-Function 按钮时显示的
项目,可使用相机上的 iFn 自定义菜单。
•E 模式中的可用场景或滤镜效果可能会因相机
型号不同而异。
•如果选择 Z,照片的分辨率将根据变焦率而有所
不同。
使用镜头遮光罩(见图 E)
若要避免影像画质因不必要的光线遮挡而变差,请使用镜头罩。
在拍摄对象与相机之间距离较近的情况下使用闪光灯,
闪光灯光线可能会被镜头或镜头遮光罩部分遮挡。为确
保获得适当的光照,请卸下镜头遮光罩或调整相机和拍
摄对象之间的距离。
使用滤光镜(另购)(见图 F)
将滤光镜连接在镜头上之前,请确保滤光镜与镜头兼容。关于兼
容的滤光镜尺寸,请参考“规格”。
•滤光镜是精密的光学设备,注意避免灰尘、污垢和划
伤。 不要将两个或两个以上滤光镜同时安装在镜头
上,否则会损坏图像的质量并造成光晕(镜头的视角被
遮挡造成的图像边缘亮度或饱和度损失)。
•如果使用广角镜头和较厚的滤光镜,影像可能会发暗。
镜头名称
焦距
相当于 35 mm 的焦距
镜头结构-元件
镜头结构-组
非球面元件
ED 元件
查看角度
光圈叶片数
最小焦距(广角)
光圈叶片数
最小焦距
最大放大倍率
镜头遮光罩
光学图像稳定
接口类型
滤光片尺寸
最大直径
长度
重量(仅限镜头,近似值)
操作温度
操作湿度
SAMSUNG 60mm F2.8 Macro ED
OIS SSA
60 mm
92.4 mm
12
9
1
1
26.4°
F2.8
F32
7
0.187 m
1X
附带
是
三星 NX 接口
52 mm
73.5 mm
84 mm
373 g
0–40 °C
5–85%
健康与安全信息
使用镜头前请仔细阅读下列安全注意事项。
•不要通过镜头或相机看太阳。否则可能会严重损伤您的
眼睛。
警告 •使您的镜头或相机远离儿童和宠物。
•不要在未安装镜头盖的情况下,将镜头放在阳光直射的
地方。直射的阳光通过镜头后聚焦在易燃物上可能导致
火灾。
注意 •请仅使用坚固的三脚架。轻型或不稳定的三脚架可能会
倒塌并损坏相机。
镜头的存储和维护
•请在干燥、通风的地方存放镜头。
•请勿将镜头存放在温度或湿度过高的区域,或者放置于壁橱、
车辆或存放化学品的密闭区域。
•镜头没有防水功能,在水附近使用时,小心不要弄湿镜头。
•不要使用任何化学药品如稀释剂、酒精或苯擦镜头的灰尘。
•镜头是精密光学设备,小心不要掉落或受到其他物体的撞击。
•避免在温度频繁变化的地方使用镜头,将镜头放在塑料袋或相
机包,防止镜头内外会产生水珠。
•携带或不使用镜头时,请在镜头上装上镜头盖或镜头接口盖,
以免镜头被异物污染或被划伤。
•不要把没带镜头盖的相机放在三脚架上,相机内部零件可能被
直射的阳光损坏。
•为保持镜头性能,每一年或两年检查一次。
•不要对镜头前面施加外力。
•为了安全地使用镜头,请在电源关闭的状态下安装或拆卸镜
头。
•对于使用其他公司镜头造成的任何损坏,三星不承担任何责
任。
•在安装镜头时,确保仅在清洁的环境更换镜头并且不要将手指
伸到镜头接口中。如果有异物进入相机机身或镜头,可能会影
响拍摄效果或导致故障。
产品中有害物质的名称及其含量
有害物质
部件名称
铅
汞
镉 六价铬 多溴联苯 多溴二苯醚
(Pb) (Hg) (Cd) (Cr6+) (PBB)
(PBDE)
镜头/LENS ×
○
○
○
○
○
本表格依据 SJ/T 11364 的规定编制
○: 表示该有害物质在该部件所有均质材料中的含量均在
GB/T 26572 规定的限量要求以下。
×: 表示该有害物质至少在该部件的某一均质材料中的含量超
出 GB/T 26572 规定的限量要求。
□ 产品名: 镜头(Lens)
□ 环保使用期限:10年
- 只有按照本产品使用说明书中的方法正常使用
时,环保使用期限才能有效
中国制造 天津三星光电子有限公司
中国 天津津港公路微电子工业区张衡道9号
保留备用
A
B
English
1
2
3
4
5
7 8
Before Using This Device
Thank you for purchasing the Samsung Lens. Some functions
described in this manual may not be available depending on the
camera model. Update the firmware of the camera body and
lens. Visit www.samsung.com to download the firmware.
6
Unpacking
Lens, Lens cap, Lens mount cover, Hood, Case, User manual
•Optional Item: Filter
Layouts (See illustration A)
1 Lens mount index 2 i-Function ring 3 Focus ring
4 Lens hood mount index 5 Lens 6 FULL/LIMIT switch
7 i-Function button 8 Lens information contacts
Attaching and Removing the Lens
C
► To attach the lens,
1 Remove the lens cap, lens mount cover, and body cap.
2 Align the red mark on the lens with the red mark on the
camera body. Then, rotate the lens as shown in the
illustration until it locks into place. (See illustration B)
► To remove the lens, press and hold the lens release
button, and then rotate the lens as shown in the
illustration. (See illustration C)
Setting the Focus Distance (See illustration D)
D
E
F
Set the focus distance by using the FULL/LIMIT switch on the
lens.
•FULL: Automatically set the focus distance.
(7.3 in (18.7 cm)-infinity)
•LIMIT: Focus on a subject that is 15.7 in (40 cm)-infinity from
the camera.
Use the Distance Scale function on the camera to display
the distance between a subject and the camera on the
camera screen. Refer to your camera manual for more
details.
Setting the Focus Method
Set the focus method on the camera.
Using the full-time manual focus: If you set auto focus (AF)
on the camera, you can adjust the focus more precisely by
using both auto focus (AF) and manual focus (MF).
Do not apply excessive force to the front of the lens while
the camera is using auto focus (AF). Doing so may cause
the lens to malfunction.
Using manual focus: If you set manual focus (MF), you can
manually adjust the focus by rotating the focus ring.
Use the MF Assist function on the camera to aid with
manual focusing. Refer to your camera manual for more
details.
Using i-Function
Specifications
When you press the i-Function button on the lens, you can use
the E mode or Z or adjust some shooting options.
In the E mode, you can select scenes or filter effects
that your camera supports. Z allows you to zoom in on
a subject with less degradation of photo quality than the Digital
zoom. This feature is available only when your camera supports
it. i-Scene mode is available only on some camera models.
1 Rotate the mode dial to P, A, S, M, or i.
2 Press [i-Function] on the lens to select a setting.
•Available settings may differ depending on the shooting
mode.
Lens Name
Shooting mode Setting
Shooting mode
Aperture
i
A, M
E
value
P, A, S, M, i Exposure
Z
P, A, S
value
White
Shutter
S, M
P, A, S, M
Balance, ISO
speed
Setting
3 Rotate the i-Function ring on the lens to adjust the setting
(or to change the zoom rate in Z mode).
4 Focus and capture the photo.
•To select the items that will appear when you press the
i-Function button on the lens, you can use the
iFn Customizing menu on your camera.
•Available scenes or filter effects in the E mode
may vary depending on the camera model.
•If you select Z, the photo resolution will vary
according to the zoom rate.
Using a Lens Hood (See illustration E)
To prevent deterioration of image quality by blocking out
unnecessary light, use a lens hood.
When you use a flash in situations where the distance
between the subject and the camera is close, the flash
light may be partially blocked by the lens or a lens hood.
To ensure proper lighting, remove the lens hood or adjust
the distance between the camera and subjects.
Using a Filter (optional) (See illustration F)
Before putting a filter on the lens, make sure it is compatible.
Refer to "Specifications" for compatible filter size.
•A filter is a precise optical product. Keep away from dust,
dirt, or scratches. Also, do not try to mount two or more
filters at the same time. Doing so may deteriorate the
image quality and cause vignetting (a reduction of an
image’s brightness or saturation at the periphery as the
viewing angle of the lens is hidden).
•In case of a thick framed filter, the vignetting can occur
with a wide-angle lens.
Focal Length
Focal Length in 35 mm
Equivalent
Lens ConstructionElements
Lens Construction-Groups
Aspherical Elements
ED Elements
Angle of View
Maximum Aperture
Minimum Aperture
Number of Diaphragm
Blades
Minimum Focus Distance
Maximum Magnification
Lens Hood
Optical Image Stabilizer
Mount Type
Filter Size
Max. Diameter
Length
Weight (Lens Only, Approx.)
Operating Temperature
Operating Humidity
SAMSUNG 60mm F2.8 Macro
ED OIS SSA
60 mm
92.4 mm
12
9
1
1
26.4°
F2.8
F32
7
0.187 m
1X
Included
Yes
Samsung NX Mount
52 mm
73.5 mm
84 mm
373 g
0–40 °C
5–85 %
Health and Safety Information
Please read the following safety tips carefully for proper and
safe use.
•Do not stare at the sun through the lens or camera.
This may cause severe damage to your eyes.
Warning •Keep your lens or camera away from small children
and pets.
•Do not store the lens in direct sunlight without the
lens cap. Direct sunlight that passes through the
lens may combust if it comes into contact with
Caution flammable materials.
•Use only sturdy tripods. Lightweight or unstable
tripods may fall over and damage the camera.
•Do not use chemicals such as thinner, alcohol, or benzene to
remove dust.
•Do not drop the lens or apply excessive shock to it. The lens is
a precise optical product.
•Avoid using the lens anywhere there is a sudden temperature
change. Keep the lens in a plastic bag or a camera case to
prevent condensation from forming on the inside or outside of
the lens.
•When carrying or not using the lens, place the lens cap and
lens mount cover on the lens to prevent contamination from
foreign particles and protect the lens from scratches.
•Do not keep the camera mounted on a tripod without the
lens cap. The inside of the camera can be damaged by direct
sunlight.
•Check the lens once every year or two for best performance.
•Do not apply excessive force to the front of the lens.
•For safe use of the lens, mount or dismount the lens while the
camera is turned off.
•Samsung is not responsible for any damage incurred by using
other manufacturers’ lenses.
•Make sure to change lenses only in a clean environment and
do not put your fingers into the lens mount when mounting the
lens. Foreign particles may affect shooting results or cause a
malfunction if they enter the camera body or the lens.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection
systems)
This marking on the product, accessories or literature indicates
that the product and its electronic accessories (e.g. charger,
headset, USB cable) should not be disposed of with other
household waste at the end of their working life. To prevent
possible harm to the environment or human health from
uncontrolled waste disposal, please separate these items from
other types of waste and recycle them responsibly to promote
the sustainable reuse of material resources. Household users
should contact either the retailer where they purchased this
product, or their local government office, for details of where
and how they can take these items for environmentally safe
recycling. Business users should contact their supplier and
check the terms and conditions of the purchase contract. This
product and its electronic accessories should not be mixed with
other commercial wastes for disposal.
Lens Storage and Maintenance
•Store the lens in dry and well ventilated areas.
•Do not store the lens in areas of high temperature or humidity
or in a closet, car, or confined area where chemicals are
stored.
•The lens is not waterproof. Be careful not to allow it to get wet
when using it near water.
Please refer to the warranty that came with your
product or visit our website www.samsung.com for
after-sales service or inquiries.
Download PDF