Samsung | H32B | Samsung H32B 사용자 매뉴얼

User Manual
H32B H40B
This product is designed to be used in South Korea only,
and the quality cannot be guaranteed in other countries.
(FOR KOREA UNIT STANDARD ONLY)
The color and shape of parts may differ from what is
shown. Specifications are subject to change without
notice to improve quality.
BN46-00281D-01
Table Of Contents
BEFORE USING THE
PRODUCT
PREPARATIONS
CONNECTING AND USING
A SOURCE DEVICE
8
Copyright
9
Cleaning
9
Storage
10
Safety Precautions
10
11
12
14
Symbols
Electricity and Safety
Installation
Operation
19
Checking the Contents
19
20
Removing the Packaging
Checking the Components
22
Parts
22
24
25
26
Control Panel
Reverse Side
Anti-theft Lock
Remote Control
29
Before Installing the Product (Installation
Guide)
29
30
Tilting Angle and Rotation
Ventilation
31
Dimensions
32
Installing the Wall Mount
32
32
Installing the Wall Mount Kit
Wall Mount Kit Specifications (VESA)
34
RS232C Connection
34
Cable Connection
43
Before Connecting
43
Pre-connection Checkpoints
44
Connecting and Using a PC
44
46
Connecting to a PC
Changing the Resolution
Table Of Contents
2
Table Of Contents
SCREEN ADJUSTMENT
48
Connecting to a Video Device
48
49
50
51
51
Connection Using the AV Cable
Connection Using the Component Cable
Connection Using an HDMI Cable
Connecting to an Audio System
Connecting to an Antenna
52
Changing the Input source
52
Source
53
Picture Mode
53
53
If the input source is PC
If the input source is AV, Component, HDMI or
TV
54
Backlight / Contrast / Brightness /
Sharpness / Color / Tint (G/R)
55
Screen Adjustment
55
56
57
Picture Size
Position
PC Screen Adjustment
57
Auto Adjustment
58
Advanced Settings
58
58
58
59
59
59
59
59
Dynamic Contrast
Black Tone
Flesh Tone
RGB Only Mode
Color Space
White Balance
Gamma
Motion Lighting (Off / On)
Table Of Contents
3
Table Of Contents
59
Picture Options
60
60
61
61
61
61
Color Tone
Digital Noise Filter
MPEG Noise Filter
HDMI Black Level
Film Mode
LED Motion Plus (Off / On)
61
Reset Picture
62
Sound Mode
63
Sound Effect
64
Broadcast Audio Options
65
SPDIF Output
65
Speaker Settings
66
Reset Sound
USING THE CHANNEL
MENU
67
Channel
67
67
68
Antenna (Air/Cable)
Auto Program
Fine Tune
SYSTEM
69
Setup
70
Time
70
70
71
72
Clock
Sleep Timer
On Timer
Off Timer
72
Menu Language
73
Eco Solution
73
73
73
74
Energy Saving
Eco Sensor (Off / On)
No Signal Power Off
Auto Power Off (Off / On)
SOUND ADJUSTMENT
Table Of Contents
4
Table Of Contents
SUPPORT
74
Caption
74
74
75
Caption
Caption Mode
Caption Options
76
Security
76
76
Channel Lock (Off / On)
Change PIN
77
PIP
77
Auto Protection Time
78
General
78
78
78
78
Game Mode (Off / On)
Auto Wall Mount
Penel Lock (Off / On)
Boot Logo (Off / On)
79
Anynet+(HDMI-CEC)
79
80
81
Anynet+(HDMI-CEC)
Auto Turn Off (No / Yes)
Receiver
82
DivX® Video On Demand
83
Self Diagnosis
83
83
83
84
Picture Test (Yes / No)
Sound Test (Yes / No)
Signal Information
Reset
84
Software Update
84
84
By USB
Alternative Software
85
Contact Samsung
Table Of Contents
5
Table Of Contents
TROUBLESHOOTING
GUIDE
SPECIFICATIONS
APPENDIX
86
Contents Home
86
87
88
97
98
Channel List
Guide
Media Play
Schedule Manager
Source
100
Requirements Before Contacting
Samsung Customer Service Center
100
100
101
Testing the Product
Checking the Resolution and Frequency
Check the followings.
104
Q&A
106
General
107
PowerSaver
108
Preset Timing Modes
110
License
111
Contact SAMSUNG WORLD WIDE
111
Customer Service Center
112
Responsibility for the Pay Service (Cost
to Customers)
112
112
112
Not a product defect
A Product damage caused by customer's fault
Others
114
Optimum Picture Quality and Afterimage
Burn-in Prevention
114
115
Optimum Picture Quality
Prevention of Afterimage Burn-in
Table Of Contents
6
Table Of Contents
117
Recycling
117
117
118
Free Disposal
Paid Disposal
Samsung's Green Management
119
Terminology
INDEX
Table Of Contents
7
Before Using the Product
Copyright
The contents of this manual are subject to change without notice to improve quality.
© 2012 Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is
prohibited.
The SAMSUNG and SyncMaster logos are registered trademarks of Samsung Electronics.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Ownership of all other trademarks is attributed to their due owner.
Before Using the Product
8
Before Using the Product
Cleaning
Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
Take the following steps when cleaning.
The following images are for reference only. Real-life situations may differ from what is shown in the
images.
1.
Power off the product and computer.
2.
Disconnect the power cord from the product.
Hold the power cable by the plug and do not touch the cable with wet
hands. Otherwise, an electric shock may result.
3.
Wipe the product with a clean, soft and dry cloth.
z
Do not use detergents that contain alcohol, solvent or
surface-active agents.
!
z
Do not spray water or detergent directly on the product.
4.
Wet a soft and dry cloth in water and wring thoroughly to clean the exterior
of the product.
5.
Connect the power cord to the product when cleaning is finished.
6.
Power on the product and computer.
Storage
High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used
nearby.
Contact Customer Service Center if the inside of the product needs cleaning (service fee will be
charged).
Before Using the Product
9
Before Using the Product
Safety Precautions
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR
BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO
QUALIFIED PERSONNEL.
This symbol indicates that high voltage is present inside. It is dangerous to
make any kind of contact with any internal part of this product.
This symbol alerts you that important literature concerning operation and
maintenance has been included with this product.
Symbols
Warning
A serious or fatal injury may result if instructions are not followed.
Caution
Personal injury or damage to properties may result if instructions are
not followed.
Activities marked by this symbol are prohibited.
Instructions marked by this symbol must be followed.
Before Using the Product
10
Before Using the Product
Electricity and Safety
The following images are for reference only. Real-life situations may differ from what is shown in the
images.
Warning
Do not use a damaged power cord or plug, or a loose power socket.
z
An electric shock or fire may result.
Do not use multiple products with a single power socket.
z
Overheated power sockets may cause a fire.
Do not touch the power plug with wet hands. Otherwise, an electric shock may
result.
Insert the power plug all the way in so it is not loose.
z
An unsecure connection may cause a fire.
!
Connect the power plug to a grounded power socket (type 1 insulated devices
only).
!
z
An electric shock or injury may result.
Do not bend or pull the power cord with force. Be careful not to leave the power
cord under a heavy object.
z
Damage to the cord may result in a fire or electric shock.
Do not place the power cord or product near heat sources.
z
A fire or electric shock may result.
Clean any dust around the pins of the power plug or the power socket with a dry
cloth.
!
z
A fire may result.
Before Using the Product
11
Before Using the Product
Caution
Do not disconnect the power cord while the product is being used.
z
The product may become damaged by an electric shock.
Only use the power cord provided with your product by Samsung. Do not use the
power cord with other products.
z
!
A fire or electric shock may result.
Keep the power socket where the power cord is connected unobstructed.
z
The power cord must be disconnected to cut off power to the product when
an issue occurs.
!
z
Note that the product is not completely powered down by using only the
power button on the remote.
Hold the plug when disconnecting the power cord from the power socket.
z
An electric shock or fire may result.
!
Installation
Warning
DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP
OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.
z
A fire may result.
Have a technician install the wall-mount hanger.
!
z
Installation by an unqualified person can result in an injury.
z
Only use approved cabinets.
Do not install the product in poorly ventilated spaces such as a bookcase or
closet.
z
An increased internal temperature may cause a fire.
Install the product at least 10cm away from the wall to allow ventilation.
z
An increased internal temperature may cause a fire.
!
Before Using the Product
12
Before Using the Product
Keep the plastic packaging out of the reach of children.
z
Children may suffocate.
!
Do not install the product on an unstable or vibrating surface (insecure shelf,
sloped surface, etc.)
z
The product may fall and become damaged and/or cause an injury.
z
Using the product in an area with excess vibration may damage the product
or cause a fire.
Do not install the product in a vehicle or a place exposed to dust, moisture (water
drips, etc.), oil, or smoke.
z
!
A fire or electric shock may result.
Do not expose the product to direct sunlight, heat, or a hot object such as a
stove.
z
The product lifespan may be reduced or a fire may result.
Do not install the product within the reach of young children.
z
The product may fall and injure children.
z
As the front is heavy, install the product on a flat and stable surface.
Bend and keep part of the outdoor TV antenna cable hanging downwards (the
part inside the room) to prevent rainwater from entering the product.
z
!
If rainwater enters the product, a fire or electric shock can occur.
When using an outdoor antenna, be sure to install the antenna away from nearby
power lines to prevent the antenna from collapsing onto them in strong winds.
!
z
A collapsed antenna can cause an electric shock or injury.
Edible oil, such as soybean oil, can damage or deform the product. Do not install
the product in a kitchen or near a kitchen counter.
Before Using the Product
13
Before Using the Product
Caution
Do not drop the product while moving.
z
Product failure or personal injury may result.
!
Do not set down the product on its front.
z
The screen may become damaged.
When installing the product on a cabinet or shelf, make sure that the bottom
edge of the front of the product is not protruding.
z
The product may fall and become damaged and/or cause an injury.
z
Install the product only on cabinets or shelves of the right size.
Set down the product gently
z
Product failure or personal injury may result.
!
SAMSUNG
!
Installing the product in an unusual place (a place exposed to a lot of fine
particles, chemical substances or extreme temperatures, or an airport or train
station where the product should operate continuously for an extended period of
time) may seriously affect its performance.
z
Be sure to consult Samsung Customer Service Center if you want to install
the product at such a place.
Operation
Warning
There is a high voltage inside the product. Never disassemble, repair or modify
the product yourself.
z
A fire or electric shock may result.
z
Contact Samsung Customer Service Center for repairs.
Before moving the product, turn off the power switch and disconnect the power
cord, antenna cable and all other connected cables.
!
z
Damage to the cord may result in a fire or electric shock.
Before Using the Product
14
Before Using the Product
If the product generates abnormal sounds, a burning smell or smoke, disconnect
the power cord immediately and contact Samsung Customer Service Center.
z
!
An electric shock or fire may result.
Do not let children hang from the product or climb on top of it.
z
Children may become injured or seriously harmed.
If the product is dropped or the outer case is damaged, turn off the power switch
and disconnect the power cord. Then contact Samsung Customer Service
Center.
z
Continued use can result in a fire or electric shock.
Do not leave heavy objects or items that children like (toys, sweets, etc.) on top of
the product.
z
The product or heavy objects may fall as children try to reach for the toys or
sweets resulting in a serious injury.
During a lightning or thunderstorm, power off the product and remove the power
cable.
z
!
A fire or electric shock may result.
Do not drop objects on the product or apply impact.
z
A fire or electric shock may result.
!
Do not move the product by pulling the power cord or any cable.
z
Product failure, an electric shock or fire may result from a damaged cable.
If a gas leakage is found, do not touch the product or power plug. Also, ventilate
the area immediately.
!
GAS
z
Sparks can cause an explosion or fire.
Do not lift or move the product by pulling the power cord or any cable.
z
Product failure, an electric shock or fire may result from a damaged cable.
Do not use or keep combustible spray or an inflammable substance near the
product.
!
z
An explosion or fire may result.
Before Using the Product
15
Before Using the Product
Ensure the vents are not blocked by tablecloths or curtains.
z
100
An increased internal temperature may cause a fire.
Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects that
burn easily (paper, matches, etc) into the product (via the vent or input/output
ports, etc).
z
Be sure to power off the product and disconnect the power cord when water
or other foreign substances have entered the product. Then contact
Samsung Customer Service Center.
z
Product failure, an electric shock or fire may result.
Do not place objects containing liquid (vases, pots, bottles, etc) or metallic
objects on top of the product.
z
Be sure to power off the product and disconnect the power cord when water
or other foreign substances have entered the product. Then contact
Samsung Customer Service Center.
z
Product failure, an electric shock or fire may result.
Caution
Leaving the screen fixed on a stationary image for an extended period of time
may cause afterimage burn-in or defective pixels.
z
!
Activate power-saving mode or a moving-picture screen saver if you will not
be using the product for an extended period of time.
-_!
Disconnect the power cord from the power socket if you do not plan on using the
product for an extended period of time (vacation, etc).
z
Dust accumulation combined with heat can cause a fire, electric shock or
electric leakage.
Use the product at the recommended resolution and frequency.
z
Your eyesight may deteriorate.
!
Do not hold the product upside-down or move it by holding the stand.
z
The product may fall and become damaged or cause an injury.
Before Using the Product
16
Before Using the Product
Looking at the screen too close for an extended period of time can deteriorate
your eyesight.
!
Do not use humidifiers or stoves around the product.
z
A fire or electric shock may result.
Rest your eyes for more than 5 minutes for every 1 hour of product use.
z
Eye fatigue will be relieved.
!
Do not touch the screen when the product has been turned on for an extended
period of time as it will become hot.
Store small accessories out of the reach of children.
!
Exercise caution when adjusting the product angle or stand height.
!
z
Your hand or finger may get stuck and injured.
z
Tilting the product at an excessive angle may cause the product to fall and
an injury may result.
Do not place heavy objects on the product.
z
Product failure or personal injury may result.
When using headphones or earphones, do not turn the volume too high.
z
Having the sound too loud may damage your hearing.
Be careful that children do not place the battery in their mouths when removed
from the remote control. Place the battery in a location that children or infants
cannot reach.
z
If children have had the battery in their mouths, consult your doctor
immediately.
Use only the specified standardized batteries, and do not use a new battery and
a used battery at the same time.
z
Otherwise, the batteries may be damaged or cause fire, personal injury or
damage due to a leakage of the internal liquid.
Before Using the Product
17
Before Using the Product
When replacing the battery, insert it with the right polarity (+, -).
z
Otherwise, the battery may become damaged or it may cause fire, personal
injury or damage due to leakage of the internal liquid.
!
The batteries (and rechargeable batteries) are not ordinary refuse and must be
returned for recycling purposes. The customer is responsible for returning the
used or rechargeable batteries for recycling.
!
z
The customer can return used or rechargeable batteries to a nearby public
recycling center or to a store selling the same type of the battery or
rechargeable battery.
Before Using the Product
18
1
1.1
Preparations
Checking the Contents
1.1.1 Removing the Packaging
1
Open the packaging box. Be careful not to damage the product when you open the packaging with
a sharp instrument.
2
Remove the styrofoam from the product.
3
Check the components and remove the styrofoam and plastic bag.
4
z
The appearance of actual components may differ from the image shown.
z
This image is for reference only.
Store the box in a dry area so that it can be used when moving the product in the future.
1 Preparations
19
1.1.2 Checking the Components
z
Contact the vendor where you purchased the product if any components are missing.
z
The appearance of the components and items sold separately may differ from the image shown.
Components
Quick setup guide
Warranty card
User manual
+
-
1
Preparations
+
Power cord
Remote Control
Batteries
Holder wire stand
Stand
Antenna cable
1 Preparations
20
1
Preparations
Items sold separately
The following items can be purchased at your nearest retailer.
Wall-mount KIT
HDMI-DVI cable
HDMI cable
RCA stereo cable
Stereo cable
RCA cable
Video cable
RS232C stereo cable
Optical cable
1 Preparations
21
1
1.2
Preparations
Parts
1.2.1 Control Panel
POWER
Panel Key
Location
Description
Power on the product.
If you press the [
] button when the product is turned on, the control
menu will be displayed.
To exit the OSD menu, press and hold the panel key for at least one
second.
Move to the upper or lower menu. You can also adjust the value of an
option.
In TV mode, you can change the channel by moving the panel key up
or down when the control menu is not displayed.
Move to the left or right menu.
You can adjust the volume by moving the panel key left or right when
the control menu is not displayed.
Remote sensor
To control the remote control in front of the product, lower the remote
control sensor in the direction of the arrow.
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
1 Preparations
22
1
Preparations
Control menu
If you press the [
] button on the panel key (product) when the product is turned on, the control menu
will be displayed.
CONTENT
Return
Location
Description
Select the connected input source.
Move the panel key right to select Source [
] in the control menu.
When the list of input sources is displayed, move the panel key up or
down to select the desired input source. Next, press the panel key.
Display the OSD menu.
Move the panel key left to select menu [
] in the control menu.
The OSD control screen will appear. Move the panel key right to select
the desired menu. You can select a sub-menu item by moving the panel
key up, down, left, or right. To change settings, select the desired menu
and press the panel key.
Enter Contents Home mode.
CONTENT
Move the panel key up to select Contents Home [
menu.
CONTENT
] in the control
Power off the product.
Move the panel key down to select Power off [
] in the control menu.
Next, press the panel key.
Exit the control menu.
1 Preparations
23
1
Preparations
1.2.2 Reverse Side
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
3
POWER
RS-232 IN
(5V 0.5A)
AV IN 2
Port
[COMPONENT / AV IN]
[RS-232 IN]
[HDMI IN 1(DVI)]
[HDMI IN 2], [HDMI IN 3]
[DIGITAL AUDIO OUT(OPTICAL)]
[PC / DVI AUDIO IN]
[PC IN]
[AUDIO OUT]
[ANT IN]
[
(5V 0.5A)]
[AV IN 2]
Description
Connects to a source device using the AV/component cable.
Connects to a source device using an RS232C cable.
Connects to a source device using an HDMI-DVI cable.
Connects to a source device using an HDMI cable.
Connects to a audio device using the optical(digital) cable.
Receives sound from a PC via an audio cable.
Connects to a source device using a D-SUB cable.
Connects to a audio device using the audio(analog) cable.
Connect to an antenna cable.
USB memory device port.
Connects to the audio and video output port on a source device
through an AV/RCA cable.
1 Preparations
24
1
Preparations
Assembling the Holder-Wire
1.2.3 Anti-theft Lock
z
An anti-theft lock allows you to use the product securely even in public places.
z
The locking device shape and locking method depend on the manufacturer. Refer to the user
guide provided with your anti-theft locking device for details.
To lock an anti-theft locking device
1
2
3
4
Fix the cable of your anti-theft locking device to a heavy object such as a desk.
Put one end of the cable through the loop on the other end.
Insert the locking device into the anti-theft lock slot at the back of the product.
Lock the locking device.
z
An anti-theft locking device can be purchased separately.
z
Refer to the user guide provided with your anti-theft locking device for details.
z
Anti-theft locking devices can be purchased at electronics retailers or online.
1 Preparations
25
1
Preparations
1.2.4 Remote Control
z
Using other display devices in the same space as the remote control of this product can cause the
other display devices to be inadvertently controlled.
z
Remote control button functions may differ for different products.
Turns the product on and off.
Displays and selects the available video
sources.
Press to access channels directly.
Press to select additional digital
channels being broadcasted by the
same station. For example, to select
channel ‘54-3’, press ‘54’, then press
‘-’ and ‘3’.
Adjusts the volume.
ᯕᱥ
₥ձ
Cuts off the sound temporarily.
᳑ᬊ⯩
Changes channels.
₥ձ
༊ಾ
Displays the channel list on the
screen.
Displays Media Play
Quickly select frequently used
functions.
Returns to the previous channel.
Displays the main on-screen menu.
ີ‫ە‬
ມ❑ၙॵᨕ
ႊᘂᦩԕ
e⠙ີ‫ە‬
ᱶᅕ⢽᜽
ᅖȡ
᳦ഭ
View the air time and program
information for each channel while
viewing a digital broadcast.
Display information on the screen.
Select the on-screen menu items and
change the values seen on the menu.
Returns to the previous menu.
⪵໕ⓍʑChoose the picture size.
⪵໕༉ऽ : Choose the picture mode
ᖁ⪙₥ձAdd channels you frequently
view to the list of favorite channels
so that you can access them quickly.
Exit the menu.
Use these buttons according to the
directions on screen.
⪵໕Ⓧʑ
⪵໕༉ऽ
ᖁ⪙₥ձ
This button can be used in the
Media Play menu.
1 Preparations
26
1
Preparations
Adjusting the OSD with the Remote Control
ີ‫ە‬
1.
Open the OSD menu.
2.
Select from Picture, Sound, Channel, System or Support in the
displayed OSD menu screen.
3.
Change settings as desired.
4.
Finish setting.
5.
Close the onscreen display (OSD) menu.
To place batteries in the remote control
1
2
3
1 Preparations
27
Remote Control Reception Range
7m ~ 10m
1
Preparations
Use the remote control within 7m to 10m from the sensor on the product at an angle of 30˚ from the left
and right.
z
Store used batteries out of reach of children and recycle.
z
Do not use a new and used battery together. Replace both batteries at the same time.
z
Remove batteries when the remote control is not to be used for an extended period of time.
1 Preparations
28
1
1.3
Preparations
Before Installing the Product (Installation Guide)
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the
installation instructions.
z
Ensure that an authorized installation company installs the wall mount.
z
Otherwise, it may fall and cause personal injury.
z
Make sure to install the specified wall mount.
1.3.1 Tilting Angle and Rotation
Contact Samsung Customer Service Center for further details.
15 A The product can be tilted at a maximum angle of 15 from a perpendicular wall surface.
B To use the product vertically (portrait), turn it clockwise so that the LED is pointing down.
1 Preparations
29
1
Preparations
1.3.2 Ventilation
1. Installation on a Perpendicular Wall
A Minimum 40 mm
B Ambient temperature: Under 35 C
When installing the product on a perpendicular wall, allow
z
at least 4 cm of space between the product and wall
surface for ventilation and ensure that the ambient
A
temperature is kept below 35 C.
B
Figure 1.1 Side view
2. Installation on an Indented Wall
Contact Samsung Customer Service Center for further details.
B
D
D
Figure 1.3 Top view
A
Plane view
A Minimum 40 mm
B Minimum 70mm
C Minimum 50 mm
C
E
D Minimum 50 mm
E Ambient temperature: Under 35 C
Figure 1.2 Side view
When installing the product on an indented wall, allow at least the space specified above between the
product and wall for ventilation and ensure that the ambient temperature is kept below 35 C.
1 Preparations
30
1
1.4
Preparations
Dimensions
1
5
6
2
4
3
Unit: mm
Model name
1
2
3
4
5
6
H32B
188.8
88.1
95.4
482.4
200.0
200.0
H40B
244.0
148.5
160.0
613.1
200.0
200.0
All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice.
Refer to the dimensions prior to performing installation of your product. Not responsible for
typographical or printed errors.
1 Preparations
31
1
1.5
Preparations
Installing the Wall Mount
1.5.1 Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the product on the wall.
For detailed information on installing the wall mount, see the instructions provided with the wall mount.
We recommend you contact a technician for assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if
you elect to install the wall mount on your own.
1.5.2 Wall Mount Kit Specifications (VESA)
Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to
surfaces other than plaster board, please contact your nearest dealer for additional information.
If you install the product on a slanted wall, it may fall and result in severe personal injury.
z
Standard dimensions for wall mount kits are shown in the table
below.
z
Samsung wall mount kits contain a detailed installation manual
and all parts necessary for assembly are provided.
z
Do not use screws that do not comply with the VESA standard
screw specifications.
z
Do not use screws that are longer than the standard length or
do not comply with the VESA standard screw specifications.
Screws that are too long may cause damage to the inside of the
product.
z
For wall mounts that do not comply with the VESA standard
screw specifications, the length of the screws may differ
depending on the wall mount specifications.
z
Do not fasten the screws too firmly. This may damage the
product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
z
Samsung is not liable for product damage or personal injury
when a non-VESA or non-specified wall mount is used or the
consumer fails to follow the product installation instructions.
z
Do not mount the product at more than a 15 degree tilt.
z
Always have two people mount the product on a wall.
1 Preparations
32
1
Preparations
Unit: mm
VESA
Standard Screw
Quantity
200 x 200
M6
4
Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to
electric shock.
1 Preparations
33
1
1.6
Preparations
RS232C Connection
1.6.1 Cable Connection
RS232 Network spec
Interface
Pin
Bit rate
RS232C (9 pins)
TxD (No. 2), RxD (No. 3), GND (No. 5)
9600 bps
Data bits
8 bit
Parity
None
Stop bit
1 bit
Flow control
None
Maximum length
4m (only shielded type)
Pin assignment
1 2 3 4 5
6 7 8 9
Pin
Signal
1
Detect data carrier
2
Received data
3
Transmitted data
4
Prepare data terminal
5
Signal ground
6
Prepare data set
7
Send request
8
Clear to send
9
Ring indicator
1 Preparations
34
1
Preparations
RS232C cable
Connector: 9-Pin D-Sub to Stereo Cable
9
6
3
2
1
5
-P2STEREO PLUG
(3.5ø)
1
-P1-
-P1-
Female
-P1-
-P2-
-P2-
Rx
2
-------->
1
Tx
Tx
3
<--------
2
Rx
Gnd
5
---------
3
Gnd
STEREO
PLUG
(3.5ø)
Connection
RS232C
Control Code
z
No.
Command type
Command
Value range
1
Power control
0x11
0~1
2
Input Source Control
0x14
-
3
Contrast Control
0x24
0 ~ 100
4
Brightness Control
0x25
0 ~ 100
5
Manual
Lamp (Backlight) Control 0x58
0 ~ 100
6
CHANNEL UP DOWN
0x61
0~1
7
VOLUME UP DOWN
0x62
0~1
All communications take place in hexadecimals. The checksum is calculated by adding up all values
except the header. If a checksum adds up to be more than 2 digits as shown below
(11+FF+01+01=112), the first digit is removed.
1 Preparations
35
1
Preparations
E.g. Power On & ID=0
Header
Command
Data length
Data 1
1
"Power"
Data length
Data 1
1
1
ID
0xAA
0x11
Header
Command
Checksum
ID
0xAA
13
0x11
This product doesn't support ID setup. This product uses only zero value for ID.
Power control
z
Function
A product can be powered on and off using a PC.
z
Viewing power state (Get Power ON / OFF Status)
Header
Command
Data length
ID
0xAA
z
Checksum
0x11
0
Setting power ON/Off (Set Power ON / OFF)
Header
Command
Data length
Data
1
"Power"
ID
0xAA
0x11
Checksum
"Power": Power code to be set on a product.
1: Power ON
0: Power OFF
z
Ack
Header
Command
Data length
Ack/Nak
r-CMD
Val1
3
‘A’
0x11
"Power"
Data length
Ack/Nak
r-CMD
Val1
3
‘N’
0x11
"ERR"
ID
0xAA
0xFF
Checksum
"Power": Power code to be set on a product.
z
Nak
Header
Command
ID
0xAA
0xFF
Checksum
"ERR": A code showing what error has occurred.
1 Preparations
36
1
Preparations
Input source control
z
Function
The input source of a product can be changed using a PC.
z
Viewing input source state (Get Input Source Status)
Header
Command
Data length
ID
0xAA
z
0x14
Checksum
0
Setting the input source (Set Input Source)
Header
Command
0xAA
0x14
Data length
Data
1
"Input
Source"
ID
Checksum
"Input Source": An input source code to be set on a product.
0x14
PC
0x0C
AV (AV1)
0x0D
AV2
0x0E
Ext. (SCART1)
0x08
Component
0x40
DTV
0x21
HDMI1
0x22
HDMI1_PC
0x23
HDMI2
0x24
HDMI2_PC
0x31
HDMI3
0x32
HDMI3_PC
Note. HDMI1_PC, HDMI2_PC and HDMI3_PC cannot be used with the Set command. They only
respond to "Get" commands.
z
Ack
Header
Command
0xAA
0xFF
Data length
Ack/Nak
r-CMD
Val1
3
‘A’
0x14
"Input
Source"
ID
Checksum
"Input Source": An input source code to be set on a product.
1 Preparations
37
1
Preparations
z
Nak
Header
Command
Data length
Ack/Nak
r-CMD
Val1
3
‘N’
0x14
"ERR"
ID
0xAA
0xFF
Checksum
"ERR": A code showing what error has occurred.
0 : Check Sum Error
1 : Not Supported Command
Contrast Control
z
Function
The "Contrast" of a product can be changed using a PC.
z
Get "Contrast" Status
Header
Command
Data length
ID
0xAA
z
Checksum
0x24
0
Set Contrast
Header
Command
Data length
Data 1
1
"Contrast"
ID
0xAA
0x24
Checksum
"Contrast" : Contrast value code to be set on a product ( 0 ~ 100 )
z
Ack
Header
Command
Data length
Ack/Nak
r-CMD
Val1
3
‘A’
0x24
"Contrast"
ID
0xAA
0xFF
Checksum
"Contrast" : Contrast value code to be set on a product ( 0 ~ 100 )
z
Nak
Header
Command
Data length
Ack/Nak
r-CMD
Val1
3
‘N’
0x24
"ERR"
ID
0xAA
0xFF
Checksum
"ERR": A code showing what error has occurred.
0 : Check Sum Error
1 : Not Supported Command
1 Preparations
38
1
Preparations
Brightness Control
z
Function
The "Brightness" of a product can be changed using a PC.
z
Get "Brightness" Status
Header
Command
Data length
ID
0xAA
z
Checksum
0x25
0
Set Brightness
Header
Command
Data length
Data
1
"Brightness"
ID
0xAA
0x25
Checksum
"Brightness" : Brightness value code to be set on a product. ( 0 ~ 100 )
z
Ack
Header
Command
Data length
Ack/Nak
r-CMD
Val1
3
‘A’
0x25
"Brightness"
ID
0xAA
0xFF
Checksum
"Brightness" : Brightness value code to be set on a product. ( 0 ~ 100 )
z
Nak
Header
Command
Data length
Ack/Nak
r-CMD
Val1
3
‘N’
0x25
"ERR"
ID
0xAA
0xFF
Checksum
"ERR": A code showing what error has occurred.
1 Preparations
39
1
Preparations
Manual Lamp (Backlight) Control
z
Function
The "Manual Lamp(backlight)" of a product can be changed using a PC.
z
Get "LampValue" Status
Header
Command
Data length
ID
0xAA
z
Checksum
0x58
0
Set "LampValue"
Header
Command
Data length
Data
1
"LampValue"
ID
0xAA
0x58
Checksum
"LampValue" : Manual Lamp value to be set on a product. (0 ~ 100)
z
Ack
Header
Command
Data length
Ack/Nak
r-CMD
Val1
3
‘A’
0x58
"LampValue"
ID
0xAA
0xFF
Checksum
"LampValue" : Manual Lamp value to be set on a product. (0 ~ 100)
z
Nak
Header
Command
Data length
Ack/Nak
r-CMD
Val1
3
‘N’
0x58
"ERR"
ID
0xAA
0xFF
Checksum
"ERR": A code showing what error has occurred.
0 : Check Sum Error
1 : Not Supported Command
1 Preparations
40
1
Preparations
Channel Up/Down
z
Function
Personal Computer can control TV Channel.
(If PIP is on and PIP source is TV, it also should work.)
z
Get TV Channel Up/Down : N/A
z
Set TV "Channel Up/Down"
Header
Command
0xAA
0x61
Data length
Data 1
1
"Channel
Up/Down"
ID
Checksum
"Channel Up/Down": Channel UP or Down to be set on a product. (0~1)
0 : Up
1 : Down
z
Ack
Header
Data length
Command
Ack/Nak
r-CMD
Val1
0x61
"Channel
Up/
Down"
ID
0xAA
0xFF
3
‘A’
Checksum
"Channel Up/Down": Channel UP or Down to be set on a product. (0~1)
z
Nak
Header
Command
Data length
Ack/Nak
r-CMD
Val1
3
‘N’
0x61
"ERR"
ID
0xAA
0xFF
Checksum
"ERR": A code showing what error has occurred.
0 : Check Sum Error
1 : Not Supported Command
1 Preparations
41
1
Preparations
Volume control
z
Function
The volume of a product can be adjusted using a PC.
z
Viewing volume state (Get Volume Status) : N/A
z
Setting the volume (Set Volume)
Header
Command
Data length
Data
1
"Volume"
ID
0xAA
0x62
Checksum
"Volume": Volume value code to be set on a product. (0 ~ 1)
0 : Up
1 : Down
z
Ack
Header
Command
Data length
Ack/Nak
r-CMD
Val1
3
‘A’
0x62
"Volume"
ID
0xAA
0xFF
Checksum
"Volume": Volume value code to be set on a product.
z
Nak
Header
Command
Data length
Ack/Nak
r-CMD
Val1
3
‘N’
0x62
"ERR"
ID
0xAA
0xFF
Checksum
"ERR": A code showing what error has occurred.
0 : Check Sum Error
1 : Not Supported Command
1 Preparations
42
2
2.1
Connecting and Using a Source Device
Before Connecting
Check the following before you connect this product with other devices.
Devices that can be connected to this product include PCs, camcorders, speakers, set top boxes and
DVD/Blu-ray Disc players.
2.1.1 Pre-connection Checkpoints
z
Before connecting a source device, read the user manual provided with it. The number and locations
of ports on source devices may differ from device to device.
z
Do not connect the power cable until all connections are completed. Connecting the power cable
during connection may damage the product.
z
Connect the sound ports correctly: left = white and right = red.
z
Check the types of ports at the back of the product you want to connect.
2 Connecting and Using a Source Device
43
2
2.2
Connecting and Using a Source Device
Connecting and Using a PC
2.2.1 Connecting to a PC
z
Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
z
A PC can be connected to the product in a variety of ways.
Select a connection method suitable for your PC.
Connecting parts may differ in different products.
Connection using the D-SUB cable (Analog type)
PC IN
PC / DVI
AUDIO IN
Connection Using an HDMI-DVI Cable
HDMI IN 1 (DVI)
PC / DVI
AUDIO IN
When you connect a PC to the product using an HDMI-DVI cable, set Edit Name to DVI PC to access
video and audio content stored on the PC.
2 Connecting and Using a Source Device
44
2
Connecting and Using a Source Device
Connection Using an HDMI Cable
HDMI IN (DVI)
2 Connecting and Using a Source Device
45
2
Connecting and Using a Source Device
2.2.2 Changing the Resolution
Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality.
The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected.
Changing the Resolution on Windows XP
Go to Control Panel
1
Display
Settings, and change the resolution.
3
2
**********
**** ****
Changing the Resolution on Windows Vista
Go to Control Panel
Personal Settings
1
2
3
4
Display Settings, and change the resolution.
***********
***********
2 Connecting and Using a Source Device
46
2
Connecting and Using a Source Device
Changing the Resolution on Windows 7
Go to Control Panel
Display
Screen Resolution, and change the resolution.
1
2
3
4
2 Connecting and Using a Source Device
47
2
2.3
Connecting and Using a Source Device
Connecting to a Video Device
z
Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
z
You can connect a video device to the product using a cable.
†
†
Connecting parts may differ in different products.
After connecting a source device, press the TV/외부입력 button on the remote control and
select the connected source device.
2.3.1 Connection Using the AV Cable
Rear
VIDEO
R AUDIO L
Side
VIDEO
R AUDIO L
2 Connecting and Using a Source Device
48
2
Connecting and Using a Source Device
2.3.2 Connection Using the Component Cable
R AUDIO L
COMPONENT /AV IN
2 Connecting and Using a Source Device
49
2
Connecting and Using a Source Device
2.3.3 Connection Using an HDMI Cable
Rear
HDMI IN 2
Side
HDMI IN 3
Using an HDMI cable or HDMI to DVI Cable (up to 1080p)
z
For better picture and audio quality, connect to a digital device using an HDMI cable.
z
An HDMI cable supports digital video and audio signals, and does not require an audio cable.
†
To connect the TV to a digital device that does not support HDMI output, use an HDMI/DVI and
audio cables.
z
The picture may not display normally (if at all) or the audio may not work if an external device that
uses an older version of HDMI mode is connected to the TV. If such a problem occurs, ask the
manufacturer of the external device about the HDMI version and, if out of date, request an upgrade.
z
Be sure to use an HDMI cable with a thickness of 1.4 cm or less.
z
Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection
error may occur.
z
A basic high-speed HDMI cable or one with ethernet is recommended. This product does not
support the ethernet function via HDMI.
2 Connecting and Using a Source Device
50
2
Connecting and Using a Source Device
2.3.4 Connecting to an Audio System
Using an Audio (Analog) Cable
AUDIO OUT
Using an Optical (Digital) Cable
DIGITAL
AUDIO OUT
(OPTICAL)
2.3.5 Connecting to an Antenna
7)'6)'"OUFOOB
ANT IN
The initial settings process runs automatically when the product is turned on for the first time after
purchase.
Take extra care to ensure the wires inside the cable do not bend.
2 Connecting and Using a Source Device
51
2
2.4
Connecting and Using a Source Device
Changing the Input source
2.4.1 Source
Source allows you to select a variety of sources and change source device names.
메뉴 [m]
Support
Contents Home
Source
[
]
You can display the screen of a source device connected to the product. Select a source from Source
List to display the screen of the selected source.
Refer to page 98 product for details about the Source menu.
Contents Home
Channel List
Guide
Media Play
Schedule Manager
Source
Return
The displayed image may differ depending on the model.
The input source can also be changed by using the TV/외부입력 button on the remote control.
The screen may not display correctly if an incorrect source is selected for the source device you want to
convert to.
2 Connecting and Using a Source Device
52
3
Screen Adjustment
Configure the Picture settings (Brightness, Color Tone, etc.).
The layout of the Picture menu options may vary depending on the product.
3.1
Picture Mode
메뉴 [m]
Picture
Picture Mode
[
]
Select a picture mode (Picture Mode) suitable for the environment where the product will be used.
Different Picture Mode options are displayed depending on the current input source.
Picture
Picture Mode
Standard
· Backlight
60
· Contrast
100
· Brightness
45
· Sharpness
50
· Color
50
· Tint (G/R)
G 50
R 50
The displayed image may differ depending on the model.
3.1.1
If the input source is PC
z
Entertain: Suitable for watching movies and games.
z
Standard: Suitable for a normal environment
3.1.2
If the input source is AV, Component, HDMI or TV
z
Dynamic: This mode is suitable when the ambient light is bright.
z
Standard: This mode is generally suitable for any environment.
z
Natural: Suitable for reducing eye strain. (H40B, H46B Model Only)
z
Movie: This mode reduces eye fatigue.
3 Screen Adjustment
53
3
3.2
Screen Adjustment
Backlight / Contrast / Brightness / Sharpness / Color /
Tint (G/R)
메뉴 [m]
Picture
[
]
Your monitor has several options for adjusting picture quality.
z
When you make changes to Backlight, Contrast, Brightness, Sharpness, Color or Tint (G/R),
the OSD will be adjusted accordingly.
z
When connecting a PC, you can only make changes to Backlight, Contrast, Brightness, and
Sharpness.
z
You can adjust and store Settings for each external device connected to the product.
z
Lowering picture brightness reduces power consumption.
3 Screen Adjustment
54
3
3.3
Screen Adjustment
Screen Adjustment
메뉴 [m]
Picture
Screen Adjustment
[
]
Screen Adjustment provides various picture size and aspect ratio options.
Screen Adjustment
Picture Size
16:9
· Position
PC Screen Adjustment
The displayed image may differ depending on the model.
3.3.1
Picture Size
If you have a cable box or satellite receiver, it may have its own set of screen sizes as well. However, we
highly recommend you use your product’s 16:9 mode most of the time.
z
16:9: Sets the picture to 16:9 wide mode.
z
Zoom1: Use for moderate magnification. Cuts off the top and sides.
z
Zoom2: Use for a stronger magnification.
z
Smart View 1: Reduces the 16:9 picture by 50%.
z
†
Smart View 1 is enabled only in HDMI mode.
†
The picture size can vary depending on the input resolution when you play content from
Videos in Media.
Smart View 2: Reduces the 16:9 picture by 25%.
†
Smart View 2 is enabled only in DTV or HDMI modes.
†
The picture size can vary depending on the input resolution when you play content from
Videos in Media.
z
Wide Fit: Enlarges the aspect ratio of the picture to fit the entire screen.
z
4:3: Sets the picture to basic (4:3) mode.
Do not set your product to 4:3 format for a long time. The borders displayed on the left and right,
or top and bottom of the screen may cause image retention (screen burn) which is not covered by
the warranty.
z
Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or
Component (1080i / 1080p) signals are inputted.
3 Screen Adjustment
55
3
Screen Adjustment
z
Custom: Changes the resolution to suit the user's preferences.
You can adjust and store settings for each external device you have connected to an input on the
product.
Picture Sizes available by Input Source.
3.3.2
Input Source
Picture Size
ATV, AV, Component (480i, 480p)
16:9, Zoom1, Zoom2, 4:3
DTV (1080i)
16:9, 4:3, Smart View 2, Wide Fit, Screen Fit
Component (1080i, 1080p)
16:9, 4:3, Wide Fit, Screen Fit
HDMI (720p, 1080i, 1080p)
16:9, 4:3, Wide Fit, Screen Fit, Smart View 1,
Smart View 2
PC, HDMI (when a PC is connected)
16:9, 4:3
Position
Adjusts the picture position. Position is only available if Picture Size is set to Zoom1, Zoom2 or Screen
fit.
z
1
2
3
4
5
To use the Position function after selecting Zoom1or Zoom2 follow these steps.
Press the
button to select Position.
Press the [
Press the
] button.
or
Press the [
button to move the picture up or down.
] button.
Select Close by pressing the
and
buttons sequentially. To reset the picture position, press
Reset.
z
To use the Position function after selecting Screen Fit in HDMI (1080i/1080p) or Component
(1080i/1080p) or Custom, follow these steps.
1
2
3
4
5
Press the
button to select Position.
Press the [
Press the
Press the [
] button.
/
/
/
button to move the picture.
] button.
Select Close by pressing the
and
buttons sequentially.
If you want to reset the picture to its original position, select Reset in the Position screen. The
picture will be set to its default position.
3 Screen Adjustment
56
3
Screen Adjustment
3.3.3
PC Screen Adjustment
Available in PC mode only.
Coarse / Fine: Removes or reduces picture noise. If the noise is not removed by Fine-tuning alone, use
the Coarse function to adjust the frequency as best as possible (Coarse) and Fine-tune again. After the
noise has been reduced, re-adjust the picture so that it is aligned with the center of screen.
Position: To adjust the PC’s screen position if it is not centered or does not fit the product screen. Press
the
or
button to adjust the Vertical Position. Press the
or
button to adjust the Horizontal
Position.
Image Reset: Resets the image to the default settings.
3.4
Auto Adjustment
메뉴 [m]
Picture
Auto Adjustment
[
]
Adjust frequency values/positions and fine tune the settings automatically.
This option is available when the input source is PC.
3 Screen Adjustment
57
3
3.5
Screen Adjustment
Advanced Settings
메뉴 [m]
Picture
Advanced Settings
[
]
All Advanced Settings are available in the Standard and Movie modes. To use, select an option using
the up and down arrow keys, and then press [
and then press [
]. Use the arrow keys to change the value or setting,
].
In PC mode, you can only make changes to Gamma and White Balance.
Advanced Settings
Dynamic Contrast
Off
Black Tone
Off
Flesh Tone
0
RGB Only Mode
Color Space
Off
Native
White Balance
Gamma
0
The displayed image may differ depending on the model.
3.5.1
Dynamic Contrast
Adjust the screen contrast.
z
3.5.2
Off / Low / Medium / High
Black Tone
Select the black level to adjust the screen depth.
z
3.5.3
Off / Dark / Darker / Darkest
Flesh Tone
Emphasize pink Flesh Tone.
3 Screen Adjustment
58
3
Screen Adjustment
3.5.4
RGB Only Mode
Displays the Red, Green and Blue color for making fine adjustments to the hue and saturation.
z
3.5.5
Off / Red / Green / Blue
Color Space
Adjusts the range and variety of colors (the color space) available to create images.
z
3.5.6
Auto / Native
White Balance
Adjust the color temperature for a more natural picture.
z
R-Offset / G-Offset / B-Offset: Adjust each color’s (red, green, blue) darkness.
z
R-Gain / G-Gain / B-Gain: Adjust each color’s (red, green, blue) brightness.
z
Reset: Resets the White Balance to its default settings.
3.5.7
Gamma
Adjust the primary color intensity.
3.5.8
Motion Lighting (Off / On)
Reduces power consumption by reducing screen brightness when the picture on the screen is in motion.
3.6
Picture Options
메뉴 [m]
Picture
Picture Options
Select an option using the
setting, and then press [
and
[
]
arrow keys, and the press [
]. Use the arrow keys to change the
].
In PC mode, you can only make changes to the Color Tone.
3 Screen Adjustment
59
3
Screen Adjustment
Picture Options
Color Tone
Standard
Digital Noise Filter
Auto
MPEG Noise Filter
Auto
HDMI Black Level
Low
Film Mode
Off
LED Motion Plus
Off
The displayed image may differ depending on the model.
3.6.1
Color Tone
Cool / Standard / Warm1 / Warm2
z
3.6.2
z
Warm1 or Warm2 will be deactivated when the Picture Mode is Dynamic.
z
Settings can be adjusted and stored for each external device connected to an input on the
product.
Digital Noise Filter
If the broadcast signal received by your product is weak, you can activate the Digital Noise Filter feature
to reduce any static and ghosting that may appear on the screen.
z
Off / Low / Medium / High / Auto / Auto Visualization
z
Auto Visualization: When changing analog channels, displays signal strength.
†
Only available for analog channels.
†
When bar is green, is that the best possible signal.
When the signal is weak, try all the options until the the product displays the best picture.
3 Screen Adjustment
60
3
Screen Adjustment
3.6.3
MPEG Noise Filter
Reduces MPEG noise to provide improved picture quality.
z
3.6.4
Off / Low / Medium / High / Auto
HDMI Black Level
Selects the black level on the screen to adjust the screen depth.
z
Normal / Low
Available only in HDMI mode.
3.6.5
Film Mode
Sets the product to automatically sense and process film signals from all sources and adjust the picture
for optimum quality.
z
Off / Auto1 / Auto2
Available in TV, AV, COMPONENT (480i / 1080i) and HDMI (480i / 1080i).
3.6.6
LED Motion Plus (Off / On)
Removes blur and judder from scenes with large amounts of rapid movement to provide a clearer
picture.
3.7
Reset Picture
메뉴 [m]
Picture
Reset Picture
[
]
Resets your current picture mode to its default settings.
3 Screen Adjustment
61
4
4.1
Sound Adjustment
Configure the sound (Sound) settings for the product.
Sound Mode
메뉴 [m]
Sound
Sound Mode
[
]
Use the up and down arrow keys to select an option, and then press [
].
Sound
Sound Mode
Standard
Sound Effect
Broadcast Audio Options
SPDIF Output
Speaker Settings
Reset Sound
The displayed image may differ depending on the model.
z
Standard: Selects the normal sound mode.
z
Music: Emphasizes music over voices.
z
Movie: Provides the best sound for movies.
z
Clear Voice: Emphasizes voices over other sounds.
z
Amplify: Increase the intensity of high-frequency sound to allow a better listening experience for the
hearing impaired.
If Speaker Select is set to External, Sound Mode is disabled.
4 Sound Adjustment
62
4
4.2
Sound Adjustment
Sound Effect
메뉴 [m]
z
z
Sound
Sound Effect
[
]
If Speaker Select is set to External, Sound Effect is disabled.
SRS TruSurround HD (Off / On)
This function provides a virtual 5.1 channel surround sound experience through a pair of speakers
using HRTF(Head Related Transfer Function) technology.
z
SRS TruDialog (Off / On)
This function allows you to increase the intensity of a voice over background music or sound effects
so that dialog can be heard more clearly.
z
Equalizer
The Equalizer displays a series of sliders. Use the up and down arrow keys to select a slider. Use the
left and right arrow keys to change the slider’s value. To Reset the Equalizer, select Reset and
press [
], then select Yes and press [
]. To exit, select Close, and then press [
].
Equalizer is available in the standard sound mode only.
†
Balance L/R: Adjusts the balance between the right and left speaker.
†
100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the level of specific
bandwidth frequencies.
†
Reset: Resets the equalizer to its default settings.
4 Sound Adjustment
63
4
4.3
Sound Adjustment
Broadcast Audio Options
메뉴 [m]
z
Sound
Broadcast Audio Options
[
]
Preferred Language
(digital channels only)
Use the up and down arrow keys to select a language, and then press [
].
Digital-TV broadcasts can simultaneously transmit many audio tracks (for example, simultaneous
translations of the program into foreign languages).
You can only select a language from among the ones being broadcasted.
z
Auto Stereo
(analog channels only)
If Auto Stereo is set to Auto, the audio is automatically switched to stereo or mono according to the
broadcast signal of the channel even if you change the channel.
†
Auto / Manual
If the sound quality of the stereo program is not good, switch the audio to mono.
z
Multi-Track Sound
(analog channels only)
Select an option using the up and down arrow keys, and the press [
†
].
Mono: Choose for channels that are broadcasting in mono or if you are having difficulty
receiving a stereo signal.
†
Stereo: Choose for channels that are broadcasting in stereo.
Depending on the program being broadcast, you can listen to Mono, Stereo, or SAP.
4 Sound Adjustment
64
4
4.4
Sound Adjustment
SPDIF Output
메뉴 [m]
Sound
SPDIF Output
[
]
SPDIF (Sony Philips Digital InterFace) is used to provide digital sound, reducing interference going to
speakers and various digital devices such as a DVD player.
z
Audio Format: You can select the Digital Audio output (SPDIF) format.
The available Digital Audio output (SPDIF) format may differ depending on the input source.
z
Audio Delay: Correct audio-video sync problems, when watching TV or video, and when listening to
digital audio output using an external device such as an AV receiver (0ms ~ 250ms).
4.5
Speaker Settings
메뉴 [m]
z
Sound
Speaker Settings
[
]
Speaker Select (External Speaker / TV Speaker)
If you are listening to the sound track of a broadcast or movie through an external receiver, you may
hear a sound echo caused by the difference in decoding speed between the TV’s speakers and the
speakers attached to your audio receiver. If this occurs, set the TV to External Speaker.
z
†
When you set Speaker Select to External Speaker, the TV’s speakers are turned off. You
will hear sound through the external speakers only. When the Speaker Select is set to
TV Speaker, both the product speakers and the external speakers are on. You will hear
sound through both.
†
If there is no video signal, both the TV’s speakers and the external speakers will be mute.
Auto Volume (Off / Normal / Night)
†
Normal: equalizes the volume level on each channel, so that when you change channels, the
volume level is the same.
†
Night: equalizes and decrease the volume level on each channel, so each channel is quieter.
Night is useful at night, when you may want to keep the volume low.
To use the volume control of a connected source device, set Auto Volume to Off. A change to the
volume control of the connected source device may not be applied if Auto Volume is set to
Normal or Night.
4 Sound Adjustment
65
4
4.6
Sound Adjustment
Reset Sound
메뉴 [m]
Sound
Reset Sound
[
]
Reset all sound settings to the factory defaults. Select Reset Sound, press [
up, and then press [
], select Yes in the pop-
] again.
4 Sound Adjustment
66
5
5.1
Using the Channel Menu
Channel
메뉴 [m]
Channel
[
]
This option is available when the input source is TV.
Channel
Antenna
Cable
Auto Program
Fine Tune
The displayed image may differ depending on the model.
5.1.1
Antenna (Air/Cable)
메뉴 [m]
Channel
Antenna
[
]
Before your television can begin memorizing the available channels, you must specify the type of signal
source that is connected to the LED display.
z
Air / Cable
5.1.2
Auto Program
Scan all frequencies for broadcast signals and store channels found.
z
The Auto Program operation takes about 6~7 minutes.
How to Stop Auto Programming
1
2
3
Press the ENTER [
] button.
A message will ask Stop Auto Program?
Select the Yes.
5 Using the Channel Menu
67
5
Using the Channel Menu
5.1.3
Fine Tune
메뉴 [m]
Channel
Fine Tune
[
]
(analog channels only)
If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the
search and store operation. If the signal is weak or distorted, fine tune the channel manually. Scroll to the
left or right until the image is clear.
z
Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of
the channel number in the channel banner.
z
To reset the fine-tuning, select Reset.
5 Using the Channel Menu
68
6
6.1
System
Setup
메뉴 [m]
System
Setup
[
]
Configure the channels and the time when setting up the product for the first time or when resetting the
unit.
System
Setup
Time
Menu Language
English
Eco Solution
Caption
On
Security
PIP
Off
The displayed image may differ depending on the model.
6 System
69
6
6.2
System
Time
메뉴 [m]
System
Time
[
]
You can configure Clock Set or Sleep Timer. You can also set the product to automatically turn on or off
at a specified time using the Timer function.
6.2.1
Clock
Set the clock to use the various various timer features of the product.
The current time will appear every time you press the 정보표시 button.
Changing the Setting for Clock
z
Clock Mode
Set the current time manually or automatically.
†
Auto: The TV sets the current time automatically using the time from a digital channel.
You must have cable or an antenna connected to the TV to set the time automatically.
†
z
Manual: Set the current time manually.
Clock Set
Set the Date and Time.
†
Select Clock Set. Select Date or Time, and then press [
]. Use the number buttons to enter
numbers or press the up and down arrow buttons. Use the left and right arrow buttons to move
from one entry field to the next. Press [
press [
6.2.2
] when done. To exit Clock Set, select Close, and then
].
-
Available only when Clock Mode is set to Manual.
-
You can set the Date and Time directly by pressing the number buttons on the remote
control.
Sleep Timer
Automatically shuts off the product after a preset period of time.
(Off, 30 min., 60 min., 90 min., 120 min., 150 min. and 180 min.)
To cancel Sleep Timer, select Off.
6 System
70
6
System
6.2.3
On Timer
Set On Timer so that your product turns on automatically at a time and on a day of your choosing.
z
On Timer: You can set up three separate On Timer configurations. (On Timer 1, On Timer 2,
On Timer 3)
You must set the clock before you can use On Timer.
†
Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual. If you select
Manual, you can choose the days you want On Timer to turn on your product.
The check mark indicates days you’ve selected.
†
Time: Set the hour and minute. Use the number buttons or the up and down arrow keys to
enter numbers. Use the left and right arrow buttons to change entry fields.
†
Volume: Set the desired volume level. Use the left and right arrow buttons to change the
volume level.
†
Source: Select the input source of your choice.
†
Antenna (when the Source is set to TV): Select Air or Cable.
†
Channel (when the Source is set to TV): Select the desired channel.
†
Music / Photo (when the Source is set to USB): Select a folder in the USB
device containing music or photo files you want played when the TV turns on automatically.
†
If there is no music file on the USB device or you don’t select a folder containing a music file,
the Timer function does not operate correctly.
†
If there is only one photo file in the USB, the Slide Show will not play.
†
If a folder name is too long, the folder cannot be selected.Each USB you use is assigned its
own folder. When using more than one of the same type of USB, make sure the folders
assigned to each USB have different names.
†
We recommend that you use a USB memory stick and a multi card reader when using
On Timer. The On Timer function may not work with USB devices with a built-in battery, MP3
players, or PMPs made by some manufacturers because the product can take too long to
recognize these devices.
6 System
71
6
System
6.2.4
Off Timer
You can set up three separate Off Timer configurations. (Off Timer 1, Off Timer 2, Off Timer 3)
You must set the clock before you can use Off Timer.
z
Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual. If you select
Manual, you can choose the days you want Off Timer to turn off your product.
The check mark indicates days you’ve selected.
z
6.3
Time: Set the hour and minute. Use the number buttons or the up and down arrow keys to enter
numbers. Use the left and right arrow buttons to change entry fields.
Menu Language
메뉴 [m]
System
Menu Language
[
]
Set the menu language.
A change to the language setting will only be applied to the onscreen menu display. It will not be applied
to other functions on your PC.
6 System
72
6
6.4
System
Eco Solution
메뉴 [m]
System
Eco Solution
[
]
Eco Solution
Energy Saving
Off
Eco Sensor
Off
No Signal Power Off
Auto Power Off
15 min.
Off
The displayed image may differ depending on the model.
6.4.1
Energy Saving
Save power with the Energy Saving feature.
While Energy Saving mode is active, the product power consumption will be controlled to save power.
Off / Low / Medium / High / Picture Off
z
6.4.2 Eco Sensor (Off / On)
To enhance your power savings, the picture settings will automatically adapt to the light in the room.
If you adjust Backlight in the Picture menu, Eco Sensor will be set to Off.
z
Min. Backlight: When Eco sensor is On, you can manually adjust the minimum screen brightness.
If Eco Sensor is On, the display brightness may change (become slightly darker or brighter) depending
on the surrounding light intensity. You can control the screen’s minimum brightness with the Min.
Backlight function.
6.4.3
No Signal Power Off
To avoid unnecessary energy consumption, you can set how long you want the product to remain on if
it’s not receiving a signal.
z
Off / 15 min. / 30 min. / 60 min.
z
Disabled when an attached PC is in power saving mode.
z
The default setting is 15 min. for this product.
6 System
73
6
System
The product will automatically power off at a specified time. The time can be changed as required.
z
6.4.4
Auto Power Off (Off / On)
The product will automatically turn off if you don’t press a button on the remote or touch a button on
product front panel within 4 hours to prevent overheating.
6.5
Caption
메뉴 [m]
6.5.1
System
Caption
[
]
Caption
You can switch the caption function on or off. If captions are not available, they will not be displayed on
the screen.
z
Off / On
The Caption feature does not work with devices connected to the product through the
Component, HDMI or PC input jacks.
6.5.2
Caption Mode
You can select the desired caption mode.
The availability of captions depends on the program being Broadcasted.
z
Default / English / Korean: (analog channels only) You can select Default, English or Korean. The
Default is Korean captions.
z
†
If the broadcasting station or video content does not provide caption data, no captions will be
displayed even when you select captions.
†
When you watch a DVD title, captions are only displayed when the DVD player is connected
to the AV jack.
†
If you watch a program with English captions in Korean caption mode, the displayed caption
characters may be broken. In this case, set the caption mode to English.
†
If you connect an external device (cable / satellite / digital broadcast receiver) to the HDMI or
Component jack, captions are not supported.
Default / Service 1~6: (digital channels only) You can select Service 1 toService 6.
Since, only Service 1 is supported by broadcasts in Korea, set it to Default or Service 1.
6 System
74
6
System
6.5.3
Caption Options
You can configure the size and color of the captions. Configure the following options and select Close.
To reset the option to the default of the broadcast, select Default at the bottom of the screen.
z
Size: Options include Default, Small, Standard and Large.
z
Font Color: You can change the color of the letters. Options include Default, White, Black, Red,
Green, Blue, Yellow, Magenta and Cyan. The default is White.
z
Background Color: You can change the background color of the caption. Options include Default,
White, Black, Red, Green, Blue, Yellow, Magenta and Cyan. The default is Black.
z
Font Opacity: This adjusts the opacity of text. Options include Default, Transparent, Translucent,
Solid and Flashing.
z
Background Opacity: This adjusts the opacity of the caption background. Options include Default,
Transparent, Translucent, Solid and Flashing.
z
Return to Default: This option sets each Size, Font Color, Background Color, Font Opacity and
Background Opacity to their default.
†
Digital Caption Options are available only when you can select Return to Default and
Service1 ~ Service 6 in Caption mode.
†
The availability of captions depends on the program being Broadcasted.
†
The Return to Default setting follows the standards set by the broadcaster.
†
You cannot set both the Font Opacity and the Background Opacity to the same color.
6 System
75
6
6.6
System
Security
메뉴 [m]
System
Security
[
]
The PIN input screen appears. Enter the 4 digit PIN.
The default PIN number for a new TV set is “0-0-0-0”.
Security
Channel Lock
Off
Change PIN
On
The displayed image may differ depending on the model.
6.6.1 Channel Lock (Off / On)
When turned on, the Channel Lock feature can automatically block programs that you deem
nappropriate for your children.
z
z
Available in TV mode only.
z
The default PIN number for a new product set is “0-0-0-0”.
If you forget the PIN, press the remote-control buttons in the following sequence, which resets the
pin to "0-0-0-0:" [
6.6.2
] (off)
조용히
8
2
4
[
] (on)
Change PIN
You can change the PIN. Enter a 4-digit PIN and then re-enter the PIN. The PIN is set to the new PIN.
6 System
76
6
6.7
System
PIP
메뉴 [m]
z
System
PIP
[
]
z
For PIP sound, refer to the Sound Select instructions.
z
If you turn the product off while watching in the PIP mode, the PIP function is reset to off. When you turn
your product on, you must turn PIP on again to watch in the PIP mode.
z
You may notice that the picture in the PIP screen becomes slightly unnatural when you use the main
screen to view a game or karaoke.
z
While Program Rating Lock is on, you cannot use PIP.
PIP Settings
The picture from the external video source will be in the main screen and the picture from the
product tuner will be in the PIP sub-picture screen.
Main picture
Sub picture
PC, Component, HDMI
TV
†
PIP (Off / On): Activate or deactivate the PIP function.
†
Channel: Select the channel for the sub-screen.
This option is enabled if the secondary display is set to TV.
†
Size (
,
): Select a size for the subpicture.
†
Position (
†
Sound Select (Main / Sub): You can choose to listen to the sound from the Main picture or the
,
,
,
): Select a position for the sub-picture.
Sub picture.
6.8
Auto Protection Time
메뉴 [m
System
Auto Protection Time
[
]
If the screen displays a still image for a certain period of time you define, the product activates the screen
saver to prevent the formation of burnt in ghost images on the screen.
z
Off / 2 hours / 4 hours / 8 hours / 10 hours
6 System
77
6
6.9
System
General
메뉴 [m]
System
General
[
]
General
Game Mode
Off
Auto Wall Mount
Panel Lock
Off
Boot Logo
On
The displayed image may differ depending on the model.
6.9.1
Game Mode (Off / On)
When you have connected a game console such as a PlayStation™ or Xbox™ to the TV, you can enjoy
a more realistic gaming experience if you set Game Mode on.
Precautions and limitations for game mode.
z
Game Mode is not available when the input source is set to TV or PC.
z
After connecting the game console, set Game Mode to On. Unfortunately, you may notice
reduced picture quality.
z
If Game Mode is On
- Picture mode is set to Standard and Sound mode is set to Movie.
6.9.2 Auto Wall Mount
Adjust tilt/swivel of TV auto stand with directional keys, so you can watch the screen more comfortably.
z
Wall Mount Adjustment
z
Centering Option
6.9.3
Penel Lock (Off / On)
Lock or unlock all the keys on the panel.
6.9.4
Boot Logo (Off / On)
Display Samsung logo when the Product is turned on.
6 System
78
6
System
6.10 Anynet+(HDMI-CEC)
메뉴 [m]
6.10.1
System
Anynet+(HDMI-CEC)
[
]
Anynet+(HDMI-CEC)
What is Anynet+?
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+
with your Samsung product remote. The Anynet+ system can be used only with Samsung devices that
have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+
logo on it.
z
You can only control Anynet+ devices using the product remote control, not the buttons on the
product.
z
The product remote control may not work under certain conditions. If this occurs, reselect the
Anynet+ device.
z
The Anynet+ functions do not operate with other manufacturers’ products.
z
For instructions explaining how to connect Anynet+ external devices, refer to the device’s user
manual You must connect an Anynet+ device using an HDMI cable. Some HDMI cables may not
support Anynet+ functions.
z
Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.
z
While in PIP mode, Anynet+ functions only when an AV device is connected as the primary display.
It does not work if the AV device is connected as a secondary display.
z
Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the
same type.
z
However, you can connect only one Anynet+ Home Theater. To connect an Anynet+ Home
Theate, connect the Home Theater to the product using an HDMI cable then.
6 System
79
6
System
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the
product.
Anynet+ Menu
View TV
Device List
Description
Changes Anynet+ mode to TV mode.
Shows the Anynet+ device list.
(device_name) MENU
Shows the menu of the connected device menus. E.g. if a DVD player is
connected, the disc menu of the DVD player will appear.
(device_name) Tools
Shows the tools menu of the connected device. E.g. if a DVD player is
connected, the tools menu of the DVD player will appear.
Depending on the device, this menu may not be available.
(device_name) Title Menu
Shows the title menu of the disc in the connected device. E.g. If a DVD
player is connected, the title menu of the movie in the DVD player will
appear.
Depending on the device, this menu may not be available.
Receiver
6.10.2
Sound is played through the Receiver.
Auto Turn Off (No / Yes)
Setting an Anynet+ Device to turn Off automatically when the product is turned off.
z
If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the product
powers off.
z
May not be enabled depending on the device.
Switching between Anynet+ Devices
1
2
Press the 간편메뉴 button, select Anynet+ (HDMI-CEC), and then press [
Select Device List, and then press the [
].
] button.
If you cannot find a device you want, select Refresh to refresh the list.
3
Select a device, and then press the [
] button. You can switch to the selected device.
The Device List menu appears only when you set Anynet+ (HDMI-CEC) to On in the System
menu.
z
Switching to the selected device may take up to 2 minutes. You cannot cancel the switching
operation while switching is in progress.
6 System
80
6
System
z
If you have selected an Anynet+ device by pressing the SOURCE button and then selecting
its input source, you cannot use the Anynet+ function. Make sure to switch to an Anynet+
device by using the Device List.
6.10.3 Receiver
You can listen to sound through a Receiver (i.e. Home Theater) instead of the product Speaker.
To listen to sound through a receiver, go to Receiver screen (System
Anynet+ (HDMI-CEC)
Receiver). Then select Receiver and set to On.
If your Receiver supports audio only, it may not appear in the device list.
Troubleshooting for Anynet+
Problem
Anynet+ does not work.
Possible Solution
z
Check if the device is an Anynet+ device. The Anynet+ system
supports Anynet+ devices only.
z
You can connect only one receiver (home theater).
z
Check if the Anynet+ device power cord is properly connected.
z
Check the Anynet+ device’s Video/Audio/HDMI cable
connections.
z
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+
setup menu.
z
Check whether the remote control is Anynet+ compatible.
z
Anynet+ doesn’t work in certain situations. (Searching channels,
operating Plug & Play (initial setup), etc.)
z
If you have removed and then reconnected the HDMI cable,
please make sure to search devices again or turn your product off
and on again.
I want to start Anynet+.
z
Check if the Anynet+ function of the Anynet device is set on.
z
Check if the Anynet+ device is properly connected to the product
and check if the Anynet+ (HDMI-CEC) is set to On in the
Anynet+ Setup menu.
z
Press the TOOLS button to display the Anynet+ menu and select
a menu you want.
I want to exit Anynet+.
z
Select View TV in the Anynet+ menu.
z
Press the SOURCE button on the product remote control and
select a non- Anynet+ device.
6 System
81
6
System
Problem
The message “Connecting
Anynet+ device...” appears on
the screen.
Possible Solution
z
You cannot use the remote control when you are configuring
Anynet+ or switching to a view mode.
z
Use the remote control after the product has completed Anynet+
configuration or has finished switching to Anynet+.
The Anynet+ device does not
play.
The connected device is not
displayed.
z
You cannot use the play function when Plug & Play (initial setup)
is in progress.
z
Check whether or not the device supports Anynet+ functions.
z
Check whether or not the HDMI cable is properly connected.
z
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+
setup menu.
z
Search Anynet+ devices again.
z
Anynet+ requires an HDMI connection. Make sure the device is
connected to your product with an HDMI cable.
z
Some HDMI cables may not support Anynet+ functions.
z
If the connection is terminated because there has been a power
failure or the HDMI cable has been disconnected, please repeat
the device scan.
6.11 DivX® Video On Demand
메뉴 [m]
System
DivX® Video On Demand
[
]
Shows the registration code authorized for the product. If you connect to the DivX web site and register
using that code, you can download the VOD registration file.
For more information about DivX® VOD, visit “http://vod.divx.com”.
6 System
82
7
7.1
Support
Self Diagnosis
Self Diagnosis might take few seconds, this is part of the normal operation of the LED display
Support
Self Diagnosis
Software Update
Contact Samsung
Contents Home
The displayed image may differ depending on the model.
7.1.1 Picture Test (Yes / No)
Use to check for picture problems.
z
Yes: If the test pattern does not appear or there is noise in the test pattern, select Yes. There may
be a problem with the LED display. Contact Samsung’s Call Center for assistance.
z
No: If the test pattern is properly displayed, select No. There may be a problem with your external
equipment. Please check your connections. If the problem persists, refer to the external device’s
user manual.
7.1.2 Sound Test (Yes / No)
Use the built-in melody sound to check for sound problems.
z
Yes: If you can hear sound only from one speaker or not at all during the sound test, select Yes.
There may be a problem with the LED display. Contact Samsung’s Call Center for assistance.
z
No: If you can hear sound from the speakers, select No. There may be a problem with your external
equipment. Please check your connections. If the problem persists, refer to the external device’s
user manual.
7.1.3 Signal Information
(digital channels only) An HD channel’s reception quality is either perfect or the channels are unavailable.
Adjust your antenna to increase signal strength.
7 Support
83
7
Support
7.1.4 Reset
All the settings will return to factory defaults.
7.2
Software Update
메뉴 [m]
Support
Software Update
[
]
The Software Update menu lets you upgrade your TV’s software to the latest version.
z
Current Version: This is the software version already installed in the TV.
Be careful not to turn off the power until the upgrade is complete. The TV will turn off and on
automatically after completing the software upgrade. When you upgrade software, all video and audio
settings you have made will return to their default settings. We advise you to write down your settings
so that you can easily reset them after the upgrade.
7.2.1
By USB
To perform a software update from a USB device, contact the customer service center.
7.2.2
z
Alternative Software
Alternative Software
The Alternative Software option lets you upgrade using a file the TV downloaded earlier, but you
decided not to install immediately, or a file downloaded by the TV in Standby Mode.
To upgrade By Alternative Software, follow these steps.
1
If upgrade software has been downloaded, you will see the software version number to the right of
Alternative Software.
2
3
4
Select Alternative Software, and then press the [
] button.
The TV displays a message asking if you want to upgrade. Select Yes. The TV begins the upgrade.
When the upgrade is complete, the TV turns off automatically, and then turns on.
7 Support
84
7
7.3
Support
Contact Samsung
메뉴 [m]
Support
Contact Samsung
[
]
View this information when your TV does not work properly or when you want to upgrade the software.
You can find information regarding our call centers and how to download products and software.
7 Support
85
7
7.4
Support
Contents Home
메뉴 [m]
Support
Contents Home
[
]
You can enjoy useful and various contents.
7.4.1 Channel List
You can see the channel list of the Added Channels and Favorites 1~5 items.
When you press the 채널목록 button on the remote control, Channel List screen will be displayed at
once.
Channel List
Added Ch.
1
1futech
2
24ore.tv
3
BBC World
4
Class News
5
Coming Soon
6
R4 DTT
No Information
ˆ1
C2
ˆ2
C4
Tools
Watch
Page
The displayed image may differ depending on the model.
z
All: Shows all currently available channels.
z
TV: Shows all currently available TV channels.
z
Radio: Shows all currently available radio channels.
z
Data/Other: Shows all currently available MHP or other channels.
z
Analog: Shows all currently available analog channels.
z
Favorites 1-5: Shows all favorite channels.
Using the control buttons with the Channel List.
z
(Tools): Displays the option menu.
z
(Ch. Mode / Channel): Move to the All, TV, Radio, Data/Other, Analog or Favorites 1-5.
z
(Watch / Information): Watches the channel you selected. / Displays details of the selected
program.
z
(Page): Move to next or previous page.
7 Support
86
7
Support
7.4.2
Guide
The EPG (Electronic Program Guide) information is provided by broadcasters. Using Program schedules
provided by broadcasters, you can specify Program you want to watch in advance so that the channel
automatically changes to the selected Program channel at the specified time. Program entries may
appear blank or out of date depending on a channel status.
Guide
Wed, Jan 4 1:36 am
IL MEDICO E LO STRGONE
DTV Air 6 R4 DTT
16:55 - 17:55
IL MEDICO E LO STREGONE - 2 TEMPO
5 Coming Soon
Channel View - All
Today
17:00
17:30
1
1futech
No Information
2
24ore.tv
No Information
3
BBC World
No Information
4
Class News
No Information
5
Coming Soon
No Information
6
R4 DTT
IL MEDICO E LO STREGONE
A Schedule Mgr C +24 Hours
D Ch. Mode
18:00
18:30
TG 4
GG
Information
No Information
Page
Watch
The displayed image may differ depending on the model.
z
A : Moves to the reserved programs in Schedule. Mgr.
z
B : Viewing the list of programs to be broadcasted before 24 hours.
z
: Viewing the list of programs to be broadcasted after 24 hours.
z
: Select the type of channels you want to display on the Channel List window.
z
: Displays details of the selected program.
z
: Move to previous or next page.
(Watch / Schedule)
z
†
When selecting the current program, you can watch the selected program.
†
When selecting the future program, you can reserve to watch the selected program.
To cancel the schedule, press the [
] button again and select Cancel schedule.
7 Support
87
7
Support
7.4.3
Media Play
Enjoy videos, photos, music files saved on a USB Mass Storage Class (MSC) device.
Media Play / Videos /
USB
There is no device connected.
Videos
Photos
Music
Return
The displayed image may differ depending on the model.
Connecting a USB Device
1
2
3
Turn on your Product.
Connect a USB device containing photo and music files to the USB jack on the side of the Product.
When USB is connected to the Product, popup window appears. Then you can select New Device
connected..
It might not work properly with unlicenced multimedia files.
Need-to-Know List before using Media Play.
z
MTP (Media Transfer Protocol) is not supported.
z
The file system supports FAT16, FAT32 and NTFS.
z
Certain types of USB Digital camera and audio devices may not be compatible with this
product.
z
Media Play only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage
Class Bulk-Only Transport device. Examples of MSC are Thumb drives, Flash Card Readers
and USB HDD (USB HUB are not supported). Devices should be connected directly to the
Product USB port.
z
USB (HDD) is not supported.
z
Before connecting your device to the product, please back up your files to prevent them from
damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss.
z
Do not disconnect the USB device while it is loading.
z
The higher the resolution of the image, the longer it takes to display on the screen.
z
The maximum supported JPEG resolution is 15360 x 8640 pixels.
z
For unsupported or corrupted files, the “Not Supported File Format” message is displayed.
z
MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital
Rights Management (DRM) is a technology that supports the creation, distribution and
7 Support
88
7
Support
management of the content in an integrated and comprehensive way, including the protection
of the rights and interests of the content providers, the prevention of the illegal copying of
contents, as well as managing billings and settlements.
z
If an over-power warning message is displayed while you are connecting or using a USB
device, the device may not be recognized or may malfunction. If the product has been no
input during time set in Auto Protection Time, the Screensaver will run.
z
A USB device that requires high power (more than 500mA or 5V) may not be supported.
z
The power-saving mode of some external hard disk drives may be released automatically
when connected to the product. If a USB extension cable is used, the USB device may not be
recognized or the files on the device may not be read.
z
If a USB device connected to the product is not recognized, the list of files on the device is
corrupted or a file in the list is not played, connect the USB device to the PC, format the
device and check the connection.
z
Media Play only supports sequential jpeg format.
Screen Display
Move to the desired file using the
/
/
/
buttons and then press the ENTER [
] button. The file is
played. Media Play screen may differ depending on the way to enter the screen.
Information:
You can ascertain the
selected device name,
contents mode, folder/file
name, page.
Media Play
/ Videos /
SUM / 500 Days of... .avi
1/15
Information:
You can ascertain the
name, size and created
date of the selected file.
πμ Page Move E Play T Tools R Return
File List Section:
You can confirm the
files and groups that are
sorted by category.
Operation Buttons:
- E Play: Plays the selected file.
- T Tools: Displays the option menu.
- R Return: Move to the previous step.
/ B CGPage Move: Move to up or down page.
7 Support
89
7
Support
Videos
Playing Video
1
2
Press the
Press the [
/
/
/
button to select the desired video in the file list.
] button or
(Play) button.
z
The selected file name is displayed on the top with its playing time.
z
If video time information is unknown, play time and progress bar are not displayed.
z
During video playback, you can search using
z
You can use
(REW) and
and
button.
(FF) buttons during playback.
In this mode, you can enjoy movie clips contained on a Game, but you cannot play the Game itself.
The displayed image may differ depending on the model.
7 Support
90
7
Support
Supported Subtitle Formats
External
Name
File extension
MPEG-4 Timed text
.ttxt
SAMI
.smi
SubRip
.srt
SubViewer
.sub
Micro DVD
.sub or .txt
SubStation Alpha
.ssa
Advanced SubStation Alpha
.ass
Powerdivx
.psb
Internal
Name
Container
Format
Xsub
AVI
Picture Format
SubStation Alpha
MKV
Text Format
Advanced SubStation Alpha
MKV
Text Format
SubRip
MKV
Text Format
MPEG-4 Timed text
MP4
Text Format
7 Support
91
7
Support
Supported Video Formats
File
Extension
Container
Resolution
Frame
rate
(fps)
Bit rate
(Mbps)
Audio Codec
DivX 3.11/4.x/
5.x/6.x
*.avi
*.mkv
MPEG4 SP /
ASP
*.asf
*.wmv
*.mp4
*.3gp
Video Codec
AVI
*.vro
MKV
*.mpg
ASF
*.mpeg
MP4
AC3
LPCM
1920 x 1080
ADPCM
30
(IMA, MS)
H.264 BP / MP /
HP
Motion JPEG
AAC
HE-AAC
640 x 480
8
WMA
Window Media
Video v9
DD+
MPEG
MPEG2
(MP3)
6~30
*.ts
3GP
*.tp
VRO
DTS Core
*.trp
VOB
G.711(A-Law,
*.mov
PS
*.flv
TS
1920 x 1080
μ-Law)
30
MPEG1
*.vob
*.svi
*.m2ts
*.mts
*.divx
Other Restrictions
z
Video content will not play, or not play correctly, if there is an error in the content or the container.
z
Sound or video may not work if the contents have a standard bit rate/frame rate above the
compatible Frame/sec listed in the table.
z
If the Index Table is in error, the Seek (Jump) function is not supported.
z
The menu can be displayed late if the video is over 10Mbps(bit rate).
z
Some USB/digital camera devices may not be compatible with the player.
Video Decoder
Supports up to H.264, Level 4.1
H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and
AVCHD are not supported.
Audio Decoder
WMA 10 Pro supports up to 5.1 channel and M2
profile. (LBR mode of M0 is not supported)
WMA lossless audio is not supported.
GMC is not supported.
7 Support
92
7
Support
Photos
Viewing a Photo (or Slide Show)
1
2
Press the
/
Press the [
/
/
button to select the desired photo in the file list.
] button.
z
During the slide show, all files in the file list will be displayed in order.
z
When you press the
z
During the slide show, you can adjust the slide show speed using
z
You can move to other file using
(Play) button in the file list, slide show will be started immediately.
or
(REW) or
(FF) button.
button.
Music files can be automatically played during the slide show if the Background Music On is set.
Media Play / Photos /
Cruzer... / Photos / 0801181... .JPG
7 / 1000
0801181247070.JPG
1.Jan.2012
663.0KB
1920 x 1080
Upper Folder
Play
Outils R Retour
The displayed image may differ depending on the model.
Supported Picture Formats
File Extension
Format
Resolution
*.jpg
JPEG
15360 x 8640
*.bmp
BMP
1920 x 1080
*.mpo
MPO
15360 x 8640
7 Support
93
7
Support
Music
Playing Music
Press the
Press the [
/
/
/
button to select the desired Music in the file list.
] or [
▶
] button.
To rewind or fast-forward during playback, press the [ ◀◀ ] or [
◀◀
1
2
]button.
z
Only displays the files with the file extension in following supported music formats list. Other file
extensions are not displayed, even if they are saved on the same USB device.
z
If the sound is abnormal when playing MP3 files, adjust the Equaliser in the Sound menu. (An
over-modulated MP3 file may cause a sound problem.)
Media Play / Music /
Cruzer... / Music / Music_01.mp3
Upper Folder
Music_01
Singer 1
Music_02
Singer 2
Music_03
Singer 3
Music_04
Singer 4
Music_05
Singer 5
Music_01
Music_06
Singer 6
Music_07
Singer 7
Singer 1
2003
Fallen
Other
Music_08
Singer 8
Music_09
Singer 9
2:36 / 5:00
Play
Tools
R Return
The displayed image may differ depending on the model.
Playing selected music
1
2
Press the 간편메뉴[
Select the desired music.
The
3
] button and select Selection Play.
c mark appears to the left of the selected files.
Press the 간편메뉴[
] button and select Selection Play.
You can select or deselect all music pressing the Select All / Deselect All.
7 Support
94
7
Support
Supported Music Formats
File Extension
Type
Codec
Remark
*.mp3
MPEG
MPEG1 Audio Layer 3
MPEG4
AAC
*.flac
FLAC
FLAC
Seek is not supported. Supports up to
2ch.
*.ogg
OGG
Vorbis
Supports up to 2ch.
WMA
WMA 10 Pro supports up to 5.1 channel
and M2 profile. (LBR mode of M0 is not
supported)
*.m4a
*.mpa
*.aac
*.3ga
*.wma
WMA
Videos / Photos / Music Play Option menu
Press the 간편메뉴[
Category
] button and you can make the following operations.
Operations
Title Search
You can move the other file directly.
Time Search
You can search the video using
and
button at one minute interval or entering
the number directly.
Videos
Photos
Music
c
c
It may not be supported depending
on the input source.
Repeat Mode
You can play media files repeatedly.
c
Picture Size
You can adjust the picture size to your
preference.
c
Picture Mode
You can adjust the picture setting.
c
c
Sound Mode
You can adjust the sound setting.
c
c
Audio language
You can change the audio language if the
video has more than one language.
c
Subtitle
You can set the subtitle On / Off.
c
7 Support
95
7
Support
Category
Subtitle Settings
Start Slide Show /
Stop Slide Show
Operations
Videos
You can play the video with subtitles. This
function only works if the subtitles are the
same file name as the video.
c
Photos
Music
You can start or stop a slide show.
c
You can select the slide show speed
during the slide show.
c
Background Music
On / Background
Music Off
You can set on/off background music
when watching a slide show.
c
Background Music
Setting
You can select background music when
watching a Slide Show.
c
Zoom
You can zoom into images in full screen
mode.
c
Rotate
You can rotate images in full screen mode.
c
Edit playlist
You can edit the playlist when playing the
desired music.
c
Selection Play
Select and play multiple files.
c
Information
You can see detailed information about
the played file.
Slide Show Speed
c
c
c
7 Support
96
7
Support
7.4.4
Schedule Manager
You can set a desired channel to be displayed automatically at the intended time. In addition, you can
view, modify or delete a channel you have reserved to watch. Set the current time first to use this
function.
Using Option Menu
Set each channel using the menu options (Cancel schedule, Edit Schedule, Manually Schedule, View
Guide).
1
2
Press the 간편메뉴 button to select the Schedule manually.
Press the
/
/
/
or number buttons to set the Antenna, Channel, Repeat, Date, Start Time.
z
Antenna: Select the desired broadcasting signal.
z
Channel: Select the desired channel.
z
Repeat: Select Once, Manual, Sat~Sun, Mon~Fri or Everyday to set at your convenience. If
you select Manual, you can set the day you want.
z
Date: You can set the desired date.
z
Start Time: You can set the start time you want.
If you want to edit or cancel the schedule, select the reserved schedule on the Booking List. Press the
간편메뉴 button, then select the Edit Schedule or Cancel schedule.
7 Support
97
7
Support
7.4.5 Source
Source allows you to select a variety of sources and change source device names.
You can display the screen of a source device connected to the product. Select a source from Source
List to display the screen of the selected source.
The input source can also be changed by using the TV/외부입력 button on the remote control.
Edit Name
메뉴 [m]
[
Support
Contents Home
Source
간편메뉴
Edit Name
]
You can rename a connected source device.
z
Sometimes the screen will not display properly unless the name of a source device is specified in
Edit Name. In addition, it is best to rename the source device in Edit Name to obtain optimal picture
quality.
The list can include the following source devices. Source devices on the list differ depending on the
selected source.
†
VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder /
PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA
Available settings in the Picture menu depend on the current source and settings made in Edit Name.
z
When connecting a PC to the HDMI IN1 (DVI) port with HDMI cable, you should set the product to
PC mode under Edit Name.
z
When connecting a PC to the HDMI IN1 (DVI) port with HDMI to DVI cable, you should set the
product to DVI PC mode under Edit Name.
z
When connecting an AV devices to the HDMI IN1 (DVI) port with HDMI to DVI cable, you should set
the product to DVI Devices mode under Edit Name.
7 Support
98
7
Support
Information
메뉴 [m]
[
Support
Contents Home
Source
간편메뉴
Information
]
You can see detailed information about the selected external device.
Refresh
메뉴 [m]
Support
Contents Home
Source
간편메뉴
Refresh
[
]
In the Source, If the external devices are not displayed, press the 간편메뉴 button to select Refresh.
Search for connected devices.
7 Support
99
8
8.1
Troubleshooting Guide
Requirements Before Contacting Samsung Customer
Service Center
8.1.1 Testing the Product
Before calling Samsung Customer Service Center, test your product as follows. If the problem persists,
contact Samsung Customer Service Center.
Check if your product is operating normally by using the product test function.
If the screen remains blank while the power LED blinks even when the product is correctly connected to
a PC, perform product testing.
1
2
3
4
Power off both the PC and product.
Disconnect all the cables from the product.
Power on the product.
If "No Signal" is displayed, the product is operating normally.
If the screen remains blank, check the PC system, video controller and cable.
8.1.2 Checking the Resolution and Frequency
"Not Optimum Mode" will briefly be displayed if a mode that exceeds a supported resolution is selected
(refer to Supported Resolutions).
8 Troubleshooting Guide
100
8
Troubleshooting Guide
8.1.3 Check the followings.
Installation issue (PC mode)
The screen keeps switching on and off.
Check the cable connection between the
product and PC, and ensure the connection is
secure.
(product)
Blank spaces are found at the top and bottom
of the screen when an HDMI or HDMI-DVI
cable is connected to the product and PC.
Blank spaces on the screen are not caused by
the product.
The cause of the problem is the PC or graphics
card, and can be fixed by adjusting the screen
size in the HDMI or DVI option of the graphics
card settings menu.
If the graphics card settings menu has no
option to adjust the screen size, update the
graphics card driver to the latest version.
(Please contact the graphics card or computer
manufacturer for details on how to adjust the
screen settings.)
Screen issue
The power LED is off. The screen will not
switch on.
Make sure that the power cord is connected.
"No Signal" is displayed on the screen
(refer to "Connecting to a PC").
Check that the product is connected correctly
with a cable
(product)
(product)
Check that the device connected to the
product is powered on.
"Not Optimum Mode" is displayed.
This message is displayed when a signal from
the graphics card exceeds the product's
maximum resolution and frequency.
Refer to the Standard Signal Mode Table and
set the maximum resolution and frequency
according to the product specifications.
The images on the screen look distorted.
Check the cable connection to the product
(product)
8 Troubleshooting Guide
101
8
Troubleshooting Guide
Screen issue
The screen is not clear. The screen is blurry.
Adjust Coarse and Fine.
Remove any accessories (video extension
cable, etc) and try again.
Set the resolution and frequency to the
recommended level.
The screen appears unstable and shaky.
There are shadows or ghost images left on the
screen.
Check that the resolution and frequency of the
PC and graphics card are set within a range
compatible with the product. Then, change the
screen settings if required by referring to the
Additional Information on the product menu
and the Standard Signal Mode Table.
The screen is too bright. The screen is too
dark.
Adjust Brightness and Contrast.
Screen color is inconsistent.
Go to Picture and adjust the Color Space
settings.
White does not really look white.
Go to Picture and adjust the White Balance
settings.
There is no image on the screen and the power
LED blinks every 0.5 to 1 second.
The product is in power-saving mode.
Press any key on the keyboard or move the
mouse to return to the previous screen.
Sound issue
There is no sound.
Check the connection of the audio cable or
adjust the volume
(product)
Check the volume.
The volume is too low.
Adjust the volume.
If the volume is still low after turning it up to the
maximum level, adjust the volume on your PC
sound card or software program.
8 Troubleshooting Guide
102
8
Troubleshooting Guide
Remote control issue
The remote control does not work.
Make sure that the batteries are correctly in
place (+/-).
Check if the batteries are flat.
Check for power failure.
Make sure that the power cord is connected.
Check for any special lighting or neon signs
switched on in the vicinity.
Source device issue
A beeping sound is heard when my PC is
booting.
If a beeping sound is heard when your PC is
booting, have your PC serviced.
8 Troubleshooting Guide
103
8
8.2
Troubleshooting Guide
Q&A
Question
How can I change the
frequency?
Answer
Set the frequency on your graphics card.
z
"Windows XP": Go to Control Panel
Themes
Display
Settings
Appearance and
Advanced
Monitor and adjust the frequency in Monitor Settings.
z
"Windows ME/2000": Go to Control Panel
Settings
Advanced
Display
Monitor and adjust the
frequency in Monitor Settings.
z
"Windows Vista": Go to Control Panel
Personalization
Advanced Settings
Personalize
Appearance and
Display Settings
Monitor and adjust the frequency in
Monitor Settings.
z
"Windows 7": Go to Control Panel
Personalization
Advanced Settings
Display
Appearance and
Adjust resolution
Monitor and adjust the frequency in
Monitor Settings.
8 Troubleshooting Guide
104
8
Troubleshooting Guide
Question
How can I change the
resolution?
Answer
z
"Windows XP": Go to Control Panel
Themes
z
Display
Appearance and
Settings and adjust the resolution.
"Windows ME/2000": Go to Control Panel
Display
Settings and adjust the resolution.
z
"Windows Vista": Go to Control Panel
Personalization
Personalize
Appearance and
Display Settings and
adjust the resolution.
z
"Windows 7": Go to Control Panel
Personalization
Display
Appearance and
Adjust Resolution and
adjust the resolution.
How do I set power-saving
mode?
z
Windows XP: Set power-saving mode in Control Panel
Appearance and Themes
Display
Screen Saver
Settings or BIOS SETUP on the PC.
z
Windows ME/2000: Set power-saving mode in Control
Panel
Display
Screen Saver Settings or BIOS
SETUP on the PC.
z
Windows Vista: Set power-saving mode in Control Panel
Appearance and Personalization
Personalize
Screen Saver Settings or BIOS SETUP on the PC.
z
Windows 7: Set power-saving mode in Control Panel
Appearance and Personalization
Personalize
Screen Saver Settings or BIOS SETUP on the PC.
Refer to the user manual for your PC or graphics card for further instructions on adjustment.
8 Troubleshooting Guide
105
9
9.1
Specifications
General
Model Name
Panel
Size
Dimensions (W x H x D)
(Without Stand)
Dimensions (W x H x D)
(With Stand)
Weight
(Without Stand)
Weight
(With Stand)
Optimum resolution
H32B
H40B
32 inches (80 cm)
40 inches (101 cm)
738.8 x 436.7 x 93.3 mm
927.6 x 551.0 x 93.0 mm
738.8 x 493.3 x 191.7 mm
927.6 x 606.5 x 227.6 mm
5.8 kg
8.9 kg
6.4 kg
10.9 kg
1366 x 768 @ 60 Hz
1920 x 1080 @ 60 Hz
Audio Output
Operating
Environmental
considerations
Storage
10 W + 10 W
Temperature: 50˚F ~ 104˚F (10˚C ~ 40˚C)
Humidity : 10 % ~ 80%, non-condensing
Temperature: -4˚F ~ 140 ˚F (-20˚C ~ 60˚C)
Humidity : 5% ~95 %, non-condensing
Plug-and-Play : This product can be installed and used with any Plug-and-Play compatible systems.
Two-way data exchange between the product and PC system optimizes the product settings. Product
installation takes place automatically. However, you can customize the installation settings if desired.
Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may
appear brighter or darker on the panel. This does not affect product performance.
This device is a Class B digital apparatus.
9 Specifications
106
9
9.2
Specifications
PowerSaver
The power-saving function of this product reduces power consumption by switching off the screen and
changing the color of the power LED if the product is not used for a specified period of time. The power
is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or
move the mouse. Power-savign mode only functions when the product is connected to a PC with a
power-saving function.
Normal Operation
State
Rating
Power Indicator
Power
Consumption
Typical
Off
Power off
(Power Button)
On
H32B
54 W
26 W
less than 0.3
H40B
87 W
39 W
watts
Power Supply
100 ~ 240 V
z
The displayed power consumption level can vary in different operating conditions or when settings
are changed.
z
SOG (Sync On Green) is not supported.
z
To reduce the power consumption to 0, disconnect the power cord. Disconnect the power cable if
you will not be using the product for an extended period of time (during vacation, etc.).
9 Specifications
107
9
9.3
Specifications
Preset Timing Modes
z
This product can be set to only one resolution for each screen size to obtain the optimum picture
quality due to the nature of the panel. Using a resolution other than the specified resolution may
degrade the picture quality. To avoid this, it is recommended that you select the optimum
resolution specified for your monitor.
z
Check the frequency when you exchange a CDT monitor (connected to a PC) for an LCD monitor.
If the LCD monitor does not support 85Hz, change the vertical frequency to 60Hz using the CDT
monitor before you exchange it with the LCD monitor.
The screen will automatically be adjusted if a signal that belongs to the following standard signal modes is
transmitted from your PC. If the signal transmitted from the PC does not belong to the standard signal
modes, the screen may be blank with the power LED on. In such a case, change the settings according
to the following table by referring to the graphics card user manual.
Display Mode
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel
Clock
(MHz)
Sync
Polarity
(H/V)
H32B
H40B
IBM, 640 x 350
31.469
70.086
25.175
+/-
c
c
IBM, 720 x 400
31.469
70.087
28.322
-/+
c
c
MAC, 640 x 480
35.000
66.667
30.240
-/-
c
c
MAC, 832 x 624
49.726
74.551
57.284
-/-
c
c
MAC, 1152 x 870
68.681
75.062
100.000
-/-
VESA, 640 x 480
31.469
59.940
25.175
-/-
c
c
VESA, 640 x 480
37.861
72.809
31.500
-/-
c
c
VESA, 640 x 480
37.500
75.000
31.500
-/-
c
c
VESA, 800 x 600
37.879
60.317
40.000
+/+
c
c
VESA, 800 x 600
48.077
72.188
50.000
+/+
c
c
VESA, 800 x 600
46.875
75.000
49.500
+/+
c
c
VESA, 1024 x 768
48.363
60.004
65.000
-/-
c
c
VESA, 1024 x 768
56.476
70.069
75.000
-/-
c
c
VESA, 1024 x 768
60.023
75.029
78.750
+/+
c
c
c
9 Specifications
108
9
Specifications
Display Mode
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel
Clock
(MHz)
Sync
Polarity
(H/V)
VESA, 1152 x 864
67.500
75.000
108.000
+/+
VESA, 1280 x 720
45.000
60.000
74.250
+/+
VESA, 1280 x 800
49.702
59.810
83.500
-/+
c
VESA, 1280 x 1024
63.981
60.020
108.000
+/+
c
VESA, 1280 x 1024
79.976
75.025
135.000
+/+
c
VESA, 1366 x 768
47.712
59.790
85.500
+/+
VESA, 1440 x 900
55.935
59.887
106.500
-/+
c
VESA,1600 x
900(RB)
60.000
60.000
108.000
+/+
c
VESA, 1680 x 1050
65.290
59.954
146.250
-/+
c
VESA, 1920 x 1080
67.500
60.000
148.500
+/+
c
H32B
H40B
c
c
c
c
c
Horizontal Frequency
The time required to scan a single line from the left to the right side of the screen is called a horizontal
cycle. The reciprocal number of a horizontal cycle is called horizontal frequency. Horizontal frequency is
measured in kHz.
Vertical Frequency
The product displays a single image multiple times per second (like a fluorescent light) to display what
the viewer sees. The rate of a single image being displayed repeatedly per second is called vertical
frequency or refresh rate. Vertical frequency is measured in Hz.
9 Specifications
109
9
9.4
Specifications
License
TheaterSound HD, SRS and
symbol are trademarks of SRS Labs, Inc.
TheaterSound HD technology is incorporated under license form SRS Lab,
Inc.
SRS TheaterSound™ provides the most immersive surround sound
experience from the product built-in speakers, while maintaining steady
volume and delivering rich bass and clear dialog.
Manufactured under license from Dolby Laboratories. Dolby and the doubleD symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents
issued & pending. DTS and the Symbol are registered trademarks. & DTS
2.0+ Digital Out and the DTS logos are trademarks of DTS, Inc. Product
Includes software.
¯
DTS, Inc. All Rights Reserved.
DivX Certified ´ to play DivX ´ video up to HD 1080p, including premium
content.
DivX ´ , DivX Certified ´ and associated logos are trademarks of DivX, Inc.
and are used under license.
ABOUT DIVX VIDEO: DivX ´ is a digital video format created by DivX, Inc. This is an official
DivX Certified ´ device that plays DivX video. Visit www.divx.com for more information and
software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified ´ device must be registered in order to
play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate
the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on
how to complete your registration.
Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710;
7,519,274 DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or
its subsidiaries and are used under license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered trademarks of HDMI Licensing
LLC in the United States and other countries.
Open source license notice
In the case of using open source software, Open Source license are available on the product
menu.
Open Source License Notice is written only English.
9 Specifications
110
Appendix
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care center.
Customer Care Center 1588-3366
Web : www.samsungsvc.co.kr
Customer Service Center
Our Samsung Customer Service Center is striving to provide you with the best possible customer service
to meet your diverse needs through advanced technology, effective communication, and a useful
customer service system.
The phone number and address are subject to change without notice.
Call Samsung Customer Service Center at 1588-3366 from anywhere in Korea
Our friendly operators are always here to assist you.
Let us serve you more efficiently by giving us the model, serial number, condition of your product and
your contact details.
Samsung Customer Service Center website: http://www.samsungsvc.co.kr
Visit our cyber customer service center to book a service at your desired time or consult our operators
in real-time.
Customer Complaints
02-541-3000, 080-022-3000
[Certified as a Korean Company of Excellent Service Quality]
Recognition of excellent after-sales service quality by the Korean Agency for
Technology and Standards of the Ministry of Knowledge Economy
Appendix
111
Appendix
Responsibility for the Pay Service (Cost to Customers)
When the service is requested, in spite of in warranty, we may charge you for a visit from a service
technician in the following cases.
Not a product defect
Cleaning of the product, Adjustment, Explanation, Re-installation and etc.
z
If a service technician gives instructions on how to use product or simply adjusts options without
disassembling product.
z
If a defect is caused by external environmental factors. (Internet, Antenna, Wired Signal, etc.)
z
If a product is reinstalled or devices are connected additionally after installing the purchased product
for the first time.
z
If a product is reinstalled to move to a different spot or to move to a different house.
z
If customer requests instructions on how to use because of another company's product.
z
If customer requests instructions on how to use the network or another company's program.
z
If customer requests software installation and setup for the product.
z
If a service technician removes/cleans dusts or foreign materials inside of the product.
z
If customer requests an installation additionally after purchasing a product through home-shopping
or online.
A Product damage caused by customer's fault
Product damage caused by customer's mishandling or wrong repair.
If a product damage is caused by;
z
external impact or drop .
z
use of supplies or separatly sold product unspecified by Samsung.
z
repair from a person besides an engineer of outsourcing service company or partner of Samsung
Electronics Co., Ltd.
z
remodeling or repairing the product by customer.
z
using it with incorrect voltage or non-authorised electrical connections.
z
not following the "cautions" in User Manual.
Others
z
If product fails by natural disaster. (lightning, fire, earthquake, flood damage, etc)
z
If consumable components are all used up. (Battery, Toner, Fluorescent lights, Head, Vibrator,
Lamp, Filter, Ribbon, etc.)
Appendix
112
Appendix
If customer requests a service in case the product has no defect, service fee may be charged. So
please read User Manual first.
Appendix
113
Appendix
Optimum Picture Quality and Afterimage Burn-in Prevention
Optimum Picture Quality
z
To enjoy the optimum picture quality, go to Control Panel on your PC and adjust the resolution and
refresh rate as follows. The picture quality of TFT-LCDs may degrade if the optimum resolution is not
selected.
†
Resolution:
H32B: 1366 x 768
H40B 1920 x 1080
†
z
Vertical frequency (refresh rate): 60~75 Hz
Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may
be brighter or darker on the panel. This does not affect product performance.
†
The number of sub-pixels by panel type:
H32B: 3,147,264
H40B: 6,220,800
z
Run Auto Adjustment to improve the picture quality. If noise is still found even after auto
adjustment, adjust Coarse or Fine.
z
Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage
burn-in or defective pixels.
†
Activate power-saving mode or a dynamic screen saver if you will not be using the product for
an extended period of time.
z
Unlike CDT monitors, TFT-LCD monitors (due to the nature of the panel) can be set to only one
resolution to obtain the optimum picture quality. Therefore, setting a resolution other than the
specified resolution may degrade the picture quality. To avoid this, it is recommended that you select
the optimum resolution specified for your monitor.
Appendix
114
Appendix
Prevention of Afterimage Burn-in
What is afterimage burn-in?
Afterimage burn-in should not occur when the LCD panel is operating normally. Normal operation refers
to a continuously changing video pattern. If the LCD panel displays a fixed pattern for an extended period
of time (more than 12 hours), a slight voltage difference may occur between the electrodes in pixels that
control the liquid crystals.
Such a voltage difference between electrodes increases with time and makes the liquid crystals thinner.
When this occurs, a previous image can remain on the screen when the pattern changes. To prevent this,
the accumulated voltage difference should be reduced.
Black Matrix
Source
Color-Filter
Drain
Gate
{m{
Common
Electrode (ITO)
Pixel Electrode (ITO)
Storage
Capaccitor (Cs)
Data Bus-Line
Appendix
115
Appendix
z
Powering Off, Screen Saver and Power Saving Mode
†
Power off the product for 2 hours after using it for 12 hours.
†
Go to Display Properties > Power Supply on your PC and set the product to power off as
required.
†
Using a screen saver is recommended.
It is best to use a single-color or moving-image screen saver.
z
Regular Color Change
Type 1
Type 2
FLIGHT
TIME
FLIGHT
TIME
OZ348
20:30
OZ348
20:30
UA102
21:10
UA102
21:10
Use 2 colors
Switch between 2 colors every 30 minutes as shown above.
z
Avoid combinations of a text color and background color of contrasting brightness.
Avoid using grey as it may contribute to afterimage burn-in.
Avoid using colors of contrasting brightness (black and white; grey).
z
FLIGHT : TIME
FLIGHT : TIME
OZ348 : 20:30
OZ348 : 20:30
Regular Text Color Change
†
Use bright colors of similar brightness.
Interval: Change text color and background color every 30 minutes
FLIGHT : TIME
OZ348
†
: 20:30
OZ348
: 20:30
FLIGHT : TIME
OZ348
: 20:30
FLIGHT : TIME
OZ348
: 20:30
Move and change text every 30 minutes as shown below.
FLIGHT
: TIME
FLIGHT
: TIME
OZ348
: 20:30
OZ348
: 20:30
[ Step 1 ]
†
FLIGHT : TIME
[ Step 2 ]
[ Step 3 ]
Regularly display a moving image along with a logo.
Interval: Display a moving image along with a logo for 60 seconds after using for 4 hours.
†
The best way to protect the product from afterimage burn-in is switching the power off or
setting the PC or system to run a screen saver when not in use. Also, Warranty service may be
limited depending on instruction guide.
Appendix
116
Appendix
Recycling
Please dispose of electronic products as follows for environmental protection and recycling.
Free Disposal
When you purchase a new Samsung product from an authorized dealer, we can pick up your old product
for disposal when the new product is delivered.
Paid Disposal
To dispose of an old product without purchasing a new one, contact your local administrative office.
ᵝၝᖝ░
ḡᱶᰆᗭ
Appendix
117
Appendix
Samsung's Green Management
Samsung Electronics launched an environmental management system
called Green Management in May 1996 after declaring an environmental
plan in June 1992 with the aim to prevent environmental pollution and
continuously improve the environment.
Samsung's green management sets the environment, safety and health
as the core elements of its business activities to create a rich life for the
humanity and actively take part in environmental conservation.
Appendix
118
Appendix
Terminology
Dot Pitch
The monitor and screen consist of red, green and blue dots. A shorter distance between the dots
produces a higher resolution. Dot pitch refers to the distance between the shortest distance between
dots of the same color. Dot pitch is measured in millimeters.
Vertical Frequency
The monitor displays a single image many times per second (like a fluorescent light that flickers) to
display an image for a viewer to see. The rate of a single image being displayed repeatedly per second
is called vertical frequency or refresh rate. Vertical frequency is measured in Hz.
E.g. 60Hz refers to a single image being displayed 60 times in one second.
Horizontal Frequency
The time required to scan a single line from the left to the right side of the screen is called a horizontal
cycle. The reciprocal number of a horizontal cycle is called horizontal frequency. Horizontal frequency
is measured in kHz.
Plug & Play
Plug & Play is a function that allows the automatic exchange of information between a monitor and PC
to produce an optimum display environment. The product uses VESA DDC (international standard) to
execute Plug & Play.
Resolution
Resolution is the number of horizontal dots (pixels) and vertical dots (pixels) that form a screen. It
represents the level of display detail. A higher resolution enables more data to be displayed on the
screen and is useful to perform multiple tasks simultaneously.
E.g. A resolution of 1920 X 1080 consists of 1,920 horizontal pixels (horizontal resolution) and 1,080
vertical pixels (vertical resolution).
DVD(Digital Versatile Disc)
DVD refers to a CD-sized mass storage disk where you can save multimedia (audio, video or game)
applications using MPEG-2 video compression technology.
HDMI(High Definition Multimedia Interface)
It is an interface that can be connected to a digital audio source as well as a high-definition video
source by using a single cable without compression.
Appendix
119
Appendix
Component ports (green, blue and red)
The component ports, which identify, transmit and receive contrast signals, provide superior picture
quality to any other video connection methods.
Stereo
Stereo refers to a technology that outputs audio signals via two channels. It delivers 3D sound
experience through separate left and right audio channels over two speakers.
Source
Input source refers to a video source device connected to the product such as a camcorder or video
or DVD player.
480i / 480p / 720p / 1080i / 1080p
Each of the scanning rates above refers to the number of effective scanning lines that decides the
screen resolution. The scanning rate may be indicated in i (interlaced) or p (progressive), depending
on the scanning method.
- Scanning
Scanning refers to a process of sending pixels that form an image progressively. A larger number of
pixels will deliver a clearer and more vivid picture.
- Progressive
In progressive scan mode, all lines of pixels are scanned one by one (progressively) on the screen.
- Interlaced
In interlaced scan mode, every other line of pixels is scanned from top to bottom first and then the
remaining lines of pixels (that were not scanned) are scanned.
Appendix
120
Index
A
N
Antenna 51
No Signal Power Off 73
Antenna (Air/Cable) 67
Anynet+(HDMI-CEC) 79
Appendix 111
Auto Program 67
P
PC connection 44
Picture Mode 53
Picture Size 55
B
PIP 77
Batteries 27
Port 24
Problem report 100
C
Caption 74
R
Change PIN 76
Remote Control 26
Contents Home 86
Resolution configuration 46
Custom settings screen 54
S
E
Screen Adjustment 55
Eco Solution 73
Self Diagnosis 83
Edit Name 98
Setup 69
Energy Saving 73
Sleep Timer 70
Software Upgrade 84
F
Standard 53
Fine Tune 68
V
G
Video connection 48
Game Mode (Off / On) 78
I
Items sold separately 21
M
Menu Language 72
Index
121
Download PDF