Samsung | DM82D | Samsung DM82D 사용자 매뉴얼

User Manual
DM82D
The color and the appearance may differ depending on the product,
and the specifications are subject to change without prior notice to
improve the performance.
Table of contents
Before Using the Product
Using MDC
Screen Adjustment
»»Copyright
»»MDC Program Installation/Uninstallation
»»Picture Mode
»»Safety Precautions
»»Connecting to MDC
»»Backlight / Contrast / Brightness / Sharpness /
Color / Tint (G/R)
»»Color Temperature
Preparations
Home feature
»»White Balance
»»Gamma
»»Parts
»»Player
»»Calibrated Value
»»Before Installing the Product (Installation
Guide)
»»Schedule
»»Advanced Settings
»»Template
»»Dimensions
»»Picture Options
»»Clone Product
»»Installing the Wall Mount
»»Picture Size
»»ID Settings
»»Remote Control (RS232C)
»»Auto Adjustment
»»Video Wall
»»PC Screen Adjustment
»»Network Status
»»Picture Off
»»Picture Mode
»»Reset Picture
Connecting and Using a Source
Device
»»Before Connecting
»»Connecting to a PC
»»On/Off Timer
»»Ticker
»»More settings
»»URL Launcher
OnScreen Display
»»PIP
»»Connecting to a Video Device
»»Rotation
»»Connecting to an Audio System
»»Screen Protection
»»Connecting the antenna
»»Message Display
»»Connecting the LAN Cable
»»Menu Transparency
»»Connecting the network box (Sold separately)
»»Menu Language
»»Changing the Input source
»»Caption
»»Reset OnScreen Display
Table of contents
Sound Adjustment
Network
Support
»»Sound Mode
»»Network Status
»»Software Update
»»Sound Effect
»»Network Settings
»»Contact Samsung
»»HDMI Sound
»»Wi-Fi Direct
»»Go to Home
»»Sound on Video Call
»»Multimedia Device Settings
»»Reset All
»»Speaker Settings
»»Screen Mirroring
»»Auto Volume
»»Server Network Settings
»»Reset Sound
»»Device Name
Broadcasting
System
»»Auto Program
»»Setup
»»Antenna
»»Time
»»Channel List
»»Auto Source Switching
»»Edit Channel
»»Power Control
»»Edit Favorites
»»Eco Solution
»»Audio Options
»»Temperature Control
»»Program Rating Lock
»»Device Manager
»»Channel Settings
»»Play via
»»Change PIN
»»General
»»Reset System
Playing photos, videos and
music (Media Play)
»»Features provided in the media content list
page
»»Available buttons and features during photo
playback
»»Available buttons and features during video
playback
»»Available buttons and features during music
playback
»»Supported Subtitle and Media play file
formats
Table of contents
Troubleshooting Guide
»»Requirements Before Contacting Samsung
Customer Service Center
»»Q & A
Specifications
»»General
»»PowerSaver
»»Preset Timing Modes
Appendix
»»Responsibility for the Pay Service
(Cost to Customers)
»»Optimum Picture Quality and Afterimage
Burn-in Prevention
»»License
»»Terminology
Before Using the Product
Copyright
The contents of this manual are subject to change without notice to improve quality.
© 2014 Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.
Microsoft, Windows are registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Ownership of all other trademarks is attributed to their due owner.
Safety Precautions
Cleaning
――Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
Caution
――Take the following steps when cleaning.
――The following images are for reference only. Real-life situations may differ from what is shown in the
images.
RISK OF ELECTRIC SHOCK DO NOT OPEN
Caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. (OR BACK)
THERE ARE NO USER SERVICEABLE PARTS INSIDE.
REFER ALL SERVICING TO QUALIFIED PERSONNEL.
1
Power off the product and computer.
2
Disconnect the power cord from the product.
――Hold the power cable by the plug and do not touch the cable with wet
hands. Otherwise, an electric shock may result.
This symbol indicates that high voltage is present inside.
3
It is dangerous to make any kind of contact with any internal part of this product.
Wipe the product with a clean, soft and dry cloth.
•• Do not use detergents that contain alcohol, solvent or
surface-active agents.
This symbol alerts you that important literature concerning operation and maintenance has been
included with this product.
!
•• Do not spray water or detergent directly on the product.
Symbols
Warning
A serious or fatal injury may result if instructions are not followed.
4
Wet a soft and dry cloth in water and wring thoroughly to clean the
exterior of the product.
Caution
Personal injury or damage to properties may result if instructions are not followed.
Activities marked by this symbol are prohibited.
Instructions marked by this symbol must be followed.
5
Connect the power cord to the product when cleaning is finished.
6
Power on the product and computer.
Storage
Connect the power plug to a grounded power socket (type 1 insulated
devices only).
Due to the characteristics of high-glossy products, using a UV humidifier nearby may create whitecolored stains on the product.
――Contact Customer Service Center if the inside of the product needs cleaning (service fee will be
•• An electric shock or injury may result.
!
Do not bend or pull the power cord with force. Be careful not to leave the
power cord under a heavy object.
charged).
Electricity and Safety
•• Damage to the cord may result in a fire or electric shock.
――The following images are for reference only. Real-life situations may differ from what is shown in the
images.
Do not place the power cord or product near heat sources.
•• A fire or electric shock may result.
Warning
Do not use a damaged power cord or plug, or a loose power socket.
•• An electric shock or fire may result.
Clean any dust around the pins of the power plug or the power socket with
a dry cloth.
•• A fire may result.
Do not use multiple products with a single power socket.
•• Overheated power sockets may cause a fire.
Do not touch the power plug with wet hands. Otherwise, an electric shock
may result.
Insert the power plug all the way in so it is not loose.
•• An unsecure connection may cause a fire.
!
!
Installation
Caution
Do not disconnect the power cord while the product is being used.
•• The product may become damaged by an electric shock.
Warning
DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF
THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.
•• A fire may result.
Only use the power cord provided with your product by Samsung. Do not
use the power cord with other products.
•• A fire or electric shock may result.
Have a technician install the wall-mount hanger.
!
•• Installation by an unqualified person can result in an injury.
•• Only use approved cabinets.
Keep the power socket where the power cord is connected unobstructed.
•• The power cord must be disconnected to cut off power to the product
when an issue occurs.
!
!
Do not install the product in poorly ventilated spaces such as a bookcase or
closet.
•• Note that the product is not completely powered down by using only
the power button on the remote.
•• An increased internal temperature may cause a fire.
Hold the plug when disconnecting the power cord from the power socket.
•• An electric shock or fire may result.
Install the product at least 10 cm away from the wall to allow ventilation.
•• An increased internal temperature may cause a fire.
!
!
Keep the plastic packaging out of the reach of children.
•• Children may suffocate.
!
Bend and keep part of the outdoor TV antenna cable hanging downwards
(the part inside the room) to prevent rainwater from entering the product.
•• If rainwater enters the product, a fire or electric shock can occur.
!
When using an outdoor antenna, be sure to install the antenna away from
nearby power lines to prevent the antenna from collapsing onto them in
strong winds.
•• A collapsed antenna can cause an electric shock or injury.
!
Do not install the product on an unstable or vibrating surface (insecure shelf,
sloped surface, etc.)
•• The product may fall and become damaged and/or cause an injury.
•• Using the product in an area with excess vibration may damage the
product or cause a fire.
Do not install the product in a vehicle or a place exposed to dust, moisture
(water drips, etc.), oil, or smoke.
•• A fire or electric shock may result.
!
Do not expose the product to direct sunlight, heat, or a hot object such as a
stove.
•• The product lifespan may be reduced or a fire may result.
Do not install the product within the reach of young children.
•• The product may fall and injure children.
•• As the front is heavy, install the product on a flat and stable surface.
Edible oil, such as soybean oil, can damage or deform the product. Do not
install the product in a kitchen or near a kitchen counter.
Operation
Caution
Do not drop the product while moving.
•• Product failure or personal injury may result.
Warning
There is a high voltage inside the product. Never disassemble, repair or
modify the product yourself.
!
•• A fire or electric shock may result.
Do not set down the product on its front.
•• Contact Samsung Customer Service Center for repairs.
•• The screen may become damaged.
Before moving the product, turn off the power switch and disconnect the
power cord, antenna cable and all other connected cables.
When installing the product on a cabinet or shelf, make sure that the
bottom edge of the front of the product is not protruding.
•• Damage to the cord may result in a fire or electric shock.
!
•• The product may fall and become damaged and/or cause an injury.
If the product generates abnormal sounds, a burning smell or smoke,
disconnect the power cord immediately and contact Samsung Customer
Service Center.
•• Install the product only on cabinets or shelves of the right size.
Set down the product gently.
•• Product failure or personal injury may result.
•• An electric shock or fire may result.
!
Do not let children hang from the product or climb on top of it.
!
•• Children may become injured or seriously harmed.
SAMSUNG
!
Installing the product in an unusual place (a place exposed to a lot of fine
dust, chemical substances, extreme temperatures or a significant presence
of moisture, or a place where the product will operate continuously for an
extended period of time) may seriously affect its performance.
•• Be sure to consult Samsung Customer Service Center if you want to
install the product at such a place.
If the product is dropped or the outer case is damaged, turn off the power
switch and disconnect the power cord. Then contact Samsung Customer
Service Center.
•• Continued use can result in a fire or electric shock.
Do not leave heavy objects or items that children like (toys, sweets, etc.) on
top of the product.
Do not use or keep combustible spray or an inflammable substance near
the product.
•• The product or heavy objects may fall as children try to reach for the
toys or sweets resulting in a serious injury.
•• An explosion or fire may result.
!
During a lightning or thunderstorm, remove the power cable and do not
touch the antenna cable.
Ensure the vents are not blocked by tablecloths or curtains.
•• An increased internal temperature may cause a fire.
•• A fire or electric shock may result.
!
Do not drop objects on the product or apply impact.
•• A fire or electric shock may result.
!
Do not move the product by pulling the power cord or any cable.
•• Product failure, an electric shock or fire may result from a damaged
cable.
If a gas leakage is found, do not touch the product or power plug. Also,
ventilate the area immediately.
•• Sparks can cause an explosion or fire.
!
GAS
Do not lift or move the product by pulling the power cord or any cable.
•• Product failure, an electric shock or fire may result from a damaged
cable.
100
Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects
that burn easily (paper, matches, etc) into the product (via the vent or input/
output ports, etc).
•• Be sure to power off the product and disconnect the power cord
when water or other foreign substances have entered the product.
Then contact Samsung Customer Service Center.
•• Product failure, an electric shock or fire may result.
Do not place objects containing liquid (vases, pots, bottles, etc) or metallic
objects on top of the product.
•• Be sure to power off the product and disconnect the power cord
when water or other foreign substances have entered the product.
Then contact Samsung Customer Service Center.
•• Product failure, an electric shock or fire may result.
Caution
Rest your eyes for more than 5 minutes for every 1 hour of product use.
•• Eye fatigue will be relieved.
Leaving the screen fixed on a stationary image for an extended period of
time may cause afterimage burn-in or defective pixels.
•• Activate power-saving mode or a moving-picture screen saver if you
will not be using the product for an extended period of time.
!
Do not touch the screen when the product has been turned on for an
extended period of time as it will become hot.
!
-_-
Disconnect the power cord from the power socket if you do not plan on
using the product for an extended period of time (vacation, etc).
•• Dust accumulation combined with heat can cause a fire, electric shock
or electric leakage.
Store small accessories out of the reach of children.
!
Use the product at the recommended resolution and frequency.
•• Your eyesight may deteriorate.
!
Exercise caution when adjusting the product angle or stand height.
!
•• Your hand or finger may get stuck and injured.
Do not hold the product upside-down or move it by holding the stand.
•• The product may fall and become damaged or cause an injury.
!
•• Tilting the product at an excessive angle may cause the product to fall
and an injury may result.
Do not place heavy objects on the product.
•• Product failure or personal injury may result.
Looking at the screen too close for an extended period of time can
deteriorate your eyesight.
When using headphones or earphones, do not turn the volume too high.
!
•• Having the sound too loud may damage your hearing.
Do not use humidifiers or stoves around the product.
•• A fire or electric shock may result.
Be careful that children do not place the battery in their mouths when
removed from the remote control. Place the battery in a location that
children or infants cannot reach.
Precautions when handling the panel
•• If children have had the battery in their mouths, consult your doctor
immediately.
Do not stand the product as shown in the image. The panel is fragile and
can get damaged.
When replacing the battery, insert it with the right polarity (+, -).
•• Otherwise, the battery may become damaged or it may cause fire,
personal injury or damage due to leakage of the internal liquid.
Lay the product down to handle it as shown in the image. (the packaging
can be used).
Use only the specified standardized batteries, and do not use a new battery
and a used battery at the same time.
•• Otherwise, the batteries may be damaged or cause fire, personal injury
or damage due to a leakage of the internal liquid.
!
!
Ensure you use the handles on the back when moving the product.
The batteries (and rechargeable batteries) are not ordinary refuse and must
be returned for recycling purposes. The customer is responsible for returning
the used or rechargeable batteries for recycling.
!
•• The customer can return used or rechargeable batteries to a nearby
public recycling center or to a store selling the same type of the
battery or rechargeable battery.
!
Do not hold or grasp any area of the product within 15 mm from the front.
15 mm
Preparations
Checking the Components
Components
――Components may differ in different locations.
-- Contact the vendor where you
purchased the product if any
components are missing.
-- The appearance of the components and
items sold separately may differ from the
image shown.
Warranty card
Quick setup guide
-- A stand is not provided with the product.
To install a stand, you can purchase one
separately.
(Not available in some locations)
Regulatory guide
Power cord
D-SUB cable
RS232C(IN) adapter
-
-
+
-- The RS232C adapter can be used to
connect to another monitor using the
D-SUB (9-pin) type RS232C cable.
-- Ensure you connect each of the adapters
to the correct RS232C IN or OUT port on
the product.
+
Batteries
(Not available in some locations)
Remote Control
Items sold separately
-- The following items can be purchased
at your nearest retailer.
Wall-mount Kit
Stand
RS232C-Stereo cable
DVI cable
HDMI-DVI cable
DP cable
HDMI cable
Video cable
Stereo cable
Component cable
RCA stereo cable
RCA cable
AV/Component adapter
AUDIO adapter
RS232C(OUT) adapter
LAN cable
Network Box
DP-DVI cable
(Used to connect a network
box)
External ambient sensor
――The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve
Parts
quality.
Panel Key
Control Panel
Buttons
Description
Power on the product.
If you press the
button when the product is turned on, the control menu will be
displayed.
――To exit the OSD menu, press and hold the panel key for at least one second.
Move to the upper or lower menu. You can also adjust the value of an option.
――Change the channel in TV mode.
Speaker
Move to the left or right menu.
――You can adjust the volume by moving the panel key left or right when the control
menu is not displayed.
Panel Key
Remote sensor
Press a button on the remote control pointing at the sensor on the front of the
product to perform the corresponding function.
――Using other display devices in the same space as the remote control of this
product can cause the other display devices to be inadvertently controlled.
Use the remote control within 7 m to 10 m from the sensor on the product at an angle of 30 from the left and right.
――Store used batteries out of reach of children and recycle.
――Do not use a new and used battery together. Replace both batteries at the same time.
――Remove batteries when the remote control is not to be used for an extended period of time.
Remote sensor
――If you press the
button on the panel key when the product is turned on, the
control menu will be displayed.
Buttons
Description
Select the connected input source.
Control menu
Source
Move the panel key right to select Source
in the control menu. When the list of
input sources is displayed, move the panel key left or right to select the desired input
source. Next, press the panel key.
Display the OSD menu.
Menu
Home
Move the panel key left to select Menu
in the control menu. The OSD control
screen will appear. Move the panel key right to select the desired menu. You can
select a sub-menu item by moving the panel key up, down, left, or right. To change
settings, select the desired menu and press the panel key.
Enter Go to Home mode.
Move the panel key up to select Home
in the control menu.
Power off the product.
Return
Power Off
Move the panel key down to select Power Off
the panel key.
Return
Exit the control menu.
in the control menu. Next, press
Reverse Side
Port
――The color and shape of parts may differ from what is shown. Specifications are
RS232C IN
subject to change without notice to improve quality.
Description
Connects to MDC using an RS232C adapter.
RS232C OUT
RS232C IN
RS232C
OUT
IR /
AMBIENT
SENSOR IN
RGB / DVI /
HDMI / AV /
COMPONENT
AUDIO IN
AUDIO
OUT
IR / AMBIENT SENSOR IN
Supplies power to the external sensor board or receives the light sensor signal.
RGB / DVI / HDMI / AV / COMPONENT
AUDIO IN
Receives sound from a PC via an audio cable.
AUDIO OUT
Connects to the audio of a source device.
SD CARD
Connect to an SD memory card.
USB
SD CARD
(5V 1A)
Connect to a USB memory device.
――The USB ports on the product accept a maximum constant current of 1A. If
the maximum value is exceeded, USB ports may not work.
USB
(5V 1A)
DVI / MAGICINFO IN
DVI: Connects to a source device using a DVI cable or HDMI-DVI cable.
MAGICINFO IN: To use MagicInfo, make sure to connect the DP-DVI cable.
DP IN
Connects to a PC using a DP cable.
HDMI IN 1, HDMI IN 2, HDMI IN 3
Connects to a source device using an HDMI cable.
RGB IN
Connects to a source device using a D-SUB cable.
DP OUT
Connects to another product using a DP cable.
ANT IN
Connect to an antenna cable.
AV IN / COMPONENT IN
Connects to a source device using the AV/Component adapter.
IR OUT
Receives the remote control signal via the external sensor board and outputs the
signal via LOOP OUT.
RJ45
Connects to MDC using a LAN cable.
USB
(5V 1A)
DVI /
MAGICINFO IN
DP IN
HDMI IN 1
HDMI IN 2
RGB IN
DP OUT
ANT IN
COMPONENT IN
IR
OUT
RJ45
HDMI IN 3
Anti-theft Lock
Spacer logo
――An anti-theft lock allows you to use the product securely even in public places.
Do not pull on the spacer logo using force. The logo may tear or break off.
――The locking device shape and locking method depend on the manufacturer. Refer to the user guide
provided with your anti-theft locking device for details.
――The following images are for reference only. Real-life situations may differ from what is shown in the
images.
To lock an anti-theft locking device:
1
Fix the cable of your anti-theft locking device to a heavy object such as a desk.
2
Put one end of the cable through the loop on the other end.
3
Insert the locking device into the anti-theft lock slot at the back of the product.
4
Lock the locking device.
-- An anti-theft locking device can be purchased separately.
-- Refer to the user guide provided with your anti-theft locking device for details.
-- Anti-theft locking devices can be purchased at electronics retailers or online.
Remote Control
――Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled.
――A button without a description in the image below is not supported on the product.
POWER
OFF
Power on the product.
.QZ
ABC
DEF
GHI
JKL
MNO
PRS
TUV
WXY
DEL-/--
SYMBOL
1
4
Press to select additional
channels (digital) being broadcasted by the
same station. For example, to select channel
“54-3”, press “54”, then press “-” and “3”.
7
5
8
0
3
6
VOL
SOURCE
Number buttons
Enter the password in the OSD menu.
9
CH LIST
Channel List Launch Button.
Mute the sound.
Unmuting the sound: Press MUTE again or press
the volume control(+ VOL -) button.
MUTE
Adjust the volume.
Change the input source.
2
Power off the product.
CH
Change the channel in TV mode.
Display or hide the onscreen display menu, or
return to the previous menu.
MENU
HOME
MagicInfo
Player I
Use this hotkey to directly access MagicInfo. The
hotkey works if the network box is connected.
Go to Home Launch Button.
-- Remote control button functions may
differ for different products.
Quickly select frequently used functions.
TOOLS
INFO
Display information about the current input
source.
Move to the upper, lower, left or right menu, or
adjust an option's setting.
Confirm a menu selection.
Return to the previous menu.
RETURN
EXIT
PC
DVI
HDMI
DP
B
C
D
UNSET
LOCK
A
It sets safe lock function.
If multiple products are connected through the
Video Wall feature, press the SET button and
enter a product ID using the number buttons.
Control the product using the remote control.
Cancel a value that has been set using the SET
button and control all connected products
using the remote control.
To place batteries in the remote control
IR control
SET
Exit the current menu.
In TV mode, configure settings such as the
program guide for digital channels. In other
modes, manually select a connected source
device. In media and HDMI-CEC modes,
configure settings for the functions assigned to
the color buttons on the remote control. Enable
or disable lock mode.
Used in Anynet+ mode and multimedia mode.
-- Remote control button functions may
differ for different products.
Connection Using an IR Stereo Cable
(sold separately)
1
2
Make sure to connect the External ambient sensor while the product is powered
off. Then, power on the product.
Controlling more than one display product using
your remote control
IR OUT
IR / AMBIENT
SENSOR IN
•• Connect the IR OUT port on the product to the IR / AMBIENT SENSOR IN
port on the other display product using the dedicated stereo cable.
•• A command sent from the remote control pointed at product
received by both display products 1 and 2 .
――The appearance may differ depending on the product.
1
will be
Controlling more than one display product using an
External ambient sensor (sold separately)
1
•• A command sent from the remote control pointed at product 1 (to which
the External ambient sensor is connected) will be received by both display
products 1 and 2 .
――The appearance may differ depending on the product.
IR / AMBIENT
SENSOR IN
POWER
SOURCE
IR OUT
2
IR / AMBIENT
SENSOR IN
Before Installing the Product
(Installation Guide)
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
•• Ensure that an authorized installation company installs the wall mount.
•• Otherwise, it may fall and cause personal injury.
•• Make sure to install the specified wall mount.
Switching between portrait and landscape
――Contact Samsung Customer Service Center for further details.
•• To use the product in portrait orientation, rotate the product clockwise until the spacer logo faces down.
Ventilation
Installation on a Perpendicular Wall
A Minimum 40 mm
B Ambient temperature: Under 35 C
A
B
Figure 1.1 Side view
•• When installing the product on a perpendicular wall, allow at least 40 mm of space between the product and wall surface
for ventilation and ensure that the ambient A temperature is kept below 35 C.
Figure 1.3 Side view
Installation on an Indented Wall
――Contact Samsung Customer Service Center for further details.
B
D
D
Plane view
A Minimum 40 mm
B Minimum 70 mm
A
C Minimum 50 mm
D Minimum 50 mm
E Ambient temperature: Under 35 C
――When installing the product on an indented wall, allow at least the space specified above between the product and wall for
ventilation and ensure that the ambient temperature is kept below 35 C.
C
E
Figure 1.2 Side view
Dimensions
Unit: mm (inches)
Model name
5
DM82D
1
1854.22 (73.00)
1 2
1813.76 (71.41)
23
1023.74 (40.30)
34
45
1064.20 (41.90)
1
2
4
3
89.25 (3.51)
(48.5 (1.91)
Without Handle)
――All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice.
Refer to the dimensions prior to performing installation of your product. Not responsible for typographical or printed errors.
Installing the Wall Mount
Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the product on the wall.
For detailed information on installing the wall mount, see the instructions provided with the wall mount.
We recommend you contact a technician for assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the
wall mount on your own.
Wall Mount Kit Specifications (VESA)
――Install your wall mount on a solid wall perpendicular to the floor. Before
attaching the wall mount to surfaces other than plaster board, please contact
your nearest dealer for additional information.
If you install the product on a slanted wall, it may fall and result in severe
personal injury.
•• Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided.
•• Do not use screws that are longer than the standard length or do not comply with the VESA standard screw
specifications. Screws that are too long may cause damage to the inside of the product.
•• For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ
depending on the wall mount specifications.
•• Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
•• Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the
consumer fails to follow the product installation instructions.
•• Always have two people mount the product on a wall.
•• Standard dimensions for wall mount kits are shown in the table below.
Unit: mm (inches)
Model name
DM82D
VESA screw hole
specs (A * B) in
millimeters
600 x 400 (23.62 x 15.7)
Standard Screw
M8
Quantity
4
――Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to electric shock.
Remote Control (RS232C)
•• Pin assignment
1 2 3 4 5
Cable Connection
RS232C Cable
Interface
RS232C (9 pins)
Pin
TxD (No.2), RxD (No.3), GND (No.5)
Bit rate
9600 bps
Data bits
8 bit
Parity
None
Stop bit
1 bit
Flow control
None
Maximum length
15 m (only shielded type)
6 7 8 9
Pin
Signal
1
Detect data carrier
2
Received data
3
Transmitted data
4
Prepare data terminal
5
Signal ground
6
Prepare data set
7
Send request
8
Clear to send
9
Ring indicator
LAN Cable
•• RS232C cable
Connector: 9-Pin D-Sub to Stereo Cable
9
•• Pin assignment
3
2
1
5
1 2 3 4 5 6 7 8
-P2-
6
-P1-
1
-P1Female
-P1-
-P2-
-P2-
Rx
2
-------->
3
Tx
STEREO
Tx
3
<--------
2
Rx
PLUG
Gnd
5
----------
5
Gnd
(3.5ø)
Pin No
Standard Color
Signal
1
White and orange
TX+
2
Orange
TX-
3
White and green
RX+
4
Blue
NC
5
White and blue
NC
6
Green
RX-
7
White and brown
NC
8
Brown
NC
Cross LAN cable (PC to PC)
•• Connector : RJ45
Direct LAN cable (PC to HUB)
HUB
P1
P2
Signal
P1
P2
Signal
TX+
1
<-------->
3
RX+
RJ45
P2
RJ45
P1
P1
P2
RJ45 MDC
P2
Signal
TX-
2
<-------->
6
RX-
<-------->
1
TX+
RX+
3
<-------->
1
TX+
2
<-------->
2
TX-
RX-
6
<-------->
2
TX-
RX+
3
<-------->
3
RX+
RX-
6
<-------->
6
RX-
Signal
P1
TX+
1
TX-
Connection
•• Connection 2
•• Connection 1
RJ45
IN
RS232C
OUT
IN
RS232C
OUT
IN
RS232C
OUT
IN
RS232C
RJ45
OUT
•• Connection 3
RJ45
RS232C
OUT
IN
RS232C
OUT
IN
RS232C
OUT
IN
RS232C
OUT
No.
Control Codes
Viewing control state (Get control command)
Header
Command
0xAA
Command type
ID
Data length
Command
0xAA
Command type
Command type
10
Video Wall On
0x84
0~1
11
Video Wall User Control
0x89
-
E.g. Power On & ID=0
Data length
Data
1
Value
Checksum
Command
No.
Value range
•• All communications take place in hexadecimals. The checksum is calculated by adding up all
values except the header. If a checksum adds up to be more than 2 digits as shown below
(11+FF+01+01=112), the first digit is removed.
0
ID
Command
Checksum
Controlling (Set control command)
Header
Command type
Command
Value range
1
Power control
0x11
0~1
2
Volume control
0x12
0~100
3
Input source control
0x14
-
4
Screen mode control
0x18
-
5
Screen size control
0x19
0~255
6
PIP on/off control
0x3C
0~1
7
Auto adjustment control (PC and
BNC only)
0x3D
0
8
Video wall mode control
0x5C
0~1
9
Safety Lock
0x5D
0~1
Header
Command
0xAA
0x11
Header
Command
0xAA
0x11
ID
ID
Data length
Data 1
1
"Power"
Data length
Data 1
1
1
Checksum
12
•• To control all devices connected by a serial cable simultaneously irrespective of IDs, set the ID as
"0xFE" and transmit commands. Commands will be executed by each device but ACK will not
respond.
Power control
Volume control
•• Function
A product can be powered on and off using a PC.
•• Function
The volume of a product can be adjusted using a PC.
•• Viewing power state (Get Power ON / OFF Status)
•• Viewing volume state (Get Volume Status)
Header
Command
0xAA
0x11
ID
Data length
Checksum
0
•• Setting power ON/Off (Set Power ON / OFF)
Header
Command
0xAA
0x11
ID
Header
Command
0xAA
0x12
Data length
Data
1
"Power"
Checksum
Header
Command
0xAA
0x12
•• Ack
0: Power OFF
Header
Command
0xAA
0xFF
•• Ack
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'A'
0x11
"Power"
Checksum
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'N'
0x11
"ERR"
"ERR" : A code showing what error has occurred.
ID
Data length
Data
1
"Volume"
Checksum
ID
Data length
Ack/Nak
r-CMD
Val1
3
'A'
0x12
"Volume"
Checksum
•• Nak
•• Nak
Command
0
"Volume": Volume value code to be set on a product. (0-100)
"Power": Power code to be set on a product.
Header
Checksum
"Volume": Volume value code to be set on a product. (0-100)
1: Power ON
Command
Data length
•• Setting the volume (Set Volume)
"Power": Power code to be set on a product.
Header
ID
Checksum
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'N'
0x12
"ERR"
"ERR" : A code showing what error has occurred.
Checksum
Input source control
0x24
HDMI2_PC
•• Function
The input source of a product can be changed using a PC.
0x25
DisplayPort
――DVI_video, HDMI1_PC and HDMI2_PC cannot be used with the Set command. They only respond to
•• Viewing input source state (Get Input Source Status)
Header
Command
0xAA
0x14
ID
Data length
"Get" commands.
――This model does not support HDMI1, HDMI1_PC, HDMI2 and HDMI2_PC ports.
Checksum
――MagicInfo is only available with models that contain the MagicInfo function.
0
――RF(TV), DTV are only available with models that include a TV.
•• Setting the input source (Set Input Source)
Header
Command
0xAA
0x14
ID
•• Ack
Data length
Data
1
"Input Source"
Checksum
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'A'
0x14
"Input
Source"
"Input Source": An input source code to be set on a product.
0x14
PC
0x18
DVI
0x0C
Input source
0x08
Component
0x20
MagicInfo
0x1F
DVI_video
0x30
RF(TV)
0x40
DTV
0x21
HDMI1
0x22
HDMI1_PC
0x23
HDMI2
Checksum
"Input Source": An input source code to be set on a product.
•• Nak
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'N'
0x14
"ERR"
"ERR" : A code showing what error has occurred.
Checksum
Screen mode control
•• Nak
•• Function
The screen mode of a product can be changed using a PC.
Screen mode cannot be controlled when the Video Wall function is enabled.
――This control can only be used on models that include a TV.
Command
0xAA
0x18
ID
Data length
0xAA
ID
0x18
16 : 9
0x04
Zoom
0x31
Wide Zoom
0x0B
4:3
Ack/Nak
r-CMD
Val1
3
'N'
0x18
"ERR"
Checksum
•• Viewing the screen size (Get Screen Size Status)
Data
length
Data
Checksum
1
"Screen Mode"
Header
Command
0xAA
0x19
ID
Data length
Checksum
0
•• Ack
"Screen Mode": A code that sets the product status
0x01
0xFF
Data length
•• Function
The screen size of a product can be changed using a PC.
0
Command
0xAA
ID
Screen size control
Checksum
•• Setting the picture size (Set Picture Size)
Header
Command
"ERR": A code showing what error has occurred
•• Viewing screen status (Get Screen Mode Status)
Header
Header
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x19
"Screen Size"
Checksum
"Screen Size": product screen size (range: 0 – 255, unit: inch)
•• Nak
Header
Command
0xAA
0xFF
•• Ack
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'A'
0x18
"Screen
Mode"
"Screen Mode": A code that sets the product status
Checksum
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'N'
0x19
"ERR"
"ERR": A code showing what error has occurred
Checksum
PIP On/Off control
Auto adjustment control (PC and BNC only)
•• Function
The PIP mode of a product can be turned on or off using a PC.
•• Function
Automatically adjust the PC system screen using a PC.
――Only available on models that have the PIP function.
――The mode cannot be controlled if Video Wall is set to On.
•• Viewing auto adjustment state (Get Auto Adjustment Status)
None
――This function is not available in MagicInfo.
•• Setting auto adjustment (Set Auto Adjustment)
•• Viewing PIP on/off state (Get the PIP ON / OFF Status)
Header
Command
0xAA
0x3C
ID
Data length
Checksum
Command
0xAA
0x3C
Command
0xAA
0x3D
ID
Data length
Data
1
"Auto
Adjustment"
0
ID
Checksum
"Auto Adjustment" : 0x00 (at all times)
•• Setting PIP on/off (Set the PIP ON / OFF)
Header
Header
Data length
Data
1
"PIP"
•• Ack
Checksum
"PIP": A code used to turn the PIP mode of a product on or off
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x3D
"Auto
Adjustment"
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x3D
"ERR"
1: PIP ON
0: PIP OFF
Checksum
•• Nak
•• Ack
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x3C
"PIP"
Checksum
•• Nak
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x3C
"PIP"
"ERR": A code showing what error has occurred
Command
0xAA
0xFF
ID
"ERR": A code showing what error has occurred
"PIP": A code used to turn the PIP mode of a product on or off
Header
Header
Checksum
Checksum
Video Wall Mode Control
Safety Lock
•• Function
Video Wall mode can be activated on a product using a PC.
•• Function
PC can be used to turn the Safety Lock function on or off on a product.
This control is only available on a product whose Video Wall is enabled.
This control is available regardless of whether or not the power is turned on.
•• Viewing video wall mode (Get Video Wall Mode)
Header
Command
0xAA
0x5C
ID
Data length
•• Viewing the safety lock state (Get Safety Lock Status)
Checksum
0
•• Setting the video wall (Set Video Wall Mode)
Header
Command
0xAA
0x5C
ID
Header
Command
0xAA
0x5D
ID
Data length
Checksum
0
•• Enabling or disabling safety lock (Set Safety Lock Enable / Disable)
Data length
Data
Checksum
1
"Video Wall Mode"
Header
Command
0xAA
0x5D
ID
Data length
Data
1
"Safety Lock"
"Video Wall Mode": A code used to activate Video Wall mode on a product
"Safety Lock": Safety lock code to be set on a product
1: Full
1: ON
0: Natural
0: OFF
Checksum
•• Ack
•• Ack
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x5C
"Video Wall
Mode"
Checksum
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x5D
"Safety Lock"
Checksum
"Safety Lock": Safety lock code to be set on a product
"Video Wall Mode": A code used to activate Video Wall mode on a product
•• Nak
•• Nak
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x5C
"ERR"
Header
Command
0xAA
0xFF
Checksum
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'N'
0x5D
"ERR"
"ERR": A code showing what error has occurred
"ERR": A code showing what error has occurred
Checksum
Video Wall On
•• Nak
•• Function
Turn Video Wall on or off on the product from your computer.
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'N'
0x84
ERR
Checksum
•• Get Video Wall On/Off Status
Header
Command
0xAA
0x84
ID
Data length
"ERR": A code showing what error has occurred
Checksum
Video Wall User Control
0
•• Function
Turn the Video Wall function on or off on the product from your computer.
•• Set Video Wall On/Off
Header
Command
0xAA
0x84
ID
Data length
Data
Checksum
1
V.Wall_On
•• Get Video Wall Status
•• V.Wall_On: Video Wall code to be assigned to the product
1: Video Wall ON
•• Ack
Command
0xAA
0xFF
V.Wall_On : Same as above
Command
0xAA
0x89
ID
Data length
Checksum
0
•• Set Video Wall
0: Video Wall OFF
Header
Header
ID
Data length
Ack/Nak
r-CMD
Val1
3
'A'
0x84
V.Wall_
On
Checksum
Header
Command
0xAA
0x89
ID
Data length
Val1
Val2
2
Wall_Div
Wall_SNo
Wall_Div: Video Wall Divider code assigned to the product
Checksum
10x10 Video Wall Model
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Off
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
1
0x11
0x12
0x13
0x14
0x15
0x16
0x17
0x18
0x19
0x1A
0x1B
0x1C
0x1D
0x1E
0x1F
2
0x21
0x22
0x23
0x24
0x25
0x26
0x27
0x28
0x29
0x2A
0x2B
0x2C
0x2D
0x2E
0x2F
3
0x31
0x32
0x33
0x34
0x35
0x36
0x37
0x38
0x39
0x3A
0x3B
0x3C
0x3D
0x3E
0x3F
4
0x41
0x42
0x43
0x44
0x45
0x46
0x47
0x48
0x49
0x4A
0x4B
0x4C
0x4D
0x4E
0x4F
5
0x51
0x52
0x53
0x54
0x55
0x56
0x57
0x58
0x59
0x5A
0x5B
0x5C
0x5D
0x5E
0x5F
6
0x61
0x62
0x63
0x64
0x65
0x66
0x67
0x68
0x69
0x6A
0x6B
0x6C
0x6D
0x6E
0x6F
7
0x71
0x72
0x73
0x74
0x75
0x76
0x77
0x78
0x79
0x7A
0x7B
0x7C
0x7D
0x7E
N/A
8
0x81
0x82
0x83
0x84
0x85
0x86
0x87
0x88
0x89
0x8A
0x8B
0x8C
N/A
N/A
N/A
9
0x91
0x92
0x93
0x94
0x95
0x96
0x97
0x98
0x99
0x9A
0x9B
N/A
N/A
N/A
N/A
10
0xA1
0xA2
0xA3
0xA4
0xA5
0xA6
0xA7
0xA8
0xA9
0xAA
N/A
N/A
N/A
N/A
N/A
11
0xB1
0xB2
0xB3
0xB4
0xB5
0xB6
0xB7
0xB8
0xB9
N/A
N/A
N/A
N/A
N/A
N/A
12
0xC1
0xC2
0xC3
0xC4
0xC5
0xC6
0xC7
0xC8
N/A
N/A
N/A
N/A
N/A
N/A
N/A
13
0xD1
0xD2
0xD3
0xD4
0xD5
0xD6
0xD7
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
14
0xE1
0xE2
0xE3
0xE4
0xE5
0xE6
0xE7
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
15
0xF1
0xF2
0xF3
0xF4
0xF5
0xF6
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Wall_SNo: Product Number code assigned to the product
10x10 Video Wall Model : ( 1 ~ 100)
Set Number
Data
1
0x01
2
0x02
...
...
99
0x63
100
0x64
•• Ack
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
Val2
4
'A'
0x89
Wall_Div
Wall_SNo
Data length
Ack/Nak
r-CMD
Val1
3
'N'
0x89
ERR
•• Nak
Header
Command
0xAA
0xFF
ID
"ERR": A code showing what error has occurred
Checksum
Checksum
Connecting and Using a Source Device
Before Connecting
Pre-connection Checkpoints
――Before connecting a source device, read the user manual provided with it.
The number and locations of ports on source devices may differ from device to device.
――Do not connect the power cable until all connections are completed.
Connecting the power cable during connection may damage the product.
――Connect the sound ports correctly: left = white and right = red.
Connecting to a PC
•• Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
•• A PC can be connected to the product in a variety of ways.
Select a connection method suitable for your PC.
――Connecting parts may differ in different products.
Connection using the D-SUB cable (Analogue type)
――Check the types of ports at the back of the product you want to connect.
RGB IN
RGB / DVI / HDMI / AV / COMPONENT
AUDIO IN
Connection using a DVI cable (Digital type)
Connection Using an HDMI-DVI Cable
――When you connect a PC to the product using an HDMI-DVI cable, set Edit Name to DVI PC to access
video and audio content stored on the PC.
DVI /
MAGICINFO IN
HDMI IN 1, HDMI IN 2, HDMI IN 3
RGB / DVI / HDMI / AV / COMPONENT
AUDIO IN
RGB / DVI / HDMI / AV / COMPONENT
AUDIO IN
――You can use the DVI port on the product as an HDMI port by using a DVI-HDMI adapter.
HDMI
DVI /
MAGICINFO IN
Connection Using an HDMI Cable
Connection Using an DP Cable
HDMI IN 1, HDMI IN 2, HDMI IN 3
DP IN
――You can use the DVI port on the product as an HDMI port by using a DVI-HDMI adapter.
•• Precautions for using DP
――To increase the standby power capacity, the product stops DP communication when it is turned
off or in power-saving mode.
If the product in dual monitor mode is turned off or goes into power-saving mode, monitor
setting changes may not be updated. As a result, screen output may not be displayed properly.
In the occurrence of this issue, set Max. Power Saving to Off before using the product.
――Some graphics cards that are not compliant with the DP standard may prevent the Windows
Booting/Bios screen from being displayed when the product is in power-saving mode. If this is
the case, make sure to turn on the product first before turning on your PC.
――The DisplayPort interface (DP IN) on the product and the provided DP cable are designed based
HDMI
DVI /
MAGICINFO IN
on the VESA standards. Using a DP cable that is not VESA compliant may cause the product to
function improperly. Samsung Electronics shall not be held responsible for any issues from using
a cable that is not VESA compliant.
Make sure to use a DP cable that is VESA compliant.
Connecting to a Video Device
•• Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
•• You can connect a video device to the product using a cable.
――Connecting parts may differ in different products.
――Press the SOURCE button on the remote control to change the source.
Connection Using the AV Cable
AV IN / COMPONENT IN
RGB / DVI / HDMI / AV / COMPONENT
AUDIO IN
Connection Using the component Cable
AV IN / COMPONENT IN
RGB / DVI / HDMI / AV / COMPONENT
AUDIO IN
Connection Using an HDMI-DVI Cable
――Audio will not be enabled if the product is connected to a video device using an HDMI-DVI cable. To resolve this, additionally connect an audio cable to the audio ports on the product and video device.
――After connecting a video device to the product with an HDMI-DVI cable, make sure to configure the settings as shown below to enable the video and audio from the video device.
You can use the DVI port on the product as an HDMI port by using a DVI-HDMI adapter.
――Sound → set HDMI Sound to AV(HDMI)
――System → General → set HDMI Hot Plug to On
――Supported resolutions include 1080p (50/60Hz), 720p (50/60Hz), 480p, and 576p.
DVI /
MAGICINFO IN
HDMI
HDMI IN 1, HDMI IN 2, HDMI IN 3
RGB / DVI / HDMI / AV / COMPONENT
AUDIO IN
Connection Using an HDMI Cable
Using an HDMI cable or HDMI to DVI Cable (up to 1080p)
•• You can use the DVI port on the product as an HDMI port by using a DVI-HDMI adapter.
-- Sound → set HDMI Sound to AV(HDMI)
-- System → General → set HDMI Hot Plug to On
•• For better picture and audio quality, connect to a digital device using an HDMI cable.
•• An HDMI cable supports digital video and audio signals, and does not require an audio cable.
-- To connect the product to a digital device that does not support HDMI output, use an HDMI-DVI and audio cables.
•• The picture may not display normally (if at all) or the audio may not work if an external device that uses an older version of HDMI mode is connected to the product.
If such a problem occurs, ask the manufacturer of the external device about the HDMI version and, if out of date, request an upgrade.
•• Be sure to use an HDMI cable with a thickness of 14 mm or less.
•• Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may occur.
•• A basic high-speed HDMI cable or one with ethernet is recommended.
This product does not support the ethernet function via HDMI.
DVI /
MAGICINFO IN
HDMI
HDMI IN 1, HDMI IN 2, HDMI IN 3
Connecting to an Audio System
Connecting the antenna
――Connecting parts may differ in different products.
――Connecting parts may differ in different products.
――When the product is powered on for the first time, basic settings are configured automatically. Take
extra care to ensure the wires inside the antenna cable are not bent.
AUDIO OUT
ANT IN
Connecting the LAN Cable
――Connecting parts may differ in different products.
RJ45
•• Use Cat7(*STP Type) cable for the connection.
*Shielded Twist Pair
Connecting the network box (Sold separately)
――For details on how to connect to a network box, refer to the user's manual provided with the network box upon purchase.
MagicInfo
To use MagicInfo, a network box (sold separately) must be connected to the product.
――To change the MagicInfo settings, run "MagicinfoSetupWizard" on the desktop.
――For details on how to use MagicInfo, refer to the DVD provided with the network box.
――The information in this section is subject to change without notice for quality improvement.
――If a problem occurs after installing an operating system other than the one provided with the network box, restoring the previous version of the operating system, or
installing software that is not compatible with the operating system provided, you will not be able to benefit from technical support and will be charged a fee for a visit
from a service technician. A product exchange or refund will also not be available.
Entering MagicInfo mode
MagicInfo Setup Wizard - v.1.12
Select Application - step 1
1
After installing and connecting the network box (sold separately) to the product, power on the product.
2
Press SOURCE on the remote control, and select MagicInfo.
MagicInfo Pro (LAN, WAN based version)
――Connecting the network box to the DVI / MAGICINFO IN port on the product will change Source from DVI to MagicInfo.
MagicInfo-i Premium (Web-based version)
Select Later
< Back(B)
Next(N) >
Finish
Cancel
3
Select the default application you want to run when MagicInfo starts.
4
MagicInfo Setup Wizard - v.1.12
Enter the IP information.
MagicInfo Setup Wizard - v.1.12
6
Select a display mode.
7
Double-check the settings you have
Select Screen Type - step 4
Select TCP/IP - step 2
Obtain an IP address automatically
Use the following IP address:
Landscape
IP address:
192 . 168 . 0 . 102
Subnet mask:
255 . 255 . 255 . 0
Default gateway:
192 . 168 . 0 . 1
Portrait
Obtain DNS server address automatically
Use the following DNS server address:
Preferred DNS server:
10 . 44 . 33 . 22
Alternate DNS server:
10 . 33 . 22 . 11
< Back(B)
Next(N) >
Finish
< Back(B)
Cancel
5
MagicInfo Setup Wizard - v.1.12
Select a language.
Next(N) >
Finish
Cancel
MagicInfo Setup Wizard - v.1.12
(The default language is English.)
just configured.
Setup Information
Select Language -step 3
Select the language you want to install on the system for menus and
dialogs.
1. Application :
Current Language
2. Internet Protocol [TCP/IP]
:
Engilsh
IP :
Chinese [Traditional]
German
4. Screen Type :
French
double-click the MagicInfo icon on
the desktop. The icon will appear at the
bottom right of the screen.
192.168.0.102
3. Language :
English
――If the execution icon does not appear,
MagicInfo Pro [LAN,WAN based version\
English
Landscape
Italian
Japanese
Korean
Russian
Swedish
Turkish
Chinese [Simplified]
Portuguese
< Back(B)
Do not show again
Next(N) >
Finish
Cancel
< Back(B)
Apply
Finish
Cancel
Changing the Input source
Source allows you to select a variety of sources and change source device names.
Source
――The screen may not display correctly if an incorrect source is selected for the source device you want to convert to.
You can display the screen of a source device connected to the product. Select a source from source list to display the screen
of the selected source.
――The input source can also be changed by using the SOURCE button on the remote control.
――To view detailed information about connected source devices, press the TOOLS button from the Source page.
SOURCE → Source
Edit Name
Source
SOURCE → Source → TOOLS → Edit Name → ENTER E
TV
HDMI1
HDMI2
HDMI3
AV
Component
To go to Options, press and hold the Enter button.
Sometimes the screen will not display properly unless the name of a source device is specified in Edit Name.
In addition, it is best to rename the source device in Edit Name to obtain optimal picture quality.
――The list can include the following source devices. Source devices on the list differ depending on the selected source.
PC / Cable STB / Satellite STB / PVR STB / Game / Blu-ray / DVD / VCR / AV Receiver / Camcorder / DVI PC /
DVI Devices / TV / IPTV / HD DVD / DMA
――Available settings in the Picture menu depend on the current source and settings made in Edit Name.
•• When connecting a PC to the HDMI terminal, set Edit Name to PC. In other cases, set Edit Name to AV devices.
-- The displayed image may differ depending on the model.
•• When connecting a PC to the HDMI IN 1, HDMI IN 2, HDMI IN 3 port with HDMI cable, you should set the product to PC
mode under Edit Name.
•• When connecting a PC to the HDMI IN 1, HDMI IN 2, HDMI IN 3 port with HDMI to DVI cable, you should set the
product to DVI PC mode under Edit Name.
•• When connecting an AV devices to the HDMI IN 1, HDMI IN 2, HDMI IN 3 port with HDMI to DVI cable, you should set
the product to DVI Devices mode under Edit Name.
Information
SOURCE → Source → TOOLS → Information → ENTER E
You can see detailed information about the selected external device.
Using MDC
Multiple display control "MDC" is an application that allows you to easily control multiple display devices simultaneously using a PC.
- For details on how to use the MDC program, refer to Help after installing the program. The MDC program is available on the website.
MDC Program Installation/Uninstallation
Installation
――MDC installation can be affected by the graphics card, mother board and network conditions.
1
Click the MDC Unified installation program.
2
Select a language for installation. Next, click "OK".
3
When the "Welcome to the InstallShield Wizard for MDC_Unified" screen appears, click "Next".
4
In the "License Agreement" window displayed, select "I accept the terms in the license
5
In the displayed "Ready to Install the Program" window, check the directory path to install the
program in and click "Install".
8
Installation progress will be displayed.
9
Click "Finish" in the displayed "InstallShield Wizard Complete" window.
――Select "Launch MDC Unified" and click "Finish" to run the MDC program immediately.
10The MDC Unified shortcut icon will be created on the desktop after installation.
――The MDC execution icon may not be displayed depending on the PC system or product
specifications.
――Press F5 if the execution icon is not displayed.
agreement" and click "Next".
Uninstallation
In the displayed "Customer Information" window, fill out all the information fields and click
1
Select Settings > Control Panel on the Start menu and double-click Add/Delete Program.
2
Select MDC Unified from the list and click Change/Remove.
"Next".
6
7
In the displayed "Destination Folder" window, select the directory path you want to install the
program in and click "Next".
――If the directory path is not specified, the program will be installed in the default directory path.
Connecting to MDC
Using MDC via RS-232C (serial data communications standards)
An RS-232C serial cable must be connected to the serial ports on the PC and monitor.
Monitor 1
RS232C IN RS232C OUT
Monitor 2
Computer
Using MDC via Ethernet
Enter the IP for the primary display device and connect the device to the PC. Display devices can be connected to each other using a LAN cable.
Connection using a direct LAN cable
――Multiple products can be connected using the RJ45 port on the product and the LAN ports on the HUB.
Computer
RJ45
HUB
Monitor 1
Monitor 2
Connection using a cross LAN cable
――Multiple products can be connected using the RS232C IN / OUT port on the product.
Monitor 1
RJ45
RS232C OUT
Monitor 2
Computer
Home feature
This feature is provided in Support → Go to Home.
Accessible using the HOME button on the remote control.
――To use the Player feature, set Play via to MagicInfo in System.
Player
HOME
Play a range of content such as channels with schedules assigned, templates or files.
Play channels or content using any of the following methods.
→ Player →ENTER E
•• Network Channel: Play content using the server.
――To run Network Channel, make sure the product is connected to the server.
•• Local Channel: Play content in internal memory or from external memory.
Player
Schedule
Template
Play a variety of content, such as
scheduled channels, templates or files.
Clone Product
ID Settings
Video Wall
Network Status
Picture Mode
On/Off Timer
Ticker
More settings
-- The displayed image may differ depending on the model.
Approving a connected device from the server
3
Select Device from the top menu bar.
4
Select Lite from the menus on the left.
5
Select Unapproved from the sub-menus of Lite.
6
Select the Approve button for your device from the list of unapproved Lite devices.
Approving the Lite server
•• Set MagicInfo Mode to Lite in Server Network Settings.
Approve and use the Lite server now.
――First configure the server Network Settings before device approval.
1
2
Access the server you have assigned to your device.
Enter your ID and password to log in.
7
Enter the information required to approve the device.
9
When the device is approved by the server, the schedule registered in the selected group will be
downloaded to the device. The schedule will run after it is downloaded.
――For further details on how to configure a schedule, refer to the <MagicInfo Lite Server user's manual>.
――If a device is deleted from the list of devices approved by the server, the device will reboot to reset its
settings.
Setting the current time
A schedule may not run if the time set on the device is different from the server's current time.
1
Go to the tabs Device → Time.
2
Select your device.
3
Select Clock Set, and sync the time with the server.
•• Device Name: Enter the device name.
•• Device Group: Select
to specify the group.
•• Location: Enter the current location of the device.
――Pressing the INFO button on the remote when a network schedule is running will display the details of
the schedule. Check that the correct device has been selected by viewing the device ID in the details.
8
Select the All menu to check that the device has been registered.
•• When connecting to the server for the first time, the time on the product is set using the GMT time
of the region where the server is installed.
•• The time on the product can be changed from the server as shown in step 3.
•• Turning the product off and then on again will restore the time setting on the product to the last
time that was set from the server.
――For further details on how to manage the time (scheduling, holiday management, etc.), refer to the
<MagicInfo Lite Server user's manual>.
Approving the Premium server
3
Select Device from the top menu bar.
4
Select Premium from the menus on the left.
5
Select Unapproved from the sub-menus of Premium.
6
Select the Approve button for your device from the list of unapproved Premium devices.
•• Set MagicInfo Mode to Premium in Server Network Settings.
Approve and use the Premium server now.
――First configure the server Network Settings before device approval.
1
2
Access the server you have assigned to your device.
Enter your ID and password to log in.
7
Enter the information required to approve the device.
9
When the device is approved by the server, the schedule registered in the selected group will be
downloaded to the device. The schedule will run after it is downloaded.
――For further details on how to configure a schedule, refer to the <MagicInfo Premium Server user's
manual>.
――If a device is deleted from the list of devices approved by the server, the device will reboot to reset its
settings.
Setting the current time
A schedule may not run if the time set on the device is different from the server's current time.
•• Device Name: Enter the device name.
•• Device Group: Select
1
Go to the tabs Device → Time.
2
Select your device.
3
Select Clock Set, and sync the time with the server.
to specify the group.
•• Location: Enter the current location of the device.
――Pressing the INFO button on the remote when a network schedule is running will display the details of
the schedule. Check that the correct device has been selected by viewing the device ID in the details.
8
Select the All menu to check that the device has been registered.
•• When connecting to the server for the first time, the time on the product is set using the GMT time
of the region where the server is installed.
•• The time on the product can be changed from the server as shown in step 3.
•• Turning the product off and then on again will restore the time setting on the product to the last
time that was set from the server.
――For further details on how to manage the time (scheduling, holiday management, etc.), refer to the
<MagicInfo Premium Server user's manual>.
Device : All
Player
Content : All
Sort By : File name
Browse and play content stored in the selected device.
No channel.
Network Channel
My Templates
Options
1 / 4 item(s)
Network Channel
Play content, templates and schedules configured on the server.
•• You can view whether the server is connected (approval) in the Player menu screen.
To view whether the server is connected when a Network Channel is running, press INFO on the remote.
1
Select Network Channel from the Player menu.
2
Network Channel will run.
No channel.
Local Channel
Deployed Folders
Local Channel
-- The displayed image may differ depending on the model.
Play a schedule or channel that was configured in the product.
1
Select Local Channel from the Player menu.
――The No channel. message appears if no channel has been registered in Local Channel.
2
Local Channel will run.
Deployed Folders
Play a template stored on a connected USB device.
――The Deployed Folders feature appears only when a USB device containing templates is connected.
My Templates
Play a template in My Templates stored in the internal memory of the product.
Available features in the Player page
The Player list page provides the following features.
•• Device
Select either Internal or USB to search for a desired device list.
-- All / Internal / USB
•• Content
Select a content type as criterion to search for a desired content list.
-- All / Video / Image / PDF / Flash / Office / My Templates
•• Sort By
Specify the content sort criterion.
-- File name / Recently Played
•• Options
Menu items in the Player page
Option Name
Operations
Play Selected
Select and play desired content.
Send
Copy content to another storage device.
Delete
Delete desired content.
Go to Multimedia
Play content using the media play feature.
Settings
Configure detailed properties of content.
――See the following page for details on the Settings feature.
Player page Settings menu
Aspect Ratio
Set Aspect Ratio to either Original or Full.
Settings
•• Full / Original
――This feature is only available for Video, Image, PDF and Office files.
Settings
Display Duration
Set whether to display content in the original aspect ratio or full screen
size.
Set the duration for each page in a slideshow.
――This feature is only available for Image, PDF, Flash and Office files.
Aspect Ratio
Display Duration
Close
Transition Effect
Content Orientation
Landscape
Safely Remove USB
-- The displayed image may differ depending on the model.
Transition Effect
Configure transition effects between pages or scenes in a slideshow or video file.
•• None / Fade1 / Fade2 / Blind / Spiral / Checker / Linear / Stairs / Wipe / Random
――This feature is only available for Image files.
Content Orientation
Switch the orientation of playing content to Landscape or Portrait mode.
•• Landscape / Portrait
――If Content Orientation is Portrait view, it does not support VP8 video codec.
――Source is not available when Content Orientation is set to Portrait.
Safely Remove USB
Safely removes USB memory
Reset Settings
Restore all the values under Settings to the default when the product was purchased.
When Content is Running
Press the INFO button on the remote control.
Viewing the details of the content that is running
Information
Type:
Network Channel
•• Type : Type of channel currently playing
――Only applicable during Network Channel / Local Channel playback.
•• CH Number: Number assigned to the channel currently playing
――Only applicable during Network Channel / Local Channel playback.
•• CH Name: Name of the channel currently playing
――Only applicable during Network Channel / Local Channel playback.
CH Number:
No channels selected
•• Software Version: Displays the software version of a device
CH Name:
No channels selected
•• MAC ID: Displays the original identification number of a device
Software Version:
B2B-EP-MIP-4510
MAC ID:
FF-FF-FF-FF-FF-FF
Tags:
None
•• Tags: Tag settings assigned to a device from the server
――Only applicable during Network Channel / Local Channel playback.
Server:
Not connected
•• Server: Displays the connection status (Connected, Disconnected or Non-Approval) of the server
USB:
Not connected
•• USB: Displays the connection status of a USB device
Storage for Network Channel:
Internal
Schedule download:
No Schedule to download
OK
-- The displayed image may differ depending on the model.
•• Storage for Network Channel: Displays information on the device where the currently active network channel is saved.
――Only applicable during Network Channel / Local Channel playback.
•• Schedule download: Displays the progress of a network schedule being downloaded from the server
Changing the settings for the content that is running
Press the TOOLS button on the remote control during content playback to configure settings such as Picture Mode and
Sound Mode.
•• Playlist
View a list of content items currently playing.
•• Music
Set the background music for the content currently playing.
Playlist
Music
Picture Mode
Sound Mode
Repeat
•• Picture Mode
Customizes the screen settings for the content currently playing
-- Shop & Mall / Office & School / Terminal & Station / Video Wall / Calibration
-- The displayed image may differ depending on the model.
-- This feature is not available when content is playing through Video Wall.
•• Sound Mode
Customizes the audio settings for the content currently playing
-- Standard / Music / Movie / Clear Voice / Amplify
•• Repeat
Set the repeat mode.
-- One / All
File Formats Compatible with Player
•• Supported file systems include FAT32 and NTFS.
•• A file with a vertical and horizontal resolution larger than the maximum resolution cannot be
played.
Check the vertical and horizontal resolution of the file.
•• Check the supported video and audio Codec types and Versions.
•• Check the supported file versions.
-- Flash version up to 10.1 is supported
-- PowerPoint version up to 97 – 2007 is supported
•• Only the last USB device that was connected is recognized.
Network Schedule Multiframe
Template files and LFD(.lfd) files
Restrictions
•• Ensure a distributed folder (content / schedules) exists in Internal / USB memory.
Playback restrictions
•• A maximum of two video (Video) files can be played.
•• More than one Flash file cannot be played.
•• For Office files (PPT and Word files) and PDF files, only one file type is supported at a time.
•• Multiple videos (Video) cannot be played on a single display of a video wall simultaneously.
Sound output restrictions
•• More than one sound output cannot be used.
Playback restrictions
•• A maximum of two video files (Video) can be played simultaneously.
•• In portrait playback mode, only one video file can be played at a time.
•• More than one Flash file cannot be played.
•• For Office files (PPT and Word files) and PDF files, only one file type is supported at a time.
•• LFD(.lfd) files are not supported.
Sound output restrictions
•• More than one sound output cannot be used.
•• Playback priority: Flash file > network BGM > local BGM > video file in the main frame selected
by the user
――Network BGM: Settings can be configured in step 1 when creating a server schedule.
――Local BGM: BGM settings can be configured using the tools displayed after the TOOLS button
is pressed during Player playback.
――User-selected main frame: Main frame settings can be configured in step 2 when creating a
server schedule.
•• Playback priority: Flash file > network BGM > local BGM > video file in the main frame selected
by the user
Contents
File Extension
Container
*.avi
AVI
*.mkv
MKV
*.asf
ASF
*.wmv
MP4
*.mp4
3GP
*.mov
VRO
*.3gp
VOB
*.vro
PS
*.mpg
TS
Video Codec
DivX 3.11 / 4.x / 5.x / 6.x
Resolution
1920 x 1080
Frame rate
(fps)
6~30
Bit rate
(Mbps)
30
AAC
MPEG4 SP / ASP
HE-AAC
WMA
H.264 BP / MP / HP
DD+
MPEG(MP3)
DTS Core
Motion JPEG
G.711(ALaw,μ-Law)
Window Media Video v9
*.tp
*.trp
MPEG2
*.flv
*.vob
*.svi
MPEG1
*.m2ts
*.mts
*.divx
AC3
LPCM
*.mpeg
*.ts
Audio Codec
VP6
640 x 480
4
Video
•• 3D video is not supported.
•• Content with a resolution larger than the
resolution specified in the table above is not
supported.
•• Video content with a Bit rate or Frame rate larger
than the rate specified in the table above can
cause choppy video during playback.
•• Video content will not play, or not play correctly,
if there is an error in the content or the container.
•• Some USB/digital camera devices may not be
compatible with the player.
•• Supports up to H.264, Level 4.1
•• H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and
AVCHD are not supported.
•• For all Video codecs except MVC, VP8, VP6:
-- Below 1280 x 720: 60 frame max
-- Above 1280 x 720: 30 frame max
•• GMC 2 or higher is not supported.
•• Supports only BD MVC Spec.
•• Certain codecs (MVC, VP8 and MJPEG) will not
be supported in the following situations: playing
different file types successively, playing LFD files,
or playing files in portrait mode.
Audio
•• Audio content with a Bit rate or Frame rate
larger than the rate specified in the table above
can cause choppy audio during playback.
•• Video content will not play, or not play
correctly, if there is an error in the content or
the container.
•• Some USB/digital camera devices may not be
compatible with the player.
•• Supports up to WMA 10 Pro 5.1 channel. WMA
lossless audio is not supported.
•• QCELP, AMR NB/WB are not supported.
Image
•• Compatible image file format : Jpeg
•• Supported maximum resolution : 15,360 x 8,640
•• Supported image effects : 9 effects
(Fade1, Fade2, Blind, Spiral, Checker, Linear,
Stairs, Wipe, Random)
Flash
Power Point
•• Compatible with Flash 10.1
•• Flash Animation
-- Compatible file format : SWF
•• Recommended resolution : 960 x 540
-- Caution
Performance comparable to Flash Player
on a Windows operating system cannot be
guaranteed
Optimization is needed during content
creation
•• Flash Video
-- Compatible file format : FLV
-- Video
Codec : H.264 BP
Resolution : 1920 x 1080
-- Audio
Codec : H.264 BP
-- Caution
F4V file format is not supported
Screen Video is not supported
•• Compatible document file formats
-- Extension : ppt, pptx
-- Version : Office 97 ~ Office 2007
•• Functions not supported
-- Animation effect
-- 3D shapes (which will be displayed in 2D)
-- Header and footer (some subitems are not
supported)
-- Word Art
-- Align
A group alignment error may occur
-- Office 2007
SmartArt is not fully supported. 97 out of
115 subitems are supported.
------
Object insertion
Half-width characters
Letter spacing
Charts
Vertical text
some subitems are not supported
-- Slide notes and handout
PDF
•• Compatible document file formats
-- Extension : pdf
•• Functions not supported
-- Content less than 1 pixel not supported
because of performance degradation issue.
-- Masked Image, Tiled Image content not
supported.
-- Content with Rotated Text, not supported.
-- 3D Shadow Effects not supported.
-- Some characters not supported
(Special characters may be corrupted)
WORD
Template files
•• Compatible document file formats
-- Extension : .doc, .docx
-- Version : Office 97 ~ Office 2007
•• Functions not supported
-- Page background effect
-- Some paragraph styles
-- Word Art
-- Align
A group alignment error may occur
-- 3D shapes (which will be displayed in 2D)
-- Office 2007
SmartArt is not fully supported. 97 out of
115 subitems are supported.
-----
Charts
Half-width characters
Letter spacing
Vertical text
some subitems are not supported
-- Slide notes and handout
•• Creation/editing/playback are only available in
Template.
LFD
•• Supported in Network Channel and Local
Channel
•• Compatible document file formats
-- Extension : .lfd
File Formats Compatible with Videowall
――Refer to the <MagicInfo Server user's manual> for further details.
Video
Image
•• 3D video is not supported.
•• Compatible image file format : Jpeg, bmp, png
•• Content with a resolution larger than the resolution specified in the table
above is not supported.
•• Supported maximum resolution : 15,360 x 8,640
――A higher resolution image may take longer to display on the screen.
•• Video content with a Bit rate or Frame rate larger than the rate specified in
the table above can cause choppy video during playback.
•• Video content will not play, or not play correctly, if there is an error in the
content or the container.
•• Some USB/digital camera devices may not be compatible with the player.
•• Supports up to H.264, Level 4.1
•• H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported.
•• For all Video codecs except MVC, VP8, VP6:
-- Below 1280 x 720: 60 frame max
-- Above 1280 x 720: 30 frame max
•• GMC 2 or higher is not supported.
•• Supports only BD MVC Spec.
•• Some codecs may not be supported in portrait playback mode.
Restrictions
•• Only one video (Video) file can be played per client.
――Different content files can be played on the displays of a video wall.
Two video (Video) files cannot be played on a single display of a video wall.
Available
Available
Not available
Schedule
Available features in the Schedule page
The Schedule page provides the following features.
→ Schedule → ENTER E
HOME
Schedule
Type : Local
Device : Internal
Options
Schedule your content on a local channel or edit existing channels.
Playing Time
[CH1]Channel 1
[CH2]Channel 2
[CH3]Channel 3
12:00 am
12:30 am
Add content to create
a program on the
channel.
01:30 am
02:00 am
02:30 am
03:00 am
04:00 am
04:30 am
05:00 am
05:30 am
•• Device
-- Display the name of a connected storage device.
――This option only activates if Type is set to Local in Device.
•• Options
01:00 am
03:30 am
•• Type
-- Local: Add or edit schedules.
-- Network: View the network schedule configured on the server.
+ Add Program
Schedule your content on
CH 2.
Schedule your content on
CH 3.
Configure the display
duration to set how
long each item of
content will play for.
Set a start time and
a stop time for the
program.
Menu items in the Schedule page
Option Name
Operations
06:00 am
Send
Send configured schedules to another storage device. This is similar to the "copy" feature
on PCs.
Delete
Delete schedules.
Settings
The default content plays on a channel that does not contain program information.
Configuring channel schedules
Play media content such as videos, photos and music at a desired time.
1
Select a channel to configure.
2
Select video, music and photo content you want to apply to the channel schedule.
3
Set the time to play the schedule. (Start Time ~ Stop Time)
4
Change the channel schedule name, and then select a destination folder to save to.
5
Press the Save button.
――Only applicable when Type is set to Local.
Editing a channel schedule.
Change settings for a configured channel schedule such as content, the duration and the schedule name.
1
Select a channel to edit.
2
Select video, photo or music content to edit in the channel schedule.
-- Deleting content: Place the cursor over the desired content and then press the E button to delete it.
-- Move to the far right end of the content list. Click the + button to add content or change the playback order of content items.
3
Set the time to play the schedule. (Start Time ~ Stop Time)
4
Change the channel schedule name, and then select a destination folder to save to.
5
Press the Save button.
――Only applicable when Type is set to Local.
Template
HOME
Available features in the Template page
Create unique content using templates. It is easy to create content. Simply change images and text in a
template.
→ Template → ENTER E
Template
Sort the template list using the following criteria.
Market : All
Select a template to customize.
My Templates
Layout : Landscape
1 / 64 item(s)
•• Market
•• Layout
-- Landscape: Select this mode when using the product in landscape orientation.
-- Portrait: Select this mode when using the product in portrait orientation.
1
Select a template from the provided sample templates.
Template
Select in the editable zone to add content or edit the existing text.
-- The displayed image may differ depending on the model.
Preview
Cancel
Save
New town
interior design
Sustainble evolution unfolods tomorrw’s design
Background Screen
Background Music
Off
2
Organize a template by inserting text, video, photo, or PDF files as desired.
Inserting content such as videos, photos and PDF files
Entering text
Template
Select in the editable zone to add content or edit the existing text.
Edit
Template
Item(s) selected
Select in the editable zone to add content or edit the existing text.
Select to delete
picture1.jpg
Hide Element
Preview
Cancel
New town
interior design
Edit Text
Font option
Show
Content Default Duration
00:00:05
Aspect Ratio
Mute
Done
Save
Cancel
Sustainble evolution unfolods tomorrw’s design
Background Screen
Background Music
Off
Edit Text
Select the Edit Text window to enter text.
Font option
Configuring the background image/background music
Template
Select in the editable zone to add content or edit the existing text.
Background Screen
Device : All
Font Size: Specify the text size for the message.
Font Color: Specify the text color for the message.
..
bg_common_02.jpg
bg_common_04.jpg
bg_common_03.jpg
bg_common_05.jpg
bg_common_06.jpg
bg_common_10.jpg
bg_commo
bg_common_07.jpg
bg_common_11.jpg
bg_commo
Background Color: Specify the background color for the message.
Background Opacity: Specify the background transparency for the message.
Alignment: Select a message alignment mode.
Scroll: Specify the scroll direction/speed for the message.
Hide Element: Display or hide a message.
――Selecting Hide does not reset the message settings.
Reset: Reset all settings in Font option to default settings.
bg_common_01.jpg
Done
Cancel
3
Preview
Configure Template Name and Storage.
Save
Duration
23:59:59
Template Name
Template preview is running. It will disappear
after 20 seconds.
Storage
1
Preview the created template using the Preview feature.
2
To save the template, press the Save button.
Internal
Save
New town
interior design
Sustainble evolution unfolods tomorrw’s design
Template1
4
Cancel
Press the Save button to finish creating the content.
Clone Product
HOME
→ Clone Product → ENTER E
Clone Product
Export the product settings to a USB device or load the settings via a USB device.
This option is useful when assigning the same settings to several products.
When USB does not contain a duplicate file
1
Connect the USB device to a USB port. Run the Clone Product function.
2
The No cloning file found on the USB device. Copy system settings from this product to the USB storage device?
message appears.
-- The displayed image may differ depending on the model.
When USB contains a duplicate file
1
Connect the USB device to a USB port. Run the Clone Product function.
2
The Cloning file found. Please select an option. message appears.
Run the Clone from USB or Clone to USB function.
-- Clone from USB: Apply the USB device settings to the product.
-- Clone to USB: Copy the product settings to the USB device.
――After configuration is complete, the product is rebooted automatically.
ID Settings
HOME
→ ID Settings → ENTER E
ID Settings
Assign an ID to a set.
Press u/d to select a number, and press E.
Device ID
Enter the ID number of the product connected to the input cable for input signal reception. (Range: 0~224)
――Enter the number you want using the number buttons on the remote control.
PC Connection Cable
-- The displayed image may differ depending on the model.
Select a method to connect to MDC to receive the MDC signal.
•• RS232C cable
Communicate with MDC via the RS232C-stereo cable.
•• RJ45(LAN) cable
Communicate with MDC via the RJ45 cable.
Device ID Auto Set
――Assign ID number automatically for all connected products.
Video Wall
HOME
→ Video Wall → ENTER E
Video Wall
Customize the layout of multiple displays that are connected to form a video wall.
In addition, display part of a whole picture or repeat the same picture on each of the connected multiple displays.
To display multiple images, refer to MDC Help or the MagicInfo user guide. Some models may not support the MagicInfo
function.
Apply to
•• Current Source (screen output from a device connected to Source): Configure videowall features for the screen output
from an external device connected to the product.
-- The displayed image may differ depending on the model.
•• MagicInfo Player S: Configure videowall features for content saved in the product or content saved on a USB memory or
SD card.
Restrictions
――Playback may be initially choppy if video files of different resolutions play successively (i.e., 1280x720 content plays after
1920x1080 content) or an image file and a video file play one after the other.
Video
•• Supported resolution
-- 1920 x 1080 @ 24p/30p
-- 1280 x 720 @ 24p/30p/60p
•• HEVC and 3D images are not supported.
Image
•• Compatible image file format: Jpeg, png, bmp
•• Supported maximum resolution
-- jpeg: 15360 x 8640
-- png: 4096 x 4096
-- bmp: 4096 x 4096
Video Wall
You can activate or deactivate Video Wall.
To organize a video wall, select On.
•• Off / On
Horizontal x Vertical
This feature automatically splits a videowall display based on a videowall matrix configuration.
Enter the videowall matrix.
The videowall display is split based on the configured matrix. The number of vertical or horizontal display devices can be set within the range 1 and 15.
――A videowall display can be split into a maximum of 225 screens.
――The Horizontal x Vertical option is only enabled when Video Wall is set to On.
Screen Position
To rearrange split screens, adjust the number for each product in the matrix using the Screen Position feature.
Selecting Screen Position will display the videowall matrix with the numbers assigned to the products that form the videowall.
To rearrange products, use the direction buttons on the remote control to move a product to another desired number. Press the E button.
•• All Displays: Assign screen positions to All displays. Then, you don't need to set up video wall for individual displays.
•• Current Displays: Only Assign screen position for this first display.
――Screen Position can be set up with a maximum of 15x15 split screens (225 devices). If connected using DP Loopout mode, the maximum number of devices changes
to 100.
――The Screen Position option is only enabled when Video Wall is set to On.
――To use the function, make sure Horizontal x Vertical is configured.
Format
Select how to display images on the videowall display.
•• Full: Display images in full screen with no margin.
•• Natural: Display images in the original aspect ratio without enlarging or reducing the size.
――The Format option is only enabled when Video Wall is set to On.
Network Status
HOME
→ Network Status → ENTER E
Network Status
-- The displayed image may differ depending on the model.
Check the current network and Internet connection.
Picture Mode
HOME
→ Picture Mode → ENTER E
Picture Mode
Select a picture mode (Picture Mode) suitable for the environment where the product will be used.
•• Shop & Mall
Suitable for shopping malls.
-- Select either Video/Image or Text depending on the picture mode.
•• Office & School
Suitable for offices and schools.
-- Select either Video/Image or Text depending on the picture mode.
•• Terminal & Station
Suitable for bus terminals and train stations.
-- The displayed image may differ depending on the model.
-- Select either Video/Image or Text depending on the picture mode.
•• Video Wall
Suitable for environments where videowall display are used.
-- Select either Video/Image or Text depending on the picture mode.
•• Calibration
In this mode, the brightness, color, gamma and uniformity settings customized using the color calibration program
Advanced Color Management are applied.
-- To apply the Calibration mode properly, make sure you configure the picture quality settings, such as brightness,
color, gamma and uniformity, using the color calibration program Advanced Color Management.
-- To download the Advanced Color Management program, visit www.samsung.com/displaysolutions.
On/Off Timer
HOME
→ On/Off Timer → ENTER E
――You must set Clock Set before you can use this feature.
On Timer
Set On Timer so that your product turns on automatically at a time and on a day of your choosing.
The power is turned on with the specified volume or input source.
On/Off Timer
On Timer: Set the on timer by making a selection from one of the seven options. Ensure you set the current time first.
(On Timer 1 ~ On Timer 7)
-- The displayed image may differ depending on the model.
•• Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.
If you select Manual, you can choose the days you want On Timer to turn on your product.
-- The check mark indicates days you’ve selected.
•• Time: Set the hour and minute. Use the number buttons or the up and down arrow keys to enter numbers. Use the left
and right arrow buttons to change entry fields.
•• Volume: Set the desired volume level. Use the left and right arrow buttons to change the volume level.
•• Source: Select the input source of your choice.
•• Antenna (when the Source is set to TV): Select Air or Cable.
•• Channel (when the Source is set to TV): Select the desired channel.
•• Content (when the Source is set to Internal/USB): From the USB device or internal memory device, select a folder
containing content you want to play when the product turns on. Content can include music, photo or video files.
――This function is available only when a USB device is connected.
――If there is no music file on the USB device or you don’t select a folder containing a music file, the Timer function does not
operate correctly.
――If there is only one photo file in the USB, the Slide Show will not play.
――If a folder name is too long, the folder cannot be selected.
――Each USB you use is assigned its own folder. When using more than one of the same type of USB, make sure the folders
assigned to each USB have different names.
――We recommend that you use a USB memory stick and a multi card reader when using On Timer.
――The On Timer function may not work with USB devices with a built-in battery, MP3 players, or PMPs made by some
manufacturers because the product can take too long to recognize these devices.
Off Timer
Set the off timer (Off Timer) by making a selection from one of the seven options. (Off Timer 1 ~ Off Timer 7)
•• Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.
If you select Manual, you can choose the days you want Off Timer to turn off your product.
-- The check mark indicates days you’ve selected.
•• Time: Set the hour and minute. Use the number buttons or the up and down arrow keys to enter numbers. Use the left
and right arrow buttons to change entry fields.
Holiday Management
Timer will be disabled during a period specified as a holiday.
•• Add Holiday: Specify the period you want to add as a holiday.
Select the start and end dates of the holiday you want to add using the u/d buttons, and click the Save button.
The period will be added to the list of holidays.
-- Start: Set the start date of the holiday.
-- End: Set the end date of the holiday.
――Delete: Delete selected items from the list of holidays.
――Edit: Select a holiday item and then change the date.
•• Set Applied Timer: Set the On Timer and Off Timer to not activate on public holidays.
-- Press E to select the On Timer and Off Timer settings you do not want to activate.
-- The selected On Timer and Off Timer will not activate.
Ticker
HOME
→ Ticker → ENTER E
Input text while a video or image is displayed and display the text on the screen.
•• Off / On
•• Message: Enter a message to display on the screen.
•• Time: Set the Start Time and End Time to display a Message.
•• Font Options: Specify the text font and color for the message.
Ticker
•• Position: Select an orientation to display a Message.
•• Scroll: Specify the scroll Direction and Speed for the message.
•• Preview: Preview configured caption settings.
-- The displayed image may differ depending on the model.
More settings
HOME
→ More settings → ENTER E
More settings
-- The displayed image may differ depending on the model.
The picture settings menu appears.
URL Launcher
HOME
For details on how to use the URL Launcher feature, contact the dealer the product was purchased from.
――To use the URL Launcher feature, set Play via to URL Launcher in System.
→ URL Launcher → ENTER E
Change URL
pm
12:00
URL Launcher
January 1 2014
Clone Product
ID Settings
Video Wall
Network Status
Picture Mode
On/Off Timer
Ticker
More settings
-- The displayed image may differ depending on the model.
Screen Adjustment
Configure the Picture settings (Backlight, Color Tone, etc.).
The layout of the Picture menu options may vary depending on the product.
Picture Mode
Select a picture mode (Picture Mode) suitable for the environment where the product will be used.
•• Shop & Mall
Suitable for shopping malls.
MENU m → Picture → Picture Mode → ENTER E
-- Select either Video/Image or Text depending on the picture mode.
•• Office & School
Suitable for offices and schools.
Picture
Picture Mode
-- Select either Video/Image or Text depending on the picture mode.
Terminal & Station
· Backlight
100
· Contrast
70
· Brightness
45
· Sharpness
65
· Color
50
· Tint (G/R)
G50R50
-- The displayed image may differ depending on the model.
•• Terminal & Station
Suitable for bus terminals and train stations.
-- Select either Video/Image or Text depending on the picture mode.
•• Video Wall
Suitable for environments where videowall display are used.
-- Select either Video/Image or Text depending on the picture mode.
•• Calibration
In this mode, the brightness, color, gamma and uniformity settings customized using the color calibration program
Advanced Color Management are applied.
-- To apply the Calibration mode properly, make sure you configure the picture quality settings, such as brightness,
color, gamma and uniformity, using the color calibration program Advanced Color Management.
-- To download the Advanced Color Management program, visit www.samsung.com/displaysolutions.
Backlight / Contrast / Brightness /
Sharpness / Color / Tint (G/R)
MENU m → Picture → ENTER E
Picture
Picture Mode
Picture Mode
Shop & Mall, Office & School,
Terminal & Station, Video Wall
Picture Mode settings
Terminal & Station
100
· Contrast
70
· Brightness
45
· Sharpness
65
· Color
50
G50R50
-- The displayed image may differ depending on the model.
Adjustable options
Video/Image
Backlight / Contrast / Brightness / Sharpness /
Color / Tint (G/R)
Text
Backlight / Contrast / Brightness / Sharpness
Calibration
· Backlight
· Tint (G/R)
Your product has several options for adjusting picture quality.
Backlight
――When you make changes to Backlight, Contrast, Brightness, Sharpness, Color or Tint (G/R), the OSD will be adjusted
accordingly.
――You can adjust and store settings for each external device you have connected to an input on the product.
――Lowering picture brightness reduces power consumption.
Color Temperature
Adjust the color temperature (Red / Green / Blue). (Range: 2800K–16000K)
――Enabled when Color Tone is set to Off.
MENU m → Picture → Color Temperature → ENTER E
Picture
Color Temperature
10000K
-- The displayed image may differ depending on the model.
――If Picture Mode is set to Calibration, Color Temperature is disabled.
White Balance
2 Point
Adjust the color temperature for a more natural picture.
MENU m → Picture → White Balance → ENTER E
Picture
White Balance
•• R-Offset / G-Offset / B-Offset: Adjust each color’s (red, green, blue) darkness.
•• R-Gain / G-Gain / B-Gain: Adjust each color’s (red, green, blue) brightness.
•• Reset: Suitable for environments where videowall display are used.
10 Point
Controls the white balance in 10 point interval by adjusting the red, green, and blue brightness.
10 Point
•• Off / On
Level: Select interval to adjust.
-- The displayed image may differ depending on the model.
Red: Adjust the red level.
Green: Adjust the green level.
Blue: Adjust the blue level.
Reset: Suitable for environments where videowall display are used.
――Some external devices may not support this function.
――Enabled when Picture Mode is set to Office & School (Video/Image).
Gamma
Adjust the primary color intensity.
――If Picture Mode is set to Calibration, Gamma is disabled.
MENU m → Picture → Gamma → ENTER E
Picture
Gamma
0
-- The displayed image may differ depending on the model.
Calibrated Value
Select whether to apply the brightness, color, gamma and uniformity settings customized using the color calibration program
Advanced Color Management to the Information and Advertisement modes.
MENU m → Picture → Calibrated Value → ENTER E
•• Don't Apply / Apply
――To download the Advanced Color Management program, visit www.samsung.com/displaysolutions.
――If Picture Mode is set to Calibration, Calibrated Value is disabled.
Picture
Calibrated Value
-- The displayed image may differ depending on the model.
Advanced Settings
Picture Mode
MENU m → Picture → Advanced Settings → ENTER E
Advanced Settings
Dynamic Contrast
Terminal & Station
Adjustable options
Video/Image
Dynamic Contrast / Black Tone / Flesh Tone /
RGB Only Mode / Color Space
Text
Dynamic Contrast / Black Tone
Video/Image
Dynamic Contrast / Black Tone / Flesh Tone /
RGB Only Mode / Color Space / Motion
Lighting
Text
Dynamic Contrast / Black Tone
Medium
Black Tone
Darker
Flesh Tone
0
RGB Only Mode
Color Space
Shop & Mall, Office & School,
Video Wall
Picture Mode settings
Off
Native
Motion Lighting
-- The displayed image may differ depending on the model.
Off
――If Picture Mode is set to Calibration, Advanced Settings is disabled.
Dynamic Contrast
Advanced Settings
Dynamic Contrast
Medium
Black Tone
Darker
Flesh Tone
0
RGB Only Mode
Color Space
Off
Native
Motion Lighting
Off
Adjust the screen contrast.
•• Off / Low / Medium / High
Black Tone
Select the black level to adjust the screen depth.
•• Off / Dark / Darker / Darkest
Flesh Tone
Emphasize pink Flesh Tone.
RGB Only Mode
-- The displayed image may differ depending on the model.
Displays the Red, Green and Blue color for making fine adjustments to the hue and saturation.
•• Off / Red / Green / Blue
Color Space
Adjusts the range and variety of colors (the color space) available to create images.
•• Auto / Native / Custom
――To adjust Color, Red, Green, Blue and Reset, set Color Space to Custom.
Motion Lighting
Reduces power consumption by reducing screen brightness when the picture on the screen is in motion.
•• Off / On
Picture Options
Picture Mode
MENU m → Picture → Picture Options → ENTER E
Shop & Mall, Office & School,
Terminal & Station, Video Wall
Picture Options
Color Tone
Off
Digital Clean View
Off
MPEG Noise Filter
Off
HDMI Black Level
Normal
Film Mode
Off
Auto Motion Plus
Off
Dynamic Backlight
Off
-- The displayed image may differ depending on the model.
Calibration
Picture Mode settings
Adjustable options
Video/Image
Color Tone / Digital Clean View / MPEG Noise
Filter / HDMI Black Level / Film Mode / Auto
Motion Plus / Dynamic Backlight
Text
Color Tone / HDMI Black Level / Film Mode /
Dynamic Backlight
HDMI Black Level / Dynamic Backlight
Color Tone
Picture Options
If the input source is PC, DVI or HDMI1, HDMI2, HDMI3 (PC connection), DisplayPort.
Color Tone
Off
Digital Clean View
Off
If the input source is AV, Component, HDMI1, HDMI2, HDMI3 or TV.
MPEG Noise Filter
Off
•• Off / Cool / Standard / Warm1 / Warm2
――If Picture Mode is set to Calibration, Color Tone is disabled.
HDMI Black Level
Normal
Film Mode
Off
Auto Motion Plus
Off
Dynamic Backlight
Off
-- The displayed image may differ depending on the model.
•• Off / Cool / Standard / Warm
――Settings can be adjusted and stored for each external device connected to an input on the product.
Digital Clean View
If the broadcast signal received by your product is weak, you can activate the Digital Clean View feature to reduce any static
and ghosting that may appear on the screen.
•• Off / Low / Medium / High / Auto / Auto Visualization
――Auto Visualization: When changing analog channels, displays signal strength.
――Received signal intensity is the strongest when the bar is green.
――When the signal is weak, try all the options until the the product displays the best picture.
MPEG Noise Filter
Reduces MPEG noise to provide improved picture quality.
•• Off / Low / Medium / High / Auto
HDMI Black Level
Picture Options
Color Tone
Off
Digital Clean View
Off
MPEG Noise Filter
Off
HDMI Black Level
Normal
Selects the black level on the screen to adjust the screen depth.
•• Low / Normal
――Available only in HDMI1, HDMI2, HDMI3 and DVI mode (AV Timing : 480p, 576p, 720p, 1080i, 1080p).
Film Mode
This mode is suitable to view movies.
Film Mode
Off
Sets the product to automatically sense and process film signals from all sources and adjust the picture for optimum quality.
Auto Motion Plus
Off
•• Off / Auto1 / Auto2
――Available in TV, AV, Component (480i / 1080i), HDMI1, HDMI2, HDMI3 (1080i).
Dynamic Backlight
Off
Auto Motion Plus
Removes blur and judder from scenes with larger amounts of rapid movement to provide a clearer picture.
-- The displayed image may differ depending on the model.
The menu names may vary depending on the country.
Off : Switches Auto Motion Plus off.
Clear : Sets Auto Motion Plus to Clear (suitable for viewing moving images clearly) mode.
Standard : Sets Auto Motion Plus to Standard mode.
Smooth : Sets Auto Motion Plus to Smooth (suitable for viewing moving images naturally) mode.
Custom : Use to reduce the afterimage and judder as much as you want.
•• Blur Reduction : Use to reduce the afterimage as much as you want.
-- This is only supported if the Auto Motion Plus is set to Custom.
•• Judder Reduction : Use to reduce the judder as much as you want.
-- This is only supported if the Auto Motion Plus is set to Custom.
•• LED Clear Motion : Make moving images look more clear.
-- This is only supported if the Auto Motion Plus is set to Custom.
•• Reset: Restore Auto Motion Plus settings to default values.
-- The color on screen may vary with this option unintentionally.
-- Disabled when PIP is set to On.
Dynamic Backlight
Automatically adjust the backlight to provide the best possible screen contrast under the current conditions.
•• Off / On
――The Dynamic Backlight is not available when the input source is set to PC, AV, Component or TV while Video Wall is On.
Picture Size
choose size and aspect ratio picture displayed on screen.
Picture Size
MENU m → Picture → Picture Size → ENTER E
――Different screen adjustment options are displayed depending on the current input source.
•• 16:9: Sets the picture to 16:9 wide mode.
Picture Size
Picture Size
•• Zoom1: Use for moderate magnification. Cuts off the top and sides.
16:9
•• Smart View 1: Reduces the 16:9 picture by 50%.
――Smart View 1 is enabled only in HDMI1, HDMI2, HDMI3 mode.
· Position
Resolution
•• Zoom2: Use for a stronger magnification.
Off
•• Smart View 2: Reduces the 16:9 picture by 25%.
――Smart View 2 is enabled only in HDMI1, HDMI2, HDMI3 or DTV mode.
•• Wide Fit: Enlarges the aspect ratio of the picture to fit the entire screen.
-- The displayed image may differ depending on the model.
•• 4:3: Sets the picture to basic (4:3) mode.
――Do not set your product to 4:3 format for a long time.
The borders displayed on the left and right, or top and bottom of the screen may cause image retention (screen burn)
which is not covered by the warranty.
•• Screen Fit: Displays the full image without any cut-off when PC, DVI, HDMI1, HDMI2, HDMI3 (720p / 1080i / 1080p) or
Component (1080i / 1080p) signals are inputted.
•• Custom: Changes the resolution to suit the user's preferences.
•• Original Ratio: If the input source is PC, DVI, HDMI1, HDMI2, HDMI3 (PC connection), DisplayPort, the video will
display in the original aspect ratio.
――Available ports may differ depending on the model.
Position
Adjusts the picture position. Position is only available if Picture Size is set to Zoom1, Zoom2, Wide Fit, Screen Fit or Custom.
――To use the Position function after selecting Zoom1, Zoom2, Wide Fit, Screen Fit or Custom, follow these steps.
Picture Size
Picture Size
Custom
· Position
Resolution
1
Press the d button to select Position. Press the E button.
2
Press the u or d button to move the picture up or down.
3
Press the E button.
Off
-- The displayed image may differ depending on the model.
Zoom/Position
Adjusts the picture zoom and position. This option is available when the input source is set to HDMI1, HDMI2, HDMI3 (1080i /
1080p) or Component (1080i / 1080p). Picture Size must be set to Custom for the option to be available.
Picture Size
Picture Size
Custom
· Zoom/Position
Resolution
Off
1
Press the d button to select Zoom/Position. Press the E button.
2
Select the Zoom or Position. Press the E button.
3
Press the u/d/l/r button to move the picture.
4
Press the E button.
――If you want to reset the picture to its original position, select Reset in the Zoom/Position screen.
-- The displayed image may differ depending on the model.
――The picture will be set to its default position.
Resolution
If the picture is not normal even when the resolution of the graphics card is one of the following, you can optimize the picture
quality by selecting the same resolution for the product as the PC using this menu.
Available resolutions: Off / 1024x768 / 1280x768 / 1360x768 / 1366x768
Auto Adjustment
Adjust frequency values/positions and fine tune the settings automatically.
MENU m → Picture → Auto Adjustment → ENTER E
Picture
Auto Adjustment
-- Available in PC mode only.
-- The displayed image may differ depending on the model.
PC Screen Adjustment
MENU m → Picture → PC Screen Adjustment → ENTER E
Picture
•• Coarse / Fine
Removes or reduces picture noise.
If the noise is not removed by Fine-tuning alone, use the Coarse function to adjust the frequency as best as possible
(Coarse) and Fine-tune again. After the noise has been reduced, re-adjust the picture so that it is aligned with the center
of screen.
•• Position
To adjust the PC’s screen position if it is not centered or does not fit the product screen.
Press the ▲ or ▼ button to adjust the Vertical Position. Press the ◄ or ► button to adjust the Horizontal Position.
PC Screen Adjustment
-- Available in PC mode only.
-- The displayed image may differ depending on the model.
•• Image Reset
Resets the image to the default settings.
Picture Off
Selecting Picture Off switches off the screen. The volume is not disabled.
To switch the screen on, press any button other than the volume button.
MENU m → Picture → Picture Off → ENTER E
Picture
Picture Off
-- The displayed image may differ depending on the model.
Reset Picture
MENU m → Picture → Reset Picture → ENTER E
Picture
Reset Picture
-- The displayed image may differ depending on the model.
Resets your current picture mode to its default settings.
OnScreen Display
PIP
PIP Settings
MENUm → OnScreen Display → PIP → ENTERE
The picture from the external video source will be in the main screen and the picture from the product will be in the PIP subpicture screen.
Main picture
OnScreen Display
PIP
Rotation
Screen Protection
Message Display
Menu Transparency
Medium
Menu Language
English
Caption
Off
-- The displayed image may differ depending on the model.
-- For PIP sound, refer to the Sound Select instructions.
-- If you turn the product off while watching in the PIP mode, PIP mode will remain after power
Off/On.
-- You may notice that the picture in the PIP screen becomes slightly unnatural when you use
the main screen to view a game or karaoke.
Sub picture
PC / DVI / HDMI / DisplayPort
TV / AV / Component
AV
PC / DVI / HDMI1 / HDMI2 / HDMI3 / DisplayPort
Component
TV/ PC / DVI / HDMI1 / HDMI2 / HDMI3 / DisplayPort
TV
PC / Component / DVI / HDMI1 / HDMI2 / HDMI3 / DisplayPort
•• PIP (Off / On): Activate or deactivate the PIP function.
PIP
•• Source: You can select a source of the sub picture.
•• Antenna (Air / Cable): Select either Air or Cable as the input source for the sub-screen.
――This option is enabled if the secondary display is set to TV.
PIP
On
Source
TV
Antenna
Air
Channel
Air 4
•• Channel: Select the channel for the sub-screen.
――This option is enabled if the secondary display is set to TV.
Size
Õ
•• Size (
Position
Ã
•• Position (
,
,
,
,
): Select a position for the sub-picture.
――In double (
,
,
,
) mode, you cannot select Position.
Sound Select
Main
OK
-- The displayed image may differ depending on the model.
,
,
,
,
,
,
): Select a size for the subpicture.
•• Sound Select (Main / Sub): You can choose to listen to the sound from the Main picture or the Sub picture.
Rotation
Rotate Menu
Configure the menu screen.
MENUm → OnScreen Display → Rotation → ENTERE
•• Landscape: Display the menu in landscape mode (default).
•• Portrait: Display the menu in portrait mode on the right side of the product screen.
Rotation
Rotate Content
Rotate Menu
Landscape
Rotate Content
Landscape
•• Landscape: Display the screen in landscape mode (default).
Aspect Ratio
Full Screen
•• Portrait: Display the screen in portrait mode.
Rotate the product screen orientation.
Aspect Ratio
-- The displayed image may differ depending on the model.
Set the rotated screen to be either full screen or original.
•• Full Screen: Display the rotated screen in full screen.
•• Original: Display the rotated screen in the original aspect ratio.
――Available only when Rotate Content is set to Portrait.
Screen Protection
Auto Protection Time
MENUm → OnScreen Display → Screen Protection → ENTERE
If the screen displays a still image for a certain period of time you define, the product activates the screen saver to prevent the
formation of burnt in ghost images on the screen.
•• Off / 2 hours / 4 hours / 8 hours / 10 hours
Screen Protection
Auto Protection Time
Screen Burn Protection
Screen Burn Protection
Off
To reduce the possibility of screen burn, this unit is equipped with Screen Burn Protection screen burn prevention
technology.
Screen Burn Protection moves the picture slightly on the screen.
The Screen Burn Protection Time setting allows you to program the time between movements of the picture in minutes.
-- The displayed image may differ depending on the model.
Pixel Shift
Minimize image retention by finely moving pixels horizontally or vertically.
•• Pixel Shift (Off / On)
――Horizontal, Vertical and Time are enabled only when Pixel Shift is set to On.
•• Horizontal: Sets how many pixels the screen moves horizontally.
•• Vertical: Sets how many pixels the screen moves vertically.
•• Time: Set the time interval for performing the horizontal or vertical movement, respectively.
Available Pixel Shift Settings and Optimum Settings.
Available Settings
Optimum Settings
Horizontal (pixels)
0~4
4
Vertical (pixels)
0~4
4
Time (minute)
1 min. ~ 4 min.
4 min.
――The Pixel Shift value may differ depending on the product size (inches) and mode.
――Displaying a still image or a 4:3 output for an extended period of time may cause image retention. This is not a defect in the
product.
――If Picture Size is set to Screen Fit, Pixel Shift is disabled.
Timer
Screen Burn Protection
You can set the timer for Screen Burn Protection.
Pixel Shift
The Screen Burn Protection feature stops automatically after a specified period of time.
Timer
Timer
Immediate Display
Off
Side Gray
Off
-- The displayed image may differ depending on the model.
Off
Repeat: Display the image retention-preventive pattern set in Mode at specified time intervals(Period).
Interval: Display the image retention-preventive pattern set in Mode for a specified period of time (from Start Time to End
Time).
――Mode, Period, Time, Start Time and End Time are enabled only when Timer is set to Repeat or Interval.
•• Mode: Select a screen protective pattern to display.
-- Pixel: Pixels on the screen alternate black continuously.
-- Rolling Bar: A vertical bar moves left to right.
-- Fading Screen: The entire screen becomes brighter, then darker.
――The Rolling Bar and Fading Screen patterns appear only once regardless of the specified repeat period or time.
•• Period: Specify the time interval to activate the Screen Burn Protection function.
――The option is enabled when Repeat is selected for Timer.
•• Time: Specify the duration to keep the Screen Burn Protection function on.
――Enabled when Timer is set to Repeat and Mode is set to Pixel.
•• Start Time: Set the start time to activate the screen protection function.
――The option is enabled when Interval is selected for Timer.
•• End Time: Set the end time to deactivate the screen protection function.
――The option is enabled when Interval is selected for Timer.
Immediate Display
Screen Burn Protection
Select the screen saver you want to display immediately.
Pixel Shift
•• Off / Pixel / Rolling Bar / Fading Screen
Timer
Side Gray
Immediate Display
Off
Side Gray
Off
When the screen is set to 4:3 aspect ratio, adjust the brightness of white margins on sides to protect the screen.
•• Off / Light / Dark
-- The displayed image may differ depending on the model.
Message Display
Source Info
Select whether to display the source OSD when the input source changes.
MENUm → OnScreen Display → Message Display → ENTERE
•• Off / On
No Signal Message
Message Display
Source Info
On
No Signal Message
On
MDC Message
On
Select whether to display the no-signal OSD when no signal is detected.
•• Off / On
MDC Message
Select whether to display the MDC OSD when the product is controlled by the MDC.
•• Off / On
-- The displayed image may differ depending on the model.
Menu Transparency
Adjust transparency of menu box.
•• High / Medium / Low
MENU m → OnScreen Display → Menu Transparency → ENTER E
OnScreen Display
Menu Transparency
Medium
-- The displayed image may differ depending on the model.
Menu Language
Set the menu language.
――A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other functions
on your PC.
MENU m → OnScreen Display → Menu Language → ENTER E
OnScreen Display
Menu Language
English
-- The displayed image may differ depending on the model.
Caption
Caption
You can switch the caption function on or off.
MENUm → OnScreen Display → Caption → ENTERE
•• Off / On
――The Caption feature does not work with devices connected to the product through the Component, HDMI1, HDMI2,
HDMI3, DVI or PC input jacks.
Caption
Caption
Caption Mode
If captions are not available, they will not be displayed on the screen.
Off
Default
Digital Caption Options
-- The displayed image may differ depending on the model.
Caption Mode
You can select the desired caption mode.
――The availability of captions depends on the program being Broadcasted.
•• Default / CC1 ~ CC4 / Text1 ~ Text4: The analog Caption function operates in either analog product channel mode or
when a signal is supplied from an external device to the product.
(Depending on the Broadcasting signal, the analog Caption function may or may not work with digital channels.)
Digital Caption Options
Caption
Caption
Caption Mode
Off
Default
Digital Caption Options
-- The displayed image may differ depending on the model.
(digital channels only)
Configure the subtitle settings such as size and color.
Adjusts the each option. When done, select Close.
•• Size: Options include Default, Small, Standard and Large. The default is Standard.
•• Font Color: You can change the color of the letters. Options include Default, White, Black, Red, Green, Blue, Yellow,
Magenta and Cyan. The default is White.
•• Background Color: You can change the background color of the caption. Options include Default, White, Black, Red,
Green, Blue, Yellow, Magenta and Cyan. The default is Black.
•• Font Opacity: This adjusts the opacity of text. Options include Default, Transparent, Translucent, Solid and Flashing.
•• Background Opacity: This adjusts the opacity of the caption background. Options include Default, Transparent,
Translucent, Solid and Flashing.
――You cannot set both the Font Color and the Background Color to the same color.
Reset OnScreen Display
MENU m → OnScreen Display → Reset OnScreen Display → ENTER E
OnScreen Display
Reset OnScreen Display
-- The displayed image may differ depending on the model.
This option returns the current settings under OnScreen Display to the default factory settings.
Sound Adjustment
Configure the sound (Sound) settings for the product.
Sound Mode
You can select a sound mode to suit your personal preferences.
•• Standard: Selects the normal sound mode.
•• Music: Emphasizes music over voices.
MENU m → Sound → Sound Mode → ENTER E
•• Movie: Provides the best sound for movies.
•• Clear Voice: Emphasizes voices over other sounds.
Sound
Sound Mode
Standard
Sound Effect
HDMI Sound
Sound on Video Call
AV(HDMI)
Current Source
Speaker Settings
Auto Volume
Reset Sound
-- The displayed image may differ depending on the model.
Off
•• Amplify: Increase the intensity of high-frequency sound to allow a better listening experience for the hearing impaired.
――If Speaker Settings is set to External, Sound Mode is disabled.
Sound Effect
Configure your preferred sound effect for output sound.
――If Speaker Settings is set to External, Sound Effect is disabled.
――Available only when Sound Mode is set to Standard.
MENUm → Sound → Sound Effect → ENTERE
Virtual Surround
Sound Effect
Virtual Surround
Off
Dialog Clarity
Off
Equalizer
This function provides a virtual 5.1 channel surround sound experience through a pair of speakers using HRTF(Head Related
Transfer Function) technology.
•• Off / On
Dialog Clarity
This function allows you to increase the intensity of a voice over background music or sound effects so that dialog can be
heard more clearly.
-- The displayed image may differ depending on the model.
•• Off / On
Equalizer
Use Equalizer to customize sound setting for each speaker.
•• 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies.
•• Reset: Resets the equalizer to its default settings.
HDMI Sound
Select whether to hear from AV(HDMI) or PC(DVI).
•• AV(HDMI) / PC(DVI)
MENU m → Sound → HDMI Sound → ENTER E
Sound
HDMI Sound
AV(HDMI)
-- The displayed image may differ depending on the model.
Sound on Video Call
MENU m → Sound → Sound on Video Call → ENTER E
Sound
Sound on Video Call
Current Source
-- The displayed image may differ depending on the model.
Select sound output to listen to during a video call.
•• Current Source / Video Call
Speaker Settings
TV Sound Output
MENU m → Sound → Speaker Settings → ENTER E
If you are listening to the sound track of a broadcast or movie through an external receiver, you may hear a sound echo caused
by the difference in decoding speed between the products speakers and the speakers attached to your audio receiver. If this
occurs, set the product to External.
•• External / Internal / Receiver
――When you set Speaker Settings to External, the products speakers are turned off.
Sound
You will hear sound through the external speakers only. When the Speaker Settings is set to Internal, both the product
speakers and the external speakers are on. You will hear sound through both.
Speaker Settings
――If there is no video signal, both the products speakers and the external speakers will be mute.
-- The displayed image may differ depending on the model.
Auto Volume
The volume can vary depending on the channel.
Automatically equalize the volume level when switching to another channel.
•• Off / Normal / Night
MENU m → Sound → Auto Volume → ENTER E
Normal equalizes the volume level on each channel, so that when you change channels, the volume level is the same.
Night equalizes and decrease the volume level on each channel, so each channel is quieter. Night is useful at night, when you
may want to keep the volume low.
――To use the volume control of a connected source device, set Auto Volume to Off. A change to the volume control of the
Sound
Auto Volume
-- The displayed image may differ depending on the model.
Off
connected source device may not be applied if Auto Volume is set to Normal or Night.
Reset Sound
MENU m → Sound → Reset Sound → ENTER E
Sound
Reset Sound
-- The displayed image may differ depending on the model.
The displayed image may differ depending on the model. Reset all sound settings to the factory defaults.
Channel
Configure the Channel settings for the product.
Available in TV mode only.
Auto Program
This feature automatically searches and saves all received channels.
•• Auto Program takes about 6–7 minutes.
MENU m → Channel → Auto Program → ENTER E
Channel
Auto Program
Antenna
Air
Channel List
Edit Channel
Audio Options
-- The displayed image may differ depending on the model.
-- Available in TV mode only.
Go to the Auto Program menu.
2
Press the Start button.
3
Select a broadcast signal to search.
4
Press the E button to start Auto Program.
5
When channel configuration is complete, select Close.
Cancelling Auto Program
Edit Favorites
Program Rating Lock
1
On
1
Press the Stop button.
2
A Stop Auto Program? message appears.
3
Press the Yes button.
Antenna
Before your television can begin memorizing the available channels, you must specify the type of signal source that is
connected to the LED display.
•• Air / Cable
MENU m → Channel → Antenna → ENTER E
Channel
Antenna
-- The displayed image may differ depending on the model.
-- Available in TV mode only.
Air
Channel List
MENU m → Channel → Channel List → ENTER E
Channel
Register or delete channels. Add favorite channels or rename analog channels.
Select a desired channel from Channel List to view the channel instantly.
――To navigate Channel List faster, press the channel buttons. The channel list changes page by page.
Added Ch.
Shows all added channels.
Channel List
Favorites 1 ~ Favorites 5
Shows all favorite channels, in up to five groups. Each group has a separate screen.
――The TV displays favorite groups only if you have added favorites using Edit Favorites.
-- The displayed image may differ depending on the model.
-- Available in TV mode only.
Options
•• Antenna
Select either Air or Cable as digital channel mode.
•• Category
Saved channels are classified under the Added Ch., Recently Viewed and Mostly Viewed categories. Select a desired
category.
-- Recently Viewed: View the most recently viewed channels.
-- Mostly Viewed: View the most frequently viewed channels.
•• Edit Favorites
Edit favorite channel lists from Edit Channel.
Icons found in the channel list page
••
••
••
A : Analog channel
*: A channel that is selected
\ : Locked channels
Edit Channel
Manage channels saved on your TV. Delete channels, re-register deleted channels or rename analog channels.
Icons found in the edit channel page
MENU m → Channel → Edit Channel → ENTER E
Channel
Edit Channel
••
••
••
A : Analog channel
*: A channel that is selected
\ : Locked channels
Deleting/registering channels
Deleting channels
Delete channels, if required. Note that deleting channels from the Recently Viewed or Mostly Viewed category does not
remove the channels permanently. The channels are only removed from the categories.
-- The displayed image may differ depending on the model.
1
Select channels to delete from the screen. To cancel, select again. To select all channels, select Options from the screen
and then select Select All from the sub-menu items.
-- Available in TV mode only.
――Alternatively, press and hold the E button on the remote control for about three seconds to run Select All / Deselect All.
2
After selecting channels, select Delete from the screen to delete the channels.
Re-registering deleted channels
Register deleted channels again, if required. Deleted channels are grayed out and can only be found in the list of all channels.
The register function is enabled for deleted channels only.
1
Select Options from the screen. Sub-menu items are displayed. Select Category from the sub-menu items and then
select All.
2
From the list of all channels, select deleted channels you want to register again. To cancel, select again. To select all
channels, select Options from the screen and then select Select All from the sub-menu items.
――Alternatively, press and hold the E button on the remote control for about three seconds to run Select All / Deselect All.
3
After selecting channels, select Add from the screen to re-register the channels.
Editing registered channels
Locking/unlocking channels using a password
Select Options from the edit channel page. The following functions are provided in the page. Provided
functions may vary depending on the broadcast signal.
Lock specific channels to prevent children from accessing inappropriate content.
――To set a password, make sure Program Rating Lock is set to On.
Option Name
Operations
Locking channels
1
Select All
Select all channels in the Edit Channel page.
Deselect All
Deselect all channels.
Antenna
Select either Air or Cable as digital channel mode.
2
Category
Channels saved on your TV are classified under the All, Added Ch., Recently
Viewed and Mostly Viewed categories. Select a desired category.
Unlocking channels
Edit Favorites
Set frequently viewed channels as favorite channels.
Rename Channel
Change the names of analog channels to suit your preferences. A channel
name can be up to five characters long.
Information
View information about the current broadcast program on the air.
Select a channel from the Edit Channel page, and then select Program Rating Lock from the
screen. The password input window is displayed.
1
Enter the password. The selected channel is locked.
Select a locked channel from the Edit Channel page, and then select Program Rating Lock Off
from the screen. The password input window is displayed.
2
Enter the password. The selected channel is unlocked.
Edit Favorites
MENU m → Channel → Edit Favorites → ENTER E
Channel
Creating a favorite channel list
Set frequently viewed channels as favorite channels. Favorite channels are indicated by a symbol in the Edit Channel or
Channel List page. A maximum of five favorite channel lists are allowed. Create different favorite channel lists for each family
member.
Adding the current channel to a favorite channel list
Add the channel you are currently watching to a favorite channel list.
Edit Favorites
1
Press the TOOLS button while watching TV. Sub-menu items are displayed. Select Edit Favorites from the sub-menu
items.
-- The displayed image may differ depending on the model.
-- Available in TV mode only.
2
From the displayed prompt box, select a favorite channel list to save the current channel to. Select OK.
3
The current channel is added in the selected favorite channel list. Select OK.
Adding multiple channels to a favorite channel list
Add multiple channels to a favorite channel list, if required.
1
Select Edit Favorites from Channel List.
2
Select Category from the screen to change the channel list in the center of the screen to the channel list that contains
the channels to add. Each time Category is selected, the category switches in the order Added Ch., Mostly Viewed and
Recently Viewed.
――Recently Viewed and Mostly Viewed are only enabled if they contain saved channels.
3
Select desired channels from the channel list in the center of the screen.
4
Select Change Fav. from the screen to change the favorite channel list on the right to another desired favorite channel
list.
5
Select Add from the screen. The selected channels will create a favorite channel list.
Viewing channels saved under a favorite channel list
Deleting channels from a favorite channel list
――Favorite channel lists are only displayed if they have been created previously.
Delete channels from a favorite channel list, if required.
When changing the channel using the channel buttons, channels saved in favorite channel lists can only
be accessed.
1
1
Select Channel List from the Channel menu. The channel list is displayed.
2
Select a favorite channel list among Favorites 1 – Favorites 5.
3
Select channels from the selected favorite channel list.
――Selecting Channel List while watching a favorite channel will display the updated favorite
channel list.
desired favorite channel list.
2
Select channels to delete from the selected favorite channel list.
3
Select Delete from the screen. The selected channels are deleted from the favorite channel list.
Changing the order of channels in a favorite channel list
Change the order of channels saved in a favorite channel list, if required.
Editing favorite channel lists
1
Copy to Favorites
Operations
Copy channels from a favorite channel list to another favorite channel list.
――This option is only available when channels under a favorite channel list
are selected.
Rename Favorites
Change the name of a favorite channel list.
――This option is only available when channels under a favorite channel list
are selected.
Antenna
Select either the Air or Cable signal.
Edit Channel
Manage saved channels.
Information
View information about the current broadcast program on the air.
Select Change Fav. from the screen to change the favorite channel list on the right to another
desired favorite channel list.
Select Options from the edit favorite channel list page. The following sub-menu items are displayed.
Option Name
Select Change Fav. from the screen to change the favorite channel list on the right to another
2
Select channels to rearrange from the selected favorite channel list.
3
Select Change order from the screen, and then change the order of the selected channels. To apply
the new order of the channels, press the E button.
Renaming a favorite channel list
Change the name of a favorite channel list, if required.
1
Select Change Fav. from the screen to change the favorite channel list on the right to another desired favorite channel list.
2
Select Options from the screen. Sub-menu items are displayed.
3
Select Rename Favorites from the sub-menu items. A prompt box appears.
4
Change the favorite channel list using the prompt box. The name for a favorite channel list can be up to 20 characters long.
Copying channels between favorite channel lists
Copy channels from a favorite channel list to another favorite channel list, if required.
1
Select Change Fav. from the screen to change the favorite channel list on the right to another desired favorite channel list.
2
Select channels to copy from the favorite channel list on the right.
3
Select Options from the screen. Sub-menu items are displayed.
4
Select Copy to Favorites from the sub-menu items. A prompt box appears.
5
Select favorite channel lists to copy the channels to using the prompt box. The channels are saved to the selected favorite channel lists.
――To use Copy to Favorites, make sure channels are saved in a favorite channel list.
Audio Options
Preferred Language
(for digital broadcasts)
MENU m → Channel → Audio Options → ENTER E
Digital-TV broadcasts can simultaneously transmit many audio tracks (for example, simultaneous translations of the program
into foreign languages).
――You can only select a language from among the ones being broadcasted.
Channel
Preferred Language
Multi-Track Sound
Use the up and down arrow keys to select a language, and then press E.
English
Stereo
Multi-Track Sound
Select an option using the up and down arrow keys, and the press E.
•• Mono: Choose for channels that are Broadcasting in mono or if you are having difficulty receiving a stereo signal.
•• Stereo: Choose for channels that are Broadcasting in stereo.
-- The displayed image may differ depending on the model.
-- Available in TV mode only.
•• SAP: Choose to listen to the Separate Audio Program, which is usually a foreign-language translation.
――Depending on the program being broadcast, you can listen to Mono, Stereo, or SAP.
Program Rating Lock
When turned on, the Program Rating Lock feature can automatically block programs that you deem inappropriate for your
children. You must enter a PIN (personal identification number) before you can set or change any of the Program Rating Lock
restrictions.
MENU m → Channel → Program Rating Lock → ENTER E
•• Off / On
――This option is available when the input source is TV.
――The default PIN number for a new product set is “0-0-0-0”.
Program Rating Lock
Program Rating Lock
· TV Rating
· Movie Rating (MPAA)
· Canadian English Rating
· Canadian French Rating
· Downloadable U.S. Rating
On
•• TV Rating: You can block TV programs based on their ratings. This function allows you to control what your children can
watch. TV Rating displays a grid with locks. The following categories are on the left side. TV-Y: Young children / TV-Y7:
Children 7 and over / TV-G: General audience / TV-PG: Parental guidance / TV-14: Viewers 14 and over / TV-MA: Mature
audience
All: Lock all TV ratings. / FV: Fantasy violence / V: Violence / S: Sexual situation / L: Adult Language / D: Sexually
Suggestive Dialog
――To block certain content, you select a lock, and press E (That is, you “click it”.). For example, click the lock at the
intersection of V and TV-MA, and you block all programs that are rated violent and for mature adults. The locks are
also assigned to related groups. For example, if you click TV-Y under All, then TV-Y7 will also automatically be blocked.
Similarly, if you click TV-G under All, then all the categories in the young adult group will be blocked (TV-G, TV-PG,
TV-14 and TV-MA). The sub-ratings (D, L, S, V) work similarly. So, if you block the L sub-rating in TV-PG, then the L subratings in TV-14 and TV-MA will automatically be blocked.
――To unblock a category, click the lock. To unblock all the categories in a row, click the lock under All.
――To watch a blocked program, you must enter the Security code when requested.
-- The displayed image may differ depending on the model.
-- Available in TV mode only.
•• Movie Rating (MPAA): You can block movies based on their MPAA rating. The Motion Picture Association of America
(MPAA) has implemented a rating system that provides parents or guardians with advanced information on which films
are appropriate for children.
Movie Rating (MPAA) displays a column with locks and the following ratings categories.
G: General audience (no restrictions). / PG: Parental guidance suggested. / PG-13: Parents strongly cautioned. / R:
Restricted. Children under 17 should be accompanied by an adult. / NC-17: No children under age 17. / X: Adults only. /
NR: Not rated.
――To block certain content, you select a lock, and press E (That is, you “click it”.). For example, click the X lock and you block
all X-rated movies. The rating categories are also grouped so that clicking one category blocks all the categories a
parent would block along with it. For example, if you block the PG-13 category, then R, NC-17 and X will automatically
be blocked also.
•• Canadian English Rating: You can block TV programs based on their Anglophone Canadian rating.
Canadian English Rating displays a column with locks and the following ratings categories.
C: Programming intended for children under age 8. / C8+: Programming generally considered acceptable for children 8 years and over to watch on their own. / G:
General programming, suitable for all audiences. / PG: Parental Guidance. / 14+: Programming contains themes or content which may not be suitable for viewers
under the age of 14. / 18+: Adult programming.
――To block certain content, you select a lock, and press E (That is, you “click it”.). For example, click the 18+ lock and you block all TV programs rated 18+. The rating
categories are also grouped so that clicking one category blocks all the categories a parent would block along with it. For example, if you block the G category,
then PG, 14+ and 18+ will automatically be blocked.
――To unblock a category, click the lock.
•• Canadian French Rating: You can block TV programs based on their French Canadian rating. Canadian French Rating displays a column with locks and the
following ratings categories. G: General / 8 ans+: Programming generally considered acceptable for children 8 years and over to watch on their own. /13 ans+:
Programming may not be suitable for children under the age of 13. / 16 ans+: Programming is not suitable for children under the age of 16. / 18 ans+: Programming
restricted to adults.
――To block certain content, you select a lock, and press E (That is, you “click it”.). For example, click the 18 ans+ lock and you block all TV programs rated 18 ans+.
The rating categories are also grouped so that clicking one category blocks all the categories a parent would block along with it. For example, if you block the 18
ans+ category, then 13 ans+, 16 ans+ and 18 ans+ will automatically be blocked also.
――To unblock a category, click the lock.
•• Downloadable U.S. Rating: Parental restriction information you can use while watching DTV channels.
――If information is not downloaded from the Broadcasting station, Downloadable U.S. Rating menu is deactivated.
――Parental restriction information is automatically downloaded while you watch DTV channels. It may take several seconds.
――The Downloadable U.S. Rating menu is available for use after information is downloaded from the Broadcasting station. However, depending on the information
from the Broadcasting station, it may not be available for use.
――Parental restriction levels differ depending on the Broadcasting station. The default menu name and Downloadable U.S. Rating change depending on the
downloaded information.
――Even if you set the on-screen display to another language, the Downloadable U.S. Rating menu will appear in English only.
――Blocking one rating level will automatically block other categories that deal with more sensitive material.
――The rating titles (For example: Humor Level..etc) and TV ratings (For example: DH, MH, H..etc) may differ depending on the Broadcasting station.
Channel Settings
Fine Tune
(analog channels only)
MENU m → Channel → Channel Settings → ENTER E
Channel
Channel Settings
If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store
operation. If the signal is weak or distorted, fine tune the channel manually. Scroll to the left or right until the image is clear.
――This function is only available in Cable mode.
――Settings are applied to the channel you’re currently watching.
――Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in
the channel banner.
――To reset the fine-tuning, select Reset.
Clear Scrambled Channel
-- The displayed image may differ depending on the model.
-- Available in TV mode only.
(digital channels only)
This function filters out scrambled channels after Auto Program is completed. This process may take up to 20~30 minutes.
How to Stop the Clear Scrambled Channel function
1
Press the E button to select Stop.
2
Press the u button to select Yes.
3
Press the E button.
――This function is only available in Cable mode.
Network
Network Status
Network Settings
MENU m → Network → Network Status → ENTER E
MENU m → Network → Network Settings → ENTER E
You can check the current network and Internet status.
Configure network settings to use various smart hub features such as Internet search, content sharing
through a home network and feature updates.
Network Status
Your wireless network and Internet connection are setup and ready to use.
Network Settings
Select your network type.
Network Type
Wireless
Wireless network
You are connected to the Internet. If you have any problems using online services, please
contact your Internet Service Provider.
Disconnect
IP Settings
Retry
You can connect your
Device to the internet.
Please select which wireless
network to use.
Close
Refresh
WPS(PBC)
-- The displayed image may differ depending on the model.
-- The displayed image may differ depending on the model.
Network Type
•• Wireless / Wired
Network Settings (Wired)
•• Depending on how your network is configured, you may be able to attach your product to your
LAN by connecting the LAN port on the back of your product directly to a network wall outlet
using a LAN cable.
See the diagram below. Note that the wall outlet is attached to a modem or router elsewhere in
your house.
Connecting to a Wired Network
There are three ways to attach your product to your LAN using cable.
•• You can attach your product to your LAN by connecting the LAN port on the back of your product
to an external modem using a LAN cable.
See the diagram below.
LAN
The LAN Port on the Wall
RJ45
LAN
The Modem Port on the Wall
External Modem
(ADSL / VDSL / cable TV)
Modem Cable
RJ45
If you have a Dynamic Network, you should use an ADSL modem or router that supports the Dynamic
Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide the
IP address, subnet mask, gateway, and DNS values your product needs to access the Internet so you do
not have to enter them manually. Most home networks are Dynamic Networks.
LAN Cable
•• You can attach your product to your LAN by connecting the LAN port on the back of your product
to an IP Sharer which is connected to an external modem. Use LAN cable for the connection. See
the diagram below.
LAN
The Modem Port on the Wall
External Modem
(ADSL / VDSL / cable TV)
Modem Cable
IP Sharer
(having DHCP server)
LAN Cable
LAN Cable
LAN Cable
RJ45
Some networks require a Static IP address. If your network requires a Static IP address, you must enter
the IP address, subnet mask, gateway, and DNS values manually on your product Cable Setup Screen
when you set up the network connection. To get the IP address, subnet mask, gateway, and DNS values,
contact your Internet Service Provider (ISP).
If you have a Windows computer, you can also get these values through your computer.
――You can use ADSL modems that support DHCP if your network requires a Static IP address.
――ADSL modems that support DHCP also let you use Static IP addresses.
Set the network connection to use Internet services such as perform software upgrades.
2
In the pop-up menu that appears, click Status.
Automatic Network Settings (Wired)
3
On the dialog that appears, click the Support tab.
4
On the Support Tab, click the Details button. The Network connection values are displayed.
Connect to the network using a LAN cable.
Make sure a LAN cable is connected first.
How to set up automatically
How to set up manually
1
Set Network Type to Wired from the Network Settings page.
1
Set Network Type to Wired from the Network Settings page.
2
Press the Connect button to start Network Settings.
2
Press the Connect button to start Network Settings.
-- The Connect button is only enabled when the LAN cable is properly connected.
3
The network test screen appears and verifies the network connection.
When the connection has been verified, the “Wired network and Internet connection
completed.” message appears.
――If the connection process fails, check the LAN port connection.
――If the automatic process cannot find the network connection values or if you want to set the
connection manually, go to the next section, network setup.
-- The Connect button is only enabled when the LAN cable is properly connected.
3
The network test screen appears and the verification process starts. Press Stop. The verification
process stops.
4
Select IP Settings on network connection screen. The IP Settings screen appears.
5
Select the field at the top, press E, and then set IP Settings to Enter manually. Repeat the entry
process for each field in the IP Address.
Manual Network Settings (Wired)
Offices may use static IP addresses.
If this is the case, ask the network administrator for the IP address, subnet mask, gateway and DNS server
address. Enter these values manually.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these steps.
1
Right click the Network icon on the bottom right of the screen.
――Setting IP Settings to Enter manually automatically changes DNS Setting to Enter manually.
6
When done, select OK at the bottom of the page, and then press E. The network test screen
appears and the verification process starts.
7
When the connection has been verified, the “Wired network and Internet connection
completed.” message appears.
Network Setting (Wireless)
Connecting to a Wireless Network
Wireless IP sharer
(router having DHCP server)
The LAN Port on the Wall
LAN Cable
Samsung recommends using IEEE 802.11n. When you play video over a network connection, the video
may not play smoothly.
――Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the
wireless IP sharer is currently being used by another device nearby, this will result in interference and
communication failure.
Automatic Network Setup (Wireless)
Most wireless networks have an optional security system that requires devices that access the network
to transmit an encrypted security code called an Access or Security key. The Security key is based on
a Pass Phrase, typically a word or a series of letters and numbers of a specified length you were asked
to enter when you set up security for your wireless network. If you use this method of setting up the
network connection, and have a Security key for your wireless network, you will have to enter the Pass
Phrase during the the automatic or manual setup process.
How to set up automatically
1
Set Network Type to Wireless from the Network Settings page.
2
The Network function searches for available wireless networks. When done, it displays a list of the
available networks.
3
twice.
――Your product supports only the following wireless network security protocols.
――If the desired wireless router does not appear, select Refresh to search again.
If you select the Pure High-throughput (Greenfield) 802.11n mode and the Encryption type is set to
WEP, TKIP or TKIP AES (WPS2Mixed) on your AP or wireless router, Samsung products will not support
a connection in compliance with new Wi-Fi certification specifications.
――If your wireless router supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC
(Push Button Configuration) or PIN (Personal Identification Number). WPS will automatically configure
the SSID and WPA key in either mode.
――If the router cannot be found after retrying, select the Stop button.
The Add Network button appears.
Select Add Network to add a wireless router to connect to.
4
If the Enter password. screen appears, go to step 5. If you select a wireless router that does not
have security, go to step 7.
――Connection Methods: You can setup the wireless network connection in three ways.
Auto Setup (Using the Auto Network Search function), Manual Setup, WPS(PBC)
In the list of networks, press the ▲ or ▼ button to select a network, and then press the E button
5
If the router has security, enter the Enter password. (Security key or PIN).
6
When done, use the right arrow button to move the cursor to Done, and then press E. The
How to set up manually
network connection screen appears and the verification process starts.
1
Set Network Type to Wireless from the Network Settings page.
2
The Network function searches for available wireless networks. When done, it displays a list of the
――A connection with the router is established, but the Internet cannot be accessed.
7
When the connection has been verified, the “Your wireless network and Internet connection
available networks.
are setup and ready to use.” message appears.
3
Manual Network Setup (Wireless)
In the list of networks, press the u or d button to select a network, and then press the E button
twice.
Offices may use static IP addresses.
――If the desired wireless router does not appear, select Refresh to search again.
If this is the case, ask the network administrator for the IP address, subnet mask, gateway and DNS server
address. Enter these values manually.
――If the router cannot be found after retrying, select the Stop button.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these steps.
1
Right click the Network icon on the bottom right of the screen.
2
In the pop-up menu that appears, click Status.
3
On the dialog that appears, click the Support tab.
4
On the Support Tab, click the Details button. The Network connection values are displayed.
The Add Network button appears.
Select Add Network to add a wireless router to connect to.
4
If the Enter password. screen appears, go to step 5. If you select a wireless router that does not
have security, go to step 7.
5
If the router has security, enter the Enter password. (Security key or PIN).
6
When done, use the right arrow button to move the cursor to Done, and then press E. The
network connection screen appears and the verification process starts.
7
Select Stop while network connections are being attempted. This will stop the connection.
8
Select IP Settings on network connection screen. The IP Settings screen appears.
9
Select the field at the top, press E, and then set IP Settings to Enter manually. Repeat the entry
process for each field in the IP Address.
――Setting IP Settings to Enter manually automatically changes DNS Setting to Enter manually.
10When done, select OK at the bottom of the page, and then press E. The network test screen
appears and the verification process starts.
11When the connection has been verified, the “Your wireless network and Internet connection
are setup and ready to use.” message appears.
WPS(PBC)
How to set up using WPS(PBC)
If your router has a WPS(PBC) button, follow these steps.
1
Set Network Type to Wireless from the Network Settings page.
2
Select WPS(PBC), press E, and then press E again.
3
Press the WPS(PBC) button on your router within 2 minutes. Your product automatically acquires
all the network setting values it needs and connects to your network.
4
The network connection screen appears, and network setup is done.
Wi-Fi Direct
MENU m → Network → Wi-Fi Direct → ENTER E
Set to connect the product to wireless mobile devices. Using this function, you can connect wireless mobile devices with your product directly without a router.
To use this function, your mobile device
should be supported by the Wi-Fi Direct.
To connect your mobile device with your product using Wi-Fi Direct, follow these steps:
1
Go to Wi-Fi Direct screen. The product starts to search devices.
2
Turn on the Wi-Fi Direct function on your device. Select the desired Wi-Fi device.
•• PBC (Push Button Configuration): Press the WPS(PBC) button on your Wi-Fi device within 2 minutes. Your product automatically acquires all the network setting
values it needs and connects to your network.
•• PIN: Input the displayed PIN on your device.
――If you want to disconnect the device, select the connected Wi-Fi device, and then select Disconnected.
Multimedia Device Settings
MENU m → Network → Multimedia Device Settings → ENTER E
Allow other devices such as smart phones and tablets on your network, to share content with your product.
Screen Mirroring
Server Network Settings
MENU m → Network → Screen Mirroring → ENTER E
MENU m → Network → Server Network Settings → ENTER E
Connect a mobile device that supports the mirroring function to the product. This allows the screen and
sound from the mobile device to be outputted on the product. Mirroring refers to outputting the screen
and sound from a mobile device on a display device.
――To use Screen Mirroring, make sure the mobile device supports the mirroring function such as
AllShare Cast, WiDi (version 3.5 or higher) and Miracast. To check if the mirroring function is available,
visit the mobile device manufacturer website.
――Screen or sound output may be choppy if there is network congestion.
Screen Mirroring
Run the mirroring function from the mobile device. The mobile device automatically searches and
displays the product in a list.
――If the mobile device cannot connect to the product, turn them off and then on again, and try again.
Connect to Server
To run Player connect to a network.
•• If the SSL option is enabled, the server is configured to use https and data transfer is encrypted.
――Enter the server IP address and port number. Use 7001 as the port number. (If unable to connect to
the server using port number 7001, check with your server administrator to find the correct port
number and then change the port number.)
MagicInfo Mode
Select the appropriate MagicInfo Mode depending on the environment where you are using the
product.
•• Lite / Premium
Server Access
Select a method to connect the server network.
•• Allow / Deny
FTP Mode
Specify the FTP operating mode.
•• Active / Passive
Device Name
MENU m → Network → Device Name → ENTER E
Select or enter a device name.
This name can be shown on network remote controls over the network.
System
Setup
Initial settings (Setup)
MENU m → System → Setup → ENTER E
After powering on the product for the first time, configure basic settings such as the language, channel and time.
button.
Press the
――Initial Setup automatically changes Source to TV.
System
1
Press the u or d button, and then press the E button. Specify the OSD menu language.
Setup
2
Time
Rotate Menu
Configure the menu page orientation.
Auto Source Switching
-- Landscape / Portrait
3
Power Control
Network Settings
Set up your network connection. Press the E button to start. If you do not know your network set up information or
want to set to it later, select Skip. You can set up the network connection later using the Network menu.
Eco Solution
Temperature Control
Selecting a language
77
4
Device Manager
Configure your TV
Select the broadcast signal connected to the product.
-- Antenna / No TV (display only)
5
-- The displayed image may differ depending on the model.
Auto Program
This feature automatically searches and configures broadcast signals connected to the product.
To configure settings later, press the Stop button.
6
Clock Set
Set the current date and time, and then select Next.
7
Play via
Select the appropriate player mode depending on the environment where you are using the product.
――The Play via setting step only appears when connected to the network.
8
Setup Complete
Congratulations! Setup is complete and you're ready to get started.
To watch TV using the product now, select OK.
Time
You can configure Clock Set or Sleep Timer. You can also set the product to automatically turn on or off at a specified time
using the Timer function.
MENU m → System → Time → ENTER E
Clock
Set the current year, date and time.
――Press the INFO button if you want to view the current time.
Time
Clock
Clock Mode
DST
Off
Set the current time manually or automatically.
Sleep Timer
Off
Auto: Have the product set the current time automatically using the time from a digital channel.
――You must have the cable or an antenna connected to the product to set the time automatically.
Power On Delay
0 sec
Manual: Set the current time manually.
Clock Set
-- The displayed image may differ depending on the model.
Select Clock Set. Select Date or Time, and then press E.
Use the number buttons to enter numbers or press the up and down arrow buttons. Use the left and right arrow buttons to
move from one entry field to the next. Press E when done.
――Available only when Clock Mode is set to Manual.
――You can set the Date and Time directly by pressing the number buttons on the remote control.
Time Zone
Select your time zone.
――This function is only available when the Clock Mode is set to Auto.
Time Offset
If the current time that has been automatically set is different from the actual time, adjust the hour between the interval -12
hours and +12 hours.
――Time Offset is only available when Clock Mode is set to Auto and when the network is connected.
――When the current time information cannot be received through the signal from a broadcaster, the current time is set
through the network (e.g., when watching TV through a cable broadcast receiver or satellite receiver).
DST
Time
Switches the DST (Daylight Saving Time) function on or off.
Clock
Off / Auto / Manual
DST
Off
Sleep Timer
Off
Power On Delay
0 sec
•• Start Date: Set the start date of Daylight Saving Time.
•• End Date: Set the end date of Daylight Saving Time.
•• Time Offset: Select the correct time offset your timezone.
Sleep Timer
Automatically shuts off the product after a preset period of time.
-- The displayed image may differ depending on the model.
(Off / 30 min. / 60 min. / 90 min. / 120 min. / 150 min. / 180 min.)
――Use the up and down arrows to select a period of time, and then press E. To cancel Sleep Timer, select Off.
Power On Delay
When connecting multiple products, adjust the power-on time for each product to prevent power overload (within the range
0–50 seconds).
Auto Source Switching
Turning on the display with Auto Source Switching On, and the previous video source selection is not active, the display will
automatically search the different video input sources for active video.
MENU m → System → Auto Source Switching → ENTER E
Auto Source Switching
When the Auto Source Switching is On, the display video source will automatically be searched for active video.
Auto Source Switching
The Primary Source selection will be activated, if the current video source is not recognized.
Auto Source Switching
Primary Source Recovery
Off
Off
끄기
Primary Source
All
Secondary Source
TV
Secondary Source selection will become active, if no primary video source is available.
If both the primary and secondary input sources are not recognized, the display will perform two searches for an active source,
each search checking the primary and then secondary source. If both searches fail, the display will return to the first video
source and display a message indicating that there is no signal.
When the Primary Source selection is set to All, the display will search all the video source inputs twice in sequence looking
for an active video source, returning back to the first video source in the sequence if no video is found.
Primary Source Recovery
-- The displayed image may differ depending on the model.
Select whether to restore the selected primary input source when a primary input source is connected.
――The Primary Source Recovery function is disabled if Primary Source is set to All.
Primary Source
Specify Primary Source for the automatic input source.
Secondary Source
Specify Secondary Source for the automatic input source.
Power Control
Auto Power On
This feature automatically turns on the product as soon as it is plugged in. Pressing the power button is not needed.
MENU m → System → Power Control → ENTER E
PC Module Power
Power Control
Auto Power On
Off
Max. Power Saving
Power Button
The PC module can be turned on/off separately from the LFD.
Synced Power-On
PC Module Power
Standby Control
•• Off / On
On
Auto
Power On Only
Network Standby
-- The displayed image may differ depending on the model.
Off
To turn on the PC module without turning on the LFD, select Off.
•• Off / On
Synced Power-Off
To turn off the LFD without turning off the PC module, select Off.
•• Off / On
Max. Power Saving
Turns off the product to reduce power consumption after the PC has been left idle for a specified period of time.
•• Off / On
――Available only PC, DVI, HDMI1, HDMI2, HDMI3, DisplayPort mode.
Standby Control
Power Control
Auto Power On
Off
PC Module Power
Power Button
•• Auto
Power-saving mode will activate if no input signals are detected even though a source device is connected to the display.
The message No Signal will appear if no source device is connected.
Max. Power Saving
Standby Control
You can set the screen standby mode to be applied when an input signal is received.
On
Auto
Power On Only
Network Standby
Off
•• Off
The message No Signal will appear if no input signals are detected.
――The Standby Control option is only enabled when Source is set to PC, DVI, HDMI1, HDMI2, HDMI3 or DisplayPort.
――If No Signal is displayed although a source device is connected, check the cable connection.
――If No Signal Message is set to Off, the No Signal message does not appear.
If this is the case, set No Signal Message to On.
•• On
Power-saving mode will activate if no input signals are detected.
-- The displayed image may differ depending on the model.
Power Button
The power button can be set to either turn on the power or turn on/off the power.
•• Power On Only: Set the power button to turn on the power.
•• Power On/Off: Set the power button to turn on/off the power.
Network Standby
This feature keeps the network power on when the product turns off.
•• Off / On
Eco Solution
Energy Saving
Reduce the power consumption by adjusting the screen brightness.
MENU m → System → Eco Solution → ENTER E
•• Off / Low / Medium / High
Eco Sensor
Eco Solution
To enhance your power savings, the picture settings will automatically adapt to the light in the room.
Energy Saving
Off
Eco Sensor
Off
Screen Lamp Schedule
Off
Min. Backlight
No Signal Power Off
Off
Auto Power Off
Off
When Eco Sensor is On, you can manually adjust the minimum screen brightness. Min. Backlight is the darkest backlight
mode. Make sure the Min. Backlight setting is lower than the Backlight setting.
――If Eco Sensor is On, the display brightness may change (become slightly darker or brighter) depending on the surrounding
•• Off / On
――Adjusting the Backlight setting under Picture while Eco Sensor is on will disable the Off.
light intensity.
-- The displayed image may differ depending on the model.
Screen Lamp Schedule
Adjust the panel brightness. A value closer to 100 makes the panel brighter.
•• Off / On
No Signal Power Off
Eco Solution
Save power by turning the device off when no signal is received from any source.
Energy Saving
Off
Eco Sensor
Off
Screen Lamp Schedule
Off
No Signal Power Off
Off
Auto Power Off
Auto Power Off
Off
The product will automatically turn off if you don’t press a button on the remote or touch a button on product front panel
within select hours to prevent overheating.
•• Off / 15 min. / 30 min. / 60 min.
――Disabled when an attached PC is in power saving mode.
――The product will automatically power off at a specified time. The time can be changed as required.
•• Off / 4 hours / 6 hours / 8 hours
-- The displayed image may differ depending on the model.
Temperature Control
This function detects the internal temperature of the product. You can specify the temperature range that is acceptable.
The default temperature is set to 77 C.
MENU m → System → Temperature Control → ENTER E
continues to rise, the product will power off to prevent overheating.
System
Temperature Control
-- The displayed image may differ depending on the model.
The recommended operating temperature for this product is 75 to 80 C (based on an ambient temperature of 40 C).
――The screen will become darker if the current temperature exceeds the specified temperature limit. If the temperature
77
Device Manager
MENU m → System → Device Manager → ENTER E
Device Manager
Keyboard Settings
Mouse Settings
Pointer Settings
Configure options for external input devices connected to the product.
Keyboard Settings
Configure keyboard connection settings or options for a connected keyboard.
Select Keyboard
Select a keyboard you want to use from the available connected keyboards.
――It is possible to use only one connected keyboard.
Keyboard Options
――Depending on the country.
Keyboard Language
-- The displayed image may differ depending on the model.
Specify the keyboard input language.
Keyboard Type
Specify the keyboard type.
Switch Input Language
Configure the key combination used to change the input language.
Device Manager
Mouse Settings
Keyboard Settings
Select Mouse
Mouse Settings
Configure mouse connection settings or options for connected mouse devices.
――Among connected mouse devices, only one mouse can be used.
Pointer Settings
Mouse Options
――Depending on the country.
-- The displayed image may differ depending on the model.
Primary Button
Select a button on the mouse that will perform basic functions (click and enter).
Pointer Speed
Set the mouse pointer speed.
Device Manager
Pointer Settings
Keyboard Settings
Pointer Size
Mouse Settings
Specify the pointer size.
Pointer Settings
•• Small / Medium / Large / Extra large
Pointer Speed
Specify the pointer speed. A higher speed increases the pointer sensitivity.
-- The displayed image may differ depending on the model.
•• Slow / Standard / Fast
Pointer Image
Specify the pointer shape.
•• Image 1 ~ Image 10
Play via
Select the appropriate Play via mode depending on the environment where you are using the product.
The home screen may be different depending on the setting.
MENU m → System → Play via → ENTER E
•• MagicInfo / URL Launcher
System
Play via
MagicInfo
-- The displayed image may differ depending on the model.
Change PIN
MENU m → System → Change PIN → ENTER E
System
Change PIN
-- The displayed image may differ depending on the model.
The Change PIN screen will appear.
Choose any 4 digits for your PIN and enter it in Enter New PIN. Reenter the same 4 digits in Confirm New PIN.
When the Confirm screen disappears, press the Close button. The product has memorized your new PIN.
――Default password: 0 - 0 - 0 - 0
General
Security
MENUm → System → General → ENTERE
Safety Lock
It sets safe lock function.
General
•• Off / On
All the menus and buttons of the product and remote control, except for the LOCK button on the remote control, will be
locked by the Safety Lock function.
Security
BD Wise
On
Anynet+ (HDMI-CEC)
On
HDMI Hot Plug
On
DivX® Video On Demand
Game Mode
To unlock the menus and buttons, press the LOCK button and then enter the password (default password: 0 - 0 - 0 - 0).
Button Lock
This menu can be used to lock the buttons on the product.
Only the remote control can control the product if Button Lock is set to On.
•• Off / On
Off
USB Auto Play Lock
Lock USB memory devices to prevent them from being auto detected.
-- The displayed image may differ depending on the model.
•• Off / On
BD Wise
Provides the optimal picture quality for Samsung DVD, Blu-ray and Home Theater products which support BD Wise. When BD
Wise is turned On, the picture mode is automatically changed to the optimal resolution.
•• Off / On
――Available when you connect Samsung products that support BD Wise through an HDMI cable to the product.
――The BD Wise function is enabled only when a source device with the BD Wise function is connected.
Anynet+ (HDMI-CEC)
General
Anynet+ (HDMI-CEC)
Security
BD Wise
On
Anynet+ (HDMI-CEC)
On
HDMI Hot Plug
On
――The product remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.
――Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.
DivX® Video On Demand
Game Mode
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung
product remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your
Samsung device has this feature, check if there is an Anynet+ logo on it.
――You can only control Anynet+ devices using the product remote control, not the buttons on the product.
Off
――While in PIP mode, Anynet+ functions only when an AV device is connected as the primary display. It does not work if the
AV device is connected as a secondary display.
――Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
Anynet+ Menu
-- The displayed image may differ depending on the model.
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the product.
Anynet+ Menu
Description
View PC
Changes Anynet+ mode to PC mode.
Device List
Shows the Anynet+ device list.
(device_name) Menu
Shows the menu of the connected device menus. E.g. if a DVD player is connected,
the disc menu of the DVD player will appear.
(device_name) Tools
Shows the tools menu of the connected device. E.g. if a DVD player is connected, the
tools menu of the DVD player will appear.
――Depending on the device, this menu may not be available.
(device_name) Title Menu
Shows the title menu of the disc in the connected device. E.g. If a DVD player is
connected, the title menu of the movie in the DVD player will appear.
――Depending on the device, this menu may not be available.
Auto Turn Off
Anynet+ (HDMI-CEC)
Setting an Anynet+ Device to turn Off automatically when the product is turned off.
Anynet+ (HDMI-CEC)
Off
Auto Turn Off
No
Device search
-- The displayed image may differ depending on the model.
•• No / Yes
――If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the product powers off.
――May not be enabled depending on the device.
Device search
Switching between Anynet+ Devices
1
Press the TOOLS button, select Anynet+ (HDMI-CEC), and then press E.
2
Select Device List, and then press the E button.
If you cannot find a device you want, select Refresh to refresh the list.
3
Select a device, and then press the E button. You can switch to the selected device.
――The Device List menu appears only when you set Anynet+ (HDMI-CEC) to On in the System menu.
――Switching to the selected device may take up to 2 minutes. You cannot cancel the switching operation while switching is in
progress.
――If you have selected an Anynet+ device by pressing the SOURCE button and then selecting its input source, you cannot use
the Anynet+ function.
――Make sure to switch to an Anynet+ device by using the Device List.
Troubleshooting for Anynet+
Problem
Anynet+ does not work.
Possible Solution
•• Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.
•• Check if the Anynet+ device power cord is properly connected.
•• Check the Anynet+ device’s Video/Audio/HDMI cable connections.
•• Check whether Anynet+ (HDMI-CEC) is set to On in the System menu.
•• Check whether the remote control is Anynet+ compatible.
•• Anynet+ doesn’t work in certain situations. (initial setup)
•• If you have removed and then reconnected the HDMI cable, please make sure to search devices again or turn your product
off and on again.
•• Check if the Anynet+ function of the Anynet device is set on.
I want to start Anynet+.
•• Check if the Anynet+ device is properly connected to the product and check if the Anynet+ (HDMI-CEC) is set to On in the
System menu.
•• Press the TOOLS button to display the Anynet+ menu and select a menu you want.
I want to exit Anynet+.
•• Select View PC in the Anynet+ menu.
•• Press the SOURCE button on the product remote control and select a non- Anynet+ device.
The message “Disconnecting
Anynet+ device ...” appears on
the screen.
•• You cannot use the remote control when you are configuring Anynet+ or switching to a view mode.
The Anynet+ device does not play.
•• You cannot use the play function when initial setup is in progress.
•• Use the remote control after the product has completed Anynet+ configuration or has finished switching to Anynet+.
Problem
The connected device is not
displayed.
Possible Solution
•• Check whether or not the device supports Anynet+ functions.
•• Check whether or not the HDMI cable is properly connected.
•• Check whether Anynet+ (HDMI-CEC) is set to On in the System menu.
•• Search Anynet+ devices again.
•• Anynet+ requires an HDMI connection. Make sure the device is connected to your product with an HDMI cable.
•• Some HDMI cables may not support Anynet+ functions.
•• If the connection is terminated because there has been a power failure or the HDMI cable has been disconnected, please
repeat the device scan.
HDMI Hot Plug
General
This feature is used to activate the time delay to turn on a DVI/HDMI source device.
Security
•• Off / On
BD Wise
On
Anynet+ (HDMI-CEC)
On
HDMI Hot Plug
On
Shows the registration code authorized for the product.
If you connect to the DivXⓇ web site and register using that code, you can download the VOD registration file.
For more information about DivXⓇ VOD, visit “http://vod.divx.com”.
DivX® Video On Demand
Game Mode
DivX® Video On Demand
Off
Game Mode
When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by
selecting game mode.
-- The displayed image may differ depending on the model.
•• Off / On
――Precautions and limitations for Game Mode
To disconnect the game console and connect another external device, set Game Mode to Off in the setup menu.
――Game Mode is not available when the input source is set to TV, DVI or DisplayPort.
Reset System
MENU m → System → Reset System → ENTER E
System
Reset System
-- The displayed image may differ depending on the model.
This option returns the current settings under system to the default factory settings.
Support
Software Update
MENU m → Support → Software Update → ENTER E
The Software Update menu lets you upgrade your product software to the latest version.
――Be careful not to turn off the power until the upgrade is complete. The product will turn off and on automatically after completing the software upgrade.
――When you upgrade software, all video and audio settings you have made will return to their default settings. We advise you to write down your settings so that you can
easily reset them after the upgrade.
-- Current Version: This is the software
version already installed in the product.
Update now
Update the software to the latest version.
Auto Update
This feature automatically updates the product when not in use.
•• Off / On
Contact Samsung
MENU m → Support → Contact Samsung → ENTER E
View this information when your product does not work properly or when you want to upgrade the software.
You can find information regarding our call centers and how to download products and software.
――Contact Samsung and find the product Model Code and Software Version.
Go to Home
Accessible using the HOME
Go to Home to play a variety of content from a memory device or a connected network.
Player
button on the remote control.
Search or play channels or content saved on devices.
MENU m → Support → Go to Home → ENTER E
Schedule
Create content schedules in local channels or edit saved channels.
Player
Schedule
Template
Play a variety of content, such as
scheduled channels, templates or files.
Template
To create content, select a template.
Clone Product
ID Settings
Video Wall
Network Status
Picture Mode
On/Off Timer
Ticker
More settings
Clone Product
Export the product settings to a USB device or load the settings via a USB device.
This option is useful when assigning the same settings to several products.
-- The displayed image may differ depending on the model.
-- Refer to the "Home feature" chapter for details on sub-menu items.
ID Settings
Assign an ID to a set.
Press u/d to select a number, and press E.
Video Wall
Customize the layout of multiple displays that are connected to form a video wall.
In addition, display part of a whole picture or repeat the same picture on each of the connected multiple displays.
To display multiple images, refer to MDC Help or the MagicInfo user guide. Some models may not support the MagicInfo function.
Network Status
Check the current network and Internet connection.
Picture Mode
Select a picture mode (Picture Mode) suitable for the environment where the product will be used.
On/Off Timer
――You must set the clock before you can use On/Off Timer.
Set On Timer so that your product turns on automatically at a time and on a day of your choosing.
The power is turned on with the specified volume or input source.
Ticker
Input text while a video or image is displayed and display the text on the screen.
More settings
The picture settings menu appears.
Reset All
MENU m → Support → Reset All → ENTER E
Support
Reset All
-- The displayed image may differ depending on the model.
This option returns all the current settings for a display to the default factory settings.
Playing photos, videos and music (Media Play)
Enjoy videos, photos, music files saved on a USB Mass Storage Class (MSC) device.
Play photos, videos or music saved on a storage device.
Play a variety of content using the following methods.
•• Using a USB device: Play media content such as videos, photos and music from a USB device.
•• Connecting a storage device: Play media content saved on a storage device such as a smartphone, camera, PC or cloud service.
Read the following before using media play with a USB device
Caution
•• Before connecting a USB device to the product, back up files to ensure your data is not damaged or lost.
Samsung Electronics is not liable for any damage or loss of data.
•• Do not remove a USB device while it is loading.
•• If a USB device is connected using a USB extension cable, the USB device may not be recognized or files saved on the device may not be able to be read.
•• If the product does not recognize a connected USB device, the files on the USB device may be corrupted or may not be able to be played.
If this occurs, connect the USB device to the PC to format the device, then make sure the device is connected properly.
•• USB HDD greater than 2TB is not supported.
Compatible devices with media play
•• Some USB digital cameras, smartphones and audio devices may not be compatible with the product.
•• Media play is only compatible with USB MSC devices.
•• MSC device refers to a Mass Storage Class Bulk-Only Transport device.
Examples of MSC devices include Thumb drives, Flash card readers and USB HDDs. (USB hubs are not supported.)
These MSC devices must be connected directly to a USB port on the product.
•• If more than one Picture Transfer Protocol (PTP) device is connected, only one will work at a time.
•• If multiple MSC devices are connected, some devices may not be recognized. USB devices that require high power (higher than 500mA or 5V) may not be supported.
•• If an overheating warning message appears when a USB device is connected or used, the USB device may not be recognized or function properly.
•• The screensaver activates if the product is left idle for a period of time specified in Auto Protection Time.
•• Power-saving mode on some external hard disk drives may automatically deactivate after connecting to the product.
File system and formats
•• Media play may not function properly with unlicensed multimedia files.
•• Media Transfer Protocol (MTP) is not supported.
•• Supported file systems include FAT16, FAT32 and NTFS (read only).
•• Media play supports the sequential JPEG format.
It does not support the progressive JPEG format.
•• Images with a higher resolution take longer to be displayed on the screen.
•• The maximum JPEG resolution supported is 15360x8640 pixels.
•• If a file is incompatible or corrupted, a message Not Supported File Format. appears.
•• When sorting files in folder view mode, a maximum of 1000 files can be displayed in each folder.
•• If a USB device contains 8000 files and folders or more, some files and folders may not open.
•• DRM MP3 files downloaded from websites that charge a fee cannot be played.
Digital Rights Management (DRM) refers to a system for protecting the copyrights of data circulated via the Internet or other digital media by enabling secure
distribution and/or disabling illegal distribution of the data.
Using a USB device
Connecting a USB device
1
Turn on your product.
2
Connect a USB device containing photo, music and/or movie files to the USB port on the back or side panel of the product.
3
The Player page automatically appears as soon as a USB device connects to the product.
――If only one USB device is connected, files saved on the USB device are displayed automatically.
It is recommended to use a USB HDD that
has a power adapter.
――To view content saved on a USB device, connect the USB device to a USB port on the product.
Removing a USB device
Removing a USB device from Source
1
Press SOURCE on the remote control. Alternatively, go to Source using the OSD menu.
SOURCE → Source
It is recommended to remove a USB
device using the Disconnect USB Device
function.
2
Select USB from Source, and then press the TOOLS button on the remote control. The Options menu is displayed.
3
Select Disconnect USB Device and wait until the USB device is disconnected. The USB device is disconnected.
Playing media content from a PC/mobile device
Approving a PC/mobile device connection
Play photos, videos or music saved on a PC or mobile device.
To play media content from a PC or mobile device on the product, the connection with the PC or mobile device must be approved.
――The media playback feature is available on any devices that support DLNA DMC. The DLNA DMC feature allows you to search media content and control content
playback from a product after connecting a PC or mobile device to the product.
1
Press SOURCE on the remote control. Alternatively, go to Source using the OSD menu.
SOURCE → Source
2
Select Network from Source. The Network Device menu appears.
3
Select Options from the screen, and then select Multimedia Device Settings. A list of devices connected to the product will appear.
4
Select a device and approve the device connection. Playback is only available on devices that are permitted to connect.
――Sending a media content playback request from a PC or mobile device displays a prompt asking if connection with the product is permitted. Conveniently connect
the devices using the prompt.
――For details on how to configure a network, refer to the section Network Settings.
――Ensure the product and PC are connected to the same network subnet.
All IP addresses are made up of four parts separated by dots.
(E.g. IP address 111.222.333.444) The product should have the same IP address as the PC, except for the fourth part of the address, if they are connected to the same
subnet. (E.g. 111.222.333.***)
When connected to a home network (DLNA)
Play content saved on a device connected to a home network.
――Playing media content using a non-Samsung DLNA server may result in a compatibility issue.
――Playback of some media content shared with a PC or mobile device may not be possible depending on the content encoding type or the content file format. Some
functions may not be available.
――Media content may not play properly if there is network congestion. If this is the case, use a USB device.
1
Press SOURCE on the remote control. Alternatively, go to Source using the OSD menu.
SOURCE → Source
2
Select Network from Source. The Network Device menu appears.
3
Select a device connected via the home network (DLNA). A list of files and folders shared with the selected device will appear.
4
Select media content to play from the list. Play the selected media content.
Features provided in the media content list page
SOURCE → Source → USB
The media content list page on a storage device provides the following features.
•• Sort by
Rearrange the media content list under the selected file format in a desired view mode.
-- This menu item is not available if Filter is set to All.
•• Filter
Among Photos, Videos and Music content saved on a storage device, view content files under a desired file format only.
•• Options
-- This menu item is not available if Filter is set to All.
Menu items in the media content list page
Option Name
Operations
Photos
Videos
Music
Slide Show
Start a slideshow.
――This menu item is not available if Sort by is set to Folder.
Encoding
Select an encoding language if the title of media content appears corrupted.
c
Rename Playlist
Rename a playlist.
c
Delete Playlist
Delete a playlist.
c
Add to Playlist
Add files to a playlist or create a new playlist.
c
Play Selected
Select and play desired content from the media content list.
c
c
c
Send
Send media content to another storage device. This is similar to the "copy" feature
on PCs.
c
c
c
Index
Select an index to conveniently locate media content if a storage device contains a
lot of media content.
――Provided indices include dates and alphanumeric characters.
c
c
c
――This menu item is not available if Sort by is set to Folder.
c
Available buttons and features during photo playback
Pressing the E or TOOLS button displays the following buttons. The RETURN button makes the buttons disappear.
•• Pause / Play
Start or stop a slideshow. Using a slideshow, it is possible to play all photos in a folder.
-- Pressing the INFO button while a
device name is selected will display
information about the selected device.
-- Pressing the INFO button while a file is
selected will display information about
the selected file.
•• Previous / Next
View the previous or next photo.
•• Settings
Option Name
Slideshow Settings
Operations
Speed: Change the slideshow speed.
Effects: Apply transition effects between photos.
Rotate
Rotate photos.
Zoom
Zoom in on photos up to 4x.
Picture Mode
Change the Picture Mode.
Background Music
Play background music while viewing photos.
――Make sure a music file is saved on the same device.
――The mini player is displayed while background music (Background Music) is playing. Using the mini player, pause the music currently
playing or change to another music.
Sound Mode
Change the Sound Mode.
――This menu item is only available when background music (Background Music) is playing.
Select Speakers
Select a speaker that will output the background music (Background Music).
――This menu item is only available when background music (Background Music) is playing.
Send
Send open photos to another storage device. This is similar to the "copy" feature on PCs.
Information
View information about a file.
Available buttons and features
during video playback
Option Name
Select Scene
Operations
Thumbnails: Select a scene and play the video from the scene.
――Thumbnails is not available if 1) the thumbnail of the video is not extracted yet, 2) the video
contains audio only or 3) the video play time is shorter than 60 seconds.
Pressing the E or TOOLS button displays the following buttons. The RETURN
button makes the buttons disappear.
Chapter Titles: Select and play another video in the same folder.
Time Bar: You can use the l and r buttons to scan through the file in 10-second intervals or
enter a specific time value to jump to that point in the video.
•• Pause / Play
Pause or play a video.
The following features are available in pause mode. Note that sound cannot
be heard in pause mode.
•• Rewind / Fast forward
Rewind or fast forward a video. Speed up playback up to 3x, if required. To
change the playback speed to the original speed, select ∂.
•• Previous / Next
To play the previous video, select  twice. Selecting  once will play the
current video from the beginning.
To play the next video, select ‚.
•• Settings
Repeat
Configure Repeat.
Repeat One: Play the current video repeatedly.
Repeat All: Play all videos in a folder repeatedly.
Rotate
Rotate an image.
Picture Size
Change the screen size (Picture Size). Supported screen sizes vary depending on the image.
Picture Mode
Change the Picture Mode.
Sound Mode
Change the Sound Mode.
Select Speakers
Select a speaker that will output sound from the product.
Audio Language
Play a video using a desired language. This feature only activates when a streaming file that
supports multiple audio formats is playing.
Information
View information about a file.
Available buttons and features during music playback
Pressing the E or TOOLS button displays the following buttons. The RETURN button makes the buttons disappear.
•• Pause / Play
Pause or play music.
•• Rewind / Fast forward
Rewind or fast forward music. Speed up playback up to 3x, if required. To play the previous music file, select ∂ twice.
•• Previous / Next
To play the previous music file, select  twice. Selecting  once will play the current music from the beginning.
To play the next music file, select ‚.
•• Repeat
Configure Repeat mode. Repeat One plays the current music file repeatedly. Repeat All plays all files in a folder repeatedly.
•• Shuffle
Enable or disable shuffle playback mode.
•• Select Speakers
Select a speaker that will output sound from the product.
•• Sound Mode
Change the Sound Mode.
Supported Subtitle and Media play file formats
Subtitle
External
Internal
•• MPEG-4 timed text (.ttxt)
•• Xsub
Container: AVI
•• SAMI (.smi)
•• SubStation Alpha
Container: MKV
•• SubRip (.srt)
•• SubViewer (.sub)
•• Advanced SubStation Alpha
Container: MKV
•• Micro DVD (.sub or .txt)
•• SubStation Alpha (.ssa)
•• SubRip
Container: MKV
•• Advanced SubStation Alpha (.ass)
•• Powerdivx (.psb)
•• MPEG-4 timed text
Container: MP4
Supported image resolutions
File Extension
Type
Resolution
*.jpg, *.jpeg
JPEG
15360 x 8640
*.png
PNG
1920 x 1080
*.bmp
BMP
1920 x 1080
*.mpo
MPO
15360 x 8640
Supported music file formats
File Extension
Type
Codec
Comments
*.mp3
MPEG
MPEG1 Audio Layer 3
*.m4a, *.mpa, *.aac, *.3ga
MPEG4
AAC
*.flac
FLAC
FLAC
The Seek (jump) function is not supported.
Supports up to 2 channel
Supported Video Formats
•• Video content will not play, or not play correctly, if there is an error in the content or the container.
•• Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec listed in the table above.
•• If the Index Table is in error, the Seek (Jump) function is not supported.
•• You may experience file stuttering while playing a video through a network connection.
•• The menu may take longer to appear if the video’s bit rate exceeds 10Mbps.
•• Some USB/digital camera devices may not be compatible with the player.
Video Decoder
Audio Decoder
Supports up to H.264, Level 4.1
Supports up to WMA 10 Pro 5.1 channel.
H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported.
WMA lossless audio is not supported.
For all Video codecs except MVC, VP8, VP6:
QCELP, AMR NB/WB are not supported.
•• Below 1280 x 720: 60 frame max
•• Above 1280 x 720: 30 frame max
GMC 2 over is not supported.
Supports only BD MVC Spec.
If Vorbis is only in Webm container, supports up to 2 channel.
File
Extension
Container
*.avi
AVI
*.mkv
MKV
*.asf
ASF
*.wmv
MP4
*.mp4
3GP
*.mov
VRO
*.3gp
VOB
*.vro
PS
*.mpg
TS
Video Codec
DivX 3.11 / 4.x / 5.x / 6.x
Resolution
1920 x 1080
Frame rate
(fps)
6~30
Bit rate
(Mbps)
30
Audio Codec
AC3
LPCM
ADMPCM
MPEG4 SP / ASP
(IMA, MS)
AAC
HE-AAC
H.264 BP / MP / HP
WMA
DD+
Motion JPEG
MPEG(MP3)
*.mpeg
DTS Core
*.ts
Window Media Video v9
G.711(ALaw,μ-Law)
*.tp
*.trp
MPEG2
*.mov
*.flv
MPEG1
*.vob
*.svi
*.m2ts
*.mts
*.divx
*.webm
WebM
VP6
640 x 480
MVC
1920 x 1080
VP8
4
24 / 25 / 30
40
6 ~ 30
8
Vorbis
Troubleshooting Guide
Requirements Before Contacting Samsung Customer Service Center
Before calling Samsung Customer Service
Center, test your product as follows. If
the problem persists, contact Samsung
Customer Service Center.
Testing the Product
Check if your product is operating normally by using the product test function.
If the screen remains blank while the power LED blinks even when the product is correctly connected to a PC, perform product testing.
If the screen remains blank, check the PC
system, video controller and cable.
1
Power off both the PC and product.
2
Disconnect all the cables from the product.
3
Power on the product.
4
If No Signal is displayed, the product is operating normally.
Checking the Resolution and Frequency
Not Optimum Mode will briefly be displayed if a mode that exceeds a supported resolution is selected
(refer to Supported Resolutions).
Check the followings.
Installation issue (PC mode)
The screen keeps switching on and off.
Check the cable connection between the product and PC, and ensure the connection is secure.
Blank spaces are found on all four sides of the screen when
an HDMI or HDMI-DVI cable is connected to the product and
PC.
The blank spaces found on the screen have nothing to do with the product.
Blank spaces on the screen are caused by the PC or graphics card. To resolve the problem, adjust the
screen size in the HDMI or DVI settings for the graphics card.
If the graphics card settings menu does not have an option to adjust the screen size, update the
graphics card driver to the latest version.
(Please contact the graphics card or computer manufacturer for further details about how to adjust
the screen settings.)
PC is shown in Source when a PC is not connected.
PC is always shown in Source irrespective of whether or not a PC is connected.
Screen issue
The power LED is off. The screen will not switch on.
Make sure that the power cord is connected.
No Signal is displayed on the screen.
Check that the product is connected correctly with a cable
Check that the device connected to the product is powered on.
Not Optimum Mode is displayed.
This message is displayed when a signal from the graphics card exceeds the product's maximum
resolution and frequency.
Refer to the Standard Signal Mode Table and set the maximum resolution and frequency according to
the product specifications.
The images on the screen look distorted.
Check the cable connection to the product
Screen issue
The screen is not clear. The screen is blurry.
Adjust Coarse and Fine.
Remove any accessories (video extension cable, etc) and try again.
Set the resolution and frequency to the recommended level.
The screen appears unstable and shaky.
There are shadows or ghost images left on the screen.
Check that the resolution and frequency of the PC and graphics card are set within a range compatible
with the product. Then, change the screen settings if required by referring to the Additional
Information on the product menu and the Standard Signal Mode Table.
The screen is too bright. The screen is too dark.
Adjust Brightness and Contrast.
Screen color is inconsistent.
Go to Picture and adjust the Color Space settings.
White does not really look white.
Go to Picture and adjust the White Balance settings.
There is no image on the screen and the power LED blinks
every 0.5 to 1 second.
The product is in power-saving mode.
The product will turn off automatically.
Go to System and make sure Sleep Timer is set to Off.
Press any key on the keyboard or move the mouse to return to the previous screen.
If a PC is connected to the product, check the power status of the PC.
Make sure the power cable is connected properly to the product and power outlet.
If the signal from a connected device is not detected, the product automatically turns off after 10 to 15
minutes.
Picture quality of the product is different from the dealer
shop where it was purchased.
Use an HDMI cable to obtain high-definition (HD) picture quality.
Screen issue
The screen display does not look normal.
Encoded video content may cause the display to appear corrupted in scenes featuring fast moving
objects such as in a sports event or action video.
Low signal level or low picture quality may cause the display to appear corrupted. This does not mean
the product is defective.
A cell phone within a distance of one-meter radius may cause static on analog and digital products.
The brightness and color do not look normal.
Go to Picture and adjust the screen settings such as Picture Mode, Color, Brightness and
Sharpness.
Go to System and adjust the Energy Saving settings.
Reset the screen settings to the default settings.
Broken lines are displayed on the edges of the screen.
If Picture Size is set to Screen Fit, change the setting to 16:9.
Lines (red, green or blue) are displayed on the screen.
These lines are displayed when there is a defect in DATA SOURCE DRIVER IC on the monitor. Contact a
Samsung Service Center to resolve the issue.
The display looks unstable and then freezes.
The screen may freeze when a resolution other than the recommended resolution is used or if the
signal is not stable. To resolve the issue, change the PC resolution to the recommended resolution.
The screen cannot be displayed in full screen.
A scaled SD (4:3) content file can cause black bars on both sides of an HD channel screen.
A video with an aspect ratio different from the product can cause black bars at the top and bottom of
the screen.
Change the screen size setting to full screen on the product or source device.
Sound issue
There is no sound.
Check the connection of the audio cable or adjust the volume.
Check the volume.
Sound issue
The volume is too low.
Adjust the volume.
If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound
card or software program.
Video is available but there is no sound.
If an HDMI cable is connected, check the audio output settings on the PC.
Go to Sound and change Speaker Settings to Internal.
If a source device is used
•• Make sure the audio cable is properly connected to the audio input port on the product.
•• Check the audio output settings for the source device.
(For example, if an HDMI cable is connected to the monitor, the audio setting for the cable box
may need to be changed to HDMI.)
If a DVI-HDMI cable is used, a separate audio cable is required.
If the product has a headphone port, make sure nothing is connected to it.
Reconnect the power cable to the device and then reboot the device.
There is static coming from the speakers.
Check the cable connection. Make sure a video cable is not connected to an audio input port.
Check the signal strength after connecting a cable.
Low signal level can cause corrupted sound.
There is audible sound when the volume is muted.
When Speaker Settings is set to External, the volume button and mute function are disabled.
Adjust the volume for the external speakers.
Audio settings for main speakers are separate from the internal speakers on the product.
Changing or muting the volume on the product does not affect an external amplifier(decoder).
Sound from the monitor does not change after Sound Mode
is changed.
Audio settings for main speakers are separate from the internal speakers on the product.
Audio settings on a source device do not affect the internal speaker settings on the product.
Sound issue
There is an echo sound coming from the speakers.
Different decoding speeds between the product speakers and external speakers can cause an echo.
In this case, set Speaker Settings to External.
Remote control issue
The remote control does not work.
Make sure that the batteries are correctly in place (+/-).
Check if the batteries are flat.
Check for power failure.
Make sure that the power cord is connected.
Check for any special lighting or neon signs switched on in the vicinity.
Source device issue
A beeping sound is heard when my PC is booting.
If a beeping sound is heard when your PC is booting, have your PC serviced.
Other issue
Caption is grayed out and not selectable.
If the selected input source is not TV, Caption cannot be selected from the OnScreen Display menu.
Caption can be enabled from a source device.
The product smells like plastic.
The plastic smell is normal and disappears over time.
The monitor appears tilted.
Remove and then attach the stand again to the product.
Audio or video cuts out intermittently.
Check the cable connection and connect it again if required.
Using a very hard or thick cable may corrupt audio and video files.
Make sure cables are flexible enough to ensure durability. When mounting the product onto a wall, it
is recommended to use right-angle cables.
Small particles are found on the edges of the product.
The particles are part of the product design. The product is not defective.
The PIP menu is not available.
The menu is enabled or disabled depending on the Source mode.
When I try to change the PC resolution, a message "The
defined resolution is not currently supported." appears.
The message "The defined resolution is not currently supported." appears if the input source
resolution exceeds the maximum resolution of the display.
To resolve the issue, change the PC resolution to a resolution supported on the display.
There is no sound from the speakers in HDMI mode when a
DVI-HDMI cable is connected.
DVI cables do not transmit sound data.
HDMI Black Level is not functioning properly on an HDMI
device with YCbCr output.
This function is available only when a source device, such as a DVD player and STB, is connected to the
product via an HDMI (RGB signal) cable.
Make sure to connect the audio cable to the correct input jack to enable audio.
Other issue
There is no sound in HDMI mode.
Displayed picture colors may not look normal. Video or sound may not be available. This can occur if a
source device that only supports an older version of the HDMI standard is connected to the product.
If these issues occur, connect an audio cable along with the HDMI cable.
Some PC graphics cards may not automatically recognize HDMI signals that do not include sound. In
this case, manually select a sound input.
Sound input
Screen mode
PC
Auto
PC settings
DVI PC
Audio In (Stereo ports)
PC settings
Other issue
The IR sensor is not functioning.
Make sure the sensor light turns on when a button is pressed on the remote control.
•• If the sensor light does not turn on, turn the power switch off and then on again on the back of
the product.
(The power LED lights up red when the screen is switched off.)
If the sensor light still does not turn on after the power switch is turned off and then on again, an
internal jack may be disconnected.
Contact your nearest service center to have the product serviced.
•• If the sensor light that is on does not flash red when a button is pressed on the remote control,
the IR sensor may be defective.
Contact your nearest service center to have the product serviced.
•• This function is available only when a source device, such as a DVD player and STB, is connected
to the product via an HDMI (RGB signal) cable.
In power-saving mode, when the input source is DisplayPort,
PC display settings cannot be saved.
•• Go to System → General and set Max. Power Saving to Off. Alternatively, configure the PC
display output settings again. Ensure the set is turned on.
When booting the PC with the input source set to
DisplayPort, the BIOS and booting screens do not appear.
•• Boot the PC when the set is turned on or when the input source is not DisplayPort.
Q&A
Question
How can I change the frequency?
Answer
Set the frequency on your graphics card.
•• Windows XP: Go to Control Panel → Appearance and Themes → Display → Settings →
Advanced → Monitor and adjust the frequency in Monitor Settings.
•• Windows ME/2000: Go to Control Panel → Display → Settings → Advanced → Monitor and
adjust the frequency in Monitor Settings.
-- Refer to the user manual for your PC or
graphics card for further instructions on
adjustment.
•• Windows Vista: Go to Control Panel → Appearance and Personalization → Personalize →
Display Settings → Advanced Settings → Monitor and adjust the frequency in
Monitor Settings.
•• Windows 7: Go to Control Panel → Appearance and Personalization → Display →
Adjust resolution → Advanced Settings → Monitor and adjust the frequency in
Monitor Settings.
•• Windows 8: Go to Settings → Control Panel → Appearance and Personalization → Display
→ Adjust resolution → Advanced Settings → Monitor and adjust the frequency in
Monitor Settings.
How can I change the resolution?
•• Windows XP: Go to Control Panel → Appearance and Themes → Display → Settings and
adjust the resolution.
•• Windows ME/2000: Go to Control Panel → Display → Settings and adjust the resolution.
•• Windows Vista: Go to Control Panel → Appearance and Personalization → Personalize →
Display Settings and adjust the resolution.
•• Windows 7: Go to Control Panel → Appearance and Personalization → Display →
Adjust Resolution and adjust the resolution.
•• Windows 8: Go to Settings → Control Panel → Appearance and Personalization → Display
→ Adjust Resolution and adjust the resolution.
Question
How do I set powersaving mode?
Answer
•• Windows XP: Set power-saving mode in Control Panel → Appearance and Themes → Display
→ Screen Saver Settings or BIOS SETUP on the PC.
•• Windows ME/2000: Set power-saving mode in Control Panel → Display →
Screen Saver Settings or BIOS SETUP on the PC.
•• Windows Vista: Set power-saving mode in Control Panel → Appearance and Personalization
→ Personalize → Screen Saver Settings or BIOS SETUP on the PC.
•• Windows 7: Set power-saving mode in Control Panel → Appearance and Personalization →
Personalize → Screen Saver Settings or BIOS SETUP on the PC.
•• Windows 8: Set power-saving mode in Settings → Control Panel →
Appearance and Personalization → Personalize → Screen Saver Settings or BIOS SETUP on
the PC.
Specifications
-
General
Size
Model Name
Panel
-
Display area
H
V
Dimensions (W x H x D)
D
H
W
Size
82 CLASS (81.5 inches / 207 cm)
Display area
1805.76 mm (H) x 1015.74 mm (V) / 71.09 inches (H) x 39.99 inches (V)
Dimensions (W x H x D)
1854.2 x 1064.2 x 89.3 mm (48.5 mm Without Handle) / 73.00 x 41.90 x 3.52 inches (1.91 inches Without Handle)
Weight (without stand)
48.5 kg / 106.92 Ibs
Power Supply
AC 100 to 240 VAC (+/- 10%), 60 / 50 Hz ± 3 Hz
Refer to the label at the back of the product as the standard voltage can vary in different countries.
Environmental
considerations
-
DM82D
Operating
Temperature : 32 F - 104 F (0 C - 40 C)
Humidity : 10 % - 80 %, non-condensing
Storage
Temperature : -4 F - 113 F (-20 C - 45 C)
Humidity : 5 % - 95 %, non-condensing
――Plug-and-Play
This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor
settings.
Monitor installation takes place automatically. However, you can customize the installation settings if desired.
――Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter or darker on the panel. This does not affect
product performance.
――This device is a Class A digital apparatus.
(USA only)
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website:
www.samsung.com/recyclingdirect or call, (877) 278 - 0799
PowerSaver
The power-saving function of this product reduces power consumption by switching off the screen and changing the color of the power LED if the product is not used
for a specified period of time. The power is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or move the mouse. Powersavign mode only functions when the product is connected to a PC with a power-saving function.
PowerSaver
Normal Operation
Rating
Power Indicator
Off
Power Consumption
330 W
Typical
138 W
Max
363 W
Power saving mode
Power off Power off
(SOG Signal : Not Support the DPM Mode)
(Power Switch)
Blinking
On
Off
0.5 W
0.5 W
0W
――The displayed power consumption level can vary in different operating conditions or when settings are changed.
――SOG (Sync On Green) is not supported.
――To reduce the power consumption to 0, turn off the switch at the back or disconnect the power cord. Disconnect the power cable if you will not be using the product
for an extended period of time (during vacation, etc.).
Preset Timing Modes
――This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than
the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for your product.
――Check the frequency when you exchange a CDT product (connected to a PC) for an LCD product. If the LCD product does not support 85 Hz, change the vertical
frequency to 60 Hz using the CDT product before you exchange it with the LCD product.
Model Name
Synchronization
-- Horizontal Frequency
The time required to scan a single line
from the left to the right side of the
screen is called a horizontal cycle. The
reciprocal number of a horizontal cycle
is called horizontal frequency. Horizontal
frequency is measured in kHz.
-- Vertical Frequency
The product displays a single image
multiple times per second (like a
fluorescent light) to display what the
viewer sees. The rate of a single image
being displayed repeatedly per second is
called vertical frequency or refresh rate.
Vertical frequency is measured in Hz.
Resolution
DM82D
Horizontal Frequency
30 - 81 kHz
Vertical Frequency
48 - 75 Hz
Optimum resolution
1920 x 1080 @ 60 Hz
Maximum resolution
1920 x 1080 @ 60 Hz
The screen will automatically be adjusted if a signal that belongs to the following standard signal modes is transmitted from your PC. If the signal transmitted from the PC
does not belong to the standard signal modes, the screen may be blank with the power LED on. In such a case, change the settings according to the following table by
referring to the graphics card user manual.
Resolution
Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
IBM, 720 x 400
31.469
70.087
28.322
-/+
MAC, 640 x 480
35.000
66.667
30.240
-/-
MAC, 832 x 624
49.726
74.551
57.284
-/-
MAC, 1152 x 870
68.681
75.062
100.000
-/-
VESA, 640 x 480
31.469
59.940
25.175
-/-
VESA, 640 x 480
37.861
72.809
31.500
-/-
Resolution
Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
VESA, 640 x 480
37.500
75.000
31.500
-/-
VESA, 800 x 600
35.156
56.250
36.000
+/+
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 800 x 600
48.077
72.188
50.000
+/+
VESA, 800 x 600
46.875
75.000
49.500
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
VESA, 1024 x 768
56.476
70.069
75.000
-/-
VESA, 1024 x 768
60.023
75.029
78.750
+/+
VESA, 1152 x 864
67.500
75.000
108.000
+/+
VESA, 1280 x 720
45.000
60.000
74.250
+/+
VESA, 1280 x 800
49.702
59.810
83.500
-/+
VESA, 1280 x 1024
63.981
60.020
108.000
+/+
VESA, 1280 x 1024
79.976
75.025
135.000
+/+
VESA, 1366 x 768
47.712
59.790
85.500
+/+
VESA, 1440 x 900
55.935
59.887
106.500
-/+
VESA, 1600 x 900
60.000
60.000
108.000
+/+
VESA, 1680 x 1050
65.290
59.954
146.250
-/+
VESA, 1920 x 1080
67.500
60.000
148.500
+/+
Appendix
Responsibility for the Pay Service
(Cost to Customers)
――When the service is requested, in spite of in warranty, we may charge you for a visit from a service
technician in the following cases.
Not a product defect
Cleaning of the product, Adjustment, Explanation, Re-installation and etc.
•• If a service technician gives instructions on how to use product or simply adjusts options without
disassembling product.
•• If a defect is caused by external environmental factors (Internet, Antenna, Wired Signal, etc.)
•• If a product is reinstalled or devices are connected additionally after installing the purchased
product for the first time.
•• If a product is reinstalled to move to a different spot or to move to a different house.
•• If customer requests instructions on how to use because of another company's product.
•• If customer requests instructions on how to use the network or another company's program.
•• If customer requests software installation and setup for the product.
•• If a service technician removes/cleans dusts or foreign materials inside of the product.
•• If customer requests an installation additionally after purchasing a product through homeshopping or online.
A Product damage caused by customer's fault
Product damage caused by customer's mishandling or wrong repair
If a product damage is caused by;
•• External impact or drop.
•• Use of supplies or separatly sold product unspecified by Samsung.
•• Repair from a person besides an engineer of outsourcing service company or partner of Samsung
Electronics Co., Ltd.
•• Remodeling or repairing the product by customer.
•• Using it with incorrect voltage or non-authorised electrical connections.
•• Not following the "cautions" in User Manual.
Others
•• If product fails by natural disaster. (lightning, fire, earthquake, flood damage, etc)
•• If consumable components are all used up. (Battery, Toner, Fluorescent lights, Head, Vibrator, Lamp,
Filter, Ribbon, etc.)
――If customer requests a service in case the product has no defect, service fee may be charged. So
please read User Manual first.
Optimum Picture Quality and Afterimage
Burn-in Prevention
Black Matrix
Common
Electrode (ITO)
Color-Filter
Optimum Picture Quality
•• Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm)
may be brighter or darker on the panel. This does not affect product performance.
-- The number of sub-pixels by panel type: 6,220,800
Source
Drain
•• Run Auto Adjustment to improve the picture quality. If noise is still found even after auto
adjustment, adjust Coarse or Fine.
•• Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage
burn-in or defective pixels.
-- Activate power-saving mode or a dynamic screen saver if you will not be using the product for
an extended period of time.
Gate
TFT
Data Bus-Line
Prevention of Afterimage Burn-in
What is afterimage burn-in?
Afterimage burn-in should not occur when the LCD panel is operating normally. Normal operation refers
to a continuously changing video pattern. If the LCD panel displays a fixed pattern for an extended period
of time (more than 12 hours), a slight voltage difference may occur between the electrodes in pixels that
control the liquid crystals.
Such a voltage difference between electrodes increases with time and makes the liquid crystals thinner.
When this occurs, a previous image can remain on the screen when the pattern changes. To prevent this,
the accumulated voltage difference should be reduced.
――Afterimage burn-in should not occur when an LCD panel is operating in proper conditions.
Pixel Electrode (ITO)
Storage
Capaccitor (Cs)
Preventing afterimage burn-in
――The best way to protect the product from afterimage burn-in is switching the power off or setting the
PC or system to run a screen saver when not in use. Also, Warranty service may be limited depending
on instruction guide.
•• Powering Off, Screen Saver and Power Saving Mode
-- Power off the product for 2 hours after using it for 12 hours.
-- Go to Display Properties > Power Supply on your PC and set the product to power off as
required.
-- Using a screen saver is recommended.
It is best to use a single-color or moving-image screen saver.
FLIGHT : TIME
OZ348
: 20:30
FLIGHT : TIME
OZ348
•• Regular color Change
-- Use 2 colors
Switch between 2 colors every 30 minutes as shown above.
Type 1
•• Regular Text color Change
-- Use bright colors of similar brightness.
Interval: Change text color and background color every 30 minutes
: 20:30
FLIGHT : TIME
OZ348
: 20:30
FLIGHT : TIME
OZ348
: 20:30
-- Move and change text every 30 minutes as shown below.
Type 2
FLIGHT
TIME
FLIGHT
TIME
OZ348
20:30
OZ348
20:30
UA102
21:10
UA102
21:10
•• Avoid combinations of a text color and background color of contrasting brightness.
(Brightness: refers to the lightness or darkness of a color which varies depending on the amount of
light emitted.)
――Avoid using grey as it may contribute to afterimage burn-in.
――Avoid using colors of contrasting brightness (black and white; grey).
FLIGHT : TIME
FLIGHT : TIME
OZ348 : 20:30
OZ348 : 20:30
FLIGHT
: TIME
OZ348
: 20:30
[ Step 1 ]
[ Step 2 ]
FLIGHT
: TIME
OZ348
: 20:30
[ Step 3 ]
-- Regularly display a moving image along with a logo.
Interval: Display a moving image along with a logo for 60 seconds after using for 4 hours.
License
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
DivX Certified Ⓡ to play DivX Ⓡ video up to HD 1080p, including premium
content.
DivXⓇ, DivX CertifiedⓇ and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.
Ⓡ
Manufactured under a license from U.S. Patent No’s: 5,956,674, 5,974,380,
5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567, 7,668,723,
7,392,195, 7,930,184, 7,333,929 and 7,548,853. DTS, the Symbol, and DTS and
the Symbol together are registered trademarks & DTS Premium Sound | 5.1 is a
trademark of DTS, Inc. ⓒ2012 DTS, Inc. All Rights Reserved.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in
the United States and other countries.
ABOUT DIVX VIDEO: DivXⓇ is a digital video format created by DivX, LLC, a subsidiary of Rovi
Corporation. This is an official DivX CertifiedⓇ device that has passed rigorous testing to verify that
it plays DivX video. Visit divx.com for more information and software tools to convert your files into
DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX CertifiedⓇ device must be registered in order to play
purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the
DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to
complete your registration.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274
Open Source License Notice
In the case of using open source software, Open Source Licenses are available on the product menu.
Open Source License Notice is written only English.
For information on the Open Source License Notice, contact the Samsung Customer Center or send
email to oss.request@samsung.com.
Terminology
480i / 480p / 720p / 1080i /
1080p____ Each of the scanning
rates above refers to the number of
effective scanning lines that decides
the screen resolution. The scanning
rate may be indicated in i (interlaced)
or p (progressive), depending on the
scanning method.
- Scanning
Scanning refers to a process of sending
pixels that form an image progressively.
A larger number of pixels will deliver a
clearer and more vivid picture.
- Progressive
In progressive scan mode, all lines
of pixels are scanned one by one
(progressively) on the screen.
- Interlaced
In interlaced scan mode, every other
line of pixels is scanned from top to
bottom first and then the remaining
lines of pixels (that were not scanned)
are scanned.
Non-interlace Mode and Interlace
Mode____ Non-interlace mode
(progressive scan) displays a horizontal
line from the top to the bottom of a
screen progressively. Interlace mode
displays the odd number lines first
and the even number lines next. Noninterlace mode is mainly used in
monitors as it produces screen clarity
and interlace mode is mainly used in
TVs.
Dot Pitch____ The screen consist of
red, green and blue dots. A shorter
distance between the dots produces a
higher resolution. Dot pitch refers to the
distance between the shortest distance
between dots of the same color. Dot
pitch is measured in millimeters.
Vertical Frequency____ The product
displays a single image many times
per second (like a fluorescent light that
flickers) to display an image for a viewer
to see. The rate of a single image being
displayed repeatedly per second is
called vertical frequency or refresh rate.
Vertical frequency is measured in Hz.
E.g. 60Hz refers to a single image being
displayed 60 times in one second.
Horizontal Frequency____ The time
required to scan a single line from the
left to the right side of the screen is
called a horizontal cycle. The reciprocal
number of a horizontal cycle is called
horizontal frequency. Horizontal
frequency is measured in kHz.
Source____ Input source refers to a
video source device connected to the
product such as a camcorder or video
or DVD player.
Component ports (green, blue and
red)____ The component ports, which
identify, transmit and receive contrast
signals, provide superior picture quality
to any other video connection methods.
DVD (Digital Versatile Disc)____ DVD
refers to a CD-sized mass storage disk
where you can save multimedia (audio,
video or game) applications using
MPEG-2 video compression technology.
Plug & Play____ Plug & Play is a
function that allows the automatic
exchange of information between a
monitor and PC to produce an optimum
display environment. The product uses
VESA DDC (international standard) to
execute Plug & Play.
HDMI (High Definition Multimedia
Interface)____ It is an interface that
can be connected to a digital audio
source as well as a high-definition video
source by using a single cable without
compression.
Resolution____ Resolution is the
number of horizontal dots (pixels) and
vertical dots (pixels) that form a screen.
It represents the level of display detail.
A higher resolution enables more
data to be displayed on the screen
and is useful to perform multiple tasks
simultaneously.
E.g. A resolution of 1920 X 1080 consists
of 1,920 horizontal pixels (horizontal
resolution) and 1,080 vertical pixels
(vertical resolution).
Multiple Display Control (MDC)____
MDC (Multiple Display Control) is an
application that allows multiple display
devices to be controlled simultaneously
using a PC. Communication between
a PC and monitor takes place using
RS232C (serial data transmission) and
RJ45 (LAN) cables.
Download PDF

advertising