Samsung | WA90F5S2UWW/NQ | Samsung WA90F5S2UWW/NQ 사용자 매뉴얼

WA90F5S2
WA11F5S2
WA13F5S2
Washing Machine
user manual
This manual is made with 100% recycled paper.
imagine the possibilities
Thank you for purchasing a Samsung
product.
To receive a more complete service, please
register your product at
www.samsung.com/register
DC68-03273M-02
F500S_W3050_WA10F5_GOOD-03273M-02_EN(FA)
24/02/2014
contents
SAFETY INSTRUCTIONS
3
Imporant safety precautions
7
10
11
Description of part
How to wash automatically depends on the
laundry
Control Panel
MANUAL FUNCTIONS
13
Manual functions
INSTALLATION & MAINTENANCE
14
14
14
15
16
17
17
18
18
18
18
Environment
Leveling
Connecting the water supply hose
Assembling the rat protection panel (option)
How to connect the drain hose (option)
Adding detergent
Adding fabric softener
Water supply connector filter
Cleaning the filter
Cleaning the pump filter (option)
Cleaning the detergent compartment
TROUBLESHOOTING
19
Troubleshooting
WASHING MACHINE WON’T WORK?
20
Washing machine won’t work?
SPECIFICATION
22
Specification
3
SETTING UP YOUR WASHER
7
13
14
19
20
22
2_contents
F500S_W3050_WA10F5_GOOD-03273M-02_EN(FA)
24/02/2014
safety instructions _3
F500S_W3050_WA10F5_GOOD-03273M-02_EN(FA)
24/02/2014
4_ safety instructions
F500S_W3050_WA10F5_GOOD-03273M-02_EN(FA)
24/02/2014
safety instructions _5
F500S_W3050_WA10F5_GOOD-03273M-02_EN(FA)
24/02/2014
6_ safety instructions
F500S_W3050_WA10F5_GOOD-03273M-02_EN(FA)
24/02/2014
setting up your washer
DESCRIPTION OF PART
The User’s Manual is for common use.
Make use of the User’s Manual depending upon your washing machine model.
01 SETTING UP YOUR WASHER
Water supply hose (Cold)
Lid
Be sure to keep the lid closed
during washing and spinning.
Water supply hose (Hot)
Detergent box
Fabric softener
dispenser
Filter
Lint will be
collected in the
filter during
washing.
Spin basket
Front control
panel
Power cord
Ground lead
When the water pipe
is metal, make sure
to cover the end of
the ground wire.
Rat protection panel
Water drain hose
Adjustable legs
Adjust the length
of the legs when
installing the washer.
setting up your washer _7
F500S_W3050_WA10F5_GOOD-03273M-02_EN(FA)
24/02/2014
CHECKING BEFORE WASHING AND CARING FOR GARMENTS
Must follow the checkpoints in order to avoid machine problems or damages on garments.
• If the below problems are caused by customer’s faults, separate service fee will be charged.
Checkpoints Before Starting Washing
Check if the clothes are bleaching or not.
• Add liquid detergent to a white towel and the garment where you can’t notice well. Then, rub
together strongly. Check if the color transferred to the towel.
• Be careful for scarves and imported clothes since they are easily discoloring.
• Check for stains or partial dirt.
• If stains are found, use the towel wet with detergents to rub on in a single direction.
• Before washing, the sleeves, collar, dress hem and pockets are pre-treated by brushing with
detergents.
The wrinkle-processed clothes made of wool are specially treated by fixing them with threads
before washing. The threads shall be removed after the clothes are dried.
Not washable laundry
Clothes those are easily transformable even by soaking in water.
• Even by soaking in water, neckties, brassieres, jackets, suits and coats can be easily
transformed like shrinking and discoloring on the garment surfaces because they are mostly
made of rayon, polynosic, cuff and their blend fabrics.
• The wrinkle-processed, embossed, or resin processed products are easy to transform even
by soaking in water.
• Easily discoloring products made of cotton and wool, wrinkled silk, leather products, leather
accessory, leather ornamented clothes and its accessory.
• Don’t wash those clothes without handling guideline or material indication tag.
About Detergent
• When detergents are not dissolving well, use warm water (about 40°C) to dissolve the
detergent.
• Use an appropriate amount.
Even if excess amount of detergent is used, there is not much difference in washing
CAUTION •
result. It may cause damages to the garments because rinsing is not enough.
• The bleaching agent may cause damages to garments since it is strong alkali.
• Do sufficient rinsing because the powder detergent is easily remained on the garments
causing bad odors.
• If too much detergent is used or cold water is used, it doesn’t dissolve completely and
remain on the garments, hose or spin basket, causing contamination on clothes.
• In case of reserved washing, detergents must be put in the detergent box. If the powder
detergents are spread on laundry directly, it may cause discoloration.
8_setting up your washer
F500S_W3050_WA10F5_GOOD-03273M-02_EN(FA)
24/02/2014
setting up your washer
CARING FOR CLOTHES BEFORE WASHING
setting up your washer_9
F500S_W3050_WA10F5_GOOD-03273M-02_EN(FA)
24/02/2014
01 SETTING UP YOUR WASHER
Take out personal belongings from pockets.
• Caution, Check the pockets! Hairpins and coins cause damages to
clothes and washing machine. They make noise and problems to
the machine. Must check the pocket.
If pants zippers are open while washing, the spin basket may be
damaged. The zipper should be closed and fixed with a string
before washing.
• Metal on the clothing may cause damage to the clothes and the tub.
• Turn clothing with buttons and embroidered clothes inside out before
washing them.
• Clothing with long strings may become entangled with other clothes,
and may cause damage to the clothing. Be sure to fix the strings
before washing.
Waterproof clothes (Ski Wear, Diaper Covers, Footboards) are not
allowed for washing.
• This may cause the laundry to be ejected or cause the washing machine to vibrate
abnormally, which may result in personal injury or damage the washing machine, the floor
or the clothing. (Diapers, waterproof clothing, raincoats, umbrella covers, skiwear, car cover
sheets, and sleeping bags, etc.).
• When the tub rotates, water may become trapped in the waterproof clothing or fabric and
can collect in a corner, causing abnormal vibrations. In addition, the laundry rises and may be
ejected and cause personal injury.
Shake the dirt or soils from clothes.
• Soil and sands may rub delicate garments to cause damages and the washing result may be
unsatisfactory.
Do pre-washing for white socks, sleeves, and collars before the main washing.
• For stains and dirt on collars, sleeves, hems, and pockets, apply some detergent to them
and apply it lightly with a brush before washing.
• Use powdered or liquid detergent. Do not use soap as the tub may become dirty from the
dirt on it.
Turn inside out for those nappy clothes before washing.
• If clothes have too much foreign matter, separate them for washing.
Other clothes may pick up those dirty matters (dirt, thread).
• Wash black colored clothes and cotton towels separately. If they are
washed together, towels may pick up dirty matters. Check before
washing.
Cashmilon and those garments having big volume and lightweight
(eg. Lasedecorated clothes, lingerie, nylon stocking, synthetic
fabrics etc.) may rise and cause damages to the clothes and
problems to the machine. Use the laundry net or wash them
separately.
• Must put those long stringed clothes, lase-worked clothes, bed cover
sheet, wool clothes into a laundry net before washing.
• Put delicate clothes in the laundry net.
• Use only those commercial laundry net for washing.
Curtains, floating garments or blue jeans shall be pressed not to
float on the water.
• If they are floated on the water, press Start/Pause button to stop and press them to sock in
the water. If the washing goes on with clothes floating on the water, it may cause damages to
the clothes and the washing machine as well as unsatisfactory washing result.
HOW TO WASH AUTOMATICALLY DEPENDS ON THE LAUNDRY
Before starting washing, check the following;
• Connect the water supply hose to the water tap. Leave a tap open. Plug the power cord in. Make sure
to lay down the drain hose.
Washing for the first time
Before washing clothes for the first time, you must run a complete cycle without clothes.
To do this:
1. Press the Power button.
2. Open the detergent drawer and insert a little detergent.
3. Turn on the water supply to the washing machine.
4. Press the Start/Pause button.
This will remove any water from the manufacturer’s test run remaining in the machine.
Special notes!
Automatic Sensing Function
• According to the selected program, the amount of laundry is automatically sensed and then
the appropriate water level, wash time, rinse cycle, and spinning time are automatically
selected for the automatic wash.
• After the power is on, a program is selected and Start/Pause button is pressed. Then,
the washing board starts spinning without water. This action senses how much laundry is
in the washing basket, not a machine problem. After this sensing process, water supplies
automatically.
Adding Detergent and Softener
• It senses the amount of laundry and indicates the water level and amount of detergent. Then,
it starts water supply right away.
• During the water supply, it is possible to open the detergent box and add detergent.
However, it is better to press Start/Pause button to stop water supply and add detergent.
Close the lid and press Start/Pause button again. This way is much more convenient.
• If the softener is inserted in the softener dispenser, it automatically adds in at the last rinsing
cycle.
Put the laundry into the washer and add detergent, too.
• Be careful not to overload. Use right detergent for the fabrics you are washing.
•
•
•
If the lid is open while running, the washing machine is stopped automatically for safety.
(Except, water supply continues while the lid is open.)
When hot water is selected, both cold and hot water are supplied for the first
20 seconds in order to protect the clothes.
Possible to control the washing time, rinsing cycle, and spinning time at every program
during the washing.
10_setting up your washer
F500S_W3050_WA10F5_GOOD-03273M-02_EN(FA)
24/02/2014
setting up your washer
CONTROL PANEL
For more details, see control panel of your washing machine.
1
3
4
5
6
8
9
1
Digital
graphic
display
Displays the remaining wash time.
Displays the error state if a problem occurs in the washing machine so that you
can take action.
2
Water Label
The water level is automatically adjusted. However, you can select the water level
manually by pressing this button.
3
Press this button repeatedly to cycle through the water temperature and Air Turbo
Temp./Option option:
Cold > Cold, Air Turbo > Cold/Hot > Cold/Hot, Air Turbo > Hot > Hot, Air Turbo
4
Wash
Press this button to perform a wash only or to adjust the washing time.
You can set the wash time from between 6 to 30 minutes.
5
Rinse
Press this button to perform a rinse only or to adjust the rinse count.
You can set the rinse count up to five times.
6
Spin
Press this button to perform a spin cycle only or to adjust the spin time.
You can set the spin time from between 1 to 9 minutes.
When only a spin is selected, the spin time will be different from the total
remaining time. This is because the total remaining time includes the actual spin
time and the times for water draining and stopping.
7
Power
Press this button once to operate.
Press it again to turn the power off.
8
Start/Pause
Use to pause and restart the operation.
To change the washing procedure during an operation,
press this button to stop, and again to restart after changing the procedure.
setting up your washer_11
F500S_W3050_WA10F5_GOOD-03273M-02_EN(FA)
24/02/2014
01 SETTING UP YOUR WASHER
2
7
9
Fuzzy
Selects the best washing program automatically.
Quick
If you want to wash those frequently used towels or less dirty
laundry time. Because washing is speedy, it is good for light
or less stained laundry.
Soak
Press this button to perform a soak wash.
Soak time is set up as minutes. Can not change the soak
time.
Blanket
Big volume laundry like blanket and bed cover sheets
Apua Preserve
If you wish to reuse the remaining water from the rinse cycle.
This option helps save the amount of water used.
Eco Tub Clean
Use this program to clean the tub, it will keep the tub clean
and sanitary.
The TUB CHECK LED is turned on to notify the user that it is
time to clean the tub.
The powerful spinning force of the washing tub pulsator
removes the contaminations from the exterior of the washing
tub to prevent odors or secondary contamination.
Cycle
CHILD LOCK
This function is for protecting children, the elderly and the frail.
1. Press the Power button.
2. To activate the Child Lock function, press and hold both the Rinse and Spin buttons down
simultaneously for 3 seconds. (If the Child Lock function is activated, the Child Lock icon
blinks.)
3. Operations after activating the Child Lock function.
• Even if the Child Lock function is activated, every button works until the door opens.
• When you open the door during the Child Lock is being activated, the alarm sounds and
an error message appears. In 30 seconds, draining begins automatically. However, if you
close the door within 30 seconds, water will not be drained. (Displayed error message
“CL”, “dE”).
• To add laundry after activating the Child Lock function, you must deactivate the
Child Lock function.
4. To deactivate the Child Lock function, press and hold both the Rinse and Spin buttons
simultaneously for 3 seconds again. (If the Child Lock function is deactivated, the Child Lock
icon is turned off.)
5. To clear “CL” display, after draining is complete, close the door of the washing turn the
power off and then on.
- This function is for preventing injury and malfunction of the product because of
inappropriate operations or actions by children, the elderly or the frail.
CAUTION
- If the door opens when the Child Lock function is activated, the water is drained by
force to prevent children from drowning.
- To add laundry after activating the Child Lock function, you must deactivate the
Child Lock.
- Even if the power is turned off and then on when the Child Lock is activated, the
Child Lock remains activated.
- Once Child Lock is activated, even when the power is turned off, if the door is
opened, water is automatically drained in 30 seconds.
- The Child Lock function cannot be deactivated when CL is displayed. (However, the
Child Lock function can be deactivated when the dE error is displayed.)
12_setting up your washer
F500S_W3050_WA10F5_GOOD-03273M-02_EN(FA)
24/02/2014
manual functions
Possible to select the function for each program.
(Example) For a simple washing as the little dirt program :
Power  Select the little dirt program  Wash  Start/Pause
WASH ONLY
SPIN ONLY
WASH AND RINSE
RINSE AND SPIN
WASH, RINSE AND SPIN
Press the Rinse button.
Press the Start/Pause button.
Rinsing goes on for 1 time.
When the Rinse button is pressed, the rinse times can be changed
to between 1 to 5 times in duration.
Press the Spin button.
Press the Start/Pause button.
Spin drying goes on for 4 minutes.
When the Spin button is pressed, the spin time can be changed to
from 1 to 9 minutes.
Press the Wash and Rinse button.
Press the Start/Pause button once.
Detects the amount of laundry, and determines wash and rinse time
period automatically. (Option)
When the Wash and Rinse button is pressed, wash time period is
determined between 6 to 30 minutes, and rinse time is determined
between 1 and 5 times.
Press the Rinse and Spin button.
Press the Start/Pause button once.
Rinsing and spin drying follow.
When the Rinse and Spin button is pressed, the number of rinse
times is determined between 1 and 5, and spin time period for
drying is determined between 1 to 9 minutes.
Press the Wash, Rinse and Spin button.
Press the Start/Pause button once.
Wash, Rinse and Spin is performed.
manual functions _13
F500S_W3050_WA10F5_GOOD-03273M-02_EN(FA)
24/02/2014
02 MANUAL FUNCTIONS
RINSE ONLY
Press the Power button.
Press the Wash button.
Press the Start/Pause button.
Washing goes on for 1 time.
When the Wash button is pressed during washing, the wash time
can be changed to between 6 and 30 minutes in duration.
installation & maintenance
The User’s Manual is for common use.
Make use of the User’s Manual depending upon your washing machine model.
ENVIRONMENT
Leave some space
Maintain at least 10 cm between the washer and the wall.
Place the washer on a sturdy flat surface.
If the washer is placed on an uneven or weak surface, noise or vibration occurs. (Allowable is 1˚)
Adjust the legs for even placement.
Never install the washer near water.
Do not place the washer in steamy rooms or where the washer is directly exposed to rain. Moisture may
destroy the electrical insulation causing an electrical shock hazard.
Avoid direct sunlight or heaters.
As plastic an electrical components are affected by direct heat, never place the washer near furnaces,
boilers, etc. Do not place under direct sunlight.
LEVELING
•
If the washer is not leveled with the ground, it makes the machine tremble more or be out of order. So,
make sure that the washer is leveled properly.
SEE IF THE MACHINE IS PLACED LEVEL BY CHECKING
Water
THE POSITION OF THE WASHING TUB.
• Open the lid of the machine, pour water into the tub up
to the level just below the pulsator, and adjust the legs so
that the pulsator is positioned at the center of the water as
shown in the figure.
LOOSEN
LOCK
• Place the machine more than 10 cm away from the wall.
• Adjust the legs on feet for leveling.
CONNECTING THE WATER SUPPLY HOSE
1. Remove the adaptor from the water supply hose.
2. First, using a “+” type screw driver, loosen the four screws
on the adaptor. Next, take the adaptor and turn part (b)
following the arrow for gap about 5 mm between them.
5 mm
3. Connect adaptor to the water tap by tightening the screws
firmly. Then, turn part (b) following the arrow and put (a)
and (b) together.
a
b
14_installation & maintenance
F500S_W3050_WA10F5_GOOD-03273M-02_EN(FA)
24/02/2014
installation & maintenance
4. Connect the water supply hose to the adaptor. Pull down
the part (c) of the water supply hose. When the part (c)
is released, the hose is automatically connected to the
adaptor making a ‘click’ sound.
c
03 INSTALLATION & MAINTENANCE
5. Connect the other end of the water supply hose to the
inlet water valve at the back of the washer. Screw the hose
clockwise all the way in.
5-1. Connect the other end of the water supply hose to the
inlet water valve at the back side of the washer. Screw
the hose clockwise all the way in.
•
If the water tap is a screw type, assemble a water supply
hose that fits to the tap as shown. After completing
connection, if water leaks from the hose, then repeat the
same steps.
After completing connection, if water leaks from the hose, then repeat the same steps.
Use the most conventional type of faucet for water supply.
In case the faucet is square or too big, remove the spacing ring before inserting the faucet
into the adaptor.
ASSEMBLING THE RAT PROTECTION PANEL (OPTION)
Tilt the washer a little and lift up the panel until it clicks as shown in the figure.
Front
1. Insert the rat protection panel to the
assembling hole on front side to the end.
2. If you have difficulty inserting the panel lift
up the washer a little and insert it.
installation & maintenance _15
F500S_W3050_WA10F5_GOOD-03273M-02_EN(FA)
24/02/2014
HOW TO CONNECT THE DRAIN HOSE (OPTION)
IN CASE OF PUMP-DRAINED WASHER
cap-hose
Take out the cap-hose and connect the
outlet-hose. (option)
Be sure to join tightly the drain hose into the
drain outlet on the back of the machine.
90~100 cm
Drain hose
Hose guide
Be sure to join tightly the drain hose into the
drain outlet on the side of the machine.
Install the drain hose in the position of about
90~100 cm above the ground. The end of the
drain hose can not be sinked under water.
IN CASE OF GENERAL WASHER (OPTION)
1. After pressing the joint ring, insert to the drain hose.
2. After directing the drain hose to a drain, join to the
drain outlet of the washing machine.
drain-outlet
3. Be sure to join them tightly by pressing the joint ring and
pushing it into the drain-outlet.
• The length of drain hose is adjustable so that you can
extend the length appropriately.
HOW TO CHANGE THE DRAIN HOSE DIRECTION (OPTION)
•
The handle of joint ring is pressed to pull out the drain hose.
Change the direction of the drain hose and follow the above
guideline again.
16_installation & maintenance
F500S_W3050_WA10F5_GOOD-03273M-02_EN(FA)
24/02/2014
installation & maintenance
CAUTIONS WHEN INSERTING THE DRAIN HOSE
Less than 3 m
2. Be careful to drain water out at the end of
the drain hose.
Less than 3 m
Less than
5 cm
3. The doorsill shouldn’t be more than 5cm. 4. Don’t install the drain hose underneath the
wash machine.
Test run
Make sure that you install your washing machine correctly by running the Rinse+Spin cycle
after the installation is complete.
ADDING DETERGENT
1. Open the detergent drawer and then add the powder
detergent into the detergent compartment.
2. Add detergent evenly so that it doesn’t brim over the
edge of the drawer.
• Use a reasonable amount of detergent.
If you use more detergent than the standard
quantity or the water temperature is too low and the
detergent does not dissolve in the water completely
causing it to remain on the laundry and in the hose and tub, it may cause damage such
as dirtying and discoloring the laundry.
• If you use a powder detergent and it remains on the laundry, it may cause a bad odor.
Rinse the laundry sufficiently in fresh water.
If you spread a powder detergent over the laundry directly, it may result in discoloration.
CAUTION
Make sure to insert it into the detergent compartment.
If the water pressure is low, the detergent may remain in the detergent compartment.
ADDING FABRIC SOFTENER
1. When the proper amount (one time dose) of fabric softener is stored in the softener inlet, it is
automatically added during the last rinse cycle.
2. Do not add detergent, bleach or starch into the softener inlet.
3. Using too much softener may produce unsatisfactory results.
4. Do not open the lid during the Spin cycle. If added too early, its effectiveness will decrease.
5. Do not leave the softener in the softener dispenser for a long time as it may congeal.
If the water pressure is low, the fabric softener may remain in the softener compartment. In
this case, put the fabric softener into the tub directly.
installation & maintenance_17
F500S_W3050_WA10F5_GOOD-03273M-02_EN(FA)
24/02/2014
03 INSTALLATION & MAINTENANCE
1. Don’t exceed more than 3 m when the
drain hose is used by connecting with
other hoses.
WATER SUPPLY CONNECTOR FILTER
1. Pull out the filter and wash well.
2. Pull in the filter and connect the hose to the inlet water valve
tightly.
3. Check if there is a leakage.
Note to tighten up the connector.
CLEANING THE FILTER
Clean the filter net often to keep the washer clean.
1. Push the upper part of the Hygiene filter
and pull in.
2. Open the cover as shown in the figure.
3. Clean the Hygiene filter.
4. Close the cover and insert the lower part of
the filter in the basket first and then push
the filter with “click” sound.
CLEANING THE PUMP FILTER (OPTION)
1. Place a rag or towel under the wash filter to avoid wetting the floor, and rotate the filter counterclockwise
and pull it out.
2. Remove any dirt from the filter.
3. Return the filter to its place by rotating the filter clockwise until it locks into position.
1
2
3
CLEANING THE DETERGENT COMPARTMENT
1. Separate the detergent compartment from the washer.
2. Separate and clean the Rinse-Cap from the detergent compartment.
3. Assemble the Rinse-Cap and insert the detergent compartment into the washer.
18_installation & maintenance
F500S_W3050_WA10F5_GOOD-03273M-02_EN(FA)
24/02/2014
troubleshooting
PROBLEM
Washing machine won’t work
CHECK
Is the water tap opened?
Is the washer plugged in?
Is the power cut off?
Is there enough water?
Water dose not drain
•
•
•
•
Is the drain hose down?(No pump)
Is the drain hose frozen?
Is the drain hose clogged?
If the water dose not drain in 30 minutes, a buzzer will sound, and the
remaining time indicator will show “5E”.
Water is not supplied
•
•
•
•
•
Spinning does not work
•
•
Is the water tap opened?
Is the water cut off?
Is the water supply hose or hose connection clogged?
Is the water tap frozen?
If the water supply is not finished in 1 hour or there is no change in
the water level 5 minutes (10minutes for some models) after the water
supply has started, the buzzer rings and “4E” is displayed on the
remaining time indicator.
Is the laundry spread out evenly in the washer?
In the washer set on a sturdy flat surface?
Water is overflowed
•
•
Restart after spinning.
If the error sign still indicates, call agency.
This indicates that a Child Lock •
error occurred
•
•
Water leakage error
•
•
•
The error message blinks at a 1 second interval and the water is
drained with an alarm sound.
(Displayed message: “CL” or “dE”)
This function is to prevent children from drowning when falling into
the wash tub. When draining is complete and you turn the power off
and then on, the washing machine will operate normally.
To clear “CL” display, after draining is complete, close the door of
the washing machine, turn the power off and then on.
Check if the end of the drain hose is placed on the floor. (The hose
should be hung over the pump - hose guide.)
Check if the drain hose is clogged by any foreign substances.
If the error remains, call the service center.
troubleshooting _19
F500S_W3050_WA10F5_GOOD-03273M-02_EN(FA)
24/02/2014
04 TROUBLESHOOTING
•
•
•
•
washing machine won’t work?
PROBLEM
CHECK
The power is cut off.
Is the electric voltage normal?
Is the washer plugged in? Plug in the electric cord.
 Water does not drain.
Is the drain hose down? Put the drain hose down.
Is the drain hose folded? Unfold the drain hose.
Is the drain hose outlet clogged? Remove the waste cleanly.
Washing machine won’t work.
Is the washer lid open?
 Close the lid.
Is the Pause button on?
 Press the Start/Pause button one more time and check if the
washer starts.
Is enough water filled to the water level?
 If the water pressure is low, it takes a long time to start
washing.
Is the faucet closed?
 Open the faucet to supply water.
If the drain hose and spin basket are
frozen, do as follows.
•
•
•
•
Add hot water to the frozen water tap and remove the drain
hose. Soak into hot water.
Pour hot water into the spin basket for about 10 minutes.
Put a hot water towel on the drain hose connector.
If the drain hose defrosts, connect again and check for proper
water draining.
The water drains out immediately.
•
The water leaks at the water supply
hose connector.
If the faucet connecting part is loose, water may leak.
 Repeat the assembling steps again. (Refer to “Connecting the
water supply hose”)
The drain is clogged with coins or pins. The drain hose is
hung over the drain hose hook. Half fill the spin basket with
water and try for spinning again.
Check if the rubber packing of water supply hose is in the right
position.
 Screw tightly again.
Is the water supply hose folded?
 Unfold the hose.
If the water supply is too strong, water may leak.
 Close the faucet a little.
Is water leaking from the faucet itself?
 Fix the faucet. Water is not supplied.
20_washing machine won’t work?
F500S_W3050_WA10F5_GOOD-03273M-02_EN(FA)
24/02/2014
washing machine won’t work?
PROBLEM
CHECK
When no water is extracted.
Did you press the Start/Pause button after selecting the water
supply?
 If the Start/Pause button is not pressed, water is not
supplied. Press the Start/Pause button.
Is the filter net at the water supply hose connector clogged with
dirty matters?
 Clean the filter net by brushing with a toothbrush.
Is the water supply cut off?
 If the water supply is suspended, turn off the faucet and
power off.
Spinning makes loud noises and
vibrations.
Check if the laundry is spread evenly in the washer.
 Spread out the laundry evenly and start again.
Check if the washing machine levels on a sturdy flat floor.
 Set the machine at level.
Is the handle for leveling legs loose?
 Adjust the legs on the feet for leveling.
Is around the washing machine filled with unnecessary stuffs?
 Remove those unnecessary things away from the wash machine.
specification _21
F500S_W3050_WA10F5_GOOD-03273M-02_EN(FA)
24/02/2014
05 WASHING MACHINE WON’T WORK?
Is the faucet closed?
 Turn on the faucet.
specification
WA90F5S2, WA11F5S2, WA13F5S2
MAX. MASS OF DRY
CLOTH IN kg
POWER
CONSUMPTION
WA90F5S2
9.0 kg
WA11F5S2
11.0 kg
WA13F5S2
13.0 kg
WASH
480 W
SPIN
280 W
DIMENSIONS(mm)
WEIGHT
WATER PRESSURE
WASHING TYPE
STANDARD
WATER
LEVEL
W 610 x L 670 x H 983
(LOW BASE)
W 610 x L 670 x H 1003
(HIGH BASE)
41 kg
0.05~0.78 Mpa
(0.5 ~ 8.0 kg·f/cm2)
WATER
USAGE
SPIN SPEED
5
87 ℓ
4
65 ℓ
3
51 ℓ
2
44 ℓ
1
34 ℓ
146 ℓ
700 rpm
Stirring Type
22_specification
F500S_W3050_WA10F5_GOOD-03273M-02_EN(FA)
24/02/2014
memo
F500S_W3050_WA10F5_GOOD-03273M-02_EN(FA)
24/02/2014
QUESTIONS OR COMMENTS?
Country
CALL
OR VISIT US ONLINE AT
SOUTH AFRICA
0860-SAMSUNG(726-7864)
www.samsung.com/support
NIGERIA
0800-726-7864
www.samsung.com/africa_en/support
Code No. DC68-03273M-02_EN
F500S_W3050_WA10F5_GOOD-03273M-02_EN(FA)
24/02/2014
Download PDF