LG LH-C6231
LH-C6231W NA2ALLS
@ La
DVD/CD/VCR RECEIVER
Home Cinema System
OWNER’S MANUAL
MODEL: LH-C6231
(Main Unit: LH-C6231W
Speakers: LHS-C6231T, LHS-C6231W)
DIGITAL
DVD OSE dise MP3 ETS
VIDE o” DIGITAL VIDED) + DIGITAL AUDIO CD- R/RW SURROUND
DX] [powey] Surround Kodak (mA
DIGITAL PICTURE CD | ndows
[cae LI Sound COMPATIBLE Rie
VHS
PAL
Before connecting up, operating or repairing this product,
please read this Instruction booklet carefully and completely.
Safety Precautions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to
the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation mark within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the instructions accompanying the
product,
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR
MOISTURE.
WARNING: Do not install this equipment in a confined space
such as a book case or similar unit.
CLASS 1 LASER PRODUCT
KLASSE 1 LASER APPARAT
CLASSE 1 PRODUIT LASER
CAUTION:
This DVD/CD/YWCR receiver employs a Laser System.
To ensure proper use of this product, please read this owners
manual carefully and retain it for future reference. Should the
unit require maintenance, contact an authorized service loca-
tion (see service procedure).
Performing controls, adjustments, or carrying out procedures
other than those specified herein may result in hazardous radi-
ation exposure.
To prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with liquids, such
as vases, should be placed on the apparatus.
COTES ON COPYRIGHTS:
It is forbidden by law to copy. broadcast. show, broadcast
via cable, play in public, or rent copyrighted material without
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on some
discs. When recording and playing the pictures of these discs
on a VCR, picture noise will appear.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection tech-
nology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
SERIAL NUMBER: The serial number is located on the back
of this unit. This number is unique to this unit and not available
to others. You should record requested information here and
retain this guide as a permanent record of your purchase.
Model No.
Serial No.
Table of Contents
Introduction
Safety Precautions ........_...ee.-—e-eees0somn. 2
Table of Contents .......e...—_—-—ee_resmreseroo 3
BeforeUse ............ ccna, 4-5
Elayable DISCS. ica cnn WARNEN Fa HAN a 4
Precautions .. 112200044444 4 a 4 a RIA 5
Notes un DISCS! "acces ca muecas due EAN ws 5
ADDUESYMBOIS: KR SE WS Gs GE e 5
Front Panel Controls. ....................... 6
Display Window Indicators... ................. 7
Remote Control Buttons ...............eec... 8
Rear Panel Connections . . ................... 9
Preparation
Connections ........_ñe2_eeemeceeannose aos 10-14
TV & Set Top Box Connections ............. 10
Accessory Audio/Video (A/V) Connections to
DVD/CD/VVCR receiver .............—...e o.. 11
Radio Aerial Connections . .. ............... 11
Speaker System Connection ............... 12
Speaker Positioning.................eÑe2... 13
Mini Glossary. .............. ui... 14
Before Operation - VCR part .............. 15-19
Videochannel Set ....................... 15
Using your receiver for the very first time ...... 15
How to use the main menu ................ 16
Tuning in TV stations Automatically .......... 16
Tuning in TV stations Manually. . ............ 17
Changing the order of TV stations ........... 18
Deleting IV stations... .... :u00 2 meta à 18
Setting the clock Manually ................. 19
To set the colour system .................. 19
Before Operation - DVD part .............. 20-23
General Explanation. .............—_ eee... 20
On-Screen Display. ... co. owns con severas 20
Initial Settings. =. seæce ses run sous 21-23
e General Operation. ................... 21
e Language. .: cuz ua Ga ve 21
e Picture. ............— 2... esrera. 21
eSpeakersetup....................... 22
e Others (DRC/Vocal/PBC/Auto play) . ...... 22
e Parental Control. . . ................... 23
Operation
Operation with Tape... .................. 24-27
Playing a t8pe 0 == sen sme oni TENEN | 24
e CM (Commercial Message) SKIP. ........ 24
e OPR (Optimum Picture Response). ....... 24
Instant Timer Recording (ITR) .............. 25
Timer recording using On Screen Display . . . 26-27
Operation with DVD and Video CD .......... 28-30
Playing a DVD and Video CD. . . . ........... 28
General Feafures.. ... rua sua mr. emana » 28
e Moving to another TITLE ............... 28
e Moving to another CHAPTER/TRACK ..... 28
O CACA. esa ca us RAE SAA A E | 28
e Still Picture and Frame-by-Frame Playback . 29
8 SOW MOTION... «on res mazo era CEA + 29
e HePeaL ¿sua cra ma mea SÁ TENEN | 29
e RepeatA-B ......................... 29
8 TIMe.Search « cox cos amu SAA LN NENA | 29
e: 3D:5UrroUnd:; ca Lis vues cu DEE 29
8 ZOOM, comin ws rios KUNG FE KL | 30
& Marker Search... es EEE EC KOT | 30
Special DVD Features. . . ....................
a Title Menus: 7 Da SEN danse cs 9
8 DNEC:MeAU:.. «0 emos cus sommes wos HE
à Camera Angle : : 5500 5x pouvant vos is
e Changing the Audio Language...........
e Changing the Audio Channel ............
a: Subtitles” -:: :4- mazo sun AE ES A
Operation with Audio CD and MP3/WMA Discs ...
Playing an Audio CD and MP3/WMA Discs .......
Notes on MP3/WMARecordings. . ..............
a Pase: обо сил ВЫ Su A Pat 0 BE
e Moving to another Track ...............
e Repeat Track/All/Off...................
BREACH i pun EEN Ca WE Da HA
eRepeatAB .............. BE
e 3D Surround ......... 2... 1 040
e Changing the Audio Channel ............
Operation with JPEG Disc ..................
Programmed Playback .....................
Programmed Playback with Audio CD
and MP3/WMADISCS . aa aa 34
Programmed Playback with Video CD .......... 34
e Repeat Programmed Tracks ............ 34
e Erasing a Track from Programme list... . .. 34
e Erasing the Complete Programme list ..... 34
Speaker Setup .......__.-—e-ec_c_ez_ecsrrresrroo 35
Additional Information ..................... 35
Additional Operation - VCR part ........... 36-37
On-Screen DISPl >: ies ZW WA svn as 36
Tape Counter Memory Stop ........... o... 36
Friendly User Guide (Video Doctor) .......... 36
ez (easy) Rebeal::= ua SS GEA Es 5 36
Hi-Fi Stereo Sound System ................ 37
Special Recording. ................... 0. 38
Copying from DVD to VCR... ............... 38
Recording from another video recorder ....... 38
RadioOperation........................ 39-40
Presetting the Radio Stations. .............. 39
Listening 10 Me Hadlo «con can vanessa son an 39
To Clear the Stored Radio Stations .......... 39
Tuning into a Station Manually .............. 40
Tuning into a Station Automatically... 0.0.0000 40
Reference
Language Code List ............. cc... 41
Country Code List. ........... coin. 42
Troubleshooting. . ............... 0... 43-44
Specifications........22200200 00000000 eue 0 45-46
About the symbols for instructions
Indicates hazards likely to cause harm to the unit
itself or other material damage.
Indicates special operating features of this unit.
Indicates tips and hints for making the task easier.
Before Use
Playable Discs
Disc-related terms
DVD
vibes (8 cm / 12 cm disc)
SB Video CD (VCD)
Mist (8 cm / 12 cm disc)
Audio CD
DTA AUGID (8 cm / 12 cm disc)
In addition, this unit can play a SVCD, DVD-RW,
DVD+RW, Kodak PICTURE CD and CD-R or CD-RW
that contains audio titles, MP3, WMA or JPEG files.
otes
— Depending on the conditions of the recording equip-
ment or the CD-R/RW (or DVD-RW, DVD+RW) disc
itself, some CD-R/RW (or DVD-RW, DVD+RW) discs
cannot be played on the unit.
— Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
— Do not use irregularly shaped CDs (e.g., heart-shaped
or octagonal). It may result in malfunctions.
E lotes on DVDs and Video CDs
Some playback operations of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
disc content designed by the software manufacturer,
some playback features of the unit may not be available
or other functions may be added.
Make sure to also refer to the instructions supplied with
the DVDs and Video CDs. Some DVDs made for busi-
ness purposes may not be able to be played on the
unit.
Regional code of the DVD/CD/VCR receiver and
DVDs
This DVD/CD/VCR receiver is designed and
manufactured for playback of region “4” encoded
DVD software. The region code on the labels of
some DVDs indicates which type of player can
play those discs. This unit can only play DVDs labeled
“4” or "ALL". If you try to play any other discs, the mes-
sage “Check Regional Code” will appear on the TV
screen. Some DVDs that have no region code label may
still be subject to area restrictions and therefore not
playable.
Title (DVD only)
The main film content or accompanying feature content
or additional feature content, or music album.
Each title is assigned a title reference number enabling
you to locate it easily.
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chap-
ters. Each chapter is assigned a chapter number,
enabling you to locate the chapter you want. Depending
on the disc, chapters may not be recorded.
Track (Video CD and audio CD only)
Sections of a picture or a musical piece on a video CD
or an audio CD. Each track is assigned a track number,
enabling you to locate the track you want.
Scene
On a video CD with PBC (Playback control) functions,
moving pictures and still pictures are divided into sec-
tions called “Scenes”. Each scene is displayed in the
menu screen and assigned a scene number, enabling
you to locate the scene you want.
A scene is composed of one or several tracks.
Types of video CDs
There are two types of video CDs:
Video CDs equipped with PBC (Version 2.0)
PBC (Playback control) functions allow you to interact
with the system via menus, search functions, or other
typical computer-like operations. Moreover, still pictures
of high resolution can be played if they are included in
the disc,
Video CDs not equipped with PBC (Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
“Before Use (Continued)
Precautions
Handling the unit
When shipping the unit
The original shipping carton and packing materials may
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
When setting up the unit
The picture and sound of a nearby TV, VCR, or radio
may be disturbed during playback. In this case, position
the unit away from the TV, VCR, or radio, or turn off the
unit after removing the disc.
To keep the exterior surfaces clean
Do not use volatile liquids, such as insecticide spray,
near the unit. Do not leave rubber or plastic products in
contact with the unit for a long period of time. They will
leave marks on the surface.
Cleaning the unit
To clean the cabinet
Use a soft, dry cloth. If the surfaces are extremely dirty,
use a soft cloth lightly moistened with a mild detergent
solution. Do not use strong solvents such as alcohol,
benzene, or thinner, as these might damage the surface
of the unit.
To obtain a clear picture
The DVD/CD/VCR receiver is a high-tech, precision
device. If the optical pick-up lens and disc drive parts
are dirty or worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
Notes on Discs
Disc Handling
Do not touch the playback side of the disc.
Hold the disc by the edges so that fingerprints will not
get on the surface.
Do not stick paper or tape on the disc.
Storing discs
After playing, store the disc in its case.
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
light, as there may be a considerable temperature
increase inside the car.
Cleaning discs
Fingerprints and dust on the disc can distort the picture
or reduce sound quality. Before playing, clean the disc
with a clean cloth. Wipe the disc from the centre out-
wards.
O X
Do not use strong solvents such as alcohol, benzene,
thinner, commercially available cleaners, or anti-static
spray intended for vinyl records,
About Symbols
About the © symbol display
“ © ” may appear on the TV screen during operation.
This icon means the function explained in this owner's
manual is not available on that specific DVD video disc.
About the disc symbols for instructions
A section whose title has one of the following symbol is
applicable only to the disc represented by the symbol.
DVD
Video CDs with the PBC (playback control)
function
Video CDs without the PBC (playback control)
function
Audio CDs.
CIED MP3 disc
WMA disc
JPEG disc
Setting the Output Source
You must select one of your output sources (DVD or
VCR) to view on the screen.
- If vou want to view output source of DVD deck:
Press DVD on the remote or DVD/VCR on the front panel
until DVD indicator on the front panel lights and output
source of DVD deck is viewed on the TV screen.
- If you want to view output source of VCR deck:
Press VCR on the remote or DVD/VCR on the front panel
until VCR indicator on the front panel lights and output
source of VCR deck is viewed on the TV screen.
Front Panel Controls
OPEN/CLOSE (4)
Opens or closes the disc tray.
Remote Sensor
Point the DVD/CD/VCH receiver
remote control here,
Disc Tray (DVD deck)
Insert a disc here.
COPY/MEMORY
Press to copy a DVD in the DVD
deck to a VHS tape in the VCR
deck.
Enter a radio stations frequency
into the tuner,
FM/AM
To change between AM and
FM bands.
EJECT(&)
Ejects the tape in the VCR deck.
PAUSE/STEP(IVIID)
Pause playback of a tape or a disc in the DVD or
VCR deck temporarily.
Press repeatedly for frame-by-frame playback.
STOP (IM)
Stops playback of a disc or
tape.
PLAY (»)
To play back a recorded tape or disc.
Cassette Compartment
(VCR deck)
Insert a video cassette here.
| 5 || | =
© |
JJ
В,
т
(О
+
С
=== |
a
=
©
ji
TV/Monitor, Another VCR).
STANDBY/ON indicator
Display window
Indicates the active deck.
Select one of your output sources to view
on the TV screen between DVD and VCR.
PROG/TUNING (V/A)
To scan up or down through memorized channels or
to control tracking during playing back a tape (VCR mode).
To tune in the desired station (Radio Mode).
To record normally or to activate Instant Timer Recording.
AV3((VIDEO IN/AUDIO IN(Left/Right))
Connect the audio/video output of an external source (Audio system,
DVD: Go to beginning of current chapter/track or to previous
chapter/track. Press and hold for two seconds for a fast reverse
VCR: Rewinds the tape during the STOP mode or for fast reverse picture
DVD: Go to NEXT chapter/track. Press and hold for two seconds for a fast
VCR: Advances the tape during the STOP mode or for fast
Switches the DVD/CD/VCR receiver ON and OFF. counterclockwise to decrease the volume.
DVD/VCR indicator
DVD/VCR (output select)
REC/ITR (@)
Reverse SKIP/SCAN (44 <<)
search.
search,
Forward SKIP/SCAN (PD)
forward search.
forward picture search.
VOLUME Control
Turn the knob clockwise to increase volume,
WMA disc inserted
radio mode,
Indicates current
surround mode,
Indicates current A disc is loaded in the DVD deck. (Lights when a disc is
audio stream. loaded in the DVD deck.)
DVD/CD/VCR receiver is in VCR timer recording
Indicates the unit is mode or a VCR timer recording is programmed.
DVD to VCR copy is in progress.
DVD/CD/VCR receiver is Recording a tape.
Indicates the unit is
playing back a tape
recorded in Hi-Fi.
MUTE indicator
Programmed A cassette
playback active is loaded
in the VCR
deck.
+
Conan ons LPROG chk =» (9 E E Hi-Fi pa
Pom [wmA BADIQ.i DVD DEE. ао EEE SE NN 7
PHOTO VCD MP3 TY mae aerea EE EN na = EEE EEE. EU EEE a ОКИ" MHz 1
ST [RPT ALL AB . kHz |
Indicates current chapter,
track number or
channel number.
Indicates the unit is TV mode.
MP3 disc inserted.
Repeat playback
mode indicators.
VCD disc inserted.
DVD disc inserted.
Lights up when a stereo broadcast
is being received in radio mode.
JPEG disc inserted.
Total playing time/Elapsed time/
Frequency/remaining time/ Current
deck status/Surround mode/Volume
etc. indicators.
Remote Control Buttons
FM/AM Tuner select button
Select the DVDICDACR receiver's tuner as the
listening choice. (FM and AM bands)
OPEN/CLOSE, EJECT (&)
- Opens and closes the disc tray.
- Ejects the tape in the VCR deck.
CD/DVD/VCR select buttons
Select the output source (CD/DVD or
VCR) to view on the TV screen.
0-9 numerical buttons
Selects numbered options in a menu.
ANGLE
Selects a DVD camera angle if
available.
PROGRAM
Accesses or removes Program menu.
ZOOM
Enlarges DVD video image.
MARKER
Marks any point during playback.
SEARCH
Displays MARKER SEARCH menu.
DISPLAY, CLK/CNT
Accesses On-Screen display.
Switches among the clock, tape counter
and tape remaining modes on the display.
4/»/A/Y (left/right/up/down)
= Selects an option in the menu.
- PRTRK/PRESET(A/Y):
Select programme of VCR or Tuner
Adjusts manually the tape's picture
onscreen.
= TUNING (</>):
To tune in the desired radio
PEEL SAB
station.
RETURN ==
Removes the setup menu.
CM sue”
Fast forwards picture search through 30
seconds of recording.
STOP (H)
Stops playback.
REC/ITR (@)
Records normally or activates Instant
Timer Recording.
NEN
REPEAT A-B/SPEED/REPEAT
- Repeat chapter, track, title, all.
- ez (easy) repeat (see page 36.)
- Repeats sequence.
- Selects recording speed.
TV/VCR
To view channels selected by the VCR
tuner or by the TV tuner.
ote
This remote control use the same buttons for VCR and DVD functions (ex. PLAY).
To use the VCR, first press the VCR button.
To use the DVD, first press the CD/DVD button.
@
POWER
Switches DVD/CD/NVCR receiver ON and
OFF,
AV SELECT
Select input source.
MUTE
Momentarily silence the speaker of the
DVD/CD/VCR receiver.
SOUND MODE
Selects sound mode between BYPASS,
PRO LOGIC, PRO LOGICIT (MOVIE,
MUSIC, MATRIX) and 3D SURROUND.
CLEAR
Removes a track number on the
program menu or a mark on the
MARKER SEARCH menu.
Press to clear preset stations from the
tuner memory.
AUDIO
Selects an audio language (DVD) or an
audio channel (CD).
e SUBTITLE
Selects a subtitle language.
e TITLE
Displays the disc's Title menu, if
available.
e AV
Selects the VCR deck's source
(Tuner, AV1, AV2 or AV3).
e VOLUME (+/-)
Adjusts speaker volume.
| SETUPA
Accesses or removes DVD setup menu
and VCR menu.
MEMORY/OK/ENTER
- Enter a radio stations frequency into
the tuner.
- Displays functions on the TV screen.
- Acknowledges menu selection.
DISC MENU
Accesses menu on a DVD disc.
« PAUSE/STEP (1111)
Pause playback or recording
temporarily/press repeatedly for
|
=
frame-by-frame playback.
o PLAY (B=)
Starts playback.
«BACKWARD (ld)
DVD: Search backward*/go to begin-
ning of current chapter or track or go to
previous chapter or track.
VCR: Rewinds the tape in STOP mode
or for fast reverse picture search.
* Press and hold button for about two
seconds.
+ FORWARD (Pil)
DVD: Search forward*/go to next
chapter or track.
VCR: Advances the tape in STOP
mode or for fast forward picture search.
* Press and hold button for about two
seconds.
Rear Panel Connections
S-VIDEO OUT (DVD OUT) EURO AV2 AUDIO/VIDEO (VCR IN+OUT/DVD OUT)
Connect to a S-Video Input on TV. Connect to Set Top Box or another video recorder.
FOR DVD VIEWING ONLY.
SPEAKER CONNECTORS AC Power Cord
Connect the six supplied speakers to Plug into the power source.
these terminals.
N 1
AM —— Jr TES EES ES
сло 0000000000000 —
| Fret Wen 000700000000 a — =
O O 000000000000 — |
LANTENNA | у
EURO AV1 AUDIO/VIDEO (VCR IN+OUT/DVD OUT)
Connect to your TV set or another video recorder.
RF. OUT
Connect to a TV with RF cable.
AERIAL
Connect the aerial using this jack.
FM ANTENNA CONNECTOR
Connect the FM antenna to this terminal.
AM ANTENNA CONNECTORS
Connect the AM antenna to this terminal.
A
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
Remote Control Operation Range Remote control battery installation
Detach the battery cover on the rear of
the remote control, and insert two ВОЗ
(size AAA) batteries with @ and @
aligned correctly.
Point the remote control at the remote sensor and press
the buttons.
e Distance: About 6m (20ft) from the front of the
remote sensor
e Angle: About 30° in each direction of the front of the A
remote sensor Caution
Do not mix old and new batteries. Never mix different
types of batteries (standard, alkaline, etc.).
vv
“Connections
TV & Set Top Box (or another VCR Connections)
Rear of Set Top Box (or another VCR)
Rear of TV
e Make one of the following connections, depending on
the capabilities of your existing equipment.
En ips
e Depending on your TV and other equipment you wish
to connect, there are various ways you could connect
the DVD/CD/VCR receiver. Use one of the connec-
tions described below.
e Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
best connections.
Caution
— Make sure the DVD/CD/VCR receiver is connected
directly to the TV. Select the correct AV input on your
TV.
— Do not connect your DVD/CD/VCR receiver to TV via
your VCR. The DVD image could be distorted by the
copy protection system.
Basic connections (AV)
Connect the EURO AV1 AUDIO/VIDEO on the rear
panel of the DVD/CD/VCR receiver to the RCA input
jacks on the TV using a RCA-SCART lead (E).
You can connect such a Set Top Box (or another
VCR) to the DVD/CD/VCR receiver using a RCA-
SCART lead (D).
vw
Basic connections (RF)
Connect the aerial cable (A) from your indoor/ out-
door aerial to AERIAL jack on the rear panel of
DVD/CD/VCR receiver.
Connect the supplied RF cable (R) from the
RF. OUT jack on the rear panel of DVD/CD/VCR
receiver to your television's Aerial Input.
S-Video connection
Connect the S-VIDEO OUT jack on the DVD/CD/VCR
receiver to the S-VIDEO IN jack on the TV using the S-
Video cable (S).
otes
e The signal of S-VIDEO OUT jack will output only
when the function mode is selected to CD/DVD.
e When you connect the DVD/CD/VCR receiver to your
TV, be sure to turn off the power and unplug both
units from the wall outlet before making any connec-
tions.
“Connections
Accessory Audio/Video (A/V) Connections to DVD/CD/VCR receiver
Connect the AV3 jacks on the DVD/CD/VCR receiver to the audio/video out jacks on your accessory component,
using the optional audio/video cables.
Component:
mC
Video Camera,
Satellite Receiver,
Laser Disc Player
Jack panel of Accessory
Ho|-0-of
Radio Aerial Connections
Connect the supplied FM/AM aerial for listening to the radio.
e Connect the AM loop aerial to the AM aerial connector,
e Connect he FM wire aerial to the FM aerial connector.
FM Wire aerial (supplied)
ee)
otes
e To prevent noise pickup, keep the AM loop aerial away from the DVD/CD/VCR receiver and other components.
® Be sure to fully extend the FM wire aerial.
e After connecting the FM wire aerial, keep it as horizontal as possible.
Speaker System Connection
Connect the speakers using the supplied speaker cords.
To obtain the best possible surround sound, adjust the speaker parameters; distance, level, etc..
Centre Speaker
Front Speaker Front Speaker
{Right) (Left)
=
00
Subwoofer
Rear Speaker
Rear Speaker
(Right Surround) (Left Surround)
E otes
* Be sure to match the speaker cable to the appropriate terminal on the components: + to + and — to —. If the cables are
reversed, the sound will be distorted and will lack base.
e |f you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the speakers.
® Do not remove the front cover of supplied speaker.
Speaker Positioning
In the case of normal position use the 6 speakers (2 front speakers, centre speaker, 2 rear speakers and
subwoofer).
If you want to play the excellent bass sound, DTS digital surround or Dolby Digital surround, you should connect a
subwoofer,
* Front speakers
According to your listening position set up the speakers for equal distance. And by hearing position set up the
interval between speakers to 45 degree.
+ Centre speaker
The centre speakers and front speakers are ideally the same height. But normally place it above or below the
television.
+ Rear speakers
Place left and right behind the listening area. These speakers recreate sound motion and atmosphere required for
surround sound playback. For best results, do not install the rear speakers too far behind the listening position
and install them at or above the level of the listener's ears. It is also effective to direct the rear speakers towards
a wall or ceiling to further disperse the sound.
In the case of a smaller room size, if the audience is near to the rear wall set the rear speakers opposite each
other, and set the rear speakers above 60 - 90 cm than the listener's ears.
- Subwoofer
This can be placed in any front position.
Subwoofer
X Centre Speaker
Front Speaker £ В Front Speaker
Rear Speaker
(Left)
Rear Speaker
(Right)
Speaker Positioning Example
Mini Glossary
Mini Glossary for Audio Stream &
Surround mode
Allows you to enjoy 5.1{or 6) discrete channels of high quality
digital audio from DTS program sources such as discs, DVD
and compact discs, etc.bearing the trademark. DTS Digital
Surround delivers up to 6 channels of transparent audio(which
means identical to the original masters) and results in excep-
tional clarity throughout a true 360 degree sound field. The
term DTS is a trademark of DTS Technology, LLC.
Manufactured under license from DTS Technology, LLC.
OODIGITAL
The Dolby Digital surround format lets you enjoy up to 5.1
channels of digital surround sound from a Dolby Digital pro-
gram source, If you play DVDs with * MF" mark, you can
enjoy even better sound quality, greater spatial accuracy, and
improved dynamic range.
DOPRO LOGIC
Use this mode when playing movie or Dolby Digital 2 channel
which carnes the “DE” mark, This mode provides the effect
of being in a movie theatre or live concert house-an effect with
an intensity which can only be obtained through DOLBY PRO
LOGIC SURROUND, The effect of the front/back/left/right
movement of the sound image, as well as the sense of fixed
position in the sound image, is much clearer and more dynam-
ic than before,
DOPROLOGIC (II)
Dolby Pro Logic || creates five full-bandwidth output channels
from two-channel sources. This is done using an advanced,
high-purity matrix surround decoder that extracts the spatial
properties of the original recording without adding any new
sounds or tonal colorations.
MOVIE mode:
The Movie mode is for use with stereo television shows and all
programs encoded in Dolby Surround. The result is enhanced
soundfield directionality that approaches the quality of discrete
5.1-channel sound.
MUSIC mode:
The Music mode is for use with any stereo music recordings,
and provides a wide and deep sound space. The Music mode
includes controls that allow the sound to be tailored to individual
listening tastes.
MATRIX mode:
The Matrix mode is the same as the Music mode except that the
directional enhancement logic is turned off. it may be used to
enhance mono signals by making them seem “larger.” The
Matrix mode may also find use in auto systems, where the fluc-
tuations from poor FM stereo reception can otherwise cause dis-
turbing surround signals from a logic decoder. The ultimate
“cure” for poor FM stereo reception may be simply to force the
audio to mono.
3D SURROUND
This unit can produce a 3D Surround effect, using 3D Surround
Sound technology, which simulates multi-channel audio play-
back from two conventional stereo speakers instead of the five
or more speakers normally required to listen to multi-channel
audio from a home theatre. This feature works with DVD discs
encoded with Dolby Pro Logic and Dolby Digital audio tracks.
DD
BYPASS
Software with multichannel surround audio signals is played
according to the way it was recorded.
Sound Mode
You can enjoy surround sound simply by selecting one
of the pre-programmed sound fields according to the
program you want to listen to.
Press SOUND MODE repeatedly until the sound mode
you want appears in the display window as below.
Each time you press SOUND MODE button, the sound
mode is changed in the following order;
PRO LOGIC — PLIL MOVIE — PLIT MUSIC — PLIL MATRIX —
3D SURROUND — BYPASS
When DVD is inserted.
You can change the stream of DVD (Dolby Digital, DTS, PCM,
etc) by pressing the AUDIO button on the remote during play-
back.
Although the DVD contents differ from disc to disc, the follow-
ing explains the basic operation when this feature is used.
Each time you press AUDIO button, the sound mode of DVD is
changed as the following order;
DODIGITAL — ей — DODIGITAL
For your reference
« The DVD/CD/VCR Receiver memorizes the last
mode
settings for each source individually.
- You can identify the encoding format of program
software by looking at its packaging.
- Dolby Digital discs are labeled with the ms logo.
- Dolby Surround encoded programs are labeled with
the logo.
- DTS Digital Surround discs are marked with DTS.
ote
® When you play sound tracks with 96kHz sampling frequen-
cy, the output signals will be converted to 48kHz (sampling
frequency).
Before Operation - VCR part
Video channel Set
Video channel (RF output channel) is the channel on
which your TV receives picture and sound signals from
the DVD/CD/VCR receiver through the RF cable.
If you have used a RCA-SCART lead you will not have
to tune your TV, simply select the AV channel. The AV
channel is already pre-tuned for optimum video play-
back on your TV.
Perform the following steps only if interference appears
in the TV picture after you have moved to a different
area or a new station has started broadcasting in your
area, or if you change the connection from RF connec-
tion to AV connection, or vise versa,
1 Turn on DVD/CD/VCR receiver and TV.
2 Set the vacant position 68 on your TV.
Press POWER on the remote control to enter
the standby mode (the clock indicator will be
dimmed).
Press and hold PROG A or Y on the
DVD/CD/VCR receiver for more than 4 secs.
RF 68 will appear in the DVD/CD/VCR receiver display.
The following picture will be displayed on the TV
screen.
Po RF CHANNEL _ _ 88
o
If the picture is snowy, move to step 5. If the picture
is clean, press POWER on the DVD/CD/VCR
receiver to finish.
Press PROG A or Y on the DVD/CD/VCR receiv-
er to set the video channel to a vacant position
between 28 and 68 which is not occupied by
any local station in your area.
ote
The RF channel will not change until step 6 has been
executed.
Press POWER on the DVD/CD/VCR receiver to
store the new RF video channel into the
DVD/CD/VCR receiver memory.
Now tune your TV set to the new DVD+VCR RF
channel.
E ote
If the TV picture was clear in step 4, do not retune your
TV.
Using your Receiver for the very first time
For the following steps we assume that you have just
connected your Receiver for the very first time.
To make tuning TV stations an easy task your Receiver
incorporates the Automatic Channel Memory System
(ACMS). This system will automatically tune and store
TV channels in your Receiver.
Make sure that you have correctly installed your
DVD/CD/VCR receiver.
Press POWER to turn on your DVD/CD/VCR
receiver.
If the initial Menu Screen doesn't appear on screen,
make sure that you have tuned your TV to a video
channel. Or if this is correct it may mean that your
DVD/CD/VCR receiver is already tuned.
J Press OK to start the automatic tuning process.
ón Coz 00 PR-01
oz co 00 PR-D2
o3 Cod oo PR-05
= НИ 1e
E в
Press i to remove the menus from the TV
Screen.
Before Operation - VCR part
How to use the main menu
This DVD/CD/VCR receiver can easily be programmed
by using the menus displayed on screen.
The menus are controlled from the Remote Control
Handset,
Switch on your TV set and DVD/CD/VCR recei-
ver by pressing the POWER.
Press i.
The main menu will appear on the TV screen.
ETE
e REC
Timer recording setting (see p. 26-27).
e PR SET
Manual tuning setting (see p. 17).
e ACMS
ACMS (Automatic Channel Memory System) (see
right column).
e TIME DATE
Date á clock setting (see p. 19).
e SYSTEM
To set the Colour TV System (see p. 19).
e ABC OSD
To change the language setting for OSD.
You can select the language from English, Russian,
German, French, Polish, Czech and Hungarian.
e Dr.
To check a problem with your DVD/CD/VCR receiver
(see p. 36).
e fOSD ON/OFF
To display the operational mode of your
DVD/CD/VCR receiver (see p. 36).
e OPR
To improve the playback picture (see p. 24).
J Press < ог № to select the desired menu.
4 Press OK and press 4 or Y to select.
5 Press i to return to a TV picture.
Tuning in TV Stations Automatically
Should you wish to perform the Automatic Channel
Memory System (ACMS) again please follow the guid-
ance given on this page. You may tune up to 99 TV
stations into your DVD/CD/VCR receiver.
Press POWER to turn on your DVD/CD/VCR
receiver.
Press i.
The main menu will appear on the TV screen.
3 Press À or № 10 select ACMS and press OK.
ACS
= £38
Press OK again to start the automatic tuning
process.
о coz 00 PR-01
02 Coz оо РА-02
03 Coa 00 PR-03
5 meu" E
E п
03 co 00 PR-03
04 сов Do PR-04
05 Cos 00 PA-D6
06 cor 00 PR-d6
or сов oo PRA-D7
08 Cos oo PA-DE
A eE
REET pe ee E, PACIEN
Press i to remove the menus from the TV
screen.
Before Operation - VCR part
Tuning in TV Stations Manually Searching will stop when it locates a station.
Control the fine tuning of the station by pressing A
In certain areas of the country broadcast signals may or Y.
be too weak for your DVD/CD/VCR receiver's automatic
tuning process to find or assign TV stations correctly.
You must tune in these weaker broadcast stations man-
ually in order for your DVD/CD/VCR receiver to store PR CH MFT STATION
them. ww EE
+ CHANMEL/CABLE : AV
Press i. REET Baton
The main menu will appear on the TV screen.
2 Press 4 or P to select PR SET and press OK. 6 Press > to select STATION and press OK.
PR CH MFT STATION
vu Eu Tan
CHANNEL/CABLE : AV +
+ een ЕТ onza
Press À or Y to select letters and numbers for
= Y la 2
Press i and press A or Y to select the pro the new station name.
gramme number that you want to tune (for
example, PR 07). Press OK. Press 4 or P to move back and forth between
characters. Press OK.
Di Co oo PR-01
02 co 00 PR-02
03 co oO PR-03
0 Cos oo PR-04
eo о de prié PR CH MET STATION
07 coz 304
De = Ea votes
+
E taa +
RSET eos
po cw wT STATION 8 Press i, confirm the station placement.
oF C-- qe Ere
+ CHANNEL CABLE - AV
RSET nance
Press AV to select C (Standard stations) or S
(Cable stations): C02 - C70, S01 - S41.
Enter the channel number of station that you want
to tune with the numerical buttons.
Press i to remove the menus from the TV
screen.
Your new TV station has now been tuned into your
ar Tn DVD/CD/VCR receiver.
+ mas. If you wish to manually tune other stations repeat
RSET Danco stages 1 - 8.
Before Operation - VCR part
Changing the order of TV Stations
After tuning TV stations into your DVD/CD/VCR receiver
you may wish to change the order in which they are
stored without having to retune them. The instructions
given on this page will show you how you can simply
move them into your desired order
Press i.
The main menu will appear on the TV screen.
Press 4 or P to select PR SET and press OK.
PR CH MFT STATION
o 00
* CHANNEL/CABLE : AV
RSET Sueca
Press i.
Press A or Y to select the programme number
you want to move (for example, PR 03).
Press >,
om coz 00 PR-01
02 cos 00 PR-02
Ds 04 и 11e
04 cos 00 PR-04
as cos 00 РА-05
DE Cor 00 PR-D6
or cos oo PR-07
Da Con 00 PR-Da
+
FSET Mogan
Press A or Y to select the programme number
you want to move to (for example, PR 05).
о1 Coz Do PR-01
02 cos 00 PR-02
os cos 00 PR-04
04 Cos 00 PR-05
05 Cod 00 ane
DE Cor 00 PR-06
07 Coa oo PROF
DE cos oo PR-08
A
Ese CCE
4 Press OK.
The selected programme will be moved to the new
programme number.
o
Dz
Coz oa
cos 00
os cos 00 PR-04
i coB 00
+ a
Р.
ESET DELETE : El LIER
Press i to remove the menus from the TV
screen.
If you wish to move other TV stations repeat stages
1-4.
vv
Deleting TV Stations
After tuning TV stations into your DVD/CD/VCR receiver
you may wish to delete a station.
The instructions given on this page will show you how
to easily delete any unwanted TV stations.
Press i.
The main menu will appear on the TV screen.
Press < or P to select PR SET and press OK.
PR CH МЕТ STATION
o 00
+ CHANNEL /CABLE : AV
RSET DUO
Press i.
Press A or ¥ to select the programme number
you want to delete (for example, PR 03).
Press <.
After a short while, the selected station will be
deleted.
Press i to remove the menus from the TV
screen.
If you wish to delete other TV stations repeat
stages 1 - 3.
How to select Stored TV stations:
Stored TV stations can be selected in either of two
ways.
Press A or Y to select different stations that are
tuned into your DVD/CD/VCR receiver,
You may also directly select stations using the
numerical buttons on the remote control.
Before Operation - VCR part
Setting the Clock Manually
Press i.
Foon < or P to select TIME DATE and press
Use the numerical buttons or press A/Y or >
on the remote control to alter the HOURS, MIN-
UTES, DAY, MONTH and YEAR.
Please note your DVD/CD/VCR receiver uses a 24-
hour clock. e.g. 1pm will be displayed as 13:00.
The day of the week will appear automatically when
you enter the year.
HH MM DO MM YY
11:45 1 , 01 . Wwe
id РЫСИ
If you make a mistake, press € or P and enter
the correct details.
Press i to remove the menus from the TV
screen.
Your new clock settings are stored and will appear
on your DVD/CD/VCR receiver's Display.
To set the colour system
Your DVD/CD/VCR receiver is equipped with dual
colour standard, you can play back a tape in PAL and
MESECAM.
During playback your DVD/CD/VCR receiver detects the
colour system automatically.
If there is any colour problem please select the colour
system manually.
Press i.
The main menu will appear on the TV screen.
2 Press < or P to select the SYSTEM.
ena:
не ес
Press OK and press A or Y to select according
to the COLOUR system used.
AUTO:
Allows PAL or MESECAM signals to be distinguished
automatically.
PAL:
Use when receiving PAL signals or use when playing
back a tape recorded in PAL system.
MESECAM:
Use when receiving MESECAM signals or use when
playing back a tape recorded in MESECAM system.
Press < or P to select the RF AUDIO and press
A or Y to select according to the RF AUDIO
used.
Press i to remove the menus from the TV
screen.
Before Operation - DVD part
General Explanation
This manual gives basic instructions for operating the
DVD/CD/VCR receiver. Some DVDs require specific
Press 4» to change the setting of an item.
The number buttons can be also be used for setting
operation or allow only limited operation during play-
back. When this occurs, the symbol 6) appears on the
TV screen, indicating that the operation is not permitted
by the DVD/CD/VCR receiver or is not available on the
disc.
On-Screen Display
General playback status can be displayed on the TV
screen. Some items can be changed on the menu.
On-screen display operation
1 Press DISPLAY during playback.
Press A/V to select an item.
The selected item will be highlighted.
numbers (e.g., title number). For some functions,
press ENTER to execute the setting.
Temporary Feedback Field Icons
2 = | Repeat Title
3 carr| Repeat Chapter
7 max | Repeat Track (non-PBC Video CDs only)
9 м | Repeat All Tracks (non-PBC Video CDs only)
4 as | Repeat A-B
9 = | Repeat Off
mue Resume play from this point
O. Action prohibited or not available
a
otes
e Some discs may not provide all of the features on the
on-screen display example shown below.
e |f no button is pressed for 10 seconds, the on-screen
display disappears.
DVD
items Function (Press 4/Y to select desired item) Selection Method
Title Number Shows the current title number and total number of 4 /P or
Ez 1/3 titles, and skips to the desired title number. Numbers, ENTER
Chapter Number Shows the current chapter number and total number of 4 /p or
Time search
chapters, and skips to the desired chapter number.
Shows the elapsed playing time, and
searches the point directly from the elapsed time.
Numbers, ENTER
Numbers, ENTER
Audio language 1 ENG Shows the current audio soundtrack language, « /> о
and Digital Audio Wwe on encoding method, and channel number, and AUDIO
Qutput mode 5.1 CH changes the setting.
Subtitle language E) OFF Shows the current subtitles language, and <P. or
changes the setting. SUBTITLE
Angle él A Shows the current angle number and total number of < /P.or
angles, and changes the angle number. ANGLE
Sound Shows the current sound mode, and < /P.or
© ByPass changes the setting. SOUND MODE
items
Function (Press A/V to select desired item)
Selection Method
Track Number
Time
Shows the current track number, total number of tracks
and PBC On mode, and skips to the desired track number.
Shows the elapsed playing time (Display only)
<d /P.or
Numbers, ENTER
Audio Channel
Shows the audio channel, and
: 4 /P,or
yo STER changes the audio channel. AUDIO
Sound ‚© BYPASS Shows the current sound mode, and 4 /P.or
changes the setting. SOUND MODE
Initial Settings
You can set your own Personal Preferences on the
DVD/CD/VCR receiver.
General Operation
Press SETUP.
The setup menu appears.
Disc Audio | Y Original
© Disc Subtitle English
— DiscMenu: French
Rating German
J Country Code Spanish
> TV Aspect | Halian
=] Menu Lang: sage Chinese
i E. Polish
= Hungarian
a 5: Speaker Set Other ————
Press A/V to select the desired item.
The screen will show the current setting for the
selected item, as well as alternate setting(s).
While the desired item is selected, press >, then
A/V to select the desired setting.
Press ENTER to confirm your selection.
Some items require additional steps.
Press SETUP, RETURN, or PLAY to exit the
setup menu.
Language
Disc Language
Select a language for the disc's Menu, Audio, and
Subtitle.
Original : The original language set for the disc is selected.
Other : To select another language, press number buttons to
enter the corresponding 4-digit number according to the lan-
guage code list on page 41. If you enter the wrong language
code, press CLEAR.
Disc Audio _ Y Original
Disc Subtitle English
‘Disc Menu French
— Rating German
J Country Code Spanish
TV Aspect | Malian
Polish
Lo Hungarian
— 5.1 Speaker Setup Other — — — —
Menu Language
Select a language for the setup menu. This is the menu
you see when you press SETUP.
— Disc Audio Y English
© Disc Subtitle Spanish
e Rating German
ft vr о
Picture
TV Aspect
4:3 Letterbox: Select when a standard 4:3 TV is con-
nected. Displays theatrical images with masking bars
above and below the picture.
4:3 Panscan: Select when a conventional TV set is
connected. The video material formatted in the Pan &
Scan style is played back in that style (Both sides of the
picture are cut off).
16:9 Wide: Select when a 16:9 wide TV is connected.
Disc Audio 4:3 Letterbox
© Disc Subtitle 4:3 Panscan
Disc Manu —| Y16:9 Wide
| Райт)
Sain a mh
TV Aspect
[E] Menu Language |
Before Operation - DVD part (Continued)
Speaker setup
5.1 Speaker settings
Select speaker settings, including volume balance and
delay time, or test the speaker settings.
Speaker settings are only active on the Analog Multi-
Channel Output. (See "Speaker Setup”, page 35.)
Disc Audio
vo Ll]
© Dise Subtitle Я ай
pete |) DA E
Rating Front L
a Country Code Volume 0 dB
> Tv Aspect =" Size Small
=] Menu Language Distance ift
La Test
rr: Return
a's 5.1 Speaker Setup
Others
The DRC, Vocal, PBC and Auto Play settings can be
changed.
e Press AW to select the desired item and press
ENTER. The setting of the selected item is changed
between On and Off,
Disc Audio DRC on
© Disc Subtitle Vocal on
Dise Menu РВС Оп
— Rating Auto Play off
3 Country Code
TV Aspect
[NE | Menu Language
Ta a sta Ema no
Dynamic Range Control (DRC)
With the DVD format, you can hear a program's sound-
track in the most accurate and realistic presentation
possible, thanks to digital audio technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the quietest ones). Then, you may listen to a movie
at a lower volume without losing clarity of sound. Set
DRC to On for this effect.
Vocal
Set Vocal to On only when a multi-channel karaoke
DVD is playing. The karaoke channels on the disc will
mix into normal stereo sound.
PBC
Set Playback Control (PBC) to On or Off.
On: Video CDs with PBC are played according to the PBC.
Off: Video CDs with PBC are played the same way as Audio
CDs.
Dv
Auto Play
You can set up the DVD/CD/VCR receiver so a DVD
disc automatically starts playing whenever the DVD is
inserted.
If Auto Play mode is set to On, this DVD/CD/VCR
receiver will search a title that playback time is longest
and then play back the title automatically.
On: Auto Play function is activated.
Off: Auto Play function is not activated.
ote
The Auto Play function may not work for some DVDs.
Before Operation - DVD part (Continued)
Parental Control
Rating
Movies on DVDs may contain scenes not suitable for
children. Therefore, discs may contain Parental Control
information that applies to the complete disc or to
certain scenes on the disc. These scenes are rated
from 1 to 8, and alternatively, more suitable scenes are
available for selection on some discs. Ratings are
country-dependent. The Parental Control feature allows
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Disc Audio
“En Disc Subtitle
Disc Menu’
— Ratin
J Country Code
TV Aspect
= Menu Language
= В ©) Es NOE Y 5
— Ш Ш “| #Unioek
ss 51 Speaker Setup
Others
Change
Select “Rating” on the Setup menu using the
A/V buttons.
2 While “Rating” is selected, press №.
When you have not entered a password.
Enter a 4-digit password using the number buttons
to create a personal 4-digit security password. then
press ENTER. Enter the 4-digit password again and
press ENTER to verify.
When you have already registered a password;
Enter a 4-digit password using the numbered but-
tons to confirm the personal 4-digit security pass-
word, then press ENTER.
If you make a mistake before pressing ENTER, press
CLEAR and enter 4-digit security password again.
4 Select a rating from 1 to 8 using the 4/Y but-
tons. One (1) has the least playback restrictions.
Eight (8) has the most playback restrictions.
Unlock: If you select Unlock, Parental Control is
not active. The disc will play in full.
Ratings 1 to 8: Some discs contain scenes not
suitable for children. If you set a rating for the play-
er, all disc scenes with the same rating or lower will
be played. Higher rated scenes will not be played
unless an alternative scene is available on the disc.
The afternative must have the same rating or a
lower one. If no suitable alternative is found, play-
back will stop. You must enter the 4-digit password
or change the rating level in order to play the disc.
Press ENTER to confirm your rating selection,
then press SETUP to exit the menu.
ote
This function may not work for some DVDs.
Country Code
Enter the code of a country/area whose standards were
used to rate the DVD video disc, referring to the list
(See “Country Code List’, page 42).
Disc Audio Code Set
@ Disc Subtitie AU
3 Country Code
Ш | Menu Language
Ft
“— 5.1 Speaker Setup
“Others
Select Country Code using the 4/Y buttons on
the setup menu.
2 While Country Code is selected, press >.
3 Follow step 3 of “Rating” on left.
4 Select the first character using the 4/Y buttons.
Shift the cursor using > button and select the
second character using 4/Y buttons.
Press ENTER to confirm your country code
selection, then press SETUP to exit the menu.
ote
Confirmation of the 4-digit password is necessary when
the code is changed (see “Changing the 4-digit code”
below.).
Changing the 4-digit code
1 Follow Steps 1-2 as shown above to the left (Rating).
2 Enter the old code, then press ENTER.
3 Select Change using 4/Y buttons then press
ENTER.
4 Enter the new 4-digit code, then press ENTER.
5 Enter exactly the same code a second time and veri-
fy by pressing ENTER.
6 Press SETUP to exit the menu.
If you forget your 4-digit code
If you forget your password, to clear the current pass-
word, follow the procedure below. (in the NO DISC
mode.)
1 Press SETUP to display the setup menu.
2 Use the Number buttons to enter the 6-digit number
"210499".
The 4-digit password is cleared.
3 Enter a new code as shown above to the left
(Rating).
Operation with tape
Playing a tape
You will only be able to load and eject video cassettes
when your DVD/CD/VCR receiver is plugged into the
mains.
Your DVD/CD/VCR receiver may also play back record-
ings from NTSC tapes (on PAL TV).
Getting a better picture
When a cassette is inserted and playback started, the
automatic tracking function works to get the best possi-
ble picture automatically. If the quality of the recording is
poor, repeatedly press either PR/TRK (&A/¥) on the
remote control or PROG/ TUNING (A/V) on the front
panel to manually adjust the tracking until any distor-
tions have been removed. Press numbered button 0 on
the remote control to switch automatic tracking back on
again.
1 Make sure that you have correctly connected
your DVD/CD/VCR receiver as described earlier
in this book.
Turn on your TV.
Press POWER to turn on your DVD/CD/VCR
receiver.
Insert the video cassette into your DVD/CD/VCR
receiver.
The video cassette should have the window side
facing up and the arrow facing away from you.
2 Press PLAY (I=) to start playing your tape.
If you load a video cassette which has had its
record protection tab removed, playback of the
cassette will start automatically.
AUTO TRACKING
Your DVD/CD/VCR receiver will automatically
adjust the tracking to give the best picture quality.
J Press PAUSE/STEP (II) to still a picture.
Press PAUSE/STEP (II) repeatedly to advance
the tape frame by frame.
If you press FORWARD, the picture will be slowed
down at about 1/19 times the normal playback.
Tapes can be paused for up to 5 minutes. After 5
minutes your receiver will stop the tape to prevent
from damage to the tape or your receiver.
Still picture quality can be improved slightly by
pressing PR/TRK (A/¥) on the remote control.
4 Press PLAY (>) to continue playing your tape.
Picture search:
During playback press either FORWARD or BACK-
WARD. This will enable you to rapidly wind the tape
(7 times normal playback) while seeing where you
are on the tape.
Logic search:
During fast forward or rewind press and hold FOR-
WARD or BACKWARD. The picture will be played
back at 7 times normal playback speed.
w
During playback or still picture press < ог №.
You can reach the following playback speeds.
(-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay,
7xplay)
To switch off the slow motion and shuttle, press the
desired function.
During slow motion and shuttle, the noise bars may
appear on the picture according to the status of
tape.
If distortions can be seen in the picture, reduce
them with PR/TRK (4/Y) on the remote control.
Press STOP (IM) to end playback.
Press EJECT.
If the end of the tape is reached, your DVD/CD/
VCR receiver will stop playback automatically,
rewind, stop at the top of the tape, eject the tape
then power off.
CM (Commercial Message) Skip:
When playing back tapes, this feature lets you skip
through commercial breaks by fast-forwarding, and
then resume normal playback.
While tape is playing press CM SKIP on the remote
control to skip commercial (or other programme
material).
Repeatedly press CM SKIP to skip:
The tape will fast forward picture search through 30
seconds of recording for each press of the button.
1 Press 30 seconds
2 Presses 60 seconds
3 Presses 90 seconds
4 Presses 120 seconds
5 Presses 150 seconds
6 Presses 180 seconds
OPR (Optimum Picture Response):
This feature automatically improves playback picture
quality by adjusting your DVD/CD/VCR receiver to the
condition of the tape.
1 Press i.
2 Press < ог № to select OPR and press OK.
Press A or Y repeatedly to select: OFF, SOFT
or SHARP.
Please note you may set OPR only when playing back
a tape.
Press i to remove the menus from the TV
screen.
О p eration with tape
The DVD/CD/VCR receiver allows you to make record-
ings using a variety of simple methods:
Instant Timer Recording (ITR): Starts recording imme-
diately for a set period of time or until the video cassette
runs out.
Timer Recording: You may record at a later time (up to
1 month from the present). Up to 7 of these
automatic recordings may be set.
The DVD/CD/VCR receiver incorporates Long Play (LP)
which enables you to record up to twice the amount of
time on a video cassette. For example an E-180 will
record up to 180 minutes using Standard Play (SP);
using LP you will be able to record up to 360 minutes.
Please note there will be a slight loss in picture and
sound quality when using LP.
Instant Timer Recording (ITR)
Make sure that you have correctly connected
your DVD/CD/VCR receiver as described earlier
in this book.
Press POWER to turn on your DVD/CD/VCR
receiver.
Insert a video cassette with protection tab into
your DVD/CD/VCR receiver.
The video cassette should have the window side
facing up and the arrow facing away from you.
Press PRITRK (A/V) to select the programme
number you wish to record.
You may also directly select programme numbers
using the numerical buttons on the remote con-
trol.
If you wish to record directly from either of the
SCART sockets or AV3 sockets, repeatedly
press AV until the socket you wish to record
from is displayed.
AV 1 for recording from EURO AV1 socket on the
rear of your DVD/CD/VCR receiver.
AV 2 for recording from EURO AV2 socket on the
rear of your DVD/CD/VCR receiver.
AV 3 for recording from AV3 sockets on the front of
your DVD/CD/VCR receiver.
Press SPEED if you wish to record in Long Play
or Standard Play.
SP will produce improved picture and sound quality,
however LP will provide twice as much recording
time as SP.
Press REC/ITR (@) to start recording.
RECORD will appear on the TV screen.
Press REC/ITR several times, Each successive
press will increase the record time by 30 minutes
until you reach a maximum of 9 hours.
/ Press PAUSE/STEP (II) to avoid recording
unwanted scenes.
Press PAUSE/STEP (II) to continue recording.
If you press PAUSE/STEP (EI) during ITR, the
DvD/CD/VCR receiver will enter the record pause
mode and ITR is cancelled.
Tapes can be paused for up to 5 minutes; RECP
will be displayed when a tape is paused. After 5
minutes your DVD/CD/VCR receiver will stop
recording to prevent damaging the tape or your
DVD/CD/VCR receiver.
Press STOP (IM) twice within 5 seconds to end
recording. Press EJECT (4).
EJECT will appear on the TV screen for a few
seconds.
otes
e If you do not wish to record on a tape (this can hap-
pen quite easily by accident!) remove the protection
tab on the back edge of the video cassette.
e |t is possible to record on a video cassette with the
record protection tab removed by covering the hole
with self adhesive tape.
e Remember you can record one programme while
watching another by starting your instant recording,
pressing TV/VCR to appear TV indicator in the
display window and then selecting a different channel
on your TY.
Operation with tape
Timer recording using On Screen
Display
You may set up to seven timer record events within one
month of the current date.
PLEASE NOTE! before setting the timer make sure
that you have set the DVD/CD/VCR receiver clock
correctly and you know which channels on your
DVD/CD/VCR receiver you have tuned to TV
stations.
In a stage 4, if you want to record from either of the
SCART sockets or AV3 on the front, press AV.
Insert a video cassette with protection tab into
your DVD/CD/VCR receiver.
The video cassette should have the window side
facing up and the arrow facing away from you.
Press i.
Press << or P to select REC and press OK.
If all timer record events are full press A or Y to
select the event that you wish to remove and
replace.
Press « to delete the event.
PR DATE TIME
J Press OK to start setting the timer record event.
Press the numerical buttons to enter the station
that you wish to record.
When selecting stations 1 - 9, press 0 first, then the chan-
nel number; for example Stations 3 - 03. You may also
select Channels by pressing A or Y.
If you want to record from either of the SCART sockets or
AV INPUT on the front, repeatedly press AV for the
correct display (AV1, AV2 or AV3).
Once selected press >.
PR DATE TIME
Si 5 НН sp
mm = = т. = SP
ai sp
me sp
ram mE. SP
ai sp
m OES]
Press the numerical buttons to enter the date of
the programme.
4844264
If you press OK before entering the date you may
select one of the following automated
recording features. Press 4 or P to select, then
press OK to confirm.
DLY To record every day (except Saturday and
Sunday) at the same time.
Weekly To record at the same time every week.
PR DATE TIME
PROS == | =е:ееносос:гсс
= sp
== == sms mmm iE. SP
CE sumo TU WE TH FR SA
С
Press the numerical buttons to enter the record-
ing start and end times of the programme that
you wish to record.
Please note your DVD/CD/VCR receiver uses a 24-
hour clock. e.g. 1pm will be displayed as 13:00.
You may also select the start and end times by
pressing A or Y.
PR DATE TIME
Press p to select the recording speed and
press A or Y if you wish to record in IP or LP.
Intelligent LP Recordin
When you set the tape speed to “IP”, the DVD/CD/
VCR receiver automatically switches to LP mode to
allow complete recording if there is not enough tape
to record the entire programme while timer- record-
ing in SP mode.
Check that the timer event details are correct.
Press i to save your settings.
If PLEASE CHECK is displayed, you have entered
data incorrectly and will need to re-enter the data.
PR DATE TIME
UL m
Press i to remove the menus.
If you want to make other timer recordings repeat
stages 2 - 8.
Press POWER to switch your DVD/CD/VCR
receiver to Standby.
© will appear in the DVD/CD/VCR receiver's dis-
play while your DVD/CD/VCR receiver waits to
make the recording.
If the DVD/CD/VCR receiver is DVD mode, even with the
DVD/CD/VCR receiver Is power on, it will record any timer pro-
gramme.
To stop the timer recording, press POWER twice.
If Timer record events Overlap...
Do not overlap programmes, since overlapping portions
of the conflicting programmes will not be recorded.
Earlier recording times have priority over later recording
times as shown in the diagram.
Example:
Programme 1 will be recorded in its entirety, but only
the last 30 minutes of Programme 2 will be recorded.
PROGRAMME 1
16:00 y 17:00
17:30
16:30
PROGRAMME 2
(This portion will not be recorded.)
If two programmed timer recordings overlap at midnight
00:00 a.m., programme 2 will not be recorded.
Change (Deleting) the Timer Programme
If at a later date you wish to delete or change any of
the settings in timer event memory you may do so with-
out having to enter all the timer event information again.
Simply display the timer event screen. Press A or ¥ to
select the event that you wish to delete or change.
Press « to delete the event...or
Press OK to change, then press « or P- to select;
Station, Date, Start and End times and LP.
Press A or Y to enter the correct information.
“Operation with DVD and Video CD
Playing a DVD and Video CD
Ed playback Setup
e Turn on the TV and select the video input source con-
nected to the DVD/CD/VCR receiver,
e Audio system: Turn on the audio system and select
the input source connected to the DVD/CD/VCR
receiver.
1 Press OPEN/CLOSE to open the disc tray.
Load your chosen disc in the tray, with the
playback side facing down.
Press OPEN/CLOSE to close the tray.
READING appears on the TV screen, and playback
starts automatically. If playback does not start,
press PLAY.
In some cases, the disc menu might appear
instead.
Edis a menu screen is displayed
The menu screen may be displayed first after loading a
DVD or Video CD which offers a menu.
DVD
Use the 4 PAY buttons to select the title/chapter you
want to view, then press ENTER to start playback.
Press TITLE or DISC MENU to return to the menu
screen.
e Use the number buttons to select the track you want
to view.
Press RETURN to return to the menu screen.
e Menu setting and the exact operating procedures for
using the menu may differ depending on the disc.
Follow the instructions on the each menu screen.
You also may set PBC to Off under setup. See page
22.
otes
e |f Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit code must
be entered and/or the disc must be authorized (see
“Parental Control”, on page 23).
e DVDs may have a region code.
Your DVD/CD/VCR receiver will not play discs that
have a regional code different from your receiver. The
regional code for this receiver is 4 (four).
General Features
EM ote
Unless stated otherwise, all operations described use
the remote control. Some features may also be
available on the Setup menu.
Moving to another TITLE
@ 1 |
When a disc has more than one title, you can move to
another title as follows:
e Press DISPLAY, then press the appropriate number
button (0-9) to select a title number.
e Press 4 P to select a title, then press ENTER.
Moving to another CHAPTER/TRACK
an | @ 18 |
When a title on a disc has more than one chapter or a
disc has more than one track, you can move to another
chapter/track as follows:
e Press 4d or PP briefly during playback to return to
the beginning of the current chapter/track or to select
the next chapter/track.
e Press 4d twice briefly to step back to the previous
chapter/track.
e To go directly to any chapter during DVD playback,
press DISPLAY. Then, press A to select the
chapter/track icon. Then, enter the chapter/track
number using the numbered buttons (0-9) or press 4
№ to select the chapter/track, then press ENTER.
otes
e For two-digit numbers, press the numbered buttons
(0-9)in rapid succession.
e Ona Video CD with PBC, you must set PBC to Off on the
setup menu to use the Repeat function. See page 22.
Search
1 Press and hold 1494 or PP for about two seconds
during playback.
The receiver will now go into SEARCH mode,
2 Press and hold l4« or PP repeatedly to select the
required speed: 44X2, €4dX4, 44X16, <4X100
(backward) or [-PX2, ХА, > X16, M>X100 (for-
ward).
With a Video CD, the Search speed changes: 44X2,
«4 X4, AXE, (backward) or P>X2, P>X4, M>XG,
(forward).
3 To return to normal play, press PLAY.
Operation with DVD and Video CD
General Features (continued) Repeat A-B
Still Picture and Frame-by-Frame Playback * *- | 9] 9
To repeat a sequence in a title;
1 Press PAUSE/STEP during playback. 1 Press REPEAT A-B at your chosen starting point.
The DVD/CD/VCR receiver will now go into PAUSE “ A* " appears briefly on the TV screen.
mode. 2 Press REPEAT A-B again at your chosen end point.
2 You can advance the picture frame-by-frame by “A B” appears briefly on the TV screen, and the repeat
pressing PAUSE/STEP repeatedly on the remote sequence begins (* A==B" appears the display window).
control. 3 To cancel the sequence, press REPEAT A-B.
3 To return to normal play, press PLAY.
Time Search @ 0200| Y |
The Time Search function allows you to start playing at
Slow Motion
1 Press PAUSE/STEP (II) during playback. any chosen time on the disc.
The DVD/CD/VCR receiver will now go into PAUSE 1 Press DISPLAY during playback. The on-screen
mode. display appears on the screen.
2 Press BACKWARD (ht) or FORWARD (1) The Time Search box shows the elapsed playing time of the
during pause mode. current disc.
The DVD/CD/VCR receiver will enter SLOW mode. 2 Within 10 seconds, press 4/Y to select the Time
3 Use BACKWARD (14) or FORWARD (1) to Search icon in the on-screen display.
select the required speed: dl 1/16, 41 1/8, dl 1/4, «l The “-:--:--" appears in the Time Search box.
= so or I» 1/16, I> 1/8, I» 1/4, I» 1/2 3 Within 10 seconds, use the number buttons to enter
(forward). the required start time. Enter hours, minutes, and
4 To return to playback, press FLAY (>). seconds from left to right in the box.
If you enter the wrong numbers, press CLEAR to remove the
lote numbers you entered. Then enter the correct numbers.
4 Within 10 seconds, press ENTER or press PLAY to
confirm the start time.
Playback starts from the selected time on the disc. If you enter
an invalid time, playback will continue from the current point.
3D Surround
‚® svenss | ‚© зовив |
Slow motion playback in reverse is not applicable for
Video CD,
Repeat
2 caer | a me | 9 rack | 9 ALL | 2 or |
DVD Video Discs - Repeat Chapter/Title/Off
5 This unit can produce a 3D Surround effect, which
1 rhe the. curTenty Rey Ing Caper press simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five or
more speakers normally required to listen to
SERA mé multi-channel audio from a home theater system.
The Repeat Title icon appears on the TV screen. 1 itn UND MODE to select "3D SUR" during
8 et Зее Ea pleas Herz Ta third me: 2 To turn off the 3D Surround effect, press SOUND
Р RE | MODE again to select “BYPASS”.
The Repeat Chapter icon appears on the TY screen.
2 To repeat the title currently playing, press REPEAT a
Video CDs - Repeat Track/All/Off
1 To repeat the track currently playing, press REPEAT.
The Repeat Track icon appears on the TV screen.
2 To repeat the disc currently playing, press REPEAT a
second time,
The Repeat All icon appears on the TV screen.
3 To exit Repeat mode, press REPEAT a third time.
The Repeat Off icon appears on the TV screen.
ote
On a Video CD with PBC, you must set PBC to Off on the
setup menu to use the Repeat function. See page 22.
“Operation with DVD and Video CD
General Features (continued)
Zoom
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 Press ZOOM during playback or still playback to
activate the Zoom function.
If you press ZOOM repeatedly, the magnification level
increases up to six steps.
2 Use the 4 PAY buttons to move through the zoomed
picture.
3 Press CLEAR to resume normal playback or return to
the paused image.
ote
e The Zoom function may not work for some DVDs.
Marker Search
You can start playback from a memorized point. Up to
nine points can be memorized.
To enter a mark, follow these steps.
1 During disc playback, press MARKER when
playback reaches the spot that you want to
memorize,
The Marker icon will appear on the TV screen briefly.
2 Repeat step 1 to enter up to nine Marker points on a
disc.
To Recall a Marked Scene
1 During disc playback, press SEARCH.
The MARKER SEARCH menu will appear on the screen.
2 Within 10 seconds, press 4» or use the number
buttons to select a Marker number that you want to
recall.
3 Press ENTER.
Playback will start from the Marked scene.
4 To remove the MARKER SEARCH menu, press
SEARCH.
To clear a Marked Scene
1 During disc playback, press SEARCH.
The MARKER SEARCH menu will appear on the screen.
2 Press 4 to select the Marker number that you want
to erase.
3 Press CLEAR.
The Marker number will be erased from the list.
4 Repeat steps 2 and 3 to erase additional Marker
numbers.
5 To remove the MARKER SEARCH menu, press
SEARCH.
Special DVD Features
Checking the contents of DVD Video
discs: Menus
DVDs may offer menus that allow you to access special
features. To use the disc menu, press MENU. Then,
press the appropriate number button to select an option.
Or, use the 4 PAY buttons to highlight your selection,
then press ENTER.
Title Menu
1 Press TITLE.
If the current title has a menu, the menu will appear on the
screen, Otherwise, the disc menu may appear.
2 The menu can list camera angles, spoken language
and subtitle options, and chapters for the title.
3 To remove the title menu, press TITLE again.
Disc Menu
1 Press DISC MENU,
The disc menu is displayed.
2 To remove the disc menu or to return to play, press
DISC MENU again.
Camera Angle tn |
If the disc contains scenes recorded at different camera
angles, you can change to a different camera angle
during playback.
e Press ANGLE repeatedly during playback to select a
desired angle.
The number of the current angle appears on the TV screen,
Changing the Audio Language OD 2.
Press AUDIO repeatedly during playback to hear a dif-
ferent audio language or audio track.
Changing the Audio Channel
Press AUDIO repeatedly during playback to hear a dif-
ferent audio channel (STER., LEFT or RIGHT).
Subtitles e no |
Press SUBTITLE repeatedly during playback to see the
different subtitle languages.
ote
If & appears, the feature is not available on the disc.
yeration with Audio CD and |
Playing an Audio CD and MP3AWMA Discs
CD CD OD
The DVD/CD/VCR receiver can play MP3/WMA format-
ted recordings on CD-ROM, CD-R or CD-RW discs.
Before playing MP3/WMA recordings, read the notes on
MP3 Recordings on right.
an
Insert a disc and close the tray.
Audio CD; Audio CD menu appears on the TV
screen go to step 4.
MP3/WMA disc; The MP3/WMA-JPEG choice
menu appears on the TV screen. Go to step 2
ДЭ НРЗЛУМА
DES
Press A/V to select the MP3/WMA then press
ENTER or PLAY.
The MP3/WMA menu appears on the TV screen,
Press RETURN to move to the MP3/WMA-JPEG
choice menu.
Press A/V to select a folder, and ENTER or PLAY.
A list of files in the folder appears.
Press A/V to select a track then press PLAY or
ENTER.
Playback starts.
During playback, the current track's elapsed playing
time will appear on the display window and menu.
Playback will stop at the end of the disc.
Press TITLE to move to the next page.
Press DISC MENU to move to the previous page.
Audio CD menu MP3/WMA menu
TR
If you are in a file list and want to return to the Folder
list, use the A to highlight =- and press ENTER to
return to the previous menu screen.
5 To stop playback at any other time, press STOP.
Notes on MP3/WMA Recordings
About MP3
e An MP3 file is audio data compressed by using the
MPEG1 audio layer-3 file-coding scheme. We call
files that have the ". mp3" file extension “MP3 files”.
e The player can not read an MP3 file that has a file
extension other than “.mp3”.
About WMA(Window Media Audio)
e An WMA file is a Microsoft audio compression
technology.
e WMA(Windows Media Audio) offers double the audio
compression of the MP3 format.
MP3/WMA Disc compatibility with this DVD/CD
receiver is limited as follows:
1. Sampling Frequency / only at 44. 1kHz (MP3),
22.05 - 44 1kHz (WMA)
2. Bit rate / within 32 - 320kbps (MP3),
32 - 128kbps (WMA)
3. CD-R physical format should be “ISO 9660"
4. If you record MP3/WMA files using the software
which cannot create a FILE SYSTEM, for example
“Direct-CD” etc., it is impossible to playback
MP3/WMA files. We recommend that you use
“Easy-CD Creator”, which creates an 1509660 file
system.
5. Asingle session disc requires MP3/WMA files in the
first track. If there is no MP3/WMA file in the 1st
track, it cannot playback MP3/WMA files. If you wish
to playback MP3/WMA files, format all the data in
the disc or use a new one,
6. File names should be named using 8 letters or less
and must incorporate “. mp3” or “wma” extension
e.g. irks MP3 or ticked x WMA!
Do not use special letters such as / : * ? “<> etc.
Total number of files on the disc should be less than
650.
ON
This DVD/CD/VCR receiver requires discs/recordings to
meet certain technical standards in order to achieve
optimal playback quality. Pre-recorded DVDs are auto-
matically set to these standards. There are many differ-
ent types of recordable disc formats (including CD-R
containing MP3 or WMA files). That require certain pre-
existing conditions (see above) to insure compatible
playback.
Customers should also note that permission is
required in order to download MP3/WMA files and
music from the Internet. Our company has no right
to grant such permission. Permission should
always be sought from the copyright owner.
“Operation with Audio and |
Pause ED CID CID
1 Press PAUSE/STEP during playback.
2 To return to playback, press PLAY, PAUSE/STEP or
ENTER again.
Moving to another Track CD CI CID
e Press |4<4 or > briefly during
playback to return to the beginning of the current
track or to go to the next track.
e Press ld twice briefly to step back to the previous
track.
e In case of audio CD, to go directly to any track, enter
the track number using the numbered buttons (0-9)
during playback.
Repeat Track/AIl/Off D CID CID
1 To repeat the track currently playing, press REPEAT.
The Repeat icon and TRACK” appears on the menu
screen.
2 To repeat all tracks on a disc, press REPEAT a sec-
ond time,
The Repeat icon and "ALL" appears on the menu screen.
3 To cancel Repeat mode, press REPEAT a third time.
The Repeat icon and “OFF” appears on the menu screen.
Search D CD CID
1 Press and hold I< or PP for about
two seconds during playback.
The player will now go into SEARCH mode.
2 Press and hold << or PP repeatedly to select the
required speed: 44X2, 44X4, 4«4X8 (backward) or
PD KX2, > X4, > X8 (forward).
Search speed and direction are indicated on the menu
screen.
3 To return to playback, press PLAY.
Repeat A-B
To repeat a sequence.
1 During disc playback, press REPEAT A-B at your cho-
sen starting point.
The Repeat ¡con and “A* ” appears on the menu screen.
2 Press A-B again at your chosen end point.
The Repeat icon and "A BE" appears on the menu screen,
and the sequence begins to play repeatedly.
3 To exit the sequence and return to normal play, press
A-B again.
The Repeat ¡con and “OFF” appears on the menu screen.
Continued)
3D Surround
This unit can produce a 3D Surround effect, which
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five or
more speakers normally required to listen to multi-
channel audio from a home theater system.
1 Press SOUND MODE to select "3D SUR" during
playback.
2 To turn off the 3D Surround effect, press SOUND
MODE again to select "BYPASS".
Changing the Audio Channel
Press AUDIO repeatedly during playback to hear a
different audio channel (STER., LEFT, or RIGHT).
Viewing a JPEG disc
This DVvD/CD/VCR receiver can play discs with JPEG
files and Kodak picture CD. Before playing JPEG
recordings, read the notes on JPEG Recordings on right.
Insert a disc and close the tray.
The MP3/WMA-JPEG choice menu appears on the
TV screen,
ре
Press A/V to select the JPEG then press
ENTER.
The JPEG menu appears on the TV screen.
||
Ч
Press A/Y to select a folder, and press ENTER or
PLAY.
A list of files in the folder appears.
Press RETURN to move to the MP3/WMA-JPEG
choice menu.
Ed ip
If you are in a file list and want to return to the Folder
list, use the AY buttons on the remote to highlight
“ z-" and press ENTER to return to the
previous menu screen.
If you want to view a particular file, press A/'Y to
highlight a file and press ENTER or PLAY.
Viewing the file proceeding starts.
During viewing a file, press RETURN to move to
the previous menu (JPEG menu).
Press TITLE to move to the next page.
ломка оне отв | [ео чан pres
Press MENU to move to the previous page.
TIR
There are three viewing Slide Speed options: Fast,
Normal, Slow, and Off. Press 4» to highlight the Slide
Speed then press 4/Y to select the option you want to
use, and press ENTER.
To stop viewing at any other time, press STOP.
The JPEG menu appears.
Moving to another File
Press Hd or PI once while viewing a picture to
advance to the next file or to the previous file.
Still Picture
1 Press PAUSE/STEP during slide show.
The DVD/CD/VCR receiver will now go into PAUSE
mode.
2 To return to the slide show, press PLAY or press
PAUSE/STEP again.
To flip the picture
Press AW while showing a picture to flip the picture
horizontally or vertically.
To rotate picture
Press 4» during showing a picture to rotate the
picture clockwise or counterclockwise.
Notes on JPEG Recordings
® Depending upon the size and number of the JPEG
files, it could take a long time for the DVD/CD/VCR
receiver to read the disc's contents. If you don't see
an on-screen display after several minutes, some of
the files are too big — reduce the resolution of the
JPEG files to less than 2 mega pixels and burn anoth-
er disc,
e Total number of files and folders on the disc should
be less than 650,
e Some disc may be incompatible due to different
recording format or condition of disc.
e When you are using software such as “Easy CD
Creator” to burn the jpeg files into the CD-R, ensure
that all the selected files have the “.ipg” extensions
when copying into the CD layout.
e If the files have “.jpe” or “jpeg” extensions, please
rename them as “.ipg” files.
e File names without “.ipg” extension will not be able to
be read by this DVD/CD/VCR receiver. Even though
the files are shown as JPEG image files in windows
explorer.
“Programmed Play
Programmed Playback with Audio CD
and MP3/WMA Discs
The Program function enables you to store your
favourite tracks from any disc in the player memory.
Program can contain 30 tracks.
Press PROGRAM during playback or in the stop
mode to enter the Program Edit mode.
The [El mark will appear to the right of the word Program
on the right side of the menu screen.
E ote
Press PROGRAM to exit the Program Edit mode;
the El mark will disappear.
Select a track, then press ENTER to place the
selected track on the Program list.
Repeat step 2 to place additional tracks on the
Program list.
ов свето sten, of svess
Audio CD menu
ов 90:00 Tra
Do
MP3/WMA menu
Press >,
The programmed track you selected last is highlighted on
the program list.
Press A/V to select the track you want to start
playing.
Press TITLE to move to the next page.
Press MENU to move to the previous page.
Press PLAY or ENTER to start.
Playback begins in the order in which you programmed
the tracks and "PROG." appears on the menu screen.
Playback stops after all of the tracks on the Program list
have played once.
To resume normal playback from programmed
playback, select a track of CD (or MP3/WMA) list
and then press ENTER or PLAY.
"PROG." indicator disappears in the display window.
Programmed Playback with Video CD
Mote
On a Video CD with PBC, you must set PBC to Off on the
setup menu to use the Program function. See page 22.
Program can contain 30 tracks.
1 Insert Video CD and close the tray.
Press PROGRAM while playback is stopped.
The VCD Program menu will appear.
EM ote
Press RETURN, PROGRAM or PLAY to exit the Program
menu.
Follow steps 2-6 of “Programmed Playback with
Audio CD and MP3/WMA disc” on left.
To resume normal playback from
programmed playback, press PROGRAM.
"PROG." indicator disappears in the display window.
Repeat Programmed Tracks
e To repeat the track currently playing, press REPEAT.
The Repeat icon and TRACK” appears on the menu
screen.
e To repeat all tracks on the program list, press
REPEAT a second time.
The Repeat icon and “ALL” appears on the menu screen.
e Tocancel Repeat mode, press REPEAT a third time.
The Repeat icon and "OFF" appears on the menu screen.
Erasing a Track from Programme List
1 Press PROGRAM during playback (Audio CD and
MP3/WMA disc only) or stop to enter the Programme
Edit mode,
The [El mark will appear.
2 Press P to move to the Programme list.
3 Use AW to select the track that you wish to erase
from the Programme list.
4 Press CLEAR.
The track will be erased from the Program list.
Erasing the complete Programme List
1 Follow steps 1-2 of “Erasing a Track from Programme
List’ as above.
2 Use A/V to select “Clear All”, then press ENTER.
The complete Program for the disc will be erased.
The programmes are also cleared when the disc is removed.
Speaker Setup -
Adjust the following settings for the built-in 5.1 channel
surround decoder,
© DiscSubtitie E = El
Disc Menu || De E
Rating Front L
4 Country Code Volume 0dB
TV Aspect — Size Small
IE | Menu Language Distance 1ft
Test
m Return
4 5.1 Speaker Setup
Others 1
Select “5.1 Speaker Setup” using the AV
buttons on the setup menu.
While “5.1 Speaker Setup” is selected, press »
button.
3 Press P buttons to select the desired speaker.
4 Adjust options by using AV P buttons.
Speaker selection
Select a speaker that you want to adjust. ((Front speak-
ers (Left), Front speakers (Right), Centre Speaker, Rear
speakers (Left), Rear speakers (Right), or Subwoofer))
Volume
Press 4 / № to adjust the output level of the selected
speaker. (-6dB - +6dB)
Size
Since the speaker settings are fixed, you cannot change
the settings.
Distance
If you connected speakers to your DVD/CD receiver ,
setting the Distance lets the speakers know how far the
sound has to travel to reach your set listening point.
This allows the sound from each speaker to reach the
listener at the same time. (1 ft = 30.48 cm)
ote
You can not set the distance of subwoofer speaker.
Test
Press ENTER to test the signals of each speaker.
Adjust the volume to match the volume of test signals
memorized in the system.
e Front Left (L) — Centre — Front Right (R) —
Rear Right (R) — Rear Left (L) => Subwoofer
Return
Press ENTER to return to the previous menu.
Additional Information
Last Condition Memory
This DVD/CD/VCR receiver memorizes the user set-
tings for the last disc that you have viewed. Settings
remain in memory even if you remove the disc from the
player or switch off the player. If you load a disc that
has its settings memorized, the latest stop position is
automatically recalled.
otes
— Settings are stored in memory for use any time.
— This player does not memorize settings of a disc if
you switch off the DVD/CD/VCR receiver before com-
mencing to play it.
_Additional Operation - VCR part
On Screen Display
You may easily display the clock or tape counter and
tape remaining, day, month, year, day of week,
programme channel, tape speed and VCR function on
the TV screen,
If a recording is taking place these On Screen Displays
will not be recorded onto the tape.
1 Press CLK/CNT to display.
VCR — 1 Programme
Function Last md Chama
Day/Month/ Clock/Ta
Year/Day of 1.01.03 WED 20 -—— Counter
Week Tape |
remaining
Press CLK/CNT repeatedly to display the tape
counter.
During playback or recording, the tape remaining is
displayed with the tape counter.
After 3 seconds the display will clear from the
TV screen, leaving only the clock or tape count-
er and tape remaining on the TV screen.
Press CLK/CNT again to remove all displays
from the TV screen.
The tape remaining will only be accurate for
E-180 and E-240 tapes.
The tape remaining indicator may not be
accurate, since it depends on the type or condition
of tape used. Also, the tape remaining indicator is
not displayed just after a cassette has been insert-
ed, or after playback or recording has begun.
Tape Counter Memory Stop
The Digital Tape Counter can be displayed on your TV
screen instead of the time by pressing CLK/CNT on the
remote control.
The Digital Tape Counter indicates the relative positions
of recordings on the tape.
Press CLK/CNT repeatedly until the counter is
displayed on the TV screen.
Press CLEAR to set the counter to 0:00:00.
Press PLAY (I>) to start recording.
The tape counter will display the actual play time in
hours, minutes and seconds.
Press STOP when playback or recording is
complete.
Press BACKWARD.
The tape will rewind and automatically stop when
the counter returns to 0:00:00.
Please note: If FORWARD is pressed when
counter mode indicates a negative value, the tape
will not stop.
36 4
Friendly User Guide (Video Doctor)
This feature informs you that there is a problem with
your DVD/CD/VCR receiver. These error messages will
appear on the TV screen.
Press i.
Press < or P to select Dr. and press OK.
=) VIDEO DOCTOR
E HEAD STATUS
TAPE STATUS
MO. OF TIMER PROGRAMME
NEXT TIMER PROGRAMME
ок
pa
2 Press 4 or Y to check a problem.
HEAD STATUS
e PLEASE CLEAN:
Clean your video heads.
TAPE STATUS
® NOT RECORDABLE:
Insert a tape with its protection tab in place
NO. OF TIMER PROGRAMME
e?
Shows the number of timer recording.
NEXT TIMER PROGRAMME
® PR-01 26 10:00-11:00 SP
Shows the current status of timer recording.
Press i to remove the menus from the TV
screen.
ez (easy) Repeat
BY pressing & holding REPEAT during play back, the
holding section is replayed twice automatically.
During play back, press & hold REPEAT at he
point where repeat play is to be concluded.
Then, your DVD/CD/VCR receiver will go into
reverse search.
Release REPEAT at the point where repeat play
is to start.
Holding section is replayed twice automatically.
ote
Pressing REPEAT again during repeat play, the
DVD/CD/VCR receiver will return to normal play.
Hi-Fi Stereo Sound System
Your DVD/CD/VCR receiver will record and play back Hi-Fi stereo sound. This allows you to record and play back
the sound in several different ways. Video cassettes recorded on your DVD/CD/VCR receiver will have a normal
mono audio track and two VHS Hi-Fi stereo audio tracks. These stereo tracks allow you to make audio recordings in
Hi-Fi stereo or bilingual mode from a TV broadcast, stereo audio system, video disc or another Hi-Fi VCR.
1 Your DVD/CD/VCR receiver’s allows you to Press AUDIO repeatedly until the desired audio
enjoy broadcasts with stereo, bilingual and mode appears.
mono sound. o
The choice is STEREO, LEFT (left channel),
The particular type of sound received or that RIGHT (right channel) and MONO.
recorded will be briefly displayed on the TV screen
for a couple of seconds: In BIL playback the primary language is output on
STEREO the left channel and the secondary language is out-
Sound is automatically recorded on the Hi-Fi stereo put simulanEausly from hs Naht Channel wien
; audio output is set to STEREO.
end mono Bass of the video tape, The primary language will be output from both
channels when the audio setting is MONO.
Please note that when adjusting the tracking control
Hi-Fi stereo sound may revert to MONO.
Both audio channels will be recorded on the Hi-Fi
stereo tracks. The primary language channel (left) will
be recorded on the mono track of the video tape.
MONO Press i to return to a TV picture.
The sound is recorded on the Hi-Fi tracks and the
mono track of the video tape without any separation.
STERED
Special Recording
Copying from DVD To VCR
This unit allows you to copy the contents of a DVD to a
VHS tape.
ote
If the DVD you are attempting to copy is copy protected,
you will not be able to copy the disc. It is not permitted
to copy Macrovision encoded DVDs. "LOCK" will blink
on the display window.
Insert Disc.
Insert the disc you wish to copy in the DVD deck
and close the disc tray.
Insert VHS Tape.
Insert a blank VHS video tape into the VCR deck.
Press PLAY (I=) on the DVD deck.
The DVD will go into play mode
e |fthe DVD disc menu appears, you may need to press
the PLAY (I=) manually to begin copying.
Press REC/ITR (8) or press COPY/MEMORY .
The VCR receiver will go into Record mode.
Stop the Copy Process.
When the DVD is finished playing, press STOP (IM)
twice within 5 seconds to end the copy.
You must stop the Copy process manually when the
DVD movie ends, or the unit may replay and record
over and over again.
Recording from another video
recorder
With the DVD/CD/VCR receiver you can make record-
ings from an external source, such as copying from
another VCR or a camcorder.
EM ote
In the following description, this DYVD/CD/VCR receiver
will be one used for recording and other VCR will be
used for playback.
VCR should be connected to the one of the
SCART sockets on the rear panel of your
DVD/CD/VCR receiver or the AV3 sockets on the
front panel of your DVD/CD/VCR receiver.
Press AV until the socket you wish to record
from is displayed.
AV1 Sound and Picture recording using the lower
EURO AV1 socket on the back of your DVD/CD/
VCR receiver.
AV2 Sound and Picture recording using the upper
EURO AV? socket on the back of your DVD/CD/
VCR receiver.
AV3 Sound and Picture recording from AV3 sockets
on the front of your DVD/CD/VCR receiver.
Insert the recorded tape into VCR and a blank
tape into DVD/CD/VCR receiver.
To start recording, press REC/ITR (@) on
DVD/CD/VCR receiver and press PLAY on VCR.
When you want to finish copying, press the
STOP (IN) on both appliances.
Press STOP (IM) twice within 5 seconds at
DVD/CD/VCR receiver.
Rad 10 О peration
Presetting the Radio Stations
You can preset 30 stations for FM and AM. Before tun-
ing, make sure that you have turned down the volume,
Press FM/AM on the remote control or on the
front panel until the frequency band appears on
the display and TV screen.
ВМ 7 |
RADI 04
AM 5e2kH2
EE OK CLEAR
Press AV on the remote control to select your
desired radio channel.
E
| RADIO
HH
FM 108 OOMHZ
RFF ok CLEAR
RADI 06 |
EM LI te |
Press FM/AM on the remote control or on the
front panel to select the desired band.
Hold down Y TUNING 4 on the front panel or
hold down € and P on the remote control for 1
or 2 seconds, and a station is searched for
automatically.
EM 87, 50= |
RADIO 06
FM 87. 50MHZ
EE ok CLEAR
Press MEMORY on the remote control or press
COPY/MEMORY on the front panel.
MEMORY =
6 Repeat steps 2 to 5 to store other stations.
Listening to the Radio
Preset radio stations in the DVD/CD/VCR receiver
memory first (see “Presetting radio stations” on the left).
Press FM/AM on the remote control or on the
front panel until the frequency band appears on
the display and TV screen.
The last received station is tuned in.
Press A/Y on the remote control repeatedly to
select the preset station you want.
Each time you press the button, the DVD+Hi-Fi VCR
tunes in one preset station at a time.
Adjust the volume by rotating VOLUME on the
front panel or by pressing VOLUME + or - on
the remote control repeatedly.
To Clear the Stored Radio Stations
Press FM/AM on the remote control or on the
front panel until the frequency band appears on
the display and TV screen.
Lem CE)
|
FM IC: Ci |
FM 108. 0061HZ
EA OK CLEAR
RADIO. 06 |
Press 4/Y on the remote control to select your
desired station.
| RADIO 1 O=
|
Е
RADIO 10
Abd S522kHZ | a
Ed Mi
ERE OK, CLEAR
Press CLEAR the remote control to clear the
stored radio station.
RADIS 10
FM 87. 50MHZ |
EEE OK, CLEAR
ote
e While record or record pause mode, the CLEAR
function may not be operated.
“Operation with R adio (C ontinued)
Tuning into a Station Manually Mute
и Press MUTE to mute your unit.
Press FM/AM on the remote control or on the You can mute your unit in order, for example, to answer
front panel until the frequency band appears on the telephone, MUTING and MUTE indicator appear in
the display and TV screen. the display.
Press FM/AM on the remote control or on the
front panel to select the desired band.
Press ¥ TUNING A on the front panel or press
4 and P on the remote control to tune in the
desired station.
Tuning into a Station Automatically
Hold down ¥ TUNING A on the front panel or hold
down 4 and P on the remote control for 1 or 2
seconds, and a station is searched for automatically.
ote
e The search may not stop at a station with a very
weak signal.
Language Code List
Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu”
(See page 21).
Code Language Code Language Code Language Code Language
6566 Abkhazian 7074 Fiji 7678 Lingala 8373 Singhalese
6565 Afar 7073 Finnish 7684 Lithuanian 8375 Slovak
6570 Afrikaans 7082 French 7775 Macedonian 8376 Slovenian
8381 Albanian 7089 Frisian 7771 Malagasy 8379 Somali
6577 Ameharic 7176 Galician 7783 Malay 6983 Spanish
6582 Arabic 7565 Georgian 7776 Malayalam 8385 Sudanese
7289 Armenian 6869 German 7784 Maltese 8387 Swahili
6583 Assamese 6976 Greek 7773 Maori 8386 Swedish
6588 Aymara 7576 Greenlandic 7782 Marathi 8476 Tagalog
6590 Azerbaijani 7178 Guarani 7779 Moldavian 8471 — Tajik
6665 Bashkir 7185 Gujarati 7778 Mongolian 8465 Tamil
6985 Basque 7265 Hausa 7865 Nauru 8484 Tatar
6678 Bengali; Bangla 7387 Hebrew 7869 Nepali 8469 Telugu
6890 Bhutani 7273 Hindi 7879 Norwegian 8472 Thai
6672 Bihari 7285 Hungarian 7982 Oriya 6679 Tibetan
6682 Breton 7383 Icelandic 8065 Panjabi 8473 Tigrinya
6671 Bulgarian 7378 Indonesian 8083 Pashto, Pushto 8479 Tonga
7789 Burmese 7365 Interlingua 7065 Persian 8482 Turkish
6669 Byelorussian 7165 Irish 8076 Polish 8475 Turkmen
7577 Cambodian 7384 Italian 8084 Portuguese 83487 Twi
6765 Catalan 7465 Japanese 8185 Quechua 8575 Ukrainian
9072 Chinese 7487 Javanese 8277 Rhaeto-Romance 8582 Urdu
6779 Corsican 7578 Kannada 8279 Rumanian 8590 Uzbek
7282 Croatian 7583 Kashmiri 8285 Russian 8673 Vietnamese
67/83 Czech 7575 Kazakh 8377 Samoan 8679 Volapük
6865 Danish 7589 Kirghiz 8365 Sanskrit 6789 Welsh
7876 Dutch 7579 Korean 7168 5Scots Gaelic 8779 Wolof
6978 English 7585 Kurdish 8382 Serbian 8872 Xhosa
6979 Esperanto 7679 Laothian 8372 Serbo-Croatian 7473 Yiddish
6984 Estonian 7665 Latin 8378 Shona 8979 Yoruba
7079 Faroese 7686 Latvian, Lettish 8368 Sindhi 9085 Zulu
Count ry Cod e List
Enter the appropriate code number for the initial setting “Country Code” (See page 23).
Code Country Code Country Code Country Code Country
AD Andorra ER Eritrea LC Saint Lucia SC Seychelles
AE United Arab Emirates ES Spain LI Liechtenstein SD Sudan
AF Afghanistan ET Ethiopia LK Sri Lanka SE Sweden
AG Antigua and Barbuda Fl Finland LR Liberia SG Singapore
Al Anguilla FJ Fiji LS Lesotho SH Saint Helena
AL Albania FK Falkland Islands LT Lithuania Si Slovenia
AM Armenia FM Micronesia LU Luxembourg SJ Svalbard and Jan Mayen
AN Netherlands Antilles FO Faroe Islands LV Latvia Islands
AO Angola FR France LY Libya SK Slovak Republic
AQ Antarctica FX France (European MA Morocco SL Sierra Leone
AR Argentina Territory) MC Monaco SM San Marino
AS American Samoa GA Gabon MD Moldavia SN Senegal
AT Austria GB Great Britain MG Madagascar SC Somalia
AU Australia GD Grenada MH Marshall Islands SH Suriname
AW Aruba GE Georgia MK Macedonia ST Saint Tome and Principe
AZ Azerbaidjan GF French Guyana ML Mali su Former USSR
BA Bosnia-Herzegovina GH Ghana MM Myanmar SV El Salvador
BB Barbados Gl Gibraltar MN Mongolia SY Syria
BD Bangladesh GL Greenland MO Macau SZ Swaziland
BE Belgium GM Gambia MP Northern Mariana Islands TC Turks and Caicos Islands
BF Burkina Faso GN Guinea MQ Martinique (French) TD Chad
BG Bulgaria GP Guadeloupe (French) MB Maurtania TF French Southern
BH Bahrain GQ Equatorial Guinea MS Montserrat Territories
Bl Burundi GR Greece MT Malta TG Togo
BJ Benin GS 5S. Georgia & S. Sandwich MU Mauritius TH Thailand
BM Bermuda Isls. MV Maldives TJ Tadjikistan
BM Brunei Darussalam GT Guatemala MW Malawi TK Tokelau
BO Bolivia GU Guam (USA) MX Mexico TM Turkmenistan
BR Brazil GW Guinea Bissau MY Malaysia TN Tunisia
BS Bahamas GY Guyana MZ Mozambique TO Tonga
BT Bhutan HK Hong Kong NA — Namibia TP Fast Timor
BY Bouvet Island HM Heard and McDonald NC New Caledonia (French) TR Turkey
BW Botswana Islands NE — Niger IT Trinidad and Tobago
BY Belarus HN Honduras NF Norfolk Island TV Tuvalu
BZ Belize HR Croatia NG — Nigeria ™ Taiwan
CA Canada HT Haiti NI Nicaragua TZ Tanzania
CC Cocos (Keeling) Islands HU Hungary NL Netherlands UA Ukraine
CF Central African Republic ID Indonesia NO Norway UG Uganda
CG Congo IE Ireland NP — Nepal UK United Kingdom
CH Switzerland IL Israel NA — Маши UM USA Minor Outlying
Cl Ivory Coast IN India NU Niue Islands
CK Cook Islands e British Indian Ocean NZ New Zealand US United States
CL Chile Territory OM Oman UY Uruguay
CM Cameroon IQ Iraq PA Panama uz Uzbekistan
CN China IR Iran PE Peru VA Vatican City State
CO Colombia IS Iceland PF Polynesia (French) VC Saint Vincent &
CHR Costa Rica IT Italy PG Papua New Guinea Grenadines
CS Former Czechoslovakia JM Jamaica PH Philippines VE Venezuela
CU Cuba JO Jordan PK Pakistan VG Virgin Islands (British)
CV Cape Verde JP Japan PL Poland VI Virgin Islands (USA)
CX Christmas Island KE Kenya FM Saint Pierre and Miquelon VM Vietnam
CY Cyprus KG Kyrgyzstan PM Pitcaim Island VU Vanuatu
CZ Czech Republic KH Cambodia6 PR Puerto Rico WF Wallis and Futuna Islands
DE Germany Kl Kiribati PT Portugal WS “Samoa
DJ Djibouti KM Comoros PW Palau YE Yemen
DK Denmark KN Saint Kitts & Nevis Anguilla PY Paraguay YT Mayotte
DM Dominica KP North Korea CA Qatar YU Yugoslavia
DO Dominican Republic KR South Korea RE Reunion (French) ZA South África
DZ Algeria KW Kuwait RO Romania ZM Zambia
EC Ecuador KY Cayman Islands RU Russian Federation ZR Zaire
EE Estonia KZ Kazakhstan RW Rwanda ZW Zimbabwe
EG Egypt LA Laos SA Saudi Arabia
EH western Sahara LB Lebanon SB Solomon Islands
@
“Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Symptom
Cause
Correction
No power.
e The power cord is disconnected.
e Plug the power cord into the wall outlet
securely.
The power is on, but
the DVD/CD/VCR
receiver does not work.
e No disc is inserted.
e No tape is inserted.
e Insert a disc or tape. (Check that the
disc or tape indicator in the display
window is lit.)
No picture, e The TV is not set to receive e Select the appropriate video input mode
DVD/CD/VCR receiver signal output. on the TV so the picture from the
DVD/CD/VCR receiver appears on the
TV screen.
e TV/VCR mode for DVD/CD/VCR receiv- | e Press the TV/VCR button on the remote
er is set to TV. control repeatedly to choose VCR
mode. TV indicator disappears in the
display window.
e The video cable is not connected e Connect the video cable securely.
securely.
e The connected TV power is turned off. e Turn on the TV.
No sound. e The equipment connected with the e Select the correct input mode on the
audio cable is not set to receive
DVD/CD/VCR receiver signal output.
audio receiver so you can listen to the
sound from the DVD/CD/VCR receiver.
e The audio cables are not connected
securely.
e Connect the audio cables securely.
e The power of the equipment connected
with the audio cables is turned off.
e Turn on the equipment connected with
the audio cables.
e The digital audio output is set to the
wrong position.
e Set the digital audio output to the
correct position, then turn on the
DVD/CD/VCR receiver again by press-
ing POWER.
The playback picture is
poor.
e The disc is dirty.
e Clean the disc.
e Tape heads are dirty.
e Clean video heads.
e Tape is a rental or was recorded on
another VCR.
e Use PRITRK (A/Y) for manual tracking
adjustment while tape is playing.
The DVD/CD/VCR
receiver does not start
playback.
e No disc is inserted.
e No tape is inserted.
e Insert a disc or tape. (Check that the
disc or tape indicator in the display
window is lit.)
e An unplayable disc is inserted.
e Insert a playable disc. (Check the disc
type, color system, and Regional code.)
e The disc is placed upside down.
e Place the disc with the playback side down.
e The disc is not placed within the guide.
e Place the disc on the disc tray correctly
inside the guide.
e The disc is dirty.
e Clean the disc.
e The Rating level is set.
e Cancel the Rating function or change
the rating level.
The remote control
does not work properly.
e The remote control is not pointed at the
remote sensor of the DVD/CD/VCR receiver.
e Point the remote control at the remote
sensor of the DVD/CD/VCR receiver.
e The remote control is too far from the
DVD/CD/VCR receiver,
e Operate the remote control within 23 ft
(7 m).
e There is an obstacle in the path of the remote
control and the DVD/CD/VCR receiver.
es Remove the obstacle.
e The batteries in the remote control are
exhausted.
e Replace the batteries with new ones.
e This remote control uses the same
buttons for VCR and DVD functions
(ex. PLAY).
e When using a VCR, first press the VCR
button. When using a DVD, first press
the CD/DVD button.
_Troubleshooting (Continued)
Symptom
Cause
Correction
The tape does not run
during recording.
Ф The DVD/CD/VCR receiver is in the
RECORD PAUSE MODE.
e Press PAUSE/STEP (II) to resume
recording.
The tape will not rewind
or fast-forward.
The tape is already fully rewound or
fast-forwarded,
e Check the tape.
The playback picture
does not appear while
the tape is running.
If you're using only the RF cable for
connection.
e Set the TV to the Video channel (see p.
15).
Noise appears during
visual search.
This is normal.
e Turn camcorder on and operate
properly.
Noise appears during
normal playback.
The automatic tracking mode is
engaged.
e Try manual tracking (see p. 24).
Breaks are noticeable
in Hi-Fi soundtrack.
The automatic tracking mode is
engaged.
e Try manual tracking (see p. 24).
Recording cannot be
started.
There is no tape loaded, or the tape
loaded has had its record safety tab
removed.
e Insert a tape, or using adhesive tape,
cover the hole where the tab was
removed.
Tape-to-tape editing is
not possible.
The source (another VCR, camcorder)
has not been properly connected.
e Confirm that the camcorder is properly
connected,
Timer recording won't
work.
The clock/or the timer have been set
incorrectly.
The timer is not engaged.
The loaded tape has had its record
safety tab removed.
e Re-perform the clock and/or timer set-
tings.
e Press POWER and confirm that the
timer indicator is displayed on the
DVD/CD/VCR receiver's Display.
e Insert a pate with adhesive tape, or
insert a tape with the record safety tab
intact,
No Hi-Fi sound,
e Audio mode is not set properly.
e Select "STEREO" by repeatedly pressing
AUDIO on the remote control.
Moisture Condensation
Moisture condensation can occur:
In locations where moisture condensation may occur:
* When the DVD/CD/VCR receiver is moved from a
cold place to a warm place.
* Under extremely humid conditions.
* Keep the DVD/CDNCR receiver plugged into an AC power
outlet with POWER On. This will help prevent condensation.
* When condensation has occurred, wait a few hours
for the DVD/CD/VCR receiver to dry before using it.
“Specifications — TT
General
Power requirements AC 240V- ,50 Hz
Power consumption 130 W
Dimensions (approx.) 430 X 90 X 350 mm (w x h x d)
Mass (approx.) 8 kg (17.6 lbs)
Operating temperature 5Cto40°C (41°F to 104°F)
Timer 24-hour display type
Operating humidity 5 % to 90 %
DVD Section
Laser Semiconductor laser, wavelength 650 nm
Signal system PAL/NTSC
Frequency response DVD (PCM 96 kHz): 8 Hz to 44 kHz
DVD (PCM 48 kHz): 8 Hz to 20 kHz
CD: 8 Hz to 20 kHz
Signal-to-noise ratio More than 70 dB (analog out connectors only)
Harmonic distortion Less than 1.0%
Dynamic range More than 60 dB (DVD)
More than 60 dB (CD)
Outputs
S-VIDEO OUT (Y) 1.0 Y (p-p), 75 ohms, negative sync, Mini DIN 4-pin x 1
(C) 0.3 V (p-p) 75 ohms
VCR Section
Head system 4 heads helical scan azimuth system
Television system PAL/SECAM colour system
Recording format PAL/MESECAM
RF OUT G
RF Modulator UHF 28-68 (Adjustable)
Tape speed PAL/MESECAM; 23.39 mm/s (SP), 16.69 mm/s (LP)
NTSC (Playback only); 35.35 mm/s (SP), 16.67 mm/s (LP),
11.12 mm/s (EP)
Maximum recording time SP: 4 h (E-240 tape), LP: 8 h (E-240 tape)
Rewind time About 180 min (E-180 tape)
Input level VIDEO: 1.0 V(p-p), 75 ohms, unbalanced
AUDIO: -6.0 dBm, more than 10 kohms (SCART)
-6.0 dBm, more than 47 kohms (RCA)
Output level VIDEO: 1.0 V(p-p), 75 ohms, unbalanced
Signal-to-noise ratio VIDEO: More than 43 dB
AUDIO: More than 72 dB (Hi-Fi)
More than 42 dB (Mono)
Dynamic range AUDIO: More than 85 dB
Tuner Section
Tuning range FM: 87.5 - 108.0 MHz
AM: 522 - 1611 kHz
Intermediate frequency FM: 10.7 MHz
AM: 450 kHz
Amplifier Section
Stereo mode 20W + 20W (4 ohm at 1 kHz, THD 10%)
Surround mode Front: 20W + 20W (THD 10%)
Centre: 20W
Surround: 20W + 20W (4 ohm at 1 kHz, THD 10%)
Subwoofer: 40W (8 ohm at 30 Hz, THD 10%)
“Specifications (Continue:
Speaker Section
Satellite (LHS-C6230T)
Type 1 Way 1 Speaker
Impedance 4 Q
Frequency Response 130 - 20,000 Hz
Sound Pressure Level 83 dB/W (1m)
Rated Input Power 20W
Max Input Power 40W
Net Dimensions (W x H x D) 88 x 100 x 95 mm
Net Weight 0.54 kg
Passive Subwoofer (LHS-C6230W)
Type 1 Way 1 Speaker
Impedance 8 Q
Frequency Response 50 - 1,500 Hz
Sound Pressure Level 82 dB/W (1m)
Rated Input Power 40W
Max Input Power 80W
Net Dimensions (W x H x D) 160 x 350 x 325 mm
Net Weight 4.12 kg
Accessories:
RF 75-ohm Coaxial Cable x 1, Speaker cable x 5, RCA-SCART cable x 1, AM loop antenna x 1, FM antenna x 1,
Remote control x 1, Batteries (AAA) x 2
e Design and specifications are subject to change without notice.
Manufactured under license from Dolby Laboratories. “Dolby”, "Pro Logic” and the double-D symbol are trademarks of Dolby
Laboratories.
"DTS" and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
P/N: 3828R-D036A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement