LG LSR700P-EA
Add to my manuals24 Pages
LG LSR700P-EA is a high-quality color IR camera with impressive features for both indoor and outdoor surveillance. It boasts a 1/3” SUPER HAD COLOR CCD sensor, delivering 540TVL resolution in color mode and 570 TVL in black and white. With 45 IR LEDs, it offers a maximum IR LED valid distance of 70 meters, ensuring clear night vision even in complete darkness. Its 3-axis bracket and adjustable zoom and focus levers allow for precise positioning and clear images.
advertisement
▼
Scroll to page 2
of 24
LG Color IR Camera Owner's Manual Model : LSR700 ** Before installing or adjusting please read installation guide that accompany this product. Failure to follow warning notices and instructions may result in property damage. Improper installation and/or operation will void the warranty. Before Using or Installing. Please do not make any attempt to disassemble the camera. Do not attempt to open camera. There is no space for consumers to construct or execute. Please consult to professional installer. Please do not use strong chemicals or detergent. Use dry towel to wipe off the camera, Please do not disclose the camera under direct sunlight. Do not aim camera directly at bright object. By doing so, this action will cause blooming or smear. Please handle camera with care. Do not put camera near fire, as this may cause fire. to clean off the stain use weak cleaning Please do not hit, or shake the camera. detergent. Before operation please check the temperature, humidity, and level of the power. Please operate camera between temperature levels of - 10€ ~ 50T. Please do not disclose the camera, if there is lot of smoke or gas. This could cause camera to malfunction. Improper care or use of the camera could damage the camera. Please do not make childrens handle or operate camera. It may cause children's accidents or camera's malfunction. Table of Contents ul == 110] = AE 4 How to use the product & Warnings on Installation...... 4 Product composition Xx Parts names..................e..e=eee=. 5 Installation % Connection................... e .ee..=eeeeeereee E 7 Troubleshooting.................e......eeeeerierrecenre recerca. 9 OSD MENU -...............eeeeeeeececccccrieeeeeeeeneeeescaseseececeemeem. 10 Product Specifications 21 Feature * Sony 1/3” SUPER HAD COLOR CCD * Resolution 540TVL (Color), 570 TVL(B/W) « DAY & NIGHT Auto Change - Varifocal DC AUTO IRIS 6-50mm F1.4 * 45 IR LED * Max. 70m IR LED Valid Distance * Min. lllumination OLUX (LED ON) * 3 AXIS BRACKET * Zoom € Focus adjustment Levers * DC IRIS adjustment Lever * OSD Control Button * Water / Dust Proof (IP 66)DC IRIS LEVEL * Use of DC 12V How to Use & Installations Warnings Use of DC 12V. (Use DC12V, 1A adapter) Using improper power supply could lead to fire, electronic shock, and malfunction of camera. Prevent water, liquid, metal or foreign object getting inside the Camera. Use dry towel to clean camera instead of the abrasive. (This could bring low quality screen view of camera.) Do not misplace the camera. And prevent any malfunction. Do not use camera in humid or wet area. Do not disclose camera to direct sunlight Do not expose camera to massive electric wave. Do not install camera location with lot of vibration. Do not install product near very high temperature or very low temperature area. ( Please refer to our operation manual on operation temperature & storage temperature.) Focus in darkness, and you can see clear image at daytime & nightime. 4 Product composition & Parts names 1) Sun Shield 2) Sun Shield station screw 3) Window Glass 4) Window Glass Film Cover 5) IR LED 6) CDS Sensor 7) Camera Body 8) Bracket 9) Up & Down control screw 10) Rotation Control Screw 11) Left & Right Control Screw 12) Zoom Control Level 13) Focus Control Level 14) Back Cover 15) DC IRIS Control Level 16) Video Out Connector 17) OSD Button 18) Bracket Stationary 19) Cable 20) Power DC12V — Red 21) Video RCA Jack — Yellow 22) Accessary - Portable monitor - connector cable -"L" wrench - Bracket Station Screw - Sun Shiel Product composition & Parts names 3 Axis adjust bracket O UpáDown 4 Rotation Control Screw Contro Screw Control Screw INSTALLATION & CONNECTION 1) Locate Installation Area. Select area where it would hold the camera for long time. 2) Station 3-Axis Bracket on the wall or ceiling with "L" Wrench and screw A << given and O © select the area you would like to monitor. 3) Using Sunshield bolt tighten the sunshield 4) Connect Power ( Red ) DC12V and Video ( Yellow ). Or in toVideo Input of DVR. 5) Manually turn the level behind camera and richt N par set camera view to close range or distanced range, as well as setting up the focus of the camera. ** For Zoom-out turn the knob to W direction, DC IRIS to Zoom-in turn the knob to T direction. ** Until the camera focus is clear turn the focus level to N (close range) or F (distanced range). 6) Using a flat screw driver open the cover behind camera. INSTALLATION & CONNECTION UP DOWN VIDEO OUT CONNECTOR LERT RIGHT OSD BUTTON 7) OSD button function in the back cover is as followings. ** DC-IRIS Volume Switch : To view brighter screen, turn the switch to counter-clockwise direction using a screw driver. Also to see the darker drive turn the switch clockwise. ** OSD function key you should be able to control screen configuration. You are also able to use this camera with video port. 8) After done with setting camera configuration to prevent any smear of water seal the back cover tight. ADAPTOR JACK =p POWER INPUT JACK | 0000000000000000000000 OR DVR MONITOR Trouble Shooting If you are not able to view anything from the screen. Check power, video, strength of signal. Check monitor input/output. Check camera connection number with monitor. For Fuzzy Screen -Check camera lens for dust or dirt. If so wipe them off with dry towel or brush. -Check cover to see if it’s clean. If so wipe them off with dry towel or brush. -Check for direct sunlight exposure towards camera. -Check and see if protection film from camera cover is removed. -Check for camera focus. For Dark Screen Check for Monitor Brightness. Unbalanced Black & White on the Monitor. -Check Monitor -Adjust the cameras position or angle of lens when screen is bright -Turn BLC off. When screen is not clear with IR LED functioning. -Check glass cover for dust : If there is dust clean them with dry towel or brush. If problem still remains please contact our Technical Support Department. 9 OSD MENU r N 10 SET MENU SHUTTER | AUTO(0-255 Step) Г Hire [60 or /50+11100,000 sec) BLC ON/OFF AGC ON/OFF WHITE BAL. ATW ( AWB / FIXED / MANUAL) DAY&NIGHT AUTO(BW/COLOR) PRIVACY ON/OFF GAMMA 0.05~1.00 ADJUST CONTRAST / SHARPNESS / CB_GAIN / CR_GAIN RESET EXIT OSD(SCREEN CONTROL) - Setting with OSD function you could control UP&DOWN to select your desire mode. ** OSD function provide convenience for consumers to set their own setting from the outside of the camera. Behind back cover of the camera you can control UP 8: Down , Left & Right with 1 OSD function key. SETUP 1. Click on Enter Button (Press down) SHUTTER FIXED 4 - Setup Start. BLC OFF Setup Menu will appear. AGC ON « WHITEBAL. ATW 2. Use OSD key to UP, Down to your DAY NIGHT AUTO = desire selection. PRIVACY OFF GAMMA 0.45 3. To change current setting to different ADJUST < h to LEFT or Right to ch RESET d push to I or Right to change » EXIT current configure. 4. Select Exit and Enter. Then the configuration is successfully saved. 11 OSD(SCREEN CONTROL) Menu - SHUTTER SETUP SHUTTER FIXED BLC OFF AGC ON « WHITE BAL. ATW DAY NIGHT AUTO el PRIVACY OFF GAMMA 0.45 ADJUST < RESET <) » EXIT * Fixed - Fixed Shutter: Control shutter speed manually - Configure Range: 1/60 - 1/100,000 Sec(NTSC) 1/50 ~ 1/100,000 Sec(PAL) * Manual - Shutter: Manually controls the speed of shutter (Configure Range: 0~255 Range) * FLK - Fuzzy Screen Prevention: In case of unbalanced surrounding light & electric frequency. When screen is fuzzy "FLK", it will function and reset the mode. 12 OSD(SCREEN CONTROL) Menu - BLC(Back Light Compensation) with OSD function you could control UP&DOWN to select your desire mode. Ue BLC ON - SETUP >, SHUTTER FIXED 4 N'BLC AREA BLC AGC ON del WHITE BAL. ATW | A | DAY NIGHT AUTO 4 PRIVACY OFF BLC OFF GAMMA 0.45 ADJUST od RESET a EXIT Select your desire mode to push OSD key to Left or Right. — On: Allows you to control Gamma & Back Light Compensation. If there is a strong light behind an objective, With Back Light Compensation it provide you clear image. When "ON" is selected and entered, BLC can be controled. BLC AREA: Select area where you would like to observe. BLC RATIO: Controls Brightness. It control Objects brightness could be increase from 0 and decrease to 63. - Off: Back Light Compensation is not effective. 13 OSD(Screen Control) Menu -AGC ( Auto Gain Control) with OSD function you could control UP&DOWN to select your desire mode. SETUP AGC CONTROL SHUTTER FIXED BLC ON AGC GAIN 200 NU A = DAY NIGHT AUTO PRIVACY OFF GAMMA 0.45 ADJUST o RESET a el : RETURN EXIT *ON -AGC controls brightness from 0 ~ 255 Range * OFF -When AGC function is off Day/Night & IR on/off functions do not operate. 14 OSD(Screen Control) Menu - WHITE BAL. (White Balance) with OSD function you could control UP&DOWN to select your desire mode. SETUP SHUTTER FIXED BLC ON AGC ON « DAY NIGHT AUTO PRIVACY OFF GAMMA 0.45 ADJUST «й ВЕЗЕТ da EXIT O Auto Tracking White Balance This Mode operate when color temperature goes out of range between 2500K - 9500K. O AWB ( AUTO WHITE BALANCE ) AWB detects white color balance on the screen and based on sensor white balance functions automatically between the range of 2500K ~ 9500K. @® Fixed : White Balance could be manually controlled, by using UP & DOWN key.. Mode1: 2500K Mode2:3200K Mode3:5100K Mode4:9500K @ Manual This mode could be used manually when you are wishing to configure color of Red & Blue. 15 OSD(Screen Control) Menu - Day & Night with OSD function you could control UP&DOWN to select your desire mode. SETUP SHUTTER FIXED 4 BLC ON + AGC ON + WHITE BAL ATW PRIVACY OFF GAMMA 0.45 ADJUST a RESET a EXIT -Auto : With cameras illumination it automatically change Day & Night. If the Illumination is high it changes to Color & If illumination is low it changes to black & white. -Delay : This function allow you to set delay time of when to change camera to Day & Night mode.. -Start Level : Set the start brightness control from the location. O( High Light) - 255(Low Light) -End Level : Set the end brightness control from the location O( High Light) ~ 255(Low Light) * Remarks If changing the setting value of START LEVEL or END LEVEL, the Lux of IR on changes accordingly 16 OSD(Screen Control) Menu - Day & Night -Color: This function keeps camera on COLOR mode. - Black / White : This function allow you to set your setting to Black / White Mode. -Burst On: This turn on Burst mode to on -Burst Off : This turn off Burst mode to off. x OPERATING CONDITION. 1) Because Burst Control is related to Auto Gain Control when AGC is off Burst function will not be active. 2) Please set Delay time to minimum of 3 second. (If the setting is set at "0" Day Mode will operate) 3) Because Start Level is related to AGC, Start Level must be less than AGC level. 4) Start Level MUST be above End Level. 17 OSD (Screen Control) Menu - Privacy with OSD function you could control UP&DOWN to select your desire mode. и IN PRIVACY OFF У SETUP E, > SHUTTER FIXED 4 BLC ON + AGC ON < WHITE BAL. ATW | À | | DAY NIGHT AUTO PRIVACY ON PRIVACY (e x GAMMA 0.45 1p) ADJUST I ll PRIVACY ZONE RESET A [PRIVACY ZONE EXIT * OFF : Cancel Privacy Mode. A * ON : Start Privacy Mode. * Select "On" button and select menu button and enter to start your setup for privacy. -From 4 given areas, select your area where you wish to use privacy function. -Select on button and select the area where you would like privacy function to work and expand if necessary. -From the color menu use Left/Right button to control the color. -By using Left/Right/Up/Down button and resize the area where you would like privacy to function & press menu button to save and exit. 18 OSD (Screen Control) Menu - Gamma with OSD function you could control UP&DOWN to select your desire mode. SETUP SHUTTER FIXED BLC ON AGC ON + WHITE BAL. ATW DAY NIGHT AUTO PRIVACY OFF + ADJUST у ВЕЗЕТ < EXIT When MENU shows "GAMMA", you can control the value to use OSD key to left or right. Brightness control could be functioning from 0.05 ~ 1. 19 OSD (Screen Control) MENU - ADJUSTMENT with OSD function you could control UP&DOWN to select your desire mode. SETUP ADJUST SHUTTER FIXED 67 BLC ON < AGC ON < WHITE BAL. ATW SHARPNESS 16 DAY NIGHT AUTO DE | PRIVACY OFF CB_GAIN 200 GAMMA 0.45 I | CR_GAIN 200 RE, ms) EXIT @ Contrast: You could configure the level from 0-255. @ Sharpness: If the sharpness level increase the image of video will be more clear, but if level is too high it will affect the view and increase noise. @ CB_Gain: This will help gain better blue color level (0-255 steps) O CR Gain: This will help gain better red color level (0~255 steps) * Blue, Red If the value is too high, it will be affected with the image quality and increase noise. 20 Product Specification Specification NTSC PAL Image Sensor 1/3" INTERLINE Color CCD(Super HAD) Picture Elements 768(H) x 494(V)/380K 752(H) x582(V)/440K Scanning System 525Lines, 2:1 Interlace 625 Lines, 2:1 Interlace Electronic Frequency 15.834KHz(H),59.94Hz(V) 15.625KHz(H), 50Hz(V) Horizontal Resolution 540tvi(color), 570TVL(B/W) Shuuter speed 1/60~1/100,000 1/50~1/100,000 S/N Ratio More Than 48dB (AGC Off) sync System Internal Minimum Lux OLux(AGC High), IR LED 45ea White Balance ATW(AWB/FIXED/MANUAL) Video Output CVBS 1Vp-p (75) Lens 6-50mm Day & Night Varifocal , DC Auto Iris Lens(F1.4) Power Consumption DC12V+10% Used Electronicity Max 100mA(IR OFF), Max 700mA(IR ON) Operation Temperature -10T-50T ,0%RH-80%RH Storage Temperature -20'C-60 T ,0%RH-80%RH Size 96 x 160 mm Weight 1450g 21 WARRANTY Product Name : Model Name : Purchas Data : Customer Name : Tel : Adress : Store Name : Tel : Adress : Please keep this wanrranty document until your service requirement for LG Electronics 1. This product will receive its warranty under the warranty policy purchase date from the store. ( If the product purchase date is date.) 3. If house supply is used for commercial purpose or if it's a ( Major parts included ) 4. This warranty document will not be reissued. warranty will be effected under flexible warranty condition. 2. Warranty service will start as of the purchase date. Please acquire unavailable, warranty date will start 3month after the manufacture commercial product the warranty date will be decrease down to 1/2. 5. If sub-part were supply and under condition of other contract, the @ LG Electronics Major Supply Storage Term. *Refrigerator, TV, Audio, Microwave, Room Air-condition, Commercial Refrigerator, Fan 7 years. *Car set 6 years. *VTR, Video Camera, DVD Player, MP3 Player, Gas Oven, Pan Heater, Fan, Air Refresher 5 years. *Rice Cooker, PC and other accessory ——— se 4 years. *Cell Phone, Gas Stove 3 years. **And all the similar above product. Major Supply Warranty Term. *Refrigerator, Air condition compressor, TV CPT, Monitor CDT -------—- 4 years. *Wash Machine Motor, Micro Wave Magnetron, VTR Head Drum, Fan Heater, Rotary Heater, Burner, PC Main Board ( Mother Board) ------------------ 3 years *LCD TV, PDP TV, LCD Monitor Panel ( Notebook Monitor is excluded) 2 years. ** Even though Product Warranty still exist if the use time of 10,000 hours for MONITOR CDT exceed warranty is voided. For LCD TV, PDP TV, LCD Monitor panel exceed use time of 5,000 will void the warranty 22 MEMO
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- Indoor
- CCD 25.4 / 3 mm (1 / 3")
- Wired
- Night vision IR
- Bullet Wall
- Black
Related manuals
Frequently Answers and Questions
What is the minimum illumination required for the camera to operate?
0 LUX (with IR LEDs ON).
What is the maximum IR LED valid distance?
70m.
What is the temperature range in which the camera can operate?
-10°C ~ 50°C (-14°F ~ 122°F).
What is the power supply requirement for the camera?
DC 12V, 1A adapter.
What is the video output connector type?
RCA jack (yellow).
How can I adjust the camera's focus?
Manually turn the focus control level behind the camera to 'N' (close range) or 'F' (distanced range) until the image is clear.
What is the purpose of the OSD (On-Screen Display) button?
The OSD button allows you to control the camera's settings, such as shutter speed, white balance, and day/night mode.
What is the function of the DC IRIS control level?
The DC IRIS control level adjusts the brightness of the image. Turning the switch counter-clockwise will brighten the image, while turning it clockwise will darken the image.