Samsung | SBB-IS08E | Samsung SBB-IS08E User Manual

User Manual
SBB-IS08E
IL015E IL020F IL025E
IS015F IS020F IS025F
The colour and the appearance may differ depending on the
product, and the specifications are subject to change without prior
notice to improve the performance.
Table of contents
Before Using the Product
Copyright4
Safety Precautions
5
Electricity and Safety
5
Installation6
Operation7
Cleaning8
Storage8
Preparations
Parts9
Reverse Side (SBB-IS08E)
9
Reverse Side (IL015E IL020F IL025E IS015F
IS020F IS025F)
10
Remote Control
11
Remote Control (SBB-IS08E model only)
13
Cable Connection
13
Connection14
Control Codes
15
Connection Using a DVI-HDMI Cable
Connection Using an HDMI Cable
Connection Using an HDMI-DVI Cable
Connection Using an DP Cable
20
20
20
21
Connecting to a Video Device
Connection Using an HDMI-DVI Cable
Connection Using an HDMI Cable
22
22
23
Connecting the LAN Cable
23
Installing the cabinets
Removing the protective brackets
Assembling the cabinets
Replacing the cabinet module
24
24
24
25
Precautions when handling the cabinets
26
Restrictions when installing cabinets
26
Connecting to cabinets
Connecting HDBT cables
Connecting DP cables for redundancy
Connecting RS232C cables for redundancy
Recommended number of devices for
connection for each input voltage
27
27
27
28
28
Changing the Input source
29
Source29
Connecting and using devices
Before Connecting
Pre-connection Checkpoints
19
19
Connecting to a PC
Connection using a DVI cable
19
19
Using LED Signage Manager
Home feature
Player31
Approving a connected device from the server32
Network Channel
36
Local Channel
36
Network File
36
My Templates
36
Available features in the Player page
37
Player page Settings menu
38
When Content is Running
40
File Formats Compatible with Player42
Schedule47
Available features in the Schedule page
47
Template49
Clone Product52
ID Settings53
Device ID
53
PC Connection Cable
53
Device ID Auto Set
53
Network Status54
On/Off Timer55
On Timer55
Off Timer56
Holiday Management56
Ticker57
More settings58
URL Launcher59
2
Table of contents
OSD (On Screen Display) menus
Screen Adjustment
60
OnScreen Display63
Network64
Network Status64
Network Settings64
Multimedia Device Settings67
Server Network Settings67
Device Name67
System68
Support71
Playing photos and
videos (Media Play)
Read the following before using media play
with a USB device
72
Using a USB device
74
Supported Subtitle and Media play file
formats79
Subtitle
79
Supported image resolutions
79
Supported Video Formats
80
Appendix
Troubleshooting Guide
Licence95
Requirements Before Contacting Samsung
Customer Service Centre
Testing the Product
Checking the Resolution and Frequency
Check the followings.
82
82
82
83
Q & A
88
Responsibility for the Pay Service
(Cost to Customers)
94
Not a product defect
94
A Product damage caused by customer's fault 94
Others94
Specifications
General90
Preset Timing Modes
92
Features provided in the media content list
page75
Menu items in the media content list page 76
Available buttons and features during photo
playback77
Available buttons and features during video
playback78
3
Chapter 01
Before Using the Product
Copyright
The contents of this manual are subject to change without notice to improve quality.
© 2016 Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.
Microsoft, Windows are registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Ownership of all other trademarks is attributed to their due owner.
4
Safety Precautions
Caution
RISK OF ELECTRIC SHOCK DO NOT OPEN
Caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. (OR BACK)
THERE ARE NO USER SERVICEABLE PARTS INSIDE.
REFER ALL SERVICING TO QUALIFIED PERSONNEL.
Connect the power plug to a grounded power socket (type 1 insulated devices only).
•• An electric shock or injury may result.
Do not bend or pull the power cord with force. Be careful not to leave the power cord under a
heavy object.
•• Damage to the cord may result in a fire or electric shock.
Do not place the power cord or product near heat sources.
•• A fire or electric shock may result.
Clean any dust around the pins of the power plug or the power socket with a dry cloth.
•• A fire may result.
This symbol indicates that high voltage is present inside.
Caution
It is dangerous to make any kind of contact with any internal part of this product.
Do not disconnect the power cord while the product is being used.
•• The product may become damaged by an electric shock.
This symbol alerts you that important literature concerning operation and maintenance has
been included with this product.
Electricity and Safety
Only use the power cord provided with your product by Samsung. Do not use the power cord
with other products.
•• A fire or electric shock may result.
Keep the power socket where the power cord is connected unobstructed.
Warning
•• The power cord must be disconnected to cut off power to the product when an issue
occurs.
Do not use a damaged power cord or plug, or a loose power socket.
•• Note that the product is not completely powered down by using only the power button on
the remote.
•• An electric shock or fire may result.
Do not use multiple products with a single power socket.
Hold the plug when disconnecting the power cord from the power socket.
•• An electric shock or fire may result.
•• Overheated power sockets may cause a fire.
Do not touch the power plug with wet hands. Otherwise, an electric shock may result.
Insert the power plug all the way in so it is not loose.
•• An unsecure connection may cause a fire.
5
Installation
Caution
Warning
Do not drop the product while moving.
DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO
NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.
Do not set down the product on its front.
•• A fire may result.
Have a technician install the wall-mount hanger.
•• Product failure or personal injury may result.
•• The screen may become damaged.
When installing the product on a cabinet or shelf, make sure that the bottom edge of the front
of the product is not protruding.
•• Installation by an unqualified person can result in an injury.
•• The product may fall and become damaged and/or cause an injury.
•• Only use approved cabinets.
•• Install the product only on cabinets or shelves of the right size.
Do not install the product in poorly ventilated spaces such as a bookcase or closet.
•• An increased internal temperature may cause a fire.
Install the product at least 10 cm away from the wall to allow ventilation.
•• An increased internal temperature may cause a fire.
Keep the plastic packaging out of the reach of children.
•• Children may suffocate.
Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface,
etc.)
Set down the product gently.
•• Product failure or personal injury may result.
Installing the product in an unusual place (a place exposed to a lot of fine dust, chemical
substances, extreme temperatures or a significant presence of moisture, or a place where
the product will operate continuously for an extended period of time) may seriously affect its
performance.
•• Be sure to consult Samsung Customer Service Centre if you want to install the product at
such a place.
•• The product may fall and become damaged and/or cause an injury.
•• Using the product in an area with excess vibration may damage the product or cause a fire.
Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.),
oil, or smoke.
•• A fire or electric shock may result.
Do not expose the product to direct sunlight, heat, or a hot object such as a stove.
•• The product lifespan may be reduced or a fire may result.
Do not install the product within the reach of young children.
•• The product may fall and injure children.
Edible oil, such as soybean oil, can damage or deform the product. Do not install the product in
a kitchen or near a kitchen counter.
6
Operation
Do not use or keep combustible spray or an inflammable substance near the product.
•• An explosion or fire may result.
Warning
There is a high voltage inside the product. Never disassemble, repair or modify the product
yourself.
•• A fire or electric shock may result.
•• Contact Samsung Customer Service Centre for repairs.
Before moving the product, turn off the power switch and disconnect the power cable and all
other connected cables.
•• Damage to the cord may result in a fire or electric shock.
If the product generates abnormal sounds, a burning smell or smoke, disconnect the power
cord immediately and contact Samsung Customer Service Centre.
•• An electric shock or fire may result.
If the product is dropped or the outer case is damaged, turn off the power switch and
disconnect the power cord. Then contact Samsung Customer Service Centre.
•• Continued use can result in a fire or electric shock.
Do not leave heavy objects or items that children like (toys, sweets, etc.) on top of the product.
During a lightning or thunderstorm, power off the product and remove the power cable.
•• A fire or electric shock may result.
Do not drop objects on the product or apply impact.
•• A fire or electric shock may result.
Do not move the product by pulling the power cord or any cable.
•• Product failure, an electric shock or fire may result from a damaged cable.
If a gas leakage is found, do not touch the product or power plug. Also, ventilate the area
immediately.
•• Sparks can cause an explosion or fire.
Do not lift or move the product by pulling the power cord or any cable.
•• Product failure, an electric shock or fire may result from a damaged cable.
Ensure the vents are not blocked by tablecloths or curtains.
•• An increased internal temperature may cause a fire.
Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects that burn easily (paper,
matches, etc) into the product (via the vent or input/output ports, etc).
•• Be sure to power off the product and disconnect the power cord when water or other
foreign substances have entered the product. Then contact Samsung Customer Service
Centre.
•• Product failure, an electric shock or fire may result.
Do not place objects containing liquid (vases, pots, bottles, etc) or metallic objects on top of
the product.
•• Be sure to power off the product and disconnect the power cord when water or other
foreign substances have entered the product. Then contact Samsung Customer Service
Centre.
•• Product failure, an electric shock or fire may result.
Caution
Disconnect the power cord from the power socket if you do not plan on using the product for an
extended period of time (vacation, etc).
•• Dust accumulation combined with heat can cause a fire, electric shock or electric leakage.
Do not put DC power adapters together.
•• Otherwise, a fire may result.
Remove the plastic bag from the DC power adapter before you use it.
•• Otherwise, a fire may result.
Do not let water enter the DC power device or get the device wet.
•• An electric shock or fire may result.
•• Avoid using the product outdoors where it can be exposed to rain or snow.
•• Be careful not to get the DC power adapter wet when you wash the floor.
7
Do not put the DC power adapter near to any heating apparatus.
•• Otherwise, a fire may result.
Keep the DC power adapter in a well-ventilated area.
If you place the AC/DC power adapter so that it is hanging with the cord input facing
upwards, water or other foreign substances could enter the Adapter and cause the Adapter to
malfunction.
Make sure to rest the AC/DC power adapter flat on a table or the floor.
The screen is bright. Keep a sufficient distance from the screen.
•• Continuously looking at the screen up close is bad for your eyes.
――e.g., pixels x 3 m
For IL015E, IS015F: 1.5 x 3 m = a distance of at least 4.5 m is recommended
For IL020F, IS020F: 2.0 x 3 m = a distance of at least 6.0 m is recommended
For IL025E, IS025F: 2.5 x 3 m = a distance of at least 7.5 m is recommended
Do not use humidifiers or stoves around the product.
•• A fire or electric shock may result.
The batteries (and rechargeable batteries) are not ordinary refuse and must be returned
for recycling purposes. The customer is responsible for returning the used or rechargeable
batteries for recycling.
•• The customer can return used or rechargeable batteries to a nearby public recycling
centre or to a store selling the same type of the battery or rechargeable battery.
Do not dispose of batteries in a fire.
Cleaning
――Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
――Be careful when touching the LED fixture on the front of the product. There is a risk that
LED elements may fall off.
Storage
――Contact Customer Service Centre if the inside of the product needs cleaning (service fee will
be charged).
Do not touch the product if it has been turned on for a long time. The product may be hot.
Store small accessories out of the reach of children.
Do not place heavy objects on the product.
•• Product failure or personal injury may result.
Be careful that children do not place the battery in their mouths when removed from the
remote control. Place the battery in a location that children or infants cannot reach.
•• If children have had the battery in their mouths, consult your doctor immediately.
When replacing the battery, insert it with the right polarity (+, -).
•• Otherwise, the battery may become damaged or it may cause fire, personal injury or
damage due to leakage of the internal liquid.
Use only the specified standardised batteries, and do not use a new battery and a used battery
at the same time.
•• Otherwise, the batteries may be damaged or cause fire, personal injury or damage due to
a leakage of the internal liquid.
8
Chapter 02
Preparations
Parts
Reverse Side (SBB-IS08E)
Parts
――The colour and shape of parts may differ from what is shown. Specifications are subject to
SOURCE
Select the connected input source.
SERVICE
Dedicated to service technicians.
RJ45
Connect to a network using the LAN cable.
USB
Connect to a USB memory device.
DP OUT
Connects to another SBB-IS08E, using a DP cable.
DVI IN
Connects to a source device using a DVI cable or HDMI-DVI cable.
HDMI IN
Connects to a source device using a HDMI cable or HDMI-DVI cable.
DP IN
Connects to a PC using a DP cable.
HDBT OUT
Connects to an IL015E, IL020F, IL025E, IS015F, IS020F or IS025F device,
using an HDBT cable.
DC 14V
Connects to the DC power adapter.
change without notice to improve quality.
Parts
IR
Description
Aim the remote control towards this spot on the LCD Display.
――Using other display devices in the same space as the remote
control of this product can cause the other display devices to be
inadvertently controlled.
Description
Connects to a display device, using a DVI or HDMI-DVI cable.
View the power status of SBB-IS08E.
Turn the product on or off.
View the input source status of SBB-IS08E.
9
Reverse Side (IL015E IL020F IL025E IS015F IS020F IS025F)
――The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
Parts
IL015E IL020F IS015F IS020F
IL025E
IS025F
Description
DP OUT
Connect to the DP IN port on the next cabinet, using a DP cable.
DP IN
Connect to the DP OUT port on the previous cabinet, using a DP cable.
――This port can be used if an issue occurs with the HDBT video signal.
Thumbscrew
UART OUT
Connect to the UART IN port on the previous cabinet.
UART IN
Connect to the UART OUT port on the first cabinet and the UART IN port
on the next cabinet.
――This port can be used if an issue occurs with the HDBT control
signal.
HDBT OUT
Connect to the HDBT IN port on the previous cabinet.
HDBT IN
Connect SBB-IS08E to multiple cabinets, using the HDBT cable.
――Refer to "Connecting to cabinets" on page 27 for details.
SWITCH
Select the connected input source (HDBT or DP).
LIGHT SENSOR
Connect to the external light sensor.
――After initial installation and servicing, tightly fasten the thumb screws using the appropriate
tool.
10
Remote Control
――Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled.
――A button without a description in the image below is not supported on the product.
Power on the product.
Power off the product.
Number buttons
Enter the password in the OSD menu.
–– Remote control button functions
may differ for different products.
Mute the sound.
Unmuting the sound: Press MUTE again or
press the volume control(+ VOL -) button.
Change the input source.
Use this hotkey to directly access MagicInfo.
Display or hide the onscreen display menu, or
return to the previous menu.
The hotkey button is available if SBB-IS08E
is connected.
Go to Home Launch Button.
11
Quickly select frequently used functions.
Display information about the current input
source.
Move to the upper, lower, left or right menu,
or adjust an option's setting.
Confirm a menu selection.
Return to the previous menu.
Exit the current menu.
Manually select a connected input source
from DVI, HDMI, or DisplayPort.
It sets safe lock function.
Used in multimedia mode.
–– Remote control button functions
may differ for different products.
Press a button on the remote control
pointing at the sensor on the front
of the product to perform the
corresponding function.
–– Using other display devices in the
same space as the remote control
of this product can cause the other
display devices to be inadvertently
controlled.
To place batteries in the remote control
Use the remote control within 7 m to
10 m from the sensor on the product at
an angle of 30 from the left and right.
–– Store used batteries out of reach of
children and recycle.
–– Do not use a new and used battery
together. Replace both batteries at
the same time.
–– Remove batteries when the remote
control is not to be used for an
extended period of time.
12
Remote Control (SBB-IS08E model only)
•• Connector : RJ45
Direct LAN cable (PC to HUB)
HUB
Cable Connection
LAN Cable
P2
•• Pin assignment
RJ45
P1
P1
P2
RJ45 MDC
1 2 3 4 5 6 7 8
Pin No
Standard Colour
Signal
1
White and orange
TX+
2
Orange
TX-
3
White and green
RX+
4
Blue
NC
5
White and blue
NC
6
Green
RX-
7
White and brown
NC
8
Brown
NC
Signal
P1
TX+
1
TX-
P2
Signal
<-------->
1
TX+
2
<-------->
2
TX-
RX+
3
<-------->
3
RX+
RX-
6
<-------->
6
RX-
13
Connection
Cross LAN cable (PC to PC)
•• Connection 1
RJ45
P1
P2
RJ45
Signal
P1
TX+
1
TX-
P2
Signal
<-------->
3
RX+
2
<-------->
6
RX-
RX+
3
<-------->
1
TX+
RX-
6
<-------->
2
TX-
HDBT OUT
HDBT IN
HDBT OUT
HDBT IN
HDBT IN
UART OUT
UART IN
•• Connection 2
RJ45
HDBT OUT
14
Control Codes
Viewing control state (Get control command)
Header
Command
0xAA
Command
type
ID
Data length
Checksum
0
Command
0xAA
Command
type
ID
Command
0xAA
0x11
Header
Command
0xAA
0x11
ID
ID
Data length
Data 1
1
"Power"
Data length
Data 1
1
1
Checksum
12
•• To control all devices connected by a serial cable simultaneously irrespective of IDs, set
the ID as "0xFE" and transmit commands. Commands will be executed by each device but
ACK will not respond.
Controlling (Set control command)
Header
Header
Data length
Data
1
Value
Checksum
Command
No.
Command type
Command
Value range
1
Power control
0x11
0~1
2
Input source control
0x14
-
3
Screen mode control
0x18
-
4
Safety Lock
0x5D
0~1
•• All communications take place in hexadecimals. The checksum is calculated by adding
up all values except the header. If a checksum adds up to be more than 2 digits as shown
below (11+FF+01+01=112), the first digit is removed.
E.g. Power On & ID=0
15
Power control
Input source control
•• Function
A product can be powered on and off using a PC.
•• Function
The input source of a product can be changed using a PC.
•• Viewing power state (Get Power ON / OFF Status)
•• Viewing input source state (Get Input Source Status)
Header
Command
0xAA
0x11
ID
Data length
Checksum
0
•• Setting power ON/Off (Set Power ON / OFF)
Header
Command
0xAA
0x11
ID
Data length
Data
1
"Power"
Checksum
0: Power OFF
•• Ack
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'A'
0x11
"Power"
Checksum
"Power": Power code to be set on a product.
•• Nak
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'N'
0x11
"ERR"
"ERR" : A code showing what error has occurred.
0xAA
0x14
ID
Data length
Checksum
0
Header
Command
0xAA
0x14
ID
Data length
Data
1
"Input Source"
Checksum
"Input Source": An input source code to be set on a product.
1: Power ON
Command
Command
•• Setting the input source (Set Input Source)
"Power": Power code to be set on a product.
Header
Header
Checksum
0x0C
Input source
0x20
MagicInfo
0x1F
DVI_video
0x21
HDMI1
0x22
HDMI1_PC
0x25
DisplayPort
――Items "DVI_video" and "HDMI1_PC" are not compatible with "Set" commands. They only
respond to "Get" commands.
――This model does not support HDMI1 and HDMI1_PC.
――MagicInfo is only available with models that contain the MagicInfo function.
16
•• Ack
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'A'
0x14
"Input
Source"
Checksum
•• Nak
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'N'
0x14
"ERR"
Wide Zoom
0x0B
4:3
•• Ack
"Input Source": An input source code to be set on a product.
Header
0x31
Checksum
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x18
"Screen
Mode"
Checksum
"Screen Mode": A code that sets the product status
•• Nak
"ERR" : A code showing what error has occurred.
Screen mode control
•• Function
The screen mode of a product can be changed using a PC.
Screen mode cannot be controlled when the Video Wall function is enabled.
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'N'
0x18
"ERR"
Checksum
"ERR": A code showing what error has occurred
•• Viewing screen status (Get Screen Mode Status)
Header
Command
0xAA
0x18
ID
Data length
Checksum
0
•• Setting the picture size (Set Picture Size)
Header
Command
0xAA
0x18
ID
Data
length
Data
1
"Screen
Mode"
Checksum
"Screen Mode": A code that sets the product status
0x01
16 : 9
0x04
Zoom
17
Safety Lock
•• Function
PC can be used to turn the Safety Lock function on or off on a product.
This control is available regardless of whether or not the power is turned on.
•• Viewing the safety lock state (Get Safety Lock Status)
Header
Command
0xAA
0x5D
ID
Data length
Checksum
0
•• Enabling or disabling safety lock (Set Safety Lock Enable / Disable)
Header
Command
0xAA
0x5D
ID
Data length
Data
1
"Safety
Lock"
Checksum
"Safety Lock": Safety lock code to be set on a product
1: ON
0: OFF
•• Ack
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x5D
"Safety Lock"
Checksum
"Safety Lock": Safety lock code to be set on a product
•• Nak
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'N'
0x5D
"ERR"
Checksum
"ERR": A code showing what error has occurred
18
Chapter 03
Connecting and using devices
Before Connecting
Connection using a DVI cable
Pre-connection Checkpoints
――Before connecting a source device, read the user manual provided with it.
The number and locations of ports on source devices may differ from device to device.
DVI IN
――Do not connect the power cable until all connections are completed.
Connecting the power cable during connection may damage the product.
――Check the types of ports at the back of the product you want to connect.
Connecting to a PC
――You can use the DVI port on the product as an HDMI port by using a DVI-HDMI adapter.
•• Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
•• A PC can be connected to the product in a variety of ways.
Select a connection method suitable for your PC.
――Connecting parts may differ in different products.
DVI IN
19
Connection Using a DVI-HDMI Cable
Connection Using an HDMI-DVI Cable
To properly display images from the computer that is connected to the product via an HDMI-DVI
cable, make sure to configure the settings as follows.
•• Picture → set each screen mode to Text under Picture Mode
•• System → General → set HDMI Hot Plug to Off
DVI IN
HDMI IN
Connection Using an HDMI Cable
HDMI IN
20
Connection Using an DP Cable
DP IN
•• Precautions for using DP
――To increase the standby power capacity, the product stops DP communication when it is
turned off or in power-saving mode.
If the product in dual monitor mode is turned off or goes into power-saving mode, monitor
setting changes may not be updated. As a result, screen output may not be displayed
properly.
In the occurrence of this issue, set Max. Power Saving to Off before using the product.
――Some graphics cards that are not compliant with the DP standard may prevent the
Windows Booting/Bios screen from being displayed when the product is in power-saving
mode. If this is the case, make sure to turn on the product first before turning on your PC.
――The DisplayPort interface (DP IN) on the product and the provided DP cable are designed
based on the VESA standards. Using a DP cable that is not VESA compliant may cause the
product to function improperly. Samsung Electronics shall not be held responsible for any
issues from using a cable that is not VESA compliant.
Make sure to use a DP cable that is VESA compliant.
21
Connecting to a Video Device
•• Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
•• You can connect a video device to the product using a cable.
――Connecting parts may differ in different products.
――After connecting an external device, press the SOURCE button on either the remote control or SBB-IS08E to select the connected external device.
Connection Using an HDMI-DVI Cable
――To properly play content saved on a video device that is connected to the product via an HDMI-DVI cable, make sure to configure the settings as follows.
You can use the DVI port on the product as an HDMI port by using a DVI-HDMI adapter.
――Picture → set each screen mode to Videos/Images under Picture Mode
――System → General → set HDMI Hot Plug to On
――Supported resolutions include 1080p (50/60Hz), 720p (50/60Hz), 480p, and 576p.
HDMI IN
DVI IN
22
Connection Using an HDMI Cable
Connecting the LAN Cable
Using an HDMI cable or HDMI to DVI Cable (up to 1080p)
――Connecting parts may differ in different products.
•• For better picture and audio quality, connect to a digital device using an HDMI cable.
•• If the product is connected to an external device that is compatible with an older HDMI
version, the product may not display screen colours properly. It may also display a blank
screen.
If such a problem occurs, ask the manufacturer of the external device about the HDMI
version and, if out of date, request an upgrade.
RJ45
•• Be sure to use an HDMI cable with a thickness of 14 mm or less.
•• Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a
connection error may occur.
•• A basic high-speed HDMI cable or one with ethernet is recommended.
This product does not support the ethernet function via HDMI.
•• Use a cable of CAT 6 (*FTP type) or higher.
*FTP: Foiled Twisted Pair
――Connect to a HUB or router that supports the HDCP function.
HDMI IN
23
Installing the cabinets
Assembling the cabinets
――The colour and shape of parts may differ from what is shown. Specifications are subject to
change without notice to improve quality.
Removing the protective brackets
24
Replacing the cabinet module
1
2
LO
CK
K
LO
C
LO
CK
UN
UN
LO
C
K
5
UN
LO
C
LO
C
K
K
6
3
UN
LO
C
K
7
4
25
Precautions when handling the cabinets
[Caution to prevent external shock and dropping of the
product]
After removing the protective brackets, be careful not
to expose the product to external shocks or vibrations.
Make sure that the product is not dropped from any
height.
Be careful not to expose the product to vibrations or
external shocks when it is lying flat on the floor.
Restrictions when installing cabinets
For each SBB-IS08E, the following install configurations are possible: a maximum of 18 IL015E,
IS015F devices, a maximum of 32 IL020F, IS020F devices or a maximum of 50 IL025E, IS025F
devices.
To obtain Full HD 50/60 Hz picture quality, the following install configurations are possible:
IL015E, IS015F devices using a 3*6 layout, IL020F, IS020F devices using a 4*8 layout or IL025E,
IS025F devices using a 5*10 layout.
IL015E / IS015F
IL020F / IS020F
[Caution to prevent damage to corners]
Take extra care to ensure that the corners of a cabinet
do not get damaged.
After removing the protective brackets, do not place
the product on the floor with the LED facing down.
IL025E / IS025F
[Caution to prevent damage to the LED from static]
Do not touch the product without anti-static gloves.
26
Connecting to cabinets
――Connect SBB-IS08E to an external device, and then connect it to IL015E, IL020F, IL025E,
IS015F, IS020F or IS025F devices.
――Connecting parts may differ in different products.
•• Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
•• Connect HDBT cables, and then connect DP or stereo cables according to the following
steps.
HDBT
DP / UART
Connection 1
Connection 2-1
Connecting HDBT cables
Connecting DP cables for redundancy
SBB-IS08E
HDBT OUT
First cabinet
HDBT IN
HDBT OUT
Last cabinet
SBB-IS08E
HDBT IN
HDBT OUT
First cabinet
HDBT IN
DP OUT
Last cabinet
DP IN
•• If another display is connected to the DP OUT port on a cabinet, the screen may not display
properly.
•• The DP port is provided as a redundant port to be used if an issue occurs under a connection
established via the HDBT port.
27
Connection 2-2
Connecting RS232C cables for redundancy
SBB-IS08E
RJ45
HDBT OUT
First cabinet
HDBT IN
UART OUT
Last cabinet
UART IN
Recommended number of devices for connection for
each input voltage
•• If using 110 V, you can connect at most 3 IL015E, IS015F devices, 3 IL020F, IS020F devices or
4 IL025E, IS025F devices.
•• If using 220 V, connect a maximum of four cabinets, irrespective of the cabinet models.
――Exceeding the recommended maximum number of devices can cause the circuit breaker of
the product to trigger due to overload.
First cabinet
POWER
Last cabinet
POWER
――Cabinets connected to the same network can only be controlled.
28
Changing the Input source
Source allows you to select a variety of sources and change source device names.
Source
select the connected external device.
――The screen may not display correctly if an incorrect source is selected for the source device you want to convert
SOURCE → Source
You can display the screen of a source device connected to the product. Select a source from source list to display
the screen of the selected source.
――After connecting an external device, press the SOURCE button on either the remote control or SBB-IS08E to
to.
――To view detailed information about connected source devices, press the TOOLS button from the Source page.
Source
Edit Name
MagicInfo S
USB
HDMI
DisplayPort
DVI
To go to Options, press and hold the Enter button.
SOURCE → Source → TOOLS → Edit Name → ENTER E
Customise the name of a connected external device.
――The list can include the following source devices. Source devices on the list differ depending on the selected
source.
PC / Cable STB / Satellite STB / PVR STB / Game / Blu-ray / DVD / VCR / AV Receiver / Camcorder / DVI PC / DVI
Devices / TV / IPTV / HD DVD / DMA
Information
–– The displayed image may differ depending on the model.
SOURCE → Source → TOOLS → Information → ENTER E
You can see detailed information about the selected external device.
29
Chapter 04
Using LED Signage Manager
The LED Signage Manager software allows you to easily control multiple display devices from your computer.
For details on how to use the LED Signage Manager software, refer to the Help after installing the software. The LED Signage Manager software is available on the website.
――The installation process for LED Signage Manager may be affected by the graphics card, motherboard, and network environment.
――Make sure that Windows 7 or higher and Microsoft .NET Framework 4.5 are installed on the computer, before installing LED Signage Manager.
30
Chapter 05
Home feature
This feature is provided in Support → Go to Home.
Accessible using the HOME button on the remote control.
――To use the Player feature, set Play via to MagicInfo in System.
Player
HOME
Play a range of content such as channels with schedules assigned, templates or files.
Play channels or content using any of the following methods.
→ Player →ENTER E
•• Network Channel: Play content using the server.
――To run Network Channel, make sure the product is connected to the server.
Signage Player
•• Local Channel: Play content in internal memory or from external memory.
Player
Play a variety of content, such as
scheduled channels, templates or
files.
Schedule
Template
Clone Product
ID Settings
Network Status
On/Off Timer
Ticker
More settings
–– The displayed image may differ depending on the model.
31
Approving a connected device from the server
3
Select Device from the top menu bar.
4
Select Lite from the menus on the left.
5
Select Unapproved from the sub-menus of Lite.
6
Select the Approve button for your device from the list of unapproved Lite devices.
Approving the Lite server
•• Set MagicInfo Mode to Lite in Server Network Settings.
Approve and use the Lite server now.
――First configure the server Network Settings before device approval.
1
2
Access the server you have assigned to your device.
Enter your ID and password to log in.
32
7
Enter the information required to approve the device.
9
When the device is approved by the server, the schedule registered in the selected group
will be downloaded to the device. The schedule will run after it is downloaded.
――For further details on how to configure a schedule, refer to the <MagicInfo Lite Server user's
manual>.
――If a device is deleted from the list of devices approved by the server, the device will reboot to
reset its settings.
Setting the current time
A schedule may not run if the time set on the device is different from the server's current time.
•• Device Name: Enter the device name.
•• Device Group: Select
1
Go to the tabs Device → Time.
2
Select your device.
3
Select Clock Set, and sync the time with the server.
to specify the group.
•• Location: Enter the current location of the device.
――Pressing the INFO button on the remote when a network schedule is running will display
the details of the schedule. Check that the correct device has been selected by viewing the
device ID in the details.
8
Select the All menu to check that the device has been registered.
•• When connecting to the server for the first time, the time on the product is set using the
GMT time of the region where the server is installed.
•• The time on the product can be changed from the server as shown in step 3.
•• Turning the product off and then on again will restore the time setting on the product to
the last time that was set from the server.
――For further details on how to manage the time (scheduling, holiday management, etc.), refer
to the <MagicInfo Lite Server user's manual>.
33
Approving the Premium server
3
Select Device from the top menu bar.
4
Select Premium from the menus on the left.
5
Select Unapproved from the sub-menus of Premium.
6
Select the Approve button for your device from the list of unapproved Premium devices.
•• Set MagicInfo Mode to Premium in Server Network Settings.
Approve and use the Premium server now.
――First configure the server Network Settings before device approval.
1
2
Access the server you have assigned to your device.
Enter your ID and password to log in.
34
7
Enter the information required to approve the device.
9
When the device is approved by the server, the schedule registered in the selected group
will be downloaded to the device. The schedule will run after it is downloaded.
――For further details on how to configure a schedule, refer to the <MagicInfo Premium Server
user's manual>.
――If a device is deleted from the list of devices approved by the server, the device will reboot to
reset its settings.
Setting the current time
A schedule may not run if the time set on the device is different from the server's current time.
•• Device Name: Enter the device name.
•• Device Group: Select
1
Go to the tabs Device → Time.
2
Select your device.
3
Select Clock Set, and sync the time with the server.
to specify the group.
•• Location: Enter the current location of the device.
――Pressing the INFO button on the remote when a network schedule is running will display
the details of the schedule. Check that the correct device has been selected by viewing the
device ID in the details.
8
Select the All menu to check that the device has been registered.
•• When connecting to the server for the first time, the time on the product is set using the
GMT time of the region where the server is installed.
•• The time on the product can be changed from the server as shown in step 3.
•• Turning the product off and then on again will restore the time setting on the product to
the last time that was set from the server.
――For further details on how to manage the time (scheduling, holiday management, etc.), refer
to the <MagicInfo Premium Server user's manual>.
35
Device : All
Player
Content : All
Sort by : File Name
Browse and play content stored on the selected device.
No channels
Network Channel
My Templates
Options
1 / 4 item(s)
Network Channel
Play content, templates and schedules configured on the server.
•• You can view whether the server is connected (approval) in the Player menu screen.
To view whether the server is connected when a Network Channel is running, press INFO on the remote.
1
No channels
Select Network Channel from the Player menu.
――The No channels message appears if no channel has been registered in Network Channel.
Local Channel
2
Network Channel will run.
Network File
–– The displayed image may differ depending on the model.
Local Channel
Play a schedule or channel that was configured in the product.
1
Select Local Channel from the Player menu.
――The No channels message appears if no channel has been registered in Local Channel.
2
Local Channel will run.
Network File
Content files included in schedules that have been downloaded through MagicInfo Server are displayed.
My Templates
Play a template in My Templates stored in the internal memory of the product.
36
Available features in the Player page
The Player list page provides the following features.
•• Device
Select either Internal or USB to search for a desired device list.
–– All / Internal / USB
•• Content
Select a content type as criterion to search for a desired content list.
–– All / Video / Image / PDF / Flash / Office / My Templates
•• Sort by
Specify the content sort criterion.
–– File name / Recently played
•• Options
Menu items in the Player page
Option Name
Operations
Play Selected
Select and play desired content.
Send
Copy content to another storage device.
Delete
Delete desired content.
Settings
Configure detailed properties of content.
――See the following page for details on the Settings feature.
37
Player page Settings menu
Default Storage
Select the storage location that you want to download scheduled channels from the network to.
Settings
•• Internal / USB
Picture Size
Settings
Set the screen size for content.
Select the storage location that you want to download scheduled
channels from the network to.
Default Storage
If Picture Size is set to Video or Image
•• Full Screen / Original Size / Screen Fit
Internal
Picture Size
Close
Display Duration
Transition Effect
Content Orientation
Random
If Picture Size is set to PDF or Office
•• Full Screen / Original Size
――This feature is only available for Video, Image, PDF and Office files.
Landscape
Display Duration
–– The displayed image may differ depending on the model.
Set the duration for each page in a slideshow.
――This feature is only available for Image, PDF, Flash and Office files.
Transition Effect
Configure transition effects between pages or scenes in a slideshow or video file.
•• None / Fade1 / Fade2 / Blind / Spiral / Checker / Linear / Stairs / Wipe / Random
――This feature is only available for Image files.
Content Orientation
Switch the orientation of playing content to Landscape or Portrait mode.
•• Landscape / Portrait
――If Content Orientation is Portrait view, it does not support VP8 video codec.
38
Default content
This default content will be displayed if you run a channel while no programmes are scheduled on the channel.
•• None / My Templates
Safely Remove
Safely removes USB memory
Reset
Restore all the values under Settings to the default when the product was purchased.
39
When Content is Running
Press the INFO button on the remote control.
•• Current time
Viewing the details of the content that is running
•• CH Number: Number assigned to the channel currently playing
――Only applicable during Network Channel / Local Channel playback.
Information
Current time
Type:
No channels selected
CH Name:
No channels selected
Software Version:
•• CH Name: Name of the channel currently playing
――Only applicable during Network Channel / Local Channel playback.
00:00pm
Network Channel
CH Number:
•• Type: Type of channel currently playing
――Only applicable during Network Channel / Local Channel playback.
•• Software Version: Displays the software version of a device
•• MAC ID: Displays the original identification number of a device
DTP-EP-APP-5617-Release
OK
No Schedule to download
•• Tags: Tag settings assigned to a device from the server
――Only applicable during Network Channel / Local Channel playback.
•• Server: Displays the connection status (Connected, Not connected or Not approved) of the server
•• USB: Displays the connection status of a USB device
–– The displayed image may differ depending on the model.
40
Changing the settings for the content that is
running
Press the TOOLS button on the remote control during content playback to configure settings such as Playlist and
Repeat.
•• Playlist
View a list of content items currently playing.
•• Repeat
Set the repeat mode.
–– One / All
Playlist
Music
Repeat
–– The displayed image may differ depending on the model.
–– SBB-IS08E does not support the sound function.
41
File Formats Compatible with Player
•• Supported file systems include FAT32 and NTFS.
•• A file with a vertical and horizontal resolution larger than the maximum resolution
cannot be played.
Check the vertical and horizontal resolution of the file.
•• Check supported video codec types and versions.
•• Check the supported file versions.
–– Flash player 11.0 and older and Flash Air 3.0 and older versions are supported.
–– PowerPoint version up to 97 – 2007 is supported
•• Only the last USB device that was connected is recognised.
Network Schedule Multiframe
Template files and LFD(.lfd) files
Restrictions
•• Ensure a distributed folder (content / schedules) exists in Internal / USB memory.
Playback restrictions
•• A maximum of two video (Video) files can be played.
•• More than one Flash file cannot be played.
•• For Office files (PPT and Word files) and PDF files, only one file type is supported at a
time.
•• Multiple videos (Video) cannot be played on a single display of a video wall
simultaneously.
Playback restrictions
•• A maximum of two video files (Video) can be played simultaneously.
•• For video files with vertical dimensions of 1080p or larger, only one file can be played at
a time.
•• The maximum number of 4096 x 4096-dimension image files that can be played
simultaneously from a media slide is four.
•• More than one Flash file cannot be played.
•• If an input source element is included, only one video file or media slide can be played
simultaneously.
•• In a combination of "video files + Flash files + input source elements," supported
combinations of different content files that can simultaneously play are as follows:
–– Video + Flash
–– Video + input source element
–– Flash + input source element
•• For Office files (PPT and Word files) and PDF files, only one file type is supported at a
time.
•• LFD(.lfd) files are not supported.
42
Contents
File Extension
Container
*.avi
AVI
*.mkv
MKV
*.asf
ASF
*.wmv
MP4
*.mp4
3GP
*.mov
VRO
*.3gp
VOB
*.vro
PS
*.mpg
TS
Video Codec
DivX 3.11 / 4.x / 5.x / 6.x
Resolution
1920 x 1080
Frame rate
(fps)
6~30
Bit rate
(Mbps)
30
MPEG4 SP / ASP
H.264 BP / MP / HP
Motion JPEG
*.mpeg
*.ts
Window Media Video v9
*.tp
*.trp
MPEG2
*.flv
*.vob
*.svi
MPEG1
*.m2ts
*.mts
VP6
640 x 480
4
*.divx
43
Video
•• 3D video is not supported.
•• Content with a resolution larger than the resolution specified in the
table above is not supported.
•• Video content with a Bit rate or Frame rate larger than the rate
specified in the table above can cause choppy video during playback.
•• Video content will not play, or not play correctly, if there is an error in
the content or the container.
Image
•• Compatible image file format : JPEG, PNG, BMP
――32-bit, 24-bit and 8-bit BMP files are supported.
•• Supported maximum resolution : 4096 x 4096
•• Supported maximum file size: 20MB
•• Supported image effects : 9 effects
(Fade1, Fade2, Blind, Spiral, Checker, Linear, Stairs, Wipe, Random)
•• Some USB/digital camera devices may not be compatible with the
player.
•• Supports up to H.264, Level 4.1
•• H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not
supported.
•• For all Video codecs except MVC, VP8, VP6:
–– Below 1280 x 720: 60 frame max
–– Above 1280 x 720: 30 frame max
•• GMC 2 or higher is not supported.
•• Supports only BD MVC Spec.
•• Only one video file can play at a time if video files on the monitor use
incompatible codecs or the resolution is 1080 x 1920.
•• When a single video file is playing, Seamless mode is not supported
under the following conditions:
–– Incompatible codec (MVC, VP3, MJPEG) ↔ Incompatible codec
–– Incompatible codec ↔ Compatible codec
–– The resolution is different from that of the monitor
–– The frequency is different from that of the monitor
44
Flash
Power Point
•• Flash player 11.0 and older and Flash Air 3.0
and older versions are supported.
•• Flash Animation
–– Compatible file format : SWF
•• Recommended resolution : 1280 x 720
–– Caution
Performance comparable to Flash Player
on a Windows operating system cannot
be guaranteed
Optimisation is needed during content
creation
•• Flash Video
–– Compatible file format : FLV
–– Video
Codec : H.264 BP
Resolution : 1920 x 1080
–– Caution
F4V file format is not supported
Screen Video is not supported
•• Compatible document file formats
–– Extension : ppt, pptx
–– Version : Office 97 ~ Office 2007
•• Functions not supported
–– Animation effect
–– 3D shapes (which will be displayed in
2D)
–– Header and footer (some subitems are
not supported)
–– Word Art
–– Align
A group alignment error may occur
–– Office 2007
SmartArt is not fully supported. 97 out
of 115 subitems are supported.
––
––
––
––
––
PDF
•• Compatible document file formats
–– Extension : pdf
•• Functions not supported
–– Content less than 1 pixel not supported
because of performance degradation
issue.
–– Masked Image, Tiled Image content not
supported.
–– Content with Rotated Text, not
supported.
–– 3D Shadow Effects not supported.
–– Some characters not supported
(Special characters may be corrupted)
Object insertion
Half-width characters
Letter spacing
Charts
Vertical text
some subitems are not supported
–– Slide notes and handout
45
WORD
Template files
•• Compatible document file formats
–– Extension : .doc, .docx
–– Version : Office 97 ~ Office 2007
•• Functions not supported
–– Page background effect
–– Some paragraph styles
–– Word Art
–– Align
A group alignment error may occur
•• Creation/editing/
playback are only
available in Template.
LFD
Streaming
•• Supported in Network
Channel and Local
Channel
•• Supported streaming
protocols: mms, RTP,
HTTP
•• Compatible document
file formats
–– Extension : .lfd
•• Only video content is
supported
–– 3D shapes (which will be displayed in
2D)
–– Office 2007
SmartArt is not fully supported. 97 out
of 115 subitems are supported.
––
––
––
––
Charts
Half-width characters
Letter spacing
Vertical text
some subitems are not supported
–– Slide notes and handout
46
Schedule
Available features in the Schedule page
The Schedule page provides the following features.
HOME
→ Schedule → ENTER E
Schedule
Type : Local
Device : Internal
Options
Schedule your content on a local channel or edit existing channels.
Playing Time
[CH1]Channel 1
[CH2]Channel 2
[CH3]Channel 3
12:00 am
12:30 am
Add content to create
a programme on the
channel.
01:30 am
02:00 am
02:30 am
03:30 am
04:00 am
04:30 am
05:00 am
05:30 am
06:00 am
•• Device
–– Display the name of a connected storage device.
――This option only activates if Type is set to Local in Device.
•• Options
01:00 am
03:00 am
•• Type
–– Local: Add or edit schedules.
–– Network: View the network schedule configured on the server.
+ Add Programme
Schedule your content
on CH 2.
Schedule your content
on CH 3.
Configure the display
duration to set how
long each item of
content will play for.
Set a start time and
a stop time for the
programme.
Menu items in the Schedule page
Option Name
Operations
Send
Send configured schedules to another storage device. This is similar to the "copy"
feature on PCs.
Delete
Delete schedules.
47
Configuring channel schedules
Play media content, such as a video or photo, at a specified time.
1
Select a channel to configure.
2
Select the video or photo you want to apply to the channel schedule.
3
Set the time to play the schedule. (Start Time ~ Stop Time)
4
Change the channel schedule name, and then select a destination folder to save to.
5
Press the Save button.
――Only applicable when Type is set to Local.
Editing a channel schedule.
Change settings for a configured channel schedule such as content, the duration and the schedule name.
1
Select a channel to edit.
2
From a channel schedule, select the video or photo you want to edit.
–– Deleting content: Place the cursor over the desired content and then press the E button to delete it.
–– Move to the far right end of the content list. Click the + button to add content or change the playback order of content items.
3
Set the time to play the schedule. (Start Time ~ Stop Time)
4
Change the channel schedule name, and then select a destination folder to save to.
5
Press the Save button.
――Only applicable when Type is set to Local.
48
Template
HOME
Available features in the Template page
Create unique content using templates. It is easy to create content. Simply change images and
text in a template.
→ Template → ENTER E
Template
Sort the template list using the following criteria.
Market : All
Orientation : Landscape
Select a template to customise.
My Templates
1 / 64 item(s)
•• Market
•• Orientation
–– Landscape: Select this mode when using the product in landscape orientation.
–– Portrait: Select this mode when using the product in portrait orientation.
1
Select a template from the provided sample templates.
Create Template
Select in the editable zone to add content or edit the existing text.
–– The displayed image may differ depending on the model.
Preview
Cancel
–– SBB-IS08E does not support the sound function.
Save
Background Screen
2
bg_co...
Background Music
Organise a template by inserting text, video, photo, or PDF files as desired.
49
Entering text
Inserting content such as videos, photos and PDF files
Create Template
Create Template
Press the volume button on the remote to
change the font size.
Select in the editable zone to add content or edit the existing text.
Select in the editable zone to add content or edit the existing text.
Edit
Item(s) selected
Select item to delete
Preview
Cancel
picture1.jpg
Edit Text
Font options
Save
Hide Element
Show
Default content duration
Background Screen
bg_co...
00:00:05
Mute
Done
Background Music
Edit Text
Aspect Ratio
Cancel
Configuring the background image/background music
Select the Edit Text window to enter text.
Font options
Font Size: Specify the text size for the message.
Font Colour: Specify the text colour for the message.
Create Template
Select in the editable zone to add content or edit the existing text.
Background Screen
Device : All
Background colour: Specify the background colour for the message.
Background opacity: Specify the background transparency for the message.
..
bg_common_02.jpg
bg_common_04.jpg
bg_common_03.jpg
bg_common_05.jpg
bg_common_06.jpg
bg_common_10.jpg
bg_commo
bg_common_07.jpg
bg_common_11.jpg
bg_commo
Alignment: Select a message alignment mode.
Scroll: Specify the scroll direction/speed for the message.
Hide Element: Display or hide a message.
――Selecting Hide does not reset the message settings.
bg_common_01.jpg
Done
Cancel
Reset: Reset all settings in Font options to default settings.
50
3
Preview
Configure Template Name and Storage.
Save
Duration
23:59:59
Template Name
Template preview is running. It will stop after
20 seconds.
Template01
Storage
Internal
Save
4
1
Preview the created template using the Preview feature.
2
To save the template, press the Save button.
Cancel
Press the Save button to finish creating the content.
51
Clone Product
Export settings on the product to an external storage device. You can also import settings from an external storage
device.
This option is useful when assigning the same settings to several products.
HOME
→ Clone Product → ENTER E
Clone Product
When a duplicate file is not found on the external storage device
1
Connect the external storage device, then run the Clone Product function.
2
The No cloning file found on the external storage device. Export this device's settings to the external storage
device? message appears.
–– The displayed image may differ depending on the model.
When a duplicate file is found on the external storage device
1
Connect the external storage device, then run the Clone Product function.
2
The Cloning file found. Please select an option. message appears.
Run the Import from External Storage or Export to External Storage function.
–– Import from External Storage: Copy settings saved on an external storage device to the product.
–– Export to External Storage: Copy settings on the product to an external storage device.
――After configuration is complete, the product is rebooted automatically.
52
ID Settings
HOME
→ ID Settings → ENTER E
ID Settings
Assign an ID to a set.
Device ID
Enter the ID number of the product connected to the input cable for input signal reception. (Range: 0~224)
――Press u/d to select a number, and press E.
――Enter the number you want using the number buttons on the remote control.
PC Connection Cable
–– The displayed image may differ depending on the model.
Select the cable currently connected to the computer and product.
•• RJ45(LAN) cable
Communicate with LED Signage Manager via the RJ45 cable.
Device ID Auto Set
Automatically assign an ID to the set connected via the RJ45 cable.
When multiple devices are connected, enable the feature on either the first or last device.
53
Network Status
HOME
Check the current network and Internet connection.
→ Network Status → ENTER E
Network Status
–– The displayed image may differ depending on the model.
54
On/Off Timer
HOME
→ On/Off Timer → ENTER E
――You must set Clock Set before you can use this feature.
On Timer
Set On Timer so that your product turns on automatically at a time and on a day of your choosing.
The product turns on according to the settings of the specified input source.
On/Off Timer
On Timer: Set the on timer by making a selection from one of the seven options. Ensure you set the current time
first.
(On Timer 1 ~ On Timer 7)
–– The displayed image may differ depending on the model.
•• Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.
If you select Manual, you can choose the days you want On Timer to turn on your product.
–– The check mark indicates days you’ve selected.
•• Time: Set the hour and minute. Use the number buttons or the up and down arrow keys to enter numbers. Use
the left and right arrow buttons to change entry fields.
•• Volume: Set the desired volume level. Use the left and right arrow buttons to change the volume level.
――SBB-IS08E does not support the sound function.
•• Source: Select the input source of your choice.
•• Content (when the Source is set to Internal/USB): From the connected USB device or the internal memory
device, select a folder containing the video or photo file that will be played when the product turns on.
――This function is available only when a USB device is connected.
――If there is only one photo file in the USB, the Slide Show will not play.
――If a folder name is too long, the folder cannot be selected.
――Each USB you use is assigned its own folder. When using more than one of the same type of USB, make sure the
folders assigned to each USB have different names.
――We recommend that you use a USB memory stick and a multi card reader when using On Timer.
――The On Timer function may not work with USB devices with a built-in battery, MP3 players, or PMPs made by
some manufacturers because the product can take too long to recognise these devices.
55
Off Timer
Set the off timer (Off Timer) by making a selection from one of the seven options. (Off Timer 1 ~ Off Timer 7)
•• Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.
If you select Manual, you can choose the days you want Off Timer to turn off your product.
–– The check mark indicates days you’ve selected.
•• Time: Set the hour and minute. Use the number buttons or the up and down arrow keys to enter numbers. Use
the left and right arrow buttons to change entry fields.
Holiday Management
Timer will be disabled during a period specified as a holiday.
•• Add Holiday: Specify the period you want to add as a holiday.
Select the start and end dates of the holiday you want to add using the u/d buttons, and click the Save
button.
The period will be added to the list of holidays.
–– Start: Set the start date of the holiday.
–– End: Set the end date of the holiday.
――Delete: Delete selected items from the list of holidays.
――Edit: Select a holiday item and then change the date.
•• Set Applied Timer: Set the On Timer and Off Timer to not activate on public holidays.
–– Press E to select the On Timer and Off Timer settings you do not want to activate.
–– The selected On Timer and Off Timer will not activate.
56
Ticker
HOME
→ Ticker → ENTER E
Input text while a video or image is displayed and display the text on the screen.
•• Off / On
•• Message: Enter a message to display on the screen.
•• Time: Set the Start Time and End Time to display a Message.
•• Font options: Specify the text font and colour for the message.
Ticker
•• Position: Select an orientation to display a Message.
•• Scroll: Specify the scroll Direction and Speed for the message.
•• Preview: Preview configured caption settings.
–– The displayed image may differ depending on the model.
57
More settings
HOME
The picture settings menu appears.
→ More settings → ENTER E
More settings
–– The displayed image may differ depending on the model.
58
URL Launcher
HOME
For details on how to use the URL Launcher feature, contact the dealer the product was purchased from.
――To use the URL Launcher feature, set Play via to URL Launcher in System.
→ URL Launcher → ENTER E
Signage Player
Change URL
pm
12:00
URL Launcher
January 1 2015
Clone Product
ID Settings
Network Status
On/Off Timer
Ticker
More settings
–– The displayed image may differ depending on the model.
59
Chapter 06
OSD (On Screen Display) menus
Screen Adjustment
Main menu
Sub menu
Settings
Picture
Picture Mode
Shops & Shopping Centres /
Offices & Schools / Terminals &
Stations / Video Wall
Contrast / Brightness /
Sharpness / Colour / Tint (G/R)
Description
Select a picture mode (Picture Mode) suitable for the environment where the product will be used.
Videos/Images mode improves the picture quality of the video device. Text mode improves the picture
quality of the computer.
Your product has several options for adjusting picture quality.
――When you make changes to Contrast, Brightness, Sharpness, Colour or Tint (G/R), the OSD will be
adjusted accordingly.
――You can adjust and store settings for each external device you have connected to an input on the
product.
――Lowering picture brightness reduces power consumption.
Colour Temperature
White Balance
Adjust the colour temperature (Red / Green / Blue). (Range: 2800K–10000K)
――Enabled when Colour Tone is set to Off.
2 Point
Adjust the colour temperature for a more natural picture.
10 Point
Controls the white balance in 10 point interval by adjusting the red, green, and blue brightness.
――Some external devices may not support this function.
――Enabled when Picture Mode is set to Offices & Schools (Videos/Images).
Gamma
Adjust the primary colour intensity.
60
Main menu
Sub menu
Settings
Advanced Settings
Dynamic Contrast
Adjust the screen contrast.
Black Tone
Select the black level to adjust the screen depth.
Flesh Tone
Emphasise pink Flesh Tone.
RGB Only Mode
Displays the Red, Green and Blue colour for making fine adjustments to the hue and saturation.
Colour Space
Adjusts the range and variety of colours (the colour space) available to create images.
――To adjust Colour, Red, Green, Blue and Reset, set Colour Space to Custom.
Motion Lighting
Reduces power consumption by reducing screen brightness when the picture on the screen is in
motion.
――Enabled when Picture Mode is set to Terminals & Stations (Videos/Images).
Colour Tone
――Settings can be adjusted and stored for each external device connected to an input on the product.
Digital Clean View
If the broadcast signal received by your product is weak, you can activate the Digital Clean View feature
to reduce any static and ghosting that may appear on the screen.
――Received signal intensity is the strongest when the bar is green.
Picture Options
Description
――When the signal is weak, try all the options until the the product displays the best picture.
MPEG Noise Filter
Reduces MPEG noise to provide improved picture quality.
HDMI Black Level
Selects the black level on the screen to adjust the screen depth.
Film Mode
This mode is suitable to view movies.
Sets the product to automatically sense and process film signals from all sources and adjust the
picture for optimum quality.
――Available in HDMI (1080i).
61
Main menu
Sub menu
Settings
Description
Picture Size
Picture Size
Choose size and aspect ratio picture displayed on screen.
Position
Adjusts the picture position. Position is only available if Picture Size is set to Zoom1, Zoom2, Screen Fit
or Custom.
――To use the Position function after selecting Zoom1, Zoom2, Screen Fit or Custom, follow these steps.
Zoom/Position
Adjusts the picture zoom and position. This option is available when the input source is set to HDMI
(1080i/1080p) , DVI or DisplayPort. Picture Size must be set to Custom for the option to be available.
――Custom under Picture Size is only enabled when Picture Mode is set to Videos/Images while in DVI
or DisplayPort mode.
――If you want to reset the picture to its original position, select Reset in the Zoom/Position screen.
――The picture will be set to its default position.
62
OnScreen Display
Main menu
Sub menu
Settings
OnScreen Display
Message Display
Source Info
Select whether to display the source OSD when the input source changes.
No Signal Message
Select whether to display the no-signal OSD when no signal is detected.
MDC Message
Display or hide the MDC OSD when controlling devices using LED Signage Manager.
Download Status Message
Select to display the status when downloading content from a server or other device.
Menu Language
Description
Set the menu language.
――A change to the language setting will only be applied to the onscreen menu display. It will not be
applied to other functions on your PC.
Reset OnScreen Display
This option returns the current settings under OnScreen Display to the default factory settings.
63
Network
Network Status
Network Settings
MENU m → Network → Network Status → ENTER E
MENU m → Network → Network Settings → ENTER E
You can check the current network and Internet status.
Configure network settings to use various smart hub features such as Internet search, content
sharing through a home network and feature updates.
Network Status
Wired network and Internet connection settings complete.
Network Settings
Select your network type.
Network type
You are connected to the Internet. If you have any problems using online services,
please contact your Internet service provider.
IP Settings
Retry
Wired
Connect
You can connect your
Device to the internet.
Close
–– The displayed image may differ depending on the model.
–– The displayed image may differ depending on the model.
Network type
•• Wired
64
Network Settings (Wired)
•• Depending on how your network is configured, you may be able to attach your product to
your LAN by connecting the LAN port on the back of your product directly to a network
wall outlet using a LAN cable.
See the diagram below. Note that the wall outlet is attached to a modem or router
elsewhere in your house.
Connecting to a Wired Network
There are three ways to attach your product to your LAN using cable.
•• You can attach your product to your LAN by connecting the LAN port on the back of your
product to an external modem using a LAN cable.
See the diagram below.
LAN
The LAN Port on the Wall
RJ45
LAN
External Modem
(ADSL / VDSL)
The Modem Port on the Wall
RJ45
LAN Cable
Modem Cable
LAN Cable
•• You can attach your product to your LAN by connecting the LAN port on the back of your
product to an IP Sharer which is connected to an external modem. Use LAN cable for the
connection. See the diagram below.
LAN
The Modem Port on the Wall
External Modem
(ADSL / VDSL)
IP Sharer
(having DHCP server)
RJ45
If you have a Dynamic Network, you should use an ADSL modem or router that supports
the Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP
automatically provide the IP address, subnet mask, gateway, and DNS values your product
needs to access the Internet so you do not have to enter them manually. Most home networks
are Dynamic Networks.
Some networks require a Static IP address. If your network requires a Static IP address, you
must enter the IP address, subnet mask, gateway, and DNS values manually on your product
Cable Setup Screen when you set up the network connection. To get the IP address, subnet
mask, gateway, and DNS values, contact your Internet Service Provider (ISP).
If you have a Windows computer, you can also get these values through your computer.
――You can use ADSL modems that support DHCP if your network requires a Static IP address.
――ADSL modems that support DHCP also let you use Static IP addresses.
Modem Cable
LAN Cable
LAN Cable
65
Set the network connection to use Internet services such as perform software upgrades.
2
In the pop-up menu that appears, click Status.
Automatic Network Settings (Wired)
3
On the dialog that appears, click the Support tab.
4
On the Support Tab, click the Details button. The Network connection values are
Connect to the network using a LAN cable.
Make sure a LAN cable is connected first.
displayed.
How to set up automatically
1
Set Network type to Wired from the Network Settings page.
2
Press the Connect button to start Network Settings.
–– The Connect button is only enabled when the LAN cable is properly connected.
3
The network test screen appears and verifies the network connection.
When the connection has been verified, the “Wired network and Internet connection
completed.” message appears.
――If the connection process fails, check the LAN port connection.
――If the automatic process cannot find the network connection values or if you want to set the
connection manually, go to the next section, network setup.
Manual Network Settings (Wired)
How to set up manually
1
Set Network type to Wired from the Network Settings page.
2
Press the Connect button to start Network Settings.
–– The Connect button is only enabled when the LAN cable is properly connected.
3
verification process stops.
4
Select IP Settings on network connection screen. The IP Settings screen appears.
5
Select the field at the top, press E, and then set IP settings to Enter manually. Repeat
the entry process for each field in the IP Address.
Offices may use static IP addresses.
If this is the case, ask the network administrator for the IP address, subnet mask, gateway and
DNS server address. Enter these values manually.
Getting the Network Connection Values
――Setting IP settings to Enter manually automatically changes DNS setting to Enter
manually.
6
Right click the Network icon on the bottom right of the screen.
When done, select OK at the bottom of the page, and then press E. The network test
screen appears and the verification process starts.
To view the Network connection values on most Windows computers, follow these steps.
1
The network test screen appears and the verification process starts. Press Stop. The
7
When the connection has been verified, the “Wired network and Internet connection
completed.” message appears.
66
Multimedia Device Settings
Device Name
MENU m → Network → Multimedia Device Settings → ENTER E
MENU m → Network → Device Name → ENTER E
Allow other devices such as smart phones and tablets on your network, to share content with
your product.
Select or enter a device name.
Server Network Settings
This name can be shown on network remote controls over the network.
•• [VideoWall]Player1 ~ 6 / User Input
MENU m → Network → Server Network Settings → ENTER E
Connect to server
To run Player connect to a network.
•• Server Address / SSL / Port
――If the SSL option is enabled, the server is configured to use https and data transfer is
encrypted.
――Enter the server IP address and port number. Use 7001 as the port number. (If unable to
connect to the server using port number 7001, check with your server administrator to find
the correct port number and then change the port number.)
MagicInfo Mode
Select the appropriate MagicInfo Mode depending on the environment where you are using the
product.
•• Lite / Premium
Server Access
Select a method to connect the server network.
•• Allow / Deny
FTP Mode
Specify the FTP operating mode.
•• Active / Passive
67
System
Main menu
Sub menu
System
Setup
Settings
Description
Go through the initial setup steps like you did the first time you used this product.
――Enter your 4 digit PIN number. The default PIN number is “0-0-0-0".
If you want to change the PIN number, use the Change PIN function.
Time
Clock Set
Select Clock Set. Select Date or Time, and then press E.
Use the number buttons to enter numbers or press the up and down arrow buttons. Use the left and
right arrow buttons to move from one entry field to the next. Press E when done.
――You can set the Date and Time directly by pressing the number buttons on the remote control.
DST
Switches the DST (Daylight Saving Time) function on or off.
――Start Date, End Date and Time Offset are enabled only when DST is set to Manual.
Sleep Timer
Automatically shuts off the product after a preset period of time.
――Use the up and down arrows to select a period of time, and then press E. To cancel Sleep Timer,
select Off.
Auto Source Switching
Auto Source Switching
When the Auto Source Switching is On, the display video source will automatically be searched for
active video.
The Primary Source selection will be activated, if the current video source is not recognised.
Secondary Source selection will become active, if no primary video source is available.
If both the primary and secondary input sources are not recognised, the display will perform two
searches for an active source, each search checking the primary and then secondary source. If both
searches fail, the display will return to the first video source and display a message indicating that
there is no signal.
When the Primary Source selection is set to All, the display will search all the video source inputs twice
in sequence looking for an active video source, returning back to the first video source in the sequence
if no video is found.
Primary Source Recovery
Select whether to restore the selected primary input source when a primary input source is connected.
――The Primary Source Recovery function is disabled if Primary Source is set to All.
68
Main menu
Sub menu
Power Control
Eco Solution
Settings
Description
Primary Source
Specify Primary Source for the automatic input source.
Secondary Source
Specify Secondary Source for the automatic input source.
――The Secondary Source function is disabled if Primary Source is set to All.
Auto Power On
This feature automatically turns on the product as soon as it is plugged in. Pressing the power button
is not needed.
Max. Power Saving
Turns off the product to reduce power consumption after the PC has been left idle for a specified period
of time.
Standby Control
You can set the screen standby mode to be applied when an input signal is received.
Network Standby
This feature keeps the network power on when the product turns off.
No Signal Power Off
Save power by turning the device off when no signal is received from any source.
――Disabled when an attached PC is in power saving mode.
――The product will automatically power off at a specified time. The time can be changed as required.
Device Manager
Play via
Auto Power Off
The product will automatically turn off if you don’t press a button on the remote or touch a button on
product front panel within select hours to prevent overheating.
Keyboard Settings
Connecting a keyboard to the product displays the Keyboard Settings menu.
Mouse Settings
Connecting a mouse to the product displays the Mouse Settings menu.
Pointer Settings
Specify the pointer size, speed and shape.
Select the appropriate Play via mode depending on the environment where you are using the product.
The home screen may be different depending on the setting.
Change PIN
The Change PIN screen will appear.
Choose any 4 digits for your PIN and enter it in Enter New PIN. Reenter the same 4 digits in Confirm
New PIN.
When the Confirm screen disappears, press the Close button. The product has memorised your new
PIN.
――Default password: 0 - 0 - 0 - 0
69
Main menu
Sub menu
Settings
Security
Safety Lock
Description
It sets safe lock function.
――Enter your 4 digit PIN number. The default PIN number is “0-0-0-0".
If you want to change the PIN number, use the Change PIN function.
All the menus and buttons of the product and remote control, except for the LOCK button on the
remote control, will be locked by the Safety Lock function.
To unlock the menus and buttons, press the LOCK button and then enter the password (default
password: 0 - 0 - 0 - 0).
General
Power On Button
Turn on this feature to enable the remote control's Power button to turn on the device while Safety
Lock is enabled.
USB Auto Play Lock
Select whether to automatically play MagicInfo content saved on a connected USB device.
Smart Security
The security provided to protect your display device and connected storage devices against viruses
includes.
HDMI Hot Plug
This feature is used to activate the time delay to turn on a DVI/HDMI source device.
DivX® Video On Demand
Shows the registration code authorised for the product.
If you connect to the DivX® web site and register using that code, you can download the VOD
registration file.
For more information about DivX® VOD, visit “http://vod.divx.com”.
Reset System
This option returns the current settings under system to the default factory settings.
70
Support
Main menu
Sub menu
Settings
Support
Software Update
Update now
Update the software to the latest version.
Auto update
This feature automatically updates the product when not in use.
Contact Samsung
Description
View this information when your product does not work properly or when you want to upgrade the
software.
You can find information regarding our call centres and how to download products and software.
――Contact Samsung and find the product Model Code and Software Version.
Go to Home
Accessible using the HOME
Reset All
This option returns all the current settings for a display to the default factory settings.
button on the remote control.
71
Chapter 07
Playing photos and videos (Media Play)
Play video and photo files saved on a USB mass storage class (MSC) device.
SBB-IS08E does not support the sound function.
View photo and video files saved on a storage device.
Play a variety of content using the following methods.
•• Using a USB device: Play media content, such as videos and photos, saved on a USB device.
•• Connecting a storage device: Play media content saved on a storage device such as a smartphone, camera, PC or cloud service.
Read the following before using media play with a USB device
Caution
•• Before connecting a USB device to the product, back up files to ensure your data is not damaged or lost.
Samsung Electronics is not liable for any damage or loss of data.
•• Do not remove a USB device while it is loading.
•• If a USB device is connected using a USB extension cable, the USB device may not be recognised or files saved on the device may not be able to be read.
•• If the product does not recognise a connected USB device, the files on the USB device may be corrupted or may not be able to be played.
If this occurs, connect the USB device to the PC to format the device, then make sure the device is connected properly.
•• USB HDD greater than 2TB is not supported.
72
Compatible devices with media play
•• Some USB digital cameras, smartphones and audio devices may not be compatible with the product.
•• Media play is only compatible with USB MSC devices.
•• MSC device refers to a Mass Storage Class Bulk-Only Transport device.
Examples of MSC devices include Thumb drives, Flash card readers and USB HDDs. (USB hubs are not supported.)
These MSC devices must be connected directly to a USB port on the product.
•• If more than one Picture Transfer Protocol (PTP) device is connected, only one will work at a time.
•• If multiple MSC devices are connected, some devices may not be recognised. USB devices that require high power (higher than 500mA or 5V) may not
be supported.
•• If an overheating warning message appears when a USB device is connected or used, the USB device may not be recognised or function properly.
•• The screensaver activates if the product is left idle for a period of time specified in Auto Protection Time.
•• Power-saving mode on some external hard disk drives may automatically deactivate after connecting to the product.
File system and formats
•• Media play may not function properly with unlicenced multimedia files.
•• Media Transfer Protocol (MTP) is not supported.
•• Supported file systems include FAT16, FAT32 and NTFS (read only).
•• Media play supports the sequential JPEG format.
It does not support the progressive JPEG format.
•• Images with a higher resolution take longer to be displayed on the screen.
•• The maximum JPEG resolution supported is 15360x8640 pixels.
•• If a file is incompatible or corrupted, a message Not Supported File Format. appears.
•• When sorting files in folder view mode, a maximum of 1000 files can be displayed in each folder.
•• If a USB device contains 8000 files and folders or more, some files and folders may not open.
•• DRM MP3 files downloaded from websites that charge a fee cannot be played.
Digital Rights Management (DRM) refers to a system for protecting the copyrights of data circulated via the Internet or other digital media by enabling
secure distribution and/or disabling illegal distribution of the data.
73
Using a USB device
Connecting a USB device
1
Turn on your product.
2
Connect a USB device containing photo and video files to the USB port.
3
The Player page automatically appears as soon as a USB device connects to the product.
――If only one USB device is connected, files saved on the USB device are displayed automatically.
It is recommended to use a USB HDD
that has a power adapter.
――To view content saved on a USB device, connect the USB device to a USB port on the product.
Removing a USB device
Removing a USB device from Source
1
Press SOURCE on the remote control. Alternatively, go to Source using the OSD menu.
SOURCE → Source
It is recommended to remove a USB
device using the Disconnect USB
Device function.
2
Select USB from Source, and then press the TOOLS button on the remote control. The Options menu is displayed.
3
Select Disconnect USB Device and wait until the USB device is disconnected. The USB device is disconnected.
74
Features provided in the media content list page
SOURCE → Source → USB
The media content list page on a storage device provides the following features.
•• Sort by
Rearrange the media content list under the selected file format in a desired view mode.
–– This menu item is not available if Filter is set to All.
•• Filter
Among Photos and Videos content saved on a storage device, view content files under a desired file format only.
•• Options
–– This menu item is not available if Filter is set to All.
75
Menu items in the media content list page
Option Name
Operations
Photos
Videos
Slide Show
Start a slideshow.
――This menu item is not available if Sort by is set to Folder.
c
Play Selected
Select and play desired content from the media content list.
c
c
Send
Send media content to another storage device. This is similar to the "copy" feature on
PCs.
c
c
Index
Select an index to conveniently locate media content if a storage device contains a lot
of media content.
――Provided indices include dates and alphanumeric characters.
c
c
――This menu item is not available if Sort by is set to Folder.
76
Available buttons and features during photo playback
Pressing the E or TOOLS button displays the following buttons. The RETURN button makes the buttons disappear.
•• Pause / Play
Start or stop a slideshow. Using a slideshow, it is possible to play all photos in a folder.
–– Pressing the INFO button while a
device name is selected will display
information about the selected
device.
–– Pressing the INFO button while a file
is selected will display information
about the selected file.
•• Previous / Next
View the previous or next photo.
•• Settings
Option Name
Slideshow Settings
Operations
Speed: Change the slideshow speed.
Effects: Apply transition effects between photos.
Rotate
Rotate photos.
Zoom
Zoom in on photos up to 4x.
Send
Send open photos to another storage device. This is similar to the "copy" feature on PCs.
Information
View information about a file.
77
Available buttons and features
during video playback
Option Name
Select Scene
Operations
Thumbnails: Select a scene and play the video from the scene.
――Thumbnails is not available if 1) the thumbnail of the video is not extracted yet, 2) the
video contains audio only or 3) the video play time is shorter than 60 seconds.
Pressing the E or TOOLS button displays the following buttons. The
RETURN button makes the buttons disappear.
Chapter Titles: Select and play another video in the same folder.
Time Bar: You can use the l and r buttons to scan through the file in 10-second intervals
or enter a specific time value to jump to that point in the video.
•• Pause / Play
Pause or play a video.
•• Rewind / Fast Forward
Rewind or fast forward a video. Speed up playback up to 3x, if
required. To change the playback speed to the original speed, select
∂.
Subtitle
Language / Sync / Reset Sync / Size / Encoding
――If the subtitle is displayed incorrectly, change Encoding options.
Repeat
Configure Repeat.
Off
•• Previous / Next
To play the previous video, select  twice. Selecting  once will play
the current video from the beginning.
Repeat One: Play the current video repeatedly.
Repeat All: Play all videos in a folder repeatedly.
To play the next video, select ‚.
•• Settings
Rotate
Rotate an image.
Picture Size
Change the screen size (Picture Size). Supported screen sizes vary depending on the
image.
Information
View information about a file.
78
Supported Subtitle and Media play file formats
Subtitle
External
Internal
•• MPEG-4 timed text (.ttxt)
•• Xsub
Container: AVI
•• SAMI (.smi)
•• SubStation Alpha
Container: MKV
•• SubRip (.srt)
•• SubViewer (.sub)
•• Advanced SubStation Alpha
Container: MKV
•• Micro DVD (.sub or .txt)
•• SubStation Alpha (.ssa)
•• SubRip
Container: MKV
•• Advanced SubStation Alpha (.ass)
•• Powerdivx (.psb)
•• MPEG-4 timed text
Container: MP4
Supported image resolutions
File Extension
Type
Resolution
*.jpg, *.jpeg
JPEG
15360 x 8640
*.png
PNG
1920 x 1080
*.bmp
BMP
1920 x 1080
*.mpo
MPO
15360 x 8640
79
Supported Video Formats
•• Video content will not play, or not play correctly, if there is an error in the content or the container.
•• Video playback is not available if the standard bit rate or frame rate is higher than the frame rate per second specified in the table.
•• If the Index Table is in error, the Seek (Jump) function is not supported.
•• You may experience file stuttering while playing a video through a network connection.
•• The menu may take longer to appear if the video’s bit rate exceeds 10Mbps.
•• Some USB/digital camera devices may not be compatible with the player.
Video Decoder
Supports up to H.264, Level 4.1
H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported.
For all Video codecs except MVC, VP8, VP6:
•• Below 1280 x 720: 60 frame max
•• Above 1280 x 720: 30 frame max
GMC 2 over is not supported.
Supports only BD MVC Spec.
80
File Extension
Container
*.avi
AVI
*.mkv
MKV
*.asf
ASF
*.wmv
MP4
*.mp4
3GP
*.mov
VRO
*.3gp
VOB
*.vro
PS
*.mpg
TS
Video Codec
DivX 3.11 / 4.x / 5.x / 6.x
Resolution
1920 x 1080
Frame rate
(fps)
6~30
Bit rate
(Mbps)
30
MPEG4 SP / ASP
H.264 BP / MP / HP
Motion JPEG
*.mpeg
*.ts
Window Media Video v9
*.tp
*.trp
MPEG2
*.mov
*.flv
MPEG1
*.vob
*.svi
*.m2ts
*.mts
*.divx
*.webm
WebM
VP6
640 x 480
MVC
1920 x 1080
VP8
4
24 / 25 / 30
40
6 ~ 30
8
81
Chapter 08
Troubleshooting Guide
Requirements Before Contacting Samsung Customer Service Centre
Before calling Samsung Customer
Service Centre, test your product
as follows. If the problem persists,
contact Samsung Customer Service
Centre.
Testing the Product
Check if your product is operating normally by using the product test function.
If the screen remains blank while the power LED blinks even when the product is correctly connected to a PC, perform product testing.
If the screen remains blank, check the
PC system, video controller and cable.
1
Power off both the PC and product.
2
Disconnect all the cables from the product.
3
Power on the product.
4
If No Signal is displayed, the product is operating normally.
Checking the Resolution and Frequency
Not Optimum Mode will briefly be displayed if a mode that exceeds a supported resolution is selected
(refer to Supported Resolutions).
82
Check the followings.
Installation issue (PC mode)
The screen keeps switching on and off.
Check the cable connection between the product and PC, and ensure the connection is
secure.
Blank spaces are found on all four sides of the screen when
an HDMI or HDMI-DVI cable is connected to the product
and PC.
The blank spaces found on the screen have nothing to do with the product.
Blank spaces on the screen are caused by the PC or graphics card. To resolve the problem,
adjust the screen size in the HDMI or DVI settings for the graphics card.
If the graphics card settings menu does not have an option to adjust the screen size, update
the graphics card driver to the latest version.
(Please contact the graphics card or computer manufacturer for further details about how to
adjust the screen settings.)
Screen issue
The power LED is off. The screen will not switch on.
Make sure that the power cord is connected.
No Signal is displayed on the screen.
Check that the product is connected correctly with a cable.
Check that the device connected to the product is powered on.
Not Optimum Mode is displayed.
This message is displayed when a signal from the graphics card exceeds the product's
maximum resolution and frequency.
Refer to the Standard Signal Mode Table and set the maximum resolution and frequency
according to the product specifications.
The images on the screen look distorted.
Check the cable connection to the product
The screen is not clear. The screen is blurry.
Remove any accessories (video extension cable, etc) and try again.
Set the resolution and frequency to the recommended level.
83
Screen issue
The screen appears unstable and shaky.
There are shadows or ghost images left on the screen.
Check that the resolution and frequency of the PC and graphics card are set within a range
compatible with the product. Then, change the screen settings if required by referring to the
Additional Information on the product menu and the Standard Signal Mode Table.
The screen is too bright. The screen is too dark.
Adjust Brightness and Contrast.
Screen colour is inconsistent.
Go to Picture and adjust the Colour Space settings.
White does not really look white.
Go to Picture and adjust the White Balance settings.
There is no image on the screen and the power LED blinks
every 0.5 to 1 second.
The product is in power-saving mode.
The product will turn off automatically.
Go to System and make sure Sleep Timer is set to Off.
Press any key on the keyboard or move the mouse to return to the previous screen.
If a PC is connected to the product, check the power status of the PC.
Make sure the power cable is connected properly to the product and power outlet.
If the signal from a connected device is not detected, the product automatically turns off
after 10 to 15 minutes.
Picture quality of the product is different from the dealer
shop where it was purchased.
Use an HDMI cable to obtain high-definition (HD) picture quality.
The screen display does not look normal.
Encoded video content may cause the display to appear corrupted in scenes featuring fast
moving objects such as in a sports event or action video.
Low signal level or low picture quality may cause the display to appear corrupted. This does
not mean the product is defective.
A cell phone within a distance of one-meter radius may cause static on analogue and digital
products.
84
Screen issue
The brightness and colour do not look normal.
Go to Picture and adjust the screen settings such as Picture Mode, Colour, Brightness and
Sharpness.
Go to System and adjust the Energy Saving settings.
Reset the screen settings to the default settings.
Broken lines are displayed on the edges of the screen.
If Picture Size is set to Screen Fit, change the setting to 16:9.
Lines (red, green or blue) are displayed on the screen.
These lines are displayed when there is a defect in DATA SOURCE DRIVER IC on the monitor.
Contact a Samsung Service Centre to resolve the issue.
The display looks unstable and then freezes.
The screen may freeze when a resolution other than the recommended resolution is used or
if the signal is not stable. To resolve the issue, change the PC resolution to the recommended
resolution.
The screen cannot be displayed in full screen.
A scaled SD (4:3) content file can cause black bars on both sides of an HD channel screen.
A video with an aspect ratio different from the product can cause black bars at the top and
bottom of the screen.
Change the screen size setting to full screen on the product or source device.
85
Remote control issue
The remote control does not work.
Make sure that the batteries are correctly in place (+/-).
Check if the batteries are flat.
Check for power failure.
Make sure that the power cord is connected.
Check for any special lighting or neon signs switched on in the vicinity.
Source device issue
A beeping sound is heard when my PC is booting.
If a beeping sound is heard when your PC is booting, have your PC serviced.
Other issue
The product smells like plastic.
The plastic smell is normal and disappears over time.
Video playback is choppy.
Check the cable connection and connect it again if required.
Using an excessively hard or thick cable may cause choppy video playback.
Make sure cables are flexible enough to ensure durability. When mounting the product onto a
wall, it is recommended to use right-angle cables.
Small particles are found on the edges of the product.
The particles are part of the product design. The product is not defective.
When I try to change the PC resolution, a message "The
defined resolution is not supported." appears.
The message "The defined resolution is not supported." appears if the input source resolution
exceeds the maximum resolution of the display.
To resolve the issue, change the PC resolution to a resolution supported on the display.
HDMI Black Level is not functioning properly on an HDMI
device with YCbCr output.
This function is available only when a source device, such as a DVD player and STB, is
connected to the product via an HDMI (RGB signal) cable.
86
Other issue
The IR sensor is not functioning.
Make sure the sensor light turns on when a button is pressed on the remote control.
•• If the light does not turn on, turn the power switch off and then on again.
If the sensor light still does not turn on after the power switch is turned off and then on
again, an internal jack may be disconnected.
Contact your nearest service centre to have the product serviced.
In power-saving mode, when the input source is
DisplayPort, PC display settings cannot be saved.
Go to System → General and set Max. Power Saving to Off. Alternatively, configure the PC
display output settings again. Ensure the set is turned on.
When booting the PC with the input source set to
DisplayPort, the BIOS and booting screens do not appear.
Boot the PC when the set is turned on or when the input source is not DisplayPort.
87
Q&A
Question
How can I change the frequency?
Answer
Set the frequency on your graphics card.
•• Windows XP: Go to Control Panel → Appearance and Themes → Display → Settings →
Advanced → Monitor and adjust the frequency in Monitor Settings.
•• Windows ME/2000: Go to Control Panel → Display → Settings → Advanced → Monitor
and adjust the frequency in Monitor Settings.
–– Refer to the user manual for your
PC or graphics card for further
instructions on adjustment.
•• Windows Vista: Go to Control Panel → Appearance and Personalization → Personalize →
Display Settings → Advanced Settings → Monitor and adjust the frequency in
Monitor Settings.
•• Windows 7: Go to Control Panel → Appearance and Personalization → Display →
Adjust resolution → Advanced Settings → Monitor and adjust the frequency in
Monitor Settings.
•• Windows 8: Go to Settings → Control Panel → Appearance and Personalization →
Display → Adjust resolution → Advanced Settings → Monitor and adjust the frequency in
Monitor Settings.
How can I change the resolution?
•• Windows XP: Go to Control Panel → Appearance and Themes → Display → Settings and
adjust the resolution.
•• Windows ME/2000: Go to Control Panel → Display → Settings and adjust the resolution.
•• Windows Vista: Go to Control Panel → Appearance and Personalization → Personalize →
Display Settings and adjust the resolution.
•• Windows 7: Go to Control Panel → Appearance and Personalization → Display →
Adjust Resolution and adjust the resolution.
•• Windows 8: Go to Settings → Control Panel → Appearance and Personalization →
Display → Adjust Resolution and adjust the resolution.
88
Question
How do I set powersaving mode?
Answer
•• Windows XP: Set power-saving mode in Control Panel → Appearance and Themes →
Display → Screen Saver Settings or BIOS SETUP on the PC.
•• Windows ME/2000: Set power-saving mode in Control Panel → Display →
Screen Saver Settings or BIOS SETUP on the PC.
•• Windows Vista: Set power-saving mode in Control Panel → Appearance and
Personalization → Personalize → Screen Saver Settings or BIOS SETUP on the PC.
•• Windows 7: Set power-saving mode in Control Panel → Appearance and Personalization
→ Personalize → Screen Saver Settings or BIOS SETUP on the PC.
•• Windows 8: Set power-saving mode in Settings → Control Panel →
Appearance and Personalization → Personalize → Screen Saver Settings or BIOS SETUP
on the PC.
89
Chapter 09
Specifications
General
Model Name
SBB-IS08E
Power Supply
Environmental
considerations
Supported models
AC 100 to 240 VAC (+/- 10%), 60 / 50 Hz ± 3 Hz
Refer to the label at the back of the product as the standard voltage can vary in different countries.
Operating
Temperature : 0 C - 40 C (32 F - 104 F)
Humidity : 10% - 80%, non-condensing
Storage
Temperature : -20 C - 45 C (-4 F - 113 F)
Humidity : 5% - 95%, non-condensing
IL015E, IL020F, IL025E, IS015F, IS020F, IS025F
90
Model Name
Cabinet
Power Supply
Environmental
considerations
IL015E / IS015F
IL020F
IS020F
IL025E / IS025F
Pixel Pitch
1.5 mm
2.0 mm
2.5 mm
LED pixel configuration
3-in-1(R/G/B in 1 LED)
3-in-1(R/G/B in 1 LED)
3-in-1(R/G/B in 1 LED)
LED pixel size (W x H)
1.0 mm x 1.0 mm
1.0 mm x 1.0 mm
Pixels (Row x Column)
320 x 360 pixels
240 x 270 pixels
192 x 216 pixels
Aspect ratio (W:H)
8:9
8:9
8:9
Line input voltage
range
AC 100 to 240 VAC (+/- 10%)
Line input freq. range
60 / 50 Hz ± 3 Hz
Operating
Temperature : 0 C - 40 C (32 F - 104 F)
Humidity : 10% - 80%, non-condensing
Storage
Temperature : -20 C - 45 C (-4 F - 113 F)
Humidity : 5% - 95%, non-condensing
1.5 mm x 1.6 mm
2.1 mm x 2.1 mm
――Plug-and-Play
This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system
optimises the monitor settings. Monitor installation takes place automatically. However, you can customise the installation settings if desired.
――This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate
measures.
――For detailed device specifications, visit the Samsung Electronics website.
91
Preset Timing Modes
――This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a
resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution
specified for your product.
Model Name
Synchronization
Resolution
SBB-IS08E
IL015E / IL025E / IS015F / IS025F
IL020F / IS020F
Horizontal Frequency
30 – 81 kHz
-
-
Vertical Frequency
24 – 75 Hz
-
-
Refresh rate
-
2500 Hz
3660 Hz
Video Frame rate
-
50/60 Hz
Optimum Resolution
1920 x 1080 @ 60 Hz
Maximum Resolution
1920 x 1080 @ 60 Hz
The screen will automatically be adjusted if a signal that belongs to the following standard signal modes is transmitted from your PC. If the signal
transmitted from the PC does not belong to the standard signal modes, the screen may be blank with the power LED on. In such a case, change the settings
according to the following table by referring to the graphics card user manual.
Resolution
Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
IBM, 720 x 400
31.469
70.087
28.322
-/+
MAC, 640 x 480
35.000
66.667
30.240
-/-
MAC, 832 x 624
49.726
74.551
57.284
-/-
MAC, 1152 x 870
68.681
75.062
100.000
-/-
VESA, 640 x 480
31.469
59.940
25.175
-/-
VESA, 640 x 480
37.861
72.809
31.500
-/-
92
–– Horizontal Frequency
The time required to scan a single
line from the left to the right side of
the screen is called a horizontal cycle.
The reciprocal number of a horizontal
cycle is called horizontal frequency.
Horizontal frequency is measured in
kHz.
–– Vertical Frequency
The product displays a single image
multiple times per second (like a
fluorescent light) to display what
the viewer sees. The rate of a single
image being displayed repeatedly per
second is called vertical frequency
or refresh rate. Vertical frequency is
measured in Hz.
Resolution
Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
VESA, 640 x 480
37.500
75.000
31.500
-/-
VESA, 800 x 600
35.156
56.250
36.000
+/+
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 800 x 600
48.077
72.188
50.000
+/+
VESA, 800 x 600
46.875
75.000
49.500
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
VESA, 1024 x 768
56.476
70.069
75.000
-/-
VESA, 1024 x 768
60.023
75.029
78.750
+/+
VESA, 1152 x 864
67.500
75.000
108.000
+/+
VESA, 1280 x 720
45.000
60.000
74.250
+/+
VESA, 1280 x 800
49.702
59.810
83.500
-/+
VESA, 1280 x 1024
63.981
60.020
108.000
+/+
VESA, 1280 x 1024
79.976
75.025
135.000
+/+
VESA, 1366 x 768
47.712
59.790
85.500
+/+
VESA, 1440 x 900
55.935
59.887
106.500
-/+
VESA, 1600 x 900
60.000
60.000
108.000
+/+
VESA, 1680 x 1050
65.290
59.954
146.250
-/+
VESA, 1920 x 1080
67.500
60.000
148.500
+/+
93
Chapter 10
Appendix
Responsibility for the Pay Service (Cost to
Customers)
――When the service is requested, in spite of in warranty, we may charge you for a visit from a
service technician in the following cases.
Not a product defect
Cleaning of the product, Adjustment, Explanation, Re-installation and etc.
•• If a service technician gives instructions on how to use product or simply adjusts options
without disassembling product.
•• If a defect is caused by external environmental factors (Internet, Antenna, Wired Signal,
etc.)
•• If a product is reinstalled or devices are connected additionally after installing the
purchased product for the first time.
•• If a product is reinstalled to move to a different spot or to move to a different house.
•• If customer requests instructions on how to use because of another company's product.
•• If customer requests instructions on how to use the network or another company's
programme.
A Product damage caused by customer's fault
Product damage caused by customer's mishandling or wrong repair
If a product damage is caused by;
•• External impact or drop.
•• Use of supplies or separatly sold product unspecified by Samsung.
•• Repair from a person besides an engineer of outsourcing service company or partner of
Samsung Electronics Co., Ltd.
•• Remodeling or repairing the product by customer.
•• Using it with incorrect voltage or non-authorised electrical connections.
•• Not following the "cautions" in User Manual.
Others
•• If product fails by natural disaster. (lightning, fire, earthquake, flood damage, etc)
•• If consumable components are all used up. (Battery, Toner, Fluorescent lights, Head,
Vibrator, Lamp, Filter, Ribbon, etc.)
――If customer requests a service in case the product has no defect, service fee may be charged.
So please read User Manual first.
•• If customer requests software installation and setup for the product.
•• If a service technician removes/cleans dusts or foreign materials inside of the product.
•• If customer requests an installation additionally after purchasing a product through
home-shopping or online.
94
Licence
The terms HDMI and HDMI High-Definition Multimedia Interface, and
the HDMI Logo are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
DivX Certified® to play DivX® video up to HD 1080p, including
premium content.
DivX®, DivX Certified® and associated logos are trademarks of DivX,
LLC and are used under license.
This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video.
To play purchased DivX movies, first register your device at vod.divx.com. Find your
registration code in the DivX VOD section of your device setup menu.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710;
8,656,183; 8,731,369; RE45,052.
Open Source Licence Notice
In the case of using open source software, Open Source Licences are available on the
product menu. Open Source Licence Notice is written only English.
For information on the Open Source Licence Notice, contact the Samsung Customer Centre
or send email to oss.request@samsung.com.
95
Download PDF

advertising