Samsung | HW-K430 | Samsung HW-K430 Quick start guide

HW-K430
User Manual
For further information, refer to the Web Manual.
Web manual : www.Samsung.com → Support →
Product name search → HW-K430
* Design and specifications are subject to change without prior notice.
HW-K430_XM_XP_XS-QG-0825.indd *1
2016-08-26
12:40:24
SAFETY INFORMATION
SAFETY WARNINGS
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates that high voltage is
present inside. It is dangerous to make any
kind of contact with any internal part of this
product.
This symbol indicates that important literature
concerning operation and maintenance has
been included with this product.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Class II product : This symbol indicates that it does not require a safety connection to electrical
earth (ground).
AC voltage : This symbol indicates that the rated voltage marked with the symbol is AC
voltage.
DC voltage : This symbol indicates that the rated voltage marked with the symbol is DC
voltage.
Caution, Consult instructions for use : This symbol instructs the user to consult the user
manual for further safety related information.
WARNING : To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
• This apparatus shall always be connected to a AC outlet with a protective grounding connection.
• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the
mains plug shall be readily operable.
CAUTION
• Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on
the apparatus.
• To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the
power plug must be easily and readily accessible at all times.
· 1 · English
HW-K430_XM_XP_XS-QG-0825.indd 1
2016-08-26
12:40:51
PRECAUTIONS
1. Ensure that the AC power supply in your house complies with the power requirements listed on the identification
sticker located on the back of your product. Install your product horizontally, on a suitable base (furniture), with
enough space around it for ventilation (7~10 cm). Make sure the ventilation slots are not covered. Do not place the
unit on amplifiers or other equipment which may become hot. This unit is designed for continuous use. To fully turn
off the unit, disconnect the AC plug from the wall outlet. Unplug the unit if you intend to leave it unused for a long
period of time.
2. During thunderstorms, disconnect the AC plug from the wall outlet. Voltage peaks due to lightning could damage
the unit.
3. Do not expose the unit to direct sunlight or other heat sources. This could lead to overheating and cause the unit
to malfunction.
4. Protect the product from moisture (i.e. vases), and excess heat (e.g. a fireplace) or equipment creating strong
magnetic or electric fields. Disconnect the power cable from the AC supply if the unit malfunctions. Your product is
not intended for industrial use. It is for personal use only. Condensation may occur if your product has been stored
in cold temperatures. If transporting the unit during the winter, wait approximately 2 hours until the unit has reached
room temperature before using.
5. The batteries used with this product contain chemicals that are harmful to the environment.
Do not dispose of batteries in the general household trash. Do not dispose of batteries in a fire. Do not short circuit,
disassemble, or overheat the batteries. There is a danger of explosion if the battery is incorrectly replaced. Replace
only with the same or equivalent type.
WARNING, DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD,
The remote control supplied with this product contains a coin/button cell battery. If the coin/button cell battery is
swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries
away from children. If the battery compartment does not close securely, stop using the product and keep it away from
children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate
medical attention.
· 2 · English
HW-K430_XM_XP_XS-QG-0825.indd 2
2016-08-26
12:40:52
CHECKING THE COMPONENTS
Soundbar Main Unit
Top
3 AC/DC Adapter
4 Power Cord
Right Side of the Soundbar
Remote Control /
Battery
Subwoofer
Optical Cable
1 AC/DC Adapter
Micro USB to USB
adapter Cable
2 Power Cord
CONNECTING ELECTRICAL POWER
Use the power components (1, 2, 3, 4) to connect the power supplies in the following order:
Subwoofer  Soundbar Main Unit
c For more information about the power supply and power consumption, refer to the label attached to the
product. (Label : Bottom of the Soundbar Main Unit)
Rear of Subwoofer
Bottom of the Soundbar Main Unit
DC 24V
24
4V
4 Power Cord
2 Power Cord
3 AC/DC
Adapter
1 AC/DC
Adapter
DC 24V
DC 19V
(Power Jack)
Connecting
electrical power
DC 24V
(Power Jack)
Connecting
electrical power
c Make sure to rest the AC/DC Adapter flat on a table or the floor. If you place the AC/DC Adapter so that it is
hanging with the AC cord input facing upwards, water or other foreign substances could enter the Adapter
and cause the Adapter to malfunction.
· 3 · English
HW-K430_XM_XP_XS-QG-0825.indd 3
2016-08-26
12:40:52
CONNECTING THE SUBWOOFER TO THE SOUNDBAR
MAIN UNIT
You can enjoy rich bass tones and better sound quality by linking the subwoofer to the Soundbar main unit.
Soundbar Main Unit
Subwoofer
The Soundbar main unit and subwoofer should link (connect wirelessly) automatically when the Soundbar main
unit and subwoofer are turned on. When auto-connection is complete, the blue indicator on the rear of the
subwoofer stops blinking and glows blue continuously. The subwoofer's LED indicator modes are listed below:
blue
Auto-connection is complete.
blue
blinking
Auto-connection is not complete.
blue
not lit
is
a. Is the power cord plugged into the outlet? If not, connect the power plug to the outlet.
b. If the power cord is plugged in correctly, check the Soundbar main unit.
If your Soundbar main unit is off (in standby mode), the subwoofer will also be in
standby mode and the blue LED won't be lit.
c If the indicator on the rear of the subwoofer does not glow continuously in blue, the subwoofer has not
connected. If this occurs, follow the directions below to connect the subwoofer manually.
c Important: Before you begin, put the battery into the remote. See page 13 for instructions.
· 4 · English
HW-K430_XM_XP_XS-QG-0825.indd 4
2016-08-26
12:40:55
Link indicator
1. Plug the power cords of the Soundbar main unit and subwoofer into an AC wall outlet.
2. Press the ID SET button on the rear of the subwoofer with a small, pointed object for 5 seconds.
c The LINK indicator (Blue LED) on the subwoofer blinks quickly.
3. Press the
button on your remote control for 5 seconds while the Soundbar main unit is turned OFF.
4. The ID SET message appears on the display of the Soundbar main unit for a short period of time, and then
disappears.
ID SET
5. While the subwoofer's indicator is flashing blue, press the
side of the Soundbar to turn on the Soundbar main unit.
button on your remote control or on the right
6. The connection is complete if the indicator on the rear of the subwoofer stops flashing and glows
continuously.
c If the connection process fails, the blue indicator will flash continuously. Go to Step 2 and start again.
Expand to true wireless surround sound by connecting the Samsung Wireless Rear
Speaker Kit (SWA-8000S) to your Soundbar. (Sold separately)
c For further information, refer to the Web Manual.
· 5 · English
HW-K430_XM_XP_XS-QG-0825.indd 5
2016-08-26
12:41:12
CONNECTING TO YOUR TV
You can enjoy TV sound after connecting the Soundbar to your TV with or without a cable.
c Important: Before you begin, put the battery into the remote. See page 13 for instructions.
Method 1. Connecting with a Cable
Check the DIGITAL AUDIO IN (OPTICAL)
port of the Soundbar main unit.
Check the OPTICAL OUT
port of your TV.
Optical Cable
DIGITAL AUDIO IN
(OPTICAL)
OPTICAL OUT
DIGITAL AUDIO IN
(OPTICAL)
DC 24
24V
4V
USB (5V 0.5A)
AUX IN
Bottom of the Soundbar
1. Connect the DIGITAL AUDIO IN (OPTICAL) jack on the Soundbar to the OPTICAL OUT jack of the TV with
a digital optical cable.
2. Press the
button on the right side of the Soundbar or the SOURCE button on the remote control to
select the D.IN mode.
D.IN
c If TV sound is not output, press the
button on the right side of your Soundbar or the SOURCE button
on the remote control to select the D.IN mode on Soundbar main unit display.
c Press the  button on the remote control for 5 seconds to turn Auto Power Link on or off.
(Auto Power Link is set to ON by default.)
· 6 · English
HW-K430_XM_XP_XS-QG-0825.indd 6
2016-08-26
12:41:23
Method 2. TV SoundConnect (Linking to a Samsung TV with Bluetooth)
1. Turn on your Samsung TV and the Soundbar.
2. Select TV mode in your Soundbar's display by pressing the
button on the right side of the Soundbar or
the SOURCE button on your remote control. (Modes are displayed in the following order: D.IN → AUX →
BT → TV → USB.)
3. When the connection message shown below appears on the TV screen, select <Yes> with your TV remote
control.
Samsung Audio Device detected.
Do you want to hear TV sound
through this device?
Yes
No
Select <Yes> with your TV remote control.
4. The Soundbar outputs TV sound.
c If the TV SoundConnect linking process fails, navigate to SoundConnect in the TV's Sound menu, select
Add New Device, and set Add New Device to ON. Then, try again.
c If your Soundbar is connected to your TV through TV SoundConnect, you can conveniently control the
volume with the Soundbar's remote or the TV's remote. You can also have the Soundbar turn on and off
automatically when you turn the TV on or off by setting the Bluetooth POWER On function to On.
See page 14.
c The TV SoundConnect (Soundshare) function is only available in some Samsung TV products released since
2012.
c If you want to disconnect the existing connection to your TV and establish a new connection to another TV,
press the & button on your remote control for more than 5 seconds.
c In the TV SoundConnect mode, the Soundbar cannot be paired to another Bluetooth device.
c Do not place electronic devices or metallic objects on top of the product.
e.g., Wired/wireless router, set-top box, or modem.
c Placing the product on the floor may degrade wireless network performance, depending on the floor material.
· 7 · English
HW-K430_XM_XP_XS-QG-0825.indd 7
2016-08-26
12:41:26
CONNECTION VIA BLUETOOTH
You can connect a Bluetooth device to the Soundbar and enjoy music with stereo sound, all without wires!
c It is not possible to connect multiple Bluetooth devices at the same time.
Connect
Bluetooth device
1. Press the
select BT.
button on the right side of the Soundbar or the SOURCE button on the remote control to
2. Select the Bluetooth menu on the Bluetooth device you want to connect. (Refer to the Bluetooth device's
user manual.)
3. Select "[AV] Samsung Soundbar Kxxx K-Series" from the list.
• When the connection is established between the Soundbar and Bluetooth device, the front display
window of the Soundbar displays [Bluetooth device name] → BT.
4. Play music on the connected device.
[If failed to connect to the Bluetooth device / If device searching is needed again]
• Delete the previous "[AV] Samsung Soundbar Kxxx K-Series" found by the Bluetooth device and have it
search for the Soundbar again.
c If asked for a PIN code when connecting a Bluetooth device, enter <0000>.
c In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Soundbar
and the Bluetooth device exceeds 10 meters.
c The Soundbar automatically turns off after 5 minutes in the Ready state.
c The Soundbar may not perform Bluetooth search or connection correctly under the following
circumstances:
– If there is a strong electrical field around the Soundbar.
– If several Bluetooth devices are simultaneously paired with the Soundbar.
– If the Bluetooth device is turned off, not in place, or malfunctions.
c Electronic devices may cause radio interference. Devices that generate electromagnetic waves must be
kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.
Disconnecting the Soundbar from the Bluetooth device
Press the SOURCE button on the remote control or the
BT to another mode or turn off the Soundbar
button on the product's right side to switch from
• The connected Bluetooth device will wait a certain amount of time for a response from the Soundbar before
terminating the connection. (Disconnection time may differ, depending on the Bluetooth device)
· 8 · English
HW-K430_XM_XP_XS-QG-0825.indd 8
2016-08-26
12:41:29
CONNECTING TO AN EXTERNAL DEVICE
Optical Cable
You can enjoy sound from separate external devices such as a BD player/game console/set-top box, etc. by
connecting them to your Soundbar.
Soundbar
DIGITAL AUDIO IN
(OPTICAL)
Optical Cable
External Device
OPTICAL OUT
Bottom of Soundbar
1. Connect an Optical Cable as shown in the illustration above.
2. Press the
button on the right side of your Soundbar or the SOURCE button on your remote control to
select D.IN mode.
3. The Soundbar shows D.IN on its display and outputs sound from the external device.
USB
You can play music files located on USB storage devices through the Soundbar.
USB port
Display
DIGITAL AUDIO IN
(OPTICAL)
DC 24V
24
4V
USB (5V 0.5A)
AUX IN
USB (5V 0.5A)
Micro USB to
USB adapter Cable
1. Connect a Micro USB to USB adapter cable with a male USB 2.0 Micro USB plug (Type B) on one end and a
standard female 2.0 USB jack (Type A) on the other end to the micro USB jack on your Soundbar.
2. Connect your USB device to the female end of the adapter cable.
button on the Soundbar main unit’s right side or the SOURCE button on the remote control to
3. Press the
select the USB mode.
4. USB appears on the display screen.
●
The Soundbar connection to the USB device is complete.
●
The Soundbar automatically turns off (Auto Power Off) if no USB device has been connected for more
than 5 minutes.
· 9 · English
HW-K430_XM_XP_XS-QG-0825.indd 9
2016-08-26
12:41:30
• Purchase wall mounting screws according to the
type and thickness of the wall you will mount the
Soundbar on.
SOFTWARE UPDATE
Samsung may offer updates for the Soundbar's
system firmware in the future.
– Diameter : M5
– Length: 35 mm or longer recommended.
• Connect cables from the unit to external devices
before you install it on the wall.
DIGITAL AUDIO IN
(OPTICAL)
4V
V
DC 24V
USB (5V 0.5A)
AUX IN
• Make sure the unit is turned off and unplugged
before you install it. Otherwise, it may cause an
electric shock.
USB (5V 0.5A)
Micro USB to
USB adapter Cable
Wallmount Components
(Wall Mount L)
If an update is offered, you can update the firmware
by connecting a USB device with the firmware update
stored on it to the USB port on your Soundbar.
For more information about how to download update
files, go to the Samsung Electronics website at
(samsung.com/sec)  search for the model name 
download the firmware from the customer support
menu option. The option name can vary.
INSTALLING THE WALL
MOUNT
(Wall Mount R)
Bracket-Wall Mount (2 EA)
Holder-Screw (2 EA)
A
You can use the wall mount bracket to mount this unit
on a wall.
B
Screw (2 EA)
CENTER LINE
A-TYPE : 616mm
B-TYPE : 360mm
B
A
Wall Mount Guide
Installation Precautions
• Install on a vertical wall only.
• Do not install the Soundbar system in a location
with high temperature and/or humidity. Install the
system on a stable wall that can bear the weight of
the Soundbar main unit.
• Check the strength of the wall. To install the
Soundbar system on a wall that may not bear the
Soundbar main unit weight, reinforce the wall
before installation. If this is not possible, install the
system on another wall, one stable enough to bear
the weight of the Soundbar main unit.
• Purchase and use the fixing screws or anchors
appropriate for the kind of wall you have (plaster
board, iron board, wood, etc.). If possible, fix the
support screws into wall studs.
· 10 · English
HW-K430_XM_XP_XS-QG-0825.indd 10
2016-08-26
12:41:44
1. Place the Wall Mount Guide against the wall
surface.
The Wall Mount Guide must be level.
If your TV is mounted on the wall, install the
Soundbar at least 5 cm below the TV.
●
●
c If the markings do not correspond to the
positions of studs, make sure you insert
appropriate anchors or mollies into the holes
before you insert the support screws. If you use
anchors or mollies, make sure the holes you drill
are large enough for the anchors or mollies you
use.
5 cm or more
5. Push a screw (not supplied) through each
Holder-Screw, and then screw each screw
firmly into a support screw hole.
2. Align the Paper Template's Centre Line with the
centre of your TV (if you are mounting the
Soundbar below your TV), and then fix the Wall
Mount Guide to the wall using tape.
c If you are not mounting below a TV, place the
Centre Line in the centre of the installation area.
6. Use the two Screws (M4 x L12) to attach both
Bracket-Wall Mount L and R to the Soundbar's
bottom. For a proper fit, make sure to align the
bumps on the Soundbar to the holes on the
brackets.
A
B
CENTER LINE
A-TYPE : 616mm
B-TYPE : 360mm
B
A
Centre Line
3. Push a pen tip or sharpened pencil tip through the
centre of the B-TYPE images on each end of the
Guide to mark the holes for the supporting
screws, and then remove the Wall Mount Guide.
4. Using an appropriately sized drill bit, drill a hole in
the wall at each marking.
· 11 · English
HW-K430_XM_XP_XS-QG-0825.indd 11
2016-08-26
12:41:46
●
When assembling, make sure the hanger part
of the Bracket-Wall Mounts faces
backwards.
Rear Side of Soundbar
Right end of Soundbar
●
The left and right mounts are different shapes.
Make sure to position them correctly.
Wall Mount R
Wall Mount L
7. Install the Soundbar with the attached BracketWall Mounts by hanging the Bracket-Wall
Mounts on the Holder-Screws on the wall.
●
Slightly tilt the Soundbar to insert both
Holder-Screw heads into Bracket-Wall
Mount holes. Push the Soundbar in the
direction of the arrow to make sure both sides
are firmly fixed.
DETACHING THE SOUNDBAR
FROM THE WALL
1. To separate the Soundbar from the wall, push it in
the direction of the arrow, lift up the left side
slightly, and then pull it away from the wall as
shown.
c Do not hang onto the installed unit and avoid
striking or dropping the unit.
c Secure the unit firmly to the wall so that it does
not fall off. If the unit falls off, it may cause an
injury or damage the product.
c When the unit is installed on a wall, please make
sure that children do not pull any of the
connecting cables, as this may cause it to fall.
c For the optimal performance of a wall mount
installation, install the speaker system at least
5 cm below the TV if the TV is mounted on the
wall.
c For your safety, if you do not mount the unit on
the wall, install it on a secure, flat surface where it
is unlikely to fall.
· 12 · English
HW-K430_XM_XP_XS-QG-0825.indd 12
2016-08-26
12:41:47
REMOTE CONTROL BUTTONS & FEATURES
Inserting Battery before using the Remote Control
1. Use a suitable coin to turn the remote control's battery cover
counterclockwise to remove it as shown in the figure below.
2. Insert a 3V lithium battery. Keep the positive (+) pole facing up when
inserting the battery. Put the battery cover on, and then align the '●'
marks side by side as shown in the figure below.
3. Use a suitable coin to turn the remote control battery cover clockwise
as far as it will go to fix it in place.



Controlling the Soundbar using Your TV Remote
Control
1. Press and hold the
SOUND button for more than 5 seconds while
the Soundbar is turned on.
2. "ON - TV REMOTE" appears on the Soundbar's display.
3. In the TV's menu, set the TV speaker to external speaker.
buttons are available to control the
c Only the VOL +/- and
Soundbar.
c TV menus differ by manufacturer and model. Refer to the TV's user
manual for further information.
c This function is not available when the Soundbar is in the TV
SoundConnect mode.
c Manufacturers supporting this function:
● VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA,
GRUNDIG, Hisense, RCA
● This function may not be compatible with your TV's remote
depending on the remote control's manufacturer.
SOUND button for 5 seconds.
c To turn off this function, press the
"OFF - TV REMOTE" appears on the Soundbar's display.
Turns the Soundbar on and off.
Power
Press to select a source connected to the Soundbar.
SOURCE
· 13 · English
HW-K430_XM_XP_XS-QG-0825.indd 13
2016-08-26
12:41:53
Sets the volume temporarily to 0. Press again to cancel.
Mute
Adjusts the volume level of the unit.
Volume
Play / Pause
Press the & button to pause a music temporarily.
Press the & button again to play the selected music.
Selects the next file.
Skip Forward
Selects the previous file.
Skip Back
Press to set the Repeat function during music playback from a USB device.
• OFF-REPEAT : Cancels Repeat Playback.
Repeat
• TRACK-REPEAT : Plays a track repeatedly.
• ALL-REPEAT : Plays all tracks repeatedly.
• RANDOM-REPEAT : Plays tracks in random order.
The Surround Sound function adds depth and a sense of space to sound.
Each time you press this button, Surround Sound ON and OFF alternates.
Surround Sound
Press to turn the Bluetooth POWER On function on and off.
When the Bluetooth POWER On function is on, ON - BLUETOOTH POWER
appears in the Soundbar’s display.
Bluetooth POWER
You can select from 6 sound modes: STANDARD, MUSIC, CLEAR VOICE, SPORTS,
MOVIE, and NIGHT.
SOUND EFFECT
c NIGHT Mode
When changing a channel or music source, the volume difference between different
music input sources is automatically adjusted to be suitable for listening.
You can select TREBLE, BASS, SUBWOOFER LEVEL or AUDIO SYNC.
SOUND CONTROL
• Press to select TREBLE, BASS, SUBWOOFER LEVEL or AUDIO SYNC.
Then, use the ,  buttons to adjust the TREBLE or BASS volume from -6 ~ +6,
SUBWOOFER LEVEL volume from -12, -6 ~ +6.
• If the video of your TV and the audio of your Soundbar are not synchronized,
select AUDIO SYNC in Sound Settings, and then set audio delay between
0~300 milliseconds by using the ,  buttons.
· 14 · English
HW-K430_XM_XP_XS-QG-0825.indd 14
2016-08-26
12:41:59
The blue indicator on the rear of the subwoofer
is not lit and the subwoofer is not producing
sound.
TROUBLESHOOTING
Before seeking assistance, check the following.
The unit will not turn on.
Is the power cord plugged into the outlet?
Connect the power plug to the outlet.
A function does not work when the button is
pressed.
Is there static electricity in the air?
Disconnect the power plug and connect it again.
Is the Soundbar main unit power on?
Check the power cord. If the power cord is
plugged in correctly, check the Soundbar main
unit. If your main unit is off (in standby mode),
the subwoofer will also be in standby mode and
the blue LED won't be lit.
Your subwoofer may not be connected to the
Soundbar main unit.
Try to connect your subwoofer again.
See page 4.
Sound is not produced.
LICENCE
Is the Mute function on?
Press the
(Mute) button to cancel the function.
Is the volume set to minimum?
Adjust the Volume.
The remote control does not work.
Is the battery drained?
Replace with new battery.
Is the distance between the remote control and
Soundbar main unit too far?
Move the remote control closer to the Soundbar
main unit.
Manufactured under license from Dolby
Laboratories. Dolby, Dolby Audio and the double-D
symbol are trademarks of Dolby Laboratories.
The TV SoundConnect (TV pairing) failed.
For DTS patents, see http://patents.dts.com.
Manufactured under licence from DTS Licencing
Limited. DTS, the Symbol, & DTS and the Symbol
together are registered trademarks, and DTS 2.0
Channel is a trademark of DTS, Inc. © DTS, Inc.
All Rights Reserved.
Does your TV support TV SoundConnect?
TV SoundConnect is supported by some
Samsung TVs released from 2012 on. Check
your TV to see if it supports TV SoundConnect.
Is your TV firmware the latest version?
Update your TV with the latest firmware.
Does an error occur when connecting?
Contact the Samsung Call Centre.
Reset TV SoundConnect and connect again.
To reset the TV SoundConnect connection,
press and hold the p button for 5 seconds.
· 15 · English
HW-K430_XM_XP_XS-QG-0825.indd 15
2016-08-26
12:42:02
OPEN SOURCE LICENCE NOTICE
To send inquiries and requests regarding open sources, contact Samsung via Email (oss.request@samsung.com).
©
IMPORTANT NOTE ABOUT SERVICE
C
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product
appearance.
c
SPECIFICATIONS
USB
5V / 0.5A
Soundbar Main Unit
2.0 kg
Subwoofer (PS-WK430)
2.9 kg
Soundbar Main Unit
908.5 x 53.5 x 70.5 mm
Subwoofer (PS-WK430)
155.0 x 300.0 x 293.0 mm
Weight
GENERAL
AMPLIFIER
Dimensions
(W x H x D)
Operating Temperature Range
+5°C to +35°C
Operating Humidity Range
10 % to 75 %
Rated Output
Power
Soundbar Main Unit
40W x 4, 6 ohm, THD≦10%
Subwoofer (PS-WK430)
60W, 3 ohm, THD≦10%
• Nominal specification
– Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
– Weight and dimensions are approximate.
– For more information about the power supply and power consumption, refer to the label attached to the
product. (Label : Bottom of the Soundbar Main Unit)
· 16 · English
HW-K430_XM_XP_XS-QG-0825.indd 16
2016-08-26
12:42:03
© 2016 Samsung Electronics Co., Ltd. All rights reserved.
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer
care Centre.
Contact Centre 
Area
` Asia Pacific
CHINA
400-810-5858
HONG KONG
3698 4698
MACAU
SINGAPORE
AUSTRALIA
NEW ZEALAND
VIETNAM
THAILAND
MYANMAR
0800 333
1800-SAMSUNG(726-7864)
1300 362 603
0800 726 786
1800 588 889
0-2689-3232, 1800-29-3232
+95-1-2399-888
1800-88-9999
603-77137477 (Overseas contact)
021-56997777
08001128888
1-800-10-726-7864 [ PLDT Toll Free ]
1-800-8-726-7864 [ Globe Landline and Mobile ]
02-422-2111 [ Standard Landline ]
0800-329999
0120-363-905
1800 3000 8282 - Toll Free
1800 266 8282 - Toll Free
0961-2300300
0800-0300300 (Toll free)
0117540540
0115900000
MALAYSIA
INDONESIA
PHILIPPINES
TAIWAN
JAPAN
INDIA
BANGLADESH
SRI LANKA
AH68-02927V-01
HW-K430_XM_XP_XS-QG-0825.indd 17
Web Site
www.samsung.com/cn/support
www.samsung.com/hk/support (Chinese)
www.samsung.com/hk_en/support (English)
www.samsung.com/support
www.samsung.com/sg/support
www.samsung.com/au/support
www.samsung.com/nz/support
www.samsung.com/vn/support
www.samsung.com/th/support
www.samsung.com/my/support
www.samsung.com/id/support
www.samsung.com/ph/support
www.samsung.com/tw/support
www.samsung.com/jp/support
www.samsung.com/in/support
www.samsung.com/support
AH68-02927V-01
2016-08-26
12:42:03
Download PDF